Mercurial > emacs
view src/process.c @ 5647:7bd40f51b9e9
(double_dollars): New function.
(Fread_file_name_internal): Use double_dollars.
(Fread_file_name): Likewise.
| author | Richard M. Stallman <rms@gnu.org> |
|---|---|
| date | Thu, 20 Jan 1994 23:50:37 +0000 |
| parents | 466bc8ef8e21 |
| children | 1322c4daeda2 |
line wrap: on
line source
/* Asynchronous subprocess control for GNU Emacs. Copyright (C) 1985, 86, 87, 88, 93, 94 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <signal.h> #include <config.h> /* This file is split into two parts by the following preprocessor conditional. The 'then' clause contains all of the support for asynchronous subprocesses. The 'else' clause contains stub versions of some of the asynchronous subprocess routines that are often called elsewhere in Emacs, so we don't have to #ifdef the sections that call them. */ #ifdef subprocesses #include <stdio.h> #include <errno.h> #include <setjmp.h> #include <sys/types.h> /* some typedefs are used in sys/file.h */ #include <sys/file.h> #include <sys/stat.h> #ifdef HAVE_SOCKETS /* TCP connection support, if kernel can do it */ #include <sys/socket.h> #include <netdb.h> #include <netinet/in.h> #include <arpa/inet.h> #endif /* HAVE_SOCKETS */ /* TERM is a poor-man's SLIP, used on Linux. */ #ifdef TERM #include <client.h> #endif /* DGUX inet_addr returns a 'struct in_addr'. */ #ifdef DGUX #define IN_ADDR struct in_addr #define NUMERIC_ADDR_ERROR (numeric_addr.s_addr == -1) #else #define IN_ADDR unsigned long #define NUMERIC_ADDR_ERROR (numeric_addr == -1) #endif #if defined(BSD) || defined(STRIDE) #include <sys/ioctl.h> #if !defined (O_NDELAY) && defined (HAVE_PTYS) && !defined(USG5) #include <fcntl.h> #endif /* HAVE_PTYS and no O_NDELAY */ #endif /* BSD or STRIDE */ #ifdef BROKEN_O_NONBLOCK #undef O_NONBLOCK #endif /* BROKEN_O_NONBLOCK */ #ifdef NEED_BSDTTY #include <bsdtty.h> #endif #ifdef IRIS #include <sys/sysmacros.h> /* for "minor" */ #endif /* not IRIS */ #include "systime.h" #include "systty.h" #include "lisp.h" #include "window.h" #include "buffer.h" #include "process.h" #include "termhooks.h" #include "termopts.h" #include "commands.h" #include "frame.h" Lisp_Object Qprocessp; Lisp_Object Qrun, Qstop, Qsignal, Qopen, Qclosed; /* Qexit is declared and initialized in eval.c. */ /* a process object is a network connection when its childp field is neither Qt nor Qnil but is instead a string (name of foreign host we are connected to + name of port we are connected to) */ #ifdef HAVE_SOCKETS static Lisp_Object stream_process; #define NETCONN_P(p) (XGCTYPE (XPROCESS (p)->childp) == Lisp_String) #else #define NETCONN_P(p) 0 #endif /* HAVE_SOCKETS */ /* Define first descriptor number available for subprocesses. */ #ifdef VMS #define FIRST_PROC_DESC 1 #else /* Not VMS */ #define FIRST_PROC_DESC 3 #endif /* Define SIGCHLD as an alias for SIGCLD. There are many conditionals testing SIGCHLD. */ #if !defined (SIGCHLD) && defined (SIGCLD) #define SIGCHLD SIGCLD #endif /* SIGCLD */ #include "syssignal.h" #include "syswait.h" extern int errno; extern char *strerror (); #ifdef VMS extern char *sys_errlist[]; #endif #ifndef VMS #ifndef BSD4_1 #ifndef LINUX extern char *sys_siglist[]; #endif /* not LINUX */ #else /* BSD4_1 */ char *sys_siglist[] = { "bum signal!!", "hangup", "interrupt", "quit", "illegal instruction", "trace trap", "iot instruction", "emt instruction", "floating point exception", "kill", "bus error", "segmentation violation", "bad argument to system call", "write on a pipe with no one to read it", "alarm clock", "software termination signal from kill", "status signal", "sendable stop signal not from tty", "stop signal from tty", "continue a stopped process", "child status has changed", "background read attempted from control tty", "background write attempted from control tty", "input record available at control tty", "exceeded CPU time limit", "exceeded file size limit" }; #endif #endif /* VMS */ /* t means use pty, nil means use a pipe, maybe other values to come. */ static Lisp_Object Vprocess_connection_type; #ifdef SKTPAIR #ifndef HAVE_SOCKETS #include <sys/socket.h> #endif #endif /* SKTPAIR */ /* Number of events of change of status of a process. */ static int process_tick; /* Number of events for which the user or sentinel has been notified. */ static int update_tick; #ifdef FD_SET /* We could get this from param.h, but better not to depend on finding that. And better not to risk that it might define other symbols used in this file. */ #ifdef FD_SETSIZE #define MAXDESC FD_SETSIZE #else #define MAXDESC 64 #endif #define SELECT_TYPE fd_set #else /* no FD_SET */ #define MAXDESC 32 #define SELECT_TYPE int /* Define the macros to access a single-int bitmap of descriptors. */ #define FD_SET(n, p) (*(p) |= (1 << (n))) #define FD_CLR(n, p) (*(p) &= ~(1 << (n))) #define FD_ISSET(n, p) (*(p) & (1 << (n))) #define FD_ZERO(p) (*(p) = 0) #endif /* no FD_SET */ /* Mask of bits indicating the descriptors that we wait for input on */ static SELECT_TYPE input_wait_mask; /* Descriptor to use for keyboard input. */ static int keyboard_descriptor; /* Nonzero means delete a process right away if it exits. */ static int delete_exited_processes; /* Indexed by descriptor, gives the process (if any) for that descriptor */ static Lisp_Object chan_process[MAXDESC]; /* Alist of elements (NAME . PROCESS) */ static Lisp_Object Vprocess_alist; /* Buffered-ahead input char from process, indexed by channel. -1 means empty (no char is buffered). Used on sys V where the only way to tell if there is any output from the process is to read at least one char. Always -1 on systems that support FIONREAD. */ static int proc_buffered_char[MAXDESC]; static Lisp_Object get_process (); /* Compute the Lisp form of the process status, p->status, from the numeric status that was returned by `wait'. */ Lisp_Object status_convert (); update_status (p) struct Lisp_Process *p; { union { int i; WAITTYPE wt; } u; u.i = XFASTINT (p->raw_status_low) + (XFASTINT (p->raw_status_high) << 16); p->status = status_convert (u.wt); p->raw_status_low = Qnil; p->raw_status_high = Qnil; } /* Convert a process status word in Unix format to the list that we use internally. */ Lisp_Object status_convert (w) WAITTYPE w; { if (WIFSTOPPED (w)) return Fcons (Qstop, Fcons (make_number (WSTOPSIG (w)), Qnil)); else if (WIFEXITED (w)) return Fcons (Qexit, Fcons (make_number (WRETCODE (w)), WCOREDUMP (w) ? Qt : Qnil)); else if (WIFSIGNALED (w)) return Fcons (Qsignal, Fcons (make_number (WTERMSIG (w)), WCOREDUMP (w) ? Qt : Qnil)); else return Qrun; } /* Given a status-list, extract the three pieces of information and store them individually through the three pointers. */ void decode_status (l, symbol, code, coredump) Lisp_Object l; Lisp_Object *symbol; int *code; int *coredump; { Lisp_Object tem; if (XTYPE (l) == Lisp_Symbol) { *symbol = l; *code = 0; *coredump = 0; } else { *symbol = XCONS (l)->car; tem = XCONS (l)->cdr; *code = XFASTINT (XCONS (tem)->car); tem = XCONS (tem)->cdr; *coredump = !NILP (tem); } } /* Return a string describing a process status list. */ Lisp_Object status_message (status) Lisp_Object status; { Lisp_Object symbol; int code, coredump; Lisp_Object string, string2; decode_status (status, &symbol, &code, &coredump); if (EQ (symbol, Qsignal) || EQ (symbol, Qstop)) { char *signame = 0; if (code < NSIG) { #ifndef VMS signame = sys_siglist[code]; #else signame = sys_errlist[code]; #endif } if (signame == 0) signame = "unknown"; string = build_string (signame); string2 = build_string (coredump ? " (core dumped)\n" : "\n"); XSTRING (string)->data[0] = DOWNCASE (XSTRING (string)->data[0]); return concat2 (string, string2); } else if (EQ (symbol, Qexit)) { if (code == 0) return build_string ("finished\n"); string = Fnumber_to_string (make_number (code)); string2 = build_string (coredump ? " (core dumped)\n" : "\n"); return concat2 (build_string ("exited abnormally with code "), concat2 (string, string2)); } else return Fcopy_sequence (Fsymbol_name (symbol)); } #ifdef HAVE_PTYS /* Open an available pty, returning a file descriptor. Return -1 on failure. The file name of the terminal corresponding to the pty is left in the variable pty_name. */ char pty_name[24]; int allocate_pty () { struct stat stb; register c, i; int fd; /* Some systems name their pseudoterminals so that there are gaps in the usual sequence - for example, on HP9000/S700 systems, there are no pseudoterminals with names ending in 'f'. So we wait for three failures in a row before deciding that we've reached the end of the ptys. */ int failed_count = 0; #ifdef PTY_ITERATION PTY_ITERATION #else for (c = FIRST_PTY_LETTER; c <= 'z'; c++) for (i = 0; i < 16; i++) #endif { #ifdef PTY_NAME_SPRINTF PTY_NAME_SPRINTF #else sprintf (pty_name, "/dev/pty%c%x", c, i); #endif /* no PTY_NAME_SPRINTF */ #ifdef PTY_OPEN PTY_OPEN; #else /* no PTY_OPEN */ #ifdef IRIS /* Unusual IRIS code */ *ptyv = open ("/dev/ptc", O_RDWR | O_NDELAY, 0); if (fd < 0) return -1; if (fstat (fd, &stb) < 0) return -1; #else /* not IRIS */ if (stat (pty_name, &stb) < 0) { failed_count++; if (failed_count >= 3) return -1; } else failed_count = 0; #ifdef O_NONBLOCK fd = open (pty_name, O_RDWR | O_NONBLOCK, 0); #else fd = open (pty_name, O_RDWR | O_NDELAY, 0); #endif #endif /* not IRIS */ #endif /* no PTY_OPEN */ if (fd >= 0) { /* check to make certain that both sides are available this avoids a nasty yet stupid bug in rlogins */ #ifdef PTY_TTY_NAME_SPRINTF PTY_TTY_NAME_SPRINTF #else sprintf (pty_name, "/dev/tty%c%x", c, i); #endif /* no PTY_TTY_NAME_SPRINTF */ #ifndef UNIPLUS if (access (pty_name, 6) != 0) { close (fd); #if !defined(IRIS) && !defined(__sgi) continue; #else return -1; #endif /* IRIS */ } #endif /* not UNIPLUS */ setup_pty (fd); return fd; } } return -1; } #endif /* HAVE_PTYS */ Lisp_Object make_process (name) Lisp_Object name; { register Lisp_Object val, tem, name1; register struct Lisp_Process *p; char suffix[10]; register int i; /* size of process structure includes the vector header, so deduct for that. But struct Lisp_Vector includes the first element, thus deducts too much, so add it back. */ val = Fmake_vector (make_number ((sizeof (struct Lisp_Process) - sizeof (struct Lisp_Vector) + sizeof (Lisp_Object)) / sizeof (Lisp_Object)), Qnil); XSETTYPE (val, Lisp_Process); p = XPROCESS (val); XSET (p->infd, Lisp_Int, -1); XSET (p->outfd, Lisp_Int, -1); XFASTINT (p->pid) = 0; XFASTINT (p->tick) = 0; XFASTINT (p->update_tick) = 0; p->raw_status_low = Qnil; p->raw_status_high = Qnil; p->status = Qrun; p->mark = Fmake_marker (); /* If name is already in use, modify it until it is unused. */ name1 = name; for (i = 1; ; i++) { tem = Fget_process (name1); if (NILP (tem)) break; sprintf (suffix, "<%d>", i); name1 = concat2 (name, build_string (suffix)); } name = name1; p->name = name; Vprocess_alist = Fcons (Fcons (name, val), Vprocess_alist); return val; } remove_process (proc) register Lisp_Object proc; { register Lisp_Object pair; pair = Frassq (proc, Vprocess_alist); Vprocess_alist = Fdelq (pair, Vprocess_alist); Fset_marker (XPROCESS (proc)->mark, Qnil, Qnil); deactivate_process (proc); } DEFUN ("processp", Fprocessp, Sprocessp, 1, 1, 0, "Return t if OBJECT is a process.") (obj) Lisp_Object obj; { return XTYPE (obj) == Lisp_Process ? Qt : Qnil; } DEFUN ("get-process", Fget_process, Sget_process, 1, 1, 0, "Return the process named NAME, or nil if there is none.") (name) register Lisp_Object name; { if (XTYPE (name) == Lisp_Process) return name; CHECK_STRING (name, 0); return Fcdr (Fassoc (name, Vprocess_alist)); } DEFUN ("get-buffer-process", Fget_buffer_process, Sget_buffer_process, 1, 1, 0, "Return the (or, a) process associated with BUFFER.\n\ BUFFER may be a buffer or the name of one.") (name) register Lisp_Object name; { register Lisp_Object buf, tail, proc; if (NILP (name)) return Qnil; buf = Fget_buffer (name); if (NILP (buf)) return Qnil; for (tail = Vprocess_alist; !NILP (tail); tail = Fcdr (tail)) { proc = Fcdr (Fcar (tail)); if (XTYPE (proc) == Lisp_Process && EQ (XPROCESS (proc)->buffer, buf)) return proc; } return Qnil; } /* This is how commands for the user decode process arguments. It accepts a process, a process name, a buffer, a buffer name, or nil. Buffers denote the first process in the buffer, and nil denotes the current buffer. */ static Lisp_Object get_process (name) register Lisp_Object name; { register Lisp_Object proc; if (NILP (name)) proc = Fget_buffer_process (Fcurrent_buffer ()); else { proc = Fget_process (name); if (NILP (proc)) proc = Fget_buffer_process (Fget_buffer (name)); } if (!NILP (proc)) return proc; if (NILP (name)) error ("Current buffer has no process"); else error ("Process %s does not exist", XSTRING (name)->data); /* NOTREACHED */ } DEFUN ("delete-process", Fdelete_process, Sdelete_process, 1, 1, 0, "Delete PROCESS: kill it and forget about it immediately.\n\ PROCESS may be a process, a buffer, the name of a process or buffer, or\n\ nil, indicating the current buffer's process.") (proc) register Lisp_Object proc; { proc = get_process (proc); XPROCESS (proc)->raw_status_low = Qnil; XPROCESS (proc)->raw_status_high = Qnil; if (NETCONN_P (proc)) { XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (0), Qnil)); XSETINT (XPROCESS (proc)->tick, ++process_tick); } else if (XINT (XPROCESS (proc)->infd) >= 0) { Fkill_process (proc, Qnil); /* Do this now, since remove_process will make sigchld_handler do nothing. */ XPROCESS (proc)->status = Fcons (Qsignal, Fcons (make_number (SIGKILL), Qnil)); XSETINT (XPROCESS (proc)->tick, ++process_tick); status_notify (); } remove_process (proc); return Qnil; } DEFUN ("process-status", Fprocess_status, Sprocess_status, 1, 1, 0, "Return the status of PROCESS: a symbol, one of these:\n\ run -- for a process that is running.\n\ stop -- for a process stopped but continuable.\n\ exit -- for a process that has exited.\n\ signal -- for a process that has got a fatal signal.\n\ open -- for a network stream connection that is open.\n\ closed -- for a network stream connection that is closed.\n\ nil -- if arg is a process name and no such process exists.\n\ PROCESS may be a process, a buffer, the name of a process or buffer, or\n\ nil, indicating the current buffer's process.") (proc) register Lisp_Object proc; { register struct Lisp_Process *p; register Lisp_Object status; proc = get_process (proc); if (NILP (proc)) return proc; p = XPROCESS (proc); if (!NILP (p->raw_status_low)) update_status (p); status = p->status; if (XTYPE (status) == Lisp_Cons) status = XCONS (status)->car; if (NETCONN_P (proc)) { if (EQ (status, Qrun)) status = Qopen; else if (EQ (status, Qexit)) status = Qclosed; } return status; } DEFUN ("process-exit-status", Fprocess_exit_status, Sprocess_exit_status, 1, 1, 0, "Return the exit status of PROCESS or the signal number that killed it.\n\ If PROCESS has not yet exited or died, return 0.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); if (!NILP (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (XTYPE (XPROCESS (proc)->status) == Lisp_Cons) return XCONS (XCONS (XPROCESS (proc)->status)->cdr)->car; return make_number (0); } DEFUN ("process-id", Fprocess_id, Sprocess_id, 1, 1, 0, "Return the process id of PROCESS.\n\ This is the pid of the Unix process which PROCESS uses or talks to.\n\ For a network connection, this value is nil.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->pid; } DEFUN ("process-name", Fprocess_name, Sprocess_name, 1, 1, 0, "Return the name of PROCESS, as a string.\n\ This is the name of the program invoked in PROCESS,\n\ possibly modified to make it unique among process names.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->name; } DEFUN ("process-command", Fprocess_command, Sprocess_command, 1, 1, 0, "Return the command that was executed to start PROCESS.\n\ This is a list of strings, the first string being the program executed\n\ and the rest of the strings being the arguments given to it.\n\ For a non-child channel, this is nil.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->command; } DEFUN ("set-process-buffer", Fset_process_buffer, Sset_process_buffer, 2, 2, 0, "Set buffer associated with PROCESS to BUFFER (a buffer, or nil).") (proc, buffer) register Lisp_Object proc, buffer; { CHECK_PROCESS (proc, 0); if (!NILP (buffer)) CHECK_BUFFER (buffer, 1); XPROCESS (proc)->buffer = buffer; return buffer; } DEFUN ("process-buffer", Fprocess_buffer, Sprocess_buffer, 1, 1, 0, "Return the buffer PROCESS is associated with.\n\ Output from PROCESS is inserted in this buffer\n\ unless PROCESS has a filter.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->buffer; } DEFUN ("process-mark", Fprocess_mark, Sprocess_mark, 1, 1, 0, "Return the marker for the end of the last output from PROCESS.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->mark; } DEFUN ("set-process-filter", Fset_process_filter, Sset_process_filter, 2, 2, 0, "Give PROCESS the filter function FILTER; nil means no filter.\n\ t means stop accepting output from the process.\n\ When a process has a filter, each time it does output\n\ the entire string of output is passed to the filter.\n\ The filter gets two arguments: the process and the string of output.\n\ If the process has a filter, its buffer is not used for output.") (proc, filter) register Lisp_Object proc, filter; { CHECK_PROCESS (proc, 0); if (EQ (filter, Qt)) FD_CLR (XINT (XPROCESS (proc)->infd), &input_wait_mask); else if (EQ (XPROCESS (proc)->filter, Qt)) FD_SET (XINT (XPROCESS (proc)->infd), &input_wait_mask); XPROCESS (proc)->filter = filter; return filter; } DEFUN ("process-filter", Fprocess_filter, Sprocess_filter, 1, 1, 0, "Returns the filter function of PROCESS; nil if none.\n\ See `set-process-filter' for more info on filter functions.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->filter; } DEFUN ("set-process-sentinel", Fset_process_sentinel, Sset_process_sentinel, 2, 2, 0, "Give PROCESS the sentinel SENTINEL; nil for none.\n\ The sentinel is called as a function when the process changes state.\n\ It gets two arguments: the process, and a string describing the change.") (proc, sentinel) register Lisp_Object proc, sentinel; { CHECK_PROCESS (proc, 0); XPROCESS (proc)->sentinel = sentinel; return sentinel; } DEFUN ("process-sentinel", Fprocess_sentinel, Sprocess_sentinel, 1, 1, 0, "Return the sentinel of PROCESS; nil if none.\n\ See `set-process-sentinel' for more info on sentinels.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->sentinel; } DEFUN ("process-kill-without-query", Fprocess_kill_without_query, Sprocess_kill_without_query, 1, 2, 0, "Say no query needed if PROCESS is running when Emacs is exited.\n\ Optional second argument if non-nill says to require a query.\n\ Value is t if a query was formerly required.") (proc, value) register Lisp_Object proc, value; { Lisp_Object tem; CHECK_PROCESS (proc, 0); tem = XPROCESS (proc)->kill_without_query; XPROCESS (proc)->kill_without_query = Fnull (value); return Fnull (tem); } #if 0 /* Turned off because we don't currently record this info in the process. Perhaps add it. */ DEFUN ("process-connection", Fprocess_connection, Sprocess_connection, 1, 1, 0, "Return the connection type of `PROCESS'.\n\ The value is `nil' for a pipe,\n\ `t' or `pty' for a pty, or `stream' for a socket connection.") (process) Lisp_Object process; { return XPROCESS (process)->type; } #endif Lisp_Object list_processes_1 () { register Lisp_Object tail, tem; Lisp_Object proc, minspace, tem1; register struct buffer *old = current_buffer; register struct Lisp_Process *p; register int state; char tembuf[80]; XFASTINT (minspace) = 1; set_buffer_internal (XBUFFER (Vstandard_output)); Fbuffer_disable_undo (Vstandard_output); current_buffer->truncate_lines = Qt; write_string ("\ Proc Status Buffer Command\n\ ---- ------ ------ -------\n", -1); for (tail = Vprocess_alist; !NILP (tail); tail = Fcdr (tail)) { Lisp_Object symbol; proc = Fcdr (Fcar (tail)); p = XPROCESS (proc); if (NILP (p->childp)) continue; Finsert (1, &p->name); Findent_to (make_number (13), minspace); if (!NILP (p->raw_status_low)) update_status (p); symbol = p->status; if (XTYPE (p->status) == Lisp_Cons) symbol = XCONS (p->status)->car; if (EQ (symbol, Qsignal)) { Lisp_Object tem; tem = Fcar (Fcdr (p->status)); #ifdef VMS if (XINT (tem) < NSIG) write_string (sys_errlist [XINT (tem)], -1); else #endif Fprinc (symbol, Qnil); } else if (NETCONN_P (proc)) { if (EQ (symbol, Qrun)) write_string ("open", -1); else if (EQ (symbol, Qexit)) write_string ("closed", -1); else Fprinc (symbol, Qnil); } else Fprinc (symbol, Qnil); if (EQ (symbol, Qexit)) { Lisp_Object tem; tem = Fcar (Fcdr (p->status)); if (XFASTINT (tem)) { sprintf (tembuf, " %d", XFASTINT (tem)); write_string (tembuf, -1); } } if (EQ (symbol, Qsignal) || EQ (symbol, Qexit)) remove_process (proc); Findent_to (make_number (22), minspace); if (NILP (p->buffer)) insert_string ("(none)"); else if (NILP (XBUFFER (p->buffer)->name)) insert_string ("(Killed)"); else Finsert (1, &XBUFFER (p->buffer)->name); Findent_to (make_number (37), minspace); if (NETCONN_P (proc)) { sprintf (tembuf, "(network stream connection to %s)\n", XSTRING (p->childp)->data); insert_string (tembuf); } else { tem = p->command; while (1) { tem1 = Fcar (tem); Finsert (1, &tem1); tem = Fcdr (tem); if (NILP (tem)) break; insert_string (" "); } insert_string ("\n"); } } return Qnil; } DEFUN ("list-processes", Flist_processes, Slist_processes, 0, 0, "", "Display a list of all processes.\n\ \(Any processes listed as Exited or Signaled are actually eliminated\n\ after the listing is made.)") () { internal_with_output_to_temp_buffer ("*Process List*", list_processes_1, Qnil); return Qnil; } DEFUN ("process-list", Fprocess_list, Sprocess_list, 0, 0, 0, "Return a list of all processes.") () { return Fmapcar (Qcdr, Vprocess_alist); } /* Starting asynchronous inferior processes. */ static Lisp_Object start_process_unwind (); DEFUN ("start-process", Fstart_process, Sstart_process, 3, MANY, 0, "Start a program in a subprocess. Return the process object for it.\n\ Args are NAME BUFFER PROGRAM &rest PROGRAM-ARGS\n\ NAME is name for process. It is modified if necessary to make it unique.\n\ BUFFER is the buffer or (buffer-name) to associate with the process.\n\ Process output goes at end of that buffer, unless you specify\n\ an output stream or filter function to handle the output.\n\ BUFFER may be also nil, meaning that this process is not associated\n\ with any buffer\n\ Third arg is program file name. It is searched for as in the shell.\n\ Remaining arguments are strings to give program as arguments.") (nargs, args) int nargs; register Lisp_Object *args; { Lisp_Object buffer, name, program, proc, current_dir, tem; #ifdef VMS register unsigned char *new_argv; int len; #else register unsigned char **new_argv; #endif register int i; int count = specpdl_ptr - specpdl; buffer = args[1]; if (!NILP (buffer)) buffer = Fget_buffer_create (buffer); /* Make sure that the child will be able to chdir to the current buffer's current directory, or its unhandled equivalent. We can't just have the child check for an error when it does the chdir, since it's in a vfork. We have to GCPRO around this because Fexpand_file_name and Funhandled_file_name_directory might call a file name handling function. The argument list is protected by the caller, so all we really have to worry about is buffer. */ { struct gcpro gcpro1, gcpro2; current_dir = current_buffer->directory; GCPRO2 (buffer, current_dir); current_dir = expand_and_dir_to_file (Funhandled_file_name_directory (current_dir), Qnil); if (NILP (Ffile_accessible_directory_p (current_dir))) report_file_error ("Setting current directory", Fcons (current_buffer->directory, Qnil)); UNGCPRO; } name = args[0]; CHECK_STRING (name, 0); program = args[2]; CHECK_STRING (program, 2); #ifdef VMS /* Make a one member argv with all args concatenated together separated by a blank. */ len = XSTRING (program)->size + 2; for (i = 3; i < nargs; i++) { tem = args[i]; CHECK_STRING (tem, i); len += XSTRING (tem)->size + 1; /* count the blank */ } new_argv = (unsigned char *) alloca (len); strcpy (new_argv, XSTRING (program)->data); for (i = 3; i < nargs; i++) { tem = args[i]; CHECK_STRING (tem, i); strcat (new_argv, " "); strcat (new_argv, XSTRING (tem)->data); } /* Need to add code here to check for program existence on VMS */ #else /* not VMS */ new_argv = (unsigned char **) alloca ((nargs - 1) * sizeof (char *)); for (i = 3; i < nargs; i++) { tem = args[i]; CHECK_STRING (tem, i); new_argv[i - 2] = XSTRING (tem)->data; } new_argv[i - 2] = 0; new_argv[0] = XSTRING (program)->data; /* If program file name is not absolute, search our path for it */ if (new_argv[0][0] != '/') { tem = Qnil; openp (Vexec_path, program, EXEC_SUFFIXES, &tem, 1); if (NILP (tem)) report_file_error ("Searching for program", Fcons (program, Qnil)); new_argv[0] = XSTRING (tem)->data; } #endif /* not VMS */ proc = make_process (name); /* If an error occurs and we can't start the process, we want to remove it from the process list. This means that each error check in create_process doesn't need to call remove_process itself; it's all taken care of here. */ record_unwind_protect (start_process_unwind, proc); XPROCESS (proc)->childp = Qt; XPROCESS (proc)->command_channel_p = Qnil; XPROCESS (proc)->buffer = buffer; XPROCESS (proc)->sentinel = Qnil; XPROCESS (proc)->filter = Qnil; XPROCESS (proc)->command = Flist (nargs - 2, args + 2); create_process (proc, new_argv, current_dir); return unbind_to (count, proc); } /* This function is the unwind_protect form for Fstart_process. If PROC doesn't have its pid set, then we know someone has signalled an error and the process wasn't started successfully, so we should remove it from the process list. */ static Lisp_Object start_process_unwind (proc) Lisp_Object proc; { if (XTYPE (proc) != Lisp_Process) abort (); /* Was PROC started successfully? */ if (XINT (XPROCESS (proc)->pid) <= 0) remove_process (proc); return Qnil; } SIGTYPE create_process_1 (signo) int signo; { #ifdef USG /* USG systems forget handlers when they are used; must reestablish each time */ signal (signo, create_process_1); #endif /* USG */ } #if 0 /* This doesn't work; see the note before sigchld_handler. */ #ifdef USG #ifdef SIGCHLD /* Mimic blocking of signals on system V, which doesn't really have it. */ /* Nonzero means we got a SIGCHLD when it was supposed to be blocked. */ int sigchld_deferred; SIGTYPE create_process_sigchld () { signal (SIGCHLD, create_process_sigchld); sigchld_deferred = 1; } #endif #endif #endif #ifndef VMS /* VMS version of this function is in vmsproc.c. */ create_process (process, new_argv, current_dir) Lisp_Object process; char **new_argv; Lisp_Object current_dir; { int pid, inchannel, outchannel, forkin, forkout; int sv[2]; #ifdef SIGCHLD SIGTYPE (*sigchld)(); #endif int pty_flag = 0; extern char **environ; inchannel = outchannel = -1; #ifdef HAVE_PTYS if (EQ (Vprocess_connection_type, Qt)) outchannel = inchannel = allocate_pty (); if (inchannel >= 0) { #ifndef USG /* On USG systems it does not work to open the pty's tty here and then close and reopen it in the child. */ #ifdef O_NOCTTY /* Don't let this terminal become our controlling terminal (in case we don't have one). */ forkout = forkin = open (pty_name, O_RDWR | O_NOCTTY, 0); #else forkout = forkin = open (pty_name, O_RDWR, 0); #endif if (forkin < 0) report_file_error ("Opening pty", Qnil); #else forkin = forkout = -1; #endif /* not USG */ pty_flag = 1; } else #endif /* HAVE_PTYS */ #ifdef SKTPAIR { if (socketpair (AF_UNIX, SOCK_STREAM, 0, sv) < 0) report_file_error ("Opening socketpair", Qnil); outchannel = inchannel = sv[0]; forkout = forkin = sv[1]; } #else /* not SKTPAIR */ { pipe (sv); inchannel = sv[0]; forkout = sv[1]; pipe (sv); outchannel = sv[1]; forkin = sv[0]; } #endif /* not SKTPAIR */ #if 0 /* Replaced by close_process_descs */ set_exclusive_use (inchannel); set_exclusive_use (outchannel); #endif /* Stride people say it's a mystery why this is needed as well as the O_NDELAY, but that it fails without this. */ #if defined (STRIDE) || (defined (pfa) && defined (HAVE_PTYS)) { int one = 1; ioctl (inchannel, FIONBIO, &one); } #endif #ifdef O_NONBLOCK fcntl (inchannel, F_SETFL, O_NONBLOCK); #else #ifdef O_NDELAY fcntl (inchannel, F_SETFL, O_NDELAY); #endif #endif /* Record this as an active process, with its channels. As a result, child_setup will close Emacs's side of the pipes. */ chan_process[inchannel] = process; XSET (XPROCESS (process)->infd, Lisp_Int, inchannel); XSET (XPROCESS (process)->outfd, Lisp_Int, outchannel); /* Record the tty descriptor used in the subprocess. */ if (forkin < 0) XPROCESS (process)->subtty = Qnil; else XFASTINT (XPROCESS (process)->subtty) = forkin; XPROCESS (process)->pty_flag = (pty_flag ? Qt : Qnil); XPROCESS (process)->status = Qrun; /* Delay interrupts until we have a chance to store the new fork's pid in its process structure */ #ifdef SIGCHLD #ifdef BSD4_1 sighold (SIGCHLD); #else /* not BSD4_1 */ #if defined (BSD) || defined (UNIPLUS) || defined (HPUX) sigsetmask (sigmask (SIGCHLD)); #else /* ordinary USG */ #if 0 sigchld_deferred = 0; sigchld = signal (SIGCHLD, create_process_sigchld); #endif #endif /* ordinary USG */ #endif /* not BSD4_1 */ #endif /* SIGCHLD */ /* Until we store the proper pid, enable sigchld_handler to recognize an unknown pid as standing for this process. It is very important not to let this `marker' value stay in the table after this function has returned; if it does it might cause call-process to hang and subsequent asynchronous processes to get their return values scrambled. */ XSETINT (XPROCESS (process)->pid, -1); { /* child_setup must clobber environ on systems with true vfork. Protect it from permanent change. */ char **save_environ = environ; pid = vfork (); if (pid == 0) { int xforkin = forkin; int xforkout = forkout; #if 0 /* This was probably a mistake--it duplicates code later on, but fails to handle all the cases. */ /* Make sure SIGCHLD is not blocked in the child. */ sigsetmask (SIGEMPTYMASK); #endif /* Make the pty be the controlling terminal of the process. */ #ifdef HAVE_PTYS /* First, disconnect its current controlling terminal. */ #ifdef HAVE_SETSID setsid (); #ifdef TIOCSCTTY /* Make the pty's terminal the controlling terminal. */ if (pty_flag) /* We ignore the return value because faith@cs.unc.edu says that is necessary on Linux. */ ioctl (xforkin, TIOCSCTTY, 0); #endif #else /* not HAVE_SETSID */ #ifdef USG /* It's very important to call setpgrp here and no time afterwards. Otherwise, we lose our controlling tty which is set when we open the pty. */ setpgrp (); #endif /* USG */ #endif /* not HAVE_SETSID */ #ifdef NTTYDISC if (pty_flag) { /* Use new line discipline. */ int ldisc = NTTYDISC; if (ioctl (xforkin, TIOCSETD, &ldisc) < 0) write (1, "create_process/TIOCSETD failed\n", 31); } #endif #ifdef TIOCNOTTY /* In 4.3BSD, the TIOCSPGRP bug has been fixed, and now you can do TIOCSPGRP only to the process's controlling tty. */ if (pty_flag) { /* I wonder: would just ioctl (0, TIOCNOTTY, 0) work here? I can't test it since I don't have 4.3. */ int j = open ("/dev/tty", O_RDWR, 0); ioctl (j, TIOCNOTTY, 0); close (j); #ifndef USG /* In order to get a controlling terminal on some versions of BSD, it is necessary to put the process in pgrp 0 before it opens the terminal. */ setpgrp (0, 0); #endif } #endif /* TIOCNOTTY */ #if !defined (RTU) && !defined (UNIPLUS) /*** There is a suggestion that this ought to be a conditional on TIOCSPGRP. */ /* Now close the pty (if we had it open) and reopen it. This makes the pty the controlling terminal of the subprocess. */ if (pty_flag) { #ifdef SET_CHILD_PTY_PGRP int pgrp = getpid (); #endif /* I wonder if close (open (pty_name, ...)) would work? */ if (xforkin >= 0) close (xforkin); xforkout = xforkin = open (pty_name, O_RDWR, 0); #ifdef SET_CHILD_PTY_PGRP ioctl (xforkin, TIOCSPGRP, &pgrp); ioctl (xforkout, TIOCSPGRP, &pgrp); #endif if (xforkin < 0) abort (); } #endif /* not UNIPLUS and not RTU */ #ifdef SETUP_SLAVE_PTY SETUP_SLAVE_PTY; #endif /* SETUP_SLAVE_PTY */ #ifdef AIX /* On AIX, we've disabled SIGHUP above once we start a child on a pty. Now reenable it in the child, so it will die when we want it to. */ if (pty_flag) signal (SIGHUP, SIG_DFL); #endif #endif /* HAVE_PTYS */ #ifdef SIGCHLD #ifdef BSD4_1 sigrelse (SIGCHLD); #else /* not BSD4_1 */ #if defined (BSD) || defined (UNIPLUS) || defined (HPUX) sigsetmask (SIGEMPTYMASK); #else /* ordinary USG */ #if 0 signal (SIGCHLD, sigchld); #endif #endif /* ordinary USG */ #endif /* not BSD4_1 */ #endif /* SIGCHLD */ child_setup_tty (xforkout); child_setup (xforkin, xforkout, xforkout, new_argv, 1, current_dir); } environ = save_environ; } if (pid < 0) report_file_error ("Doing vfork", Qnil); XFASTINT (XPROCESS (process)->pid) = pid; FD_SET (inchannel, &input_wait_mask); /* If the subfork execv fails, and it exits, this close hangs. I don't know why. So have an interrupt jar it loose. */ stop_polling (); signal (SIGALRM, create_process_1); alarm (1); XPROCESS (process)->subtty = Qnil; if (forkin >= 0) close (forkin); alarm (0); start_polling (); if (forkin != forkout && forkout >= 0) close (forkout); #ifdef SIGCHLD #ifdef BSD4_1 sigrelse (SIGCHLD); #else /* not BSD4_1 */ #if defined (BSD) || defined (UNIPLUS) || defined (HPUX) sigsetmask (SIGEMPTYMASK); #else /* ordinary USG */ #if 0 signal (SIGCHLD, sigchld); /* Now really handle any of these signals that came in during this function. */ if (sigchld_deferred) kill (getpid (), SIGCHLD); #endif #endif /* ordinary USG */ #endif /* not BSD4_1 */ #endif /* SIGCHLD */ } #endif /* not VMS */ #ifdef HAVE_SOCKETS /* open a TCP network connection to a given HOST/SERVICE. Treated exactly like a normal process when reading and writing. Only differences are in status display and process deletion. A network connection has no PID; you cannot signal it. All you can do is deactivate and close it via delete-process */ DEFUN ("open-network-stream", Fopen_network_stream, Sopen_network_stream, 4, 4, 0, "Open a TCP connection for a service to a host.\n\ Returns a subprocess-object to represent the connection.\n\ Input and output work as for subprocesses; `delete-process' closes it.\n\ Args are NAME BUFFER HOST SERVICE.\n\ NAME is name for process. It is modified if necessary to make it unique.\n\ BUFFER is the buffer (or buffer-name) to associate with the process.\n\ Process output goes at end of that buffer, unless you specify\n\ an output stream or filter function to handle the output.\n\ BUFFER may be also nil, meaning that this process is not associated\n\ with any buffer\n\ Third arg is name of the host to connect to, or its IP address.\n\ Fourth arg SERVICE is name of the service desired, or an integer\n\ specifying a port number to connect to.") (name, buffer, host, service) Lisp_Object name, buffer, host, service; { Lisp_Object proc; register int i; struct sockaddr_in address; struct servent *svc_info; struct hostent *host_info_ptr, host_info; char *(addr_list[2]); IN_ADDR numeric_addr; int s, outch, inch; char errstring[80]; int port; struct hostent host_info_fixed; struct gcpro gcpro1, gcpro2, gcpro3, gcpro4; GCPRO4 (name, buffer, host, service); CHECK_STRING (name, 0); CHECK_STRING (host, 0); if (XTYPE(service) == Lisp_Int) port = htons ((unsigned short) XINT (service)); else { CHECK_STRING (service, 0); svc_info = getservbyname (XSTRING (service)->data, "tcp"); if (svc_info == 0) error ("Unknown service \"%s\"", XSTRING (service)->data); port = svc_info->s_port; } #ifndef TERM host_info_ptr = gethostbyname (XSTRING (host)->data); if (host_info_ptr == 0) /* Attempt to interpret host as numeric inet address */ { numeric_addr = inet_addr ((char *) XSTRING (host)->data); if (NUMERIC_ADDR_ERROR) error ("Unknown host \"%s\"", XSTRING (host)->data); host_info_ptr = &host_info; host_info.h_name = 0; host_info.h_aliases = 0; host_info.h_addrtype = AF_INET; #ifdef h_addr /* Older machines have only one address slot called h_addr. Newer machines have h_addr_list, but #define h_addr to be its first element. */ host_info.h_addr_list = &(addr_list[0]); #endif host_info.h_addr = (char*)(&numeric_addr); addr_list[1] = 0; host_info.h_length = strlen (addr_list[0]); } bzero (&address, sizeof address); bcopy (host_info_ptr->h_addr, (char *) &address.sin_addr, host_info_ptr->h_length); address.sin_family = host_info_ptr->h_addrtype; address.sin_port = port; s = socket (host_info_ptr->h_addrtype, SOCK_STREAM, 0); if (s < 0) report_file_error ("error creating socket", Fcons (name, Qnil)); /* Kernel bugs (on Ultrix at least) cause lossage (not just EINTR) when connect is interrupted. So let's not let it get interrupted. Note we do not turn off polling, because polling is only used when not interrupt_input, and thus not normally used on the systems which have this bug. On systems which use polling, there's no way to quit if polling is turned off. */ if (interrupt_input) unrequest_sigio (); loop: if (connect (s, (struct sockaddr *) &address, sizeof address) == -1) { int xerrno = errno; if (errno == EINTR) goto loop; close (s); if (interrupt_input) request_sigio (); errno = xerrno; report_file_error ("connection failed", Fcons (host, Fcons (name, Qnil))); } if (interrupt_input) request_sigio (); #else /* TERM */ s = connect_server (0); if (s < 0) report_file_error ("error creating socket", Fcons (name, Qnil)); send_command (s, C_PORT, 0, "%s:%d", XSTRING (host)->data, ntohs (port)); send_command (s, C_DUMB, 1, 0); #endif /* TERM */ inch = s; outch = dup (s); if (outch < 0) report_file_error ("error duplicating socket", Fcons (name, Qnil)); if (!NILP (buffer)) buffer = Fget_buffer_create (buffer); proc = make_process (name); chan_process[inch] = proc; #ifdef O_NONBLOCK fcntl (inch, F_SETFL, O_NONBLOCK); #else #ifdef O_NDELAY fcntl (inch, F_SETFL, O_NDELAY); #endif #endif XPROCESS (proc)->childp = host; XPROCESS (proc)->command_channel_p = Qnil; XPROCESS (proc)->buffer = buffer; XPROCESS (proc)->sentinel = Qnil; XPROCESS (proc)->filter = Qnil; XPROCESS (proc)->command = Qnil; XPROCESS (proc)->pid = Qnil; XSET (XPROCESS (proc)->infd, Lisp_Int, s); XSET (XPROCESS (proc)->outfd, Lisp_Int, outch); XPROCESS (proc)->status = Qrun; FD_SET (inch, &input_wait_mask); UNGCPRO; return proc; } #endif /* HAVE_SOCKETS */ deactivate_process (proc) Lisp_Object proc; { register int inchannel, outchannel; register struct Lisp_Process *p = XPROCESS (proc); inchannel = XINT (p->infd); outchannel = XINT (p->outfd); if (inchannel >= 0) { /* Beware SIGCHLD hereabouts. */ flush_pending_output (inchannel); #ifdef VMS { VMS_PROC_STUFF *get_vms_process_pointer (), *vs; sys$dassgn (outchannel); vs = get_vms_process_pointer (p->pid); if (vs) give_back_vms_process_stuff (vs); } #else close (inchannel); if (outchannel >= 0 && outchannel != inchannel) close (outchannel); #endif XSET (p->infd, Lisp_Int, -1); XSET (p->outfd, Lisp_Int, -1); chan_process[inchannel] = Qnil; FD_CLR (inchannel, &input_wait_mask); } } /* Close all descriptors currently in use for communication with subprocess. This is used in a newly-forked subprocess to get rid of irrelevant descriptors. */ close_process_descs () { int i; for (i = 0; i < MAXDESC; i++) { Lisp_Object process; process = chan_process[i]; if (!NILP (process)) { int in = XINT (XPROCESS (process)->infd); int out = XINT (XPROCESS (process)->outfd); if (in >= 0) close (in); if (out >= 0 && in != out) close (out); } } } DEFUN ("accept-process-output", Faccept_process_output, Saccept_process_output, 0, 3, 0, "Allow any pending output from subprocesses to be read by Emacs.\n\ It is read into the process' buffers or given to their filter functions.\n\ Non-nil arg PROCESS means do not return until some output has been received\n\ from PROCESS.\n\ Non-nil second arg TIMEOUT and third arg TIMEOUT-MSECS are number of\n\ seconds and microseconds to wait; return after that much time whether\n\ or not there is input.\n\ Return non-nil iff we received any output before the timeout expired.") (proc, timeout, timeout_msecs) register Lisp_Object proc, timeout, timeout_msecs; { int seconds; int useconds; if (! NILP (timeout_msecs)) { CHECK_NUMBER (timeout_msecs, 2); useconds = XINT (timeout_msecs); if (XTYPE (timeout) != Lisp_Int) XSET (timeout, Lisp_Int, 0); { int carry = useconds / 1000000; XSETINT (timeout, XINT (timeout) + carry); useconds -= carry * 1000000; /* I think this clause is necessary because C doesn't guarantee a particular rounding direction for negative integers. */ if (useconds < 0) { XSETINT (timeout, XINT (timeout) - 1); useconds += 1000000; } } } else useconds = 0; if (! NILP (timeout)) { CHECK_NUMBER (timeout, 1); seconds = XINT (timeout); if (seconds <= 0) seconds = -1; } else { if (NILP (proc)) seconds = -1; else seconds = 0; } if (NILP (proc)) XFASTINT (proc) = 0; return (wait_reading_process_input (seconds, useconds, proc, 0) ? Qt : Qnil); } /* This variable is different from waiting_for_input in keyboard.c. It is used to communicate to a lisp process-filter/sentinel (via the function Fwaiting_for_user_input_p below) whether emacs was waiting for user-input when that process-filter was called. waiting_for_input cannot be used as that is by definition 0 when lisp code is being evalled */ static int waiting_for_user_input_p; /* Read and dispose of subprocess output while waiting for timeout to elapse and/or keyboard input to be available. TIME_LIMIT is: timeout in seconds, or zero for no limit, or -1 means gobble data immediately available but don't wait for any. MICROSECS is: an additional duration to wait, measured in microseconds. If this is nonzero and time_limit is 0, then the timeout consists of MICROSECS only. READ_KBD is a lisp value: 0 to ignore keyboard input, or 1 to return when input is available, or -1 meaning caller will actually read the input, so don't throw to the quit handler, or a cons cell, meaning wait wait until its car is non-nil (and gobble terminal input into the buffer if any arrives), or a process object, meaning wait until something arrives from that process. The return value is true iff we read some input from that process. DO_DISPLAY != 0 means redisplay should be done to show subprocess output that arrives. If READ_KBD is a pointer to a struct Lisp_Process, then the function returns true iff we received input from that process before the timeout elapsed. Otherwise, return true iff we received input from any process. */ wait_reading_process_input (time_limit, microsecs, read_kbd, do_display) int time_limit, microsecs; Lisp_Object read_kbd; int do_display; { register int channel, nfds, m; static SELECT_TYPE Available; int xerrno; Lisp_Object proc; EMACS_TIME timeout, end_time, garbage; SELECT_TYPE Atemp; int wait_channel = -1; struct Lisp_Process *wait_proc = 0; int got_some_input = 0; Lisp_Object *wait_for_cell = 0; FD_ZERO (&Available); /* If read_kbd is a process to watch, set wait_proc and wait_channel accordingly. */ if (XTYPE (read_kbd) == Lisp_Process) { wait_proc = XPROCESS (read_kbd); wait_channel = XINT (wait_proc->infd); XFASTINT (read_kbd) = 0; } /* If waiting for non-nil in a cell, record where. */ if (XTYPE (read_kbd) == Lisp_Cons) { wait_for_cell = &XCONS (read_kbd)->car; XFASTINT (read_kbd) = 0; } waiting_for_user_input_p = XINT (read_kbd); /* Since we may need to wait several times, compute the absolute time to return at. */ if (time_limit || microsecs) { EMACS_GET_TIME (end_time); EMACS_SET_SECS_USECS (timeout, time_limit, microsecs); EMACS_ADD_TIME (end_time, end_time, timeout); } /* It would not be safe to call this below, where we call redisplay_preserve_echo_area. */ prepare_menu_bars (); while (1) { /* If calling from keyboard input, do not quit since we want to return C-g as an input character. Otherwise, do pending quit if requested. */ if (XINT (read_kbd) >= 0) QUIT; /* Exit now if the cell we're waiting for became non-nil. */ if (wait_for_cell && ! NILP (*wait_for_cell)) break; /* Compute time from now till when time limit is up */ /* Exit if already run out */ if (time_limit == -1) { /* -1 specified for timeout means gobble output available now but don't wait at all. */ EMACS_SET_SECS_USECS (timeout, 0, 0); } else if (time_limit || microsecs) { EMACS_GET_TIME (timeout); EMACS_SUB_TIME (timeout, end_time, timeout); if (EMACS_TIME_NEG_P (timeout)) break; } else { EMACS_SET_SECS_USECS (timeout, 100000, 0); } /* Cause C-g and alarm signals to take immediate action, and cause input available signals to zero out timeout. It is important that we do this before checking for process activity. If we get a SIGCHLD after the explicit checks for process activity, timeout is the only way we will know. */ if (XINT (read_kbd) < 0) set_waiting_for_input (&timeout); /* If status of something has changed, and no input is available, notify the user of the change right away. After this explicit check, we'll let the SIGCHLD handler zap timeout to get our attention. */ if (update_tick != process_tick && do_display) { Atemp = input_wait_mask; EMACS_SET_SECS_USECS (timeout, 0, 0); if (select (MAXDESC, &Atemp, 0, 0, &timeout) <= 0) { /* It's okay for us to do this and then continue with the loop, since timeout has already been zeroed out. */ clear_waiting_for_input (); status_notify (); } } /* Don't wait for output from a non-running process. */ if (wait_proc != 0 && !NILP (wait_proc->raw_status_low)) update_status (wait_proc); if (wait_proc != 0 && ! EQ (wait_proc->status, Qrun)) { clear_waiting_for_input (); break; } /* Wait till there is something to do */ Available = input_wait_mask; /* We used to have && wait_for_cell == 0 but that led to lossage handling selection_request events: within one, we would start to handle another. */ if (! XINT (read_kbd)) FD_CLR (keyboard_descriptor, &Available); /* If frame size has changed or the window is newly mapped, redisplay now, before we start to wait. There is a race condition here; if a SIGIO arrives between now and the select and indicates that a frame is trashed, the select may block displaying a trashed screen. */ if (frame_garbaged) redisplay_preserve_echo_area (); if (XINT (read_kbd) && detect_input_pending ()) { nfds = 0; FD_ZERO (&Available); } else nfds = select (MAXDESC, &Available, 0, 0, &timeout); xerrno = errno; /* Make C-g and alarm signals set flags again */ clear_waiting_for_input (); /* If we woke up due to SIGWINCH, actually change size now. */ do_pending_window_change (); if (time_limit && nfds == 0) /* timeout elapsed */ break; if (nfds < 0) { if (xerrno == EINTR) FD_ZERO (&Available); #ifdef ultrix /* Ultrix select seems to return ENOMEM when it is interrupted. Treat it just like EINTR. Bleah. Note that we want to test for the "ultrix" CPP symbol, not "__ultrix__"; the latter is only defined under GCC, but not by DEC's bundled CC. -JimB */ else if (xerrno == ENOMEM) FD_ZERO (&Available); #endif #ifdef ALLIANT /* This happens for no known reason on ALLIANT. I am guessing that this is the right response. -- RMS. */ else if (xerrno == EFAULT) FD_ZERO (&Available); #endif else if (xerrno == EBADF) { #ifdef AIX /* AIX doesn't handle PTY closure the same way BSD does. On AIX, the child's closure of the pts gives the parent a SIGHUP, and the ptc file descriptor is automatically closed, yielding EBADF here or at select() call above. So, SIGHUP is ignored (see def of PTY_TTY_NAME_SPRINTF in m/ibmrt-aix.h), and here we just ignore the select error. Cleanup occurs c/o status_notify after SIGCLD. */ FD_ZERO (&Available); /* Cannot depend on values returned */ #else abort (); #endif } else error("select error: %s", strerror (xerrno)); } #if defined(sun) && !defined(USG5_4) else if (nfds > 0 && FD_ISSET (keyboard_descriptor, &Available) && interrupt_input) /* System sometimes fails to deliver SIGIO. David J. Mackenzie says that Emacs doesn't compile under Solaris if this code is enabled, thus the USG5_4 in the CPP conditional. "I haven't noticed any ill effects so far. If you find a Solaris expert somewhere, they might know better." */ kill (getpid (), SIGIO); #endif /* Check for keyboard input */ /* If there is any, return immediately to give it higher priority than subprocesses */ /* We used to do his if wait_for_cell, but that caused infinite recursion in selection request events. */ if ((XINT (read_kbd)) && detect_input_pending ()) { swallow_events (); if (detect_input_pending ()) break; } /* Exit now if the cell we're waiting for became non-nil. */ if (wait_for_cell && ! NILP (*wait_for_cell)) break; #ifdef SIGIO /* If we think we have keyboard input waiting, but didn't get SIGIO go read it. This can happen with X on BSD after logging out. In that case, there really is no input and no SIGIO, but select says there is input. */ if (XINT (read_kbd) && interrupt_input && (FD_ISSET (keyboard_descriptor, &Available))) kill (0, SIGIO); #endif if (! wait_proc) got_some_input |= nfds > 0; /* If checking input just got us a size-change event from X, obey it now if we should. */ if (XINT (read_kbd) || wait_for_cell) do_pending_window_change (); /* Check for data from a process. */ /* Really FIRST_PROC_DESC should be 0 on Unix, but this is safer in the short run. */ for (channel = keyboard_descriptor == 0 ? FIRST_PROC_DESC : 0; channel < MAXDESC; channel++) { if (FD_ISSET (channel, &Available)) { int nread; /* If waiting for this channel, arrange to return as soon as no more input to be processed. No more waiting. */ if (wait_channel == channel) { wait_channel = -1; time_limit = -1; got_some_input = 1; } proc = chan_process[channel]; if (NILP (proc)) continue; /* Read data from the process, starting with our buffered-ahead character if we have one. */ nread = read_process_output (proc, channel); if (nread > 0) { /* Since read_process_output can run a filter, which can call accept-process-output, don't try to read from any other processes before doing the select again. */ FD_ZERO (&Available); if (do_display) redisplay_preserve_echo_area (); } #ifdef EWOULDBLOCK else if (nread == -1 && errno == EWOULDBLOCK) ; #else #ifdef O_NONBLOCK else if (nread == -1 && errno == EAGAIN) ; #else #ifdef O_NDELAY else if (nread == -1 && errno == EAGAIN) ; /* Note that we cannot distinguish between no input available now and a closed pipe. With luck, a closed pipe will be accompanied by subprocess termination and SIGCHLD. */ else if (nread == 0 && !NETCONN_P (proc)) ; #endif /* O_NDELAY */ #endif /* O_NONBLOCK */ #endif /* EWOULDBLOCK */ #ifdef HAVE_PTYS /* On some OSs with ptys, when the process on one end of a pty exits, the other end gets an error reading with errno = EIO instead of getting an EOF (0 bytes read). Therefore, if we get an error reading and errno = EIO, just continue, because the child process has exited and should clean itself up soon (e.g. when we get a SIGCHLD). */ else if (nread == -1 && errno == EIO) ; #endif /* HAVE_PTYS */ /* If we can detect process termination, don't consider the process gone just because its pipe is closed. */ #ifdef SIGCHLD else if (nread == 0 && !NETCONN_P (proc)) ; #endif else { /* Preserve status of processes already terminated. */ XSETINT (XPROCESS (proc)->tick, ++process_tick); deactivate_process (proc); if (!NILP (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (EQ (XPROCESS (proc)->status, Qrun)) XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (256), Qnil)); } } } /* end for each file descriptor */ } /* end while exit conditions not met */ /* If calling from keyboard input, do not quit since we want to return C-g as an input character. Otherwise, do pending quit if requested. */ if (XINT (read_kbd) >= 0) { /* Prevent input_pending from remaining set if we quit. */ clear_input_pending (); QUIT; } return got_some_input; } /* Read pending output from the process channel, starting with our buffered-ahead character if we have one. Yield number of characters read. This function reads at most 1024 characters. If you want to read all available subprocess output, you must call it repeatedly until it returns zero. */ read_process_output (proc, channel) Lisp_Object proc; register int channel; { register int nchars; #ifdef VMS char *chars; #else char chars[1024]; #endif register Lisp_Object outstream; register struct buffer *old = current_buffer; register struct Lisp_Process *p = XPROCESS (proc); register int opoint; #ifdef VMS VMS_PROC_STUFF *vs, *get_vms_process_pointer(); vs = get_vms_process_pointer (p->pid); if (vs) { if (!vs->iosb[0]) return(0); /* Really weird if it does this */ if (!(vs->iosb[0] & 1)) return -1; /* I/O error */ } else error ("Could not get VMS process pointer"); chars = vs->inputBuffer; nchars = clean_vms_buffer (chars, vs->iosb[1]); if (nchars <= 0) { start_vms_process_read (vs); /* Crank up the next read on the process */ return 1; /* Nothing worth printing, say we got 1 */ } #else /* not VMS */ if (proc_buffered_char[channel] < 0) nchars = read (channel, chars, sizeof chars); else { chars[0] = proc_buffered_char[channel]; proc_buffered_char[channel] = -1; nchars = read (channel, chars + 1, sizeof chars - 1); if (nchars < 0) nchars = 1; else nchars = nchars + 1; } #endif /* not VMS */ if (nchars <= 0) return nchars; outstream = p->filter; if (!NILP (outstream)) { /* We inhibit quit here instead of just catching it so that hitting ^G when a filter happens to be running won't screw it up. */ int count = specpdl_ptr - specpdl; Lisp_Object odeactivate; odeactivate = Vdeactivate_mark; specbind (Qinhibit_quit, Qt); call2 (outstream, proc, make_string (chars, nchars)); /* Handling the process output should not deactivate the mark. */ Vdeactivate_mark = odeactivate; #ifdef VMS start_vms_process_read (vs); #endif unbind_to (count, Qnil); return nchars; } /* If no filter, write into buffer if it isn't dead. */ if (!NILP (p->buffer) && !NILP (XBUFFER (p->buffer)->name)) { Lisp_Object old_read_only; Lisp_Object old_begv, old_zv; Lisp_Object odeactivate; odeactivate = Vdeactivate_mark; Fset_buffer (p->buffer); opoint = point; old_read_only = current_buffer->read_only; XFASTINT (old_begv) = BEGV; XFASTINT (old_zv) = ZV; current_buffer->read_only = Qnil; /* Insert new output into buffer at the current end-of-output marker, thus preserving logical ordering of input and output. */ if (XMARKER (p->mark)->buffer) SET_PT (clip_to_bounds (BEGV, marker_position (p->mark), ZV)); else SET_PT (ZV); /* If the output marker is outside of the visible region, save the restriction and widen. */ if (! (BEGV <= point && point <= ZV)) Fwiden (); /* Make sure opoint floats ahead of any new text, just as point would. */ if (point <= opoint) opoint += nchars; /* Insert after old_begv, but before old_zv. */ if (point < XFASTINT (old_begv)) XFASTINT (old_begv) += nchars; if (point <= XFASTINT (old_zv)) XFASTINT (old_zv) += nchars; /* Insert before markers in case we are inserting where the buffer's mark is, and the user's next command is Meta-y. */ insert_before_markers (chars, nchars); Fset_marker (p->mark, make_number (point), p->buffer); update_mode_lines++; /* If the restriction isn't what it should be, set it. */ if (XFASTINT (old_begv) != BEGV || XFASTINT (old_zv) != ZV) Fnarrow_to_region (old_begv, old_zv); /* Handling the process output should not deactivate the mark. */ Vdeactivate_mark = odeactivate; current_buffer->read_only = old_read_only; SET_PT (opoint); set_buffer_internal (old); } #ifdef VMS start_vms_process_read (vs); #endif return nchars; } DEFUN ("waiting-for-user-input-p", Fwaiting_for_user_input_p, Swaiting_for_user_input_p, 0, 0, 0, "Returns non-NIL if emacs is waiting for input from the user.\n\ This is intended for use by asynchronous process output filters and sentinels.") () { return ((waiting_for_user_input_p) ? Qt : Qnil); } /* Sending data to subprocess */ jmp_buf send_process_frame; SIGTYPE send_process_trap () { #ifdef BSD4_1 sigrelse (SIGPIPE); sigrelse (SIGALRM); #endif /* BSD4_1 */ longjmp (send_process_frame, 1); } send_process (proc, buf, len) Lisp_Object proc; char *buf; int len; { /* Don't use register vars; longjmp can lose them. */ int rv; unsigned char *procname = XSTRING (XPROCESS (proc)->name)->data; #ifdef VMS struct Lisp_Process *p = XPROCESS (proc); VMS_PROC_STUFF *vs, *get_vms_process_pointer(); #endif /* VMS */ if (! NILP (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (! EQ (XPROCESS (proc)->status, Qrun)) error ("Process %s not running", procname); #ifdef VMS vs = get_vms_process_pointer (p->pid); if (vs == 0) error ("Could not find this process: %x", p->pid); else if (write_to_vms_process (vs, buf, len)) ; #else if (!setjmp (send_process_frame)) while (len > 0) { int this = len; SIGTYPE (*old_sigpipe)(); /* Don't send more than 500 bytes at a time. */ if (this > 500) this = 500; old_sigpipe = (SIGTYPE (*) ()) signal (SIGPIPE, send_process_trap); rv = write (XINT (XPROCESS (proc)->outfd), buf, this); signal (SIGPIPE, old_sigpipe); if (rv < 0) { if (0 #ifdef EWOULDBLOCK || errno == EWOULDBLOCK #endif #ifdef EAGAIN || errno == EAGAIN #endif ) { /* It would be nice to accept process output here, but that is difficult. For example, it could garbage what we are sending if that is from a buffer. */ immediate_quit = 1; QUIT; sleep (1); immediate_quit = 0; continue; } report_file_error ("writing to process", Fcons (proc, Qnil)); } buf += rv; len -= rv; /* Allow input from processes between bursts of sending. Otherwise things may get stopped up. */ if (len > 0) { Lisp_Object zero; XFASTINT (zero) = 0; wait_reading_process_input (-1, 0, zero, 0); } } #endif else { XPROCESS (proc)->raw_status_low = Qnil; XPROCESS (proc)->raw_status_high = Qnil; XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (256), Qnil)); XSETINT (XPROCESS (proc)->tick, ++process_tick); deactivate_process (proc); #ifdef VMS error ("Error writing to process %s; closed it", procname); #else error ("SIGPIPE raised on process %s; closed it", procname); #endif } } DEFUN ("process-send-region", Fprocess_send_region, Sprocess_send_region, 3, 3, 0, "Send current contents of region as input to PROCESS.\n\ PROCESS may be a process, a buffer, the name of a process or buffer, or\n\ nil, indicating the current buffer's process.\n\ Called from program, takes three arguments, PROCESS, START and END.\n\ If the region is more than 500 characters long,\n\ it is sent in several bunches. This may happen even for shorter regions.\n\ Output from processes can arrive in between bunches.") (process, start, end) Lisp_Object process, start, end; { Lisp_Object proc; int start1; proc = get_process (process); validate_region (&start, &end); if (XINT (start) < GPT && XINT (end) > GPT) move_gap (start); start1 = XINT (start); send_process (proc, &FETCH_CHAR (start1), XINT (end) - XINT (start)); return Qnil; } DEFUN ("process-send-string", Fprocess_send_string, Sprocess_send_string, 2, 2, 0, "Send PROCESS the contents of STRING as input.\n\ PROCESS may be a process, a buffer, the name of a process or buffer, or\n\ nil, indicating the current buffer's process.\n\ If STRING is more than 500 characters long,\n\ it is sent in several bunches. This may happen even for shorter strings.\n\ Output from processes can arrive in between bunches.") (process, string) Lisp_Object process, string; { Lisp_Object proc; CHECK_STRING (string, 1); proc = get_process (process); send_process (proc, XSTRING (string)->data, XSTRING (string)->size); return Qnil; } /* send a signal number SIGNO to PROCESS. CURRENT_GROUP means send to the process group that currently owns the terminal being used to communicate with PROCESS. This is used for various commands in shell mode. If NOMSG is zero, insert signal-announcements into process's buffers right away. If we can, we try to signal PROCESS by sending control characters down the pipe. This allows us to signal inferiors who have changed their uid, for which killpg would return an EPERM error. */ static void process_send_signal (process, signo, current_group, nomsg) Lisp_Object process; int signo; Lisp_Object current_group; int nomsg; { Lisp_Object proc; register struct Lisp_Process *p; int gid; int no_pgrp = 0; proc = get_process (process); p = XPROCESS (proc); if (!EQ (p->childp, Qt)) error ("Process %s is not a subprocess", XSTRING (p->name)->data); if (XINT (p->infd) < 0) error ("Process %s is not active", XSTRING (p->name)->data); if (NILP (p->pty_flag)) current_group = Qnil; /* If we are using pgrps, get a pgrp number and make it negative. */ if (!NILP (current_group)) { #ifdef SIGNALS_VIA_CHARACTERS /* If possible, send signals to the entire pgrp by sending an input character to it. */ /* TERMIOS is the latest and bestest, and seems most likely to work. If the system has it, use it. */ #ifdef HAVE_TERMIOS struct termios t; switch (signo) { case SIGINT: tcgetattr (XINT (p->infd), &t); send_process (proc, &t.c_cc[VINTR], 1); return; case SIGQUIT: tcgetattr (XINT (p->infd), &t); send_process (proc, &t.c_cc[VQUIT], 1); return; case SIGTSTP: tcgetattr (XINT (p->infd), &t); #if defined (VSWTCH) && !defined (IRIX5) send_process (proc, &t.c_cc[VSWTCH], 1); #else send_process (proc, &t.c_cc[VSUSP], 1); #endif return; } #else /* ! HAVE_TERMIOS */ /* On Berkeley descendants, the following IOCTL's retrieve the current control characters. */ #if defined (TIOCGLTC) && defined (TIOCGETC) struct tchars c; struct ltchars lc; switch (signo) { case SIGINT: ioctl (XINT (p->infd), TIOCGETC, &c); send_process (proc, &c.t_intrc, 1); return; case SIGQUIT: ioctl (XINT (p->infd), TIOCGETC, &c); send_process (proc, &c.t_quitc, 1); return; #ifdef SIGTSTP case SIGTSTP: ioctl (XINT (p->infd), TIOCGLTC, &lc); send_process (proc, &lc.t_suspc, 1); return; #endif /* ! defined (SIGTSTP) */ } #else /* ! defined (TIOCGLTC) && defined (TIOCGETC) */ /* On SYSV descendants, the TCGETA ioctl retrieves the current control characters. */ #ifdef TCGETA struct termio t; switch (signo) { case SIGINT: ioctl (XINT (p->infd), TCGETA, &t); send_process (proc, &t.c_cc[VINTR], 1); return; case SIGQUIT: ioctl (XINT (p->infd), TCGETA, &t); send_process (proc, &t.c_cc[VQUIT], 1); return; #ifdef SIGTSTP case SIGTSTP: ioctl (XINT (p->infd), TCGETA, &t); send_process (proc, &t.c_cc[VSWTCH], 1); return; #endif /* ! defined (SIGTSTP) */ } #else /* ! defined (TCGETA) */ Your configuration files are messed up. /* If your system configuration files define SIGNALS_VIA_CHARACTERS, you'd better be using one of the alternatives above! */ #endif /* ! defined (TCGETA) */ #endif /* ! defined (TIOCGLTC) && defined (TIOCGETC) */ #endif /* ! defined HAVE_TERMIOS */ #endif /* ! defined (SIGNALS_VIA_CHARACTERS) */ #ifdef TIOCGPGRP /* Get the pgrp using the tty itself, if we have that. Otherwise, use the pty to get the pgrp. On pfa systems, saka@pfu.fujitsu.co.JP writes: "TIOCGPGRP symbol defined in sys/ioctl.h at E50. But, TIOCGPGRP does not work on E50 ;-P works fine on E60" His patch indicates that if TIOCGPGRP returns an error, then we should just assume that p->pid is also the process group id. */ { int err; if (!NILP (p->subtty)) err = ioctl (XFASTINT (p->subtty), TIOCGPGRP, &gid); else err = ioctl (XINT (p->infd), TIOCGPGRP, &gid); #ifdef pfa if (err == -1) gid = - XFASTINT (p->pid); #endif /* ! defined (pfa) */ } if (gid == -1) no_pgrp = 1; else gid = - gid; #else /* ! defined (TIOCGPGRP ) */ /* Can't select pgrps on this system, so we know that the child itself heads the pgrp. */ gid = - XFASTINT (p->pid); #endif /* ! defined (TIOCGPGRP ) */ } else gid = - XFASTINT (p->pid); switch (signo) { #ifdef SIGCONT case SIGCONT: p->raw_status_low = Qnil; p->raw_status_high = Qnil; p->status = Qrun; XSETINT (p->tick, ++process_tick); if (!nomsg) status_notify (); break; #endif /* ! defined (SIGCONT) */ case SIGINT: #ifdef VMS send_process (proc, "\003", 1); /* ^C */ goto whoosh; #endif case SIGQUIT: #ifdef VMS send_process (proc, "\031", 1); /* ^Y */ goto whoosh; #endif case SIGKILL: #ifdef VMS sys$forcex (&(XFASTINT (p->pid)), 0, 1); whoosh: #endif flush_pending_output (XINT (p->infd)); break; } /* If we don't have process groups, send the signal to the immediate subprocess. That isn't really right, but it's better than any obvious alternative. */ if (no_pgrp) { kill (XFASTINT (p->pid), signo); return; } /* gid may be a pid, or minus a pgrp's number */ #ifdef TIOCSIGSEND if (!NILP (current_group)) ioctl (XINT (p->infd), TIOCSIGSEND, signo); else { gid = - XFASTINT (p->pid); kill (gid, signo); } #else /* ! defined (TIOCSIGSEND) */ EMACS_KILLPG (-gid, signo); #endif /* ! defined (TIOCSIGSEND) */ } DEFUN ("interrupt-process", Finterrupt_process, Sinterrupt_process, 0, 2, 0, "Interrupt process PROCESS. May be process or name of one.\n\ PROCESS may be a process, a buffer, or the name of a process or buffer.\n\ Nil or no arg means current buffer's process.\n\ Second arg CURRENT-GROUP non-nil means send signal to\n\ the current process-group of the process's controlling terminal\n\ rather than to the process's own process group.\n\ If the process is a shell, this means interrupt current subjob\n\ rather than the shell.") (process, current_group) Lisp_Object process, current_group; { process_send_signal (process, SIGINT, current_group, 0); return process; } DEFUN ("kill-process", Fkill_process, Skill_process, 0, 2, 0, "Kill process PROCESS. May be process or name of one.\n\ See function `interrupt-process' for more details on usage.") (process, current_group) Lisp_Object process, current_group; { process_send_signal (process, SIGKILL, current_group, 0); return process; } DEFUN ("quit-process", Fquit_process, Squit_process, 0, 2, 0, "Send QUIT signal to process PROCESS. May be process or name of one.\n\ See function `interrupt-process' for more details on usage.") (process, current_group) Lisp_Object process, current_group; { process_send_signal (process, SIGQUIT, current_group, 0); return process; } DEFUN ("stop-process", Fstop_process, Sstop_process, 0, 2, 0, "Stop process PROCESS. May be process or name of one.\n\ See function `interrupt-process' for more details on usage.") (process, current_group) Lisp_Object process, current_group; { #ifndef SIGTSTP error ("no SIGTSTP support"); #else process_send_signal (process, SIGTSTP, current_group, 0); #endif return process; } DEFUN ("continue-process", Fcontinue_process, Scontinue_process, 0, 2, 0, "Continue process PROCESS. May be process or name of one.\n\ See function `interrupt-process' for more details on usage.") (process, current_group) Lisp_Object process, current_group; { #ifdef SIGCONT process_send_signal (process, SIGCONT, current_group, 0); #else error ("no SIGCONT support"); #endif return process; } DEFUN ("signal-process", Fsignal_process, Ssignal_process, 2, 2, "nProcess number: \nnSignal code: ", "Send the process with number PID the signal with code CODE.\n\ Both PID and CODE are integers.") (pid, sig) Lisp_Object pid, sig; { CHECK_NUMBER (pid, 0); CHECK_NUMBER (sig, 1); return make_number (kill (XINT (pid), XINT (sig))); } DEFUN ("process-send-eof", Fprocess_send_eof, Sprocess_send_eof, 0, 1, 0, "Make PROCESS see end-of-file in its input.\n\ Eof comes after any text already sent to it.\n\ PROCESS may be a process, a buffer, the name of a process or buffer, or\n\ nil, indicating the current buffer's process.") (process) Lisp_Object process; { Lisp_Object proc; proc = get_process (process); /* Make sure the process is really alive. */ if (! NILP (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (! EQ (XPROCESS (proc)->status, Qrun)) error ("Process %s not running", XSTRING (XPROCESS (proc)->name)->data); /* Sending a zero-length record is supposed to mean eof when TIOCREMOTE is turned on. */ #ifdef DID_REMOTE { char buf[1]; write (XINT (XPROCESS (proc)->outfd), buf, 0); } #else /* did not do TOICREMOTE */ #ifdef VMS send_process (proc, "\032", 1); /* ^z */ #else if (!NILP (XPROCESS (proc)->pty_flag)) send_process (proc, "\004", 1); else { close (XINT (XPROCESS (proc)->outfd)); XSET (XPROCESS (proc)->outfd, Lisp_Int, open (NULL_DEVICE, O_WRONLY)); } #endif /* VMS */ #endif /* did not do TOICREMOTE */ return process; } /* Kill all processes associated with `buffer'. If `buffer' is nil, kill all processes */ kill_buffer_processes (buffer) Lisp_Object buffer; { Lisp_Object tail, proc; for (tail = Vprocess_alist; XGCTYPE (tail) == Lisp_Cons; tail = XCONS (tail)->cdr) { proc = XCONS (XCONS (tail)->car)->cdr; if (XGCTYPE (proc) == Lisp_Process && (NILP (buffer) || EQ (XPROCESS (proc)->buffer, buffer))) { if (NETCONN_P (proc)) deactivate_process (proc); else if (XINT (XPROCESS (proc)->infd) >= 0) process_send_signal (proc, SIGHUP, Qnil, 1); } } } /* On receipt of a signal that a child status has changed, loop asking about children with changed statuses until the system says there are no more. All we do is change the status; we do not run sentinels or print notifications. That is saved for the next time keyboard input is done, in order to avoid timing errors. */ /** WARNING: this can be called during garbage collection. Therefore, it must not be fooled by the presence of mark bits in Lisp objects. */ /** USG WARNING: Although it is not obvious from the documentation in signal(2), on a USG system the SIGCLD handler MUST NOT call signal() before executing at least one wait(), otherwise the handler will be called again, resulting in an infinite loop. The relevant portion of the documentation reads "SIGCLD signals will be queued and the signal-catching function will be continually reentered until the queue is empty". Invoking signal() causes the kernel to reexamine the SIGCLD queue. Fred Fish, UniSoft Systems Inc. */ SIGTYPE sigchld_handler (signo) int signo; { int old_errno = errno; Lisp_Object proc; register struct Lisp_Process *p; extern EMACS_TIME *input_available_clear_time; #ifdef BSD4_1 extern int sigheld; sigheld |= sigbit (SIGCHLD); #endif while (1) { register int pid; WAITTYPE w; Lisp_Object tail; #ifdef WNOHANG #ifndef WUNTRACED #define WUNTRACED 0 #endif /* no WUNTRACED */ /* Keep trying to get a status until we get a definitive result. */ do { errno = 0; pid = wait3 (&w, WNOHANG | WUNTRACED, 0); } while (pid <= 0 && errno == EINTR); if (pid <= 0) { /* A real failure. We have done all our job, so return. */ /* USG systems forget handlers when they are used; must reestablish each time */ #ifdef USG signal (signo, sigchld_handler); /* WARNING - must come after wait3() */ #endif #ifdef BSD4_1 sigheld &= ~sigbit (SIGCHLD); sigrelse (SIGCHLD); #endif errno = old_errno; return; } #else pid = wait (&w); #endif /* no WNOHANG */ /* Find the process that signaled us, and record its status. */ p = 0; for (tail = Vprocess_alist; XSYMBOL (tail) != XSYMBOL (Qnil); tail = XCONS (tail)->cdr) { proc = XCONS (XCONS (tail)->car)->cdr; p = XPROCESS (proc); if (EQ (p->childp, Qt) && XFASTINT (p->pid) == pid) break; p = 0; } /* Look for an asynchronous process whose pid hasn't been filled in yet. */ if (p == 0) for (tail = Vprocess_alist; XSYMBOL (tail) != XSYMBOL (Qnil); tail = XCONS (tail)->cdr) { proc = XCONS (XCONS (tail)->car)->cdr; p = XPROCESS (proc); if (XTYPE (p->pid) == Lisp_Int && XINT (p->pid) == -1) break; p = 0; } /* Change the status of the process that was found. */ if (p != 0) { union { int i; WAITTYPE wt; } u; XSETINT (p->tick, ++process_tick); u.wt = w; XFASTINT (p->raw_status_low) = u.i & 0xffff; XFASTINT (p->raw_status_high) = u.i >> 16; /* If process has terminated, stop waiting for its output. */ if (WIFSIGNALED (w) || WIFEXITED (w)) if (XINT (p->infd) >= 0) FD_CLR (XINT (p->infd), &input_wait_mask); /* Tell wait_reading_process_input that it needs to wake up and look around. */ if (input_available_clear_time) EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0); } /* There was no asynchronous process found for that id. Check if we have a synchronous process. */ else { synch_process_alive = 0; /* Report the status of the synchronous process. */ if (WIFEXITED (w)) synch_process_retcode = WRETCODE (w); else if (WIFSIGNALED (w)) { int code = WTERMSIG (w); char *signame = 0; if (code < NSIG) { #ifndef VMS signame = sys_siglist[code]; #else signame = sys_errlist[code]; #endif } if (signame == 0) signame = "unknown"; synch_process_death = signame; } /* Tell wait_reading_process_input that it needs to wake up and look around. */ if (input_available_clear_time) EMACS_SET_SECS_USECS (*input_available_clear_time, 0, 0); } /* On some systems, we must return right away. If any more processes want to signal us, we will get another signal. Otherwise (on systems that have WNOHANG), loop around to use up all the processes that have something to tell us. */ #if defined (USG) && ! (defined (HPUX) && defined (WNOHANG)) #ifdef USG signal (signo, sigchld_handler); #endif errno = old_errno; return; #endif /* USG, but not HPUX with WNOHANG */ } } static Lisp_Object exec_sentinel_unwind (data) Lisp_Object data; { XPROCESS (XCONS (data)->car)->sentinel = XCONS (data)->cdr; return Qnil; } static void exec_sentinel (proc, reason) Lisp_Object proc, reason; { Lisp_Object sentinel; register struct Lisp_Process *p = XPROCESS (proc); int count = specpdl_ptr - specpdl; sentinel = p->sentinel; if (NILP (sentinel)) return; /* Zilch the sentinel while it's running, to avoid recursive invocations; assure that it gets restored no matter how the sentinel exits. */ p->sentinel = Qnil; record_unwind_protect (exec_sentinel_unwind, Fcons (proc, sentinel)); /* Inhibit quit so that random quits don't screw up a running filter. */ specbind (Qinhibit_quit, Qt); call2 (sentinel, proc, reason); unbind_to (count, Qnil); } /* Report all recent events of a change in process status (either run the sentinel or output a message). This is done while Emacs is waiting for keyboard input. */ status_notify () { register Lisp_Object proc, buffer; Lisp_Object tail = Qnil; Lisp_Object msg = Qnil; struct gcpro gcpro1, gcpro2; /* We need to gcpro tail; if read_process_output calls a filter which deletes a process and removes the cons to which tail points from Vprocess_alist, and then causes a GC, tail is an unprotected reference. */ GCPRO2 (tail, msg); for (tail = Vprocess_alist; !NILP (tail); tail = Fcdr (tail)) { Lisp_Object symbol; register struct Lisp_Process *p; proc = Fcdr (Fcar (tail)); p = XPROCESS (proc); if (XINT (p->tick) != XINT (p->update_tick)) { XSETINT (p->update_tick, XINT (p->tick)); /* If process is still active, read any output that remains. */ if (XINT (p->infd) >= 0) while (! EQ (p->filter, Qt) && read_process_output (proc, XINT (p->infd)) > 0); buffer = p->buffer; /* Get the text to use for the message. */ if (!NILP (p->raw_status_low)) update_status (p); msg = status_message (p->status); /* If process is terminated, deactivate it or delete it. */ symbol = p->status; if (XTYPE (p->status) == Lisp_Cons) symbol = XCONS (p->status)->car; if (EQ (symbol, Qsignal) || EQ (symbol, Qexit) || EQ (symbol, Qclosed)) { if (delete_exited_processes) remove_process (proc); else deactivate_process (proc); } /* Now output the message suitably. */ if (!NILP (p->sentinel)) exec_sentinel (proc, msg); /* Don't bother with a message in the buffer when a process becomes runnable. */ else if (!EQ (symbol, Qrun) && !NILP (buffer)) { Lisp_Object ro = XBUFFER (buffer)->read_only; Lisp_Object tem; struct buffer *old = current_buffer; int opoint; /* Avoid error if buffer is deleted (probably that's why the process is dead, too) */ if (NILP (XBUFFER (buffer)->name)) continue; Fset_buffer (buffer); opoint = point; /* Insert new output into buffer at the current end-of-output marker, thus preserving logical ordering of input and output. */ if (XMARKER (p->mark)->buffer) SET_PT (marker_position (p->mark)); else SET_PT (ZV); if (point <= opoint) opoint += XSTRING (msg)->size + XSTRING (p->name)->size + 10; tem = current_buffer->read_only; current_buffer->read_only = Qnil; insert_string ("\nProcess "); Finsert (1, &p->name); insert_string (" "); Finsert (1, &msg); current_buffer->read_only = tem; Fset_marker (p->mark, make_number (point), p->buffer); SET_PT (opoint); set_buffer_internal (old); } } } /* end for */ update_mode_lines++; /* in case buffers use %s in mode-line-format */ redisplay_preserve_echo_area (); update_tick = process_tick; UNGCPRO; } init_process () { register int i; #ifdef SIGCHLD #ifndef CANNOT_DUMP if (! noninteractive || initialized) #endif signal (SIGCHLD, sigchld_handler); #endif FD_ZERO (&input_wait_mask); keyboard_descriptor = 0; FD_SET (keyboard_descriptor, &input_wait_mask); Vprocess_alist = Qnil; for (i = 0; i < MAXDESC; i++) { chan_process[i] = Qnil; proc_buffered_char[i] = -1; } } /* From now on, assume keyboard input comes from descriptor DESC. */ void change_keyboard_wait_descriptor (desc) int desc; { FD_CLR (keyboard_descriptor, &input_wait_mask); keyboard_descriptor = desc; FD_SET (keyboard_descriptor, &input_wait_mask); } syms_of_process () { #ifdef HAVE_SOCKETS stream_process = intern ("stream"); #endif Qprocessp = intern ("processp"); staticpro (&Qprocessp); Qrun = intern ("run"); staticpro (&Qrun); Qstop = intern ("stop"); staticpro (&Qstop); Qsignal = intern ("signal"); staticpro (&Qsignal); /* Qexit is already staticpro'd by syms_of_eval; don't staticpro it here again. Qexit = intern ("exit"); staticpro (&Qexit); */ Qopen = intern ("open"); staticpro (&Qopen); Qclosed = intern ("closed"); staticpro (&Qclosed); staticpro (&Vprocess_alist); DEFVAR_BOOL ("delete-exited-processes", &delete_exited_processes, "*Non-nil means delete processes immediately when they exit.\n\ nil means don't delete them until `list-processes' is run."); delete_exited_processes = 1; DEFVAR_LISP ("process-connection-type", &Vprocess_connection_type, "Control type of device used to communicate with subprocesses.\n\ Values are nil to use a pipe, and t or 'pty for a pty. Note that if\n\ pty's are not available, this variable will be ignored. The value takes\n\ effect when `start-process' is called."); Vprocess_connection_type = Qt; defsubr (&Sprocessp); defsubr (&Sget_process); defsubr (&Sget_buffer_process); defsubr (&Sdelete_process); defsubr (&Sprocess_status); defsubr (&Sprocess_exit_status); defsubr (&Sprocess_id); defsubr (&Sprocess_name); defsubr (&Sprocess_command); defsubr (&Sset_process_buffer); defsubr (&Sprocess_buffer); defsubr (&Sprocess_mark); defsubr (&Sset_process_filter); defsubr (&Sprocess_filter); defsubr (&Sset_process_sentinel); defsubr (&Sprocess_sentinel); defsubr (&Sprocess_kill_without_query); defsubr (&Slist_processes); defsubr (&Sprocess_list); defsubr (&Sstart_process); #ifdef HAVE_SOCKETS defsubr (&Sopen_network_stream); #endif /* HAVE_SOCKETS */ defsubr (&Saccept_process_output); defsubr (&Sprocess_send_region); defsubr (&Sprocess_send_string); defsubr (&Sinterrupt_process); defsubr (&Skill_process); defsubr (&Squit_process); defsubr (&Sstop_process); defsubr (&Scontinue_process); defsubr (&Sprocess_send_eof); defsubr (&Ssignal_process); defsubr (&Swaiting_for_user_input_p); /* defsubr (&Sprocess_connection); */ } #else /* not subprocesses */ #include <sys/types.h> #include <errno.h> #include "lisp.h" #include "systime.h" #include "termopts.h" extern int frame_garbaged; /* As described above, except assuming that there are no subprocesses: Wait for timeout to elapse and/or keyboard input to be available. time_limit is: timeout in seconds, or zero for no limit, or -1 means gobble data immediately available but don't wait for any. read_kbd is a Lisp_Object: 0 to ignore keyboard input, or 1 to return when input is available, or -1 means caller will actually read the input, so don't throw to the quit handler. We know that read_kbd will never be a Lisp_Process, since `subprocesses' isn't defined. do_display != 0 means redisplay should be done to show subprocess output that arrives. This version of the function ignores it. Return true iff we received input from any process. */ int wait_reading_process_input (time_limit, microsecs, read_kbd, do_display) int time_limit, microsecs; Lisp_Object read_kbd; int do_display; { EMACS_TIME end_time, timeout, *timeout_p; int waitchannels; /* What does time_limit really mean? */ if (time_limit || microsecs) { /* It's not infinite. */ timeout_p = &timeout; if (time_limit == -1) /* In fact, it's zero. */ EMACS_SET_SECS_USECS (timeout, 0, 0); else EMACS_SET_SECS_USECS (timeout, time_limit, microsecs); /* How far in the future is that? */ EMACS_GET_TIME (end_time); EMACS_ADD_TIME (end_time, end_time, timeout); } else /* It's infinite. */ timeout_p = 0; /* This must come before stop_polling. */ prepare_menu_bars (); /* Turn off periodic alarms (in case they are in use) because the select emulator uses alarms. */ stop_polling (); for (;;) { int nfds; waitchannels = XINT (read_kbd) ? 1 : 0; /* If calling from keyboard input, do not quit since we want to return C-g as an input character. Otherwise, do pending quit if requested. */ if (XINT (read_kbd) >= 0) QUIT; if (timeout_p) { EMACS_GET_TIME (*timeout_p); EMACS_SUB_TIME (*timeout_p, end_time, *timeout_p); if (EMACS_TIME_NEG_P (*timeout_p)) break; } /* Cause C-g and alarm signals to take immediate action, and cause input available signals to zero out timeout. */ if (XINT (read_kbd) < 0) set_waiting_for_input (&timeout); /* If a frame has been newly mapped and needs updating, reprocess its display stuff. */ if (frame_garbaged) redisplay_preserve_echo_area (); if (XINT (read_kbd) && detect_input_pending ()) nfds = 0; else nfds = select (1, &waitchannels, 0, 0, timeout_p); /* Make C-g and alarm signals set flags again */ clear_waiting_for_input (); /* If we woke up due to SIGWINCH, actually change size now. */ do_pending_window_change (); if (nfds == -1) { /* If the system call was interrupted, then go around the loop again. */ if (errno == EINTR) waitchannels = 0; } #ifdef sun else if (nfds > 0 && (waitchannels & 1) && interrupt_input) /* System sometimes fails to deliver SIGIO. */ kill (getpid (), SIGIO); #endif #ifdef SIGIO if (XINT (read_kbd) && interrupt_input && (waitchannels & 1)) kill (0, SIGIO); #endif /* If we have timed out (nfds == 0) or found some input (nfds > 0), we should exit. */ if (nfds >= 0) break; } start_polling (); return 0; } DEFUN ("get-buffer-process", Fget_buffer_process, Sget_buffer_process, 1, 1, 0, /* Don't confused make-docfile by having two doc strings for this function. make-docfile does not pay attention to #if, for good reason! */ 0) (name) register Lisp_Object name; { return Qnil; } /* Kill all processes associated with `buffer'. If `buffer' is nil, kill all processes. Since we have no subprocesses, this does nothing. */ kill_buffer_processes (buffer) Lisp_Object buffer; { } init_process () { } syms_of_process () { defsubr (&Sget_buffer_process); } #endif /* not subprocesses */