view etc/ms-kermit @ 111161:7cae32037c1d

verilog-mode.el updates. This file should be copied to the trunk verbatim. * verilog-mode.el (verilog-directive-re): Make this variable auto-built for efficiency of execution and updating. (verilog-extended-complete-re): Support 'pure' fucntion & task declarations (these have no bodies). (verilog-beg-of-statement): general cleanup to enable support of 'pure' fucntion & task declarations (these have no bodies). These efforts together fix Verilog bug210 from veripool; which was also noticed by Steve Pearlmutter. (verilog-directive-re, verilog-directive-begin, verilog-indent-re) (verilog-directive-nest-re, verilog-set-auto-endcomments): Support `elsif. Reported by Shankar Giri. (verilog-forward-ws&directives, verilog-in-attribute-p): Fixes for attribute handling for lining up declarations and assignments. (verilog-beg-of-statement-1): Fix issue where continued declaration is indented differently if it is after a begin..end clock. (verilog-in-attribute-p, verilog-skip-backward-comments) (verilog-skip-forward-comment-p): Support proper treatment of attributes by indent code. Reported by Jeff Steele. (verilog-in-directive-p): Fix comment to correctly describe function. (verilog-backward-up-list, verilog-in-struct-region-p) (verilog-backward-token, verilog-in-struct-p) (verilog-in-coverage-p, verilog-do-indent) (verilog-pretty-declarations): Use verilog-backward-up-list as wrapper around backward-up-list inorder to properly skip comments. Reported by David Rogoff. (verilog-property-re, verilog-endcomment-reason-re) (verilog-beg-of-statement, verilog-set-auto-endcomments) (verilog-calc-1 ): Fix for assert a; else b; indentation (new form of if). Reported by Max Bjurling and (verilog-calc-1): Fix for clocking block in modport declaration. Reported by Brian Hunter. * verilog-mode.el (verilog-auto-inst, verilog-gate-ios) (verilog-gate-keywords, verilog-read-sub-decls) (verilog-read-sub-decls-gate, verilog-read-sub-decls-gate-ios) (verilog-read-sub-decls-line, verilog-read-sub-decls-sig): Support AUTOINST for gate primitives, bug284. Reported by Mark Johnson. (verilog-read-decls): Fix spaces in V2K module parameters causing mis-identification as interfaces, bug287. (verilog-read-decls): Fix not treating "parameter string" as a parameter in AUTOINSTPARAM. (verilog-read-always-signals-recurse, verilog-read-decls): Fix not treating `elsif similar to `endif inside AUTOSENSE. (verilog-do-indent): Implement correct automatic or static task or function end comment highlight. Reported by Steve Pearlmutter. (verilog-font-lock-keywords-2): Fix highlighting of single character pins, bug264. Reported by Michael Laajanen. (verilog-auto-inst, verilog-read-decls, verilog-read-sub-decls) (verilog-read-sub-decls-in-interfaced, verilog-read-sub-decls-sig) (verilog-subdecls-get-interfaced, verilog-subdecls-new): Support interfaces with AUTOINST, bug270. Reported by Luis Gutierrez. (verilog-pretty-expr): Fix interactive arguments, bug272. Reported by Mark Johnson. (verilog-auto-tieoff, verilog-auto-tieoff-ignore-regexp): Add 'verilog-auto-tieoff-ignore-regexp' for AUTOTIEOFF, bug269. Suggested by Gary Delp. (verilog-mode-map, verilog-preprocess, verilog-preprocess-history) (verilog-preprocessor, verilog-set-compile-command): Create verilog-preprocess and verilog-preprocessor to show preprocessed output. (verilog-get-beg-of-line, verilog-get-end-of-line) (verilog-modi-file-or-buffer, verilog-modi-name) (verilog-modi-point, verilog-within-string): Move defmacro's before first use to avoid warning. Reported by Steve Pearlmutter. (verilog-colorize-buffer, verilog-colorize-include-files-buffer) (verilog-colorize-region, verilog-highlight-buffer) (verilog-highlight-includes, verilog-highlight-modules) (verilog-highlight-region, verilog-mode): Rename colorize to highlight to match other packages. Disable module highlighting, as received speed complaints, reenable for experimentation only using new verilog-highlight-modules. (verilog-read-decls): Fix regexp stack overflow in very large AUTO_TEMPLATEs, bug250. (verilog-auto, verilog-delete-auto, verilog-save-buffer-state) (verilog-scan): Create verilog-save-buffer-state to standardize making insignificant changes that shouldn't call hooks. (verilog-save-no-change-functions, verilog-save-scan-cache) (verilog-scan, verilog-scan-cache-ok-p, verilog-scan-region): Create verilog-save-no-change-functions to wrap verilog-scan preservation, and fix to work with nested preserved calls. (verilog-auto-inst, verilog-auto-inst-dot-name): Support .name port syntax for AUTOWIRE, and with new verilog-auto-inst-dot-name generate .name with AUTOINST, bug245. Suggested by David Rogoff. (verilog-submit-bug-report): Update variable list to be complete. (verilog-auto, verilog-colorize-region): Fix AUTO expansion breaking on-the-fly font-locking. (verilog-colorize-buffer, verilog-colorize-include-files) (verilog-colorize-include-files-buffer, verilog-colorize-region) (verilog-load-file-at-mouse, verilog-load-file-at-point) (verilog-mode, verilog-read-inst-module-matcher): With point on a AUTOINST cell instance name, middle mouse button now finds-file on it. Suggested by Brad Dobbie. (verilog-alw-get-temps, verilog-auto-reset) (verilog-auto-sense-sigs, verilog-read-always-signals) (verilog-read-always-signals-recurse): Fix loop indexes being AUTORESET. AUTORESET now assumes any variables in the initialization section of a for() should be ignored. Reported by Dan Dever. (verilog-error-font-lock-keywords) (verilog-error-regexp-emacs-alist) (verilog-error-regexp-xemacs-alist): Fix error detection of Cadence HAL, reported by David Asher. Repair drift between the three similar error variables. (verilog-modi-lookup, verilog-modi-lookup-cache) (verilog-modi-lookup-last-current, verilog-modi-lookup-last-mod) (verilog-modi-lookup-last-modi, verilog-modi-lookup-last-tick): Fix slow verilog-auto expansion on very large files. (verilog-read-sub-decls-expr, verilog-read-sub-decls-line): Fix AUTOOUTPUT treating "1*2" as a signal name in submodule connection "{1*2{...". Broke in last revision. (verilog-read-sub-decls-expr): Fix AUTOOUTPUT not detecting submodule connections with replications "{#{a},#{b}}".

;;; The code here is forced by the interface, and is not subject to
;;; copyright, constituting the only possible expression of the algorithm
;;; in this format.

;;; This file is designed for an 8-bit connection.
;;; Use the file ms-7bkermit if you have a 7-bit connection.

;; Meta key mappings for EMACS
;; By Robert Earl ([e-mail])
;; May 13, 1990
;;
;; WARNING:
;;  requires an 8-bit path to host.  many dialups and lans won't pass the
;;  eighth bit by default and may require a special command to turn this
;;  off.  `screen' is known to mask the eighth bit of input as well.

set term controls 8-bit
set translation key off

;; control keys
set key \3449 \128	;; m-c-@
set key \3358 \129	;; m-c-a
set key \3376 \130	;; m-c-b
set key \3374 \131	;; m-c-c
set key \3360 \132	;; m-c-d
set key \3346 \133	;; m-c-e
set key \3361 \134	;; m-c-f
set key \3362 \135	;; m-c-g
set key \3342 \136	;; m-bs
set key \3363 \136	;; m-c-h (sends same code as above)
set key \2469 \137	;; m-tab
set key \3351 \137	;; m-c-i (same as above)
set key \3364 \138	;; m-c-j
set key \3365 \139	;; m-c-k
set key \3366 \140	;; m-c-l
;set key \3378 \141	;; m-c-m
set key \2332 \141	;; m-ret (sends same code as above)
set key \3377 \142	;; m-c-n
set key \3352 \143	;; m-c-o
set key \3353 \144	;; m-c-p
set key \3344 \145	;; m-c-q
set key \3347 \146	;; m-c-r
set key \3359 \147	;; m-c-s
set key \3348 \148	;; m-c-t
set key \3350 \149	;; m-c-u
set key \3375 \150	;; m-c-v
set key \3345 \151	;; m-c-w
set key \3373 \152	;; m-c-x
set key \3349 \153	;; m-c-y
set key \3372 \154	;; m-c-z

;; misc keys
;set key \3354 \155	;; m-c-[
set key \2305 \155	;; m-esc (sends same as above)
set key \3371 \156	;; m-c-\
set key \3355 \157	;; m-c-]
set key \3453 \158	;; m-c-^
set key \3458 \159	;; m-c-_

;; \160 is conspicuously missing here--
;; alt-spc doesn't generate a distinct scan code...
;; neither do shift-spc and ctrl-spc.
;; no idea why.

set key \2936 \161	;; m-!
set key \2856 \162	;; m-"
set key \2938 \163	;; m-#
set key \2939 \164	;; m-$
set key \2940 \165	;; m-%
set key \2942 \166	;; m-&
set key \2344 \167	;; m-'
set key \2944 \168	;; m-(
set key \2945 \169	;; m-)
set key \2943 \170	;; m-*
set key \2947 \171	;; m-+
set key \2355 \172	;; m-,
set key \2434 \173	;; m--
set key \2356 \174	;; m-.
set key \2357 \175	;; m-/

;; number keys
set key \2433 \176	;; m-0
set key \2424 \177	;; m-1
set key \2425 \178
set key \2426 \179
set key \2427 \180
set key \2428 \181
set key \2429 \182
set key \2430 \183
set key \2431 \184
set key \2432 \185	;; m-9

set key \2855 \186	;; m-:
set key \2343 \187	;; m-;
set key \2867 \188	;; m-<
set key \2435 \189	;; m-=
set key \2868 \190	;; m->
set key \2869 \191	;; m-?
set key \2937 \192	;; m-@

;; shifted A-Z
set key \2846 \193	;; m-A
set key \2864 \194
set key \2862 \195
set key \2848 \196
set key \2834 \197
set key \2849 \198
set key \2850 \199
set key \2851 \200
set key \2839 \201
set key \2852 \202
set key \2853 \203
set key \2854 \204
set key \2866 \205
set key \2865 \206
set key \2840 \207
set key \2841 \208
set key \2832 \209
set key \2835 \210
set key \2847 \211
set key \2836 \212
set key \2838 \213
set key \2863 \214
set key \2833 \215
set key \2861 \216
set key \2837 \217
set key \2860 \218	;; m-Z

set key \2330 \219	;; m-[
set key \2347 \220	;; m-\
set key \2331 \221	;; m-]
set key \2941 \222	;; m-^
set key \2946 \223	;; m-_
set key \2345 \224	;; m-`

;; lowercase a-z
set key \2334 \225	;; m-a
set key \2352 \226
set key \2350 \227
set key \2336 \228
set key \2322 \229
set key \2337 \230
set key \2338 \231
set key \2339 \232
set key \2327 \233
set key \2340 \234
set key \2341 \235
set key \2342 \236
set key \2354 \237
set key \2353 \238
set key \2328 \239
set key \2329 \240
set key \2320 \241
set key \2323 \242
set key \2335 \243
set key \2324 \244
set key \2326 \245
set key \2351 \246
set key \2321 \247
set key \2349 \248
set key \2325 \249
set key \2348 \250	;; m-z

;; more shifted misc. keys
set key \2842 \251	;; m-{
set key \2859 \252	;; m-|
set key \2843 \253	;; m-}
set key \2857 \254	;; m-~
set key \2318 \255	;; m-del


;;; arch-tag: 93cefb0a-2b07-4d09-ae78-4d807b15645d