Mercurial > emacs
view etc/echo.msg @ 111161:7cae32037c1d
verilog-mode.el updates.
This file should be copied to the trunk verbatim.
* verilog-mode.el (verilog-directive-re): Make this variable
auto-built for efficiency of execution and updating.
(verilog-extended-complete-re): Support 'pure' fucntion & task
declarations (these have no bodies).
(verilog-beg-of-statement): general cleanup to enable support of
'pure' fucntion & task declarations (these have no bodies). These
efforts together fix Verilog bug210 from veripool; which was also
noticed by Steve Pearlmutter.
(verilog-directive-re, verilog-directive-begin, verilog-indent-re)
(verilog-directive-nest-re, verilog-set-auto-endcomments): Support
`elsif. Reported by Shankar Giri.
(verilog-forward-ws&directives, verilog-in-attribute-p): Fixes for
attribute handling for lining up declarations and assignments.
(verilog-beg-of-statement-1): Fix issue where continued declaration
is indented differently if it is after a begin..end clock.
(verilog-in-attribute-p, verilog-skip-backward-comments)
(verilog-skip-forward-comment-p): Support proper treatment of
attributes by indent code. Reported by Jeff Steele.
(verilog-in-directive-p): Fix comment to correctly describe
function.
(verilog-backward-up-list, verilog-in-struct-region-p)
(verilog-backward-token, verilog-in-struct-p)
(verilog-in-coverage-p, verilog-do-indent)
(verilog-pretty-declarations): Use verilog-backward-up-list as
wrapper around backward-up-list inorder to properly skip comments.
Reported by David Rogoff.
(verilog-property-re, verilog-endcomment-reason-re)
(verilog-beg-of-statement, verilog-set-auto-endcomments)
(verilog-calc-1 ): Fix for assert a; else b; indentation (new form
of if). Reported by Max Bjurling and
(verilog-calc-1): Fix for clocking block in modport
declaration. Reported by Brian Hunter.
* verilog-mode.el (verilog-auto-inst, verilog-gate-ios)
(verilog-gate-keywords, verilog-read-sub-decls)
(verilog-read-sub-decls-gate, verilog-read-sub-decls-gate-ios)
(verilog-read-sub-decls-line, verilog-read-sub-decls-sig): Support
AUTOINST for gate primitives, bug284. Reported by Mark Johnson.
(verilog-read-decls): Fix spaces in V2K module parameters causing
mis-identification as interfaces, bug287.
(verilog-read-decls): Fix not treating "parameter string" as a
parameter in AUTOINSTPARAM.
(verilog-read-always-signals-recurse, verilog-read-decls): Fix not
treating `elsif similar to `endif inside AUTOSENSE.
(verilog-do-indent): Implement correct automatic or static task or
function end comment highlight. Reported by Steve Pearlmutter.
(verilog-font-lock-keywords-2): Fix highlighting of single
character pins, bug264. Reported by Michael Laajanen.
(verilog-auto-inst, verilog-read-decls, verilog-read-sub-decls)
(verilog-read-sub-decls-in-interfaced, verilog-read-sub-decls-sig)
(verilog-subdecls-get-interfaced, verilog-subdecls-new): Support
interfaces with AUTOINST, bug270. Reported by Luis Gutierrez.
(verilog-pretty-expr): Fix interactive arguments, bug272. Reported
by Mark Johnson.
(verilog-auto-tieoff, verilog-auto-tieoff-ignore-regexp): Add
'verilog-auto-tieoff-ignore-regexp' for AUTOTIEOFF,
bug269. Suggested by Gary Delp.
(verilog-mode-map, verilog-preprocess, verilog-preprocess-history)
(verilog-preprocessor, verilog-set-compile-command): Create
verilog-preprocess and verilog-preprocessor to show preprocessed
output.
(verilog-get-beg-of-line, verilog-get-end-of-line)
(verilog-modi-file-or-buffer, verilog-modi-name)
(verilog-modi-point, verilog-within-string): Move defmacro's
before first use to avoid warning. Reported by Steve Pearlmutter.
(verilog-colorize-buffer, verilog-colorize-include-files-buffer)
(verilog-colorize-region, verilog-highlight-buffer)
(verilog-highlight-includes, verilog-highlight-modules)
(verilog-highlight-region, verilog-mode): Rename colorize to
highlight to match other packages. Disable module highlighting,
as received speed complaints, reenable for experimentation only
using new verilog-highlight-modules.
(verilog-read-decls): Fix regexp stack overflow in very large
AUTO_TEMPLATEs, bug250.
(verilog-auto, verilog-delete-auto, verilog-save-buffer-state)
(verilog-scan): Create verilog-save-buffer-state to standardize
making insignificant changes that shouldn't call hooks.
(verilog-save-no-change-functions, verilog-save-scan-cache)
(verilog-scan, verilog-scan-cache-ok-p, verilog-scan-region):
Create verilog-save-no-change-functions to wrap verilog-scan
preservation, and fix to work with nested preserved calls.
(verilog-auto-inst, verilog-auto-inst-dot-name): Support .name
port syntax for AUTOWIRE, and with new verilog-auto-inst-dot-name
generate .name with AUTOINST, bug245. Suggested by David Rogoff.
(verilog-submit-bug-report): Update variable list to be complete.
(verilog-auto, verilog-colorize-region): Fix AUTO expansion
breaking on-the-fly font-locking.
(verilog-colorize-buffer, verilog-colorize-include-files)
(verilog-colorize-include-files-buffer, verilog-colorize-region)
(verilog-load-file-at-mouse, verilog-load-file-at-point)
(verilog-mode, verilog-read-inst-module-matcher): With point on a
AUTOINST cell instance name, middle mouse button now finds-file on
it. Suggested by Brad Dobbie.
(verilog-alw-get-temps, verilog-auto-reset)
(verilog-auto-sense-sigs, verilog-read-always-signals)
(verilog-read-always-signals-recurse): Fix loop indexes being
AUTORESET. AUTORESET now assumes any variables in the
initialization section of a for() should be ignored. Reported by
Dan Dever.
(verilog-error-font-lock-keywords)
(verilog-error-regexp-emacs-alist)
(verilog-error-regexp-xemacs-alist): Fix error detection of
Cadence HAL, reported by David Asher. Repair drift between the
three similar error variables.
(verilog-modi-lookup, verilog-modi-lookup-cache)
(verilog-modi-lookup-last-current, verilog-modi-lookup-last-mod)
(verilog-modi-lookup-last-modi, verilog-modi-lookup-last-tick):
Fix slow verilog-auto expansion on very large files.
(verilog-read-sub-decls-expr, verilog-read-sub-decls-line): Fix
AUTOOUTPUT treating "1*2" as a signal name in submodule connection
"{1*2{...". Broke in last revision.
(verilog-read-sub-decls-expr): Fix AUTOOUTPUT not detecting
submodule connections with replications "{#{a},#{b}}".
| author | Dan Nicolaescu <dann@ics.uci.edu> |
|---|---|
| date | Sat, 23 Oct 2010 14:12:38 -0700 |
| parents | 02e2382f5e8a |
| children |
line wrap: on
line source
The Free Software Foundation claims no copyright on this file, taken from a posting to the public newsgroup net.sources. Path: mit-amt!mit-eddie!think!harvard!seismo!gatech!akgua!whuxlm!whuxl!houxm!ihnp4!stolaf!umn-cs!herndon From: herndon@umn-cs.UUCP Newsgroups: net.sources Subject: GNU Echo, Release 1 Message-ID: <1600001@umn-cs.UUCP> Date: 28 Oct 85 18:23:00 GMT /* Written 12:22 pm Oct 28, 1985 by umn-cs!herndon in umn-cs:net.jokes */ /* ---------- "GNU Echo, Release 1" ---------- */ GNUecho(1) UNIX Programmer's Manual GNUecho(1) NAME echo - echo arguments SYNOPSIS echo [ options ] ... DESCRIPTION _^HE_^Hc_^Hh_^Ho writes its arguments separated by blanks and terminated by a newline on the standard output. Options to filter and redirect the output are as follows: -2 generate rhyming couplets from keywords -3 generate Haiku verse from keywords -5 generate limerick from keywords -a convert ASCII to ASCII -A disambiguate sentence structure -b generate bureaucratese equivalent (see -x) -B issue equivalent C code with bugs fixed -c simplify/calculate arithmetic expression(s) -C remove copyright notice(s) -d define new echo switch map -D delete all ownership information from system files -e evaluate lisp expression(s) -E convert ASCII to Navajo -f read input from file -F transliterate to french -g generate pseudo-revolutionary marxist catch-phrases -G prepend GNU manifesto -h halt system (reboot suppressed on Suns, Apollos, and VAXen, not supported on NOS-2) -i emulate IBM OS/VU (recursive universes not supported) -I emulate IBM VTOS 3.7.6 (chronosynclastic infundibulae supported with restrictions documented in IBM VTOS Printed 10/28/85 18 January 1983 1 GNUecho(1) UNIX Programmer's Manual GNUecho(1) Reference Manual rev 3.2.6) -J generate junk mail -j justify text (see -b option) -k output "echo" software tools -K delete privileged accounts -l generate legalese equivalent -L load echo modules -M generate mail -N send output to all reachable networks (usable with -J, -K, -h options) -n do not add newline to the output -o generate obscene text -O clean up dirty language -p decrypt and print /etc/passwd -P port echo to all reachable networks -P1 oolcay itay -q query standard input for arguments -r read alternate ".echo" file on start up -R change root password to "RMS" -s suspend operating system during output (Sun and VAX BSD 4.2 only) -S translate to swahili -T emulate TCP/IP handler -t issue troff output -u issue unix philosophy essay -v generate reverberating echo -V print debugging information Printed 10/28/85 18 January 1983 2 GNUecho(1) UNIX Programmer's Manual GNUecho(1) -x decrypt DES format messages (NSA secret algorithm CX 3.8, not distributed outside continental US) _^HE_^Hc_^Hh_^Ho is useful for producing diagnostics in shell programs and for writing constant data on pipes. To send diagnostics to the standard error file, do `echo ... 1>&2'. AUTHOR Richard M. Stallman Printed 10/28/85 18 January 1983 3