Mercurial > emacs
view man/custom.texi @ 68695:700063953be7
(Picture): Minor cleanup.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Wed, 08 Feb 2006 00:05:36 +0000 |
parents | 05a209d3a8c2 |
children | de0c23e2c38d |
line wrap: on
line source
@c This is part of the Emacs manual. @c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001, @c 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. @c See file emacs.texi for copying conditions. @node Customization, Quitting, Amusements, Top @chapter Customization @cindex customization This chapter talks about various topics relevant to adapting the behavior of Emacs in minor ways. @iftex See @cite{The Emacs Lisp Reference Manual} @end iftex @ifnottex @xref{Top, Emacs Lisp, Emacs Lisp, elisp, The Emacs Lisp Reference Manual}, @end ifnottex for how to make more far-reaching changes. @xref{X Resources}, for information on using X resources to customize Emacs. Customization that you do within Emacs normally affects only the particular Emacs session that you do it in---it does not persist between sessions unless you save the customization in a file such as @file{.emacs} or @file{.Xdefaults} that will affect future sessions. @xref{Init File}. In the customization buffer, when you save customizations for future sessions, this actually works by editing @file{.emacs} for you. Another means of customization is the keyboard macro, which is a sequence of keystrokes to be replayed with a single command. @xref{Keyboard Macros}, for full instruction how to record, manage, and replay sequences of keys. @menu * Minor Modes:: Each minor mode is one feature you can turn on independently of any others. * Easy Customization:: Convenient way to browse and change settings. * Variables:: Many Emacs commands examine Emacs variables to decide what to do; by setting variables, you can control their functioning. * Key Bindings:: The keymaps say what command each key runs. By changing them, you can "redefine keys". * Syntax:: The syntax table controls how words and expressions are parsed. * Init File:: How to write common customizations in the @file{.emacs} file. @end menu @node Minor Modes @section Minor Modes @cindex minor modes @cindex mode, minor Minor modes are optional features which you can turn on or off. For example, Auto Fill mode is a minor mode in which @key{SPC} breaks lines between words as you type. All the minor modes are independent of each other and of the selected major mode. Most minor modes say in the mode line when they are on; for example, @samp{Fill} in the mode line means that Auto Fill mode is on. Append @code{-mode} to the name of a minor mode to get the name of a command that turns the mode on or off. Thus, the command to enable or disable Auto Fill mode is called @code{auto-fill-mode}. These commands are usually invoked with @kbd{M-x}, but you can bind keys to them if you wish. With no argument, the function turns the mode on if it was off and off if it was on. This is known as @dfn{toggling}. A positive argument always turns the mode on, and an explicit zero argument or a negative argument always turns it off. Some minor modes are global: while enabled, they affect everything you do in the Emacs session, in all buffers. Other minor modes are buffer-local; they apply only to the current buffer, so you can enable the mode in certain buffers and not others. For most minor modes, the command name is also the name of a variable. The variable's value is non-@code{nil} if the mode is enabled and @code{nil} if it is disabled. Some minor-mode commands work by just setting the variable. For example, the command @code{abbrev-mode} works by setting the value of @code{abbrev-mode} as a variable; it is this variable that directly turns Abbrev mode on and off. You can directly set the variable's value instead of calling the mode function. For other minor modes, you need to either set the variable through the Customize interface or call the mode function to correctly enable or disable the mode. To check which of these two possibilities applies to a given minor mode, use @kbd{C-h v} to ask for documentation on the variable name. For minor mode commands that work by just setting the minor mode variable, that variable provides a good way for Lisp programs to turn minor modes on and off; it is also useful in a file's local variables list (@pxref{File Variables}). But please think twice before setting minor modes with a local variables list, because most minor modes are a matter of user preference---other users editing the same file might not want the same minor modes you prefer. The most useful buffer-local minor modes include Abbrev mode, Auto Fill mode, Auto Save mode, Font-Lock mode, Glasses mode, ISO Accents mode, Outline minor mode, Overwrite mode, and Binary Overwrite mode. Abbrev mode allows you to define abbreviations that automatically expand as you type them. For example, @samp{amd} might expand to @samp{abbrev mode}. @xref{Abbrevs}, for full information. Auto Fill mode allows you to enter filled text without breaking lines explicitly. Emacs inserts newlines as necessary to prevent lines from becoming too long. @xref{Filling}. Auto Save mode causes the contents of a buffer to be saved periodically to reduce the amount of work you can lose in case of a system crash. @xref{Auto Save}. Enriched mode enables editing and saving of formatted text. @xref{Formatted Text}. Flyspell mode automatically highlights misspelled words. @xref{Spelling}. Font-Lock mode automatically highlights certain textual units found in programs, such as comments, strings, and function names being defined. This requires a graphical display that can show multiple fonts. @xref{Faces}. ISO Accents mode makes the characters @samp{`}, @samp{'}, @samp{"}, @samp{^}, @samp{/} and @samp{~} combine with the following letter, to produce an accented letter in the ISO Latin-1 character set. The newer and more general feature of input methods more or less supersedes ISO Accents mode. @xref{Single-Byte Character Support}. Outline minor mode provides the same facilities as the major mode called Outline mode; but since it is a minor mode instead, you can combine it with any major mode. @xref{Outline Mode}. @cindex Overwrite mode @cindex mode, Overwrite Overwrite mode causes ordinary printing characters to replace existing text instead of shoving it to the right. For example, if point is in front of the @samp{B} in @samp{FOOBAR}, then in Overwrite mode typing a @kbd{G} changes it to @samp{FOOGAR}, instead of producing @samp{FOOGBAR} as usual. In Overwrite mode, the command @kbd{C-q} inserts the next character whatever it may be, even if it is a digit---this gives you a way to insert a character instead of replacing an existing character. @findex overwrite-mode @kindex INSERT The command @code{overwrite-mode} is an exception to the rule that commands which toggle minor modes are normally not bound to keys: it is bound to the @key{INSERT} function key. This is because many other programs bind @key{INSERT} to similar functions. @findex binary-overwrite-mode Binary Overwrite mode is a variant of Overwrite mode for editing binary files; it treats newlines and tabs like other characters, so that they overwrite other characters and can be overwritten by them. In Binary Overwrite mode, digits after @kbd{C-q} specify an octal character code, as usual. Here are some useful minor modes that normally apply to all buffers at once. Since Line Number mode and Transient Mark mode can be enabled or disabled just by setting the value of the minor mode variable, you @emph{can} set them differently for particular buffers, by explicitly making the corresponding variable local in those buffers. @xref{Locals}. Icomplete mode displays an indication of available completions when you are in the minibuffer and completion is active. @xref{Completion Options}. Line Number mode enables continuous display in the mode line of the line number of point, and Column Number mode enables display of the column number. @xref{Mode Line}. Scroll Bar mode gives each window a scroll bar (@pxref{Scroll Bars}). Menu Bar mode gives each frame a menu bar (@pxref{Menu Bars}). Both of these modes are enabled by default when you use the X Window System. In Transient Mark mode, every change in the buffer contents ``deactivates'' the mark, so that commands that operate on the region will get an error. This means you must either set the mark, or explicitly ``reactivate'' it, before each command that uses the region. The advantage of Transient Mark mode is that Emacs can display the region highlighted. @xref{Mark}. @node Easy Customization @section Easy Customization Interface @cindex settings Emacs has many @dfn{settings} which have values that you can specify in order to customize various commands. Many are documented in this manual. Most settings are @dfn{user options}---that is to say, Lisp variables (@pxref{Variables})---so their names appear in the Variable Index (@pxref{Variable Index}). The other settings are faces and their attributes (@pxref{Faces}). @findex customize @cindex customization buffer You can browse interactively through settings and change them using @kbd{M-x customize}. This command creates a @dfn{customization buffer}, which offers commands to navigate through a logically organized structure of the Emacs settings; you can also use it to edit and set their values, and to save settings permanently in your @file{~/.emacs} file (@pxref{Init File}). The appearance of the example buffers in this section is typically different under a graphical display, since faces are then used to indicate buttons, links and editable fields. @menu * Groups: Customization Groups. How settings are classified in a structure. * Browsing: Browsing Custom. Browsing and searching for settings. * Changing a Variable:: How to edit an option's value and set the option. * Saving Customizations:: Specifying the file for saving customizations. * Face Customization:: How to edit the attributes of a face. * Specific Customization:: Making a customization buffer for specific variables, faces, or groups. * Custom Themes:: How to define collections of customized options that can be loaded and unloaded together. @end menu @node Customization Groups @subsection Customization Groups @cindex customization groups For customization purposes, settings are organized into @dfn{groups} to help you find them. Groups are collected into bigger groups, all the way up to a master group called @code{Emacs}. @kbd{M-x customize} creates a customization buffer that shows the top-level @code{Emacs} group and the second-level groups immediately under it. It looks like this, in part: @smallexample /- Emacs group: ---------------------------------------------------\ [State]: visible group members are all at standard values. Customization of the One True Editor. See also [Manual]. Editing group: [Go to Group] Basic text editing facilities. External group: [Go to Group] Interfacing to external utilities. @var{more second-level groups} \- Emacs group end ------------------------------------------------/ @end smallexample @noindent This says that the buffer displays the contents of the @code{Emacs} group. The other groups are listed because they are its contents. But they are listed differently, without indentation and dashes, because @emph{their} contents are not included. Each group has a single-line documentation string; the @code{Emacs} group also has a @samp{[State]} line. @cindex editable fields (customization buffer) @cindex buttons (customization buffer) @cindex links (customization buffer) Most of the text in the customization buffer is read-only, but it typically includes some @dfn{editable fields} that you can edit. There are also @dfn{buttons} and @dfn{links}, which do something when you @dfn{invoke} them. To invoke a button or a link, either click on it with @kbd{Mouse-1}, or move point to it and type @key{RET}. For example, the phrase @samp{[State]} that appears in a second-level group is a button. It operates on the same customization buffer. The phrase @samp{[Go to Group]} is a kind of hypertext link to another group. Invoking it creates a new customization buffer, which shows that group and its contents. The @code{Emacs} group includes a few settings, but mainly it contains other groups, which contain more groups, which contain the settings. By browsing the hierarchy of groups, you will eventually find the feature you are interested in customizing. Then you can use the customization buffer to set that feature's settings. You can also go straight to a particular group by name, using the command @kbd{M-x customize-group}. @node Browsing Custom @subsection Browsing and Searching for Options and Faces @findex customize-browse @kbd{M-x customize-browse} is another way to browse the available settings. This command creates a special customization buffer which shows only the names of groups and settings, and puts them in a structure. In this buffer, you can show the contents of a group by invoking @samp{[+]}. When the group contents are visible, this button changes to @samp{[-]}; invoking that hides the group contents. Each setting in this buffer has a link which says @samp{[Group]}, @samp{[Option]} or @samp{[Face]}. Invoking this link creates an ordinary customization buffer showing just that group and its contents, just that user option, or just that face. This is the way to change settings that you find with @kbd{M-x customize-browse}. If you can guess part of the name of the settings you are interested in, @kbd{M-x customize-apropos} is another way to search for settings. However, unlike @code{customize} and @code{customize-browse}, @code{customize-apropos} can only find groups and settings that are loaded in the current Emacs session. @xref{Specific Customization,, Customizing Specific Items}. @node Changing a Variable @subsection Changing a Variable Here is an example of what a variable (a user option) looks like in the customization buffer: @smallexample Kill Ring Max: [Hide Value] 60 [State]: STANDARD. Maximum length of kill ring before oldest elements are thrown away. @end smallexample The text following @samp{[Hide Value]}, @samp{60} in this case, indicates the current value of the variable. If you see @samp{[Show Value]} instead of @samp{[Hide Value]}, it means that the value is hidden; the customization buffer initially hides values that take up several lines. Invoke @samp{[Show Value]} to show the value. The line after the variable name indicates the @dfn{customization state} of the variable: in the example above, it says you have not changed the option yet. The @samp{[State]} button at the beginning of this line gives you a menu of various operations for customizing the variable. The line after the @samp{[State]} line displays the beginning of the variable's documentation string. If there are more lines of documentation, this line ends with a @samp{[More]} button; invoke that to show the full documentation string. To enter a new value for @samp{Kill Ring Max}, move point to the value and edit it textually. For example, you can type @kbd{M-d}, then insert another number. As you begin to alter the text, you will see the @samp{[State]} line change to say that you have edited the value: @smallexample [State]: EDITED, shown value does not take effect until you set or @r{@dots{}} save it. @end smallexample @cindex settings, how to set Editing the value does not actually set the variable. To do that, you must @dfn{set} the variable. To do this, invoke the @samp{[State]} button and choose @samp{Set for Current Session}. The state of the variable changes visibly when you set it: @smallexample [State]: SET for current session only. @end smallexample You don't have to worry about specifying a value that is not valid; the @samp{Set for Current Session} operation checks for validity and will not install an unacceptable value. @kindex M-TAB @r{(customization buffer)} @findex widget-complete While editing a field that is a file name, directory name, command name, or anything else for which completion is defined, you can type @kbd{M-@key{TAB}} (@code{widget-complete}) to do completion. (@kbd{@key{ESC} @key{TAB}} and @kbd{C-M-i} do the same thing.) Some variables have a small fixed set of possible legitimate values. These variables don't let you edit the value textually. Instead, a @samp{[Value Menu]} button appears before the value; invoke this button to change the value. For a boolean ``on or off'' value, the button says @samp{[Toggle]}, and it changes to the other value. @samp{[Value Menu]} and @samp{[Toggle]} simply edit the buffer; the changes take real effect when you use the @samp{Set for Current Session} operation. Some variables have values with complex structure. For example, the value of @code{file-coding-system-alist} is an association list. Here is how it appears in the customization buffer: @smallexample File Coding System Alist: [Hide Value] [INS] [DEL] File regexp: \.elc\' Choice: [Value Menu] Encoding/decoding pair: Decoding: emacs-mule Encoding: emacs-mule [INS] [DEL] File regexp: \(\`\|/\)loaddefs.el\' Choice: [Value Menu] Encoding/decoding pair: Decoding: raw-text Encoding: raw-text-unix [INS] [DEL] File regexp: \.tar\' Choice: [Value Menu] Encoding/decoding pair: Decoding: no-conversion Encoding: no-conversion [INS] [DEL] File regexp: Choice: [Value Menu] Encoding/decoding pair: Decoding: undecided Encoding: nil [INS] [State]: STANDARD. Alist to decide a coding system to use for a file I/O @r{@dots{}} operation. [Hide Rest] The format is ((PATTERN . VAL) ...), where PATTERN is a regular expression matching a file name, @r{[@dots{}more lines of documentation@dots{}]} @end smallexample @noindent Each association in the list appears on four lines, with several editable fields and/or buttons. You can edit the regexps and coding systems using ordinary editing commands. You can also invoke @samp{[Value Menu]} to switch to a different kind of value---for instance, to specify a function instead of a pair of coding systems. To delete an association from the list, invoke the @samp{[DEL]} button for that item. To add an association, invoke @samp{[INS]} at the position where you want to add it. There is an @samp{[INS]} button between each pair of association, another at the beginning and another at the end, so you can add the new association at any position in the list. @kindex TAB @r{(customization buffer)} @kindex S-TAB @r{(customization buffer)} @findex widget-forward @findex widget-backward Two special commands, @key{TAB} and @kbd{S-@key{TAB}}, are useful for moving through the customization buffer. @key{TAB} (@code{widget-forward}) moves forward to the next button or editable field; @kbd{S-@key{TAB}} (@code{widget-backward}) moves backward to the previous button or editable field. Typing @key{RET} on an editable field also moves forward, just like @key{TAB}. We set it up this way because people often type @key{RET} when they are finished editing a field. To insert a newline within an editable field, use @kbd{C-o} or @kbd{C-q C-j}. @cindex saving a setting @cindex settings, how to save Setting the variable changes its value in the current Emacs session; @dfn{saving} the value changes it for future sessions as well. To save the variable, invoke @samp{[State]} and select the @samp{Save for Future Sessions} operation. This works by writing code so as to set the variable again, each time you start Emacs (@pxref{Saving Customizations}). You can also restore the variable to its standard value by invoking @samp{[State]} and selecting the @samp{Erase Customization} operation. There are actually four reset operations: @table @samp @item Undo Edits If you have made some modifications and not yet set the variable, this restores the text in the customization buffer to match the actual value. @item Reset to Saved This restores the value of the variable to the last saved value, and updates the text accordingly. @item Erase Customization This sets the variable to its standard value, and updates the text accordingly. This also eliminates any saved value for the variable, so that you will get the standard value in future Emacs sessions. @item Set to Backup Value This sets the variable to a previous value that was set in the customization buffer in this session. If you customize a variable and then reset it, which discards the customized value, you can get the customized value back again with this operation. @end table @cindex comments on customized options Sometimes it is useful to record a comment about a specific customization. Use the @samp{Add Comment} item from the @samp{[State]} menu to create a field for entering the comment. The comment you enter will be saved, and displayed again if you again view the same variable in a customization buffer, even in another session. The state of a group indicates whether anything in that group has been edited, set or saved. Near the top of the customization buffer there are two lines of buttons: @smallexample [Set for Current Session] [Save for Future Sessions] [Undo Edits] [Reset to Saved] [Erase Customization] [Finish] @end smallexample @vindex custom-buffer-done-function @noindent Invoking @samp{[Finish]} either buries or kills this customization buffer according to the setting of the option @code{custom-buffer-done-kill}; the default is to bury the buffer. Each of the other buttons performs an operation---set, save or reset---on each of the settings in the buffer that could meaningfully be set, saved or reset. They do not operate on settings whose values are hidden, nor on subgroups not visible in the buffer. @node Saving Customizations @subsection Saving Customizations @vindex custom-file The customization buffer normally saves customizations in @file{~/.emacs}. If you wish, you can save customizations in another file instead. To make this work, your @file{~/.emacs} should set @code{custom-file} to the name of that file. Then you should load the file by calling @code{load}. For example: @example (setq custom-file "~/.emacs-custom.el") (load custom-file) @end example You can also use @code{custom-file} to specify different customization files for different Emacs versions, like this: @example (cond ((< emacs-major-version 21) ;; @r{Emacs 20 customization.} (setq custom-file "~/.custom-20.el")) ((and (= emacs-major-version 21) (< emacs-minor-version 4)) ;; @r{Emacs 21 customization, before version 21.4.} (setq custom-file "~/.custom-21.el")) ((< emacs-major-version 22) ;; @r{Emacs version 21.4 or later.} (setq custom-file "~/.custom-21.4.el")) (t ;; @r{Emacs version 22.1 or later.} (setq custom-file "~/.custom-22.el"))) (load custom-file) @end example If Emacs was invoked with the @option{-q} or @option{--no-init-file} options (@pxref{Initial Options}), it will not let you save your customizations in your @file{~/.emacs} init file. This is because saving customizations from such a session would wipe out all the other customizations you might have on your init file. @node Face Customization @subsection Customizing Faces @cindex customizing faces @cindex bold font @cindex italic font @cindex fonts and faces In addition to variables, some customization groups also include faces. When you show the contents of a group, both the variables and the faces in the group appear in the customization buffer. Here is an example of how a face looks: @smallexample Custom Changed Face:(sample) [Hide Face] [State]: STANDARD. Face used when the customize item has been changed. Parent groups: [Custom Magic Faces] Attributes: [ ] Font Family: * [ ] Width: * [ ] Height: * [ ] Weight: * [ ] Slant: * [ ] Underline: * [ ] Overline: * [ ] Strike-through: * [ ] Box around text: * [ ] Inverse-video: * [X] Foreground: white (sample) [X] Background: blue (sample) [ ] Stipple: * [ ] Inherit: * @end smallexample Each face attribute has its own line. The @samp{[@var{x}]} button before the attribute name indicates whether the attribute is @dfn{enabled}; @samp{[X]} means that it's enabled, and @samp{[ ]} means that it's disabled. You can enable or disable the attribute by clicking that button. When the attribute is enabled, you can change the attribute value in the usual ways. For the colors, you can specify a color name (use @kbd{M-x list-colors-display} for a list of them) or a hexadecimal color specification of the form @samp{#@var{rr}@var{gg}@var{bb}}. (@samp{#000000} is black, @samp{#ff0000} is red, @samp{#00ff00} is green, @samp{#0000ff} is blue, and @samp{#ffffff} is white.) On a black-and-white display, the colors you can use for the background are @samp{black}, @samp{white}, @samp{gray}, @samp{gray1}, and @samp{gray3}. Emacs supports these shades of gray by using background stipple patterns instead of a color. Setting, saving and resetting a face work like the same operations for variables (@pxref{Changing a Variable}). A face can specify different appearances for different types of display. For example, a face can make text red on a color display, but use a bold font on a monochrome display. To specify multiple appearances for a face, select @samp{For All Kinds of Displays} in the menu you get from invoking @samp{[State]}. @findex modify-face Another more basic way to set the attributes of a specific face is with @kbd{M-x modify-face}. This command reads the name of a face, then reads the attributes one by one. For the color and stipple attributes, the attribute's current value is the default---type just @key{RET} if you don't want to change that attribute. Type @samp{none} if you want to clear out the attribute. @node Specific Customization @subsection Customizing Specific Items Instead of finding the setting you want to change by navigating the structure of groups, here are other ways to specify the settings that you want to customize. @table @kbd @item M-x customize-variable @key{RET} @var{variable} @key{RET} Set up a customization buffer with just one variable, @var{variable}. @item M-x customize-face @key{RET} @var{face} @key{RET} Set up a customization buffer with just one face, @var{face}. @item M-x customize-group @key{RET} @var{group} @key{RET} Set up a customization buffer with just one group, @var{group}. @item M-x customize-apropos @key{RET} @var{regexp} @key{RET} Set up a customization buffer with all the settings and groups that match @var{regexp}. @item M-x customize-changed-options @key{RET} @var{version} @key{RET} Set up a customization buffer with all the settings and groups whose meaning has changed since Emacs version @var{version}. @item M-x customize-saved Set up a customization buffer containing all settings that you have saved with customization buffers. @item M-x customize-customized Set up a customization buffer containing all settings that you have customized but not saved. @end table @findex customize-variable If you want to alter a particular variable with the customization buffer, and you know its name, you can use the command @kbd{M-x customize-variable} and specify the variable name. This sets up the customization buffer with just one variable---the one that you asked for. Editing, setting and saving the value work as described above, but only for the specified variable. Minibuffer completion is handy if you only know part of the name. However, this command can only see options that have been loaded in the current Emacs session. @findex customize-face Likewise, you can modify a specific face, chosen by name, using @kbd{M-x customize-face}. By default it operates on the face used on the character after point. @findex customize-group You can also set up the customization buffer with a specific group, using @kbd{M-x customize-group}. The immediate contents of the chosen group, including variables, faces, and other groups, all appear as well (even if not already loaded). However, the subgroups' own contents are not included. @findex customize-apropos To control more precisely what to customize, you can use @kbd{M-x customize-apropos}. You specify a regular expression as argument; then all @emph{loaded} settings and groups whose names match this regular expression are set up in the customization buffer. If you specify an empty regular expression, this includes @emph{all} loaded groups and settings---which takes a long time to set up. @findex customize-changed When you upgrade to a new Emacs version, you might want to customize new settings and settings whose meanings or default values have changed. To do this, use @kbd{M-x customize-changed} and specify a previous Emacs version number using the minibuffer. It creates a customization buffer which shows all the settings and groups whose definitions have been changed since the specified version, loading them if necessary. @findex customize-saved @findex customize-customized If you change settings and then decide the change was a mistake, you can use two special commands to revisit your previous changes. Use @kbd{M-x customize-saved} to look at the settings that you have saved. Use @kbd{M-x customize-customized} to look at the settings that you have set but not saved. @node Custom Themes @subsection Customization Themes @cindex custom themes @dfn{Custom themes} are collections of settings that can be enabled or disabled as a unit. You can use Custom themes to switch quickly and easily between various collections of settings, and to transfer such collections from one computer to another. @findex customize-create-theme To define a Custom theme, use @kbd{M-x customize-create-theme}, which brings up a buffer named @samp{*New Custom Theme*}. At the top of the buffer is an editable field where you can specify the name of the theme. Click on the button labelled @samp{Insert Variable} to add a variable to the theme, and click on @samp{Insert Face} to add a face. You can edit these values in the @samp{*New Custom Theme*} buffer like in an ordinary Customize buffer. To remove an option from the theme, click on its @samp{State} button and select @samp{Delete}. @vindex custom-theme-directory After adding the desired options, click on @samp{Save Theme} to save the Custom theme. This writes the theme definition to a file @file{@var{foo}-theme.el} (where @var{foo} is the theme name you supplied), in the directory @file{~/.emacs.d/}. You can specify the directory by setting @code{custom-theme-directory}. You can view and edit the settings of a previously-defined theme by clicking on @samp{Visit Theme} and specifying the theme name. You can also import the variables and faces that you have set using Customize by visiting the ``special'' theme named @samp{user}. This theme, which records all the options that you set in the ordinary customization buffer, is always enabled, and always takes precedence over all other enabled Custom themes. Additionally, the @samp{user} theme is recorded in your @file{.emacs} file, rather than a @file{user-theme.el} file. @vindex custom-enabled-themes Once you have defined a Custom theme, you can use it by customizing the variable @code{custom-enabled-themes}. This is a list of Custom themes that are @dfn{enabled}, or put into effect. If you set @code{custom-enabled-themes} using the Customize interface, the theme definitions are automatically loaded from the theme files, if they aren't already. If you save the value of @code{custom-enabled-themes} for future Emacs sessions, those Custom themes will be enabled whenever Emacs is started up. If two enabled themes specify different values for an option, the theme occurring earlier in @code{custom-enabled-themes} takes effect. @findex load-theme @findex enable-theme @findex disable-theme You can temporarily enable a Custom theme with @kbd{M-x enable-theme}. This prompts for a theme name in the minibuffer, loads the theme from the theme file if necessary, and enables the theme. You can @dfn{disabled} any enabled theme with the command @kbd{M-x disable-theme}; this returns the options specified in the theme to their original values. To re-enable the theme, type @kbd{M-x enable-theme} again. If a theme file is changed during your Emacs session, you can reload it by typing @kbd{M-x load-theme}. (This also enables the theme.) @node Variables @section Variables @cindex variable @cindex option, user @cindex user option A @dfn{variable} is a Lisp symbol which has a value. The symbol's name is also called the name of the variable. A variable name can contain any characters that can appear in a file, but conventionally variable names consist of words separated by hyphens. A variable can have a documentation string which describes what kind of value it should have and how the value will be used. Emacs Lisp allows any variable (with a few exceptions) to have any kind of value, but most variables that Emacs uses need a value of a certain type. Often the value should always be a string, or should always be a number. Sometimes we say that a certain feature is turned on if a variable is ``non-@code{nil},'' meaning that if the variable's value is @code{nil}, the feature is off, but the feature is on for @emph{any} other value. The conventional value to use to turn on the feature---since you have to pick one particular value when you set the variable---is @code{t}. Emacs uses many Lisp variables for internal record keeping, but the most interesting variables for a non-programmer user are those meant for users to change---the @dfn{user options}. Each user option that you can set with the customization buffer is in fact a Lisp variable. Emacs does not (usually) change the values of these variables; instead, you set the values, and thereby alter and control the behavior of certain Emacs commands. Use of the customization buffer is explained above (@pxref{Easy Customization}); here we describe other aspects of Emacs variables. @menu * Examining:: Examining or setting one variable's value. * Hooks:: Hook variables let you specify programs for parts of Emacs to run on particular occasions. * Locals:: Per-buffer values of variables. * File Variables:: How files can specify variable values. @end menu @node Examining @subsection Examining and Setting Variables @cindex setting variables @table @kbd @item C-h v @var{var} @key{RET} Display the value and documentation of variable @var{var} (@code{describe-variable}). @item M-x set-variable @key{RET} @var{var} @key{RET} @var{value} @key{RET} Change the value of variable @var{var} to @var{value}. @end table To examine the value of a single variable, use @kbd{C-h v} (@code{describe-variable}), which reads a variable name using the minibuffer, with completion. It displays both the value and the documentation of the variable. For example, @example C-h v fill-column @key{RET} @end example @noindent displays something like this: @smallexample fill-column's value is 70 Documentation: *Column beyond which automatic line-wrapping should happen. Automatically becomes buffer-local when set in any fashion. @end smallexample @noindent The star at the beginning of the documentation indicates that this variable is a user option. @kbd{C-h v} is not restricted to user options; it allows any variable name. @findex set-variable The most convenient way to set a specific user option variable is with @kbd{M-x set-variable}. This reads the variable name with the minibuffer (with completion), and then reads a Lisp expression for the new value using the minibuffer a second time (you can insert the old value into the minibuffer for editing via @kbd{M-n}). For example, @example M-x set-variable @key{RET} fill-column @key{RET} 75 @key{RET} @end example @noindent sets @code{fill-column} to 75. @kbd{M-x set-variable} is limited to user option variables, but you can set any variable with a Lisp expression, using the function @code{setq}. Here is a @code{setq} expression to set @code{fill-column}: @example (setq fill-column 75) @end example To execute an expression like this one, go to the @samp{*scratch*} buffer, type in the expression, and then type @kbd{C-j}. @xref{Lisp Interaction}. Setting variables, like all means of customizing Emacs except where otherwise stated, affects only the current Emacs session. The only way to alter the variable in future sessions is to put something in the @file{~/.emacs} file to set it those sessions (@pxref{Init File}). @node Hooks @subsection Hooks @cindex hook @cindex running a hook @dfn{Hooks} are an important mechanism for customization of Emacs. A hook is a Lisp variable which holds a list of functions, to be called on some well-defined occasion. (This is called @dfn{running the hook}.) The individual functions in the list are called the @dfn{hook functions} of the hook. With rare exceptions, hooks in Emacs are empty when Emacs starts up, so the only hook functions in any given hook are the ones you explicitly put there as customization. Most major modes run one or more @dfn{mode hooks} as the last step of initialization. This makes it easy for you to customize the behavior of the mode, by setting up a hook function to override the local variable assignments already made by the mode. But hooks are also used in other contexts. For example, the hook @code{suspend-hook} runs just before Emacs suspends itself (@pxref{Exiting}). @cindex normal hook Most Emacs hooks are @dfn{normal hooks}. This means that running the hook operates by calling all the hook functions, unconditionally, with no arguments. We have made an effort to keep most hooks normal so that you can use them in a uniform way. Every variable in Emacs whose name ends in @samp{-hook} is a normal hook. @cindex abnormal hook There are also a few @dfn{abnormal hooks}. These variables' names end in @samp{-hooks} or @samp{-functions}, instead of @samp{-hook}. What makes these hooks abnormal is that there is something peculiar about the way its functions are called---perhaps they are given arguments, or perhaps the values they return are used in some way. For example, @code{find-file-not-found-functions} (@pxref{Visiting}) is abnormal because as soon as one hook function returns a non-@code{nil} value, the rest are not called at all. The documentation of each abnormal hook variable explains in detail what is peculiar about it. You can set a hook variable with @code{setq} like any other Lisp variable, but the recommended way to add a hook function to a hook (either normal or abnormal) is by calling @code{add-hook}. You can specify any valid Lisp function as the hook function, provided it can handle the proper number of arguments (zero arguments, in the case of a normal hook). Of course, not every Lisp function is @emph{useful} in any particular hook. For example, here's how to set up a hook to turn on Auto Fill mode when entering Text mode and other modes based on Text mode: @example (add-hook 'text-mode-hook 'turn-on-auto-fill) @end example The next example shows how to use a hook to customize the indentation of C code. (People often have strong personal preferences for one format compared to another.) Here the hook function is an anonymous lambda expression. @example @group (setq my-c-style '((c-comment-only-line-offset . 4) @end group @group (c-cleanup-list . (scope-operator empty-defun-braces defun-close-semi)) @end group @group (c-offsets-alist . ((arglist-close . c-lineup-arglist) (substatement-open . 0))))) @end group @group (add-hook 'c-mode-common-hook '(lambda () (c-add-style "my-style" my-c-style t))) @end group @end example It is best to design your hook functions so that the order in which they are executed does not matter. Any dependence on the order is ``asking for trouble.'' However, the order is predictable: the most recently added hook functions are executed first. If you play with adding various different versions of a hook function by calling @code{add-hook} over and over, remember that all the versions you added will remain in the hook variable together. You can clear out individual functions with @code{remove-hook}, or do @code{(setq @var{hook-variable} nil)} to remove everything. @node Locals @subsection Local Variables @table @kbd @item M-x make-local-variable @key{RET} @var{var} @key{RET} Make variable @var{var} have a local value in the current buffer. @item M-x kill-local-variable @key{RET} @var{var} @key{RET} Make variable @var{var} use its global value in the current buffer. @item M-x make-variable-buffer-local @key{RET} @var{var} @key{RET} Mark variable @var{var} so that setting it will make it local to the buffer that is current at that time. @end table @cindex local variables Almost any variable can be made @dfn{local} to a specific Emacs buffer. This means that its value in that buffer is independent of its value in other buffers. A few variables are always local in every buffer. Every other Emacs variable has a @dfn{global} value which is in effect in all buffers that have not made the variable local. @findex make-local-variable @kbd{M-x make-local-variable} reads the name of a variable and makes it local to the current buffer. Further changes in this buffer will not affect others, and further changes in the global value will not affect this buffer. @findex make-variable-buffer-local @cindex per-buffer variables @kbd{M-x make-variable-buffer-local} reads the name of a variable and changes the future behavior of the variable so that it will become local automatically when it is set. More precisely, once a variable has been marked in this way, the usual ways of setting the variable automatically do @code{make-local-variable} first. We call such variables @dfn{per-buffer} variables. Major modes (@pxref{Major Modes}) always make variables local to the buffer before setting the variables. This is why changing major modes in one buffer has no effect on other buffers. Minor modes also work by setting variables---normally, each minor mode has one controlling variable which is non-@code{nil} when the mode is enabled (@pxref{Minor Modes}). For most minor modes, the controlling variable is per buffer. Emacs contains a number of variables that are always per-buffer. These include @code{abbrev-mode}, @code{auto-fill-function}, @code{case-fold-search}, @code{comment-column}, @code{ctl-arrow}, @code{fill-column}, @code{fill-prefix}, @code{indent-tabs-mode}, @code{left-margin}, @code{mode-line-format}, @code{overwrite-mode}, @code{selective-display-ellipses}, @code{selective-display}, @code{tab-width}, and @code{truncate-lines}. Some other variables are always local in every buffer, but they are used for internal purposes.@refill A few variables cannot be local to a buffer because they are always local to each display instead (@pxref{Multiple Displays}). If you try to make one of these variables buffer-local, you'll get an error message. @findex kill-local-variable @kbd{M-x kill-local-variable} reads the name of a variable and makes it cease to be local to the current buffer. The global value of the variable henceforth is in effect in this buffer. Setting the major mode kills all the local variables of the buffer except for a few variables specially marked as @dfn{permanent locals}. @findex setq-default To set the global value of a variable, regardless of whether the variable has a local value in the current buffer, you can use the Lisp construct @code{setq-default}. This construct is used just like @code{setq}, but it sets variables' global values instead of their local values (if any). When the current buffer does have a local value, the new global value may not be visible until you switch to another buffer. Here is an example: @example (setq-default fill-column 75) @end example @noindent @code{setq-default} is the only way to set the global value of a variable that has been marked with @code{make-variable-buffer-local}. @findex default-value Lisp programs can use @code{default-value} to look at a variable's default value. This function takes a symbol as argument and returns its default value. The argument is evaluated; usually you must quote it explicitly. For example, here's how to obtain the default value of @code{fill-column}: @example (default-value 'fill-column) @end example @node File Variables @subsection Local Variables in Files @cindex local variables in files @cindex file local variables A file can specify local variable values for use when you edit the file with Emacs. Visiting the file checks for local variable specifications; it automatically makes these variables local to the buffer, and sets them to the values specified in the file. There are two ways to specify local variable values: in the first line, or with a local variables list. Here's how to specify them in the first line: @example -*- mode: @var{modename}; @var{var}: @var{value}; @dots{} -*- @end example @noindent You can specify any number of variables/value pairs in this way, each pair with a colon and semicolon as shown above. @code{mode: @var{modename};} specifies the major mode; this should come first in the line. The @var{value}s are not evaluated; they are used literally. Here is an example that specifies Lisp mode and sets two variables with numeric values: @smallexample ;; -*- mode: Lisp; fill-column: 75; comment-column: 50; -*- @end smallexample You can also specify the coding system for a file in this way: just specify a value for the ``variable'' named @code{coding}. The ``value'' must be a coding system name that Emacs recognizes. @xref{Coding Systems}. @w{@samp{unibyte: t}} specifies unibyte loading for a particular Lisp file. @xref{Enabling Multibyte}. The @code{eval} pseudo-variable, described below, can be specified in the first line as well. @cindex shell scripts, and local file variables In shell scripts, the first line is used to identify the script interpreter, so you cannot put any local variables there. To accommodate for this, when Emacs visits a shell script, it looks for local variable specifications in the @emph{second} line. A @dfn{local variables list} goes near the end of the file, in the last page. (It is often best to put it on a page by itself.) The local variables list starts with a line containing the string @samp{Local Variables:}, and ends with a line containing the string @samp{End:}. In between come the variable names and values, one set per line, as @samp{@var{variable}:@: @var{value}}. The @var{value}s are not evaluated; they are used literally. If a file has both a local variables list and a @samp{-*-} line, Emacs processes @emph{everything} in the @samp{-*-} line first, and @emph{everything} in the local variables list afterward. Here is an example of a local variables list: @example ;;; Local Variables: *** ;;; mode:lisp *** ;;; comment-column:0 *** ;;; comment-start: ";;; " *** ;;; comment-end:"***" *** ;;; End: *** @end example As you see, each line starts with the prefix @samp{;;; } and each line ends with the suffix @samp{ ***}. Emacs recognizes these as the prefix and suffix based on the first line of the list, by finding them surrounding the magic string @samp{Local Variables:}; then it automatically discards them from the other lines of the list. The usual reason for using a prefix and/or suffix is to embed the local variables list in a comment, so it won't confuse other programs that the file is intended as input for. The example above is for a language where comment lines start with @samp{;;; } and end with @samp{***}; the local values for @code{comment-start} and @code{comment-end} customize the rest of Emacs for this unusual syntax. Don't use a prefix (or a suffix) if you don't need one. If you write a multi-line string value, you should put the prefix and suffix on each line, even lines that start or end within the string. They will be stripped off for processing the list. If you want to split a long string across multiple lines of the file, you can use backslash-newline, which is ignored in Lisp string constants. Here's an example of doing this: @example # Local Variables: # compile-command: "cc foo.c -Dfoo=bar -Dhack=whatever \ # -Dmumble=blaah" # End: @end example Some ``variable names'' have special meanings in a local variables list. Specifying the ``variable'' @code{mode} really sets the major mode, while any value specified for the ``variable'' @code{eval} is simply evaluated as an expression (its value is ignored). A value for @code{coding} specifies the coding system for character code conversion of this file, and a value of @code{t} for @code{unibyte} says to visit the file in a unibyte buffer. These four ``variables'' are not really variables; setting them in any other context has no special meaning. @emph{If @code{mode} is used to set a major mode, it should be the first ``variable'' in the list.} Otherwise, the entries that precede it will usually be ignored, since most modes kill all local variables as part of their initialization. You can use the @code{mode} ``variable'' to set minor modes as well as the major modes; in fact, you can use it more than once, first to set the major mode and then to set minor modes which are specific to particular buffers. But most minor modes should not be specified in the file at all, regardless of how, because they represent user preferences. For example, you may be tempted to try to turn on Auto Fill mode with a local variable list. That is a mistake. The choice of Auto Fill mode or not is a matter of individual taste, not a matter of the contents of particular files. If you want to use Auto Fill, set up major mode hooks with your @file{.emacs} file to turn it on (when appropriate) for you alone (@pxref{Init File}). Don't use a local variable list to impose your taste on everyone. The start of the local variables list must be no more than 3000 characters from the end of the file, and must be in the last page if the file is divided into pages. Otherwise, Emacs will not notice it is there. The purpose of this rule is so that a stray @samp{Local Variables:}@: not in the last page does not confuse Emacs, and so that visiting a long file that is all one page and has no local variables list need not take the time to search the whole file. Use the command @code{normal-mode} to reset the local variables and major mode of a buffer according to the file name and contents, including the local variables list if any. @xref{Choosing Modes}. @findex enable-local-variables The variable @code{enable-local-variables} controls whether to process local variables in files, and thus gives you a chance to override them. Its default value is @code{t}, which means do process local variables in files. If you set the value to @code{nil}, Emacs simply ignores local variables in files. Any other value says to query you about each file that has local variables, showing you the local variable specifications so you can judge. @findex enable-local-eval The @code{eval} ``variable,'' and certain actual variables, create a special risk; when you visit someone else's file, local variable specifications for these could affect your Emacs in arbitrary ways. Therefore, the variable @code{enable-local-eval} controls whether Emacs processes @code{eval} variables, as well variables with names that end in @samp{-hook}, @samp{-hooks}, @samp{-function} or @samp{-functions}, and certain other variables. The three possibilities for the variable's value are @code{t}, @code{nil}, and anything else, just as for @code{enable-local-variables}. The default is @code{maybe}, which is neither @code{t} nor @code{nil}, so normally Emacs does ask for confirmation about file settings for these variables. @findex safe-local-eval-forms The @code{safe-local-eval-forms} is a customizable list of eval forms which are safe to eval, so Emacs should not ask for confirmation to evaluate these forms, even if @code{enable-local-variables} says to ask for confirmation in general. @node Key Bindings @section Customizing Key Bindings @cindex key bindings This section describes @dfn{key bindings}, which map keys to commands, and @dfn{keymaps}, which record key bindings. It also explains how to customize key bindings. Recall that a command is a Lisp function whose definition provides for interactive use. Like every Lisp function, a command has a function name which usually consists of lower-case letters and hyphens. @menu * Keymaps:: Generalities. The global keymap. * Prefix Keymaps:: Keymaps for prefix keys. * Local Keymaps:: Major and minor modes have their own keymaps. * Minibuffer Maps:: The minibuffer uses its own local keymaps. * Rebinding:: How to redefine one key's meaning conveniently. * Init Rebinding:: Rebinding keys with your init file, @file{.emacs}. * Function Keys:: Rebinding terminal function keys. * Named ASCII Chars:: Distinguishing @key{TAB} from @kbd{C-i}, and so on. * Non-ASCII Rebinding:: Rebinding non-@acronym{ASCII} characters such as Latin-1. * Mouse Buttons:: Rebinding mouse buttons in Emacs. * Disabling:: Disabling a command means confirmation is required before it can be executed. This is done to protect beginners from surprises. @end menu @node Keymaps @subsection Keymaps @cindex keymap The bindings between key sequences and command functions are recorded in data structures called @dfn{keymaps}. Emacs has many of these, each used on particular occasions. Recall that a @dfn{key sequence} (@dfn{key}, for short) is a sequence of @dfn{input events} that have a meaning as a unit. Input events include characters, function keys and mouse buttons---all the inputs that you can send to the computer with your terminal. A key sequence gets its meaning from its @dfn{binding}, which says what command it runs. The function of keymaps is to record these bindings. @cindex global keymap The @dfn{global} keymap is the most important keymap because it is always in effect. The global keymap defines keys for Fundamental mode; most of these definitions are common to most or all major modes. Each major or minor mode can have its own keymap which overrides the global definitions of some keys. For example, a self-inserting character such as @kbd{g} is self-inserting because the global keymap binds it to the command @code{self-insert-command}. The standard Emacs editing characters such as @kbd{C-a} also get their standard meanings from the global keymap. Commands to rebind keys, such as @kbd{M-x global-set-key}, actually work by storing the new binding in the proper place in the global map. @xref{Rebinding}. Meta characters work differently; Emacs translates each Meta character into a pair of characters starting with @key{ESC}. When you type the character @kbd{M-a} in a key sequence, Emacs replaces it with @kbd{@key{ESC} a}. A meta key comes in as a single input event, but becomes two events for purposes of key bindings. The reason for this is historical, and we might change it someday. @cindex function key Most modern keyboards have function keys as well as character keys. Function keys send input events just as character keys do, and keymaps can have bindings for them. On text terminals, typing a function key actually sends the computer a sequence of characters; the precise details of the sequence depends on which function key and on the model of terminal you are using. (Often the sequence starts with @kbd{@key{ESC} [}.) If Emacs understands your terminal type properly, it recognizes the character sequences forming function keys wherever they occur in a key sequence (not just at the beginning). Thus, for most purposes, you can pretend the function keys reach Emacs directly and ignore their encoding as character sequences. @cindex mouse Mouse buttons also produce input events. These events come with other data---the window and position where you pressed or released the button, and a time stamp. But only the choice of button matters for key bindings; the other data matters only if a command looks at it. (Commands designed for mouse invocation usually do look at the other data.) A keymap records definitions for single events. Interpreting a key sequence of multiple events involves a chain of keymaps. The first keymap gives a definition for the first event; this definition is another keymap, which is used to look up the second event in the sequence, and so on. Key sequences can mix function keys and characters. For example, @kbd{C-x @key{SELECT}} is meaningful. If you make @key{SELECT} a prefix key, then @kbd{@key{SELECT} C-n} makes sense. You can even mix mouse events with keyboard events, but we recommend against it, because such key sequences are inconvenient to use. As a user, you can redefine any key; but it is usually best to stick to key sequences that consist of @kbd{C-c} followed by a letter (upper or lower case). These keys are ``reserved for users,'' so they won't conflict with any properly designed Emacs extension. The function keys @key{F5} through @key{F9} are also reserved for users. If you redefine some other key, your definition may be overridden by certain extensions or major modes which redefine the same key. @node Prefix Keymaps @subsection Prefix Keymaps A prefix key such as @kbd{C-x} or @key{ESC} has its own keymap, which holds the definition for the event that immediately follows that prefix. The definition of a prefix key is usually the keymap to use for looking up the following event. The definition can also be a Lisp symbol whose function definition is the following keymap; the effect is the same, but it provides a command name for the prefix key that can be used as a description of what the prefix key is for. Thus, the binding of @kbd{C-x} is the symbol @code{Control-X-prefix}, whose function definition is the keymap for @kbd{C-x} commands. The definitions of @kbd{C-c}, @kbd{C-x}, @kbd{C-h} and @key{ESC} as prefix keys appear in the global map, so these prefix keys are always available. Aside from ordinary prefix keys, there is a fictitious ``prefix key'' which represents the menu bar; see @ref{Menu Bar,,,elisp, The Emacs Lisp Reference Manual}, for special information about menu bar key bindings. Mouse button events that invoke pop-up menus are also prefix keys; see @ref{Menu Keymaps,,,elisp, The Emacs Lisp Reference Manual}, for more details. Some prefix keymaps are stored in variables with names: @itemize @bullet @item @vindex ctl-x-map @code{ctl-x-map} is the variable name for the map used for characters that follow @kbd{C-x}. @item @vindex help-map @code{help-map} is for characters that follow @kbd{C-h}. @item @vindex esc-map @code{esc-map} is for characters that follow @key{ESC}. Thus, all Meta characters are actually defined by this map. @item @vindex ctl-x-4-map @code{ctl-x-4-map} is for characters that follow @kbd{C-x 4}. @item @vindex mode-specific-map @code{mode-specific-map} is for characters that follow @kbd{C-c}. @end itemize @node Local Keymaps @subsection Local Keymaps @cindex local keymap So far we have explained the ins and outs of the global map. Major modes customize Emacs by providing their own key bindings in @dfn{local keymaps}. For example, C mode overrides @key{TAB} to make it indent the current line for C code. Portions of text in the buffer can specify their own keymaps to substitute for the keymap of the buffer's major mode. @cindex minor mode keymap Minor modes can also have local keymaps. Whenever a minor mode is in effect, the definitions in its keymap override both the major mode's local keymap and the global keymap. @vindex c-mode-map @vindex lisp-mode-map The local keymaps for Lisp mode and several other major modes always exist even when not in use. These are kept in variables named @code{lisp-mode-map} and so on. For major modes less often used, the local keymap is normally constructed only when the mode is used for the first time in a session. This is to save space. If you wish to change one of these keymaps, you must use the major mode's @dfn{mode hook}---see below. All minor mode keymaps are created in advance. There is no way to defer their creation until the first time the minor mode is enabled. A local keymap can locally redefine a key as a prefix key by defining it as a prefix keymap. If the key is also defined globally as a prefix, then its local and global definitions (both keymaps) effectively combine: both of them are used to look up the event that follows the prefix key. Thus, if the mode's local keymap defines @kbd{C-c} as another keymap, and that keymap defines @kbd{C-z} as a command, this provides a local meaning for @kbd{C-c C-z}. This does not affect other sequences that start with @kbd{C-c}; if those sequences don't have their own local bindings, their global bindings remain in effect. Another way to think of this is that Emacs handles a multi-event key sequence by looking in several keymaps, one by one, for a binding of the whole key sequence. First it checks the minor mode keymaps for minor modes that are enabled, then it checks the major mode's keymap, and then it checks the global keymap. This is not precisely how key lookup works, but it's good enough for understanding ordinary circumstances. @cindex rebinding major mode keys @findex define-key To change the local bindings of a major mode, you must change the mode's local keymap. Normally you must wait until the first time the mode is used, because most major modes don't create their keymaps until then. If you want to specify something in your @file{~/.emacs} file to change a major mode's bindings, you must use the mode's mode hook to delay the change until the mode is first used. For example, the command @code{texinfo-mode} to select Texinfo mode runs the hook @code{texinfo-mode-hook}. Here's how you can use the hook to add local bindings (not very useful, we admit) for @kbd{C-c n} and @kbd{C-c p} in Texinfo mode: @example (add-hook 'texinfo-mode-hook '(lambda () (define-key texinfo-mode-map "\C-cp" 'backward-paragraph) (define-key texinfo-mode-map "\C-cn" 'forward-paragraph))) @end example @xref{Hooks}. @node Minibuffer Maps @subsection Minibuffer Keymaps @cindex minibuffer keymaps @vindex minibuffer-local-map @vindex minibuffer-local-ns-map @vindex minibuffer-local-completion-map @vindex minibuffer-local-must-match-map @vindex minibuffer-local-filename-completion-map @vindex minibuffer-local-must-match-filename-map The minibuffer has its own set of local keymaps; they contain various completion and exit commands. @itemize @bullet @item @code{minibuffer-local-map} is used for ordinary input (no completion). @item @code{minibuffer-local-ns-map} is similar, except that @key{SPC} exits just like @key{RET}. This is used mainly for Mocklisp compatibility. @item @code{minibuffer-local-completion-map} is for permissive completion. @item @code{minibuffer-local-must-match-map} is for strict completion and for cautious completion. @item @code{minibuffer-local-filename-completion-map} and @code{minibuffer-local-must-match-filename-map} are like the two previous ones, but they are specifically for file name completion. They do not bind @key{SPC}. @end itemize @node Rebinding @subsection Changing Key Bindings Interactively @cindex key rebinding, this session @cindex redefining keys, this session The way to redefine an Emacs key is to change its entry in a keymap. You can change the global keymap, in which case the change is effective in all major modes (except those that have their own overriding local definitions for the same key). Or you can change the current buffer's local map, which affects all buffers using the same major mode. @findex global-set-key @findex local-set-key @findex global-unset-key @findex local-unset-key @table @kbd @item M-x global-set-key @key{RET} @var{key} @var{cmd} @key{RET} Define @var{key} globally to run @var{cmd}. @item M-x local-set-key @key{RET} @var{key} @var{cmd} @key{RET} Define @var{key} locally (in the major mode now in effect) to run @var{cmd}. @item M-x global-unset-key @key{RET} @var{key} Make @var{key} undefined in the global map. @item M-x local-unset-key @key{RET} @var{key} Make @var{key} undefined locally (in the major mode now in effect). @end table For example, suppose you like to execute commands in a subshell within an Emacs buffer, instead of suspending Emacs and executing commands in your login shell. Normally, @kbd{C-z} is bound to the function @code{suspend-emacs} (when not using the X Window System), but you can change @kbd{C-z} to invoke an interactive subshell within Emacs, by binding it to @code{shell} as follows: @example M-x global-set-key @key{RET} C-z shell @key{RET} @end example @noindent @code{global-set-key} reads the command name after the key. After you press the key, a message like this appears so that you can confirm that you are binding the key you want: @example Set key C-z to command: @end example You can redefine function keys and mouse events in the same way; just type the function key or click the mouse when it's time to specify the key to rebind. You can rebind a key that contains more than one event in the same way. Emacs keeps reading the key to rebind until it is a complete key (that is, not a prefix key). Thus, if you type @kbd{C-f} for @var{key}, that's the end; the minibuffer is entered immediately to read @var{cmd}. But if you type @kbd{C-x}, another character is read; if that is @kbd{4}, another character is read, and so on. For example, @example M-x global-set-key @key{RET} C-x 4 $ spell-other-window @key{RET} @end example @noindent redefines @kbd{C-x 4 $} to run the (fictitious) command @code{spell-other-window}. The two-character keys consisting of @kbd{C-c} followed by a letter are reserved for user customizations. Lisp programs are not supposed to define these keys, so the bindings you make for them will be available in all major modes and will never get in the way of anything. You can remove the global definition of a key with @code{global-unset-key}. This makes the key @dfn{undefined}; if you type it, Emacs will just beep. Similarly, @code{local-unset-key} makes a key undefined in the current major mode keymap, which makes the global definition (or lack of one) come back into effect in that major mode. If you have redefined (or undefined) a key and you subsequently wish to retract the change, undefining the key will not do the job---you need to redefine the key with its standard definition. To find the name of the standard definition of a key, go to a Fundamental mode buffer and use @kbd{C-h c}. The documentation of keys in this manual also lists their command names. If you want to prevent yourself from invoking a command by mistake, it is better to disable the command than to undefine the key. A disabled command is less work to invoke when you really want to. @xref{Disabling}. @node Init Rebinding @subsection Rebinding Keys in Your Init File If you have a set of key bindings that you like to use all the time, you can specify them in your @file{.emacs} file by using their Lisp syntax. (@xref{Init File}.) The simplest method for doing this works for @acronym{ASCII} characters and Meta-modified @acronym{ASCII} characters only. This method uses a string to represent the key sequence you want to rebind. For example, here's how to bind @kbd{C-z} to @code{shell}: @example (global-set-key "\C-z" 'shell) @end example @noindent This example uses a string constant containing one character, @kbd{C-z}. (@samp{\C-} is string syntax for a control character.) The single-quote before the command name, @code{shell}, marks it as a constant symbol rather than a variable. If you omit the quote, Emacs would try to evaluate @code{shell} immediately as a variable. This probably causes an error; it certainly isn't what you want. Here is another example that binds the key sequence @kbd{C-x M-l}: @example (global-set-key "\C-x\M-l" 'make-symbolic-link) @end example To put @key{TAB}, @key{RET}, @key{ESC}, or @key{DEL} in the string, you can use the Emacs Lisp escape sequences, @samp{\t}, @samp{\r}, @samp{\e}, and @samp{\d}. Here is an example which binds @kbd{C-x @key{TAB}}: @example (global-set-key "\C-x\t" 'indent-rigidly) @end example These examples show how to write some other special @acronym{ASCII} characters in strings for key bindings: @example (global-set-key "\r" 'newline) ;; @key{RET} (global-set-key "\d" 'delete-backward-char) ;; @key{DEL} (global-set-key "\C-x\e\e" 'repeat-complex-command) ;; @key{ESC} @end example When the key sequence includes function keys or mouse button events, or non-@acronym{ASCII} characters such as @code{C-=} or @code{H-a}, you must use the more general method of rebinding, which uses a vector to specify the key sequence. The way to write a vector in Emacs Lisp is with square brackets around the vector elements. Use spaces to separate the elements. If an element is a symbol, simply write the symbol's name---no other delimiters or punctuation are needed. If a vector element is a character, write it as a Lisp character constant: @samp{?} followed by the character as it would appear in a string. Here are examples of using vectors to rebind @kbd{C-=} (a control character not in @acronym{ASCII}), @kbd{C-M-=} (not in @acronym{ASCII} because @kbd{C-=} is not), @kbd{H-a} (a Hyper character; @acronym{ASCII} doesn't have Hyper at all), @key{F7} (a function key), and @kbd{C-Mouse-1} (a keyboard-modified mouse button): @example (global-set-key [?\C-=] 'make-symbolic-link) (global-set-key [?\M-\C-=] 'make-symbolic-link) (global-set-key [?\H-a] 'make-symbolic-link) (global-set-key [f7] 'make-symbolic-link) (global-set-key [C-mouse-1] 'make-symbolic-link) @end example You can use a vector for the simple cases too. Here's how to rewrite the first six examples above to use vectors: @example (global-set-key [?\C-z] 'shell) (global-set-key [?\C-x ?l] 'make-symbolic-link) (global-set-key [?\C-x ?\t] 'indent-rigidly) (global-set-key [?\r] 'newline) (global-set-key [?\d] 'delete-backward-char) (global-set-key [?\C-x ?\e ?\e] 'repeat-complex-command) @end example @noindent As you see, you represent a multi-character key sequence with a vector by listing all of the characters in order within the square brackets that delimit the vector. Language and coding systems can cause problems with key bindings for non-@acronym{ASCII} characters. @xref{Non-ASCII Rebinding}. @node Function Keys @subsection Rebinding Function Keys Key sequences can contain function keys as well as ordinary characters. Just as Lisp characters (actually integers) represent keyboard characters, Lisp symbols represent function keys. If the function key has a word as its label, then that word is also the name of the corresponding Lisp symbol. Here are the conventional Lisp names for common function keys: @table @asis @item @code{left}, @code{up}, @code{right}, @code{down} Cursor arrow keys. @item @code{begin}, @code{end}, @code{home}, @code{next}, @code{prior} Other cursor repositioning keys. @item @code{select}, @code{print}, @code{execute}, @code{backtab} @itemx @code{insert}, @code{undo}, @code{redo}, @code{clearline} @itemx @code{insertline}, @code{deleteline}, @code{insertchar}, @code{deletechar} Miscellaneous function keys. @item @code{f1}, @code{f2}, @dots{} @code{f35} Numbered function keys (across the top of the keyboard). @item @code{kp-add}, @code{kp-subtract}, @code{kp-multiply}, @code{kp-divide} @itemx @code{kp-backtab}, @code{kp-space}, @code{kp-tab}, @code{kp-enter} @itemx @code{kp-separator}, @code{kp-decimal}, @code{kp-equal} Keypad keys (to the right of the regular keyboard), with names or punctuation. @item @code{kp-0}, @code{kp-1}, @dots{} @code{kp-9} Keypad keys with digits. @item @code{kp-f1}, @code{kp-f2}, @code{kp-f3}, @code{kp-f4} Keypad PF keys. @end table These names are conventional, but some systems (especially when using X) may use different names. To make certain what symbol is used for a given function key on your terminal, type @kbd{C-h c} followed by that key. A key sequence which contains function key symbols (or anything but @acronym{ASCII} characters) must be a vector rather than a string. Thus, to bind function key @samp{f1} to the command @code{rmail}, write the following: @example (global-set-key [f1] 'rmail) @end example @noindent To bind the right-arrow key to the command @code{forward-char}, you can use this expression: @example (global-set-key [right] 'forward-char) @end example @noindent This uses the Lisp syntax for a vector containing the symbol @code{right}. (This binding is present in Emacs by default.) @xref{Init Rebinding}, for more information about using vectors for rebinding. You can mix function keys and characters in a key sequence. This example binds @kbd{C-x @key{NEXT}} to the command @code{forward-page}. @example (global-set-key [?\C-x next] 'forward-page) @end example @noindent where @code{?\C-x} is the Lisp character constant for the character @kbd{C-x}. The vector element @code{next} is a symbol and therefore does not take a question mark. You can use the modifier keys @key{CTRL}, @key{META}, @key{HYPER}, @key{SUPER}, @key{ALT} and @key{SHIFT} with function keys. To represent these modifiers, add the strings @samp{C-}, @samp{M-}, @samp{H-}, @samp{s-}, @samp{A-} and @samp{S-} at the front of the symbol name. Thus, here is how to make @kbd{Hyper-Meta-@key{RIGHT}} move forward a word: @example (global-set-key [H-M-right] 'forward-word) @end example @cindex keypad Many keyboards have a ``numeric keypad'' on the right hand side. The numeric keys in the keypad double up as cursor motion keys, toggled by a key labeled @samp{Num Lock}. By default, Emacs translates these keys to the corresponding keys in the main keyboard. For example, when @samp{Num Lock} is on, the key labeled @samp{8} on the numeric keypad produces @code{kp-8}, which is translated to @kbd{8}; when @samp{Num Lock} is off, the same key produces @code{kp-up}, which is translated to @key{UP}. If you rebind a key such as @kbd{8} or @key{UP}, it affects the equivalent keypad key too. However, if you rebind a @samp{kp-} key directly, that won't affect its non-keypad equivalent. Emacs provides a convenient method for binding the numeric keypad keys, using the variables @code{keypad-setup}, @code{keypad-numlock-setup}, @code{keypad-shifted-setup}, and @code{keypad-numlock-shifted-setup}. These can be found in the @samp{keyboard} customization group (@pxref{Easy Customization}). You can rebind the keys to perform other tasks, such as issuing numeric prefix arguments. @node Named ASCII Chars @subsection Named @acronym{ASCII} Control Characters @key{TAB}, @key{RET}, @key{BS}, @key{LFD}, @key{ESC} and @key{DEL} started out as names for certain @acronym{ASCII} control characters, used so often that they have special keys of their own. For instance, @key{TAB} was another name for @kbd{C-i}. Later, users found it convenient to distinguish in Emacs between these keys and the ``same'' control characters typed with the @key{CTRL} key. Therefore, on most modern terminals, they are no longer the same, and @key{TAB} is distinguishable from @kbd{C-i}. Emacs can distinguish these two kinds of input if the keyboard does. It treats the ``special'' keys as function keys named @code{tab}, @code{return}, @code{backspace}, @code{linefeed}, @code{escape}, and @code{delete}. These function keys translate automatically into the corresponding @acronym{ASCII} characters @emph{if} they have no bindings of their own. As a result, neither users nor Lisp programs need to pay attention to the distinction unless they care to. If you do not want to distinguish between (for example) @key{TAB} and @kbd{C-i}, make just one binding, for the @acronym{ASCII} character @key{TAB} (octal code 011). If you do want to distinguish, make one binding for this @acronym{ASCII} character, and another for the ``function key'' @code{tab}. With an ordinary @acronym{ASCII} terminal, there is no way to distinguish between @key{TAB} and @kbd{C-i} (and likewise for other such pairs), because the terminal sends the same character in both cases. @node Non-ASCII Rebinding @subsection Non-@acronym{ASCII} Characters on the Keyboard @cindex rebinding non-@acronym{ASCII} keys @cindex non-@acronym{ASCII} keys, binding If your keyboard has keys that send non-@acronym{ASCII} characters, such as accented letters, rebinding these keys must be done by using a vector like this@footnote{Note that you should avoid the string syntax for binding non-@acronym{ASCII} characters, since they will be interpreted as meta keys. @xref{Strings of Events,,,elisp, The Emacs Lisp Reference Manual}.}: @example (global-set-key [?@var{char}] 'some-function) @end example @noindent Type @kbd{C-q} followed by the key you want to bind, to insert @var{char}. Since this puts a non-@acronym{ASCII} character in the @file{.emacs}, you should specify a coding system for that file that supports the character in question. @xref{Init Syntax}. @strong{Warning:} if you change the keyboard encoding, or change between multibyte and unibyte mode, or anything that would alter which code @kbd{C-q} would insert for that character, you'll need to edit the Lisp expression accordingly, to use the character code generated by @kbd{C-q} in the new mode. @node Mouse Buttons @subsection Rebinding Mouse Buttons @cindex mouse button events @cindex rebinding mouse buttons @cindex click events @cindex drag events @cindex down events @cindex button down events Emacs uses Lisp symbols to designate mouse buttons, too. The ordinary mouse events in Emacs are @dfn{click} events; these happen when you press a button and release it without moving the mouse. You can also get @dfn{drag} events, when you move the mouse while holding the button down. Drag events happen when you finally let go of the button. The symbols for basic click events are @code{mouse-1} for the leftmost button, @code{mouse-2} for the next, and so on. Here is how you can redefine the second mouse button to split the current window: @example (global-set-key [mouse-2] 'split-window-vertically) @end example The symbols for drag events are similar, but have the prefix @samp{drag-} before the word @samp{mouse}. For example, dragging the first button generates a @code{drag-mouse-1} event. You can also define bindings for events that occur when a mouse button is pressed down. These events start with @samp{down-} instead of @samp{drag-}. Such events are generated only if they have key bindings. When you get a button-down event, a corresponding click or drag event will always follow. @cindex double clicks @cindex triple clicks If you wish, you can distinguish single, double, and triple clicks. A double click means clicking a mouse button twice in approximately the same place. The first click generates an ordinary click event. The second click, if it comes soon enough, generates a double-click event instead. The event type for a double-click event starts with @samp{double-}: for example, @code{double-mouse-3}. This means that you can give a special meaning to the second click at the same place, but it must act on the assumption that the ordinary single click definition has run when the first click was received. This constrains what you can do with double clicks, but user interface designers say that this constraint ought to be followed in any case. A double click should do something similar to the single click, only ``more so.'' The command for the double-click event should perform the extra work for the double click. If a double-click event has no binding, it changes to the corresponding single-click event. Thus, if you don't define a particular double click specially, it executes the single-click command twice. Emacs also supports triple-click events whose names start with @samp{triple-}. Emacs does not distinguish quadruple clicks as event types; clicks beyond the third generate additional triple-click events. However, the full number of clicks is recorded in the event list, so if you know Emacs Lisp you can distinguish if you really want to (@pxref{Accessing Events,,, elisp, The Emacs Lisp Reference Manual}). We don't recommend distinct meanings for more than three clicks, but sometimes it is useful for subsequent clicks to cycle through the same set of three meanings, so that four clicks are equivalent to one click, five are equivalent to two, and six are equivalent to three. Emacs also records multiple presses in drag and button-down events. For example, when you press a button twice, then move the mouse while holding the button, Emacs gets a @samp{double-drag-} event. And at the moment when you press it down for the second time, Emacs gets a @samp{double-down-} event (which is ignored, like all button-down events, if it has no binding). @vindex double-click-time The variable @code{double-click-time} specifies how much time can elapse between clicks and still allow them to be grouped as a multiple click. Its value is in units of milliseconds. If the value is @code{nil}, double clicks are not detected at all. If the value is @code{t}, then there is no time limit. The default is 500. @vindex double-click-fuzz The variable @code{double-click-fuzz} specifies how much the mouse can move between clicks and still allow them to be grouped as a multiple click. Its value is in units of pixels on windowed displays and in units of 1/8 of a character cell on text-mode terminals; the default is 3. The symbols for mouse events also indicate the status of the modifier keys, with the usual prefixes @samp{C-}, @samp{M-}, @samp{H-}, @samp{s-}, @samp{A-} and @samp{S-}. These always precede @samp{double-} or @samp{triple-}, which always precede @samp{drag-} or @samp{down-}. A frame includes areas that don't show text from the buffer, such as the mode line and the scroll bar. You can tell whether a mouse button comes from a special area of the screen by means of dummy ``prefix keys.'' For example, if you click the mouse in the mode line, you get the prefix key @code{mode-line} before the ordinary mouse-button symbol. Thus, here is how to define the command for clicking the first button in a mode line to run @code{scroll-up}: @example (global-set-key [mode-line mouse-1] 'scroll-up) @end example Here is the complete list of these dummy prefix keys and their meanings: @table @code @item mode-line The mouse was in the mode line of a window. @item vertical-line The mouse was in the vertical line separating side-by-side windows. (If you use scroll bars, they appear in place of these vertical lines.) @item vertical-scroll-bar The mouse was in a vertical scroll bar. (This is the only kind of scroll bar Emacs currently supports.) @item menu-bar The mouse was in the menu bar. @item header-line The mouse was in a header line. @ignore @item horizontal-scroll-bar The mouse was in a horizontal scroll bar. Horizontal scroll bars do horizontal scrolling, and people don't use them often. @end ignore @end table You can put more than one mouse button in a key sequence, but it isn't usual to do so. @node Disabling @subsection Disabling Commands @cindex disabled command Disabling a command marks the command as requiring confirmation before it can be executed. The purpose of disabling a command is to prevent beginning users from executing it by accident and being confused. An attempt to invoke a disabled command interactively in Emacs displays a window containing the command's name, its documentation, and some instructions on what to do immediately; then Emacs asks for input saying whether to execute the command as requested, enable it and execute it, or cancel. If you decide to enable the command, you are asked whether to do this permanently or just for the current session. (Enabling permanently works by automatically editing your @file{.emacs} file.) You can also type @kbd{!} to enable @emph{all} commands, for the current session only. The direct mechanism for disabling a command is to put a non-@code{nil} @code{disabled} property on the Lisp symbol for the command. Here is the Lisp program to do this: @example (put 'delete-region 'disabled t) @end example If the value of the @code{disabled} property is a string, that string is included in the message displayed when the command is used: @example (put 'delete-region 'disabled "It's better to use `kill-region' instead.\n") @end example @findex disable-command @findex enable-command You can make a command disabled either by editing the @file{.emacs} file directly or with the command @kbd{M-x disable-command}, which edits the @file{.emacs} file for you. Likewise, @kbd{M-x enable-command} edits @file{.emacs} to enable a command permanently. @xref{Init File}. If Emacs was invoked with the @option{-q} or @option{--no-init-file} options (@pxref{Initial Options}), it will not edit your @file{~/.emacs} init file. This is because editing the init file from such a session might overwrite the lines you might have on your init file which enable and disable commands. Whether a command is disabled is independent of what key is used to invoke it; disabling also applies if the command is invoked using @kbd{M-x}. Disabling a command has no effect on calling it as a function from Lisp programs. @node Syntax @section The Syntax Table @cindex syntax table All the Emacs commands which parse words or balance parentheses are controlled by the @dfn{syntax table}. The syntax table says which characters are opening delimiters, which are parts of words, which are string quotes, and so on. It does this by assigning each character to one of fifteen-odd @dfn{syntax classes}. In some cases it specifies some additional information also. Each major mode has its own syntax table (though related major modes sometimes share one syntax table) which it installs in each buffer that uses the mode. The syntax table installed in the current buffer is the one that all commands use, so we call it ``the'' syntax table. @kindex C-h s @findex describe-syntax To display a description of the contents of the current syntax table, type @kbd{C-h s} (@code{describe-syntax}). The description of each character includes both the string you would have to give to @code{modify-syntax-entry} to set up that character's current syntax, starting with the character which designates its syntax class, plus some English text to explain its meaning. A syntax table is actually a Lisp object, a char-table, whose elements are cons cells. For full information on the syntax table, see @ref{Syntax Tables,, Syntax Tables, elisp, The Emacs Lisp Reference Manual}. @node Init File @section The Init File, @file{~/.emacs} @cindex init file @cindex Emacs initialization file @cindex key rebinding, permanent @cindex rebinding keys, permanently @cindex startup (init file) When Emacs is started, it normally loads a Lisp program from the file @file{.emacs} or @file{.emacs.el} in your home directory (see @ref{General Variables, HOME}, if you don't know where that is). We call this file your @dfn{init file} because it specifies how to initialize Emacs for you. You can use the command line switch @samp{-q} to prevent loading your init file, and @samp{-u} (or @samp{--user}) to specify a different user's init file (@pxref{Initial Options}). You can also use @file{~/.emacs.d/init.el} as the init file. Emacs tries this if it cannot find @file{~/.emacs} or @file{~/.emacs.el}. @cindex @file{default.el}, the default init file There can also be a @dfn{default init file}, which is the library named @file{default.el}, found via the standard search path for libraries. The Emacs distribution contains no such library; your site may create one for local customizations. If this library exists, it is loaded whenever you start Emacs (except when you specify @samp{-q}). But your init file, if any, is loaded first; if it sets @code{inhibit-default-init} non-@code{nil}, then @file{default} is not loaded. @cindex site init file @cindex @file{site-start.el}, the site startup file Your site may also have a @dfn{site startup file}; this is named @file{site-start.el}, if it exists. Like @file{default.el}, Emacs finds this file via the standard search path for Lisp libraries. Emacs loads this library before it loads your init file. To inhibit loading of this library, use the option @samp{--no-site-file}. @xref{Initial Options}. We recommend against using @file{site-start.el} for changes that some users may not like. It is better to put them in @file{default.el}, so that users can more easily override them. You can place @file{default.el} and @file{site-start.el} in any of the directories which Emacs searches for Lisp libraries. The variable @code{load-path} (@pxref{Lisp Libraries}) specifies these directories. Many sites put these files in the @file{site-lisp} subdirectory of the Emacs installation directory, typically @file{/usr/local/share/emacs/site-lisp}. If you have a large amount of code in your @file{.emacs} file, you should rename it to @file{~/.emacs.el}, and byte-compile it. @xref{Byte Compilation,, Byte Compilation, elisp, the Emacs Lisp Reference Manual}, for more information about compiling Emacs Lisp programs. If you are going to write actual Emacs Lisp programs that go beyond minor customization, you should read the @cite{Emacs Lisp Reference Manual}. @ifinfo @xref{Top, Emacs Lisp, Emacs Lisp, elisp, the Emacs Lisp Reference Manual}. @end ifinfo @menu * Init Syntax:: Syntax of constants in Emacs Lisp. * Init Examples:: How to do some things with an init file. * Terminal Init:: Each terminal type can have an init file. * Find Init:: How Emacs finds the init file. @end menu @node Init Syntax @subsection Init File Syntax The @file{.emacs} file contains one or more Lisp function call expressions. Each of these consists of a function name followed by arguments, all surrounded by parentheses. For example, @code{(setq fill-column 60)} calls the function @code{setq} to set the variable @code{fill-column} (@pxref{Filling}) to 60. You can set any Lisp variable with @code{setq}, but with certain variables @code{setq} won't do what you probably want in the @file{.emacs} file. Some variables automatically become buffer-local when set with @code{setq}; what you want in @file{.emacs} is to set the default value, using @code{setq-default}. Some customizable minor mode variables do special things to enable the mode when you set them with Customize, but ordinary @code{setq} won't do that; to enable the mode in your @file{.emacs} file, call the minor mode command. The following section has examples of both of these methods. The second argument to @code{setq} is an expression for the new value of the variable. This can be a constant, a variable, or a function call expression. In @file{.emacs}, constants are used most of the time. They can be: @table @asis @item Numbers: Numbers are written in decimal, with an optional initial minus sign. @item Strings: @cindex Lisp string syntax @cindex string syntax Lisp string syntax is the same as C string syntax with a few extra features. Use a double-quote character to begin and end a string constant. In a string, you can include newlines and special characters literally. But often it is cleaner to use backslash sequences for them: @samp{\n} for newline, @samp{\b} for backspace, @samp{\r} for carriage return, @samp{\t} for tab, @samp{\f} for formfeed (control-L), @samp{\e} for escape, @samp{\\} for a backslash, @samp{\"} for a double-quote, or @samp{\@var{ooo}} for the character whose octal code is @var{ooo}. Backslash and double-quote are the only characters for which backslash sequences are mandatory. @samp{\C-} can be used as a prefix for a control character, as in @samp{\C-s} for @acronym{ASCII} control-S, and @samp{\M-} can be used as a prefix for a Meta character, as in @samp{\M-a} for @kbd{Meta-A} or @samp{\M-\C-a} for @kbd{Control-Meta-A}.@refill @cindex international characters in @file{.emacs} @cindex non-@acronym{ASCII} characters in @file{.emacs} If you want to include non-@acronym{ASCII} characters in strings in your init file, you should consider putting a @w{@samp{-*-coding: @var{coding-system}-*-}} tag on the first line which states the coding system used to save your @file{.emacs}, as explained in @ref{Recognize Coding}. This is because the defaults for decoding non-@acronym{ASCII} text might not yet be set up by the time Emacs reads those parts of your init file which use such strings, possibly leading Emacs to decode those strings incorrectly. @item Characters: Lisp character constant syntax consists of a @samp{?} followed by either a character or an escape sequence starting with @samp{\}. Examples: @code{?x}, @code{?\n}, @code{?\"}, @code{?\)}. Note that strings and characters are not interchangeable in Lisp; some contexts require one and some contexts require the other. @xref{Non-ASCII Rebinding}, for information about binding commands to keys which send non-@acronym{ASCII} characters. @item True: @code{t} stands for `true'. @item False: @code{nil} stands for `false'. @item Other Lisp objects: Write a single-quote (@code{'}) followed by the Lisp object you want. @end table @node Init Examples @subsection Init File Examples Here are some examples of doing certain commonly desired things with Lisp expressions: @itemize @bullet @item Make @key{TAB} in C mode just insert a tab if point is in the middle of a line. @example (setq c-tab-always-indent nil) @end example Here we have a variable whose value is normally @code{t} for `true' and the alternative is @code{nil} for `false'. @item Make searches case sensitive by default (in all buffers that do not override this). @example (setq-default case-fold-search nil) @end example This sets the default value, which is effective in all buffers that do not have local values for the variable. Setting @code{case-fold-search} with @code{setq} affects only the current buffer's local value, which is not what you probably want to do in an init file. @item @vindex user-mail-address Specify your own email address, if Emacs can't figure it out correctly. @example (setq user-mail-address "coon@@yoyodyne.com") @end example Various Emacs packages that need your own email address use the value of @code{user-mail-address}. @item Make Text mode the default mode for new buffers. @example (setq default-major-mode 'text-mode) @end example Note that @code{text-mode} is used because it is the command for entering Text mode. The single-quote before it makes the symbol a constant; otherwise, @code{text-mode} would be treated as a variable name. @need 1500 @item Set up defaults for the Latin-1 character set which supports most of the languages of Western Europe. @example (set-language-environment "Latin-1") @end example @need 1500 @item Turn off Line Number mode, a global minor mode. @example (line-number-mode 0) @end example @need 1500 @item Turn on Auto Fill mode automatically in Text mode and related modes. @example (add-hook 'text-mode-hook '(lambda () (auto-fill-mode 1))) @end example This shows how to add a hook function to a normal hook variable (@pxref{Hooks}). The function we supply is a list starting with @code{lambda}, with a single-quote in front of it to make it a list constant rather than an expression. It's beyond the scope of this manual to explain Lisp functions, but for this example it is enough to know that the effect is to execute @code{(auto-fill-mode 1)} when Text mode is entered. You can replace that with any other expression that you like, or with several expressions in a row. Emacs comes with a function named @code{turn-on-auto-fill} whose definition is @code{(lambda () (auto-fill-mode 1))}. Thus, a simpler way to write the above example is as follows: @example (add-hook 'text-mode-hook 'turn-on-auto-fill) @end example @item Load the installed Lisp library named @file{foo} (actually a file @file{foo.elc} or @file{foo.el} in a standard Emacs directory). @example (load "foo") @end example When the argument to @code{load} is a relative file name, not starting with @samp{/} or @samp{~}, @code{load} searches the directories in @code{load-path} (@pxref{Lisp Libraries}). @item Load the compiled Lisp file @file{foo.elc} from your home directory. @example (load "~/foo.elc") @end example Here an absolute file name is used, so no searching is done. @item @cindex loading Lisp libraries automatically @cindex autoload Lisp libraries Tell Emacs to find the definition for the function @code{myfunction} by loading a Lisp library named @file{mypackage} (i.e.@: a file @file{mypackage.elc} or @file{mypackage.el}): @example (autoload 'myfunction "mypackage" "Do what I say." t) @end example @noindent Here the string @code{"Do what I say."} is the function's documentation string. You specify it in the @code{autoload} definition so it will be available for help commands even when the package is not loaded. The last argument, @code{t}, indicates that this function is interactive; that is, it can be invoked interactively by typing @kbd{M-x myfunction @key{RET}} or by binding it to a key. If the function is not interactive, omit the @code{t} or use @code{nil}. @item Rebind the key @kbd{C-x l} to run the function @code{make-symbolic-link} (@pxref{Init Rebinding}). @example (global-set-key "\C-xl" 'make-symbolic-link) @end example or @example (define-key global-map "\C-xl" 'make-symbolic-link) @end example Note once again the single-quote used to refer to the symbol @code{make-symbolic-link} instead of its value as a variable. @item Do the same thing for Lisp mode only. @example (define-key lisp-mode-map "\C-xl" 'make-symbolic-link) @end example @item Redefine all keys which now run @code{next-line} in Fundamental mode so that they run @code{forward-line} instead. @findex substitute-key-definition @example (substitute-key-definition 'next-line 'forward-line global-map) @end example @item Make @kbd{C-x C-v} undefined. @example (global-unset-key "\C-x\C-v") @end example One reason to undefine a key is so that you can make it a prefix. Simply defining @kbd{C-x C-v @var{anything}} will make @kbd{C-x C-v} a prefix, but @kbd{C-x C-v} must first be freed of its usual non-prefix definition. @item Make @samp{$} have the syntax of punctuation in Text mode. Note the use of a character constant for @samp{$}. @example (modify-syntax-entry ?\$ "." text-mode-syntax-table) @end example @item Enable the use of the command @code{narrow-to-region} without confirmation. @example (put 'narrow-to-region 'disabled nil) @end example @item Adjusting the configuration to various platforms and Emacs versions. Users typically want Emacs to behave the same on all systems, so the same init file is right for all platforms. However, sometimes it happens that a function you use for customizing Emacs is not available on some platforms or in older Emacs versions. To deal with that situation, put the customization inside a conditional that tests whether the function or facility is available, like this: @example (if (fboundp 'blink-cursor-mode) (blink-cursor-mode 0)) (if (boundp 'coding-category-utf-8) (set-coding-priority '(coding-category-utf-8))) @end example @noindent You can also simply disregard the errors that occur if the function is not defined. @example (condition case () (set-face-background 'region "grey75") (error nil)) @end example A @code{setq} on a variable which does not exist is generally harmless, so those do not need a conditional. @end itemize @node Terminal Init @subsection Terminal-specific Initialization Each terminal type can have a Lisp library to be loaded into Emacs when it is run on that type of terminal. For a terminal type named @var{termtype}, the library is called @file{term/@var{termtype}} and it is found by searching the directories @code{load-path} as usual and trying the suffixes @samp{.elc} and @samp{.el}. Normally it appears in the subdirectory @file{term} of the directory where most Emacs libraries are kept.@refill The usual purpose of the terminal-specific library is to map the escape sequences used by the terminal's function keys onto more meaningful names, using @code{function-key-map}. See the file @file{term/lk201.el} for an example of how this is done. Many function keys are mapped automatically according to the information in the Termcap data base; the terminal-specific library needs to map only the function keys that Termcap does not specify. When the terminal type contains a hyphen, only the part of the name before the first hyphen is significant in choosing the library name. Thus, terminal types @samp{aaa-48} and @samp{aaa-30-rv} both use the library @file{term/aaa}. The code in the library can use @code{(getenv "TERM")} to find the full terminal type name.@refill @vindex term-file-prefix The library's name is constructed by concatenating the value of the variable @code{term-file-prefix} and the terminal type. Your @file{.emacs} file can prevent the loading of the terminal-specific library by setting @code{term-file-prefix} to @code{nil}. @vindex term-setup-hook Emacs runs the hook @code{term-setup-hook} at the end of initialization, after both your @file{.emacs} file and any terminal-specific library have been read in. Add hook functions to this hook if you wish to override part of any of the terminal-specific libraries and to define initializations for terminals that do not have a library. @xref{Hooks}. @node Find Init @subsection How Emacs Finds Your Init File Normally Emacs uses the environment variable @env{HOME} (@pxref{General Variables, HOME}) to find @file{.emacs}; that's what @samp{~} means in a file name. If @file{.emacs} is not found inside @file{~/} (nor @file{.emacs.el}), Emacs looks for @file{~/.emacs.d/init.el} (which, like @file{~/.emacs.el}, can be byte-compiled). However, if you run Emacs from a shell started by @code{su}, Emacs tries to find your own @file{.emacs}, not that of the user you are currently pretending to be. The idea is that you should get your own editor customizations even if you are running as the super user. More precisely, Emacs first determines which user's init file to use. It gets your user name from the environment variables @env{LOGNAME} and @env{USER}; if neither of those exists, it uses effective user-ID. If that user name matches the real user-ID, then Emacs uses @env{HOME}; otherwise, it looks up the home directory corresponding to that user name in the system's data base of users. @c LocalWords: backtab @ignore arch-tag: c68abddb-4410-4fb5-925f-63394e971d93 @end ignore