#!/bin/sh#### make-dist: create an Emacs distribution tar file from the current#### source tree. This basically creates a duplicate directory#### structure, and then hard links into it only those files that should#### be distributed. This means that if you add a file with an odd name,#### you should make sure that this script will include it.# Copyright (C) 1995 Free Software Foundation, Inc.## This file is part of GNU Emacs.## GNU Emacs is free software; you can redistribute it and/or modify# it under the terms of the GNU General Public License as published by# the Free Software Foundation; either version 2, or (at your option)# any later version.## GNU Emacs is distributed in the hope that it will be useful,# but WITHOUT ANY WARRANTY; without even the implied warranty of# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the# GNU General Public License for more details.## You should have received a copy of the GNU General Public License# along with GNU Emacs; see the file COPYING. If not, write to# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.progname="$0"### Exit if a command fails.### set -e### Print out each line we read, for debugging's sake.### set -vclean_up=yesmake_tar=yesnewer=""while [ $# -gt 0 ]; do case "$1" in ## This option tells make-dist not to delete the staging directory ## after it's done making the tar file. "--no-clean-up" ) clean_up=no ;; ## This option tells make-dist not to make a tar file. Since it's ## rather pointless to build the whole staging directory and then ## nuke it, using this option also selects '--no-clean-up'. "--no-tar" ) make_tar=no clean_up=no ;; ## This option tells make-dist to make the distribution normally, then ## remove all files older than the given timestamp file. This is useful ## for creating incremental or patch distributions. "--newer") newer="$2" new_extension=".new" shift ;; ## This option tells make-dist to use `compress' instead of gzip. ## Normally, make-dist uses gzip whenever it is present. "--compress") default_gzip="compress" ;; * ) echo "${progname}: Unrecognized argument: $1" >&2 exit 1 ;; esac shiftdone### Make sure we're running in the right place.if [ ! -d src -o ! -f src/lisp.h -o ! -d lisp -o ! -f lisp/version.el ]; then echo "${progname}: Can't find \`src/lisp.h' and \`lisp/version.el'." >&2 echo "${progname} must be run in the top directory of the Emacs" >&2 echo "distribution tree. cd to that directory and try again." >&2 exit 1fi### Find out which version of Emacs this is.shortversion=`grep 'defconst[ ]*emacs-version' lisp/version.el \ | sed -e 's/^.*"\([0-9][0-9]*\.[0-9][0-9]*\).*$/\1/'`version=`grep 'defconst[ ]*emacs-version' lisp/version.el \ | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'`if [ ! "${version}" ]; then echo "${progname}: can't find current Emacs version in \`./lisp/version.el'." >&2 exit 1fiecho $version and $shortversionif grep -s "GNU Emacs version ${shortversion}" ./man/emacs.texi > /dev/null; then trueelse echo "You must update the version number in \`./man/emacs.texi'" sleep 5fi### Make sure we don't already have a directory emacs-${version}.emacsname="emacs-${version}${new_extension}"if [ -d ${emacsname} ]then echo Directory "${emacsname}" already exists >&2 exit 1fi### Make sure the subdirectory is available.tempparent="make-dist.tmp.$$"if [ -d ${tempparent} ]; then echo "${progname}: staging directory \`${tempparent}' already exists.Perhaps a previous invocation of \`${progname}' failed to clean up afteritself. Check that directories whose names are of the form\`make-dist.tmp.NNNNN' don't contain any important information, removethem, and try again." >&2 exit 1fi### Check for .elc files with no corresponding .el file.ls -1 lisp/*.el | sed 's/\.el$/.elc/' > /tmp/ells -1 lisp/*.elc > /tmp/elcbogosities="`comm -13 /tmp/el /tmp/elc`"if [ "${bogosities}" != "" ]; then echo "The following .elc files have no corresponding .el files:" echo "${bogosities}"firm -f /tmp/el /tmp/elc### Make sure configure is newer than configure.in.if [ "x`ls -t configure configure.in | head -1`" != "xconfigure" ]; then echo "\`./configure.in' seems to be newer than \`./configure.'" >&2 echo "Attempting to run autoconf." >&2 autoconffi### Update getdate.c.(cd lib-src; make -f Makefile getdate.c YACC="bison -y")echo "Updating Info files."(cd man; make info)echo "Updating finder-inf.el."### update finder-inf.el.(cd lisp; ../src/emacs -batch -l finder -f finder-compile-keywords)(cd lisp; ../src/emacs -batch -f batch-byte-compile finder-inf.el)echo "Creating staging directory: \`${tempparent}'"mkdir ${tempparent}tempdir="${tempparent}/${emacsname}"### This trap ensures that the staging directory will be cleaned up even### when the script is interrupted in mid-career.if [ "${clean_up}" = yes ]; then trap "echo 'Interrupted...cleaning up the staging directory.'; rm -rf ${tempparent}; exit 1" 1 2 15fiecho "Creating top directory: \`${tempdir}'"mkdir ${tempdir}### We copy in the top-level files before creating the subdirectories in### hopes that this will make the top-level files appear first in the### tar file; this means that people can start reading the INSTALL and### README while the rest of the tar file is still unpacking. Whoopee.echo "Making links to top-level files." ln GETTING.GNU.SOFTWARE INSTALL PROBLEMS README BUGS move-if-change ${tempdir}ln ChangeLog Makefile.in configure configure.in ${tempdir}ln config.bat make-dist update-subdirs vpath.sed ${tempdir}### Copy these files; they're cross-filesystem symlinks.cp mkinstalldirs ${tempdir}cp config.sub ${tempdir}cp config.guess ${tempdir}cp install.sh ${tempdir}echo "Updating version number in README."(cd ${tempdir} awk \ '$1 " " $2 " " $3 " " $4 " " $5 == "This directory tree holds version" { $6 = version; print $0 } $1 " " $2 " " $3 " " $4 " " $5 != "This directory tree holds version"' \ version=${version} README > tmp.README mv tmp.README README)echo "Creating subdirectories."for subdir in lisp lisp/term site-lisp \ src src/m src/s src/bitmaps lib-src oldXMenu lwlib \ nt nt/inc nt/inc/sys \ etc etc/e lock cpp info man msdos vms; do mkdir ${tempdir}/${subdir}doneecho "Making links to \`lisp'."### Don't distribute TAGS, =*.el files, site-init.el, site-load.el, or default.el.(cd lisp ln [a-zA-Z]*.el ../${tempdir}/lisp ln [a-zA-Z]*.elc ../${tempdir}/lisp ln [a-zA-Z]*.dat ../${tempdir}/lisp ## simula.el doesn't keep abbreviations in simula.defns any more. ## ln [a-zA-Z]*.defns ../${tempdir}/lisp ln ChangeLog Makefile makefile.nt ChangeLog.? README dired.todo ../${tempdir}/lisp cd ../${tempdir}/lisp rm -f TAGS =* rm -f site-init site-init.el site-init.elc rm -f site-load site-load.el site-load.elc rm -f default default.el default.elc)#echo "Making links to \`lisp/calc-2.02'."#### Don't distribute =*.el files, TAGS or backups.#(cd lisp/calc-2.02# ln [a-zA-Z]*.el ../../${tempdir}/lisp/calc-2.02# ln [a-zA-Z]*.elc ../../${tempdir}/lisp/calc-2.02# ln calc.info* calc.texinfo calc-refcard.* ../../${tempdir}/lisp/calc-2.02# ln INSTALL Makefile README README.prev ../../${tempdir}/lisp/calc-2.02# cd ../../${tempdir}/lisp/calc-2.02# rm -f *~ TAGS)echo "Making links to \`lisp/term'."### Don't distribute =*.el files or TAGS.(cd lisp/term ln [a-zA-Z]*.el ../../${tempdir}/lisp/term ln [a-zA-Z]*.elc ../../${tempdir}/lisp/term ln README ../../${tempdir}/lisp/term rm -f =* TAGS)echo "Making links to \`src'."### Don't distribute =*.[ch] files, or the configured versions of### config.h.in, paths.h.in, or Makefile.in.in, or TAGS.(cd src echo " (If we can't link gmalloc.c, that's okay.)" ln [a-zA-Z]*.c ../${tempdir}/src ## Might be a symlink to a file on another filesystem. test -f ../${tempdir}/src/gmalloc.c || cp gmalloc.c ../${tempdir}/src ln [a-zA-Z]*.h ../${tempdir}/src ln [a-zA-Z]*.s ../${tempdir}/src ln README Makefile.in.in ChangeLog ChangeLog.? config.h.in paths.h.in \ ../${tempdir}/src ln makefile.nt ../${tempdir}/src ln .gdbinit .dbxinit ../${tempdir}/src ln *.opt vms-pp.trans ../${tempdir}/src cd ../${tempdir}/src rm -f config.h paths.h Makefile rm -f =* TAGS)echo "Making links to \`src/bitmaps'."(cd src/bitmaps ln README *.xbm ../../${tempdir}/src/bitmaps)echo "Making links to \`src/m'."(cd src/m # We call files for miscellaneous input (to linker etc) .inp. ln README [a-zA-Z0-9]*.h *.inp ../../${tempdir}/src/m)echo "Making links to \`src/s'."(cd src/s ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/s)echo "Making links to \`lib-src'."(cd lib-src ln [a-zA-Z]*.[chy] ../${tempdir}/lib-src ln ChangeLog Makefile.in.in README testfile vcdiff ../${tempdir}/lib-src ln emacs.csh rcs2log rcs-checkin makefile.nt ../${tempdir}/lib-src cd ../${tempdir}/lib-src rm -f getdate.tab.c y.tab.c y.tab.h rm -f =* TAGS)echo "Making links to \`nt'."(cd nt ln emacs.ico emacs.rc config.nt config.w95 [a-z]*.in [a-z]*.c ../${tempdir}/nt ln [a-z]*.bat [a-z]*.h makefile.def makefile.nt ../${tempdir}/nt ln todo ChangeLog install readme ../${tempdir}/nt)echo "Making links to \`nt/inc'."(cd nt/inc ln [a-z]*.h ../../${tempdir}/nt/inc)echo "Making links to \`nt/inc/sys'."(cd nt/inc/sys ln [a-z]*.h ../../../${tempdir}/nt/inc/sys)echo "Making links to \`msdos'."(cd msdos ln ChangeLog emacs.ico emacs.pif ../${tempdir}/msdos ln mainmake sed*.inp ../${tempdir}/msdos cd ../${tempdir}/msdos rm -f =*)echo "Making links to \`oldXMenu'."(cd oldXMenu ln *.c *.h *.in ../${tempdir}/oldXMenu ln README Imakefile ChangeLog ../${tempdir}/oldXMenu ln compile.com descrip.mms ../${tempdir}/oldXMenu)echo "Making links to \`lwlib'."(cd lwlib ln *.c *.h *.in ../${tempdir}/lwlib ln README Imakefile ChangeLog ../${tempdir}/lwlib)echo "Making links to \`etc'."### Don't distribute = files, TAGS, DOC files, backups, autosaves, or### tex litter.(cd etc ln `ls -d * | grep -v 'RCS' | grep -v 'Old' | grep -v '^e$'` ../${tempdir}/etc cd ../${tempdir}/etc rm -f DOC* *~ \#*\# *.dvi *.log *,v =* core rm -f TAGS)echo "Making links to \`etc/e'."(cd etc/e ln `ls -d * | grep -v 'RCS'` ../../${tempdir}/etc/e cd ../../${tempdir}/etc rm -f *~ \#*\# *,v =* core)echo "Making links to \`cpp'."(cd cpp ln cccp.c cexp.y Makefile README ../${tempdir}/cpp)echo "Making links to \`info'."# Don't distribute backups or autosaves.(cd info ln [a-zA-Z]* ../${tempdir}/info cd ../${tempdir}/info # Avoid an error when expanding the wildcards later. ln emacs dummy~ ; ln emacs \#dummy\# rm -f *~ \#*\# core)echo "Making links to \`man'."(cd man ln *.texi *.aux *.cps *.fns *.kys *.vrs ../${tempdir}/man test -f README && ln README ../${tempdir}/man test -f Makefile.in && ln Makefile.in ../${tempdir}/man ln ChangeLog split-man ../${tempdir}/man cp texinfo.tex ../${tempdir}/man cd ../${tempdir}/man rm -f \#*\# =* *~ core emacs-index* *.Z *.z xmail rm -f emacs.?? termcap.?? gdb.?? *.log *.toc *.dvi *.oaux)echo "Making links to \`vms'."(cd vms ln [0-9a-zA-Z]* ../${tempdir}/vms cd ../${tempdir}/vms rm -f *~)### It would be nice if they could all be symlinks to etc's copy, but### you're not supposed to have any symlinks in distribution tar files.echo "Making sure copying notices are all copies of \`etc/COPYING'."rm -f ${tempdir}/etc/COPYINGcp etc/COPYING ${tempdir}/etc/COPYINGfor subdir in lisp src lib-src info msdos; do if [ -f ${tempdir}/${subdir}/COPYING ]; then rm ${tempdir}/${subdir}/COPYING fi cp etc/COPYING ${tempdir}/${subdir}done#### Make sure that there aren't any hard links between files in the#### distribution; people with afs can't deal with that. Okay,#### actually we just re-copy anything with a link count greater#### than two. (Yes, strictly greater than 2 is correct; since we#### created these files by linking them in from the original tree,#### they'll have exactly two links normally.)#echo "Breaking intra-tree links."#find ${tempdir} ! -type d -links +2 \# -exec cp -p {} $$ \; -exec rm -f {} \; -exec mv $$ {} \;if [ "${newer}" ]; then echo "Removing files older than $newer." ## We remove .elc files unconditionally, on the theory that anyone picking ## up an incremental distribution already has a running Emacs to byte-compile ## them with. find ${tempparent} \( -name '*.elc' -o ! -newer ${newer} \) -exec rm -f {} \;fiif [ "${make_tar}" = yes ]; then if [ "${default_gzip}" = "" ]; then echo "Looking for gzip." temppath=`echo $PATH | sed 's/^:/.:/ s/::/:.:/g s/:$/:./ s/:/ /g'` default_gzip=`( for dir in ${temppath}; do if [ -f ${dir}/gzip ]; then echo 'gzip --best'; exit 0; fi done echo compress )` fi case "${default_gzip}" in compress* ) gzip_extension=.Z ;; * ) gzip_extension=.gz ;; esac echo "Creating tar file." (cd ${tempparent} ; tar cvf - ${emacsname} ) \ | ${default_gzip} \ > ${emacsname}.tar${gzip_extension}fiif [ "${clean_up}" = yes ]; then echo "Cleaning up the staging directory." rm -rf ${tempparent}else (cd ${tempparent}; mv ${emacsname} ..) rm -rf ${tempparent}fi### make-dist ends here