Mercurial > emacs
view lisp/kermit.el @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | 507f64624555 |
children | 83f275dcd93a |
line wrap: on
line source
;;; kermit.el --- additions to shell mode for use with kermit, etc. ;; Copyright (C) 1988 Free Software Foundation, Inc. ;; Author: Jeff Norden <jeff@colgate.csnet> ;; Created: 15 Feb 1988 ;; Keywords: comm ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ;;; Commentary: ;; I'm not sure, but I think somebody asked about running kermit under shell ;; mode a while ago. Anyway, here is some code that I find useful. The result ;; is that I can log onto machines with primitive operating systems (VMS and ;; ATT system V :-), and still have the features of shell-mode available for ;; command history, etc. It's also handy to be able to run a file transfer in ;; an emacs window. The transfer is in the "background", but you can also ;; monitor or stop it easily. ;; The ^\ key is bound to a function for sending escape sequences to kermit, ;; and ^C^Q can be used to send any control characters needed thru to the ;; system you connect to. A more serious problem is that some brain-dead ;; systems will not recognize a ^J as an end-of-line character. So LFD is ;; bound to a new function which acts just like CR usually does in shell-mode, ;; but a ^M is sent as an end-of-line. Functions are also provided to swap the ;; bindings of CR and LFD. I've also included a filter which will clean out ;; any ^M's or ^@'s that get typed at you, but I don't really recommend it. ;; There doesn't seem to be an acceptably fast way to do this via emacs-lisp. ;; Invoking kermit by the command " kermit | tr -d '\015' " seems to work ;; better (on my system anyway). ;; Here's how I've been using this setup. We have several machines connected ;; thru a fairly stupid terminal switch. If I want to connect to unix system, ;; then I use the LFD key to talk to the switch, and ignore any ^M's in the ;; buffer, and do a " stty -echo nl " after I log in. Then the only real ;; difference from being in local shell-mode is that you need to type ;; ^C^Q^C to send an interrupt, and ^C^Q^Z for a stop signal, etc. (since ^C^C ;; just generates a local stop signal, which kermit ignores). ;; To connect to a VMS system, I use a shell script to invoke kermit thru the ;; tr filter, do "M-X kermit-send-cr", and then tell VMS that I'm on a ;; half-duplex terminal. ;; Some caveats: ;; 1) Kermit under shell mode is a real pain if you don't have pty's. I ;; recently discovered this on our 3b2/400. When kermit can't find a tty, it ;; assumes it is supposed to be in remote mode. So the simple command "kermit" ;; won't work in shell mode on such a system. You can get around this by using ;; the -c (connect) command line option, which means you also have to specify a ;; line and baud on the command line, as in "kermit -l /dev/tty53 -b 9600 -c". ;; However, this will cause kermit to exit when the connection is closed. So ;; in order to do a file transfer, you have to think ahead and and add -r ;; (receive) to the command line. This means that you can't use the server ;; feature. The only fix I can see is to muck around with the source code for ;; kermit, although this probably wouldn't be too hard. What is needed is an ;; option to force kermit to be local, to use stdin and stdout for interactive ;; speech, and to forget about cbreak mode. ;; Please let me know if any bugs turn up. ;; Feb 1988, Jeff Norden - jeff@colgate.csnet ;;; Code: (require 'shell) (defvar kermit-esc-char "\C-\\" "*Kermit's escape char") (defun kermit-esc () "For sending escape sequences to a kermit running in shell mode." (interactive) (process-send-string (get-buffer-process (current-buffer)) (concat kermit-esc-char (char-to-string (read-char))))) (defun kermit-send-char () "Send an arbitrary character to a program in shell mode." (interactive) (process-send-string (get-buffer-process (current-buffer)) (char-to-string (read-char)))) (define-key shell-mode-map "\C-\\" 'kermit-esc) (define-key shell-mode-map "\C-c\C-q" 'kermit-send-char) ;; extra bindings for folks suffering form ^S/^Q braindamage: (define-key shell-mode-map "\C-c\\" 'kermit-esc) (defun kermit-send-input-cr () "Like \\[comint-send-input] but end the line with carriage-return." (interactive) (comint-send-input) (comint-send-string (get-buffer-process (current-buffer)) "\r")) ;; This is backwards of what makes sense, but ... (define-key shell-mode-map "\n" 'kermit-send-input-cr) (defun kermit-default-cr () "Make RETURN end the line with carriage-return and LFD end it with a newline. This is useful for talking to other systems on which carriage-return is the normal way to end a line." (interactive) (define-key shell-mode-map "\r" 'kermit-send-input-cr) (define-key shell-mode-map "\n" 'comint-send-input)) (defun kermit-default-nl () "Make RETURN end the line with a newline char. This is the default state. In this state, use LFD to send a line and end it with a carriage-return." (interactive) (define-key shell-mode-map "\n" 'kermit-send-input-cr) (define-key shell-mode-map "\r" 'comint-send-input)) (defun kermit-clean-filter (proc str) "Strip ^M and ^@ characters from process output." (save-excursion (let ((beg (process-mark proc))) (set-buffer (process-buffer proc)) (goto-char beg) (insert-before-markers str) (while (re-search-backward "[\r\C-a]+" beg t) (replace-match ""))))) (defun kermit-clean-on () "Delete all null characters and ^M's from the kermit output. Note that another (perhaps better) way to do this is to use the command `kermit | tr -d '\\015''." (interactive) (set-process-filter (get-buffer-process (current-buffer)) 'kermit-clean-filter)) (defun kermit-clean-off () "Cancel a previous kermit-clean-shell-on command." (interactive) (set-process-filter (get-buffer-process (current-buffer)) nil)) ;;; kermit.el ends here