view lib-src/Makefile.in @ 1772:86f58433c8aa

* scrollbar.el: New file. * term/x-win.el: Require 'scrollbar.

# DIST: This is the distribution Makefile for Emacs.  configure can
# DIST: make most of the changes to this file you might want, so try
# DIST: that first.

# add -DUSG for SysV movemail and timer
# For Xenix, add the following for movemail:
#  LOADLIBES= -lx
# For Mips, the following is needed for who knows what.
#  LOADLIBES = -lmld /usr/bsd43/usr/lib/libc.a

# Avoid trouble on systems where the `SHELL' variable might be
# inherited from the environment.
SHELL = /bin/sh

# ==================== Things `configure' might edit ====================

CC=cc
CONFIG_CFLAGS=-g
LOADLIBES=
version=version-not-set
configname=configuration-name-not-set

# ==================== Where To Install Things ====================

# The default location for installation.  Everything is placed in
# subdirectories of this directory.  The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them.
prefix=/usr/local

# Like `prefix', but used for architecture-specific files.
exec_prefix=${prefix}

# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
bindir=${exec_prefix}/bin

# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data.  ${archlibdir} is usually below this.
libdir=${exec_prefix}/lib

# Where to find the source code - setting this to anything but
# . doesn't work yet.  The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src.  This is
# set by the configure script's `--srcdir' option.
srcdir=.

# ==================== Emacs-specific directories ====================

# These variables hold the values Emacs will actually use.  They are
# based on the values of the standard Make variables above.

# Where to put executables to be run by Emacs rather than the user.
# This path usually includes the Emacs version and configuration name,
# so that multiple configurations for multiple versions of Emacs may
# be installed at once.
archlibdir=${libdir}/emacs/${version}/${configname}

# ==================== Utility Programs for the Build ====================

# Allow the user to specify the install program.
INSTALL = install
INSTALLFLAGS = -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL}

# ============================= Targets ==============================

# Things that a user might actually run, which should be installed in bindir.
INSTALLABLES = etags ctags emacsclient b2m 

# Things that Emacs runs internally, or during the build process,
# which should not be installed in bindir.
UTILITIES= test-distrib make-path wakeup make-docfile digest-doc sorted-doc \
	movemail cvtmail fakemail yow env emacsserver hexl timer

# Like UTILITIES, but they're not system-dependent, and should not be
# deleted by the distclean target.
SCRIPTS= rcs2log vcdiff

EXECUTABLES= ${UTILITIES} ${INSTALLABLES} ${SCRIPTS}

### We need to #define emacs to get the right versions of some files.
### Some other files - those shared with other GNU utilities - need
### HAVE_CONFIG_H #defined before they know they can take advantage of
### the information in ../src/config.h.
CFLAGS=${CONFIG_CFLAGS} -Demacs -DHAVE_CONFIG_H -I../src

all: ${EXECUTABLES}

### Install the internal utilities.  Until they are installed, we can
### just run them directly from lib-src.
${archlibdir}: all
	@echo
	@echo "Installing utilities run internally by Emacs."
	./make-path ${archlibdir}
	if [ `(cd ${archlibdir};/bin/pwd)` != `/bin/pwd` ]; then \
	  for file in ${EXECUTABLES} ; do \
	    cp $${file} ${archlibdir} ; \
	    chmod 755 ${archlibdir}/$${file} ; \
	  done ; \
        fi
	@echo
	@echo "Changing the owner and group of Emacs's utility programs to \`bin'."
	@echo "(You may ignore errors here if you don't care about this.)"
	-for file in ${EXECUTABLES} ; do \
	  chgrp bin ${archlibdir}/$${file} ; \
	  chown bin ${archlibdir}/$${file} ; \
	done

# We don't need to install `wakeup' explicitly, because it will be copied when
# this whole directory is copied.
install: ${archlibdir}
	@echo
	@echo "Installing utilities for users to run."
	for file in emacsclient etags ctags b2m ; do \
	  cp $${file} ${bindir}/$${file}.new ; \
	  chmod 755 ${bindir}/$${file}.new ; \
        done
	@echo
	@echo "Changing the owner and group of utility programs to \`bin'."
	@echo "(You may ignore errors here if you don't care about this.)"
	-for file in emacsclient etags ctags b2m ; do \
	  chgrp bin ${bindir}/$${file}.new ; \
	  chown bin ${bindir}/$${file}.new ; \
	  mv ${bindir}/$${file}.new ${bindir}/$${file} ; \
        done

clean mostlyclean:
	-rm -f ${INSTALLABLES} ${UTILITIES} core *.o

distclean:
	-rm -f ${INSTALLABLES} ${UTILITIES} ../etc/DOC* core *.o

realclean: distclean
	-rm TAGS aixcc.c

extraclean: realclean
	-rm -f *~ \#*

# Test the contents of the directory.
check:
	@echo "We don't have any tests for GNU Emacs yet."

TAGS: etags
	etags *.[ch]

# This verifies that the non-ASCII characters in the file `testfile'
# have not been clobbered by whatever means were used to copy and
# distribute Emacs.  If they were clobbered, all the .elc files were
# clobbered too.
test-distrib: test-distrib.c
	$(CC) -o test-distrib test-distrib.c
	./test-distrib

GETOPTOBJS = getopt.o getopt1.o
GETOPTDEPS = $(GETOPTOBJS) getopt.h
getopt.o: getopt.c getopt.h
getopt1.o: getopt1.c getopt.h

etags: etags.c $(GETOPTDEPS)
	$(CC) ${CFLAGS} -DETAGS etags.c $(GETOPTOBJS) $(LOADLIBES) -o etags

ctags: etags.c $(GETOPTDEPS)
	$(CC) ${CFLAGS} -DCTAGS etags.c $(GETOPTOBJS) $(LOADLIBES) -o ctags

wakeup: wakeup.c
	$(CC) ${CFLAGS} wakeup.c $(LOADLIBES) -o wakeup

make-docfile: make-docfile.c
	$(CC) ${CFLAGS} make-docfile.c $(LOADLIBES) -o make-docfile

digest-doc: digest-doc.c
	$(CC) ${CFLAGS} digest-doc.c $(LOADLIBES) -o digest-doc 

sorted-doc: sorted-doc.c
	$(CC) ${CFLAGS} sorted-doc.c $(LOADLIBES) -o sorted-doc

b2m: b2m.c ../src/config.h
	$(CC) ${CFLAGS} b2m.c $(LOADLIBES) -o b2m 

movemail: movemail.c ../src/config.h
	$(CC) ${CFLAGS} movemail.c $(LOADLIBES) -o movemail

cvtmail: cvtmail.c
	$(CC) ${CFLAGS} cvtmail.c $(LOADLIBES) -o cvtmail

fakemail: fakemail.c ../src/config.h
	$(CC) ${CFLAGS} fakemail.c $(LOADLIBES) -o fakemail

yow: yow.c ../src/paths.h
	$(CC) ${CFLAGS} yow.c $(LOADLIBES) -o yow

env: env.c ../src/config.h
	$(CC) -DEMACS ${CFLAGS} env.c $(LOADLIBES) -o env

emacsserver: emacsserver.c ../src/config.h
	$(CC) ${CFLAGS} emacsserver.c $(LOADLIBES) -o emacsserver

emacsclient: emacsclient.c ../src/config.h
	$(CC) ${CFLAGS} emacsclient.c $(LOADLIBES) -o emacsclient

hexl: hexl.c
	$(CC) ${CFLAGS} hexl.c $(LOADLIBES) -o hexl

getdate.o: getdate.y ../src/config.h
	${YACC} ${YFLAGS} getdate.y
	$(CC) $(CFLAGS) -c y.tab.c
	mv y.tab.o getdate.o
timer: getdate.o timer.o
	$(CC) $(CFLAGS) getdate.o timer.o -o timer

make-path: make-path.c
	$(CC) $(CFLAGS) make-path.c -o make-path

# These are NOT included in INSTALLABLES or UTILITIES.
# See ../src/ymakefile.
emacstool: emacstool.c
	$(CC) emacstool.c -o emacstool ${CFLAGS} \
	  -lsuntool -lsunwindow -lpixrect $(LOADLIBES)

# For SUN Japanese Language Environment
nemacstool: emacstool.c
	$(CC) -o nemacstool -DJLE ${CFLAGS} emacstool.c \
	  -lsuntool -lmle -lsunwindow -lpixrect $(LOADLIBES)

xvetool: emacstool.c
	$(CC) -o xvetool -DXVIEW ${CFLAGS} emacstool.c \
	  -lxview -lX -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \
	  $(LOADLIBES)

xveterm: emacstool.c
	$(CC) -o xveterm -DXVIEW -DTTERM ${CFLAGS} emacstool.c \
	  -lxview -lolgx -lX  -I$(OPENWINHOME)/include -L$(OPENWINHOME)/lib \
	  $(LOADLIBES)

aixcc: aixcc.c
	$(CC) $(CFLAGS) -o aixcc aixcc.c

aixcc.c: aixcc.lex
	lex aixcc.lex
	mv lex.yy.c aixcc.c