Mercurial > emacs
view lisp/makefile.w32-in @ 78795:968a3bca1d34
(blink-matching-open): Don't display message when no
paren is found within blink-matching-paren-distance characters.
Don't search prompt in blink-matching-paren-distance nil case.
author | Martin Rudalics <rudalics@gmx.at> |
---|---|
date | Sat, 15 Sep 2007 09:33:37 +0000 |
parents | 9355f9b7bbff |
children | 73661ddc7ac7 b98604865ea0 |
line wrap: on
line source
# -*- Makefile -*- for GNU Emacs on the Microsoft W32 API. # Copyright (C) 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007 Free Software Foundation, Inc. # # This file is part of GNU Emacs. # # GNU Emacs is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Emacs; see the file COPYING. If not, write to the # Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, # Boston, MA 02110-1301, USA. # ALL = all: $(ALL) SQUOTE=' # ' lisp = $(CURDIR) srcdir = $(CURDIR)/.. # You can specify a different executable on the make command line, # e.g. "make EMACS=../src/emacs ...". EMACS = $(THISDIR)/../bin/emacs.exe # Command line flags for Emacs. This must include --multibyte, # otherwise some files will not compile. EMACSOPT = -batch --no-init-file --no-site-file --multibyte # Set EMACSLOADPATH correctly (already defined in environment). EMACSLOADPATH=$(lisp) lisptagsfiles1 = $(lisp)/*.el lisptagsfiles2 = $(lisp)/*/*.el ETAGS = "../lib-src/$(BLD)/etags" # Files to compile before others during a bootstrap. This is done to # speed up the bootstrap process. The CC files are compiled first # because CC mode tweaks the compilation process, and requiring # cc-mode when it is not compiled doesn't work during the # bootstrapping. COMPILE_FIRST = \ $(lisp)/emacs-lisp/byte-opt.el \ $(lisp)/emacs-lisp/bytecomp.el \ $(lisp)/subr.el \ $(lisp)/progmodes/cc-mode.el \ $(lisp)/progmodes/cc-vars.el # The actual Emacs command run in the targets below. # The quotes around $(EMACS) are here because the user could type # it with forward slashes and without quotes, which will fail if # the shell is cmd.exe. emacs = "$(EMACS)" $(EMACSOPT) # Have to define the list of subdirs manually when not using sh. WINS_ALMOST=\ calc \ calendar \ emacs-lisp \ emulation \ erc \ eshell \ gnus \ international \ language \ mail \ mh-e \ net \ play \ progmodes \ term \ textmodes \ url WINS= $(WINS_ALMOST) \ obsolete doit: $(lisp)/cus-load.el: touch $@ # WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as # this can break with GNU Make 3.81 and later if sh.exe is used. custom-deps: $(lisp)/cus-load.el $(lisp)/loaddefs.el doit @echo Directories: $(WINS) -$(emacs) -l cus-dep --eval $(ARGQUOTE)(setq find-file-hook nil)$(ARGQUOTE) -f custom-make-dependencies $(lisp) $(WINS) finder-data: $(lisp)/loaddefs.el doit @echo Directories: $(WINS) $(emacs) -l finder -f finder-compile-keywords-make-dist $(lisp) $(WINS) $(lisp)/loaddefs.el: $(MAKE) $(MFLAGS) loaddefs.el-$(SHELLTYPE) cp loaddefs.el-$(SHELLTYPE) $@ rm loaddefs.el-$(SHELLTYPE) loaddefs.el-SH: echo ";;; loaddefs.el --- automatically extracted autoloads" > $@ echo ";;" >> $@; echo ";;; Code:" >> $@ echo "(autoload 'define-minor-mode \"easy-mmode\")" >>$@ echo "(autoload 'define-ccl-program \"ccl\")" >>$@ echo "(autoload 'regexp-opt \"regexp-opt\")" >>$@ echo "(autoload 'string-to-list \"mule-util\")" >>$@ echo "(autoload 'define-derived-mode \"derived\")" >>$@ echo "(autoload 'encoded-kbd-mode \"encoded-kb\")" >>$@ echo "(defvar cvs-global-menu nil)" >>$@ echo "" >> $@ echo ";;; Local Variables:" >> $@ echo ";;; version-control: never" >> $@ echo ";;; no-byte-compile: t" >> $@ echo ";;; no-update-autoloads: t" >> $@ echo ";;; End:" >> $@ echo ";;; loaddefs.el ends here" >> $@ loaddefs.el-CMD: echo ;;; loaddefs.el --- automatically extracted autoloads> $@ echo ;;; Code:>> $@ echo (autoload 'define-minor-mode "easy-mmode")>> $@ echo (autoload 'define-ccl-program "ccl")>> $@ echo (autoload 'regexp-opt "regexp-opt")>> $@ echo (autoload 'string-to-list "mule-util")>> $@ echo (autoload 'define-derived-mode "derived")>> $@ echo (autoload 'encoded-kbd-mode "encoded-kb")>> $@ echo (defvar cvs-global-menu nil)>> $@ echo.>> $@ echo ;;; Local Variables:>> $@ echo ;;; version-control: never>> $@ echo ;;; no-byte-compile: t>> $@ echo ;;; no-update-autoloads: t>> $@ echo ;;; End:>> $@ echo ;;; loaddefs.el ends here>> $@ # Use . instead of $(lisp) because $(lisp) is an absolute file name, # including a drive letter and any leading directories, so the generated # loaddefs.el will mention file names that on other machine reference # possibly non-existent directories. # # WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as # this can break with GNU Make 3.81 and later if sh.exe is used. autoloads: $(lisp)/loaddefs.el doit @echo Directories: . $(WINS_ALMOST) $(emacs) -l autoload \ --eval $(ARGQUOTE)(setq find-file-hook nil find-file-suppress-same-file-warnings t)$(ARGQUOTE) \ -f w32-batch-update-autoloads "$(lisp)/loaddefs.el" . $(WINS_ALMOST) $(lisp)/subdirs.el: $(MAKE) $(MFLAGS) update-subdirs # Need separate version for sh and native cmd.exe update-subdirs: update-subdirs-$(SHELLTYPE) update-subdirs-CMD: doit echo ;; -*- no-byte-compile: t -*-> $(lisp)/subdirs.el echo ;; In load-path, after this directory should come>> $(lisp)/subdirs.el echo ;; certain of its subdirectories. Here we specify them.>> $(lisp)/subdirs.el echo (normal-top-level-add-to-load-path $(SQUOTE)(>> $(lisp)/subdirs.el @for %%d in ($(WINS)) do if not (%%d)==(term) echo "%%d">> $(lisp)/subdirs.el echo ))>> $(lisp)/subdirs.el update-subdirs-SH: doit $(srcdir)/update-subdirs $(lisp); \ for file in $(WINS); do \ $(srcdir)/update-subdirs $$file; \ done; updates: update-subdirs autoloads mh-autoloads finder-data custom-deps # This is useful after "cvs up". cvs-update: recompile autoloads finder-data custom-deps # Update the AUTHORS file. update-authors: $(emacs) -l authors -f batch-update-authors $(srcdir)/AUTHORS $(srcdir) TAGS: $(lisptagsfiles1) $(lisptagsfiles2) $(ETAGS) $(lisptagsfiles1) $(lisptagsfiles2) TAGS-LISP: $(lisptagsfiles1) $(lisptagsfiles2) $(ETAGS) -o TAGS-LISP $(lisptagsfiles1) $(lisptagsfiles2) .SUFFIXES: .elc .el .el.elc: -$(emacs) -f batch-byte-compile $< # Compile all Lisp files, but don't recompile those that are up to # date. Some files don't actually get compiled because they set the # local variable no-byte-compile. # All .elc files are made writable before compilation in case we # checked out read-only (CVS option -r). Files MUST be compiled one by # one. If we compile several files in a row we can't make sure that # the compilation environment is clean. We also set the load-path of # the Emacs used for compilation to the current directory and its # subdirectories, to make sure require's and load's in the files being # compiled find the right files. # Need separate version for sh and native cmd.exe compile: $(lisp)/subdirs.el mh-autoloads compile-$(SHELLTYPE) doit compile-CMD: # -for %%f in ($(lisp) $(WINS)) do for %%g in (%%f\*.elc) do @attrib -r %%g for %%f in ($(COMPILE_FIRST)) do \ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done %%f for %%f in (. $(WINS)) do for %%g in (%%f/*.el) do \ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done %%f/%%g compile-SH: # for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done for el in $(COMPILE_FIRST); do \ echo Compiling $$el; \ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done $$el; \ done for dir in $(lisp) $(WINS); do \ for el in $$dir/*.el; do \ if test -f $$el; \ then \ echo Compiling $$el; \ $(emacs) -l loaddefs -f batch-byte-compile-if-not-done $$el; \ fi \ done; \ done # Compile all Lisp files. This is like `compile' but compiles files # unconditionally. Some files don't actually get compiled because they # set the local variable no-byte-compile. compile-always: $(lisp)/subdirs.el compile-always-$(SHELLTYPE) doit compile-always-CMD: # -for %%f in ($(lisp) $(WINS)) do for %%g in (%%f\*.elc) do @attrib -r %%g for %%f in ($(COMPILE_FIRST)) do $(emacs) -f batch-byte-compile %%f for %%f in (. $(WINS)) do for %%g in (%%f/*.el) do $(emacs) -f batch-byte-compile %%f/%%g compile-always-SH: # for elc in $(lisp)/*.elc $(lisp)/*/*.elc; do attrib -r $$elc; done for el in $(COMPILE_FIRST); do \ echo Compiling $$el; \ $(emacs) -f batch-byte-compile $$el || exit 1; \ done for dir in $(lisp) $(WINS); do \ for el in $$dir/*.el; do \ echo Compiling $$el; \ $(emacs) -f batch-byte-compile $$el || exit 1; \ done; \ done compile-calc: compile-calc-$(SHELLTYPE) compile-calc-CMD: for %%f in ($(lisp)/calc/*.el) do $(emacs) -f batch-byte-compile %%f compile-calc-SH: for el in $(lisp)/calc/*.el; do \ echo Compiling $$el; \ $(emacs) -f batch-byte-compile $$el || exit 1; \ done # Backup compiled Lisp files in elc.tar.gz. If that file already # exists, make a backup of it. backup-compiled-files: -mv $(lisp)/elc.tar.gz $(lisp)/elc.tar.gz~ -tar czf $(lisp)/elc.tar.gz $(lisp)/*.elc $(lisp)/*/*.elc # Compile Lisp files, but save old compiled files first. compile-after-backup: backup-compiled-files compile-always # Recompile all Lisp files which are newer than their .elc files. # Note that this doesn't create .elc files. It only recompiles if an # .elc is present. # WARNING: Do NOT split the part inside $(ARGQUOTE)s into multiple lines as # this can break with GNU Make 3.81 and later if sh.exe is used. recompile: mh-autoloads doit $(lisp)/progmodes/cc-mode.elc $(emacs) --eval $(ARGQUOTE)(batch-byte-recompile-directory 0)$(ARGQUOTE) $(lisp) # Update MH-E internal autoloads. These are not to be confused with # the autoloads for the MH-E entry points, which are already in # loaddefs.el. MH_E_SRC = $(lisp)/mh-e/mh-acros.el $(lisp)/mh-e/mh-alias.el \ $(lisp)/mh-e/mh-buffers.el $(lisp)/mh-e/mh-compat.el \ $(lisp)/mh-e/mh-comp.el $(lisp)/mh-e/mh-e.el \ $(lisp)/mh-e/mh-folder.el $(lisp)/mh-e/mh-funcs.el \ $(lisp)/mh-e/mh-gnus.el $(lisp)/mh-e/mh-identity.el \ $(lisp)/mh-e/mh-inc.el $(lisp)/mh-e/mh-junk.el \ $(lisp)/mh-e/mh-letter.el $(lisp)/mh-e/mh-limit.el \ $(lisp)/mh-e/mh-mime.el $(lisp)/mh-e/mh-print.el \ $(lisp)/mh-e/mh-scan.el $(lisp)/mh-e/mh-search.el \ $(lisp)/mh-e/mh-seq.el $(lisp)/mh-e/mh-show.el \ $(lisp)/mh-e/mh-speed.el $(lisp)/mh-e/mh-thread.el \ $(lisp)/mh-e/mh-tool-bar.el $(lisp)/mh-e/mh-utils.el \ $(lisp)/mh-e/mh-xface.el # See the commentary for autoloads above for why we use ./mh-e below # instead of $(lisp)/mh-e. mh-autoloads: $(lisp)/mh-e/mh-loaddefs.el $(lisp)/mh-e/mh-loaddefs.el: $(MH_E_SRC) $(MAKE) $(MFLAGS) pre-mh-loaddefs.el-$(SHELLTYPE) cp pre-mh-loaddefs.el-$(SHELLTYPE) $@ rm pre-mh-loaddefs.el-$(SHELLTYPE) "$(EMACS)" $(EMACSOPT) \ -l autoload \ --eval "(setq generate-autoload-cookie \";;;###mh-autoload\")" \ --eval "(setq find-file-suppress-same-file-warnings t)" \ --eval "(setq make-backup-files nil)" \ -f w32-batch-update-autoloads \ "$(lisp)/mh-e/mh-loaddefs.el" ./mh-e pre-mh-loaddefs.el-SH: echo ";;; mh-loaddefs.el --- automatically extracted autoloads" > $@ echo ";;" >> $@ echo ";; Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc." >> $@ echo ";; Author: Bill Wohler <wohler@newt.com>" >> $@ echo ";; Keywords: mail" >> $@ echo ";;; Commentary:" >> $@ echo ";;; Change Log:" >> $@ echo ";;; Code:" >> $@ echo "" >> $@ echo "(provide 'mh-loaddefs)" >> $@ echo ";; Local Variables:" >> $@ echo ";; version-control: never" >> $@ echo ";; no-byte-compile: t" >> $@ echo ";; no-update-autoloads: t" >> $@ echo ";; End:" >> $@ echo ";;; mh-loaddefs.el ends here" >> $@ pre-mh-loaddefs.el-CMD: echo ;;; mh-loaddefs.el --- automatically extracted autoloads> $@ echo ;;>> $@ echo ;; Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.>> $@ echo ;; Author: Bill Wohler (wohler@newt.com)>> $@ echo ;; Keywords: mail>> $@ echo ;;; Commentary:>> $@ echo ;;; Change Log:>> $@ echo ;;; Code:>> $@ echo.>> $@ echo (provide 'mh-loaddefs)>> $@ echo ;; Local Variables:>> $@ echo ;; version-control: never>> $@ echo ;; no-byte-compile: t>> $@ echo ;; no-update-autoloads: t>> $@ echo ;; End:>> $@ echo ;;; mh-loaddefs.el ends here>> $@ # Prepare a bootstrap in the lisp subdirectory. # # Build loaddefs.el to make sure it's up-to-date. If it's not, that # might lead to errors during the bootstrap because something fails to # autoload as expected. If there is no emacs binary, then we can't # build autoloads yet. In that case we have to use ldefs-boot.el; # bootstrap should always work with ldefs-boot.el. (Because # loaddefs.el is an automatically generated file, we don't want to # store it in the source repository). # # Remove compiled Lisp files so that bootstrap-emacs will be built from # sources only. # Need separate version for sh and native cmd.exe # Note that bootstrap-clean-$(SHELLTYPE) copies ldefs-boot.el to loaddefs.el, # and thus the almost-empty loaddefs.el crafted by the $(lisp)/loaddefs.el # target can NOT be built _after_ bootstrap-clean-$(SHELLTYPE) does its # thing, or else an empty loaddefs.el will overwrite the full one. bootstrap-clean: $(lisp)/loaddefs.el $(MAKE) $(MFLAGS) bootstrap-clean-$(SHELLTYPE) bootstrap-clean-CMD: # if exist "$(EMACS)" $(MAKE) $(MFLAGS) autoloads cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el -for %%f in (. $(WINS)) do for %%g in (%%f\*.elc) do @$(DEL) %%g bootstrap-clean-SH: # if test -f "$(EMACS)"; then $(MAKE) $(MFLAGS) autoloads; fi # -rm -f $(lisp)/*.elc $(lisp)/*/*.elc cp $(lisp)/ldefs-boot.el $(lisp)/loaddefs.el -for dir in . $(WINS); do rm -f $$dir/*.elc; done # Generate/update files for the bootstrap process. # When done, remove bootstrap-emacs from ../bin, so that # it will not be mistaken for an installed binary. bootstrap: update-subdirs autoloads mh-autoloads compile finder-data custom-deps - $(DEL) "$(EMACS)" # # Assuming INSTALL_DIR is defined, copy the elisp files to it # Windows 95 makes this harder than it should be. # install: - mkdir "$(INSTALL_DIR)/lisp" - $(DEL) ../same-dir.tst - $(DEL) "$(INSTALL_DIR)/same-dir.tst" echo SameDirTest > "$(INSTALL_DIR)/same-dir.tst" #ifdef COPY_LISP_SOURCE $(IFNOTSAMEDIR) $(MAKE) $(MFLAGS) install-lisp-$(SHELLTYPE) $(ENDIF) #else # $(IFNOTSAMEDIR) $(CP_DIR) *.elc "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) cus-load.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) forms*.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) patcomp.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) subdirs.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) version.el "$(INSTALL_DIR)/lisp" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) mail/blessmail.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) mail/sc.el "$(INSTALL_DIR)/lisp/mail" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) play/bruce.el "$(INSTALL_DIR)/lisp/play" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) international/latin-*.el "$(INSTALL_DIR)/lisp/international" $(ENDIF) # $(IFNOTSAMEDIR) $(CP) international/mule-conf.el "$(INSTALL_DIR)/lisp/international" $(ENDIF) #endif - $(DEL) ../same-dir.tst - $(DEL) "$(INSTALL_DIR)/same-dir.tst" # Need to copy *.el files first, to avoid "source file is newer" annoyance # since cp does not preserve time stamps install-lisp-SH: cp -f *.el "$(INSTALL_DIR)/lisp" for dir in $(WINS); do [ -d "$(INSTALL_DIR)/lisp/$$dir" ] || mkdir "$(INSTALL_DIR)/lisp/$$dir"; done for dir in $(WINS); do cp -f $$dir/*.el "$(INSTALL_DIR)/lisp/$$dir"; done for dir in . $(WINS); do cp $$dir/*.elc "$(INSTALL_DIR)/lisp/$$dir"; done install-lisp-CMD: cp -f *.el "$(INSTALL_DIR)/lisp" for %%f in ($(WINS)) do if not exist "$(INSTALL_DIR)/lisp/%%f" mkdir "$(INSTALL_DIR)/lisp/%%f" for %%f in ($(WINS)) do cp -f %%f/*.el "$(INSTALL_DIR)/lisp/%%f" for %%f in (. $(WINS)) do cp -f %%f/*.elc "$(INSTALL_DIR)/lisp/%%f" # # Maintenance # # We used to delete *~ here, but that might inadvertently remove # precious files if it happens to match their short 8+3 aliases. clean: - $(DEL) *.el~