view config.bat @ 11667:6945dfa38123

(directory_file_name): Add APOLLO conditional. (Fcopy_file, Fset_file_modes): Delete APOLLO conditionals.

@echo off
rem   ----------------------------------------------------------------------
rem   Configuration script for MSDOS
rem   Copyright (C) 1994 Free Software Foundation, Inc.

rem   This file is part of GNU Emacs.

rem   GNU Emacs is free software; you can redistribute it and/or modify
rem   it under the terms of the GNU General Public License as published by
rem   the Free Software Foundation; either version 2, or (at your option)
rem   any later version.

rem   GNU Emacs is distributed in the hope that it will be useful,
rem   but WITHOUT ANY WARRANTY; without even the implied warranty of
rem   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
rem   GNU General Public License for more details.

rem   You should have received a copy of the GNU General Public License
rem   along with GNU Emacs; see the file COPYING.  If not, write to
rem   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
rem   ----------------------------------------------------------------------
rem   YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:
rem
rem   + msdos version 3 or better.
rem   + djgpp version 1,11 maint 4 or better.
rem   + make utility that allows breaking of the 128 chars limit on
rem     command lines.  ndmake (as of version 4.5) won't work due to a
rem     line length limit.
rem   + rm, mv, chmod (From GNU file utilities).
rem   + sed.
rem
rem   You should be able to get all the above utilities from all
rem   Simtel repositories, e.g., oak.oakland.edu in the directories
rem   "/pub/msdos/djgpp" and "/pub/msdos/gnuish".  As usual, please
rem   use your local mirroring site to reduce trans-Atlantic traffic.
rem   ----------------------------------------------------------------------
set X11=
set nodebug=
:again
if "%1" == "" goto usage
if "%1" == "--with-x" goto withx
if "%1" == "--no-debug" goto nodebug
if "%1" == "msdos" goto msdos
:usage
echo Usage: config [--with-x] [--no-debug] msdos
echo [Read the script before you run it.]
goto end
rem   ----------------------------------------------------------------------
:withx
set X11=Y
shift
goto again
rem   ----------------------------------------------------------------------
:nodebug
set nodebug=Y
shift
goto again
rem   ----------------------------------------------------------------------
:msdos
Echo Checking whether `sed' is available...
Sed -e "w junk.$$$" <Nul
If Exist junk.$$$ Goto sedOk
Echo To configure `Emacs' you need to have `sed'!
Goto End
:sedOk
Echo Checking whether `rm' is available...
rm -f junk.$$$
If Not Exist junk.$$$ Goto rmOk
Echo To configure `Emacs' you need to have `rm'!
Goto End
:rmOk
Echo Checking whether `mv' is available...
rm -f junk.1 junk.2
echo foo >junk.1
mv junk.1 junk.2
If Exist junk.2 Goto mvOk
Echo To configure `Emacs' you need to have `mv'!
rm -f junk.1
Goto End
:mvOk
rm -f junk.2
Echo Checking whether `gcc' is available...
echo main(){} >junk.c
gcc -c junk.c
if exist junk.o goto gccOk
Echo To configure `Emacs' you need to have `gcc'!
rm -f junk.c
Goto End
:gccOk
rm -f junk.c junk.o
Rem   ----------------------------------------------------------------------
Echo Configuring the source directory...
cd src
set PATHSH=paths-h.in
if exist %PATHSH% goto src1
set PATHSH=paths.h-in
if exist %PATHSH% goto src1
echo config: *** The file originally called "src/paths.h.in" cannot be found.
cd ..
goto end
:src1
set CONFIGH=config-h.in
if exist %CONFIGH% goto src2
set CONFIGH=config.h-in
if exist %CONFIGH% goto src2
echo config: *** The file originally called "src/config.h.in" cannot be found.
cd ..
goto end
:src2
set MAKEFILEIN=makefile.in-in
if exist %MAKEFILEIN% goto src3
set MAKEFILEIN=makefile-in.in
if exist %MAKEFILEIN% goto src3
echo makefile: *** The file originally called "src/makefile.in.in" cannot be found.
cd ..
goto end
:src3

rem   Create "paths.h"
sed -f ../msdos/sed4.inp <%PATHSH% >paths.tmp
update paths.tmp paths.h >nul
rm -f paths.tmp

rem   Create "config.h"
rm -f config.h2 config.tmp
cp %CONFIGH% config.tmp
if "%X11%" == "" goto src4
sed -f ../msdos/sed2x.inp <%CONFIGH% >config.tmp
:src4
sed -f ../msdos/sed2.inp <config.tmp >config.h2
update config.h2 config.h >nul
rm -f config.tmp config.h2

rem   On my system dir.h gets in the way.  It's a VMS file so who cares.
if exist dir.h ren dir.h vmsdir.h

rem   Create "makefile" from "makefile.in.in".
rm -f makefile junk.c
sed -e "1,/cpp stuff/s@^# .*$@@" <%MAKEFILEIN% >junk.c
gcc -E junk.c | sed -f ../msdos/sed1.inp >makefile
rm -f junk.c
if "%X11%" == "" goto src5
mv makefile makefile.tmp
sed -f ../msdos/sed1x.inp <makefile.tmp >makefile
rm -f makefile.tmp
:src5

if "%nodebug%" == "" goto src6
sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp
mv -f makefile.tmp makefile
:src6
cd ..
rem   ----------------------------------------------------------------------
Echo Configuring the library source directory...
cd lib-src
set MAKEFILEIN=makefile.in-in
if exist %MAKEFILEIN% goto libsrc1
set MAKEFILEIN=makefile-in.in
if exist %MAKEFILEIN% goto libsrc1
echo makefile: *** The file originally called "lib-src/Makefile.in.in" cannot be found.
cd ..
goto end
:libsrc1
rem   Create "makefile" from "makefile.in".
sed -e "1,/cpp stuff/s@^# .*$@@" <%MAKEFILEIN% >junk.c
gcc -E -I. -I../src junk.c | sed -e "s/^ /	/" -e "/^#/d" -e "/^[ 	]*$/d" >Makefile.new
sed -f ../msdos/sed3.inp <makefile.new >makefile
rm -f makefile.new junk.c
if "%nodebug%" == "" goto libsrc2
sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp
mv -f makefile.tmp makefile
:libsrc2
cd ..
rem   ----------------------------------------------------------------------
if "%X11%" == "" goto oldx1
Echo Configuring the oldxmenu directory...
cd oldxmenu
sed -f ../msdos/sed5x.inp <makefile.in >makefile
if "%nodebug%" == "" goto oldx2
sed -e "/^CFLAGS *=/s/ *-g//" <makefile >makefile.tmp
mv -f makefile.tmp makefile
:oldx2
cd ..
:oldx1
rem   ----------------------------------------------------------------------
Echo Configuring the main directory...
copy msdos\mainmake makefile >nul
rem   ----------------------------------------------------------------------
:end
set X11=
set nodebug=
set MAKEFILEIN=
set PATHSH=
set CONFIGH=