Mercurial > emacs
view lisp/vc-mcvs.el @ 82111:63aefab8fbc3
Use mapc and dolist instead of mapcar where possible.
(close-display-connection): New command.
author | Stefan Monnier <monnier@iro.umontreal.ca> |
---|---|
date | Wed, 25 Jul 2007 19:37:21 +0000 |
parents | 09a639d5f43e |
children | b98604865ea0 492971a3f31f |
line wrap: on
line source
;;; vc-mcvs.el --- VC backend for the Meta-CVS version-control system ;; Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. ;; Author: FSF (see vc.el for full credits) ;; Maintainer: Stefan Monnier <monnier@gnu.org> ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to the ;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ;; Boston, MA 02110-1301, USA. ;;; Commentary: ;; The home page of the Meta-CVS version control system is at ;; ;; http://users.footprints.net/~kaz/mcvs.html ;; ;; This is derived from vc-cvs.el as follows: ;; - cp vc-cvs.el vc-mcvs.el ;; - Replace CVS/ with MCVS/CVS/ ;; - Replace 'CVS with 'MCVS ;; - Replace -cvs- with -mcvs- ;; - Replace most of the rest of CVS to Meta-CVS ;; ;; Then of course started the hacking. Only a small part of the code ;; has been touched and not much more than that was tested, so if ;; you bump into a bug, don't be surprised: just report it to me. ;; ;; What has been partly tested: ;; - C-x v v to start editing a file that was checked out with CVSREAD on. ;; - C-x v v to commit a file ;; - C-x v = ;; - C-x v l ;; - C-x v i ;; - C-x v g ;; - M-x vc-rename-file RET ;;; Bugs: ;; - Retrieving snapshots doesn't filter `cvs update' output and thus ;; parses bogus filenames. Don't know if it harms. ;;; Code: (eval-when-compile (require 'vc)) (require 'vc-cvs) ;;; ;;; Customization options ;;; (defcustom vc-mcvs-global-switches nil "*Global switches to pass to any Meta-CVS command." :type '(choice (const :tag "None" nil) (string :tag "Argument String") (repeat :tag "Argument List" :value ("") string)) :version "22.1" :group 'vc) (defcustom vc-mcvs-register-switches nil "*Extra switches for registering a file into Meta-CVS. A string or list of strings passed to the checkin program by \\[vc-register]." :type '(choice (const :tag "None" nil) (string :tag "Argument String") (repeat :tag "Argument List" :value ("") string)) :version "22.1" :group 'vc) (defcustom vc-mcvs-diff-switches nil "*A string or list of strings specifying extra switches for cvs diff under VC." :type '(choice (const :tag "None" nil) (string :tag "Argument String") (repeat :tag "Argument List" :value ("") string)) :version "22.1" :group 'vc) (defcustom vc-mcvs-header (or (cdr (assoc 'MCVS vc-header-alist)) vc-cvs-header) "*Header keywords to be inserted by `vc-insert-headers'." :version "22.1" :type '(repeat string) :group 'vc) (defcustom vc-mcvs-use-edit vc-cvs-use-edit "*Non-nil means to use `cvs edit' to \"check out\" a file. This is only meaningful if you don't use the implicit checkout model \(i.e. if you have $CVSREAD set)." :type 'boolean :version "22.1" :group 'vc) ;;; Properties of the backend (defun vc-mcvs-revision-granularity () 'file) ;;; ;;; State-querying functions ;;; ;;;###autoload (defun vc-mcvs-registered (file) ;;;###autoload (if (vc-find-root file "MCVS/CVS") ;;;###autoload (progn ;;;###autoload (load "vc-mcvs") ;;;###autoload (vc-mcvs-registered file)))) (defun vc-mcvs-root (file) "Return the root directory of a Meta-CVS project, if any." (or (vc-file-getprop file 'mcvs-root) (vc-file-setprop file 'mcvs-root (vc-find-root file "MCVS/CVS")))) (defun vc-mcvs-read (file) (if (file-readable-p file) (with-temp-buffer (insert-file-contents file) (goto-char (point-min)) (read (current-buffer))))) (defun vc-mcvs-map-file (dir file) (let ((map (vc-mcvs-read (expand-file-name "MCVS/MAP" dir))) inode) (dolist (x map inode) (if (equal (nth 2 x) file) (setq inode (nth 1 x)))))) (defun vc-mcvs-registered (file) (let (root inode cvsfile) (when (and (setq root (vc-mcvs-root file)) (setq inode (vc-mcvs-map-file root (file-relative-name file root)))) (vc-file-setprop file 'mcvs-inode inode) ;; Avoid calling `mcvs diff' in vc-workfile-unchanged-p. (vc-file-setprop file 'vc-checkout-time (if (vc-cvs-registered (setq cvsfile (expand-file-name inode root))) (vc-file-getprop cvsfile 'vc-checkout-time) ;; The file might not be registered yet because ;; of lazy-adding. 0)) t))) (defun vc-mcvs-state (file) ;; This would assume the Meta-CVS sandbox is synchronized. ;; (vc-mcvs-cvs state file)) "Meta-CVS-specific version of `vc-state'." (if (vc-stay-local-p file) (let ((state (vc-file-getprop file 'vc-state))) ;; If we should stay local, use the heuristic but only if ;; we don't have a more precise state already available. (if (memq state '(up-to-date edited)) (vc-mcvs-state-heuristic file) state)) (with-temp-buffer (setq default-directory (vc-mcvs-root file)) (vc-mcvs-command t 0 file "status") (vc-cvs-parse-status t)))) (defalias 'vc-mcvs-state-heuristic 'vc-cvs-state-heuristic) (defun vc-mcvs-dir-state (dir) "Find the Meta-CVS state of all files in DIR." ;; if DIR is not under Meta-CVS control, don't do anything. (when (file-readable-p (expand-file-name "MCVS/CVS/Entries" dir)) (if (vc-stay-local-p dir) (vc-mcvs-dir-state-heuristic dir) (let ((default-directory dir)) ;; Don't specify DIR in this command, the default-directory is ;; enough. Otherwise it might fail with remote repositories. (with-temp-buffer (setq default-directory (vc-mcvs-root dir)) (vc-mcvs-command t 0 nil "status" "-l") (goto-char (point-min)) (while (re-search-forward "^=+\n\\([^=\n].*\n\\|\n\\)+" nil t) (narrow-to-region (match-beginning 0) (match-end 0)) (vc-cvs-parse-status) (goto-char (point-max)) (widen))))))) (defun vc-mcvs-workfile-version (file) (vc-cvs-workfile-version (expand-file-name (vc-file-getprop file 'mcvs-inode) (vc-file-getprop file 'mcvs-root)))) (defalias 'vc-mcvs-checkout-model 'vc-cvs-checkout-model) ;;; ;;; State-changing functions ;;; (defun vc-mcvs-register (files &optional rev comment) "Register FILES into the Meta-CVS version-control system. COMMENT can be used to provide an initial description of FILE. `vc-register-switches' and `vc-mcvs-register-switches' are passed to the Meta-CVS command (in that order)." ;; FIXME: multiple-file case should be made to work (if (> (length files) 1) (error "Registering filesets is not yet supported.")) (let* ((file (car files)) (filename (file-name-nondirectory file)) (extpos (string-match "\\." filename)) (ext (if extpos (substring filename (1+ extpos)))) (root (vc-mcvs-root file)) (types-file (expand-file-name "MCVS/TYPES" root)) (map-file (expand-file-name "MCVS/MAP" root)) (types (vc-mcvs-read types-file))) ;; Make sure meta files like MCVS/MAP are not read-only (happens with ;; CVSREAD) since Meta-CVS doesn't pay attention to it at all and goes ;; belly-up. (unless (file-writable-p map-file) (vc-checkout map-file t)) (unless (or (file-writable-p types-file) (not (file-exists-p types-file))) (vc-checkout types-file t)) ;; Make sure the `mcvs add' will not fire up the CVSEDITOR ;; to add a rule for the given file's extension. (when (and ext (not (assoc ext types))) (let ((type (completing-read "Type to use (default): " '("default" "name-only" "keep-old" "binary" "value-only") nil t nil nil "default"))) (push (list ext (make-symbol (upcase (concat ":" type)))) types) (setq types (sort types (lambda (x y) (string< (car x) (car y))))) (with-current-buffer (find-file-noselect types-file) (erase-buffer) (pp types (current-buffer)) (save-buffer) (unless (get-buffer-window (current-buffer) t) (kill-buffer (current-buffer))))))) ;; Now do the ADD. (prog1 (apply 'vc-mcvs-command nil 0 file "add" (and comment (string-match "[^\t\n ]" comment) (concat "-m" comment)) (vc-switches 'MCVS 'register)) ;; I'm not sure exactly why, but if we don't setup the inode and root ;; prop of the file, things break later on in vc-mode-line that ;; ends up calling vc-mcvs-workfile-version. ;; We also need to set vc-checkout-time so that vc-workfile-unchanged-p ;; doesn't try to call `mcvs diff' on the file. (vc-mcvs-registered file))) (defalias 'vc-mcvs-responsible-p 'vc-mcvs-root "Return non-nil if CVS thinks it is responsible for FILE.") (defalias 'vc-cvs-could-register 'vc-cvs-responsible-p "Return non-nil if FILE could be registered in Meta-CVS. This is only possible if Meta-CVS is responsible for FILE's directory.") (defun vc-mcvs-checkin (files rev comment) "Meta-CVS-specific version of `vc-backend-checkin'." (unless (or (not rev) (vc-mcvs-valid-version-number-p rev)) (if (not (vc-mcvs-valid-symbolic-tag-name-p rev)) (error "%s is not a valid symbolic tag name" rev) ;; If the input revision is a valid symbolic tag name, we create it ;; as a branch, commit and switch to it. ;; This file-specific form of branching is deprecated. ;; We can't use `mcvs branch' and `mcvs switch' because they cannot ;; be applied just to this one file. (apply 'vc-mcvs-command nil 0 files "tag" "-b" (list rev)) (apply 'vc-mcvs-command nil 0 files "update" "-r" (list rev)) (mapcar (lambda (file) (vc-file-setprop file 'vc-mcvs-sticky-tag rev)) files) (setq rev nil))) ;; This commit might cvs-commit several files (e.g. MAP and TYPES) ;; so using numbered revs here is dangerous and somewhat meaningless. (when rev (error "Cannot commit to a specific revision number")) (let ((status (apply 'vc-mcvs-command nil 1 files "ci" "-m" comment (vc-switches 'MCVS 'checkin)))) (set-buffer "*vc*") (goto-char (point-min)) (when (not (zerop status)) ;; Check checkin problem. (cond ((re-search-forward "Up-to-date check failed" nil t) (mapcar (lambda (file) (vc-file-setprop file 'vc-state 'needs-merge)) files) (error (substitute-command-keys (concat "Up-to-date check failed: " "type \\[vc-next-action] to merge in changes")))) (t (pop-to-buffer (current-buffer)) (goto-char (point-min)) (shrink-window-if-larger-than-buffer) (error "Check-in failed")))) ;; Single-file commit? Then update the version by parsing the buffer. ;; Otherwise we can't necessarily tell what goes with what; clear ;; its properties so they have to be refetched. (if (= (length files) 1) (vc-file-setprop (car files) 'vc-workfile-version (vc-parse-buffer "^\\(new\\|initial\\) revision: \\([0-9.]+\\)" 2)) (mapc (lambda (file) (vc-file-clearprops file)) files)) ;; Anyway, forget the checkout model of the file, because we might have ;; guessed wrong when we found the file. After commit, we can ;; tell it from the permissions of the file (see ;; vc-mcvs-checkout-model). (mapc (lambda (file) (vc-file-setprop file 'vc-checkout-model nil)) files) ;; if this was an explicit check-in (does not include creation of ;; a branch), remove the sticky tag. (if (and rev (not (vc-mcvs-valid-symbolic-tag-name-p rev))) (vc-mcvs-command nil 0 files "update" "-A")))) (defun vc-mcvs-find-version (file rev buffer) (apply 'vc-mcvs-command buffer 0 file "-Q" ; suppress diagnostic output "update" (and rev (not (string= rev "")) (concat "-r" rev)) "-p" (vc-switches 'MCVS 'checkout))) (defun vc-mcvs-checkout (file &optional editable rev) (message "Checking out %s..." file) (with-current-buffer (or (get-file-buffer file) (current-buffer)) (vc-call update file editable rev (vc-switches 'MCVS 'checkout))) (vc-mode-line file) (message "Checking out %s...done" file)) (defun vc-mcvs-update (file editable rev switches) (if (and (file-exists-p file) (not rev)) ;; If no revision was specified, just make the file writable ;; if necessary (using `cvs-edit' if requested). (and editable (not (eq (vc-mcvs-checkout-model file) 'implicit)) (if vc-mcvs-use-edit (vc-mcvs-command nil 0 file "edit") (set-file-modes file (logior (file-modes file) 128)) (if (equal file buffer-file-name) (toggle-read-only -1)))) ;; Check out a particular version (or recreate the file). (vc-file-setprop file 'vc-workfile-version nil) (apply 'vc-mcvs-command nil 0 file (if editable "-w") "update" ;; default for verbose checkout: clear the sticky tag so ;; that the actual update will get the head of the trunk (if (or (not rev) (string= rev "")) "-A" (concat "-r" rev)) switches))) (defun vc-mcvs-rename-file (old new) (vc-mcvs-command nil 0 new "move" (file-relative-name old))) (defun vc-mcvs-revert (file &optional contents-done) "Revert FILE to the version it was based on." (vc-default-revert 'MCVS file contents-done) (unless (eq (vc-checkout-model file) 'implicit) (if vc-mcvs-use-edit (vc-mcvs-command nil 0 file "unedit") ;; Make the file read-only by switching off all w-bits (set-file-modes file (logand (file-modes file) 3950))))) (defun vc-mcvs-merge (file first-version &optional second-version) "Merge changes into current working copy of FILE. The changes are between FIRST-VERSION and SECOND-VERSION." (vc-mcvs-command nil 0 file "update" "-kk" (concat "-j" first-version) (concat "-j" second-version)) (vc-file-setprop file 'vc-state 'edited) (with-current-buffer (get-buffer "*vc*") (goto-char (point-min)) (if (re-search-forward "conflicts during merge" nil t) 1 ; signal error 0))) ; signal success (defun vc-mcvs-merge-news (file) "Merge in any new changes made to FILE." (message "Merging changes into %s..." file) ;; (vc-file-setprop file 'vc-workfile-version nil) (vc-file-setprop file 'vc-checkout-time 0) (vc-mcvs-command nil 0 file "update") ;; Analyze the merge result reported by Meta-CVS, and set ;; file properties accordingly. (with-current-buffer (get-buffer "*vc*") (goto-char (point-min)) ;; get new workfile version (if (re-search-forward "^Merging differences between [0-9.]* and \\([0-9.]*\\) into" nil t) (vc-file-setprop file 'vc-workfile-version (match-string 1)) (vc-file-setprop file 'vc-workfile-version nil)) ;; get file status (prog1 (if (eq (buffer-size) 0) 0 ;; there were no news; indicate success (if (re-search-forward (concat "^\\([CMUP] \\)?" ".*" "\\( already contains the differences between \\)?") nil t) (cond ;; Merge successful, we are in sync with repository now ((or (match-string 2) (string= (match-string 1) "U ") (string= (match-string 1) "P ")) (vc-file-setprop file 'vc-state 'up-to-date) (vc-file-setprop file 'vc-checkout-time (nth 5 (file-attributes file))) 0);; indicate success to the caller ;; Merge successful, but our own changes are still in the file ((string= (match-string 1) "M ") (vc-file-setprop file 'vc-state 'edited) 0);; indicate success to the caller ;; Conflicts detected! (t (vc-file-setprop file 'vc-state 'edited) 1);; signal the error to the caller ) (pop-to-buffer "*vc*") (error "Couldn't analyze mcvs update result"))) (message "Merging changes into %s...done" file)))) ;;; ;;; History functions ;;; (defun vc-mcvs-print-log (files &optional buffer) "Get change log associated with FILES." (let ((default-directory (vc-mcvs-root (car files)))) ;; Run the command from the root dir so that `mcvs filt' returns ;; valid relative names. (vc-mcvs-command buffer (if (and (vc-stay-local-p files) (fboundp 'start-process)) 'async 0) files "log"))) (defun vc-mcvs-diff (files &optional oldvers newvers buffer) "Get a difference report using Meta-CVS between two versions of FILES." (let* ((async (and (not vc-disable-async-diff) (vc-stay-local-p files) (fboundp 'start-process))) ;; Run the command from the root dir so that `mcvs filt' returns ;; valid relative names. (default-directory (vc-mcvs-root (car files))) (status (apply 'vc-mcvs-command (or buffer "*vc-diff*") (if async 'async 1) files "diff" (and oldvers (concat "-r" oldvers)) (and newvers (concat "-r" newvers)) (vc-switches 'MCVS 'diff)))) (if async 1 status))) ; async diff, pessimistic assumption. (defun vc-mcvs-diff-tree (dir &optional rev1 rev2) "Diff all files at and below DIR." (with-current-buffer "*vc-diff*" ;; Run the command from the root dir so that `mcvs filt' returns ;; valid relative names. (setq default-directory (vc-mcvs-root dir)) ;; cvs diff: use a single call for the entire tree (let ((coding-system-for-read (or coding-system-for-read 'undecided))) (apply 'vc-mcvs-command "*vc-diff*" 1 dir "diff" (and rev1 (concat "-r" rev1)) (and rev2 (concat "-r" rev2)) (vc-switches 'MCVS 'diff))))) (defun vc-mcvs-annotate-command (file buffer &optional version) "Execute \"mcvs annotate\" on FILE, inserting the contents in BUFFER. Optional arg VERSION is a version to annotate from." (vc-mcvs-command buffer (if (and (vc-stay-local-p file) (fboundp 'start-process)) 'async 0) file "annotate" (if version (concat "-r" version))) (with-current-buffer buffer (goto-char (point-min)) (re-search-forward "^[0-9]") (delete-region (point-min) (1- (point))))) (defalias 'vc-mcvs-annotate-current-time 'vc-cvs-annotate-current-time) (defalias 'vc-mcvs-annotate-time 'vc-cvs-annotate-time) ;;; ;;; Snapshot system ;;; (defun vc-mcvs-create-snapshot (dir name branchp) "Assign to DIR's current version a given NAME. If BRANCHP is non-nil, the name is created as a branch (and the current workspace is immediately moved to that new branch)." (if (not branchp) (vc-mcvs-command nil 0 dir "tag" "-c" name) (vc-mcvs-command nil 0 dir "branch" name) (vc-mcvs-command nil 0 dir "switch" name))) (defun vc-mcvs-retrieve-snapshot (dir name update) "Retrieve a snapshot at and below DIR. NAME is the name of the snapshot; if it is empty, do a `cvs update'. If UPDATE is non-nil, then update (resynch) any affected buffers." (with-current-buffer (get-buffer-create "*vc*") (let ((default-directory dir) (sticky-tag)) (erase-buffer) (if (or (not name) (string= name "")) (vc-mcvs-command t 0 nil "update") (vc-mcvs-command t 0 nil "update" "-r" name) (setq sticky-tag name)) (when update (goto-char (point-min)) (while (not (eobp)) (if (looking-at "\\([CMUP]\\) \\(.*\\)") (let* ((file (expand-file-name (match-string 2) dir)) (state (match-string 1)) (buffer (find-buffer-visiting file))) (when buffer (cond ((or (string= state "U") (string= state "P")) (vc-file-setprop file 'vc-state 'up-to-date) (vc-file-setprop file 'vc-workfile-version nil) (vc-file-setprop file 'vc-checkout-time (nth 5 (file-attributes file)))) ((or (string= state "M") (string= state "C")) (vc-file-setprop file 'vc-state 'edited) (vc-file-setprop file 'vc-workfile-version nil) (vc-file-setprop file 'vc-checkout-time 0))) (vc-file-setprop file 'vc-mcvs-sticky-tag sticky-tag) (vc-resynch-buffer file t t)))) (forward-line 1)))))) ;;; ;;; Miscellaneous ;;; (defalias 'vc-mcvs-make-version-backups-p 'vc-stay-local-p "Return non-nil if version backups should be made for FILE.") (defalias 'vc-mcvs-check-headers 'vc-cvs-check-headers) ;;; ;;; Internal functions ;;; (defun vc-mcvs-command (buffer okstatus file &rest flags) "A wrapper around `vc-do-command' for use in vc-mcvs.el. The difference to vc-do-command is that this function always invokes `mcvs', and that it passes `vc-mcvs-global-switches' to it before FLAGS." (let ((args (append '("--error-terminate") (if (stringp vc-mcvs-global-switches) (cons vc-mcvs-global-switches flags) (append vc-mcvs-global-switches flags))))) (if (not (member (car flags) '("diff" "log" "status"))) ;; No need to filter: do it the easy way. (apply 'vc-do-command buffer okstatus "mcvs" file args) ;; We need to filter the output. ;; The output of the filter uses filenames relative to the root, ;; so we need to change the default-directory. ;; (assert (equal default-directory (vc-mcvs-root file))) (vc-do-command buffer okstatus "sh" nil "-c" (concat "mcvs " (mapconcat 'shell-quote-argument (append (remq nil args) (if file (list (file-relative-name file)))) " ") " | mcvs filt"))))) (defun vc-mcvs-repository-hostname (dirname) (vc-cvs-repository-hostname (vc-mcvs-root dirname))) (defun vc-mcvs-dir-state-heuristic (dir) "Find the Meta-CVS state of all files in DIR, using only local information." (with-temp-buffer (vc-cvs-get-entries dir) (goto-char (point-min)) (while (not (eobp)) ;; Meta-MCVS-removed files are not taken under VC control. (when (looking-at "/\\([^/]*\\)/[^/-]") (let ((file (expand-file-name (match-string 1) dir))) (unless (vc-file-getprop file 'vc-state) (vc-cvs-parse-entry file t)))) (forward-line 1)))) (defalias 'vc-mcvs-valid-symbolic-tag-name-p 'vc-cvs-valid-symbolic-tag-name-p) (defalias 'vc-mcvs-valid-version-number-p 'vc-cvs-valid-version-number-p) (provide 'vc-mcvs) ;; arch-tag: a39c7c1c-5247-429d-88df-dd7187d2e704 ;;; vc-mcvs.el ends here