Mercurial > emacs
view lwlib/xlwmenu.h @ 111161:7cae32037c1d
verilog-mode.el updates.
This file should be copied to the trunk verbatim.
* verilog-mode.el (verilog-directive-re): Make this variable
auto-built for efficiency of execution and updating.
(verilog-extended-complete-re): Support 'pure' fucntion & task
declarations (these have no bodies).
(verilog-beg-of-statement): general cleanup to enable support of
'pure' fucntion & task declarations (these have no bodies). These
efforts together fix Verilog bug210 from veripool; which was also
noticed by Steve Pearlmutter.
(verilog-directive-re, verilog-directive-begin, verilog-indent-re)
(verilog-directive-nest-re, verilog-set-auto-endcomments): Support
`elsif. Reported by Shankar Giri.
(verilog-forward-ws&directives, verilog-in-attribute-p): Fixes for
attribute handling for lining up declarations and assignments.
(verilog-beg-of-statement-1): Fix issue where continued declaration
is indented differently if it is after a begin..end clock.
(verilog-in-attribute-p, verilog-skip-backward-comments)
(verilog-skip-forward-comment-p): Support proper treatment of
attributes by indent code. Reported by Jeff Steele.
(verilog-in-directive-p): Fix comment to correctly describe
function.
(verilog-backward-up-list, verilog-in-struct-region-p)
(verilog-backward-token, verilog-in-struct-p)
(verilog-in-coverage-p, verilog-do-indent)
(verilog-pretty-declarations): Use verilog-backward-up-list as
wrapper around backward-up-list inorder to properly skip comments.
Reported by David Rogoff.
(verilog-property-re, verilog-endcomment-reason-re)
(verilog-beg-of-statement, verilog-set-auto-endcomments)
(verilog-calc-1 ): Fix for assert a; else b; indentation (new form
of if). Reported by Max Bjurling and
(verilog-calc-1): Fix for clocking block in modport
declaration. Reported by Brian Hunter.
* verilog-mode.el (verilog-auto-inst, verilog-gate-ios)
(verilog-gate-keywords, verilog-read-sub-decls)
(verilog-read-sub-decls-gate, verilog-read-sub-decls-gate-ios)
(verilog-read-sub-decls-line, verilog-read-sub-decls-sig): Support
AUTOINST for gate primitives, bug284. Reported by Mark Johnson.
(verilog-read-decls): Fix spaces in V2K module parameters causing
mis-identification as interfaces, bug287.
(verilog-read-decls): Fix not treating "parameter string" as a
parameter in AUTOINSTPARAM.
(verilog-read-always-signals-recurse, verilog-read-decls): Fix not
treating `elsif similar to `endif inside AUTOSENSE.
(verilog-do-indent): Implement correct automatic or static task or
function end comment highlight. Reported by Steve Pearlmutter.
(verilog-font-lock-keywords-2): Fix highlighting of single
character pins, bug264. Reported by Michael Laajanen.
(verilog-auto-inst, verilog-read-decls, verilog-read-sub-decls)
(verilog-read-sub-decls-in-interfaced, verilog-read-sub-decls-sig)
(verilog-subdecls-get-interfaced, verilog-subdecls-new): Support
interfaces with AUTOINST, bug270. Reported by Luis Gutierrez.
(verilog-pretty-expr): Fix interactive arguments, bug272. Reported
by Mark Johnson.
(verilog-auto-tieoff, verilog-auto-tieoff-ignore-regexp): Add
'verilog-auto-tieoff-ignore-regexp' for AUTOTIEOFF,
bug269. Suggested by Gary Delp.
(verilog-mode-map, verilog-preprocess, verilog-preprocess-history)
(verilog-preprocessor, verilog-set-compile-command): Create
verilog-preprocess and verilog-preprocessor to show preprocessed
output.
(verilog-get-beg-of-line, verilog-get-end-of-line)
(verilog-modi-file-or-buffer, verilog-modi-name)
(verilog-modi-point, verilog-within-string): Move defmacro's
before first use to avoid warning. Reported by Steve Pearlmutter.
(verilog-colorize-buffer, verilog-colorize-include-files-buffer)
(verilog-colorize-region, verilog-highlight-buffer)
(verilog-highlight-includes, verilog-highlight-modules)
(verilog-highlight-region, verilog-mode): Rename colorize to
highlight to match other packages. Disable module highlighting,
as received speed complaints, reenable for experimentation only
using new verilog-highlight-modules.
(verilog-read-decls): Fix regexp stack overflow in very large
AUTO_TEMPLATEs, bug250.
(verilog-auto, verilog-delete-auto, verilog-save-buffer-state)
(verilog-scan): Create verilog-save-buffer-state to standardize
making insignificant changes that shouldn't call hooks.
(verilog-save-no-change-functions, verilog-save-scan-cache)
(verilog-scan, verilog-scan-cache-ok-p, verilog-scan-region):
Create verilog-save-no-change-functions to wrap verilog-scan
preservation, and fix to work with nested preserved calls.
(verilog-auto-inst, verilog-auto-inst-dot-name): Support .name
port syntax for AUTOWIRE, and with new verilog-auto-inst-dot-name
generate .name with AUTOINST, bug245. Suggested by David Rogoff.
(verilog-submit-bug-report): Update variable list to be complete.
(verilog-auto, verilog-colorize-region): Fix AUTO expansion
breaking on-the-fly font-locking.
(verilog-colorize-buffer, verilog-colorize-include-files)
(verilog-colorize-include-files-buffer, verilog-colorize-region)
(verilog-load-file-at-mouse, verilog-load-file-at-point)
(verilog-mode, verilog-read-inst-module-matcher): With point on a
AUTOINST cell instance name, middle mouse button now finds-file on
it. Suggested by Brad Dobbie.
(verilog-alw-get-temps, verilog-auto-reset)
(verilog-auto-sense-sigs, verilog-read-always-signals)
(verilog-read-always-signals-recurse): Fix loop indexes being
AUTORESET. AUTORESET now assumes any variables in the
initialization section of a for() should be ignored. Reported by
Dan Dever.
(verilog-error-font-lock-keywords)
(verilog-error-regexp-emacs-alist)
(verilog-error-regexp-xemacs-alist): Fix error detection of
Cadence HAL, reported by David Asher. Repair drift between the
three similar error variables.
(verilog-modi-lookup, verilog-modi-lookup-cache)
(verilog-modi-lookup-last-current, verilog-modi-lookup-last-mod)
(verilog-modi-lookup-last-modi, verilog-modi-lookup-last-tick):
Fix slow verilog-auto expansion on very large files.
(verilog-read-sub-decls-expr, verilog-read-sub-decls-line): Fix
AUTOOUTPUT treating "1*2" as a signal name in submodule connection
"{1*2{...". Broke in last revision.
(verilog-read-sub-decls-expr): Fix AUTOOUTPUT not detecting
submodule connections with replications "{#{a},#{b}}".
author | Dan Nicolaescu <dann@ics.uci.edu> |
---|---|
date | Sat, 23 Oct 2010 14:12:38 -0700 |
parents | 1d1d5d9bd884 |
children | 24c4451bcaf7 376148b31b5e |
line wrap: on
line source
/* Interface of a lightweight menubar widget. Copyright (C) 1992 Lucid, Inc. Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of the Lucid Widget Library. The Lucid Widget Library is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. The Lucid Widget Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef _XlwMenu_h #define _XlwMenu_h /*********************************************************************** * * XlwMenu Widget * ***********************************************************************/ #include "lwlib.h" /* Resource names used by the XlwMenu widget */ #define XtNdisabledForeground "disabledForeground" #define XtCDisabledForeground "DisabledForeground" #define XtNbuttonForeground "buttonForeground" #define XtCButtonForeground "ButtonForeground" #define XtNmargin "margin" #define XtNhorizontalSpacing "horizontalSpacing" #define XtNverticalSpacing "verticalSpacing" #define XtNarrowSpacing "arrowSpacing" #define XtNmenu "menu" #define XtCMenu "Menu" #define XtNopen "open" #define XtNselect "select" #define XtNhighlightCallback "highlightCallback" #define XtNenterCallback "enterCallback" #define XtNleaveCallback "leaveCallback" #define XtNmenuBorderWidth "menuBorderWidth" #define XtNhorizontal "horizontal" #define XtCHorizontal "Horizontal" #define XtNcursor "cursor" #define XtNCursor "Cursor" #define XtNshowGrip "showGrip" #define XtCShowGrip "ShowGrip" #define XtNresizeToPreferred "resizeToPreferred" #define XtCResizeToPreferred "ResizeToPreferred" #define XtNallowResize "allowResize" #define XtCAllowResize "AllowResize" /* Motif-compatible resource names */ #define XmNshadowThickness "shadowThickness" #define XmCShadowThickness "ShadowThickness" #define XmNtopShadowColor "topShadowColor" #define XmCTopShadowColor "TopShadowColor" #define XmNbottomShadowColor "bottomShadowColor" #define XmCBottomShadowColor "BottomShadowColor" #define XmNtopShadowPixmap "topShadowPixmap" #define XmCTopShadowPixmap "TopShadowPixmap" #define XmNbottomShadowPixmap "bottomShadowPixmap" #define XmCBottomShadowPixmap "BottomShadowPixmap" #define XmRHorizontalDimension "HorizontalDimension" typedef struct _XlwMenuRec *XlwMenuWidget; typedef struct _XlwMenuClassRec *XlwMenuWidgetClass; extern WidgetClass xlwMenuWidgetClass; #endif /* _XlwMenu_h */ /* arch-tag: 0c019735-d61b-4080-be85-4fdd6e50ae07 (do not change this comment) */