view lib-src/Makefile.in @ 8825:5e5f6d06fb5b

(FLOAT_TO_INT, FLOAT_TO_INT2): Use EMACS_INT.

# Makefile for lib-src subdirectory in GNU Emacs.
# Copyright (C) 1985, 1987, 1988, 1993, 1994 Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# GNU Emacs is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with GNU Emacs; see the file COPYING.  If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */

# Avoid trouble on systems where the `SHELL' variable might be
# inherited from the environment.
SHELL = /bin/sh

# ==================== Things `configure' will edit ====================

CC=@CC@
CFLAGS=@CFLAGS@
ALLOCA=@ALLOCA@
YACC=@YACC@
version=@version@
configuration=@configuration@

# ==================== Where To Install Things ====================

# The default location for installation.  Everything is placed in
# subdirectories of this directory.  The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them.  This is set with the --prefix option to
# `../configure'.
prefix=@prefix@

# Like `prefix', but used for architecture-specific files.  This is
# set with the --exec-prefix option to `../configure'.
exec_prefix=@exec_prefix@

# Where to install Emacs and other binaries that people will want to
# run directly (like etags).  This is set with the --bindir option
# to `../configure'.
bindir=@bindir@

# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data.  ${archlibdir} is usually below this.  This is set with the
# --libdir option to `../configure'.
libdir=@libdir@

# Where to find the source code.  This is set by the configure
# script's `--srcdir' option.  However, the value of ${srcdir} in
# this makefile is not identical to what was specified with --srcdir,
# since the variable here has `/lib-src' added at the end.
srcdir=@srcdir@
VPATH=@srcdir@

# ==================== Emacs-specific directories ====================

# These variables hold the values Emacs will actually use.  They are
# based on the values of the standard Make variables above.

# Where to put executables to be run by Emacs rather than the user.
# This path usually includes the Emacs version and configuration name,
# so that multiple configurations for multiple versions of Emacs may
# be installed at once.  This can be set with the --archlibdir option
# to `../configure'.
archlibdir=@archlibdir@

# ==================== Utility Programs for the Build =================

# ../configure figures out the correct values for these.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

# ========================== Lists of Files ===========================

# Things that a user might actually run,
# which should be installed in bindir.
INSTALLABLES = etags ctags emacsclient b2m
INSTALLABLE_SCRIPTS = rcs-checkin

# Things that Emacs runs internally, or during the build process,
#  which should not be installed in bindir.
UTILITIES= test-distrib make-path wakeup profile make-docfile digest-doc \
	sorted-doc movemail cvtmail fakemail yow emacsserver hexl timer

# Like UTILITIES, but they're not system-dependent, and should not be
#  deleted by the distclean target.
SCRIPTS= rcs2log vcdiff

EXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS}

SOURCES = COPYING ChangeLog Makefile.in README aixcc.lex emacs.csh \
	makedoc.com *.[chy] rcs2log vcdiff

# ========================== start of cpp stuff =======================
/* From here on, comments must be done in C syntax.  */

#define NO_SHORTNAMES
#define THIS_IS_YMAKEFILE
#define NOT_C_CODE
#include "../src/config.h"

/* We won't really call alloca;
   don't let the file name alloca.c get messed up.  */
#ifdef alloca
#undef alloca
#endif

/* Some s/*.h files define this to request special libraries.  */
#ifndef LIBS_SYSTEM
#define LIBS_SYSTEM
#endif

/* Some m/*.h files define this to request special libraries.  */
#ifndef LIBS_MACHINE
#define LIBS_MACHINE
#endif

#ifndef C_SWITCH_SYSTEM
#define C_SWITCH_SYSTEM
#endif

#ifndef C_SWITCH_MACHINE
#define C_SWITCH_MACHINE
#endif

#undef MOVEMAIL_NEEDS_BLESSING
#ifndef MAIL_USE_FLOCK
#ifndef MAIL_USE_LOCKF
#define MOVEMAIL_NEEDS_BLESSING
#endif
#endif

#ifdef MOVEMAIL_NEEDS_BLESSING
#define BLESSMAIL blessmail
#else
#define BLESSMAIL
#endif

LOADLIBES=LIBS_SYSTEM LIBS_MACHINE

/* We need to #define emacs to get the right versions of some files.
   Some other files - those shared with other GNU utilities - need
   HAVE_CONFIG_H #defined before they know they can take advantage of
   the information in ../src/config.h.  */
ALL_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -Demacs -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${LDFLAGS} ${CPPFLAGS} ${CFLAGS}
LINK_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -Demacs -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${LDFLAGS} ${CFLAGS}
CPP_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -Demacs -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS}
ALLOCA_CFLAGS = C_SWITCH_SYSTEM C_SWITCH_MACHINE -DHAVE_CONFIG_H \
   -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS}

/* This is the default compilation command.
   But we should never rely on it, because some make version
   failed to find it for getopt.o.
   Using an explicit command made it work.  */
.c.o:
	${CC} -c ${CPP_CFLAGS} $<

all: ${UTILITIES} ${INSTALLABLES}

#ifdef MOVEMAIL_NEEDS_BLESSING
blessmail:
	../src/emacs -batch -l ../lisp/blessmail.el
	chmod +x blessmail
#endif

maybe-blessmail: BLESSMAIL
#ifdef MOVEMAIL_NEEDS_BLESSING
/* Don't charge ahead and do it!  Let the installer decide.
	  ./blessmail ${archlibdir}/movemail  */
	@if [ `wc -l <blessmail` != 2 ] ; then \
	  dir=`sed -n -e 's/echo mail directory = \(.*\)/\1/p' blessmail`; \
	  echo Assuming $$dir is really the mail spool directory, you should; \
	  echo run  lib-src/blessmail ${archlibdir}/movemail; \
	  echo as root, to give  movemail  appropriate permissions.; \
	  echo Do that after running  make install.; \
	fi
#endif

/* Install the internal utilities.  Until they are installed, we can
   just run them directly from lib-src.  */
${archlibdir}: all
	@echo
	@echo "Installing utilities run internally by Emacs."
	./make-path ${archlibdir}
	if [ `(cd ${archlibdir} && /bin/pwd)` != `/bin/pwd` ]; then \
	  for file in ${UTILITIES}; do \
	    (cd ..; $(INSTALL_PROGRAM) lib-src/$$file ${archlibdir}/$$file) ; \
	  done ; \
        fi
        if [ `(cd ${archlibdir} && /bin/pwd)` \
             != `(cd ${srcdir} && /bin/pwd)` ]; then \
	  for file in ${SCRIPTS}; do \
	    (cd ..; $(INSTALL_PROGRAM) ${srcdir}/$$file ${archlibdir}/$$file); \
	  done ; \
	fi

/* We don't need to install `wakeup' explicitly, because it will be
   copied when this whole directory is copied.  */
install: ${archlibdir}
	@echo
	@echo "Installing utilities for users to run."
	for file in ${INSTALLABLES} ; do \
	  (cd ..; $(INSTALL_PROGRAM) lib-src/$${file} ${bindir}/$${file}) ; \
	done
	for file in ${INSTALLABLE_SCRIPTS} ; do \
	  (cd ..; $(INSTALL_PROGRAM) ${srcdir}/$${file} ${bindir}/$${file}) ; \
	done

uninstall:
	(cd ${bindir}; \
	 rm -f ${INSTALLABLES} ${INSTALLABLE_SCRIPTS})
	(cd ${archlibdir}; \
	 rm -f ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS})

mostlyclean:
	-rm -f core *.o

clean: mostlyclean
	-rm -f ${INSTALLABLES} ${UTILITIES}

distclean: clean
	-rm -f ../etc/DOC* *.tab.c *.tab.h aixcc.c TAGS
	-rm -f Makefile Makefile.in blessmail

realclean: distclean
	true

extraclean: realclean
	-rm -f *~ \#*

unlock:
	chmod u+w $(SOURCES)

relock:
	chmod u-w $(SOURCES)

/* Test the contents of the directory.  */
check:
	@echo "We don't have any tests for GNU Emacs yet."

TAGS: etags
	etags *.[ch]

/* This verifies that the non-ASCII characters in the file `testfile'
   have not been clobbered by whatever means were used to copy and
   distribute Emacs.  If they were clobbered, all the .elc files were
   clobbered too.  */
test-distrib: ${srcdir}/test-distrib.c
	$(CC) ${ALL_CFLAGS} -o test-distrib ${srcdir}/test-distrib.c
	./test-distrib ${srcdir}/testfile

GETOPTOBJS = getopt.o getopt1.o $(ALLOCA)
GETOPTDEPS = $(GETOPTOBJS) ${srcdir}/getopt.h
getopt.o: ${srcdir}/getopt.c ${srcdir}/getopt.h
	${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt.c
getopt1.o: ${srcdir}/getopt1.c ${srcdir}/getopt.h
	${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt1.c
alloca.o: ${srcdir}/alloca.c
	${CC} -c ${ALLOCA_CFLAGS} ${srcdir}/alloca.c

etags: ${srcdir}/etags.c $(GETOPTDEPS) ../src/config.h
	$(CC) ${ALL_CFLAGS} -DVERSION="\"${version}\"" ${srcdir}/etags.c $(GETOPTOBJS) $(LOADLIBES) -o etags

/* We depend on etags to assure that parallel makes don't write two
   etags.o files on top of each other.  */
ctags: ${srcdir}/etags.c $(GETOPTDEPS) etags
	$(CC) ${ALL_CFLAGS} -DCTAGS -DVERSION="\"${version}\"" ${srcdir}/etags.c $(GETOPTOBJS) $(LOADLIBES) -o ctags

wakeup: ${srcdir}/wakeup.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/wakeup.c $(LOADLIBES) -o wakeup

profile: ${srcdir}/profile.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/profile.c $(LOADLIBES) -o profile

make-docfile: ${srcdir}/make-docfile.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/make-docfile.c $(LOADLIBES) -o make-docfile

digest-doc: ${srcdir}/digest-doc.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/digest-doc.c $(LOADLIBES) -o digest-doc 

sorted-doc: ${srcdir}/sorted-doc.c ${ALLOCA}
	$(CC) ${ALL_CFLAGS} ${srcdir}/sorted-doc.c ${ALLOCA} $(LOADLIBES) -o sorted-doc

b2m: ${srcdir}/b2m.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/b2m.c $(LOADLIBES) -o b2m 

movemail: ${srcdir}/movemail.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/movemail.c $(LOADLIBES) -o movemail

cvtmail: ${srcdir}/cvtmail.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/cvtmail.c $(LOADLIBES) -o cvtmail

fakemail: ${srcdir}/fakemail.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/fakemail.c $(LOADLIBES) -o fakemail

yow: ${srcdir}/yow.c ../src/paths.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/yow.c $(LOADLIBES) -o yow

emacsserver: ${srcdir}/emacsserver.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/emacsserver.c $(LOADLIBES) -o emacsserver

emacsclient: ${srcdir}/emacsclient.c ../src/config.h
	$(CC) ${ALL_CFLAGS} ${srcdir}/emacsclient.c $(LOADLIBES) -o emacsclient

hexl: ${srcdir}/hexl.c
	$(CC) ${ALL_CFLAGS} ${srcdir}/hexl.c $(LOADLIBES) -o hexl

TIMEROBJS=getdate.o timer.o $(ALLOCA)
getdate.o: ${srcdir}/getdate.y ../src/config.h
	${YACC} ${YFLAGS} ${srcdir}/getdate.y
	$(CC) $(CPP_CFLAGS) -c y.tab.c
	mv y.tab.o getdate.o
timer.o: ${srcdir}/timer.c ../src/config.h
	$(CC) -c $(CPP_CFLAGS) ${srcdir}/timer.c
timer: ${TIMEROBJS}
	$(CC) $(LINK_CFLAGS) ${TIMEROBJS} $(LOADLIBES) -o timer

make-path: ${srcdir}/make-path.c ../src/config.h
	$(CC) $(ALL_CFLAGS) ${srcdir}/make-path.c -o make-path

/* These are NOT included in INSTALLABLES or UTILITIES.
   See ../src/Makefile.in.in.  */
emacstool: ${srcdir}/emacstool.c
	$(CC) ${srcdir}/emacstool.c -o emacstool ${ALL_CFLAGS} \
	  -lsuntool -lsunwindow -lpixrect $(LOADLIBES)

/* For SUN Japanese Language Environment.  */
nemacstool: ${srcdir}/emacstool.c
	$(CC) -o nemacstool -DJLE ${ALL_CFLAGS} ${srcdir}/emacstool.c \
	  -lsuntool -lmle -lsunwindow -lpixrect $(LOADLIBES)

xvetool: ${srcdir}/emacstool.c
	$(CC) -o xvetool -DXVIEW ${ALL_CFLAGS} ${srcdir}/emacstool.c \
	  -lxview -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \
	  $(LOADLIBES)

xveterm: ${srcdir}/emacstool.c
	$(CC) -o xveterm -DXVIEW -DTTERM ${ALL_CFLAGS} ${srcdir}/emacstool.c \
	  -lxview -lolgx -lX  -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \
	  $(LOADLIBES)

aixcc: ${srcdir}/aixcc.c
	$(CC) $(ALL_CFLAGS) -o aixcc ${srcdir}/aixcc.c

aixcc.c: ${srcdir}/aixcc.lex
	lex ${srcdir}/aixcc.lex
	mv lex.yy.c aixcc.c