Mercurial > emacs
view lisp/view.el @ 18260:a642c99198ec
(PTR_TO_OFFSET): New macro.
(POS_AS_IN_BUFFER): New macro.
(SYNTAX_ENTRY_VIA_PROPERTY): Set to take `syntax-table' text
property into account when doing SYNTAX (c).
(re_compile_fastmap): disable fastmap if any of wordbound
notwordbound wordbeg wordend notsyntaxspec syntaxspec are seen.
(re_search_2): SETUP_SYNTAX_TABLE_FOR_OBJECT at the start.
(re_match_object): New variable.
(re_match_2): SETUP_SYNTAX_TABLE_FOR_OBJECT at the start.
(re_match_2_internal): For any of wordbound notwordbound wordbeg
wordend notsyntaxspec syntaxspec call UPDATE_SYNTAX_TABLE before
doing SYNTAX (c).
[emacs]: Include charset.h and category.h
[!emacs] (BASE_LEADING_CODE_P, WORD_BOUNDARY_P, CHAR_HEAD_P,
SINGLE_BYTE_CHAR_P, SAME_CHARSET_P, MULTIBYTE_FORM_LENGTH,
STRING_CHAR_AND_LENGTH, GET_CHAR_AFTER_2, GET_CHAR_BEFORE_2):
New dummy macros.
(enum re_opcode_t): New member categoryspec and notcategoryspec.
(STORE_CHARACTER_AND_INCR, EXTRACT_CHARACTER,
CHARSET_LOOKUP_RANGE_TABLE_WITH_COUNT,
CHARSET_LOOKUP_RANGE_TABLE, CHARSET_BITMAP_SIZE,
CHARSET_RANGE_TABLE_EXISTS_P, CHARSET_RANGE_TABLE
CHARSET_PAST_RANGE_TABLE): New macros.
(TRANSLATE): Cast return value to unsigned char, not char.
(struct range_table_work_area): New structure.
(EXTEND_RANGE_TABLE_WORK_AREA, SET_RANGE_TABLE_WORK_AREA,
FREE_RANGE_TABLE_WORK_AREA, CLEAR_RANGE_TABLE_WORK_USED,
RANGE_TABLE_WORK_USED, RANGE_TABLE_WORK_ELT): New macros.
(FREE_STACK_RETURN): Call FREE_RANGE_TABLE_WORK_AREA.
(regex_compile): Declare `c' and `c1' as int to store multibyte characters.
Declare range_table_work and initialize it.
Initialize bufp->multibyte to 0 if not emacs.
For case '[' and `default', code re-written to handle multibyte characters.
Add code for case 'c' and 'C' to handle category spec.
(re_compile_fastmap): New local variables k, simple_char_max,
and match_any_multibyte_characters.
Use macro CHARSET_BITMAP_SIZE.
Handle multibyte characters in cases charset, charset_not,
wordchar, notwordchar, anychar, syntaxspec, notsyntaxspec,
categoryspec, notcategoryspec.
(STOP_ADDR_VSTRING, POS_ADDR_VSTRING): New macros.
(re_search_2): Code re-written to handle multibyte characters.
(AT_WORD_BOUNDARY): Macro disabled.
(re_match_2_internal): New local variable multibyte. `d' is
incremented while paying attention to multibyte characters if necessary.
For case charset, charsetnot, wordbound, notwordbound,
wordbeg, wordend, matchsyntax, and matchnotsyntax, code
re-written to handle multibyte characters.
Add code for case categoryspec and notcategoryspec.
Declare c, c1 as unsigned int, not unsigned char.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sun, 15 Jun 1997 19:00:12 +0000 |
parents | 4eabe22131dd |
children | a42f063f003b |
line wrap: on
line source
;;; view.el --- peruse file or buffer without editing. ;; Copyright (C) 1985, 1989, 1994, 1995, 1997 Free Software Foundation, Inc. ;; Author: K. Shane Hartman ;; Maintainer: FSF ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to the ;; Free Software Foundation, Inc., 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA. ;;; Commentary: ;; This package provides the `view' minor mode documented in the Emacs ;; user's manual. ;; View mode entry and exit is done through the functions view-mode-enter ;; and view-mode-exit. Use these functions to enter or exit view-mode from ;; emacs lisp programs. ;; We use both view- and View- as prefix for symbols. View- is used as ;; prefix for commands that have a key binding. view- is used for commands ;; without key binding. The purpose of this is to make it easier for a ;; user to use command name completion. ;;; Suggested key bindings: ;; ;; (define-key ctl-x-4-map "v" 'view-file-other-window) ; ^x4v ;; (define-key ctl-x-5-map "v" 'view-file-other-frame) ; ^x5v ;; ;; You could also bind view-file, view-buffer, view-buffer-other-window and ;; view-buffer-other-frame to keys. ;;; Code: ;;;###autoload (defvar view-highlight-face 'highlight "*The face used for highlighting the match found by View mode search.") ;; `view-mode-auto-exit' is replaced by the following global variable which ;; only says if scrolling past buffer end should leave view mode or not, it ;; doesn't say if leaving view mode should restore windows or not. The latter ;; is now controlled by the presence of a value in `view-return-to-alist'. ;;;###autoload (defvar view-scroll-auto-exit nil "*Non-nil means scrolling past the end of buffer exits View mode. nil means attempting to scroll past the end of the buffer, only rings the bell and gives a message on how to leave.") ;;;###autoload (defvar view-try-extend-at-buffer-end nil "*Non-nil means try load more of file when reaching end of buffer.") ;;;###autoload (defvar view-remove-frame-by-deleting nil "*Determine how to remove a not needed frame. If nil, make an icon of the frame. If non-nil, delete the frame.") ;;;###autoload (defvar view-exit-all-windows-at-exit nil "*Non-nil means restore all windows displaying buffer. Commands that restore windows apply to all windows displaying buffer. Buffer is removed from all windows displaying it, by using information in `view-return-to-alist' if that is available, otherwise by using `replace-buffer-in-windows'.") (defvar view-mode nil "Non-nil if View mode is enabled.") (make-variable-buffer-local 'view-mode) (defvar view-mode-hook nil "Normal hook run when starting to view a buffer or file.") (defvar view-old-buffer-read-only nil) (make-variable-buffer-local 'view-old-buffer-read-only) (defvar view-old-Helper-return-blurb) (make-variable-buffer-local 'view-old-Helper-return-blurb) (defvar view-page-size nil "Default number of lines to scroll by View page commands. If nil then the local value of this is initially set to window size.") (make-variable-buffer-local 'view-page-size) (defvar view-half-page-size nil "Default number of lines to scroll by View half page commands. If nil then the local value of this is initially set to half window size.") (make-variable-buffer-local 'view-half-page-size) (defvar view-last-regexp nil) (make-variable-buffer-local 'view-last-regexp) ; Global is better??? (defvar view-return-to-alist nil "What to do with selected window and where to go when leaving View mode. Added to by view-mode-enter when entering View mode. See RETURN-TO-ALIST argument of function `view-mode-exit' for format of `view-return-to-alist'.") (make-variable-buffer-local 'view-return-to-alist) (defvar view-exit-action nil "\\<view-mode-map> nil or a function with one argument (a buffer) called at exit of view mode. The \\[view-file] and \\[view-file-other-window] commands may set this to `kill-buffer'.") (make-variable-buffer-local 'view-exit-action) (defvar view-overlay nil "Overlay used to display where a search operation found its match. This is local in each buffer, once it is used.") (make-variable-buffer-local 'view-overlay) (or (assq 'view-mode minor-mode-alist) (setq minor-mode-alist (cons '(view-mode " View") minor-mode-alist))) ;; Define keymap inside defvar to make it easier to load changes. (defvar view-mode-map (let ((map (make-sparse-keymap))) (define-key map "C" 'View-kill-and-leave) (define-key map "c" 'View-leave) (define-key map "Q" 'View-quit-all) (define-key map "E" 'View-exit-and-edit) ; (define-key map "v" 'View-exit) (define-key map "e" 'View-exit) (define-key map "q" 'View-quit) ; (define-key map "N" 'View-search-last-regexp-backward) (define-key map "p" 'View-search-last-regexp-backward) (define-key map "n" 'View-search-last-regexp-forward) ; (define-key map "?" 'View-search-regexp-backward) ; Less does this. (define-key map "\\" 'View-search-regexp-backward) (define-key map "/" 'View-search-regexp-forward) (define-key map "r" 'isearch-backward) (define-key map "s" 'isearch-forward) (define-key map "m" 'point-to-register) (define-key map "'" 'register-to-point) (define-key map "x" 'exchange-point-and-mark) (define-key map "@" 'View-back-to-mark) (define-key map "." 'set-mark-command) (define-key map "%" 'View-goto-percent) ; (define-key map "G" 'View-goto-line-last) (define-key map "g" 'View-goto-line) (define-key map "=" 'what-line) (define-key map "F" 'View-revert-buffer-scroll-page-forward) ; (define-key map "k" 'View-scroll-line-backward) (define-key map "y" 'View-scroll-line-backward) ; (define-key map "j" 'View-scroll-line-forward) (define-key map "\n" 'View-scroll-line-forward) (define-key map "\r" 'View-scroll-line-forward) (define-key map "u" 'View-scroll-half-page-backward) (define-key map "d" 'View-scroll-half-page-forward) (define-key map "z" 'View-scroll-page-forward-set-page-size) (define-key map "w" 'View-scroll-page-backward-set-page-size) ; (define-key map "b" 'View-scroll-page-backward) (define-key map "\C-?" 'View-scroll-page-backward) ; (define-key map "f" 'View-scroll-page-forward) (define-key map " " 'View-scroll-page-forward) (define-key map "o" 'View-scroll-to-buffer-end) (define-key map ">" 'end-of-buffer) (define-key map "<" 'beginning-of-buffer) (define-key map "-" 'negative-argument) (define-key map "9" 'digit-argument) (define-key map "8" 'digit-argument) (define-key map "7" 'digit-argument) (define-key map "6" 'digit-argument) (define-key map "5" 'digit-argument) (define-key map "4" 'digit-argument) (define-key map "3" 'digit-argument) (define-key map "2" 'digit-argument) (define-key map "1" 'digit-argument) (define-key map "0" 'digit-argument) (define-key map "H" 'describe-mode) (define-key map "?" 'describe-mode) ; Maybe do as less instead? (define-key map "h" 'describe-mode) map)) (or (assq 'view-mode minor-mode-map-alist) (setq minor-mode-map-alist (cons (cons 'view-mode view-mode-map) minor-mode-map-alist))) ;; Always leave view mode before changing major mode. ;; This is to guarantee that the buffer-read-only variable is restored. (add-hook 'change-major-mode-hook 'view-mode-disable) ;;; Commands that enter or exit view mode. ;;;###autoload (defun view-file (file-name) "View FILE in View mode, returning to previous buffer when done. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'." (interactive "fView file: ") (let ((had-a-buf (get-file-buffer file-name))) (view-buffer (find-file-noselect file-name) (and (not had-a-buf) 'kill-buffer)))) ;;;###autoload (defun view-file-other-window (file-name) "View FILE in View mode in another window. Return that window to its previous buffer when done. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'." (interactive "fIn other window view file: ") (let ((had-a-buf (get-file-buffer file-name))) (view-buffer-other-window (find-file-noselect file-name) nil (and (not had-a-buf) 'kill-buffer)))) ;;;###autoload (defun view-file-other-frame (file-name) "View FILE in View mode in another frame. Maybe delete other frame and/or return to previous buffer when done. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'." (interactive "fIn other frame view file: ") (let ((had-a-buf (get-file-buffer file-name))) (view-buffer-other-frame (find-file-noselect file-name) nil (and (not had-a-buf) 'kill-buffer)))) ;;;###autoload (defun view-buffer (buffer-name &optional exit-action) "View BUFFER in View mode, returning to previous buffer when done. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. Optional argument EXIT-ACTION is either nil or a function with buffer as argument. This function is called when finished viewing buffer. Use this argument instead of explicitly setting `view-exit-action'." (interactive "bView buffer: ") (let ((undo-window (list (window-buffer) (window-start) (window-point)))) (switch-to-buffer buffer-name) (view-mode-enter (cons (selected-window) (cons nil undo-window)) exit-action))) ;;;###autoload (defun view-buffer-other-window (buffer-name &optional not-return exit-action) "View BUFFER in View mode in another window. Return to previous buffer when done, unless optional NOT-RETURN is non-nil. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. Optional argument EXIT-ACTION is either nil or a function with buffer as argument. This function is called when finished viewing buffer. Use this argument instead of explicitly setting `view-exit-action'." (interactive "bIn other window view buffer:\nP") (let* ((win ; This window will be selected by (get-lru-window)) ; switch-to-buffer-other-window below. (return-to (and (not not-return) (cons (selected-window) (if (eq win (selected-window)) t ; Has to make new window. (list (window-buffer win) ; Other windows old buffer. (window-start win) (window-point win))))))) (switch-to-buffer-other-window buffer-name) (view-mode-enter (and return-to (cons (selected-window) return-to)) exit-action))) ;;;###autoload (defun view-buffer-other-frame (buffer-name &optional not-return exit-action) "View BUFFER in View mode in another frame. Return to previous buffer when done, unless optional NOT-RETURN is non-nil. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. Optional argument EXIT-ACTION is either nil or a function with buffer as argument. This function is called when finished viewing buffer. Use this argument instead of explicitly setting `view-exit-action'." (interactive "bView buffer in other frame: \nP") (let ((return-to (and (not not-return) (cons (selected-window) t)))) ; Old window. (switch-to-buffer-other-frame buffer-name) (view-mode-enter (and return-to (cons (selected-window) return-to)) exit-action))) ;;;###autoload (defun view-mode (&optional arg) ;; In the following documentation string we have to use some explicit key ;; bindings instead of using the \\[] construction. The reason for this ;; is that most commands have more than one key binding. "Toggle View mode, a minor mode for viewing text but not editing it. With arg, turn View mode on iff arg is positive. Emacs commands that do not change the buffer contents are available as usual. Kill commands insert text in kill buffers but do not delete. Other commands \(among them most letters and punctuation) beep and tell that the buffer is read-only. \\<view-mode-map> The following additional commands are provided. Most commands take prefix arguments. Page commands default to \"page size\" lines which is almost a whole window full, or number of lines set by \\[View-scroll-page-forward-set-page-size] or \\[View-scroll-page-backward-set-page-size]. Half page commands default to and set \"half page size\" lines which initially is half a window full. Search commands default to a repeat count of one. H, h, ? This message. Digits provide prefix arguments. \\[negative-argument] negative prefix argument. \\[beginning-of-buffer] move to the beginning of buffer. > move to the end of buffer. \\[View-scroll-to-buffer-end] scroll so that buffer end is at last line of window. SPC scroll forward prefix (default \"page size\") lines. DEL scroll backward prefix (default \"page size\") lines. \\[View-scroll-page-forward-set-page-size] like \\[View-scroll-page-forward] except prefix sets \"page size\". \\[View-scroll-page-backward-set-page-size] like \\[View-scroll-page-backward] except prefix sets \"page size\". \\[View-scroll-half-page-forward] scroll forward (and if prefix set) \"half page size\" lines. \\[View-scroll-half-page-backward] scroll backward (and if prefix set) \"half page size\" lines. RET, LFD scroll forward prefix (default one) line(s). y scroll backward prefix (default one) line(s). \\[View-revert-buffer-scroll-page-forward] revert-buffer if necessary and scroll forward. Use this to view a changing file. \\[what-line] prints the current line number. \\[View-goto-percent] goes prefix argument (default 100) percent into buffer. \\[View-goto-line] goes to line given by prefix argument (default first line). . set the mark. x exchanges point and mark. \\[View-back-to-mark] return to mark and pops mark ring. Mark ring is pushed at start of every successful search and when jump to line occurs. The mark is set on jump to buffer start or end. \\[point-to-register] save current position in character register. ' go to position saved in character register. s do forward incremental search. r do reverse incremental search. \\[View-search-regexp-forward] searches forward for regular expression, starting after current page. ! and @ have a special meaning at the beginning of the regexp. ! means search for a line with no match for regexp. @ means start search at beginning (end for backward search) of buffer. \\ searches backward for regular expression, starting before current page. \\[View-search-last-regexp-forward] searches forward for last regular expression. p searches backward for last regular expression. \\[View-quit] quit View mode, trying to restore window and buffer to previous state. \\[View-quit] is the normal way to leave view mode. \\[View-exit] exit View mode but stay in current buffer. Use this if you started viewing a buffer (file) and find out you want to edit it. \\[View-exit-and-edit] exit View mode and make the current buffer editable. \\[View-quit-all] quit View mode, trying to restore windows and buffer to previous state. \\[View-leave] quit View mode and maybe switch buffers, but don't kill this buffer. \\[View-kill-and-leave] quit View mode, kill current buffer and go back to other buffer. The effect of \\[View-leave] , \\[View-quit] and \\[View-kill-and-leave] depends on how view-mode was entered. If it was entered by view-file, view-file-other-window or view-file-other-frame (\\[view-file], \\[view-file-other-window], \\[view-file-other-frame] or the dired mode v command), then \\[View-quit] will try to kill the current buffer. If view-mode was entered from another buffer as is done by View-buffer, View-buffer-other-window, View-buffer-other frame, View-file, View-file-other-window or View-file-other-frame then \\[view-leave] , \\[view-quit] and \\[view-kill-and-leave] will return to that buffer. Entry to view-mode runs the normal hook `view-mode-hook'." (interactive "P") (cond ((and arg (if (> (prefix-numeric-value arg) 0) view-mode (not view-mode))) ()) ; Do nothing if already OK. (view-mode (view-mode-disable)) (t (view-mode-enable)))) (defun view-mode-enable () "Turn on View mode." (setq view-mode t view-page-size (view-page-size-default view-page-size) view-half-page-size (or view-half-page-size (/ (view-window-size) 2)) view-old-buffer-read-only buffer-read-only buffer-read-only t view-old-Helper-return-blurb (and (boundp 'Helper-return-blurb) Helper-return-blurb) Helper-return-blurb (format "continue viewing %s" (if (buffer-file-name) (file-name-nondirectory (buffer-file-name)) (buffer-name)))) (run-hooks 'view-mode-hook)) (defun view-mode-disable () "Turn off View mode." (and view-overlay (delete-overlay view-overlay)) (setq view-mode nil Helper-return-blurb view-old-Helper-return-blurb buffer-read-only view-old-buffer-read-only)) ;;;###autoload (defun view-mode-enter (&optional return-to exit-action) "\ Enter View mode and set up exit from view mode depending on optional arguments. If RETURN-TO is non-nil it is added as an element to the buffer local alist view-return-to-alist. Save EXIT-ACTION in buffer local variable `view-exit-action'. It should be either nil or a function that takes a buffer as argument. This function will called by `view-mode-exit'. RETURN-TO is either nil, meaning do nothing when exiting view mode, or \(WINDOW OLD-WINDOW . OLD-BUF-INFO). WINDOW is a window used for viewing. OLD-WINDOW is nil or the window to select after viewing. OLD-BUF-INFO tells what to do with WINDOW when exiting. It is one of: 1) nil Do nothing. 2) t Delete WINDOW or, if it is the only window, its frame. 3) (OLD-BUFF START POINT) Display buffer OLD-BUFF with displayed text starting at START and point at POINT in WINDOW. See the function `view-mode' for the commands of View mode. This function runs the normal hook `view-mode-hook'." (if return-to (let ((entry (assq (car return-to) view-return-to-alist))) (if entry (setcdr entry (cdr return-to)) (setq view-return-to-alist (cons return-to view-return-to-alist))))) (if view-mode ; Do nothing if already in view mode. nil (setq view-exit-action exit-action) (view-mode-enable) (force-mode-line-update) (message "%s" (substitute-command-keys "\ Type \\[help-command] for help, \\[describe-mode] for commands, \\[View-quit] to quit.")))) (defun view-mode-exit (&optional return-to-alist exit-action all-win) "Exit view-mode in various ways, depending on optional arguments. RETURN-TO-ALIST, EXIT-ACTION and ALL-WIN determine what to do after exit. EXIT-ACTION is nil or a function that is called with current buffer as argument. RETURN-TO-ALIST is an alist that for some of the windows displaying the current buffer, associate information on what to do with those windows. If ALL-WIN is non-nil, then all windows on RETURN-TO-ALIST are restored to their old state. If ALL-WIN is nil, then only the selected window is affected (if it is on ALL-WIN). Each element has the format (WINDOW OLD-WINDOW . OLD-BUF-INFO) where WINDOW is a window displaying the current buffer and OLD-BUF-INFO is information on what to do with WINDOW. OLD-BUF-INFO is one of: 1) nil Do nothing. 2) t Delete WINDOW or, if it is the only window, its frame. 3) (OLD-BUF START POINT) Display buffer OLD-BUF with displayed text starting at START and point at POINT in WINDOW. If one of the WINDOW in RETURN-TO-ALIST is the selected window and the corresponding OLD-WINDOW is a live window, then select OLD-WINDOW." (if view-mode ; Only do something if in view mode. (let* ((buffer (current-buffer)) window (sel-old (assq (selected-window) return-to-alist)) (old-window (or (and sel-old (car (cdr sel-old))) (and all-win (selected-window)))) (alist (if (setq all-win (or all-win view-exit-all-windows-at-exit)) return-to-alist ; Try to restore all windows. (and sel-old (list sel-old))))) ; Only selected window. (view-mode-disable) (setq view-exit-action nil view-return-to-alist nil) (while alist ; Restore windows with info. (if (and (window-live-p (setq window (car (car alist)))) (eq buffer (window-buffer window))) (let ((frame (window-frame window)) (old-buf-info (cdr (cdr (car alist))))) (if all-win (select-window window)) (cond ((and (consp old-buf-info) ; Case 3. (buffer-live-p (car old-buf-info))) (set-window-buffer window (car old-buf-info)) ; old-buf (set-window-start window (car (cdr old-buf-info))) (set-window-point window (car (cdr (cdr old-buf-info))))) ((not (eq old-buf-info t)) nil) ; Not case 2, do nothing. ((not (one-window-p t)) (delete-window)) ((not (eq frame (next-frame))) ; Not the only frame, so (if view-remove-frame-by-deleting (delete-frame frame) (iconify-frame frame)))))) ; can safely be removed. (setq alist (cdr alist))) (if (and return-to-alist view-exit-all-windows-at-exit) (replace-buffer-in-windows buffer)) (if (window-live-p old-window) ; still existing window (select-window old-window)) (if (and exit-action (not (get-buffer-window buffer))) (funcall exit-action buffer)) (force-mode-line-update)))) (defun View-exit () "Exit View mode but stay in current buffer." (interactive) (view-mode-exit)) (defun View-exit-and-edit () "Exit View mode and make the current buffer editable." (interactive) (view-mode-exit) (setq buffer-read-only nil)) (defun View-leave () "Quit View mode and maybe switch buffers, but don't kill this buffer." (interactive) (view-mode-exit view-return-to-alist)) (defun View-quit () "Quit View mode, trying to restore window and buffer to previous state. Maybe kill this buffer. Try to restore selected window to previous state and go to previous buffer or window." (interactive) (view-mode-exit view-return-to-alist view-exit-action)) (defun View-quit-all () "Quit View mode, trying to restore windows and buffers to previous state. Maybe kill current buffer. Try to restore all windows viewing buffer to previous state and go to previous buffer or window." (interactive) (view-mode-exit view-return-to-alist view-exit-action t)) (defun View-kill-and-leave () "Quit View mode, kill current buffer and return to previous buffer." (interactive) (view-mode-exit view-return-to-alist (or view-exit-action 'kill-buffer) t)) ;;; Some help routines. (defun view-window-size () ;; Window height excluding mode line. (1- (window-height))) ;(defun view-last-command (&optional who what) ; (setq view-last-command-entry this-command) ; (setq view-last-command who) ; (setq view-last-command-argument what)) ;(defun View-repeat-last-command () ; "Repeat last command issued in View mode." ; (interactive) ; (if (and view-last-command ; (eq view-last-command-entry last-command)) ; (funcall view-last-command view-last-command-argument)) ; (setq this-command view-last-command-entry)) (defun view-recenter () ;; Center point in window. (recenter (/ (view-window-size) 2))) (defun view-page-size-default (lines) ;; Get page size. (let ((default (- (view-window-size) next-screen-context-lines))) (if (or (null lines) (zerop (setq lines (prefix-numeric-value lines)))) default (min (abs lines) default)))) (defun view-set-half-page-size-default (lines) ;; Get and maybe set half page size. (if (not lines) view-half-page-size (setq view-half-page-size (if (zerop (setq lines (prefix-numeric-value lines))) (/ (view-window-size) 2) (view-page-size-default lines))))) ;;; Commands for moving around in the buffer. (defun View-goto-percent (&optional percent) "Move to end (or prefix PERCENT) of buffer in View mode. Display is centered at point. Also set the mark at the position where point was." (interactive "P") (push-mark) (goto-char (if percent (+ (point-min) (floor (* (- (point-max) (point-min)) 0.01 (max 0 (min 100 (prefix-numeric-value percent)))))) (point-max))) (view-recenter)) ;(defun View-goto-line-last (&optional line) ;"Move to last (or prefix LINE) line in View mode. ;Display is centered at LINE. ;Sets mark at starting position and pushes mark ring." ; (interactive "P") ; (push-mark) ; (if line (goto-line (prefix-numeric-value line)) ; (goto-char (point-max)) ; (beginning-of-line)) ; (view-recenter)) (defun View-goto-line (&optional line) "Move to first (or prefix LINE) line in View mode. Display is centered at LINE. Also set the mark at the position where point was." (interactive "p") (push-mark) (goto-line line) (view-recenter)) (defun View-scroll-to-buffer-end () "Scroll backward or forward so that buffer end is at last line of window." (interactive) (let ((p (if (pos-visible-in-window-p (point-max)) (point)))) (goto-char (point-max)) (recenter -1) (and p (goto-char p)))) (defun view-scroll-lines (lines backward default maxdefault) ;; This function does the job for all the scrolling commands. ;; Scroll forward LINES lines. If BACKWARD is true scroll backwards. ;; If LINES is negative scroll in the other direction. If LINES is 0 or nil, ;; scroll DEFAULT lines. If MAXDEFAULT is true then scroll no more than a ;; window full. (if (or (null lines) (zerop (setq lines (prefix-numeric-value lines)))) (setq lines default)) (if (< lines 0) (progn (setq backward (not backward)) (setq lines (- lines)))) (setq default (view-page-size-default nil)) ; Max scrolled at a time. (if maxdefault (setq lines (min lines default))) (cond (backward (scroll-down lines)) ((view-really-at-end) (if view-scroll-auto-exit (View-quit) (ding) (view-end-message))) (t (while (> lines default) (scroll-up default) (setq lines (- lines default)) (if (view-really-at-end) (setq lines 0))) (scroll-up lines) (if (view-really-at-end) (view-end-message)) (move-to-window-line -1) (beginning-of-line)))) (defun view-really-at-end () ;; Return true if buffer end visible. Maybe revert buffer and test. (and (pos-visible-in-window-p (point-max)) (let ((buf (current-buffer)) (bufname (buffer-name)) (file (buffer-file-name))) (or (not view-try-extend-at-buffer-end) (not file) (verify-visited-file-modtime buf) (not (file-exists-p file)) (and (buffer-modified-p buf) (setq file (file-name-nondirectory file)) (not (yes-or-no-p (format "File %s changed on disk. Discard your edits%s? " file (if (string= bufname file) "" (concat " in " bufname)))))) (progn (revert-buffer t t t) (pos-visible-in-window-p (point-max))))))) (defun view-end-message () ;; Tell that we are at end of buffer. (goto-char (point-max)) (message "End of buffer. Type %s to quit viewing." (substitute-command-keys (if view-scroll-auto-exit "\\[View-scroll-page-forward]" "\\[View-quit]")))) (defun View-scroll-page-forward (&optional lines) "Scroll \"page size\" or prefix LINES lines forward in View mode. Exit if end of text is visible and `view-scroll-auto-exit' is non-nil. \"page size\" is whole window full, or number of lines set by \\[View-scroll-page-forward-set-page-size] or \\[View-scroll-page-backward-set-page-size]. If LINES is more than a window-full, only the last window-full is shown." (interactive "P") (view-scroll-lines lines nil view-page-size nil)) (defun View-scroll-page-backward (&optional lines) "Scroll \"page size\" or prefix LINES lines backward in View mode. See also `View-scroll-page-forward'." (interactive "P") (view-scroll-lines lines t view-page-size nil)) (defun View-scroll-page-forward-set-page-size (&optional lines) "Scroll forward LINES lines in View mode, setting the \"page size\". This is the number of lines which \\[View-scroll-page-forward] and \\[View-scroll-page-backward] scroll by default. If LINES is omitted or = 0, sets \"page size\" to window height and scrolls forward that much, otherwise scrolls forward LINES lines and sets \"page size\" to the minimum of window height and the absolute value of LINES. See also `View-scroll-page-forward'." (interactive "P") (view-scroll-lines lines nil (setq view-page-size (view-page-size-default lines)) nil)) (defun View-scroll-page-backward-set-page-size (&optional lines) "Scroll backward prefix LINES lines in View mode, setting the \"page size\". See also `View-scroll-page-forward-set-page-size'." (interactive "P") (view-scroll-lines lines t (setq view-page-size (view-page-size-default lines)) nil)) (defun View-scroll-line-forward (&optional lines) "Scroll forward one line (or prefix LINES lines) in View mode. See also `View-scroll-page-forward,' but note that scrolling is limited to minimum of LINES and one window-full." (interactive "P") (view-scroll-lines lines nil 1 t)) (defun View-scroll-line-backward (&optional lines) "Scroll backward one line (or prefix LINES lines) in View mode. See also `View-scroll-line-forward'." (interactive "P") (view-scroll-lines lines t 1 t)) (defun View-scroll-half-page-forward (&optional lines) "Scroll forward a \"half page\" (or prefix LINES) lines in View mode. If LINES is not omitted, the \"half page size\" is set to the minimum of window height and the absolute value of LINES. LINES=0 resets \"half page size\" to half window height." (interactive "P") (view-scroll-lines lines nil (view-set-half-page-size-default lines) t)) (defun View-scroll-half-page-backward (&optional lines) "Scroll backward a \"half page\" (or prefix LINES) lines in View mode. See also `View-scroll-half-page-forward'." (interactive "P") (view-scroll-lines lines t (view-set-half-page-size-default lines) t)) (defun View-revert-buffer-scroll-page-forward (&optional lines) "Scroll forward, reverting buffer if needed, in View mode. If buffer has not been changed and the corresponding file is newer, first revert the buffer, then scroll. This command is useful if you are viewing a changing file. The prefix argument LINES says how many lines to scroll. If you don't specify a prefix argument, it uses the number of lines set by \\[View-scroll-page-forward-set-page-size] or \\[View-scroll-page-backward-set-page-size]. If LINES is more than a window-full, only the last window-full is shown." (interactive "P") (let ((view-mode-auto-exit nil) (view-try-extend-at-buffer-end t)) (view-scroll-lines lines nil view-page-size nil))) (defun View-back-to-mark (&optional ignore) "Return to last mark set in View mode, else beginning of file. Display that line at the center of the window. This command pops the mark ring, so that successive invocations return to earlier marks." (interactive) (goto-char (or (mark t) (point-min))) (pop-mark) (view-recenter)) (defun View-search-regexp-forward (n regexp) "Search forward for first (or prefix Nth) occurrence of REGEXP in View mode. Displays line found at center of window. REGEXP is remembered for searching with \\[View-search-last-regexp-forward] and \\[View-search-last-regexp-backward]. Sets mark at starting position and pushes mark ring. Characters @ or ! or combined as @! or !@ are special if entered at the beginning of REGEXP. They modify the search rather than become part of pattern searched for. @ means start search at the beginning of buffer. ! means search for line that not contains match for pattern. If REGEXP only consist of these control characters, then an earlier remembered REGEXP is used. The variable `view-highlight-face' controls the face that is used for highlighting the match that is found." (interactive "p\nsSearch forward (regexp): ") (view-search n regexp)) (defun View-search-regexp-backward (n regexp) "Search backward for first (or prefix Nth) occurrence of REGEXP in View mode. Displays line found at center of window. REGEXP is remembered for searching with \\[View-search-last-regexp-forward] and \\[View-search-last-regexp-backward]. Sets mark at starting position and pushes mark ring. Characters @ or ! or combined as @! or !@ are special if entered at the beginning of REGEXP. They modify the search rather than become part of pattern searched for. @ means start search at the end of buffer. ! means search for line that not contains match for pattern. If REGEXP only consist of these control characters, then an earlier remembered REGEXP is used. The variable `view-highlight-face' controls the face that is used for highlighting the match that is found." (interactive "p\nsSearch backward (regexp): ") (view-search (- n) regexp)) (defun View-search-last-regexp-forward (n) "\ Search forward for first (or prefix Nth) instance of last regexp in View mode. Displays line found at center of window. Sets mark at starting position and pushes mark ring. The variable `view-highlight-face' controls the face that is used for highlighting the match that is found." (interactive "p") (view-search n nil)) (defun View-search-last-regexp-backward (n) "\ Search backward for first (or prefix Nth) instance of last regexp in View mode. Displays line found at center of window. Sets mark at starting position and pushes mark ring. The variable `view-highlight-face' controls the face that is used for highlighting the match that is found." (interactive "p") (view-search (- n) nil)) (defun view-search (times regexp) ;; This function does the job for all the view-search commands. (let (where no end ln) (cond ((and regexp (> (length regexp) 0) (or (not (memq (string-to-char regexp) '(?! ?@))) (progn (if (member (substring regexp 0 2) '("!@" "@!")) (setq end t no t ln 2) (setq no (not (setq end (eq ?@ (string-to-char regexp)))) ln 1)) (> (length (setq regexp (substring regexp ln))) 0)))) (setq view-last-regexp (if no (list regexp) regexp))) ((consp view-last-regexp) (setq regexp (car view-last-regexp)) (if (not (setq no (not no))) (setq view-last-regexp regexp))) (view-last-regexp (setq regexp view-last-regexp) (if no (setq view-last-regexp (list regexp)))) (t (error "No previous View-mode search"))) (save-excursion (if end (goto-char (if (< times 0) (point-max) (point-min))) (move-to-window-line (if (< times 0) 0 -1))) (if (if no (view-search-no-match-lines times regexp) (re-search-forward regexp nil t times)) (setq where (point)))) (if where (progn (push-mark) (goto-char where) (if view-overlay (move-overlay view-overlay (match-beginning 0) (match-end 0)) (setq view-overlay (make-overlay (match-beginning 0) (match-end 0)))) (overlay-put view-overlay 'face view-highlight-face) (beginning-of-line) (view-recenter)) (message "Can't find occurrence %d of %s%s" times (if no "no " "") regexp) (sit-for 4)))) (defun view-search-no-match-lines (times regexp) ;; Search for the TIMESt occurrence of line with no match for REGEXP. (let ((back (and (< times 0) (setq times (- times)) -1)) n) (while (> times 0) (save-excursion (beginning-of-line (if back (- times) (1+ times))) (setq n (point))) (setq times (cond ((< (count-lines (point) n) times) -1) ; Not enough lines. ((or (null (re-search-forward regexp nil t back)) (if back (and (< (match-end 0) n) (> (count-lines (match-end 0) n) 1)) (and (< n (match-beginning 0)) (> (count-lines n (match-beginning 0)) 1)))) 0) ; No match within lines. (back (count-lines (max n (match-beginning 0)) (match-end 0))) (t (count-lines (match-beginning 0) (min n (match-end 0)))))) (goto-char n)) (and (zerop times) (looking-at "^.*$")))) (provide 'view) ;;; view.el ends here