view lisp/w32-fns.el @ 25976:8565fbac98d7

Use "pop3" as the POP service name on all platforms, instead of using "pop" on Unix and "pop3" on Windows NT. "pop3" has been the standard service name since RFC 1340 was published in July 1992, so I think it's safe to start using it by default.

;;; w32-fns.el --- Lisp routines for Windows NT.

;; Copyright (C) 1994 Free Software Foundation, Inc.

;; Author: Geoff Voelker <[e-mail]>

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Commentary:

;; (August 12, 1993)
;; Created.

;; (November 21, 1994)
;; [C-M-backspace] defined.
;; mode-line-format defined to show buffer file type.
;; audio bell initialized.

;;; Code:

;; Map delete and backspace
(define-key function-key-map [backspace] "\177")
(define-key function-key-map [delete] "\C-d")
(define-key function-key-map [M-backspace] [?\M-\177])
(define-key function-key-map [C-M-backspace] [\C-\M-delete])

;; Ignore case on file-name completion
(setq completion-ignore-case t)

;; Map all versions of a filename (8.3, longname, mixed case) to the 
;; same buffer.
(setq find-file-visit-truename t)

(defvar w32-system-shells '("cmd" "cmd.exe" "command" "command.com"
			    "4nt" "4nt.exe" "4dos" "4dos.exe"
			    "ndos" "ndos.exe")
  "List of strings recognized as Windows NT/9X system shells.")

(defun w32-using-nt ()
  "Return t if literally running on Windows NT (i.e., not Windows 9X)."
  (and (eq system-type 'windows-nt) (getenv "SystemRoot")))

(defun w32-shell-name ()
  "Return the name of the shell being used."
  (or (and (boundp 'explicit-shell-file-name) explicit-shell-file-name)
      (getenv "ESHELL")
      (getenv "SHELL")
      (and (w32-using-nt) "cmd.exe")
      "command.com"))

(defun w32-system-shell-p (shell-name)
  (and shell-name
       (member (downcase (file-name-nondirectory shell-name)) 
	       w32-system-shells)))

(defun w32-shell-dos-semantics ()
  "Return t if the interactive shell being used expects msdos shell semantics."
  (or (w32-system-shell-p (w32-shell-name))
      (and (member (downcase (file-name-nondirectory (w32-shell-name)))
		   '("cmdproxy" "cmdproxy.exe"))
	   (w32-system-shell-p (getenv "COMSPEC")))))

(defvar w32-allow-system-shell nil
  "*Disable startup warning when using \"system\" shells.")

(defun w32-check-shell-configuration ()
  "Check the configuration of shell variables on Windows NT/9X.
This function is invoked after loading the init files and processing
the command line arguments.  It issues a warning if the user or site
has configured the shell with inappropriate settings."
  (interactive)
  (let ((prev-buffer (current-buffer))
	(buffer (get-buffer-create "*Shell Configuration*"))
	(system-shell))
    (set-buffer buffer)
    (erase-buffer)
    (if (w32-system-shell-p (getenv "ESHELL"))
	(insert (format "Warning! The ESHELL environment variable uses %s.
You probably want to change it so that it uses cmdproxy.exe instead.\n\n" 
			(getenv "ESHELL"))))
    (if (w32-system-shell-p (getenv "SHELL"))
	(insert (format "Warning! The SHELL environment variable uses %s.
You probably want to change it so that it uses cmdproxy.exe instead.\n\n" 
			(getenv "SHELL"))))
    (if (w32-system-shell-p shell-file-name)
	(insert (format "Warning! shell-file-name uses %s.
You probably want to change it so that it uses cmdproxy.exe instead.\n\n" 
			shell-file-name)))
    (if (and (boundp 'explicit-shell-file-name)
	     (w32-system-shell-p explicit-shell-file-name))
	(insert (format "Warning! explicit-shell-file-name uses %s.
You probably want to change it so that it uses cmdproxy.exe instead.\n\n"
			explicit-shell-file-name)))
    (setq system-shell (> (buffer-size) 0))

    ;; Allow user to specify that they really do want to use one of the
    ;; "system" shells, despite the drawbacks, but still warn if
    ;; shell-command-switch doesn't match.
    (if w32-allow-system-shell
	(erase-buffer))

    (cond (system-shell
	   ;; System shells.
	   (if (string-equal "-c" shell-command-switch)
	       (insert "Warning! shell-command-switch is \"-c\".
You should set this to \"/c\" when using a system shell.\n\n"))
	   (if w32-quote-process-args
	       (insert "Warning! w32-quote-process-args is t.
You should set this to nil when using a system shell.\n\n")))
	  ;; Non-system shells.
	  (t
	   (if (string-equal "/c" shell-command-switch)
	       (insert "Warning! shell-command-switch is \"/c\".
You should set this to \"-c\" when using a non-system shell.\n\n"))
	   (if (not w32-quote-process-args)
	       (insert "Warning! w32-quote-process-args is nil.
You should set this to t when using a non-system shell.\n\n"))))
    (if (> (buffer-size) 0)
	(display-buffer buffer)
      (kill-buffer buffer))
    (set-buffer prev-buffer)))

(add-hook 'after-init-hook 'w32-check-shell-configuration)

;;; Override setting chosen at startup.
(defun set-default-process-coding-system ()
  ;; Most programs on Windows will accept Unix line endings on input
  ;; (and some programs ported from Unix require it) but most will
  ;; produce DOS line endings on output.
  (setq default-process-coding-system
	(if default-enable-multibyte-characters
	    '(undecided-dos . undecided-unix)
	  '(raw-text-dos . raw-text-unix)))
  (or (w32-using-nt)
      ;; On Windows 9x, make cmdproxy default to using DOS line endings
      ;; for input, because command.com requires this.
      (setq process-coding-system-alist
	    `(("[cC][mM][dD][pP][rR][oO][xX][yY]"
	       . ,(if default-enable-multibyte-characters
		      '(undecided-dos . undecided-dos)
		    '(raw-text-dos . raw-text-dos)))))))

(add-hook 'before-init-hook 'set-default-process-coding-system)


;;; Basic support functions for managing Emacs' locale setting

(defvar w32-valid-locales nil
  "List of locale ids known to be supported.")

;;; This is the brute-force version; an efficient version is now
;;; built-in though.
(if (not (fboundp 'w32-get-valid-locale-ids))
    (defun w32-get-valid-locale-ids ()
      "Return list of all valid Windows locale ids."
      (let ((i 65535)
	    locales)
	(while (> i 0)
	  (if (w32-get-locale-info i)
	      (setq locales (cons i locales)))
	  (setq i (1- i)))
	locales)))

(defun w32-list-locales ()
  "List the name and id of all locales supported by Windows."
  (interactive)
  (if (null w32-valid-locales)
      (setq w32-valid-locales (w32-get-valid-locale-ids)))
  (switch-to-buffer-other-window (get-buffer-create "*Supported Locales*"))
  (erase-buffer)
  (insert "LCID\tAbbrev\tFull name\n\n")
  (insert (mapconcat
	   '(lambda (x)
	      (format "%d\t%s\t%s"
		      x
		      (w32-get-locale-info x)
		      (w32-get-locale-info x t)))
	   w32-valid-locales "\n"))
  (insert "\n")
  (goto-char (point-min)))


;;; Setup Info-default-directory-list to include the info directory
;;; near where Emacs executable was installed.  We used to set INFOPATH,
;;; but when this is set Info-default-directory-list is ignored.  We
;;; also cannot rely upon what is set in paths.el because they assume
;;; that configuration during build time is correct for runtime.
(defun w32-init-info ()
  (let* ((instdir (file-name-directory invocation-directory))
	 (dir1 (expand-file-name "../info/" instdir))
	 (dir2 (expand-file-name "../../../info/" instdir)))
    (if (file-exists-p dir1)
	(setq Info-default-directory-list 
	      (append Info-default-directory-list (list dir1)))
      (if (file-exists-p dir2)
	  (setq Info-default-directory-list
		(append Info-default-directory-list (list dir2)))))))

(add-hook 'before-init-hook 'w32-init-info)

;;; The variable source-directory is used to initialize Info-directory-list.
;;; However, the common case is that Emacs is being used from a binary
;;; distribution, and the value of source-directory is meaningless in that
;;; case.  Even worse, source-directory can refer to a directory on a drive
;;; on the build machine that happens to be a removable drive on the user's
;;; machine.  When this happens, Emacs tries to access the removable drive
;;; and produces the abort/retry/ignore dialog.  Since we do not use
;;; source-directory, set it to something that is a reasonable approximation
;;; on the user's machine.

(add-hook 'before-init-hook 
	  '(lambda ()
	     (setq source-directory (file-name-as-directory 
				     (expand-file-name ".." exec-directory)))))

;; Avoid creating auto-save file names containing invalid characters.
(fset 'original-make-auto-save-file-name
      (symbol-function 'make-auto-save-file-name))

(defun make-auto-save-file-name ()
  "Return file name to use for auto-saves of current buffer.
Does not consider `auto-save-visited-file-name' as that variable is checked
before calling this function.  You can redefine this for customization.
See also `auto-save-file-name-p'."
  (convert-standard-filename (original-make-auto-save-file-name)))

(defun convert-standard-filename (filename)
  "Convert a standard file's name to something suitable for the current OS.
This function's standard definition is trivial; it just returns the argument.
However, on some systems, the function is redefined
with a definition that really does change some file names."
  (let ((name (copy-sequence filename))
	(start 0))
    ;; leave ':' if part of drive specifier
    (if (eq (aref name 1) ?:)
	(setq start 2))
    ;; destructively replace invalid filename characters with !
    (while (string-match "[?*:<>|\"\000-\037]" name start)
      (aset name (match-beginning 0) ?!)
      (setq start (match-end 0)))
    ;; convert directory separators to Windows format
    ;; (but only if the shell in use requires it)
    (if (w32-shell-dos-semantics)
	(while (string-match "/" name start)
	  (aset name (match-beginning 0) ?\\)
	  (setq start (match-end 0))))
      name))

;;; Fix interface to (X-specific) mouse.el
(defun x-set-selection (type data)
  (or type (setq type 'PRIMARY))
  (put 'x-selections type data))

(defun x-get-selection (&optional type data-type)
  (or type (setq type 'PRIMARY))
  (get 'x-selections type))

(defun set-w32-system-coding-system (coding-system)
  "Set the coding system used by the Windows System to CODING-SYSTEM.
This is used for things like passing font names with non-ASCII
characters in them to the system. For a list of possible values of
CODING-SYSTEM, use \\[list-coding-systems]."
  (interactive
   (list (let ((default w32-system-coding-system))
           (read-coding-system
            (format "Coding system for system calls (default, %s): "
                    default)
            default))))
  (check-coding-system coding-system)
  (setq w32-system-coding-system coding-system))
;; Set system coding system initially to iso-latin-1
(set-w32-system-coding-system 'iso-latin-1)

;;; Set to a system sound if you want a fancy bell.
(set-message-beep nil)

;;; The "Windows" keys on newer keyboards bring up the Start menu
;;; whether you want it or not - make Emacs ignore these keystrokes
;;; rather than beep.
(global-set-key [lwindow] 'ignore)
(global-set-key [rwindow] 'ignore)

;; Map certain keypad keys into ASCII characters
;; that people usually expect.
(define-key function-key-map [tab] [?\t])
(define-key function-key-map [linefeed] [?\n])
(define-key function-key-map [clear] [11])
(define-key function-key-map [return] [13])
(define-key function-key-map [escape] [?\e])
(define-key function-key-map [M-tab] [?\M-\t])
(define-key function-key-map [M-linefeed] [?\M-\n])
(define-key function-key-map [M-clear] [?\M-\013])
(define-key function-key-map [M-return] [?\M-\015])
(define-key function-key-map [M-escape] [?\M-\e])

;; These don't do the right thing (voelker)
;(define-key function-key-map [backspace] [127])
;(define-key function-key-map [delete] [127])
;(define-key function-key-map [M-backspace] [?\M-\d])
;(define-key function-key-map [M-delete] [?\M-\d])

;; These tell read-char how to convert
;; these special chars to ASCII.
(put 'tab 'ascii-character ?\t)
(put 'linefeed 'ascii-character ?\n)
(put 'clear 'ascii-character 12)
(put 'return 'ascii-character 13)
(put 'escape 'ascii-character ?\e)
(put 'backspace 'ascii-character 127)
(put 'delete 'ascii-character 127)

;;; w32-fns.el ends here