view lisp/=gnus-uu.el @ 6782:5b07647ec8f7

*** empty log message ***

;;; gnus-uu.el --- extract, view or save (uu)encoded files from gnus

;; Copyright (C) 1985, 1986, 1987, 1993, 1994 Free Software Foundation, Inc.

;; Author: Lars Ingebrigtsen <[e-mail]>
;; Created: 2 Oct 1993
;; Keyword: news

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

;; All gnus-uu commands start with `C-c C-v'.
;;
;; Typing `C-c C-v C-v' (gnus-uu-decode-and-view) in the summary
;; buffer will try to find all articles in the same series, uudecode
;; them and view the resulting file(s).
;;
;; gnus-uu guesses what articles are in the series according to the
;; following simple rule: The subjects must be identical, except for
;; the last two numbers of the line.
;;
;; For example: If you choose a subject called "cat.gif (2/3)" gnus-uu
;; will find all the articles that matches "^cat.gif
;; ([0-9]+/[0-9]+).*$".  Subjects that are nonstandard, like "cat.gif
;; (2/3) Part 6 of a series", will not be properly recognized by 'C-c
;; C-v C-v', and you have to mark the articles manually with '#'.
;;
;; Typing `C-c C-v v' (gnus-uu-decode-and-save) will do the same as
;; `C-c C-v C-v', except that it will not display the resulting file, but
;; save it instead.
;;
;; Typing `C-c C-v s' (gnus-uu-shar-and-save) does the same as `C-c
;; C-v v', and `C-c C-v C-s' (gnus-uu-shar-and-view) does the same as
;; `C-c C-v C-v', except that they unshar files instead, i. e. run
;; them through /bin/sh. Most shar files can be viewed and/or saved
;; with the normal uudecode commands, which is much safer, as no
;; foreign code is run.
;;
;; `#' (gnus-uu-mark-article) marks an article for later
;; decoding/unsharing/saving/viewing. The files will be decoded in the
;; sequence they were marked. To decode the files after you've marked
;; the articles you are interested in, type the corresponding key
;; strokes as the normal decoding commands, but put a `M-' in the last
;; keystroke. For instance, to perform a standard uudecode and view,
;; you would type `C-c C-v C-v'. To perform a marked uudecode and
;; view, say `C-v C-v M-C-v'. All the other view and save commands are
;; handled the same way; marked uudecode and save is then `C-c C-v
;; M-v'.
;;
;; `M-#' (gnus-uu-unmark-article) will remove the mark from a
;; previosly marked article.
;;
;; `C-c C-v C-u' (gnus-uu-unmark-all-articles) will remove the mark from
;; all marked articles.
;;
;; `C-c C-v C-r' (gnus-uu-mark-by-regexp) will prompt for a regular
;; expression and mark (forward) all articles matching that regular
;; expression.
;;
;; There's an additional way to reach the decoding functions to make
;; future expansions easier: `C-c C-v C-m'
;; (gnus-uu-multi-decode-and-view) and the corresponding save, marked
;; view and marked save keystrokes, `C-c C-v m', `C-c C-v M-C-m' and
;; `C-c C-v M-m' respectively. You will be prompted for decoding
;; method, like uudecode, shar, binhex or plain save. Note that
;; methods like binhex and save doesn't have view modes; even if you
;; issue a view command (`C-c C-v C-m' and "binhex"), gnus-uu will
;; just save the resulting binhex file.
;;
;; `C-c C-v C-b' (gnus-uu-decode-and-show-in-buffer) will decode the
;; current article and display the results in an emacs buffer. This
;; might be useful if there's jsut some text in the current article
;; that has been uuencoded by some perverse poster.
;;
;; `C-c C-v a' (gnus-uu-decode-and-save-all-articles) looks at all the
;; articles in the current newsgroup and tries to uudecode everything
;; it can find. The user will be prompted for a directory where the
;; resulting files (if any) will be stored. `C-c C-v M-a' only looks
;; at unread article. `C-c C-v w' does the same as `C-c C-v a', but
;; also marks as read all articles it has peeked through, even if they
;; weren't uuencoded articles. `C-c C-v M-w' is, as you might have
;; guessed, similar to `C-c C-v M-a'.
;;
;; `C-c C-v C-l' (gnus-uu-edit-begin-line) lets you edit the begin
;; line of the current buffer. Useful to change an incorrect suffix or
;; an incorrect begin line.
;;
;;
;; When using the view commands, `C-c C-v C-v' for instance, gnus-uu
;; will (normally, see below) try to view the file according to the
;; rules given in gnus-uu-default-view-rules and
;; gnus-uu-user-view-rules. If it recognises the file, it will display
;; it immediately. If the file is some sort of archive, gnus-uu will
;; attempt to unpack the archive and see if any of the files in the
;; archive can be viewed. For instance, if you have a gzipped tar file
;; "pics.tar.gz" containing the files "pic1.jpg" and "pic2.gif",
;; gnus-uu will uncompress and detar the main file, and then view the
;; two pictures. This unpacking process is recursive, so if the
;; archive contains archives of archives, it'll all be unpacked.
;;
;; If the view command doesn't recognise the file type, or can't view
;; it because you don't have the viewer, or can't view *any* of the
;; files in the archive, the user will be asked if she wishes to have
;; the file saved somewhere. Note that if the decoded file is an
;; archive, and gnus-uu manages to view some of the files in the
;; archive, it won't tell the user that there were some files that
;; were unviewable. See "Interactive view" for a different approach.
;;
;;
;; Note that gnus-uu adds a function to `gnus-exit-group-hook' to
;; clear the list of marked articles and check for any generated files
;; that might have escaped deletion if the user typed `C-g'.
;;
;;
;; `C-c C-v C-a' (gnus-uu-toggle-asynchronous) toggles the
;; gnus-uu-asynchronous variable. See below for explanation.
;;
;; `C-c C-v C-q' (gnus-uu-toggle-query) toggles the
;; gnus-uu-ask-before-view variable. See below for explanation.
;;
;; `C-c C-v C-p' (gnus-uu-toggle-always-ask) toggles the
;; gnus-uu-view-and-save variable. See below for explanation.
;;
;; `C-c C-v C-k' (gnus-uu-toggle-kill-carriage-return) toggles the
;; gnus-uu-kill-carriage-return variable. See below for explanation.
;;
;; `C-c C-v C-i' (gnus-uu-toggle-interactive-view) toggles interactive
;; mode. If it is turned on, gnus-uu won't view files immediately but
;; give you a buffer with the default commands and files and lets you
;; edit the commands and execute them at leisure.
;;
;; `C-c C-v C-t' (gnus-uu-toggle-any-variable) is an interface to the
;; five toggle commands listed above.
;;
;; gnus-uu-toggle-correct-stripped-articles toggles whether to check
;; and correct uuencoded articles that may have had trailing spaces
;; stripped by mailers.
;;
;;
;; Customization
;;
;; To load this file when starting gnus, put sumething like the
;; following in your .emacs file:
;;
;;   (setq gnus-group-mode-hook
;;      '(lambda () (load "gnus-uu")))
;;
;; To make gnus-uu use, for instance, "xli" to view JPEGs and GIFs,
;; put this in your .emacs file:
;;
;;   (setq gnus-uu-user-view-rules 
;;	 (list
;;	  '("jpg$\\|gif$" "xli") 
;;	  ))
;;
;; This variable is a list where each list item is a list containing
;; two strings. The first string is a regular expression. If the file
;; name is matched by this expression, the command given in the
;; second string is executed on this file. If the command contains
;; "%s", the file will be inserted there in the command string. Eg.
;; "giftoppm %s | xv -" will result in the file name being inserted at
;; the "%s".
;;
;; If you don't want to display certain file types, like if you
;; haven't got sound capabilities, you could put something like
;;
;;   (setq gnus-uu-user-view-rules 
;;	 (list
;;	  '("au$\\|voc$\\|wav$" nil) 
;;	  ))
;;
;; in your .emacs file.
;;
;; There's a similar variable called 'gnus-uu-user-archive-rules'
;; which gives a list of unarcers to use when looking inside archives
;; for files to display.
;;
;; If you don't want gnus-uu to look inside archives for files to
;; display, say
;;
;;   (setq gnus-uu-do-not-unpack-archives t)
;;
;;
;; If you want gnus-uu to ask you if you want to save a file after
;; viewing, say
;;
;;   (setq gnus-uu-view-and-save t)
;;
;;
;; If you don't want to wait for the viewing command to finish before
;; returning to emacs, say
;;
;;   (setq gnus-uu-asynchronous t)
;;
;;
;; This can be useful if you're viewing long .mod files, for instance,
;; which often takes several minutes. Note, however, that since
;; gnus-uu doesn't ask, and if you are viewing an archive with lots of
;; viewable files, you'll get them all up more or less at once, which
;; can be confusing, to say the least. To get gnus-uu to ask you
;; before viewing a file, say
;;
;;   (setq gnus-uu-ask-before-view t)
;;
;; You can set this variable even if you're not using asynchronous
;; viewing, of course.
;;
;; If the articles has been posted by some numbscull with a PC (isn't
;; that a bit redundant, though?) and there's lots of carriage returns
;; everywhere, say
;;
;;   (setq gnus-uu-kill-carriage-return t)
;;
;; If you want gnus-uu to ignore the default file rules when viewing,
;; for instance if there's several file types that you can't view, set
;; `gnus-uu-ignore-default-view-rules' to `t'. There's a similar
;; variable to disable the default unarchive rule list,
;; `gnus-uu-ignore-default-archive-rules'.
;;
;; If you want a more interactive approach to file viewing, say
;;
;;   (setq gnus-uu-use-interactive-view t)
;;
;; If this variable is set, whenever you type `C-c C-v C-v' (or any of
;; the other view commands), gnus-uu will present you with a buffer
;; with the default actions and file names after decoding. You can
;; edit the command lines and execute them in a convenient fashion.
;; The output from the commands will be displayed in a small window at
;; the bottom of the emacs window. End interactive mode by typing `C-c
;; C-c' in the view window.
;;
;; If you want gnus-uu to unmark articles that you have asked to
;; decode, but can't be decoded (if, for instance, the articles aren't
;; uuencoded files or the posting is incomplete), say
;;
;;   (setq gnus-uu-unmark-articles-not-decoded t)
;;
;;
;; History
;;
;; v1.0: First version released Oct 2 1992.
;;
;; v1.1: Changed `C-c C-r' to `C-c C-e' and `C-c C-p' to `C-c C-k'.
;; Changed (setq gnus-exit-group-hook) to (add-hook).  Removed
;; checking for "Re:" for finding parts.
;;
;; v2.2: Fixed handling of currupted archives. Changed uudecoding to
;; an asynchronous process to avoid loading tons of data into emacs
;; buffers. No longer reads articles emacs already have aboard.  Fixed
;; a firmer support for shar files. Made regexp searches for files
;; more convenient. Added `C-c C-l' for editing uucode begin
;; lines. Added multi-system decoder entry point. Added interactive
;; view mode. Added function for decoding and saving all uuencoded
;; articles in the current newsgroup.
;;
;; v2.3: After suggestions I have changed all the gnus-uu key bindings
;; to avoid hogging all the user keys (C-c LETTER). Also added
;; (provide) and fixed some saving stuff. First posted version to
;; gnu.emacs.sources.
;;
;; v2.4: Fixed some more in the save-all category. Automatic fixing of
;; uucode "begin" lines: names on the form of "dir/file" are
;; translated into "dir-file". Added a function for fixing stripped
;; uucode articles. Added binhex save.
;;
;;
;; Keymap overview:
;; 
;; All commands start with `C-c C-v'. The difference is in the third
;; keystroke.  All view commands are `C-LETTER'. All save commands are
;; just `LETTER'. All marked commands are the same as the unmarked
;; commands, except that they have `M-' before in the last keystroke.
;;
;; `C-c C-v C-v'      gnus-uu-decode-and-view
;; `C-c C-v v'        gnus-uu-decode-and-save
;; `C-c C-v C-s'      gnus-uu-shar-and-view
;; `C-c C-v s'        gnus-uu-shar-and-save
;; `C-c C-v C-m'      gnus-uu-multi-decode-and-view
;; `C-c C-v m'        gnus-uu-multi-decode-and-save
;;
;; `C-c C-v C-b'      gnus-uu-decode-and-show-in-buffer
;; `C-c C-v C-l'      gnus-uu-edit-begin-line
;; `C-c C-v M-a'      gnus-uu-decode-and-save-all-unread-articles
;; `C-c C-v a'        gnus-uu-decode-and-save-all-articles
;; `C-c C-v M-w'      gnus-uu-decode-and-save-all-unread-articles-and-mark
;; `C-c C-v w'        gnus-uu-decode-and-save-all-articles-and-mark
;;
;; `#'                gnus-uu-mark-article
;; `M-#'              gnus-uu-unmark-article
;; `C-c C-v C-u'      gnus-uu-unmark-all-articles
;; `C-c C-v C-r'      gnus-uu-mark-by-regexp
;; `C-c C-v M-C-v'    gnus-uu-marked-decode-and-view
;; `C-c C-v M-v'      gnus-uu-marked-decode-and-save
;; `C-c C-v M-C-s'    gnus-uu-marked-shar-and-view
;; `C-c C-v M-s'      gnus-uu-marked-shar-and-save
;; `C-c C-v M-C-m'    gnus-uu-marked-multi-decode-and-view
;; `C-c C-v M-m'      gnus-uu-marked-multi-decode-and-save
;;
;; `C-c C-v C-a'      gnus-uu-toggle-asynchronous
;; `C-c C-v C-q'      gnus-uu-toggle-query
;; `C-c C-v C-p'      gnus-uu-toggle-always-ask
;; `C-c C-v C-k'      gnus-uu-toggle-kill-carriage-return
;; `C-c C-v C-i'      gnus-uu-toggle-interactive-view
;; `C-c C-v C-t'      gnus-uu-toggle-any-variable

;;; Code: 

(require 'gnus)

;; Binding of keys to the gnus-uu functions.

(defvar gnus-uu-ctl-map nil)
(define-prefix-command 'gnus-uu-ctl-map)
(define-key gnus-summary-mode-map "\C-c\C-v" gnus-uu-ctl-map)

(define-key gnus-uu-ctl-map "\C-v" 'gnus-uu-decode-and-view)
(define-key gnus-uu-ctl-map "v" 'gnus-uu-decode-and-save)
(define-key gnus-uu-ctl-map "\C-s" 'gnus-uu-shar-and-view)
(define-key gnus-uu-ctl-map "s" 'gnus-uu-shar-and-save)
(define-key gnus-uu-ctl-map "\C-m" 'gnus-uu-multi-decode-and-view)
(define-key gnus-uu-ctl-map "m" 'gnus-uu-multi-decode-and-save)

(define-key gnus-uu-ctl-map "\C-b" 'gnus-uu-decode-and-show-in-buffer)

(define-key gnus-summary-mode-map "#" 'gnus-uu-mark-article)
(define-key gnus-summary-mode-map "\M-#" 'gnus-uu-unmark-article)
(define-key gnus-uu-ctl-map "\C-u" 'gnus-uu-unmark-all-articles)
(define-key gnus-uu-ctl-map "\C-r" 'gnus-uu-mark-by-regexp)

(define-key gnus-uu-ctl-map "\M-\C-v" 'gnus-uu-marked-decode-and-view)
(define-key gnus-uu-ctl-map "\M-v" 'gnus-uu-marked-decode-and-save)
(define-key gnus-uu-ctl-map "\M-\C-s" 'gnus-uu-marked-shar-and-view)
(define-key gnus-uu-ctl-map "\M-s" 'gnus-uu-marked-shar-and-save)
(define-key gnus-uu-ctl-map "\M-\C-m" 'gnus-uu-marked-multi-decode-and-view)
(define-key gnus-uu-ctl-map "\M-m" 'gnus-uu-marked-multi-decode-and-save)

(define-key gnus-uu-ctl-map "\C-a" 'gnus-uu-toggle-asynchronous)
(define-key gnus-uu-ctl-map "\C-q" 'gnus-uu-toggle-query)
(define-key gnus-uu-ctl-map "\C-p" 'gnus-uu-toggle-always-ask)
(define-key gnus-uu-ctl-map "\C-k" 'gnus-uu-toggle-kill-carriage-return)
(define-key gnus-uu-ctl-map "\C-i" 'gnus-uu-toggle-interactive-view)
(define-key gnus-uu-ctl-map "\C-t" 'gnus-uu-toggle-any-variable)

(define-key gnus-uu-ctl-map "\C-l" 'gnus-uu-edit-begin-line)

(define-key gnus-uu-ctl-map "\M-a" 'gnus-uu-decode-and-save-all-unread-articles)
(define-key gnus-uu-ctl-map "a" 'gnus-uu-decode-and-save-all-articles)
(define-key gnus-uu-ctl-map "\M-w" 'gnus-uu-decode-and-save-all-unread-articles-and-mark)
(define-key gnus-uu-ctl-map "w" 'gnus-uu-decode-and-save-all-articles-and-mark)

;(load "rnewspost")
;(define-key news-reply-mode-map "\C-c\C-v" 'gnus-uu-uuencode-and-post)

;; Default viewing action rules

(defconst gnus-uu-default-view-rules 
  (list 
   '("\\.\\(jpe?g\\|gif\\|tiff?\\|p[pgb]m\\|xwd\\|xbm\\|pcx\\)$" "xv")
   '("\\.tga$" "tgatoppm %s | xv -")
   '("\\.te?xt$\\|\\.doc$\\|read.*me" "xterm -e less")
   '("\\.fli$" "xflick")
   '("\\.\\(wav\\|aiff\\|hcom\\|u[blw]\\|s[bfw]\\|voc\\|smp\\)$" 
     "sox -v .5 %s -t .au -u - > /dev/audio")
   '("\\.au$" "cat %s > /dev/audio")
   '("\\.mod$" "str32")
   '("\\.ps$" "ghostview")
   '("\\.dvi$" "xdvi")
   '("\\.1$" "xterm -e man -l")
   '("\\.html$" "xmosaic")
   '("\\.mpe?g$" "mpeg_play")
   '("\\.\\(tar\\|arj\\|zip\\|zoo\\|arc\\|gz\\|Z\\|lzh\\|ar\\)$" 
     "gnus-uu-archive"))


  "This constant is a list that gives the default actions to be taken
when the user asks to view a file. To change the behaviour, you can
either edit this constant or set 'gnus-uu-user-view-rules' to
something useful. To add a default \"end\" rule, edit the
'gnus-uu-user-view-rules-end' variable.

For example:

To make gnus-uu use 'xli' to display JPEG and GIF files, put the
following in your .emacs file

  (setq gnus-uu-user-view-rules (list '(\"jpg$\\\\|gif$\" \"xli\")))

Both these variables are lists of lists of strings, where the first
string is a regular expression. If the file name matches this regular
expression, the command in the second string is fed the file.

If the command string contains \"%s\", the file name will be inserted
at that point in the command string. If there's no \"%s\" in the
command string, the file name will be appended to the command before
executing.  ")

(defvar gnus-uu-user-view-rules nil 
  "User variable. See explanation of the 'gnus-uu-default-view-rules' for 
details.")

(defvar gnus-uu-user-view-rules-end nil
  "The user may use this variable to provide default viewing rules.")

(defvar gnus-uu-user-interactive-view-rules nil
  "If this variable is set and interactive mode is to be used, this
variable will be used instead of gnus-uu-user-view-rules.")

(defvar gnus-uu-user-interactive-view-rules-end nil
  "If this variable is set and interactive mode is to be used, this
variable will be used instead of gnus-uu-user-view-rules-end.")

(defconst gnus-uu-default-interactive-view-rules-begin
  (list
   '("\\.te?xt$\\|\\.doc$\\|read.*me\\|\\.c?$\\|\\.h$\\|\\.bat$\\|\\.asm$\\|makefile" "cat %s | sed s/
//g")
   '("\\.pas$" "cat %s | sed s/
//g")
   ))


;; Default unpacking commands

(defconst gnus-uu-default-archive-rules 
  (list '("\\.tar$" "tar xf")
	'("\\.zip$" "unzip")
	'("\\.ar$" "ar x")
	'("\\.arj$" "unarj x")
	'("\\.zoo$" "zoo -e")
	'("\\.lzh$" "lha x")
	'("\\.Z$" "uncompress")
	'("\\.gz$" "gunzip")
	'("\\.arc$" "arc -x"))
  "*")
(defvar gnus-uu-user-archive-rules nil)


;; Various variables users may set 

(defvar gnus-uu-tmp-dir "/tmp/" 
  "Variable saying where gnus-uu is to do its work. Default is \"/tmp/\".")

(defvar gnus-uu-do-not-unpack-archives nil 
  "Set this variable if you don't want gnus-uu to look inside
archives for files to display. Default is `nil'.")

(defvar gnus-uu-do-not-unpack-archives nil 
  "Set this variable if you don't want gnus-uu to look inside
archives for files to display. Default is `nil'.")

(defvar gnus-uu-view-and-save nil 
  "Set this variable if you want to be asked if you want to save the
file after viewing. If this variable is nil, which is the default, 
gnus-uu won't offer to save a file if viewing is successful. Default
is `nil'.")

(defvar gnus-uu-asynchronous nil
  "Set this variable to `t' if you don't want gnus-uu to wait until 
the viewing command has ended before returning control to emacs.
Default is `nil'.")

(defvar gnus-uu-ask-before-view nil
  "Set this variable to `t' if you want gnus-uu to ask you before 
viewing every file. Useful when `gnus-uu-asynchronous' is set. Default
is `nil'.")

(defvar gnus-uu-ignore-default-view-rules nil
  "Set this variable if you want gnus-uu to ignore the default viewing
rules and just use the rules given in gnus-uu-user-view-rules. Default
is `nil'.")

(defvar gnus-uu-ignore-default-archive-rules nil
  "Set this variable if you want gnus-uu to ignore the default archive
unpacking commands and just use the rules given in 
gnus-uu-user-archive-rules. Default is `nil'.")

(defvar gnus-uu-kill-carriage-return t
  "Set this variable if you want to remove all carriage returns from
the mail articles. Default is `t'.")

(defvar gnus-uu-unmark-articles-not-decoded nil
  "If this variable is set, artciles that are unsuccessfully decoded
are marked as unread. Default is `nil'.")

(defvar gnus-uu-output-window-height 20 
  "This variable says how hight the output buffer window is to be when
using interactive view mode. Change it at your convenience. Default is 20.")

(defvar gnus-uu-correct-stripped-uucode nil
  "If this variable is set, gnus-uu will try to correct uuencoded files that
have had trailing spaces stripped by nosy mail saoftware. Default is `nil'.")

(defvar gnus-uu-use-interactive-view nil
  "If this variable is set, gnus-uu will create a special buffer where
the user may choose interactively which files to view and how. Default
is `nil'.")


;; Internal variables

(defconst gnus-uu-begin-string "^begin[ \t]+[0-7][0-7][0-7][ \t]+\\(.*\\)$" 
  "*")
(defconst gnus-uu-end-string "^end[ \t]*$")
(defconst gnus-uu-body-line
"^M.............................................................?$" "*")
(defconst gnus-uu-shar-begin-string "^#! */bin/sh" "*")

(defvar gnus-uu-shar-file-name nil "*")
(defconst gnus-uu-shar-name-marker "begin [0-7][0-7][0-7][ \t]+\\(\\(\\w\\|\\.\\)*\\b\\)" "*")
(defvar gnus-uu-shar-directory nil)

(defvar gnus-uu-file-name nil)
(defconst gnus-uu-uudecode-process nil)

(defvar gnus-uu-interactive-file-list nil)
(defvar gnus-uu-marked-article-list nil)
(defvar gnus-uu-generated-file-list nil)

(defconst gnus-uu-interactive-buffer-name "*gnus-uu interactive*")
(defconst gnus-uu-output-buffer-name "*Gnus UU Output*")
(defconst gnus-uu-result-buffer "*Gnus UU Result Buffer*")


;; Interactive functions

;; UUdecode and view

(defun gnus-uu-decode-and-view ()
  "UUdecodes and 'views' (if possible) the resulting file.
'Viewing' can be any action at all, as defined in the 
'gnus-uu-file-action-list' variable. Running 'xv' on gifs and
'play' on au files are popular actions. If the file can't be viewed,
the user is asked if she would like to save the file instead."
  (interactive)
  (gnus-uu-decode-and-view-or-save t nil))

(defun gnus-uu-decode-and-save ()
  "uudecodes and saves the resulting file."
  (interactive)
  (gnus-uu-decode-and-view-or-save nil nil))

(defun gnus-uu-marked-decode-and-view ()
  "The marked equivalent to gnus-uu-decode-and-view."
  (interactive)
  (gnus-uu-decode-and-view-or-save t t))

(defun gnus-uu-marked-decode-and-save ()
  "The marked equivalent to gnus-uu-decode-and-save."
  (interactive)
  (gnus-uu-decode-and-view-or-save nil t))
      

;; Unshar and view

(defun gnus-uu-shar-and-view ()
  "Does the same as gnus-uu-decode-and-view for shar files."
  (interactive)
  (gnus-uu-unshar-and-view-or-save t nil))

(defun gnus-uu-shar-and-save ()
  "Does the same as gnus-uu-decode-and-save for shar files."
  (interactive)
  (gnus-uu-unshar-and-view-or-save nil nil))

(defun gnus-uu-marked-shar-and-view ()
  "The marked equivalent to gnus-uu-shar-and-view."
  (interactive)
  (gnus-uu-unshar-and-view-or-save t t))

(defun gnus-uu-marked-shar-and-save ()
  "The marked equivalent to gnus-uu-shar-and-save."
  (interactive)
  (gnus-uu-unshar-and-view-or-save nil t))


;; Decode and show in buffer

(defun gnus-uu-decode-and-show-in-buffer ()
  "uudecodes the current article and displays the result in a buffer."
  (interactive)
  (let ((uu-buffer (get-buffer-create gnus-uu-output-buffer-name))
	list-of-articles file-name)
    (save-excursion
      (and 
       (setq list-of-articles (list gnus-current-article))
       (gnus-uu-grab-articles list-of-articles 'gnus-uu-uustrip-article-as)
       (setq file-name (gnus-uu-decode gnus-uu-tmp-dir))
       (progn
	 (save-excursion
	   (set-buffer uu-buffer)
	   (erase-buffer)
	   (insert-file-contents file-name))
	 (set-window-buffer (get-buffer-window gnus-article-buffer) 
			    uu-buffer)
	 (message (format "Showing file %s in buffer" file-name))
	 (delete-file file-name))))))


;; Toggle commands      

(defun gnus-uu-toggle-asynchronous ()
  "This function toggles asynchronous viewing."
  (interactive)
  (if (setq gnus-uu-asynchronous (not gnus-uu-asynchronous))
      (message "gnus-uu will now view files asynchronously")
    (message "gnus-uu will now view files synchronously")))

(defun gnus-uu-toggle-query ()
  "This function toggles whether to ask before viewing or not."
  (interactive)
  (if (setq gnus-uu-ask-before-view (not gnus-uu-ask-before-view))
      (message "gnus-uu will now ask before viewing")
    (message "gnus-uu will now view without asking first")))

(defun gnus-uu-toggle-always-ask ()
  "This function toggles whether to ask saving a file even after successful
viewing."
  (interactive)
  (if (setq gnus-uu-view-and-save (not gnus-uu-view-and-save))
      (message "gnus-uu will now ask to save the file after viewing")
    (message "gnus-uu will now not ask to save after successful viewing")))

(defun gnus-uu-toggle-interactive-view ()
  "This function toggles whether to use interactive view."
  (interactive)
  (if (setq gnus-uu-use-interactive-view (not gnus-uu-use-interactive-view))
      (message "gnus-uu will now use interactive view")
    (message "gnus-uu will now use non-interactive view")))

(defun gnus-uu-toggle-unmark-undecoded ()
  "This function toggles whether to unmark articles not decoded."
  (interactive)
  (if (setq gnus-uu-unmark-articles-not-decoded 
	    (not gnus-uu-unmark-articles-not-decoded))
      (message "gnus-uu will now unmark articles not decoded")
    (message "gnus-uu will now not unmark articles not decoded")))

(defun gnus-uu-toggle-kill-carriage-return ()
  "This function toggles the stripping of carriage returns from the articles."
  (interactive)
  (if (setq gnus-uu-kill-carriage-return (not gnus-uu-kill-carriage-return))
      (message "gnus-uu will now strip carriage returns")
    (message "gnus-uu won't strip carriage returns")))

(defun gnus-uu-toggle-correct-stripped-uucode ()
  "This function toggles whether to correct stripped uucode."
  (interactive)
  (if (setq gnus-uu-correct-stripped-uucode 
	    (not gnus-uu-correct-stripped-uucode))
      (message "gnus-uu will now correct stripped uucode")
    (message "gnus-uu won't check and correct stripped uucode")))

(defun gnus-uu-toggle-any-variable ()
  "This function ask what variable the user wants to toggle."
  (interactive)
  (let (rep)
    (message "(a)sync, (q)uery, (p)ask, (k)ill CR, (i)nteractive, (u)nmark, (c)orrect")
    (setq rep (read-char))
    (if (= rep ?a)
	(gnus-uu-toggle-asynchronous))
    (if (= rep ?q)
	(gnus-uu-toggle-query))
    (if (= rep ?p)
	(gnus-uu-toggle-always-ask))
    (if (= rep ?k)
	(gnus-uu-toggle-kill-carriage-return))
    (if (= rep ?u)
	(gnus-uu-toggle-unmark-undecoded))
    (if (= rep ?c)
	(gnus-uu-toggle-correct-stripped-uucode))
    (if (= rep ?i)
	(gnus-uu-toggle-interactive-view))))


;; Edit line

(defun gnus-uu-edit-begin-line ()
  "Edit the begin line of the current article."
  (interactive)
  (let ((buffer-read-only nil)
	begin b)
    (save-excursion
      (set-buffer gnus-article-buffer)
      (goto-line 1)
      (if (not (re-search-forward "begin " nil t))
	  (progn (message "No begin line in the current article") (sit-for 2))
	(beginning-of-line)
	(setq b (point))
	(end-of-line)
	(setq begin (buffer-substring b (point)))
	(setq begin (read-string "" begin))
	(setq buffer-read-only nil)
	(delete-region b (point))
	(insert-string begin)))))

;; Multi functions

(defun gnus-uu-multi-decode-and-view ()
  "This function lets the user decide what method to use for decoding.
Other than that, it's equivalent to the other decode-and-view functions."
  (interactive)
  (gnus-uu-multi-decode-and-view-or-save t nil))

(defun gnus-uu-multi-decode-and-save ()
  "This function lets the user decide what method to use for decoding.
Other than that, it's equivalent to the other decode-and-save functions."
  (interactive)
  (gnus-uu-multi-decode-and-view-or-save nil nil))

(defun gnus-uu-marked-multi-decode-and-view ()
  "This function lets the user decide what method to use for decoding.
Other than that, it's equivalent to the other marked decode-and-view 
functions."
  (interactive)
  (gnus-uu-multi-decode-and-view-or-save t t))

(defun gnus-uu-marked-multi-decode-and-save ()
  "This function lets the user decide what method to use for decoding.
Other than that, it's equivalent to the other marked decode-and-save 
functions."
  (interactive)
  (gnus-uu-multi-decode-and-view-or-save t t))

(defun gnus-uu-multi-decode-and-view-or-save (view marked)
  (let (decode-type)
    (message "(u)udecode, (s)har, s(a)ve, (b)inhex: ")
    (setq decode-type (read-char))
    (if (= decode-type ?
) (setq decode-type ?u))
    (if (= decode-type ?u)
	(gnus-uu-decode-and-view-or-save view marked)
      (if (= decode-type ?s)
	  (gnus-uu-unshar-and-view-or-save view marked)
	(if (= decode-type ?b)
	    (gnus-uu-binhex-and-save view marked)
	  (if (= decode-type ?a)
	      (gnus-uu-save-articles view marked)
	    (message (format "Unknown decode method '%c'." decode-type))
	    (sit-for 2)))))))


;; uuencode and post

(defun gnus-uu-news-inews ()
  "Send a news message using inews."
  (interactive)
  (let* (newsgroups subject
		    (case-fold-search nil))
    (save-excursion
      (save-restriction
	(goto-char (point-min))
	(search-forward (concat "\n" mail-header-separator "\n"))
	(narrow-to-region (point-min) (point))
	(setq newsgroups (mail-fetch-field "newsgroups")
	      subject (mail-fetch-field "subject")))
      (widen)
      (goto-char (point-min))
;      (run-hooks 'news-inews-hook)
      (goto-char (point-min))
      (search-forward (concat "\n" mail-header-separator "\n"))
      (replace-match "\n\n")
      (goto-char (point-max))
      ;; require a newline at the end for inews to append .signature to
      (or (= (preceding-char) ?\n)
	  (insert ?\n))
      (message "Posting to USENET...")
      (call-process-region (point-min) (point-max) 
			   news-inews-program nil 0 nil
			   "-h")	; take all header lines!
			   ;@@ setting of subject and newsgroups still needed?
			   ;"-t" subject
			   ;"-n" newsgroups
      (message "Posting to USENET... done")
      (goto-char (point-min))		;restore internal header separator
      (search-forward "\n\n")
      (replace-match (concat "\n" mail-header-separator "\n")))))

(autoload 'news-inews "rnewspost")

(defun gnus-uu-post-buffer (&optional first)
  (append-to-file 1 (point-max) "/tmp/gnusuutull")
;  (if first
;      (news-inews)
;    (gnus-uu-news-inews))
  (message "posted"))

(defconst gnus-uu-uuencode-post-length 20)

(defun gnus-uu-uuencode-and-post ()
  (interactive)
  (let (file uubuf sendbuf short-file length parts header i end beg
	     beg-line minlen)
    (setq file (read-file-name 
		"What file do you want to uuencode and post? " "~/Unrd.jpg"))
    (if (not (file-exists-p file))
	(message "%s: No such file" file)
      (save-excursion
	(setq uubuf (get-buffer-create "*uuencode buffer*"))
	(setq sendbuf (get-buffer-create "*uuencode send buffer*"))
	(set-buffer uubuf)
	(erase-buffer)
	(if (string-match "^~/" file)
	    (setq file (concat "$HOME" (substring file 1))))
	(if (string-match "/[^/]*$" file)
	    (setq short-file (substring file (1+ (match-beginning 0))))
	  (setq short-file file))
	(call-process "sh" nil uubuf nil "-c" 
		      (format "uuencode %s %s" file short-file))
	(goto-char 1)
	(forward-line 1)
	(while (re-search-forward " " nil t)
	  (replace-match "`"))
	(setq length (count-lines 1 (point-max)))
	(setq parts (/ length gnus-uu-uuencode-post-length))
	(if (not (< (% length gnus-uu-uuencode-post-length) 4))
	    (setq parts (1+ parts)))
	(message "Det er %d parts" parts))
      (goto-char 1)
      (search-forward mail-header-separator nil t)
      (beginning-of-line)
      (forward-line 1)
      (setq header (buffer-substring 1 (point)))
      (goto-char 1)
      (if (re-search-forward "^Subject: " nil t)
	  (progn
	    (end-of-line)
	    (insert (format " (0/%d)" parts))))
      (gnus-uu-post-buffer t)
      (save-excursion
	(set-buffer sendbuf)
	(setq i 1)
	(setq beg 1)
	(while (not (> i parts))
	  (set-buffer sendbuf)
	  (erase-buffer)
	  (insert header)
	  (insert "\n")
	  (setq minlen (/ (- 62 (length (format " (%d/%d) " i parts))) 2))
	  (setq beg-line (format "[ cut here %s (%d/%d) %s gnus-uu ]\n" 
			  (make-string (- minlen 11) ?-) i parts
			  (make-string (- minlen 10) ?-)))
	  (insert beg-line)
	  (goto-char 1)
	  (if (re-search-forward "^Subject: " nil t)
	      (progn
		(end-of-line)
		(insert (format " (%d/%d)" i parts))))
	  (goto-char (point-max))
	  (save-excursion
	    (set-buffer uubuf)
	    (goto-char beg)
	    (if (= i parts)
		(goto-char (point-max))
	      (forward-line gnus-uu-uuencode-post-length))
	    (setq end (point)))
	  (insert-buffer-substring uubuf beg end)
	  (insert beg-line)
	  (setq beg end)
	  (setq i (1+ i))
	  (gnus-uu-post-buffer)))
      )))



;; Decode and all files

(defconst gnus-uu-rest-of-articles nil)
(defconst gnus-uu-do-sloppy-uudecode nil)
(defvar gnus-uu-current-save-dir nil "*")

(defun gnus-uu-decode-and-save-all-unread-articles ()
  "This function reads all unread articles in the current group and
sees whether it can uudecode the articles. The user will be prompted
for an directory to put the resulting (if any) files."
  (interactive)
  (gnus-uu-decode-and-save-articles t t))

(defun gnus-uu-decode-and-save-all-articles ()
  "Does the same as gnus-uu-decode-and-save-all-unread-articles, except
that it grabs all articles visible, unread or not."
  (interactive)
  (gnus-uu-decode-and-save-articles nil t))

(defun gnus-uu-decode-and-save-all-unread-articles-and-mark ()
  "Does the same as gnus-uu-decode-and-save-all-unread-articles, except that 
it marks everything as read, even if it couldn't decode the articles."
  (interactive)
  (gnus-uu-decode-and-save-articles t nil))

(defun gnus-uu-decode-and-save-all-articles-and-mark ()
  "Does the same as gnus-uu-decode-and-save-all-articles, except that 
it marks everything as read, even if it couldn't decode the articles."
  (interactive)
  (gnus-uu-decode-and-save-articles nil nil))

(defun gnus-uu-decode-and-save-articles (&optional unread unmark)
  (let ((gnus-uu-unmark-articles-not-decoded unmark)
	(filest "")
	where dir did unmark saved-list)
    (setq gnus-uu-do-sloppy-uudecode t)
    (setq dir (gnus-uu-read-directory "Where do you want the files? "))
    (message "Grabbing...")
    (setq gnus-uu-rest-of-articles 
	  (gnus-uu-get-list-of-articles "^." nil unread))
    (setq gnus-uu-file-name nil)
    (while (and gnus-uu-rest-of-articles 
		(gnus-uu-grab-articles gnus-uu-rest-of-articles 
				       'gnus-uu-uustrip-article-as))
      (if gnus-uu-file-name
	  (progn
	    (setq saved-list (cons gnus-uu-file-name saved-list))
	    (rename-file (concat gnus-uu-tmp-dir gnus-uu-file-name) 
			 (concat dir gnus-uu-file-name) t)
	    (setq did t)
	    (setq gnus-uu-file-name nil))))
    (if (not did)
	()
      (while saved-list
	(setq filest (concat filest " " (car saved-list)))
	(setq saved-list (cdr saved-list)))
      (message "Saved%s" filest)))
  (setq gnus-uu-do-sloppy-uudecode nil))


;; Work functions

(defun gnus-uu-decode-and-view-or-save (view marked)
  (gnus-uu-initialize)
  (let (file decoded)
    (save-excursion
      (if (gnus-uu-decode-and-strip nil marked)
	  (progn
	    (setq decoded t)
	    (setq file (concat gnus-uu-tmp-dir gnus-uu-file-name))
	    (if view 
		(gnus-uu-view-file file)
	      (gnus-uu-save-file file)))))

    (gnus-uu-summary-next-subject)

    (if (and gnus-uu-use-interactive-view view decoded)
	(gnus-uu-do-interactive))

    (if (or (not gnus-uu-use-interactive-view) (not decoded))
	(gnus-uu-clean-up))))

    
(defun gnus-uu-unshar-and-view-or-save (view marked)
  "Unshars and views/saves marked/unmarked articles."
  (gnus-uu-initialize)
  (let (tar-file files decoded)
    (save-excursion
      (setq gnus-uu-shar-directory 
	    (make-temp-name (concat gnus-uu-tmp-dir "gnusuush")))
      (make-directory gnus-uu-shar-directory)
      (gnus-uu-add-file gnus-uu-shar-directory)
      (if (gnus-uu-decode-and-strip t marked)
	  (progn
	    (setq decoded t)
	    (setq files (directory-files gnus-uu-shar-directory t))
	    (setq gnus-uu-generated-file-list
		  (append files gnus-uu-generated-file-list))
	    (if (> (length files) 3)
		(progn 
		  (setq tar-file 
			(concat
			 (make-temp-name (concat gnus-uu-tmp-dir "gnusuuar"))
			 ".tar"))
		  (gnus-uu-add-file tar-file)
		  (call-process "sh" nil 
				(get-buffer-create gnus-uu-output-buffer-name)
				nil "-c" 
				(format "cd %s ; tar cf %s * ; cd .. ; rm -r %s" 
					gnus-uu-shar-directory 
					tar-file
					gnus-uu-shar-directory))
		  (if view
		      (gnus-uu-view-file tar-file)
		    (gnus-uu-save-file tar-file)))
	      (if view
		  (gnus-uu-view-file (elt files 2))
		(gnus-uu-save-file (elt files 2)))))))

    (gnus-uu-summary-next-subject)

    (if (and gnus-uu-use-interactive-view view decoded)
	(gnus-uu-do-interactive))

    (if (or (not gnus-uu-use-interactive-view) (not decoded))
	(gnus-uu-clean-up))))


(defconst gnus-uu-saved-article-name nil)
(defun gnus-uu-save-articles (view marked)
  (let (list-of-articles)
    (save-excursion
      (if (not marked)
	  (setq list-of-articles (gnus-uu-get-list-of-articles))
	(setq list-of-articles (reverse gnus-uu-marked-article-list))
	(setq gnus-uu-marked-article-list nil))
      (if (not list-of-articles)
	  (progn
	    (message "No list of articles")
	    (sit-for 2))
	(setq gnus-uu-saved-article-name 
	      (concat gnus-uu-tmp-dir 
		      (read-file-name "Enter file name: " gnus-newsgroup-name
				      gnus-newsgroup-name)))
	(gnus-uu-add-file gnus-uu-saved-article-name)
	(if (gnus-uu-grab-articles list-of-articles 'gnus-uu-save-article)
	    (gnus-uu-save-file gnus-uu-saved-article-name))
	))))


(defun gnus-uu-save-article (buffer in-state)
  (save-excursion
    (set-buffer buffer)
    (call-process-region 
     1 (point-max) "sh" nil (get-buffer-create gnus-uu-output-buffer-name)
     nil "-c" (concat "cat >> " gnus-uu-saved-article-name)))
  'ok)


;; Binhex
(defconst gnus-uu-binhex-body-line 
  "^................................................................$")
(defconst gnus-uu-binhex-begin-line 
  "^:...............................................................$")
(defconst gnus-uu-binhex-end-line
  ":$")
(defvar gnus-uu-binhex-article-name nil)


(defun gnus-uu-binhex-and-save (view marked)
  (let (list-of-articles)
    (save-excursion
      (if (not marked)
	  (setq list-of-articles (gnus-uu-get-list-of-articles))
	(setq list-of-articles (reverse gnus-uu-marked-article-list))
	(setq gnus-uu-marked-article-list nil))
'      (setq gn-dummy-l list-of-articles)
      (if (not list-of-articles)
	  (progn
	    (message "No list of articles")
	    (sit-for 2))
	(setq gnus-uu-binhex-article-name 
	      (concat gnus-uu-tmp-dir 
		      (read-file-name "Enter binhex file name: " 
				      gnus-newsgroup-name
				      gnus-newsgroup-name)))
	(gnus-uu-add-file gnus-uu-binhex-article-name)
	(if (gnus-uu-grab-articles list-of-articles 'gnus-uu-binhex-article)
	    (gnus-uu-save-file gnus-uu-binhex-article-name))
	))))


(defun gnus-uu-binhex-article (buffer in-state)
  (let ((state 'ok)
	start-char)
    (save-excursion
      (set-buffer buffer)
      (goto-char 1)
      (if (not (re-search-forward (concat gnus-uu-binhex-begin-line "\\|" 
					  gnus-uu-binhex-body-line) nil t))
	  (setq state 'wrong-type)
	(beginning-of-line)
	(setq start-char (point))
	(if (looking-at gnus-uu-binhex-begin-line)
	    (setq state 'begin)
	  (setq state 'middle))
	(goto-char (point-max))
	(re-search-backward (concat gnus-uu-binhex-body-line "\\|" 
				    gnus-uu-binhex-end-line) nil t)
	(if (looking-at gnus-uu-binhex-end-line)
	    (if (eq state 'begin)
		(setq state 'begin-and-end)
	      (setq state 'end)))
	(beginning-of-line)
	(forward-line 1)
	(append-to-file start-char (point) gnus-uu-binhex-article-name)))
    state))
      

;; Internal view commands

(defun gnus-uu-view-file (file-name &optional dont-ask)
  "This function takes two parameters. The first is name of the file to be 
viewed. gnus-uu-view-file will look for an action associated with the file
type of the file. If it finds an appropriate action, the file will be
attempted displayed.

The second parameter specifies if the user is to be asked whether to
save the file if viewing is unsuccessful. `t' means 'do not ask.'

Note that the file given will be deleted by this function, one way or
another. If `gnus-uu-asynchronous' is set, it won't be deleted right
away, but sometime later. If the user is offered to save the file, it'll
be moved to wherever the user wants it. 

gnus-uu-view-file returns `t' if viewing is successful."
  (let (action did-view
	(didnt-want t)
	(do-view t))
    (setq action 
	  (gnus-uu-choose-action
	   file-name
	   (append 
	    (if (and gnus-uu-use-interactive-view 
		     gnus-uu-user-interactive-view-rules)
		gnus-uu-user-interactive-view-rules
	      gnus-uu-user-view-rules)
	    (if (or gnus-uu-ignore-default-view-rules
		    (not gnus-uu-use-interactive-view))
		()
	      gnus-uu-default-interactive-view-rules-begin)
	    (if gnus-uu-ignore-default-view-rules 
		nil 
	      gnus-uu-default-view-rules)
	    (if (and gnus-uu-use-interactive-view
		     gnus-uu-user-interactive-view-rules-end)
		gnus-uu-user-interactive-view-rules-end
	       gnus-uu-user-view-rules-end))))

	   (if (and gnus-uu-use-interactive-view 
		    (not (string= (or action "") "gnus-uu-archive")))
	       (gnus-uu-enter-interactive-file (or action "") file-name)

	     (if action
		 (if (string= action "gnus-uu-archive") 
		     (setq did-view (gnus-uu-treat-archive file-name))
	  
		   (if gnus-uu-ask-before-view
		       (setq didnt-want 
			     (or (not 
				  (setq do-view
					(y-or-n-p 
					 (format "Do you want to view %s? " 
						 file-name))))
				 didnt-want)))

		   (if do-view
		       (setq did-view 
			     (if gnus-uu-asynchronous
				 (gnus-uu-call-asynchronous file-name action)
			       (gnus-uu-call-synchronous file-name action))))))

	     (if (and (not dont-ask) (not gnus-uu-use-interactive-view))
		 (progn
		   (if (and
			didnt-want
			(or (not action)
			    (and (string= action "gnus-uu-archive") (not did-view))))
		       (progn
			 (message (format "Could find no rule for %s" file-name))
			 (sit-for 2)))
		   (and (or (not did-view) gnus-uu-view-and-save)
			(y-or-n-p 
			 (format "Do you want to save the file %s? " file-name))
			(gnus-uu-save-file file-name))))

	     (if (and (file-exists-p file-name) 
		      (not gnus-uu-use-interactive-view)
		      (or 
		       (not (and gnus-uu-asynchronous did-view))
		       (string= action "gnus-uu-archive")))
		 (delete-file file-name)))

	   did-view))


(defun gnus-uu-call-synchronous (file-name action)
  "Takes two parameters: The name of the file to be displayed and
the command to display it with. Returns `t' on success and `nil' if
the file couldn't be displayed."
  (let (did-view command)
    (save-excursion
      (set-buffer (get-buffer-create gnus-uu-output-buffer-name))
      (erase-buffer)
      (if (string-match "%s" action)
	  (setq command (format action (concat "'" file-name "'")))
	(setq command (concat action " " (concat "'" file-name "'"))))
      (message (format "Viewing with '%s'" command))
      (if (not (= 0 (call-process "sh" nil t nil "-c" command)))
	  (progn
	    (goto-char 1)
	    (while (re-search-forward "\n" nil t)
	      (replace-match " "))
	    (message (concat "Error: " (buffer-substring 1 (point-max))))
	    (sit-for 2))
	(message "")
	(setq did-view t)))
    did-view))


(defun gnus-uu-call-asynchronous (file-name action)
  "Takes two parameters: The name of the file to be displayed and
the command to display it with. Since the view command is executed
asynchronously, it's kinda hard to decide whether the command succeded
or not, so this function always returns `t'. It also adds \"; rm -f 
file-name\" to the end of the execution string, so the file will be 
removed after viewing has ended."
  (let (command file tmp-file start)
    (while (string-match "/" file-name start)
      (setq start (1+ (match-beginning 0))))
    (setq file (substring file-name start))
    (setq tmp-file (concat gnus-uu-tmp-dir file))
    (if (string= tmp-file file-name)
	()
      (rename-file file-name tmp-file t)
      (setq file-name tmp-file))

    (if (string-match "%s" action)
	(setq command (format action file-name))
      (setq command (concat action " " file-name)))
    (setq command (format "%s ; rm -f %s" command file-name))
    (message (format "Viewing with %s" command))
    (start-process "gnus-uu-view" 
		   nil "sh" "-c" command)
    t))


(defun gnus-uu-decode-and-strip (&optional shar use-marked)
  "This function does all the main work. It finds out what articles
to grab, grabs them, strips the result and decodes. If any of 
these operations fail, it returns `nil', `t' otherwise.
If shar is `t', it will pass this on to gnus-uu-grab-articles
who will (probably) unshar the articles. If use-marked
is non-nil, it won't try to find articles, but use the marked list."
  (let (list-of-articles)
    (save-excursion

      (if use-marked
	  (progn (if (eq gnus-uu-marked-article-list ())
		(message "No articles marked")
	      (setq list-of-articles (reverse gnus-uu-marked-article-list))
	      (gnus-uu-unmark-all-articles)))
	(setq list-of-articles (gnus-uu-get-list-of-articles)))
      
      (and list-of-articles
	   (gnus-uu-grab-articles list-of-articles 
				  (if shar 
				      'gnus-uu-unshar-article
				    'gnus-uu-uustrip-article-as))))))


(defun gnus-uu-reginize-string (string)
  "Takes a string and puts a \\ in front of every special character;
ignores any leading \"version numbers\"
thingies that they use in the comp.binaries groups, and either replaces
anything that looks like \"2/3\" with \"[0-9]+/[0-9]+\" or, if it can't find
something like that, replaces the last two numbers with \"[0-9]+\". This,
in my experience, should get most postings of a series." 
  (let ((count 2)
	(vernum "v[0-9][0-9][a-z][0-9]+:")
	reg beg)
    (save-excursion
      (set-buffer (get-buffer-create gnus-uu-output-buffer-name))
      (erase-buffer)
      (insert (regexp-quote string))
      (setq beg 1)

      (setq case-fold-search nil)
      (goto-char 1)
      (if (looking-at vernum)
	  (progn
	    (replace-match vernum t t)
	    (setq beg (length vernum))))

      (goto-char beg)
      (if (re-search-forward "[ \t]*[0-9]+/[0-9]+" nil t)
	  (replace-match " [0-9]+/[0-9]+")

	(goto-char beg)
	(if (re-search-forward "[0-9]+[ \t]*of[ \t]*[0-9]+" nil t)
	    (replace-match "[0-9]+ of [0-9]+")

	  (end-of-line)
	  (while (and (re-search-backward "[0-9]" nil t) (> count 0))
            (while (and 
		    (looking-at "[0-9]") 
		    (< 1 (goto-char (1- (point))))))
            (re-search-forward "[0-9]+" nil t)
	    (replace-match "[0-9]+")
	    (backward-char 5)
	    (setq count (1- count)))))

      (goto-char beg)
      (while (re-search-forward "[ \t]+" nil t)
	(replace-match "[ \t]*" t t))

      (buffer-substring 1 (point-max)))))


(defun gnus-uu-get-list-of-articles (&optional subject mark-articles only-unread)
  "Finds all articles that matches the regular expression given.
Returns the resulting list."
  (let (beg end reg-subject list-of-subjects list-of-numbers art-num)
    (save-excursion
      
; If the subject is not given, this function looks at the current subject
; and takes that.

      (if subject
	  (setq reg-subject subject)
	(end-of-line)
	(setq end (point))
	(beginning-of-line)
	(if (not (re-search-forward "\\] " end t))
	    (progn (message "No valid subject chosen") (sit-for 2))
	  (setq subject (buffer-substring (point) end))
	  (setq reg-subject 
		(concat "\\[.*\\] " (gnus-uu-reginize-string subject)))))

;      (message reg-subject)(sleep-for 2)
      
      (if reg-subject
	  (progn

; Collect all subjects matching reg-subject.

	    (let ((case-fold-search t))
	      (setq case-fold-search t)
	      (goto-char 1)
	      (while (re-search-forward reg-subject nil t)
		(beginning-of-line)
		(setq beg (point))
		(if (or (not only-unread) (looking-at " \\|-"))
		    (progn
		      (end-of-line)
		      (setq list-of-subjects (cons 
					      (buffer-substring beg (point))
					      list-of-subjects)))
		  (end-of-line))))

; Expand all numbers in all the subjects: (hi9 -> hi0009, etc).

	    (setq list-of-subjects (gnus-uu-expand-numbers list-of-subjects))

; Sort the subjects.

	    (setq list-of-subjects (sort list-of-subjects 'gnus-uu-string<))

; Get the article numbers from the sorted list of subjects.

	    (while list-of-subjects 
	      (setq art-num (gnus-uu-article-number (car list-of-subjects)))
	      (if mark-articles (gnus-summary-mark-as-read art-num ?#))
	      (setq list-of-numbers (cons art-num list-of-numbers))
	      (setq list-of-subjects (cdr list-of-subjects)))

	    (setq list-of-numbers (nreverse list-of-numbers))

	    (if (not list-of-numbers)
		(progn 
		  (message (concat "No subjects matched " subject))
		  (sit-for 2)))))

      list-of-numbers)))


(defun gnus-uu-expand-numbers (string-list)
  "Takes a list of strings and \"expands\" all numbers in all the strings.
That is, this function makes all numbers equal length by prepending lots
of zeroes before each number. This is to ease later sorting to find out
what sequence the articles are supposed to be decoded in. Returns the list
of expanded strings."
  (let (string out-list pos num)
    (save-excursion
      (set-buffer (get-buffer-create gnus-uu-output-buffer-name))
      (while string-list
	(erase-buffer)
	(setq string (car string-list))
	(setq string-list (cdr string-list))
	(insert string)
	(goto-char 1)
	(while (re-search-forward "[ \t]+" nil t)
	  (replace-match " "))
	(goto-char 1)
	(while (re-search-forward "[A-Za-z]" nil t)
	  (replace-match "a" t t))

	(goto-char 1)
	(if (not (search-forward "] " nil t))
	    ()
	  (while (re-search-forward "[0-9]+" nil t)
	    (replace-match  
	     (format "%06d" 
		     (string-to-int (buffer-substring 
				     (match-beginning 0) (match-end 0))))))
	  (setq string (buffer-substring 1 (point-max)))
	  (setq out-list (cons string out-list)))))
    out-list))


(defun gnus-uu-string< (string1 string2) 
  "Used in a sort for finding out what string is bigger, but ignoring
everything before the subject part."
  (string< (substring string1 (string-match "\\] " string1))
	   (substring string2 (string-match "\\] " string2))))


;; gnus-uu-grab-article
;;
;; This is the general multi-article treatment function. 
;; It takes a list of articles to be grabbed and a function
;; to apply to each article. It puts the result in 
;; gnus-uu-result-buffer.
;;
;; The function to be called should take two parameters.
;; The first is the buffer that has the article that should
;; be treated. The function should leave the result in this
;; buffer as well. This result is then appended on to the
;; gnus-uu-result-buffer.
;; The second parameter is the state of the list of articles,
;; and can have three values: 'start, 'middle and 'end.
;; The function can have several return values. 
;; 'error if there was an error while treating.
;; 'end if the last article has been sighted.
;; 'begin-and-end if the article is both the beginning and
;;   the end. All these three return values results in 
;;   gnus-uu-grab-articles stopping traversing of the list
;;   of articles.
;; 'middle if the article is a "middle" article.
;; 'ok if everything is ok.

(defvar gnus-uu-has-been-grabbed nil)

(defun gnus-uu-unmark-list-of-grabbed (&optional dont-unmark-last-article)
  (let (art)
    (if (or (not gnus-uu-has-been-grabbed) 
	    (not gnus-uu-unmark-articles-not-decoded))
	()
      (if dont-unmark-last-article
	  (progn
	    (setq art (car gnus-uu-has-been-grabbed))
	    (setq gnus-uu-has-been-grabbed (cdr gnus-uu-has-been-grabbed))))
      (while gnus-uu-has-been-grabbed
	(gnus-summary-mark-as-unread (car gnus-uu-has-been-grabbed) t)
	(setq gnus-uu-has-been-grabbed (cdr gnus-uu-has-been-grabbed)))
      (if dont-unmark-last-article
	  (setq gnus-uu-has-been-grabbed (list art)))
      )))


(defun gnus-uu-grab-articles (list-of-articles process-function)
  "This function takes a list of articles and a function to apply 
to each article grabbed. The result of the function is appended
on to gnus-uu-result-buffer. 

This function returns `t' if the grabbing and the process-function
has been successful and `nil' otherwise."
  (let ((result-buffer (get-buffer-create gnus-uu-result-buffer))
	(state 'first)
	(process-state 'ok)
	(result t)
	(wrong-type t)
	(has-been-begin nil)
	(article nil))

    (save-excursion
      (set-buffer result-buffer)
      (erase-buffer))
    (setq gnus-uu-has-been-grabbed nil)
    (while (and list-of-articles 
		(not (eq process-state 'end))
		(not (eq process-state 'begin-and-end))
		(not (eq process-state 'error)))
      (setq article (car list-of-articles))
      (setq list-of-articles (cdr list-of-articles))
      (setq gnus-uu-has-been-grabbed (cons article gnus-uu-has-been-grabbed))

      (if (eq list-of-articles ()) (setq state 'last))

      (message (format "Getting article %d" article))
      (if (not (= (or gnus-current-article 0) article))
	  (gnus-summary-display-article article))
      (gnus-summary-mark-as-read article)

      (save-excursion 
	(set-buffer gnus-article-buffer)
	(widen))

      (setq process-state (funcall process-function gnus-article-buffer state))

      (if (or (eq process-state 'begin) (eq process-state 'begin-and-end)
	      (eq process-state 'ok))
	  (setq has-been-begin t))

      (if (not (eq process-state 'wrong-type))
	  (setq wrong-type nil)
	(if gnus-uu-unmark-articles-not-decoded
	    (gnus-summary-mark-as-unread article t)))

      (if gnus-uu-do-sloppy-uudecode
	  (setq wrong-type nil))

      (if (and (not has-been-begin)
	       (not gnus-uu-do-sloppy-uudecode)
	       (or (eq process-state 'end)
		   (eq process-state 'middle)))
	  (progn
	    (setq process-state 'error)
	    (message "No begin part at the beginning")
	    (sit-for 2))
	(setq state 'middle)))

    (if (and (not has-been-begin) (not gnus-uu-do-sloppy-uudecode))
	(progn
	  (setq result nil)
	  (message "Wrong type file")
	  (sit-for 2))
      (if (eq process-state 'error)
	  (setq result nil)
	(if (not (or (eq process-state 'ok) 
		     (eq process-state 'end)
		     (eq process-state 'begin-and-end)))
	    (progn
	      (if (not gnus-uu-do-sloppy-uudecode)
		  (progn
		    (message "End of articles reached before end of file")
		    (sit-for 2)))
	      (gnus-uu-unmark-list-of-grabbed)
	      (setq result nil)))))
    (setq gnus-uu-rest-of-articles list-of-articles)
    result))


(defun gnus-uu-uudecode-sentinel (process event)
;  (message "Process '%s' has received event '%s'" process event)
;  (sit-for 2)
  (delete-process (get-process process)))


(defun gnus-uu-uustrip-article-as (process-buffer in-state)
  (let ((state 'ok)
	(process-connection-type nil)
	start-char pst name-beg name-end buf-state)
    (save-excursion
      (set-buffer process-buffer)
      (setq buf-state buffer-read-only)
      (setq buffer-read-only nil)

      (goto-char 1)

      (if gnus-uu-kill-carriage-return
	  (progn
	    (while (search-forward "
" nil t)
	      (delete-backward-char 1))
	    (goto-char 1)))

      (if (not (re-search-forward 
		(concat gnus-uu-begin-string "\\|" gnus-uu-body-line) nil t))
	    (setq state 'wrong-type)
     
	(beginning-of-line)
	(setq start-char (point))

	(if (looking-at gnus-uu-begin-string)
	    (progn 
	      (setq name-end (match-end 1))
	      (goto-char (setq name-beg (match-beginning 1)))
	      (while (re-search-forward "/" name-end t)
		(replace-match "-"))
	      (setq gnus-uu-file-name (buffer-substring name-beg name-end))
	      (setq pst (process-status 
			 (or gnus-uu-uudecode-process "nevair")))
	      (if (or (eq pst 'stop) (eq pst 'run))
		  (progn
		    (delete-process gnus-uu-uudecode-process)
		    (gnus-uu-unmark-list-of-grabbed t)))
	      (setq gnus-uu-uudecode-process
		    (start-process 
		     "*uudecode*" 
		     (get-buffer-create gnus-uu-output-buffer-name)
		     "sh" "-c" 
		     (format "cd %s ; uudecode" gnus-uu-tmp-dir)))
	      (set-process-sentinel 
	       gnus-uu-uudecode-process 'gnus-uu-uudecode-sentinel)
	      (setq state 'begin)
	      (gnus-uu-add-file (concat gnus-uu-tmp-dir gnus-uu-file-name)))
	  (setq state 'middle))
	
	(goto-char (point-max))
	(re-search-backward 
	 (concat gnus-uu-body-line "\\|" gnus-uu-end-string) nil t)
	(if (looking-at gnus-uu-end-string)
	    (if (eq state 'begin)
		(setq state 'begin-and-end)
	      (setq state 'end)))
	(forward-line 1)

	(setq pst (process-status (or gnus-uu-uudecode-process "nevair")))
	(if (or (eq pst 'run) (eq pst 'stop))
	    (progn
	      (gnus-uu-check-correct-stripped-uucode start-char (point))
	      (condition-case err
		  (process-send-region gnus-uu-uudecode-process start-char 
				       (point))
		(error 
		 (progn 
		   (setq state 'wrong-type)
		   (delete-process gnus-uu-uudecode-process)))))
	  (setq state 'wrong-type)))
      (setq buffer-read-only buf-state))
    state))


(defun gnus-uu-unshar-article (process-buffer in-state)
  "This function is used by gnus-uu-grab-articles to treat
a shared article."
  (let ((state 'ok)
	start-char)
    (save-excursion
     (set-buffer process-buffer)
     (goto-char 1)
     (if (not (re-search-forward gnus-uu-shar-begin-string nil t))
	 (setq state 'wrong-type)
       (beginning-of-line)
       (setq start-char (point))
       (call-process-region 
	start-char (point-max) "sh" nil 
	(get-buffer-create gnus-uu-output-buffer-name) nil 
	"-c" (concat "cd " gnus-uu-shar-directory " ; sh"))))
    state))


(defun gnus-uu-find-name-in-shar ()
  "Returns the name of what the shar file is going to unpack."
  (let ((oldpoint (point))
	res)
    (goto-char 1)
    (if (re-search-forward gnus-uu-shar-name-marker nil t)
	(setq res (buffer-substring (match-beginning 1) (match-end 1))))
    (goto-char oldpoint)
    res))
      

(defun gnus-uu-article-number (subject)
  "Returns the article number of the given subject."
  (let (end)
    (string-match "[0-9]+[^0-9]" subject 1)
    (setq end (match-end 0))
    (string-to-int 
     (substring subject (string-match "[0-9]" subject 1) end)))) 
	      

(defun gnus-uu-decode (directory)
  "UUdecodes everything in the buffer and returns the name of the resulting
file."
  (let ((command (concat "cd " directory " ; uudecode"))
	file-name)
    (save-excursion
      (message "Uudecoding...")
      (set-buffer (get-buffer-create gnus-uu-result-buffer))
      (setq file-name (concat gnus-uu-tmp-dir gnus-uu-file-name))
      (gnus-uu-add-file file-name)
      (call-process-region 1 (point-max) "sh" nil t nil "-c" command)
      file-name)))


(defun gnus-uu-choose-action (file-name file-action-list)
  "Chooses what action to perform given the name and gnus-uu-file-action-list.
Returns either nil if no action is found, or the name of the command
to run if such a rule is found."
  (let ((action-list (copy-sequence file-action-list))
	rule action)
    (while (not (or (eq action-list ()) action))
      (setq rule (car action-list))
      (setq action-list (cdr action-list))
      (if (string-match (car rule) file-name)
	  (setq action (car (cdr rule)))))
    action))


(defun gnus-uu-save-file (from-file-name &optional default-dir ignore-existing)
  "Moves the file from the tmp directory to where the user wants it."
  (let (dir file-name command)
    (string-match "/[^/]*$" from-file-name)
    (setq file-name (substring from-file-name (1+ (match-beginning 0))))
    (if default-dir
	(setq dir default-dir)
      (setq dir (gnus-uu-read-directory "Where do you want the file? ")))
    (if (and (not ignore-existing) (file-exists-p (concat dir file-name)))
	(progn
	  (message (concat "There already is a file called " file-name))
	  (sit-for 2)
	  (setq file-name
		(read-file-name "Give a new name: " dir (concat dir file-name)
			    nil file-name)))
      (setq file-name (concat dir file-name)))
    (rename-file from-file-name file-name t)))
    

(defun gnus-uu-read-directory (prompt &optional default)
  (let (dir ok create)
    (while (not ok)
      (setq ok t)
      (setq dir (if default default
		  (read-file-name prompt gnus-uu-current-save-dir 
				  gnus-uu-current-save-dir)))
      (while (string-match "/$" dir)
	(setq dir (substring dir 0 (match-beginning 0))))
      (if (file-exists-p dir)
	  (if (not (file-directory-p dir))
	      (progn
		(setq ok nil)
		(message "%s is a file" dir)
		(sit-for 2)))
	(setq create ?o)
	(while (not (or (= create ?y) (= create ?n)))
	  (message "%s: No such directory. Do you want to create it? (y/n)" 
		   dir)
	  (setq create (read-char)))
	(if (= create ?y) (make-directory dir))))
    (setq gnus-uu-current-save-dir (concat dir "/"))))


(defun gnus-uu-treat-archive (file-name)
  "Unpacks an archive and views all the files in it. Returns `t' if
viewing one or more files is successful."
  (let ((arc-dir (make-temp-name 
		  (concat gnus-uu-tmp-dir "gnusuu")))
	action command files file did-view short-file-name
	error-during-unarching)
    (setq action (gnus-uu-choose-action 
		  file-name (append gnus-uu-user-archive-rules
				    (if gnus-uu-ignore-default-archive-rules
					nil
				      gnus-uu-default-archive-rules))))
    (if (not action)
	(progn (message (format "No unpackers for the file %s" file-name))
	       (sit-for 2))
      (string-match "/[^/]*$" file-name)
      (setq short-file-name (substring file-name (1+ (match-beginning 0))))
      (setq command (format "%s %s %s ; cd %s ; %s %s " 
			    (if (or (string= action "uncompress")
				    (string= action "gunzip"))
				"cp"
			      "mv")
			    file-name arc-dir 
			    arc-dir 
			    action short-file-name))

      (make-directory arc-dir)
      (gnus-uu-add-file arc-dir)

      (save-excursion
	(set-buffer (get-buffer-create gnus-uu-output-buffer-name))
	(erase-buffer))

      (message (format "Unpacking with %s..." action))

      (if (= 0 (call-process "sh" nil 
			     (get-buffer-create gnus-uu-output-buffer-name)
			     nil "-c" command))
	  (message "")
	(message "Error during unpacking of archive")
	(sit-for 2)
	(sit-for 2)
	(setq error-during-unarching t))

      (if (not (or (string= action "uncompress")
		   (string= action "gunzip")))
	  (call-process "sh" nil (get-buffer gnus-uu-output-buffer-name)
			nil "-c" (format "mv %s/%s %s" 
					 arc-dir short-file-name
					 gnus-uu-tmp-dir)))
      (gnus-uu-add-file (concat gnus-uu-tmp-dir short-file-name))
    
      (setq did-view 
	    (or (gnus-uu-show-directory arc-dir gnus-uu-use-interactive-view) 
		did-view))

      (if (and (not gnus-uu-use-interactive-view) 
	       (file-directory-p arc-dir))
	  (delete-directory arc-dir)))

    did-view))


(defun gnus-uu-show-directory (dir &optional dont-delete-files)
  "Tries to view all the files in the given directory. Returns `t' if
viewing one or more files is successful."
  (let (files file did-view)
    (setq files (directory-files dir t))
    (setq gnus-uu-generated-file-list
	  (append files gnus-uu-generated-file-list))
    (while files
      (setq file (car files))
      (setq files (cdr files))
      (if (and (not (string-match "/\\.$" file)) 
	       (not (string-match "/\\.\\.$" file)))
	  (progn
	    (set-file-modes file 448)
	    (if (file-directory-p file)
		(setq did-view (or (gnus-uu-show-directory file 
							   dont-delete-files) 
				   did-view))
	      (setq did-view (or (gnus-uu-view-file file t) did-view))
	      (if (and (not dont-delete-files) (file-exists-p file)) 
		       (delete-file file))))))
    (if (not dont-delete-files) (delete-directory dir))
    did-view))


;; Manual marking

(defun gnus-uu-enter-mark-in-list ()
  (let (article	beg)
    (beginning-of-line)
    (setq beg (point))
    (end-of-line)
    (setq article (gnus-uu-article-number 
		   (buffer-substring beg (point))))
    (message (format "Adding article %d to list" article))
    (setq gnus-uu-marked-article-list 
	  (cons article gnus-uu-marked-article-list)))) 

(defun gnus-uu-mark-article ()
  "Marks the current article to be decoded later."
  (interactive)
  (gnus-uu-enter-mark-in-list)
  (gnus-summary-mark-as-read nil ?#)
  (gnus-summary-next-subject 1 nil))

(defun gnus-uu-unmark-article ()
  "Unmarks the current article."
  (interactive)
  (let ((in (copy-sequence gnus-uu-marked-article-list))
	out article beg found
	(old-point (point)))
    (beginning-of-line)
      (setq beg (point))
      (end-of-line)
      (setq article (gnus-uu-article-number (buffer-substring beg (point))))
      (message (format "Removing article %d" article))
      (while in 
	(if (not (= (car in) article))
	    (setq out (cons (car in) out))
	  (setq found t)
	  (message (format "Removing article %d" article)))
	(setq in (cdr in)))
      (if (not found) (message "Not a marked article."))
      (setq gnus-uu-marked-article-list (reverse out))
      (gnus-summary-mark-as-unread nil t)
      (gnus-summary-next-subject 1 nil)))
	

(defun gnus-uu-unmark-all-articles ()
  "Removes the mark from all articles marked for decoding."
  (interactive)
  (let ((articles (copy-sequence gnus-uu-marked-article-list)))
    (while articles
      (gnus-summary-goto-subject (car articles))
      (gnus-summary-mark-as-unread nil t)
      (setq articles (cdr articles)))
    (setq gnus-uu-marked-article-list ())))

(defun gnus-uu-mark-by-regexp ()
  "Asks for a regular expression and marks all articles that match for later decoding."
  (interactive)
  (let (exp)
    (setq exp (read-from-minibuffer "Enter regular expression: "))
    (setq gnus-uu-marked-article-list 
	  (reverse (gnus-uu-get-list-of-articles exp t)))
    (message "")))
      

;; Various

(defun gnus-uu-check-correct-stripped-uucode (start end)
  (let (found beg length short)
    (if (not gnus-uu-correct-stripped-uucode)
	()
      (goto-char start)
      (while (< (point) end)
	(if (looking-at (concat gnus-uu-begin-string "\\|" gnus-uu-end-string))
	    ()
	  (if (not found)
	      (progn
		(beginning-of-line)
		(setq beg (point))
		(end-of-line)
		(setq length (- (point) beg))))
	  (beginning-of-line)
	  (setq beg (point))
	  (end-of-line)
	  (if (not (= length (- (point) beg)))
	      (insert (make-string (- length (- (point) beg))) ? )))
	(forward-line 1)))))

(defun gnus-uu-initialize ()
  (if (not gnus-uu-use-interactive-view)
      ()
    (save-excursion
      (setq gnus-uu-interactive-file-list nil)
      (set-buffer (get-buffer-create gnus-uu-interactive-buffer-name))
      (erase-buffer)
      (gnus-uu-mode)
      (insert 
       "# Press return to execute a command.
# Press `C-c C-c' to exit interactive view.

"))))


(defun gnus-uu-clean-up ()
  "Kills the temporary uu buffers."
  (let (buf pst)
    (setq gnus-uu-do-sloppy-uudecode nil)
    (setq pst (process-status (or gnus-uu-uudecode-process "nevair")))
    (if (or (eq pst 'stop) (eq pst 'run))
	(delete-process gnus-uu-uudecode-process))
    (and (not gnus-uu-asynchronous) 
	 (setq buf (get-buffer gnus-uu-output-buffer-name))
	 (kill-buffer buf))
    (and (setq buf (get-buffer gnus-uu-result-buffer))
	 (kill-buffer buf))))


(defun gnus-uu-check-for-generated-files ()
  "Deletes any generated files that hasn't been deleted, if, for
instance, the user terminated decoding with `C-g'."
  (let (file)
    (while gnus-uu-generated-file-list
      (setq file (car gnus-uu-generated-file-list))
      (setq gnus-uu-generated-file-list (cdr gnus-uu-generated-file-list))
      (if (not (string-match "/\\.[\\.]?$" file))
	  (progn
	    (if (file-directory-p file)
		(delete-directory file)
	      (if (file-exists-p file)
		  (delete-file file))))))))


(defun gnus-uu-add-file (file)
  (setq gnus-uu-generated-file-list 
	(cons file gnus-uu-generated-file-list)))

(defun gnus-uu-summary-next-subject ()
  (if (not (gnus-summary-search-forward t))
      (progn
	(goto-char 1)
	(sit-for 0)
	(goto-char (point-max))
	(forward-line -1)
	(beginning-of-line)
	(search-forward ":" nil t)))
  (sit-for 0)
  (gnus-summary-recenter))


;; Initializing

(add-hook 'gnus-exit-group-hook
      '(lambda ()
	 (gnus-uu-clean-up)
	 (setq gnus-uu-marked-article-list nil)
	 (gnus-uu-check-for-generated-files)))


;; Interactive exec mode

(defvar gnus-uu-output-window nil)
(defvar gnus-uu-mode-hook nil)
(defvar gnus-uu-mode-map nil)

(defun gnus-uu-do-interactive ()
  (let (int-buffer out-buf)
    (set-buffer 
     (setq int-buffer (get-buffer gnus-uu-interactive-buffer-name)))
    (switch-to-buffer-other-window int-buffer)
    (pop-to-buffer int-buffer)
    (setq gnus-uu-output-window 
	  (split-window nil (- (window-height) gnus-uu-output-window-height)))
    (set-window-buffer gnus-uu-output-window
		       (setq out-buf 
			     (get-buffer-create gnus-uu-output-buffer-name)))
    (save-excursion (set-buffer out-buf) (erase-buffer))
    (goto-char 1)
    (forward-line 3)
    (run-hooks 'gnus-uu-mode-hook)))


(defun gnus-uu-enter-interactive-file (action file)
  (let (command)
    (save-excursion
      (setq gnus-uu-interactive-file-list
	    (cons file gnus-uu-interactive-file-list))
      (set-buffer (get-buffer gnus-uu-interactive-buffer-name))
      (if (string-match "%s" action)
	  (setq command (format action (concat "'" file "'")))
	(setq command (concat action " " (concat "'" file "'"))))

      (insert (format "%s\n" command)))))


(defun gnus-uu-interactive-execute ()
  (interactive)
  (let (beg out-buf command)
    (beginning-of-line)
    (setq beg (point))
    (end-of-line)
    (setq command (buffer-substring beg (point)))
    (setq out-buf (get-buffer-create gnus-uu-output-buffer-name))
    (save-excursion
      (set-buffer out-buf)
      (erase-buffer)
      (insert (format "$ %s \n\n" command)))
    (message "Executing...")
    (if gnus-uu-asynchronous
	(start-process "gnus-uu-view" out-buf "sh" "-c" command)
      (call-process "sh" nil out-buf nil "-c" command)
      (message ""))
    (forward-line 1)
    (beginning-of-line)))


(defun gnus-uu-interactive-end ()
  "This function ends interactive view mode and returns to summary mode."
  (interactive)
  (let (buf)
    (delete-window gnus-uu-output-window)
    (gnus-uu-clean-up)
    (if (not gnus-uu-asynchronous) (gnus-uu-check-for-generated-files))
    (setq buf (get-buffer gnus-uu-interactive-buffer-name))
    (if gnus-article-buffer (switch-to-buffer gnus-article-buffer))
    (if buf (kill-buffer buf))
    (pop-to-buffer gnus-summary-buffer)))


(if gnus-uu-mode-map
    ()
  (setq gnus-uu-mode-map (make-sparse-keymap))
  (define-key gnus-uu-mode-map "\C-c\C-x" 'gnus-uu-interactive-execute)
  (define-key gnus-uu-mode-map "\C-c\C-v" 'gnus-uu-interactive-execute)
  (define-key gnus-uu-mode-map "\C-m" 'gnus-uu-interactive-execute)
  (define-key gnus-uu-mode-map "\C-c\C-c" 'gnus-uu-interactive-end)
  (define-key gnus-uu-mode-map "\C-cs" 
    'gnus-uu-interactive-save-current-file)
  (define-key gnus-uu-mode-map "\C-c\C-s"
    'gnus-uu-interactive-save-current-file-silent)
  (define-key gnus-uu-mode-map "\C-c\C-w" 'gnus-uu-interactive-save-all-files)
  (define-key gnus-uu-mode-map "\C-c\C-o" 'gnus-uu-interactive-save-original-file))


(defun gnus-uu-interactive-save-original-file ()
  (interactive)
  (let (file)
    (if (file-exists-p 
	 (setq file (concat gnus-uu-tmp-dir
			    (or gnus-uu-file-name gnus-uu-shar-file-name))))
	(gnus-uu-save-file file)
      (message "Already saved."))))


(defun gnus-uu-interactive-save-current-file-silent ()
  "hei"
  (interactive)
  (gnus-uu-interactive-save-current-file t))

(defun gnus-uu-interactive-save-current-file (&optional dont-ask silent)
  "Saves the file referred to on the current line."
  (interactive)
  (let (files beg line file)
    (setq files (copy-sequence gnus-uu-interactive-file-list))
    (beginning-of-line)
    (setq beg (point))
    (end-of-line)
    (setq line (buffer-substring beg (point)))
    (while (and files
		(not (string-match 
		      (concat "" (regexp-quote (setq file (car files))) "")
		      line)))
      (setq files (cdr files)))
    (beginning-of-line)
    (forward-line 1)
    (if (not files)
	(if (not silent)
	    (progn (message "Could not find file") (sit-for 2)))
      (gnus-uu-save-file file (if dont-ask gnus-uu-current-save-dir nil) silent)
      (delete-region beg (point)))))


(defun gnus-uu-interactive-save-all-files ()
  "Saves all files referred to on the current line."
  (interactive)
  (let (dir)
    (goto-char 1)
    (setq dir (gnus-uu-read-directory "Where do you want the files? "))
    (while (not (eobp))
      (gnus-uu-interactive-save-current-file t t))))

(defun gnus-uu-mode ()
  "Major mode for editing view commands in gnus-uu.


Commands:
Return, C-c C-v, C-c C-x        Execute the current command
C-c C-c                         End interactive mode
C-c s                           Save the current file
C-c C-s                         Save the current file without asking 
                                where to put it
C-c C-a                         Save all files
C-c C-o                         Save the original file: If the files
                                originated in an archive, the archive 
                                file is saved.
"
  (interactive)
  (kill-all-local-variables)
  (use-local-map gnus-uu-mode-map)   
  (setq mode-name "gnus-uu")         
  (setq major-mode 'gnus-uu-mode)    
)

  (define-key gnus-uu-mode-map "\C-c\C-x" 'gnus-uu-interactive-execute)
  (define-key gnus-uu-mode-map "\C-c\C-v" 'gnus-uu-interactive-execute)
  (define-key gnus-uu-mode-map "\C-m" 'gnus-uu-interactive-execute)
  (define-key gnus-uu-mode-map "\C-c\C-c" 'gnus-uu-interactive-end)
  (define-key gnus-uu-mode-map "\C-cs" 
    'gnus-uu-interactive-save-current-file)
  (define-key gnus-uu-mode-map "\C-c\C-s"
    'gnus-uu-interactive-save-current-file-silent)
  (define-key gnus-uu-mode-map "\C-c\C-a" 'gnus-uu-interactive-save-all-files)
  (define-key gnus-uu-mode-map "\C-c\C-o" 'gnus-uu-interactive-save-original-file)

(provide 'gnus-uu)

;; gnus-uu.el ends here