Mercurial > emacs
view Makefile.in @ 982:595f9517f205
entered into RCS
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 14 Aug 1992 00:14:17 +0000 |
parents | 593af70322f0 |
children | 56b6d2f4383a |
line wrap: on
line source
# DIST: This is the distribution Makefile for Emacs. configure can # DIST: make most of the changes to this file you might want, so try # DIST: that first. # make all to compile and build Emacs. # make install to install it. # make install.sysv to install on system V. Note that on system V you # must change mandir to /usr/local/man/man1. # make install.xenix to install on Xenix. # make install.aix to install on AIX. # make tags to update tags tables. # # make distclean to delete everything that wasn't in the distribution. # This is a very dangerous thing to do! # make clean # This is a little less dangerous. # make dist # This produces a tar file from the current source tree suitable # for redistribution. SHELL = /bin/sh # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in # subdirectories of this directory. This directory must exist when # you start installation. The default values for many of the # variables below are expressed in terms of this one, so you may not # need to change them. prefix=/usr/local # Where to install Emacs and other binaries that people will want to # run directly (like etags). bindir=${prefix}/bin # A directory under which we will install many of Emacs's files. The # default values for many of the variables below are expressed in # terms of this one, so you may not need to change them. emacsdir=${prefix}/emacs-19.0 # Where to install and expect the architecture-independent data files # (like the tutorial and the Zippy database). datadir=${emacsdir}/etc # Where to install the elisp files distributed with Emacs. Strictly # speaking, all the elisp files should go under datadir (above), since # both elisp source and compiled elisp are completely portable, but # it's traditional to give the lisp files their own subdirectory. lispdir=${emacsdir}/lisp # Directories Emacs should search for elisp files specific to this # site (i.e. customizations), before consulting ${lispdir}. This # should be a colon-separated list of directories. locallisppath=${emacsdir}/local-lisp # Where Emacs will search to find its elisp files. Before changing # this, check to see if your purpose wouldn't better be served by # changing locallisppath. This should be a colon-separated list of # directories. lisppath=${locallisppath}:${lispdir} # Where Emacs will search for its elisp files while building. This is # only used during the process of compiling Emacs, to help Emacs find # its lisp files before they've been installed in their final # location. It's usually identical to lisppath, except that the entry # for the directory containing the installed lisp files has been # replaced with ../lisp. This should be a colon-separated list of # directories. buildlisppath=../lisp # Where to install and expect the files that Emacs modifies as it # runs. These files are all architecture-independent. Right now, # the only such data is the locking directory. statedir=${emacsdir} # Where to create and expect the locking directory, where the Emacs # locking code keeps track of which files are currently being edited. lockdir=${statedir}/lock # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. libdir=${emacsdir}/arch-lib # Where to install Emacs's man pages. mandir=/usr/man/man1 # Where to install and expect the info files describing Emacs. In the # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but # since there are now many packages documented with the texinfo # system, it is inappropriate to imply that it is part of Emacs. infodir=${prefix}/info # ==================== Utility Programs for the Build ==================== # Allow the user to specify the install program. INSTALL = install INSTALLFLAGS = -c INSTALL_PROGRAM = ${INSTALL} INSTALL_DATA = ${INSTALL} # ============================= Targets ============================== # Flags passed down to subdirectory makefiles. MFLAGS = # Subdirectories to make recursively. `lisp' is not included # because the compiled lisp files are part of the distribution # and you cannot remake them without installing Emacs first. SUBDIR = lib-src src # Subdirectories to install, and where they'll go. COPYDIR = arch-lib etc info lisp COPYDESTS = ${libdir} ${datadir} ${infodir} ${lispdir} all: src/paths.h ${SUBDIR} removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/' src/paths.h: Makefile src/paths.h.in lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ /bin/sed < src/paths.h.in > src/paths.h.tmp \ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${libdir}";' \ -e 's;\(#.*PATH_DATA\).*$$;\1 "${datadir}";' \ -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";' ./move-if-change src/paths.h.tmp src/paths.h src: lib-src .RECURSIVE: ${SUBDIR} ${SUBDIR}: FRC cd $@; make ${MFLAGS} all install: all mkdir lockdir -set ${COPYDESTS} ; \ for dir in ${COPYDIR} ; do \ dest=$$1 ; shift ; \ if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xf - ) ; \ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ rm -rf $${subdir}/RCS ; \ rm -f $${subdir}/\#* ; \ rm -f $${subdir}/*~ ; \ done ; \ fi ; \ done ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/emacsclient ${bindir}/emacsclient ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/etags ${bindir}/etags ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c arch-lib/ctags ${bindir}/ctags ${INSTALL_PROGRAM} ${INSTALLFLAGS} -c -m 1755 src/xemacs ${bindir}/xemacs ${INSTALL_DATA} ${INSTALLFLAGS} -c -m 444 etc/emacs.1 ${mandir}/emacs.1 -rm -f ${bindir}/emacs mv ${bindir}/xemacs ${bindir}/emacs install.sysv: all mkdir lockdir -set ${COPYDESTS} ; \ for dir in ${COPYDIR} ; do \ dest=$$1 ; shift ; \ if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ (cd $${dir}; find . -print | cpio -pdum ${dest} ) ; \ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ rm -rf $${subdir}/RCS ; \ rm -f $${subdir}/\#* ; \ rm -f $${subdir}/*~ ; \ done ; \ fi ; \ done -cpset arch-lib/emacsclient ${bindir}/emacsclient 755 bin bin -cpset arch-lib/etags ${bindir}/etags 755 bin bin -cpset arch-lib/ctags ${bindir}/ctags 755 bin bin -cpset etc/emacs.1 ${mandir}/emacs.1 444 bin bin -/bin/rm -f ${bindir}/emacs -cpset src/xemacs ${bindir}/emacs 1755 bin bin install.xenix: all mkdir lockdir -set ${COPYDESTS} ; \ for dir in ${COPYDIR} ; do \ dest=$$1 ; shift ; \ if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xpf - ) ; \ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ rm -rf $${subdir}/RCS ; \ rm -f $${subdir}/\#* ; \ rm -f $${subdir}/*~ ; \ done ; \ fi ; \ done cp arch-lib/etags arch-lib/ctags arch-lib/emacsclient ${bindir} chmod 755 ${bindir}/etags ${bindir}/ctags ${bindir}/emacsclient cp etc/emacs.1 ${mandir}/emacs.1 chmod 444 ${mandir}/emacs.1 -mv -f ${bindir}/emacs ${bindir}/emacs.old cp src/xemacs ${bindir}/emacs chmod 1755 ${bindir}/emacs -rm -f ${bindir}/emacs.old install.aix: all mkdir lockdir -set ${COPYDESTS} ; \ for dir in ${COPYDIR} ; do \ dest=$$1 ; shift ; \ if [ `/bin/pwd`/$${dir} != `(cd $${dest}; /bin/pwd)` ] ; then \ (cd $${dir}; tar cf - . ) | (cd $${dest}; umask 0; tar xBf - ) ; \ for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ rm -rf $${subdir}/RCS ; \ rm -f $${subdir}/\#* ; \ rm -f $${subdir}/*~ ; \ done ; \ fi ; \ done ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/emacsclient ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/etags ${INSTALL_PROGRAM} ${INSTALLFLAGS} -f ${bindir} etc/ctags ${INSTALL_PROGRAM} ${INSTALLFLAGS} -M 1755 -f ${bindir} src/xemacs ${INSTALL_DATA} ${INSTALLFLAGS} -M 444 -f ${mandir} etc/emacs.1 -rm -f ${bindir}/emacs mv ${bindir}/xemacs ${bindir}/emacs # Build all the directories mkdir: FRC # If any of the directories are below ${emacsdir}, create it. -for dir in ${COPYDESTS}; do \ case "$${dir}" in \ ${emacsdir}/* ) \ if [ ! -d ${emacsdir} ]; then \ mkdir ${emacsdir} ; \ chmod 777 ${emacsdir} ; \ fi ; \ break\ ;; \ esac ; \ done -mkdir ${COPYDESTS} -chmod 777 ${COPYDESTS} lockdir: # If the lockdir needs ${emacsdir}, create it. -case "${lockdir}" in \ ${statedir}/* ) \ if [ ! -d ${emacsdir} ]; then \ mkdir ${emacsdir} ; \ chmod 777 ${emacsdir} ; \ fi \ ;; \ esac -mkdir ${LOCKDIR} -chmod 777 ${LOCKDIR} FRC: clean mostlyclean: cd src; make clean if [ `/bin/pwd` != `(cd ${emacsdir}; /bin/pwd)` ] ; then \ (cd etc; make clean); \ (cd lib-src; make clean); \ else true; \ fi cd oldXMenu; make clean distclean: for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} distclean); done -(cd lock; rm *) -rm config.status config-tmp-* -rm #*# *~ realclean: for i in ${SUBDIR}; do (cd $$i; make ${MFLAGS} realclean); done (cd lock; rm *) rm config.status TAGS tags: lib-src cd src; ../arch-lib/etags *.[ch] ../lisp/*.el ../lisp/term/*.el check: @echo "We don't have any tests for GNU Emacs yet." dist: make-dist