Mercurial > emacs
view configure1.in @ 9732:577db538b0b6
(Fset_buffer_major_mode): New function. Set the default major mode here.
(Fget_buffer_create): Not here.
(Fswitch_to_buffer): Call Fset_buffer_major_mode.
(syms_of_buffer): defsubr the new function.
| author | Karl Heuer <kwzh@gnu.org> |
|---|---|
| date | Thu, 27 Oct 1994 22:35:14 +0000 |
| parents | c1e70445780e |
| children |
line wrap: on
line source
dnl This is an autoconf script. dnl To rebuild the `configure' script from this, execute the command dnl autoconf dnl in the directory containing this script. [#!/bin/sh #### Configuration script for GNU Emacs #### Copyright (C) 1992, 1994 Free Software Foundation, Inc. #### This script requires autoconf version 1.9 or later. ### Don't edit this script! ### This script was automatically generated by the `autoconf' program ### from the file `./configure.in'. ### To rebuild it, execute the command ### autoconf ### in the this directory. ### This file is part of GNU Emacs. ### GNU Emacs is free software; you can redistribute it and/or modify ### it under the terms of the GNU General Public License as published by ### the Free Software Foundation; either version 2, or (at your option) ### any later version. ### GNU Emacs is distributed in the hope that it will be useful, ### but WITHOUT ANY WARRANTY; without even the implied warranty of ### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ### GNU General Public License for more details. ### You should have received a copy of the GNU General Public License ### along with GNU Emacs; see the file COPYING. If not, write to ### the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ### Since Emacs has configuration requirements that autoconf can't ### meet, this file is an unholy marriage of custom-baked ### configuration code and autoconf macros. ### ### We use the m4 quoting characters [ ] (as established by the ### autoconf system) to include large sections of raw sewage - Oops, I ### mean, shell code - in the final configuration script. ### ### Usage: configure config_name ### ### If configure succeeds, it leaves its status in config.status. ### If configure fails after disturbing the status quo, ### config.status is removed. ### Remove any more than one leading "." element from the path name. ### If we don't remove them, then another "./" will be prepended to ### the file name each time we use config.status, and the program name ### will get larger and larger. This wouldn't be a problem, except ### that since progname gets recorded in all the Makefiles this script ### produces, move-if-change thinks they're different when they're ### not. ### ### It would be nice if we could put the ./ in a \( \) group and then ### apply the * operator to that, so we remove as many leading ./././'s ### as are present, but some seds (like Ultrix's sed) don't allow you to ### apply * to a \( \) group. Bleah. progname="`echo $0 | sed 's:^\./\./:\./:'`" ### Establish some default values. run_in_place= single_tree= prefix='/usr/local' exec_prefix='${prefix}' bindir='${exec_prefix}/bin' datadir='${prefix}/share' sharedstatedir='${prefix}/com' libexecdir='${exec_prefix}/libexec' mandir='${prefix}/man/man1' infodir='${prefix}/info' lispdir='${datadir}/emacs/${version}/lisp' locallisppath='${datadir}/emacs/site-lisp' lisppath='${locallisppath}:${lispdir}' etcdir='${datadir}/emacs/${version}/etc' lockdir='${sharedstatedir}/emacs/lock' archlibdir='${libexecdir}/emacs/${version}/${configuration}' docdir='${datadir}/emacs/${version}/etc' # On Sun systems, people sometimes set up the variable CPP # with a value that is a directory, not an executable at all. # Detect that case, and ignore that value. if [ "x$CPP" != x ] && [ -d "$CPP" ]; then CPP= fi # We cannot use this variable in the case statement below, because many # /bin/sh's have broken semantics for "case". Unfortunately, you must # actually edit the clause itself. # path_options="prefix | exec_prefix | bindir | libexecdir | etcdir | datadir" # path_options="$path_options | archlibdir | sharedstatedir | mandir | infodir" # path_options="$path_options | lispdir | lockdir | lisppath | locallisppath" #### Usage messages. short_usage="Usage: ${progname} CONFIGURATION [-OPTION[=VALUE] ...] Set compilation and installation parameters for GNU Emacs, and report. CONFIGURATION specifies the machine and operating system to build for. --with-x Support the X Window System. --with-x=no Don't support X. --with-x-toolkit=yes Use the X toolkit. Default to Lucid/Athena widgets. --with-x-toolkit=athena Use the X toolkit with Athena widgets. --with-x-toolkit=lucid Use the X toolkit with Lucid widgets. --with-x-toolkit=motif Use the X toolkit with Motif widgets. --with-x-toolkit=no Don't use an X toolkit. --with-gcc Use GCC to compile Emacs. --with-gcc=no Don't use GCC to compile Emacs. --x-includes=DIR Search for X header files in DIR. --x-libraries=DIR Search for X libraries in DIR. --run-in-place Use libraries and data files directly out of the source tree. --single-tree=DIR Has the effect of creating a directory tree at DIR which looks like: .../DIR/bin/CONFIGNAME (emacs, etags, etc.) .../DIR/bin/CONFIGNAME/etc (movemail, etc.) .../DIR/common/lisp (emacs' lisp files) .../DIR/common/site-lisp (local lisp files) .../DIR/common/lib (DOC, TUTORIAL, etc.) .../DIR/common/lock (lockfiles) --srcdir=DIR Look for the Emacs source files in DIR. --prefix=DIR Install files below DIR. Defaults to \`${prefix}'. You may also specify any of the \`path' variables found in Makefile.in, including --bindir, --libexecdir, --etcdir, --infodir, and so on. This allows you to override a single default location when configuring. If successful, ${progname} leaves its status in config.status. If unsuccessful after disturbing the status quo, it removes config.status." #### Option processing. ### Record all the arguments, so we can save them in config.status. arguments="$@" ### Shell Magic: Quote the quoted arguments in ARGUMENTS. At a later date, ### in order to get the arguments back in $@, we have to do an ### `eval set x "$quoted_arguments"; shift'. quoted_arguments= for i in "$@"; do quoted_arguments="$quoted_arguments '$i'" done ### Don't use shift -- that destroys the argument list, which autoconf needs ### to produce config.status. It turns out that "set - ${arguments}" doesn't ### work portably. ### However, it also turns out that many shells cannot expand ${10} at all. ### So using an index variable doesn't work either. It is possible to use ### some shell magic to make 'set x "$arguments"; shift' work portably. config_options="$*" while [ $# != 0 ]; do arg="$1"; shift case "${arg}" in ## Anything starting with a hyphen we assume is an option. -* ) ## Separate the switch name from the value it's being given. case "${arg}" in -*=*) opt=`echo ${arg} | sed 's:^-*\([^=]*\)=.*$:\1:'` val=`echo ${arg} | sed 's:^-*[^=]*=\(.*\)$:\1:'` valomitted=no ;; -*) ## If FOO is a boolean argument, --FOO is equivalent to ## --FOO=yes. Otherwise, the value comes from the next ## argument - see below. opt=`echo ${arg} | sed 's:^-*::'` val="yes" valomitted=yes ;; esac ## Change `-' in the option name to `_'. optname="${opt}" opt="`echo ${opt} | tr - _`" ## Process the option. case "${opt}" in ## Has the user specified which window systems they want to support? "with_x" | "with_x11" | "with_x10" ) ## Make sure the value given was either "yes" or "no". case "${val}" in y | ye | yes ) val=yes ;; n | no ) val=no ;; * ) (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value. Set it to either \`yes' or \`no'." echo "${short_usage}") >&2 exit 1 ;; esac eval "${opt}=\"${val}\"" ;; ## Has the user specified which toolkit they want to support? "with_x_toolkit" ) case "${val}" in y | ye | yes ) val=athena ;; n | no ) val=no ;; l | lu | luc | luci | lucid ) val=lucid ;; a | at | ath | athe | athena ) val=athena ;; m | mo | mot | moti | motif ) val=motif ;; # These don't currently work. # o | op | ope | open | open- | open-l | open-lo \ # | open-loo | open-look ) val=open-look ;; * ) ( #echo "${progname}: the \`--${optname}' option is supposed to have a value #which is \`yes', \`no', \`lucid', \`athena', \`motif' or \`open-look'." echo "${progname}: the \`--${optname}' option is supposed to have a value which is \`yes', \`no', \`lucid', \`athena', or \`motif'. Currently, \`yes', \`athena' and \`lucid' are synonyms." echo "${short_usage}") >&2 exit 1 ;; esac eval "${opt}=\"${val}\"" ;; ## Has the user specified whether or not they want GCC? "with_gcc" | "with_gnu_cc" ) ## Make sure the value given was either "yes" or "no". case "${val}" in y | ye | yes ) val=yes ;; n | no ) val=no ;; * ) (echo "${progname}: the \`--${optname}' option is supposed to have a boolean value. Set it to either \`yes' or \`no'." echo "${short_usage}") >&2 exit 1 ;; esac eval "${opt}=\"${val}\"" ;; ## Has the user specified a source directory? "srcdir" ) ## If the value was omitted, get it from the next argument. if [ "${valomitted}" = "yes" ]; then ## Get the next argument from the argument list, if there is one. if [ $# = 0 ]; then (echo "${progname}: You must give a value for the \`--${optname}' option, as in \`--${optname}=FOO'." echo "${short_usage}") >&2 exit 1 fi val="$1"; shift fi srcdir="${val}" ;; ## Has the user tried to tell us where the X files are? ## I think these are dopey, but no less than three alpha ## testers, at large sites, have said they have their X files ## installed in odd places. "x_includes" ) ## If the value was omitted, get it from the next argument. if [ "${valomitted}" = "yes" ]; then ## Get the next argument from the argument list, if there is one. if [ $# = 0 ]; then (echo "${progname}: You must give a value for the \`--${optname}' option, as in \`--${optname}=/usr/local/X11/include'." echo "${short_usage}") >&2 exit 1 fi val="$1"; shift fi x_includes="${val}" ;; "x_libraries" ) ## If the value was omitted, get it from the next argument. if [ "${valomitted}" = "yes" ]; then ## Get the next argument from the argument list, if there is one. if [ $# = 0 ]; then (echo "${progname}: You must give a value for the \`--${optname}' option, as in \`--${optname}=/usr/local/X11/lib'." echo "${short_usage}") >&2 exit 1 fi val="$1"; shift fi x_libraries="${val}" ;; ## Should this use the "development" file organization? "run_in_place" ) single_tree= run_in_place=1 ;; ## Should this use the "single tree" file organization? "single_tree" ) run_in_place= single_tree=1 ;; ## Has the user specified one of the path options? prefix | exec_prefix | bindir | libexecdir | etcdir | datadir | \ archlibdir | sharedstatedir | mandir | infodir | lispdir | lockdir | \ lisppath | locallisppath | docdir ) ## If the value was omitted, get it from the next argument. if [ "${valomitted}" = "yes" ]; then if [ $# = 0 ]; then (echo \ "$progname: You must give a value for the \`--${optname}' option,"; echo \ "as in \`--${optname}=`eval echo '$'$optname`.'" echo "$short_usage") >&2 exit 1 fi val="$1"; shift fi eval "${opt}=\"${val}\"" eval "${opt}_specified=1" ;; ## Verbose flag, tested by autoconf macros. "verbose" ) verbose=yes ;; ## Has the user asked for some help? "usage" | "help" ) if [ "x$PAGER" = x ] then echo "${short_usage}" | more else echo "${short_usage}" | $PAGER fi exit ;; ## We ignore all other options silently. esac ;; ## Anything not starting with a hyphen we assume is a ## configuration name. *) configuration=${arg} ;; esac done ### Get the arguments back. See the diatribe on Shell Magic above. eval set x "$quoted_arguments"; shift if [ "${configuration}" = "" ]; then echo '- You did not tell me what kind of host system you want to configure. - I will attempt to guess the kind of system this is.' 1>&2 guesssys=`echo ${progname} | sed 's/configure$/config.guess/'` if configuration=`${guesssys}` ; then echo "- Looks like this is a ${configuration}" 1>&2 else echo '- Failed to guess the system type. You need to tell me.' 1>&2 echo "${short_usage}" >&2 exit 1 fi fi #### Decide where the source is. case "${srcdir}" in ## If it's not specified, see if `.' or `..' might work. "" ) confdir=`echo $0 | sed 's|//|/|' | sed 's|/[^/]*$||'` if [ -f $confdir/src/lisp.h -a -f $confdir/lisp/version.el ]; then srcdir="${confdir}" else if [ -f "./src/lisp.h" -a -f "./lisp/version.el" ]; then srcdir='.' else if [ -f "../src/lisp.h" -a -f "../lisp/version.el" ]; then srcdir='..' else (echo "\ ${progname}: Neither the current directory nor its parent seem to contain the Emacs sources. If you do not want to build Emacs in its source tree, you should run \`${progname}' in the directory in which you wish to build Emacs, using its \`--srcdir' option to say where the sources may be found." echo "${short_usage}") >&2 exit 1 fi fi fi ;; ## Otherwise, check if the directory they specified is okay. * ) if [ ! -d "${srcdir}" -o ! -f "${srcdir}/src/lisp.h" -o ! -f "${srcdir}/lisp/version.el" ]; then (echo "\ ${progname}: The directory specified with the \`--srcdir' option, \`${srcdir}', doesn't seem to contain the Emacs sources. You should either run the \`${progname}' script at the top of the Emacs source tree, or use the \`--srcdir' option to specify where the Emacs sources are." echo "${short_usage}") >&2 exit 1 fi ;; esac #### Make srcdir absolute, if it isn't already. It's important to #### avoid running the path through pwd unnecessary, since pwd can #### give you automounter prefixes, which can go away. case "${srcdir}" in /* ) ;; . ) ## We may be able to use the $PWD environment variable to make this ## absolute. But sometimes PWD is inaccurate. if [ "${PWD}" != "" ] && [ "`(cd ${PWD} ; sh -c pwd)`" = "`pwd`" ] ; then srcdir="$PWD" else srcdir="`(cd ${srcdir}; pwd)`" fi ;; * ) srcdir="`(cd ${srcdir}; pwd)`" ;; esac ### Remove trailing slashes. srcdir=`echo "${srcdir}" | sed 's,\([^/]\)/*$,\1,'` #### Check if the source directory already has a configured system in it. if [ `pwd` != `(cd ${srcdir} && pwd)` ] \ && [ -f "${srcdir}/src/config.h" ] ; then (echo "${progname}: WARNING: The directory tree \`${srcdir}' is being used" echo " as a build directory right now; it has been configured in its own" echo " right. To configure in another directory as well, you MUST" echo " use GNU make. If you do not have GNU make, then you must" echo " now do \`make distclean' in ${srcdir}," echo " and then run ${progname} again.") >&2 extrasub='/^VPATH[ ]*=/c\ vpath %.c $(srcdir)\ vpath %.h $(srcdir)\ vpath %.y $(srcdir)\ vpath %.l $(srcdir)\ vpath %.s $(srcdir)\ vpath %.in $(srcdir)' fi ### Make the necessary directories, if they don't exist. for dir in ./src ./lib-src ./cpp ./oldXMenu ./lwlib ./etc ; do if [ ! -d ${dir} ]; then mkdir ${dir} fi done #### Given the configuration name, set machfile and opsysfile to the #### names of the m/*.h and s/*.h files we should use. ### Canonicalize the configuration name. echo "Checking the configuration name" if canonical=`${srcdir}/config.sub "${configuration}"` ; then : ; else exit $? fi ### If you add support for a new configuration, add code to this ### switch statement to recognize your configuration name and select ### the appropriate operating system and machine description files. ### You would hope that you could choose an m/*.h file pretty much ### based on the machine portion of the configuration name, and an s- ### file based on the operating system portion. However, it turns out ### that each m/*.h file is pretty manufacturer-specific - for ### example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are ### all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS ### machines. So we basically have to have a special case for each ### configuration name. ### ### As far as handling version numbers on operating systems is ### concerned, make sure things will fail in a fixable way. If ### /etc/MACHINES doesn't say anything about version numbers, be ### prepared to handle anything reasonably. If version numbers ### matter, be sure /etc/MACHINES says something about it. ### ### Eric Raymond says we should accept strings like "sysvr4" to mean ### "System V Release 4"; he writes, "The old convention encouraged ### confusion between `system' and `release' levels'." machine='' opsys='' unported='false' case "${canonical}" in ## NetBSD ports *-*-netbsd* ) opsys=netbsd case "${canonical}" in i[345]86-*-netbsd*) machine=intel386 ;; m68k-*-netbsd*) # This is somewhat bogus. machine=hp9000s300 ;; mips-*-netbsd*) machine=pmax ;; ns32k-*-netbsd*) machine=ns32000 ;; sparc-*-netbsd*) machine=sparc ;; esac ;; ## Acorn RISCiX: arm-acorn-riscix1.1* ) machine=acorn opsys=riscix1-1 ;; arm-acorn-riscix1.2* | arm-acorn-riscix ) machine=acorn opsys=riscix1-2 ;; ## Alliant machines ## Strictly speaking, we need the version of the alliant operating ## system to choose the right machine file, but currently the ## configuration name doesn't tell us enough to choose the right ## one; we need to give alliants their own operating system name to ## do this right. When someone cares, they can help us. fx80-alliant-* ) machine=alliant4 opsys=bsd4-2 ;; i860-alliant-* ) machine=alliant-2800 opsys=bsd4-3 ;; alpha-dec-osf* ) machine=alpha opsys=osf1 ;; ## Altos 3068 m68*-altos-sysv* ) machine=altos opsys=usg5-2 ;; ## Amdahl UTS 580-amdahl-sysv* ) machine=amdahl opsys=usg5-2-2 ;; ## Appallings - I mean, Apollos - running Domain m68*-apollo* ) machine=apollo opsys=bsd4-2 ;; ## AT&T 3b2, 3b5, 3b15, 3b20 we32k-att-sysv* ) machine=att3b opsys=usg5-2-2 ;; ## AT&T 3b1 - The Mighty Unix PC! m68*-att-sysv* ) machine=7300 opsys=usg5-2-2 ;; ## Bull dpx20 rs6000-bull-bosx* ) machine=ibmrs6000 opsys=aix3-2 ;; ## Bull dpx2 m68*-bull-sysv3* ) machine=dpx2 opsys=usg5-3 ;; ## Bull sps7 m68*-bull-sysv2* ) machine=sps7 opsys=usg5-2 ;; ## CCI 5/32, 6/32 -- see "Tahoe". ## Celerity ## I don't know what configuration name to use for this; config.sub ## doesn't seem to know anything about it. Hey, Celerity users, get ## in touch with us! celerity-celerity-bsd* ) machine=celerity opsys=bsd4-2 ;; ## Clipper ## What operating systems does this chip run that Emacs has been ## tested on? clipper-* ) machine=clipper ## We'll use the catch-all code at the bottom to guess the ## operating system. ;; ## Convex *-convex-bsd* | *-convex-convexos* ) machine=convex opsys=bsd4-3 ## Prevents suprious white space in makefiles - d.m.cooke@larc.nasa.gov NON_GNU_CPP="cc -E -P" ;; ## Cubix QBx/386 i[345]86-cubix-sysv* ) machine=intel386 opsys=usg5-3 ;; ## Cydra 5 cydra*-cydrome-sysv* ) machine=cydra5 opsys=usg5-3 ;; ## Data General AViiON Machines m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* ) machine=aviion opsys=dgux5-4r3 ;; m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* ) machine=aviion opsys=dgux5-4r2 ;; m88k-dg-dgux* ) machine=aviion opsys=dgux ;; ## DECstations mips-dec-ultrix[0-3].* | mips-dec-ultrix4.0* | mips-dec-bsd4.2* ) machine=pmax opsys=bsd4-2 ;; mips-dec-ultrix* | mips-dec-bsd* ) machine=pmax opsys=bsd4-3 ;; mips-dec-osf* ) machine=pmax opsys=osf1 ;; ## Motorola Delta machines m68k-motorola-sysv* | m68000-motorola-sysv* ) machine=delta opsys=usg5-3 if [ -z "`type gnucc | grep 'not found'`" ] then CC=gnucc else if [ -z "`type gcc | grep 'not found'`" ] then CC=gcc else CC=cc fi fi ;; m88k-motorola-sysv4* ) machine=delta88k opsys=usg5-4 ;; m88k-motorola-sysv* | m88k-motorola-m88kbcs* ) machine=delta88k opsys=usg5-3 ;; ## Dual machines m68*-dual-sysv* ) machine=dual opsys=usg5-2 ;; m68*-dual-uniplus* ) machine=dual opsys=unipl5-2 ;; ## Elxsi 6400 elxsi-elxsi-sysv* ) machine=elxsi opsys=usg5-2 ;; ## Encore machines ns16k-encore-bsd* ) machine=ns16000 opsys=umax ;; ## The GEC 93 - apparently, this port isn't really finished yet. ## Gould Power Node and NP1 pn-gould-bsd4.2* ) machine=gould opsys=bsd4-2 ;; pn-gould-bsd4.3* ) machine=gould opsys=bsd4-3 ;; np1-gould-bsd* ) machine=gould-np1 opsys=bsd4-3 ;; ## Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000 ## as far as Emacs is concerned). m88k-harris-cxux* ) # Build needs to be different on 7.0 and later releases case "`uname -r`" in [56].[0-9] ) machine=nh4000 opsys=cxux ;; [7].[0-9] ) machine=nh4000 opsys=cxux7 ;; esac ;; ## Harris ecx or gcx running CX/UX (Series 1200, Series 3000) m68k-harris-cxux* ) machine=nh3000 opsys=cxux ;; ## Honeywell XPS100 xps*-honeywell-sysv* ) machine=xps100 opsys=usg5-2 ;; ## HP 9000 series 200 or 300 m68*-hp-bsd* ) machine=hp9000s300 opsys=bsd4-3 ;; ## HP/UX 7, 8 and 9 are supported on these machines. m68*-hp-hpux* ) case "`uname -r`" in ## Someone's system reports A.B8.05 for this. ## I wonder what other possibilities there are. *.B8.* ) machine=hp9000s300 opsys=hpux8 ;; *.08.* ) machine=hp9000s300 opsys=hpux8 ;; *.09.* ) machine=hp9000s300 opsys=hpux9 ;; *) machine=hp9000s300 opsys=hpux ;; esac ;; ## HP 9000 series 700 and 800, running HP/UX hppa*-hp-hpux7* ) machine=hp800 opsys=hpux ;; hppa*-hp-hpux8* ) machine=hp800 opsys=hpux8 ;; hppa*-hp-hpux9shr* ) machine=hp800 opsys=hpux9shr ;; hppa*-hp-hpux9* ) machine=hp800 opsys=hpux9 ;; ## HP 9000 series 700 and 800, running HP/UX hppa*-hp-hpux* ) ## Cross-compilation? Nah! case "`uname -r`" in ## Someone's system reports A.B8.05 for this. ## I wonder what other possibilities there are. *.B8.* ) machine=hp800 opsys=hpux8 ;; *.08.* ) machine=hp800 opsys=hpux8 ;; *.09.* ) machine=hp800 opsys=hpux9 ;; *) machine=hp800 opsys=hpux ;; esac ;; ## Orion machines orion-orion-bsd* ) machine=orion opsys=bsd4-2 ;; clipper-orion-bsd* ) machine=orion105 opsys=bsd4-2 ;; ## IBM machines i[345]86-ibm-aix1.1* ) machine=ibmps2-aix opsys=usg5-2-2 ;; i[345]86-ibm-aix1.[23]* | i[345]86-ibm-aix* ) machine=ibmps2-aix opsys=usg5-3 ;; i370-ibm-aix*) machine=ibm370aix opsys=usg5-3 ;; rs6000-ibm-aix3.1* | powerpc-ibm-aix3.1* ) machine=ibmrs6000 opsys=aix3-1 ;; rs6000-ibm-aix3.2.5 | powerpc-ibm-aix3.2.5 ) machine=ibmrs6000 opsys=aix3-2-5 ;; rs6000-ibm-aix* | powerpc-ibm-aix* ) machine=ibmrs6000 opsys=aix3-2 ;; romp-ibm-bsd4.3* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-bsd4.2* ) machine=ibmrt opsys=bsd4-2 ;; romp-ibm-aos4.3* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-aos4.2* ) machine=ibmrt opsys=bsd4-2 ;; romp-ibm-aos* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-bsd* ) machine=ibmrt opsys=bsd4-3 ;; romp-ibm-aix* ) machine=ibmrt-aix opsys=usg5-2-2 ;; ## Integrated Solutions `Optimum V' m68*-isi-bsd4.2* ) machine=isi-ov opsys=bsd4-2 ;; m68*-isi-bsd4.3* ) machine=isi-ov opsys=bsd4-3 ;; ## Intel 386 machines where we do care about the manufacturer i[345]86-intsys-sysv* ) machine=is386 opsys=usg5-2-2 ;; ## Prime EXL i[345]86-prime-sysv* ) machine=i386 opsys=usg5-3 ;; ## Sequent Symmetry running Dynix i[345]86-sequent-bsd* ) machine=symmetry opsys=bsd4-3 ;; ## Sequent Symmetry running DYNIX/ptx ## Use the old cpp rather than the newer ANSI one. i[345]86-sequent-ptx* ) machine=sequent-ptx opsys=ptx NON_GNU_CPP="/lib/cpp" ;; ## Unspecified sysv on an ncr machine defaults to svr4.2. ## (Plain usg5-4 doesn't turn on POSIX signals, which we need.) i[345]86-ncr-sysv* ) machine=intel386 opsys=usg5-4-2 ;; ## Intel 860 i860-*-sysv4* ) machine=i860 opsys=usg5-4 NON_GNU_CC="/bin/cc" # Ie, not the one in /usr/ucb/cc. NON_GNU_CPP="/usr/ccs/lib/cpp" # cc -E tokenizes macro expansion. ;; ## Masscomp machines m68*-masscomp-rtu* ) machine=masscomp opsys=rtu ;; ## Megatest machines m68*-megatest-bsd* ) machine=mega68 opsys=bsd4-2 ;; ## Workstations sold by MIPS ## This is not necessarily all workstations using the MIPS processor - ## Irises are produced by SGI, and DECstations by DEC. ## etc/MACHINES lists mips.h and mips4.h as possible machine files, ## and usg5-2-2 and bsd4-3 as possible OS files. The only guidance ## it gives for choosing between the alternatives seems to be "Use ## -machine=mips4 for RISCOS version 4; use -opsystem=bsd4-3 with ## the BSD world." I'll assume that these are instructions for ## handling two odd situations, and that every other situation ## should use mips.h and usg5-2-2, they being listed first. mips-mips-usg* ) machine=mips4 ## Fall through to the general code at the bottom to decide on the OS. ;; mips-mips-riscos4* ) machine=mips4 opsys=bsd4-3 NON_GNU_CC="cc -systype bsd43" NON_GNU_CPP="cc -systype bsd43 -E" ;; mips-mips-bsd* ) machine=mips opsys=bsd4-3 ;; mips-mips-* ) machine=mips opsys=usg5-2-2 ;; ## NeXT m68*-next-* | i[345]86-next-* ) machine=next opsys=mach2 ;; ## The complete machine from National Semiconductor ns32k-ns-genix* ) machine=ns32000 opsys=usg5-2 ;; ## NCR machines m68*-ncr-sysv2* | m68*-ncr-sysvr2* ) machine=tower32 opsys=usg5-2-2 ;; m68*-ncr-sysv3* | m68*-ncr-sysvr3* ) machine=tower32v3 opsys=usg5-3 ;; ## Nixdorf Targon 31 m68*-nixdorf-sysv* ) machine=targon31 opsys=usg5-2-2 ;; ## Nu (TI or LMI) m68*-nu-sysv* ) machine=nu opsys=usg5-2 ;; ## Plexus m68*-plexus-sysv* ) machine=plexus opsys=usg5-2 ;; ## Pyramid machines ## I don't really have any idea what sort of processor the Pyramid has, ## so I'm assuming it is its own architecture. pyramid-pyramid-bsd* ) machine=pyramid opsys=bsd4-2 ;; ## Sequent Balance ns32k-sequent-bsd4.2* ) machine=sequent opsys=bsd4-2 ;; ns32k-sequent-bsd4.3* ) machine=sequent opsys=bsd4-3 ;; ## Siemens Nixdorf mips-siemens-sysv* ) machine=mips-siemens opsys=usg5-4 NON_GNU_CC=/usr/ccs/bin/cc NON_GNU_CPP=/usr/ccs/lib/cpp ;; ## Silicon Graphics machines ## Iris 2500 and Iris 2500 Turbo (aka the Iris 3030) m68*-sgi-iris3.5* ) machine=irist opsys=iris3-5 ;; m68*-sgi-iris3.6* | m68*-sgi-iris*) machine=irist opsys=iris3-6 ;; ## Iris 4D mips-sgi-irix3* ) machine=iris4d opsys=irix3-3 ;; mips-sgi-irix5* ) machine=iris4d opsys=irix5-0 ;; mips-sgi-irix4* | mips-sgi-irix* ) machine=iris4d opsys=irix4-0 ;; ## SONY machines m68*-sony-bsd4.2* ) machine=news opsys=bsd4-2 ;; m68*-sony-bsd4.3* ) machine=news opsys=bsd4-3 ;; m68*-sony-newsos3*) machine=news opsys=bsd4-3 ;; mips-sony-bsd* | mips-sony-newsos4* ) machine=news-risc opsys=bsd4-3 ;; mips-sony-newsos* ) machine=news-risc opsys=newsos5 ;; ## Stride m68*-stride-sysv* ) machine=stride opsys=usg5-2 ;; ## Suns *-sun-sunos* | *-sun-bsd* | *-sun-solaris* | i[345]86-*-solaris2* | i[345]86-*-sunos5* ) case "${canonical}" in m68*-sunos1* ) machine=sun1 ;; m68*-sunos2* ) machine=sun2 ;; m68* ) machine=sun3 ;; i[345]86-sun-sunos[34]* ) machine=sun386 ;; i[345]86-*-* ) machine=intel386 ;; sparc* ) machine=sparc ;; * ) unported=true ;; esac case "${canonical}" in ## The Sun386 didn't get past 4.0. i[345]86-*-sunos4 ) opsys=sunos4-0 ;; *-sunos4.0* ) opsys=sunos4-0 ;; *-sunos4.1.3* ) opsys=sunos4-1-3 NON_GCC_TEST_OPTIONS=-Bstatic GCC_TEST_OPTIONS=-static ;; *-sunos4shr* ) opsys=sunos4shr ;; *-sunos4* | *-sunos ) opsys=sunos4-1 NON_GCC_TEST_OPTIONS=-Bstatic GCC_TEST_OPTIONS=-static ;; *-sunos5.3* | *-solaris2.3* ) opsys=sol2-3 NON_GNU_CPP=/usr/ccs/lib/cpp ;; *-sunos5.4* | *-solaris2.4* ) opsys=sol2-4 NON_GNU_CPP=/usr/ccs/lib/cpp ;; *-sunos5* | *-solaris* ) opsys=sol2 NON_GNU_CPP=/usr/ccs/lib/cpp ;; * ) opsys=bsd4-2 ;; esac ;; ## Tadpole 68k m68*-tadpole-sysv* ) machine=tad68k opsys=usg5-3 ;; ## Tahoe machines tahoe-tahoe-bsd4.2* ) machine=tahoe opsys=bsd4-2 ;; tahoe-tahoe-bsd4.3* ) machine=tahoe opsys=bsd4-3 ;; ## Tandem Integrity S2 mips-tandem-sysv* ) machine=tandem-s2 opsys=usg5-3 ;; ## Tektronix XD88 m88k-tektronix-sysv3* ) machine=tekxd88 opsys=usg5-3 ;; ## Tektronix 16000 box (6130?) ns16k-tektronix-bsd* ) machine=ns16000 opsys=bsd4-2 ;; ## Tektronix 4300 ## src/m/tek4300.h hints that this is a m68k machine. m68*-tektronix-bsd* ) machine=tek4300 opsys=bsd4-3 ;; ## Titan P2 or P3 ## We seem to have lost the machine-description file titan.h! titan-titan-sysv* ) machine=titan opsys=usg5-3 ;; ## Ustation E30 (SS5E) m68*-unisys-uniplus* ) machine=ustation opsystem=unipl5-2 ;; ## Vaxen. vax-dec-* ) machine=vax case "${canonical}" in *-bsd4.1* ) opsys=bsd4-1 ;; *-bsd4.2* | *-ultrix[0-3].* | *-ultrix4.0* ) opsys=bsd4-2 ;; *-bsd4.3* | *-ultrix* ) opsys=bsd4-3 ;; *-bsd386* | *-bsdi* ) opsys=bsd386 ;; *-sysv[01]* | *-sysvr[01]* ) opsys=usg5-0 ;; *-sysv2* | *-sysvr2* ) opsys=usg5-2 ;; *-vms* ) opsys=vms ;; * ) unported=true esac ;; ## Whitechapel MG1 ns16k-whitechapel-* ) machine=mg1 ## We don't know what sort of OS runs on these; we'll let the ## operating system guessing code below try. ;; ## Wicat m68*-wicat-sysv* ) machine=wicat opsys=usg5-2 ;; ## Intel 386 machines where we don't care about the manufacturer i[345]86-*-* ) machine=intel386 case "${canonical}" in *-isc1.* | *-isc2.[01]* ) opsys=386-ix ;; *-isc2.2* ) opsys=isc2-2 ;; *-isc4.0* ) opsys=isc4-0 ;; *-isc* ) opsys=isc3-0 ;; *-esix5* ) opsys=esix5r4; NON_GNU_CPP=/usr/lib/cpp ;; *-esix* ) opsys=esix ;; *-xenix* ) opsys=xenix ;; *-linux* ) opsys=linux ;; *-sco3.2v4* ) opsys=sco4 ; NON_GNU_CPP=/lib/cpp ;; *-bsd386* | *-bsdi* ) opsys=bsd386 ;; *-386bsd* ) opsys=386bsd ;; *-freebsd* ) opsys=freebsd ;; *-nextstep* ) opsys=mach2 ;; ## Otherwise, we'll fall through to the generic opsys code at the bottom. esac ;; * ) unported=true ;; esac ### If the code above didn't choose an operating system, just choose ### an operating system based on the configuration name. You really ### only want to use this when you have no idea what the right ### operating system is; if you know what operating systems a machine ### runs, it's cleaner to make it explicit in the case statement ### above. if [ x"${opsys}" = x ]; then case "${canonical}" in *-gnu* ) opsys=gnu ;; *-bsd4.[01] ) opsys=bsd4-1 ;; *-bsd4.2 ) opsys=bsd4-2 ;; *-bsd4.3 ) opsys=bsd4-3 ;; *-sysv0 | *-sysvr0 ) opsys=usg5-0 ;; *-sysv2 | *-sysvr2 ) opsys=usg5-2 ;; *-sysv2.2 | *-sysvr2.2 ) opsys=usg5-2-2 ;; *-sysv3 | *-sysvr3 ) opsys=usg5-3 ;; *-sysv4 | *-sysvr4 ) opsys=usg5-4 ;; *-sysv4.1 | *-sysvr4.1 ) NON_GNU_CPP=/usr/lib/cpp opsys=usg5-4 ;; *-sysv4.2 | *-sysvr4.2 ) opsys=usg5-4-2 ;; * ) unported=true ;; esac fi if $unported ; then (echo "${progname}: Emacs hasn't been ported to \`${canonical}' systems." echo "${progname}: Check \`etc/MACHINES' for recognized configuration names." ) >&2 exit 1 fi machfile="m/${machine}.h" opsysfile="s/${opsys}.h" ] AC_PREPARE(lisp) AC_CONFIG_HEADER(src/config.h) [ #### Choose a compiler. if [ "x$CC" = x ] then true else cc_specified=1 fi case ${with_gcc} in "yes" ) CC="gcc" GCC=1 ;; "no" ) if [ "x$CC" = x ] then CC=cc; else true; fi ;; * ) ] AC_PROG_CC [ esac #### Some systems specify a CPP to use unless we are using GCC. #### Now that we know whether we are using GCC, we can decide whether #### to use that one. if [ "x$NON_GNU_CPP" = x ] || [ x$GCC = x1 ] || [ "x$CPP" != x ] then true else CPP="$NON_GNU_CPP" fi #### Some systems specify a CC to use unless we are using GCC. #### Now that we know whether we are using GCC, we can decide whether #### to use that one. if [ "x$NON_GNU_CC" = x ] || [ x$GCC = x1 ] || [ x$cc_specified = x1 ] then true else CC="$NON_GNU_CC" fi if [ x$GCC = x1 ] && [ "x$GCC_TEST_OPTIONS" != x ] then CC="$CC $GCC_TEST_OPTIONS" fi if [ x$GCC = x ] && [ "x$NON_GCC_TEST_OPTIONS" != x ] then CC="$CC $NON_GCC_TEST_OPTIONS" fi #### Some other nice autoconf tests. If you add a test here which #### should make an entry in src/config.h, don't forget to add an #### #undef clause to src/config.h.in for autoconf to modify. ] dnl checks for programs AC_LN_S AC_PROG_CPP AC_PROG_INSTALL AC_PROG_YACC dnl checks for UNIX variants that set `DEFS' AC_AIX dnl checks for header files AC_HAVE_HEADERS(sys/timeb.h sys/time.h unistd.h utime.h) AC_STDC_HEADERS AC_TIME_WITH_SYS_TIME dnl In Autoconf 1.8 use AC_SYS_SIGLIST_DECLARED instead of this. AC_COMPILE_CHECK(sys_siglist declaration in signal.h or unistd.h, [#include <signal.h> /* NetBSD declares sys_siglist in <unistd.h>. */ #ifdef HAVE_UNISTD_H #include <unistd.h> #endif], [char *msg = *(sys_siglist + 1);], AC_DEFINE(SYS_SIGLIST_DECLARED)) dnl Some systems have utime.h but don't declare the struct anyplace. AC_COMPILE_CHECK(struct utimbuf, [#ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif #ifdef HAVE_UTIME_H #include <utime.h> #endif], [static struct utimbuf x; x.actime = x.modtime;], AC_DEFINE(HAVE_STRUCT_UTIMBUF)) dnl checks for typedefs AC_RETSIGTYPE AC_COMPILE_CHECK(struct timeval, [#ifdef TIME_WITH_SYS_TIME #include <sys/time.h> #include <time.h> #else #ifdef HAVE_SYS_TIME_H #include <sys/time.h> #else #include <time.h> #endif #endif], [static struct timeval x; x.tv_sec = x.tv_usec;], AC_DEFINE(HAVE_TIMEVAL)) dnl checks for structure members AC_STRUCT_TM AC_TIMEZONE dnl checks for compiler characteristics AC_CONST dnl check for Make feature AC_SET_MAKE dnl checks for operating system services AC_LONG_FILE_NAMES dnl other checks for UNIX variants [ #### Choose a window system. echo "checking for specified window system" window_system='' case "${with_x}" in yes ) window_system=${window_system}x11 ;; no ) window_system=${window_system}none ;; esac case "${window_system}" in .* ) ;; * ) case "${with_x11}" in yes ) window_system=x11 ;; no ) window_system=none ;; esac case "${with_x10}" in yes ) window_system=x10 ;; no ) window_system=none ;; esac ;; esac case "${window_system}" in "none" | "x11" | "x10" ) ;; "" ) # --x-includes or --x-libraries implies --with-x11. if [ -n "${x_includes}" ] || [ -n "${x_libraries}" ]; then window_system=x11 else echo " No window system specified. Looking for X11." # If the user didn't specify a window system and we found X11, use it. if [ -r /usr/lib/libX11.a \ -o -d /usr/include/X11 \ -o -d /usr/X386/include \ -o -d ${x_includes}/X11 ]; then window_system=x11 fi fi ;; * ) echo "Don't specify a window system more than once." >&2 exit 1 ;; esac case "${window_system}" in "" | "x11" ) ### If the user hasn't specified where we should find X, try ### letting autoconf figure that out. if [ -z "${x_includes}" ] && [ -z "${x_libraries}" ]; then ] AC_FIND_X [ fi if [ -n "${x_includes}" ] || [ -n "${x_libraries}" ]; then window_system=x11 fi ;; esac [ -z "${window_system}" ] && window_system=none [ -n "${x_libraries}" ] && LD_SWITCH_X_SITE="-L${x_libraries}" [ -n "${x_libraries}" ] && LD_SWITCH_X_SITE_AUX="-R${x_libraries}" [ -n "${x_includes}" ] && C_SWITCH_X_SITE="-I${x_includes}" if [ x"${x_includes}" = x ]; then bitmapdir=/usr/include/X11/bitmaps; else bitmapdir="${x_includes}/bitmaps"; fi # Avoid forcing the search of /usr/include before fixed include files. if [ "$C_SWITCH_X_SITE" = "-I/usr/include" ]; then C_SWITCH_X_SITE=" " fi case "${window_system}" in x11 ) HAVE_X_WINDOWS=yes HAVE_X11=yes echo " Using X11." case "${with_x_toolkit}" in athena | lucid ) USE_X_TOOLKIT=LUCID echo " Using Xt toolkit." ;; motif ) USE_X_TOOLKIT=MOTIF echo " Using Motif toolkit." ;; open-look ) USE_X_TOOLKIT=OPEN_LOOK echo " Using Open-Look toolkit." ;; * ) USE_X_TOOLKIT=none echo " Using Xlib directly." ;; esac ;; x10 ) HAVE_X_WINDOWS=yes HAVE_X11=no USE_X_TOOLKIT=none echo " Using X10." ;; none ) HAVE_X_WINDOWS=no HAVE_X11=no USE_X_TOOLKIT=none echo " Using no window system." ;; esac X_TOOLKIT_TYPE=$USE_X_TOOLKIT ### If we're using X11, we should use the X menu package. HAVE_X_MENU=no case ${HAVE_X11} in yes ) HAVE_X_MENU=yes ;; esac #### Extract some information from the operating system and machine files. echo "examining the machine- and system-dependent files to find out" echo " - which libraries the lib-src programs will want, and" echo " - whether the GNU malloc routines are usable" ### First figure out CFLAGS (which we use for running the compiler here) ### and REAL_CFLAGS (which we use for real compilation). ### The two are the same except on a few systems, where they are made ### different to work around various lossages. For example, ### GCC 2.5 on Linux needs them to be different because it treats -g ### as implying static linking. ### If the CFLAGS env var is specified, we use that value ### instead of the default. ### It's not important that this name contain the PID; you can't run ### two configures in the same directory and have anything work ### anyway. tempcname="conftest.c" echo ' #include "'${srcdir}'/src/'${opsysfile}'" #include "'${srcdir}'/src/'${machfile}'" #ifndef LIBS_MACHINE #define LIBS_MACHINE #endif #ifndef LIBS_SYSTEM #define LIBS_SYSTEM #endif #ifndef C_SWITCH_SYSTEM #define C_SWITCH_SYSTEM #endif #ifndef C_SWITCH_MACHINE #define C_SWITCH_MACHINE #endif configure___ libsrc_libs=LIBS_MACHINE LIBS_SYSTEM configure___ c_switch_system=C_SWITCH_SYSTEM configure___ c_switch_machine=C_SWITCH_MACHINE #ifndef LIB_X11_LIB #define LIB_X11_LIB -lX11 #endif #ifndef LIBX11_MACHINE #define LIBX11_MACHINE #endif #ifndef LIBX11_SYSTEM #define LIBX11_SYSTEM #endif configure___ LIBX=LIB_X11_LIB LIBX11_MACHINE LIBX11_SYSTEM #ifdef UNEXEC configure___ unexec=UNEXEC #else configure___ unexec=unexec.o #endif #ifdef SYSTEM_MALLOC configure___ system_malloc=yes #else configure___ system_malloc=no #endif #ifndef C_DEBUG_SWITCH #define C_DEBUG_SWITCH -g #endif #ifndef C_OPTIMIZE_SWITCH #define C_OPTIMIZE_SWITCH -O #endif #ifdef THIS_IS_CONFIGURE /* Get the CFLAGS for tests in configure. */ #ifdef __GNUC__ configure___ CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}' #else configure___ CFLAGS=C_DEBUG_SWITCH '${CFLAGS}' #endif #else /* not THIS_IS_CONFIGURE */ /* Get the CFLAGS for real compilation. */ #ifdef __GNUC__ configure___ REAL_CFLAGS=C_DEBUG_SWITCH C_OPTIMIZE_SWITCH '${CFLAGS}' #else configure___ REAL_CFLAGS=C_DEBUG_SWITCH '${CFLAGS}' #endif #endif /* not THIS_IS_CONFIGURE */ ' > ${tempcname} # The value of CPP is a quoted variable reference, so we need to do this # to get its actual value... CPP=`eval "echo $CPP"` eval `${CPP} -Isrc ${tempcname} \ | grep 'configure___' \ | sed -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/'` if [ "x$CFLAGS" = x ]; then eval `${CPP} -Isrc -DTHIS_IS_CONFIGURE ${tempcname} \ | grep 'configure___' \ | sed -e 's/^configure___ \([^=]*=\)\(.*\)$/\1"\2"/'` else REAL_CFLAGS="$CFLAGS" fi rm ${tempcname} ### Compute the unexec source name from the object name. UNEXEC_SRC="`echo ${unexec} | sed 's/\.o/.c/'`" # Do the opsystem or machine files prohibit the use of the GNU malloc? # Assume not, until told otherwise. GNU_MALLOC=yes if [ "${system_malloc}" = "yes" ]; then GNU_MALLOC=no GNU_MALLOC_reason=" (The GNU allocators don't work with this system configuration.)" fi if [ x"${REL_ALLOC}" = x ]; then REL_ALLOC=${GNU_MALLOC} fi LISP_FLOAT_TYPE=yes #### Add the libraries to LIBS and check for some functions. ] DEFS="$c_switch_system $c_switch_machine $DEFS" LIBS="$libsrc_libs" dnl If found, this defines HAVE_LIBDNET, which m/pmax.h checks, dnl and also adds -ldnet to LIBS, which Autoconf uses for checks. AC_HAVE_LIBRARY(-ldnet) dnl This causes -lresolv to get used in subsequent tests, dnl which causes failures on some systems such as HPUX 9. dnl AC_HAVE_LIBRARY(-lresolv) AC_HAVE_LIBRARY(-lXbsd, LD_SWITCH_X_SITE="$LD_SWITCH_X_SITE -lXbsd") echo checking for XFree86 if test -d /usr/X386/include; then HAVE_XFREE386=yes test -z "${C_SWITCH_X_SITE}" && C_SWITCH_X_SITE="-I/usr/X386/include" fi # We change CFLAGS temporarily so that C_SWITCH_X_SITE gets used # for the tests that follow. if test "${HAVE_X11}" = "yes"; then DEFS="$C_SWITCH_X_SITE $DEFS" LIBS="$LD_SWITCH_X_SITE $LIBX $LIBS" CFLAGS="$C_SWITCH_X_SITE $CFLAGS" AC_HAVE_FUNCS(XrmSetDatabase XScreenResourceString \ XScreenNumberOfScreen XSetWMProtocols) fi if test "${USE_X_TOOLKIT}" != "none"; then AC_COMPILE_CHECK(X11 toolkit version, [#include <X11/Intrinsic.h>], [ #if XtSpecificationRelease < 6 fail; #endif ], AC_DEFINE(HAVE_X11XTR6)) fi # If netdb.h doesn't declare h_errno, we must declare it by hand. AC_COMPILE_CHECK(declaration of h_errno in netdb.h, [#include <netdb.h>], [ int foo () { return h_errno; } ], AC_DEFINE(HAVE_H_ERRNO)) AC_ALLOCA # logb and frexp are found in -lm on most systems. AC_HAVE_LIBRARY(-lm) AC_HAVE_FUNCS(gettimeofday gethostname dup2 rename closedir mkdir rmdir \ random lrand48 bcopy bcmp logb frexp fmod drem ftime res_init setsid \ strerror fpathconf select mktime eaccess getpagesize) ok_so_far=true AC_FUNC_CHECK(socket, , ok_so_far=) if test -n "$ok_so_far"; then AC_HEADER_CHECK(netinet/in.h, , ok_so_far=) fi if test -n "$ok_so_far"; then AC_HEADER_CHECK(arpa/inet.h, , ok_so_far=) fi if test -n "$ok_so_far"; then AC_DEFINE(HAVE_INET_SOCKETS) fi # Set up the CFLAGS for real compilation, so we can substitute it. CFLAGS="$REAL_CFLAGS" [ #### Find out which version of Emacs this is. version=`grep 'defconst[ ]*emacs-version' ${srcdir}/lisp/version.el \ | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'` if [ x"${version}" = x ]; then echo "${progname}: can't find current emacs version in \`${srcdir}/lisp/version.el'." >&2 exit 1 fi if [ -f /usr/lpp/X11/bin/smt.exp ]; then ] AC_DEFINE(HAVE_AIX_SMT_EXP) [ fi #### Specify what sort of things we'll be editing into Makefile and config.h. ### Use configuration here uncanonicalized to avoid exceeding size limits. ] AC_SUBST(version) AC_SUBST(configuration) AC_SUBST(canonical) AC_SUBST(srcdir) AC_SUBST(prefix) AC_SUBST(exec_prefix) AC_SUBST(bindir) AC_SUBST(datadir) AC_SUBST(sharedstatedir) AC_SUBST(libexecdir) AC_SUBST(mandir) AC_SUBST(infodir) AC_SUBST(lispdir) AC_SUBST(locallisppath) AC_SUBST(lisppath) AC_SUBST(etcdir) AC_SUBST(lockdir) AC_SUBST(archlibdir) AC_SUBST(docdir) AC_SUBST(bitmapdir) AC_SUBST(c_switch_system) AC_SUBST(c_switch_machine) AC_SUBST(LD_SWITCH_X_SITE) AC_SUBST(LD_SWITCH_X_SITE_AUX) AC_SUBST(C_SWITCH_X_SITE) AC_SUBST(CFLAGS) AC_SUBST(X_TOOLKIT_TYPE) AC_SUBST(machfile) AC_SUBST(opsysfile) AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION, "\"${canonical}\"") AC_DEFINE_UNQUOTED(EMACS_CONFIG_OPTIONS, "\"${config_options}\"") AC_DEFINE_UNQUOTED(config_machfile, "\"${machfile}\"") AC_DEFINE_UNQUOTED(config_opsysfile, "\"${opsysfile}\"") AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, ${LD_SWITCH_X_SITE}) AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, ${LD_SWITCH_X_SITE_AUX}) AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE, ${C_SWITCH_X_SITE}) AC_DEFINE_UNQUOTED(UNEXEC_SRC, ${UNEXEC_SRC}) [ if [ "${HAVE_X_WINDOWS}" = "yes" ] ; then ] AC_DEFINE(HAVE_X_WINDOWS) [ fi if [ "${USE_X_TOOLKIT}" != "none" ] ; then ] AC_DEFINE(USE_X_TOOLKIT) [ fi if [ "${HAVE_X11}" = "yes" ] ; then ] AC_DEFINE(HAVE_X11) [ fi if [ "${HAVE_XFREE386}" = "yes" ] ; then ] AC_DEFINE(HAVE_XFREE386) [ fi if [ "${HAVE_X_MENU}" = "yes" ] ; then ] AC_DEFINE(HAVE_X_MENU) [ fi if [ "${GNU_MALLOC}" = "yes" ] ; then ] AC_DEFINE(GNU_MALLOC) [ fi if [ "${REL_ALLOC}" = "yes" ] ; then ] AC_DEFINE(REL_ALLOC) [ fi if [ "${LISP_FLOAT_TYPE}" = "yes" ] ; then ] AC_DEFINE(LISP_FLOAT_TYPE) [ fi # ====================== Developer's configuration ======================= # The following assignments make sense if you're running Emacs on a single # machine, one version at a time, and you want changes to the lisp and etc # directories in the source tree to show up immediately in your working # environment. It saves a great deal of disk space by not duplicating the # lisp and etc directories. if [ "$run_in_place" = "1" ]; then lispdir='${srcdir}/lisp' locallisppath='${srcdir}/site-lisp' etcdir='${srcdir}/etc' lockdir='${srcdir}/lock' # We used to make archlibdir and docdir absolute, # but that caused trouble with automounters. archlibdir='${srcdir}/lib-src' docdir='${srcdir}/etc' infodir='${srcdir}/info' elif [ "$single_tree" = "1" ]; then if [ "$exec_prefix_specified" = "" ]; then exec_prefix='${prefix}' fi if [ "$bindir_specified" = "" ]; then bindir='${exec_prefix}/bin/${configuration}' fi if [ "$datadir_specified" = "" ]; then datadir='${prefix}/common' fi if [ "$sharedstatedir_specified" = "" ]; then sharedstatedir='${prefix}/common' fi if [ "$libexecdir_specified" = "" ]; then libexecdir='${bindir}' fi if [ "$lispdir_specified" = "" ]; then lispdir='${prefix}/common/lisp' fi if [ "$locallisppath_specified" = "" ]; then locallisppath='${prefix}/common/site-lisp' fi if [ "$lockdir_specified" = "" ]; then lockdir='${prefix}/common/lock' fi if [ "$archlibdir_specified" = "" ]; then archlibdir='${libexecdir}/etc' fi if [ "$etcdir_specified" = "" ]; then etcdir='${prefix}/common/data' fi if [ "$docdir_specified" = "" ]; then docdir='${prefix}/common/data' fi fi #### Report on what we decided to do. echo " Configured for \`${canonical}'. Where should the build process find the source code? ${srcdir} What operating system and machine description files should Emacs use? \`${opsysfile}' and \`${machfile}' What compiler should emacs be built with? ${CC} ${CFLAGS} Should Emacs use the GNU version of malloc? ${GNU_MALLOC}${GNU_MALLOC_reason} Should Emacs use the relocating allocator for buffers? ${REL_ALLOC} What window system should Emacs use? ${window_system} What toolkit should Emacs use? ${USE_X_TOOLKIT}${x_includes+ Where do we find X Windows header files? }${x_includes}${x_libraries+ Where do we find X Windows libraries? }${x_libraries} " # Remove any trailing slashes in these variables. test -n "${prefix}" && prefix=`echo "${prefix}" | sed 's,\([^/]\)/*$,\1,'` test -n "${exec_prefix}" && exec_prefix=`echo "${exec_prefix}" | sed 's,\([^/]\)/*$,\1,'` ] AC_OUTPUT(Makefile lib-src/Makefile.in oldXMenu/Makefile lwlib/Makefile src/Makefile.in, [ # Build src/Makefile from ${srcdir}/src/Makefile.in. This must be done # after src/config.h is built, since we rely on that file. changequote(,)dnl The horror, the horror. # Now get this: Some word that is part of the ${srcdir} directory name # or the ${configuration} value might, just might, happen to be an # identifier like `sun4' or `i386' or something, and be predefined by # the C preprocessor to some helpful value like 1, or maybe the empty # string. Needless to say consequent macro substitutions are less # than conducive to the makefile finding the correct directory. undefs="`echo $top_srcdir $configuration $canonical | sed -e 's/[^a-zA-Z0-9_]/ /g' -e 's/^/ /' -e 's/ *$//' \ -e 's/ */ -U/g' -e 's/-U[0-9][^ ]*//g' \ `" changequote([,])dnl echo creating lib-src/Makefile ( cd lib-src rm -f junk.c junk1.c junk2.c sed -e '/start of cpp stuff/q' \ < Makefile.in > junk1.c sed -e '1,/start of cpp stuff/d'\ -e 's@/\*\*/#\(.*\)$@/* \1 */@' \ < Makefile.in > junk.c $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \ sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c cat junk1.c junk2.c > Makefile.new rm -f junk.c junk1.c junk2.c chmod 444 Makefile.new mv -f Makefile.new Makefile ) echo creating src/Makefile ( cd src rm -f junk.c junk1.c junk2.c sed -e '/start of cpp stuff/q' \ < Makefile.in > junk1.c sed -e '1,/start of cpp stuff/d'\ -e 's@/\*\*/#\(.*\)$@/* \1 */@' \ < Makefile.in > junk.c $CPP $undefs -I. -I$top_srcdir/src $CPPFLAGS junk.c | \ sed -e 's/^ / /' -e '/^#/d' -e '/^[ ]*$/d' > junk2.c cat junk1.c junk2.c > Makefile.new rm -f junk.c junk1.c junk2.c chmod 444 Makefile.new mv -f Makefile.new Makefile )])