view lisp/byte-run.el @ 4872:628cbf7e7005

(comint-after-partial-file-name-command): Renamed from comint-after-partial-pathname-command. (comint-match-partial-file-name, comint-after-partial-file-name): Renamed from comint-match-partial-pathname, etc. (comint-last-output-start): New variable to record where most recent process output started from. (comint-mode): Initialise it. (comint-output-filter): Set it. (comint-previous-matching-input-string): Moved to comint-previous-matching-input-position. (comint-previous-matching-input-string): Use it. (comint-search-arg, comint-search-start, comint-previous-input-string): New subroutines. (comint-previous-input, comint-next-input, comint-previous-matching-input, comint-next-matching-input, comint-previous-matching-input-from-input, comint-next-matching-input-from-input): Use them. (comint-mode-map): Added signal menu-bar. Moved comint-backward/forward-matching-input to output menu-bar, since they move within the buffer rather than do input. (comint-send-input, comint-after-pmark-p, comint-kill-input, comint-proc-query): Removed serialisation of obtaining the process mark's marker-position. Commented out comint-load-hooks. (comint-dynamic-simple-complete): New subroutine. (comint-dynamic-complete-filename-command): New variable. (comint-after-partial-pathname-command): New variable. (comint-after-partial-pathname): New subroutine. (comint-dynamic-complete): Use them. (comint-mode): Make them local. Renamed comint-dynamic-complete-command to comint-dynamic-complete-command-command for consistency. Renamed comint-file-name-addsuffix/autolist/recexact to comint-completion-addsuffix/autolist/recexact for consistency. (comint-replace-by-expanded-history): Check if input ring size is not big enough for relative reference. (comint-read-input-ring, comint-input-ring-file-name): From shell.el. (shell-write-input-ring): New subroutine. (comint-file-name-prefix): New variable. (comint-directory): New inline subroutine. (comint-dynamic-complete-filename, comint-dynamic-complete-variable, comint-dynamic-list-filename-completions): Use it. (comint-dynamic-complete-filename, comint-dynamic-complete-variable, comint-dynamic-list-filename-completions): Make sure local completion-ignore-case is nil. (comint-next-prompt, comint-previous-prompt): Use paragraph-start and paragraph motion commands rather than re-search-forward and re-search-backward commands. (comint-dynamic-list-input-ring, comint-previous-matching-input-string): Use ring-empty-p rather than zerop and ring-length. (comint-input-ignoredups): New variable. (comint-send-input, shell-read-input-ring): Use it. (comint-mode): Make comint-input-ignoredups local. Doc fix. (comint-scroll-to-bottom-on-input): New variable. (comint-scroll-to-bottom-on-output): New variable. (comint-scroll-show-maximum-output): New variable. (comint-output-filter-hook): New variable, defaults to comint-postoutput-scroll-to-bottom. (comint-output-filter): Renamed from comint-filter for consistency. Now calls comint-output-filter-hook. (comint-preinput-scroll-to-bottom): New subroutine. (comint-postoutput-scroll-to-bottom): New subroutine. (comint-show-maximum-output): New command. (comint-copy-old-input): New command. (comint-send-input): Run comint-output-filter-hook if necessary as a kludge to prevent messy redisplays. (comint-mode-map): Added comint-show-maximum-output to C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i and menu-bar input. (comint-mode): Make local variables comint-scroll-to-bottom-on-input, before-change-function, comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output, and comint-output-filter-hook. (comint-version): Deleted--no need for separate version. (comint-input-ring-index): Make this a permanent local. (comint-mode): Don't alter comint-input-ring-index or comint-input-ring if already set meaningfully. (comint-mode-map): Added keys M-R/S for comint-previous/next-matching-input-from-input and to completion menu-bar. Added comint-forward/backward-matching-input and comint-previous/next-matching-input to completion menu-bar. (comint-mode): Doc fix for functionality. (comint-exec-1): Uses setenv. (comint-update-env): Removed. (comint-input-ring-size): Incremented to 32, as with command history. (comint-dynamic-list-input-ring): Check for zero length ring. Use ring length, not ring size, when generating list. Use buffer " *Input History*". (comint-previous-matching-input-string): Check for zero-length ring. Check last item in case at end of cycle and it's a match. (comint-searching-input-ring): New subroutine. (comint-regexp-arg): New subroutine. (comint-previous-matching-input-from-input): New command. (comint-next-matching-input-from-input): New command. (comint-replace-by-expanded-history): Fix for matching inside quotes. Fix to allow argument subrange specifiers. Fix to identify and reject absolute input number references. (comint-within-quotes): New subroutine. (comint-how-many-region): New subroutine. (comint-args): New subroutine. (comint-delim-arg): New subroutine. (comint-arguments): New subroutine. (comint-delimiter-argument-list): New variable. (comint-send-input): Inserts input arguments into ring separated by single spaces. (comint-filter): Checks the buffer's process to make sure it's still there. Otherwise, set-buffer will fail. (comint-backward-matching-input): New command. (comint-forward-matching-input): New command. (comint-next-prompt, comint-previous-prompt): Error if reach beg/end of buffer. (comint-dynamic-complete): Fix for absolute input number references. (comint-dynamic-complete-filename): Changed listings function to comint-dynamic-list-filename-completions. Uses file-directory-p rather than string-match to test for directories. (comint-dynamic-list-completions): Changed to list the list of completions supplied as the function argument. Use buffer " *Completions*". (comint-match-partial-pathname): New subroutine. (comint-dynamic-complete-variable): New command. (comint-dynamic-list-filename-completions): New function. (comint-previous-input): Don't use replace-match; just insert before deleting. (comint-magic-space): Use self-insert command. (comint-history-file-name): New variable. (comint-mode): Initialize comint-input-ring before running comint-mode-hook. (comint-input-autoexpand): New variable. (comint-dynamic-complete-command): New variable. (comint-get-current-command): New variable. (comint-read-input-ring): New function. (comint-send-input): Handle history expansion. (comint-input-sentinel): Doc fix. (comint-mode-map): Added key binding for C-c C-h. Added menu bars for completion, input and output. (comint-dynamic-list-input-ring): New function. (comint-previous-input-string): New subroutine. (comint-previous-input): Use it. (comint-previous-matching-input-string): New subroutine. (comint-previous-matching-input): Use it. (comint-replace-by-expanded-history): New command. (comint-magic-space): New command. (comint-replace-by-expanded-filename): Now replaces expanded match for a filename, and then calls filename completion comint-dynamic-complete-filename to do file name completion. (comint-kill-output): Don't kill prompt. (comint-show-output): Don't move point if it's visible where it is, and if point is moved, put it after prompt. (comint-dynamic-complete): Totally new definition. (comint-dynamic-complete-filename): New name for old function comint-dynamic-complete, completes files and lists candidates, souped up for configurability. (comint-dynamic-complete-variable): New command. (comint-file-name-autolist): New variable. (comint-file-name-addsuffix): New variable, (comint-file-name-recexact): New variable.
author Richard M. Stallman <rms@gnu.org>
date Fri, 22 Oct 1993 02:57:36 +0000
parents bd3c525fa6fc
children 83f275dcd93a
line wrap: on
line source

;;; byte-run.el --- byte-compiler support for inlining

;; Copyright (C) 1992 Free Software Foundation, Inc.

;; Author: Jamie Zawinski <jwz@lucid.com>
;;	Hallvard Furuseth <hbf@ulrik.uio.no>
;; Keywords: internal

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

;;; interface to selectively inlining functions.
;;; This only happens when source-code optimization is turned on.

;;; Code:

;; Redefined in byte-optimize.el.
;; This is not documented--it's not clear that we should promote it.
(fset 'inline 'progn)
(put 'inline 'lisp-indent-hook 0)


;;; Interface to inline functions.

;; (defmacro proclaim-inline (&rest fns)
;;   "Cause the named functions to be open-coded when called from compiled code.
;; They will only be compiled open-coded when byte-compile-optimize is true."
;;   (cons 'eval-and-compile
;; 	(mapcar '(lambda (x)
;; 		   (or (memq (get x 'byte-optimizer)
;; 			     '(nil byte-compile-inline-expand))
;; 		       (error
;; 			"%s already has a byte-optimizer, can't make it inline"
;; 			x))
;; 		   (list 'put (list 'quote x)
;; 			 ''byte-optimizer ''byte-compile-inline-expand))
;; 		fns)))

;; (defmacro proclaim-notinline (&rest fns)
;;   "Cause the named functions to no longer be open-coded."
;;   (cons 'eval-and-compile
;; 	(mapcar '(lambda (x)
;; 		   (if (eq (get x 'byte-optimizer) 'byte-compile-inline-expand)
;; 		       (put x 'byte-optimizer nil))
;; 		   (list 'if (list 'eq (list 'get (list 'quote x) ''byte-optimizer)
;; 				   ''byte-compile-inline-expand)
;; 			 (list 'put x ''byte-optimizer nil)))
;; 		fns)))

;; This has a special byte-hunk-handler in bytecomp.el.
(defmacro defsubst (name arglist &rest body)
  "Define an inline function.  The syntax is just like that of `defun'."
  (or (memq (get name 'byte-optimizer)
	    '(nil byte-compile-inline-expand))
      (error "`%s' is a primitive" name))
  (list 'prog1
	(cons 'defun (cons name (cons arglist body)))
	(list 'eval-and-compile
	      (list 'put (list 'quote name)
		    ''byte-optimizer ''byte-compile-inline-expand))))

(defun make-obsolete (fn new)
  "Make the byte-compiler warn that FUNCTION is obsolete.
The warning will say that NEW should be used instead.
If NEW is a string, that is the `use instead' message."
  (interactive "aMake function obsolete: \nxObsoletion replacement: ")
  (let ((handler (get fn 'byte-compile)))
    (if (eq 'byte-compile-obsolete handler)
	(setcar (get fn 'byte-obsolete-info) new)
      (put fn 'byte-obsolete-info (cons new handler))
      (put fn 'byte-compile 'byte-compile-obsolete)))
  fn)

(defun make-obsolete-variable (var new)
  "Make the byte-compiler warn that VARIABLE is obsolete,
and NEW should be used instead.  If NEW is a string, then that is the
`use instead' message."
  (interactive
   (list
    (let ((str (completing-read "Make variable obsolete: " obarray 'boundp t)))
      (if (equal str "") (error ""))
      (intern str))
    (car (read-from-string (read-string "Obsoletion replacement: ")))))
  (put var 'byte-obsolete-variable new)
  var)

(put 'dont-compile 'lisp-indent-hook 0)
(defmacro dont-compile (&rest body)
  "Like `progn', but the body always runs interpreted (not compiled).
If you think you need this, you're probably making a mistake somewhere."
  (list 'eval (list 'quote (if (cdr body) (cons 'progn body) (car body)))))


;;; interface to evaluating things at compile time and/or load time
;;; these macro must come after any uses of them in this file, as their
;;; definition in the file overrides the magic definitions on the
;;; byte-compile-macro-environment.

(put 'eval-when-compile 'lisp-indent-hook 0)
(defmacro eval-when-compile (&rest body)
  "Like `progn', but evaluates the body at compile time.
The result of the body appears to the compiler as a quoted constant."
  ;; Not necessary because we have it in b-c-initial-macro-environment
  ;; (list 'quote (eval (cons 'progn body)))
  (cons 'progn body))

(put 'eval-and-compile 'lisp-indent-hook 0)
(defmacro eval-and-compile (&rest body)
  "Like `progn', but evaluates the body at compile time and at load time."
  ;; Remember, it's magic.
  (cons 'progn body))


;;; I nuked this because it's not a good idea for users to think of using it.
;;; These options are a matter of installation preference, and have nothing to
;;; with particular source files; it's a mistake to suggest to users
;;; they should associate these with particular source files.
;;; There is hardly any reason to change these parameters, anyway.
;;; --rms.

;; (put 'byte-compiler-options 'lisp-indent-hook 0)
;; (defmacro byte-compiler-options (&rest args)
;;   "Set some compilation-parameters for this file.  This will affect only the
;; file in which it appears; this does nothing when evaluated, and when loaded
;; from a .el file.
;; 
;; Each argument to this macro must be a list of a key and a value.
;; 
;;   Keys:		  Values:		Corresponding variable:
;; 
;;   verbose	  t, nil		byte-compile-verbose
;;   optimize	  t, nil, source, byte	byte-compile-optimize
;;   warnings	  list of warnings	byte-compile-warnings
;; 		      Legal elements: (callargs redefine free-vars unresolved)
;;   file-format	  emacs18, emacs19	byte-compile-compatibility
;; 
;; For example, this might appear at the top of a source file:
;; 
;;     (byte-compiler-options
;;       (optimize t)
;;       (warnings (- free-vars))		; Don't warn about free variables
;;       (file-format emacs19))"
;;   nil)

;;; byte-run.el ends here