view etc/gnus/gnus-setup.ast @ 111161:7cae32037c1d

verilog-mode.el updates. This file should be copied to the trunk verbatim. * verilog-mode.el (verilog-directive-re): Make this variable auto-built for efficiency of execution and updating. (verilog-extended-complete-re): Support 'pure' fucntion & task declarations (these have no bodies). (verilog-beg-of-statement): general cleanup to enable support of 'pure' fucntion & task declarations (these have no bodies). These efforts together fix Verilog bug210 from veripool; which was also noticed by Steve Pearlmutter. (verilog-directive-re, verilog-directive-begin, verilog-indent-re) (verilog-directive-nest-re, verilog-set-auto-endcomments): Support `elsif. Reported by Shankar Giri. (verilog-forward-ws&directives, verilog-in-attribute-p): Fixes for attribute handling for lining up declarations and assignments. (verilog-beg-of-statement-1): Fix issue where continued declaration is indented differently if it is after a begin..end clock. (verilog-in-attribute-p, verilog-skip-backward-comments) (verilog-skip-forward-comment-p): Support proper treatment of attributes by indent code. Reported by Jeff Steele. (verilog-in-directive-p): Fix comment to correctly describe function. (verilog-backward-up-list, verilog-in-struct-region-p) (verilog-backward-token, verilog-in-struct-p) (verilog-in-coverage-p, verilog-do-indent) (verilog-pretty-declarations): Use verilog-backward-up-list as wrapper around backward-up-list inorder to properly skip comments. Reported by David Rogoff. (verilog-property-re, verilog-endcomment-reason-re) (verilog-beg-of-statement, verilog-set-auto-endcomments) (verilog-calc-1 ): Fix for assert a; else b; indentation (new form of if). Reported by Max Bjurling and (verilog-calc-1): Fix for clocking block in modport declaration. Reported by Brian Hunter. * verilog-mode.el (verilog-auto-inst, verilog-gate-ios) (verilog-gate-keywords, verilog-read-sub-decls) (verilog-read-sub-decls-gate, verilog-read-sub-decls-gate-ios) (verilog-read-sub-decls-line, verilog-read-sub-decls-sig): Support AUTOINST for gate primitives, bug284. Reported by Mark Johnson. (verilog-read-decls): Fix spaces in V2K module parameters causing mis-identification as interfaces, bug287. (verilog-read-decls): Fix not treating "parameter string" as a parameter in AUTOINSTPARAM. (verilog-read-always-signals-recurse, verilog-read-decls): Fix not treating `elsif similar to `endif inside AUTOSENSE. (verilog-do-indent): Implement correct automatic or static task or function end comment highlight. Reported by Steve Pearlmutter. (verilog-font-lock-keywords-2): Fix highlighting of single character pins, bug264. Reported by Michael Laajanen. (verilog-auto-inst, verilog-read-decls, verilog-read-sub-decls) (verilog-read-sub-decls-in-interfaced, verilog-read-sub-decls-sig) (verilog-subdecls-get-interfaced, verilog-subdecls-new): Support interfaces with AUTOINST, bug270. Reported by Luis Gutierrez. (verilog-pretty-expr): Fix interactive arguments, bug272. Reported by Mark Johnson. (verilog-auto-tieoff, verilog-auto-tieoff-ignore-regexp): Add 'verilog-auto-tieoff-ignore-regexp' for AUTOTIEOFF, bug269. Suggested by Gary Delp. (verilog-mode-map, verilog-preprocess, verilog-preprocess-history) (verilog-preprocessor, verilog-set-compile-command): Create verilog-preprocess and verilog-preprocessor to show preprocessed output. (verilog-get-beg-of-line, verilog-get-end-of-line) (verilog-modi-file-or-buffer, verilog-modi-name) (verilog-modi-point, verilog-within-string): Move defmacro's before first use to avoid warning. Reported by Steve Pearlmutter. (verilog-colorize-buffer, verilog-colorize-include-files-buffer) (verilog-colorize-region, verilog-highlight-buffer) (verilog-highlight-includes, verilog-highlight-modules) (verilog-highlight-region, verilog-mode): Rename colorize to highlight to match other packages. Disable module highlighting, as received speed complaints, reenable for experimentation only using new verilog-highlight-modules. (verilog-read-decls): Fix regexp stack overflow in very large AUTO_TEMPLATEs, bug250. (verilog-auto, verilog-delete-auto, verilog-save-buffer-state) (verilog-scan): Create verilog-save-buffer-state to standardize making insignificant changes that shouldn't call hooks. (verilog-save-no-change-functions, verilog-save-scan-cache) (verilog-scan, verilog-scan-cache-ok-p, verilog-scan-region): Create verilog-save-no-change-functions to wrap verilog-scan preservation, and fix to work with nested preserved calls. (verilog-auto-inst, verilog-auto-inst-dot-name): Support .name port syntax for AUTOWIRE, and with new verilog-auto-inst-dot-name generate .name with AUTOINST, bug245. Suggested by David Rogoff. (verilog-submit-bug-report): Update variable list to be complete. (verilog-auto, verilog-colorize-region): Fix AUTO expansion breaking on-the-fly font-locking. (verilog-colorize-buffer, verilog-colorize-include-files) (verilog-colorize-include-files-buffer, verilog-colorize-region) (verilog-load-file-at-mouse, verilog-load-file-at-point) (verilog-mode, verilog-read-inst-module-matcher): With point on a AUTOINST cell instance name, middle mouse button now finds-file on it. Suggested by Brad Dobbie. (verilog-alw-get-temps, verilog-auto-reset) (verilog-auto-sense-sigs, verilog-read-always-signals) (verilog-read-always-signals-recurse): Fix loop indexes being AUTORESET. AUTORESET now assumes any variables in the initialization section of a for() should be ignored. Reported by Dan Dever. (verilog-error-font-lock-keywords) (verilog-error-regexp-emacs-alist) (verilog-error-regexp-xemacs-alist): Fix error detection of Cadence HAL, reported by David Asher. Repair drift between the three similar error variables. (verilog-modi-lookup, verilog-modi-lookup-cache) (verilog-modi-lookup-last-current, verilog-modi-lookup-last-mod) (verilog-modi-lookup-last-modi, verilog-modi-lookup-last-tick): Fix slow verilog-auto expansion on very large files. (verilog-read-sub-decls-expr, verilog-read-sub-decls-line): Fix AUTOOUTPUT treating "1*2" as a signal name in submodule connection "{1*2{...". Broke in last revision. (verilog-read-sub-decls-expr): Fix AUTOOUTPUT not detecting submodule connections with replications "{#{a},#{b}}".

@title Configuring Gnus for the first time

@node What do you want to do with Gnus?

@variable outbound (:radio ((item :tag "Send mail via sendmail" "sendmail") (item :tag "Send mail via SMTP" "smtp"))) "sendmail"

@variable backends (:set ((item :tag "Read news via NNTP" "nntp") (item :tag "Read mail, store it locally" "nnml") (item :tag "Read mail and store it on an IMAP server" "nnimap"))) (list "nnml")
@result primary-mail-selections (list backends outbound)

@text
Welcome to Gnus.  You need to tell us what you want to do with Gnus
before we go on to specific configurations.

Choose the tasks you want to set up: 
@variable{backends}

Choose the method Gnus will use to send mail: 
@variable{outbound}

@end text

@next (member "nnml" backends) "Setting up local mail storage (nnml)"
@next (member "nntp" backends) "Setting up a NNTP server"

@node Setting up local mail storage (nnml)
@variable mechanism (:radio ((item :tag "Get mail from your Unix mbox" "mbox") (item :tag "Use POP3 to retrieve mail" "pop3"))) "mbox"
@result nnml-mechanism (list mechanism)
@text
You are setting up local mail storage, using the nnml backend in Gnus terms.

Your mail can be downloaded into Gnus in several ways, choose one:
@variable{mechanism}

@end text

@node Setting up a NNTP server

@text
TODO: this will be a real link.
Run M-x assistant and use the news-server.ast file as input.
@end text


@c Local variables:
@c mode: texinfo
@c End:

@ignore
   arch-tag: 6b7b200b-9169-4b44-8b32-b73773fa71af
@end ignore