Mercurial > emacs
view lisp/telnet.el @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | 09240675dd40 |
children | 2d8ae66d6906 |
line wrap: on
line source
;;; telnet.el --- run a telnet session from within an Emacs buffer ;;; Copyright (C) 1985, 1988, 1992 Free Software Foundation, Inc. ;; Author: William F. Schelter ;; Maintainer: FSF ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ;;; Commentary: ;; This mode is intended to be used for telnet or rsh to a remode host; ;; `telnet' and `rsh' are the two entry points. Multiple telnet or rsh ;; sessions are supported. ;; ;; Normally, input is sent to the remote telnet/rsh line-by-line, as you ;; type RET or LFD. C-c C-c sends a C-c to the remote immediately; ;; C-c C-z sends C-z immediately. C-c C-q followed by any character ;; sends that character immediately. ;; ;; All RET characters are filtered out of the output coming back from the ;; remote system. The mode tries to do other useful translations based ;; on what it sees coming back from the other system before the password ;; query. It knows about UNIX, ITS, TOPS-20 and Explorer systems. ;;; Code: ;; to do fix software types for lispm: ;; to eval current expression. Also to try to send escape keys correctly. ;; essentially we'll want the rubout-handler off. ;; filter is simplistic but should be okay for typical shell usage. ;; needs hacking if it is going to deal with asynchronous output in a sane ;; manner (require 'comint) (defvar telnet-new-line "\r") (defvar telnet-mode-map nil) (defvar telnet-prompt-pattern "^[^#$%>]*[#$%>] *") (defvar telnet-replace-c-g nil) (make-variable-buffer-local (defvar telnet-remote-echoes t "True if the telnet process will echo input.")) (make-variable-buffer-local (defvar telnet-interrupt-string "\C-c" "String sent by C-c.")) (defvar telnet-count 0 "Number of output strings read from the telnet process while looking for the initial password.") (defvar telnet-initial-count -50 "Initial value of `telnet-count'. Should be set to the negative of the number of terminal writes telnet will make setting up the host connection.") (defvar telnet-maximum-count 4 "Maximum value `telnet-count' can have. After this many passes, we stop looking for initial setup data. Should be set to the number of terminal writes telnet will make rejecting one login and prompting for the again for a username and password.") (defun telnet-interrupt-subjob () (interactive) "Interrupt the program running through telnet on the remote host." (send-string nil telnet-interrupt-string)) (defun telnet-c-z () (interactive) (send-string nil "\C-z")) (defun send-process-next-char () (interactive) (send-string nil (char-to-string (let ((inhibit-quit t)) (prog1 (read-char) (setq quit-flag nil)))))) ; initialization on first load. (if telnet-mode-map nil (setq telnet-mode-map (copy-keymap comint-mode-map)) (define-key telnet-mode-map "\C-m" 'telnet-send-input) ; (define-key telnet-mode-map "\C-j" 'telnet-send-input) (define-key telnet-mode-map "\C-c\C-q" 'send-process-next-char) (define-key telnet-mode-map "\C-c\C-c" 'telnet-interrupt-subjob) (define-key telnet-mode-map "\C-c\C-z" 'telnet-c-z)) ;;maybe should have a flag for when have found type (defun telnet-check-software-type-initialize (string) "Tries to put correct initializations in. Needs work." (let ((case-fold-search t)) (cond ((string-match "unix" string) (setq telnet-prompt-pattern comint-prompt-regexp) (setq telnet-new-line "\n")) ((string-match "tops-20" string) ;;maybe add telnet-replace-c-g (setq telnet-prompt-pattern "[@>]*")) ((string-match "its" string) (setq telnet-prompt-pattern "^[^*>]*[*>] *")) ((string-match "explorer" string) ;;explorer telnet needs work (setq telnet-replace-c-g ?\n)))) (setq comint-prompt-regexp telnet-prompt-pattern)) (defun telnet-initial-filter (proc string) ;For reading up to and including password; also will get machine type. (cond ((string-match "No such host" string) (kill-buffer (process-buffer proc)) (error "No such host.")) ((string-match "passw" string) (telnet-filter proc string) (let* ((echo-keystrokes 0) (password (read-password))) (setq telnet-count 0) (send-string proc (concat password telnet-new-line)))) (t (telnet-check-software-type-initialize string) (telnet-filter proc string) (cond ((> telnet-count telnet-maximum-count) (set-process-filter proc 'telnet-filter)) (t (setq telnet-count (1+ telnet-count))))))) ;; Identical to comint-simple-send, except that it sends telnet-new-line ;; instead of "\n". (defun telnet-simple-send (proc string) (comint-send-string proc string) (comint-send-string proc telnet-new-line)) (defun telnet-filter (proc string) (let ((at-end (and (eq (process-buffer proc) (current-buffer)) (= (point) (point-max))))) (save-excursion (set-buffer (process-buffer proc)) (goto-char (process-mark proc)) (let ((now (point))) ;; Insert STRING, omitting all C-m characters. (let ((index 0) c-m) (while (setq c-m (string-match "\C-m" string index)) (insert-before-markers (substring string index c-m)) (setq index (1+ c-m))) (insert-before-markers (substring string index))) (and telnet-replace-c-g (subst-char-in-region now (point) ?\C-g telnet-replace-c-g))) ; (if (and (integer-or-marker-p last-input-start) ; (marker-position last-input-start) ; telnet-remote-echoes) ; (delete-region last-input-start last-input-end)) ) (if at-end (goto-char (point-max))))) (defun telnet-send-input () (interactive) ; (comint-send-input telnet-new-line telnet-remote-echoes) (comint-send-input) (if telnet-remote-echoes (delete-region comint-last-input-start comint-last-input-end))) ;;;###autoload (defun telnet (host) "Open a network login connection to host named HOST (a string). Communication with HOST is recorded in a buffer *HOST-telnet*. Normally input is edited in Emacs and sent a line at a time." (interactive "sOpen telnet connection to host: ") (let* ((name (concat host "-telnet" )) (buffer (get-buffer (concat "*" name "*")))) (if (and buffer (get-buffer-process buffer)) (switch-to-buffer (concat "*" name "*")) (switch-to-buffer (make-comint name "telnet")) (set-process-filter (get-process name) 'telnet-initial-filter) ;; Don't send the `open' cmd till telnet is ready for it. (accept-process-output (get-process name)) (erase-buffer) (send-string name (concat "open " host "\n")) (telnet-mode) (setq comint-input-sender 'telnet-simple-send) (setq telnet-count telnet-initial-count)))) (defun telnet-mode () "This mode is for using telnet (or rsh) from a buffer to another host. It has most of the same commands as comint-mode. There is a variable ``telnet-interrupt-string'' which is the character sent to try to stop execution of a job on the remote host. Data is sent to the remote host when RET is typed. \\{telnet-mode-map} " (interactive) (comint-mode) (setq major-mode 'telnet-mode mode-name "Telnet" comint-prompt-regexp telnet-prompt-pattern) (use-local-map telnet-mode-map) (run-hooks 'telnet-mode-hook)) ;;;###autoload (defun rsh (host) "Open a network login connection to host named HOST (a string). Communication with HOST is recorded in a buffer *HOST-rsh*. Normally input is edited in Emacs and sent a line at a time." (interactive "sOpen rsh connection to host: ") (require 'shell) (let ((name (concat host "-rsh" ))) (switch-to-buffer (make-comint name "rsh" nil host)) (set-process-filter (get-process name) 'telnet-initial-filter) (telnet-mode) (setq telnet-count -16))) (defun read-password () (let ((answ "") tem) (message "Reading password...") (while (prog1 (not (memq (setq tem (read-char)) '(?\C-m ?\n ?\C-g))) (setq quit-flag nil)) (setq answ (concat answ (char-to-string tem)))) answ)) (provide 'telnet) ;;; telnet.el ends here