Mercurial > emacs
view src/config.in @ 4872:628cbf7e7005
(comint-after-partial-file-name-command):
Renamed from comint-after-partial-pathname-command.
(comint-match-partial-file-name, comint-after-partial-file-name):
Renamed from comint-match-partial-pathname, etc.
(comint-last-output-start): New variable to record
where most recent process output started from.
(comint-mode): Initialise it.
(comint-output-filter): Set it.
(comint-previous-matching-input-string): Moved to
comint-previous-matching-input-position.
(comint-previous-matching-input-string): Use it.
(comint-search-arg, comint-search-start,
comint-previous-input-string): New subroutines.
(comint-previous-input, comint-next-input,
comint-previous-matching-input, comint-next-matching-input,
comint-previous-matching-input-from-input,
comint-next-matching-input-from-input): Use them.
(comint-mode-map): Added signal menu-bar. Moved
comint-backward/forward-matching-input to output menu-bar, since
they move within the buffer rather than do input.
(comint-send-input, comint-after-pmark-p,
comint-kill-input, comint-proc-query): Removed serialisation of
obtaining the process mark's marker-position.
Commented out comint-load-hooks.
(comint-dynamic-simple-complete): New subroutine.
(comint-dynamic-complete-filename-command): New variable.
(comint-after-partial-pathname-command): New variable.
(comint-after-partial-pathname): New subroutine.
(comint-dynamic-complete): Use them.
(comint-mode): Make them local.
Renamed comint-dynamic-complete-command to
comint-dynamic-complete-command-command for consistency.
Renamed comint-file-name-addsuffix/autolist/recexact to
comint-completion-addsuffix/autolist/recexact for consistency.
(comint-replace-by-expanded-history): Check if input
ring size is not big enough for relative reference.
(comint-read-input-ring, comint-input-ring-file-name):
From shell.el.
(shell-write-input-ring): New subroutine.
(comint-file-name-prefix): New variable.
(comint-directory): New inline subroutine.
(comint-dynamic-complete-filename, comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Use it.
(comint-dynamic-complete-filename,
comint-dynamic-complete-variable,
comint-dynamic-list-filename-completions): Make sure local
completion-ignore-case is nil.
(comint-next-prompt, comint-previous-prompt): Use
paragraph-start and paragraph motion commands rather than
re-search-forward and re-search-backward commands.
(comint-dynamic-list-input-ring,
comint-previous-matching-input-string): Use ring-empty-p rather
than zerop and ring-length.
(comint-input-ignoredups): New variable.
(comint-send-input, shell-read-input-ring): Use it.
(comint-mode): Make comint-input-ignoredups local. Doc fix.
(comint-scroll-to-bottom-on-input): New variable.
(comint-scroll-to-bottom-on-output): New variable.
(comint-scroll-show-maximum-output): New variable.
(comint-output-filter-hook): New variable, defaults to
comint-postoutput-scroll-to-bottom.
(comint-output-filter): Renamed from comint-filter
for consistency. Now calls comint-output-filter-hook.
(comint-preinput-scroll-to-bottom): New subroutine.
(comint-postoutput-scroll-to-bottom): New subroutine.
(comint-show-maximum-output): New command.
(comint-copy-old-input): New command.
(comint-send-input): Run comint-output-filter-hook if
necessary as a kludge to prevent messy redisplays.
(comint-mode-map): Added comint-show-maximum-output to
C-c C-e and menu-bar output, and comint-copy-old-input to C-c C-i
and menu-bar input.
(comint-mode): Make local variables
comint-scroll-to-bottom-on-input, before-change-function,
comint-scroll-to-bottom-on-output, comint-scroll-show-maximum-output,
and comint-output-filter-hook.
(comint-version): Deleted--no need for separate version.
(comint-input-ring-index): Make this a permanent local.
(comint-mode): Don't alter comint-input-ring-index or comint-input-ring
if already set meaningfully.
(comint-mode-map): Added keys M-R/S for
comint-previous/next-matching-input-from-input and to completion
menu-bar. Added comint-forward/backward-matching-input and
comint-previous/next-matching-input to completion menu-bar.
(comint-mode): Doc fix for functionality.
(comint-exec-1): Uses setenv.
(comint-update-env): Removed.
(comint-input-ring-size): Incremented to 32, as with
command history.
(comint-dynamic-list-input-ring): Check for zero
length ring. Use ring length, not ring size, when generating
list. Use buffer " *Input History*".
(comint-previous-matching-input-string): Check for zero-length ring.
Check last item in case at end of cycle and it's a match.
(comint-searching-input-ring): New subroutine.
(comint-regexp-arg): New subroutine.
(comint-previous-matching-input-from-input): New command.
(comint-next-matching-input-from-input): New command.
(comint-replace-by-expanded-history): Fix for matching
inside quotes. Fix to allow argument subrange specifiers. Fix to
identify and reject absolute input number references.
(comint-within-quotes): New subroutine.
(comint-how-many-region): New subroutine.
(comint-args): New subroutine.
(comint-delim-arg): New subroutine.
(comint-arguments): New subroutine.
(comint-delimiter-argument-list): New variable.
(comint-send-input): Inserts input arguments into ring
separated by single spaces.
(comint-filter): Checks the buffer's process to make
sure it's still there. Otherwise, set-buffer will fail.
(comint-backward-matching-input): New command.
(comint-forward-matching-input): New command.
(comint-next-prompt, comint-previous-prompt):
Error if reach beg/end of buffer.
(comint-dynamic-complete): Fix for absolute input
number references.
(comint-dynamic-complete-filename): Changed listings
function to comint-dynamic-list-filename-completions. Uses
file-directory-p rather than string-match to test for directories.
(comint-dynamic-list-completions): Changed to list the
list of completions supplied as the function argument. Use buffer
" *Completions*".
(comint-match-partial-pathname): New subroutine.
(comint-dynamic-complete-variable): New command.
(comint-dynamic-list-filename-completions): New function.
(comint-previous-input):
Don't use replace-match; just insert before deleting.
(comint-magic-space): Use self-insert command.
(comint-history-file-name): New variable.
(comint-mode): Initialize comint-input-ring before
running comint-mode-hook.
(comint-input-autoexpand): New variable.
(comint-dynamic-complete-command): New variable.
(comint-get-current-command): New variable.
(comint-read-input-ring): New function.
(comint-send-input): Handle history expansion.
(comint-input-sentinel): Doc fix.
(comint-mode-map): Added key binding for C-c C-h.
Added menu bars for completion, input and output.
(comint-dynamic-list-input-ring): New function.
(comint-previous-input-string): New subroutine.
(comint-previous-input): Use it.
(comint-previous-matching-input-string): New subroutine.
(comint-previous-matching-input): Use it.
(comint-replace-by-expanded-history): New command.
(comint-magic-space): New command.
(comint-replace-by-expanded-filename): Now replaces
expanded match for a filename, and then calls filename completion
comint-dynamic-complete-filename to do file name completion.
(comint-kill-output): Don't kill prompt.
(comint-show-output): Don't move point if it's
visible where it is, and if point is moved, put it after prompt.
(comint-dynamic-complete): Totally new definition.
(comint-dynamic-complete-filename): New name for old
function comint-dynamic-complete, completes files and lists
candidates, souped up for configurability.
(comint-dynamic-complete-variable): New command.
(comint-file-name-autolist): New variable.
(comint-file-name-addsuffix): New variable,
(comint-file-name-recexact): New variable.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Fri, 22 Oct 1993 02:57:36 +0000 |
parents | f05c414fe229 |
children | 8ba91b53e9a5 |
line wrap: on
line source
/* GNU Emacs site configuration template file. -*- C -*- Copyright (C) 1988, 1993 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone for the consequences of using it or for whether it serves any particular purpose or works at all, unless he says so in writing. Refer to the GNU Emacs General Public License for full details. Everyone is granted permission to copy, modify and redistribute GNU Emacs, but only under the conditions described in the GNU Emacs General Public License. A copy of this license is supposed to have been given to you along with GNU Emacs so you can know your rights and responsibilities. It should be in a file named COPYING. Among other things, the copyright notice and this notice must be preserved on all copies. */ /* No code in Emacs #includes config.h twice, but some of the code intended to work with other packages as well (like gmalloc.c) think they can include it as many times as they like. */ #ifndef EMACS_CONFIG_H #define EMACS_CONFIG_H /* These are all defined in the top-level Makefile by configure. They're here only for reference. */ /* Define LISP_FLOAT_TYPE if you want emacs to support floating-point numbers. */ #undef LISP_FLOAT_TYPE /* Define GNU_MALLOC if you want to use the *new* GNU memory allocator. */ #undef GNU_MALLOC /* Define REL_ALLOC if you want to use the relocating allocator for buffer space. */ #undef REL_ALLOC /* Define HAVE_X_WINDOWS if you want to use the X window system. */ #undef HAVE_X_WINDOWS /* Define HAVE_X11 if you want to use version 11 of X windows. Otherwise, Emacs expects to use version 10. */ #undef HAVE_X11 /* Define this if you're using XFree386. */ #undef HAVE_XFREE386 /* Define HAVE_X_MENU if you want to use the X window menu system. This appears to work on some machines that support X and not on others. */ #undef HAVE_X_MENU /* If we're using any sort of window system, define MULTI_FRAME. */ #ifdef HAVE_X_WINDOWS #define MULTI_FRAME #endif /* Define USE_TEXT_PROPERTIES to support visual and other properties on text. */ #define USE_TEXT_PROPERTIES /* Define USER_FULL_NAME to return a string that is the user's full name. It can assume that the variable `pw' points to the password file entry for this user. At some sites, the pw_gecos field contains the user's full name. If neither this nor any other field contains the right thing, use pw_name, giving the user's login name, since that is better than nothing. */ #define USER_FULL_NAME pw->pw_gecos /* Define AMPERSAND_FULL_NAME if you use the convention that & in the full name stands for the login id. */ #undef AMPERSAND_FULL_NAME /* Some things figured out by the configure script, grouped as they are in configure.in. */ #undef HAVE_SYS_TIMEB_H #undef HAVE_SYS_TIME_H #undef STDC_HEADERS #undef TIME_WITH_SYS_TIME #undef HAVE_LIBDNET #undef HAVE_ALLOCA_H #undef HAVE_GETTIMEOFDAY #undef HAVE_GETHOSTNAME #undef HAVE_DUP2 #undef HAVE_RENAME #undef HAVE_CLOSEDIR #undef TM_IN_SYS_TIME #undef HAVE_TM_ZONE #undef HAVE_TZNAME #undef const #undef HAVE_LONG_FILE_NAMES #undef CRAY_STACKSEG_END #undef STACK_DIRECTION #undef UNEXEC_SRC #undef HAVE_LIBXBSD #undef HAVE_XRMSETDATABASE #undef HAVE_XSCREENRESOURCESTRING #undef HAVE_XSCREENNUMBEROFSCREEN #undef HAVE_MKDIR #undef HAVE_RMDIR #undef HAVE_RANDOM #undef HAVE_BCOPY #undef HAVE_LOGB #undef HAVE_FREXP #undef HAVE_FTIME #undef HAVE_RES_INIT /* For -lresolv on Suns. */ #undef HAVE_AIX_SMT_EXP /* If using GNU, then support inline function declarations. */ #ifdef __GNUC__ #define INLINE __inline__ #else #define INLINE #endif /* The configuration script defines opsysfile to be the name of the s/*.h file that describes the system type you are using. The file is chosen based on the configuration name you give. See the file ../etc/MACHINES for a list of systems and the configuration names to use for them. See s/template.h for documentation on writing s/*.h files. */ #undef config_opsysfile #include config_opsysfile /* The configuration script defines machfile to be the name of the m/*.h file that describes the machine you are using. The file is chosen based on the configuration name you give. See the file ../etc/MACHINES for a list of machines and the configuration names to use for them. See m/template.h for documentation on writing m/*.h files. */ #undef config_machfile #include config_machfile /* Load in the conversion definitions if this system needs them and the source file being compiled has not said to inhibit this. There should be no need for you to alter these lines. */ #ifdef SHORTNAMES #ifndef NO_SHORTNAMES #include "../shortnames/remap.h" #endif /* not NO_SHORTNAMES */ #endif /* SHORTNAMES */ /* Define `subprocesses' should be defined if you want to have code for asynchronous subprocesses (as used in M-x compile and M-x shell). These do not work for some USG systems yet; for the ones where they work, the s/*.h file defines this flag. */ #ifndef VMS #ifndef USG /* #define subprocesses */ #endif #endif /* Define LD_SWITCH_SITE to contain any special flags your loader may need. */ #undef LD_SWITCH_SITE /* Define C_SWITCH_SITE to contain any special flags your compiler needs. */ #undef C_SWITCH_SITE /* Define LD_SWITCH_X_SITE to contain any special flags your loader may need to deal with X Windows. For instance, if you've defined HAVE_X_WINDOWS above and your X libraries aren't in a place that your loader can find on its own, you might want to add "-L/..." or something similar. */ #undef LD_SWITCH_X_SITE /* Define C_SWITCH_X_SITE to contain any special flags your compiler may need to deal with X Windows. For instance, if you've defined HAVE_X_WINDOWS above and your X include files aren't in a place that your compiler can find on its own, you might want to add "-I/..." or something similar. */ #undef C_SWITCH_X_SITE /* Define the return type of signal handlers if the s-xxx file did not already do so. */ #define RETSIGTYPE void /* SIGTYPE is the macro we actually use. */ #ifndef SIGTYPE #define SIGTYPE RETSIGTYPE #endif /* The rest of the code currently tests the CPP symbol BSTRING. Override any claims made by the system-description files. */ #undef BSTRING #ifdef HAVE_BCOPY #define BSTRING #endif /* Non-ANSI C compilers usually don't have volatile. */ #ifndef HAVE_VOLATILE #ifndef __STDC__ #define volatile #endif #endif #if 0 /* This should be taken care of by autoconf now. */ /* joe@zircon.uucp says that in order to use XFree386, you have to link against -lXbsd, which insists on defining the random function. faith@cs.unc.edu says this is bogus for Linux and several other OS's. Eventually, we should have autoconf test for this. Anyone want to submit a patch? */ #if defined (HAVE_XFREE386) && !defined (LINUX) #define LIBX11_SYSTEM -lXbsd #define HAVE_RANDOM #endif #endif /* Some of the files of Emacs which are intended for use with other programs assume that if you have a config.h file, you must declare the type of getenv. This declaration shouldn't appear when alloca.s or ymakefile includes config.h. */ #ifndef NOT_C_CODE extern char *getenv (); #endif #endif /* EMACS_CONFIG_H */