view lisp/ehelp.el @ 4872:628cbf7e7005

(comint-after-partial-file-name-command): Renamed from comint-after-partial-pathname-command. (comint-match-partial-file-name, comint-after-partial-file-name): Renamed from comint-match-partial-pathname, etc. (comint-last-output-start): New variable to record where most recent process output started from. (comint-mode): Initialise it. (comint-output-filter): Set it. (comint-previous-matching-input-string): Moved to comint-previous-matching-input-position. (comint-previous-matching-input-string): Use it. (comint-search-arg, comint-search-start, comint-previous-input-string): New subroutines. (comint-previous-input, comint-next-input, comint-previous-matching-input, comint-next-matching-input, comint-previous-matching-input-from-input, comint-next-matching-input-from-input): Use them. (comint-mode-map): Added signal menu-bar. Moved comint-backward/forward-matching-input to output menu-bar, since they move within the buffer rather than do input. (comint-send-input, comint-after-pmark-p, comint-kill-input, comint-proc-query): Removed serialisation of obtaining the process mark's marker-position. Commented out comint-load-hooks. (comint-dynamic-simple-complete): New subroutine. (comint-dynamic-complete-filename-command): New variable. (comint-after-partial-pathname-command): New variable. (comint-after-partial-pathname): New subroutine. (comint-dynamic-complete): Use them. (comint-mode): Make them local. Renamed comint-dynamic-complete-command to comint-dynamic-complete-command-command for consistency. Renamed comint-file-name-addsuffix/autolist/recexact to comint-completion-addsuffix/autolist/recexact for consistency. (comint-replace-by-expanded-history): Check if input ring size is not big enough for relative reference. (comint-read-input-ring, comint-input-ring-file-name): From shell.el. (shell-write-input-ring): New subroutine. (comint-file-name-prefix): New variable. (comint-directory): New inline subroutine. (comint-dynamic-complete-filename, comint-dynamic-complete-variable, comint-dynamic-list-filename-completions): Use it. (comint-dynamic-complete-filename, comint-dynamic-complete-variable, comint-dynamic-list-filename-completions): Make sure local completion-ignore-case is nil. (comint-next-prompt, comint-previous-prompt): Use paragraph-start and paragraph motion commands rather than re-search-forward and re-search-backward commands. (comint-dynamic-list-input-ring, comint-previous-matching-input-string): Use ring-empty-p rather than zerop and ring-length. (comint-input-ignoredups): New variable. (comint-send-input, shell-read-input-ring): Use it. (comint-mode): Make comint-input-ignoredups local. Doc fix. (comint-scroll-to-bottom-on-input): New variable. (comint-scroll-to-bottom-on-output): New variable. (comint-scroll-show-maximum-output): New variable. (comint-output-filter-hook): New variable, defaults to comint-postoutput-scroll-to-bottom. (comint-output-filter): Renamed from comint-filter for consistency. Now calls comint-output-filter-hook. (comint-preinput-scroll-to-bottom): New subroutine. (comint-postoutput-scroll-to-bottom): New subroutine. (comint-show-maximum-output): New command. (comint-copy-old-input): New command. (comint-send-input): Run comint-output-filter-hook if necessary as a kludge to prevent messy redisplays. (comint-mode-map): Added comint-show-maximum-output to C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i and menu-bar input. (comint-mode): Make local variables comint-scroll-to-bottom-on-input, before-change-function, comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output, and comint-output-filter-hook. (comint-version): Deleted--no need for separate version. (comint-input-ring-index): Make this a permanent local. (comint-mode): Don't alter comint-input-ring-index or comint-input-ring if already set meaningfully. (comint-mode-map): Added keys M-R/S for comint-previous/next-matching-input-from-input and to completion menu-bar. Added comint-forward/backward-matching-input and comint-previous/next-matching-input to completion menu-bar. (comint-mode): Doc fix for functionality. (comint-exec-1): Uses setenv. (comint-update-env): Removed. (comint-input-ring-size): Incremented to 32, as with command history. (comint-dynamic-list-input-ring): Check for zero length ring. Use ring length, not ring size, when generating list. Use buffer " *Input History*". (comint-previous-matching-input-string): Check for zero-length ring. Check last item in case at end of cycle and it's a match. (comint-searching-input-ring): New subroutine. (comint-regexp-arg): New subroutine. (comint-previous-matching-input-from-input): New command. (comint-next-matching-input-from-input): New command. (comint-replace-by-expanded-history): Fix for matching inside quotes. Fix to allow argument subrange specifiers. Fix to identify and reject absolute input number references. (comint-within-quotes): New subroutine. (comint-how-many-region): New subroutine. (comint-args): New subroutine. (comint-delim-arg): New subroutine. (comint-arguments): New subroutine. (comint-delimiter-argument-list): New variable. (comint-send-input): Inserts input arguments into ring separated by single spaces. (comint-filter): Checks the buffer's process to make sure it's still there. Otherwise, set-buffer will fail. (comint-backward-matching-input): New command. (comint-forward-matching-input): New command. (comint-next-prompt, comint-previous-prompt): Error if reach beg/end of buffer. (comint-dynamic-complete): Fix for absolute input number references. (comint-dynamic-complete-filename): Changed listings function to comint-dynamic-list-filename-completions. Uses file-directory-p rather than string-match to test for directories. (comint-dynamic-list-completions): Changed to list the list of completions supplied as the function argument. Use buffer " *Completions*". (comint-match-partial-pathname): New subroutine. (comint-dynamic-complete-variable): New command. (comint-dynamic-list-filename-completions): New function. (comint-previous-input): Don't use replace-match; just insert before deleting. (comint-magic-space): Use self-insert command. (comint-history-file-name): New variable. (comint-mode): Initialize comint-input-ring before running comint-mode-hook. (comint-input-autoexpand): New variable. (comint-dynamic-complete-command): New variable. (comint-get-current-command): New variable. (comint-read-input-ring): New function. (comint-send-input): Handle history expansion. (comint-input-sentinel): Doc fix. (comint-mode-map): Added key binding for C-c C-h. Added menu bars for completion, input and output. (comint-dynamic-list-input-ring): New function. (comint-previous-input-string): New subroutine. (comint-previous-input): Use it. (comint-previous-matching-input-string): New subroutine. (comint-previous-matching-input): Use it. (comint-replace-by-expanded-history): New command. (comint-magic-space): New command. (comint-replace-by-expanded-filename): Now replaces expanded match for a filename, and then calls filename completion comint-dynamic-complete-filename to do file name completion. (comint-kill-output): Don't kill prompt. (comint-show-output): Don't move point if it's visible where it is, and if point is moved, put it after prompt. (comint-dynamic-complete): Totally new definition. (comint-dynamic-complete-filename): New name for old function comint-dynamic-complete, completes files and lists candidates, souped up for configurability. (comint-dynamic-complete-variable): New command. (comint-file-name-autolist): New variable. (comint-file-name-addsuffix): New variable, (comint-file-name-recexact): New variable.
author Richard M. Stallman <rms@gnu.org>
date Fri, 22 Oct 1993 02:57:36 +0000
parents 9fab557f1e16
children 45c4759f286e
line wrap: on
line source

;;; ehelp.el --- bindings for electric-help mode

;; Copyright (C) 1986 Free Software Foundation, Inc.

;; Maintainer: FSF
;; Keywords: help, extensions

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to
;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

;;; Commentary:

;; This package provides a pre-packaged `Electric Help Mode' for
;; browsing on-line help screens.  There is one entry point,
;; `with-electric-help'; All you have to give it is a no-argument
;; function that generates the actual text of the help into the current
;; buffer.

;;; Code:

(require 'electric)
(defvar electric-help-map ()
  "Keymap defining commands available in `electric-help-mode'.")

(put 'electric-help-undefined 'suppress-keymap t)
(if electric-help-map
    ()
  (let ((map (make-keymap)))
    (fillarray (car (cdr map)) 'electric-help-undefined)
    (define-key map (char-to-string meta-prefix-char) (copy-keymap map))
    (define-key map (char-to-string help-char) 'electric-help-help)
    (define-key map "?" 'electric-help-help)
    (define-key map " " 'scroll-up)
    (define-key map "\^?" 'scroll-down)
    (define-key map "." 'beginning-of-buffer)
    (define-key map "<" 'beginning-of-buffer)
    (define-key map ">" 'end-of-buffer)
    ;(define-key map "\C-g" 'electric-help-exit)
    (define-key map "q" 'electric-help-exit)
    (define-key map "Q" 'electric-help-exit)
    ;;a better key than this?
    (define-key map "r" 'electric-help-retain)

    (setq electric-help-map map)))
   
(defun electric-help-mode ()
  "`with-electric-help' temporarily places its buffer in this mode.
\(On exit from `with-electric-help', the buffer is put in `default-major-mode'.)"
  (setq buffer-read-only t)
  (setq mode-name "Help")
  (setq major-mode 'help)
  (setq mode-line-buffer-identification '(" Help:  %b"))
  (use-local-map electric-help-map)
  ;; this is done below in with-electric-help
  ;(run-hooks 'electric-help-mode-hook)
  )

(defun with-electric-help (thunk &optional buffer noerase)
  "Arguments are THUNK &optional BUFFER NOERASE.  BUFFER defaults to \"*Help*\"
THUNK is a function of no arguments which is called to initialize
the contents of BUFFER.  BUFFER will be erased before THUNK is called unless
NOERASE is non-nil.  THUNK will be called with `standard-output' bound to
the buffer specified by BUFFER

After THUNK has been called, this function \"electrically\" pops up a window
in which BUFFER is displayed and allows the user to scroll through that buffer
in electric-help-mode.
When the user exits (with `electric-help-exit', or otherwise) the help
buffer's window disappears (i.e., we use `save-window-excursion')
BUFFER is put into `default-major-mode' (or `fundamental-mode') when we exit"
  (setq buffer (get-buffer-create (or buffer "*Help*")))
  (let ((one (one-window-p t))
	(config (current-window-configuration))
        (bury nil))
    (unwind-protect
         (save-excursion
           (if one (goto-char (window-start (selected-window))))
           (let ((pop-up-windows t))
             (pop-to-buffer buffer))
           (save-excursion
             (set-buffer buffer)
             (electric-help-mode)
             (setq buffer-read-only nil)
             (or noerase (erase-buffer)))
           (let ((standard-output buffer))
             (if (not (funcall thunk))
                 (progn
                   (set-buffer buffer)
                   (set-buffer-modified-p nil)
                   (goto-char (point-min))
                   (if one (shrink-window-if-larger-than-buffer (selected-window))))))
           (set-buffer buffer)
           (run-hooks 'electric-help-mode-hook)
           (if (eq (car-safe (electric-help-command-loop))
                   'retain)
               (setq config (current-window-configuration))
               (setq bury t)))
      (message "")
      (set-buffer buffer)
      (setq buffer-read-only nil)
      (condition-case ()
          (funcall (or default-major-mode 'fundamental-mode))
        (error nil))
      (set-window-configuration config)
      (if bury
          (progn
            ;;>> Perhaps this shouldn't be done.
            ;; so that when we say "Press space to bury" we mean it
            (replace-buffer-in-windows buffer)
            ;; must do this outside of save-window-excursion
            (bury-buffer buffer))))))

(defun electric-help-command-loop ()
  (catch 'exit
    (if (pos-visible-in-window-p (point-max))
	(progn (message "<<< Press Space to bury the help buffer >>>")
	       (if (equal (setq unread-command-events (list (read-event)))
			  '(?\ ))
		   (progn (setq unread-command-events nil)
			  (throw 'exit t)))))
    (let (up down both neither
	  (standard (and (eq (key-binding " ")
			     'scroll-up)
			 (eq (key-binding "\^?")
			     'scroll-down)
			 (eq (key-binding "Q")
			     'electric-help-exit)
			 (eq (key-binding "q")
			     'electric-help-exit))))
      (Electric-command-loop
        'exit
	(function (lambda ()
	  (let ((min (pos-visible-in-window-p (point-min)))
		(max (pos-visible-in-window-p (point-max))))
	    (cond ((and min max)
		   (cond (standard "Press Q to exit ")
			 (neither)
			 (t (setq neither (substitute-command-keys "Press \\[scroll-up] to exit ")))))
		  (min
		   (cond (standard "Press SPC to scroll, Q to exit ")
			 (up)
			 (t (setq up (substitute-command-keys "Press \\[scroll-up] to scroll; \\[electric-help-exit] to exit ")))))
		  (max
		   (cond (standard "Press DEL to scroll back, Q to exit ")
			 (down)
			 (t (setq down (substitute-command-keys "Press \\[scroll-down] to scroll back, \\[scroll-up] to exit ")))))
		  (t
		   (cond (standard "Press SPC to scroll, DEL to scroll back, Q to exit ")
			 (both)
			 (t (setq both (substitute-command-keys "Press \\[scroll-up] to scroll, \\[scroll-down] to scroll back, \\[electric-help-exit] to exit ")))))))))
		    t))))



;(defun electric-help-scroll-up (arg)
;  ">>>Doc"
;  (interactive "P")
;  (if (and (null arg) (pos-visible-in-window-p (point-max)))
;      (electric-help-exit)
;    (scroll-up arg)))

(defun electric-help-exit ()
  ">>>Doc"
  (interactive)
  (throw 'exit t))

(defun electric-help-retain ()
  "Exit `electric-help', retaining the current window/buffer configuration.
\(The *Help* buffer will not be selected, but \\[switch-to-buffer-other-window] RET
will select it.)"
  (interactive)
  (throw 'exit '(retain)))


(defun electric-help-undefined ()
  (interactive)
  (error "%s is undefined -- Press %s to exit"
	 (mapconcat 'single-key-description (this-command-keys) " ")
	 (if (eq (key-binding "Q") 'electric-help-exit)
	     "Q"
	   (substitute-command-keys "\\[electric-help-exit]"))))


;>>> this needs to be hairified (recursive help, anybody?)
(defun electric-help-help ()
  (interactive)
  (if (and (eq (key-binding "Q") 'electric-help-exit)
	   (eq (key-binding " ") 'scroll-up)
	   (eq (key-binding "\^?") 'scroll-down))
      (message "SPC scrolls forward, DEL scrolls back, Q exits and burys help buffer")
    ;; to give something for user to look at while slow substitute-cmd-keys
    ;;  grinds away
    (message "Help...")
    (message "%s" (substitute-command-keys "\\[scroll-up] scrolls forward, \\[scroll-down] scrolls back, \\[electric-help-exit] exits.")))
  (sit-for 2))


(defun electric-helpify (fun)
  (let ((name "*Help*"))
    (if (save-window-excursion
	  ;; kludge-o-rama
	  (let* ((p (symbol-function 'print-help-return-message))
		 (b (get-buffer name))
		 (m (buffer-modified-p b)))
	    (and b (not (get-buffer-window b))
		 (setq b nil))
	    (unwind-protect
		(progn
		  (message "%s..." (capitalize (symbol-name fun)))
		  ;; with-output-to-temp-buffer marks the buffer as unmodified.
		  ;; kludging excessively and relying on that as some sort
		  ;;  of indication leads to the following abomination...
		  ;;>> This would be doable without such icky kludges if either
		  ;;>> (a) there were a function to read the interactive
		  ;;>>     args for a command and return a list of those args.
		  ;;>>     (To which one would then just apply the command)
		  ;;>>     (The only problem with this is that interactive-p
		  ;;>>      would break, but that is such a misfeature in
		  ;;>>      any case that I don't care)
		  ;;>>     It is easy to do this for emacs-lisp functions;
		  ;;>>     the only problem is getting the interactive spec
		  ;;>>     for subrs
		  ;;>> (b) there were a function which returned a
		  ;;>>     modification-tick for a buffer.  One could tell
		  ;;>>     whether a buffer had changed by whether the
		  ;;>>     modification-tick were different.
		  ;;>>     (Presumably there would have to be a way to either
		  ;;>>      restore the tick to some previous value, or to
		  ;;>>      suspend updating of the tick in order to allow
		  ;;>>      things like momentary-string-display)
		  (and b
		       (save-excursion
			 (set-buffer b)
			 (set-buffer-modified-p t)))
		  (fset 'print-help-return-message 'ignore)
		  (call-interactively fun)
		  (and (get-buffer name)
		       (get-buffer-window (get-buffer name))
		       (or (not b)
			   (not (eq b (get-buffer name)))
			   (not (buffer-modified-p b)))))
	      (fset 'print-help-return-message p)
	      (and b (buffer-name b)
		   (save-excursion
		     (set-buffer b)
		     (set-buffer-modified-p m))))))
	(with-electric-help 'ignore name t))))


(defun electric-describe-key ()
  (interactive)
  (electric-helpify 'describe-key))

(defun electric-describe-mode ()
  (interactive)
  (electric-helpify 'describe-mode))

(defun electric-view-lossage ()
  (interactive)
  (electric-helpify 'view-lossage))

;(defun electric-help-for-help ()
;  "See help-for-help"
;  (interactive)
;  )

(defun electric-describe-function ()
  (interactive)
  (electric-helpify 'describe-function))

(defun electric-describe-variable ()
  (interactive)
  (electric-helpify 'describe-variable))

(defun electric-describe-bindings ()
  (interactive)
  (electric-helpify 'describe-bindings))

(defun electric-describe-syntax ()
  (interactive)
  (electric-helpify 'describe-syntax))

(defun electric-command-apropos ()
  (interactive)
  (electric-helpify 'command-apropos))

;(define-key help-map "a" 'electric-command-apropos)



;;;; ehelp-map

(defvar ehelp-map ())
(if ehelp-map
    nil
  (let ((map (copy-keymap help-map))) 
    (substitute-key-definition 'describe-key 'electric-describe-key map)
    (substitute-key-definition 'describe-mode 'electric-describe-mode map)
    (substitute-key-definition 'view-lossage 'electric-view-lossage map)
    (substitute-key-definition 'describe-function 'electric-describe-function map)
    (substitute-key-definition 'describe-variable 'electric-describe-variable map)
    (substitute-key-definition 'describe-bindings 'electric-describe-bindings map)
    (substitute-key-definition 'describe-syntax 'electric-describe-syntax map)

    (setq ehelp-map map)
    (fset 'ehelp-command map)))

;; Do (define-key global-map "\C-h" 'ehelp-command) if you want to win

(provide 'ehelp) 

;;; ehelp.el ends here