Mercurial > emacs
view lib-src/Makefile.in @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | 2a5085c32935 |
children | ba8033f10607 |
line wrap: on
line source
# DIST: This is the distribution Makefile for Emacs. configure can # DIST: make most of the changes to this file you might want, so try # DIST: that first. # add -DUSG for SysV movemail and timer # For Xenix, add the following for movemail: # LOADLIBES= -lx # For Mips, the following is needed for who knows what. # LOADLIBES = -lmld /usr/bsd43/usr/lib/libc.a # Avoid trouble on systems where the `SHELL' variable might be # inherited from the environment. SHELL = /bin/sh # ==================== Things `configure' will edit ==================== CC=@CC@ CFLAGS=@CFLAGS@ ALLOCA=@ALLOCA@ C_SWITCH_SYSTEM=@c_switch_system@ LOADLIBES=@libsrc_libs@ YACC=@YACC@ version=@version@ configname=@configuration@ # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in # subdirectories of this directory. The default values for many of # the variables below are expressed in terms of this one, so you may # not need to change them. This is set with the --prefix option to # `../configure'. prefix=@prefix@ # Like `prefix', but used for architecture-specific files. This is # set with the --exec-prefix option to `../configure'. exec_prefix=@exec_prefix@ # Where to install Emacs and other binaries that people will want to # run directly (like etags). This is set with the --bindir option # to `../configure'. bindir=@bindir@ # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. ${archlibdir} is usually below this. This is set with the # --libdir option to `../configure'. libdir=@libdir@ # Where to find the source code. This is set by the configure # script's `--srcdir' option. However, the value of ${srcdir} in # this makefile is not identical to what was specified with --srcdir, # since the variable here has `/lib-src' added at the end. srcdir=@srcdir@ VPATH=@srcdir@ # ==================== Emacs-specific directories ==================== # These variables hold the values Emacs will actually use. They are # based on the values of the standard Make variables above. # Where to put executables to be run by Emacs rather than the user. # This path usually includes the Emacs version and configuration name, # so that multiple configurations for multiple versions of Emacs may # be installed at once. This can be set with the --archlibdir option # to `../configure'. archlibdir=@archlibdir@ # ==================== Utility Programs for the Build ==================== # ../configure figures out the correct values for these. INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ # ============================= Targets ============================== # Things that a user might actually run, which should be installed in bindir. INSTALLABLES = etags ctags emacsclient b2m INSTALLABLE_SCRIPTS = rcs-checkin # Things that Emacs runs internally, or during the build process, # which should not be installed in bindir. UTILITIES= test-distrib make-path wakeup make-docfile digest-doc sorted-doc \ movemail cvtmail fakemail yow env emacsserver hexl timer # Like UTILITIES, but they're not system-dependent, and should not be # deleted by the distclean target. SCRIPTS= rcs2log vcdiff EXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS} SOURCES = COPYING ChangeLog Makefile.in README aixcc.lex emacs.csh \ makedoc.com *.[chy] rcs2log vcdiff ### We need to #define emacs to get the right versions of some files. ### Some other files - those shared with other GNU utilities - need ### HAVE_CONFIG_H #defined before they know they can take advantage of ### the information in ../src/config.h. ALL_CFLAGS = ${C_SWITCH_SYSTEM} -Demacs -DHAVE_CONFIG_H \ -I. -I../src -I${srcdir} -I${srcdir}/../src ${CFLAGS} CPP_CFLAGS = ${C_SWITCH_SYSTEM} -Demacs -DHAVE_CONFIG_H \ -I. -I../src -I${srcdir} -I${srcdir}/../src ${CPPFLAGS} ${CFLAGS} # This is the default compilation command. # But we should never rely on it, because some make version # failed to find it for getopt.o. Using an explicit command made it work. .c.o: ${CC} -c ${CPP_CFLAGS} $< all: ${UTILITIES} ${INSTALLABLES} ### Install the internal utilities. Until they are installed, we can ### just run them directly from lib-src. ${archlibdir}: all @echo @echo "Installing utilities run internally by Emacs." ./make-path ${archlibdir} if [ `(cd ${archlibdir} && /bin/pwd)` != `/bin/pwd` ]; then \ for file in ${UTILITIES}; do \ $(INSTALL_PROGRAM) $$file ${archlibdir}/$$file ; \ chmod 755 ${archlibdir}/$$file ; \ done ; \ for file in ${SCRIPTS}; do \ $(INSTALL_PROGRAM) ${srcdir}/$$file ${archlibdir}/$$file ; \ chmod 755 ${archlibdir}/$$file ; \ done ; \ fi @echo @echo "Changing the owner and group of Emacs's utility programs to \`bin'." @echo "(You may ignore errors here if you don't care about this.)" -for file in ${UTILITIES} ${SCRIPTS} ; do \ chgrp bin ${archlibdir}/$${file} ; \ chown bin ${archlibdir}/$${file} ; \ done # We don't need to install `wakeup' explicitly, because it will be copied when # this whole directory is copied. # We use .n, not .new as before, to avoid exceeding the 14-character limit. install: ${archlibdir} @echo @echo "Installing utilities for users to run." for file in ${INSTALLABLES} ; do \ cp $${file} ${bindir}/$${file}.n ; \ chmod 755 ${bindir}/$${file}.n ; \ done for file in ${INSTALLABLE_SCRIPTS} ; do \ cp ${srcdir}/$${file} ${bindir}/$${file}.n ; \ chmod 755 ${bindir}/$${file}.n ; \ done @echo @echo "Changing the owner and group of utility programs to \`bin'." @echo "(You may ignore errors here if you don't care about this.)" -for file in ${INSTALLABLES} ${INSTALLABLE_SCRIPTS} ; do \ chgrp bin ${bindir}/$${file}.n ; \ chown bin ${bindir}/$${file}.n ; \ rm -f ${bindir}/$${file} ; \ mv ${bindir}/$${file}.n ${bindir}/$${file} ; \ done uninstall: (cd ${bindir}; \ rm -f ${INSTALLABLES} ${INSTALLABLE_SCRIPTS}) (cd ${archlibdir}; \ rm -f ${UTILITIES} ${INSTALLABLES} ${SCRIPTS} ${INSTALLABLE_SCRIPTS}) clean mostlyclean: -rm -f ${INSTALLABLES} ${UTILITIES} core *.o distclean: clean -rm -f ../etc/DOC* *.tab.c *.tab.h aixcc.c TAGS realclean: distclean true extraclean: realclean -rm -f *~ \#* unlock: chmod u+w $(SOURCES) relock: chmod u-w $(SOURCES) # Test the contents of the directory. check: @echo "We don't have any tests for GNU Emacs yet." TAGS: etags etags *.[ch] # This verifies that the non-ASCII characters in the file `testfile' # have not been clobbered by whatever means were used to copy and # distribute Emacs. If they were clobbered, all the .elc files were # clobbered too. test-distrib: ${srcdir}/test-distrib.c $(CC) -o test-distrib ${srcdir}/test-distrib.c ./test-distrib ${srcdir}/testfile GETOPTOBJS = getopt.o getopt1.o $(ALLOCA) GETOPTDEPS = $(GETOPTOBJS) ${srcdir}/getopt.h getopt.o: ${srcdir}/getopt.c ${srcdir}/getopt.h ${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt.c getopt1.o: ${srcdir}/getopt1.c ${srcdir}/getopt.h ${CC} -c ${CPP_CFLAGS} ${srcdir}/getopt1.c etags: ${srcdir}/etags.c $(GETOPTDEPS) ../src/config.h $(CC) ${CPP_CFLAGS} -DETAGS ${srcdir}/etags.c $(GETOPTOBJS) $(LOADLIBES) -o etags # We depend on etags to assure that parallel makes don't write two # etags.o files on top of each other. ctags: ${srcdir}/etags.c $(GETOPTDEPS) etags $(CC) ${CPP_CFLAGS} -DCTAGS ${srcdir}/etags.c $(GETOPTOBJS) $(LOADLIBES) -o ctags wakeup: ${srcdir}/wakeup.c $(CC) ${CPP_CFLAGS} ${srcdir}/wakeup.c $(LOADLIBES) -o wakeup make-docfile: ${srcdir}/make-docfile.c $(CC) ${CPP_CFLAGS} ${srcdir}/make-docfile.c $(LOADLIBES) -o make-docfile digest-doc: ${srcdir}/digest-doc.c $(CC) ${CPP_CFLAGS} ${srcdir}/digest-doc.c $(LOADLIBES) -o digest-doc sorted-doc: ${srcdir}/sorted-doc.c ${ALLOCA} $(CC) ${CPP_CFLAGS} ${srcdir}/sorted-doc.c ${ALLOCA} $(LOADLIBES) -o sorted-doc b2m: ${srcdir}/b2m.c ../src/config.h $(CC) ${CPP_CFLAGS} ${srcdir}/b2m.c $(LOADLIBES) -o b2m movemail: ${srcdir}/movemail.c ../src/config.h $(CC) ${CPP_CFLAGS} ${srcdir}/movemail.c $(LOADLIBES) -o movemail cvtmail: ${srcdir}/cvtmail.c $(CC) ${CPP_CFLAGS} ${srcdir}/cvtmail.c $(LOADLIBES) -o cvtmail fakemail: ${srcdir}/fakemail.c ../src/config.h $(CC) ${CPP_CFLAGS} ${srcdir}/fakemail.c $(LOADLIBES) -o fakemail yow: ${srcdir}/yow.c ../src/paths.h $(CC) ${CPP_CFLAGS} ${srcdir}/yow.c $(LOADLIBES) -o yow env: ${srcdir}/env.c ../src/config.h $(CC) -DEMACS ${CPP_CFLAGS} ${srcdir}/env.c $(LOADLIBES) -o env emacsserver: ${srcdir}/emacsserver.c ../src/config.h $(CC) ${CPP_CFLAGS} ${srcdir}/emacsserver.c $(LOADLIBES) -o emacsserver emacsclient: ${srcdir}/emacsclient.c ../src/config.h $(CC) ${CPP_CFLAGS} ${srcdir}/emacsclient.c $(LOADLIBES) -o emacsclient hexl: ${srcdir}/hexl.c $(CC) ${CPP_CFLAGS} ${srcdir}/hexl.c $(LOADLIBES) -o hexl TIMEROBJS=getdate.o timer.o $(ALLOCA) getdate.o: ${srcdir}/getdate.y ../src/config.h ${YACC} ${YFLAGS} ${srcdir}/getdate.y $(CC) $(CPP_CFLAGS) -c y.tab.c mv y.tab.o getdate.o timer.o: ${srcdir}/timer.c ../src/config.h $(CC) -c $(CPP_CFLAGS) ${srcdir}/timer.c timer: ${TIMEROBJS} $(CC) $(ALL_CFLAGS) ${TIMEROBJS} $(LOADLIBES) -o timer make-path: ${srcdir}/make-path.c ../src/config.h $(CC) $(CPP_CFLAGS) ${srcdir}/make-path.c -o make-path # These are NOT included in INSTALLABLES or UTILITIES. # See ../src/ymakefile. emacstool: ${srcdir}/emacstool.c $(CC) ${srcdir}/emacstool.c -o emacstool ${CPP_CFLAGS} \ -lsuntool -lsunwindow -lpixrect $(LOADLIBES) # For SUN Japanese Language Environment nemacstool: ${srcdir}/emacstool.c $(CC) -o nemacstool -DJLE ${CPP_CFLAGS} ${srcdir}/emacstool.c \ -lsuntool -lmle -lsunwindow -lpixrect $(LOADLIBES) xvetool: ${srcdir}/emacstool.c $(CC) -o xvetool -DXVIEW ${CPP_CFLAGS} ${srcdir}/emacstool.c \ -lxview -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \ $(LOADLIBES) xveterm: ${srcdir}/emacstool.c $(CC) -o xveterm -DXVIEW -DTTERM ${CPP_CFLAGS} ${srcdir}/emacstool.c \ -lxview -lolgx -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \ $(LOADLIBES) aixcc: ${srcdir}/aixcc.c $(CC) $(CPP_CFLAGS) -o aixcc ${srcdir}/aixcc.c aixcc.c: ${srcdir}/aixcc.lex lex ${srcdir}/aixcc.lex mv lex.yy.c aixcc.c