Mercurial > emacs
view lisp/textmodes/fill.el @ 2800:a7b260d27c2c
(face-initialize): Don't create the `modeline' face.
Set region-face.
(invert-face): Really do use the default colors.
(x-initialize-frame-faces): Always try "gray" color for
primary-selection; always invert if that fails.
Similar changes for highlight, secondary-selection.
(make-face): Add interactive spec.
(set-default-font): Deleted.
author | Richard M. Stallman <rms@gnu.org> |
---|---|
date | Sat, 15 May 1993 19:53:44 +0000 |
parents | ef643dbb7d40 |
children | d00889d02f75 |
line wrap: on
line source
;;; fill.el --- fill commands for Emacs ;; Copyright (C) 1985, 1986, 1992 Free Software Foundation, Inc. ;; Keywords: wp ;; This file is part of GNU Emacs. ;; GNU Emacs is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; GNU Emacs is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with GNU Emacs; see the file COPYING. If not, write to ;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. ;;; Commentary: ;; All the commands for filling text. These are documented in the Emacs ;; manual. ;;; Code: (defconst fill-individual-varying-indent nil "*Controls criterion for a new paragraph in `fill-individual-paragraphs'. Non-nil means changing indent doesn't end a paragraph. That mode can handle paragraphs with extra indentation on the first line, but it requires separator lines between paragraphs. Nil means that any change in indentation starts a new paragraph.") (defun set-fill-prefix () "Set the fill-prefix to the current line up to point. Filling expects lines to start with the fill prefix and reinserts the fill prefix in each resulting line." (interactive) (setq fill-prefix (buffer-substring (save-excursion (beginning-of-line) (point)) (point))) (if (equal fill-prefix "") (setq fill-prefix nil)) (if fill-prefix (message "fill-prefix: \"%s\"" fill-prefix) (message "fill-prefix cancelled"))) (defconst adaptive-fill-mode t "*Non-nil means determine a paragraph's fill prefix from its text.") (defconst adaptive-fill-regexp "[ \t]*\\([>*] +\\)?" "*Regexp to match text at start of line that constitutes indentation. If Adaptive Fill mode is enabled, whatever text matches this pattern on the second line of a paragraph is used as the standard indentation for the paragraph.") (defun fill-region-as-paragraph (from to &optional justify-flag) "Fill region as one paragraph: break lines to fit fill-column. Prefix arg means justify too. From program, pass args FROM, TO and JUSTIFY-FLAG." (interactive "r\nP") ;; Arrange for undoing the fill to restore point. (if (and buffer-undo-list (not (eq buffer-undo-list t))) (setq buffer-undo-list (cons (point) buffer-undo-list))) ;; Don't let Adaptive Fill mode alter the fill prefix permanently. (let ((fill-prefix fill-prefix)) ;; Figure out how this paragraph is indented, if desired. (if (and adaptive-fill-mode (or (null fill-prefix) (string= fill-prefix ""))) (save-excursion (goto-char (min from to)) (if (eolp) (forward-line 1)) (forward-line 1) (if (< (point) (max from to)) (let ((start (point))) (re-search-forward adaptive-fill-regexp) (setq fill-prefix (buffer-substring start (point)))) (goto-char (min from to)) (if (eolp) (forward-line 1)) ;; If paragraph has only one line, don't assume ;; that additional lines would have the same starting ;; decoration. Assume no indentation. ;; (re-search-forward adaptive-fill-regexp) ;; (setq fill-prefix (make-string (current-column) ?\ )) ))) (save-restriction (narrow-to-region from to) (goto-char (point-min)) (skip-chars-forward "\n") (narrow-to-region (point) (point-max)) (setq from (point)) (goto-char (point-max)) (let ((fpre (and fill-prefix (not (equal fill-prefix "")) (regexp-quote fill-prefix)))) ;; Delete the fill prefix from every line except the first. ;; The first line may not even have a fill prefix. (and fpre (progn (if (>= (length fill-prefix) fill-column) (error "fill-prefix too long for specified width")) (goto-char (point-min)) (forward-line 1) (while (not (eobp)) (if (looking-at fpre) (delete-region (point) (match-end 0))) (forward-line 1)) (goto-char (point-min)) (and (looking-at fpre) (forward-char (length fill-prefix))) (setq from (point))))) ;; from is now before the text to fill, ;; but after any fill prefix on the first line. ;; Make sure sentences ending at end of line get an extra space. ;; loses on split abbrevs ("Mr.\nSmith") (goto-char from) (while (re-search-forward "[.?!][])}\"']*$" nil t) (insert ? )) ;; Then change all newlines to spaces. (subst-char-in-region from (point-max) ?\n ?\ ) ;; Flush excess spaces, except in the paragraph indentation. (goto-char from) (skip-chars-forward " \t") ;; nuke tabs while we're at it; they get screwed up in a fill ;; this is quick, but loses when a sole tab follows the end of a sentence. ;; actually, it is difficult to tell that from "Mr.\tSmith". ;; blame the typist. (subst-char-in-region (point) (point-max) ?\t ?\ ) (while (re-search-forward " *" nil t) (delete-region (+ (match-beginning 0) (if (save-excursion (skip-chars-backward " ]})\"'") (memq (preceding-char) '(?. ?? ?!))) 2 1)) (match-end 0))) (goto-char (point-max)) (delete-horizontal-space) (insert " ") (goto-char (point-min)) ;; This is the actual filling loop. (let ((prefixcol 0) linebeg) (while (not (eobp)) (setq linebeg (point)) (move-to-column (1+ fill-column)) (if (eobp) nil ;; Move back to start of word. (skip-chars-backward "^ \n" linebeg) ;; Don't break after a period followed by just one space. ;; Move back to the previous place to break. ;; The reason is that if a period ends up at the end of a line, ;; further fills will assume it ends a sentence. ;; If we now know it does not end a sentence, ;; avoid putting it at the end of the line. (while (and (> (point) (+ linebeg 2)) (eq (preceding-char) ?\ ) (eq (char-after (- (point) 2)) ?\.)) (forward-char -2) (skip-chars-backward "^ \n" linebeg)) (if (if (zerop prefixcol) (bolp) (>= prefixcol (current-column))) ;; Keep at least one word even if fill prefix exceeds margin. ;; This handles all but the first line of the paragraph. (progn (skip-chars-forward " ") (skip-chars-forward "^ \n")) ;; Normally, move back over the single space between the words. (forward-char -1))) (if (and fill-prefix (zerop prefixcol) (< (- (point) (point-min)) (length fill-prefix)) (string= (buffer-substring (point-min) (point)) (substring fill-prefix 0 (- (point) (point-min))))) ;; Keep at least one word even if fill prefix exceeds margin. ;; This handles the first line of the paragraph. (progn (skip-chars-forward " ") (skip-chars-forward "^ \n"))) ;; Replace all whitespace here with one newline. ;; Insert before deleting, so we don't forget which side of ;; the whitespace point or markers used to be on. (skip-chars-backward " ") (insert ?\n) (delete-horizontal-space) ;; Insert the fill prefix at start of each line. ;; Set prefixcol so whitespace in the prefix won't get lost. (and (not (eobp)) fill-prefix (not (equal fill-prefix "")) (progn (insert fill-prefix) (setq prefixcol (current-column)))) ;; Justify the line just ended, if desired. (and justify-flag (not (eobp)) (progn (forward-line -1) (justify-current-line) (forward-line 1)))))))) (defun fill-paragraph (arg) "Fill paragraph at or after point. Prefix arg means justify as well." (interactive "P") (let ((before (point))) (save-excursion (forward-paragraph) (or (bolp) (newline 1)) (let ((end (point)) (beg (progn (backward-paragraph) (point)))) (goto-char before) (fill-region-as-paragraph beg end arg))))) (defun fill-region (from to &optional justify-flag) "Fill each of the paragraphs in the region. Prefix arg (non-nil third arg, if called from program) means justify as well." (interactive "r\nP") (save-restriction (narrow-to-region from to) (goto-char (point-min)) (while (not (eobp)) (let ((initial (point)) (end (progn (forward-paragraph 1) (point)))) (forward-paragraph -1) (if (>= (point) initial) (fill-region-as-paragraph (point) end justify-flag) (goto-char end)))))) (defun justify-current-line () "Add spaces to line point is in, so it ends at `fill-column'." (interactive) (save-excursion (save-restriction (let (ncols beg indent) (beginning-of-line) (forward-char (length fill-prefix)) (skip-chars-forward " \t") (setq indent (current-column)) (setq beg (point)) (end-of-line) (narrow-to-region beg (point)) (goto-char beg) (while (re-search-forward " *" nil t) (delete-region (+ (match-beginning 0) (if (save-excursion (skip-chars-backward " ])\"'") (memq (preceding-char) '(?. ?? ?!))) 2 1)) (match-end 0))) (goto-char beg) (while (re-search-forward "[.?!][])\"']*\n" nil t) (forward-char -1) (insert ? )) (goto-char (point-max)) ;; Note that the buffer bounds start after the indentation, ;; so the columns counted by INDENT don't appear in (current-column). (setq ncols (- fill-column (current-column) indent)) (if (search-backward " " nil t) (while (> ncols 0) (let ((nmove (+ 3 (random 3)))) (while (> nmove 0) (or (search-backward " " nil t) (progn (goto-char (point-max)) (search-backward " "))) (skip-chars-backward " ") (setq nmove (1- nmove)))) (insert " ") (skip-chars-backward " ") (setq ncols (1- ncols))))))) nil) (defun fill-nonuniform-paragraphs (min max &optional justifyp mailp) "Fill paragraphs within the region, allowing varying indentation within each. This command divides the region into \"paragraphs\", only at paragraph-separator lines, then fills each paragraph using as the fill prefix the smallest indentation of any line in the paragraph. When calling from a program, pass range to fill as first two arguments. Optional third and fourth arguments JUSTIFY-FLAG and MAIL-FLAG: JUSTIFY-FLAG to justify paragraphs (prefix arg), MAIL-FLAG for a mail message, i. e. don't fill header lines." (interactive "r\nP") (let ((fill-individual-varying-indent t)) (fill-individual-paragraphs min max justifyp mailp))) (defun fill-individual-paragraphs (min max &optional justifyp mailp) "Fill paragraphs of uniform indentation within the region. This command divides the region into \"paragraphs\", treating every change in indentation level as a paragraph boundary, then fills each paragraph using its indentation level as the fill prefix. When calling from a program, pass range to fill as first two arguments. Optional third and fourth arguments JUSTIFY-FLAG and MAIL-FLAG: JUSTIFY-FLAG to justify paragraphs (prefix arg), MAIL-FLAG for a mail message, i. e. don't fill header lines." (interactive "r\nP") (save-restriction (save-excursion (goto-char min) (beginning-of-line) (if mailp (while (or (looking-at "[ \t]*[^ \t\n]*:") (looking-at "[ \t]*$")) (search-forward "\n\n" nil 'move))) (narrow-to-region (point) max) ;; Loop over paragraphs. (while (progn (skip-chars-forward " \t\n") (not (eobp))) (beginning-of-line) (let ((start (point)) fill-prefix fill-prefix-regexp) ;; Find end of paragraph, and compute the smallest fill-prefix ;; that fits all the lines in this paragraph. (while (progn ;; Update the fill-prefix on the first line ;; and whenever the prefix good so far is too long. (if (not (and fill-prefix (looking-at fill-prefix-regexp))) (setq fill-prefix (buffer-substring (point) (save-excursion (skip-chars-forward " \t") (point))) fill-prefix-regexp (regexp-quote fill-prefix))) (forward-line 1) ;; Now stop the loop if end of paragraph. (and (not (eobp)) (if fill-individual-varying-indent ;; If this line is a separator line, with or ;; without prefix, end the paragraph. (and (not (looking-at paragraph-separate)) (save-excursion (not (and (looking-at fill-prefix-regexp) (progn (forward-char (length fill-prefix)) (looking-at paragraph-separate)))))) ;; If this line has more or less indent ;; than the fill prefix wants, end the paragraph. (and (looking-at fill-prefix-regexp) (save-excursion (not (progn (forward-char (length fill-prefix)) (or (looking-at paragraph-separate) (looking-at paragraph-start)))))))))) ;; Fill this paragraph, but don't add a newline at the end. (let ((had-newline (bolp))) (fill-region-as-paragraph start (point) justifyp) (or had-newline (delete-char -1)))))))) ;;; fill.el ends here