view lisp/saveplace.el @ 29005:b396df3a5181

(ONE_MORE_BYTE, TWO_MORE_BYTES): Set coding->resutl to CODING_FINISH_INSUFFICIENT_SRC if there's not enough source. (ONE_MORE_CHAR, EMIT_CHAR, EMIT_ONE_BYTE, EMIT_TWO_BYTE, EMIT_BYTES): New macros. (THREE_MORE_BYTES, DECODE_CHARACTER_ASCII, DECODE_CHARACTER_DIMENSION1, DECODE_CHARACTER_DIMENSION2): These macros deleted. (CHECK_CODE_RANGE_A0_FF): This macro deleted. (detect_coding_emacs_mule): Use UNIBYTE_STR_AS_MULTIBYTE_P to check the validity of multibyte sequence. (decode_coding_emacs_mule): New function. (encode_coding_emacs_mule): New macro. (detect_coding_iso2022): Use ONE_MORE_BYTE to fetch a byte from the source. (DECODE_ISO_CHARACTER): Just return a character code. (DECODE_COMPOSITION_START): Set coding->result instead of result. (decode_coding_iso2022, decode_coding_sjis_big5, decode_eol): Use EMIT_CHAR to produced decoded characters. Exit the loop only by macros ONE_MORE_BYTE or EMIT_CHAR. Don't handle the case of last block here. (ENCODE_ISO_CHARACTER): Don't translate character here. Produce only position codes for an invalid character. (encode_designation_at_bol): Return new destination pointer. 5th arg DSTP is changed to DST. (encode_coding_iso2022, decode_coding_sjis_big5): Get a character from the source by ONE_MORE_CHAR. Don't handle the case of last block here. (DECODE_SJIS_BIG5_CHARACTER, ENCODE_SJIS_BIG5_CHARACTER): These macros deleted. (detect_coding_sjis, detect_coding_big5, detect_coding_utf_8, detect_coding_utf_16, detect_coding_ccl): Use ONE_MORE_BYTE and TWO_MORE_BYTES to fetch a byte from the source. (encode_eol): Pay attention to coding->src_multibyte. (detect_coding, detect_eol): Preserve members src_multibyte and dst_multibyte. (DECODING_BUFFER_MAG): Return 2 even for coding_type_raw_text. (encoding_buffer_size): Set magnification to 3 for all coding systems that require encoding. (ccl_coding_driver): For decoding, be sure that the result is valid multibyte sequence. (decode_coding): Initialize coding->errors and coding->result. For emacs-mule, call decode_coding_emacs_mule. For no-conversion and raw-text, always call decode_eol. Handle the case of last block here. If not coding->dst_multibyte, convert the resulting sequence to unibyte. (encode_coding): Initialize coding->errors and coding->result. For emacs-mule, call encode_coding_emacs_mule. For no-conversion and raw-text, always call encode_eol. Handle the case of last block here. (shrink_decoding_region, shrink_encoding_region): Detect cases that we can't skip data more rigidly. (code_convert_region): Setup src_multibyte and dst_multibyte members of coding. For decoding, if the buffer is multibyte, convert the source sequence to unibyte in advance. For encoding, if the buffer is multibyte, convert the resulting sequence to multibyte afterward. (run_pre_post_conversion_on_str): New function. (code_convert_string): Deleted and divided into the following two. (decode_coding_string, encode_coding_string): New functions. (code_convert_string1, code_convert_string_norecord): Call one of above. (Fdecode_sjis_char, Fdecode_big5_char): Use MAKE_CHAR instead of MAKE_NON_ASCII_CHAR. (Fset_terminal_coding_system_internal, Fset_safe_terminal_coding_system_internal): Setup src_multibyte and dst_multibyte members. (init_coding_once): Initialize iso_code_class with new enum ISO_control_0 and ISO_control_1.

;;; saveplace.el --- automatically save place in files.

;; Copyright (C) 1993, 1994 Free Software Foundation, Inc.

;; Author: Karl Fogel <[e-mail]>
;; Maintainer: FSF
;; Created: July, 1993
;; Keywords: bookmarks, placeholders

;; This file is part of GNU Emacs.

;; GNU Emacs is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.

;; GNU Emacs is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GNU Emacs; see the file COPYING.  If not, write to the
;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
;; Boston, MA 02111-1307, USA.

;;; Commentary:

;; Automatically save place in files, so that visiting them later
;; (even during a different Emacs session) automatically moves point
;; to the saved position, when the file is first found.  Uses the
;; value of buffer-local variable save-place to determine whether to
;; save position or not.
;;
;; Thanks to Stefan Schoef, who sent a patch with the
;; `save-place-version-control' stuff in it.

;;; Code:

;; this is what I was using during testing:
;; (define-key ctl-x-map "p" 'toggle-save-place)

(defgroup save-place nil
  "Automatically save place in files."
  :group 'data)


(defvar save-place-alist nil
  "Alist of saved places to go back to when revisiting files.
Each element looks like (FILENAME . POSITION);
visiting file FILENAME goes automatically to position POSITION
rather than the beginning of the buffer.
This alist is saved between Emacs sessions.")

(defcustom save-place nil
  "*Non-nil means automatically save place in each file.
This means when you visit a file, point goes to the last place
where it was when you previously visited the same file.
This variable is automatically buffer-local.

If you wish your place in any file to always be automatically saved,
simply put this in your `~/.emacs' file:

\(setq-default save-place t\)"
  :type 'boolean
  :group 'save-place)

(make-variable-buffer-local 'save-place)

(defcustom save-place-file (convert-standard-filename "~/.emacs-places")
  "*Name of the file that records `save-place-alist' value."
  :type 'file
  :group 'save-place)

(defcustom save-place-version-control nil
  "*Controls whether to make numbered backups of master save-place file.
It can have four values: t, nil, `never', and `nospecial'.  The first
three have the same meaning that they do for the variable
`version-control', and the final value `nospecial' means just use the
value of `version-control'."
  :type '(radio (const :tag "Unconditionally" t)
		(const :tag "For VC Files" nil)
		(const never)
		(const :tag "Use value of `version-control'" nospecial))
  :group 'save-place)

(defvar save-place-loaded nil
  "Non-nil means that the `save-place-file' has been loaded.")

(defcustom save-place-limit nil
  "Maximum number of entries to retain in the list; nil means no limit."
  :type '(choice (integer :tag "Entries" :value 1)
		 (const :tag "No Limit" nil))
  :group 'save-place)

(defun toggle-save-place (&optional parg)
  "Toggle whether to save your place in this file between sessions.
If this mode is enabled, point is recorded when you kill the buffer
or exit Emacs.  Visiting this file again will go to that position,
even in a later Emacs session.

If called with a prefix arg, the mode is enabled if and only if
the argument is positive.

To save places automatically in all files, put this in your `.emacs' file:

\(setq-default save-place t\)"
  (interactive "P")
  (if (not buffer-file-name)
      (message "Buffer `%s' not visiting a file" (buffer-name))
    (if (and save-place (or (not parg) (<= parg 0)))
	(progn
	  (message "No place will be saved in this file")
	  (setq save-place nil))
      (message "Place will be saved")
      (setq save-place t))))

(defun save-place-to-alist ()
  ;; put filename and point in a cons box and then cons that onto the
  ;; front of the save-place-alist, if save-place is non-nil.
  ;; Otherwise, just delete that file from the alist.
  ;; first check to make sure alist has been loaded in from the master
  ;; file.  If not, do so, then feel free to modify the alist.  It
  ;; will be saved again when Emacs is killed.
  (or save-place-loaded (load-save-place-alist-from-file))
  (if buffer-file-name
      (progn
        (let ((cell (assoc buffer-file-name save-place-alist))
	      (position (if (not (eq major-mode 'hexl-mode))
			    (point)
			  (1+ (hexl-current-address)))))
          (if cell
              (setq save-place-alist (delq cell save-place-alist)))
	  (if (and save-place
		   (not (= position 1)))  ;; Optimize out the degenerate case.
	      (setq save-place-alist
		    (cons (cons buffer-file-name position)
			  save-place-alist)))))))

(defun save-place-alist-to-file ()
  (let ((file (expand-file-name save-place-file)))
    (save-excursion
      (message "Saving places to %s..." file)
      (set-buffer (get-buffer-create " *Saved Places*"))
      (delete-region (point-min) (point-max))
      (if (file-readable-p file)
          (insert-file-contents file))
      (delete-region (point-min) (point-max))
      (goto-char (point-min))
      (print save-place-alist (current-buffer))
      (let ((version-control
             (cond
              ((null save-place-version-control) nil)
              ((eq 'never save-place-version-control) 'never)
              ((eq 'nospecial save-place-version-control) version-control)
              (t
               t))))
        (write-file file)
        (kill-buffer (current-buffer))
        (message "Saving places to %s...done" file)))))

(defun load-save-place-alist-from-file ()
  (if (not save-place-loaded)
      (progn
        (setq save-place-loaded t)
        (let ((file (expand-file-name save-place-file)))
          ;; make sure that the alist does not get overwritten, and then
          ;; load it if it exists:
          (if (file-readable-p file)
              (save-excursion
                (message "Loading places from %s..." save-place-file)
                ;; don't want to use find-file because we have been
                ;; adding hooks to it.
                (set-buffer (get-buffer-create " *Saved Places*"))
                (delete-region (point-min) (point-max))
                (insert-file-contents file)
                (goto-char (point-min))
                (setq save-place-alist 
                      (car (read-from-string
                            (buffer-substring (point-min) (point-max)))))

                ;; If there is a limit, and we're over it, then we'll
                ;; have to truncate the end of the list:
                (if save-place-limit
                    (if (<= save-place-limit 0)
                        ;; Zero gets special cased.  I'm not thrilled
                        ;; with this, but the loop for >= 1 is tight.
                        (setq save-place-alist nil)
                      ;; Else the limit is >= 1, so enforce it by
                      ;; counting and then `setcdr'ing.
                      (let ((s save-place-alist)
                            (count 1))
                        (while s
                          (if (>= count save-place-limit)
                              (setcdr s nil)
                            (setq count (1+ count)))
                          (setq s (cdr s))))))
                  
                (kill-buffer (current-buffer))
                (message "Loading places from %s...done" file)))
          nil))))

(defun save-places-to-alist ()
  ;; go through buffer-list, saving places to alist if save-place is
  ;; non-nil, deleting them from alist if it is nil.
  (let ((buf-list (buffer-list)))
    (while buf-list
      ;; put this into a save-excursion in case someone is counting on
      ;; another function in kill-emacs-hook to act on the last buffer
      ;; they were in:
      (save-excursion
	(set-buffer (car buf-list))
	;; save-place checks buffer-file-name too, but we can avoid
	;; overhead of function call by checking here too.
	(and buffer-file-name (save-place-to-alist))
	(setq buf-list (cdr buf-list))))))

(defun save-place-find-file-hook ()
  (or save-place-loaded (load-save-place-alist-from-file))
  (let ((cell (assoc buffer-file-name save-place-alist)))
    (if cell
	(progn
	  (or after-find-file-from-revert-buffer
	      (goto-char (cdr cell)))
          ;; and make sure it will be saved again for later
          (setq save-place t)))))

(defun save-place-kill-emacs-hook ()
  ;; First update the alist.  This loads the old save-place-file if nec.
  (save-places-to-alist)
  ;; Now save the alist in the file, if we have ever loaded the file
  ;; (including just now).
  (if save-place-loaded
      (save-place-alist-to-file)))

(add-hook 'find-file-hooks 'save-place-find-file-hook t)

(add-hook 'kill-emacs-hook 'save-place-kill-emacs-hook)

(add-hook 'kill-buffer-hook 'save-place-to-alist)

(provide 'saveplace) ; why not...

;;; saveplace.el ends here