Mercurial > emacs
view lisp/resume.el @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | 62b0d90a62e8 |
children | ad1c04ef7695 |
line wrap: on
line source
;;; resume.el --- process command line args from within a suspended Emacs job ;; Copyright (C) 1992 Free Software Foundation, Inc. ;; Author: Joe Wells <jbw@bucsf.bu.edu> ;; Adapted-By: ESR ;; Keywords: processes ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 1, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ;;; Commentary: ;; Theory: the first time you start Emacs, command line arguments are ;; handled normally. Then, you suspend your emacs job. When you want to edit ;; something else, you type "emacs filename" as usual, but instead of ;; starting a new emacs job, the old job is resumed instead, and the command ;; line arguments are placed in a file where the old emacs job looks for ;; them. ;; Stephan Gildea suggested bug fix (gildea@bbn.com). ;; Ideas from Michael DeCorte and other people. ;; For csh users, insert the following alias in your .cshrc file ;; (after removing the leading double semicolons, of course): ;; ;;# The following line could be just EMACS_CMD=emacs, but this depends on ;;# your site. ;;if (! $?EMACS_CMD) set EMACS_CMD=emacs ;;set JOBS_FILE=/tmp/jobs.$USER.$$ ;;set ARGS_FILE=~/.emacs_args ;;set STOP_PATT='^\[[0-9]*\] *[ +-] Stopped ............ ' ;;set SUNVIEW_CMD='emacstool -nw -f emacstool-init -f server-start' ;;set X_CMD=\'\''$EMACS_CMD -i -f server-start' ;;alias emacs \ ;;' \\ ;; jobs >! "$JOBS_FILE" \\ ;; && grep "$STOP_PATT$EMACS_CMD" "$JOBS_FILE" >& /dev/null \\ ;; && echo `pwd` \!* >! "$ARGS_FILE" && ""fg %$EMACS_CMD \\ ;;|| if (! -e ~/.emacs_server || -f ~/.emacs_server) set status=1 \\ ;; && emacsclient \!* \\ ;;|| @ status=1 - $?DISPLAY && eval "$X_CMD -i \!* &" \\ ;;|| @ status=1 - $?WINDOW_PARENT && eval "$SUNVIEW_CMD \!* &" \\ ;;|| ""$EMACS_CMD -nw \!* \\ ;;' ;; ;; The alias works as follows: ;; 1. If there is a suspended Emacs job that is a child of the ;; current shell, place its arguments in the ~/.emacs_args file and ;; resume it. ;; 2. Else if the ~/.emacs_server socket has been created, presume an ;; Emacs server is running and attempt to connect to it. If no Emacs ;; server is listening on the socket, this will fail. ;; 3. Else if the DISPLAY environment variable is set, presume we are ;; running under X Windows and start a new GNU Emacs process in the ;; background as an X client. ;; 4. Else if the WINDOW_PARENT environment variable is set, presume we ;; are running under SunView and start an emacstool process in the ;; background. ;; 5. Else start a regular Emacs process. ;; ;; Notes: ;; The output of the "jobs" command is not piped directly into "grep" ;; because that would run the "jobs" command in a subshell. ;; Before resuming a suspended emacs, the current directory and all ;; command line arguments are placed in a file name ~/.emacs_args. ;; The "-nw" switch to Emacs means no windowing system. ;; Insert this in your .emacs file: ;;(add-hook 'suspend-hook 'resume-suspend-hook) ;; Finally, put the rest in a file named "resume.el" in a lisp library ;; directory. ;;; Code: (defvar resume-emacs-args-file (expand-file-name "~/.emacs_args") "*This file is where arguments are placed for a suspended emacs job.") (defvar resume-emacs-args-buffer " *Command Line Args*" "Buffer that is used by resume-process-args.") (defun resume-process-args () "Handler for command line args given when Emacs is resumed." (let ((start-buffer (current-buffer)) (args-buffer (get-buffer-create resume-emacs-args-buffer)) length args) (unwind-protect (progn (set-buffer args-buffer) (erase-buffer) ;; get the contents of resume-emacs-args-file (condition-case () (let ((result (insert-file-contents resume-emacs-args-file))) (setq length (car (cdr result)))) ;; the file doesn't exist, ergo no arguments (file-error (erase-buffer) (setq length 0))) (if (<= length 0) (setq args nil) ;; get the arguments from the buffer (goto-char (point-min)) (while (not (eobp)) (skip-chars-forward " \t\n") (let ((begin (point))) (skip-chars-forward "^ \t\n") (setq args (cons (buffer-substring begin (point)) args))) (skip-chars-forward " \t\n")) ;; arguments are now in reverse order (setq args (nreverse args)) ;; make sure they're not read again (erase-buffer)) (resume-write-buffer-to-file (current-buffer) resume-emacs-args-file) ;; if nothing was in buffer, args will be null (or (null args) (setq default-directory (file-name-as-directory (car args)) args (cdr args))) ;; actually process the arguments (command-line-1 args)) ;; If the command line args don't result in a find-file, the ;; buffer will be left in args-buffer. So we change back to the ;; original buffer. The reason I don't just use ;; (let ((default-directory foo)) ;; (command-line-1 args)) ;; in the context of the original buffer is because let does not ;; work properly with buffer-local variables. (if (eq (current-buffer) args-buffer) (set-buffer start-buffer))))) ;;;###autoload (defun resume-suspend-hook () "Clear out the file used for transmitting args when Emacs resumes." (save-excursion (set-buffer (get-buffer-create resume-emacs-args-buffer)) (erase-buffer) (resume-write-buffer-to-file (current-buffer) resume-emacs-args-file))) (defun resume-write-buffer-to-file (buffer file) "Writes the contents of BUFFER into FILE, if permissions allow." (if (not (file-writable-p file)) (error "No permission to write file %s" file)) (save-excursion (set-buffer buffer) (clear-visited-file-modtime) (save-restriction (widen) (write-region (point-min) (point-max) file nil 'quiet)) (set-buffer-modified-p nil))) ;;; resume.el ends here