Mercurial > emacs
view make-dist @ 98879:b4935ddbeb1e
*** empty log message ***
author | Eli Zaretskii <eliz@gnu.org> |
---|---|
date | Sun, 19 Oct 2008 12:29:22 +0000 |
parents | 9419b837e9c6 |
children | 38e7317321ea |
line wrap: on
line source
#!/bin/sh #### make-dist: create an Emacs distribution tar file from the current #### source tree. This basically creates a duplicate directory #### structure, and then hard links into it only those files that should #### be distributed. This means that if you add a file with an odd name, #### you should make sure that this script will include it. # Copyright (C) 1995, 1997, 1998, 2000, 2001, 2002, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # This file is part of GNU Emacs. # # GNU Emacs is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # GNU Emacs is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. progname="$0" ### Exit if a command fails. #set -e ### Print out each line we read, for debugging's sake. #set -v LANGUAGE=C LC_ALL=C LC_MESSAGES= LANG= export LANGUAGE LC_ALL LC_MESSAGES LANG ## Don't restrict access to any files. umask 0 update=yes check=yes clean_up=no make_tar=no newer="" while [ $# -gt 0 ]; do case "$1" in ## This option tells make-dist to delete the staging directory ## when done. It is useless to use this unless you make a tar file. "--clean-up" ) clean_up=yes ;; ## This option tells make-dist to make a tar file. "--tar" ) make_tar=yes ;; ## This option tells make-dist not to recompile or do analogous things. "--no-update" ) update=no ;; ## This option says don't check for bad file names, etc. "--no-check" ) check=no ;; ## This option tells make-dist to make the distribution normally, then ## remove all files older than the given timestamp file. This is useful ## for creating incremental or patch distributions. "--newer") newer="$2" new_extension=".new" shift ;; ## This option tells make-dist to use `compress' instead of gzip. ## Normally, make-dist uses gzip whenever it is present. "--compress") default_gzip="compress" ;; ## Same with bzip2. "--bzip2") default_gzip="bzip2" ;; ## Same with lzma. "--lzma") default_gzip="lzma" ;; "--snapshot") clean_up=yes make_tar=yes update=no check=no ;; "--help") echo "Usage: ${progname} [options]" echo "" echo " --bzip2 use bzip2 instead of gzip" echo " --clean-up delete staging directories when done" echo " --compress use compress instead of gzip" echo " --lzma use lzma instead of gzip" echo " --newer=TIME don't include files older than TIME" echo " --no-check don't check for bad file names etc." echo " --no-update don't recompile or do analogous things" echo " --snapshot same as --clean-up --no-update --tar --no-check" echo " --tar make a tar file" echo "" exit 0 ;; * ) echo "${progname}: Unrecognized argument: $1" >&2 exit 1 ;; esac shift done ### Make sure we're running in the right place. if [ ! -d src -o ! -f src/lisp.h -o ! -d lisp -o ! -f lisp/version.el ]; then echo "${progname}: Can't find \`src/lisp.h' and \`lisp/version.el'." >&2 echo "${progname} must be run in the top directory of the Emacs" >&2 echo "distribution tree. cd to that directory and try again." >&2 exit 1 fi ### Find where to run Emacs. ### (Accept only absolute file names.) if [ $update = yes ]; then unset EMACS_UNIBYTE if [ -f src/emacs ]; then EMACS=`pwd`/src/emacs else case $EMACS in /*) ;; *) if [ ! -f "$EMACS" ]; then echo "$0: You must set the EMACS environment variable " \ "to an absolute file name." 2>&1 exit 1 fi;; esac fi fi ### Find out which version of Emacs this is. shortversion=`grep 'defconst[ ]*emacs-version' lisp/version.el \ | sed -e 's/^.*"\([0-9][0-9]*\.[0-9][0-9]*\).*$/\1/'` version=`grep 'defconst[ ]*emacs-version' lisp/version.el \ | sed -e 's/^[^"]*"\([^"]*\)".*$/\1/'` if [ ! "${version}" ]; then echo "${progname}: can't find current Emacs version in \`./lisp/version.el'" >&2 exit 1 fi echo Version numbers are $version and $shortversion if [ $update = yes ]; then if grep -s "@set EMACSVER *${shortversion}" ./doc/emacs/emacs.texi > /dev/null; then true else echo "You must update the version number in \`./doc/emacs/emacs.texi'" sleep 5 fi fi ### Make sure we don't already have a directory emacs-${version}. emacsname="emacs-${version}${new_extension}" if [ -d ${emacsname} ] then echo Directory "${emacsname}" already exists >&2 exit 1 fi ### Make sure the subdirectory is available. tempparent="make-dist.tmp.$$" if [ -d ${tempparent} ]; then echo "${progname}: staging directory \`${tempparent}' already exists. Perhaps a previous invocation of \`${progname}' failed to clean up after itself. Check that directories whose names are of the form \`make-dist.tmp.NNNNN' don't contain any important information, remove them, and try again." >&2 exit 1 fi ### Find where to run Emacs. if [ $check = yes ]; then ### Check for .elc files with no corresponding .el file. ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \ leim/[a-z]*/[a-z]*.el | sed 's/\.el$/.elc/' > /tmp/el ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \ leim/[a-z]*/[a-z]*.elc > /tmp/elc bogosities="`comm -13 /tmp/el /tmp/elc`" if [ "${bogosities}" != "" ]; then echo "The following .elc files have no corresponding .el files:" echo "${bogosities}" fi rm -f /tmp/el /tmp/elc ### Check for .el files with no corresponding .elc file. ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \ leim/[a-z]*/[a-z]*.el > /tmp/el ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \ leim/[a-z]*/[a-z]*.elc | sed 's/\.elc$/.el/' > /tmp/elc losers="`comm -23 /tmp/el /tmp/elc`" bogosities= for file in $losers; do if ! grep -q "no-byte-compile: t" $file; then case $file in site-init.el | site-load.el | site-start.el | default.el) ;; *) bogosities="$file $bogosities" ;; esac fi done if [ x"${bogosities}" != x"" ]; then echo "The following .el files have no corresponding .elc files:" echo "${bogosities}" fi rm -f /tmp/el /tmp/elc fi ### Make sure configure is newer than configure.in. if [ "x`ls -t configure configure.in | sed q`" != "xconfigure" ]; then echo "\`./configure.in' is newer than \`./configure'" >&2 echo "Running autoconf" >&2 autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; } fi ### Make sure src/config-in.stamp is newer than configure.in. if [ "x`ls -t src/stamp-h.in configure.in | sed q`" != "xsrc/stamp-h.in" ]; then echo "\`./configure.in' is newer than \`./src/stamp-h.in'" >&2 echo "Running autoheader" >&2 autoheader || { x=$?; echo Autoheader FAILED! >&2; exit $x; } rm -f src/stamp-h.in echo timestamp > src/stamp-h.in fi if [ $update = yes ]; then echo "Updating Info files" (cd doc/emacs; make -f Makefile.in srcdir=. info) (cd doc/misc; make -f Makefile.in srcdir=. info) (cd doc/lispref; make -f Makefile.in srcdir=. info) (cd doc/lispintro; make -f Makefile.in SHELL=/bin/sh srcdir=. info VPATH=.) echo "Updating finder, custom and autoload data" (cd lisp; make updates EMACS="$EMACS") if test -f leim/leim-list.el; then echo "Updating leim-list.el" (cd leim; make leim-list.el EMACS="$EMACS") fi echo "Recompiling Lisp files" $EMACS -batch -f batch-byte-recompile-directory lisp leim fi echo "Making lisp/MANIFEST" (cd lisp; files=`echo [!=]*.el | sed -e 's/ subdirs.el / /' -e 's/ default.el / /'` for dir in [!=]*; do if [ -d $dir ] && [ $dir != term ] && [ $dir != CVS ] && [ $dir != RCS ] then echo $dir thisdir=`echo $dir/[!=]*.el | sed -e 's/ subdirs.el / /'` files="$files $thisdir" fi done for file in $files do sed -n 's/^;;; //p; q' $file done | sort > MANIFEST) echo "Creating staging directory: \`${tempparent}'" mkdir ${tempparent} tempdir="${tempparent}/${emacsname}" ### This trap ensures that the staging directory will be cleaned up even ### when the script is interrupted in mid-career. if [ "${clean_up}" = yes ]; then trap "echo 'Interrupted...cleaning up the staging directory'; rm -rf ${tempparent}; exit 1" 1 2 15 fi echo "Creating top directory: \`${tempdir}'" mkdir ${tempdir} ### We copy in the top-level files before creating the subdirectories in ### hopes that this will make the top-level files appear first in the ### tar file; this means that people can start reading the INSTALL and ### README while the rest of the tar file is still unpacking. Whoopee. echo "Making links to top-level files" ln INSTALL README BUGS move-if-change ${tempdir} ln ChangeLog Makefile.in configure configure.in ${tempdir} ln config.bat make-dist update-subdirs vpath.sed ${tempdir} ### Copy these files; they're cross-filesystem symlinks. cp mkinstalldirs ${tempdir} cp config.sub ${tempdir} cp config.guess ${tempdir} cp install-sh ${tempdir} echo "Updating version number in README" (cd ${tempdir} awk \ '$1 " " $2 " " $3 " " $4 " " $5 == "This directory tree holds version" { $6 = version; print $0 } $1 " " $2 " " $3 " " $4 " " $5 != "This directory tree holds version"' \ version=${version} README > tmp.README mv -f tmp.README README) echo "Creating subdirectories" for subdir in lisp site-lisp \ leim leim/CXTERM-DIC leim/MISC-DIC \ leim/SKK-DIC leim/ja-dic leim/quail \ src src/m src/s src/bitmaps lib-src oldXMenu lwlib \ nt nt/inc nt/inc/sys nt/inc/arpa nt/inc/netinet nt/icons \ etc etc/charsets etc/e etc/gnus etc/nxml \ etc/images etc/images/ezimage etc/images/gnus etc/images/gud \ etc/images/icons etc/images/icons/hicolor \ etc/images/icons/hicolor/*x* etc/images/icons/hicolor/scalable \ etc/images/icons/hicolor/*/apps etc/images/icons/hicolor/*/mimetypes \ etc/images/low-color etc/images/mail \ etc/images/smilies etc/images/smilies/grayscale \ etc/images/smilies/medium etc/images/tree-widget \ etc/images/tree-widget/default etc/images/tree-widget/folder \ etc/refcards etc/schema etc/tutorials info doc doc/emacs \ doc/misc doc/man doc/lispref doc/lispintro m4 msdos \ nextstep nextstep/Cocoa nextstep/Cocoa/Emacs.base \ nextstep/Cocoa/Emacs.base/Contents \ nextstep/Cocoa/Emacs.base/Contents/Resources \ nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj \ nextstep/Cocoa/Emacs.base/Contents/Resources/preferences.nib \ nextstep/Cocoa/Emacs.xcodeproj \ nextstep/GNUstep \ nextstep/GNUstep/Emacs.base \ nextstep/GNUstep/Emacs.base/Resources \ nextstep/GNUstep/Emacs.base/Resources/preferences.gorm do echo " ${tempdir}/${subdir}" mkdir ${tempdir}/${subdir} done echo "Making links to \`lisp' and its subdirectories" ### Don't distribute TAGS, =*.el files, site-init.el, site-load.el, or default.el. (cd lisp ln [a-zA-Z]*.el ../${tempdir}/lisp ln [a-zA-Z]*.elc ../${tempdir}/lisp ## simula.el doesn't keep abbreviations in simula.defns any more. ## ln [a-zA-Z]*.defns ../${tempdir}/lisp ln ChangeLog ChangeLog.*[0-9] ../${tempdir}/lisp ln Makefile.in makefile.w32-in ../${tempdir}/lisp test -f README && ln README ../${tempdir}/lisp (cd ../${tempdir}/lisp rm -f TAGS =* rm -f site-init site-init.el site-init.elc rm -f site-load site-load.el site-load.elc rm -f site-start site-start.el site-start.elc rm -f default default.el default.elc ) ## Find all subdirs of lisp dir for file in `find . -type d -print`; do case $file in . | .. | */Old | */CVS | */RCS | */=*) ;; *) if [ -d $file ]; then subdirs="$file $subdirs" fi ;; esac done for file in $subdirs; do echo " lisp/$file" mkdir -p ../${tempdir}/lisp/$file ln $file/[a-zA-Z0-9]*.el ../${tempdir}/lisp/$file ln $file/[a-zA-Z0-9]*.elc ../${tempdir}/lisp/$file for img in $file/[a-zA-Z]*.xpm $file/[a-zA-Z]*.xbm $file/[a-zA-Z]*.pbm; do if [ -f $img ]; then ln $img ../${tempdir}/lisp/$file fi done if [ -f $file/README ]; then ln $file/README ../${tempdir}/lisp/$file fi if [ -f $file/ChangeLog ]; then ln $file/ChangeLog ../${tempdir}/lisp/$file for f in $file/ChangeLog.*[0-9]; do if [ -f $f ]; then ln $f ../${tempdir}/lisp/$file fi done fi done ) echo "Making links to \`leim' and its subdirectories" ### Don't distribute TAGS, or =*.el files. (cd leim ln makefile.w32-in ../${tempdir}/leim ln ChangeLog README ../${tempdir}/leim ln CXTERM-DIC/*.tit ../${tempdir}/leim/CXTERM-DIC ln SKK-DIC/README SKK-DIC/SKK-JISYO.L ../${tempdir}/leim/SKK-DIC ln MISC-DIC/*.* ../${tempdir}/leim/MISC-DIC ln ja-dic/*.el ja-dic/*.elc ../${tempdir}/leim/ja-dic ln Makefile.in ../${tempdir}/leim/Makefile.in ln leim-ext.el ../${tempdir}/leim/leim-ext.el ## Lisp files that start with a capital are generated from TIT ## dictionaries so we don't distribute them. ln quail/[a-z]*.el quail/[a-z]*.elc ../${tempdir}/leim/quail rm -f ../${tempdir}/leim/quail/quick-b5.* rm -f ../${tempdir}/leim/quail/quick-cns.* rm -f ../${tempdir}/leim/quail/tsang-b5.* rm -f ../${tempdir}/leim/quail/tsang-cns.* cd ../${tempdir}/leim rm -f TAGS =* */=*) echo "Making links to \`src'" ### Don't distribute =*.[ch] files, or the configured versions of ### config.in, paths.in, or Makefile.in, or TAGS. (cd src echo " (It is ok if ln fails in some cases.)" ln [a-zA-Z]*.c ../${tempdir}/src ln [a-zA-Z]*.h ../${tempdir}/src ln [a-zA-Z]*.m ../${tempdir}/src ln [a-zA-Z]*.in ../${tempdir}/src ln [a-zA-Z]*.opt ../${tempdir}/src ## If we ended up with a symlink, or if we did not get anything ## due to a cross-device symlink, copy the file. for file in [a-zA-Z]*.[hcs] [a-zA-Z]*.in [a-zA-Z]*.opt; do if test -f ../${tempdir}/src/$file; then # test -f appears to succeed for a symlink if test -L ../${tempdir}/src/$file; then rm ../${tempdir}/src/$file cp -p $file ../${tempdir}/src chmod a-w ../${tempdir}/src/$file fi else rm ../${tempdir}/src/$file cp -p $file ../${tempdir}/src chmod a-w ../${tempdir}/src/$file fi done ln README ChangeLog ChangeLog.*[0-9] ../${tempdir}/src ln makefile.w32-in ../${tempdir}/src ln .gdbinit .dbxinit ../${tempdir}/src cd ../${tempdir}/src rm -f config.h epaths.h Makefile Makefile.c rm -f =* TAGS) echo "Making links to \`src/bitmaps'" (cd src/bitmaps ln README *.xbm ../../${tempdir}/src/bitmaps) echo "Making links to \`src/m'" (cd src/m # We call files for miscellaneous input (to linker etc) .inp. ln README [a-zA-Z0-9]*.h *.inp ../../${tempdir}/src/m) echo "Making links to \`src/s'" (cd src/s ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/s) echo "Making links to \`lib-src'" (cd lib-src ln [a-zA-Z]*.[chmy] ../${tempdir}/lib-src ln ChangeLog Makefile.in README testfile vcdiff ../${tempdir}/lib-src ln grep-changelog rcs2log rcs-checkin ../${tempdir}/lib-src ln makefile.w32-in ../${tempdir}/lib-src ## If we ended up with a symlink, or if we did not get anything ## due to a cross-device symlink, copy the file. for file in [a-zA-Z]*.[chy]; do if test -f ../${tempdir}/lib-src/$file; then # test -f appears to succeed for a symlink if test -L ../${tempdir}/lib-src/$file; then rm ../${tempdir}/lib-src/$file cp $file ../${tempdir}/lib-src chmod a-w ../${tempdir}/lib-src/$file fi else rm ../${tempdir}/lib-src/$file cp $file ../${tempdir}/lib-src chmod a-w ../${tempdir}/lib-src/$file fi done cd ../${tempdir}/lib-src rm -f Makefile.c rm -f getopt.h rm -f =* TAGS) echo "Making links to \`m4'" (cd m4 ln *.m4 ../${tempdir}/m4) echo "Making links to \`nt'" (cd nt ln emacs.manifest emacs.rc emacsclient.rc config.nt [a-z]*.c ../${tempdir}/nt ln nmake.defs gmake.defs subdirs.el ../${tempdir}/nt ln [a-z]*.bat [a-z]*.h ../${tempdir}/nt ln ChangeLog INSTALL README makefile.w32-in ../${tempdir}/nt) echo "Making links to \`nt/inc'" (cd nt/inc ln [a-z]*.h ../../${tempdir}/nt/inc) echo "Making links to \`nt/inc/sys'" (cd nt/inc/sys ln [a-z]*.h ../../../${tempdir}/nt/inc/sys) echo "Making links to \`nt/inc/arpa'" (cd nt/inc/arpa ln [a-z]*.h ../../../${tempdir}/nt/inc/arpa) echo "Making links to \`nt/inc/netinet'" (cd nt/inc/netinet ln [a-z]*.h ../../../${tempdir}/nt/inc/netinet) echo "Making links to \`nt/icons'" (cd nt/icons ln [a-z]*.ico ../../${tempdir}/nt/icons ln [a-z]*.cur ../../${tempdir}/nt/icons) echo "Making links to \`msdos'" (cd msdos ln ChangeLog emacs.ico emacs.pif ../${tempdir}/msdos ln is_exec.c sigaction.c mainmake mainmake.v2 sed*.inp ../${tempdir}/msdos cd ../${tempdir}/msdos rm -f =*) echo "Making links to \`nextstep'" (cd nextstep ln AUTHORS ChangeLog FOR-RELEASE README.txt compile ../${tempdir}/nextstep) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents'" (cd nextstep/Cocoa/Emacs.base/Contents ln Info.plist PkgInfo ../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents/Resources'" (cd nextstep/Cocoa/Emacs.base/Contents/Resources ln Credits.html Emacs.icns ../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj'" (cd nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj ln InfoPlist.strings ../../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources/English.lproj) echo "Making links to \`nextstep/Cocoa/Emacs.base/Contents/Resources/preferences.nib'" (cd nextstep/Cocoa/Emacs.base/Contents/Resources/preferences.nib ln *.nib ../../../../../../${tempdir}/nextstep/Cocoa/Emacs.base/Contents/Resources/preferences.nib) echo "Making links to \`nextstep/Cocoa/Emacs.xcodeproj'" (cd nextstep/Cocoa/Emacs.xcodeproj ln project.pbxproj ../../../${tempdir}/nextstep/Cocoa/Emacs.xcodeproj) echo "Making links to \`nextstep/GNUstep/Emacs.base/Resources'" (cd nextstep/GNUstep/Emacs.base/Resources ln Emacs.desktop Info-gnustep.plist emacs.tiff ../../../../${tempdir}/nextstep/GNUstep/Emacs.base/Resources ) echo "Making links to \`nextstep/GNUstep/Emacs.base/Resources/preferences.gorm'" (cd nextstep/GNUstep/Emacs.base/Resources/preferences.gorm ln data.classes data.info objects.gorm ../../../../../${tempdir}/nextstep/GNUstep/Emacs.base/Resources/preferences.gorm ) echo "Making links to \`oldXMenu'" (cd oldXMenu ln *.c *.h *.in ../${tempdir}/oldXMenu ln README ChangeLog ../${tempdir}/oldXMenu) echo "Making links to \`lwlib'" (cd lwlib ln *.c *.h *.in ../${tempdir}/lwlib ln README ChangeLog ../${tempdir}/lwlib) echo "Making links to \`etc'" ### Don't distribute = files, TAGS, DOC files, backups, autosaves, or ### tex litter. (cd etc files=`ls -d * | grep -v CVS | grep -v RCS | grep -v 'Old' | grep -v '^e$' \ | grep -v '^charsets$' | grep -v '^gnus$' | grep -v '^images$' | grep -v '^nxml$' \ | grep -v '^refcards$' | grep -v '^tutorials$'| grep -v '^schema$'` ln $files ../${tempdir}/etc ## If we ended up with a symlink, or if we did not get anything ## due to a cross-device symlink, copy the file. for file in $files; do if test -f ../${tempdir}/etc/$file; then # test -f appears to succeed for a symlink if test -L ../${tempdir}/etc/$file; then rm ../${tempdir}/etc/$file cp $file ../${tempdir}/etc chmod a-w ../${tempdir}/etc/$file fi else rm ../${tempdir}/etc/$file cp $file ../${tempdir}/etc chmod a-w ../${tempdir}/etc/$file fi done cd ../${tempdir}/etc rm -f fns*.el rm -f DOC* *~ \#*\# *.dvi *.log *.orig *.rej *,v =* core rm -f TAGS) for dir in etc/charsets etc/e etc/gnus etc/nxml etc/tutorials etc/refcards etc/schema ; do echo "Making links to \`${dir}'" (cd ${dir} ln `ls -d * | grep -v CVS | grep -v RCS` ../../${tempdir}/${dir} cd ../../${tempdir}/${dir} rm -f *~ \#*\# *,v =* core) done echo "Making links to \`etc/images'" (cd etc/images for f in *; do [ -f "$f" ] || continue case $f in (*~|\#*\#|*,v|=*|core) continue ;; esac ln $f ../../${tempdir}/etc/images done) for dir in etc/images/ezimage etc/images/gnus etc/images/gud etc/images/icons \ etc/images/low-color etc/images/mail etc/images/smilies ; do echo "Making links to \`${dir}'" (cd ${dir} for f in *; do [ -f "$f" ] || continue case $f in (*~|\#*\#|*,v|=*|core) continue ;; esac ln $f ../../../${tempdir}/${dir} done ) done for dir in etc/images/tree-widget/default etc/images/tree-widget/folder \ etc/images/smilies/grayscale etc/images/smilies/medium; do echo "Making links to \`${dir}'" (cd ${dir} ln `ls -d * | grep -v CVS | grep -v RCS` ../../../../${tempdir}/${dir} cd ../../../../${tempdir}/${dir} rm -f *~ \#*\# *,v =* core) done for dir in etc/images/icons/hicolor/*/apps \ etc/images/icons/hicolor/*/mimetypes; do echo "Making links to \`${dir}'" (cd ${dir} ln `ls -d * | grep -v CVS | grep -v RCS` ../../../../../../${tempdir}/${dir} cd ../../../../../../${tempdir}/${dir} rm -f *~ \#*\# *,v =* core) done echo "Making links to \`info'" # Don't distribute backups or autosaves. (cd info ln `find . -type f -print | grep -v CVS | grep -v RCS | grep -v cvsignore` ../${tempdir}/info #ln [a-zA-Z]* ../${tempdir}/info cd ../${tempdir}/info # Avoid an error when expanding the wildcards later. ln emacs dummy~ ; ln emacs \#dummy\# rm -f *~ \#*\# core .arch-inventory) echo "Making links to \`doc/emacs'" (cd doc/emacs ln *.texi *.aux *.cps *.fns *.kys *.vrs ../../${tempdir}/doc/emacs ln makefile.w32-in ../../${tempdir}/doc/emacs test -f README && ln README ../../${tempdir}/doc/emacs test -f Makefile.in && ln Makefile.in ../../${tempdir}/doc/emacs ln ChangeLog ../../${tempdir}/doc/emacs cp texinfo.tex ../../${tempdir}/doc/emacs cd ../../${tempdir}/doc/emacs rm -f \#*\# =* *~ core emacs-index* *.Z *.z xmail rm -f emacs.?? termcap.?? gdb.?? *.log *.toc *.dvi *.oaux) echo "Making links to \`doc/misc'" (cd doc/misc ln *.texi *.aux *.cps *.fns *.kys *.vrs ../../${tempdir}/doc/misc ln makefile.w32-in ../../${tempdir}/doc/misc test -f README && ln README ../../${tempdir}/doc/misc test -f Makefile.in && ln Makefile.in ../../${tempdir}/doc/misc ln ChangeLog ../../${tempdir}/doc/misc cp texinfo.tex ../../${tempdir}/doc/misc cd ../../${tempdir}/doc/misc rm -f \#*\# =* *~ core emacs-index* *.Z *.z xmail rm -f emacs.?? termcap.?? gdb.?? *.log *.toc *.dvi *.oaux) echo "Making links to \`doc/lispref'" (cd doc/lispref ln `ls -1 *.texi` ../../${tempdir}/doc/lispref ln *.aux *.cps *.fns *.kys *.vrs ../../${tempdir}/doc/lispref ln *.txt *.el spellfile tindex.pl ../../${tempdir}/doc/lispref ln makefile.w32-in ../../${tempdir}/doc/lispref test -f README && ln README ../../${tempdir}/doc/lispref test -f Makefile.in && ln Makefile.in ../../${tempdir}/doc/lispref ln ChangeLog ../../${tempdir}/doc/lispref cd ../../${tempdir}/doc/lispref rm -f \#*\# =* *~ core elisp-index* *.Z *.z xmail rm -f elisp.?? *.log *.toc *.dvi *.oaux) echo "Making links to \`doc/lispintro'" (cd doc/lispintro ln *.texi *.aux *.cps *.fns *.kys *.vrs *.eps ../../${tempdir}/doc/lispintro ln makefile.w32-in ../../${tempdir}/doc/lispintro test -f texinfo.tex && ln texinfo.tex ../../${tempdir}/doc/lispintro test -f README && ln README ../../${tempdir}/doc/lispintro test -f Makefile.in && ln Makefile.in ../../${tempdir}/doc/lispintro ln ChangeLog ../../${tempdir}/doc/lispintro cd ../../${tempdir}/doc/lispintro rm -f \#*\# =* *~ core *.Z *.z xmail rm -f emacs-lisp-intro.?? *.log *.toc *.dvi *.oaux) echo "Making links to \`doc/man'" (cd doc/man ln *.1 ../../${tempdir}/doc/man ln ChangeLog ../../${tempdir}/doc/man) ### It would be nice if they could all be symlinks to top-level copy, but ### you're not supposed to have any symlinks in distribution tar files. echo "Making sure copying notices are all copies of \`COPYING'" for subdir in . etc info leim lib-src lisp lwlib msdos nt src; do rm -f ${tempdir}/${subdir}/COPYING cp COPYING ${tempdir}/${subdir} done if [ "${newer}" ]; then echo "Removing files older than $newer" ## We remove .elc files unconditionally, on the theory that anyone picking ## up an incremental distribution already has a running Emacs to byte-compile ## them with. find ${tempparent} \( -name '*.elc' -o ! -newer ${newer} \) -exec rm -f {} \; fi if [ "${make_tar}" = yes ]; then if [ "${default_gzip}" = "" ]; then echo "Looking for gzip" temppath=`echo $PATH | sed 's/^:/.:/ s/::/:.:/g s/:$/:./ s/:/ /g'` default_gzip=`( for dir in ${temppath}; do if [ -f ${dir}/gzip ]; then echo 'gzip --best'; exit 0; fi done echo compress )` fi case "${default_gzip}" in bzip2) gzip_extension=.bz2 ;; compress* ) gzip_extension=.Z ;; lzma) gzip_extension=.lzma ;; * ) gzip_extension=.gz ;; esac echo "Creating tar file" (cd ${tempparent} ; tar cvf - ${emacsname} ) \ | ${default_gzip} \ > ${emacsname}.tar${gzip_extension} fi if [ "${clean_up}" = yes ]; then echo "Cleaning up the staging directory" rm -rf ${tempparent} else (cd ${tempparent}; mv ${emacsname} ..) rm -rf ${tempparent} fi # arch-tag: 26e3eb50-a394-4ab2-82b2-d8e5af500de7 ### make-dist ends here