view lisp/progmodes/asm-mode.el @ 29005:b396df3a5181

(ONE_MORE_BYTE, TWO_MORE_BYTES): Set coding->resutl to CODING_FINISH_INSUFFICIENT_SRC if there's not enough source. (ONE_MORE_CHAR, EMIT_CHAR, EMIT_ONE_BYTE, EMIT_TWO_BYTE, EMIT_BYTES): New macros. (THREE_MORE_BYTES, DECODE_CHARACTER_ASCII, DECODE_CHARACTER_DIMENSION1, DECODE_CHARACTER_DIMENSION2): These macros deleted. (CHECK_CODE_RANGE_A0_FF): This macro deleted. (detect_coding_emacs_mule): Use UNIBYTE_STR_AS_MULTIBYTE_P to check the validity of multibyte sequence. (decode_coding_emacs_mule): New function. (encode_coding_emacs_mule): New macro. (detect_coding_iso2022): Use ONE_MORE_BYTE to fetch a byte from the source. (DECODE_ISO_CHARACTER): Just return a character code. (DECODE_COMPOSITION_START): Set coding->result instead of result. (decode_coding_iso2022, decode_coding_sjis_big5, decode_eol): Use EMIT_CHAR to produced decoded characters. Exit the loop only by macros ONE_MORE_BYTE or EMIT_CHAR. Don't handle the case of last block here. (ENCODE_ISO_CHARACTER): Don't translate character here. Produce only position codes for an invalid character. (encode_designation_at_bol): Return new destination pointer. 5th arg DSTP is changed to DST. (encode_coding_iso2022, decode_coding_sjis_big5): Get a character from the source by ONE_MORE_CHAR. Don't handle the case of last block here. (DECODE_SJIS_BIG5_CHARACTER, ENCODE_SJIS_BIG5_CHARACTER): These macros deleted. (detect_coding_sjis, detect_coding_big5, detect_coding_utf_8, detect_coding_utf_16, detect_coding_ccl): Use ONE_MORE_BYTE and TWO_MORE_BYTES to fetch a byte from the source. (encode_eol): Pay attention to coding->src_multibyte. (detect_coding, detect_eol): Preserve members src_multibyte and dst_multibyte. (DECODING_BUFFER_MAG): Return 2 even for coding_type_raw_text. (encoding_buffer_size): Set magnification to 3 for all coding systems that require encoding. (ccl_coding_driver): For decoding, be sure that the result is valid multibyte sequence. (decode_coding): Initialize coding->errors and coding->result. For emacs-mule, call decode_coding_emacs_mule. For no-conversion and raw-text, always call decode_eol. Handle the case of last block here. If not coding->dst_multibyte, convert the resulting sequence to unibyte. (encode_coding): Initialize coding->errors and coding->result. For emacs-mule, call encode_coding_emacs_mule. For no-conversion and raw-text, always call encode_eol. Handle the case of last block here. (shrink_decoding_region, shrink_encoding_region): Detect cases that we can't skip data more rigidly. (code_convert_region): Setup src_multibyte and dst_multibyte members of coding. For decoding, if the buffer is multibyte, convert the source sequence to unibyte in advance. For encoding, if the buffer is multibyte, convert the resulting sequence to multibyte afterward. (run_pre_post_conversion_on_str): New function. (code_convert_string): Deleted and divided into the following two. (decode_coding_string, encode_coding_string): New functions. (code_convert_string1, code_convert_string_norecord): Call one of above. (Fdecode_sjis_char, Fdecode_big5_char): Use MAKE_CHAR instead of MAKE_NON_ASCII_CHAR. (Fset_terminal_coding_system_internal, Fset_safe_terminal_coding_system_internal): Setup src_multibyte and dst_multibyte members. (init_coding_once): Initialize iso_code_class with new enum ISO_control_0 and ISO_control_1.

;;; asm-mode.el --- mode for editing assembler code

;; Copyright (C) 1991 Free Software Foundation, Inc.

;; Author: Eric S. Raymond <[e-mail]>
;; Maintainer: FSF
;; Keywords: tools, languages

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Commentary:

;; This mode was written by Eric S. Raymond <[e-mail]>,
;; inspired by an earlier asm-mode by Martin Neitzel.

;; This minor mode is based on text mode.  It defines a private abbrev table
;; that can be used to save abbrevs for assembler mnemonics.  It binds just
;; five keys:
;;
;;	TAB		tab to next tab stop
;;	:		outdent preceding label, tab to tab stop
;;	comment char	place or move comment
;;			asm-comment-char specifies which character this is;
;;			you can use a different character in different
;;			Asm mode buffers.
;;	C-j, C-m	newline and tab to tab stop
;;
;; Code is indented to the first tab stop level.

;; This mode runs two hooks:
;;   1) An asm-mode-set-comment-hook before the part of the initialization
;; depending on asm-comment-char, and
;;   2) an asm-mode-hook at the end of initialization.

;;; Code:

(defgroup asm nil
  "Mode for editing assembler code."
  :group 'languages)

(defcustom asm-comment-char ?\;
  "*The comment-start character assumed by Asm mode."
  :type 'character
  :group 'asm)

(defvar asm-mode-syntax-table nil
  "Syntax table used while in Asm mode.")

(defvar asm-mode-abbrev-table nil
  "Abbrev table used while in Asm mode.")
(define-abbrev-table 'asm-mode-abbrev-table ())

(defvar asm-mode-map nil
  "Keymap for Asm mode.")

(if asm-mode-map
    nil
  (setq asm-mode-map (make-sparse-keymap))
  ;; Note that the comment character isn't set up until asm-mode is called.
  (define-key asm-mode-map ":"		'asm-colon)
  (define-key asm-mode-map "\C-c;"      'comment-region)
  (define-key asm-mode-map "\C-i"	'tab-to-tab-stop)
  (define-key asm-mode-map "\C-j"	'asm-newline)
  (define-key asm-mode-map "\C-m"	'asm-newline)
  )

(defconst asm-font-lock-keywords
 '(("^\\(\\(\\sw\\|\\s_\\)+\\)\\>:?[ \t]*\\(\\sw+\\(\\.[lLwWbBsS]\\)?\\)?"
    (1 font-lock-function-name-face) (3 font-lock-keyword-face nil t))
   ("^\\s +\\(\\(\\sw\\|\\s_\\)+\\(\\.[lLwWbBsS]\\)?\\)" 1 font-lock-keyword-face))
 "Additional expressions to highlight in Assembler mode.")

(defvar asm-code-level-empty-comment-pattern nil)
(defvar asm-flush-left-empty-comment-pattern nil)
(defvar asm-inline-empty-comment-pattern nil)

;;;###autoload
(defun asm-mode ()
  "Major mode for editing typical assembler code.
Features a private abbrev table and the following bindings:

\\[asm-colon]\toutdent a preceding label, tab to next tab stop.
\\[tab-to-tab-stop]\ttab to next tab stop.
\\[asm-newline]\tnewline, then tab to next tab stop.
\\[asm-comment]\tsmart placement of assembler comments.

The character used for making comments is set by the variable
`asm-comment-char' (which defaults to `?\\;').

Alternatively, you may set this variable in `asm-mode-set-comment-hook',
which is called near the beginning of mode initialization.

Turning on Asm mode runs the hook `asm-mode-hook' at the end of initialization.

Special commands:
\\{asm-mode-map}
"
  (interactive)
  (kill-all-local-variables)
  (setq mode-name "Assembler")
  (setq major-mode 'asm-mode)
  (setq local-abbrev-table asm-mode-abbrev-table)
  (make-local-variable 'font-lock-defaults)
  (setq font-lock-defaults '(asm-font-lock-keywords))
  (make-local-variable 'asm-mode-syntax-table)
  (setq asm-mode-syntax-table (make-syntax-table))
  (set-syntax-table asm-mode-syntax-table)

  (run-hooks 'asm-mode-set-comment-hook)
  ;; Make our own local child of asm-mode-map
  ;; so we can define our own comment character.
  (use-local-map (nconc (make-sparse-keymap) asm-mode-map))
  (local-set-key (vector asm-comment-char) 'asm-comment)

  (modify-syntax-entry	asm-comment-char
			"<" asm-mode-syntax-table)
  (modify-syntax-entry	?\n
			 ">" asm-mode-syntax-table)
  (let ((cs (regexp-quote (char-to-string asm-comment-char))))
    (make-local-variable 'comment-start)
    (setq comment-start (concat (char-to-string asm-comment-char) " "))
    (make-local-variable 'comment-start-skip)
    (setq comment-start-skip (concat cs "+[ \t]*"))
    (setq asm-inline-empty-comment-pattern (concat "^.+" cs "+ *$"))
    (setq asm-code-level-empty-comment-pattern (concat "^[\t ]+" cs cs " *$"))
    (setq asm-flush-left-empty-comment-pattern (concat "^" cs cs cs " *$"))
    )
  (make-local-variable 'comment-end)
  (setq comment-end "")
  (make-local-variable 'comment-column)
  (setq comment-column 32)
  (setq fill-prefix "\t")
  (run-hooks 'asm-mode-hook))

(defun asm-colon ()
  "Insert a colon; if it follows a label, delete the label's indentation."
  (interactive)
  (save-excursion
    (beginning-of-line)
    (if (looking-at "[ \t]+\\(\\sw\\|\\s_\\)+$")
	(delete-horizontal-space)))
  (insert ":")
  (tab-to-tab-stop)
  )

(defun asm-newline ()
  "Insert LFD + fill-prefix, to bring us back to code-indent level."
  (interactive)
  (if (eolp) (delete-horizontal-space))
  (insert "\n")
  (tab-to-tab-stop)
  )

(defun asm-line-matches (pattern &optional withcomment)
  (save-excursion
    (beginning-of-line)
    (looking-at pattern)))

(defun asm-pop-comment-level ()
  ;; Delete an empty comment ending current line.  Then set up for a new one,
  ;; on the current line if it was all comment, otherwise above it
  (end-of-line)
  (delete-horizontal-space)
  (while (= (preceding-char) asm-comment-char)
    (delete-backward-char 1))
  (delete-horizontal-space)
  (if (bolp)
      nil
    (beginning-of-line)
    (open-line 1))
  )


(defun asm-comment ()
  "Convert an empty comment to a `larger' kind, or start a new one.
These are the known comment classes:

   1 -- comment to the right of the code (at the comment-column)
   2 -- comment on its own line, indented like code
   3 -- comment on its own line, beginning at the left-most column.

Suggested usage:  while writing your code, trigger asm-comment
repeatedly until you are satisfied with the kind of comment."
  (interactive)
  (cond

   ;; Blank line?  Then start comment at code indent level.
   ((asm-line-matches "^[ \t]*$")
    (delete-horizontal-space)
    (tab-to-tab-stop)
    (insert asm-comment-char comment-start))

   ;; Nonblank line with no comment chars in it?
   ;; Then start a comment at the current comment column
   ((asm-line-matches (format "^[^%c\n]+$" asm-comment-char))
    (indent-for-comment))

   ;; Flush-left comment present?  Just insert character.
   ((asm-line-matches asm-flush-left-empty-comment-pattern)
    (insert asm-comment-char))

   ;; Empty code-level comment already present?
   ;; Then start flush-left comment, on line above if this one is nonempty. 
   ((asm-line-matches asm-code-level-empty-comment-pattern)
    (asm-pop-comment-level)
    (insert asm-comment-char asm-comment-char comment-start))

   ;; Empty comment ends line?
   ;; Then make code-level comment, on line above if this one is nonempty. 
   ((asm-line-matches asm-inline-empty-comment-pattern)
    (asm-pop-comment-level)
    (tab-to-tab-stop)
    (insert asm-comment-char comment-start))

   ;; If all else fails, insert character
   (t
    (insert asm-comment-char))

   )
  (end-of-line))

(provide 'asm-mode)

;;; asm-mode.el ends here