Mercurial > emacs
view lisp/replace.el @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | 847ef9a62e5d |
children | db0c6ed6f145 |
line wrap: on
line source
;;; replace.el --- replace commands for Emacs. ;; Copyright (C) 1985, 1986, 1987, 1992 Free Software Foundation, Inc. ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ;;; Commentary: ;; This package supplies the string and regular-expression replace functions ;; documented in the Emacs user's manual. ;;; Code: (defconst case-replace t "\ *Non-nil means query-replace should preserve case in replacements.") (defvar query-replace-history nil) (defun query-replace-read-args (string) (let (from to) (setq from (read-from-minibuffer (format "%s: " string) nil nil nil 'query-replace-history)) (setq to (read-from-minibuffer (format "%s %s with: " string from) nil nil nil 'query-replace-history)) (list from to current-prefix-arg))) (defun query-replace (from-string to-string &optional arg) "Replace some occurrences of FROM-STRING with TO-STRING. As each match is found, the user must type a character saying what to do with it. For directions, type \\[help-command] at that time. Preserves case in each replacement if case-replace and case-fold-search are non-nil and FROM-STRING has no uppercase letters. Third arg DELIMITED (prefix arg if interactive) non-nil means replace only matches surrounded by word boundaries. To customize possible responses, change the \"bindings\" in `query-replace-map'." (interactive (query-replace-read-args "Query replace")) (perform-replace from-string to-string t nil arg) (or unread-command-events (message "Done"))) (define-key esc-map "%" 'query-replace) (defun query-replace-regexp (regexp to-string &optional arg) "Replace some things after point matching REGEXP with TO-STRING. As each match is found, the user must type a character saying what to do with it. For directions, type \\[help-command] at that time. Preserves case in each replacement if case-replace and case-fold-search are non-nil and REGEXP has no uppercase letters. Third arg DELIMITED (prefix arg if interactive) non-nil means replace only matches surrounded by word boundaries. In TO-STRING, \\& means insert what matched REGEXP, and \\=\\<n> means insert what matched <n>th \\(...\\) in REGEXP." (interactive (query-replace-read-args "Query replace regexp")) (perform-replace regexp to-string t t arg) (or unread-command-events (message "Done"))) (defun map-query-replace-regexp (regexp to-strings &optional arg) "Replace some matches for REGEXP with various strings, in rotation. The second argument TO-STRINGS contains the replacement strings, separated by spaces. This command works like `query-replace-regexp' except that each successive replacement uses the next successive replacement string, wrapping around from the last such string to the first. Non-interactively, TO-STRINGS may be a list of replacement strings. A prefix argument N says to use each replacement string N times before rotating to the next." (interactive (let (from to) (setq from (read-from-minibuffer "Map query replace (regexp): " nil nil nil 'query-replace-history)) (setq to (read-from-minibuffer (format "Query replace %s with (space-separated strings): " from) nil nil nil 'query-replace-history)) (list from to current-prefix-arg))) (let (replacements) (if (listp to-strings) (setq replacements to-strings) (while (/= (length to-strings) 0) (if (string-match " " to-strings) (setq replacements (append replacements (list (substring to-strings 0 (string-match " " to-strings)))) to-strings (substring to-strings (1+ (string-match " " to-strings)))) (setq replacements (append replacements (list to-strings)) to-strings "")))) (perform-replace regexp replacements t t nil arg)) (or unread-command-events (message "Done"))) (defun replace-string (from-string to-string &optional delimited) "Replace occurrences of FROM-STRING with TO-STRING. Preserve case in each match if `case-replace' and `case-fold-search' are non-nil and FROM-STRING has no uppercase letters. Third arg DELIMITED (prefix arg if interactive) non-nil means replace only matches surrounded by word boundaries. This function is usually the wrong thing to use in a Lisp program. What you probably want is a loop like this: (while (search-forward OLD-STRING nil t) (replace-match REPLACEMENT nil t)) which will run faster and will not set the mark or print anything." (interactive (query-replace-read-args "Replace string")) (perform-replace from-string to-string nil nil delimited) (or unread-command-events (message "Done"))) (defun replace-regexp (regexp to-string &optional delimited) "Replace things after point matching REGEXP with TO-STRING. Preserve case in each match if case-replace and case-fold-search are non-nil and REGEXP has no uppercase letters. Third arg DELIMITED (prefix arg if interactive) non-nil means replace only matches surrounded by word boundaries. In TO-STRING, \\& means insert what matched REGEXP, and \\=\\<n> means insert what matched <n>th \\(...\\) in REGEXP. This function is usually the wrong thing to use in a Lisp program. What you probably want is a loop like this: (while (re-search-forward REGEXP nil t) (replace-match REPLACEMENT nil nil)) which will run faster and will not set the mark or print anything." (interactive (query-replace-read-args "Replace regexp")) (perform-replace regexp to-string nil t delimited) (or unread-command-events (message "Done"))) (defvar regexp-history nil "History list for some commands that read regular expressions.") (defalias 'delete-non-matching-lines 'keep-lines) (defun keep-lines (regexp) "Delete all lines except those containing matches for REGEXP. A match split across lines preserves all the lines it lies in. Applies to all lines after point." (interactive (list (read-from-minibuffer "Keep lines (containing match for regexp): " nil nil nil 'regexp-history))) (save-excursion (or (bolp) (forward-line 1)) (let ((start (point))) (while (not (eobp)) ;; Start is first char not preserved by previous match. (if (not (re-search-forward regexp nil 'move)) (delete-region start (point-max)) (let ((end (save-excursion (goto-char (match-beginning 0)) (beginning-of-line) (point)))) ;; Now end is first char preserved by the new match. (if (< start end) (delete-region start end)))) (setq start (save-excursion (forward-line 1) (point))) ;; If the match was empty, avoid matching again at same place. (and (not (eobp)) (= (match-beginning 0) (match-end 0)) (forward-char 1)))))) (defalias 'delete-matching-lines 'flush-lines) (defun flush-lines (regexp) "Delete lines containing matches for REGEXP. If a match is split across lines, all the lines it lies in are deleted. Applies to lines after point." (interactive (list (read-from-minibuffer "Flush lines (containing match for regexp): " nil nil nil 'regexp-history))) (save-excursion (while (and (not (eobp)) (re-search-forward regexp nil t)) (delete-region (save-excursion (goto-char (match-beginning 0)) (beginning-of-line) (point)) (progn (forward-line 1) (point)))))) (defalias 'count-matches 'how-many) (defun how-many (regexp) "Print number of matches for REGEXP following point." (interactive (list (read-from-minibuffer "How many matches for (regexp): " nil nil nil 'regexp-history))) (let ((count 0) opoint) (save-excursion (while (and (not (eobp)) (progn (setq opoint (point)) (re-search-forward regexp nil t))) (if (= opoint (point)) (forward-char 1) (setq count (1+ count)))) (message "%d occurrences" count)))) (defvar occur-mode-map ()) (if occur-mode-map () (setq occur-mode-map (make-sparse-keymap)) (define-key occur-mode-map "\C-c\C-c" 'occur-mode-goto-occurrence)) (defvar occur-buffer nil) (defvar occur-nlines nil) (defvar occur-pos-list nil) (defun occur-mode () "Major mode for output from \\[occur]. Move point to one of the occurrences in this buffer, then use \\[occur-mode-goto-occurrence] to go to the same occurrence in the buffer that the occurrences were found in. \\{occur-mode-map}" (kill-all-local-variables) (use-local-map occur-mode-map) (setq major-mode 'occur-mode) (setq mode-name "Occur") (make-local-variable 'occur-buffer) (make-local-variable 'occur-nlines) (make-local-variable 'occur-pos-list)) (defun occur-mode-goto-occurrence () "Go to the line this occurrence was found in, in the buffer it was found in." (interactive) (if (or (null occur-buffer) (null (buffer-name occur-buffer))) (progn (setq occur-buffer nil occur-pos-list nil) (error "Buffer in which occurrences were found is deleted"))) (let* ((occur-number (save-excursion (beginning-of-line) (/ (1- (count-lines (point-min) (save-excursion (beginning-of-line) (point)))) (cond ((< occur-nlines 0) (- 2 occur-nlines)) ((> occur-nlines 0) (+ 2 (* 2 occur-nlines))) (t 1))))) (pos (nth occur-number occur-pos-list))) (or pos (error "No occurrence on this line")) (pop-to-buffer occur-buffer) (goto-char (marker-position pos)))) (defvar list-matching-lines-default-context-lines 0 "*Default number of context lines to include around a `list-matching-lines' match. A negative number means to include that many lines before the match. A positive number means to include that many lines both before and after.") (defalias 'list-matching-lines 'occur) (defun occur (regexp &optional nlines) "Show all lines in the current buffer containing a match for REGEXP. If a match spreads across multiple lines, all those lines are shown. Each line is displayed with NLINES lines before and after, or -NLINES before if NLINES is negative. NLINES defaults to `list-matching-lines-default-context-lines'. Interactively it is the prefix arg. The lines are shown in a buffer named `*Occur*'. It serves as a menu to find any of the occurrences in this buffer. \\[describe-mode] in that buffer will explain how." (interactive (list (let* ((default (car regexp-history)) (input (read-from-minibuffer (if default (format "List lines matching regexp (default `%s'): " default) "List lines matching regexp: ") nil nil nil 'regexp-history))) (if (> (length input) 0) input (setcar regexp-history default))) current-prefix-arg)) (setq nlines (if nlines (prefix-numeric-value nlines) list-matching-lines-default-context-lines)) (let ((first t) (buffer (current-buffer)) (linenum 1) (prevpos (point-min)) (final-context-start (make-marker))) ;;; (save-excursion ;;; (beginning-of-line) ;;; (setq linenum (1+ (count-lines (point-min) (point)))) ;;; (setq prevpos (point))) (with-output-to-temp-buffer "*Occur*" (save-excursion (set-buffer standard-output) (insert "Lines matching ") (prin1 regexp) (insert " in buffer " (buffer-name buffer) ?. ?\n) (occur-mode) (setq occur-buffer buffer) (setq occur-nlines nlines) (setq occur-pos-list ())) (if (eq buffer standard-output) (goto-char (point-max))) (save-excursion (beginning-of-buffer) ;; Find next match, but give up if prev match was at end of buffer. (while (and (not (= prevpos (point-max))) (re-search-forward regexp nil t)) (goto-char (match-beginning 0)) (beginning-of-line) (save-match-data (setq linenum (+ linenum (count-lines prevpos (point))))) (setq prevpos (point)) (goto-char (match-end 0)) (let* ((start (save-excursion (goto-char (match-beginning 0)) (forward-line (if (< nlines 0) nlines (- nlines))) (point))) (end (save-excursion (goto-char (match-end 0)) (if (> nlines 0) (forward-line (1+ nlines)) (forward-line 1)) (point))) (tag (format "%3d" linenum)) (empty (make-string (length tag) ?\ )) tem) (save-excursion (setq tem (make-marker)) (set-marker tem (point)) (set-buffer standard-output) (setq occur-pos-list (cons tem occur-pos-list)) (or first (zerop nlines) (insert "--------\n")) (setq first nil) (insert-buffer-substring buffer start end) (backward-char (- end start)) (setq tem nlines) (while (> tem 0) (insert empty ?:) (forward-line 1) (setq tem (1- tem))) (let ((this-linenum linenum)) (set-marker final-context-start (+ (point) (- (match-end 0) (match-beginning 0)))) (while (< (point) final-context-start) (if (null tag) (setq tag (format "%3d" this-linenum))) (insert tag ?:) (setq tag nil) (forward-line 1) (setq this-linenum (1+ this-linenum)))) (while (< tem nlines) (insert empty ?:) (forward-line 1) (setq tem (1+ tem)))) (forward-line 1))) (set-buffer standard-output) ;; Put positions in increasing order to go with buffer. (setq occur-pos-list (nreverse occur-pos-list)) (if (interactive-p) (message "%d matching lines." (length occur-pos-list))))))) ;; It would be nice to use \\[...], but there is no reasonable way ;; to make that display both SPC and Y. (defconst query-replace-help "Type Space or `y' to replace one match, Delete or `n' to skip to next, ESC or `q' to exit, Period to replace one match and exit, Comma to replace but not move point immediately, C-r to enter recursive edit (\\[exit-recursive-edit] to get out again), C-w to delete match and recursive edit, C-l to clear the screen, redisplay, and offer same replacement again, ! to replace all remaining matches with no more questions, ^ to move point back to previous match." "Help message while in query-replace") (defvar query-replace-map (make-sparse-keymap) "Keymap that defines the responses to questions in `query-replace'. The \"bindings\" in this map are not commands; they are answers. The valid answers include `act', `skip', `act-and-show', `exit', `act-and-exit', `edit', `delete-and-edit', `recenter', `automatic', `backup', and `help'.") (define-key query-replace-map " " 'act) (define-key query-replace-map "\d" 'skip) (define-key query-replace-map [delete] 'skip) (define-key query-replace-map [backspace] 'skip) (define-key query-replace-map "y" 'act) (define-key query-replace-map "n" 'skip) (define-key query-replace-map "," 'act-and-show) (define-key query-replace-map "\e" 'exit) (define-key query-replace-map [escape] 'exit) (define-key query-replace-map "q" 'exit) (define-key query-replace-map "\r" 'exit) (define-key query-replace-map [return] 'exit) (define-key query-replace-map "." 'act-and-exit) (define-key query-replace-map "\C-r" 'edit) (define-key query-replace-map "\C-w" 'delete-and-edit) (define-key query-replace-map "\C-l" 'recenter) (define-key query-replace-map "!" 'automatic) (define-key query-replace-map "^" 'backup) (define-key query-replace-map "\C-h" 'help) (define-key query-replace-map "?" 'help) (define-key query-replace-map "\C-g" 'quit) (define-key query-replace-map "\C-]" 'quit) (defun perform-replace (from-string replacements query-flag regexp-flag delimited-flag &optional repeat-count map) "Subroutine of `query-replace'. Its complexity handles interactive queries. Don't use this in your own program unless you want to query and set the mark just as `query-replace' does. Instead, write a simple loop like this: (while (re-search-forward \"foo[ \t]+bar\" nil t) (replace-match \"foobar\" nil nil)) which will run faster and do exactly what you probably want." (or map (setq map query-replace-map)) (let ((nocasify (not (and case-fold-search case-replace (string-equal from-string (downcase from-string))))) (literal (not regexp-flag)) (search-function (if regexp-flag 're-search-forward 'search-forward)) (search-string from-string) (real-match-data nil) ; the match data for the current match (next-replacement nil) (replacement-index 0) (keep-going t) (stack nil) (next-rotate-count 0) (replace-count 0) (lastrepl nil) ;Position after last match considered. (match-again t)) (if (stringp replacements) (setq next-replacement replacements) (or repeat-count (setq repeat-count 1))) (if delimited-flag (setq search-function 're-search-forward search-string (concat "\\b" (if regexp-flag from-string (regexp-quote from-string)) "\\b"))) (push-mark) (undo-boundary) ;; Loop finding occurrences that perhaps should be replaced. (while (and keep-going (not (eobp)) (funcall search-function search-string nil t) ;; If the search string matches immediately after ;; the previous match, but it did not match there ;; before the replacement was done, ignore the match. (if (or (eq lastrepl (point)) (and regexp-flag (eq lastrepl (match-beginning 0)) (not match-again))) (if (eobp) nil ;; Don't replace the null string ;; right after end of previous replacement. (forward-char 1) (funcall search-function search-string nil t)) t)) ;; Save the data associated with the real match. (setq real-match-data (match-data)) ;; Before we make the replacement, decide whether the search string ;; can match again just after this match. (if regexp-flag (setq match-again (looking-at search-string))) ;; If time for a change, advance to next replacement string. (if (and (listp replacements) (= next-rotate-count replace-count)) (progn (setq next-rotate-count (+ next-rotate-count repeat-count)) (setq next-replacement (nth replacement-index replacements)) (setq replacement-index (% (1+ replacement-index) (length replacements))))) (if (not query-flag) (progn (store-match-data real-match-data) (replace-match next-replacement nocasify literal) (setq replace-count (1+ replace-count))) (undo-boundary) (let (done replaced key def) ;; Loop reading commands until one of them sets done, ;; which means it has finished handling this occurrence. (while (not done) (message "Query replacing %s with %s: " from-string next-replacement) (setq key (read-event)) (setq key (vector key)) (setq def (lookup-key map key)) ;; Restore the match data while we process the command. (store-match-data real-match-data) (cond ((eq def 'help) (with-output-to-temp-buffer "*Help*" (princ (concat "Query replacing " (if regexp-flag "regexp " "") from-string " with " next-replacement ".\n\n" (substitute-command-keys query-replace-help))))) ((eq def 'exit) (setq keep-going nil) (setq done t)) ((eq def 'backup) (let ((elt (car stack))) (goto-char (car elt)) (setq replaced (eq t (cdr elt))) (or replaced (store-match-data (cdr elt))) (setq stack (cdr stack)))) ((eq def 'act) (or replaced (replace-match next-replacement nocasify literal)) (setq done t replaced t)) ((eq def 'act-and-exit) (or replaced (replace-match next-replacement nocasify literal)) (setq keep-going nil) (setq done t replaced t)) ((eq def 'act-and-show) (if (not replaced) (progn (replace-match next-replacement nocasify literal) (setq replaced t)))) ((eq def 'automatic) (or replaced (replace-match next-replacement nocasify literal)) (setq done t query-flag nil replaced t)) ((eq def 'skip) (setq done t)) ((eq def 'recenter) (recenter nil)) ((eq def 'edit) (store-match-data (prog1 (match-data) (save-excursion (recursive-edit)))) ;; Before we make the replacement, ;; decide whether the search string ;; can match again just after this match. (if regexp-flag (setq match-again (looking-at search-string)))) ((eq def 'delete-and-edit) (delete-region (match-beginning 0) (match-end 0)) (store-match-data (prog1 (match-data) (save-excursion (recursive-edit)))) (setq replaced t)) (t (setq keep-going nil) (setq unread-command-events (append (listify-key-sequence key) unread-command-events)) (setq done t)))) ;; Record previous position for ^ when we move on. ;; Change markers to numbers in the match data ;; since lots of markers slow down editing. (setq stack (cons (cons (point) (or replaced (mapcar (function (lambda (elt) (and elt (marker-position elt)))) (match-data)))) stack)) (if replaced (setq replace-count (1+ replace-count))))) (setq lastrepl (point))) (and keep-going stack))) ;;; replace.el ends here