Mercurial > emacs
view src/s/dgux.h @ 54246:a4bd1232eb74
*** empty log message ***
author | Stefan Monnier <monnier@iro.umontreal.ca> |
---|---|
date | Tue, 02 Mar 2004 22:13:02 +0000 |
parents | 695cf19ef79e |
children | 23a17af379b1 375f2633d815 |
line wrap: on
line source
/* Definitions file for GNU Emacs running on Data General's DG/UX version 4.32 upto and including 5.4.1. Copyright (C) 1994, 1999 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* * Define symbols to identify the version of Unix this is. * Define all the symbols that apply correctly. */ /* #define UNIPLUS */ /* #define USG5 */ /* #define USG */ /* #define HPUX */ /* #define UMAX */ /* #define BSD4_1 */ #define BSD4_2 #define BSD4_3 #define BSD4_4 #define BSD_SYSTEM /* SYSTEM_TYPE should indicate the kind of system you are using. It sets the Lisp variable system-type. */ #define SYSTEM_TYPE "dgux" /* NOMULTIPLEJOBS should be defined if your system's shell does not have "job control" (the ability to stop a program, run some other program, then continue the first one). */ /* #define NOMULTIPLEJOBS */ /* Emacs can read input using SIGIO and buffering characters itself, or using CBREAK mode and making C-g cause SIGINT. The choice is controlled by the variable interrupt_input. Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO) SIGIO can be used only on systems that implement it (4.2 and 4.3). CBREAK mode has two disadvantages 1) At least in 4.2, it is impossible to handle the Meta key properly. I hear that in system V this problem does not exist. 2) Control-G causes output to be discarded. I do not know whether this can be fixed in system V. Another method of doing input is planned but not implemented. It would have Emacs fork off a separate process to read the input and send it to the true Emacs process through a pipe. */ #define INTERRUPT_INPUT /* * Define HAVE_SOCKETS if the system supports sockets. */ #define HAVE_SOCKETS /* * Define HAVE_UNIX_DOMAIN if the system supports Unix * domain sockets. */ #define HAVE_UNIX_DOMAIN /* * Define HAVE_PTYS if the system supports pty devices. */ #define HAVE_PTYS /* * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate * The 4.2 opendir, etc., library functions. */ /* #define NONSYSTEM_DIR_LIBRARY */ /* Define this symbol if your system has the functions bcopy, etc. */ #define BSTRING /* subprocesses should be defined if you want to have code for asynchronous subprocesses (as used in M-x compile and M-x shell). This is generally OS dependent, and not supported under most USG systems. */ #define subprocesses /* If your system uses COFF (Common Object File Format) then define the preprocessor symbol "COFF". DGUX can use either COFF or ELF; the default is ELF. To compile for COFF (or BCS) use the TARGET_BINARY_INTERFACE environment variable. */ #if defined(_DGUXCOFF_TARGET) || defined(_DGUXBCS_TARGET) #undef ELF #ifndef COFF #define COFF #endif /* COFF */ #else /* defined(_DGUXCOFF_TARGET) || defined(_DGUXBCS_TARGET) */ #undef COFF #ifndef ELF #define ELF #endif /* ELF */ #endif /* defined(_DGUXCOFF_TARGET) || defined(_DGUXBCS_TARGET) */ #ifndef COFF /* People will probably find this apparently unreliable till the NFS dumping bug is fixed. */ /* It is possible to undump to ELF with DG/UX 5.4, but for revisions below 5.4.1 the undump MUST be done on a local file system, or the kernel will panic. ELF executables have the advantage of using shared libraries, while COFF executables will still work on 4.2x systems. */ #define UNEXEC unexelf.o /* This makes sure that all segments in the executable are undumped, not just text, data, and bss. In the case of Mxdb and shared libraries, additional information is stored in other sections. It does not hurt to have this defined if you don't use Mxdb or shared libraries. In fact, it makes no difference. */ /* Necessary for shared libraries and Mxdb debugging information. */ #define USG_SHARED_LIBRARIES #endif /* define MAIL_USE_FLOCK if the mailer uses flock to interlock access to /usr/spool/mail/$USER. The alternative is that a lock file named /usr/spool/mail/$USER.lock. */ /* #define MAIL_USE_FLOCK */ /* Define CLASH_DETECTION if you want lock files to be written so that Emacs can tell instantly when you try to modify a file that someone else has modified in his Emacs. */ /* #define CLASH_DETECTION */ /* Define a replacement for the baud rate switch, since DG/UX uses a different from BSD. */ #define BAUD_CONVERT { 0, 110, 134, 150, 300, 600, 1200, 1800, 2400, \ 4800, 9600, 19200, 38400 } /* * Make WM Interface Compliant. */ #define XICCC /* Here, on a separate page, add any special hacks needed to make Emacs work on this system. For example, you might define certain system call names that don't exist on your system, or that do different things on your system and must be used only through an encapsulation (Which you should place, by convention, in sysdep.c). */ /* Some compilers tend to put everything declared static into the initialized data area, which becomes pure after dumping Emacs. On these systems, you must #define static as nothing to foil this. Note that emacs carefully avoids static vars inside functions. */ /* #define static */ /* DG/UX SPECIFIC ADDITIONS TO TEMPLATE FOLLOW: */ /* Use the Berkeley flavors of the library routines, instead of System V. */ #define setpgrp(pid,pgrp) setpgrp2(pid,pgrp) #define getpgrp(pid) getpgrp2(pid) /* Act like Berkeley. */ #define _setjmp(env) sigsetjmp(env,0) #define _longjmp(env,val) longjmp(env,val) /* Use TERMINFO instead of termcap */ #define TERMINFO /* * Send signals to subprocesses using characters. * */ #define SIGNALS_VIA_CHARACTERS /* * Define HAVE_TERMIOS since this is POSIX, * for terminal control. Prevent redundant inclusion of termio.h. */ #define HAVE_TERMIOS #define NO_TERMIO /* * Use a Berkeley style sys/wait.h. * This makes WIF* macros operate on structures instead of ints. */ #define _BSD_WAIT_FLAVOR /* * Use BSD and POSIX-style signals. This is crucial! */ /* #define SYSTEM_MALLOC */ /* MAKING_MAKEFILE must be defined in "ymakefile" before including config.h */ #ifndef NOT_C_CODE /* Make sure signal.h is included so macros below don't mess with it. */ /* DG/UX include files prevent multiple inclusion. */ #include <signal.h> /* but undefine the sigmask and sigpause macros since they will get #define'd later. */ #undef sigmask #undef sigpause #define POSIX_SIGNALS #ifndef NO_DGUX_SIGNAL_REDEF /* Can't use sys_signal because then etc/server.c would need sysdep.o. */ extern struct sigaction act, oact; #define signal(SIG,FUNC) berk_signal(SIG,FUNC) #endif #endif /* not NOT_C_CODE */ #ifndef __GNUC__ #error You must use GCC to compiler Emascs on DGUX #endif #define ORDINARY_LINK #define START_FILES pre-crt0.o #define LIB_GCC /usr/lib/gcc/libgcc.a #ifdef _M88KBCS_TARGET /* Karl Berry says: the environment recommended by gcc (88/open, a.k.a. m88kbcs) doesn't support some system functions, and gcc doesn't make it easy to switch environments. */ #define NO_GET_LOAD_AVG #endif /* definitions for xmakefile production */ #ifdef COFF /* Define the following to use all of the available pty's. */ #define PTY_ITERATION \ for (c = 'p'; c < 't'; c++) \ for (i = 0; (((c == 'p') && (i < 64)) || ((c != 'p') && (i < 16))); i++) #define PTY_NAME_SPRINTF \ if (c == 'p') \ sprintf (pty_name, "/dev/pty%c%d", c, i); \ else \ sprintf (pty_name, "/dev/pty%c%x", c, i); #define PTY_TTY_NAME_SPRINTF \ if (c == 'p') \ sprintf (pty_name, "/dev/tty%c%d", c, i); \ else \ sprintf (pty_name, "/dev/tty%c%x", c, i); #define C_DEBUG_SWITCH -g #else /* not COFF */ /* We are generating ELF object format. This makes the system more SVR4 like. */ #define SVR4 /* Pseudo-terminal support under SVR4 only loops to deal with errors. */ #define PTY_ITERATION for (i = 0; i < 1; i++) /* This sets the name of the master side of the PTY. */ #define PTY_NAME_SPRINTF strcpy (pty_name, "/dev/ptmx"); /* This sets the name of the slave side of the PTY. On SysVr4, grantpt(3) forks a subprocess, so keep sigchld_handler() from intercepting that death. If any child but grantpt's should die within, it should be caught after sigrelse(2). */ #define PTY_TTY_NAME_SPRINTF \ { \ char *ptsname(), *ptyname; \ \ sigblock(sigmask(SIGCLD)); \ if (grantpt(fd) == -1) \ fatal("could not grant slave pty"); \ sigunblock(sigmask(SIGCLD)); \ if (unlockpt(fd) == -1) \ fatal("could not unlock slave pty"); \ if (!(ptyname = ptsname(fd))) \ fatal ("could not enable slave pty"); \ strncpy(pty_name, ptyname, sizeof(pty_name)); \ pty_name[sizeof(pty_name) - 1] = 0; \ } /* Push various streams modules onto a PTY channel. */ #define SETUP_SLAVE_PTY \ if (ioctl (xforkin, I_PUSH, "ptem") == -1) \ fatal ("ioctl I_PUSH ptem", errno); \ if (ioctl (xforkin, I_PUSH, "ldterm") == -1) \ fatal ("ioctl I_PUSH ldterm", errno); \ if (ioctl (xforkin, I_PUSH, "ttcompat") == -1) \ fatal ("ioctl I_PUSH ttcompat", errno); #ifdef __GNUC__ #define C_DEBUG_SWITCH -g -V2 -mversion-03.00 -mstandard #endif #endif /* ELF */ /* Extra stuff which probably should be someplace else but is here out of expediency. */ #define LIB_X11_LIB -lX11 #define LIB_MOTIF -lXm -lgen /* Process groups work in the traditional BSD manner. */ #define BSD_PGRPS /* arch-tag: 1b6d117d-82d2-4480-a6d0-3f7a8360f658 (do not change this comment) */