Mercurial > emacs
view src/systty.h @ 109949:5f187a091415
Simplify termio code.
All non-MSDOS non-WINDOWSNT platforms define HAVE_TERMIOS, so
HAVE_TERMIO code is obsolete.
Replace HAVE_TERMIOS conditionals with !DOS_NT.
* src/systty.h: Do not define HAVE_TCATTR.
Remove HAVE_TERMIO, HAVE_LTCHARS and HAVE_TCHARS code.
Do not define EMACS_HAVE_TTY_PGRP. Only define
EMACS_GET_TTY_PGRP for !DOS_NT.
* src/sysdep.c: Include sysselect.h unconditionally. Do not include
sys/ioctl.h and termios.h, systty.h does it. Use
HAVE_SYS_UTSNAME_H instead of USG as an include guard.
(init_baud_rate): Remove HAVE_TERMIO code.
(child_setup_tty): Remove HAVE_TERMIO code.
(emacs_get_tty, emacs_set_tty): Remove HAVE_TERMIO, HAVE_TCHARS
and HAVE_LTCHARS code. Use !DOS_NT instead of HAVE_TCATTR.
(new_ltchars, new_tchars): Remove, unused.
(init_sys_modes): Remove HAVE_TERMIO, HAVE_TCHARS and HAVE_LTCHARS
code. Remove special casing for __mips__, it was a no-op. Remove
HAVE_TCATTR conditional, it is implied by HAVE_TERMIOS.
(init_sys_modes): Remove HPUX special case.
* src/process.c: Include stdlib.h unconditionally. Do not include
fcntl.h, systty.h does it. Remove conditional code for
HAVE_SERIAL, it is always true.
(process_send_signal): Remove HAVE_TERMIOS conditional, it's
always true when SIGNALS_VIA_CHARACTERS is true.
(Fcontinue_process, Fprocess_send_eof): Simplify conditionals:
!WINDOWSNT means HAVE_TERMIOS.
(create_process): Remove HAVE_TERMIOS, it's inside a HAVE_PTYS
conditional, which is true for all HAVE_TERMIOS systems.
* src/keyboard.c (init_keyboard): Do not use HAVE_TERMIO, use !DOS_NT
instead of HAVE_TERMIOS.
* src/emacs.c (shut_down_emacs): Use !defined DOS_NT instead of
EMACS_HAVE_TTY_PGRP.
* src/callproc.c (child_setup): Move EMACS_SET_TTY_PGRP use to the
non-MSDOS, non-WINDOWSNT code, it's only defined for such systems
anyway.
author | Dan Nicolaescu <dann@ics.uci.edu> |
---|---|
date | Sun, 22 Aug 2010 08:14:37 -0700 |
parents | 734073f5d073 |
children | 107fd4b37e9d |
line wrap: on
line source
/* systty.h - System-dependent definitions for terminals. Copyright (C) 1993, 1994, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ /* Include the proper files. */ #ifndef DOS_NT #ifndef NO_TERMIO #include <termio.h> #endif /* not NO_TERMIO */ #include <termios.h> #include <fcntl.h> #endif /* not DOS_NT */ #ifdef HAVE_SYS_IOCTL_H #include <sys/ioctl.h> #endif #ifdef HPUX #include <sys/bsdtty.h> #include <sys/ptyio.h> #endif #ifdef AIX #include <sys/pty.h> #endif /* AIX */ #ifdef HAVE_UNISTD_H #include <unistd.h> #endif /* Special cases - inhibiting the use of certain features. */ /* Allow m- file to inhibit use of FIONREAD. */ #ifdef BROKEN_FIONREAD #undef FIONREAD #undef ASYNC #endif /* Interrupt input is not used if there is no FIONREAD. */ #ifndef FIONREAD #undef SIGIO #endif /* Try to establish the correct character to disable terminal functions in a system-independent manner. Note that USG (at least) define _POSIX_VDISABLE as 0! */ #ifdef _POSIX_VDISABLE #define CDISABLE _POSIX_VDISABLE #else /* not _POSIX_VDISABLE */ #ifdef CDEL #undef CDISABLE #define CDISABLE CDEL #else /* not CDEL */ #define CDISABLE 255 #endif /* not CDEL */ #endif /* not _POSIX_VDISABLE */ /* Get the number of characters queued for output. */ /* EMACS_OUTQSIZE(FD, int *SIZE) stores the number of characters queued for output to the terminal FD in *SIZE, if FD is a tty. Returns -1 if there was an error (i.e. FD is not a tty), 0 otherwise. */ #ifdef TIOCOUTQ #define EMACS_OUTQSIZE(fd, size) (ioctl ((fd), TIOCOUTQ, (size))) #endif /* Manipulate a terminal's current process group. */ /* EMACS_GET_TTY_PGRP(int FD, int *PGID) sets *PGID the terminal FD's current process group. Return -1 if there is an error. EMACS_SET_TTY_PGRP(int FD, int *PGID) sets the terminal FD's current process group to *PGID. Return -1 if there is an error. */ #ifndef DOS_NT #define EMACS_GET_TTY_PGRP(fd, pgid) (*(pgid) = tcgetpgrp ((fd))) #define EMACS_SET_TTY_PGRP(fd, pgid) (tcsetpgrp ((fd), *(pgid))) #endif /* not DOS_NT */ /* EMACS_GETPGRP (arg) returns the process group of the process. */ #if defined (GETPGRP_VOID) # define EMACS_GETPGRP(x) getpgrp() #else /* !GETPGRP_VOID */ # define EMACS_GETPGRP(x) getpgrp(x) #endif /* !GETPGRP_VOID */ /* Manipulate a TTY's input/output processing parameters. */ /* struct emacs_tty is a structure used to hold the current tty parameters. If the terminal has several structures describing its state, for example a struct tchars, a struct sgttyb, a struct tchars, a struct ltchars, and a struct pagechars, struct emacs_tty should contain an element for each parameter struct that Emacs may change. EMACS_GET_TTY (int FD, struct emacs_tty *P) stores the parameters of the tty on FD in *P. Return zero if all's well, or -1 if we ran into an error we couldn't deal with. EMACS_SET_TTY (int FD, struct emacs_tty *P, int flushp) sets the parameters of the tty on FD according to the contents of *P. If flushp is non-zero, we discard queued input to be written before making the change. Return 0 if all went well, and -1 if anything failed. EMACS_TTY_TABS_OK (struct emacs_tty *P) is false if the kernel expands tabs to spaces upon output; in that case, there is no advantage to using tabs over spaces. */ /* For each tty parameter structure that Emacs might want to save and restore, - include an element for it in this structure, and - extend the emacs_{get,set}_tty functions in sysdep.c to deal with the new members. */ struct emacs_tty { /* There is always one of the following elements, so there is no need for dummy get and set definitions. */ #ifndef DOS_NT struct termios main; #else /* DOS_NT */ int main; #endif /* DOS_NT */ }; /* Define EMACS_GET_TTY and EMACS_SET_TTY, the macros for reading and setting parts of `struct emacs_tty'. These got pretty unmanageable (huge macros are hard to debug), and finally needed some code which couldn't be done as part of an expression, so we moved them out to their own functions in sysdep.c. */ #define EMACS_GET_TTY(fd, p) (emacs_get_tty ((fd), (p))) #define EMACS_SET_TTY(fd, p, waitp) (emacs_set_tty ((fd), (p), (waitp))) extern int emacs_get_tty (int, struct emacs_tty *); extern int emacs_set_tty (int, struct emacs_tty *, int); /* Define EMACS_TTY_TABS_OK. */ #ifndef DOS_NT #ifdef TABDLY #define EMACS_TTY_TABS_OK(p) (((p)->main.c_oflag & TABDLY) != TAB3) #else /* not TABDLY */ #define EMACS_TTY_TABS_OK(p) 1 #endif /* not TABDLY */ #else /* DOS_NT */ #define EMACS_TTY_TABS_OK(p) 0 #endif /* DOS_NT */ /* arch-tag: cf4b90bc-be41-401c-be98-40619178a712 (do not change this comment) */