Mercurial > emacs
view doc/emacs/custom.texi @ 104894:7f459491fb93
* nsfont.m (ns_get_family): Don't force first letter to uppercase.
author | Adrian Robert <Adrian.B.Robert@gmail.com> |
---|---|
date | Wed, 09 Sep 2009 15:05:47 +0000 |
parents | 9124ec33358e |
children | e73a8ec76227 |
line wrap: on
line source
@c This is part of the Emacs manual. @c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2000, 2001, @c 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. @c See file emacs.texi for copying conditions. @node Customization, Quitting, Amusements, Top @chapter Customization @cindex customization This chapter describes some simple methods to customize the behavior of Emacs. Apart from the methods described here, see @ref{X Resources} for information about using X resources to customize Emacs, and see @ref{Keyboard Macros} for information about recording and replaying keyboard macros. Making more far-reaching and open-ended changes involves writing Emacs Lisp code; see @iftex @cite{The Emacs Lisp Reference Manual}. @end iftex @ifnottex @ref{Top, Emacs Lisp, Emacs Lisp, elisp, The Emacs Lisp Reference Manual}. @end ifnottex @menu * Minor Modes:: Each minor mode is a feature you can turn on independently of any others. * Easy Customization:: Convenient way to browse and change settings. * Variables:: Many Emacs commands examine Emacs variables to decide what to do; by setting variables, you can control their functioning. * Key Bindings:: The keymaps say what command each key runs. By changing them, you can "redefine keys". * Syntax:: The syntax table controls how words and expressions are parsed. * Init File:: How to write common customizations in the @file{.emacs} file. @end menu @node Minor Modes @section Minor Modes @cindex minor modes @cindex mode, minor Minor modes are optional features which you can turn on or off. For example, Auto Fill mode is a minor mode in which @key{SPC} breaks lines between words as you type. Minor modes are independent of one another and of the selected major mode. Most minor modes say in the mode line when they are enabled; for example, @samp{Fill} in the mode line means that Auto Fill mode is enabled. Each minor mode is associated with a command, called the @dfn{mode command}, which turns it on or off. The name of this command consists of the name of the minor mode, followed by @samp{-mode}; for instance, the mode command for Auto Fill mode is @code{auto-fill-mode}. Calling the minor mode command with no prefix argument @dfn{toggles} the mode, turning it on if it was off, and off if it was on. A positive argument always turns the mode on, and a zero or negative argument always turns it off. Mode commands are usually invoked with @kbd{M-x}, but you can bind keys to them if you wish (@pxref{Key Bindings}). Most minor modes also have a @dfn{mode variable}, with the same name as the mode command. Its value is non-@code{nil} if the mode is enabled, and @code{nil} if it is disabled. In some minor modes---but not all---the value of the variable alone determines whether the mode is active: the mode command works simply by setting the variable, and changing the value of the variable has the same effect as calling the mode command. Because not all minor modes work this way, we recommend that you avoid changing the mode variables directly; use the mode commands instead. Some minor modes are @dfn{buffer-local}: they apply only to the current buffer, so you can enable the mode in certain buffers and not others. Other minor modes are @dfn{global}: while enabled, they affect everything you do in the Emacs session, in all buffers. Some global minor modes are enabled by default. The following is a list of some buffer-local minor modes: @itemize @bullet @item Abbrev mode automatically expands text based on pre-defined abbreviation definitions. @xref{Abbrevs}. @item Auto Fill mode inserts newlines as you type to prevent lines from becoming too long. @xref{Filling}. @item Auto Save mode saves the buffer contents periodically to reduce the amount of work you can lose in case of a crash. @xref{Auto Save}. @item Enriched mode enables editing and saving of formatted text. @xref{Formatted Text}. @item Flyspell mode automatically highlights misspelled words. @xref{Spelling}. @item Font-Lock mode automatically highlights certain textual units found in programs. It is enabled globally by default, but you can disable it in individual buffers. @xref{Faces}. @findex linum-mode @cindex Linum mode @item Linum mode displays each line's line number in the window's left margin. Its mode command is @code{linum-mode}. @item Outline minor mode provides similar facilities to the major mode called Outline mode. @xref{Outline Mode}. @cindex Overwrite mode @cindex mode, Overwrite @findex overwrite-mode @kindex INSERT @item Overwrite mode causes ordinary printing characters to replace existing text instead of shoving it to the right. For example, if point is in front of the @samp{B} in @samp{FOOBAR}, then in Overwrite mode typing a @kbd{G} changes it to @samp{FOOGAR}, instead of producing @samp{FOOGBAR} as usual. In Overwrite mode, the command @kbd{C-q} inserts the next character whatever it may be, even if it is a digit---this gives you a way to insert a character instead of replacing an existing character. The mode command, @code{overwrite-mode}, is bound to the @key{Insert} key. @findex binary-overwrite-mode @item Binary Overwrite mode is a variant of Overwrite mode for editing binary files; it treats newlines and tabs like other characters, so that they overwrite other characters and can be overwritten by them. In Binary Overwrite mode, digits after @kbd{C-q} specify an octal character code, as usual. @item Visual Line mode performs ``word wrapping'', causing long lines to be wrapped at word boundaries. @xref{Visual Line Mode}. @end itemize Here are some useful global minor modes. Since Line Number mode and Transient Mark mode can be enabled or disabled just by setting the value of the minor mode variable, you @emph{can} set them differently for particular buffers, by explicitly making the corresponding variable local in those buffers. @xref{Locals}. @itemize @bullet @item Column Number mode enables display of the current column number in the mode line. @xref{Mode Line}. @item Delete Selection mode causes text insertion to first delete the text in the region, if the region is active. @xref{Using Region}. @item Icomplete mode displays an indication of available completions when you are in the minibuffer and completion is active. @xref{Completion Options}. @item Line Number mode enables display of the current line number in the mode line. It is enabled by default. @xref{Mode Line}. @item Menu Bar mode gives each frame a menu bar. It is enabled by default. @xref{Menu Bars}. @item Scroll Bar mode gives each window a scroll bar. It is enabled by default, but the scroll bar is only displayed on graphical terminals. @xref{Scroll Bars}. @item Tool Bar mode gives each frame a tool bar. It is enabled by default, but the tool bar is only displayed on graphical terminals. @xref{Tool Bars}. @item Transient Mark mode highlights the region, and makes many Emacs commands operate on the region when the mark is active. It is enabled by default. @xref{Mark}. @end itemize @node Easy Customization @section Easy Customization Interface @cindex settings Emacs has many @dfn{settings} which have values that you can change. Many are documented in this manual. Most settings are @dfn{user options}---that is to say, Lisp variables (@pxref{Variables})---and their names appear in the Variable Index (@pxref{Variable Index}). The other settings are faces and their attributes (@pxref{Faces}). @findex customize @cindex customization buffer You can browse settings and change them using @kbd{M-x customize}. This creates a @dfn{customization buffer}, which lets you navigate through a logically organized list of settings, edit and set their values, and save them permanently in your initialization file (@pxref{Init File}). @menu * Customization Groups:: How settings are classified in a structure. * Browsing Custom:: Browsing and searching for settings. * Changing a Variable:: How to edit an option's value and set the option. * Saving Customizations:: Specifying the file for saving customizations. * Face Customization:: How to edit the attributes of a face. * Specific Customization:: Making a customization buffer for specific variables, faces, or groups. * Custom Themes:: How to define collections of customized options that can be loaded and unloaded together. @end menu @node Customization Groups @subsection Customization Groups @cindex customization groups For customization purposes, settings are organized into @dfn{groups} to help you find them. Groups are collected into bigger groups, all the way up to a master group called @code{Emacs}. @kbd{M-x customize} creates a customization buffer that shows the top-level @code{Emacs} group and the second-level groups immediately under it. It looks like this, in part: @c we want the buffer example to all be on one page, but unfortunately @c that's quite a bit of text, so force all space to the bottom. @page @smallexample @group /- Emacs group: Customization of the One True Editor. -------------\ [State]: visible group members are all at standard values. See also [Manual]. [Editing] : Basic text editing facilities. [External] : Interfacing to external utilities. @var{more second-level groups} \- Emacs group end ------------------------------------------------/ @end group @end smallexample @noindent This says that the buffer displays the contents of the @code{Emacs} group. The other groups are listed because they are its contents. But they are listed differently, without indentation and dashes, because @emph{their} contents are not included. Each group has a single-line documentation string; the @code{Emacs} group also has a @samp{[State]} line. @cindex editable fields (customization buffer) @cindex buttons (customization buffer) @cindex links (customization buffer) Most of the text in the customization buffer is read-only, but it typically includes some @dfn{editable fields} that you can edit. There are also @dfn{buttons} and @dfn{links}, which do something when you @dfn{invoke} them. To invoke a button or a link, either click on it with @kbd{Mouse-1}, or move point to it and type @key{RET}. For example, the phrase @samp{[State]} that appears in a second-level group is a button. It operates on the same customization buffer. Each group name, such as @samp{[Editing]}, is a hypertext link to that group; invoking it creates a new customization buffer, showing the group and its contents. The @code{Emacs} group only contains other groups. These groups, in turn, can contain settings or still more groups. By browsing the hierarchy of groups, you will eventually find the feature you are interested in customizing. Then you can use the customization buffer to set that feature's settings. You can also go straight to a particular group by name, using the command @kbd{M-x customize-group}. @node Browsing Custom @subsection Browsing and Searching for Options and Faces @findex customize-browse @kbd{M-x customize-browse} is another way to browse the available settings. This command creates a special customization buffer which shows only the names of groups and settings, and puts them in a structure. In this buffer, you can show the contents of a group by invoking the @samp{[+]} button. When the group contents are visible, this button changes to @samp{[-]}; invoking that hides the group contents again. Each group or setting in this buffer has a link which says @samp{[Group]}, @samp{[Option]} or @samp{[Face]}. Invoking this link creates an ordinary customization buffer showing just that group and its contents, just that user option, or just that face. This is the way to change settings that you find with @kbd{M-x customize-browse}. If you can guess part of the name of the settings you are interested in, @kbd{M-x customize-apropos} is another way to search for settings. However, unlike @code{customize} and @code{customize-browse}, @code{customize-apropos} can only find groups and settings that are loaded in the current Emacs session. @xref{Specific Customization,, Customizing Specific Items}. @node Changing a Variable @subsection Changing a Variable Here is an example of what a variable (a user option) looks like in the customization buffer: @smallexample Kill Ring Max: [Hide Value] 60 [State]: STANDARD. Maximum length of kill ring before oldest elements are thrown away. @end smallexample The text following @samp{[Hide Value]}, @samp{60} in this case, indicates the current value of the variable. If you see @samp{[Show Value]} instead of @samp{[Hide Value]}, it means that the value is hidden; the customization buffer initially hides values that take up several lines. Invoke @samp{[Show Value]} to show the value. The line after the variable name indicates the @dfn{customization state} of the variable: in the example above, it says you have not changed the option yet. The @samp{[State]} button at the beginning of this line gives you a menu of various operations for customizing the variable. The line after the @samp{[State]} line displays the beginning of the variable's documentation string. If there are more lines of documentation, this line ends with a @samp{[More]} button; invoke that to show the full documentation string. To enter a new value for @samp{Kill Ring Max}, move point to the value and edit it textually. For example, you can type @kbd{M-d}, then insert another number. As you begin to alter the text, you will see the @samp{[State]} line change to say that you have edited the value: @smallexample [State]: EDITED, shown value does not take effect until you set or @r{@dots{}} save it. @end smallexample @cindex user options, how to set @cindex variables, how to set @cindex settings, how to set Editing the value does not actually set the variable. To do that, you must @dfn{set} the variable. To do this, invoke the @samp{[State]} button and choose @samp{Set for Current Session}. The state of the variable changes visibly when you set it: @smallexample [State]: SET for current session only. @end smallexample You don't have to worry about specifying a value that is not valid; the @samp{Set for Current Session} operation checks for validity and will not install an unacceptable value. @kindex M-TAB @r{(customization buffer)} @findex widget-complete While editing a field that is a file name, directory name, command name, or anything else for which completion is defined, you can type @kbd{M-@key{TAB}} (@code{widget-complete}) to do completion. (@kbd{@key{ESC} @key{TAB}} and @kbd{C-M-i} do the same thing.) Some variables have a small fixed set of possible legitimate values. These variables don't let you edit the value textually. Instead, a @samp{[Value Menu]} button appears before the value; invoke this button to change the value. For a boolean ``on or off'' value, the button says @samp{[Toggle]}, and it changes to the other value. @samp{[Value Menu]} and @samp{[Toggle]} simply edit the buffer; the changes take real effect when you use the @samp{Set for Current Session} operation. Some variables have values with complex structure. For example, the value of @code{file-coding-system-alist} is an association list. Here is how it appears in the customization buffer: @smallexample File Coding System Alist: [Hide Value] [INS] [DEL] File regexp: \.elc\' Choice: [Value Menu] Encoding/decoding pair: Decoding: emacs-mule Encoding: emacs-mule [INS] [DEL] File regexp: \(\`\|/\)loaddefs.el\' Choice: [Value Menu] Encoding/decoding pair: Decoding: raw-text Encoding: raw-text-unix [INS] [DEL] File regexp: \.tar\' Choice: [Value Menu] Encoding/decoding pair: Decoding: no-conversion Encoding: no-conversion [INS] [DEL] File regexp: Choice: [Value Menu] Encoding/decoding pair: Decoding: undecided Encoding: nil [INS] [State]: STANDARD. Alist to decide a coding system to use for a file I/O @r{@dots{}} operation. [Hide Rest] The format is ((PATTERN . VAL) ...), where PATTERN is a regular expression matching a file name, @r{[@dots{}more lines of documentation@dots{}]} @end smallexample @noindent Each association in the list appears on four lines, with several editable fields and/or buttons. You can edit the regexps and coding systems using ordinary editing commands. You can also invoke @samp{[Value Menu]} to switch to a different kind of value---for instance, to specify a function instead of a pair of coding systems. To delete an association from the list, invoke the @samp{[DEL]} button for that item. To add an association, invoke @samp{[INS]} at the position where you want to add it. There is an @samp{[INS]} button between each pair of associations, another at the beginning and another at the end, so you can add a new association at any position in the list. @kindex TAB @r{(customization buffer)} @kindex S-TAB @r{(customization buffer)} @findex widget-forward @findex widget-backward Two special commands, @key{TAB} and @kbd{S-@key{TAB}}, are useful for moving through the customization buffer. @key{TAB} (@code{widget-forward}) moves forward to the next button or editable field; @kbd{S-@key{TAB}} (@code{widget-backward}) moves backward to the previous button or editable field. Typing @key{RET} on an editable field also moves forward, just like @key{TAB}. You can thus type @key{RET} when you are finished editing a field, to move on to the next button or field. To insert a newline within an editable field, use @kbd{C-o} or @kbd{C-q C-j}. @cindex saving a setting @cindex settings, how to save Setting the variable changes its value in the current Emacs session; @dfn{saving} the value changes it for future sessions as well. To save the variable, invoke @samp{[State]} and select the @samp{Save for Future Sessions} operation. This works by writing code so as to set the variable again, each time you start Emacs (@pxref{Saving Customizations}). You can also restore the variable to its standard value by invoking @samp{[State]} and selecting the @samp{Erase Customization} operation. There are actually four reset operations: @table @samp @item Undo Edits If you have made some modifications and not yet set the variable, this restores the text in the customization buffer to match the actual value. @item Reset to Saved This restores the value of the variable to the last saved value, and updates the text accordingly. @item Erase Customization This sets the variable to its standard value, and updates the text accordingly. This also eliminates any saved value for the variable, so that you will get the standard value in future Emacs sessions. @item Set to Backup Value This sets the variable to a previous value that was set in the customization buffer in this session. If you customize a variable and then reset it, which discards the customized value, you can get the discarded value back again with this operation. @end table @cindex comments on customized settings Sometimes it is useful to record a comment about a specific customization. Use the @samp{Add Comment} item from the @samp{[State]} menu to create a field for entering the comment. The comment you enter will be saved, and displayed again if you again view the same variable in a customization buffer, even in another session. The state of a group indicates whether anything in that group has been edited, set or saved. Near the top of the customization buffer there are two lines of buttons: @smallexample [Set for Current Session] [Save for Future Sessions] [Undo Edits] [Reset to Saved] [Erase Customization] [Finish] @end smallexample @vindex custom-buffer-done-function @noindent Invoking @samp{[Finish]} either buries or kills this customization buffer according to the setting of the option @code{custom-buffer-done-kill}; the default is to bury the buffer. Each of the other buttons performs an operation---set, save or reset---on each of the settings in the buffer that could meaningfully be set, saved or reset. They do not operate on settings whose values are hidden, nor on subgroups which are hidden or not visible in the buffer. @node Saving Customizations @subsection Saving Customizations @vindex custom-file Saving customizations from the customization buffer works by writing code to a file. By reading this code, future sessions can set up the customizations again. Normally, the code is saved in your initialization file (@pxref{Init File}). You can choose to save your customizations in a file other than your initialization file. To make this work, you must add a couple of lines of code to your initialization file, to set the variable @code{custom-file} to the name of the desired file, and to load that file. For example: @example (setq custom-file "~/.emacs-custom.el") (load custom-file) @end example You can use @code{custom-file} to specify different customization files for different Emacs versions, like this: @example (cond ((< emacs-major-version 22) ;; @r{Emacs 21 customization.} (setq custom-file "~/.custom-21.el")) ((and (= emacs-major-version 22) (< emacs-minor-version 3)) ;; @r{Emacs 22 customization, before version 22.3.} (setq custom-file "~/.custom-22.el")) (t ;; @r{Emacs version 22.3 or later.} (setq custom-file "~/.emacs-custom.el"))) (load custom-file) @end example If Emacs was invoked with the @option{-q} or @option{--no-init-file} options (@pxref{Initial Options}), it will not let you save your customizations in your initialization file. This is because saving customizations from such a session would wipe out all the other customizations you might have on your initialization file. @node Face Customization @subsection Customizing Faces @cindex customizing faces @cindex bold font @cindex italic font @cindex fonts and faces In addition to variables, some customization groups also include faces. When you show the contents of a group, both the variables and the faces in the group appear in the customization buffer. Here is an example of how a face looks: @smallexample Custom Changed Face:(sample) [Hide Face] [State]: STANDARD. Face used when the customize item has been changed. Parent groups: [Custom Magic Faces] Attributes: [ ] Font Family: * [ ] Width: * [ ] Height: * [ ] Weight: * [ ] Slant: * [ ] Underline: * [ ] Overline: * [ ] Strike-through: * [ ] Box around text: * [ ] Inverse-video: * [X] Foreground: white (sample) [X] Background: blue (sample) [ ] Stipple: * [ ] Inherit: * @end smallexample Each face attribute has its own line. The @samp{[@var{x}]} button before the attribute name indicates whether the attribute is @dfn{enabled}; @samp{[X]} means that it's enabled, and @samp{[ ]} means that it's disabled. You can enable or disable the attribute by clicking that button. When the attribute is enabled, you can change the attribute value in the usual ways. For the colors, you can specify a color name (use @kbd{M-x list-colors-display} for a list of them) or a hexadecimal color specification of the form @samp{#@var{rr}@var{gg}@var{bb}}. (@samp{#000000} is black, @samp{#ff0000} is red, @samp{#00ff00} is green, @samp{#0000ff} is blue, and @samp{#ffffff} is white.) On a black-and-white display, the colors you can use for the background are @samp{black}, @samp{white}, @samp{gray}, @samp{gray1}, and @samp{gray3}. Emacs supports these shades of gray by using background stipple patterns instead of a color. Setting, saving and resetting a face work like the same operations for variables (@pxref{Changing a Variable}). A face can specify different appearances for different types of display. For example, a face can make text red on a color display, but use a bold font on a monochrome display. To specify multiple appearances for a face, select @samp{For All Kinds of Displays} in the menu you get from invoking @samp{[State]}. @findex modify-face Another more basic way to set the attributes of a specific face is with @kbd{M-x modify-face}. This command reads the name of a face, then reads the attributes one by one. For the color and stipple attributes, the attribute's current value is the default---type just @key{RET} if you don't want to change that attribute. Type @samp{none} if you want to clear out the attribute. @node Specific Customization @subsection Customizing Specific Items Instead of finding the setting you want to change by navigating the structure of groups, here are other ways to specify the settings that you want to customize. @table @kbd @item M-x customize-option @key{RET} @var{option} @key{RET} Set up a customization buffer with just one user option variable, @var{option}. @item M-x customize-face @key{RET} @var{face} @key{RET} Set up a customization buffer with just one face, @var{face}. @item M-x customize-group @key{RET} @var{group} @key{RET} Set up a customization buffer with just one group, @var{group}. @item M-x customize-apropos @key{RET} @var{regexp} @key{RET} Set up a customization buffer with all the settings and groups that match @var{regexp}. @item M-x customize-changed @key{RET} @var{version} @key{RET} Set up a customization buffer with all the settings and groups whose meaning has changed since Emacs version @var{version}. @item M-x customize-saved Set up a customization buffer containing all settings that you have saved with customization buffers. @item M-x customize-unsaved Set up a customization buffer containing all settings that you have set but not saved. @end table @findex customize-option If you want to alter a particular user option with the customization buffer, and you know its name, you can use the command @kbd{M-x customize-option} and specify the user option (variable) name. This sets up the customization buffer with just one user option---the one that you asked for. Editing, setting and saving the value work as described above, but only for the specified user option. Minibuffer completion is handy if you only know part of the name. However, this command can only see options that have been loaded in the current Emacs session. @findex customize-face Likewise, you can modify a specific face, chosen by name, using @kbd{M-x customize-face}. By default it operates on the face used on the character after point. @findex customize-group You can also set up the customization buffer with a specific group, using @kbd{M-x customize-group}. The immediate contents of the chosen group, including settings (user options and faces), and other groups, all appear as well (even if not already loaded). However, the subgroups' own contents are not included. @findex customize-apropos For a more general way of controlling what to customize, you can use @kbd{M-x customize-apropos}. You specify a regular expression as argument; then all @emph{loaded} settings and groups whose names match this regular expression are set up in the customization buffer. If you specify an empty regular expression, this includes @emph{all} loaded groups and settings---which takes a long time to set up. @findex customize-changed When you upgrade to a new Emacs version, you might want to consider customizing new settings, and settings whose meanings or default values have changed. To do this, use @kbd{M-x customize-changed} and specify a previous Emacs version number using the minibuffer. It creates a customization buffer which shows all the settings and groups whose definitions have been changed since the specified version, loading them if necessary. @findex customize-saved @findex customize-unsaved If you change settings and then decide the change was a mistake, you can use two special commands to revisit your previous changes. Use @kbd{M-x customize-saved} to look at the settings that you have saved. Use @kbd{M-x customize-unsaved} to look at the settings that you have set but not saved. @node Custom Themes @subsection Customization Themes @cindex custom themes @dfn{Custom themes} are collections of settings that can be enabled or disabled as a unit. You can use Custom themes to switch quickly and easily between various collections of settings, and to transfer such collections from one computer to another. @findex customize-create-theme To define a Custom theme, use @kbd{M-x customize-create-theme}, which brings up a buffer named @samp{*New Custom Theme*}. At the top of the buffer is an editable field where you can specify the name of the theme. Click on the button labelled @samp{Insert Variable} to add a variable to the theme, and click on @samp{Insert Face} to add a face. You can edit these values in the @samp{*New Custom Theme*} buffer like in an ordinary Customize buffer. To remove an option from the theme, click on its @samp{State} button and select @samp{Delete}. @vindex custom-theme-directory After adding the desired options, click on @samp{Save Theme} to save the Custom theme. This writes the theme definition to a file @file{@var{foo}-theme.el} (where @var{foo} is the theme name you supplied), in the directory @file{~/.emacs.d/}. You can specify the directory by setting @code{custom-theme-directory}. You can view and edit the settings of a previously-defined theme by clicking on @samp{Visit Theme} and specifying the theme name. You can also import the variables and faces that you have set using Customize by visiting the ``special'' theme named @samp{user}. This theme, which records all the options that you set in the ordinary customization buffer, is always enabled, and always takes precedence over all other enabled Custom themes. Additionally, the @samp{user} theme is recorded with code in your @file{.emacs} file, rather than a @file{user-theme.el} file. @vindex custom-enabled-themes Once you have defined a Custom theme, you can use it by customizing the variable @code{custom-enabled-themes}. This is a list of Custom themes that are @dfn{enabled}, or put into effect. If you set @code{custom-enabled-themes} using the Customize interface, the theme definitions are automatically loaded from the theme files, if they aren't already. If you save the value of @code{custom-enabled-themes} for future Emacs sessions, those Custom themes will be enabled whenever Emacs is started up. If two enabled themes specify different values for an option, the theme occurring earlier in @code{custom-enabled-themes} takes effect. @findex load-theme @findex enable-theme @findex disable-theme You can temporarily enable a Custom theme with @kbd{M-x enable-theme}. This prompts for a theme name in the minibuffer, loads the theme from the theme file if necessary, and enables the theme. You can @dfn{disable} any enabled theme with the command @kbd{M-x disable-theme}; this returns the options specified in the theme to their original values. To re-enable the theme, type @kbd{M-x enable-theme} again. If a theme file is changed during your Emacs session, you can reload it by typing @kbd{M-x load-theme}. (This also enables the theme.) @node Variables @section Variables @cindex variable @cindex option, user @cindex user option A @dfn{variable} is a Lisp symbol which has a value. The symbol's name is also called the @dfn{variable name}. A variable name can contain any characters that can appear in a file, but most variable names consist of ordinary words separated by hyphens. The name of the variable serves as a compact description of its role. Most variables also have a @dfn{documentation string}, which describes what the variable's purpose is, what kind of value it should have, and how the value will be used. You can view this documentation using the help command @kbd{C-h v} (@code{describe-variable}). @xref{Examining}. Emacs uses many Lisp variables for internal record keeping, but the most interesting variables for a non-programmer user are those meant for users to change---these are called @dfn{user options}. @xref{Easy Customization}, for information about using the Customize facility to set user options. In the following sections, we describe will other aspects of Emacs variables, such as how to set them outside Customize. Emacs Lisp allows any variable (with a few exceptions) to have any kind of value. However, many variables are meaningful only if assigned values of a certain type. For example, only numbers are meaningful values for @code{kill-ring-max}, which specifies the maximum length of the kill ring (@pxref{Earlier Kills}); if you give @code{kill-ring-max} a string value, commands such as @kbd{C-y} (@code{yank}) will signal an error. On the other hand, some variables don't care about type; for instance, if a variable has one effect for @code{nil} values and another effect for ``non-@code{nil}'' values, then any value that is not the symbol @code{nil} induces the second effect, regardless of its type (by convention, we usually use the value @code{t}---a symbol which stands for ``true''---to specify a non-@code{nil} value). If you set a variable using the customization buffer, you need not worry about giving it an invalid type: the customization buffer usually only allows you to enter meaningful values. When in doubt, use @kbd{C-h v} (@code{describe-variable}) to check the variable's documentation string to see kind of value it expects (@pxref{Examining}). @menu * Examining:: Examining or setting one variable's value. * Hooks:: Hook variables let you specify programs for parts of Emacs to run on particular occasions. * Locals:: Per-buffer values of variables. * File Variables:: How files can specify variable values. * Directory Variables:: How variable values can be specified by directory. @end menu @node Examining @subsection Examining and Setting Variables @cindex setting variables @table @kbd @item C-h v @var{var} @key{RET} Display the value and documentation of variable @var{var} (@code{describe-variable}). @item M-x set-variable @key{RET} @var{var} @key{RET} @var{value} @key{RET} Change the value of variable @var{var} to @var{value}. @end table To examine the value of a single variable, use @kbd{C-h v} (@code{describe-variable}), which reads a variable name using the minibuffer, with completion. It displays both the value and the documentation of the variable. For example, @example C-h v fill-column @key{RET} @end example @noindent displays something like this: @smallexample fill-column is a variable defined in `C source code'. fill-column's value is 70 Local in buffer custom.texi; global value is 70 Automatically becomes buffer-local when set in any fashion. Automatically becomes buffer-local when set in any fashion. This variable is safe as a file local variable if its value satisfies the predicate `integerp'. Documentation: *Column beyond which automatic line-wrapping should happen. Interactively, you can set the buffer local value using C-x f. You can customize this variable. @end smallexample @noindent The line that says ``You can customize the variable'' indicates that this variable is a user option. @kbd{C-h v} is not restricted to user options; it allows any variable name. @findex set-variable The most convenient way to set a specific user option variable is with @kbd{M-x set-variable}. This reads the variable name with the minibuffer (with completion), and then reads a Lisp expression for the new value using the minibuffer a second time (you can insert the old value into the minibuffer for editing via @kbd{M-n}). For example, @example M-x set-variable @key{RET} fill-column @key{RET} 75 @key{RET} @end example @noindent sets @code{fill-column} to 75. @kbd{M-x set-variable} is limited to user option variables, but you can set any variable with a Lisp expression, using the function @code{setq}. Here is a @code{setq} expression to set @code{fill-column}: @example (setq fill-column 75) @end example To execute an expression like this one, go to the @samp{*scratch*} buffer, type in the expression, and then type @kbd{C-j}. @xref{Lisp Interaction}. Setting variables, like all means of customizing Emacs except where otherwise stated, affects only the current Emacs session. The only way to alter the variable in future sessions is to put something in your initialization file to set it those sessions (@pxref{Init File}). @node Hooks @subsection Hooks @cindex hook @cindex running a hook @dfn{Hooks} are an important mechanism for customizing Emacs. A hook is a Lisp variable which holds a list of functions, to be called on some well-defined occasion. (This is called @dfn{running the hook}.) The individual functions in the list are called the @dfn{hook functions} of the hook. With rare exceptions, hooks in Emacs are empty when Emacs starts up, so the only hook functions in any given hook are the ones you explicitly put there as customization. Most major modes run one or more @dfn{mode hooks} as the last step of initialization. This makes it easy for you to customize the behavior of the mode, by setting up a hook function to override the local variable assignments already made by the mode. But hooks are also used in other contexts. For example, the hook @code{kill-emacs-hook} runs just before quitting the Emacs job (@pxref{Exiting}). @cindex normal hook Most Emacs hooks are @dfn{normal hooks}. This means that running the hook operates by calling all the hook functions, unconditionally, with no arguments. We have made an effort to keep most hooks normal so that you can use them in a uniform way. Every variable in Emacs whose name ends in @samp{-hook} is a normal hook. @cindex abnormal hook There are also a few @dfn{abnormal hooks}. These variables' names end in @samp{-hooks} or @samp{-functions}, instead of @samp{-hook}. What makes these hooks abnormal is that there is something peculiar about the way its functions are called---perhaps they are given arguments, or perhaps the values they return are used in some way. For example, @code{find-file-not-found-functions} (@pxref{Visiting}) is abnormal because as soon as one hook function returns a non-@code{nil} value, the rest are not called at all. The documentation of each abnormal hook variable explains in detail what is peculiar about it. @findex add-hook You can set a hook variable with @code{setq} like any other Lisp variable, but the recommended way to add a hook function to a hook (either normal or abnormal) is by calling @code{add-hook}. @xref{Hooks,,, elisp, The Emacs Lisp Reference Manual}. For example, here's how to set up a hook to turn on Auto Fill mode when entering Text mode and other modes based on Text mode: @example (add-hook 'text-mode-hook 'turn-on-auto-fill) @end example The next example shows how to use a hook to customize the indentation of C code. (People often have strong personal preferences for one format compared to another.) Here the hook function is an anonymous lambda expression. @example @group (setq my-c-style '((c-comment-only-line-offset . 4) @end group @group (c-cleanup-list . (scope-operator empty-defun-braces defun-close-semi)) @end group @group (c-offsets-alist . ((arglist-close . c-lineup-arglist) (substatement-open . 0))))) @end group @group (add-hook 'c-mode-common-hook '(lambda () (c-add-style "my-style" my-c-style t))) @end group @end example It is best to design your hook functions so that the order in which they are executed does not matter. Any dependence on the order is ``asking for trouble.'' However, the order is predictable: the most recently added hook functions are executed first. @findex remove-hook If you play with adding various different versions of a hook function by calling @code{add-hook} over and over, remember that all the versions you added will remain in the hook variable together. You can clear out individual functions by calling @code{remove-hook}, or do @code{(setq @var{hook-variable} nil)} to remove everything. @node Locals @subsection Local Variables @table @kbd @item M-x make-local-variable @key{RET} @var{var} @key{RET} Make variable @var{var} have a local value in the current buffer. @item M-x kill-local-variable @key{RET} @var{var} @key{RET} Make variable @var{var} use its global value in the current buffer. @item M-x make-variable-buffer-local @key{RET} @var{var} @key{RET} Mark variable @var{var} so that setting it will make it local to the buffer that is current at that time. @end table @cindex local variables Almost any variable can be made @dfn{local} to a specific Emacs buffer. This means that its value in that buffer is independent of its value in other buffers. A few variables are always local in every buffer. Every other Emacs variable has a @dfn{global} value which is in effect in all buffers that have not made the variable local. @findex make-local-variable @kbd{M-x make-local-variable} reads the name of a variable and makes it local to the current buffer. Changing its value subsequently in this buffer will not affect others, and changes in its global value will not affect this buffer. @findex make-variable-buffer-local @cindex per-buffer variables @kbd{M-x make-variable-buffer-local} marks a variable so it will become local automatically whenever it is set. More precisely, once a variable has been marked in this way, the usual ways of setting the variable automatically do @code{make-local-variable} first. We call such variables @dfn{per-buffer} variables. Many variables in Emacs are normally per-buffer; the variable's document string tells you when this is so. A per-buffer variable's global value is normally never effective in any buffer, but it still has a meaning: it is the initial value of the variable for each new buffer. Major modes (@pxref{Major Modes}) always make variables local to the buffer before setting the variables. This is why changing major modes in one buffer has no effect on other buffers. Minor modes also work by setting variables---normally, each minor mode has one controlling variable which is non-@code{nil} when the mode is enabled (@pxref{Minor Modes}). For many minor modes, the controlling variable is per buffer, and thus always buffer-local. Otherwise, you can make it local in a specific buffer like any other variable. A few variables cannot be local to a buffer because they are always local to each display instead (@pxref{Multiple Displays}). If you try to make one of these variables buffer-local, you'll get an error message. @findex kill-local-variable @kbd{M-x kill-local-variable} makes a specified variable cease to be local to the current buffer. The global value of the variable henceforth is in effect in this buffer. Setting the major mode kills all the local variables of the buffer except for a few variables specially marked as @dfn{permanent locals}. @findex setq-default To set the global value of a variable, regardless of whether the variable has a local value in the current buffer, you can use the Lisp construct @code{setq-default}. This construct is used just like @code{setq}, but it sets variables' global values instead of their local values (if any). When the current buffer does have a local value, the new global value may not be visible until you switch to another buffer. Here is an example: @example (setq-default fill-column 75) @end example @noindent @code{setq-default} is the only way to set the global value of a variable that has been marked with @code{make-variable-buffer-local}. @findex default-value Lisp programs can use @code{default-value} to look at a variable's default value. This function takes a symbol as argument and returns its default value. The argument is evaluated; usually you must quote it explicitly. For example, here's how to obtain the default value of @code{fill-column}: @example (default-value 'fill-column) @end example @node File Variables @subsection Local Variables in Files @cindex local variables in files @cindex file local variables A file can specify local variable values for use when you edit the file with Emacs. Visiting the file checks for local variable specifications; it automatically makes these variables local to the buffer, and sets them to the values specified in the file. @menu * Specifying File Variables:: Specifying file local variables. * Safe File Variables:: Making sure file local variables are safe. @end menu @node Specifying File Variables @subsubsection Specifying File Variables There are two ways to specify file local variable values: in the first line, or with a local variables list. Here's how to specify them in the first line: @example -*- mode: @var{modename}; @var{var}: @var{value}; @dots{} -*- @end example @noindent You can specify any number of variable/value pairs in this way, each pair with a colon and semicolon as shown above. @code{mode: @var{modename};} specifies the major mode; this should come first in the line. The @var{value}s are not evaluated; they are used literally. Here is an example that specifies Lisp mode and sets two variables with numeric values: @smallexample ;; -*- mode: Lisp; fill-column: 75; comment-column: 50; -*- @end smallexample You can also specify the coding system for a file in this way: just specify a value for the ``variable'' named @code{coding}. The ``value'' must be a coding system name that Emacs recognizes. @xref{Coding Systems}. @w{@samp{unibyte: t}} specifies unibyte loading for a particular Lisp file. @xref{Enabling Multibyte}. The @code{eval} pseudo-variable, described below, can be specified in the first line as well. @cindex shell scripts, and local file variables @cindex man pages, and local file variables In shell scripts, the first line is used to identify the script interpreter, so you cannot put any local variables there. To accommodate this, Emacs looks for local variable specifications in the @emph{second} line when the first line specifies an interpreter. The same is true for man pages which start with the magic string @samp{'\"} to specify a list of troff preprocessors (not all do, however). A @dfn{local variables list} goes near the end of the file. It starts with a line containing the string @samp{Local Variables:}, and ends with a line containing the string @samp{End:}. In between come the variable names and values, one set per line, as @samp{@var{variable}:@: @var{value}}. The @var{value}s are not evaluated; they are used literally. If a file has both a local variables list and a @samp{-*-} line, Emacs processes @emph{everything} in the @samp{-*-} line first, and @emph{everything} in the local variables list afterward. Here is an example of a local variables list: @example /* Local Variables: */ /* mode:c */ /* comment-column:0 */ /* End: */ @end example In this example, each line starts with the prefix @samp{/*} and each line ends with the suffix @samp{*/}. Emacs recognizes these as the prefix and suffix by finding them surrounding the magic string @samp{Local Variables:}, on the first line of the list; it then automatically discards them from the other lines of the list. The usual reason for using a prefix and/or suffix is to embed the local variables list in a comment, so it won't confuse other programs that the file is intended as input for. The example above is for the C programming language, where comment lines start with @samp{/*} and end with @samp{*/}. Don't use a prefix (or a suffix) if you don't need one. If you write a multi-line string value, you should put the prefix and suffix on each line, even lines that start or end within the string. They will be stripped off for processing the list. If you want to split a long string across multiple lines of the file, you can use backslash-newline, which is ignored in Lisp string constants. Here's an example of doing this: @example # Local Variables: # compile-command: "cc foo.c -Dfoo=bar -Dhack=whatever \ # -Dmumble=blaah" # End: @end example Some ``variable names'' have special meanings in a local variables list. Specifying the ``variable'' @code{mode} really sets the major mode, while any value specified for the ``variable'' @code{eval} is simply evaluated as an expression (its value is ignored). A value for @code{coding} specifies the coding system for character code conversion of this file, and a value of @code{t} for @code{unibyte} says to visit the file in a unibyte buffer. These four ``variables'' are not really variables; setting them in any other context has no special meaning. @emph{If @code{mode} is used to set a major mode, it should be the first ``variable'' in the list.} Otherwise, the entries that precede it will usually be ignored, since most modes kill all local variables as part of their initialization. You can use the @code{mode} ``variable'' to set minor modes as well as the major modes; in fact, you can use it more than once, first to set the major mode and then to set minor modes which are specific to particular buffers. But most minor modes should not be specified in the file at all, because they represent user preferences. For example, you may be tempted to try to turn on Auto Fill mode with a local variable list. That is a mistake. The choice of Auto Fill mode or not is a matter of individual taste, not a matter of the contents of particular files. If you want to use Auto Fill, set up major mode hooks with your @file{.emacs} file to turn it on (when appropriate) for you alone (@pxref{Init File}). Don't use a local variable list to impose your taste on everyone. The start of the local variables list must be no more than 3000 characters from the end of the file, and must be in the last page if the file is divided into pages. Otherwise, Emacs will not notice it is there. The purpose of this rule is so that Emacs need not take the time to search the whole file. Use the command @code{normal-mode} to reset the local variables and major mode of a buffer according to the file name and contents, including the local variables list if any. @xref{Choosing Modes}. @node Safe File Variables @subsubsection Safety of File Variables File-local variables can be dangerous; when you visit someone else's file, there's no telling what its local variables list could do to your Emacs. Improper values of the @code{eval} ``variable,'' and other variables such as @code{load-path}, could execute Lisp code you didn't intend to run. Therefore, whenever Emacs encounters file local variable values that are not known to be safe, it displays the file's entire local variables list, and asks you for confirmation before setting them. You can type @kbd{y} or @key{SPC} to put the local variables list into effect, or @kbd{n} to ignore it. When Emacs is run in batch mode (@pxref{Initial Options}), it can't really ask you, so it assumes the answer @kbd{n}. Emacs normally recognizes certain variable/value pairs as safe. For instance, it is safe to give @code{comment-column} or @code{fill-column} any integer value. If a file specifies only known-safe variable/value pairs, Emacs does not ask for confirmation before setting them. Otherwise, you can tell Emacs to record all the variable/value pairs in this file as safe, by typing @kbd{!} at the confirmation prompt. When Emacs encounters these variable/value pairs subsequently, in the same file or others, it will assume they are safe. @vindex safe-local-variable-values @cindex risky variable Some variables, such as @code{load-path}, are considered particularly @dfn{risky}: there is seldom any reason to specify them as local variables, and changing them can be dangerous. If a file contains only risky local variables, Emacs neither offers nor accepts @kbd{!} as input at the confirmation prompt. If some of the local variables in a file are risky, and some are only potentially unsafe, you can enter @kbd{!} at the prompt. It applies all the variables, but only marks the non-risky ones as safe for the future. If you really want to record safe values for risky variables, do it directly by customizing @samp{safe-local-variable-values} (@pxref{Easy Customization}). @vindex enable-local-variables The variable @code{enable-local-variables} allows you to change the way Emacs processes local variables. Its default value is @code{t}, which specifies the behavior described above. If it is @code{nil}, Emacs simply ignores all file local variables. @code{:safe} means use only the safe values and ignore the rest. Any other value says to query you about each file that has local variables, without trying to determine whether the values are known to be safe. @vindex enable-local-eval The variable @code{enable-local-eval} controls whether Emacs processes @code{eval} variables. The three possibilities for the variable's value are @code{t}, @code{nil}, and anything else, just as for @code{enable-local-variables}. The default is @code{maybe}, which is neither @code{t} nor @code{nil}, so normally Emacs does ask for confirmation about processing @code{eval} variables. @vindex safe-local-eval-forms But there is an exception. The @code{safe-local-eval-forms} is a customizable list of eval forms which are safe. Emacs does not ask for confirmation when it finds these forms for the @code{eval} variable. @node Directory Variables @subsection Per-Directory Local Variables @cindex local variables, for all files in a directory @cindex directory local variables @cindex per-directory local variables A @dfn{project} is a collection of files on which you work together. Usually, the project's files are kept in one or more directories. Occasionally, you may wish to define Emacs settings that are common to all the files that belong to the project. Emacs provides two ways to specify settings that are applicable to files in a specific directory: you can put a special file in that directory, or you can define a @dfn{project class} for that directory. @cindex @file{.dir-locals.el} file If you put a file with a special name @file{.dir-locals.el}@footnote{ On MS-DOS, the name of this file should be @file{_dir-locals.el}, due to limitations of the DOS filesystems. If the filesystem is limited to 8+3 file names, the name of the file will be truncated by the OS to @file{_dir-loc.el}. } in a directory, Emacs will read it when it visits any file in that directory or any of its subdirectories, and apply the settings it specifies to the file's buffer. Emacs searches for @file{.dir-locals.el} starting in the directory of the visited file, and moving up the directory tree. (To avoid slowdown, this search is skipped for remote files.) The @file{.dir-locals.el} file should hold a specially-constructed list. This list maps Emacs mode names (symbols) to alists; each alist specifies values for variables to use when the respective mode is turned on. The special mode name @samp{nil} means that its alist applies to any mode. Instead of a mode name, you can specify a string that is a name of a subdirectory of the project's directory; then the corresponding alist applies to all the files in that subdirectory. Here's an example of a @file{.dir-locals.el} file: @example ((nil . ((indent-tabs-mode . t) (tab-width . 4) (fill-column . 80))) (c-mode . ((c-file-style . "BSD"))) (java-mode . ((c-file-style . "BSD"))) ("src/imported" . ((nil . ((change-log-default-name . "ChangeLog.local")))))) @end example @noindent This example shows some settings for a hypothetical project. It sets @samp{indent-tabs-mode}, @code{tab-width}, and @code{fill-column} for any file in the project's directory tree, and it sets the indentation style for any C or Java source file. Finally, it specifies a different @file{ChangeLog} file name for any file in the @file{src/imported} subdirectory of the directory where you put the @file{.dir-locals.el} file. @findex dir-locals-set-class-variables @findex dir-locals-set-directory-class Another method of specifying directory-local variables is to explicitly define a project class using @code{dir-locals-set-class-variables}, and then tell Emacs which directories correspond to that class, using @code{dir-locals-set-directory-class}. You can put calls to these functions in your @file{~/.emacs} init file; this can be useful when you can't put @file{.dir-locals.el} in the directory for some reason, or if you want to keep in a single place settings for several directories that don't have a common parent. For example, you could apply settings to an unwritable directory this way: @example (dir-locals-set-class-variables 'unwritable-directory '((nil . ((some-useful-setting . value))))) (dir-locals-set-directory-class "/usr/include/" 'unwritable-directory) @end example Unsafe directory-local variables are handled in the same way as unsafe file-local variables (@pxref{Safe File Variables}). @node Key Bindings @section Customizing Key Bindings @cindex key bindings This section describes @dfn{key bindings}, which map keys to commands, and @dfn{keymaps}, which record key bindings. It also explains how to customize key bindings. Recall that a command is a Lisp function whose definition provides for interactive use. Like every Lisp function, a command has a function name, which usually consists of lower-case letters and hyphens. @menu * Keymaps:: Generalities. The global keymap. * Prefix Keymaps:: Keymaps for prefix keys. * Local Keymaps:: Major and minor modes have their own keymaps. * Minibuffer Maps:: The minibuffer uses its own local keymaps. * Rebinding:: How to redefine one key's meaning conveniently. * Init Rebinding:: Rebinding keys with your init file, @file{.emacs}. * Modifier Keys:: Using modifier keys in key bindings. * Function Keys:: Rebinding terminal function keys. * Named ASCII Chars:: Distinguishing @key{TAB} from @kbd{C-i}, and so on. * Mouse Buttons:: Rebinding mouse buttons in Emacs. * Disabling:: Disabling a command means confirmation is required before it can be executed. This is done to protect beginners from surprises. @end menu @node Keymaps @subsection Keymaps @cindex keymap The bindings between key sequences and command functions are recorded in data structures called @dfn{keymaps}. Emacs has many of these, each used on particular occasions. A @dfn{key sequence} (@dfn{key}, for short) is a sequence of @dfn{input events} that have a meaning as a unit. Input events include characters, function keys and mouse buttons---all the inputs that you can send to the computer with your terminal. A key sequence gets its meaning from its @dfn{binding}, which says what command it runs. The role of keymaps is to record these bindings. @cindex global keymap The @dfn{global} keymap is the most important keymap because it is always in effect. The global keymap defines keys for Fundamental mode; most of these definitions are common to most or all major modes. Each major or minor mode can have its own keymap which overrides the global definitions of some keys. For example, a self-inserting character such as @kbd{g} is self-inserting because the global keymap binds it to the command @code{self-insert-command}. The standard Emacs editing characters such as @kbd{C-a} also get their standard meanings from the global keymap. Commands to rebind keys, such as @kbd{M-x global-set-key}, actually work by storing the new binding in the proper place in the global map. @xref{Rebinding}. @cindex function key Most modern keyboards have function keys as well as character keys. Function keys send input events just as character keys do, and keymaps can have bindings for them. On text terminals, typing a function key actually sends the computer a sequence of characters; the precise details of the sequence depends on which function key and on the model of terminal you are using. (Often the sequence starts with @kbd{@key{ESC} [}.) If Emacs understands your terminal type properly, it recognizes the character sequences forming function keys wherever they occur in a key sequence. Thus, for most purposes, you can pretend the function keys reach Emacs directly and ignore their encoding as character sequences. Key sequences can mix function keys and characters. For example, if your keyboard has a @key{Home} function key, Emacs also recognizes key sequences like @kbd{C-x @key{Home}}. You can even mix mouse events with keyboard events, but we recommend against it, because such key sequences are inconvenient to use. As a user, you can redefine any key, but it is usually best to stick to key sequences that consist of @kbd{C-c} followed by a letter (upper or lower case). These keys are ``reserved for users,'' so they won't conflict with any properly designed Emacs extension. The function keys @key{F5} through @key{F9} are also reserved for users. If you redefine some other key, your definition may be overridden by certain extensions or major modes which redefine the same key. @node Prefix Keymaps @subsection Prefix Keymaps Internally, Emacs records only single events in each keymap. Interpreting a key sequence of multiple events involves a chain of keymaps: the first keymap gives a definition for the first event, which is another keymap, which is used to look up the second event in the sequence, and so on. Thus, a prefix key such as @kbd{C-x} or @key{ESC} has its own keymap, which holds the definition for the event that immediately follows that prefix. The definition of a prefix key is usually the keymap to use for looking up the following event. The definition can also be a Lisp symbol whose function definition is the following keymap; the effect is the same, but it provides a command name for the prefix key that can be used as a description of what the prefix key is for. Thus, the binding of @kbd{C-x} is the symbol @code{Control-X-prefix}, whose function definition is the keymap for @kbd{C-x} commands. The definitions of @kbd{C-c}, @kbd{C-x}, @kbd{C-h} and @key{ESC} as prefix keys appear in the global map, so these prefix keys are always available. Aside from ordinary prefix keys, there is a fictitious ``prefix key'' which represents the menu bar; see @ref{Menu Bar,,,elisp, The Emacs Lisp Reference Manual}, for special information about menu bar key bindings. Mouse button events that invoke pop-up menus are also prefix keys; see @ref{Menu Keymaps,,,elisp, The Emacs Lisp Reference Manual}, for more details. Some prefix keymaps are stored in variables with names: @itemize @bullet @item @vindex ctl-x-map @code{ctl-x-map} is the variable name for the map used for characters that follow @kbd{C-x}. @item @vindex help-map @code{help-map} is for characters that follow @kbd{C-h}. @item @vindex esc-map @code{esc-map} is for characters that follow @key{ESC}. Thus, all Meta characters are actually defined by this map. @item @vindex ctl-x-4-map @code{ctl-x-4-map} is for characters that follow @kbd{C-x 4}. @item @vindex mode-specific-map @code{mode-specific-map} is for characters that follow @kbd{C-c}. @end itemize @node Local Keymaps @subsection Local Keymaps @cindex local keymap So far we have explained the ins and outs of the global map. Major modes customize Emacs by providing their own key bindings in @dfn{local keymaps}. For example, C mode overrides @key{TAB} to make it indent the current line for C code. Portions of text in the buffer can specify their own keymaps to substitute for the keymap of the buffer's major mode. @cindex minor mode keymap Minor modes can also have local keymaps. Whenever a minor mode is in effect, the definitions in its keymap override both the major mode's local keymap and the global keymap. A local keymap can locally redefine a key as a prefix key by defining it as a prefix keymap. If the key is also defined globally as a prefix, then its local and global definitions (both keymaps) effectively combine: both of them are used to look up the event that follows the prefix key. Thus, if the mode's local keymap defines @kbd{C-c} as another keymap, and that keymap defines @kbd{C-z} as a command, this provides a local meaning for @kbd{C-c C-z}. This does not affect other sequences that start with @kbd{C-c}; if those sequences don't have their own local bindings, their global bindings remain in effect. Another way to think of this is that Emacs handles a multi-event key sequence by looking in several keymaps, one by one, for a binding of the whole key sequence. First it checks the minor mode keymaps for minor modes that are enabled, then it checks the major mode's keymap, and then it checks the global keymap. This is not precisely how key lookup works, but it's good enough for understanding the results in ordinary circumstances. @cindex rebinding major mode keys Most major modes construct their keymaps when the mode is used for the first time in a session. If you wish to change one of these keymaps, you must use the major mode's @dfn{mode hook} (@pxref{Hooks}). @findex define-key For example, the command @code{texinfo-mode} to select Texinfo mode runs the hook @code{texinfo-mode-hook}. Here's how you can use the hook to add local bindings (not very useful, we admit) for @kbd{C-c n} and @kbd{C-c p} in Texinfo mode: @example (add-hook 'texinfo-mode-hook '(lambda () (define-key texinfo-mode-map "\C-cp" 'backward-paragraph) (define-key texinfo-mode-map "\C-cn" 'forward-paragraph))) @end example @node Minibuffer Maps @subsection Minibuffer Keymaps @cindex minibuffer keymaps @vindex minibuffer-local-map @vindex minibuffer-local-ns-map @vindex minibuffer-local-completion-map @vindex minibuffer-local-must-match-map @vindex minibuffer-local-filename-completion-map @vindex minibuffer-local-must-match-filename-map The minibuffer has its own set of local keymaps; they contain various completion and exit commands. @itemize @bullet @item @code{minibuffer-local-map} is used for ordinary input (no completion). @item @code{minibuffer-local-ns-map} is similar, except that @key{SPC} exits just like @key{RET}. This is used mainly for Mocklisp compatibility. @item @code{minibuffer-local-completion-map} is for permissive completion. @item @code{minibuffer-local-must-match-map} is for strict completion and for cautious completion. @item Finally, @code{minibuffer-local-filename-completion-map} and @code{minibuffer-local-must-match-filename-map} are like the two previous ones, but they are specifically for file name completion. They do not bind @key{SPC}. @end itemize @node Rebinding @subsection Changing Key Bindings Interactively @cindex key rebinding, this session @cindex redefining keys, this session The way to redefine an Emacs key is to change its entry in a keymap. You can change the global keymap, in which case the change is effective in all major modes (except those that have their own overriding local definitions for the same key). Or you can change the current buffer's local map, which affects all buffers using the same major mode. @findex global-set-key @findex local-set-key @findex global-unset-key @findex local-unset-key @table @kbd @item M-x global-set-key @key{RET} @var{key} @var{cmd} @key{RET} Define @var{key} globally to run @var{cmd}. @item M-x local-set-key @key{RET} @var{key} @var{cmd} @key{RET} Define @var{key} locally (in the major mode now in effect) to run @var{cmd}. @item M-x global-unset-key @key{RET} @var{key} Make @var{key} undefined in the global map. @item M-x local-unset-key @key{RET} @var{key} Make @var{key} undefined locally (in the major mode now in effect). @end table For example, suppose you like to execute commands in a subshell within an Emacs buffer, instead of suspending Emacs and executing commands in your login shell. Normally, @kbd{C-z} is bound to the function @code{suspend-emacs} (when not using the X Window System), but you can change @kbd{C-z} to invoke an interactive subshell within Emacs, by binding it to @code{shell} as follows: @example M-x global-set-key @key{RET} C-z shell @key{RET} @end example @noindent @code{global-set-key} reads the command name after the key. After you press the key, a message like this appears so that you can confirm that you are binding the key you want: @example Set key C-z to command: @end example You can redefine function keys and mouse events in the same way; just type the function key or click the mouse when it's time to specify the key to rebind. You can rebind a key that contains more than one event in the same way. Emacs keeps reading the key to rebind until it is a complete key (that is, not a prefix key). Thus, if you type @kbd{C-f} for @var{key}, that's the end; it enters the minibuffer immediately to read @var{cmd}. But if you type @kbd{C-x}, since that's a prefix, it reads another character; if that is @kbd{4}, another prefix character, it reads one more character, and so on. For example, @example M-x global-set-key @key{RET} C-x 4 $ spell-other-window @key{RET} @end example @noindent redefines @kbd{C-x 4 $} to run the (fictitious) command @code{spell-other-window}. You can remove the global definition of a key with @code{global-unset-key}. This makes the key @dfn{undefined}; if you type it, Emacs will just beep. Similarly, @code{local-unset-key} makes a key undefined in the current major mode keymap, which makes the global definition (or lack of one) come back into effect in that major mode. If you have redefined (or undefined) a key and you subsequently wish to retract the change, undefining the key will not do the job---you need to redefine the key with its standard definition. To find the name of the standard definition of a key, go to a Fundamental mode buffer in a fresh Emacs and use @kbd{C-h c}. The documentation of keys in this manual also lists their command names. If you want to prevent yourself from invoking a command by mistake, it is better to disable the command than to undefine the key. A disabled command is less work to invoke when you really want to. @xref{Disabling}. @node Init Rebinding @subsection Rebinding Keys in Your Init File @c This node is referenced in the tutorial. When renaming or deleting @c it, the tutorial needs to be adjusted. (TUTORIAL.de) If you have a set of key bindings that you like to use all the time, you can specify them in your initialization file by writing Lisp code (@pxref{Init File}). @findex kbd There are several ways to write a key binding using Lisp. The simplest is to use the @code{kbd} macro, which converts a textual representation of a key sequence---similar to how we have written key sequences in this manual---into a form that can be passed as an argument to @code{global-set-key}. For example, here's how to bind @kbd{C-z} to @code{shell} (@pxref{Interactive Shell}): @example (global-set-key (kbd "C-z") 'shell) @end example @noindent The single-quote before the command name, @code{shell}, marks it as a constant symbol rather than a variable. If you omit the quote, Emacs would try to evaluate @code{shell} as a variable. This probably causes an error; it certainly isn't what you want. Here are some additional examples, including binding function keys and mouse events: @example (global-set-key (kbd "C-c y") 'clipboard-yank) (global-set-key (kbd "C-M-q") 'query-replace) (global-set-key (kbd "<f5>") 'flyspell-mode) (global-set-key (kbd "C-<f5>") 'linum-mode) (global-set-key (kbd "C-<right>") 'forward-sentence) (global-set-key (kbd "<mouse-2>") 'mouse-save-then-kill) (global-set-key (kbd "C-<down-mouse-3>") 'mouse-yank-at-click) @end example Instead of using the @code{kbd} macro, you can use a Lisp string or vector to specify the key sequence. Using a string is simpler, but only works for @acronym{ASCII} characters and Meta-modified @acronym{ASCII} characters. For example, here's how to bind @kbd{C-x M-l} to @code{make-symbolic-link} (@pxref{Misc File Ops}): @example (global-set-key "\C-x\M-l" 'make-symbolic-link) @end example To put @key{TAB}, @key{RET}, @key{ESC}, or @key{DEL} in the string, use the Emacs Lisp escape sequences @samp{\t}, @samp{\r}, @samp{\e}, and @samp{\d} respectively. Here is an example which binds @kbd{C-x @key{TAB}} to @code{indent-rigidly} (@pxref{Indentation}): @example (global-set-key "\C-x\t" 'indent-rigidly) @end example When the key sequence includes function keys or mouse button events, or non-@acronym{ASCII} characters such as @code{C-=} or @code{H-a}, you must use a vector to specify the key sequence. Each element in the vector stands for an input event; the elements are separated by spaces and surrounded by a pair of square brackets. If an element is a symbol, simply write the symbol's name---no other delimiters or punctuation are needed. If a vector element is a character, write it as a Lisp character constant: @samp{?} followed by the character as it would appear in a string. Here are some examples: @example (global-set-key [?\C-=] 'make-symbolic-link) (global-set-key [?\M-\C-=] 'make-symbolic-link) (global-set-key [?\H-a] 'make-symbolic-link) (global-set-key [f7] 'make-symbolic-link) (global-set-key [C-mouse-1] 'make-symbolic-link) @end example @noindent You can use a vector for the simple cases too: @example (global-set-key [?\C-z ?\M-l] 'make-symbolic-link) @end example Language and coding systems may cause problems with key bindings for non-@acronym{ASCII} characters. @xref{Init Non-ASCII}. @node Modifier Keys @subsection Modifier Keys @cindex modifier keys The default key bindings in Emacs are set up so that modified alphabetical characters are case-insensitive. In other words, @kbd{C-A} does the same thing as @kbd{C-a}, and @kbd{M-A} does the same thing as @kbd{M-a}. This concerns only alphabetical characters, and does not apply to ``shifted'' versions of other keys; for instance, @kbd{C-@@} is not the same as @kbd{C-2}. When you customize Emacs, you can make modified alphabetical characters case-sensitive. For instance, you could make @kbd{M-a} and @kbd{M-A} run different commands. As a special exception, a @key{Control}-modified alphabetical character is always case-insensitive, for historical reasons: Emacs always treats @kbd{C-A} as @kbd{C-a}, @kbd{C-B} as @kbd{C-b}, and so forth. Although only the @key{Control} and @key{Meta} modifier keys are commonly used, Emacs supports three other modifier keys. These are called @key{Super}, @key{Hyper} and @key{Alt}. Few terminals provide ways to use these modifiers; the key labeled @key{Alt} on most keyboards usually issues the @key{Meta} modifier, not @key{Alt}. The standard key bindings in Emacs do not include any characters with these modifiers. However, you can customize Emacs to assign meanings to them. The modifier bits are labelled as @samp{s-}, @samp{H-} and @samp{A-} respectively. Even if your keyboard lacks these additional modifier keys, you can enter it using @kbd{C-x @@}: @kbd{C-x @@ h} adds the ``hyper'' flag to the next character, @kbd{C-x @@ s} adds the ``super'' flag, and @kbd{C-x @@ a} adds the ``alt'' flag. For instance, @kbd{C-x @@ h C-a} is a way to enter @kbd{Hyper-Control-a}. (Unfortunately, there is no way to add two modifiers by using @kbd{C-x @@} twice for the same character, because the first one goes to work on the @kbd{C-x}.) @node Function Keys @subsection Rebinding Function Keys Key sequences can contain function keys as well as ordinary characters. Just as Lisp characters (actually integers) represent keyboard characters, Lisp symbols represent function keys. If the function key has a word as its label, then that word is also the name of the corresponding Lisp symbol. Here are the conventional Lisp names for common function keys: @table @asis @item @code{left}, @code{up}, @code{right}, @code{down} Cursor arrow keys. @item @code{begin}, @code{end}, @code{home}, @code{next}, @code{prior} Other cursor repositioning keys. @item @code{select}, @code{print}, @code{execute}, @code{backtab} @itemx @code{insert}, @code{undo}, @code{redo}, @code{clearline} @itemx @code{insertline}, @code{deleteline}, @code{insertchar}, @code{deletechar} Miscellaneous function keys. @item @code{f1}, @code{f2}, @dots{} @code{f35} Numbered function keys (across the top of the keyboard). @item @code{kp-add}, @code{kp-subtract}, @code{kp-multiply}, @code{kp-divide} @itemx @code{kp-backtab}, @code{kp-space}, @code{kp-tab}, @code{kp-enter} @itemx @code{kp-separator}, @code{kp-decimal}, @code{kp-equal} Keypad keys (to the right of the regular keyboard), with names or punctuation. @item @code{kp-0}, @code{kp-1}, @dots{} @code{kp-9} Keypad keys with digits. @item @code{kp-f1}, @code{kp-f2}, @code{kp-f3}, @code{kp-f4} Keypad PF keys. @end table These names are conventional, but some systems (especially when using X) may use different names. To make certain what symbol is used for a given function key on your terminal, type @kbd{C-h c} followed by that key. @xref{Init Rebinding}, for examples of binding function keys. @cindex keypad Many keyboards have a ``numeric keypad'' on the right hand side. The numeric keys in the keypad double up as cursor motion keys, toggled by a key labeled @samp{Num Lock}. By default, Emacs translates these keys to the corresponding keys in the main keyboard. For example, when @samp{Num Lock} is on, the key labeled @samp{8} on the numeric keypad produces @code{kp-8}, which is translated to @kbd{8}; when @samp{Num Lock} is off, the same key produces @code{kp-up}, which is translated to @key{UP}. If you rebind a key such as @kbd{8} or @key{UP}, it affects the equivalent keypad key too. However, if you rebind a @samp{kp-} key directly, that won't affect its non-keypad equivalent. Note that the modified keys are not translated: for instance, if you hold down the @key{META} key while pressing the @samp{8} key on the numeric keypad, that generates @kbd{M-@key{kp-8}}. Emacs provides a convenient method for binding the numeric keypad keys, using the variables @code{keypad-setup}, @code{keypad-numlock-setup}, @code{keypad-shifted-setup}, and @code{keypad-numlock-shifted-setup}. These can be found in the @samp{keyboard} customization group (@pxref{Easy Customization}). You can rebind the keys to perform other tasks, such as issuing numeric prefix arguments. @node Named ASCII Chars @subsection Named @acronym{ASCII} Control Characters @key{TAB}, @key{RET}, @key{BS}, @key{LFD}, @key{ESC} and @key{DEL} started out as names for certain @acronym{ASCII} control characters, used so often that they have special keys of their own. For instance, @key{TAB} was another name for @kbd{C-i}. Later, users found it convenient to distinguish in Emacs between these keys and the ``same'' control characters typed with the @key{CTRL} key. Therefore, on most modern terminals, they are no longer the same: @key{TAB} is different from @kbd{C-i}. Emacs can distinguish these two kinds of input if the keyboard does. It treats the ``special'' keys as function keys named @code{tab}, @code{return}, @code{backspace}, @code{linefeed}, @code{escape}, and @code{delete}. These function keys translate automatically into the corresponding @acronym{ASCII} characters @emph{if} they have no bindings of their own. As a result, neither users nor Lisp programs need to pay attention to the distinction unless they care to. If you do not want to distinguish between (for example) @key{TAB} and @kbd{C-i}, make just one binding, for the @acronym{ASCII} character @key{TAB} (octal code 011). If you do want to distinguish, make one binding for this @acronym{ASCII} character, and another for the ``function key'' @code{tab}. With an ordinary @acronym{ASCII} terminal, there is no way to distinguish between @key{TAB} and @kbd{C-i} (and likewise for other such pairs), because the terminal sends the same character in both cases. @node Mouse Buttons @subsection Rebinding Mouse Buttons @cindex mouse button events @cindex rebinding mouse buttons @cindex click events @cindex drag events @cindex down events @cindex button down events Emacs uses Lisp symbols to designate mouse buttons, too. The ordinary mouse events in Emacs are @dfn{click} events; these happen when you press a button and release it without moving the mouse. You can also get @dfn{drag} events, when you move the mouse while holding the button down. Drag events happen when you finally let go of the button. The symbols for basic click events are @code{mouse-1} for the leftmost button, @code{mouse-2} for the next, and so on. Here is how you can redefine the second mouse button to split the current window: @example (global-set-key [mouse-2] 'split-window-vertically) @end example The symbols for drag events are similar, but have the prefix @samp{drag-} before the word @samp{mouse}. For example, dragging the first button generates a @code{drag-mouse-1} event. You can also define bindings for events that occur when a mouse button is pressed down. These events start with @samp{down-} instead of @samp{drag-}. Such events are generated only if they have key bindings. When you get a button-down event, a corresponding click or drag event will always follow. @cindex double clicks @cindex triple clicks If you wish, you can distinguish single, double, and triple clicks. A double click means clicking a mouse button twice in approximately the same place. The first click generates an ordinary click event. The second click, if it comes soon enough, generates a double-click event instead. The event type for a double-click event starts with @samp{double-}: for example, @code{double-mouse-3}. This means that you can give a special meaning to the second click at the same place, but it must act on the assumption that the ordinary single click definition has run when the first click was received. This constrains what you can do with double clicks, but user interface designers say that this constraint ought to be followed in any case. A double click should do something similar to the single click, only ``more so.'' The command for the double-click event should perform the extra work for the double click. If a double-click event has no binding, it changes to the corresponding single-click event. Thus, if you don't define a particular double click specially, it executes the single-click command twice. Emacs also supports triple-click events whose names start with @samp{triple-}. Emacs does not distinguish quadruple clicks as event types; clicks beyond the third generate additional triple-click events. However, the full number of clicks is recorded in the event list, so if you know Emacs Lisp you can distinguish if you really want to (@pxref{Click Events,,, elisp, The Emacs Lisp Reference Manual}). We don't recommend distinct meanings for more than three clicks, but sometimes it is useful for subsequent clicks to cycle through the same set of three meanings, so that four clicks are equivalent to one click, five are equivalent to two, and six are equivalent to three. Emacs also records multiple presses in drag and button-down events. For example, when you press a button twice, then move the mouse while holding the button, Emacs gets a @samp{double-drag-} event. And at the moment when you press it down for the second time, Emacs gets a @samp{double-down-} event (which is ignored, like all button-down events, if it has no binding). @vindex double-click-time The variable @code{double-click-time} specifies how much time can elapse between clicks and still allow them to be grouped as a multiple click. Its value is in units of milliseconds. If the value is @code{nil}, double clicks are not detected at all. If the value is @code{t}, then there is no time limit. The default is 500. @vindex double-click-fuzz The variable @code{double-click-fuzz} specifies how much the mouse can move between clicks and still allow them to be grouped as a multiple click. Its value is in units of pixels on windowed displays and in units of 1/8 of a character cell on text-mode terminals; the default is 3. The symbols for mouse events also indicate the status of the modifier keys, with the usual prefixes @samp{C-}, @samp{M-}, @samp{H-}, @samp{s-}, @samp{A-} and @samp{S-}. These always precede @samp{double-} or @samp{triple-}, which always precede @samp{drag-} or @samp{down-}. A frame includes areas that don't show text from the buffer, such as the mode line and the scroll bar. You can tell whether a mouse button comes from a special area of the screen by means of dummy ``prefix keys.'' For example, if you click the mouse in the mode line, you get the prefix key @code{mode-line} before the ordinary mouse-button symbol. Thus, here is how to define the command for clicking the first button in a mode line to run @code{scroll-up}: @example (global-set-key [mode-line mouse-1] 'scroll-up) @end example Here is the complete list of these dummy prefix keys and their meanings: @table @code @item mode-line The mouse was in the mode line of a window. @item vertical-line The mouse was in the vertical line separating side-by-side windows. (If you use scroll bars, they appear in place of these vertical lines.) @item vertical-scroll-bar The mouse was in a vertical scroll bar. (This is the only kind of scroll bar Emacs currently supports.) @item menu-bar The mouse was in the menu bar. @item header-line The mouse was in a header line. @ignore @item horizontal-scroll-bar The mouse was in a horizontal scroll bar. Horizontal scroll bars do horizontal scrolling, and people don't use them often. @end ignore @end table You can put more than one mouse button in a key sequence, but it isn't usual to do so. @node Disabling @subsection Disabling Commands @cindex disabled command Disabling a command means that invoking it interactively asks for confirmation from the user. The purpose of disabling a command is to prevent users from executing it by accident; we do this for commands that might be confusing to the uninitiated. Attempting to invoke a disabled command interactively in Emacs displays a window containing the command's name, its documentation, and some instructions on what to do immediately; then Emacs asks for input saying whether to execute the command as requested, enable it and execute it, or cancel. If you decide to enable the command, you must then answer another question---whether to do this permanently, or just for the current session. (Enabling permanently works by automatically editing your @file{.emacs} file.) You can also type @kbd{!} to enable @emph{all} commands, for the current session only. The direct mechanism for disabling a command is to put a non-@code{nil} @code{disabled} property on the Lisp symbol for the command. Here is the Lisp program to do this: @example (put 'delete-region 'disabled t) @end example If the value of the @code{disabled} property is a string, that string is included in the message displayed when the command is used: @example (put 'delete-region 'disabled "It's better to use `kill-region' instead.\n") @end example @findex disable-command @findex enable-command You can make a command disabled either by editing the @file{.emacs} file directly, or with the command @kbd{M-x disable-command}, which edits the @file{.emacs} file for you. Likewise, @kbd{M-x enable-command} edits @file{.emacs} to enable a command permanently. @xref{Init File}. If Emacs was invoked with the @option{-q} or @option{--no-init-file} options (@pxref{Initial Options}), it will not edit your @file{~/.emacs} init file. Doing so could lose information because Emacs has not read your init file. Whether a command is disabled is independent of what key is used to invoke it; disabling also applies if the command is invoked using @kbd{M-x}. However, disabling a command has no effect on calling it as a function from Lisp programs. @node Syntax @section The Syntax Table @cindex syntax table All the Emacs commands which parse words or balance parentheses are controlled by the @dfn{syntax table}. The syntax table says which characters are opening delimiters, which are parts of words, which are string quotes, and so on. It does this by assigning each character to one of fifteen-odd @dfn{syntax classes}. In some cases it specifies some additional information also. Each major mode has its own syntax table (though related major modes sometimes share one syntax table), which it installs in each buffer that uses the mode. The syntax table installed in the current buffer is the one that all commands use, so we call it ``the'' syntax table. @kindex C-h s @findex describe-syntax To display a description of the contents of the current syntax table, type @kbd{C-h s} (@code{describe-syntax}). The description of each character includes the string you would have to give to @code{modify-syntax-entry} to set up that character's current syntax, starting with the character which designates its syntax class, plus some English text to explain its meaning. A syntax table is actually a Lisp object, a char-table, whose elements are cons cells. For full information on the syntax table, see @ref{Syntax Tables,, Syntax Tables, elisp, The Emacs Lisp Reference Manual}. @node Init File @section The Init File, @file{~/.emacs} @cindex init file @cindex Emacs initialization file @cindex key rebinding, permanent @cindex rebinding keys, permanently @cindex startup (init file) When Emacs is started, it normally tries to load a Lisp program from an @dfn{initialization file}, or @dfn{init file} for short. This file, if it exists, specifies how to initialize Emacs for you. Emacs looks for your init file using the filenames @file{~/.emacs}, @file{~/.emacs.el}, or @file{~/.emacs.d/init.el}; you can choose to use any one of these three names (@pxref{Find Init}). Here, @file{~/} stands for your home directory. You can use the command line switch @samp{-q} to prevent loading your init file, and @samp{-u} (or @samp{--user}) to specify a different user's init file (@pxref{Initial Options}). @cindex @file{default.el}, the default init file There can also be a @dfn{default init file}, which is the library named @file{default.el}, found via the standard search path for libraries. The Emacs distribution contains no such library; your site may create one for local customizations. If this library exists, it is loaded whenever you start Emacs (except when you specify @samp{-q}). But your init file, if any, is loaded first; if it sets @code{inhibit-default-init} non-@code{nil}, then @file{default} is not loaded. @cindex site init file @cindex @file{site-start.el}, the site startup file Your site may also have a @dfn{site startup file}; this is named @file{site-start.el}, if it exists. Like @file{default.el}, Emacs finds this file via the standard search path for Lisp libraries. Emacs loads this library before it loads your init file. To inhibit loading of this library, use the option @samp{--no-site-file}. @xref{Initial Options}. We recommend against using @file{site-start.el} for changes that some users may not like. It is better to put them in @file{default.el}, so that users can more easily override them. You can place @file{default.el} and @file{site-start.el} in any of the directories which Emacs searches for Lisp libraries. The variable @code{load-path} (@pxref{Lisp Libraries}) specifies these directories. Many sites put these files in the @file{site-lisp} subdirectory of the Emacs installation directory, typically @file{/usr/local/share/emacs/site-lisp}. Byte-compiling your init file is not recommended (@pxref{Byte Compilation,, Byte Compilation, elisp, the Emacs Lisp Reference Manual}). It generally does not speed up startup very much, and often leads to problems when you forget to recompile the file. A better solution is to use the Emacs server to reduce the number of times you have to start Emacs (@pxref{Emacs Server}). If your init file defines many functions, consider moving them to a separate (byte-compiled) file that you load in your init file. If you are going to write actual Emacs Lisp programs that go beyond minor customization, you should read the @cite{Emacs Lisp Reference Manual}. @ifnottex @xref{Top, Emacs Lisp, Emacs Lisp, elisp, the Emacs Lisp Reference Manual}. @end ifnottex @menu * Init Syntax:: Syntax of constants in Emacs Lisp. * Init Examples:: How to do some things with an init file. * Terminal Init:: Each terminal type can have an init file. * Find Init:: How Emacs finds the init file. * Init Non-ASCII:: Using non-@acronym{ASCII} characters in an init file. @end menu @node Init Syntax @subsection Init File Syntax The init file contains one or more Lisp expressions. Each of these consists of a function name followed by arguments, all surrounded by parentheses. For example, @code{(setq fill-column 60)} calls the function @code{setq} to set the variable @code{fill-column} (@pxref{Filling}) to 60. You can set any Lisp variable with @code{setq}, but with certain variables @code{setq} won't do what you probably want in the @file{.emacs} file. Some variables automatically become buffer-local when set with @code{setq}; what you want in @file{.emacs} is to set the default value, using @code{setq-default}. Some customizable minor mode variables do special things to enable the mode when you set them with Customize, but ordinary @code{setq} won't do that; to enable the mode in your @file{.emacs} file, call the minor mode command. The following section has examples of both of these methods. The second argument to @code{setq} is an expression for the new value of the variable. This can be a constant, a variable, or a function call expression. In @file{.emacs}, constants are used most of the time. They can be: @table @asis @item Numbers: Numbers are written in decimal, with an optional initial minus sign. @item Strings: @cindex Lisp string syntax @cindex string syntax Lisp string syntax is the same as C string syntax with a few extra features. Use a double-quote character to begin and end a string constant. In a string, you can include newlines and special characters literally. But often it is cleaner to use backslash sequences for them: @samp{\n} for newline, @samp{\b} for backspace, @samp{\r} for carriage return, @samp{\t} for tab, @samp{\f} for formfeed (control-L), @samp{\e} for escape, @samp{\\} for a backslash, @samp{\"} for a double-quote, or @samp{\@var{ooo}} for the character whose octal code is @var{ooo}. Backslash and double-quote are the only characters for which backslash sequences are mandatory. @samp{\C-} can be used as a prefix for a control character, as in @samp{\C-s} for @acronym{ASCII} control-S, and @samp{\M-} can be used as a prefix for a Meta character, as in @samp{\M-a} for @kbd{Meta-A} or @samp{\M-\C-a} for @kbd{Control-Meta-A}.@refill @xref{Init Non-ASCII}, for information about including non-@acronym{ASCII} in your init file. @item Characters: Lisp character constant syntax consists of a @samp{?} followed by either a character or an escape sequence starting with @samp{\}. Examples: @code{?x}, @code{?\n}, @code{?\"}, @code{?\)}. Note that strings and characters are not interchangeable in Lisp; some contexts require one and some contexts require the other. @xref{Init Non-ASCII}, for information about binding commands to keys which send non-@acronym{ASCII} characters. @item True: @code{t} stands for `true'. @item False: @code{nil} stands for `false'. @item Other Lisp objects: Write a single-quote (@code{'}) followed by the Lisp object you want. @end table @node Init Examples @subsection Init File Examples Here are some examples of doing certain commonly desired things with Lisp expressions: @itemize @bullet @item Add a directory to the variable @code{load-path}. You can then put Lisp libraries that are not included with Emacs in this directory, and load them with @kbd{M-x load-library}. @xref{Lisp Libraries}. @example (add-to-list 'load-path "/path/to/lisp/libraries") @end example @item Make @key{TAB} in C mode just insert a tab if point is in the middle of a line. @example (setq c-tab-always-indent nil) @end example Here we have a variable whose value is normally @code{t} for `true' and the alternative is @code{nil} for `false'. @item Make searches case sensitive by default (in all buffers that do not override this). @example (setq-default case-fold-search nil) @end example This sets the default value, which is effective in all buffers that do not have local values for the variable. Setting @code{case-fold-search} with @code{setq} affects only the current buffer's local value, which is not what you probably want to do in an init file. @item @vindex user-mail-address Specify your own email address, if Emacs can't figure it out correctly. @example (setq user-mail-address "rumsfeld@@torture.gov") @end example Various Emacs packages that need your own email address use the value of @code{user-mail-address}. @item Make Text mode the default mode for new buffers. @example (setq default-major-mode 'text-mode) @end example Note that @code{text-mode} is used because it is the command for entering Text mode. The single-quote before it makes the symbol a constant; otherwise, @code{text-mode} would be treated as a variable name. @need 1500 @item Set up defaults for the Latin-1 character set which supports most of the languages of Western Europe. @example (set-language-environment "Latin-1") @end example @need 1500 @item Turn off Line Number mode, a global minor mode. @example (line-number-mode 0) @end example @need 1500 @item Turn on Auto Fill mode automatically in Text mode and related modes. @example (add-hook 'text-mode-hook '(lambda () (auto-fill-mode 1))) @end example This shows how to add a hook function to a normal hook variable (@pxref{Hooks}). The function we supply is a list starting with @code{lambda}, with a single-quote in front of it to make it a list constant rather than an expression. It's beyond the scope of this manual to explain Lisp functions, but for this example it is enough to know that the effect is to execute @code{(auto-fill-mode 1)} when Text mode is entered. You can replace that with any other expression that you like, or with several expressions in a row. Emacs comes with a function named @code{turn-on-auto-fill} whose definition is @code{(lambda () (auto-fill-mode 1))}. Thus, a simpler way to write the above example is as follows: @example (add-hook 'text-mode-hook 'turn-on-auto-fill) @end example @item Load the installed Lisp library named @file{foo} (actually a file @file{foo.elc} or @file{foo.el} in a standard Emacs directory). @example (load "foo") @end example When the argument to @code{load} is a relative file name, not starting with @samp{/} or @samp{~}, @code{load} searches the directories in @code{load-path} (@pxref{Lisp Libraries}). @item Load the compiled Lisp file @file{foo.elc} from your home directory. @example (load "~/foo.elc") @end example Here an absolute file name is used, so no searching is done. @item @cindex loading Lisp libraries automatically @cindex autoload Lisp libraries Tell Emacs to find the definition for the function @code{myfunction} by loading a Lisp library named @file{mypackage} (i.e.@: a file @file{mypackage.elc} or @file{mypackage.el}): @example (autoload 'myfunction "mypackage" "Do what I say." t) @end example @noindent Here the string @code{"Do what I say."} is the function's documentation string. You specify it in the @code{autoload} definition so it will be available for help commands even when the package is not loaded. The last argument, @code{t}, indicates that this function is interactive; that is, it can be invoked interactively by typing @kbd{M-x myfunction @key{RET}} or by binding it to a key. If the function is not interactive, omit the @code{t} or use @code{nil}. @item Rebind the key @kbd{C-x l} to run the function @code{make-symbolic-link} (@pxref{Init Rebinding}). @example (global-set-key "\C-xl" 'make-symbolic-link) @end example or @example (define-key global-map "\C-xl" 'make-symbolic-link) @end example Note once again the single-quote used to refer to the symbol @code{make-symbolic-link} instead of its value as a variable. @item Do the same thing for Lisp mode only. @example (define-key lisp-mode-map "\C-xl" 'make-symbolic-link) @end example @item Redefine all keys which now run @code{next-line} in Fundamental mode so that they run @code{forward-line} instead. @findex substitute-key-definition @example (substitute-key-definition 'next-line 'forward-line global-map) @end example @item Make @kbd{C-x C-v} undefined. @example (global-unset-key "\C-x\C-v") @end example One reason to undefine a key is so that you can make it a prefix. Simply defining @kbd{C-x C-v @var{anything}} will make @kbd{C-x C-v} a prefix, but @kbd{C-x C-v} must first be freed of its usual non-prefix definition. @item Make @samp{$} have the syntax of punctuation in Text mode. Note the use of a character constant for @samp{$}. @example (modify-syntax-entry ?\$ "." text-mode-syntax-table) @end example @item Enable the use of the command @code{narrow-to-region} without confirmation. @example (put 'narrow-to-region 'disabled nil) @end example @item Adjusting the configuration to various platforms and Emacs versions. Users typically want Emacs to behave the same on all systems, so the same init file is right for all platforms. However, sometimes it happens that a function you use for customizing Emacs is not available on some platforms or in older Emacs versions. To deal with that situation, put the customization inside a conditional that tests whether the function or facility is available, like this: @example (if (fboundp 'blink-cursor-mode) (blink-cursor-mode 0)) (if (boundp 'coding-category-utf-8) (set-coding-priority '(coding-category-utf-8))) @end example @noindent You can also simply disregard the errors that occur if the function is not defined. @example (condition case () (set-face-background 'region "grey75") (error nil)) @end example A @code{setq} on a variable which does not exist is generally harmless, so those do not need a conditional. @end itemize @node Terminal Init @subsection Terminal-specific Initialization Each terminal type can have a Lisp library to be loaded into Emacs when it is run on that type of terminal. For a terminal type named @var{termtype}, the library is called @file{term/@var{termtype}} and it is found by searching the directories @code{load-path} as usual and trying the suffixes @samp{.elc} and @samp{.el}. Normally it appears in the subdirectory @file{term} of the directory where most Emacs libraries are kept.@refill The usual purpose of the terminal-specific library is to map the escape sequences used by the terminal's function keys onto more meaningful names, using @code{input-decode-map} (or @code{function-key-map} before it). See the file @file{term/lk201.el} for an example of how this is done. Many function keys are mapped automatically according to the information in the Termcap data base; the terminal-specific library needs to map only the function keys that Termcap does not specify. When the terminal type contains a hyphen, only the part of the name before the first hyphen is significant in choosing the library name. Thus, terminal types @samp{aaa-48} and @samp{aaa-30-rv} both use the library @file{term/aaa}. The code in the library can use @code{(getenv "TERM")} to find the full terminal type name.@refill @vindex term-file-prefix The library's name is constructed by concatenating the value of the variable @code{term-file-prefix} and the terminal type. Your @file{.emacs} file can prevent the loading of the terminal-specific library by setting @code{term-file-prefix} to @code{nil}. @vindex term-setup-hook Emacs runs the hook @code{term-setup-hook} at the end of initialization, after both your @file{.emacs} file and any terminal-specific library have been read in. Add hook functions to this hook if you wish to override part of any of the terminal-specific libraries and to define initializations for terminals that do not have a library. @xref{Hooks}. @node Find Init @subsection How Emacs Finds Your Init File Normally Emacs uses the environment variable @env{HOME} (@pxref{General Variables, HOME}) to find @file{.emacs}; that's what @samp{~} means in a file name. If @file{.emacs} is not found inside @file{~/} (nor @file{.emacs.el}), Emacs looks for @file{~/.emacs.d/init.el} (which, like @file{~/.emacs.el}, can be byte-compiled). However, if you run Emacs from a shell started by @code{su}, Emacs tries to find your own @file{.emacs}, not that of the user you are currently pretending to be. The idea is that you should get your own editor customizations even if you are running as the super user. More precisely, Emacs first determines which user's init file to use. It gets your user name from the environment variables @env{LOGNAME} and @env{USER}; if neither of those exists, it uses effective user-ID. If that user name matches the real user-ID, then Emacs uses @env{HOME}; otherwise, it looks up the home directory corresponding to that user name in the system's data base of users. @c LocalWords: backtab @node Init Non-ASCII @subsection Non-@acronym{ASCII} Characters in Init Files @cindex international characters in @file{.emacs} @cindex non-@acronym{ASCII} characters in @file{.emacs} @cindex non-@acronym{ASCII} keys, binding @cindex rebinding non-@acronym{ASCII} keys Language and coding systems may cause problems if your init file contains non-@acronym{ASCII} characters, such as accented letters, in strings or key bindings. If you want to use non-@acronym{ASCII} characters in your init file, you should put a @w{@samp{-*-coding: @var{coding-system}-*-}} tag on the first line of the init file, and specify a coding system that supports the character(s) in question. @xref{Recognize Coding}. This is because the defaults for decoding non-@acronym{ASCII} text might not yet be set up by the time Emacs reads those parts of your init file which use such strings, possibly leading Emacs to decode those strings incorrectly. You should then avoid adding Emacs Lisp code that modifies the coding system in other ways, such as calls to @code{set-language-environment}. To bind non-@acronym{ASCII} keys, you must use a vector (@pxref{Init Rebinding}). The string syntax cannot be used, since the non-@acronym{ASCII} characters will be interpreted as meta keys. For instance: @example (global-set-key [?@var{char}] 'some-function) @end example @noindent Type @kbd{C-q}, followed by the key you want to bind, to insert @var{char}. @strong{Warning:} if you change the keyboard encoding, or change between multibyte and unibyte mode, or anything that would alter which code @kbd{C-q} would insert for that character, this key binding may stop working. It is therefore advisable to use one and only one coding system, for your init file as well as the files you edit. For example, don't mix the @samp{latin-1} and @samp{latin-9} coding systems. @ignore arch-tag: c68abddb-4410-4fb5-925f-63394e971d93 @end ignore