Mercurial > emacs
view build-ins.in @ 18260:a642c99198ec
(PTR_TO_OFFSET): New macro.
(POS_AS_IN_BUFFER): New macro.
(SYNTAX_ENTRY_VIA_PROPERTY): Set to take `syntax-table' text
property into account when doing SYNTAX (c).
(re_compile_fastmap): disable fastmap if any of wordbound
notwordbound wordbeg wordend notsyntaxspec syntaxspec are seen.
(re_search_2): SETUP_SYNTAX_TABLE_FOR_OBJECT at the start.
(re_match_object): New variable.
(re_match_2): SETUP_SYNTAX_TABLE_FOR_OBJECT at the start.
(re_match_2_internal): For any of wordbound notwordbound wordbeg
wordend notsyntaxspec syntaxspec call UPDATE_SYNTAX_TABLE before
doing SYNTAX (c).
[emacs]: Include charset.h and category.h
[!emacs] (BASE_LEADING_CODE_P, WORD_BOUNDARY_P, CHAR_HEAD_P,
SINGLE_BYTE_CHAR_P, SAME_CHARSET_P, MULTIBYTE_FORM_LENGTH,
STRING_CHAR_AND_LENGTH, GET_CHAR_AFTER_2, GET_CHAR_BEFORE_2):
New dummy macros.
(enum re_opcode_t): New member categoryspec and notcategoryspec.
(STORE_CHARACTER_AND_INCR, EXTRACT_CHARACTER,
CHARSET_LOOKUP_RANGE_TABLE_WITH_COUNT,
CHARSET_LOOKUP_RANGE_TABLE, CHARSET_BITMAP_SIZE,
CHARSET_RANGE_TABLE_EXISTS_P, CHARSET_RANGE_TABLE
CHARSET_PAST_RANGE_TABLE): New macros.
(TRANSLATE): Cast return value to unsigned char, not char.
(struct range_table_work_area): New structure.
(EXTEND_RANGE_TABLE_WORK_AREA, SET_RANGE_TABLE_WORK_AREA,
FREE_RANGE_TABLE_WORK_AREA, CLEAR_RANGE_TABLE_WORK_USED,
RANGE_TABLE_WORK_USED, RANGE_TABLE_WORK_ELT): New macros.
(FREE_STACK_RETURN): Call FREE_RANGE_TABLE_WORK_AREA.
(regex_compile): Declare `c' and `c1' as int to store multibyte characters.
Declare range_table_work and initialize it.
Initialize bufp->multibyte to 0 if not emacs.
For case '[' and `default', code re-written to handle multibyte characters.
Add code for case 'c' and 'C' to handle category spec.
(re_compile_fastmap): New local variables k, simple_char_max,
and match_any_multibyte_characters.
Use macro CHARSET_BITMAP_SIZE.
Handle multibyte characters in cases charset, charset_not,
wordchar, notwordchar, anychar, syntaxspec, notsyntaxspec,
categoryspec, notcategoryspec.
(STOP_ADDR_VSTRING, POS_ADDR_VSTRING): New macros.
(re_search_2): Code re-written to handle multibyte characters.
(AT_WORD_BOUNDARY): Macro disabled.
(re_match_2_internal): New local variable multibyte. `d' is
incremented while paying attention to multibyte characters if necessary.
For case charset, charsetnot, wordbound, notwordbound,
wordbeg, wordend, matchsyntax, and matchnotsyntax, code
re-written to handle multibyte characters.
Add code for case categoryspec and notcategoryspec.
Declare c, c1 as unsigned int, not unsigned char.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sun, 15 Jun 1997 19:00:12 +0000 |
parents | 1541c518f769 |
children |
line wrap: on
line source
#!/bin/sh -x # #Shell script for building and installing Emacs. # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in # subdirectories of this directory. This directory must exist when # you start installation. The default values for many of the # variables below are expressed in terms of this one, so you may not # need to change them. prefix=/usr/local # Where to install Emacs and other binaries that people will want to # run directly (like etags). bindir=${prefix}/bin # A directory under which we will install many of Emacs's files. The # default values for many of the variables below are expressed in # terms of this one, so you may not need to change them. emacsdir=${prefix}/emacs-19.0 # Where to install and expect the architecture-independent data files # (like the tutorial and the Zippy database). datadir=${emacsdir}/etc # Where to install the elisp files distributed with Emacs. Strictly # speaking, all the elisp files should go under datadir (above), since # both elisp source and compiled elisp are completely portable, but # it's traditional to give the lisp files their own subdirectory. lispdir=${emacsdir}/lisp # Directories Emacs should search for elisp files specific to this # site (i.e. customizations), before consulting ${lispdir}. This # should be a colon-separated list of directories. locallisppath=${emacsdir}/local-lisp # Where Emacs will search to find its elisp files. Before changing # this, check to see if your purpose wouldn't better be served by # changing locallisppath. This should be a colon-separated list of # directories. lisppath=${locallisppath}:${lispdir} # Where Emacs will search for its elisp files before dumping. This is # only used during the process of compiling Emacs, to help Emacs find # its lisp files before they've been installed in their final # location. It's usually identical to lisppath, except that the entry # for the directory containing the installed lisp files has been # replaced with ../lisp. This should be a colon-separated list of # directories. dumplisppath=../lisp # Where to install and expect the files that Emacs modifies as it # runs. These files are all architecture-independent. Right now, # the only such data is the locking directory. statedir=${emacsdir} # Where to create and expect the locking directory, where the Emacs # locking code keeps track of which files are currently being edited. lockdir=${statedir}/lock # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. libdir=${emacsdir}/arch-lib # Where to install Emacs's man pages. mandir=/usr/man/man1 # Where to install and expect the info files describing Emacs. In the # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but # since there are now many packages documented with the texinfo # system, it is inappropriate to imply that it is part of Emacs. infodir=${prefix}/info removenullpaths="sed -e 's/^://' -e 's/:"'$'"//' -e 's/::/:/'" lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ dumplisppath=`echo ${dumplisppath} | ${removenullpaths}` ; \ /bin/sed < src/paths.h.in > src/paths.h \ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${dumplisppath}'";' \ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${libdir}";' \ -e 's;\(#.*PATH_DATA\).*$$;\1 "${datadir}";' \ -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";' (cd lib-src; make) || exit 1 (cd src; make) || exit 1 # Subdirectories to install, and where they'll go. copydir=arch-lib etc info lisp copydests=${libdir} ${datadir} ${infodir} ${lispdir} # If any of the directories are below ${emacsdir} or ${statedir}, create them. for dir in ${copydests}; do case "${dir}" in ${emacsdir}/* ) if [ ! -d ${emacsdir} ]; then mkdir ${emacsdir} chmod 777 ${emacsdir} fi ;; ${statedir}/* ) if [ ! -d ${statedir} ]; then mkdir ${statedir} chmod 777 ${statedir} fi ;; esac done set ${copydests} for dir in ${copydir} ; do dest=$1 ; shift mv ${dir} ${dest} if [ $? != 0 ]; then echo mv ${dir} to ${dest} failed -- using tar to copy. if [ `/bin/pwd`/${dir} != `(cd ${dest}; /bin/pwd)` ] ; then (cd ${dir}; tar cf - . ) | (cd ${dest}; umask 0; tar xf - ) if [ $? != 0 ]; then echo "tar-copying ${dir} to ${dest} failed too. I give up." exit 1 fi for subdir in `find ${dest} -type d ! -name RCS -print` ; do rm -rf ${subdir}/RCS rm -f ${subdir}/\#* rm -f ${subdir}/*~ done fi fi done cp ${libdir}/[ce]tags ${bindir} mv src/emacs ${BINDIR}/emacs rm src/temacs chmod 777 ${bindir}/[ce]tags ${bindir}/emacs