Mercurial > emacs
view lisp/=sc-elec.el @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | 5180778aedcb |
children |
line wrap: on
line source
;; -*- Mode: Emacs-Lisp -*- ;; sc-elec.el -- Version 2.3 ;; ========== Introduction ========== ;; This file contains sc-electric mode for viewing reference headers. ;; It is loaded automatically by supercite.el when needed. ;; ========== Disclaimer ========== ;; This software is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY. No author or distributor accepts ;; responsibility to anyone for the consequences of using it or for ;; whether it serves any particular purpose or works at all, unless he ;; says so in writing. ;; Some of this software was written as part of the supercite author's ;; official duty as an employee of the United States Government and is ;; thus in the public domain. You are free to use that particular ;; software as you wish, but WITHOUT ANY WARRANTY WHATSOEVER. It ;; would be nice, though if when you use any of this code, you give ;; due credit to the author. ;; Other parts of this code were written by other people. Wherever ;; possible, credit to that author, and the copy* notice supplied by ;; the author are included with that code. In all cases, the spirit, ;; if not the letter of the GNU General Public Licence applies. ;; ========== Author (unless otherwise stated) ========== ;; NAME: Barry A. Warsaw USMAIL: Century Computing, Inc. ;; TELE: (301) 593-3330 1014 West Street ;; UUCP: uunet!cen.com!bwarsaw Laurel, MD 20707 ;; INET: bwarsaw@cen.com ;; Want to be on the Supercite mailing list? ;; ;; Send articles to: ;; INET: supercite@anthem.nlm.nih.gov ;; UUCP: uunet!anthem.nlm.nih.gov!supercite ;; ;; Send administrivia (additions/deletions to list, etc) to: ;; INET: supercite-request@anthem.nlm.nih.gov ;; UUCP: uunet!anthem.nlm.nih.gov!supercite-request ;; (provide 'sc-elec) ;; ====================================================================== ;; set up vars for major mode (defconst sc-electric-bufname "*sc-erefs*" "*Supercite's electric buffer name.") (defvar sc-electric-mode-hook nil "*Hook for sc-electric-mode.") ;; ====================================================================== ;; sc-electric-mode (defun sc-electric-mode (&optional arg) "Quasi major mode for viewing supercite reference headers. Commands are: \\{sc-electric-mode-map} Sc-electric-mode is not intended to be run interactively, but rather accessed through supercite's electric reference feature. See sc-insert-reference for more details. Optional ARG is the initial header style to use, unless not supplied or invalid, in which case sc-preferred-header-style is used." (let ((gal sc-gal-information) (sc-eref-style (if arg ;; assume passed arg is okay arg (if (and (natnump sc-preferred-header-style) (sc-valid-index-p sc-preferred-header-style)) sc-preferred-header-style 0)))) (get-buffer-create sc-electric-bufname) ;; set up buffer and enter command loop (save-excursion (save-window-excursion (pop-to-buffer sc-electric-bufname) (kill-all-local-variables) (setq sc-gal-information gal buffer-read-only t mode-name "Supercite-Electric-References" major-mode 'sc-electric-mode) (use-local-map sc-electric-mode-map) (sc-eref-show sc-eref-style) (run-hooks 'sc-electric-mode-hook) (recursive-edit) )) (if sc-eref-style (condition-case nil (eval (nth sc-eref-style sc-rewrite-header-list)) (error nil) )) ;; now restore state (kill-buffer sc-electric-bufname) )) ;; ====================================================================== ;; functions for electric mode (defun sc-eref-index (index) "Check INDEX to be sure it is a valid index into sc-rewrite-header-list. If sc-electric-circular-p is non-nil, then list is considered circular so that movement across the ends of the list wraparound." (let ((last (1- (length sc-rewrite-header-list)))) (cond ((sc-valid-index-p index) index) ((< index 0) (if sc-electric-circular-p last (progn (error "No preceding reference headers in list.") 0))) ((> index last) (if sc-electric-circular-p 0 (progn (error "No following reference headers in list.") last))) ) )) (defun sc-eref-show (index) "Show reference INDEX in sc-rewrite-header-list." (setq sc-eref-style (sc-eref-index index)) (save-excursion (set-buffer sc-electric-bufname) (let ((ref (nth sc-eref-style sc-rewrite-header-list)) (buffer-read-only nil)) (erase-buffer) (goto-char (point-min)) (condition-case err (progn (set-mark (point-min)) (eval ref) (message "Showing reference header %d." sc-eref-style) (goto-char (point-max)) ) (void-function (progn (message "Symbol's function definition is void: %s (Header %d)" (symbol-name (car (cdr err))) sc-eref-style) (beep) )) )))) ;; ====================================================================== ;; interactive commands (defun sc-eref-next () "Display next reference in other buffer." (interactive) (sc-eref-show (1+ sc-eref-style))) (defun sc-eref-prev () "Display previous reference in other buffer." (interactive) (sc-eref-show (1- sc-eref-style))) (defun sc-eref-setn () "Set reference header selected as preferred." (interactive) (setq sc-preferred-header-style sc-eref-style) (message "Preferred reference style set to header %d." sc-eref-style)) (defun sc-eref-goto (refnum) "Show reference style indexed by REFNUM. If REFNUM is an invalid index, don't go to that reference and return nil." (interactive "NGoto Reference: ") (if (sc-valid-index-p refnum) (sc-eref-show refnum) (error "Invalid reference: %d. (Range: [%d .. %d])" refnum 0 (1- (length sc-rewrite-header-list))) )) (defun sc-eref-jump () "Set reference header to preferred header." (interactive) (sc-eref-show sc-preferred-header-style)) (defun sc-eref-abort () "Exit from electric reference mode without inserting reference." (interactive) (setq sc-eref-style nil) (exit-recursive-edit)) (defun sc-eref-exit () "Exit from electric reference mode and insert selected reference." (interactive) (exit-recursive-edit))