view install-sh @ 111161:7cae32037c1d

verilog-mode.el updates. This file should be copied to the trunk verbatim. * verilog-mode.el (verilog-directive-re): Make this variable auto-built for efficiency of execution and updating. (verilog-extended-complete-re): Support 'pure' fucntion & task declarations (these have no bodies). (verilog-beg-of-statement): general cleanup to enable support of 'pure' fucntion & task declarations (these have no bodies). These efforts together fix Verilog bug210 from veripool; which was also noticed by Steve Pearlmutter. (verilog-directive-re, verilog-directive-begin, verilog-indent-re) (verilog-directive-nest-re, verilog-set-auto-endcomments): Support `elsif. Reported by Shankar Giri. (verilog-forward-ws&directives, verilog-in-attribute-p): Fixes for attribute handling for lining up declarations and assignments. (verilog-beg-of-statement-1): Fix issue where continued declaration is indented differently if it is after a begin..end clock. (verilog-in-attribute-p, verilog-skip-backward-comments) (verilog-skip-forward-comment-p): Support proper treatment of attributes by indent code. Reported by Jeff Steele. (verilog-in-directive-p): Fix comment to correctly describe function. (verilog-backward-up-list, verilog-in-struct-region-p) (verilog-backward-token, verilog-in-struct-p) (verilog-in-coverage-p, verilog-do-indent) (verilog-pretty-declarations): Use verilog-backward-up-list as wrapper around backward-up-list inorder to properly skip comments. Reported by David Rogoff. (verilog-property-re, verilog-endcomment-reason-re) (verilog-beg-of-statement, verilog-set-auto-endcomments) (verilog-calc-1 ): Fix for assert a; else b; indentation (new form of if). Reported by Max Bjurling and (verilog-calc-1): Fix for clocking block in modport declaration. Reported by Brian Hunter. * verilog-mode.el (verilog-auto-inst, verilog-gate-ios) (verilog-gate-keywords, verilog-read-sub-decls) (verilog-read-sub-decls-gate, verilog-read-sub-decls-gate-ios) (verilog-read-sub-decls-line, verilog-read-sub-decls-sig): Support AUTOINST for gate primitives, bug284. Reported by Mark Johnson. (verilog-read-decls): Fix spaces in V2K module parameters causing mis-identification as interfaces, bug287. (verilog-read-decls): Fix not treating "parameter string" as a parameter in AUTOINSTPARAM. (verilog-read-always-signals-recurse, verilog-read-decls): Fix not treating `elsif similar to `endif inside AUTOSENSE. (verilog-do-indent): Implement correct automatic or static task or function end comment highlight. Reported by Steve Pearlmutter. (verilog-font-lock-keywords-2): Fix highlighting of single character pins, bug264. Reported by Michael Laajanen. (verilog-auto-inst, verilog-read-decls, verilog-read-sub-decls) (verilog-read-sub-decls-in-interfaced, verilog-read-sub-decls-sig) (verilog-subdecls-get-interfaced, verilog-subdecls-new): Support interfaces with AUTOINST, bug270. Reported by Luis Gutierrez. (verilog-pretty-expr): Fix interactive arguments, bug272. Reported by Mark Johnson. (verilog-auto-tieoff, verilog-auto-tieoff-ignore-regexp): Add 'verilog-auto-tieoff-ignore-regexp' for AUTOTIEOFF, bug269. Suggested by Gary Delp. (verilog-mode-map, verilog-preprocess, verilog-preprocess-history) (verilog-preprocessor, verilog-set-compile-command): Create verilog-preprocess and verilog-preprocessor to show preprocessed output. (verilog-get-beg-of-line, verilog-get-end-of-line) (verilog-modi-file-or-buffer, verilog-modi-name) (verilog-modi-point, verilog-within-string): Move defmacro's before first use to avoid warning. Reported by Steve Pearlmutter. (verilog-colorize-buffer, verilog-colorize-include-files-buffer) (verilog-colorize-region, verilog-highlight-buffer) (verilog-highlight-includes, verilog-highlight-modules) (verilog-highlight-region, verilog-mode): Rename colorize to highlight to match other packages. Disable module highlighting, as received speed complaints, reenable for experimentation only using new verilog-highlight-modules. (verilog-read-decls): Fix regexp stack overflow in very large AUTO_TEMPLATEs, bug250. (verilog-auto, verilog-delete-auto, verilog-save-buffer-state) (verilog-scan): Create verilog-save-buffer-state to standardize making insignificant changes that shouldn't call hooks. (verilog-save-no-change-functions, verilog-save-scan-cache) (verilog-scan, verilog-scan-cache-ok-p, verilog-scan-region): Create verilog-save-no-change-functions to wrap verilog-scan preservation, and fix to work with nested preserved calls. (verilog-auto-inst, verilog-auto-inst-dot-name): Support .name port syntax for AUTOWIRE, and with new verilog-auto-inst-dot-name generate .name with AUTOINST, bug245. Suggested by David Rogoff. (verilog-submit-bug-report): Update variable list to be complete. (verilog-auto, verilog-colorize-region): Fix AUTO expansion breaking on-the-fly font-locking. (verilog-colorize-buffer, verilog-colorize-include-files) (verilog-colorize-include-files-buffer, verilog-colorize-region) (verilog-load-file-at-mouse, verilog-load-file-at-point) (verilog-mode, verilog-read-inst-module-matcher): With point on a AUTOINST cell instance name, middle mouse button now finds-file on it. Suggested by Brad Dobbie. (verilog-alw-get-temps, verilog-auto-reset) (verilog-auto-sense-sigs, verilog-read-always-signals) (verilog-read-always-signals-recurse): Fix loop indexes being AUTORESET. AUTORESET now assumes any variables in the initialization section of a for() should be ignored. Reported by Dan Dever. (verilog-error-font-lock-keywords) (verilog-error-regexp-emacs-alist) (verilog-error-regexp-xemacs-alist): Fix error detection of Cadence HAL, reported by David Asher. Repair drift between the three similar error variables. (verilog-modi-lookup, verilog-modi-lookup-cache) (verilog-modi-lookup-last-current, verilog-modi-lookup-last-mod) (verilog-modi-lookup-last-modi, verilog-modi-lookup-last-tick): Fix slow verilog-auto expansion on very large files. (verilog-read-sub-decls-expr, verilog-read-sub-decls-line): Fix AUTOOUTPUT treating "1*2" as a signal name in submodule connection "{1*2{...". Broke in last revision. (verilog-read-sub-decls-expr): Fix AUTOOUTPUT not detecting submodule connections with replications "{#{a},#{b}}".

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""

	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi

	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ]
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename |
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ]
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile

fi &&


exit 0