Mercurial > emacs
view src/getloadavg.c @ 12888:684378ed4f45
Fix typos.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sat, 19 Aug 1995 04:45:06 +0000 |
parents | a252e42dabcc |
children | 2631a29a614c |
line wrap: on
line source
/* Get the system load averages. Copyright (C) 1985, 86, 87, 88, 89, 91, 92, 93, 1994, 1995 Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Compile-time symbols that this file uses: FIXUP_KERNEL_SYMBOL_ADDR() Adjust address in returned struct nlist. KERNEL_FILE Pathname of the kernel to nlist. LDAV_CVT() Scale the load average from the kernel. Returns a double. LDAV_SYMBOL Name of kernel symbol giving load average. LOAD_AVE_TYPE Type of the load average array in the kernel. Must be defined unless one of apollo, DGUX, NeXT, or UMAX is defined; otherwise, no load average is available. NLIST_STRUCT Include nlist.h, not a.out.h, and the nlist n_name element is a pointer, not an array. NLIST_NAME_UNION struct nlist has an n_un member, not n_name. LINUX_LDAV_FILE [__linux__]: File containing load averages. Specific system predefines this file uses, aside from setting default values if not emacs: apollo BSD Real BSD, not just BSD-like. convex DGUX eunice UNIX emulator under VMS. hpux NeXT sgi sequent Sequent Dynix 3.x.x (BSD) _SEQUENT_ Sequent DYNIX/ptx 1.x.x (SYSV) sony_news NEWS-OS (works at least for 4.1C) UMAX UMAX4_3 VMS __linux__ Linux: assumes /proc filesystem mounted. Support from Michael K. Johnson. __NetBSD__ NetBSD: assumes /kern filesystem mounted. In addition, to avoid nesting many #ifdefs, we internally set LDAV_DONE to indicate that the load average has been computed. We also #define LDAV_PRIVILEGED if a program will require special installation to be able to call getloadavg. */ /* This should always be first. */ #ifdef HAVE_CONFIG_H #include <config.h> #endif #include <sys/types.h> /* Both the Emacs and non-Emacs sections want this. Some configuration files' definitions for the LOAD_AVE_CVT macro (like sparc.h's) use macros like FSCALE, defined here. */ #ifdef unix #include <sys/param.h> #endif /* Exclude all the code except the test program at the end if the system has its own `getloadavg' function. The declaration of `errno' is needed by the test program as well as the function itself, so it comes first. */ #include <errno.h> #ifndef errno extern int errno; #endif #ifndef HAVE_GETLOADAVG /* The existing Emacs configuration files define a macro called LOAD_AVE_CVT, which accepts a value of type LOAD_AVE_TYPE, and returns the load average multiplied by 100. What we actually want is a macro called LDAV_CVT, which returns the load average as an unmultiplied double. For backwards compatibility, we'll define LDAV_CVT in terms of LOAD_AVE_CVT, but future machine config files should just define LDAV_CVT directly. */ #if !defined(LDAV_CVT) && defined(LOAD_AVE_CVT) #define LDAV_CVT(n) (LOAD_AVE_CVT (n) / 100.0) #endif #if !defined (BSD) && defined (ultrix) /* Ultrix behaves like BSD on Vaxen. */ #define BSD #endif #ifdef NeXT /* NeXT in the 2.{0,1,2} releases defines BSD in <sys/param.h>, which conflicts with the definition understood in this file, that this really is BSD. */ #undef BSD /* NeXT defines FSCALE in <sys/param.h>. However, we take FSCALE being defined to mean that the nlist method should be used, which is not true. */ #undef FSCALE #endif /* Set values that are different from the defaults, which are set a little farther down with #ifndef. */ /* Some shorthands. */ #if defined (HPUX) && !defined (hpux) #define hpux #endif #if defined(hp300) && !defined(hpux) #define MORE_BSD #endif #if defined(ultrix) && defined(mips) #define decstation #endif #if defined(sun) && defined(SVR4) #define SUNOS_5 #endif #if defined (__osf__) && (defined (__alpha) || defined (__alpha__)) #define OSF_ALPHA #include <sys/table.h> #endif #if defined (__osf__) && (defined (mips) || defined (__mips__)) #define OSF_MIPS #include <sys/table.h> #endif /* UTek's /bin/cc on the 4300 has no architecture specific cpp define by default, but _MACH_IND_SYS_TYPES is defined in <sys/types.h>. Combine that with a couple of other things and we'll have a unique match. */ #if !defined (tek4300) && defined (unix) && defined (m68k) && defined (mc68000) && defined (mc68020) && defined (_MACH_IND_SYS_TYPES) #define tek4300 /* Define by emacs, but not by other users. */ #endif /* VAX C can't handle multi-line #ifs, or lines longer than 256 chars. */ #ifndef LOAD_AVE_TYPE #ifdef MORE_BSD #define LOAD_AVE_TYPE long #endif #ifdef sun #define LOAD_AVE_TYPE long #endif #ifdef decstation #define LOAD_AVE_TYPE long #endif #ifdef _SEQUENT_ #define LOAD_AVE_TYPE long #endif #ifdef sgi #define LOAD_AVE_TYPE long #endif #ifdef SVR4 #define LOAD_AVE_TYPE long #endif #ifdef sony_news #define LOAD_AVE_TYPE long #endif #ifdef sequent #define LOAD_AVE_TYPE long #endif #ifdef OSF_ALPHA #define LOAD_AVE_TYPE long #endif #if defined (ardent) && defined (titan) #define LOAD_AVE_TYPE long #endif #ifdef tek4300 #define LOAD_AVE_TYPE long #endif #if defined(alliant) && defined(i860) /* Alliant FX/2800 */ #define LOAD_AVE_TYPE long #endif #ifdef _AIX #define LOAD_AVE_TYPE long #endif #ifdef convex #define LOAD_AVE_TYPE double #ifndef LDAV_CVT #define LDAV_CVT(n) (n) #endif #endif #endif /* No LOAD_AVE_TYPE. */ #ifdef OSF_ALPHA /* <sys/param.h> defines an incorrect value for FSCALE on Alpha OSF/1, according to ghazi@noc.rutgers.edu. */ #undef FSCALE #define FSCALE 1024.0 #endif #if defined(alliant) && defined(i860) /* Alliant FX/2800 */ /* <sys/param.h> defines an incorrect value for FSCALE on an Alliant FX/2800 Concentrix 2.2, according to ghazi@noc.rutgers.edu. */ #undef FSCALE #define FSCALE 100.0 #endif #ifndef FSCALE /* SunOS and some others define FSCALE in sys/param.h. */ #ifdef MORE_BSD #define FSCALE 2048.0 #endif #if defined(MIPS) || defined(SVR4) || defined(decstation) #define FSCALE 256 #endif #if defined (sgi) || defined (sequent) /* Sometimes both MIPS and sgi are defined, so FSCALE was just defined above under #ifdef MIPS. But we want the sgi value. */ #undef FSCALE #define FSCALE 1000.0 #endif #if defined (ardent) && defined (titan) #define FSCALE 65536.0 #endif #ifdef tek4300 #define FSCALE 100.0 #endif #ifdef _AIX #define FSCALE 65536.0 #endif #endif /* Not FSCALE. */ #if !defined (LDAV_CVT) && defined (FSCALE) #define LDAV_CVT(n) (((double) (n)) / FSCALE) #endif /* VAX C can't handle multi-line #ifs, or lines longer that 256 characters. */ #ifndef NLIST_STRUCT #ifdef MORE_BSD #define NLIST_STRUCT #endif #ifdef sun #define NLIST_STRUCT #endif #ifdef decstation #define NLIST_STRUCT #endif #ifdef hpux #define NLIST_STRUCT #endif #if defined (_SEQUENT_) || defined (sequent) #define NLIST_STRUCT #endif #ifdef sgi #define NLIST_STRUCT #endif #ifdef SVR4 #define NLIST_STRUCT #endif #ifdef sony_news #define NLIST_STRUCT #endif #ifdef OSF_ALPHA #define NLIST_STRUCT #endif #if defined (ardent) && defined (titan) #define NLIST_STRUCT #endif #ifdef tek4300 #define NLIST_STRUCT #endif #ifdef butterfly #define NLIST_STRUCT #endif #if defined(alliant) && defined(i860) /* Alliant FX/2800 */ #define NLIST_STRUCT #endif #ifdef _AIX #define NLIST_STRUCT #endif #endif /* defined (NLIST_STRUCT) */ #if defined(sgi) || (defined(mips) && !defined(BSD)) #define FIXUP_KERNEL_SYMBOL_ADDR(nl) ((nl)[0].n_value &= ~(1 << 31)) #endif #if !defined (KERNEL_FILE) && defined (sequent) #define KERNEL_FILE "/dynix" #endif #if !defined (KERNEL_FILE) && defined (hpux) #define KERNEL_FILE "/hp-ux" #endif #if !defined(KERNEL_FILE) && (defined(_SEQUENT_) || defined(MIPS) || defined(SVR4) || defined(ISC) || defined (sgi) || defined(SVR4) || (defined (ardent) && defined (titan))) #define KERNEL_FILE "/unix" #endif #if !defined (LDAV_SYMBOL) && defined (alliant) #define LDAV_SYMBOL "_Loadavg" #endif #if !defined(LDAV_SYMBOL) && ((defined(hpux) && !defined(hp9000s300)) || defined(_SEQUENT_) || defined(SVR4) || defined(ISC) || defined(sgi) || (defined (ardent) && defined (titan)) || defined (_AIX)) #define LDAV_SYMBOL "avenrun" #endif #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <stdio.h> /* LOAD_AVE_TYPE should only get defined if we're going to use the nlist method. */ #if !defined(LOAD_AVE_TYPE) && (defined(BSD) || defined(LDAV_CVT) || defined(KERNEL_FILE) || defined(LDAV_SYMBOL)) #define LOAD_AVE_TYPE double #endif #ifdef LOAD_AVE_TYPE #ifndef VMS #ifndef NLIST_STRUCT #include <a.out.h> #else /* NLIST_STRUCT */ #include <nlist.h> #endif /* NLIST_STRUCT */ #ifdef SUNOS_5 #include <fcntl.h> #include <kvm.h> #endif #ifndef KERNEL_FILE #define KERNEL_FILE "/vmunix" #endif /* KERNEL_FILE */ #ifndef LDAV_SYMBOL #define LDAV_SYMBOL "_avenrun" #endif /* LDAV_SYMBOL */ #else /* VMS */ #ifndef eunice #include <iodef.h> #include <descrip.h> #else /* eunice */ #include <vms/iodef.h> #endif /* eunice */ #endif /* VMS */ #ifndef LDAV_CVT #define LDAV_CVT(n) ((double) (n)) #endif /* !LDAV_CVT */ #endif /* LOAD_AVE_TYPE */ #ifdef NeXT #ifdef HAVE_MACH_MACH_H #include <mach/mach.h> #else #include <mach.h> #endif #endif /* NeXT */ #ifdef sgi #include <sys/sysmp.h> #endif /* sgi */ #ifdef UMAX #include <stdio.h> #include <signal.h> #include <sys/time.h> #include <sys/wait.h> #include <sys/syscall.h> #ifdef UMAX_43 #include <machine/cpu.h> #include <inq_stats/statistics.h> #include <inq_stats/sysstats.h> #include <inq_stats/cpustats.h> #include <inq_stats/procstats.h> #else /* Not UMAX_43. */ #include <sys/sysdefs.h> #include <sys/statistics.h> #include <sys/sysstats.h> #include <sys/cpudefs.h> #include <sys/cpustats.h> #include <sys/procstats.h> #endif /* Not UMAX_43. */ #endif /* UMAX */ #ifdef DGUX #include <sys/dg_sys_info.h> #endif #if defined(HAVE_FCNTL_H) || defined(_POSIX_VERSION) #include <fcntl.h> #else #include <sys/file.h> #endif /* Avoid static vars inside a function since in HPUX they dump as pure. */ #ifdef NeXT static processor_set_t default_set; static int getloadavg_initialized; #endif /* NeXT */ #ifdef UMAX static unsigned int cpus = 0; static unsigned int samples; #endif /* UMAX */ #ifdef DGUX static struct dg_sys_info_load_info load_info; /* what-a-mouthful! */ #endif /* DGUX */ #ifdef LOAD_AVE_TYPE /* File descriptor open to /dev/kmem or VMS load ave driver. */ static int channel; /* Nonzero iff channel is valid. */ static int getloadavg_initialized; /* Offset in kmem to seek to read load average, or 0 means invalid. */ static long offset; #if !defined(VMS) && !defined(sgi) static struct nlist nl[2]; #endif /* Not VMS or sgi */ #ifdef SUNOS_5 static kvm_t *kd; #endif /* SUNOS_5 */ #endif /* LOAD_AVE_TYPE */ /* Put the 1 minute, 5 minute and 15 minute load averages into the first NELEM elements of LOADAVG. Return the number written (never more than 3, but may be less than NELEM), or -1 if an error occurred. */ int getloadavg (loadavg, nelem) double loadavg[]; int nelem; { int elem = 0; /* Return value. */ #ifdef NO_GET_LOAD_AVG #define LDAV_DONE /* Set errno to zero to indicate that there was no particular error; this function just can't work at all on this system. */ errno = 0; elem = -1; #endif #if !defined (LDAV_DONE) && defined (__linux__) #define LDAV_DONE #undef LOAD_AVE_TYPE #ifndef LINUX_LDAV_FILE #define LINUX_LDAV_FILE "/proc/loadavg" #endif char ldavgbuf[40]; double load_ave[3]; int fd, count; fd = open (LINUX_LDAV_FILE, O_RDONLY); if (fd == -1) return -1; count = read (fd, ldavgbuf, 40); (void) close (fd); if (count <= 0) return -1; count = sscanf (ldavgbuf, "%lf %lf %lf", &load_ave[0], &load_ave[1], &load_ave[2]); if (count < 1) return -1; for (elem = 0; elem < nelem && elem < count; elem++) loadavg[elem] = load_ave[elem]; return elem; #endif /* __linux__ */ #if !defined (LDAV_DONE) && defined (__NetBSD__) #define LDAV_DONE #undef LOAD_AVE_TYPE #ifndef NETBSD_LDAV_FILE #define NETBSD_LDAV_FILE "/kern/loadavg" #endif unsigned long int load_ave[3], scale; int count; FILE *fp; fp = fopen (NETBSD_LDAV_FILE, "r"); if (fp == NULL) return -1; count = fscanf (fp, "%lu %lu %lu %lu\n", &load_ave[0], &load_ave[1], &load_ave[2], &scale); (void) fclose (fp); if (count != 4) return -1; for (elem = 0; elem < nelem; elem++) loadavg[elem] = (double) load_ave[elem] / (double) scale; return elem; #endif /* __NetBSD__ */ #if !defined (LDAV_DONE) && defined (NeXT) #define LDAV_DONE /* The NeXT code was adapted from iscreen 3.2. */ host_t host; struct processor_set_basic_info info; unsigned info_count; /* We only know how to get the 1-minute average for this system, so even if the caller asks for more than 1, we only return 1. */ if (!getloadavg_initialized) { if (processor_set_default (host_self (), &default_set) == KERN_SUCCESS) getloadavg_initialized = 1; } if (getloadavg_initialized) { info_count = PROCESSOR_SET_BASIC_INFO_COUNT; if (processor_set_info (default_set, PROCESSOR_SET_BASIC_INFO, &host, (processor_set_info_t) &info, &info_count) != KERN_SUCCESS) getloadavg_initialized = 0; else { if (nelem > 0) loadavg[elem++] = (double) info.load_average / LOAD_SCALE; } } if (!getloadavg_initialized) return -1; #endif /* NeXT */ #if !defined (LDAV_DONE) && defined (UMAX) #define LDAV_DONE /* UMAX 4.2, which runs on the Encore Multimax multiprocessor, does not have a /dev/kmem. Information about the workings of the running kernel can be gathered with inq_stats system calls. We only know how to get the 1-minute average for this system. */ struct proc_summary proc_sum_data; struct stat_descr proc_info; double load; register unsigned int i, j; if (cpus == 0) { register unsigned int c, i; struct cpu_config conf; struct stat_descr desc; desc.sd_next = 0; desc.sd_subsys = SUBSYS_CPU; desc.sd_type = CPUTYPE_CONFIG; desc.sd_addr = (char *) &conf; desc.sd_size = sizeof conf; if (inq_stats (1, &desc)) return -1; c = 0; for (i = 0; i < conf.config_maxclass; ++i) { struct class_stats stats; bzero ((char *) &stats, sizeof stats); desc.sd_type = CPUTYPE_CLASS; desc.sd_objid = i; desc.sd_addr = (char *) &stats; desc.sd_size = sizeof stats; if (inq_stats (1, &desc)) return -1; c += stats.class_numcpus; } cpus = c; samples = cpus < 2 ? 3 : (2 * cpus / 3); } proc_info.sd_next = 0; proc_info.sd_subsys = SUBSYS_PROC; proc_info.sd_type = PROCTYPE_SUMMARY; proc_info.sd_addr = (char *) &proc_sum_data; proc_info.sd_size = sizeof (struct proc_summary); proc_info.sd_sizeused = 0; if (inq_stats (1, &proc_info) != 0) return -1; load = proc_sum_data.ps_nrunnable; j = 0; for (i = samples - 1; i > 0; --i) { load += proc_sum_data.ps_nrun[j]; if (j++ == PS_NRUNSIZE) j = 0; } if (nelem > 0) loadavg[elem++] = load / samples / cpus; #endif /* UMAX */ #if !defined (LDAV_DONE) && defined (DGUX) #define LDAV_DONE /* This call can return -1 for an error, but with good args it's not supposed to fail. The first argument is for no apparent reason of type `long int *'. */ dg_sys_info ((long int *) &load_info, DG_SYS_INFO_LOAD_INFO_TYPE, DG_SYS_INFO_LOAD_VERSION_0); if (nelem > 0) loadavg[elem++] = load_info.one_minute; if (nelem > 1) loadavg[elem++] = load_info.five_minute; if (nelem > 2) loadavg[elem++] = load_info.fifteen_minute; #endif /* DGUX */ #if !defined (LDAV_DONE) && defined (apollo) #define LDAV_DONE /* Apollo code from lisch@mentorg.com (Ray Lischner). This system call is not documented. The load average is obtained as three long integers, for the load average over the past minute, five minutes, and fifteen minutes. Each value is a scaled integer, with 16 bits of integer part and 16 bits of fraction part. I'm not sure which operating system first supported this system call, but I know that SR10.2 supports it. */ extern void proc1_$get_loadav (); unsigned long load_ave[3]; proc1_$get_loadav (load_ave); if (nelem > 0) loadavg[elem++] = load_ave[0] / 65536.0; if (nelem > 1) loadavg[elem++] = load_ave[1] / 65536.0; if (nelem > 2) loadavg[elem++] = load_ave[2] / 65536.0; #endif /* apollo */ #if !defined (LDAV_DONE) && defined (OSF_MIPS) #define LDAV_DONE struct tbl_loadavg load_ave; table (TBL_LOADAVG, 0, &load_ave, 1, sizeof (load_ave)); loadavg[elem++] = (load_ave.tl_lscale == 0 ? load_ave.tl_avenrun.d[0] : (load_ave.tl_avenrun.l[0] / (double) load_ave.tl_lscale)); #endif /* OSF_MIPS */ #if !defined (LDAV_DONE) && defined (OSF_ALPHA) #define LDAV_DONE struct tbl_loadavg load_ave; table (TBL_LOADAVG, 0, &load_ave, 1, sizeof (load_ave)); for (elem = 0; elem < nelem; elem++) loadavg[elem] = (load_ave.tl_lscale == 0 ? load_ave.tl_avenrun.d[elem] : (load_ave.tl_avenrun.l[elem] / (double) load_ave.tl_lscale)); #endif /* OSF_ALPHA */ #if !defined (LDAV_DONE) && defined (VMS) /* VMS specific code -- read from the Load Ave driver. */ LOAD_AVE_TYPE load_ave[3]; static int getloadavg_initialized = 0; #ifdef eunice struct { int dsc$w_length; char *dsc$a_pointer; } descriptor; #endif /* Ensure that there is a channel open to the load ave device. */ if (!getloadavg_initialized) { /* Attempt to open the channel. */ #ifdef eunice descriptor.dsc$w_length = 18; descriptor.dsc$a_pointer = "$$VMS_LOAD_AVERAGE"; #else $DESCRIPTOR (descriptor, "LAV0:"); #endif if (sys$assign (&descriptor, &channel, 0, 0) & 1) getloadavg_initialized = 1; } /* Read the load average vector. */ if (getloadavg_initialized && !(sys$qiow (0, channel, IO$_READVBLK, 0, 0, 0, load_ave, 12, 0, 0, 0, 0) & 1)) { sys$dassgn (channel); getloadavg_initialized = 0; } if (!getloadavg_initialized) return -1; #endif /* VMS */ #if !defined (LDAV_DONE) && defined(LOAD_AVE_TYPE) && !defined(VMS) /* UNIX-specific code -- read the average from /dev/kmem. */ #define LDAV_PRIVILEGED /* This code requires special installation. */ LOAD_AVE_TYPE load_ave[3]; /* Get the address of LDAV_SYMBOL. */ if (offset == 0) { #ifndef sgi #ifndef NLIST_STRUCT strcpy (nl[0].n_name, LDAV_SYMBOL); strcpy (nl[1].n_name, ""); #else /* NLIST_STRUCT */ #ifdef NLIST_NAME_UNION nl[0].n_un.n_name = LDAV_SYMBOL; nl[1].n_un.n_name = 0; #else /* not NLIST_NAME_UNION */ nl[0].n_name = LDAV_SYMBOL; nl[1].n_name = 0; #endif /* not NLIST_NAME_UNION */ #endif /* NLIST_STRUCT */ #ifndef SUNOS_5 if ( #if !(defined (_AIX) && !defined (ps2)) nlist (KERNEL_FILE, nl) #else /* _AIX */ knlist (nl, 1, sizeof (nl[0])) #endif >= 0) /* Omit "&& nl[0].n_type != 0 " -- it breaks on Sun386i. */ { #ifdef FIXUP_KERNEL_SYMBOL_ADDR FIXUP_KERNEL_SYMBOL_ADDR (nl); #endif offset = nl[0].n_value; } #endif /* !SUNOS_5 */ #else /* sgi */ int ldav_off; ldav_off = sysmp (MP_KERNADDR, MPKA_AVENRUN); if (ldav_off != -1) offset = (long) ldav_off & 0x7fffffff; #endif /* sgi */ } /* Make sure we have /dev/kmem open. */ if (!getloadavg_initialized) { #ifndef SUNOS_5 channel = open ("/dev/kmem", 0); if (channel >= 0) { /* Set the channel to close on exec, so it does not litter any child's descriptor table. */ #ifdef FD_SETFD #ifndef FD_CLOEXEC #define FD_CLOEXEC 1 #endif (void) fcntl (channel, F_SETFD, FD_CLOEXEC); #endif getloadavg_initialized = 1; } #else /* SUNOS_5 */ /* We pass 0 for the kernel, corefile, and swapfile names to use the currently running kernel. */ kd = kvm_open (0, 0, 0, O_RDONLY, 0); if (kd != 0) { /* nlist the currently running kernel. */ kvm_nlist (kd, nl); offset = nl[0].n_value; getloadavg_initialized = 1; } #endif /* SUNOS_5 */ } /* If we can, get the load average values. */ if (offset && getloadavg_initialized) { /* Try to read the load. */ #ifndef SUNOS_5 if (lseek (channel, offset, 0) == -1L || read (channel, (char *) load_ave, sizeof (load_ave)) != sizeof (load_ave)) { close (channel); getloadavg_initialized = 0; } #else /* SUNOS_5 */ if (kvm_read (kd, offset, (char *) load_ave, sizeof (load_ave)) != sizeof (load_ave)) { kvm_close (kd); getloadavg_initialized = 0; } #endif /* SUNOS_5 */ } if (offset == 0 || !getloadavg_initialized) return -1; #endif /* LOAD_AVE_TYPE and not VMS */ #if !defined (LDAV_DONE) && defined (LOAD_AVE_TYPE) /* Including VMS. */ if (nelem > 0) loadavg[elem++] = LDAV_CVT (load_ave[0]); if (nelem > 1) loadavg[elem++] = LDAV_CVT (load_ave[1]); if (nelem > 2) loadavg[elem++] = LDAV_CVT (load_ave[2]); #define LDAV_DONE #endif /* !LDAV_DONE && LOAD_AVE_TYPE */ #ifdef LDAV_DONE return elem; #else /* Set errno to zero to indicate that there was no particular error; this function just can't work at all on this system. */ errno = 0; return -1; #endif } #endif /* ! HAVE_GETLOADAVG */ #ifdef TEST void main (argc, argv) int argc; char **argv; { int naptime = 0; if (argc > 1) naptime = atoi (argv[1]); while (1) { double avg[3]; int loads; errno = 0; /* Don't be misled if it doesn't set errno. */ loads = getloadavg (avg, 3); if (loads == -1) { perror ("Error getting load average"); exit (1); } if (loads > 0) printf ("1-minute: %f ", avg[0]); if (loads > 1) printf ("5-minute: %f ", avg[1]); if (loads > 2) printf ("15-minute: %f ", avg[2]); if (loads > 0) putchar ('\n'); if (naptime == 0) break; sleep (naptime); } exit (0); } #endif /* TEST */