view install-sh @ 79799:57956dd69d3f

(top-level): Fix spacing. (verilog-mode-version, verilog-mode-release-date): Update version number. (verilog-mode-release-emacs): New variable. (compile-command, reporter-prompt-for-summary-p): Define for byte compiler. (verilog-startup-message-lines) (verilog-startup-message-displayed) (verilog-display-startup-message): Remove. (verilog-highlight-p1800-keywords): Improve docstring. (sigs-in, sigs-out, got-sig, got-rvalue, uses-delayed) (vector-skip-list): Only defvar at compile time. (verilog-highlight-translate-off, verilog-indent-level) (verilog-indent-level-module, verilog-indent-level-declaration) (verilog-indent-declaration-macros, verilog-indent-lists) (verilog-indent-level-behavioral) (verilog-indent-level-directive, verilog-cexp-indent) (verilog-case-indent, verilog-auto-newline) (verilog-auto-indent-on-newline, verilog-tab-always-indent) (verilog-tab-to-comment, verilog-indent-begin-after-if) (verilog-align-ifelse, verilog-minimum-comment-distance) (verilog-auto-lineup, verilog-highlight-p1800-keywords) (verilog-auto-endcomments, verilog-auto-read-includes) (verilog-auto-star-expand, verilog-auto-star-save) (verilog-library-flags, verilog-library-directories) (verilog-library-files, verilog-library-extensions) (verilog-active-low-regexp, verilog-auto-sense-include-inputs) (verilog-auto-sense-defines-constant, verilog-auto-reset-widths) (verilog-assignment-delay, verilog-auto-inst-vector) (verilog-auto-inst-template-numbers) (verilog-auto-input-ignore-regexp) (verilog-auto-inout-ignore-regexp) (verilog-auto-output-ignore-regexp) (verilog-auto-unused-ignore-regexp, verilog-typedef-regexp): Add safe-local-variable properties. (verilog-statement-menu, verilog-company) (verilog-re-search-forward, verilog-re-search-backward) (verilog-error-regexp-add, verilog-end-block-re) (verilog-emacs-features, verilog-populate-syntax-table) (verilog-setup-dual-comments, verilog-type-font-keywords) (verilog-inside-comment-p, electric-verilog-backward-sexp) (verilog-backward-sexp, verilog-forward-sexp) (verilog-font-lock-init, verilog-mode) (electric-verilog-terminate-line, electric-verilog-semi) (electric-verilog-tab, verilog-insert-1, ) (verilog-insert-indices, verilog-generate-numbers) (verilog-comment-region, verilog-label-be) (verilog-beg-of-statement, verilog-in-case-region-p) (verilog-in-struct-region-p, verilog-in-generate-region-p) (verilog-in-fork-region-p, verilog-backward-case-item) (verilog-set-auto-endcomments, verilog-get-expr) (verilog-expand-vector-internal, verilog-surelint-off) (verilog-batch-execute-func, verilog-calculate-indent) (verilog-calc-1, verilog-calculate-indent-directive) (verilog-leap-to-head, verilog-continued-line) (verilog-backward-token, verilog-backward-syntactic-ws) (verilog-forward-syntactic-ws, verilog-backward-ws&directives) (verilog-forward-ws&directives, verilog-at-constraint-p) (verilog-skip-backward-comments, verilog-indent-line-relative) (verilog-do-indent, verilog-indent-comment) (verilog-more-comment, verilog-pretty-declarations) (verilog-pretty-expr, verilog-just-one-space) (verilog-indent-declaration, verilog-get-completion-decl) (verilog-goto-defun, verilog-showscopes, verilog-header) (verilog-signals-combine-bus, verilog-read-decls) (verilog-read-always-signals-recurse, verilog-read-instants) (verilog-read-auto-template, verilog-set-define) (verilog-read-defines, verilog-read-signals, verilog-getopt) (verilog-is-number, verilog-expand-dirnames) (verilog-modi-lookup, verilog-modi-cache-results) (verilog-insert-one-definition, verilog-make-width-expression) (verilog-delete-autos-lined, verilog-auto-save-check) (verilog-auto-arg, verilog-auto-inst-port, verilog-auto-inst) (verilog-auto-inst-param, verilog-auto-reg) (verilog-auto-reg-input, verilog-auto-wire, ) (verilog-auto-output, verilog-auto-output-every) (verilog-auto-input, verilog-auto-inout) (verilog-auto-inout-module, verilog-auto-sense) (verilog-auto-reset, verilog-auto-tieoff, verilog-auto-unused) (verilog-auto-ascii-enum, verilog-auto) (verilog-sk-define-signal, verilog-mode-mouse-map) (verilog-load-file-at-mouse, verilog-load-file-at-point) (verilog-library-files): Cleanup spacing of )'s they should not be on unique lines. Fix checkdoc warnings.

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""

	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi

	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ]
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename |
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ]
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile

fi &&


exit 0