Mercurial > emacs
view doc/misc/Makefile.in @ 104888:b3fb8c98c899
(where_is_internal): Filter out shadowed remappings.
Assume that where_is_internal returns unshadowed bindings to simplify
the code and get rid of the gotos. Use ASIZE.
author | Stefan Monnier <monnier@iro.umontreal.ca> |
---|---|
date | Wed, 09 Sep 2009 02:38:50 +0000 |
parents | f52db8c1d1b5 |
children | 6104e7688824 |
line wrap: on
line source
#### Makefile for documentation other than the Emacs manual. # Copyright (C) 1994, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, # 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is part of GNU Emacs. # GNU Emacs is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. # Where to find the source code. $(srcdir) will be the man-aux # subdirectory of the source tree. This is # set by the configure script's `--srcdir' option. srcdir=@srcdir@ top_srcdir=@top_srcdir@ # Tell make where to find source files; this is needed for the makefiles. VPATH=@srcdir@ ## Where the output files go. ## Note that the setfilename command in the .texi files assumes this. infodir=../../info # The makeinfo program is part of the Texinfo distribution. # Use --force so that it generates output even if there are errors. MAKEINFO = makeinfo --force # Also add new entries to INFO_FILES in the top-level Makefile.in. INFO_TARGETS = \ $(infodir)/ada-mode \ $(infodir)/auth \ $(infodir)/autotype \ $(infodir)/calc \ $(infodir)/ccmode \ $(infodir)/cl \ $(infodir)/dbus \ $(infodir)/dired-x \ $(infodir)/ebrowse \ $(infodir)/ediff \ $(infodir)/emacs-mime \ $(infodir)/epa \ $(infodir)/erc \ $(infodir)/eshell \ $(infodir)/eudc \ $(infodir)/efaq \ $(infodir)/flymake \ $(infodir)/forms \ $(infodir)/gnus \ $(infodir)/idlwave \ $(infodir)/info \ $(infodir)/mairix-el \ $(infodir)/message \ $(infodir)/mh-e \ $(infodir)/newsticker \ $(infodir)/nxml-mode \ $(infodir)/org \ $(infodir)/pcl-cvs \ $(infodir)/pgg \ $(infodir)/rcirc \ $(infodir)/remember \ $(infodir)/reftex \ $(infodir)/sasl \ $(infodir)/sc \ $(infodir)/ses \ $(infodir)/sieve \ $(infodir)/smtpmail \ $(infodir)/speedbar \ $(infodir)/tramp \ $(infodir)/url \ $(infodir)/vip \ $(infodir)/viper \ $(infodir)/widget \ $(infodir)/woman DVI_TARGETS = \ ada-mode.dvi \ auth.dvi \ autotype.dvi \ calc.dvi \ cc-mode.dvi \ cl.dvi \ dbus.dvi \ dired-x.dvi \ ebrowse.dvi \ ediff.dvi \ emacs-mime.dvi \ epa.dvi \ erc.dvi \ eshell.dvi \ eudc.dvi \ faq.dvi \ flymake.dvi \ forms.dvi \ gnus.dvi \ idlwave.dvi \ info.dvi \ mairix-el.dvi \ message.dvi \ mh-e.dvi \ newsticker.dvi \ nxml-mode.dvi \ org.dvi \ pcl-cvs.dvi \ pgg.dvi \ rcirc.dvi \ reftex.dvi \ remember.dvi \ sasl.dvi \ sc.dvi \ ses.dvi \ sieve.dvi \ smtpmail.dvi \ speedbar.dvi \ tramp.dvi \ url.dvi \ vip.dvi \ viper.dvi \ widget.dvi \ woman.dvi TEXI2DVI = texi2dvi # The following rule does not work with all versions of `make'. .SUFFIXES: .texi .dvi .texi.dvi: $(TEXI2DVI) $< ENVADD = TEXINPUTS="$(srcdir):$(TEXINPUTS)" MAKEINFO="$(MAKEINFO) -I$(srcdir)" info: $(infodir) $(INFO_TARGETS) $(infodir): mkdir $@ dvi: $(DVI_TARGETS) # Note that all the Info targets build the Info files # in srcdir. There is no provision for Info files # to exist in the build directory. # In a distribution of Emacs, the Info files should be up to date. ## "short" target names for convenience, to just rebuild one manual. ada-mode : $(infodir)/ada-mode $(infodir)/ada-mode: ada-mode.texi cd $(srcdir); $(MAKEINFO) ada-mode.texi ada-mode.dvi: ada-mode.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/ada-mode.texi auth : $(infodir)/auth $(infodir)/auth: auth.texi cd $(srcdir); $(MAKEINFO) auth.texi auth.dvi: auth.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/auth.texi autotype : $(infodir)/autotype $(infodir)/autotype: autotype.texi cd $(srcdir); $(MAKEINFO) autotype.texi autotype.dvi: autotype.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/autotype.texi calc : $(infodir)/calc $(infodir)/calc: calc.texi cd $(srcdir); $(MAKEINFO) calc.texi calc.dvi: calc.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/calc.texi ccmode : $(infodir)/ccmode $(infodir)/ccmode: cc-mode.texi cd $(srcdir); $(MAKEINFO) cc-mode.texi cc-mode.dvi: cc-mode.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/cc-mode.texi cl : $(infodir)/cl $(infodir)/cl: cl.texi cd $(srcdir); $(MAKEINFO) cl.texi cl.dvi: cl.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/cl.texi dbus : $(infodir)/dbus $(infodir)/dbus: dbus.texi cd $(srcdir); $(MAKEINFO) dbus.texi dbus.dvi: dbus.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/dbus.texi dired-x : $(infodir)/dired-x $(infodir)/dired-x: dired-x.texi cd $(srcdir); $(MAKEINFO) dired-x.texi dired-x.dvi: dired-x.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/dired-x.texi ebrowse : $(infodir)/ebrowse $(infodir)/ebrowse: ebrowse.texi cd $(srcdir); $(MAKEINFO) ebrowse.texi ebrowse.dvi: ebrowse.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/ebrowse.texi ediff : $(infodir)/ediff $(infodir)/ediff: ediff.texi cd $(srcdir); $(MAKEINFO) ediff.texi ediff.dvi: ediff.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/ediff.texi emacs-mime : $(infodir)/emacs-mime $(infodir)/emacs-mime: emacs-mime.texi cd $(srcdir); $(MAKEINFO) --enable-encoding emacs-mime.texi emacs-mime.dvi: emacs-mime.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/emacs-mime.texi epa : $(infodir)/epa $(infodir)/epa: epa.texi cd $(srcdir); $(MAKEINFO) epa.texi epa.dvi: epa.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/epa.texi erc : $(infodir)/erc $(infodir)/erc: erc.texi cd $(srcdir); $(MAKEINFO) erc.texi erc.dvi: erc.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/erc.texi eshell : $(infodir)/eshell $(infodir)/eshell: eshell.texi cd $(srcdir); $(MAKEINFO) eshell.texi eshell.dvi: eshell.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/eshell.texi eudc : $(infodir)/eudc $(infodir)/eudc: eudc.texi cd $(srcdir); $(MAKEINFO) eudc.texi eudc.dvi: eudc.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/eudc.texi efaq : $(infodir)/efaq $(infodir)/efaq: faq.texi cd $(srcdir); $(MAKEINFO) faq.texi faq.dvi: faq.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/faq.texi flymake : $(infodir)/flymake $(infodir)/flymake: flymake.texi cd $(srcdir); $(MAKEINFO) flymake.texi flymake.dvi: flymake.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/flymake.texi forms : $(infodir)/forms $(infodir)/forms: forms.texi cd $(srcdir); $(MAKEINFO) forms.texi forms.dvi: forms.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/forms.texi # gnus/message/emacs-mime/sieve/pgg are part of Gnus: gnus : $(infodir)/gnus $(infodir)/gnus: gnus.texi gnus-faq.texi cd $(srcdir); $(MAKEINFO) gnus.texi gnus.dvi: gnus.texi gnus-faq.texi sed -e '/@iflatex/,/@end iflatex/d' ${srcdir}/gnus.texi > gnustmp.texi $(ENVADD) $(TEXI2DVI) gnustmp.texi cp gnustmp.dvi $*.dvi rm gnustmp.* # This is produced with --no-split to avoid making files whose # names clash on DOS 8+3 filesystems idlwave : $(infodir)/idlwave $(infodir)/idlwave: idlwave.texi cd $(srcdir); $(MAKEINFO) --no-split idlwave.texi idlwave.dvi: idlwave.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/idlwave.texi # The following target uses an explicit -o switch to work around # the @setfilename directive in info.texi, which is required for # the Texinfo distribution. ###info : $(infodir)/info # circular! $(infodir)/info: info.texi cd $(srcdir); $(MAKEINFO) --no-split info.texi -o $@ info.dvi: info.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/info.texi mairix-el : $(infodir)/mairix-el $(infodir)/mairix-el: mairix-el.texi cd $(srcdir); $(MAKEINFO) mairix-el.texi mairix-el.dvi: mairix-el.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/mairix-el.texi message : $(infodir)/message $(infodir)/message: message.texi cd $(srcdir); $(MAKEINFO) message.texi message.dvi: message.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/message.texi mh-e : $(infodir)/mh-e $(infodir)/mh-e: mh-e.texi cd $(srcdir); $(MAKEINFO) mh-e.texi mh-e.dvi: mh-e.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/mh-e.texi newsticker : $(infodir)/newsticker $(infodir)/newsticker: newsticker.texi cd $(srcdir); $(MAKEINFO) newsticker.texi newsticker.dvi: newsticker.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/newsticker.texi nxml-mode : $(infodir)/nxml-mode $(infodir)/nxml-mode: nxml-mode.texi cd $(srcdir); $(MAKEINFO) nxml-mode.texi nxml-mode.dvi: nxml-mode.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/nxml-mode.texi org : $(infodir)/org $(infodir)/org: org.texi cd $(srcdir); $(MAKEINFO) org.texi org.dvi: org.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/org.texi pcl-cvs : $(infodir)/pcl-cvs $(infodir)/pcl-cvs: pcl-cvs.texi cd $(srcdir); $(MAKEINFO) pcl-cvs.texi pcl-cvs.dvi: pcl-cvs.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/pcl-cvs.texi pgg : $(infodir)/pgg $(infodir)/pgg: pgg.texi cd $(srcdir); $(MAKEINFO) pgg.texi pgg.dvi: pgg.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/pgg.texi rcirc : $(infodir)/rcirc $(infodir)/rcirc: rcirc.texi cd $(srcdir); $(MAKEINFO) rcirc.texi rcirc.dvi: rcirc.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/rcirc.texi reftex : $(infodir)/reftex $(infodir)/reftex: reftex.texi cd $(srcdir); $(MAKEINFO) reftex.texi reftex.dvi: reftex.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/reftex.texi remember : $(infodir)/remember $(infodir)/remember: remember.texi cd $(srcdir); $(MAKEINFO) remember.texi remember.dvi: remember.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/remember.texi sasl : $(infodir)/sasl $(infodir)/sasl: sasl.texi cd $(srcdir); $(MAKEINFO) sasl.texi sasl.dvi: sasl.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/sasl.texi sc : $(infodir)/sc $(infodir)/sc: sc.texi cd $(srcdir); $(MAKEINFO) sc.texi sc.dvi: sc.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/sc.texi ses : $(infodir)/ses $(infodir)/ses: ses.texi cd $(srcdir); $(MAKEINFO) ses.texi ses.dvi: ses.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/ses.texi sieve : $(infodir)/sieve $(infodir)/sieve: sieve.texi cd $(srcdir); $(MAKEINFO) sieve.texi sieve.dvi: sieve.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/sieve.texi smtpmail : $(infodir)/smtpmail $(infodir)/smtpmail: smtpmail.texi cd $(srcdir); $(MAKEINFO) smtpmail.texi smtpmail.dvi: smtpmail.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/smtpmail.texi speedbar : $(infodir)/speedbar $(infodir)/speedbar: speedbar.texi cd $(srcdir); $(MAKEINFO) speedbar.texi speedbar.dvi: speedbar.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/speedbar.texi tramp : $(infodir)/tramp $(infodir)/tramp: tramp.texi trampver.texi cd $(srcdir); $(MAKEINFO) -D emacs tramp.texi tramp.dvi: tramp.texi trampver.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/tramp.texi url : $(infodir)/url $(infodir)/url: url.texi cd $(srcdir); $(MAKEINFO) url.texi url.dvi: url.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/url.texi vip : $(infodir)/vip $(infodir)/vip: vip.texi cd $(srcdir); $(MAKEINFO) vip.texi vip.dvi: vip.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/vip.texi viper : $(infodir)/viper $(infodir)/viper: viper.texi cd $(srcdir); $(MAKEINFO) viper.texi viper.dvi: viper.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/viper.texi widget : $(infodir)/widget $(infodir)/widget: widget.texi cd $(srcdir); $(MAKEINFO) widget.texi widget.dvi: widget.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/widget.texi woman : $(infodir)/woman $(infodir)/woman: woman.texi cd $(srcdir); $(MAKEINFO) woman.texi woman.dvi: woman.texi $(ENVADD) $(TEXI2DVI) ${srcdir}/woman.texi mostlyclean: rm -f *.log *.cp *.fn *.ky *.op *.ops *.pg *.vr core *.tp \ *.tps *.core gnustmp.* rm -f *.aux *.cps *.fns *.kys *.pgs *.vrs *.toc clean: mostlyclean rm -f *.dvi distclean: clean # rm -f Makefile maintainer-clean: distclean for file in $(INFO_TARGETS); do rm -f $${file}*; done ### Makefile ends here