Mercurial > emacs
view man/texinfo.tex @ 69551:78c97c8a8483
Add prototype for x_display_ok.
author | Eli Zaretskii <eliz@gnu.org> |
---|---|
date | Sat, 18 Mar 2006 13:49:11 +0000 |
parents | dc2d5a6655a3 |
children | c393ff423703 c5406394f567 |
line wrap: on
line source
% texinfo.tex -- TeX macros to handle Texinfo files. % % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % \def\texinfoversion{2006-02-05.23} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, % 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, % 2005, 2006 Free Software Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or % modify it under the terms of the GNU General Public License as % published by the Free Software Foundation; either version 2, or (at % your option) any later version. % % This texinfo.tex file is distributed in the hope that it will be % useful, but WITHOUT ANY WARRANTY; without even the implied warranty % of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU % General Public License for more details. % % You should have received a copy of the GNU General Public License % along with this texinfo.tex file; see the file COPYING. If not, write % to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, % Boston, MA 02110-1301, USA. % % In other words, you are welcome to use, share and improve this program. % You are forbidden to forbid anyone else to use, share and improve % what you give them. Help stamp out software-hoarding! % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: % ftp://ftp.gnu.org/gnu/texinfo.tex % (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) % ftp://texinfo.org/texinfo/texinfo.tex % ftp://tug.org/tex/texinfo.tex % (and all CTAN mirrors, see http://www.ctan.org), % and /home/gd/gnu/doc/texinfo.tex on the GNU machines. % % The texinfo.tex in any given Texinfo distribution could well be out % of date, so if that's what you're using, please check. % % Texinfo has a small home page at http://texinfo.org/ and also % http://www.gnu.org/software/texinfo. % % Send bug reports to bug-texinfo@gnu.org. Please include including a % complete document in each bug report with which we can reproduce the % problem. Patches are, of course, greatly appreciated. % % To process a Texinfo manual with TeX, it's most reliable to use the % texi2dvi shell script that comes with the distribution. For a simple % manual foo.texi, however, you can get away with this: % tex foo.texi % texindex foo.?? % tex foo.texi % tex foo.texi % dvips foo.dvi -o # or whatever; this makes foo.ps. % The extra TeX runs get the cross-reference information correct. % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. % % It is possible to adapt texinfo.tex for other languages. You can get % the existing language-specific files from the full Texinfo distribution. \message{Loading texinfo [version \texinfoversion]:} % If in a .fmt file, print the version number % and turn on active characters that we couldn't do earlier because % they might have appeared in the input file name. \everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} % Save some parts of plain tex whose names we will redefine. \let\ptexb=\b \let\ptexbullet=\bullet \let\ptexc=\c \let\ptexcomma=\, \let\ptexdot=\. \let\ptexdots=\dots \let\ptexend=\end \let\ptexequiv=\equiv \let\ptexexclam=\! \let\ptexi=\i \let\ptexlbrace=\{ \let\ptexrbrace=\} \let\ptexstar=\* \let\ptext=\t % We never want plain's outer \+ definition in Texinfo. % For @tex, we can use \tabalign. \let\+ = \relax \message{Basics,} \chardef\other=12 % If this character appears in an error message or help string, it % starts a new line in the output. \newlinechar = `^^J % Set up fixed words for English if not already set. \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi \ifx\putwordin\undefined \gdef\putwordin{in}\fi \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi \ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi \ifx\putwordof\undefined \gdef\putwordof{of}\fi \ifx\putwordon\undefined \gdef\putwordon{on}\fi \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi \ifx\putwordsection\undefined \gdef\putwordsection{section}\fi \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi \ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi \ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi % \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi \ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi \ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi \ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi \ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi \ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi \ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi \ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi \ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi % \ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi \ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi \ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi \ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi \ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi % Ignore a token. % \def\gobble#1{} \hyphenation{ap-pen-dix} \hyphenation{mini-buf-fer mini-buf-fers} \hyphenation{eshell} \hyphenation{white-space} % Margin to add to right of even pages, to left of odd pages. \newdimen \bindingoffset \newdimen \normaloffset \newdimen\pagewidth \newdimen\pageheight % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, % since that produces some useless output on the terminal. % \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% \ifx\eTeXversion\undefined \def\loggingall{\tracingcommands2 \tracingstats2 \tracingpages1 \tracingoutput1 \tracinglostchars1 \tracingmacros2 \tracingparagraphs1 \tracingrestores1 \showboxbreadth\maxdimen\showboxdepth\maxdimen }% \else \def\loggingall{\tracingcommands3 \tracingstats2 \tracingpages1 \tracingoutput1 \tracinglostchars1 \tracingmacros2 \tracingparagraphs1 \tracingrestores1 \tracingscantokens1 \tracingassigns1 \tracingifs1 \tracinggroups1 \tracingnesting2 \showboxbreadth\maxdimen\showboxdepth\maxdimen }% \fi % add check for \lastpenalty to plain's definitions. If the last thing % we did was a \nobreak, we don't want to insert more space. % \def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount \removelastskip\penalty-50\smallskip\fi\fi} \def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount \removelastskip\penalty-100\medskip\fi\fi} \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount \removelastskip\penalty-200\bigskip\fi\fi} % For @cropmarks command. % Do @cropmarks to get crop marks. % \newif\ifcropmarks \let\cropmarks = \cropmarkstrue % % Dimensions to add cropmarks at corners. % Added by P. A. MacKay, 12 Nov. 1986 % \newdimen\outerhsize \newdimen\outervsize % set by the paper size routines \newdimen\cornerlong \cornerlong=1pc \newdimen\cornerthick \cornerthick=.3pt \newdimen\topandbottommargin \topandbottommargin=.75in % Main output routine. \chardef\PAGE = 255 \output = {\onepageout{\pagecontents\PAGE}} \newbox\headlinebox \newbox\footlinebox % \onepageout takes a vbox as an argument. Note that \pagecontents % does insertions, but you have to call it yourself. \def\onepageout#1{% \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi % \ifodd\pageno \advance\hoffset by \bindingoffset \else \advance\hoffset by -\bindingoffset\fi % % Do this outside of the \shipout so @code etc. will be expanded in % the headline as they should be, not taken literally (outputting ''code). \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% % {% % Have to do this stuff outside the \shipout because we want it to % take effect in \write's, yet the group defined by the \vbox ends % before the \shipout runs. % \escapechar = `\\ % use backslash in output files. \indexdummies % don't expand commands in the output. \normalturnoffactive % \ in index entries must not stay \, e.g., if % the page break happens to be in the middle of an example. \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi % \ifcropmarks \vbox to \outervsize\bgroup \hsize = \outerhsize \vskip-\topandbottommargin \vtop to0pt{% \line{\ewtop\hfil\ewtop}% \nointerlineskip \line{% \vbox{\moveleft\cornerthick\nstop}% \hfill \vbox{\moveright\cornerthick\nstop}% }% \vss}% \vskip\topandbottommargin \line\bgroup \hfil % center the page within the outer (page) hsize. \ifodd\pageno\hskip\bindingoffset\fi \vbox\bgroup \fi % \unvbox\headlinebox \pagebody{#1}% \ifdim\ht\footlinebox > 0pt % Only leave this space if the footline is nonempty. % (We lessened \vsize for it in \oddfootingxxx.) % The \baselineskip=24pt in plain's \makefootline has no effect. \vskip 2\baselineskip \unvbox\footlinebox \fi % \ifcropmarks \egroup % end of \vbox\bgroup \hfil\egroup % end of (centering) \line\bgroup \vskip\topandbottommargin plus1fill minus1fill \boxmaxdepth = \cornerthick \vbox to0pt{\vss \line{% \vbox{\moveleft\cornerthick\nsbot}% \hfill \vbox{\moveright\cornerthick\nsbot}% }% \nointerlineskip \line{\ewbot\hfil\ewbot}% }% \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox }% end of group with \turnoffactive \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } \newinsert\margin \dimen\margin=\maxdimen \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} {\catcode`\@ =11 \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi % marginal hacks, juha@viisa.uucp (Juha Takala) \ifvoid\margin\else % marginal info is present \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi \dimen@=\dp#1 \unvbox#1 \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi \ifr@ggedbottom \kern-\dimen@ \vfil \fi} } % Here are the rules for the cropmarks. Note that they are % offset so that the space between them is truly \outerhsize or \outervsize % (P. A. MacKay, 12 November, 1986) % \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} \def\nstop{\vbox {\hrule height\cornerthick depth\cornerlong width\cornerthick}} \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} \def\nsbot{\vbox {\hrule height\cornerlong depth\cornerthick width\cornerthick}} % Parse an argument, then pass it to #1. The argument is the rest of % the input line (except we remove a trailing comment). #1 should be a % macro which expects an ordinary undelimited TeX argument. % \def\parsearg#1{% \let\next = #1% \begingroup \obeylines \futurelet\temp\parseargx } % If the next token is an obeyed space (from an @example environment or % the like), remove it and recurse. Otherwise, we're done. \def\parseargx{% % \obeyedspace is defined far below, after the definition of \sepspaces. \ifx\obeyedspace\temp \expandafter\parseargdiscardspace \else \expandafter\parseargline \fi } % Remove a single space (as the delimiter token to the macro call). {\obeyspaces % \gdef\parseargdiscardspace {\futurelet\temp\parseargx}} {\obeylines % \gdef\parseargline#1^^M{% \endgroup % End of the group started in \parsearg. % % First remove any @c comment, then any @comment. % Result of each macro is put in \toks0. \argremovec #1\c\relax % \expandafter\argremovecomment \the\toks0 \comment\relax % % % Call the caller's macro, saved as \next in \parsearg. \expandafter\next\expandafter{\the\toks0}% }% } % Since all \c{,omment} does is throw away the argument, we can let TeX % do that for us. The \relax here is matched by the \relax in the call % in \parseargline; it could be more or less anything, its purpose is % just to delimit the argument to the \c. \def\argremovec#1\c#2\relax{\toks0 = {#1}} \def\argremovecomment#1\comment#2\relax{\toks0 = {#1}} % \argremovec{,omment} might leave us with trailing spaces, though; e.g., % @end itemize @c foo % will have two active spaces as part of the argument with the % `itemize'. Here we remove all active spaces from #1, and assign the % result to \toks0. % % This loses if there are any *other* active characters besides spaces % in the argument -- _ ^ +, for example -- since they get expanded. % Fortunately, Texinfo does not define any such commands. (If it ever % does, the catcode of the characters in questionwill have to be changed % here.) But this means we cannot call \removeactivespaces as part of % \argremovec{,omment}, since @c uses \parsearg, and thus the argument % that \parsearg gets might well have any character at all in it. % \def\removeactivespaces#1{% \begingroup \ignoreactivespaces \edef\temp{#1}% \global\toks0 = \expandafter{\temp}% \endgroup } % Change the active space to expand to nothing. % \begingroup \obeyspaces \gdef\ignoreactivespaces{\obeyspaces\let =\empty} \endgroup \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} %% These are used to keep @begin/@end levels from running away %% Call \inENV within environments (after a \begingroup) \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} \def\ENVcheck{% \ifENV\errmessage{Still within an environment; press RETURN to continue} \endgroup\fi} % This is not perfect, but it should reduce lossage % @begin foo is the same as @foo, for now. \newhelp\EMsimple{Press RETURN to continue.} \outer\def\begin{\parsearg\beginxxx} \def\beginxxx #1{% \expandafter\ifx\csname #1\endcsname\relax {\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else \csname #1\endcsname\fi} % @end foo executes the definition of \Efoo. % \def\end{\parsearg\endxxx} \def\endxxx #1{% \removeactivespaces{#1}% \edef\endthing{\the\toks0}% % \expandafter\ifx\csname E\endthing\endcsname\relax \expandafter\ifx\csname \endthing\endcsname\relax % There's no \foo, i.e., no ``environment'' foo. \errhelp = \EMsimple \errmessage{Undefined command `@end \endthing'}% \else \unmatchedenderror\endthing \fi \else % Everything's ok; the right environment has been started. \csname E\endthing\endcsname \fi } % There is an environment #1, but it hasn't been started. Give an error. % \def\unmatchedenderror#1{% \errhelp = \EMsimple \errmessage{This `@end #1' doesn't have a matching `@#1'}% } % Define the control sequence \E#1 to give an unmatched @end error. % \def\defineunmatchedend#1{% \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}% } % Single-spacing is done by various environments (specifically, in % \nonfillstart and \quotations). \newskip\singlespaceskip \singlespaceskip = 12.5pt \def\singlespace{% % Why was this kern here? It messes up equalizing space above and below % environments. --karl, 6may93 %{\advance \baselineskip by -\singlespaceskip %\kern \baselineskip}% \setleading\singlespaceskip } %% Simple single-character @ commands % @@ prints an @ % Kludge this until the fonts are right (grr). \def\@{{\tt\char64}} % This is turned off because it was never documented % and you can use @w{...} around a quote to suppress ligatures. %% Define @` and @' to be the same as ` and ' %% but suppressing ligatures. %\def\`{{`}} %\def\'{{'}} % Used to generate quoted braces. \def\mylbrace {{\tt\char123}} \def\myrbrace {{\tt\char125}} \let\{=\mylbrace \let\}=\myrbrace \begingroup % Definitions to produce actual \{ & \} command in an index. \catcode`\{ = 12 \catcode`\} = 12 \catcode`\[ = 1 \catcode`\] = 2 \catcode`\@ = 0 \catcode`\\ = 12 @gdef@lbracecmd[\{]% @gdef@rbracecmd[\}]% @endgroup % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent % Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H. \let\, = \c \let\dotaccent = \. \def\ringaccent#1{{\accent23 #1}} \let\tieaccent = \t \let\ubaraccent = \b \let\udotaccent = \d % Other special characters: @questiondown @exclamdown % Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss. \def\questiondown{?`} \def\exclamdown{!`} % Dotless i and dotless j, used for accents. \def\imacro{i} \def\jmacro{j} \def\dotless#1{% \def\temp{#1}% \ifx\temp\imacro \ptexi \else\ifx\temp\jmacro \j \else \errmessage{@dotless can be used only with i or j}% \fi\fi } % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space % at the beginning of a line will start with \penalty -- and % since \penalty is valid in vertical mode, we'd end up putting the % penalty on the vertical list instead of in the new paragraph. {\catcode`@ = 11 % Avoid using \@M directly, because that causes trouble % if the definition is written into an index file. \global\let\tiepenalty = \@M \gdef\tie{\leavevmode\penalty\tiepenalty\ } } % @: forces normal size whitespace following. \def\:{\spacefactor=1000 } % @* forces a line break. \def\*{\hfil\break\hbox{}\ignorespaces} % @. is an end-of-sentence period. \def\.{.\spacefactor=3000 } % @! is an end-of-sentence bang. \def\!{!\spacefactor=3000 } % @? is an end-of-sentence query. \def\?{?\spacefactor=3000 } % @w prevents a word break. Without the \leavevmode, @w at the % beginning of a paragraph, when TeX is still in vertical mode, would % produce a whole line of output instead of starting the paragraph. \def\w#1{\leavevmode\hbox{#1}} % @group ... @end group forces ... to be all on one page, by enclosing % it in a TeX vbox. We use \vtop instead of \vbox to construct the box % to keep its height that of a normal line. According to the rules for % \topskip (p.114 of the TeXbook), the glue inserted is % max (\topskip - \ht (first item), 0). If that height is large, % therefore, no glue is inserted, and the space between the headline and % the text is small, which looks bad. % \def\group{\begingroup \ifnum\catcode13=\active \else \errhelp = \groupinvalidhelp \errmessage{@group invalid in context where filling is enabled}% \fi % % The \vtop we start below produces a box with normal height and large % depth; thus, TeX puts \baselineskip glue before it, and (when the % next line of text is done) \lineskip glue after it. (See p.82 of % the TeXbook.) Thus, space below is not quite equal to space % above. But it's pretty close. \def\Egroup{% \egroup % End the \vtop. \endgroup % End the \group. }% % \vtop\bgroup % We have to put a strut on the last line in case the @group is in % the midst of an example, rather than completely enclosing it. % Otherwise, the interline space between the last line of the group % and the first line afterwards is too small. But we can't put the % strut in \Egroup, since there it would be on a line by itself. % Hence this just inserts a strut at the beginning of each line. \everypar = {\strut}% % % Since we have a strut on every line, we don't need any of TeX's % normal interline spacing. \offinterlineskip % % OK, but now we have to do something about blank % lines in the input in @example-like environments, which normally % just turn into \lisppar, which will insert no space now that we've % turned off the interline space. Simplest is to make them be an % empty paragraph. \ifx\par\lisppar \edef\par{\leavevmode \par}% % % Reset ^^M's definition to new definition of \par. \obeylines \fi % % Do @comment since we are called inside an environment such as % @example, where each end-of-line in the input causes an % end-of-line in the output. We don't want the end-of-line after % the `@group' to put extra space in the output. Since @group % should appear on a line by itself (according to the Texinfo % manual), we don't worry about eating any user text. \comment } % % TeX puts in an \escapechar (i.e., `@') at the beginning of the help % message, so this ends up printing `@group can only ...'. % \newhelp\groupinvalidhelp{% group can only be used in environments such as @example,^^J% where each line of input produces a line of output.} % @need space-in-mils % forces a page break if there is not space-in-mils remaining. \newdimen\mil \mil=0.001in \def\need{\parsearg\needx} % Old definition--didn't work. %\def\needx #1{\par % %% This method tries to make TeX break the page naturally %% if the depth of the box does not fit. %{\baselineskip=0pt% %\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak %\prevdepth=-1000pt %}} \def\needx#1{% % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. \par % % If the @need value is less than one line space, it's useless. \dimen0 = #1\mil \dimen2 = \ht\strutbox \advance\dimen2 by \dp\strutbox \ifdim\dimen0 > \dimen2 % % Do a \strut just to make the height of this box be normal, so the % normal leading is inserted relative to the preceding line. % And a page break here is fine. \vtop to #1\mil{\strut\vfil}% % % TeX does not even consider page breaks if a penalty added to the % main vertical list is 10000 or more. But in order to see if the % empty box we just added fits on the page, we must make it consider % page breaks. On the other hand, we don't want to actually break the % page after the empty box. So we use a penalty of 9999. % % There is an extremely small chance that TeX will actually break the % page at this \penalty, if there are no other feasible breakpoints in % sight. (If the user is using lots of big @group commands, which % almost-but-not-quite fill up a page, TeX will have a hard time doing % good page breaking, for example.) However, I could not construct an % example where a page broke at this \penalty; if it happens in a real % document, then we can reconsider our strategy. \penalty9999 % % Back up by the size of the box, whether we did a page break or not. \kern -#1\mil % % Do not allow a page break right after this kern. \nobreak \fi } % @br forces paragraph break \let\br = \par % @dots{} output an ellipsis using the current font. % We do .5em per period so that it has the same spacing in a typewriter % font as three actual period characters. % \def\dots{% \leavevmode \hbox to 1.5em{% \hskip 0pt plus 0.25fil minus 0.25fil .\hss.\hss.% \hskip 0pt plus 0.5fil minus 0.5fil }% } % @enddots{} is an end-of-sentence ellipsis. % \def\enddots{% \leavevmode \hbox to 2em{% \hskip 0pt plus 0.25fil minus 0.25fil .\hss.\hss.\hss.% \hskip 0pt plus 0.5fil minus 0.5fil }% \spacefactor=3000 } % @page forces the start of a new page % \def\page{\par\vfill\supereject} % @exdent text.... % outputs text on separate line in roman font, starting at standard page margin % This records the amount of indent in the innermost environment. % That's how much \exdent should take out. \newskip\exdentamount % This defn is used inside fill environments such as @defun. \def\exdent{\parsearg\exdentyyy} \def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}} % This defn is used inside nofill environments such as @example. \def\nofillexdent{\parsearg\nofillexdentyyy} \def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount \leftline{\hskip\leftskip{\rm#1}}}} % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current % paragraph. For more general purposes, use the \margin insertion % class. WHICH is `l' or `r'. % \newskip\inmarginspacing \inmarginspacing=1cm \def\strutdepth{\dp\strutbox} % \def\doinmargin#1#2{\strut\vadjust{% \nobreak \kern-\strutdepth \vtop to \strutdepth{% \baselineskip=\strutdepth \vss % if you have multiple lines of stuff to put here, you'll need to % make the vbox yourself of the appropriate size. \ifx#1l% \llap{\ignorespaces #2\hskip\inmarginspacing}% \else \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% \fi \null }% }} \def\inleftmargin{\doinmargin l} \def\inrightmargin{\doinmargin r} % % @inmargin{TEXT [, RIGHT-TEXT]} % (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; % else use TEXT for both). % \def\inmargin#1{\parseinmargin #1,,\finish} \def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. \setbox0 = \hbox{\ignorespaces #2}% \ifdim\wd0 > 0pt \def\lefttext{#1}% have both texts \def\righttext{#2}% \else \def\lefttext{#1}% have only one text \def\righttext{#1}% \fi % \ifodd\pageno \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin \else \def\temp{\inleftmargin\lefttext}% \fi \temp } % @include file insert text of that file as input. % Allow normal characters that we make active in the argument (a file name). \def\include{\begingroup \catcode`\\=12 \catcode`~=12 \catcode`^=12 \catcode`_=12 \catcode`|=12 \catcode`<=12 \catcode`>=12 \catcode`+=12 \parsearg\includezzz} % Restore active chars for included file. \def\includezzz#1{\endgroup\begingroup % Read the included file in a group so nested @include's work. \def\thisfile{#1}% \input\thisfile \endgroup} \def\thisfile{} % @center line outputs that line, centered \def\center{\parsearg\centerzzz} \def\centerzzz #1{{\advance\hsize by -\leftskip \advance\hsize by -\rightskip \centerline{#1}}} % @sp n outputs n lines of vertical space \def\sp{\parsearg\spxxx} \def\spxxx #1{\vskip #1\baselineskip} % @comment ...line which is ignored... % @c is the same as @comment % @ignore ... @end ignore is another way to write a comment \def\comment{\begingroup \catcode`\^^M=\other% \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% \commentxxx} {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} \let\c=\comment % @paragraphindent NCHARS % We'll use ems for NCHARS, close enough. % We cannot implement @paragraphindent asis, though. % \def\asisword{asis} % no translation, these are keywords \def\noneword{none} % \def\paragraphindent{\parsearg\doparagraphindent} \def\doparagraphindent#1{% \def\temp{#1}% \ifx\temp\asisword \else \ifx\temp\noneword \defaultparindent = 0pt \else \defaultparindent = #1em \fi \fi \parindent = \defaultparindent } % @exampleindent NCHARS % We'll use ems for NCHARS like @paragraphindent. % It seems @exampleindent asis isn't necessary, but % I preserve it to make it similar to @paragraphindent. \def\exampleindent{\parsearg\doexampleindent} \def\doexampleindent#1{% \def\temp{#1}% \ifx\temp\asisword \else \ifx\temp\noneword \lispnarrowing = 0pt \else \lispnarrowing = #1em \fi \fi } % @asis just yields its argument. Used with @table, for example. % \def\asis#1{#1} % @math outputs its argument in math mode. % We don't use $'s directly in the definition of \math because we need % to set catcodes according to plain TeX first, to allow for subscripts, % superscripts, special math chars, etc. % % @math does not do math typesetting in section titles, index % entries, and other such contexts where the catcodes are set before % @math gets a chance to work. This could perhaps be fixed, but for now % at least we can have real math in the main text, where it's needed most. % \let\implicitmath = $%$ font-lock fix % % One complication: _ usually means subscripts, but it could also mean % an actual _ character, as in @math{@var{some_variable} + 1}. So make % _ within @math be active (mathcode "8000), and distinguish by seeing % if the current family is \slfam, which is what @var uses. % {\catcode95 = \active % 95 = _ \gdef\mathunderscore{% \catcode95=\active \def_{\ifnum\fam=\slfam \_\else\sb\fi}% }} % % Another complication: we want \\ (and @\) to output a \ character. % FYI, plain.tex uses \\ as a temporary control sequence (why?), but % this is not advertised and we don't care. Texinfo does not % otherwise define @\. % % The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. \def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} % \def\math{% \tex \mathcode`\_="8000 \mathunderscore \let\\ = \mathbackslash \implicitmath\finishmath} \def\finishmath#1{#1\implicitmath\Etex} % @bullet and @minus need the same treatment as @math, just above. \def\bullet{\implicitmath\ptexbullet\implicitmath} \def\minus{\implicitmath-\implicitmath} % @refill is a no-op. \let\refill=\relax % If working on a large document in chapters, it is convenient to % be able to disable indexing, cross-referencing, and contents, for test runs. % This is done with @novalidate (before @setfilename). % \newif\iflinks \linkstrue % by default we want the aux files. \let\novalidate = \linksfalse % @setfilename is done at the beginning of every texinfo file. % So open here the files we need to have open while reading the input. % This makes it possible to make a .fmt file for texinfo. \def\setfilename{% \iflinks \readauxfile \fi % \openindices needs to do some work in any case. \openindices \fixbackslash % Turn off hack to swallow `\input texinfo'. \global\let\setfilename=\comment % Ignore extra @setfilename cmds. % % If texinfo.cnf is present on the system, read it. % Useful for site-wide @afourpaper, etc. % Just to be on the safe side, close the input stream before the \input. \openin 1 texinfo.cnf \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi \closein1 \temp % \comment % Ignore the actual filename. } % Called from \setfilename. % \def\openindices{% \newindex{cp}% \newcodeindex{fn}% \newcodeindex{vr}% \newcodeindex{tp}% \newcodeindex{ky}% \newcodeindex{pg}% } % @bye. \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} \message{pdf,} % adobe `portable' document format \newcount\tempnum \newcount\lnkcount \newtoks\filename \newcount\filenamelength \newcount\pgn \newtoks\toksA \newtoks\toksB \newtoks\toksC \newtoks\toksD \newbox\boxA \newcount\countA \newif\ifpdf \newif\ifpdfmakepagedest \ifx\pdfoutput\undefined \pdffalse \let\pdfmkdest = \gobble \let\pdfurl = \gobble \let\endlink = \relax \let\linkcolor = \relax \let\pdfmakeoutlines = \relax \else \pdftrue \pdfoutput = 1 \input pdfcolor \def\dopdfimage#1#2#3{% \def\imagewidth{#2}% \def\imageheight{#3}% % without \immediate, pdftex seg faults when the same image is % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) \ifnum\pdftexversion < 14 \immediate\pdfimage \else \immediate\pdfximage \fi \ifx\empty\imagewidth\else width \imagewidth \fi \ifx\empty\imageheight\else height \imageheight \fi \ifnum\pdftexversion<13 #1.pdf% \else {#1.pdf}% \fi \ifnum\pdftexversion < 14 \else \pdfrefximage \pdflastximage \fi} \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}} \def\pdfmkpgn#1{#1} \let\linkcolor = \Blue % was Cyan, but that seems light? \def\endlink{\Black\pdfendlink} % Adding outlines to PDF; macros for calculating structure of outlines % come from Petr Olsak \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% \else \csname#1\endcsname \fi} \def\advancenumber#1{\tempnum=\expnumber{#1}\relax \advance\tempnum by1 \expandafter\xdef\csname#1\endcsname{\the\tempnum}} \def\pdfmakeoutlines{{% \openin 1 \jobname.toc \ifeof 1\else\begingroup \closein 1 \indexnofonts \def\tt{} \let\_ = \normalunderscore % Thanh's hack / proper braces in bookmarks \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace % \def\chapentry ##1##2##3{} \let\appendixentry = \chapentry \def\unnumbchapentry ##1##2{} \def\secentry ##1##2##3##4{\advancenumber{chap##2}} \def\unnumbsecentry ##1##2##3{\advancenumber{chap##2}} \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} \def\unnumbsubsecentry ##1##2##3##4{\advancenumber{sec##2.##3}} \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} \def\unnumbsubsubsecentry ##1##2##3##4##5{\advancenumber{subsec##2.##3.##4}} \input \jobname.toc \def\chapentry ##1##2##3{% \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} \let\appendixentry = \chapentry \def\unnumbchapentry ##1##2{% \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} \def\secentry ##1##2##3##4{% \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} \def\unnumbsecentry ##1##2##3{% \pdfoutline goto name{\pdfmkpgn{##3}}{##1}} \def\subsecentry ##1##2##3##4##5{% \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} \def\unnumbsubsecentry ##1##2##3##4{% \pdfoutline goto name{\pdfmkpgn{##4}}{##1}} \def\subsubsecentry ##1##2##3##4##5##6{% \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} \def\unnumbsubsubsecentry ##1##2##3##4##5{% \pdfoutline goto name{\pdfmkpgn{##5}}{##1}} \input \jobname.toc \endgroup\fi }} \def\makelinks #1,{% \def\params{#1}\def\E{END}% \ifx\params\E \let\nextmakelinks=\relax \else \let\nextmakelinks=\makelinks \ifnum\lnkcount>0,\fi \picknum{#1}% \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{\the\pgn}}% \linkcolor #1% \advance\lnkcount by 1% \endlink \fi \nextmakelinks } \def\picknum#1{\expandafter\pn#1} \def\pn#1{% \def\p{#1}% \ifx\p\lbrace \let\nextpn=\ppn \else \let\nextpn=\ppnn \def\first{#1} \fi \nextpn } \def\ppn#1{\pgn=#1\gobble} \def\ppnn{\pgn=\first} \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces \ifx\p\space\else\addtokens{\filename}{\PP}% \advance\filenamelength by 1 \fi \fi \nextsp} \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} \ifnum\pdftexversion < 14 \let \startlink \pdfannotlink \else \let \startlink \pdfstartlink \fi \def\pdfurl#1{% \begingroup \normalturnoffactive\def\@{@}% \let\value=\expandablevalue \leavevmode\Red \startlink attr{/Border [0 0 0]}% user{/Subtype /Link /A << /S /URI /URI (#1) >>}% % #1 \endgroup} \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} \def\maketoks{% \expandafter\poptoks\the\toksA|ENDTOKS| \ifx\first0\adn0 \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 \else \ifnum0=\countA\else\makelink\fi \ifx\first.\let\next=\done\else \let\next=\maketoks \addtokens{\toksB}{\the\toksD} \ifx\first,\addtokens{\toksB}{\space}\fi \fi \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi \next} \def\makelink{\addtokens{\toksB}% {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} \def\pdflink#1{% \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} \linkcolor #1\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} \fi % \ifx\pdfoutput \message{fonts,} % Font-change commands. % Texinfo sort of supports the sans serif font style, which plain TeX does not. % So we set up a \sf analogous to plain's \rm, etc. \newfam\sffam \def\sf{\fam=\sffam \tensf} \let\li = \sf % Sometimes we call it \li, not \sf. % We don't need math for this one. \def\ttsl{\tenttsl} % Default leading. \newdimen\textleading \textleading = 13.2pt % Set the baselineskip to #1, and the lineskip and strut size % correspondingly. There is no deep meaning behind these magic numbers % used as factors; they just match (closely enough) what Knuth defined. % \def\lineskipfactor{.08333} \def\strutheightpercent{.70833} \def\strutdepthpercent {.29167} % \def\setleading#1{% \normalbaselineskip = #1\relax \normallineskip = \lineskipfactor\normalbaselineskip \normalbaselines \setbox\strutbox =\hbox{% \vrule width0pt height\strutheightpercent\baselineskip depth \strutdepthpercent \baselineskip }% } % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). % #3 is the font's design size, #4 is a scale factor \def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4} % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix % before you read in texinfo.tex. \ifx\fontprefix\undefined \def\fontprefix{cm} \fi % Support font families that don't use the same naming scheme as CM. \def\rmshape{r} \def\rmbshape{bx} %where the normal face is bold \def\bfshape{b} \def\bxshape{bx} \def\ttshape{tt} \def\ttbshape{tt} \def\ttslshape{sltt} \def\itshape{ti} \def\itbshape{bxti} \def\slshape{sl} \def\slbshape{bxsl} \def\sfshape{ss} \def\sfbshape{ss} \def\scshape{csc} \def\scbshape{csc} \newcount\mainmagstep \ifx\bigger\relax % not really supported. \let\mainmagstep=\magstep1 \setfont\textrm\rmshape{12}{1000} \setfont\texttt\ttshape{12}{1000} \else \mainmagstep=\magstephalf \setfont\textrm\rmshape{10}{\mainmagstep} \setfont\texttt\ttshape{10}{\mainmagstep} \fi % Instead of cmb10, you many want to use cmbx10. % cmbx10 is a prettier font on its own, but cmb10 % looks better when embedded in a line with cmr10. \setfont\textbf\bfshape{10}{\mainmagstep} \setfont\textit\itshape{10}{\mainmagstep} \setfont\textsl\slshape{10}{\mainmagstep} \setfont\textsf\sfshape{10}{\mainmagstep} \setfont\textsc\scshape{10}{\mainmagstep} \setfont\textttsl\ttslshape{10}{\mainmagstep} \font\texti=cmmi10 scaled \mainmagstep \font\textsy=cmsy10 scaled \mainmagstep % A few fonts for @defun, etc. \setfont\defbf\bxshape{10}{\magstep1} %was 1314 \setfont\deftt\ttshape{10}{\magstep1} \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} % Fonts for indices, footnotes, small examples (9pt). \setfont\smallrm\rmshape{9}{1000} \setfont\smalltt\ttshape{9}{1000} \setfont\smallbf\bfshape{10}{900} \setfont\smallit\itshape{9}{1000} \setfont\smallsl\slshape{9}{1000} \setfont\smallsf\sfshape{9}{1000} \setfont\smallsc\scshape{10}{900} \setfont\smallttsl\ttslshape{10}{900} \font\smalli=cmmi9 \font\smallsy=cmsy9 % Fonts for small examples (8pt). \setfont\smallerrm\rmshape{8}{1000} \setfont\smallertt\ttshape{8}{1000} \setfont\smallerbf\bfshape{10}{800} \setfont\smallerit\itshape{8}{1000} \setfont\smallersl\slshape{8}{1000} \setfont\smallersf\sfshape{8}{1000} \setfont\smallersc\scshape{10}{800} \setfont\smallerttsl\ttslshape{10}{800} \font\smalleri=cmmi8 \font\smallersy=cmsy8 % Fonts for title page: \setfont\titlerm\rmbshape{12}{\magstep3} \setfont\titleit\itbshape{10}{\magstep4} \setfont\titlesl\slbshape{10}{\magstep4} \setfont\titlett\ttbshape{12}{\magstep3} \setfont\titlettsl\ttslshape{10}{\magstep4} \setfont\titlesf\sfbshape{17}{\magstep1} \let\titlebf=\titlerm \setfont\titlesc\scbshape{10}{\magstep4} \font\titlei=cmmi12 scaled \magstep3 \font\titlesy=cmsy10 scaled \magstep4 \def\authorrm{\secrm} % Chapter (and unnumbered) fonts (17.28pt). \setfont\chaprm\rmbshape{12}{\magstep2} \setfont\chapit\itbshape{10}{\magstep3} \setfont\chapsl\slbshape{10}{\magstep3} \setfont\chaptt\ttbshape{12}{\magstep2} \setfont\chapttsl\ttslshape{10}{\magstep3} \setfont\chapsf\sfbshape{17}{1000} \let\chapbf=\chaprm \setfont\chapsc\scbshape{10}{\magstep3} \font\chapi=cmmi12 scaled \magstep2 \font\chapsy=cmsy10 scaled \magstep3 % Section fonts (14.4pt). \setfont\secrm\rmbshape{12}{\magstep1} \setfont\secit\itbshape{10}{\magstep2} \setfont\secsl\slbshape{10}{\magstep2} \setfont\sectt\ttbshape{12}{\magstep1} \setfont\secttsl\ttslshape{10}{\magstep2} \setfont\secsf\sfbshape{12}{\magstep1} \let\secbf\secrm \setfont\secsc\scbshape{10}{\magstep2} \font\seci=cmmi12 scaled \magstep1 \font\secsy=cmsy10 scaled \magstep2 % Subsection fonts (13.15pt). \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} \setfont\ssectt\ttbshape{12}{\magstephalf} \setfont\ssecttsl\ttslshape{10}{1315} \setfont\ssecsf\sfbshape{12}{\magstephalf} \let\ssecbf\ssecrm \setfont\ssecsc\scbshape{10}{\magstep1} \font\sseci=cmmi12 scaled \magstephalf \font\ssecsy=cmsy10 scaled 1315 % The smallcaps and symbol fonts should actually be scaled \magstep1.5, % but that is not a standard magnification. % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since % texinfo doesn't allow for producing subscripts and superscripts except % in the main text, we don't bother to reset \scriptfont and % \scriptscriptfont (which would also require loading a lot more fonts). % \def\resetmathfonts{% \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf \textfont\ttfam=\tentt \textfont\sffam=\tensf } % The font-changing commands redefine the meanings of \tenSTYLE, instead % of just \STYLE. We do this so that font changes will continue to work % in math mode, where it is the current \fam that is relevant in most % cases, not the current font. Plain TeX does \def\bf{\fam=\bffam % \tenbf}, for example. By redefining \tenbf, we obviate the need to % redefine \bf itself. \def\textfonts{% \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl \resetmathfonts \setleading{\textleading}} \def\titlefonts{% \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl \resetmathfonts \setleading{25pt}} \def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl \resetmathfonts \setleading{19pt}} \def\secfonts{% \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl \resetmathfonts \setleading{16pt}} \def\subsecfonts{% \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? \def\smallfonts{% \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy \let\tenttsl=\smallttsl \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl \resetmathfonts \setleading{9.5pt}} \let\smallexamplefonts = \smallerfonts % Set up the default fonts, so we can use them for creating boxes. % \textfonts % Define these so they can be easily changed for other fonts. \def\angleleft{$\langle$} \def\angleright{$\rangle$} % Count depth in font-changes, for error checks \newcount\fontdepth \fontdepth=0 % Fonts for short table of contents. \setfont\shortcontrm\rmshape{12}{1000} \setfont\shortcontbf\bxshape{12}{1000} \setfont\shortcontsl\slshape{12}{1000} %% Add scribe-like font environments, plus @l for inline lisp (usually sans %% serif) and @ii for TeX italic % \smartitalic{ARG} outputs arg in italics, followed by an italic correction % unless the following character is such as not to need one. \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} \def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx} \def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx} \let\i=\smartitalic \let\var=\smartslanted \let\dfn=\smartslanted \let\emph=\smartitalic \let\cite=\smartslanted \def\b#1{{\bf #1}} \let\strong=\b % We can't just use \exhyphenpenalty, because that only has effect at % the end of a paragraph. Restore normal hyphenation at the end of the % group within which \nohyphenation is presumably called. % \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} \def\restorehyphenation{\hyphenchar\font = `- } \def\t#1{% {\tt \rawbackslash \frenchspacing #1}% \null } \let\ttfont=\t \def\samp#1{`\tclose{#1}'\null} \setfont\keyrm\rmshape{8}{1000} \font\keysy=cmsy9 \def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% \vbox{\hrule\kern-0.4pt \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% \kern-0.4pt\hrule}% \kern-.06em\raise0.4pt\hbox{\angleright}}}} % The old definition, with no lozenge: %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} \def\ctrl #1{{\tt \rawbackslash \hat}#1} % @file, @option are the same as @samp. \let\file=\samp \let\option=\samp % @code is a modification of @t, % which makes spaces the same size as normal in the surrounding text. \def\tclose#1{% {% % Change normal interword space to be same as for the current font. \spaceskip = \fontdimen2\font % % Switch to typewriter. \tt % % But `\ ' produces the large typewriter interword space. \def\ {{\spaceskip = 0pt{} }}% % % Turn off hyphenation. \nohyphenation % \rawbackslash \frenchspacing #1% }% \null } % We *must* turn on hyphenation at `-' and `_' in \code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. % Unfortunately, TeX uses one parameter (\hyphenchar) to control % both hyphenation at - and hyphenation within words. % We must therefore turn them both off (\tclose does that) % and arrange explicitly to hyphenate at a dash. % -- rms. { \catcode`\-=\active \catcode`\_=\active % \global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex } % % If we end up with any active - characters when handling the index, % just treat them as a normal -. \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} \def\codedash{-\discretionary{}{}{}} \def\codeunder{% % this is all so @math{@code{var_name}+1} can work. In math mode, _ % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) % will therefore expand the active definition of _, which is us % (inside @code that is), therefore an endless loop. \ifusingtt{\ifmmode \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. \else\normalunderscore \fi \discretionary{}{}{}}% {\_}% } \def\codex #1{\tclose{#1}\endgroup} % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). \def\kbdinputstyle{\parsearg\kbdinputstylexxx} \def\kbdinputstylexxx#1{% \def\arg{#1}% \ifx\arg\worddistinct \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% \else\ifx\arg\wordexample \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% \else\ifx\arg\wordcode \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% \fi\fi\fi } \def\worddistinct{distinct} \def\wordexample{example} \def\wordcode{code} % Default is kbdinputdistinct. (Too much of a hassle to call the macro, % the catcodes are wrong for parsearg to work.) \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl} \def\xkey{\key} \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% \ifx\one\xkey\ifx\threex\three \key{#2}% \else{\tclose{\kbdfont\look}}\fi \else{\tclose{\kbdfont\look}}\fi} % For @url, @env, @command quotes seem unnecessary, so use \code. \let\url=\code \let\env=\code \let\command=\code % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url % itself. First (mandatory) arg is the url. Perhaps eventually put in % a hypertex \special here. % \def\uref#1{\douref #1,,,\finish} \def\douref#1,#2,#3,#4\finish{\begingroup \unsepspaces \pdfurl{#1}% \setbox0 = \hbox{\ignorespaces #3}% \ifdim\wd0 > 0pt \unhbox0 % third arg given, show only that \else \setbox0 = \hbox{\ignorespaces #2}% \ifdim\wd0 > 0pt \ifpdf \unhbox0 % PDF: 2nd arg given, show only it \else \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url \fi \else \code{#1}% only url given, so show it \fi \fi \endlink \endgroup} % rms does not like angle brackets --karl, 17may97. % So now @email is just like @uref, unless we are pdf. % %\def\email#1{\angleleft{\tt #1}\angleright} \ifpdf \def\email#1{\doemail#1,,\finish} \def\doemail#1,#2,#3\finish{\begingroup \unsepspaces \pdfurl{mailto:#1}% \setbox0 = \hbox{\ignorespaces #2}% \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi \endlink \endgroup} \else \let\email=\uref \fi % Check if we are currently using a typewriter font. Since all the % Computer Modern typewriter fonts have zero interword stretch (and % shrink), and it is reasonable to expect all typewriter fonts to have % this property, we can check that font parameter. % \def\ifmonospace{\ifdim\fontdimen3\font=0pt } % Typeset a dimension, e.g., `in' or `pt'. The only reason for the % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. % \def\dmn#1{\thinspace #1} \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} % @l was never documented to mean ``switch to the Lisp font'', % and it is not used as such in any manual I can find. We need it for % Polish suppressed-l. --karl, 22sep96. %\def\l#1{{\li #1}\null} % Explicit font changes: @r, @sc, undocumented @ii. \def\r#1{{\rm #1}} % roman font \def\sc#1{{\smallcaps#1}} % smallcaps font \def\ii#1{{\it #1}} % italic font % @acronym downcases the argument and prints in smallcaps. \def\acronym#1{{\smallcaps \lowercase{#1}}} % @pounds{} is a sterling sign. \def\pounds{{\it\$}} \message{page headings,} \newskip\titlepagetopglue \titlepagetopglue = 1.5in \newskip\titlepagebottomglue \titlepagebottomglue = 2pc % First the title page. Must do @settitle before @titlepage. \newif\ifseenauthor \newif\iffinishedtitlepage % Do an implicit @contents or @shortcontents after @end titlepage if the % user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. % \newif\ifsetcontentsaftertitlepage \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue \def\shorttitlepage{\parsearg\shorttitlepagezzz} \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% \endgroup\page\hbox{}\page} \def\titlepage{\begingroup \parindent=0pt \textfonts \let\subtitlerm=\tenrm \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% % \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% % % Leave some space at the very top of the page. \vglue\titlepagetopglue % % Now you can print the title using @title. \def\title{\parsearg\titlezzz}% \def\titlezzz##1{\leftline{\titlefonts\rm ##1} % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% % No rule at page bottom unless we print one at the top with @title. \finishedtitlepagetrue % % Now you can put text using @subtitle. \def\subtitle{\parsearg\subtitlezzz}% \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% % % @author should come last, but may come many times. \def\author{\parsearg\authorzzz}% \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi {\authorfont \leftline{##1}}}% % % Most title ``pages'' are actually two pages long, with space % at the top of the second. We don't want the ragged left on the second. \let\oldpage = \page \def\page{% \iffinishedtitlepage\else \finishtitlepage \fi \oldpage \let\page = \oldpage \hbox{}}% % \def\page{\oldpage \hbox{}} } \def\Etitlepage{% \iffinishedtitlepage\else \finishtitlepage \fi % It is important to do the page break before ending the group, % because the headline and footline are only empty inside the group. % If we use the new definition of \page, we always get a blank page % after the title page, which we certainly don't want. \oldpage \endgroup % % Need this before the \...aftertitlepage checks so that if they are % in effect the toc pages will come out with page numbers. \HEADINGSon % % If they want short, they certainly want long too. \ifsetshortcontentsaftertitlepage \shortcontents \contents \global\let\shortcontents = \relax \global\let\contents = \relax \fi % \ifsetcontentsaftertitlepage \contents \global\let\contents = \relax \global\let\shortcontents = \relax \fi } \def\finishtitlepage{% \vskip4pt \hrule height 2pt width \hsize \vskip\titlepagebottomglue \finishedtitlepagetrue } %%% Set up page headings and footings. \let\thispage=\folio \newtoks\evenheadline % headline on even pages \newtoks\oddheadline % headline on odd pages \newtoks\evenfootline % footline on even pages \newtoks\oddfootline % footline on odd pages % Now make Tex use those variables \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}} \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline \else \the\evenfootline \fi}\HEADINGShook} \let\HEADINGShook=\relax % Commands to set those variables. % For example, this is what @headings on does % @evenheading @thistitle|@thispage|@thischapter % @oddheading @thischapter|@thispage|@thistitle % @evenfooting @thisfile|| % @oddfooting ||@thisfile \def\evenheading{\parsearg\evenheadingxxx} \def\oddheading{\parsearg\oddheadingxxx} \def\everyheading{\parsearg\everyheadingxxx} \def\evenfooting{\parsearg\evenfootingxxx} \def\oddfooting{\parsearg\oddfootingxxx} \def\everyfooting{\parsearg\everyfootingxxx} {\catcode`\@=0 % \gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} \gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} \gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} \gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% % % Leave some space for the footline. Hopefully ok to assume % @evenfooting will not be used by itself. \global\advance\pageheight by -\baselineskip \global\advance\vsize by -\baselineskip } \gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} % }% unbind the catcode of @. % @headings double turns headings on for double-sided printing. % @headings single turns headings on for single-sided printing. % @headings off turns them off. % @headings on same as @headings double, retained for compatibility. % @headings after turns on double-sided headings after this page. % @headings doubleafter turns on double-sided headings after this page. % @headings singleafter turns on single-sided headings after this page. % By default, they are off at the start of a document, % and turned `on' after @end titlepage. \def\headings #1 {\csname HEADINGS#1\endcsname} \def\HEADINGSoff{ \global\evenheadline={\hfil} \global\evenfootline={\hfil} \global\oddheadline={\hfil} \global\oddfootline={\hfil}} \HEADINGSoff % When we turn headings on, set the page number to 1. % For double-sided printing, put current file name in lower left corner, % chapter name on inside top of right hand pages, document % title on inside top of left hand pages, and page numbers on outside top % edge of all pages. \def\HEADINGSdouble{ \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} \global\evenheadline={\line{\folio\hfil\thistitle}} \global\oddheadline={\line{\thischapter\hfil\folio}} \global\let\contentsalignmacro = \chapoddpage } \let\contentsalignmacro = \chappager % For single-sided printing, chapter title goes across top left of page, % page number on top right. \def\HEADINGSsingle{ \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} \global\evenheadline={\line{\thischapter\hfil\folio}} \global\oddheadline={\line{\thischapter\hfil\folio}} \global\let\contentsalignmacro = \chappager } \def\HEADINGSon{\HEADINGSdouble} \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} \let\HEADINGSdoubleafter=\HEADINGSafter \def\HEADINGSdoublex{% \global\evenfootline={\hfil} \global\oddfootline={\hfil} \global\evenheadline={\line{\folio\hfil\thistitle}} \global\oddheadline={\line{\thischapter\hfil\folio}} \global\let\contentsalignmacro = \chapoddpage } \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} \def\HEADINGSsinglex{% \global\evenfootline={\hfil} \global\oddfootline={\hfil} \global\evenheadline={\line{\thischapter\hfil\folio}} \global\oddheadline={\line{\thischapter\hfil\folio}} \global\let\contentsalignmacro = \chappager } % Subroutines used in generating headings % This produces Day Month Year style of output. % Only define if not already defined, in case a txi-??.tex file has set % up a different format (e.g., txi-cs.tex does this). \ifx\today\undefined \def\today{% \number\day\space \ifcase\month \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec \fi \space\number\year} \fi % @settitle line... specifies the title of the document, for headings. % It generates no output of its own. \def\thistitle{\putwordNoTitle} \def\settitle{\parsearg\settitlezzz} \def\settitlezzz #1{\gdef\thistitle{#1}} \message{tables,} % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). % default indentation of table text \newdimen\tableindent \tableindent=.8in % default indentation of @itemize and @enumerate text \newdimen\itemindent \itemindent=.3in % margin between end of table item and start of table text. \newdimen\itemmargin \itemmargin=.1in % used internally for \itemindent minus \itemmargin \newdimen\itemmax % Note @table, @vtable, and @vtable define @item, @itemx, etc., with % these defs. % They also define \itemindex % to index the item name in whatever manner is desired (perhaps none). \newif\ifitemxneedsnegativevskip \def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} \def\internalBitem{\smallbreak \parsearg\itemzzz} \def\internalBitemx{\itemxpar \parsearg\itemzzz} \def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} \def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz} \def\internalBkitem{\smallbreak \parsearg\kitemzzz} \def\internalBkitemx{\itemxpar \parsearg\kitemzzz} \def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% \itemzzz {#1}} \def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% \itemzzz {#1}} \def\itemzzz #1{\begingroup % \advance\hsize by -\rightskip \advance\hsize by -\tableindent \setbox0=\hbox{\itemfont{#1}}% \itemindex{#1}% \nobreak % This prevents a break before @itemx. % % If the item text does not fit in the space we have, put it on a line % by itself, and do not allow a page break either before or after that % line. We do not start a paragraph here because then if the next % command is, e.g., @kindex, the whatsit would get put into the % horizontal list on a line by itself, resulting in extra blank space. \ifdim \wd0>\itemmax % % Make this a paragraph so we get the \parskip glue and wrapping, % but leave it ragged-right. \begingroup \advance\leftskip by-\tableindent \advance\hsize by\tableindent \advance\rightskip by0pt plus1fil \leavevmode\unhbox0\par \endgroup % % We're going to be starting a paragraph, but we don't want the % \parskip glue -- logically it's part of the @item we just started. \nobreak \vskip-\parskip % % Stop a page break at the \parskip glue coming up. Unfortunately % we can't prevent a possible page break at the following % \baselineskip glue. \nobreak \endgroup \itemxneedsnegativevskipfalse \else % The item text fits into the space. Start a paragraph, so that the % following text (if any) will end up on the same line. \noindent % Do this with kerns and \unhbox so that if there is a footnote in % the item text, it can migrate to the main vertical list and % eventually be printed. \nobreak\kern-\tableindent \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 \unhbox0 \nobreak\kern\dimen0 \endgroup \itemxneedsnegativevskiptrue \fi } \def\item{\errmessage{@item while not in a table}} \def\itemx{\errmessage{@itemx while not in a table}} \def\kitem{\errmessage{@kitem while not in a table}} \def\kitemx{\errmessage{@kitemx while not in a table}} \def\xitem{\errmessage{@xitem while not in a table}} \def\xitemx{\errmessage{@xitemx while not in a table}} % Contains a kludge to get @end[description] to work. \def\description{\tablez{\dontindex}{1}{}{}{}{}} % @table, @ftable, @vtable. \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} {\obeylines\obeyspaces% \gdef\tablex #1^^M{% \tabley\dontindex#1 \endtabley}} \def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} {\obeylines\obeyspaces% \gdef\ftablex #1^^M{% \tabley\fnitemindex#1 \endtabley \def\Eftable{\endgraf\afterenvbreak\endgroup}% \let\Etable=\relax}} \def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex} {\obeylines\obeyspaces% \gdef\vtablex #1^^M{% \tabley\vritemindex#1 \endtabley \def\Evtable{\endgraf\afterenvbreak\endgroup}% \let\Etable=\relax}} \def\dontindex #1{} \def\fnitemindex #1{\doind {fn}{\code{#1}}}% \def\vritemindex #1{\doind {vr}{\code{#1}}}% {\obeyspaces % \gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% \tablez{#1}{#2}{#3}{#4}{#5}{#6}}} \def\tablez #1#2#3#4#5#6{% \aboveenvbreak % \begingroup % \def\Edescription{\Etable}% Necessary kludge. \let\itemindex=#1% \ifnum 0#3>0 \advance \leftskip by #3\mil \fi % \ifnum 0#4>0 \tableindent=#4\mil \fi % \ifnum 0#5>0 \advance \rightskip by #5\mil \fi % \def\itemfont{#2}% \itemmax=\tableindent % \advance \itemmax by -\itemmargin % \advance \leftskip by \tableindent % \exdentamount=\tableindent \parindent = 0pt \parskip = \smallskipamount \ifdim \parskip=0pt \parskip=2pt \fi% \def\Etable{\endgraf\afterenvbreak\endgroup}% \let\item = \internalBitem % \let\itemx = \internalBitemx % \let\kitem = \internalBkitem % \let\kitemx = \internalBkitemx % \let\xitem = \internalBxitem % \let\xitemx = \internalBxitemx % } % This is the counter used by @enumerate, which is really @itemize \newcount \itemno \def\itemize{\parsearg\itemizezzz} \def\itemizezzz #1{% \begingroup % ended by the @end itemize \itemizey {#1}{\Eitemize} } \def\itemizey #1#2{% \aboveenvbreak % \itemmax=\itemindent % \advance \itemmax by -\itemmargin % \advance \leftskip by \itemindent % \exdentamount=\itemindent \parindent = 0pt % \parskip = \smallskipamount % \ifdim \parskip=0pt \parskip=2pt \fi% \def#2{\endgraf\afterenvbreak\endgroup}% \def\itemcontents{#1}% \let\item=\itemizeitem} % Set sfcode to normal for the chars that usually have another value. % These are `.?!:;,' \def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } % \splitoff TOKENS\endmark defines \first to be the first token in % TOKENS, and \rest to be the remainder. % \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% % Allow an optional argument of an uppercase letter, lowercase letter, % or number, to specify the first label in the enumerated list. No % argument is the same as `1'. % \def\enumerate{\parsearg\enumeratezzz} \def\enumeratezzz #1{\enumeratey #1 \endenumeratey} \def\enumeratey #1 #2\endenumeratey{% \begingroup % ended by the @end enumerate % % If we were given no argument, pretend we were given `1'. \def\thearg{#1}% \ifx\thearg\empty \def\thearg{1}\fi % % Detect if the argument is a single token. If so, it might be a % letter. Otherwise, the only valid thing it can be is a number. % (We will always have one token, because of the test we just made. % This is a good thing, since \splitoff doesn't work given nothing at % all -- the first parameter is undelimited.) \expandafter\splitoff\thearg\endmark \ifx\rest\empty % Only one token in the argument. It could still be anything. % A ``lowercase letter'' is one whose \lccode is nonzero. % An ``uppercase letter'' is one whose \lccode is both nonzero, and % not equal to itself. % Otherwise, we assume it's a number. % % We need the \relax at the end of the \ifnum lines to stop TeX from % continuing to look for a <number>. % \ifnum\lccode\expandafter`\thearg=0\relax \numericenumerate % a number (we hope) \else % It's a letter. \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax \lowercaseenumerate % lowercase letter \else \uppercaseenumerate % uppercase letter \fi \fi \else % Multiple tokens in the argument. We hope it's a number. \numericenumerate \fi } % An @enumerate whose labels are integers. The starting integer is % given in \thearg. % \def\numericenumerate{% \itemno = \thearg \startenumeration{\the\itemno}% } % The starting (lowercase) letter is in \thearg. \def\lowercaseenumerate{% \itemno = \expandafter`\thearg \startenumeration{% % Be sure we're not beyond the end of the alphabet. \ifnum\itemno=0 \errmessage{No more lowercase letters in @enumerate; get a bigger alphabet}% \fi \char\lccode\itemno }% } % The starting (uppercase) letter is in \thearg. \def\uppercaseenumerate{% \itemno = \expandafter`\thearg \startenumeration{% % Be sure we're not beyond the end of the alphabet. \ifnum\itemno=0 \errmessage{No more uppercase letters in @enumerate; get a bigger alphabet} \fi \char\uccode\itemno }% } % Call itemizey, adding a period to the first argument and supplying the % common last two arguments. Also subtract one from the initial value in % \itemno, since @item increments \itemno. % \def\startenumeration#1{% \advance\itemno by -1 \itemizey{#1.}\Eenumerate\flushcr } % @alphaenumerate and @capsenumerate are abbreviations for giving an arg % to @enumerate. % \def\alphaenumerate{\enumerate{a}} \def\capsenumerate{\enumerate{A}} \def\Ealphaenumerate{\Eenumerate} \def\Ecapsenumerate{\Eenumerate} % Definition of @item while inside @itemize. \def\itemizeitem{% \advance\itemno by 1 {\let\par=\endgraf \smallbreak}% \ifhmode \errmessage{In hmode at itemizeitem}\fi {\parskip=0in \hskip 0pt \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% \vadjust{\penalty 1200}}% \flushcr} % @multitable macros % Amy Hendrickson, 8/18/94, 3/6/96 % % @multitable ... @end multitable will make as many columns as desired. % Contents of each column will wrap at width given in preamble. Width % can be specified either with sample text given in a template line, % or in percent of \hsize, the current width of text on page. % Table can continue over pages but will only break between lines. % To make preamble: % % Either define widths of columns in terms of percent of \hsize: % @multitable @columnfractions .25 .3 .45 % @item ... % % Numbers following @columnfractions are the percent of the total % current hsize to be used for each column. You may use as many % columns as desired. % Or use a template: % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item ... % using the widest term desired in each column. % % For those who want to use more than one line's worth of words in % the preamble, break the line within one argument and it % will parse correctly, i.e., % % @multitable {Column 1 template} {Column 2 template} {Column 3 % template} % Not: % @multitable {Column 1 template} {Column 2 template} % {Column 3 template} % Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. % @item, @tab, @multitable or @end multitable do not need to be on their % own lines, but it will not hurt if they are. % Sample multitable: % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item first col stuff @tab second col stuff @tab third col % @item % first col stuff % @tab % second col stuff % @tab % third col % @item first col stuff @tab second col stuff % @tab Many paragraphs of text may be used in any column. % % They will wrap at the width determined by the template. % @item@tab@tab This will be in third column. % @end multitable % Default dimensions may be reset by user. % @multitableparskip is vertical space between paragraphs in table. % @multitableparindent is paragraph indent in table. % @multitablecolmargin is horizontal space to be left between columns. % @multitablelinespace is space to leave between table items, baseline % to baseline. % 0pt means it depends on current normal line spacing. % \newskip\multitableparskip \newskip\multitableparindent \newdimen\multitablecolspace \newskip\multitablelinespace \multitableparskip=0pt \multitableparindent=6pt \multitablecolspace=12pt \multitablelinespace=0pt % Macros used to set up halign preamble: % \let\endsetuptable\relax \def\xendsetuptable{\endsetuptable} \let\columnfractions\relax \def\xcolumnfractions{\columnfractions} \newif\ifsetpercent % #1 is the part of the @columnfraction before the decimal point, which % is presumably either 0 or the empty string (but we don't check, we % just throw it away). #2 is the decimal part, which we use as the % percent of \hsize for this column. \def\pickupwholefraction#1.#2 {% \global\advance\colcount by 1 \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% \setuptable } \newcount\colcount \def\setuptable#1{% \def\firstarg{#1}% \ifx\firstarg\xendsetuptable \let\go = \relax \else \ifx\firstarg\xcolumnfractions \global\setpercenttrue \else \ifsetpercent \let\go\pickupwholefraction \else \global\advance\colcount by 1 \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; % typically that is always in the input, anyway. \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% \fi \fi \ifx\go\pickupwholefraction % Put the argument back for the \pickupwholefraction call, so % we'll always have a period there to be parsed. \def\go{\pickupwholefraction#1}% \else \let\go = \setuptable \fi% \fi \go } % This used to have \hskip1sp. But then the space in a template line is % not enough. That is bad. So let's go back to just & until we % encounter the problem it was intended to solve again. % --karl, nathan@acm.org, 20apr99. \def\tab{&} % @multitable ... @end multitable definitions: % \def\multitable{\parsearg\dotable} \def\dotable#1{\bgroup \vskip\parskip \let\item\crcr \tolerance=9500 \hbadness=9500 \setmultitablespacing \parskip=\multitableparskip \parindent=\multitableparindent \overfullrule=0pt \global\colcount=0 \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% % % To parse everything between @multitable and @item: \setuptable#1 \endsetuptable % % \everycr will reset column counter, \colcount, at the end of % each line. Every column entry will cause \colcount to advance by one. % The table preamble % looks at the current \colcount to find the correct column width. \everycr{\noalign{% % % \filbreak%% keeps underfull box messages off when table breaks over pages. % Maybe so, but it also creates really weird page breaks when the table % breaks over pages. Wouldn't \vfil be better? Wait until the problem % manifests itself, so it can be fixed for real --karl. \global\colcount=0\relax}}% % % This preamble sets up a generic column definition, which will % be used as many times as user calls for columns. % \vtop will set a single line and will also let text wrap and % continue for many paragraphs if desired. \halign\bgroup&\global\advance\colcount by 1\relax \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname % % In order to keep entries from bumping into each other % we will add a \leftskip of \multitablecolspace to all columns after % the first one. % % If a template has been used, we will add \multitablecolspace % to the width of each template entry. % % If the user has set preamble in terms of percent of \hsize we will % use that dimension as the width of the column, and the \leftskip % will keep entries from bumping into each other. Table will start at % left margin and final column will justify at right margin. % % Make sure we don't inherit \rightskip from the outer environment. \rightskip=0pt \ifnum\colcount=1 % The first column will be indented with the surrounding text. \advance\hsize by\leftskip \else \ifsetpercent \else % If user has not set preamble in terms of percent of \hsize % we will advance \hsize by \multitablecolspace. \advance\hsize by \multitablecolspace \fi % In either case we will make \leftskip=\multitablecolspace: \leftskip=\multitablecolspace \fi % Ignoring space at the beginning and end avoids an occasional spurious % blank line, when TeX decides to break the line at the space before the % box from the multistrut, so the strut ends up on a line by itself. % For example: % @multitable @columnfractions .11 .89 % @item @code{#} % @tab Legal holiday which is valid in major parts of the whole country. % Is automatically provided with highlighting sequences respectively marking % characters. \noindent\ignorespaces##\unskip\multistrut}\cr } \def\setmultitablespacing{% test to see if user has set \multitablelinespace. % If so, do nothing. If not, give it an appropriate dimension based on % current baselineskip. \ifdim\multitablelinespace=0pt \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 %% strut to put in table in case some entry doesn't have descenders, %% to keep lines equally spaced \let\multistrut = \strut \else %% FIXME: what is \box0 supposed to be? \gdef\multistrut{\vrule height\multitablelinespace depth\dp0 width0pt\relax} \fi %% Test to see if parskip is larger than space between lines of %% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller %% than skip between lines in the table. \fi% \ifdim\multitableparskip=0pt \global\multitableparskip=\multitablelinespace \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller %% than skip between lines in the table. \fi} \message{conditionals,} % Prevent errors for section commands. % Used in @ignore and in failing conditionals. \def\ignoresections{% \let\chapter=\relax \let\unnumbered=\relax \let\top=\relax \let\unnumberedsec=\relax \let\unnumberedsection=\relax \let\unnumberedsubsec=\relax \let\unnumberedsubsection=\relax \let\unnumberedsubsubsec=\relax \let\unnumberedsubsubsection=\relax \let\section=\relax \let\subsec=\relax \let\subsubsec=\relax \let\subsection=\relax \let\subsubsection=\relax \let\appendix=\relax \let\appendixsec=\relax \let\appendixsection=\relax \let\appendixsubsec=\relax \let\appendixsubsection=\relax \let\appendixsubsubsec=\relax \let\appendixsubsubsection=\relax \let\contents=\relax \let\smallbook=\relax \let\titlepage=\relax } % Used in nested conditionals, where we have to parse the Texinfo source % and so want to turn off most commands, in case they are used % incorrectly. % \def\ignoremorecommands{% \let\defcodeindex = \relax \let\defcv = \relax \let\deffn = \relax \let\deffnx = \relax \let\defindex = \relax \let\defivar = \relax \let\defmac = \relax \let\defmethod = \relax \let\defop = \relax \let\defopt = \relax \let\defspec = \relax \let\deftp = \relax \let\deftypefn = \relax \let\deftypefun = \relax \let\deftypeivar = \relax \let\deftypeop = \relax \let\deftypevar = \relax \let\deftypevr = \relax \let\defun = \relax \let\defvar = \relax \let\defvr = \relax \let\ref = \relax \let\xref = \relax \let\printindex = \relax \let\pxref = \relax \let\settitle = \relax \let\setchapternewpage = \relax \let\setchapterstyle = \relax \let\everyheading = \relax \let\evenheading = \relax \let\oddheading = \relax \let\everyfooting = \relax \let\evenfooting = \relax \let\oddfooting = \relax \let\headings = \relax \let\include = \relax \let\lowersections = \relax \let\down = \relax \let\raisesections = \relax \let\up = \relax \let\set = \relax \let\clear = \relax \let\item = \relax } % Ignore @ignore, @ifhtml, @ifinfo, @ifplaintext, @ifnottex, @html, @menu, % @direntry, and @documentdescription. % \def\ignore{\doignore{ignore}} \def\ifhtml{\doignore{ifhtml}} \def\ifinfo{\doignore{ifinfo}} \def\ifplaintext{\doignore{ifplaintext}} \def\ifnottex{\doignore{ifnottex}} \def\html{\doignore{html}} \def\menu{\doignore{menu}} \def\direntry{\doignore{direntry}} \def\documentdescription{\doignore{documentdescription}} \def\documentdescriptionword{documentdescription} % @dircategory CATEGORY -- specify a category of the dir file % which this file should belong to. Ignore this in TeX. \let\dircategory = \comment % Ignore text until a line `@end #1'. % \def\doignore#1{\begingroup % Don't complain about control sequences we have declared \outer. \ignoresections % % Define a command to swallow text until we reach `@end #1'. % This @ is a catcode 12 token (that is the normal catcode of @ in % this texinfo.tex file). We change the catcode of @ below to match. \long\def\doignoretext##1@end #1{\enddoignore}% % % Make sure that spaces turn into tokens that match what \doignoretext wants. \catcode32 = 10 % % Ignore braces, too, so mismatched braces don't cause trouble. \catcode`\{ = 9 \catcode`\} = 9 % % We must not have @c interpreted as a control sequence. \catcode`\@ = 12 % \def\ignoreword{#1}% \ifx\ignoreword\documentdescriptionword % The c kludge breaks documentdescription, since % `documentdescription' contains a `c'. Means not everything will % be ignored inside @documentdescription, but oh well... \else % Make the letter c a comment character so that the rest of the line % will be ignored. This way, the document can have (for example) % @c @end ifinfo % and the @end ifinfo will be properly ignored. % (We've just changed @ to catcode 12.) \catcode`\c = 14 \fi % % And now expand the command defined above. \doignoretext } % What we do to finish off ignored text. % \def\enddoignore{\endgroup\ignorespaces}% \newif\ifwarnedobs\warnedobsfalse \def\obstexwarn{% \ifwarnedobs\relax\else % We need to warn folks that they may have trouble with TeX 3.0. % This uses \immediate\write16 rather than \message to get newlines. \immediate\write16{} \immediate\write16{WARNING: for users of Unix TeX 3.0!} \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} \immediate\write16{If you are running another version of TeX, relax.} \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} \immediate\write16{ Then upgrade your TeX installation if you can.} \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} \immediate\write16{If you are stuck with version 3.0, run the} \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} \immediate\write16{ to use a workaround.} \immediate\write16{} \global\warnedobstrue \fi } % **In TeX 3.0, setting text in \nullfont hangs tex. For a % workaround (which requires the file ``dummy.tfm'' to be installed), % uncomment the following line: %%%%%\font\nullfont=dummy\let\obstexwarn=\relax % Ignore text, except that we keep track of conditional commands for % purposes of nesting, up to an `@end #1' command. % \def\nestedignore#1{% \obstexwarn % We must actually expand the ignored text to look for the @end % command, so that nested ignore constructs work. Thus, we put the % text into a \vbox and then do nothing with the result. To minimize % the change of memory overflow, we follow the approach outlined on % page 401 of the TeXbook: make the current font be a dummy font. % \setbox0 = \vbox\bgroup % Don't complain about control sequences we have declared \outer. \ignoresections % % Define `@end #1' to end the box, which will in turn undefine the % @end command again. \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% % % We are going to be parsing Texinfo commands. Most cause no % trouble when they are used incorrectly, but some commands do % complicated argument parsing or otherwise get confused, so we % undefine them. % % We can't do anything about stray @-signs, unfortunately; % they'll produce `undefined control sequence' errors. \ignoremorecommands % % Set the current font to be \nullfont, a TeX primitive, and define % all the font commands to also use \nullfont. We don't use % dummy.tfm, as suggested in the TeXbook, because not all sites % might have that installed. Therefore, math mode will still % produce output, but that should be an extremely small amount of % stuff compared to the main input. % \nullfont \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont \let\tensf=\nullfont % Similarly for index fonts. \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont \let\smallsf=\nullfont % Similarly for smallexample fonts. \let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont \let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont \let\smallersf=\nullfont % % Don't complain when characters are missing from the fonts. \tracinglostchars = 0 % % Don't bother to do space factor calculations. \frenchspacing % % Don't report underfull hboxes. \hbadness = 10000 % % Do minimal line-breaking. \pretolerance = 10000 % % Do not execute instructions in @tex \def\tex{\doignore{tex}}% % Do not execute macro definitions. % `c' is a comment character, so the word `macro' will get cut off. \def\macro{\doignore{ma}}% } % @set VAR sets the variable VAR to an empty value. % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. % % Since we want to separate VAR from REST-OF-LINE (which might be % empty), we can't just use \parsearg; we have to insert a space of our % own to delimit the rest of the line, and then take it out again if we % didn't need it. Make sure the catcode of space is correct to avoid % losing inside @example, for instance. % \def\set{\begingroup\catcode` =10 \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. \parsearg\setxxx} \def\setxxx#1{\setyyy#1 \endsetyyy} \def\setyyy#1 #2\endsetyyy{% \def\temp{#2}% \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. \fi \endgroup } % Can't use \xdef to pre-expand #2 and save some time, since \temp or % \next or other control sequences that we've defined might get us into % an infinite loop. Consider `@set foo @cite{bar}'. \def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} % @clear VAR clears (i.e., unsets) the variable VAR. % \def\clear{\parsearg\clearxxx} \def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} % @value{foo} gets the text saved in variable foo. { \catcode`\_ = \active % % We might end up with active _ or - characters in the argument if % we're called from @code, as @code{@value{foo-bar_}}. So \let any % such active characters to their normal equivalents. \gdef\value{\begingroup \catcode`\-=12 \catcode`\_=12 \indexbreaks \let_\normalunderscore \valuexxx} } \def\valuexxx#1{\expandablevalue{#1}\endgroup} % We have this subroutine so that we can handle at least some @value's % properly in indexes (we \let\value to this in \indexdummies). Ones % whose names contain - or _ still won't work, but we can't do anything % about that. The command has to be fully expandable, since the result % winds up in the index file. This means that if the variable's value % contains other Texinfo commands, it's almost certain it will fail % (although perhaps we could fix that with sufficient work to do a % one-level expansion on the result, instead of complete). % \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax {[No value for ``#1'']}% \else \csname SET#1\endcsname \fi } % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. % \def\ifset{\parsearg\ifsetxxx} \def\ifsetxxx #1{% \expandafter\ifx\csname SET#1\endcsname\relax \expandafter\ifsetfail \else \expandafter\ifsetsucceed \fi } \def\ifsetsucceed{\conditionalsucceed{ifset}} \def\ifsetfail{\nestedignore{ifset}} \defineunmatchedend{ifset} % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % \def\ifclear{\parsearg\ifclearxxx} \def\ifclearxxx #1{% \expandafter\ifx\csname SET#1\endcsname\relax \expandafter\ifclearsucceed \else \expandafter\ifclearfail \fi } \def\ifclearsucceed{\conditionalsucceed{ifclear}} \def\ifclearfail{\nestedignore{ifclear}} \defineunmatchedend{ifclear} % @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we % read the text following, through the first @end iftex (etc.). Make % `@end iftex' (etc.) valid only after an @iftex. % \def\iftex{\conditionalsucceed{iftex}} \def\ifnothtml{\conditionalsucceed{ifnothtml}} \def\ifnotinfo{\conditionalsucceed{ifnotinfo}} \def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}} \defineunmatchedend{iftex} \defineunmatchedend{ifnothtml} \defineunmatchedend{ifnotinfo} \defineunmatchedend{ifnotplaintext} % We can't just want to start a group at @iftex (etc.) and end it at % @end iftex, since then @set commands inside the conditional have no % effect (they'd get reverted at the end of the group). So we must % define \Eiftex to redefine itself to be its previous value. (We can't % just define it to fail again with an ``unmatched end'' error, since % the @ifset might be nested.) % \def\conditionalsucceed#1{% \edef\temp{% % Remember the current value of \E#1. \let\nece{prevE#1} = \nece{E#1}% % % At the `@end #1', redefine \E#1 to be its previous value. \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% }% \temp } % We need to expand lots of \csname's, but we don't want to expand the % control sequences after we've constructed them. % \def\nece#1{\expandafter\noexpand\csname#1\endcsname} % @defininfoenclose. \let\definfoenclose=\comment \message{indexing,} % Index generation facilities % Define \newwrite to be identical to plain tex's \newwrite % except not \outer, so it can be used within \newindex. {\catcode`\@=11 \gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} % \newindex {foo} defines an index named foo. % It automatically defines \fooindex such that % \fooindex ...rest of line... puts an entry in the index foo. % It also defines \fooindfile to be the number of the output channel for % the file that accumulates this index. The file's extension is foo. % The name of an index should be no more than 2 characters long % for the sake of vms. % \def\newindex#1{% \iflinks \expandafter\newwrite \csname#1indfile\endcsname \openout \csname#1indfile\endcsname \jobname.#1 % Open the file \fi \expandafter\xdef\csname#1index\endcsname{% % Define @#1index \noexpand\doindex{#1}} } % @defindex foo == \newindex{foo} % \def\defindex{\parsearg\newindex} % Define @defcodeindex, like @defindex except put all entries in @code. % \def\defcodeindex{\parsearg\newcodeindex} % \def\newcodeindex#1{% \iflinks \expandafter\newwrite \csname#1indfile\endcsname \openout \csname#1indfile\endcsname \jobname.#1 \fi \expandafter\xdef\csname#1index\endcsname{% \noexpand\docodeindex{#1}}% } % @synindex foo bar makes index foo feed into index bar. % Do this instead of @defindex foo if you don't want it as a separate index. % % @syncodeindex foo bar similar, but put all entries made for index foo % inside @code. % \def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} \def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} % #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), % #3 the target index (bar). \def\dosynindex#1#2#3{% % Only do \closeout if we haven't already done it, else we'll end up % closing the target index. \expandafter \ifx\csname donesynindex#2\endcsname \undefined % The \closeout helps reduce unnecessary open files; the limit on the % Acorn RISC OS is a mere 16 files. \expandafter\closeout\csname#2indfile\endcsname \expandafter\let\csname\donesynindex#2\endcsname = 1 \fi % redefine \fooindfile: \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname \expandafter\let\csname#2indfile\endcsname=\temp % redefine \fooindex: \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% } % Define \doindex, the driver for all \fooindex macros. % Argument #1 is generated by the calling \fooindex macro, % and it is "foo", the name of the index. % \doindex just uses \parsearg; it calls \doind for the actual work. % This is because \doind is more useful to call from other macros. % There is also \dosubind {index}{topic}{subtopic} % which makes an entry in a two-level index such as the operation index. \def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} \def\singleindexer #1{\doind{\indexname}{#1}} % like the previous two, but they put @code around the argument. \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} % Take care of texinfo commands likely to appear in an index entry. % (Must be a way to avoid doing expansion at all, and thus not have to % laboriously list every single command here.) % \def\indexdummies{% \def\ { }% \def\@{@}% change to @@ when we switch to @ as escape char in aux files. % Need these in case \tex is in effect and \{ is a \delimiter again. % But can't use \lbracecmd and \rbracecmd because texindex assumes % braces and backslashes are used only as delimiters. \let\{ = \mylbrace \let\} = \myrbrace \def\_{{\realbackslash _}}% \normalturnoffactive % % Take care of the plain tex accent commands. \def\,##1{\realbackslash ,{##1}}% \def\"{\realbackslash "}% \def\`{\realbackslash `}% \def\'{\realbackslash '}% \def\^{\realbackslash ^}% \def\~{\realbackslash ~}% \def\={\realbackslash =}% \def\b{\realbackslash b}% \def\c{\realbackslash c}% \def\d{\realbackslash d}% \def\u{\realbackslash u}% \def\v{\realbackslash v}% \def\H{\realbackslash H}% \def\dotless##1{\realbackslash dotless {##1}}% % Take care of the plain tex special European modified letters. \def\AA{\realbackslash AA}% \def\AE{\realbackslash AE}% \def\L{\realbackslash L}% \def\OE{\realbackslash OE}% \def\O{\realbackslash O}% \def\aa{\realbackslash aa}% \def\ae{\realbackslash ae}% \def\l{\realbackslash l}% \def\oe{\realbackslash oe}% \def\o{\realbackslash o}% \def\ss{\realbackslash ss}% % % Although these internals commands shouldn't show up, sometimes they do. \def\bf{\realbackslash bf }% \def\gtr{\realbackslash gtr}% \def\hat{\realbackslash hat}% \def\less{\realbackslash less}% %\def\rm{\realbackslash rm }% \def\sf{\realbackslash sf}% \def\sl{\realbackslash sl }% \def\tclose##1{\realbackslash tclose {##1}}% \def\tt{\realbackslash tt}% % \def\b##1{\realbackslash b {##1}}% \def\i##1{\realbackslash i {##1}}% \def\sc##1{\realbackslash sc {##1}}% \def\t##1{\realbackslash t {##1}}% \def\r##1{\realbackslash r {##1}}% % \def\TeX{\realbackslash TeX}% \def\LaTeX{\realbackslash LaTeX}% \def\acronym##1{\realbackslash acronym {##1}}% \def\cite##1{\realbackslash cite {##1}}% \def\code##1{\realbackslash code {##1}}% \def\command##1{\realbackslash command {##1}}% \def\dfn##1{\realbackslash dfn {##1}}% \def\dots{\realbackslash dots }% \def\emph##1{\realbackslash emph {##1}}% \def\env##1{\realbackslash env {##1}}% \def\file##1{\realbackslash file {##1}}% \def\kbd##1{\realbackslash kbd {##1}}% \def\key##1{\realbackslash key {##1}}% \def\math##1{\realbackslash math {##1}}% \def\option##1{\realbackslash option {##1}}% \def\samp##1{\realbackslash samp {##1}}% \def\strong##1{\realbackslash strong {##1}}% \def\uref##1{\realbackslash uref {##1}}% \def\url##1{\realbackslash url {##1}}% \def\var##1{\realbackslash var {##1}}% \def\w{\realbackslash w }% % % These math commands don't seem likely to be used in index entries. \def\copyright{\realbackslash copyright}% \def\equiv{\realbackslash equiv}% \def\error{\realbackslash error}% \def\expansion{\realbackslash expansion}% \def\point{\realbackslash point}% \def\print{\realbackslash print}% \def\result{\realbackslash result}% % % Handle some cases of @value -- where the variable name does not % contain - or _, and the value does not contain any % (non-fully-expandable) commands. \let\value = \expandablevalue % \unsepspaces % Turn off macro expansion \turnoffmacros } % If an index command is used in an @example environment, any spaces % therein should become regular spaces in the raw index file, not the % expansion of \tie (\leavevmode \penalty \@M \ ). {\obeyspaces \gdef\unsepspaces{\obeyspaces\let =\space}} % \indexnofonts no-ops all font-change commands. % This is used when outputting the strings to sort the index by. \def\indexdummyfont#1{#1} \def\indexdummytex{TeX} \def\indexdummydots{...} \def\indexnofonts{% \def\@{@}% % how to handle braces? \def\_{\normalunderscore}% % \let\,=\indexdummyfont \let\"=\indexdummyfont \let\`=\indexdummyfont \let\'=\indexdummyfont \let\^=\indexdummyfont \let\~=\indexdummyfont \let\==\indexdummyfont \let\b=\indexdummyfont \let\c=\indexdummyfont \let\d=\indexdummyfont \let\u=\indexdummyfont \let\v=\indexdummyfont \let\H=\indexdummyfont \let\dotless=\indexdummyfont % Take care of the plain tex special European modified letters. \def\AA{AA}% \def\AE{AE}% \def\L{L}% \def\OE{OE}% \def\O{O}% \def\aa{aa}% \def\ae{ae}% \def\l{l}% \def\oe{oe}% \def\o{o}% \def\ss{ss}% % % Don't no-op \tt, since it isn't a user-level command % and is used in the definitions of the active chars like <, >, |, etc. % Likewise with the other plain tex font commands. %\let\tt=\indexdummyfont % \let\b=\indexdummyfont \let\i=\indexdummyfont \let\r=\indexdummyfont \let\sc=\indexdummyfont \let\t=\indexdummyfont % \let\TeX=\indexdummytex \let\acronym=\indexdummyfont \let\cite=\indexdummyfont \let\code=\indexdummyfont \let\command=\indexdummyfont \let\dfn=\indexdummyfont \let\dots=\indexdummydots \let\emph=\indexdummyfont \let\env=\indexdummyfont \let\file=\indexdummyfont \let\kbd=\indexdummyfont \let\key=\indexdummyfont \let\math=\indexdummyfont \let\option=\indexdummyfont \let\samp=\indexdummyfont \let\strong=\indexdummyfont \let\uref=\indexdummyfont \let\url=\indexdummyfont \let\var=\indexdummyfont \let\w=\indexdummyfont } % To define \realbackslash, we must make \ not be an escape. % We must first make another character (@) an escape % so we do not become unable to do a definition. {\catcode`\@=0 \catcode`\\=\other @gdef@realbackslash{\}} \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? % For \ifx comparisons. \def\emptymacro{\empty} % Most index entries go through here, but \dosubind is the general case. % \def\doind#1#2{\dosubind{#1}{#2}\empty} % Workhorse for all \fooindexes. % #1 is name of index, #2 is stuff to put there, #3 is subentry -- % \empty if called from \doind, as we usually are. The main exception % is with defuns, which call us directly. % \def\dosubind#1#2#3{% % Put the index entry in the margin if desired. \ifx\SETmarginindex\relax\else \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% \fi {% \count255=\lastpenalty {% \indexdummies % Must do this here, since \bf, etc expand at this stage \escapechar=`\\ {% \let\folio = 0% We will expand all macros now EXCEPT \folio. \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now % so it will be output as is; and it will print as backslash. % \def\thirdarg{#3}% % % If third arg is present, precede it with space in sort key. \ifx\thirdarg\emptymacro \let\subentry = \empty \else \def\subentry{ #3}% \fi % % First process the index entry with all font commands turned % off to get the string to sort by. {\indexnofonts \xdef\indexsorttmp{#2\subentry}}% % % Now the real index entry with the fonts. \toks0 = {#2}% % % If the third (subentry) arg is present, add it to the index % line to write. \ifx\thirdarg\emptymacro \else \toks0 = \expandafter{\the\toks0{#3}}% \fi % % Set up the complete index entry, with both the sort key and % the original text, including any font commands. We write % three arguments to \entry to the .?? file (four in the % subentry case), texindex reduces to two when writing the .??s % sorted result. \edef\temp{% \write\csname#1indfile\endcsname{% \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% }% % % If a skip is the last thing on the list now, preserve it % by backing up by \lastskip, doing the \write, then inserting % the skip again. Otherwise, the whatsit generated by the % \write will make \lastskip zero. The result is that sequences % like this: % @end defun % @tindex whatever % @defun ... % will have extra space inserted, because the \medbreak in the % start of the @defun won't see the skip inserted by the @end of % the previous defun. % % But don't do any of this if we're not in vertical mode. We % don't want to do a \vskip and prematurely end a paragraph. % % Avoid page breaks due to these extra skips, too. % \iflinks \ifvmode \skip0 = \lastskip \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi \fi % \temp % do the write % % \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi \fi }% }% \penalty\count255 }% } % The index entry written in the file actually looks like % \entry {sortstring}{page}{topic} % or % \entry {sortstring}{page}{topic}{subtopic} % The texindex program reads in these files and writes files % containing these kinds of lines: % \initial {c} % before the first topic whose initial is c % \entry {topic}{pagelist} % for a topic that is used without subtopics % \primary {topic} % for the beginning of a topic that is used with subtopics % \secondary {subtopic}{pagelist} % for each subtopic. % Define the user-accessible indexing commands % @findex, @vindex, @kindex, @cindex. \def\findex {\fnindex} \def\kindex {\kyindex} \def\cindex {\cpindex} \def\vindex {\vrindex} \def\tindex {\tpindex} \def\pindex {\pgindex} \def\cindexsub {\begingroup\obeylines\cindexsub} {\obeylines % \gdef\cindexsub "#1" #2^^M{\endgroup % \dosubind{cp}{#2}{#1}}} % Define the macros used in formatting output of the sorted index material. % @printindex causes a particular index (the ??s file) to get printed. % It does not print any chapter heading (usually an @unnumbered). % \def\printindex{\parsearg\doprintindex} \def\doprintindex#1{\begingroup \dobreak \chapheadingskip{10000}% % \smallfonts \rm \tolerance = 9500 \indexbreaks % % See if the index file exists and is nonempty. % Change catcode of @ here so that if the index file contains % \initial {@} % as its first line, TeX doesn't complain about mismatched braces % (because it thinks @} is a control sequence). \catcode`\@ = 11 \openin 1 \jobname.#1s \ifeof 1 % \enddoublecolumns gets confused if there is no text in the index, % and it loses the chapter title and the aux file entries for the % index. The easiest way to prevent this problem is to make sure % there is some text. \putwordIndexNonexistent \else % % If the index file exists but is empty, then \openin leaves \ifeof % false. We have to make TeX try to read something from the file, so % it can discover if there is anything in it. \read 1 to \temp \ifeof 1 \putwordIndexIsEmpty \else % Index files are almost Texinfo source, but we use \ as the escape % character. It would be better to use @, but that's too big a change % to make right now. \def\indexbackslash{\rawbackslashxx}% \catcode`\\ = 0 \escapechar = `\\ \begindoublecolumns \input \jobname.#1s \enddoublecolumns \fi \fi \closein 1 \endgroup} % These macros are used by the sorted index file itself. % Change them to control the appearance of the index. \def\initial#1{{% % Some minor font changes for the special characters. \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt % % Remove any glue we may have, we'll be inserting our own. \removelastskip % % We like breaks before the index initials, so insert a bonus. \penalty -300 % % Typeset the initial. Making this add up to a whole number of % baselineskips increases the chance of the dots lining up from column % to column. It still won't often be perfect, because of the stretch % we need before each entry, but it's better. % % No shrink because it confuses \balancecolumns. \vskip 1.67\baselineskip plus .5\baselineskip \leftline{\secbf #1}% \vskip .33\baselineskip plus .1\baselineskip % % Do our best not to break after the initial. \nobreak }} % This typesets a paragraph consisting of #1, dot leaders, and then #2 % flush to the right margin. It is used for index and table of contents % entries. The paragraph is indented by \leftskip. % \def\entry#1#2{\begingroup % % Start a new paragraph if necessary, so our assignments below can't % affect previous text. \par % % Do not fill out the last line with white space. \parfillskip = 0in % % No extra space above this paragraph. \parskip = 0in % % Do not prefer a separate line ending with a hyphen to fewer lines. \finalhyphendemerits = 0 % % \hangindent is only relevant when the entry text and page number % don't both fit on one line. In that case, bob suggests starting the % dots pretty far over on the line. Unfortunately, a large % indentation looks wrong when the entry text itself is broken across % lines. So we use a small indentation and put up with long leaders. % % \hangafter is reset to 1 (which is the value we want) at the start % of each paragraph, so we need not do anything with that. \hangindent = 2em % % When the entry text needs to be broken, just fill out the first line % with blank space. \rightskip = 0pt plus1fil % % A bit of stretch before each entry for the benefit of balancing columns. \vskip 0pt plus1pt % % Start a ``paragraph'' for the index entry so the line breaking % parameters we've set above will have an effect. \noindent % % Insert the text of the index entry. TeX will do line-breaking on it. #1% % The following is kludged to not output a line of dots in the index if % there are no page numbers. The next person who breaks this will be % cursed by a Unix daemon. \def\tempa{{\rm }}% \def\tempb{#2}% \edef\tempc{\tempa}% \edef\tempd{\tempb}% \ifx\tempc\tempd\ \else% % % If we must, put the page number on a line of its own, and fill out % this line with blank space. (The \hfil is overwhelmed with the % fill leaders glue in \indexdotfill if the page number does fit.) \hfil\penalty50 \null\nobreak\indexdotfill % Have leaders before the page number. % % The `\ ' here is removed by the implicit \unskip that TeX does as % part of (the primitive) \par. Without it, a spurious underfull % \hbox ensues. \ifpdf \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. \else \ #2% The page number ends the paragraph. \fi \fi% \par \endgroup} % Like \dotfill except takes at least 1 em. \def\indexdotfill{\cleaders \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill} \def\primary #1{\line{#1\hfil}} \newskip\secondaryindent \secondaryindent=0.5cm \def\secondary#1#2{{% \parfillskip=0in \parskip=0in \hangindent=1in \hangafter=1 \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill \ifpdf \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. \else #2 \fi \par }} % Define two-column mode, which we use to typeset indexes. % Adapted from the TeXbook, page 416, which is to say, % the manmac.tex format used to print the TeXbook itself. \catcode`\@=11 \newbox\partialpage \newdimen\doublecolumnhsize \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns % Grab any single-column material above us. \output = {% % % Here is a possibility not foreseen in manmac: if we accumulate a % whole lot of material, we might end up calling this \output % routine twice in a row (see the doublecol-lose test, which is % essentially a couple of indexes with @setchapternewpage off). In % that case we just ship out what is in \partialpage with the normal % output routine. Generally, \partialpage will be empty when this % runs and this will be a no-op. See the indexspread.tex test case. \ifvoid\partialpage \else \onepageout{\pagecontents\partialpage}% \fi % \global\setbox\partialpage = \vbox{% % Unvbox the main output page. \unvbox\PAGE \kern-\topskip \kern\baselineskip }% }% \eject % run that output routine to set \partialpage % % Use the double-column output routine for subsequent pages. \output = {\doublecolumnout}% % % Change the page size parameters. We could do this once outside this % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 % format, but then we repeat the same computation. Repeating a couple % of assignments once per index is clearly meaningless for the % execution time, so we may as well do it in one place. % % First we halve the line length, less a little for the gutter between % the columns. We compute the gutter based on the line length, so it % changes automatically with the paper format. The magic constant % below is chosen so that the gutter has the same value (well, +-<1pt) % as it did when we hard-coded it. % % We put the result in a separate register, \doublecolumhsize, so we % can restore it in \pagesofar, after \hsize itself has (potentially) % been clobbered. % \doublecolumnhsize = \hsize \advance\doublecolumnhsize by -.04154\hsize \divide\doublecolumnhsize by 2 \hsize = \doublecolumnhsize % % Double the \vsize as well. (We don't need a separate register here, % since nobody clobbers \vsize.) \vsize = 2\vsize } % The double-column output routine for all double-column pages except % the last. % \def\doublecolumnout{% \splittopskip=\topskip \splitmaxdepth=\maxdepth % Get the available space for the double columns -- the normal % (undoubled) page height minus any material left over from the % previous page. \dimen@ = \vsize \divide\dimen@ by 2 \advance\dimen@ by -\ht\partialpage % % box0 will be the left-hand column, box2 the right. \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ \onepageout\pagesofar \unvbox255 \penalty\outputpenalty } % % Re-output the contents of the output page -- any previous material, % followed by the two boxes we just split, in box0 and box2. \def\pagesofar{% \unvbox\partialpage % \hsize = \doublecolumnhsize \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}% } % % All done with double columns. \def\enddoublecolumns{% \output = {% % Split the last of the double-column material. Leave it on the % current page, no automatic page break. \balancecolumns % % If we end up splitting too much material for the current page, % though, there will be another page break right after this \output % invocation ends. Having called \balancecolumns once, we do not % want to call it again. Therefore, reset \output to its normal % definition right away. (We hope \balancecolumns will never be % called on to balance too much material, but if it is, this makes % the output somewhat more palatable.) \global\output = {\onepageout{\pagecontents\PAGE}}% }% \eject \endgroup % started in \begindoublecolumns % % \pagegoal was set to the doubled \vsize above, since we restarted % the current page. We're now back to normal single-column % typesetting, so reset \pagegoal to the normal \vsize (after the % \endgroup where \vsize got restored). \pagegoal = \vsize } % % Called at the end of the double column material. \def\balancecolumns{% \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. \dimen@ = \ht0 \advance\dimen@ by \topskip \advance\dimen@ by-\baselineskip \divide\dimen@ by 2 % target to split to %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% \splittopskip = \topskip % Loop until we get a decent breakpoint. {% \vbadness = 10000 \loop \global\setbox3 = \copy0 \global\setbox1 = \vsplit3 to \dimen@ \ifdim\ht3>\dimen@ \global\advance\dimen@ by 1pt \repeat }% %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% \setbox0=\vbox to\dimen@{\unvbox1}% \setbox2=\vbox to\dimen@{\unvbox3}% % \pagesofar } \catcode`\@ = \other \message{sectioning,} % Chapters, sections, etc. \newcount\chapno \newcount\secno \secno=0 \newcount\subsecno \subsecno=0 \newcount\subsubsecno \subsubsecno=0 % This counter is funny since it counts through charcodes of letters A, B, ... \newcount\appendixno \appendixno = `\@ % \def\appendixletter{\char\the\appendixno} % We do the following for the sake of pdftex, which needs the actual % letter in the expansion, not just typeset. \def\appendixletter{% \ifnum\appendixno=`A A% \else\ifnum\appendixno=`B B% \else\ifnum\appendixno=`C C% \else\ifnum\appendixno=`D D% \else\ifnum\appendixno=`E E% \else\ifnum\appendixno=`F F% \else\ifnum\appendixno=`G G% \else\ifnum\appendixno=`H H% \else\ifnum\appendixno=`I I% \else\ifnum\appendixno=`J J% \else\ifnum\appendixno=`K K% \else\ifnum\appendixno=`L L% \else\ifnum\appendixno=`M M% \else\ifnum\appendixno=`N N% \else\ifnum\appendixno=`O O% \else\ifnum\appendixno=`P P% \else\ifnum\appendixno=`Q Q% \else\ifnum\appendixno=`R R% \else\ifnum\appendixno=`S S% \else\ifnum\appendixno=`T T% \else\ifnum\appendixno=`U U% \else\ifnum\appendixno=`V V% \else\ifnum\appendixno=`W W% \else\ifnum\appendixno=`X X% \else\ifnum\appendixno=`Y Y% \else\ifnum\appendixno=`Z Z% % The \the is necessary, despite appearances, because \appendixletter is % expanded while writing the .toc file. \char\appendixno is not % expandable, thus it is written literally, thus all appendixes come out % with the same letter (or @) in the toc without it. \else\char\the\appendixno \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} % Each @chapter defines this as the name of the chapter. % page headings and footings can use it. @section does likewise. \def\thischapter{} \def\thissection{} \newcount\absseclevel % used to calculate proper heading level \newcount\secbase\secbase=0 % @raise/lowersections modify this count % @raisesections: treat @section as chapter, @subsection as section, etc. \def\raisesections{\global\advance\secbase by -1} \let\up=\raisesections % original BFox name % @lowersections: treat @chapter as section, @section as subsection, etc. \def\lowersections{\global\advance\secbase by 1} \let\down=\lowersections % original BFox name % Choose a numbered-heading macro % #1 is heading level if unmodified by @raisesections or @lowersections % #2 is text for heading \def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 \ifcase\absseclevel \chapterzzz{#2} \or \seczzz{#2} \or \numberedsubseczzz{#2} \or \numberedsubsubseczzz{#2} \else \ifnum \absseclevel<0 \chapterzzz{#2} \else \numberedsubsubseczzz{#2} \fi \fi } % like \numhead, but chooses appendix heading levels \def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 \ifcase\absseclevel \appendixzzz{#2} \or \appendixsectionzzz{#2} \or \appendixsubseczzz{#2} \or \appendixsubsubseczzz{#2} \else \ifnum \absseclevel<0 \appendixzzz{#2} \else \appendixsubsubseczzz{#2} \fi \fi } % like \numhead, but chooses numberless heading levels \def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 \ifcase\absseclevel \unnumberedzzz{#2} \or \unnumberedseczzz{#2} \or \unnumberedsubseczzz{#2} \or \unnumberedsubsubseczzz{#2} \else \ifnum \absseclevel<0 \unnumberedzzz{#2} \else \unnumberedsubsubseczzz{#2} \fi \fi } % @chapter, @appendix, @unnumbered. \def\thischaptername{No Chapter Title} \outer\def\chapter{\parsearg\chapteryyy} \def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz \def\chapterzzz #1{% \secno=0 \subsecno=0 \subsubsecno=0 \global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}% \chapmacro {#1}{\the\chapno}% \gdef\thissection{#1}% \gdef\thischaptername{#1}% % We don't substitute the actual chapter name into \thischapter % because we don't want its macros evaluated now. \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% {\the\chapno}}}% \temp \donoderef \global\let\section = \numberedsec \global\let\subsection = \numberedsubsec \global\let\subsubsection = \numberedsubsubsec } \outer\def\appendix{\parsearg\appendixyyy} \def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz \def\appendixzzz #1{% \secno=0 \subsecno=0 \subsubsecno=0 \global\advance \appendixno by 1 \message{\putwordAppendix\space \appendixletter}% \chapmacro {#1}{\putwordAppendix{} \appendixletter}% \gdef\thissection{#1}% \gdef\thischaptername{#1}% \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash appendixentry{\the\toks0}% {\appendixletter}}}% \temp \appendixnoderef \global\let\section = \appendixsec \global\let\subsection = \appendixsubsec \global\let\subsubsection = \appendixsubsubsec } % @centerchap is like @unnumbered, but the heading is centered. \outer\def\centerchap{\parsearg\centerchapyyy} \def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}} % @top is like @unnumbered. \outer\def\top{\parsearg\unnumberedyyy} \outer\def\unnumbered{\parsearg\unnumberedyyy} \def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz \def\unnumberedzzz #1{% \secno=0 \subsecno=0 \subsubsecno=0 % % This used to be simply \message{#1}, but TeX fully expands the % argument to \message. Therefore, if #1 contained @-commands, TeX % expanded them. For example, in `@unnumbered The @cite{Book}', TeX % expanded @cite (which turns out to cause errors because \cite is meant % to be executed, not expanded). % % Anyway, we don't want the fully-expanded definition of @cite to appear % as a result of the \message, we just want `@cite' itself. We use % \the<toks register> to achieve this: TeX expands \the<toks> only once, % simply yielding the contents of <toks register>. (We also do this for % the toc entries.) \toks0 = {#1}\message{(\the\toks0)}% % \unnumbchapmacro {#1}% \gdef\thischapter{#1}\gdef\thissection{#1}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}% \temp \unnumbnoderef \global\let\section = \unnumberedsec \global\let\subsection = \unnumberedsubsec \global\let\subsubsection = \unnumberedsubsubsec } % Sections. \outer\def\numberedsec{\parsearg\secyyy} \def\secyyy #1{\numhead1{#1}} % normally calls seczzz \def\seczzz #1{% \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% {\the\chapno}{\the\secno}}}% \temp \donoderef \nobreak } \outer\def\appendixsection{\parsearg\appendixsecyyy} \outer\def\appendixsec{\parsearg\appendixsecyyy} \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz \def\appendixsectionzzz #1{% \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% {\appendixletter}{\the\secno}}}% \temp \appendixnoderef \nobreak } \outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} \def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz \def\unnumberedseczzz #1{% \plainsecheading {#1}\gdef\thissection{#1}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry% {\the\toks0}{\the\chapno}}}% \temp \unnumbnoderef \nobreak } % Subsections. \outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} \def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz \def\numberedsubseczzz #1{% \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% {\the\chapno}{\the\secno}{\the\subsecno}}}% \temp \donoderef \nobreak } \outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} \def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz \def\appendixsubseczzz #1{% \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% {\appendixletter}{\the\secno}{\the\subsecno}}}% \temp \appendixnoderef \nobreak } \outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz \def\unnumberedsubseczzz #1{% \plainsubsecheading {#1}\gdef\thissection{#1}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry% {\the\toks0}{\the\chapno}{\the\secno}}}% \temp \unnumbnoderef \nobreak } % Subsubsections. \outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} \def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz \def\numberedsubsubseczzz #1{% \gdef\thissection{#1}\global\advance \subsubsecno by 1 % \subsubsecheading {#1} {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% \temp \donoderef \nobreak } \outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} \def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz \def\appendixsubsubseczzz #1{% \gdef\thissection{#1}\global\advance \subsubsecno by 1 % \subsubsecheading {#1} {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% \temp \appendixnoderef \nobreak } \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz \def\unnumberedsubsubseczzz #1{% \plainsubsubsecheading {#1}\gdef\thissection{#1}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry% {\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}}}% \temp \unnumbnoderef \nobreak } % These are variants which are not "outer", so they can appear in @ifinfo. % Actually, they should now be obsolete; ordinary section commands should work. \def\infotop{\parsearg\unnumberedzzz} \def\infounnumbered{\parsearg\unnumberedzzz} \def\infounnumberedsec{\parsearg\unnumberedseczzz} \def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} \def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} \def\infoappendix{\parsearg\appendixzzz} \def\infoappendixsec{\parsearg\appendixseczzz} \def\infoappendixsubsec{\parsearg\appendixsubseczzz} \def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} \def\infochapter{\parsearg\chapterzzz} \def\infosection{\parsearg\sectionzzz} \def\infosubsection{\parsearg\subsectionzzz} \def\infosubsubsection{\parsearg\subsubsectionzzz} % These macros control what the section commands do, according % to what kind of chapter we are in (ordinary, appendix, or unnumbered). % Define them by default for a numbered chapter. \global\let\section = \numberedsec \global\let\subsection = \numberedsubsec \global\let\subsubsection = \numberedsubsubsec % Define @majorheading, @heading and @subheading % NOTE on use of \vbox for chapter headings, section headings, and such: % 1) We use \vbox rather than the earlier \line to permit % overlong headings to fold. % 2) \hyphenpenalty is set to 10000 because hyphenation in a % heading is obnoxious; this forbids it. % 3) Likewise, headings look best if no \parindent is used, and % if justification is not attempted. Hence \raggedright. \def\majorheading{\parsearg\majorheadingzzz} \def\majorheadingzzz #1{% {\advance\chapheadingskip by 10pt \chapbreak }% {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright \rm #1\hfill}}\bigskip \par\penalty 200} \def\chapheading{\parsearg\chapheadingzzz} \def\chapheadingzzz #1{\chapbreak % {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright \rm #1\hfill}}\bigskip \par\penalty 200} % @heading, @subheading, @subsubheading. \def\heading{\parsearg\plainsecheading} \def\subheading{\parsearg\plainsubsecheading} \def\subsubheading{\parsearg\plainsubsubsecheading} % These macros generate a chapter, section, etc. heading only % (including whitespace, linebreaking, etc. around it), % given all the information in convenient, parsed form. %%% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} \def\setchapterstyle #1 {\csname CHAPF#1\endcsname} %%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) \newskip\chapheadingskip \def\chapbreak{\dobreak \chapheadingskip {-4000}} \def\chappager{\par\vfill\supereject} \def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} \def\CHAPPAGoff{% \global\let\contentsalignmacro = \chappager \global\let\pchapsepmacro=\chapbreak \global\let\pagealignmacro=\chappager} \def\CHAPPAGon{% \global\let\contentsalignmacro = \chappager \global\let\pchapsepmacro=\chappager \global\let\pagealignmacro=\chappager \global\def\HEADINGSon{\HEADINGSsingle}} \def\CHAPPAGodd{ \global\let\contentsalignmacro = \chapoddpage \global\let\pchapsepmacro=\chapoddpage \global\let\pagealignmacro=\chapoddpage \global\def\HEADINGSon{\HEADINGSdouble}} \CHAPPAGon \def\CHAPFplain{ \global\let\chapmacro=\chfplain \global\let\unnumbchapmacro=\unnchfplain \global\let\centerchapmacro=\centerchfplain} % Plain chapter opening. % #1 is the text, #2 the chapter number or empty if unnumbered. \def\chfplain#1#2{% \pchapsepmacro {% \chapfonts \rm \def\chapnum{#2}% \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}% \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright \hangindent = \wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title \nobreak } % Plain opening for unnumbered. \def\unnchfplain#1{\chfplain{#1}{}} % @centerchap -- centered and unnumbered. \let\centerparametersmaybe = \relax \def\centerchfplain#1{{% \def\centerparametersmaybe{% \advance\rightskip by 3\rightskip \leftskip = \rightskip \parfillskip = 0pt }% \chfplain{#1}{}% }} \CHAPFplain % The default \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright \rm #1\hfill}}\bigskip \par\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt \hfill {\rm #1}\hfill}}\bigskip \par\nobreak } \def\CHAPFopen{ \global\let\chapmacro=\chfopen \global\let\unnumbchapmacro=\unnchfopen \global\let\centerchapmacro=\centerchfopen} % Section titles. \newskip\secheadingskip \def\secheadingbreak{\dobreak \secheadingskip {-1000}} \def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}} \def\plainsecheading#1{\sectionheading{sec}{}{#1}} % Subsection titles. \newskip \subsecheadingskip \def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} \def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}} \def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}} % Subsubsection titles. \let\subsubsecheadingskip = \subsecheadingskip \let\subsubsecheadingbreak = \subsecheadingbreak \def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}} \def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}} % Print any size section title. % % #1 is the section type (sec/subsec/subsubsec), #2 is the section % number (maybe empty), #3 the text. \def\sectionheading#1#2#3{% {% \expandafter\advance\csname #1headingskip\endcsname by \parskip \csname #1headingbreak\endcsname }% {% % Switch to the right set of fonts. \csname #1fonts\endcsname \rm % % Only insert the separating space if we have a section number. \def\secnum{#2}% \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}% % \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright \hangindent = \wd0 % zero if no section number \unhbox0 #3}% }% \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak } \message{toc,} % Table of contents. \newwrite\tocfile % Write an entry to the toc file, opening it if necessary. % Called from @chapter, etc. We supply {\folio} at the end of the % argument, which will end up as the last argument to the \...entry macro. % % We open the .toc file here instead of at @setfilename or any other % fixed time so that @contents can be put in the document anywhere. % \newif\iftocfileopened \def\writetocentry#1{% \iftocfileopened\else \immediate\openout\tocfile = \jobname.toc \global\tocfileopenedtrue \fi \iflinks \write\tocfile{#1{\folio}}\fi % % Tell \shipout to create a page destination if we're doing pdf, which % will be the target of the links in the table of contents. We can't % just do it on every page because the title pages are numbered 1 and % 2 (the page numbers aren't printed), and so are the first two pages % of the document. Thus, we'd have two destinations named `1', and % two named `2'. \ifpdf \pdfmakepagedesttrue \fi } \newskip\contentsrightmargin \contentsrightmargin=1in \newcount\savepageno \newcount\lastnegativepageno \lastnegativepageno = -1 % Finish up the main text and prepare to read what we've written % to \tocfile. % \def\startcontents#1{% % If @setchapternewpage on, and @headings double, the contents should % start on an odd page, unlike chapters. Thus, we maintain % \contentsalignmacro in parallel with \pagealignmacro. % From: Torbjorn Granlund <tege@matematik.su.se> \contentsalignmacro \immediate\closeout\tocfile % % Don't need to put `Contents' or `Short Contents' in the headline. % It is abundantly clear what they are. \unnumbchapmacro{#1}\def\thischapter{}% \savepageno = \pageno \begingroup % Set up to handle contents files properly. \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 % We can't do this, because then an actual ^ in a section % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi \raggedbottom % Worry more about breakpoints than the bottom. \advance\hsize by -\contentsrightmargin % Don't use the full line length. % % Roman numerals for page numbers. \ifnum \pageno>0 \pageno = \lastnegativepageno \fi } % Normal (long) toc. \def\contents{% \startcontents{\putwordTOC}% \openin 1 \jobname.toc \ifeof 1 \else \closein 1 \input \jobname.toc \fi \vfill \eject \contentsalignmacro % in case @setchapternewpage odd is in effect \pdfmakeoutlines \endgroup \lastnegativepageno = \pageno \pageno = \savepageno } % And just the chapters. \def\summarycontents{% \startcontents{\putwordShortTOC}% % \let\chapentry = \shortchapentry \let\appendixentry = \shortappendixentry \let\unnumbchapentry = \shortunnumberedentry % We want a true roman here for the page numbers. \secfonts \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl \rm \hyphenpenalty = 10000 \advance\baselineskip by 1pt % Open it up a little. \def\secentry ##1##2##3##4{} \def\unnumbsecentry ##1##2##3{} \def\subsecentry ##1##2##3##4##5{} \def\unnumbsubsecentry ##1##2##3##4{} \def\subsubsecentry ##1##2##3##4##5##6{} \def\unnumbsubsubsecentry ##1##2##3##4##5{} \openin 1 \jobname.toc \ifeof 1 \else \closein 1 \input \jobname.toc \fi \vfill \eject \contentsalignmacro % in case @setchapternewpage odd is in effect \endgroup \lastnegativepageno = \pageno \pageno = \savepageno } \let\shortcontents = \summarycontents \ifpdf \pdfcatalog{/PageMode /UseOutlines}% \fi % These macros generate individual entries in the table of contents. % The first argument is the chapter or section name. % The last argument is the page number. % The arguments in between are the chapter number, section number, ... % Chapters, in the main contents. \def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} % % Chapters, in the short toc. % See comments in \dochapentry re vbox and related settings. \def\shortchapentry#1#2#3{% \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}% } % Appendices, in the main contents. \def\appendixentry#1#2#3{\dochapentry{\putwordAppendix{} #2\labelspace#1}{#3}} % % Appendices, in the short toc. \let\shortappendixentry = \shortchapentry % Typeset the label for a chapter or appendix for the short contents. % The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter. % We could simplify the code here by writing out an \appendixentry % command in the toc file for appendices, instead of using \chapentry % for both, but it doesn't seem worth it. % \newdimen\shortappendixwidth % \def\shortchaplabel#1{% % This space should be enough, since a single number is .5em, and the % widest letter (M) is 1em, at least in the Computer Modern fonts. % But use \hss just in case. % (This space doesn't include the extra space that gets added after % the label; that gets put in by \shortchapentry above.) \dimen0 = 1em \hbox to \dimen0{#1\hss}% } % Unnumbered chapters. \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} \def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}} % Sections. \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} \def\unnumbsecentry#1#2#3{\dosecentry{#1}{#3}} % Subsections. \def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} \def\unnumbsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} % And subsubsections. \def\subsubsecentry#1#2#3#4#5#6{% \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} \def\unnumbsubsubsecentry#1#2#3#4#5{\dosubsubsecentry{#1}{#5}} % This parameter controls the indentation of the various levels. \newdimen\tocindent \tocindent = 3pc % Now for the actual typesetting. In all these, #1 is the text and #2 is the % page number. % % If the toc has to be broken over pages, we want it to be at chapters % if at all possible; hence the \penalty. \def\dochapentry#1#2{% \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip \begingroup \chapentryfonts \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup \nobreak\vskip .25\baselineskip plus.1\baselineskip } \def\dosecentry#1#2{\begingroup \secentryfonts \leftskip=\tocindent \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsecentry#1#2{\begingroup \subsecentryfonts \leftskip=2\tocindent \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsubsecentry#1#2{\begingroup \subsubsecentryfonts \leftskip=3\tocindent \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} % Final typesetting of a toc entry; we use the same \entry macro as for % the index entries, but we want to suppress hyphenation here. (We % can't do that in the \entry macro, since index entries might consist % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) \def\tocentry#1#2{\begingroup \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks % Do not use \turnoffactive in these arguments. Since the toc is % typeset in cmr, characters such as _ would come out wrong; we % have to do the usual translation tricks. \entry{#1}{#2}% \endgroup} % Space between chapter (or whatever) number and the title. \def\labelspace{\hskip1em \relax} \def\dopageno#1{{\rm #1}} \def\doshortpageno#1{{\rm #1}} \def\chapentryfonts{\secfonts \rm} \def\secentryfonts{\textfonts} \let\subsecentryfonts = \textfonts \let\subsubsecentryfonts = \textfonts \message{environments,} % @foo ... @end foo. % @point{}, @result{}, @expansion{}, @print{}, @equiv{}. % % Since these characters are used in examples, it should be an even number of % \tt widths. Each \tt character is 1en, so two makes it 1em. % \def\point{$\star$} \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} % The @error{} command. % Adapted from the TeXbook's \boxit. % \newbox\errorbox % {\tentt \global\dimen0 = 3em}% Width of the box. \dimen2 = .55pt % Thickness of rules % The text. (`r' is open on the right, `e' somewhat less so on the left.) \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} % \global\setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. \advance\hsize by -2\dimen2 % Rules. \vbox{ \hrule height\dimen2 \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. \kern3pt\vrule width\dimen2}% Space to right. \hrule height\dimen2} \hfil} % \def\error{\leavevmode\lower.7ex\copy\errorbox} % @tex ... @end tex escapes into raw Tex temporarily. % One exception: @ is still an escape character, so that @end tex works. % But \@ or @@ will get a plain tex @ character. \def\tex{\begingroup \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie \catcode `\%=14 \catcode 43=12 % plus \catcode`\"=12 \catcode`\==12 \catcode`\|=12 \catcode`\<=12 \catcode`\>=12 \escapechar=`\\ % \let\b=\ptexb \let\bullet=\ptexbullet \let\c=\ptexc \let\,=\ptexcomma \let\.=\ptexdot \let\dots=\ptexdots \let\equiv=\ptexequiv \let\!=\ptexexclam \let\i=\ptexi \let\{=\ptexlbrace \let\+=\tabalign \let\}=\ptexrbrace \let\*=\ptexstar \let\t=\ptext % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% \def\@{@}% \let\Etex=\endgroup} % Define @lisp ... @end lisp. % @lisp does a \begingroup so it can rebind things, % including the definition of @end lisp (which normally is erroneous). % Amount to narrow the margins by for @lisp. \newskip\lispnarrowing \lispnarrowing=0.4in % This is the definition that ^^M gets inside @lisp, @example, and other % such environments. \null is better than a space, since it doesn't % have any width. \def\lisppar{\null\endgraf} % Make each space character in the input produce a normal interword % space in the output. Don't allow a line break at this space, as this % is used only in environments like @example, where each line of input % should produce a line of output anyway. % {\obeyspaces % \gdef\sepspaces{\obeyspaces\let =\tie}} % Define \obeyedspace to be our active space, whatever it is. This is % for use in \parsearg. {\sepspaces% \global\let\obeyedspace= } % This space is always present above and below environments. \newskip\envskipamount \envskipamount = 0pt % Make spacing and below environment symmetrical. We use \parskip here % to help in doing that, since in @example-like environments \parskip % is reset to zero; thus the \afterenvbreak inserts no space -- but the % start of the next paragraph will insert \parskip % \def\aboveenvbreak{{% \ifnum\lastpenalty < 10000 \advance\envskipamount by \parskip \endgraf \ifdim\lastskip<\envskipamount \removelastskip \penalty-50 \vskip\envskipamount \fi \fi }} \let\afterenvbreak = \aboveenvbreak % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. \let\nonarrowing=\relax % @cartouche ... @end cartouche: draw rectangle w/rounded corners around % environment contents. \font\circle=lcircle10 \newdimen\circthick \newdimen\cartouter\newdimen\cartinner \newskip\normbskip\newskip\normpskip\newskip\normlskip \circthick=\fontdimen8\circle % \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth \def\ctr{{\hskip 6pt\circle\char'010}} \def\cbl{{\circle\char'012\hskip -6pt}} \def\cbr{{\hskip 6pt\circle\char'011}} \def\carttop{\hbox to \cartouter{\hskip\lskip \ctl\leaders\hrule height\circthick\hfil\ctr \hskip\rskip}} \def\cartbot{\hbox to \cartouter{\hskip\lskip \cbl\leaders\hrule height\circthick\hfil\cbr \hskip\rskip}} % \newskip\lskip\newskip\rskip \long\def\cartouche{% \begingroup \lskip=\leftskip \rskip=\rightskip \leftskip=0pt\rightskip=0pt %we want these *outside*. \cartinner=\hsize \advance\cartinner by-\lskip \advance\cartinner by-\rskip \cartouter=\hsize \advance\cartouter by 18.4pt % allow for 3pt kerns on either % side, and for 6pt waste from % each corner char, and rule thickness \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip % Flag to tell @lisp, etc., not to narrow margin. \let\nonarrowing=\comment \vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt \carttop \hbox\bgroup \hskip\lskip \vrule\kern3pt \vbox\bgroup \hsize=\cartinner \kern3pt \begingroup \baselineskip=\normbskip \lineskip=\normlskip \parskip=\normpskip \vskip -\parskip \def\Ecartouche{% \endgroup \kern3pt \egroup \kern3pt\vrule \hskip\rskip \egroup \cartbot \egroup \endgroup }} % This macro is called at the beginning of all the @example variants, % inside a group. \def\nonfillstart{% \aboveenvbreak \inENV % This group ends at the end of the body \hfuzz = 12pt % Don't be fussy \sepspaces % Make spaces be word-separators rather than space tokens. \singlespace \let\par = \lisppar % don't ignore blank lines \obeylines % each line of input is a line of output \parskip = 0pt \parindent = 0pt \emergencystretch = 0pt % don't try to avoid overfull boxes % @cartouche defines \nonarrowing to inhibit narrowing % at next level down. \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing \exdentamount=\lispnarrowing \let\exdent=\nofillexdent \let\nonarrowing=\relax \fi } % Define the \E... control sequence only if we are inside the particular % environment, so the error checking in \end will work. % % To end an @example-like environment, we first end the paragraph (via % \afterenvbreak's vertical glue), and then the group. That way we keep % the zero \parskip that the environments set -- \parskip glue will be % inserted at the beginning of the next paragraph in the document, after % the environment. % \def\nonfillfinish{\afterenvbreak\endgroup} % @lisp: indented, narrowed, typewriter font. \def\lisp{\begingroup \nonfillstart \let\Elisp = \nonfillfinish \tt \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. \gobble % eat return } % @example: Same as @lisp. \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} % @small... is usually equivalent to the non-small (@smallbook % redefines). We must call \example (or whatever) last in the % definition, since it reads the return following the @example (or % whatever) command. % % This actually allows (for example) @end display inside an % @smalldisplay. Too bad, but makeinfo will catch the error anyway. % \def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display} \def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp} \def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format} \def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp} % Real @smallexample and @smalllisp (when @smallbook): use smaller fonts. % Originally contributed by Pavel@xerox. \def\smalllispx{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}% \def\Esmallexample{\nonfillfinish\endgroup}% \smallexamplefonts \lisp } % @display: same as @lisp except keep current font. % \def\display{\begingroup \nonfillstart \let\Edisplay = \nonfillfinish \gobble } % % @smalldisplay (when @smallbook): @display plus smaller fonts. % \def\smalldisplayx{\begingroup \def\Esmalldisplay{\nonfillfinish\endgroup}% \smallexamplefonts \rm \display } % @format: same as @display except don't narrow margins. % \def\format{\begingroup \let\nonarrowing = t \nonfillstart \let\Eformat = \nonfillfinish \gobble } % % @smallformat (when @smallbook): @format plus smaller fonts. % \def\smallformatx{\begingroup \def\Esmallformat{\nonfillfinish\endgroup}% \smallexamplefonts \rm \format } % @flushleft (same as @format). % \def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format} % @flushright. % \def\flushright{\begingroup \let\nonarrowing = t \nonfillstart \let\Eflushright = \nonfillfinish \advance\leftskip by 0pt plus 1fill \gobble } % @quotation does normal linebreaking (hence we can't use \nonfillstart) % and narrows the margins. % \def\quotation{% \begingroup\inENV %This group ends at the end of the @quotation body {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip \singlespace \parindent=0pt % We have retained a nonzero parskip for the environment, since we're % doing normal filling. So to avoid extra space below the environment... \def\Equotation{\parskip = 0pt \nonfillfinish}% % % @cartouche defines \nonarrowing to inhibit narrowing at next level down. \ifx\nonarrowing\relax \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing \exdentamount = \lispnarrowing \let\nonarrowing = \relax \fi } % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>} % If we want to allow any <char> as delimiter, % we need the curly braces so that makeinfo sees the @verb command, eg: % `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org % % [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. % % [Knuth] p. 344; only we need to do '@' too \def\dospecials{% \do\ \do\\\do\@\do\{\do\}\do\$\do\&% \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~} % % [Knuth] p. 380 \def\uncatcodespecials{% \def\do##1{\catcode`##1=12}\dospecials} % % [Knuth] pp. 380,381,391 % Disable Spanish ligatures ?` and !` of \tt font \begingroup \catcode`\`=\active\gdef`{\relax\lq} \endgroup % % Setup for the @verb command. % % Eight spaces for a tab \begingroup \catcode`\^^I=\active \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} \endgroup % \def\setupverb{% \tt % easiest (and conventionally used) font for verbatim \def\par{\leavevmode\endgraf}% \catcode`\`=\active \tabeightspaces % Respect line breaks, % print special symbols as themselves, and % make each space count % must do in this order: \obeylines \uncatcodespecials \sepspaces } % Setup for the @verbatim environment % % Real tab expansion \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount % \def\starttabbox{\setbox0=\hbox\bgroup} \begingroup \catcode`\^^I=\active \gdef\tabexpand{% \catcode`\^^I=\active \def^^I{\leavevmode\egroup \dimen0=\wd0 % the width so far, or since the previous tab \divide\dimen0 by\tabw \multiply\dimen0 by\tabw % compute previous multiple of \tabw \advance\dimen0 by\tabw % advance to next multiple of \tabw \wd0=\dimen0 \box0 \starttabbox }% } \endgroup \def\setupverbatim{% % Easiest (and conventionally used) font for verbatim \tt \def\par{\leavevmode\egroup\box0\endgraf}% \catcode`\`=\active \tabexpand % Respect line breaks, % print special symbols as themselves, and % make each space count % must do in this order: \obeylines \uncatcodespecials \sepspaces \everypar{\starttabbox}% } % Do the @verb magic: verbatim text is quoted by unique % delimiter characters. Before first delimiter expect a % right brace, after last delimiter expect closing brace: % % \def\doverb'{'<char>#1<char>'}'{#1} % % [Knuth] p. 382; only eat outer {} \begingroup \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12 \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] \endgroup % \def\verb{\begingroup\setupverb\doverb} % % % Do the @verbatim magic: define the macro \doverbatim so that % the (first) argument ends when '@end verbatim' is reached, ie: % % \def\doverbatim#1@end verbatim{#1} % % For Texinfo it's a lot easier than for LaTeX, % because texinfo's \verbatim doesn't stop at '\end{verbatim}': % we need not redefine '\', '{' and '}' % % Inspired by LaTeX's verbatim command set [latex.ltx] %% Include LaTeX hack for completeness -- never know %% \begingroup %% \catcode`|=0 \catcode`[=1 %% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active %% \catcode`\\=12|gdef|doverbatim#1@end verbatim[ %% #1|endgroup|def|Everbatim[]|end[verbatim]] %% |endgroup \begingroup \catcode`\ =\active \gdef\doverbatim#1@end verbatim{#1\end{verbatim}} \endgroup % \def\verbatim{% \def\Everbatim{\nonfillfinish\endgroup}% \begingroup \nonfillstart \advance\leftskip by -\defbodyindent \begingroup\setupverbatim\doverbatim } % @verbatiminclude FILE - insert text of file in verbatim environment. % % Allow normal characters that we make active in the argument (a file name). \def\verbatiminclude{% \begingroup \catcode`\\=12 \catcode`~=12 \catcode`^=12 \catcode`_=12 \catcode`|=12 \catcode`<=12 \catcode`>=12 \catcode`+=12 \parsearg\doverbatiminclude } \def\setupverbatiminclude{% \begingroup \nonfillstart \advance\leftskip by -\defbodyindent \begingroup\setupverbatim } % \def\doverbatiminclude#1{% % Restore active chars for included file. \endgroup \begingroup \def\thisfile{#1}% \expandafter\expandafter\setupverbatiminclude\input\thisfile \endgroup\nonfillfinish\endgroup } % @copying ... @end copying. % Save the text away for @insertcopying later. % \newbox\copyingbox % \def\copying{\begingroup \parindent = 0pt % looks wrong on title page \def\Ecopying{\egroup\endgroup}% \global\setbox\copyingbox = \vbox\bgroup } % @insertcopying. % \def\insertcopying{\unvcopy\copyingbox} \message{defuns,} % @defun etc. % Allow user to change definition object font (\df) internally \def\setdeffont #1 {\csname DEF#1\endcsname} \newskip\defbodyindent \defbodyindent=.4in \newskip\defargsindent \defargsindent=50pt \newskip\deftypemargin \deftypemargin=12pt \newskip\deflastargmargin \deflastargmargin=18pt \newcount\parencount % define \functionparens, which makes ( and ) and & do special things. % \functionparens affects the group it is contained in. \def\activeparens{% \catcode`\(=\active \catcode`\)=\active \catcode`\&=\active \catcode`\[=\active \catcode`\]=\active} % Make control sequences which act like normal parenthesis chars. \let\lparen = ( \let\rparen = ) {\activeparens % Now, smart parens don't turn on until &foo (see \amprm) % Be sure that we always have a definition for `(', etc. For example, % if the fn name has parens in it, \boldbrax will not be in effect yet, % so TeX would otherwise complain about undefined control sequence. \global\let(=\lparen \global\let)=\rparen \global\let[=\lbrack \global\let]=\rbrack \gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} % This is used to turn on special parens % but make & act ordinary (given that it's active). \gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr} % Definitions of (, ) and & used in args for functions. % This is the definition of ( outside of all parentheses. \gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested \global\advance\parencount by 1 } % % This is the definition of ( when already inside a level of parens. \gdef\opnested{\char`\(\global\advance\parencount by 1 } % \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. % also in that case restore the outer-level definition of (. \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi \global\advance \parencount by -1 } % If we encounter &foo, then turn on ()-hacking afterwards \gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } % \gdef\normalparens{\boldbrax\let&=\ampnr} } % End of definition inside \activeparens %% These parens (in \boldbrax) actually are a little bolder than the %% contained text. This is especially needed for [ and ] \def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } \def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } \let\ampnr = \& \def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}} % Active &'s sneak into the index arguments, so make sure it's defined. { \catcode`& = 13 \global\let& = \ampnr } % First, defname, which formats the header line itself. % #1 should be the function name. % #2 should be the type of definition, such as "Function". \def\defname #1#2{% % Get the values of \leftskip and \rightskip as they were % outside the @def... \dimen2=\leftskip \advance\dimen2 by -\defbodyindent \noindent \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations \parshape 2 0in \dimen0 \defargsindent \dimen1 % Now output arg 2 ("Function" or some such) % ending at \deftypemargin from the right margin, % but stuck inside a box of width 0 so it does not interfere with linebreaking {% Adjust \hsize to exclude the ambient margins, % so that \rightline will obey them. \advance \hsize by -\dimen2 \rlap{\rightline{{\rm #2}\hskip -1.25pc }}}% % Make all lines underfull and no complaints: \tolerance=10000 \hbadness=10000 \advance\leftskip by -\defbodyindent \exdentamount=\defbodyindent {\df #1}\enskip % Generate function name } % Common pieces to start any @def... % #1 is the \E... control sequence to end the definition (which we define). % #2 is the \...x control sequence (which our caller defines). % #3 is the control sequence to process the header, such as \defunheader. % \def\parsebodycommon#1#2#3{% \begingroup\inENV % If there are two @def commands in a row, we'll have a \nobreak, % which is there to keep the function description together with its % header. But if there's nothing but headers, we want to allow a % break after all. \ifnum\lastpenalty = 10000 \penalty0 \fi \medbreak % % Define the \E... end token that this defining construct specifies % so that it will exit this group. \def#1{\endgraf\endgroup\medbreak}% % \parindent=0in \advance\leftskip by \defbodyindent \exdentamount=\defbodyindent } % Process body of @defun, @deffn, @defmac, etc. % \def\defparsebody#1#2#3{% \parsebodycommon{#1}{#2}{#3}% \def#2{\begingroup\obeylines\activeparens\spacesplit#3}% \catcode61=\active % 61 is `=' \begingroup\obeylines\activeparens \spacesplit#3% } % #1, #2, #3 are the common arguments (see \defparsebody). % #4, delimited by the space, is the class name. % \def\defmethparsebody#1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% \begingroup\obeylines\activeparens \spacesplit{#3{#4}}% } % Used for @deftypemethod and @deftypeivar. % #1, #2, #3 are the common arguments (see \defparsebody). % #4, delimited by a space, is the class name. % #5 is the method's return type. % \def\deftypemethparsebody#1#2#3#4 #5 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% \begingroup\obeylines\activeparens \spacesplit{#3{#4}{#5}}% } % Used for @deftypeop. The change from \deftypemethparsebody is an % extra argument at the beginning which is the `category', instead of it % being the hardwired string `Method' or `Instance Variable'. We have % to account for this both in the \...x definition and in parsing the % input at hand. Thus also need a control sequence (passed as #5) for % the \E... definition to assign the category name to. % \def\deftypeopparsebody#1#2#3#4#5 #6 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 ##3 {% \def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}% \begingroup\obeylines\activeparens \spacesplit{#3{#5}{#6}}% } % For @defop. \def\defopparsebody #1#2#3#4#5 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% \begingroup\obeylines\activeparens \spacesplit{#3{#5}}% } % These parsing functions are similar to the preceding ones % except that they do not make parens into active characters. % These are used for "variables" since they have no arguments. % \def\defvarparsebody #1#2#3{% \parsebodycommon{#1}{#2}{#3}% \def#2{\begingroup\obeylines\spacesplit#3}% \catcode61=\active % \begingroup\obeylines \spacesplit#3% } % @defopvar. \def\defopvarparsebody #1#2#3#4#5 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\spacesplit{#3{##2}}}% \begingroup\obeylines \spacesplit{#3{#5}}% } \def\defvrparsebody#1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% \begingroup\obeylines \spacesplit{#3{#4}}% } % This loses on `@deftp {Data Type} {struct termios}' -- it thinks the % type is just `struct', because we lose the braces in `{struct % termios}' when \spacesplit reads its undelimited argument. Sigh. % \let\deftpparsebody=\defvrparsebody % % So, to get around this, we put \empty in with the type name. That % way, TeX won't find exactly `{...}' as an undelimited argument, and % won't strip off the braces. % \def\deftpparsebody #1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% \begingroup\obeylines \spacesplit{\parsetpheaderline{#3{#4}}}\empty } % Fine, but then we have to eventually remove the \empty *and* the % braces (if any). That's what this does. % \def\removeemptybraces\empty#1\relax{#1} % After \spacesplit has done its work, this is called -- #1 is the final % thing to call, #2 the type name (which starts with \empty), and #3 % (which might be empty) the arguments. % \def\parsetpheaderline#1#2#3{% #1{\removeemptybraces#2\relax}{#3}% }% % Split up #2 at the first space token. % call #1 with two arguments: % the first is all of #2 before the space token, % the second is all of #2 after that space token. % If #2 contains no space token, all of it is passed as the first arg % and the second is passed as empty. % {\obeylines \gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% \long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% \ifx\relax #3% #1{#2}{}\else #1{#2}{#3#4}\fi}} % Define @defun. % First, define the processing that is wanted for arguments of \defun % Use this to expand the args and terminate the paragraph they make up \def\defunargs#1{\functionparens \sl % Expand, preventing hyphenation at `-' chars. % Note that groups don't affect changes in \hyphenchar. % Set the font temporarily and use \font in case \setfont made \tensl a macro. {\tensl\hyphenchar\font=0}% #1% {\tensl\hyphenchar\font=45}% \ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% \interlinepenalty=10000 \advance\rightskip by 0pt plus 1fil \endgraf\nobreak\vskip -\parskip\nobreak } \def\deftypefunargs #1{% % Expand, preventing hyphenation at `-' chars. % Note that groups don't affect changes in \hyphenchar. % Use \boldbraxnoamp, not \functionparens, so that & is not special. \boldbraxnoamp \tclose{#1}% avoid \code because of side effects on active chars \interlinepenalty=10000 \advance\rightskip by 0pt plus 1fil \endgraf\nobreak\vskip -\parskip\nobreak } % Do complete processing of one @defun or @defunx line already parsed. % @deffn Command forward-char nchars \def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} \def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% \begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } % @defun == @deffn Function \def\defun{\defparsebody\Edefun\defunx\defunheader} \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index \begingroup\defname {#1}{\putwordDeffunc}% \defunargs {#2}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } % @deftypefun int foobar (int @var{foo}, float @var{bar}) \def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} % #1 is the data type. #2 is the name and args. \def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} % #1 is the data type, #2 the name, #3 the args. \def\deftypefunheaderx #1#2 #3\relax{% \doind {fn}{\code{#2}}% Make entry in function index \begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}% \deftypefunargs {#3}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } % @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} % \defheaderxcond#1\relax$.$ % puts #1 in @code, followed by a space, but does nothing if #1 is null. \def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi} % #1 is the classification. #2 is the data type. #3 is the name and args. \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} % #1 is the classification, #2 the data type, #3 the name, #4 the args. \def\deftypefnheaderx #1#2#3 #4\relax{% \doind {fn}{\code{#3}}% Make entry in function index \begingroup \normalparens % notably, turn off `&' magic, which prevents % at least some C++ text from working \defname {\defheaderxcond#2\relax$.$#3}{#1}% \deftypefunargs {#4}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } % @defmac == @deffn Macro \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index \begingroup\defname {#1}{\putwordDefmac}% \defunargs {#2}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } % @defspec == @deffn Special Form \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index \begingroup\defname {#1}{\putwordDefspec}% \defunargs {#2}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } % @defop CATEGORY CLASS OPERATION ARG... % \def\defop #1 {\def\defoptype{#1}% \defopparsebody\Edefop\defopx\defopheader\defoptype} % \def\defopheader#1#2#3{% \dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index \begingroup\defname {#2}{\defoptype\ \putwordon\ #1}% \defunargs {#3}\endgroup % } % @deftypeop CATEGORY CLASS TYPE OPERATION ARG... % \def\deftypeop #1 {\def\deftypeopcategory{#1}% \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader \deftypeopcategory} % % #1 is the class name, #2 the data type, #3 the operation name, #4 the args. \def\deftypeopheader#1#2#3#4{% \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index \begingroup \defname{\defheaderxcond#2\relax$.$#3} {\deftypeopcategory\ \putwordon\ \code{#1}}% \deftypefunargs{#4}% \endgroup } % @deftypemethod CLASS TYPE METHOD ARG... % \def\deftypemethod{% \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} % % #1 is the class name, #2 the data type, #3 the method name, #4 the args. \def\deftypemethodheader#1#2#3#4{% \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index \begingroup \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}% \deftypefunargs{#4}% \endgroup } % @deftypeivar CLASS TYPE VARNAME % \def\deftypeivar{% \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader} % % #1 is the class name, #2 the data type, #3 the variable name. \def\deftypeivarheader#1#2#3{% \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index \begingroup \defname{\defheaderxcond#2\relax$.$#3} {\putwordInstanceVariableof\ \code{#1}}% \defvarargs{#3}% \endgroup } % @defmethod == @defop Method % \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} % % #1 is the class name, #2 the method name, #3 the args. \def\defmethodheader#1#2#3{% \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index \begingroup \defname{#2}{\putwordMethodon\ \code{#1}}% \defunargs{#3}% \endgroup } % @defcv {Class Option} foo-class foo-flag \def\defcv #1 {\def\defcvtype{#1}% \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} \def\defcvarheader #1#2#3{% \dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index \begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}% \defvarargs {#3}\endgroup % } % @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME % \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} % \def\defivarheader#1#2#3{% \dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index \begingroup \defname{#2}{\putwordInstanceVariableof\ #1}% \defvarargs{#3}% \endgroup } % @defvar % First, define the processing that is wanted for arguments of @defvar. % This is actually simple: just print them in roman. % This must expand the args and terminate the paragraph they make up \def\defvarargs #1{\normalparens #1% \interlinepenalty=10000 \endgraf\nobreak\vskip -\parskip\nobreak} % @defvr Counter foo-count \def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader} \def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% \begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} % @defvar == @defvr Variable \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index \begingroup\defname {#1}{\putwordDefvar}% \defvarargs {#2}\endgroup % } % @defopt == @defvr {User Option} \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index \begingroup\defname {#1}{\putwordDefopt}% \defvarargs {#2}\endgroup % } % @deftypevar int foobar \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} % #1 is the data type. #2 is the name, perhaps followed by text that % is actually part of the data type, which should not be put into the index. \def\deftypevarheader #1#2{% \dovarind#2 \relax% Make entry in variables index \begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}% \interlinepenalty=10000 \endgraf\nobreak\vskip -\parskip\nobreak \endgroup} \def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} % @deftypevr {Global Flag} int enable \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} \def\deftypevrheader #1#2#3{\dovarind#3 \relax% \begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1} \interlinepenalty=10000 \endgraf\nobreak\vskip -\parskip\nobreak \endgroup} % Now define @deftp % Args are printed in bold, a slight difference from @defvar. \def\deftpargs #1{\bf \defvarargs{#1}} % @deftp Class window height width ... \def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader} \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} % These definitions are used if you use @defunx (etc.) % anywhere other than immediately after a @defun or @defunx. % \def\defcvx#1 {\errmessage{@defcvx in invalid context}} \def\deffnx#1 {\errmessage{@deffnx in invalid context}} \def\defivarx#1 {\errmessage{@defivarx in invalid context}} \def\defmacx#1 {\errmessage{@defmacx in invalid context}} \def\defmethodx#1 {\errmessage{@defmethodx in invalid context}} \def\defoptx #1 {\errmessage{@defoptx in invalid context}} \def\defopx#1 {\errmessage{@defopx in invalid context}} \def\defspecx#1 {\errmessage{@defspecx in invalid context}} \def\deftpx#1 {\errmessage{@deftpx in invalid context}} \def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}} \def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}} \def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}} \def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}} \def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}} \def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}} \def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}} \def\defunx#1 {\errmessage{@defunx in invalid context}} \def\defvarx#1 {\errmessage{@defvarx in invalid context}} \def\defvrx#1 {\errmessage{@defvrx in invalid context}} \message{macros,} % @macro. % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. \ifx\eTeXversion\undefined \newwrite\macscribble \def\scanmacro#1{% \begingroup \newlinechar`\^^M % Undo catcode changes of \startcontents and \doprintindex \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ % Append \endinput to make sure that TeX does not see the ending newline. \toks0={#1\endinput}% \immediate\openout\macscribble=\jobname.tmp \immediate\write\macscribble{\the\toks0}% \immediate\closeout\macscribble \let\xeatspaces\eatspaces \input \jobname.tmp \endgroup } \else \def\scanmacro#1{% \begingroup \newlinechar`\^^M % Undo catcode changes of \startcontents and \doprintindex \catcode`\@=0 \catcode`\\=12 \escapechar=`\@ \let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} \fi \newcount\paramno % Count of parameters \newtoks\macname % Macro name \newif\ifrecursive % Is it recursive? \def\macrolist{} % List of all defined macros in the form % \do\macro1\do\macro2... % Utility routines. % Thisdoes \let #1 = #2, except with \csnames. \def\cslet#1#2{% \expandafter\expandafter \expandafter\let \expandafter\expandafter \csname#1\endcsname \csname#2\endcsname} % Trim leading and trailing spaces off a string. % Concepts from aro-bend problem 15 (see CTAN). {\catcode`\@=11 \gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} \gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} \gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} \def\unbrace#1{#1} \unbrace{\gdef\trim@@@ #1 } #2@{#1} } % Trim a single trailing ^^M off a string. {\catcode`\^^M=12\catcode`\Q=3% \gdef\eatcr #1{\eatcra #1Q^^MQ}% \gdef\eatcra#1^^MQ{\eatcrb#1Q}% \gdef\eatcrb#1Q#2Q{#1}% } % Macro bodies are absorbed as an argument in a context where % all characters are catcode 10, 11 or 12, except \ which is active % (as in normal texinfo). It is necessary to change the definition of \. % It's necessary to have hard CRs when the macro is executed. This is % done by making ^^M (\endlinechar) catcode 12 when reading the macro % body, and then making it the \newlinechar in \scanmacro. \def\macrobodyctxt{% \catcode`\~=12 \catcode`\^=12 \catcode`\_=12 \catcode`\|=12 \catcode`\<=12 \catcode`\>=12 \catcode`\+=12 \catcode`\{=12 \catcode`\}=12 \catcode`\@=12 \catcode`\^^M=12 \usembodybackslash} \def\macroargctxt{% \catcode`\~=12 \catcode`\^=12 \catcode`\_=12 \catcode`\|=12 \catcode`\<=12 \catcode`\>=12 \catcode`\+=12 \catcode`\@=12 \catcode`\\=12} % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N % where N is the macro parameter number. % We define \csname macarg.\endcsname to be \realbackslash, so % \\ in macro replacement text gets you a backslash. {\catcode`@=0 @catcode`@\=@active @gdef@usembodybackslash{@let\=@mbodybackslash} @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} } \expandafter\def\csname macarg.\endcsname{\realbackslash} \def\macro{\recursivefalse\parsearg\macroxxx} \def\rmacro{\recursivetrue\parsearg\macroxxx} \def\macroxxx#1{% \getargs{#1}% now \macname is the macname and \argl the arglist \ifx\argl\empty % no arguments \paramno=0% \else \expandafter\parsemargdef \argl;% \fi \if1\csname ismacro.\the\macname\endcsname \message{Warning: redefining \the\macname}% \else \expandafter\ifx\csname \the\macname\endcsname \relax \else \errmessage{Macro name \the\macname\space already defined}\fi \global\cslet{macsave.\the\macname}{\the\macname}% \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% % Add the macroname to \macrolist \toks0 = \expandafter{\macrolist\do}% \xdef\macrolist{\the\toks0 \expandafter\noexpand\csname\the\macname\endcsname}% \fi \begingroup \macrobodyctxt \ifrecursive \expandafter\parsermacbody \else \expandafter\parsemacbody \fi} \def\unmacro{\parsearg\unmacroxxx} \def\unmacroxxx#1{% \if1\csname ismacro.#1\endcsname \global\cslet{#1}{macsave.#1}% \global\expandafter\let \csname ismacro.#1\endcsname=0% % Remove the macro name from \macrolist \begingroup \edef\tempa{\expandafter\noexpand\csname#1\endcsname}% \def\do##1{% \def\tempb{##1}% \ifx\tempa\tempb % remove this \else \toks0 = \expandafter{\newmacrolist\do}% \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}% \fi}% \def\newmacrolist{}% % Execute macro list to define \newmacrolist \macrolist \global\let\macrolist\newmacrolist \endgroup \else \errmessage{Macro #1 not defined}% \fi } % This makes use of the obscure feature that if the last token of a % <parameter list> is #, then the preceding argument is delimited by % an opening brace, and that opening brace is not consumed. \def\getargs#1{\getargsxxx#1{}} \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} \def\getmacname #1 #2\relax{\macname={#1}} \def\getmacargs#1{\def\argl{#1}} % Parse the optional {params} list. Set up \paramno and \paramlist % so \defmacro knows what to do. Define \macarg.blah for each blah % in the params list, to be ##N where N is the position in that list. % That gets used by \mbodybackslash (above). % We need to get `macro parameter char #' into several definitions. % The technique used is stolen from LaTeX: let \hash be something % unexpandable, insert that wherever you need a #, and then redefine % it to # just before using the token list produced. % % The same technique is used to protect \eatspaces till just before % the macro is used. \def\parsemargdef#1;{\paramno=0\def\paramlist{}% \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} \def\parsemargdefxxx#1,{% \if#1;\let\next=\relax \else \let\next=\parsemargdefxxx \advance\paramno by 1% \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname {\xeatspaces{\hash\the\paramno}}% \edef\paramlist{\paramlist\hash\the\paramno,}% \fi\next} % These two commands read recursive and nonrecursive macro bodies. % (They're different since rec and nonrec macros end differently.) \long\def\parsemacbody#1@end macro% {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% \long\def\parsermacbody#1@end rmacro% {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% % This defines the macro itself. There are six cases: recursive and % nonrecursive macros of zero, one, and many arguments. % Much magic with \expandafter here. % \xdef is used so that macro definitions will survive the file % they're defined in; @include reads the file inside a group. \def\defmacro{% \let\hash=##% convert placeholders to macro parameter chars \ifrecursive \ifcase\paramno % 0 \expandafter\xdef\csname\the\macname\endcsname{% \noexpand\scanmacro{\temp}}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt \noexpand\braceorline \expandafter\noexpand\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% \egroup\noexpand\scanmacro{\temp}}% \else % many \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt \noexpand\csname\the\macname xx\endcsname}% \expandafter\xdef\csname\the\macname xx\endcsname##1{% \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter \csname\the\macname xxx\endcsname \paramlist{\egroup\noexpand\scanmacro{\temp}}% \fi \else \ifcase\paramno % 0 \expandafter\xdef\csname\the\macname\endcsname{% \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt \noexpand\braceorline \expandafter\noexpand\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \else % many \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt \expandafter\noexpand\csname\the\macname xx\endcsname}% \expandafter\xdef\csname\the\macname xx\endcsname##1{% \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter \csname\the\macname xxx\endcsname \paramlist{% \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \fi \fi} \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} % \braceorline decides whether the next nonwhitespace character is a % {. If so it reads up to the closing }, if not, it reads the whole % line. Whatever was read is then fed to the next control sequence % as an argument (by \parsebrace or \parsearg) \def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% \ifx\nchar\bgroup\else \expandafter\parsearg \fi \next} % We mant to disable all macros during \shipout so that they are not % expanded by \write. \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% \edef\next{\macrolist}\expandafter\endgroup\next} % @alias. % We need some trickery to remove the optional spaces around the equal % sign. Just make them active and then expand them all to nothing. \def\alias{\begingroup\obeyspaces\parsearg\aliasxxx} \def\aliasxxx #1{\aliasyyy#1\relax} \def\aliasyyy #1=#2\relax{\ignoreactivespaces \edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=% \expandafter\noexpand\csname#2\endcsname}% \expandafter\endgroup\next} \message{cross references,} % @xref etc. \newwrite\auxfile \newif\ifhavexrefs % True if xref values are known. \newif\ifwarnedxrefs % True if we warned once that they aren't known. % @inforef is relatively simple. \def\inforef #1{\inforefzzz #1,,,,**} \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} % @node's job is to define \lastnode. \def\node{\ENVcheck\parsearg\nodezzz} \def\nodezzz#1{\nodexxx [#1,]} \def\nodexxx[#1,#2]{\gdef\lastnode{#1}} \let\nwnode=\node \let\lastnode=\relax % The sectioning commands (@chapter, etc.) call these. \def\donoderef{% \ifx\lastnode\relax\else \expandafter\expandafter\expandafter\setref{\lastnode}% {Ysectionnumberandtype}% \global\let\lastnode=\relax \fi } \def\unnumbnoderef{% \ifx\lastnode\relax\else \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}% \global\let\lastnode=\relax \fi } \def\appendixnoderef{% \ifx\lastnode\relax\else \expandafter\expandafter\expandafter\setref{\lastnode}% {Yappendixletterandtype}% \global\let\lastnode=\relax \fi } % @anchor{NAME} -- define xref target at arbitrary point. % \newcount\savesfregister \gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} \gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} \gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} % \setref{NAME}{SNT} defines a cross-reference point NAME, namely % NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have % to set \indexdummies so commands such as @code in a section title % aren't expanded. It would be nicer not to expand the titles in the % first place, but there's so many layers that that is hard to do. % \def\setref#1#2{{% \indexdummies \pdfmkdest{#1}% \dosetq{#1-title}{Ytitle}% \dosetq{#1-pg}{Ypagenumber}% \dosetq{#1-snt}{#2}% }} % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed % manual. All but the node name can be omitted. % \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces \def\printedmanual{\ignorespaces #5}% \def\printednodename{\ignorespaces #3}% \setbox1=\hbox{\printedmanual}% \setbox0=\hbox{\printednodename}% \ifdim \wd0 = 0pt % No printed node name was explicitly given. \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax % Use the node name inside the square brackets. \def\printednodename{\ignorespaces #1}% \else % Use the actual chapter/section title appear inside % the square brackets. Use the real section title if we have it. \ifdim \wd1 > 0pt % It is in another manual, so we don't have it. \def\printednodename{\ignorespaces #1}% \else \ifhavexrefs % We know the real title if we have the xref values. \def\printednodename{\refx{#1-title}{}}% \else % Otherwise just copy the Info node name. \def\printednodename{\ignorespaces #1}% \fi% \fi \fi \fi % % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not % insert empty discretionaries after hyphens, which means that it will % not find a line break at a hyphen in a node names. Since some manuals % are best written with fairly long node names, containing hyphens, this % is a loss. Therefore, we give the text of the node name again, so it % is as if TeX is seeing it for the first time. \ifpdf \leavevmode \getfilename{#4}% {\normalturnoffactive \ifnum\filenamelength>0 \startlink attr{/Border [0 0 0]}% goto file{\the\filename.pdf} name{#1}% \else \startlink attr{/Border [0 0 0]}% goto name{#1}% \fi }% \linkcolor \fi % \ifdim \wd1 > 0pt \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}% \else % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand % into the usual \leavevmode...\vrule stuff for purposes of % printing. So we \turnoffactive for the \refx-snt, back on for the % printing, back off for the \refx-pg. {\normalturnoffactive % Only output a following space if the -snt ref is nonempty; for % @unnumbered and @anchor, it won't be. \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi }% % [mynode], [\printednodename],\space % page 3 \turnoffactive \putwordpage\tie\refx{#1-pg}{}% \fi \endlink \endgroup} % \dosetq is the interface for calls from other macros % Use \normalturnoffactive so that punctuation chars such as underscore % and backslash work in node names. (\turnoffactive doesn't do \.) \def\dosetq#1#2{% {\let\folio=0% \normalturnoffactive \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% \iflinks \next \fi }% } % \internalsetq {foo}{page} expands into % CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} % When the aux file is read, ' is the escape character \def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} % Things to be expanded by \internalsetq \def\Ypagenumber{\folio} \def\Ytitle{\thissection} \def\Ynothing{} \def\Ysectionnumberandtype{% \ifnum\secno=0 \putwordChapter\xreftie\the\chapno % \else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno % \else \ifnum \subsubsecno=0 % \putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno % \else % \putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % \fi \fi \fi } \def\Yappendixletterandtype{% \ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}% \else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno % \else \ifnum \subsubsecno=0 % \putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno % \else % \putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno % \fi \fi \fi } \gdef\xreftie{'tie} % Use TeX 3.0's \inputlineno to get the line number, for better error % messages, but if we're using an old version of TeX, don't do anything. % \ifx\inputlineno\thisisundefined \let\linenumber = \empty % Non-3.0. \else \def\linenumber{\the\inputlineno:\space} \fi % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. % If its value is nonempty, SUFFIX is output afterward. \def\refx#1#2{% \expandafter\ifx\csname X#1\endcsname\relax % If not defined, say something at least. \angleleft un\-de\-fined\angleright \iflinks \ifhavexrefs \message{\linenumber Undefined cross reference `#1'.}% \else \ifwarnedxrefs\else \global\warnedxrefstrue \message{Cross reference values unknown; you must run TeX again.}% \fi \fi \fi \else % It's defined, so just use it. \csname X#1\endcsname \fi #2% Output the suffix in any case. } % This is the macro invoked by entries in the aux file. % \def\xrdef#1{\begingroup % Reenable \ as an escape while reading the second argument. \catcode`\\ = 0 \afterassignment\endgroup \expandafter\gdef\csname X#1\endcsname } % Read the last existing aux file, if any. No error if none exists. \def\readauxfile{\begingroup \catcode`\^^@=\other \catcode`\^^A=\other \catcode`\^^B=\other \catcode`\^^C=\other \catcode`\^^D=\other \catcode`\^^E=\other \catcode`\^^F=\other \catcode`\^^G=\other \catcode`\^^H=\other \catcode`\^^K=\other \catcode`\^^L=\other \catcode`\^^N=\other \catcode`\^^P=\other \catcode`\^^Q=\other \catcode`\^^R=\other \catcode`\^^S=\other \catcode`\^^T=\other \catcode`\^^U=\other \catcode`\^^V=\other \catcode`\^^W=\other \catcode`\^^X=\other \catcode`\^^Z=\other \catcode`\^^[=\other \catcode`\^^\=\other \catcode`\^^]=\other \catcode`\^^^=\other \catcode`\^^_=\other \catcode`\@=\other \catcode`\^=\other % It was suggested to define this as 7, which would allow ^^e4 etc. % in xref tags, i.e., node names. But since ^^e4 notation isn't % supported in the main text, it doesn't seem desirable. Furthermore, % that is not enough: for node names that actually contain a ^ % character, we would end up writing a line like this: 'xrdef {'hat % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first % argument, and \hat is not an expandable control sequence. It could % all be worked out, but why? Either we support ^^ or we don't. % % The other change necessary for this was to define \auxhat: % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter % and then to call \auxhat in \setq. % \catcode`\~=\other \catcode`\[=\other \catcode`\]=\other \catcode`\"=\other \catcode`\_=\other \catcode`\|=\other \catcode`\<=\other \catcode`\>=\other \catcode`\$=\other \catcode`\#=\other \catcode`\&=\other \catcode`+=\other % avoid \+ for paranoia even though we've turned it off % Make the characters 128-255 be printing characters {% \count 1=128 \def\loop{% \catcode\count 1=\other \advance\count 1 by 1 \ifnum \count 1<256 \loop \fi }% }% % The aux file uses ' as the escape (for now). % Turn off \ as an escape so we do not lose on % entries which were dumped with control sequences in their names. % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ % Reference to such entries still does not work the way one would wish, % but at least they do not bomb out when the aux file is read in. \catcode`\{=1 \catcode`\}=2 \catcode`\%=\other \catcode`\'=0 \catcode`\\=\other % \openin 1 \jobname.aux \ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue \global\warnedobstrue \fi % Open the new aux file. TeX will close it automatically at exit. \openout\auxfile=\jobname.aux \endgroup} % Footnotes. \newcount \footnoteno % The trailing space in the following definition for supereject is % vital for proper filling; pages come out unaligned when you do a % pagealignmacro call if that space before the closing brace is % removed. (Generally, numeric constants should always be followed by a % space to prevent strange expansion errors.) \def\supereject{\par\penalty -20000\footnoteno =0 } % @footnotestyle is meaningful for info output only. \let\footnotestyle=\comment \let\ptexfootnote=\footnote {\catcode `\@=11 % % Auto-number footnotes. Otherwise like plain. \gdef\footnote{% \global\advance\footnoteno by \@ne \edef\thisfootno{$^{\the\footnoteno}$}% % % In case the footnote comes at the end of a sentence, preserve the % extra spacing after we do the footnote number. \let\@sf\empty \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi % % Remove inadvertent blank space before typesetting the footnote number. \unskip \thisfootno\@sf \footnotezzz }% % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. % % Oh yes, they do; otherwise, @ifset and anything else that uses % \parseargline fail inside footnotes because the tokens are fixed when % the footnote is read. --karl, 16nov96. % \long\gdef\footnotezzz{\insert\footins\bgroup % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. \interlinepenalty\interfootnotelinepenalty \splittopskip\ht\strutbox % top baseline for broken footnotes \splitmaxdepth\dp\strutbox \floatingpenalty\@MM \leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip \parindent\defaultparindent % \smallfonts \rm % % Because we use hanging indentation in footnotes, a @noindent appears % to exdent this text, so make it be a no-op. makeinfo does not use % hanging indentation so @noindent can still be needed within footnote % text after an @example or the like (not that this is good style). \let\noindent = \relax % % Hang the footnote text off the number. Use \everypar in case the % footnote extends for more than one paragraph. \everypar = {\hang}% \textindent{\thisfootno}% % % Don't crash into the line above the footnote text. Since this % expands into a box, it must come within the paragraph, lest it % provide a place where TeX can split the footnote. \footstrut \futurelet\next\fo@t } \def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t \else\let\next\f@t\fi \next} \def\f@@t{\bgroup\aftergroup\@foot\let\next} \def\f@t#1{#1\@foot} \def\@foot{\strut\par\egroup} }%end \catcode `\@=11 % @| inserts a changebar to the left of the current line. It should % surround any changed text. This approach does *not* work if the % change spans more than two lines of output. To handle that, we would % have adopt a much more difficult approach (putting marks into the main % vertical list for the beginning and end of each change). % \def\|{% % \vadjust can only be used in horizontal mode. \leavevmode % % Append this vertical mode material after the current line in the output. \vadjust{% % We want to insert a rule with the height and depth of the current % leading; that is exactly what \strutbox is supposed to record. \vskip-\baselineskip % % \vadjust-items are inserted at the left edge of the type. So % the \llap here moves out into the left-hand margin. \llap{% % % For a thicker or thinner bar, change the `1pt'. \vrule height\baselineskip width1pt % % This is the space between the bar and the text. \hskip 12pt }% }% } % For a final copy, take out the rectangles % that mark overfull boxes (in case you have decided % that the text looks ok even though it passes the margin). % \def\finalout{\overfullrule=0pt} % @image. We use the macros from epsf.tex to support this. % If epsf.tex is not installed and @image is used, we complain. % % Check for and read epsf.tex up front. If we read it only at @image % time, we might be inside a group, and then its definitions would get % undone and the next image would fail. \openin 1 = epsf.tex \ifeof 1 \else \closein 1 % Do not bother showing banner with post-v2.7 epsf.tex (available in % doc/epsf.tex until it shows up on ctan). \def\epsfannounce{\toks0 = }% \input epsf.tex \fi % % We will only complain once about lack of epsf.tex. \newif\ifwarnednoepsf \newhelp\noepsfhelp{epsf.tex must be installed for images to work. It is also included in the Texinfo distribution, or you can get it from ftp://tug.org/tex/epsf.tex.} % \def\image#1{% \ifx\epsfbox\undefined \ifwarnednoepsf \else \errhelp = \noepsfhelp \errmessage{epsf.tex not found, images will be ignored}% \global\warnednoepsftrue \fi \else \imagexxx #1,,,,,\finish \fi } % % Arguments to @image: % #1 is (mandatory) image filename; we tack on .eps extension. % #2 is (optional) width, #3 is (optional) height. % #4 is (ignored optional) html alt text. % #5 is (ignored optional) extension. % #6 is just the usual extra ignored arg for parsing this stuff. \newif\ifimagevmode \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup \catcode`\^^M = 5 % in case we're inside an example \normalturnoffactive % allow _ et al. in names % If the image is by itself, center it. \ifvmode \imagevmodetrue \nobreak\bigskip % Usually we'll have text after the image which will insert % \parskip glue, so insert it here too to equalize the space % above and below. \nobreak\vskip\parskip \nobreak \line\bgroup\hss \fi % % Output the image. \ifpdf \dopdfimage{#1}{#2}{#3}% \else % \epsfbox itself resets \epsf?size at each figure. \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi \epsfbox{#1.eps}% \fi % \ifimagevmode \hss \egroup \bigbreak \fi % space after the image \endgroup} \message{localization,} % and i18n. % @documentlanguage is usually given very early, just after % @setfilename. If done too late, it may not override everything % properly. Single argument is the language abbreviation. % It would be nice if we could set up a hyphenation file here. % \def\documentlanguage{\parsearg\dodocumentlanguage} \def\dodocumentlanguage#1{% \tex % read txi-??.tex file in plain TeX. % Read the file if it exists. \openin 1 txi-#1.tex \ifeof1 \errhelp = \nolanghelp \errmessage{Cannot read language file txi-#1.tex}% \let\temp = \relax \else \def\temp{\input txi-#1.tex }% \fi \temp \endgroup } \newhelp\nolanghelp{The given language definition file cannot be found or is empty. Maybe you need to install it? In the current directory should work if nowhere else does.} % @documentencoding should change something in TeX eventually, most % likely, but for now just recognize it. \let\documentencoding = \comment % Page size parameters. % \newdimen\defaultparindent \defaultparindent = 15pt \chapheadingskip = 15pt plus 4pt minus 2pt \secheadingskip = 12pt plus 3pt minus 2pt \subsecheadingskip = 9pt plus 2pt minus 2pt % Prevent underfull vbox error messages. \vbadness = 10000 % Don't be so finicky about underfull hboxes, either. \hbadness = 2000 % Following George Bush, just get rid of widows and orphans. \widowpenalty=10000 \clubpenalty=10000 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're % using an old version of TeX, don't do anything. We want the amount of % stretch added to depend on the line length, hence the dependence on % \hsize. We call this whenever the paper size is set. % \def\setemergencystretch{% \ifx\emergencystretch\thisisundefined % Allow us to assign to \emergencystretch anyway. \def\emergencystretch{\dimen0}% \else \emergencystretch = .15\hsize \fi } % Parameters in order: 1) textheight; 2) textwidth; 3) voffset; % 4) hoffset; 5) binding offset; 6) topskip. We also call % \setleading{\textleading}, so the caller should define \textleading. % The caller should also set \parskip. % \def\internalpagesizes#1#2#3#4#5#6{% \voffset = #3\relax \topskip = #6\relax \splittopskip = \topskip % \vsize = #1\relax \advance\vsize by \topskip \outervsize = \vsize \advance\outervsize by 2\topandbottommargin \pageheight = \vsize % \hsize = #2\relax \outerhsize = \hsize \advance\outerhsize by 0.5in \pagewidth = \hsize % \normaloffset = #4\relax \bindingoffset = #5\relax % \setleading{\textleading} % \parindent = \defaultparindent \setemergencystretch } % Use `small' versions. % \def\smallenvironments{% \let\smalldisplay = \smalldisplayx \let\smallexample = \smalllispx \let\smallformat = \smallformatx \let\smalllisp = \smalllispx } % @letterpaper (the default). \def\letterpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt \textleading = 13.2pt % % If page is nothing but text, make it come out even. \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}% }} % Use @smallbook to reset parameters for 7x9.5 (or so) format. \def\smallbook{{\globaldefs = 1 \parskip = 2pt plus 1pt \textleading = 12pt % \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}% % \lispnarrowing = 0.3in \tolerance = 700 \hfuzz = 1pt \contentsrightmargin = 0pt \deftypemargin = 0pt \defbodyindent = .5cm \smallenvironments }} % Use @afourpaper to print on European A4 paper. \def\afourpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt \textleading = 12pt % \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}% % \tolerance = 700 \hfuzz = 1pt }} % Use @afivepaper to print on European A5 paper. % From romildo@urano.iceb.ufop.br, 2 July 2000. % He also recommends making @example and @lisp be small. \def\afivepaper{{\globaldefs = 1 \parskip = 2pt plus 1pt minus 0.1pt \textleading = 12.5pt % \internalpagesizes{166mm}{120mm}{\voffset}{-8mm}{\bindingoffset}{8pt}% % \lispnarrowing = 0.2in \tolerance = 800 \hfuzz = 1.2pt \contentsrightmargin = 0mm \deftypemargin = 0pt \defbodyindent = 2mm \tableindent = 12mm % \smallenvironments }} % A specific text layout, 24x15cm overall, intended for A4 paper. Top margin % 29mm, hence bottom margin 28mm, nominal side margin 3cm. \def\afourlatex{{\globaldefs = 1 \textleading = 13.6pt % \afourpaper \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}% % % Must explicitly reset to 0 because we call \afourpaper, apparently, % although this does not entirely make sense. \globaldefs = 0 }} % Use @afourwide to print on European A4 paper in wide format. \def\afourwide{% \afourpaper \internalpagesizes{6.5in}{9.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}% } % @pagesizes TEXTHEIGHT[,TEXTWIDTH] % Perhaps we should allow setting the margins, \topskip, \parskip, % and/or leading, also. Or perhaps we should compute them somehow. % \def\pagesizes{\parsearg\pagesizesxxx} \def\pagesizesxxx#1{\pagesizesyyy #1,,\finish} \def\pagesizesyyy#1,#2,#3\finish{{% \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi \globaldefs = 1 % \parskip = 3pt plus 2pt minus 1pt \setleading{\textleading}% % \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}% }} % Set default to letter. % \letterpaper \message{and turning on texinfo input format.} % Define macros to output various characters with catcode for normal text. \catcode`\"=\other \catcode`\~=\other \catcode`\^=\other \catcode`\_=\other \catcode`\|=\other \catcode`\<=\other \catcode`\>=\other \catcode`\+=\other \catcode`\$=\other \def\normaldoublequote{"} \def\normaltilde{~} \def\normalcaret{^} \def\normalunderscore{_} \def\normalverticalbar{|} \def\normalless{<} \def\normalgreater{>} \def\normalplus{+} \def\normaldollar{$}%$ font-lock fix % This macro is used to make a character print one way in ttfont % where it can probably just be output, and another way in other fonts, % where something hairier probably needs to be done. % % #1 is what to print if we are indeed using \tt; #2 is what to print % otherwise. Since all the Computer Modern typewriter fonts have zero % interword stretch (and shrink), and it is reasonable to expect all % typewriter fonts to have this, we can check that font parameter. % \def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} % Same as above, but check for italic font. Actually this also catches % non-italic slanted fonts since it is impossible to distinguish them from % italic fonts. But since this is only used by $ and it uses \sl anyway % this is not a problem. \def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} % Turn off all special characters except @ % (and those which the user can use as if they were ordinary). % Most of these we simply print from the \tt font, but for some, we can % use math or other variants that look better in normal text. \catcode`\"=\active \def\activedoublequote{{\tt\char34}} \let"=\activedoublequote \catcode`\~=\active \def~{{\tt\char126}} \chardef\hat=`\^ \catcode`\^=\active \def^{{\tt \hat}} \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} % Subroutine for the previous macro. \def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}} \catcode`\|=\active \def|{{\tt\char124}} \chardef \less=`\< \catcode`\<=\active \def<{{\tt \less}} \chardef \gtr=`\> \catcode`\>=\active \def>{{\tt \gtr}} \catcode`\+=\active \def+{{\tt \char 43}} \catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix %\catcode 27=\active %\def^^[{$\diamondsuit$} % Set up an active definition for =, but don't enable it most of the time. {\catcode`\==\active \global\def={{\tt \char 61}}} \catcode`+=\active \catcode`\_=\active % If a .fmt file is being used, characters that might appear in a file % name cannot be active until we have parsed the command line. % So turn them off again, and have \everyjob (or @setfilename) turn them on. % \otherifyactive is called near the end of this file. \def\otherifyactive{\catcode`+=\other \catcode`\_=\other} \catcode`\@=0 % \rawbackslashxx output one backslash character in current font \global\chardef\rawbackslashxx=`\\ %{\catcode`\\=\other %@gdef@rawbackslashxx{\}} % \rawbackslash redefines \ as input to do \rawbackslashxx. {\catcode`\\=\active @gdef@rawbackslash{@let\=@rawbackslashxx }} % \normalbackslash outputs one backslash in fixed width font. \def\normalbackslash{{\tt\rawbackslashxx}} % \catcode 17=0 % Define control-q \catcode`\\=\active % Used sometimes to turn off (effectively) the active characters % even after parsing them. @def@turnoffactive{@let"=@normaldoublequote @let\=@realbackslash @let~=@normaltilde @let^=@normalcaret @let_=@normalunderscore @let|=@normalverticalbar @let<=@normalless @let>=@normalgreater @let+=@normalplus @let$=@normaldollar}%$ font-lock fix @def@normalturnoffactive{@let"=@normaldoublequote @let\=@normalbackslash @let~=@normaltilde @let^=@normalcaret @let_=@normalunderscore @let|=@normalverticalbar @let<=@normalless @let>=@normalgreater @let+=@normalplus @let$=@normaldollar}%$ font-lock fix % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. @otherifyactive % If a .fmt file is being used, we don't want the `\input texinfo' to show up. % That is what \eatinput is for; after that, the `\' should revert to printing % a backslash. % @gdef@eatinput input texinfo{@fixbackslash} @global@let\ = @eatinput % On the other hand, perhaps the file did not have a `\input texinfo'. Then % the first `\{ in the file would cause an error. This macro tries to fix % that, assuming it is called before the first `\' could plausibly occur. % Also back turn on active characters that might appear in the input % file name, in case not using a pre-dumped format. % @gdef@fixbackslash{% @ifx\@eatinput @let\ = @normalbackslash @fi @catcode`+=@active @catcode`@_=@active } % Say @foo, not \foo, in error messages. @escapechar = `@@ % These look ok in all fonts, so just make them not special. @catcode`@& = @other @catcode`@# = @other @catcode`@% = @other @c Set initial fonts. @textfonts @rm @c Local variables: @c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" @c time-stamp-start: "def\\\\texinfoversion{" @c time-stamp-format: "%:y-%02m-%02d.%02H" @c time-stamp-end: "}" @c End: @ignore arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 @end ignore