view build-ins.in @ 20553:a49deda9f5e6

(DECODE_POSITION): New macro. (CHAR_TO_BYTE, BYTE_TO_CHAR): New macros. (BEG_BYTE, BEGV_BYTE, PT_BYTE, GPT_BYTE) (ZV_BYTE, Z_BYTE): New macros. (BUF_BEG_BYTE, BUF_BEGV_BYTE, BUF_PT_BYTE, BUF_GPT_BYTE) (BUF_ZV_BYTE, BUF_Z_BYTE): New macros. (BUF_GAP_END_ADDR): New macro. (BEGV_ADDR, PT_ADDR, GPT_ADDR, GAP_END_ADDR, ZV_ADDR, Z_ADDR): Use the new ..._byte buffer data. (BUFFER_CEILING_OF, BUFFER_FLOOR_OF): Likewise. (BUF_GPT_ADDR, BUF_Z_ADDR): Likewise. (SET_PT_BOTH, TEMP_SET_PT_BOTH): New macros. (SET_PT, TEMP_SET_PT, BUF_SET_PT, BUF_TEMP_SET_PT): Call functions with new arg order. (SET_BUF_BEGV, SET_BUF_BEGV_BOTH): New macros. (SET_BUF_PT): Macro deleted. (SET_BUF_ZV): Set charpos and bytepos. (SET_BUF_ZV_BOTH, SET_BUF_PT_BOTH): New macros. (BYTE_POS_ADDR): Renamed from POS_ADDR. (CHAR_POS_ADDR): New macro. (FETCH_BYTE): Use BYTE_POS_ADDR. (FETCH_MULTIBYTE_CHAR): Use ..._BYTE macros. (BUF_CHAR_ADDRESS): Convert charpos to bytepos. (BUF_BYTE_ADDRESS): New macro, like the old BUF_CHAR_ADDRESS. (PTR_BYTE_POS): Renamed from PTR_CHAR_POS. (BUF_PTR_BYTE_POS): New macro. (BUF_FETCH_CHAR, BUF_FETCH_BYTE, BUF_FETCH_MULTIBYTE_CHAR): New macros. (struct buffer_text): New fields gpt_byte, z_byte. (struct buffer): New fields pt_byte, begv_byte, zv_byte.

#!/bin/sh -x
#
#Shell script for building and installing Emacs.

# ==================== Where To Install Things ====================

# The default location for installation.  Everything is placed in
# subdirectories of this directory.  This directory must exist when
# you start installation.  The default values for many of the
# variables below are expressed in terms of this one, so you may not
# need to change them.
prefix=/usr/local

# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
bindir=${prefix}/bin

# A directory under which we will install many of Emacs's files.  The
# default values for many of the variables below are expressed in
# terms of this one, so you may not need to change them.
emacsdir=${prefix}/emacs-19.0

# Where to install and expect the architecture-independent data files
# (like the tutorial and the Zippy database).
datadir=${emacsdir}/etc

# Where to install the elisp files distributed with Emacs.  Strictly
# speaking, all the elisp files should go under datadir (above), since
# both elisp source and compiled elisp are completely portable, but
# it's traditional to give the lisp files their own subdirectory.
lispdir=${emacsdir}/lisp

# Directories Emacs should search for elisp files specific to this
# site (i.e. customizations), before consulting ${lispdir}.  This
# should be a colon-separated list of directories.
locallisppath=${emacsdir}/local-lisp

# Where Emacs will search to find its elisp files.  Before changing
# this, check to see if your purpose wouldn't better be served by
# changing locallisppath.  This should be a colon-separated list of
# directories.
lisppath=${locallisppath}:${lispdir}

# Where Emacs will search for its elisp files before dumping.  This is
# only used during the process of compiling Emacs, to help Emacs find
# its lisp files before they've been installed in their final
# location.  It's usually identical to lisppath, except that the entry
# for the directory containing the installed lisp files has been
# replaced with ../lisp.  This should be a colon-separated list of
# directories.
dumplisppath=../lisp

# Where to install and expect the files that Emacs modifies as it
# runs.	 These files are all architecture-independent.	Right now,
# the only such data is the locking directory.
statedir=${emacsdir}

# Where to create and expect the locking directory, where the Emacs
# locking code keeps track of which files are currently being edited.
lockdir=${statedir}/lock

# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data.
libdir=${emacsdir}/arch-lib

# Where to install Emacs's man pages.
mandir=/usr/man/man1

# Where to install and expect the info files describing Emacs.	In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# since there are now many packages documented with the texinfo
# system, it is inappropriate to imply that it is part of Emacs.
infodir=${prefix}/info

removenullpaths="sed -e 's/^://' -e 's/:"'$'"//' -e 's/::/:/'"

lisppath=`echo ${lisppath} | ${removenullpaths}` ;		\
dumplisppath=`echo ${dumplisppath} | ${removenullpaths}` ;	\
/bin/sed < src/paths.h.in > src/paths.h				\
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";'		\
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${dumplisppath}'";'	\
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${libdir}";'			\
-e 's;\(#.*PATH_DATA\).*$$;\1 "${datadir}";'			\
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";'

(cd lib-src; make) || exit 1
(cd src; make) || exit 1

# Subdirectories to install, and where they'll go.
copydir=arch-lib etc info lisp
copydests=${libdir} ${datadir} ${infodir} ${lispdir}

# If any of the directories are below ${emacsdir} or ${statedir}, create them.
for dir in ${copydests}; do
  case "${dir}" in
    ${emacsdir}/* )
      if [ ! -d ${emacsdir} ]; then
	mkdir ${emacsdir}
	chmod 777 ${emacsdir}
      fi
    ;;
    ${statedir}/* )
      if [ ! -d ${statedir} ]; then
	mkdir ${statedir}
	chmod 777 ${statedir}
      fi
    ;;
  esac
done

set ${copydests}
for dir in ${copydir} ; do
  dest=$1 ; shift
  mv ${dir} ${dest}
  if [ $? != 0 ]; then
    echo mv ${dir} to ${dest} failed -- using tar to copy.
    if [ `/bin/pwd`/${dir} != `(cd ${dest}; /bin/pwd)` ] ; then
      (cd ${dir}; tar cf - . ) | (cd ${dest}; umask 0; tar xf - )
      if [ $? != 0 ]; then
	echo "tar-copying ${dir} to ${dest} failed too.  I give up."
	exit 1
      fi
      for subdir in `find ${dest} -type d ! -name RCS -print` ; do
	rm -rf ${subdir}/RCS
	rm -f  ${subdir}/\#*
	rm -f  ${subdir}/*~
      done
    fi
  fi
done

cp ${libdir}/[ce]tags ${bindir}
mv src/emacs ${BINDIR}/emacs
rm src/temacs
chmod 777 ${bindir}/[ce]tags ${bindir}/emacs