Mercurial > emacs
view lisp/makefile.w32-in @ 35123:767b546e1676
Update to version 4.0. Provide support
for detecting a keypress that generates an ASCII key sequence.
(Previously, only a keypress that generates a vector was
recognized.) Embed Window Manager name into name of the generated
EDT Emulation initialization file since the initialization file is
Window Manager specific. Add Commentary section to file header.
author | Gerd Moellmann <gerd@gnu.org> |
---|---|
date | Mon, 08 Jan 2001 13:18:18 +0000 |
parents | dc7adc956a5e |
children | 0689ddc1751c |
line wrap: on
line source
# Hacked up Nmake makefile for GNU Emacs # Geoff Voelker (voelker@cs.washington.edu) # Copyright (c) 1994 Free Software Foundation, Inc. # # This file is part of GNU Emacs. # # GNU Emacs is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Emacs; see the file COPYING. If not, write to the # Free Software Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # ALL = all: $(ALL) SQUOTE=' # ' lisp = $(CURDIR) # You can specify a different executable on the make command line, # e.g. "make EMACS=../src/emacs ...". EMACS = "../bin/emacs.exe" # Command line flags for Emacs. This must include --multibyte, # otherwise some files will not compile. EMACSOPT = -batch --no-init-file --no-site-file --multibyte lisptagsfiles1 = $(lisp)/*.el lisptagsfiles2 = $(lisp)/*/*.el ETAGS = "../lib-src/$(BLD)/etags" # Files which should not be compiled. # - emacs-lisp/cl-specs.el: only contains `def-edebug-spec's so there's # no point compiling it, although it doesn't hurt. DONTCOMPILE = \ $(lisp)/bindings.el \ $(lisp)/cus-load.el \ $(lisp)/cus-start.el \ $(lisp)/emacs-lisp/cl-specs.el \ $(lisp)/eshell/esh-maint.el \ $(lisp)/eshell/esh-groups.el \ $(lisp)/finder-inf.el \ $(lisp)/forms-d2.el \ $(lisp)/forms-pass.el \ $(lisp)/generic-x.el \ $(lisp)/international/latin-1.el \ $(lisp)/international/latin-2.el \ $(lisp)/international/latin-3.el \ $(lisp)/international/latin-4.el \ $(lisp)/international/latin-5.el \ $(lisp)/international/latin-8.el \ $(lisp)/international/latin-9.el \ $(lisp)/international/mule-conf.el \ $(lisp)/loaddefs.el \ $(lisp)/loadup.el \ $(lisp)/mail/blessmail.el \ $(lisp)/mail/sc.el \ $(lisp)/patcomp.el \ $(lisp)/paths.el \ $(lisp)/play/bruce.el \ $(lisp)/subdirs.el \ $(lisp)/term/internal.el \ $(lisp)/version.el # Files to compile before others during a bootstrap. This is done # to speed up the bootstrap process. COMPILE_FIRST = \ $(lisp)/emacs-lisp/byte-opt.el \ $(lisp)/emacs-lisp/bytecomp.el \ $(lisp)/subr.el # The actual Emacs command run in the targets below. emacs = $(EMACS) $(EMACSOPT) # Common command to find subdirectories setwins=subdirs=`find $$wd -type d -print`; \ for file in $$subdirs; do \ case $$file in */Old | */RCS | */CVS | */CVS/* | */=* ) ;; \ *) wins="$$wins $$file" ;; \ esac; \ done # Have to define the list of subdirs manually when not using sh. WINS=\ calendar \ emacs-lisp \ emulation \ eshell \ gnus \ international \ language \ mail \ net \ play \ progmodes \ term \ textmodes doit: cus-load.el: touch $@ custom-deps: cus-load.el doit @echo Directories: $(WINS) set EMACSLOADPATH=$(lisp) -$(SETLOADPATH) $(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hooks nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS) finder-inf.el: echo (provide $(SQUOTE)finder-inf)>> $@ finder-data: finder-inf.el doit @echo Directories: $(WINS) $(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS) loaddefs.el: echo ;;; loaddefs.el --- automatically extracted autoloads> $@ echo ;;; Code:>> $@ echo >> $@ echo ;;; Local Variables:>> $@ echo ;;; version-control: never>> $@ echo ;;; no-byte-compile: t>> $@ echo ;;; no-update-autoloads: t>> $@ echo ;;; End:>> $@ echo ;;; loaddefs.el ends here>> $@ autoloads: loaddefs.el doit @echo Directories: $(WINS) set EMACSLOADPATH=$(lisp) $(SETLOADPATH) $(emacs) -l autoload --eval $(ARGQUOTE)(setq find-file-hooks nil generated-autoload-file $(DQUOTE)$(lisp)/loaddefs.el$(DQUOTE))$(ARGQUOTE) -f batch-update-autoloads $(lisp) $(WINS) subdirs.el: $(MAKE) $(MFLAGS) update-subdirs # Need separate version for sh and native cmd.exe update-subdirs: update-subdirs-$(SHELLTYPE) update-subdirs-CMD: doit @set QWINS= @for %d in ($(WINS)) do if not (%d)==(term) set QWINS=%QWINS% "%d" echo ;; In load-path, after this directory should come> subdirs.el echo ;; certain of its subdirectories. Here we specify them.>> subdirs.el echo (normal-top-level-add-to-load-path $(SQUOTE)(%QWINS%))>> subdirs.el update-subdirs-SH: doit wd=$(lisp); $(setwins); \ for file in $$wins; do \ $(srcdir)/update-subdirs $$file; \ done; updates: update-subdirs autoloads finder-data custom-deps TAGS: $(lisptagsfiles1) $(lisptagsfiles2) $(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2) TAGS-LISP: $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2) $(ETAGS) -o TAGS-LISP $(lispsource)$(lisptagsfiles1) $(lispsource)$(lisptagsfiles2) .SUFFIXES: .elc .el .el.elc: set EMACSLOADPATH=$(lisp) -$(SETLOADPATH) $(emacs) -f batch-byte-compile $< $(DONTCOMPILE:.el=.elc): -$(DEL) $@ # Compile all Lisp files, except those from DONTCOMPILE. This # compiles files unconditionally. All .elc files are made writable # before compilation in case we checked out read-only (CVS option -r). # Files MUST be compiled one by one. If we compile several files in a # row we can't make sure that the compilation environment is clean. # We also set the load-path of the Emacs used for compilation to the # current directory and its subdirectories, to make sure require's and # load's in the files being compiled find the right files. # Need separate version for sh and native cmd.exe compile-files: subdirs.el compile-files-$(SHELLTYPE) doit compile-files-CMD: set EMACSLOADPATH=$(lisp) # -for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @attrib -r %g for %f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %f for %f in ($(lisp) $(WINS)) do for %g in (%f/*.el) do $(emacs) -f batch-byte-compile %f/%g compile-files-SH: # for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done for el in $(COMPILE_FIRST); do \ echo Compiling $$el; \ EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \ done for dir in $(lisp) $(WINS); do \ for el in $$dir/*.el; do \ echo Compiling $$el; \ EMACSLOADPATH=$(lisp) $(emacs) -f batch-byte-compile $$el; \ done; \ done # Backup compiled Lisp files in elc.tar.gz. If that file already # exists, make a backup of it. backup-compiled-files: -mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~ -tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc # Compile Lisp files, but save old compiled files first. compile: backup-compiled-files compile-files # Recompile all Lisp files which are newer than their .elc files. # Note that this doesn't create .elc files. It only recompiles if an # .elc is present. recompile: doit set EMACSLOADPATH=$(lisp) $(SETLOADPATH) $(emacs) -f batch-byte-recompile-directory . # Prepare a bootstrap in the lisp subdirectory. Build loaddefs.el, # because it's not sure it's up-to-date, and if it's not, that might # lead to errors during the bootstrap because something fails to # autoload as expected. Remove compiled Lisp files so that # bootstrap-emacs will be built from sources only. # Need separate version for sh and native cmd.exe bootstrap-clean: bootstrap-clean-$(SHELLTYPE) bootstrap-clean-CMD: if exist $(EMACS) $(MAKE) $(MFLAGS) autoloads -for %f in ($(lisp) $(WINS)) do for %g in (%f\*.elc) do @$(DEL) %g bootstrap-clean-SH: if test -f $(EMACS); then $(MAKE) $(MFLAGS) autoloads; fi -rm -f $(lisp)/*.elc $(lisp)/*/*.elc # Generate/update files for the bootstrap process. bootstrap: autoloads compile-files custom-deps # # Assuming INSTALL_DIR is defined, copy the elisp files to it # Windows 95 makes this harder than it should be. # install: - mkdir "$(INSTALL_DIR)/lisp" - $(DEL) ../same-dir.tst - $(DEL) "$(INSTALL_DIR)/same-dir.tst" echo SameDirTest > "$(INSTALL_DIR)/same-dir.tst" #ifdef COPY_LISP_SOURCE $(IFNOTSAMEDIR) $(CP_DIR) . "$(INSTALL_DIR)/lisp" $(ENDIF) #else # $(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF) #endif - $(DEL) ../same-dir.tst - $(DEL) "$(INSTALL_DIR)/same-dir.tst" # # Maintenance # clean: - $(DEL) *~