Mercurial > emacs
view lisp/add-log.el @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | c0ea0009268a |
children | 61c4250fb760 |
line wrap: on
line source
;;; add-log.el --- change log maintenance commands for Emacs ;; Copyright (C) 1985, 1986, 1988, 1993 Free Software Foundation, Inc. ;; Keywords: maint ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ;;; Commentary: ;; This facility is documented in the Emacs Manual. ;;; Code: ;;;###autoload (defvar change-log-default-name nil "*Name of a change log file for \\[add-change-log-entry].") ;;;###autoload (defvar add-log-current-defun-function nil "\ *If non-nil, function to guess name of current function from surrounding text. \\[add-change-log-entry] calls this function (if nil, `add-log-current-defun' instead) with no arguments. It returns a string or nil if it cannot guess.") ;;;###autoload (defvar add-log-full-name (user-full-name) "*Full name of user, for inclusion in ChangeLog daily headers. This defaults to the value returned by the `user-full-name' function.") ;;;###autoload (defvar add-log-mailing-address (concat (user-login-name) "@" (system-name)) "*Electronic mail address of user, for inclusion in ChangeLog daily headers. This defaults to the value returned by `user-login-name', followed by an `@' character, followed by the value returned by `system-name'.") (defun change-log-name () (or change-log-default-name (if (eq system-type 'vax-vms) "$CHANGE_LOG$.TXT" "ChangeLog"))) ;;;###autoload (defun prompt-for-change-log-name () "Prompt for a change log name." (let ((default (change-log-name))) (expand-file-name (read-file-name (format "Log file (default %s): " default) nil default)))) ;;;###autoload (defun find-change-log (&optional file-name) "Find a change log file for \\[add-change-log-entry] and return the name. Optional arg FILE-NAME is a name to try first. If FILE-NAME is nil, use the value of `change-log-default-name' if non-nil. Failing that, use \"ChangeLog\" in the current directory. If the file does not exist in the named directory, successive parent directories are tried. Once a file is found, `change-log-default-name' is set locally in the current buffer to the complete file name." (or file-name (setq file-name (or change-log-default-name ;; Chase links in the source file ;; and use the change log in the dir where it points. (and buffer-file-name (file-name-directory (file-chase-links buffer-file-name))) default-directory))) (if (and (eq file-name change-log-default-name) (assq 'change-log-default-name (buffer-local-variables))) ;; Don't do the searching if we already have a buffer-local value. file-name (if (file-directory-p file-name) (setq file-name (expand-file-name (change-log-name) file-name))) ;; Chase links before visiting the file. ;; This makes it easier to use a single change log file ;; for several related directories. (setq file-name (file-chase-links file-name)) (setq file-name (expand-file-name file-name)) ;; Move up in the dir hierarchy till we find a change log file. (let ((file1 file-name) parent-dir) (while (and (not (or (get-file-buffer file1) (file-exists-p file1))) (progn (setq parent-dir (file-name-directory (directory-file-name (file-name-directory file1)))) ;; Give up if we are already at the root dir. (not (string= (file-name-directory file1) parent-dir)))) ;; Move up to the parent dir and try again. (setq file1 (expand-file-name (change-log-name) parent-dir))) ;; If we found a change log in a parent, use that. (if (or (get-file-buffer file1) (file-exists-p file1)) (setq file-name file1))) ;; Make a local variable in this buffer so we needn't search again. (set (make-local-variable 'change-log-default-name) file-name) file-name)) ;;;###autoload (defun add-change-log-entry (&optional whoami file-name other-window new-entry) "Find change log file and add an entry for today. Optional arg (interactive prefix) non-nil means prompt for user name and site. Second arg is file name of change log. If nil, uses `change-log-default-name'. Third arg OTHER-WINDOW non-nil means visit in other window. Fourth arg NEW-ENTRY non-nil means always create a new entry at the front; never append to an existing entry." (interactive (list current-prefix-arg (prompt-for-change-log-name))) (if whoami (progn (setq add-log-full-name (read-input "Full name: " add-log-full-name)) ;; Note that some sites have room and phone number fields in ;; full name which look silly when inserted. Rather than do ;; anything about that here, let user give prefix argument so that ;; s/he can edit the full name field in prompter if s/he wants. (setq add-log-mailing-address (read-input "Mailing address: " add-log-mailing-address)))) (let ((defun (funcall (or add-log-current-defun-function 'add-log-current-defun))) paragraph-end entry) (setq file-name (find-change-log file-name)) ;; Set ENTRY to the file name to use in the new entry. (and buffer-file-name ;; Never want to add a change log entry for the ChangeLog file itself. (not (string= buffer-file-name file-name)) (setq entry (if (string-match (concat "^" (regexp-quote (file-name-directory file-name))) buffer-file-name) (substring buffer-file-name (match-end 0)) (file-name-nondirectory buffer-file-name)))) (if (and other-window (not (equal file-name buffer-file-name))) (find-file-other-window file-name) (find-file file-name)) (undo-boundary) (goto-char (point-min)) (if (looking-at (concat (regexp-quote (substring (current-time-string) 0 10)) ".* " (regexp-quote add-log-full-name) " (" (regexp-quote add-log-mailing-address))) (forward-line 1) (insert (current-time-string) " " add-log-full-name " (" add-log-mailing-address ")\n\n")) ;; Search only within the first paragraph. (if (looking-at "\n*[^\n* \t]") (skip-chars-forward "\n") (forward-paragraph 1)) (setq paragraph-end (point)) (goto-char (point-min)) ;; Now insert the new line for this entry. (cond ((re-search-forward "^\\s *\\*\\s *$" paragraph-end t) ;; Put this file name into the existing empty entry. (if entry (insert entry))) ((and (not new-entry) (re-search-forward (concat (regexp-quote (concat "* " entry)) ;; Don't accept `foo.bar' when ;; looking for `foo': "\\(\\s \\|[(),:]\\)") paragraph-end t)) ;; Add to the existing entry for the same file. (re-search-forward "^\\s *$\\|^\\s \\*") (beginning-of-line) (while (and (not (eobp)) (looking-at "^\\s *$")) (delete-region (point) (save-excursion (forward-line 1) (point)))) (insert "\n\n") (forward-line -2) (indent-relative-maybe)) (t ;; Make a new entry. (forward-line 1) (while (looking-at "\\sW") (forward-line 1)) (while (and (not (eobp)) (looking-at "^\\s *$")) (delete-region (point) (save-excursion (forward-line 1) (point)))) (insert "\n\n\n") (forward-line -2) (indent-to left-margin) (insert "* " (or entry "")))) ;; Now insert the function name, if we have one. ;; Point is at the entry for this file, ;; either at the end of the line or at the first blank line. (if defun (progn ;; Make it easy to get rid of the function name. (undo-boundary) (insert (if (save-excursion (beginning-of-line 1) (looking-at "\\s *$")) "" " ") "(" defun "): ")) ;; No function name, so put in a colon unless we have just a star. (if (not (save-excursion (beginning-of-line 1) (looking-at "\\s *\\(\\*\\s *\\)?$"))) (insert ": "))))) ;;;###autoload (defun add-change-log-entry-other-window (&optional whoami file-name) "Find change log file in other window and add an entry for today. Optional arg (interactive prefix) non-nil means prompt for user name and site. Second arg is file name of change log. \ If nil, uses `change-log-default-name'." (interactive (if current-prefix-arg (list current-prefix-arg (prompt-for-change-log-name)))) (add-change-log-entry whoami file-name t)) ;;;###autoload (define-key ctl-x-4-map "a" 'add-change-log-entry-other-window) ;;;###autoload (defun change-log-mode () "Major mode for editing change logs; like Indented Text Mode. Prevents numeric backups and sets `left-margin' to 8 and `fill-column' to 74. New log entries are usually made with \\[add-change-log-entry] or \\[add-change-log-entry-other-window]. Each entry behaves as a paragraph, and the entries for one day as a page. Runs `change-log-mode-hook'." (interactive) (kill-all-local-variables) (indented-text-mode) (setq major-mode 'change-log-mode mode-name "Change Log" left-margin 8 fill-column 74) (use-local-map change-log-mode-map) ;; Let each entry behave as one paragraph: (set (make-local-variable 'paragraph-start) "^\\s *$\\|^\f") (set (make-local-variable 'paragraph-separate) "^\\s *$\\|^\f\\|^\\sw") ;; Let all entries for one day behave as one page. ;; Match null string on the date-line so that the date-line ;; is grouped with what follows. (set (make-local-variable 'page-delimiter) "^\\<\\|^\f") (set (make-local-variable 'version-control) 'never) (set (make-local-variable 'adaptive-fill-regexp) "\\s *") (run-hooks 'change-log-mode-hook)) (defvar change-log-mode-map nil "Keymap for Change Log major mode.") (if change-log-mode-map nil (setq change-log-mode-map (make-sparse-keymap)) (define-key change-log-mode-map "\M-q" 'change-log-fill-paragraph)) ;; It might be nice to have a general feature to replace this. The idea I ;; have is a variable giving a regexp matching text which should not be ;; moved from bol by filling. change-log-mode would set this to "^\\s *\\s(". ;; But I don't feel up to implementing that today. (defun change-log-fill-paragraph (&optional justify) "Fill the paragraph, but preserve open parentheses at beginning of lines. Prefix arg means justify as well." (interactive "P") (let ((paragraph-separate (concat paragraph-separate "\\|^\\s *\\s(")) (paragraph-start (concat paragraph-start "\\|^\\s *\\s("))) (fill-paragraph justify))) (defvar add-log-current-defun-header-regexp "^\\([A-Z][A-Z_ ]*[A-Z_]\\|[a-z_---A-Z]+\\)[ \t]*[:=]" "*Heuristic regexp used by `add-log-current-defun' for unknown major modes.") (defun add-log-current-defun () "Return name of function definition point is in, or nil. Understands C, Lisp, LaTeX (\"functions\" are chapters, sections, ...), Texinfo (@node titles), and Fortran. Other modes are handled by a heuristic that looks in the 10K before point for uppercase headings starting in the first column or identifiers followed by `:' or `=', see variable `add-log-current-defun-header-regexp'. Has a preference of looking backwards." (condition-case nil (save-excursion (let ((location (point))) (cond ((memq major-mode '(emacs-lisp-mode lisp-mode scheme-mode)) ;; If we are now precisely a the beginning of a defun, ;; make sure beginning-of-defun finds that one ;; rather than the previous one. (or (eobp) (forward-char 1)) (beginning-of-defun) ;; Make sure we are really inside the defun found, not after it. (if (and (progn (end-of-defun) (< location (point))) (progn (forward-sexp -1) (>= location (point)))) (progn (if (looking-at "\\s(") (forward-char 1)) (forward-sexp 1) (skip-chars-forward " ") (buffer-substring (point) (progn (forward-sexp 1) (point)))))) ((and (memq major-mode '(c-mode 'c++-mode)) (save-excursion (beginning-of-line) ;; Use eq instead of = here to avoid ;; error when at bob and char-after ;; returns nil. (while (eq (char-after (- (point) 2)) ?\\) (forward-line -1)) (looking-at "[ \t]*#[ \t]*define[ \t]"))) ;; Handle a C macro definition. (beginning-of-line) (while (eq (char-after (- (point) 2)) ?\\) ;not =; note above (forward-line -1)) (search-forward "define") (skip-chars-forward " \t") (buffer-substring (point) (progn (forward-sexp 1) (point)))) ((memq major-mode '(c-mode 'c++-mode)) (beginning-of-line) ;; See if we are in the beginning part of a function, ;; before the open brace. If so, advance forward. (while (not (looking-at "{\\|\\(\\s *$\\)")) (forward-line 1)) (or (eobp) (forward-char 1)) (beginning-of-defun) (if (progn (end-of-defun) (< location (point))) (progn (backward-sexp 1) (let (beg tem) (forward-line -1) ;; Skip back over typedefs of arglist. (while (and (not (bobp)) (looking-at "[ \t\n]")) (forward-line -1)) ;; See if this is using the DEFUN macro used in Emacs, ;; or the DEFUN macro used by the C library. (if (condition-case nil (and (save-excursion (forward-line 1) (backward-sexp 1) (beginning-of-line) (setq tem (point)) (looking-at "DEFUN\\b")) (>= location tem)) (error nil)) (progn (goto-char tem) (down-list 1) (if (= (char-after (point)) ?\") (progn (forward-sexp 1) (skip-chars-forward " ,"))) (buffer-substring (point) (progn (forward-sexp 1) (point)))) ;; Ordinary C function syntax. (setq beg (point)) (if (condition-case nil ;; Protect against "Unbalanced parens" error. (progn (down-list 1) ; into arglist (backward-up-list 1) (skip-chars-backward " \t") t) (error nil)) ;; Verify initial pos was after ;; real start of function. (if (and (save-excursion (goto-char beg) ;; For this purpose, include the line ;; that has the decl keywords. This ;; may also include some of the ;; comments before the function. (while (and (not (bobp)) (save-excursion (forward-line -1) (looking-at "[^\n\f]"))) (forward-line -1)) (>= location (point))) ;; Consistency check: going down and up ;; shouldn't take us back before BEG. (> (point) beg)) (buffer-substring (point) (progn (backward-sexp 1) (point)))))))))) ((memq major-mode '(TeX-mode plain-TeX-mode LaTeX-mode;; tex-mode.el plain-tex-mode latex-mode;; cmutex.el )) (if (re-search-backward "\\\\\\(sub\\)*\\(section\\|paragraph\\|chapter\\)" nil t) (progn (goto-char (match-beginning 0)) (buffer-substring (1+ (point));; without initial backslash (progn (end-of-line) (point)))))) ((eq major-mode 'texinfo-mode) (if (re-search-backward "^@node[ \t]+\\([^,]+\\)," nil t) (buffer-substring (match-beginning 1) (match-end 1)))) ((eq major-mode 'fortran-mode) ;; must be inside function body for this to work (beginning-of-fortran-subprogram) (let ((case-fold-search t)) ; case-insensitive ;; search for fortran subprogram start (if (re-search-forward "^[ \t]*\\(program\\|subroutine\\|function\ \\|[ \ta-z0-9*]*[ \t]+function\\)" nil t) (progn ;; move to EOL or before first left paren (if (re-search-forward "[(\n]" nil t) (progn (forward-char -1) (skip-chars-backward " \t")) (end-of-line)) ;; Use the name preceding that. (buffer-substring (point) (progn (forward-sexp -1) (point))))))) (t ;; If all else fails, try heuristics (let (case-fold-search) (end-of-line) (if (re-search-backward add-log-current-defun-header-regexp (- (point) 10000) t) (buffer-substring (match-beginning 1) (match-end 1)))))))) (error nil))) (provide 'add-log) ;;; add-log.el ends here