Mercurial > emacs
view src/lisp.h @ 111317:bdfd83386e2d
gnus-cite.el (gnus-article-fill-cited-article): Make fill work properly for XEmacs as well.
gnus-cite.el (gnus-article-fill-cited-article, gnus-article-foldable-buffer, gnus-article-natural-long-line-p): Use window-width rather than frame-width.
| author | Katsumi Yamaoka <yamaoka@jpl.org> |
|---|---|
| date | Tue, 02 Nov 2010 02:19:52 +0000 |
| parents | 188673195616 |
| children | 2186ab0af4a5 |
line wrap: on
line source
/* Fundamental definitions for GNU Emacs Lisp interpreter. Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>. */ #ifndef EMACS_LISP_H #define EMACS_LISP_H #include <stdarg.h> #include <stddef.h> /* Use the configure flag --enable-checking[=LIST] to enable various types of run time checks for Lisp objects. */ #ifdef GC_CHECK_CONS_LIST #define CHECK_CONS_LIST() check_cons_list() #else #define CHECK_CONS_LIST() ((void)0) #endif /* These are default choices for the types to use. */ #ifdef _LP64 #ifndef EMACS_INT #define EMACS_INT long #define BITS_PER_EMACS_INT BITS_PER_LONG #endif #ifndef EMACS_UINT #define EMACS_UINT unsigned long #endif #else /* not _LP64 */ #ifndef EMACS_INT #define EMACS_INT int #define BITS_PER_EMACS_INT BITS_PER_INT #endif #ifndef EMACS_UINT #define EMACS_UINT unsigned int #endif #endif /* Extra internal type checking? */ extern int suppress_checking; extern void die (const char *, const char *, int) NO_RETURN; #ifdef ENABLE_CHECKING /* The suppress_checking variable is initialized to 0 in alloc.c. Set it to 1 using a debugger to temporarily disable aborting on detected internal inconsistencies or error conditions. Testing suppress_checking after the supplied condition ensures that the side effects produced by CHECK will be consistent, independent of whether ENABLE_CHECKING is defined, or whether the checks are suppressed at run time. In some cases, a good compiler may be able to optimize away the CHECK macro altogether, e.g., if XSTRING (x) uses CHECK to test STRINGP (x), but a particular use of XSTRING is invoked only after testing that STRINGP (x) is true, making the test redundant. */ #define CHECK(check,msg) (((check) || suppress_checking \ ? (void) 0 \ : die ((msg), __FILE__, __LINE__)), \ 0) #else /* Produce same side effects and result, but don't complain. */ #define CHECK(check,msg) ((check),0) #endif /* Define an Emacs version of "assert", since some system ones are flaky. */ #ifndef ENABLE_CHECKING #define eassert(X) (void) 0 #else /* ENABLE_CHECKING */ #if defined (__GNUC__) && __GNUC__ >= 2 && defined (__STDC__) #define eassert(cond) CHECK(cond,"assertion failed: " #cond) #else #define eassert(cond) CHECK(cond,"assertion failed") #endif #endif /* ENABLE_CHECKING */ /* Use the configure flag --enable-use-lisp-union-type to make Lisp_Object use a union type instead of the default int. The flag causes USE_LISP_UNION_TYPE to be defined. */ /***** Select the tagging scheme. *****/ /* There are basically two options that control the tagging scheme: - USE_LISP_UNION_TYPE says that Lisp_Object should be a union instead of an integer. - USE_LSB_TAG means that we can assume the least 3 bits of pointers are always 0, and we can thus use them to hold tag bits, without restricting our addressing space. If USE_LSB_TAG is not set, then we use the top 3 bits for tagging, thus restricting our possible address range. Currently USE_LSB_TAG is not allowed together with a union. This is not due to any fundamental technical (or political ;-) problem: nobody wrote the code to do it yet. USE_LSB_TAG not only requires the least 3 bits of pointers returned by malloc to be 0 but also needs to be able to impose a mult-of-8 alignment on the few static Lisp_Objects used: all the defsubr as well as the two special buffers buffer_defaults and buffer_local_symbols. */ /* First, try and define DECL_ALIGN(type,var) which declares a static variable VAR of type TYPE with the added requirement that it be TYPEBITS-aligned. */ #ifndef NO_DECL_ALIGN # ifndef DECL_ALIGN /* What compiler directive should we use for non-gcc compilers? -stef */ # if defined (__GNUC__) # define DECL_ALIGN(type, var) \ type __attribute__ ((__aligned__ (1 << GCTYPEBITS))) var # endif # endif #endif /* Let's USE_LSB_TAG on systems where we know malloc returns mult-of-8. */ #if defined GNU_MALLOC || defined DOUG_LEA_MALLOC || defined __GLIBC__ || defined DARWIN_OS /* We also need to be able to specify mult-of-8 alignment on static vars. */ # if defined DECL_ALIGN # define USE_LSB_TAG # endif #endif /* If we cannot use 8-byte alignment, make DECL_ALIGN a no-op. */ #ifndef DECL_ALIGN # ifdef USE_LSB_TAG # error "USE_LSB_TAG used without defining DECL_ALIGN" # endif # define DECL_ALIGN(type, var) type var #endif /* Define the fundamental Lisp data structures. */ /* If USE_2_TAGBITS_FOR_INTS is defined, then Lisp integers use 2 tags, to give them one extra bit, thus extending their range from e.g -2^28..2^28-1 to -2^29..2^29-1. */ #define USE_2_TAGS_FOR_INTS /* Making it work for the union case is too much trouble. */ #ifdef USE_LISP_UNION_TYPE # undef USE_2_TAGS_FOR_INTS #endif /* This is the set of Lisp data types. */ #if !defined USE_2_TAGS_FOR_INTS # define LISP_INT_TAG Lisp_Int # define case_Lisp_Int case Lisp_Int # define LISP_STRING_TAG 4 # define LISP_INT_TAG_P(x) ((x) == Lisp_Int) #else # define LISP_INT_TAG Lisp_Int0 # define case_Lisp_Int case Lisp_Int0: case Lisp_Int1 # ifdef USE_LSB_TAG # define LISP_INT1_TAG 4 # define LISP_STRING_TAG 1 # define LISP_INT_TAG_P(x) (((x) & 3) == 0) # else # define LISP_INT1_TAG 1 # define LISP_STRING_TAG 4 # define LISP_INT_TAG_P(x) (((x) & 6) == 0) # endif #endif enum Lisp_Type { /* Integer. XINT (obj) is the integer value. */ #ifdef USE_2_TAGS_FOR_INTS Lisp_Int0 = 0, Lisp_Int1 = LISP_INT1_TAG, #else Lisp_Int = 0, #endif /* Symbol. XSYMBOL (object) points to a struct Lisp_Symbol. */ Lisp_Symbol = 2, /* Miscellaneous. XMISC (object) points to a union Lisp_Misc, whose first member indicates the subtype. */ Lisp_Misc = 3, /* String. XSTRING (object) points to a struct Lisp_String. The length of the string, and its contents, are stored therein. */ Lisp_String = LISP_STRING_TAG, /* Vector of Lisp objects, or something resembling it. XVECTOR (object) points to a struct Lisp_Vector, which contains the size and contents. The size field also contains the type information, if it's not a real vector object. */ Lisp_Vectorlike = 5, /* Cons. XCONS (object) points to a struct Lisp_Cons. */ Lisp_Cons = 6, Lisp_Float = 7, }; /* This is the set of data types that share a common structure. The first member of the structure is a type code from this set. The enum values are arbitrary, but we'll use large numbers to make it more likely that we'll spot the error if a random word in memory is mistakenly interpreted as a Lisp_Misc. */ enum Lisp_Misc_Type { Lisp_Misc_Free = 0x5eab, Lisp_Misc_Marker, Lisp_Misc_Overlay, Lisp_Misc_Save_Value, /* Currently floats are not a misc type, but let's define this in case we want to change that. */ Lisp_Misc_Float, /* This is not a type code. It is for range checking. */ Lisp_Misc_Limit }; /* These are the types of forwarding objects used in the value slot of symbols for special built-in variables whose value is stored in C variables. */ enum Lisp_Fwd_Type { Lisp_Fwd_Int, /* Fwd to a C `int' variable. */ Lisp_Fwd_Bool, /* Fwd to a C boolean var. */ Lisp_Fwd_Obj, /* Fwd to a C Lisp_Object variable. */ Lisp_Fwd_Buffer_Obj, /* Fwd to a Lisp_Object field of buffers. */ Lisp_Fwd_Kboard_Obj, /* Fwd to a Lisp_Object field of kboards. */ }; #ifndef GCTYPEBITS #define GCTYPEBITS 3 #endif /* These values are overridden by the m- file on some machines. */ #ifndef VALBITS #define VALBITS (BITS_PER_EMACS_INT - GCTYPEBITS) #endif #ifdef USE_LISP_UNION_TYPE #ifndef WORDS_BIGENDIAN /* Definition of Lisp_Object for little-endian machines. */ typedef union Lisp_Object { /* Used for comparing two Lisp_Objects; also, positive integers can be accessed fast this way. */ EMACS_UINT i; struct { EMACS_INT val : VALBITS; enum Lisp_Type type : GCTYPEBITS; } s; struct { EMACS_UINT val : VALBITS; enum Lisp_Type type : GCTYPEBITS; } u; } Lisp_Object; #else /* If WORDS_BIGENDIAN */ typedef union Lisp_Object { /* Used for comparing two Lisp_Objects; also, positive integers can be accessed fast this way. */ EMACS_UINT i; struct { enum Lisp_Type type : GCTYPEBITS; EMACS_INT val : VALBITS; } s; struct { enum Lisp_Type type : GCTYPEBITS; EMACS_UINT val : VALBITS; } u; } Lisp_Object; #endif /* WORDS_BIGENDIAN */ #ifdef __GNUC__ static __inline__ Lisp_Object LISP_MAKE_RVALUE (Lisp_Object o) { return o; } #else /* This is more portable to pre-C99 non-GCC compilers, but for backwards compatibility GCC still accepts an old GNU extension which caused this to only generate a warning. */ #define LISP_MAKE_RVALUE(o) (0 ? (o) : (o)) #endif #else /* USE_LISP_UNION_TYPE */ /* If union type is not wanted, define Lisp_Object as just a number. */ typedef EMACS_INT Lisp_Object; #define LISP_MAKE_RVALUE(o) (0+(o)) #endif /* USE_LISP_UNION_TYPE */ /* In the size word of a vector, this bit means the vector has been marked. */ #define ARRAY_MARK_FLAG ((EMACS_UINT) 1 << (BITS_PER_EMACS_INT - 1)) /* In the size word of a struct Lisp_Vector, this bit means it's really some other vector-like object. */ #define PSEUDOVECTOR_FLAG ((ARRAY_MARK_FLAG >> 1)) /* In a pseudovector, the size field actually contains a word with one PSEUDOVECTOR_FLAG bit set, and exactly one of the following bits to indicate the actual type. We use a bitset, even tho only one of the bits can be set at any particular time just so as to be able to use micro-optimizations such as testing membership of a particular subset of pseudovectors in Fequal. It is not crucial, but there are plenty of bits here, so why not do it? */ enum pvec_type { PVEC_NORMAL_VECTOR = 0, PVEC_PROCESS = 0x200, PVEC_FRAME = 0x400, PVEC_COMPILED = 0x800, PVEC_WINDOW = 0x1000, PVEC_WINDOW_CONFIGURATION = 0x2000, PVEC_SUBR = 0x4000, PVEC_CHAR_TABLE = 0x8000, PVEC_BOOL_VECTOR = 0x10000, PVEC_BUFFER = 0x20000, PVEC_HASH_TABLE = 0x40000, PVEC_TERMINAL = 0x80000, PVEC_SUB_CHAR_TABLE = 0x100000, PVEC_FONT = 0x200000, PVEC_OTHER = 0x400000, PVEC_TYPE_MASK = 0x7ffe00 #if 0 /* This is used to make the value of PSEUDOVECTOR_FLAG available to GDB. It doesn't work on OS Alpha. Moved to a variable in emacs.c. */ PVEC_FLAG = PSEUDOVECTOR_FLAG #endif }; /* For convenience, we also store the number of elements in these bits. Note that this size is not necessarily the memory-footprint size, but only the number of Lisp_Object fields (that need to be traced by the GC). The distinction is used e.g. by Lisp_Process which places extra non-Lisp_Object fields at the end of the structure. */ #define PSEUDOVECTOR_SIZE_MASK 0x1ff /* Number of bits to put in each character in the internal representation of bool vectors. This should not vary across implementations. */ #define BOOL_VECTOR_BITS_PER_CHAR 8 /* These macros extract various sorts of values from a Lisp_Object. For example, if tem is a Lisp_Object whose type is Lisp_Cons, XCONS (tem) is the struct Lisp_Cons * pointing to the memory for that cons. */ #ifndef USE_LISP_UNION_TYPE /* Return a perfect hash of the Lisp_Object representation. */ #define XHASH(a) (a) #ifdef USE_LSB_TAG #define TYPEMASK ((((EMACS_INT) 1) << GCTYPEBITS) - 1) #define XTYPE(a) ((enum Lisp_Type) (((EMACS_UINT) (a)) & TYPEMASK)) #ifdef USE_2_TAGS_FOR_INTS # define XINT(a) (((EMACS_INT) (a)) >> (GCTYPEBITS - 1)) # define XUINT(a) (((EMACS_UINT) (a)) >> (GCTYPEBITS - 1)) # define make_number(N) (((EMACS_INT) (N)) << (GCTYPEBITS - 1)) #else # define XINT(a) (((EMACS_INT) (a)) >> GCTYPEBITS) # define XUINT(a) (((EMACS_UINT) (a)) >> GCTYPEBITS) # define make_number(N) (((EMACS_INT) (N)) << GCTYPEBITS) #endif #define XSET(var, type, ptr) \ (eassert (XTYPE (ptr) == 0), /* Check alignment. */ \ (var) = ((EMACS_INT) (type)) | ((EMACS_INT) (ptr))) #define XPNTR(a) ((EMACS_INT) ((a) & ~TYPEMASK)) #else /* not USE_LSB_TAG */ #define VALMASK ((((EMACS_INT) 1) << VALBITS) - 1) /* One need to override this if there must be high bits set in data space (doing the result of the below & ((1 << (GCTYPE + 1)) - 1) would work on all machines, but would penalize machines which don't need it) */ #define XTYPE(a) ((enum Lisp_Type) (((EMACS_UINT) (a)) >> VALBITS)) /* For integers known to be positive, XFASTINT provides fast retrieval and XSETFASTINT provides fast storage. This takes advantage of the fact that Lisp_Int is 0. */ #define XFASTINT(a) ((a) + 0) #define XSETFASTINT(a, b) ((a) = (b)) /* Extract the value of a Lisp_Object as a (un)signed integer. */ #ifdef USE_2_TAGS_FOR_INTS # define XINT(a) ((((EMACS_INT) (a)) << (GCTYPEBITS - 1)) >> (GCTYPEBITS - 1)) # define XUINT(a) ((EMACS_UINT) ((a) & (1 + (VALMASK << 1)))) # define make_number(N) ((((EMACS_INT) (N)) & (1 + (VALMASK << 1)))) #else # define XINT(a) ((((EMACS_INT) (a)) << (BITS_PER_EMACS_INT - VALBITS)) \ >> (BITS_PER_EMACS_INT - VALBITS)) # define XUINT(a) ((EMACS_UINT) ((a) & VALMASK)) # define make_number(N) \ ((((EMACS_INT) (N)) & VALMASK) | ((EMACS_INT) Lisp_Int) << VALBITS) #endif #define XSET(var, type, ptr) \ ((var) = ((EMACS_INT)(type) << VALBITS) + ((EMACS_INT) (ptr) & VALMASK)) #define XPNTR(a) ((EMACS_UINT) ((a) & VALMASK)) #endif /* not USE_LSB_TAG */ #else /* USE_LISP_UNION_TYPE */ #ifdef USE_2_TAGS_FOR_INTS # error "USE_2_TAGS_FOR_INTS is not supported with USE_LISP_UNION_TYPE" #endif #define XHASH(a) ((a).i) #define XTYPE(a) ((enum Lisp_Type) (a).u.type) #ifdef EXPLICIT_SIGN_EXTEND /* Make sure we sign-extend; compilers have been known to fail to do so. We additionally cast to EMACS_INT since it seems that some compilers have been known to fail to do so, even though the bitfield is declared as EMACS_INT already. */ #define XINT(a) ((((EMACS_INT) (a).s.val) << (BITS_PER_EMACS_INT - VALBITS)) \ >> (BITS_PER_EMACS_INT - VALBITS)) #else #define XINT(a) ((a).s.val) #endif /* EXPLICIT_SIGN_EXTEND */ #define XUINT(a) ((a).u.val) #ifdef USE_LSB_TAG # define XSET(var, vartype, ptr) \ (eassert ((((EMACS_UINT) (ptr)) & ((1 << GCTYPEBITS) - 1)) == 0), \ (var).u.val = ((EMACS_UINT) (ptr)) >> GCTYPEBITS, \ (var).u.type = ((char) (vartype))) /* Some versions of gcc seem to consider the bitfield width when issuing the "cast to pointer from integer of different size" warning, so the cast is here to widen the value back to its natural size. */ # define XPNTR(v) ((EMACS_INT)((v).s.val) << GCTYPEBITS) #else /* !USE_LSB_TAG */ /* For integers known to be positive, XFASTINT provides fast retrieval and XSETFASTINT provides fast storage. This takes advantage of the fact that Lisp_Int is 0. */ # define XFASTINT(a) ((a).i + 0) # define XSETFASTINT(a, b) ((a).i = (b)) # define XSET(var, vartype, ptr) \ (((var).s.val = ((EMACS_INT) (ptr))), ((var).s.type = ((char) (vartype)))) #endif /* !USE_LSB_TAG */ #if __GNUC__ >= 2 && defined (__OPTIMIZE__) #define make_number(N) \ (__extension__ ({ Lisp_Object _l; _l.s.val = (N); _l.s.type = Lisp_Int; _l; })) #else extern Lisp_Object make_number (EMACS_INT); #endif #endif /* USE_LISP_UNION_TYPE */ /* For integers known to be positive, XFASTINT sometimes provides faster retrieval and XSETFASTINT provides faster storage. If not, fallback on the non-accelerated path. */ #ifndef XFASTINT # define XFASTINT(a) (XINT (a)) # define XSETFASTINT(a, b) (XSETINT (a, b)) #endif #define EQ(x, y) (XHASH (x) == XHASH (y)) #ifndef XPNTR #ifdef DATA_SEG_BITS /* This case is used for the rt-pc. In the diffs I was given, it checked for ptr = 0 and did not adjust it in that case. But I don't think that zero should ever be found in a Lisp object whose data type says it points to something. */ #define XPNTR(a) (XUINT (a) | DATA_SEG_BITS) #else /* Some versions of gcc seem to consider the bitfield width when issuing the "cast to pointer from integer of different size" warning, so the cast is here to widen the value back to its natural size. */ #define XPNTR(a) ((EMACS_INT) XUINT (a)) #endif #endif /* no XPNTR */ /* Largest and smallest representable fixnum values. These are the C values. */ #ifdef USE_2_TAGS_FOR_INTS # define MOST_NEGATIVE_FIXNUM - ((EMACS_INT) 1 << VALBITS) # define MOST_POSITIVE_FIXNUM (((EMACS_INT) 1 << VALBITS) - 1) /* Mask indicating the significant bits of a Lisp_Int. I.e. (x & INTMASK) == XUINT (make_number (x)). */ # define INTMASK ((((EMACS_INT) 1) << (VALBITS + 1)) - 1) #else # define MOST_NEGATIVE_FIXNUM - ((EMACS_INT) 1 << (VALBITS - 1)) # define MOST_POSITIVE_FIXNUM (((EMACS_INT) 1 << (VALBITS - 1)) - 1) /* Mask indicating the significant bits of a Lisp_Int. I.e. (x & INTMASK) == XUINT (make_number (x)). */ # define INTMASK ((((EMACS_INT) 1) << VALBITS) - 1) #endif /* Value is non-zero if I doesn't fit into a Lisp fixnum. It is written this way so that it also works if I is of unsigned type. */ #define FIXNUM_OVERFLOW_P(i) \ ((i) > MOST_POSITIVE_FIXNUM \ || ((i) < 0 && (i) < MOST_NEGATIVE_FIXNUM)) /* Extract a value or address from a Lisp_Object. */ #define XCONS(a) (eassert (CONSP(a)),(struct Lisp_Cons *) XPNTR(a)) #define XVECTOR(a) (eassert (VECTORLIKEP(a)),(struct Lisp_Vector *) XPNTR(a)) #define XSTRING(a) (eassert (STRINGP(a)),(struct Lisp_String *) XPNTR(a)) #define XSYMBOL(a) (eassert (SYMBOLP(a)),(struct Lisp_Symbol *) XPNTR(a)) #define XFLOAT(a) (eassert (FLOATP(a)),(struct Lisp_Float *) XPNTR(a)) /* Misc types. */ #define XMISC(a) ((union Lisp_Misc *) XPNTR(a)) #define XMISCANY(a) (eassert (MISCP (a)), &(XMISC(a)->u_any)) #define XMISCTYPE(a) (XMISCANY (a)->type) #define XMARKER(a) (eassert (MARKERP (a)), &(XMISC(a)->u_marker)) #define XOVERLAY(a) (eassert (OVERLAYP (a)), &(XMISC(a)->u_overlay)) #define XSAVE_VALUE(a) (eassert (SAVE_VALUEP (a)), &(XMISC(a)->u_save_value)) /* Forwarding object types. */ #define XFWDTYPE(a) (a->u_intfwd.type) #define XINTFWD(a) (eassert (INTFWDP (a)), &((a)->u_intfwd)) #define XBOOLFWD(a) (eassert (BOOLFWDP (a)), &((a)->u_boolfwd)) #define XOBJFWD(a) (eassert (OBJFWDP (a)), &((a)->u_objfwd)) #define XBUFFER_OBJFWD(a) \ (eassert (BUFFER_OBJFWDP (a)), &((a)->u_buffer_objfwd)) #define XKBOARD_OBJFWD(a) \ (eassert (KBOARD_OBJFWDP (a)), &((a)->u_kboard_objfwd)) /* Pseudovector types. */ #define XPROCESS(a) (eassert (PROCESSP(a)),(struct Lisp_Process *) XPNTR(a)) #define XWINDOW(a) (eassert (WINDOWP(a)),(struct window *) XPNTR(a)) #define XTERMINAL(a) (eassert (TERMINALP(a)),(struct terminal *) XPNTR(a)) #define XSUBR(a) (eassert (SUBRP(a)),(struct Lisp_Subr *) XPNTR(a)) #define XBUFFER(a) (eassert (BUFFERP(a)),(struct buffer *) XPNTR(a)) #define XCHAR_TABLE(a) (eassert (CHAR_TABLE_P (a)), (struct Lisp_Char_Table *) XPNTR(a)) #define XSUB_CHAR_TABLE(a) (eassert (SUB_CHAR_TABLE_P (a)), (struct Lisp_Sub_Char_Table *) XPNTR(a)) #define XBOOL_VECTOR(a) (eassert (BOOL_VECTOR_P (a)), (struct Lisp_Bool_Vector *) XPNTR(a)) /* Construct a Lisp_Object from a value or address. */ #define XSETINT(a, b) (a) = make_number (b) #define XSETCONS(a, b) XSET (a, Lisp_Cons, b) #define XSETVECTOR(a, b) XSET (a, Lisp_Vectorlike, b) #define XSETSTRING(a, b) XSET (a, Lisp_String, b) #define XSETSYMBOL(a, b) XSET (a, Lisp_Symbol, b) #define XSETFLOAT(a, b) XSET (a, Lisp_Float, b) /* Misc types. */ #define XSETMISC(a, b) XSET (a, Lisp_Misc, b) #define XSETMARKER(a, b) (XSETMISC (a, b), XMISCTYPE (a) = Lisp_Misc_Marker) /* Pseudovector types. */ #define XSETPVECTYPE(v,code) ((v)->size |= PSEUDOVECTOR_FLAG | (code)) #define XSETPSEUDOVECTOR(a, b, code) \ (XSETVECTOR (a, b), \ eassert ((XVECTOR (a)->size & (PSEUDOVECTOR_FLAG | PVEC_TYPE_MASK)) \ == (PSEUDOVECTOR_FLAG | (code)))) #define XSETWINDOW_CONFIGURATION(a, b) \ (XSETPSEUDOVECTOR (a, b, PVEC_WINDOW_CONFIGURATION)) #define XSETPROCESS(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_PROCESS)) #define XSETWINDOW(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_WINDOW)) #define XSETTERMINAL(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_TERMINAL)) #define XSETSUBR(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_SUBR)) #define XSETCOMPILED(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_COMPILED)) #define XSETBUFFER(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_BUFFER)) #define XSETCHAR_TABLE(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_CHAR_TABLE)) #define XSETBOOL_VECTOR(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_BOOL_VECTOR)) #define XSETSUB_CHAR_TABLE(a, b) (XSETPSEUDOVECTOR (a, b, PVEC_SUB_CHAR_TABLE)) /* Convenience macros for dealing with Lisp arrays. */ #define AREF(ARRAY, IDX) XVECTOR ((ARRAY))->contents[IDX] #define ASIZE(ARRAY) XVECTOR ((ARRAY))->size /* The IDX==IDX tries to detect when the macro argument is side-effecting. */ #define ASET(ARRAY, IDX, VAL) \ (eassert ((IDX) == (IDX)), \ eassert ((IDX) >= 0 && (IDX) < ASIZE (ARRAY)), \ AREF ((ARRAY), (IDX)) = (VAL)) /* Convenience macros for dealing with Lisp strings. */ #define SDATA(string) (XSTRING (string)->data + 0) #define SREF(string, index) (SDATA (string)[index] + 0) #define SSET(string, index, new) (SDATA (string)[index] = (new)) #define SCHARS(string) (XSTRING (string)->size + 0) #define SBYTES(string) (STRING_BYTES (XSTRING (string)) + 0) #define STRING_SET_CHARS(string, newsize) \ (XSTRING (string)->size = (newsize)) #define STRING_COPYIN(string, index, new, count) \ memcpy (SDATA (string) + index, new, count) /* Type checking. */ #define CHECK_TYPE(ok, Qxxxp, x) \ do { if (!(ok)) wrong_type_argument (Qxxxp, (x)); } while (0) /* See the macros in intervals.h. */ typedef struct interval *INTERVAL; /* Complain if object is not string or buffer type */ #define CHECK_STRING_OR_BUFFER(x) \ CHECK_TYPE (STRINGP (x) || BUFFERP (x), Qbuffer_or_string_p, x) /* In a cons, the markbit of the car is the gc mark bit */ struct Lisp_Cons { /* Please do not use the names of these elements in code other than the core lisp implementation. Use XCAR and XCDR below. */ #ifdef HIDE_LISP_IMPLEMENTATION Lisp_Object car_; union { Lisp_Object cdr_; struct Lisp_Cons *chain; } u; #else Lisp_Object car; union { Lisp_Object cdr; struct Lisp_Cons *chain; } u; #endif }; /* Take the car or cdr of something known to be a cons cell. */ /* The _AS_LVALUE macros shouldn't be used outside of the minimal set of code that has to know what a cons cell looks like. Other code not part of the basic lisp implementation should assume that the car and cdr fields are not accessible as lvalues. (What if we want to switch to a copying collector someday? Cached cons cell field addresses may be invalidated at arbitrary points.) */ #ifdef HIDE_LISP_IMPLEMENTATION #define XCAR_AS_LVALUE(c) (XCONS ((c))->car_) #define XCDR_AS_LVALUE(c) (XCONS ((c))->u.cdr_) #else #define XCAR_AS_LVALUE(c) (XCONS ((c))->car) #define XCDR_AS_LVALUE(c) (XCONS ((c))->u.cdr) #endif /* Use these from normal code. */ #define XCAR(c) LISP_MAKE_RVALUE(XCAR_AS_LVALUE(c)) #define XCDR(c) LISP_MAKE_RVALUE(XCDR_AS_LVALUE(c)) /* Use these to set the fields of a cons cell. Note that both arguments may refer to the same object, so 'n' should not be read after 'c' is first modified. Also, neither argument should be evaluated more than once; side effects are especially common in the second argument. */ #define XSETCAR(c,n) (XCAR_AS_LVALUE(c) = (n)) #define XSETCDR(c,n) (XCDR_AS_LVALUE(c) = (n)) /* Take the car or cdr of something whose type is not known. */ #define CAR(c) \ (CONSP ((c)) ? XCAR ((c)) \ : NILP ((c)) ? Qnil \ : wrong_type_argument (Qlistp, (c))) #define CDR(c) \ (CONSP ((c)) ? XCDR ((c)) \ : NILP ((c)) ? Qnil \ : wrong_type_argument (Qlistp, (c))) /* Take the car or cdr of something whose type is not known. */ #define CAR_SAFE(c) \ (CONSP ((c)) ? XCAR ((c)) : Qnil) #define CDR_SAFE(c) \ (CONSP ((c)) ? XCDR ((c)) : Qnil) /* Nonzero if STR is a multibyte string. */ #define STRING_MULTIBYTE(STR) \ (XSTRING (STR)->size_byte >= 0) /* Return the length in bytes of STR. */ #ifdef GC_CHECK_STRING_BYTES struct Lisp_String; extern EMACS_INT string_bytes (struct Lisp_String *); #define STRING_BYTES(S) string_bytes ((S)) #else /* not GC_CHECK_STRING_BYTES */ #define STRING_BYTES(STR) \ ((STR)->size_byte < 0 ? (STR)->size : (STR)->size_byte) #endif /* not GC_CHECK_STRING_BYTES */ /* Mark STR as a unibyte string. */ #define STRING_SET_UNIBYTE(STR) \ do { if (EQ (STR, empty_multibyte_string)) \ (STR) = empty_unibyte_string; \ else XSTRING (STR)->size_byte = -1; } while (0) /* Mark STR as a multibyte string. Assure that STR contains only ASCII characters in advance. */ #define STRING_SET_MULTIBYTE(STR) \ do { if (EQ (STR, empty_unibyte_string)) \ (STR) = empty_multibyte_string; \ else XSTRING (STR)->size_byte = XSTRING (STR)->size; } while (0) /* Get text properties. */ #define STRING_INTERVALS(STR) (XSTRING (STR)->intervals + 0) /* Set text properties. */ #define STRING_SET_INTERVALS(STR, INT) (XSTRING (STR)->intervals = (INT)) /* In a string or vector, the sign bit of the `size' is the gc mark bit */ struct Lisp_String { EMACS_INT size; EMACS_INT size_byte; INTERVAL intervals; /* text properties in this string */ unsigned char *data; }; struct Lisp_Vector { EMACS_UINT size; struct Lisp_Vector *next; Lisp_Object contents[1]; }; /* If a struct is made to look like a vector, this macro returns the length of the shortest vector that would hold that struct. */ #define VECSIZE(type) ((sizeof (type) \ - offsetof (struct Lisp_Vector, contents[0]) \ + sizeof(Lisp_Object) - 1) /* round up */ \ / sizeof (Lisp_Object)) /* Like VECSIZE, but used when the pseudo-vector has non-Lisp_Object fields at the end and we need to compute the number of Lisp_Object fields (the ones that the GC needs to trace). */ #define PSEUDOVECSIZE(type, nonlispfield) \ ((offsetof(type, nonlispfield) - offsetof(struct Lisp_Vector, contents[0])) \ / sizeof (Lisp_Object)) /* A char-table is a kind of vectorlike, with contents are like a vector but with a few other slots. For some purposes, it makes sense to handle a char-table with type struct Lisp_Vector. An element of a char table can be any Lisp objects, but if it is a sub char-table, we treat it a table that contains information of a specific range of characters. A sub char-table has the same structure as a vector. A sub char table appears only in an element of a char-table, and there's no way to access it directly from Emacs Lisp program. */ /* This is the number of slots that every char table must have. This counts the ordinary slots and the top, defalt, parent, and purpose slots. */ #define CHAR_TABLE_STANDARD_SLOTS (VECSIZE (struct Lisp_Char_Table) - 1) /* Return the number of "extra" slots in the char table CT. */ #define CHAR_TABLE_EXTRA_SLOTS(CT) \ (((CT)->size & PSEUDOVECTOR_SIZE_MASK) - CHAR_TABLE_STANDARD_SLOTS) #ifdef __GNUC__ #define CHAR_TABLE_REF_ASCII(CT, IDX) \ ({struct Lisp_Char_Table *_tbl = NULL; \ Lisp_Object _val; \ do { \ _tbl = _tbl ? XCHAR_TABLE (_tbl->parent) : XCHAR_TABLE (CT); \ _val = (! SUB_CHAR_TABLE_P (_tbl->ascii) ? _tbl->ascii \ : XSUB_CHAR_TABLE (_tbl->ascii)->contents[IDX]); \ if (NILP (_val)) \ _val = _tbl->defalt; \ } while (NILP (_val) && ! NILP (_tbl->parent)); \ _val; }) #else /* not __GNUC__ */ #define CHAR_TABLE_REF_ASCII(CT, IDX) \ (! NILP (XCHAR_TABLE (CT)->ascii) \ ? (! SUB_CHAR_TABLE_P (XCHAR_TABLE (CT)->ascii) \ ? XCHAR_TABLE (CT)->ascii \ : ! NILP (XSUB_CHAR_TABLE (XCHAR_TABLE (CT)->ascii)->contents[IDX]) \ ? XSUB_CHAR_TABLE (XCHAR_TABLE (CT)->ascii)->contents[IDX] \ : char_table_ref ((CT), (IDX))) \ : char_table_ref ((CT), (IDX))) #endif /* not __GNUC__ */ /* Almost equivalent to Faref (CT, IDX) with optimization for ASCII characters. Do not check validity of CT. */ #define CHAR_TABLE_REF(CT, IDX) \ (ASCII_CHAR_P (IDX) ? CHAR_TABLE_REF_ASCII ((CT), (IDX)) \ : char_table_ref ((CT), (IDX))) /* Almost equivalent to Faref (CT, IDX). However, if the result is not a character, return IDX. For these characters, do not check validity of CT and do not follow parent. */ #define CHAR_TABLE_TRANSLATE(CT, IDX) \ char_table_translate (CT, IDX) /* Equivalent to Faset (CT, IDX, VAL) with optimization for ASCII and 8-bit European characters. Do not check validity of CT. */ #define CHAR_TABLE_SET(CT, IDX, VAL) \ (((IDX) >= 0 && ASCII_CHAR_P (IDX) \ && SUB_CHAR_TABLE_P (XCHAR_TABLE (CT)->ascii)) \ ? XSUB_CHAR_TABLE (XCHAR_TABLE (CT)->ascii)->contents[IDX] = VAL \ : char_table_set (CT, IDX, VAL)) #define CHARTAB_SIZE_BITS_0 6 #define CHARTAB_SIZE_BITS_1 4 #define CHARTAB_SIZE_BITS_2 5 #define CHARTAB_SIZE_BITS_3 7 extern const int chartab_size[4]; struct Lisp_Sub_Char_Table; struct Lisp_Char_Table { /* This is the vector's size field, which also holds the pseudovector type information. It holds the size, too. The size counts the defalt, parent, purpose, ascii, contents, and extras slots. */ EMACS_UINT size; struct Lisp_Vector *next; /* This holds a default value, which is used whenever the value for a specific character is nil. */ Lisp_Object defalt; /* This points to another char table, which we inherit from when the value for a specific character is nil. The `defalt' slot takes precedence over this. */ Lisp_Object parent; /* This is a symbol which says what kind of use this char-table is meant for. */ Lisp_Object purpose; /* The bottom sub char-table for characters of the range 0..127. It is nil if none of ASCII character has a specific value. */ Lisp_Object ascii; Lisp_Object contents[(1 << CHARTAB_SIZE_BITS_0)]; /* These hold additional data. It is a vector. */ Lisp_Object extras[1]; }; struct Lisp_Sub_Char_Table { /* This is the vector's size field, which also holds the pseudovector type information. It holds the size, too. */ EMACS_INT size; struct Lisp_Vector *next; /* Depth of this sub char-table. It should be 1, 2, or 3. A sub char-table of depth 1 contains 16 elements, and each element covers 4096 (128*32) characters. A sub char-table of depth 2 contains 32 elements, and each element covers 128 characters. A sub char-table of depth 3 contains 128 elements, and each element is for one character. */ Lisp_Object depth; /* Minimum character covered by the sub char-table. */ Lisp_Object min_char; Lisp_Object contents[1]; }; /* A boolvector is a kind of vectorlike, with contents are like a string. */ struct Lisp_Bool_Vector { /* This is the vector's size field. It doesn't have the real size, just the subtype information. */ EMACS_UINT vector_size; struct Lisp_Vector *next; /* This is the size in bits. */ EMACS_UINT size; /* This contains the actual bits, packed into bytes. */ unsigned char data[1]; }; /* This structure describes a built-in function. It is generated by the DEFUN macro only. defsubr makes it into a Lisp object. This type is treated in most respects as a pseudovector, but since we never dynamically allocate or free them, we don't need a next-vector field. */ struct Lisp_Subr { EMACS_UINT size; union { Lisp_Object (*a0) (void); Lisp_Object (*a1) (Lisp_Object); Lisp_Object (*a2) (Lisp_Object, Lisp_Object); Lisp_Object (*a3) (Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object (*a4) (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object (*a5) (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object (*a6) (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object (*a7) (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object (*a8) (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object (*aUNEVALLED) (Lisp_Object args); Lisp_Object (*aMANY) (int, Lisp_Object *); } function; short min_args, max_args; const char *symbol_name; const char *intspec; const char *doc; }; /*********************************************************************** Symbols ***********************************************************************/ /* Interned state of a symbol. */ enum symbol_interned { SYMBOL_UNINTERNED = 0, SYMBOL_INTERNED = 1, SYMBOL_INTERNED_IN_INITIAL_OBARRAY = 2 }; enum symbol_redirect { SYMBOL_PLAINVAL = 4, SYMBOL_VARALIAS = 1, SYMBOL_LOCALIZED = 2, SYMBOL_FORWARDED = 3 }; /* In a symbol, the markbit of the plist is used as the gc mark bit */ struct Lisp_Symbol { unsigned gcmarkbit : 1; /* Indicates where the value can be found: 0 : it's a plain var, the value is in the `value' field. 1 : it's a varalias, the value is really in the `alias' symbol. 2 : it's a localized var, the value is in the `blv' object. 3 : it's a forwarding variable, the value is in `forward'. */ enum symbol_redirect redirect : 3; /* Non-zero means symbol is constant, i.e. changing its value should signal an error. If the value is 3, then the var can be changed, but only by `defconst'. */ unsigned constant : 2; /* Interned state of the symbol. This is an enumerator from enum symbol_interned. */ unsigned interned : 2; /* The symbol's name, as a Lisp string. The name "xname" is used to intentionally break code referring to the old field "name" of type pointer to struct Lisp_String. */ Lisp_Object xname; /* Value of the symbol or Qunbound if unbound. If this symbol is a defvaralias, `alias' contains the symbol for which it is an alias. Use the SYMBOL_VALUE and SET_SYMBOL_VALUE macros to get and set a symbol's value, to take defvaralias into account. */ union { Lisp_Object value; struct Lisp_Symbol *alias; struct Lisp_Buffer_Local_Value *blv; union Lisp_Fwd *fwd; } val; /* Function value of the symbol or Qunbound if not fboundp. */ Lisp_Object function; /* The symbol's property list. */ Lisp_Object plist; /* Next symbol in obarray bucket, if the symbol is interned. */ struct Lisp_Symbol *next; }; /* Value is name of symbol. */ #define SYMBOL_VAL(sym) \ (eassert ((sym)->redirect == SYMBOL_PLAINVAL), (sym)->val.value) #define SYMBOL_ALIAS(sym) \ (eassert ((sym)->redirect == SYMBOL_VARALIAS), (sym)->val.alias) #define SYMBOL_BLV(sym) \ (eassert ((sym)->redirect == SYMBOL_LOCALIZED), (sym)->val.blv) #define SYMBOL_FWD(sym) \ (eassert ((sym)->redirect == SYMBOL_FORWARDED), (sym)->val.fwd) #define SET_SYMBOL_VAL(sym, v) \ (eassert ((sym)->redirect == SYMBOL_PLAINVAL), (sym)->val.value = (v)) #define SET_SYMBOL_ALIAS(sym, v) \ (eassert ((sym)->redirect == SYMBOL_VARALIAS), (sym)->val.alias = (v)) #define SET_SYMBOL_BLV(sym, v) \ (eassert ((sym)->redirect == SYMBOL_LOCALIZED), (sym)->val.blv = (v)) #define SET_SYMBOL_FWD(sym, v) \ (eassert ((sym)->redirect == SYMBOL_FORWARDED), (sym)->val.fwd = (v)) #define SYMBOL_NAME(sym) \ LISP_MAKE_RVALUE (XSYMBOL (sym)->xname) /* Value is non-zero if SYM is an interned symbol. */ #define SYMBOL_INTERNED_P(sym) \ (XSYMBOL (sym)->interned != SYMBOL_UNINTERNED) /* Value is non-zero if SYM is interned in initial_obarray. */ #define SYMBOL_INTERNED_IN_INITIAL_OBARRAY_P(sym) \ (XSYMBOL (sym)->interned == SYMBOL_INTERNED_IN_INITIAL_OBARRAY) /* Value is non-zero if symbol is considered a constant, i.e. its value cannot be changed (there is an exception for keyword symbols, whose value can be set to the keyword symbol itself). */ #define SYMBOL_CONSTANT_P(sym) XSYMBOL (sym)->constant /*********************************************************************** Hash Tables ***********************************************************************/ /* The structure of a Lisp hash table. */ struct Lisp_Hash_Table { /* Vector fields. The hash table code doesn't refer to these. */ EMACS_UINT size; struct Lisp_Vector *vec_next; /* Function used to compare keys. */ Lisp_Object test; /* Nil if table is non-weak. Otherwise a symbol describing the weakness of the table. */ Lisp_Object weak; /* When the table is resized, and this is an integer, compute the new size by adding this to the old size. If a float, compute the new size by multiplying the old size with this factor. */ Lisp_Object rehash_size; /* Resize hash table when number of entries/ table size is >= this ratio, a float. */ Lisp_Object rehash_threshold; /* Vector of hash codes.. If hash[I] is nil, this means that that entry I is unused. */ Lisp_Object hash; /* Vector used to chain entries. If entry I is free, next[I] is the entry number of the next free item. If entry I is non-free, next[I] is the index of the next entry in the collision chain. */ Lisp_Object next; /* Index of first free entry in free list. */ Lisp_Object next_free; /* Bucket vector. A non-nil entry is the index of the first item in a collision chain. This vector's size can be larger than the hash table size to reduce collisions. */ Lisp_Object index; /* User-supplied hash function, or nil. */ Lisp_Object user_hash_function; /* User-supplied key comparison function, or nil. */ Lisp_Object user_cmp_function; /* Only the fields above are traced normally by the GC. The ones below `count' are special and are either ignored by the GC or traced in a special way (e.g. because of weakness). */ /* Number of key/value entries in the table. */ unsigned int count; /* Vector of keys and values. The key of item I is found at index 2 * I, the value is found at index 2 * I + 1. This is gc_marked specially if the table is weak. */ Lisp_Object key_and_value; /* Next weak hash table if this is a weak hash table. The head of the list is in weak_hash_tables. */ struct Lisp_Hash_Table *next_weak; /* C function to compare two keys. */ int (* cmpfn) (struct Lisp_Hash_Table *, Lisp_Object, unsigned, Lisp_Object, unsigned); /* C function to compute hash code. */ unsigned (* hashfn) (struct Lisp_Hash_Table *, Lisp_Object); }; #define XHASH_TABLE(OBJ) \ ((struct Lisp_Hash_Table *) XPNTR (OBJ)) #define XSET_HASH_TABLE(VAR, PTR) \ (XSETPSEUDOVECTOR (VAR, PTR, PVEC_HASH_TABLE)) #define HASH_TABLE_P(OBJ) PSEUDOVECTORP (OBJ, PVEC_HASH_TABLE) #define CHECK_HASH_TABLE(x) \ CHECK_TYPE (HASH_TABLE_P (x), Qhash_table_p, x) /* Value is the key part of entry IDX in hash table H. */ #define HASH_KEY(H, IDX) AREF ((H)->key_and_value, 2 * (IDX)) /* Value is the value part of entry IDX in hash table H. */ #define HASH_VALUE(H, IDX) AREF ((H)->key_and_value, 2 * (IDX) + 1) /* Value is the index of the next entry following the one at IDX in hash table H. */ #define HASH_NEXT(H, IDX) AREF ((H)->next, (IDX)) /* Value is the hash code computed for entry IDX in hash table H. */ #define HASH_HASH(H, IDX) AREF ((H)->hash, (IDX)) /* Value is the index of the element in hash table H that is the start of the collision list at index IDX in the index vector of H. */ #define HASH_INDEX(H, IDX) AREF ((H)->index, (IDX)) /* Value is the size of hash table H. */ #define HASH_TABLE_SIZE(H) XVECTOR ((H)->next)->size /* Default size for hash tables if not specified. */ #define DEFAULT_HASH_SIZE 65 /* Default threshold specifying when to resize a hash table. The value gives the ratio of current entries in the hash table and the size of the hash table. */ #define DEFAULT_REHASH_THRESHOLD 0.8 /* Default factor by which to increase the size of a hash table. */ #define DEFAULT_REHASH_SIZE 1.5 /* These structures are used for various misc types. */ struct Lisp_Misc_Any /* Supertype of all Misc types. */ { enum Lisp_Misc_Type type : 16; /* = Lisp_Misc_??? */ unsigned gcmarkbit : 1; int spacer : 15; /* Make it as long as "Lisp_Free without padding". */ void *fill; }; struct Lisp_Marker { enum Lisp_Misc_Type type : 16; /* = Lisp_Misc_Marker */ unsigned gcmarkbit : 1; int spacer : 13; /* This flag is temporarily used in the functions decode/encode_coding_object to record that the marker position must be adjusted after the conversion. */ unsigned int need_adjustment : 1; /* 1 means normal insertion at the marker's position leaves the marker after the inserted text. */ unsigned int insertion_type : 1; /* This is the buffer that the marker points into, or 0 if it points nowhere. Note: a chain of markers can contain markers pointing into different buffers (the chain is per buffer_text rather than per buffer, so it's shared between indirect buffers). */ /* This is used for (other than NULL-checking): - Fmarker_buffer - Fset_marker: check eq(oldbuf, newbuf) to avoid unchain+rechain. - unchain_marker: to find the list from which to unchain. - Fkill_buffer: to only unchain the markers of current indirect buffer. */ struct buffer *buffer; /* The remaining fields are meaningless in a marker that does not point anywhere. */ /* For markers that point somewhere, this is used to chain of all the markers in a given buffer. */ /* We could remove it and use an array in buffer_text instead. That would also allow to preserve it ordered. */ struct Lisp_Marker *next; /* This is the char position where the marker points. */ EMACS_INT charpos; /* This is the byte position. It's mostly used as a charpos<->bytepos cache (i.e. it's not directly used to implement the functionality of markers, but rather to (ab)use markers as a cache for char<->byte mappings). */ EMACS_INT bytepos; }; /* Forwarding pointer to an int variable. This is allowed only in the value cell of a symbol, and it means that the symbol's value really lives in the specified int variable. */ struct Lisp_Intfwd { enum Lisp_Fwd_Type type; /* = Lisp_Fwd_Int */ EMACS_INT *intvar; }; /* Boolean forwarding pointer to an int variable. This is like Lisp_Intfwd except that the ostensible "value" of the symbol is t if the int variable is nonzero, nil if it is zero. */ struct Lisp_Boolfwd { enum Lisp_Fwd_Type type; /* = Lisp_Fwd_Bool */ int *boolvar; }; /* Forwarding pointer to a Lisp_Object variable. This is allowed only in the value cell of a symbol, and it means that the symbol's value really lives in the specified variable. */ struct Lisp_Objfwd { enum Lisp_Fwd_Type type; /* = Lisp_Fwd_Obj */ Lisp_Object *objvar; }; /* Like Lisp_Objfwd except that value lives in a slot in the current buffer. Value is byte index of slot within buffer. */ struct Lisp_Buffer_Objfwd { enum Lisp_Fwd_Type type; /* = Lisp_Fwd_Buffer_Obj */ int offset; Lisp_Object slottype; /* Qnil, Lisp_Int, Lisp_Symbol, or Lisp_String. */ }; /* struct Lisp_Buffer_Local_Value is used in a symbol value cell when the symbol has buffer-local or frame-local bindings. (Exception: some buffer-local variables are built-in, with their values stored in the buffer structure itself. They are handled differently, using struct Lisp_Buffer_Objfwd.) The `realvalue' slot holds the variable's current value, or a forwarding pointer to where that value is kept. This value is the one that corresponds to the loaded binding. To read or set the variable, you must first make sure the right binding is loaded; then you can access the value in (or through) `realvalue'. `buffer' and `frame' are the buffer and frame for which the loaded binding was found. If those have changed, to make sure the right binding is loaded it is necessary to find which binding goes with the current buffer and selected frame, then load it. To load it, first unload the previous binding, then copy the value of the new binding into `realvalue' (or through it). Also update LOADED-BINDING to point to the newly loaded binding. `local_if_set' indicates that merely setting the variable creates a local binding for the current buffer. Otherwise the latter, setting the variable does not do that; only make-local-variable does that. */ struct Lisp_Buffer_Local_Value { /* 1 means that merely setting the variable creates a local binding for the current buffer */ unsigned int local_if_set : 1; /* 1 means this variable can have frame-local bindings, otherwise, it is can have buffer-local bindings. The two cannot be combined. */ unsigned int frame_local : 1; /* 1 means that the binding now loaded was found. Presumably equivalent to (defcell!=valcell) */ unsigned int found : 1; /* If non-NULL, a forwarding to the C var where it should also be set. */ union Lisp_Fwd *fwd; /* Should never be (Buffer|Kboard)_Objfwd. */ /* The buffer or frame for which the loaded binding was found. */ Lisp_Object where; /* A cons cell that holds the default value. It has the form (SYMBOL . DEFAULT-VALUE). */ Lisp_Object defcell; /* The cons cell from `where's parameter alist. It always has the form (SYMBOL . VALUE) Note that if `forward' is non-nil, VALUE may be out of date. Also if the currently loaded binding is the default binding, then this is `eq'ual to defcell. */ Lisp_Object valcell; }; #define BLV_FOUND(blv) \ (eassert ((blv)->found == !EQ ((blv)->defcell, (blv)->valcell)), (blv)->found) #define SET_BLV_FOUND(blv, v) \ (eassert ((v) == !EQ ((blv)->defcell, (blv)->valcell)), (blv)->found = (v)) #define BLV_VALUE(blv) (XCDR ((blv)->valcell)) #define SET_BLV_VALUE(blv, v) (XSETCDR ((blv)->valcell, v)) /* START and END are markers in the overlay's buffer, and PLIST is the overlay's property list. */ struct Lisp_Overlay /* An overlay's real data content is: - plist - buffer - insertion type of both ends - start & start_byte - end & end_byte - next (singly linked list of overlays). - start_next and end_next (singly linked list of markers). I.e. 9words plus 2 bits, 3words of which are for external linked lists. */ { enum Lisp_Misc_Type type : 16; /* = Lisp_Misc_Overlay */ unsigned gcmarkbit : 1; int spacer : 15; struct Lisp_Overlay *next; Lisp_Object start, end, plist; }; /* Like Lisp_Objfwd except that value lives in a slot in the current kboard. */ struct Lisp_Kboard_Objfwd { enum Lisp_Fwd_Type type; /* = Lisp_Fwd_Kboard_Obj */ int offset; }; /* Hold a C pointer for later use. This type of object is used in the arg to record_unwind_protect. */ struct Lisp_Save_Value { enum Lisp_Misc_Type type : 16; /* = Lisp_Misc_Save_Value */ unsigned gcmarkbit : 1; int spacer : 14; /* If DOGC is set, POINTER is the address of a memory area containing INTEGER potential Lisp_Objects. */ unsigned int dogc : 1; void *pointer; int integer; }; /* A miscellaneous object, when it's on the free list. */ struct Lisp_Free { enum Lisp_Misc_Type type : 16; /* = Lisp_Misc_Free */ unsigned gcmarkbit : 1; int spacer : 15; union Lisp_Misc *chain; #ifdef USE_LSB_TAG /* Try to make sure that sizeof(Lisp_Misc) preserves TYPEBITS-alignment. This assumes that Lisp_Marker is the largest of the alternatives and that Lisp_Misc_Any has the same size as "Lisp_Free w/o padding". */ char padding[((((sizeof (struct Lisp_Marker) - 1) >> GCTYPEBITS) + 1) << GCTYPEBITS) - sizeof (struct Lisp_Misc_Any)]; #endif }; /* To get the type field of a union Lisp_Misc, use XMISCTYPE. It uses one of these struct subtypes to get the type field. */ union Lisp_Misc { struct Lisp_Misc_Any u_any; /* Supertype of all Misc types. */ struct Lisp_Free u_free; /* Includes padding to force alignment. */ struct Lisp_Marker u_marker; /* 5 */ struct Lisp_Overlay u_overlay; /* 5 */ struct Lisp_Save_Value u_save_value; /* 3 */ }; union Lisp_Fwd { struct Lisp_Intfwd u_intfwd; /* 2 */ struct Lisp_Boolfwd u_boolfwd; /* 2 */ struct Lisp_Objfwd u_objfwd; /* 2 */ struct Lisp_Buffer_Objfwd u_buffer_objfwd; /* 2 */ struct Lisp_Kboard_Objfwd u_kboard_objfwd; /* 2 */ }; /* Lisp floating point type */ struct Lisp_Float { union { #ifdef HIDE_LISP_IMPLEMENTATION double data_; #else double data; #endif struct Lisp_Float *chain; } u; }; #ifdef HIDE_LISP_IMPLEMENTATION #define XFLOAT_DATA(f) (0 ? XFLOAT (f)->u.data_ : XFLOAT (f)->u.data_) #else #define XFLOAT_DATA(f) (0 ? XFLOAT (f)->u.data : XFLOAT (f)->u.data) /* This should be used only in alloc.c, which always disables HIDE_LISP_IMPLEMENTATION. */ #define XFLOAT_INIT(f,n) (XFLOAT (f)->u.data = (n)) #endif /* A character, declared with the following typedef, is a member of some character set associated with the current buffer. */ #ifndef _UCHAR_T /* Protect against something in ctab.h on AIX. */ #define _UCHAR_T typedef unsigned char UCHAR; #endif /* Meanings of slots in a Lisp_Compiled: */ #define COMPILED_ARGLIST 0 #define COMPILED_BYTECODE 1 #define COMPILED_CONSTANTS 2 #define COMPILED_STACK_DEPTH 3 #define COMPILED_DOC_STRING 4 #define COMPILED_INTERACTIVE 5 /* Flag bits in a character. These also get used in termhooks.h. Richard Stallman <rms@gnu.ai.mit.edu> thinks that MULE (MUlti-Lingual Emacs) might need 22 bits for the character value itself, so we probably shouldn't use any bits lower than 0x0400000. */ #define CHAR_ALT (0x0400000) #define CHAR_SUPER (0x0800000) #define CHAR_HYPER (0x1000000) #define CHAR_SHIFT (0x2000000) #define CHAR_CTL (0x4000000) #define CHAR_META (0x8000000) #define CHAR_MODIFIER_MASK \ (CHAR_ALT | CHAR_SUPER | CHAR_HYPER | CHAR_SHIFT | CHAR_CTL | CHAR_META) /* Actually, the current Emacs uses 22 bits for the character value itself. */ #define CHARACTERBITS 22 /* The maximum byte size consumed by push_key_description. All callers should assure that at least this size of memory is allocated at the place pointed by the second argument. There are 6 modifiers, each consumes 2 chars. The octal form of a character code consumes (1 + CHARACTERBITS / 3 + 1) chars (including backslash at the head). We need one more byte for string terminator `\0'. */ #define KEY_DESCRIPTION_SIZE ((2 * 6) + 1 + (CHARACTERBITS / 3) + 1 + 1) /* The glyph datatype, used to represent characters on the display. It consists of a char code and a face id. */ typedef struct { int ch; int face_id; } GLYPH; /* Return a glyph's character code. */ #define GLYPH_CHAR(glyph) ((glyph).ch) /* Return a glyph's face ID. */ #define GLYPH_FACE(glyph) ((glyph).face_id) #define SET_GLYPH_CHAR(glyph, char) ((glyph).ch = (char)) #define SET_GLYPH_FACE(glyph, face) ((glyph).face_id = (face)) #define SET_GLYPH(glyph, char, face) ((glyph).ch = (char), (glyph).face_id = (face)) /* Return 1 if GLYPH contains valid character code. */ #define GLYPH_CHAR_VALID_P(glyph) CHAR_VALID_P (GLYPH_CHAR (glyph), 1) /* Glyph Code from a display vector may either be an integer which encodes a char code in the lower CHARACTERBITS bits and a (very small) face-id in the upper bits, or it may be a cons (CHAR . FACE-ID). */ #define GLYPH_CODE_CHAR(gc) \ (CONSP (gc) ? XINT (XCAR (gc)) : INTEGERP (gc) ? (XINT (gc) & ((1 << CHARACTERBITS)-1)) : 0) #define GLYPH_CODE_FACE(gc) \ (CONSP (gc) ? XINT (XCDR (gc)) : INTEGERP (gc) ? (XINT (gc) >> CHARACTERBITS) : DEFAULT_FACE_ID) /* Return 1 if glyph code from display vector contains valid character code. */ #define GLYPH_CODE_CHAR_VALID_P(gc) CHAR_VALID_P (GLYPH_CODE_CHAR (gc), 1) #define GLYPH_CODE_P(gc) ((CONSP (gc) && INTEGERP (XCAR (gc)) && INTEGERP (XCDR (gc))) || INTEGERP (gc)) /* Only called when GLYPH_CODE_P (gc) is true. */ #define SET_GLYPH_FROM_GLYPH_CODE(glyph, gc) \ do \ { \ if (CONSP (gc)) \ SET_GLYPH (glyph, XINT (XCAR (gc)), XINT (XCDR (gc))); \ else \ SET_GLYPH (glyph, (XINT (gc) & ((1 << CHARACTERBITS)-1)), \ (XINT (gc) >> CHARACTERBITS)); \ } \ while (0) /* The ID of the mode line highlighting face. */ #define GLYPH_MODE_LINE_FACE 1 /* Data type checking */ #define NILP(x) EQ (x, Qnil) #define NUMBERP(x) (INTEGERP (x) || FLOATP (x)) #define NATNUMP(x) (INTEGERP (x) && XINT (x) >= 0) #define INTEGERP(x) (LISP_INT_TAG_P (XTYPE ((x)))) #define SYMBOLP(x) (XTYPE ((x)) == Lisp_Symbol) #define MISCP(x) (XTYPE ((x)) == Lisp_Misc) #define VECTORLIKEP(x) (XTYPE ((x)) == Lisp_Vectorlike) #define STRINGP(x) (XTYPE ((x)) == Lisp_String) #define CONSP(x) (XTYPE ((x)) == Lisp_Cons) #define FLOATP(x) (XTYPE ((x)) == Lisp_Float) #define VECTORP(x) (VECTORLIKEP (x) && !(XVECTOR (x)->size & PSEUDOVECTOR_FLAG)) #define OVERLAYP(x) (MISCP (x) && XMISCTYPE (x) == Lisp_Misc_Overlay) #define MARKERP(x) (MISCP (x) && XMISCTYPE (x) == Lisp_Misc_Marker) #define SAVE_VALUEP(x) (MISCP (x) && XMISCTYPE (x) == Lisp_Misc_Save_Value) #define INTFWDP(x) (XFWDTYPE (x) == Lisp_Fwd_Int) #define BOOLFWDP(x) (XFWDTYPE (x) == Lisp_Fwd_Bool) #define OBJFWDP(x) (XFWDTYPE (x) == Lisp_Fwd_Obj) #define BUFFER_OBJFWDP(x) (XFWDTYPE (x) == Lisp_Fwd_Buffer_Obj) #define KBOARD_OBJFWDP(x) (XFWDTYPE (x) == Lisp_Fwd_Kboard_Obj) /* True if object X is a pseudovector whose code is CODE. */ #define PSEUDOVECTORP(x, code) \ (VECTORLIKEP (x) \ && (((XVECTOR (x)->size & (PSEUDOVECTOR_FLAG | (code)))) \ == (PSEUDOVECTOR_FLAG | (code)))) /* Test for specific pseudovector types. */ #define WINDOW_CONFIGURATIONP(x) PSEUDOVECTORP (x, PVEC_WINDOW_CONFIGURATION) #define PROCESSP(x) PSEUDOVECTORP (x, PVEC_PROCESS) #define WINDOWP(x) PSEUDOVECTORP (x, PVEC_WINDOW) #define TERMINALP(x) PSEUDOVECTORP (x, PVEC_TERMINAL) #define SUBRP(x) PSEUDOVECTORP (x, PVEC_SUBR) #define COMPILEDP(x) PSEUDOVECTORP (x, PVEC_COMPILED) #define BUFFERP(x) PSEUDOVECTORP (x, PVEC_BUFFER) #define CHAR_TABLE_P(x) PSEUDOVECTORP (x, PVEC_CHAR_TABLE) #define SUB_CHAR_TABLE_P(x) PSEUDOVECTORP (x, PVEC_SUB_CHAR_TABLE) #define BOOL_VECTOR_P(x) PSEUDOVECTORP (x, PVEC_BOOL_VECTOR) #define FRAMEP(x) PSEUDOVECTORP (x, PVEC_FRAME) /* Test for image (image . spec) */ #define IMAGEP(x) (CONSP (x) && EQ (XCAR (x), Qimage)) /* Array types. */ #define ARRAYP(x) \ (VECTORP (x) || STRINGP (x) || CHAR_TABLE_P (x) || BOOL_VECTOR_P (x)) #define CHECK_LIST(x) \ CHECK_TYPE (CONSP (x) || NILP (x), Qlistp, x) #define CHECK_LIST_CONS(x, y) \ CHECK_TYPE (CONSP (x), Qlistp, y) #define CHECK_LIST_END(x, y) \ CHECK_TYPE (NILP (x), Qlistp, y) #define CHECK_STRING(x) \ CHECK_TYPE (STRINGP (x), Qstringp, x) #define CHECK_STRING_CAR(x) \ CHECK_TYPE (STRINGP (XCAR (x)), Qstringp, XCAR (x)) #define CHECK_CONS(x) \ CHECK_TYPE (CONSP (x), Qconsp, x) #define CHECK_SYMBOL(x) \ CHECK_TYPE (SYMBOLP (x), Qsymbolp, x) #define CHECK_CHAR_TABLE(x) \ CHECK_TYPE (CHAR_TABLE_P (x), Qchar_table_p, x) #define CHECK_VECTOR(x) \ CHECK_TYPE (VECTORP (x), Qvectorp, x) #define CHECK_VECTOR_OR_STRING(x) \ CHECK_TYPE (VECTORP (x) || STRINGP (x), Qarrayp, x) #define CHECK_ARRAY(x, Qxxxp) \ CHECK_TYPE (ARRAYP (x), Qxxxp, x) #define CHECK_VECTOR_OR_CHAR_TABLE(x) \ CHECK_TYPE (VECTORP (x) || CHAR_TABLE_P (x), Qvector_or_char_table_p, x) #define CHECK_BUFFER(x) \ CHECK_TYPE (BUFFERP (x), Qbufferp, x) #define CHECK_WINDOW(x) \ CHECK_TYPE (WINDOWP (x), Qwindowp, x) #define CHECK_WINDOW_CONFIGURATION(x) \ CHECK_TYPE (WINDOW_CONFIGURATIONP (x), Qwindow_configuration_p, x) /* This macro rejects windows on the interior of the window tree as "dead", which is what we want; this is an argument-checking macro, and the user should never get access to interior windows. A window of any sort, leaf or interior, is dead if the buffer, vchild, and hchild members are all nil. */ #define CHECK_LIVE_WINDOW(x) \ CHECK_TYPE (WINDOWP (x) && !NILP (XWINDOW (x)->buffer), Qwindow_live_p, x) #define CHECK_PROCESS(x) \ CHECK_TYPE (PROCESSP (x), Qprocessp, x) #define CHECK_SUBR(x) \ CHECK_TYPE (SUBRP (x), Qsubrp, x) #define CHECK_NUMBER(x) \ CHECK_TYPE (INTEGERP (x), Qintegerp, x) #define CHECK_NATNUM(x) \ CHECK_TYPE (NATNUMP (x), Qwholenump, x) #define CHECK_MARKER(x) \ CHECK_TYPE (MARKERP (x), Qmarkerp, x) #define CHECK_NUMBER_COERCE_MARKER(x) \ do { if (MARKERP ((x))) XSETFASTINT (x, marker_position (x)); \ else CHECK_TYPE (INTEGERP (x), Qinteger_or_marker_p, x); } while (0) #define XFLOATINT(n) extract_float((n)) #define CHECK_FLOAT(x) \ CHECK_TYPE (FLOATP (x), Qfloatp, x) #define CHECK_NUMBER_OR_FLOAT(x) \ CHECK_TYPE (FLOATP (x) || INTEGERP (x), Qnumberp, x) #define CHECK_NUMBER_OR_FLOAT_COERCE_MARKER(x) \ do { if (MARKERP (x)) XSETFASTINT (x, marker_position (x)); \ else CHECK_TYPE (INTEGERP (x) || FLOATP (x), Qnumber_or_marker_p, x); } while (0) #define CHECK_OVERLAY(x) \ CHECK_TYPE (OVERLAYP (x), Qoverlayp, x) /* Since we can't assign directly to the CAR or CDR fields of a cons cell, use these when checking that those fields contain numbers. */ #define CHECK_NUMBER_CAR(x) \ do { \ Lisp_Object tmp = XCAR (x); \ CHECK_NUMBER (tmp); \ XSETCAR ((x), tmp); \ } while (0) #define CHECK_NUMBER_CDR(x) \ do { \ Lisp_Object tmp = XCDR (x); \ CHECK_NUMBER (tmp); \ XSETCDR ((x), tmp); \ } while (0) #define CHECK_NATNUM_CAR(x) \ do { \ Lisp_Object tmp = XCAR (x); \ CHECK_NATNUM (tmp); \ XSETCAR ((x), tmp); \ } while (0) #define CHECK_NATNUM_CDR(x) \ do { \ Lisp_Object tmp = XCDR (x); \ CHECK_NATNUM (tmp); \ XSETCDR ((x), tmp); \ } while (0) /* Cast pointers to this type to compare them. Some machines want int. */ #define PNTR_COMPARISON_TYPE EMACS_UINT /* Define a built-in function for calling from Lisp. `lname' should be the name to give the function in Lisp, as a null-terminated C string. `fnname' should be the name of the function in C. By convention, it starts with F. `sname' should be the name for the C constant structure that records information on this function for internal use. By convention, it should be the same as `fnname' but with S instead of F. It's too bad that C macros can't compute this from `fnname'. `minargs' should be a number, the minimum number of arguments allowed. `maxargs' should be a number, the maximum number of arguments allowed, or else MANY or UNEVALLED. MANY means pass a vector of evaluated arguments, in the form of an integer number-of-arguments followed by the address of a vector of Lisp_Objects which contains the argument values. UNEVALLED means pass the list of unevaluated arguments `intspec' says how interactive arguments are to be fetched. If the string starts with a `(', `intspec' is evaluated and the resulting list is the list of arguments. If it's a string that doesn't start with `(', the value should follow the one of the doc string for `interactive'. A null string means call interactively with no arguments. `doc' is documentation for the user. */ /* This version of DEFUN declares a function prototype with the right arguments, so we can catch errors with maxargs at compile-time. */ #define DEFUN(lname, fnname, sname, minargs, maxargs, intspec, doc) \ Lisp_Object fnname DEFUN_ARGS_ ## maxargs ; \ DECL_ALIGN (struct Lisp_Subr, sname) = \ { PVEC_SUBR | (sizeof (struct Lisp_Subr) / sizeof (EMACS_INT)), \ { .a ## maxargs = fnname }, \ minargs, maxargs, lname, intspec, 0}; \ Lisp_Object fnname /* Note that the weird token-substitution semantics of ANSI C makes this work for MANY and UNEVALLED. */ #define DEFUN_ARGS_MANY (int, Lisp_Object *) #define DEFUN_ARGS_UNEVALLED (Lisp_Object) #define DEFUN_ARGS_0 (void) #define DEFUN_ARGS_1 (Lisp_Object) #define DEFUN_ARGS_2 (Lisp_Object, Lisp_Object) #define DEFUN_ARGS_3 (Lisp_Object, Lisp_Object, Lisp_Object) #define DEFUN_ARGS_4 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object) #define DEFUN_ARGS_5 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, \ Lisp_Object) #define DEFUN_ARGS_6 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, \ Lisp_Object, Lisp_Object) #define DEFUN_ARGS_7 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, \ Lisp_Object, Lisp_Object, Lisp_Object) #define DEFUN_ARGS_8 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, \ Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object) /* Non-zero if OBJ is a Lisp function. */ #define FUNCTIONP(OBJ) \ ((CONSP (OBJ) && EQ (XCAR (OBJ), Qlambda)) \ || (SYMBOLP (OBJ) && !NILP (Ffboundp (OBJ))) \ || COMPILEDP (OBJ) \ || SUBRP (OBJ)) /* defsubr (Sname); is how we define the symbol for function `name' at start-up time. */ extern void defsubr (struct Lisp_Subr *); #define MANY -2 #define UNEVALLED -1 extern void defvar_lisp (struct Lisp_Objfwd *, const char *, Lisp_Object *); extern void defvar_lisp_nopro (struct Lisp_Objfwd *, const char *, Lisp_Object *); extern void defvar_bool (struct Lisp_Boolfwd *, const char *, int *); extern void defvar_int (struct Lisp_Intfwd *, const char *, EMACS_INT *); extern void defvar_kboard (struct Lisp_Kboard_Objfwd *, const char *, int); /* Macros we use to define forwarded Lisp variables. These are used in the syms_of_FILENAME functions. */ #define DEFVAR_LISP(lname, vname, doc) \ do { \ static struct Lisp_Objfwd o_fwd; \ defvar_lisp (&o_fwd, lname, vname); \ } while (0) #define DEFVAR_LISP_NOPRO(lname, vname, doc) \ do { \ static struct Lisp_Objfwd o_fwd; \ defvar_lisp_nopro (&o_fwd, lname, vname); \ } while (0) #define DEFVAR_BOOL(lname, vname, doc) \ do { \ static struct Lisp_Boolfwd b_fwd; \ defvar_bool (&b_fwd, lname, vname); \ } while (0) #define DEFVAR_INT(lname, vname, doc) \ do { \ static struct Lisp_Intfwd i_fwd; \ defvar_int (&i_fwd, lname, vname); \ } while (0) #define DEFVAR_KBOARD(lname, vname, doc) \ do { \ static struct Lisp_Kboard_Objfwd ko_fwd; \ defvar_kboard (&ko_fwd, \ lname, \ (int)((char *)(¤t_kboard->vname) \ - (char *)current_kboard)); \ } while (0) /* Structure for recording Lisp call stack for backtrace purposes. */ /* The special binding stack holds the outer values of variables while they are bound by a function application or a let form, stores the code to be executed for Lisp unwind-protect forms, and stores the C functions to be called for record_unwind_protect. If func is non-zero, undoing this binding applies func to old_value; This implements record_unwind_protect. Otherwise, the element is a variable binding. If the symbol field is a symbol, it is an ordinary variable binding. Otherwise, it should be a structure (SYMBOL WHERE . CURRENT-BUFFER), which means having bound a local value while CURRENT-BUFFER was active. If WHERE is nil this means we saw the default value when binding SYMBOL. WHERE being a buffer or frame means we saw a buffer-local or frame-local value. Other values of WHERE mean an internal error. */ typedef Lisp_Object (*specbinding_func) (Lisp_Object); struct specbinding { Lisp_Object symbol, old_value; specbinding_func func; Lisp_Object unused; /* Dividing by 16 is faster than by 12 */ }; extern struct specbinding *specpdl; extern struct specbinding *specpdl_ptr; extern EMACS_INT specpdl_size; extern EMACS_INT max_specpdl_size; #define SPECPDL_INDEX() ((int) (specpdl_ptr - specpdl)) /* Everything needed to describe an active condition case. */ struct handler { /* The handler clauses and variable from the condition-case form. */ /* For a handler set up in Lisp code, this is always a list. For an internal handler set up by internal_condition_case*, this can instead be the symbol t or `error'. t: handle all conditions. error: handle all conditions, and errors can run the debugger or display a backtrace. */ Lisp_Object handler; Lisp_Object var; /* Fsignal stores here the condition-case clause that applies, and Fcondition_case thus knows which clause to run. */ Lisp_Object chosen_clause; /* Used to effect the longjump out to the handler. */ struct catchtag *tag; /* The next enclosing handler. */ struct handler *next; }; extern struct handler *handlerlist; /* This structure helps implement the `catch' and `throw' control structure. A struct catchtag contains all the information needed to restore the state of the interpreter after a non-local jump. Handlers for error conditions (represented by `struct handler' structures) just point to a catch tag to do the cleanup required for their jumps. catchtag structures are chained together in the C calling stack; the `next' member points to the next outer catchtag. A call like (throw TAG VAL) searches for a catchtag whose `tag' member is TAG, and then unbinds to it. The `val' member is used to hold VAL while the stack is unwound; `val' is returned as the value of the catch form. All the other members are concerned with restoring the interpreter state. */ struct catchtag { Lisp_Object tag; Lisp_Object val; struct catchtag *next; struct gcpro *gcpro; jmp_buf jmp; struct backtrace *backlist; struct handler *handlerlist; int lisp_eval_depth; int pdlcount; int poll_suppress_count; int interrupt_input_blocked; struct byte_stack *byte_stack; }; extern struct catchtag *catchlist; extern struct backtrace *backtrace_list; extern Lisp_Object memory_signal_data; /* An address near the bottom of the stack. Tells GC how to save a copy of the stack. */ extern char *stack_bottom; /* Check quit-flag and quit if it is non-nil. Typing C-g does not directly cause a quit; it only sets Vquit_flag. So the program needs to do QUIT at times when it is safe to quit. Every loop that might run for a long time or might not exit ought to do QUIT at least once, at a safe place. Unless that is impossible, of course. But it is very desirable to avoid creating loops where QUIT is impossible. Exception: if you set immediate_quit to nonzero, then the handler that responds to the C-g does the quit itself. This is a good thing to do around a loop that has no side effects and (in particular) cannot call arbitrary Lisp code. */ #ifdef SYNC_INPUT extern void process_pending_signals (void); extern int pending_signals; #define ELSE_PENDING_SIGNALS \ else if (pending_signals) \ process_pending_signals (); #else /* not SYNC_INPUT */ #define ELSE_PENDING_SIGNALS #endif /* not SYNC_INPUT */ #define QUIT \ do { \ if (!NILP (Vquit_flag) && NILP (Vinhibit_quit)) \ { \ Lisp_Object flag = Vquit_flag; \ Vquit_flag = Qnil; \ if (EQ (Vthrow_on_input, flag)) \ Fthrow (Vthrow_on_input, Qt); \ Fsignal (Qquit, Qnil); \ } \ ELSE_PENDING_SIGNALS \ } while (0) /* Nonzero if ought to quit now. */ #define QUITP (!NILP (Vquit_flag) && NILP (Vinhibit_quit)) /* Variables used locally in the following case handling macros. */ extern int case_temp1; extern Lisp_Object case_temp2; /* Current buffer's map from characters to lower-case characters. */ #define DOWNCASE_TABLE current_buffer->downcase_table /* Current buffer's map from characters to upper-case characters. */ #define UPCASE_TABLE current_buffer->upcase_table /* Downcase a character, or make no change if that cannot be done. */ #define DOWNCASE(CH) \ ((case_temp1 = (CH), \ case_temp2 = CHAR_TABLE_REF (DOWNCASE_TABLE, case_temp1), \ NATNUMP (case_temp2)) \ ? XFASTINT (case_temp2) : case_temp1) /* 1 if CH is upper case. */ #define UPPERCASEP(CH) (DOWNCASE (CH) != (CH)) /* 1 if CH is neither upper nor lower case. */ #define NOCASEP(CH) (UPCASE1 (CH) == (CH)) /* 1 if CH is lower case. */ #define LOWERCASEP(CH) (!UPPERCASEP (CH) && !NOCASEP(CH)) /* Upcase a character, or make no change if that cannot be done. */ #define UPCASE(CH) (!UPPERCASEP (CH) ? UPCASE1 (CH) : (CH)) /* Upcase a character known to be not upper case. */ #define UPCASE1(CH) \ ((case_temp1 = (CH), \ case_temp2 = CHAR_TABLE_REF (UPCASE_TABLE, case_temp1), \ NATNUMP (case_temp2)) \ ? XFASTINT (case_temp2) : case_temp1) extern Lisp_Object Vascii_downcase_table, Vascii_upcase_table; extern Lisp_Object Vascii_canon_table, Vascii_eqv_table; /* Number of bytes of structure consed since last GC. */ extern int consing_since_gc; /* Thresholds for doing another gc. */ extern EMACS_INT gc_cons_threshold; extern EMACS_INT gc_relative_threshold; extern EMACS_INT memory_full_cons_threshold; /* Structure for recording stack slots that need marking. */ /* This is a chain of structures, each of which points at a Lisp_Object variable whose value should be marked in garbage collection. Normally every link of the chain is an automatic variable of a function, and its `val' points to some argument or local variable of the function. On exit to the function, the chain is set back to the value it had on entry. This way, no link remains in the chain when the stack frame containing the link disappears. Every function that can call Feval must protect in this fashion all Lisp_Object variables whose contents will be used again. */ extern struct gcpro *gcprolist; struct gcpro { struct gcpro *next; /* Address of first protected variable. */ volatile Lisp_Object *var; /* Number of consecutive protected variables. */ int nvars; #ifdef DEBUG_GCPRO int level; #endif }; /* Values of GC_MARK_STACK during compilation: 0 Use GCPRO as before 1 Do the real thing, make GCPROs and UNGCPRO no-ops. 2 Mark the stack, and check that everything GCPRO'd is marked. 3 Mark using GCPRO's, mark stack last, and count how many dead objects are kept alive. */ #define GC_USE_GCPROS_AS_BEFORE 0 #define GC_MAKE_GCPROS_NOOPS 1 #define GC_MARK_STACK_CHECK_GCPROS 2 #define GC_USE_GCPROS_CHECK_ZOMBIES 3 #ifndef GC_MARK_STACK #define GC_MARK_STACK GC_USE_GCPROS_AS_BEFORE #endif #if GC_MARK_STACK == GC_MAKE_GCPROS_NOOPS /* Do something silly with gcproN vars just so gcc shuts up. */ /* You get warnings from MIPSPro... */ #define GCPRO1(varname) ((void) gcpro1) #define GCPRO2(varname1, varname2)(((void) gcpro2, (void) gcpro1)) #define GCPRO3(varname1, varname2, varname3) \ (((void) gcpro3, (void) gcpro2, (void) gcpro1)) #define GCPRO4(varname1, varname2, varname3, varname4) \ (((void) gcpro4, (void) gcpro3, (void) gcpro2, (void) gcpro1)) #define GCPRO5(varname1, varname2, varname3, varname4, varname5) \ (((void) gcpro5, (void) gcpro4, (void) gcpro3, (void) gcpro2, (void) gcpro1)) #define GCPRO6(varname1, varname2, varname3, varname4, varname5, varname6) \ (((void) gcpro6, (void) gcpro5, (void) gcpro4, (void) gcpro3, (void) gcpro2, (void) gcpro1)) #define UNGCPRO ((void) 0) #else /* GC_MARK_STACK != GC_MAKE_GCPROS_NOOPS */ #ifndef DEBUG_GCPRO #define GCPRO1(varname) \ {gcpro1.next = gcprolist; gcpro1.var = &varname; gcpro1.nvars = 1; \ gcprolist = &gcpro1; } #define GCPRO2(varname1, varname2) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcprolist = &gcpro2; } #define GCPRO3(varname1, varname2, varname3) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcprolist = &gcpro3; } #define GCPRO4(varname1, varname2, varname3, varname4) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro4.next = &gcpro3; gcpro4.var = &varname4; gcpro4.nvars = 1; \ gcprolist = &gcpro4; } #define GCPRO5(varname1, varname2, varname3, varname4, varname5) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro4.next = &gcpro3; gcpro4.var = &varname4; gcpro4.nvars = 1; \ gcpro5.next = &gcpro4; gcpro5.var = &varname5; gcpro5.nvars = 1; \ gcprolist = &gcpro5; } #define GCPRO6(varname1, varname2, varname3, varname4, varname5, varname6) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro4.next = &gcpro3; gcpro4.var = &varname4; gcpro4.nvars = 1; \ gcpro5.next = &gcpro4; gcpro5.var = &varname5; gcpro5.nvars = 1; \ gcpro6.next = &gcpro5; gcpro6.var = &varname6; gcpro6.nvars = 1; \ gcprolist = &gcpro6; } #define UNGCPRO (gcprolist = gcpro1.next) #else extern int gcpro_level; #define GCPRO1(varname) \ {gcpro1.next = gcprolist; gcpro1.var = &varname; gcpro1.nvars = 1; \ gcpro1.level = gcpro_level++; \ gcprolist = &gcpro1; } #define GCPRO2(varname1, varname2) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro1.level = gcpro_level; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro2.level = gcpro_level++; \ gcprolist = &gcpro2; } #define GCPRO3(varname1, varname2, varname3) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro1.level = gcpro_level; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro3.level = gcpro_level++; \ gcprolist = &gcpro3; } #define GCPRO4(varname1, varname2, varname3, varname4) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro1.level = gcpro_level; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro4.next = &gcpro3; gcpro4.var = &varname4; gcpro4.nvars = 1; \ gcpro4.level = gcpro_level++; \ gcprolist = &gcpro4; } #define GCPRO5(varname1, varname2, varname3, varname4, varname5) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro1.level = gcpro_level; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro4.next = &gcpro3; gcpro4.var = &varname4; gcpro4.nvars = 1; \ gcpro5.next = &gcpro4; gcpro5.var = &varname5; gcpro5.nvars = 1; \ gcpro5.level = gcpro_level++; \ gcprolist = &gcpro5; } #define GCPRO6(varname1, varname2, varname3, varname4, varname5, varname6) \ {gcpro1.next = gcprolist; gcpro1.var = &varname1; gcpro1.nvars = 1; \ gcpro1.level = gcpro_level; \ gcpro2.next = &gcpro1; gcpro2.var = &varname2; gcpro2.nvars = 1; \ gcpro3.next = &gcpro2; gcpro3.var = &varname3; gcpro3.nvars = 1; \ gcpro4.next = &gcpro3; gcpro4.var = &varname4; gcpro4.nvars = 1; \ gcpro5.next = &gcpro4; gcpro5.var = &varname5; gcpro5.nvars = 1; \ gcpro6.next = &gcpro5; gcpro6.var = &varname6; gcpro6.nvars = 1; \ gcpro6.level = gcpro_level++; \ gcprolist = &gcpro6; } #define UNGCPRO \ ((--gcpro_level != gcpro1.level) \ ? (abort (), 0) \ : ((gcprolist = gcpro1.next), 0)) #endif /* DEBUG_GCPRO */ #endif /* GC_MARK_STACK != GC_MAKE_GCPROS_NOOPS */ /* Evaluate expr, UNGCPRO, and then return the value of expr. */ #define RETURN_UNGCPRO(expr) \ do \ { \ Lisp_Object ret_ungc_val; \ ret_ungc_val = (expr); \ UNGCPRO; \ return ret_ungc_val; \ } \ while (0) /* Call staticpro (&var) to protect static variable `var'. */ void staticpro (Lisp_Object *); /* Declare a Lisp-callable function. The MAXARGS parameter has the same meaning as in the DEFUN macro, and is used to construct a prototype. */ /* We can use the same trick as in the DEFUN macro to generate the appropriate prototype. */ #define EXFUN(fnname, maxargs) \ extern Lisp_Object fnname DEFUN_ARGS_ ## maxargs /* Forward declarations for prototypes. */ struct window; struct frame; /* Defined in data.c */ extern Lisp_Object Qnil, Qt, Qquote, Qlambda, Qsubr, Qunbound; extern Lisp_Object Qerror_conditions, Qerror_message, Qtop_level; extern Lisp_Object Qerror, Qquit, Qwrong_type_argument, Qargs_out_of_range; extern Lisp_Object Qvoid_variable, Qvoid_function; extern Lisp_Object Qsetting_constant, Qinvalid_read_syntax; extern Lisp_Object Qinvalid_function, Qwrong_number_of_arguments, Qno_catch; extern Lisp_Object Qend_of_file, Qarith_error, Qmark_inactive; extern Lisp_Object Qbeginning_of_buffer, Qend_of_buffer, Qbuffer_read_only; extern Lisp_Object Qtext_read_only; extern Lisp_Object Qinteractive_form; extern Lisp_Object Qcircular_list; extern Lisp_Object Qintegerp, Qnatnump, Qwholenump, Qsymbolp, Qlistp, Qconsp; extern Lisp_Object Qstringp, Qarrayp, Qsequencep, Qbufferp; extern Lisp_Object Qchar_or_string_p, Qmarkerp, Qinteger_or_marker_p, Qvectorp; extern Lisp_Object Qbuffer_or_string_p; extern Lisp_Object Qboundp, Qfboundp; extern Lisp_Object Qchar_table_p, Qvector_or_char_table_p; extern Lisp_Object Qcdr; extern Lisp_Object Qrange_error, Qdomain_error, Qsingularity_error; extern Lisp_Object Qoverflow_error, Qunderflow_error; extern Lisp_Object Qfloatp; extern Lisp_Object Qnumberp, Qnumber_or_marker_p; extern Lisp_Object Qinteger; extern Lisp_Object Qfont_spec, Qfont_entity, Qfont_object; extern void circular_list_error (Lisp_Object) NO_RETURN; EXFUN (Finteractive_form, 1); EXFUN (Fbyteorder, 0); /* Defined in frame.c */ extern Lisp_Object Qframep; EXFUN (Feq, 2); EXFUN (Fnull, 1); EXFUN (Flistp, 1); EXFUN (Fconsp, 1); EXFUN (Fatom, 1); EXFUN (Fnlistp, 1); EXFUN (Fintegerp, 1); EXFUN (Fnatnump, 1); EXFUN (Fsymbolp, 1); EXFUN (Fvectorp, 1); EXFUN (Fstringp, 1); EXFUN (Fmultibyte_string_p, 1); EXFUN (Farrayp, 1); EXFUN (Fsequencep, 1); EXFUN (Fbufferp, 1); EXFUN (Fmarkerp, 1); EXFUN (Fsubrp, 1); EXFUN (Fchar_or_string_p, 1); EXFUN (Finteger_or_marker_p, 1); EXFUN (Ffloatp, 1); EXFUN (Finteger_or_floatp, 1); EXFUN (Finteger_or_float_or_marker_p, 1); EXFUN (Fcar, 1); EXFUN (Fcar_safe, 1); EXFUN (Fcdr, 1); EXFUN (Fcdr_safe, 1); EXFUN (Fsetcar, 2); EXFUN (Fsetcdr, 2); EXFUN (Fboundp, 1); EXFUN (Ffboundp, 1); EXFUN (Fmakunbound, 1); EXFUN (Ffmakunbound, 1); EXFUN (Fsymbol_function, 1); EXFUN (Fsymbol_plist, 1); EXFUN (Fsymbol_name, 1); extern Lisp_Object indirect_function (Lisp_Object); EXFUN (Findirect_function, 2); EXFUN (Ffset, 2); EXFUN (Fsetplist, 2); EXFUN (Fsymbol_value, 1); extern Lisp_Object find_symbol_value (Lisp_Object); EXFUN (Fset, 2); EXFUN (Fdefault_value, 1); EXFUN (Fset_default, 2); EXFUN (Fdefault_boundp, 1); EXFUN (Fmake_local_variable, 1); EXFUN (Flocal_variable_p, 2); EXFUN (Flocal_variable_if_set_p, 2); EXFUN (Faref, 2); EXFUN (Faset, 3); EXFUN (Fstring_to_number, 2); EXFUN (Fnumber_to_string, 1); EXFUN (Feqlsign, 2); EXFUN (Fgtr, 2); EXFUN (Flss, 2); EXFUN (Fgeq, 2); EXFUN (Fleq, 2); EXFUN (Fneq, 2); EXFUN (Fzerop, 1); EXFUN (Fplus, MANY); EXFUN (Fminus, MANY); EXFUN (Ftimes, MANY); EXFUN (Fquo, MANY); EXFUN (Frem, 2); EXFUN (Fmax, MANY); EXFUN (Fmin, MANY); EXFUN (Flogand, MANY); EXFUN (Flogior, MANY); EXFUN (Flogxor, MANY); EXFUN (Flognot, 1); EXFUN (Flsh, 2); EXFUN (Fash, 2); EXFUN (Fadd1, 1); EXFUN (Fsub1, 1); EXFUN (Fmake_variable_buffer_local, 1); extern struct Lisp_Symbol *indirect_variable (struct Lisp_Symbol *); extern Lisp_Object long_to_cons (unsigned long); extern unsigned long cons_to_long (Lisp_Object); extern void args_out_of_range (Lisp_Object, Lisp_Object) NO_RETURN; extern void args_out_of_range_3 (Lisp_Object, Lisp_Object, Lisp_Object) NO_RETURN; extern Lisp_Object wrong_type_argument (Lisp_Object, Lisp_Object) NO_RETURN; extern Lisp_Object do_symval_forwarding (union Lisp_Fwd *); extern void set_internal (Lisp_Object, Lisp_Object, Lisp_Object, int); extern void syms_of_data (void); extern void init_data (void); extern void swap_in_global_binding (struct Lisp_Symbol *); /* Defined in cmds.c */ EXFUN (Fend_of_line, 1); EXFUN (Fforward_char, 1); EXFUN (Fforward_line, 1); extern void syms_of_cmds (void); extern void keys_of_cmds (void); /* Defined in coding.c */ EXFUN (Fcoding_system_p, 1); EXFUN (Fcoding_system_base, 1); EXFUN (Fcoding_system_eol_type, 1); EXFUN (Fcheck_coding_system, 1); EXFUN (Fread_coding_system, 2); EXFUN (Fread_non_nil_coding_system, 1); EXFUN (Ffind_operation_coding_system, MANY); EXFUN (Fupdate_coding_systems_internal, 0); EXFUN (Fencode_coding_string, 4); EXFUN (Fdecode_coding_string, 4); extern Lisp_Object detect_coding_system (const unsigned char *, EMACS_INT, EMACS_INT, int, int, Lisp_Object); extern void init_coding (void); extern void init_coding_once (void); extern void syms_of_coding (void); /* Defined in character.c */ extern void init_character_once (void); extern void syms_of_character (void); EXFUN (Funibyte_char_to_multibyte, 1); /* Defined in charset.c */ EXFUN (Fchar_bytes, 1); EXFUN (Fchar_width, 1); EXFUN (Fstring, MANY); extern EMACS_INT chars_in_text (const unsigned char *, EMACS_INT); extern EMACS_INT multibyte_chars_in_text (const unsigned char *, EMACS_INT); extern int multibyte_char_to_unibyte (int, Lisp_Object); extern int multibyte_char_to_unibyte_safe (int); extern Lisp_Object Qcharset; extern void init_charset (void); extern void init_charset_once (void); extern void syms_of_charset (void); /* Structure forward declarations. */ struct charset; /* Defined in composite.c */ extern void syms_of_composite (void); /* Defined in syntax.c */ EXFUN (Fforward_word, 1); EXFUN (Fskip_chars_forward, 2); EXFUN (Fskip_chars_backward, 2); EXFUN (Fsyntax_table_p, 1); EXFUN (Fsyntax_table, 0); EXFUN (Fset_syntax_table, 1); extern void init_syntax_once (void); extern void syms_of_syntax (void); /* Defined in fns.c */ extern Lisp_Object QCrehash_size, QCrehash_threshold; extern int use_dialog_box; extern int use_file_dialog; extern int next_almost_prime (int); extern Lisp_Object larger_vector (Lisp_Object, int, Lisp_Object); extern void sweep_weak_hash_tables (void); extern Lisp_Object Qcursor_in_echo_area; extern Lisp_Object Qstring_lessp; extern Lisp_Object Vfeatures; extern Lisp_Object QCsize, QCtest, QCweakness, Qequal, Qeq, Qeql; unsigned sxhash (Lisp_Object, int); Lisp_Object make_hash_table (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); Lisp_Object copy_hash_table (struct Lisp_Hash_Table *); int hash_lookup (struct Lisp_Hash_Table *, Lisp_Object, unsigned *); int hash_put (struct Lisp_Hash_Table *, Lisp_Object, Lisp_Object, unsigned); void hash_clear (struct Lisp_Hash_Table *); void init_weak_hash_tables (void); extern void init_fns (void); EXFUN (Fsxhash, 1); EXFUN (Fmake_hash_table, MANY); EXFUN (Fmakehash, 1); EXFUN (Fcopy_hash_table, 1); EXFUN (Fhash_table_count, 1); EXFUN (Fhash_table_rehash_size, 1); EXFUN (Fhash_table_rehash_threshold, 1); EXFUN (Fhash_table_size, 1); EXFUN (Fhash_table_test, 1); EXFUN (Fhash_table_weak, 1); EXFUN (Fhash_table_p, 1); EXFUN (Fclrhash, 1); EXFUN (Fgethash, 3); EXFUN (Fputhash, 3); EXFUN (Fremhash, 2); EXFUN (Fmaphash, 2); EXFUN (Fdefine_hash_table_test, 3); EXFUN (Fidentity, 1); EXFUN (Frandom, 1); EXFUN (Flength, 1); EXFUN (Fsafe_length, 1); EXFUN (Fappend, MANY); EXFUN (Fconcat, MANY); EXFUN (Fvconcat, MANY); EXFUN (Fcopy_sequence, 1); EXFUN (Fstring_make_multibyte, 1); EXFUN (Fstring_make_unibyte, 1); EXFUN (Fstring_as_multibyte, 1); EXFUN (Fstring_as_unibyte, 1); EXFUN (Fstring_to_multibyte, 1); EXFUN (Fstring_to_unibyte, 1); EXFUN (Fsubstring, 3); extern Lisp_Object substring_both (Lisp_Object, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT); EXFUN (Fnth, 2); EXFUN (Fnthcdr, 2); EXFUN (Fmemq, 2); EXFUN (Fassq, 2); EXFUN (Fassoc, 2); EXFUN (Felt, 2); EXFUN (Fmember, 2); EXFUN (Frassq, 2); EXFUN (Fdelq, 2); EXFUN (Fdelete, 2); EXFUN (Fsort, 2); EXFUN (Freverse, 1); EXFUN (Fnreverse, 1); EXFUN (Fget, 2); EXFUN (Fput, 3); EXFUN (Fequal, 2); EXFUN (Ffillarray, 2); EXFUN (Fnconc, MANY); EXFUN (Fmapcar, 2); EXFUN (Fmapconcat, 3); extern Lisp_Object do_yes_or_no_p (Lisp_Object); EXFUN (Frequire, 3); EXFUN (Fprovide, 2); extern Lisp_Object concat2 (Lisp_Object, Lisp_Object); extern Lisp_Object concat3 (Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object nconc2 (Lisp_Object, Lisp_Object); extern Lisp_Object assq_no_quit (Lisp_Object, Lisp_Object); extern Lisp_Object assoc_no_quit (Lisp_Object, Lisp_Object); extern void clear_string_char_byte_cache (void); extern EMACS_INT string_char_to_byte (Lisp_Object, EMACS_INT); extern EMACS_INT string_byte_to_char (Lisp_Object, EMACS_INT); extern Lisp_Object string_make_multibyte (Lisp_Object); extern Lisp_Object string_to_multibyte (Lisp_Object); extern Lisp_Object string_make_unibyte (Lisp_Object); EXFUN (Fcopy_alist, 1); EXFUN (Fplist_get, 2); EXFUN (Fplist_put, 3); EXFUN (Fplist_member, 2); EXFUN (Frassoc, 2); EXFUN (Fstring_equal, 2); EXFUN (Fcompare_strings, 7); EXFUN (Fstring_lessp, 2); extern void syms_of_fns (void); /* Defined in floatfns.c */ extern double extract_float (Lisp_Object); EXFUN (Ffloat, 1); EXFUN (Ftruncate, 2); extern void init_floatfns (void); extern void syms_of_floatfns (void); extern Lisp_Object fmod_float (Lisp_Object x, Lisp_Object y); /* Defined in fringe.c */ extern void syms_of_fringe (void); extern void init_fringe (void); extern void init_fringe_once (void); /* Defined in image.c */ extern Lisp_Object QCascent, QCmargin, QCrelief, Qcount, Qextension_data; extern Lisp_Object QCconversion, QCcolor_symbols, QCheuristic_mask; extern Lisp_Object QCindex, QCmatrix, QCcolor_adjustment, QCmask; EXFUN (Finit_image_library, 2); extern void syms_of_image (void); extern void init_image (void); /* Defined in insdel.c */ extern Lisp_Object Qinhibit_modification_hooks; extern void move_gap (EMACS_INT); extern void move_gap_both (EMACS_INT, EMACS_INT); extern void make_gap (EMACS_INT); extern EMACS_INT copy_text (const unsigned char *, unsigned char *, EMACS_INT, int, int); extern EMACS_INT count_size_as_multibyte (const unsigned char *, EMACS_INT); extern int count_combining_before (const unsigned char *, EMACS_INT, EMACS_INT, EMACS_INT); extern int count_combining_after (const unsigned char *, EMACS_INT, EMACS_INT, EMACS_INT); extern void insert (const unsigned char *, EMACS_INT); extern void insert_and_inherit (const unsigned char *, EMACS_INT); extern void insert_1 (const unsigned char *, EMACS_INT, int, int, int); extern void insert_1_both (const unsigned char *, EMACS_INT, EMACS_INT, int, int, int); extern void insert_from_gap (EMACS_INT, EMACS_INT); extern void insert_from_string (Lisp_Object, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, int); extern void insert_from_buffer (struct buffer *, EMACS_INT, EMACS_INT, int); extern void insert_char (int); extern void insert_string (const char *); extern void insert_before_markers (const unsigned char *, EMACS_INT); extern void insert_before_markers_and_inherit (const unsigned char *, EMACS_INT); extern void insert_from_string_before_markers (Lisp_Object, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, int); extern void del_range (EMACS_INT, EMACS_INT); extern Lisp_Object del_range_1 (EMACS_INT, EMACS_INT, int, int); extern void del_range_byte (EMACS_INT, EMACS_INT, int); extern void del_range_both (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, int); extern Lisp_Object del_range_2 (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, int); extern void modify_region (struct buffer *, EMACS_INT, EMACS_INT, int); extern void prepare_to_modify_buffer (EMACS_INT, EMACS_INT, EMACS_INT *); extern void signal_before_change (EMACS_INT, EMACS_INT, EMACS_INT *); extern void signal_after_change (EMACS_INT, EMACS_INT, EMACS_INT); extern void adjust_after_replace (EMACS_INT, EMACS_INT, Lisp_Object, EMACS_INT, EMACS_INT); extern void adjust_after_replace_noundo (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT); extern void adjust_after_insert (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT); extern void adjust_markers_for_delete (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT); extern void replace_range (EMACS_INT, EMACS_INT, Lisp_Object, int, int, int); extern void replace_range_2 (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, const char *, EMACS_INT, EMACS_INT, int); extern void syms_of_insdel (void); /* Defined in dispnew.c */ extern Lisp_Object selected_frame; extern Lisp_Object Vwindow_system_version; extern EMACS_INT baud_rate; EXFUN (Fding, 1); EXFUN (Fredraw_frame, 1); EXFUN (Fredraw_display, 0); EXFUN (Fsleep_for, 2); EXFUN (Fredisplay, 1); extern Lisp_Object sit_for (Lisp_Object, int, int); extern void init_display (void); extern void syms_of_display (void); /* Defined in xdisp.c */ extern Lisp_Object Qinhibit_point_motion_hooks; extern Lisp_Object Qinhibit_redisplay, Qdisplay; extern Lisp_Object Qinhibit_eval_during_redisplay; extern Lisp_Object Qmessage_truncate_lines; extern Lisp_Object Qmenu_bar_update_hook; extern Lisp_Object Qwindow_scroll_functions, Vwindow_scroll_functions; extern Lisp_Object Qoverriding_local_map, Qoverriding_terminal_local_map; extern Lisp_Object Qimage, Qtext, Qboth, Qboth_horiz, Qtext_image_horiz; extern Lisp_Object Qspace, Qcenter, QCalign_to; extern Lisp_Object Qbar, Qhbar, Qbox, Qhollow; extern Lisp_Object Qleft_margin, Qright_margin; extern Lisp_Object Vmessage_log_max; extern Lisp_Object QCdata, QCfile; extern Lisp_Object QCmap; extern Lisp_Object Qrisky_local_variable; extern Lisp_Object Vinhibit_redisplay; extern int message_enable_multibyte; extern int noninteractive_need_newline; extern EMACS_INT scroll_margin; extern Lisp_Object echo_area_buffer[2]; extern void add_to_log (const char *, Lisp_Object, Lisp_Object); extern void check_message_stack (void); extern void setup_echo_area_for_printing (int); extern int push_message (void); extern Lisp_Object pop_message_unwind (Lisp_Object); extern Lisp_Object restore_message_unwind (Lisp_Object); extern void pop_message (void); extern void restore_message (void); extern Lisp_Object current_message (void); extern void set_message (const char *s, Lisp_Object, EMACS_INT, int); extern void clear_message (int, int); extern void message (const char *, ...); extern void message_nolog (const char *, ...); extern void message1 (const char *); extern void message1_nolog (const char *); extern void message2 (const char *, EMACS_INT, int); extern void message2_nolog (const char *, EMACS_INT, int); extern void message3 (Lisp_Object, EMACS_INT, int); extern void message3_nolog (Lisp_Object, EMACS_INT, int); extern void message_dolog (const char *, EMACS_INT, int, int); extern void message_with_string (const char *, Lisp_Object, int); extern void message_log_maybe_newline (void); extern void update_echo_area (void); extern void truncate_echo_area (EMACS_INT); extern void redisplay (void); extern int check_point_in_composition (struct buffer *, EMACS_INT, struct buffer *, EMACS_INT); extern void redisplay_preserve_echo_area (int); extern void prepare_menu_bars (void); void set_frame_cursor_types (struct frame *, Lisp_Object); extern void syms_of_xdisp (void); extern void init_xdisp (void); extern Lisp_Object safe_eval (Lisp_Object); extern int pos_visible_p (struct window *, EMACS_INT, int *, int *, int *, int *, int *, int *); /* Defined in xsettings.c */ extern void syms_of_xsettings (void); /* Defined in vm-limit.c. */ extern void memory_warnings (POINTER_TYPE *, void (*warnfun) (const char *)); /* Defined in alloc.c */ extern void check_pure_size (void); extern void allocate_string_data (struct Lisp_String *, EMACS_INT, EMACS_INT); extern void reset_malloc_hooks (void); extern void uninterrupt_malloc (void); extern void malloc_warning (const char *); extern void memory_full (void) NO_RETURN; extern void buffer_memory_full (void) NO_RETURN; extern int survives_gc_p (Lisp_Object); extern void mark_object (Lisp_Object); extern Lisp_Object Vpurify_flag; extern Lisp_Object Vmemory_full; extern Lisp_Object *stack_base; EXFUN (Fcons, 2); EXFUN (list1, 1); EXFUN (list2, 2); EXFUN (list3, 3); EXFUN (list4, 4); EXFUN (list5, 5); EXFUN (Flist, MANY); EXFUN (Fmake_list, 2); extern Lisp_Object allocate_misc (void); EXFUN (Fmake_vector, 2); EXFUN (Fvector, MANY); EXFUN (Fmake_symbol, 1); EXFUN (Fmake_marker, 0); EXFUN (Fmake_string, 2); extern Lisp_Object build_string (const char *); extern Lisp_Object make_string (const char *, EMACS_INT); extern Lisp_Object make_unibyte_string (const char *, EMACS_INT); extern Lisp_Object make_multibyte_string (const char *, EMACS_INT, EMACS_INT); extern Lisp_Object make_event_array (int, Lisp_Object *); extern Lisp_Object make_uninit_string (EMACS_INT); extern Lisp_Object make_uninit_multibyte_string (EMACS_INT, EMACS_INT); extern Lisp_Object make_string_from_bytes (const char *, EMACS_INT, EMACS_INT); extern Lisp_Object make_specified_string (const char *, EMACS_INT, EMACS_INT, int); EXFUN (Fpurecopy, 1); extern Lisp_Object make_pure_string (const char *, EMACS_INT, EMACS_INT, int); extern Lisp_Object make_pure_c_string (const char *data); extern Lisp_Object pure_cons (Lisp_Object, Lisp_Object); extern Lisp_Object make_pure_vector (EMACS_INT); EXFUN (Fgarbage_collect, 0); EXFUN (Fmake_byte_code, MANY); EXFUN (Fmake_bool_vector, 2); extern Lisp_Object Qchar_table_extra_slots; extern struct Lisp_Vector *allocate_vector (EMACS_INT); extern struct Lisp_Vector *allocate_pseudovector (int memlen, int lisplen, EMACS_INT tag); #define ALLOCATE_PSEUDOVECTOR(typ,field,tag) \ ((typ*) \ allocate_pseudovector \ (VECSIZE (typ), PSEUDOVECSIZE (typ, field), tag)) extern struct Lisp_Hash_Table *allocate_hash_table (void); extern struct window *allocate_window (void); extern struct frame *allocate_frame (void); extern struct Lisp_Process *allocate_process (void); extern struct terminal *allocate_terminal (void); extern int gc_in_progress; extern int abort_on_gc; extern Lisp_Object make_float (double); extern void display_malloc_warning (void); extern int inhibit_garbage_collection (void); extern Lisp_Object make_save_value (void *, int); extern void free_misc (Lisp_Object); extern void free_marker (Lisp_Object); extern void free_cons (struct Lisp_Cons *); extern void init_alloc_once (void); extern void init_alloc (void); extern void syms_of_alloc (void); extern struct buffer * allocate_buffer (void); extern int valid_lisp_object_p (Lisp_Object); /* Defined in chartab.c */ EXFUN (Fmake_char_table, 2); EXFUN (Fchar_table_parent, 1); EXFUN (Fset_char_table_parent, 2); EXFUN (Fchar_table_extra_slot, 2); EXFUN (Fset_char_table_extra_slot, 3); EXFUN (Fchar_table_range, 2); EXFUN (Fset_char_table_range, 3); EXFUN (Fset_char_table_default, 3); EXFUN (Foptimize_char_table, 2); EXFUN (Fmap_char_table, 2); extern Lisp_Object copy_char_table (Lisp_Object); extern Lisp_Object sub_char_table_ref (Lisp_Object, int); extern Lisp_Object char_table_ref (Lisp_Object, int); extern Lisp_Object char_table_ref_and_range (Lisp_Object, int, int *, int *); extern Lisp_Object char_table_set (Lisp_Object, int, Lisp_Object); extern Lisp_Object char_table_set_range (Lisp_Object, int, int, Lisp_Object); extern int char_table_translate (Lisp_Object, int); extern void map_char_table (void (*) (Lisp_Object, Lisp_Object, Lisp_Object), Lisp_Object, Lisp_Object, Lisp_Object); extern void map_char_table_for_charset (void (*c_function) (Lisp_Object, Lisp_Object), Lisp_Object, Lisp_Object, Lisp_Object, struct charset *, unsigned, unsigned); extern void syms_of_chartab (void); /* Defined in print.c */ extern Lisp_Object Vprin1_to_string_buffer; extern Lisp_Object Vprint_level, Vprint_length; extern void debug_print (Lisp_Object); EXFUN (Fprin1, 2); EXFUN (Fprin1_to_string, 2); EXFUN (Fprinc, 2); EXFUN (Fterpri, 1); EXFUN (Fprint, 2); EXFUN (Ferror_message_string, 1); extern Lisp_Object Vstandard_output, Qstandard_output; extern Lisp_Object Qexternal_debugging_output; extern void temp_output_buffer_setup (const char *); extern int print_level, print_escape_newlines; extern Lisp_Object Qprint_escape_newlines; extern void write_string (const char *, int); extern void write_string_1 (const char *, int, Lisp_Object); extern void print_error_message (Lisp_Object, Lisp_Object, const char *, Lisp_Object); extern Lisp_Object internal_with_output_to_temp_buffer (const char *, Lisp_Object (*) (Lisp_Object), Lisp_Object); extern void float_to_string (unsigned char *, double); extern void syms_of_print (void); /* Defined in doprnt.c */ extern EMACS_INT doprnt (char *, int, const char *, const char *, va_list); /* Defined in lread.c */ extern Lisp_Object Vafter_load_alist; extern Lisp_Object Qvariable_documentation, Qstandard_input; extern Lisp_Object Qbackquote, Qcomma, Qcomma_at, Qcomma_dot, Qfunction; extern Lisp_Object Vobarray, initial_obarray, Vstandard_input; extern int load_in_progress; EXFUN (Fread, 1); EXFUN (Fread_from_string, 3); EXFUN (Fintern, 2); EXFUN (Fintern_soft, 2); EXFUN (Fload, 5); EXFUN (Fget_load_suffixes, 0); EXFUN (Fget_file_char, 0); EXFUN (Fread_char, 3); EXFUN (Fread_event, 3); extern Lisp_Object read_filtered_event (int, int, int, int, Lisp_Object); EXFUN (Feval_region, 4); extern Lisp_Object check_obarray (Lisp_Object); extern Lisp_Object intern (const char *); extern Lisp_Object intern_c_string (const char *); extern Lisp_Object make_symbol (const char *); extern Lisp_Object oblookup (Lisp_Object, const char *, EMACS_INT, EMACS_INT); #define LOADHIST_ATTACH(x) \ do { \ if (initialized) Vcurrent_load_list = Fcons (x, Vcurrent_load_list); \ } while (0) extern Lisp_Object Vcurrent_load_list; extern Lisp_Object Vload_history, Vload_suffixes, Vload_file_rep_suffixes; extern int openp (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object *, Lisp_Object); extern int isfloat_string (const char *, int); extern void map_obarray (Lisp_Object, void (*) (Lisp_Object, Lisp_Object), Lisp_Object); extern void dir_warning (const char *, Lisp_Object); extern void close_load_descs (void); extern void init_obarray (void); extern void init_lread (void); extern void syms_of_lread (void); /* Defined in eval.c */ extern Lisp_Object Qautoload, Qexit, Qinteractive, Qcommandp, Qdefun, Qmacro; extern Lisp_Object Vinhibit_quit, Qinhibit_quit, Vquit_flag; extern Lisp_Object Vautoload_queue; extern Lisp_Object Vdebug_on_error; extern Lisp_Object Vsignaling_function; extern int handling_signal; extern int debug_on_next_call; extern int interactive_p (int); /* To run a normal hook, use the appropriate function from the list below. The calling convention: if (!NILP (Vrun_hooks)) call1 (Vrun_hooks, Qmy_funny_hook); should no longer be used. */ extern Lisp_Object Vrun_hooks; EXFUN (Frun_hooks, MANY); EXFUN (Frun_hook_with_args, MANY); EXFUN (Frun_hook_with_args_until_success, MANY); EXFUN (Frun_hook_with_args_until_failure, MANY); extern Lisp_Object run_hook_list_with_args (Lisp_Object, int, Lisp_Object *); extern void run_hook_with_args_2 (Lisp_Object, Lisp_Object, Lisp_Object); EXFUN (Fand, UNEVALLED); EXFUN (For, UNEVALLED); EXFUN (Fif, UNEVALLED); EXFUN (Fprogn, UNEVALLED); EXFUN (Fprog1, UNEVALLED); EXFUN (Fprog2, UNEVALLED); EXFUN (Fsetq, UNEVALLED); EXFUN (Fquote, UNEVALLED); EXFUN (Fuser_variable_p, 1); EXFUN (Finteractive_p, 0); EXFUN (Fdefun, UNEVALLED); EXFUN (Flet, UNEVALLED); EXFUN (FletX, UNEVALLED); EXFUN (Fwhile, UNEVALLED); EXFUN (Fcatch, UNEVALLED); EXFUN (Fthrow, 2) NO_RETURN; EXFUN (Funwind_protect, UNEVALLED); EXFUN (Fcondition_case, UNEVALLED); EXFUN (Fsignal, 2); extern void xsignal (Lisp_Object, Lisp_Object) NO_RETURN; extern void xsignal0 (Lisp_Object) NO_RETURN; extern void xsignal1 (Lisp_Object, Lisp_Object) NO_RETURN; extern void xsignal2 (Lisp_Object, Lisp_Object, Lisp_Object) NO_RETURN; extern void xsignal3 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object) NO_RETURN; extern void signal_error (const char *, Lisp_Object) NO_RETURN; EXFUN (Fautoload, 5); EXFUN (Fcommandp, 2); EXFUN (Feval, 1); EXFUN (Fapply, MANY); EXFUN (Ffuncall, MANY); EXFUN (Fbacktrace, 0); extern Lisp_Object apply1 (Lisp_Object, Lisp_Object); extern Lisp_Object call0 (Lisp_Object); extern Lisp_Object call1 (Lisp_Object, Lisp_Object); extern Lisp_Object call2 (Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object call3 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object call4 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object call5 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object call6 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object call7 (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); EXFUN (Fdo_auto_save, 2); extern Lisp_Object apply_lambda (Lisp_Object, Lisp_Object, int); extern Lisp_Object internal_catch (Lisp_Object, Lisp_Object (*) (Lisp_Object), Lisp_Object); extern Lisp_Object internal_lisp_condition_case (Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object internal_condition_case (Lisp_Object (*) (void), Lisp_Object, Lisp_Object (*) (Lisp_Object)); extern Lisp_Object internal_condition_case_1 (Lisp_Object (*) (Lisp_Object), Lisp_Object, Lisp_Object, Lisp_Object (*) (Lisp_Object)); extern Lisp_Object internal_condition_case_2 (Lisp_Object (*) (Lisp_Object, Lisp_Object), Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object (*) (Lisp_Object)); extern Lisp_Object internal_condition_case_n (Lisp_Object (*) (int, Lisp_Object *), int, Lisp_Object *, Lisp_Object, Lisp_Object (*) (Lisp_Object)); extern void specbind (Lisp_Object, Lisp_Object); extern void record_unwind_protect (Lisp_Object (*) (Lisp_Object), Lisp_Object); extern Lisp_Object unbind_to (int, Lisp_Object); extern void error (const char *, ...) NO_RETURN; extern void verror (const char *, va_list) NO_RETURN; extern void do_autoload (Lisp_Object, Lisp_Object); extern Lisp_Object un_autoload (Lisp_Object); EXFUN (Ffetch_bytecode, 1); extern void init_eval_once (void); extern Lisp_Object safe_call (int, Lisp_Object *); extern Lisp_Object safe_call1 (Lisp_Object, Lisp_Object); extern Lisp_Object safe_call2 (Lisp_Object, Lisp_Object, Lisp_Object); extern void init_eval (void); extern void syms_of_eval (void); /* Defined in editfns.c */ extern Lisp_Object last_nonmenu_event; extern Lisp_Object Qfield; extern Lisp_Object Vinhibit_field_text_motion; extern Lisp_Object Vsystem_name; extern Lisp_Object Vuser_login_name; EXFUN (Fpropertize, MANY); EXFUN (Fcurrent_message, 0); EXFUN (Fgoto_char, 1); EXFUN (Fpoint_min_marker, 0); EXFUN (Fpoint_max_marker, 0); EXFUN (Fpoint_min, 0); EXFUN (Fpoint_max, 0); EXFUN (Fpoint, 0); EXFUN (Fpoint_marker, 0); EXFUN (Fmark_marker, 0); EXFUN (Fline_beginning_position, 1); EXFUN (Fline_end_position, 1); EXFUN (Ffollowing_char, 0); EXFUN (Fprevious_char, 0); EXFUN (Fchar_after, 1); EXFUN (Finsert, MANY); EXFUN (Finsert_and_inherit, MANY); EXFUN (Finsert_before_markers, MANY); EXFUN (Finsert_buffer_substring, 3); EXFUN (Finsert_char, 3); extern void insert1 (Lisp_Object); EXFUN (Feolp, 0); EXFUN (Feobp, 0); EXFUN (Fbolp, 0); EXFUN (Fbobp, 0); EXFUN (Fformat, MANY); EXFUN (Fmessage, MANY); extern Lisp_Object format2 (const char *, Lisp_Object, Lisp_Object); EXFUN (Fbuffer_substring, 2); EXFUN (Fbuffer_string, 0); extern Lisp_Object save_excursion_save (void); extern Lisp_Object save_restriction_save (void); extern Lisp_Object save_excursion_restore (Lisp_Object); extern Lisp_Object save_restriction_restore (Lisp_Object); EXFUN (Fchar_to_string, 1); EXFUN (Fdelete_region, 2); EXFUN (Fnarrow_to_region, 2); EXFUN (Fwiden, 0); EXFUN (Fuser_login_name, 1); EXFUN (Fsystem_name, 0); EXFUN (Fcurrent_time, 0); extern EMACS_INT clip_to_bounds (EMACS_INT, EMACS_INT, EMACS_INT); extern Lisp_Object make_buffer_string (EMACS_INT, EMACS_INT, int); extern Lisp_Object make_buffer_string_both (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, int); extern void init_editfns (void); extern void syms_of_editfns (void); EXFUN (Fconstrain_to_field, 5); EXFUN (Ffield_string, 1); EXFUN (Fdelete_field, 1); EXFUN (Ffield_beginning, 3); EXFUN (Ffield_end, 3); EXFUN (Ffield_string_no_properties, 1); extern void set_time_zone_rule (const char *); /* Defined in buffer.c */ extern int mouse_face_overlay_overlaps (Lisp_Object); extern void nsberror (Lisp_Object) NO_RETURN; EXFUN (Fset_buffer_multibyte, 1); EXFUN (Foverlay_start, 1); EXFUN (Foverlay_end, 1); EXFUN (Foverlay_buffer, 1); extern void adjust_overlays_for_insert (EMACS_INT, EMACS_INT); extern void adjust_overlays_for_delete (EMACS_INT, EMACS_INT); extern void fix_start_end_in_overlays (EMACS_INT, EMACS_INT); extern void report_overlay_modification (Lisp_Object, Lisp_Object, int, Lisp_Object, Lisp_Object, Lisp_Object); extern int overlay_touches_p (EMACS_INT); extern Lisp_Object Vbuffer_alist, Vinhibit_read_only; EXFUN (Fbuffer_list, 1); EXFUN (Fget_buffer, 1); EXFUN (Fget_buffer_create, 1); EXFUN (Fgenerate_new_buffer_name, 2); EXFUN (Fset_buffer, 1); EXFUN (set_buffer_if_live, 1); EXFUN (Fbarf_if_buffer_read_only, 0); EXFUN (Fcurrent_buffer, 0); EXFUN (Fswitch_to_buffer, 2); EXFUN (Fother_buffer, 3); EXFUN (Foverlay_get, 2); EXFUN (Fbuffer_modified_p, 1); EXFUN (Fset_buffer_modified_p, 1); EXFUN (Fkill_buffer, 1); EXFUN (Fkill_all_local_variables, 0); EXFUN (Fbuffer_disable_undo, 1); EXFUN (Fbuffer_enable_undo, 1); EXFUN (Ferase_buffer, 0); extern Lisp_Object Qoverlayp; extern Lisp_Object Qpriority, Qwindow, Qevaporate, Qbefore_string, Qafter_string; extern Lisp_Object get_truename_buffer (Lisp_Object); extern struct buffer *all_buffers; EXFUN (Fprevious_overlay_change, 1); EXFUN (Fbuffer_file_name, 1); extern void init_buffer_once (void); extern void init_buffer (void); extern void syms_of_buffer (void); extern void keys_of_buffer (void); /* Defined in marker.c */ EXFUN (Fmarker_position, 1); EXFUN (Fmarker_buffer, 1); EXFUN (Fcopy_marker, 2); EXFUN (Fset_marker, 3); extern EMACS_INT marker_position (Lisp_Object); extern EMACS_INT marker_byte_position (Lisp_Object); extern void clear_charpos_cache (struct buffer *); extern EMACS_INT charpos_to_bytepos (EMACS_INT); extern EMACS_INT buf_charpos_to_bytepos (struct buffer *, EMACS_INT); extern EMACS_INT buf_bytepos_to_charpos (struct buffer *, EMACS_INT); extern void unchain_marker (struct Lisp_Marker *marker); extern Lisp_Object set_marker_restricted (Lisp_Object, Lisp_Object, Lisp_Object); extern Lisp_Object set_marker_both (Lisp_Object, Lisp_Object, EMACS_INT, EMACS_INT); extern Lisp_Object set_marker_restricted_both (Lisp_Object, Lisp_Object, EMACS_INT, EMACS_INT); extern void syms_of_marker (void); /* Defined in fileio.c */ extern Lisp_Object Qfile_error; extern Lisp_Object Qfile_exists_p; extern Lisp_Object Qfile_directory_p; extern Lisp_Object Qinsert_file_contents; extern Lisp_Object Vauto_save_list_file_name; EXFUN (Ffind_file_name_handler, 2); EXFUN (Ffile_name_as_directory, 1); EXFUN (Fmake_temp_name, 1); EXFUN (Fexpand_file_name, 2); EXFUN (Ffile_name_nondirectory, 1); EXFUN (Fsubstitute_in_file_name, 1); EXFUN (Ffile_symlink_p, 1); EXFUN (Fverify_visited_file_modtime, 1); EXFUN (Ffile_exists_p, 1); EXFUN (Ffile_name_absolute_p, 1); EXFUN (Fdirectory_file_name, 1); EXFUN (Ffile_name_directory, 1); extern Lisp_Object expand_and_dir_to_file (Lisp_Object, Lisp_Object); EXFUN (Ffile_accessible_directory_p, 1); EXFUN (Funhandled_file_name_directory, 1); EXFUN (Ffile_directory_p, 1); EXFUN (Fwrite_region, 7); EXFUN (Ffile_readable_p, 1); EXFUN (Ffile_executable_p, 1); EXFUN (Fread_file_name, 6); extern Lisp_Object close_file_unwind (Lisp_Object); extern Lisp_Object restore_point_unwind (Lisp_Object); extern void report_file_error (const char *, Lisp_Object) NO_RETURN; extern int internal_delete_file (Lisp_Object); extern void syms_of_fileio (void); extern Lisp_Object make_temp_name (Lisp_Object, int); EXFUN (Fmake_symbolic_link, 3); extern Lisp_Object Qdelete_file; /* Defined in abbrev.c */ extern void syms_of_abbrev (void); /* Defined in search.c */ extern void shrink_regexp_cache (void); EXFUN (Fstring_match, 3); extern void restore_search_regs (void); EXFUN (Fmatch_data, 3); EXFUN (Fset_match_data, 2); EXFUN (Fmatch_beginning, 1); EXFUN (Fmatch_end, 1); extern void record_unwind_save_match_data (void); EXFUN (Flooking_at, 1); extern int fast_string_match (Lisp_Object, Lisp_Object); extern int fast_c_string_match_ignore_case (Lisp_Object, const char *); extern int fast_string_match_ignore_case (Lisp_Object, Lisp_Object); extern EMACS_INT fast_looking_at (Lisp_Object, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, Lisp_Object); extern EMACS_INT scan_buffer (int, EMACS_INT, EMACS_INT, EMACS_INT, int *, int); extern EMACS_INT scan_newline (EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, EMACS_INT, int); extern EMACS_INT find_next_newline (EMACS_INT, int); extern EMACS_INT find_next_newline_no_quit (EMACS_INT, EMACS_INT); extern EMACS_INT find_before_next_newline (EMACS_INT, EMACS_INT, EMACS_INT); extern void syms_of_search (void); extern void clear_regexp_cache (void); /* Defined in minibuf.c */ extern Lisp_Object Qcompletion_ignore_case; extern Lisp_Object Vcompletion_regexp_list; extern Lisp_Object Vhistory_length; extern Lisp_Object Vminibuffer_list; extern Lisp_Object last_minibuf_string; extern int completion_ignore_case; extern int history_delete_duplicates; extern int minibuffer_auto_raise; extern void choose_minibuf_frame (void); EXFUN (Fcompleting_read, 8); EXFUN (Fread_from_minibuffer, 7); EXFUN (Fread_variable, 2); EXFUN (Fread_buffer, 3); EXFUN (Fread_minibuffer, 2); EXFUN (Feval_minibuffer, 2); EXFUN (Fread_string, 5); EXFUN (Fread_no_blanks_input, 3); EXFUN (Fassoc_string, 3); extern Lisp_Object get_minibuffer (int); extern void temp_echo_area_glyphs (Lisp_Object); extern void init_minibuf_once (void); extern void syms_of_minibuf (void); /* Defined in callint.c */ extern Lisp_Object Qminus, Qplus, Vcurrent_prefix_arg; extern Lisp_Object Qwhen; extern Lisp_Object Vcommand_history; extern Lisp_Object Vmark_even_if_inactive; extern Lisp_Object Qcall_interactively, Qmouse_leave_buffer_hook; EXFUN (Fcall_interactively, 3); EXFUN (Fprefix_numeric_value, 1); extern void syms_of_callint (void); /* Defined in casefiddle.c */ extern Lisp_Object Qidentity; EXFUN (Fdowncase, 1); EXFUN (Fupcase, 1); EXFUN (Fcapitalize, 1); EXFUN (Fupcase_region, 2); EXFUN (Fupcase_initials, 1); EXFUN (Fupcase_initials_region, 2); extern void syms_of_casefiddle (void); extern void keys_of_casefiddle (void); /* Defined in casetab.c */ EXFUN (Fset_case_table, 1); EXFUN (Fset_standard_case_table, 1); extern void init_casetab_once (void); extern void syms_of_casetab (void); /* Defined in keyboard.c */ extern int echoing; extern Lisp_Object echo_message_buffer; extern struct kboard *echo_kboard; extern void cancel_echoing (void); extern Lisp_Object Qdisabled, QCfilter; extern Lisp_Object Qabove_handle, Qhandle, Qbelow_handle; extern Lisp_Object Qup, Qdown, Qbottom, Qend_scroll; extern Lisp_Object Qtop, Qratio; extern Lisp_Object Vtty_erase_char, Vhelp_form, Vtop_level; extern Lisp_Object Vthrow_on_input; extern int input_pending; EXFUN (Fdiscard_input, 0); EXFUN (Frecursive_edit, 0); EXFUN (Ftop_level, 0) NO_RETURN; EXFUN (Fexit_recursive_edit, 0) NO_RETURN; EXFUN (Fabort_recursive_edit, 0) NO_RETURN; EXFUN (Fcommand_execute, 4); EXFUN (Finput_pending_p, 0); extern Lisp_Object menu_bar_items (Lisp_Object); extern Lisp_Object tool_bar_items (Lisp_Object, int *); extern Lisp_Object Qvertical_scroll_bar; extern void discard_mouse_events (void); EXFUN (Fevent_convert_list, 1); EXFUN (Fread_key_sequence, 5); EXFUN (Fset_input_interrupt_mode, 1); EXFUN (Fset_output_flow_control, 2); EXFUN (Fset_input_meta_mode, 2); EXFUN (Fset_quit_char, 1); EXFUN (Fset_input_mode, 4); extern Lisp_Object pending_funcalls; extern int detect_input_pending (void); extern int detect_input_pending_ignore_squeezables (void); extern int detect_input_pending_run_timers (int); extern void safe_run_hooks (Lisp_Object); extern void cmd_error_internal (Lisp_Object, const char *); extern Lisp_Object command_loop_1 (void); extern Lisp_Object recursive_edit_1 (void); extern void record_auto_save (void); extern void init_keyboard (void); extern void syms_of_keyboard (void); extern void keys_of_keyboard (void); extern char *push_key_description (unsigned int, char *, int); /* Defined in indent.c */ EXFUN (Fvertical_motion, 2); EXFUN (Findent_to, 2); EXFUN (Fcurrent_column, 0); EXFUN (Fmove_to_column, 2); extern double current_column (void); extern void invalidate_current_column (void); extern int indented_beyond_p (EMACS_INT, EMACS_INT, double); extern void syms_of_indent (void); /* Defined in frame.c */ #ifdef HAVE_WINDOW_SYSTEM extern Lisp_Object Vx_resource_name; extern Lisp_Object Vx_resource_class; #endif /* HAVE_WINDOW_SYSTEM */ extern Lisp_Object Qonly; extern Lisp_Object Qvisible; extern void store_frame_param (struct frame *, Lisp_Object, Lisp_Object); extern void store_in_alist (Lisp_Object *, Lisp_Object, Lisp_Object); extern Lisp_Object do_switch_frame (Lisp_Object, int, int, Lisp_Object); extern Lisp_Object get_frame_param (struct frame *, Lisp_Object); extern Lisp_Object frame_buffer_predicate (Lisp_Object); EXFUN (Fframep, 1); EXFUN (Fselect_frame, 2); EXFUN (Fselected_frame, 0); EXFUN (Fwindow_frame, 1); EXFUN (Fframe_root_window, 1); EXFUN (Fframe_first_window, 1); EXFUN (Fframe_selected_window, 1); EXFUN (Fframe_list, 0); EXFUN (Fnext_frame, 2); EXFUN (Fdelete_frame, 2); EXFUN (Fset_mouse_position, 3); EXFUN (Fmake_frame_visible, 1); EXFUN (Fmake_frame_invisible, 2); EXFUN (Ficonify_frame, 1); EXFUN (Fframe_visible_p, 1); EXFUN (Fvisible_frame_list, 0); EXFUN (Fframe_parameter, 2); EXFUN (Fframe_parameters, 1); EXFUN (Fmodify_frame_parameters, 2); EXFUN (Fset_frame_height, 3); EXFUN (Fset_frame_width, 3); EXFUN (Fset_frame_size, 3); EXFUN (Fset_frame_position, 3); EXFUN (Fraise_frame, 1); EXFUN (Fredirect_frame_focus, 2); EXFUN (Fset_frame_selected_window, 3); extern Lisp_Object frame_buffer_list (Lisp_Object); extern void frames_discard_buffer (Lisp_Object); extern void set_frame_buffer_list (Lisp_Object, Lisp_Object); extern void frames_bury_buffer (Lisp_Object); extern void syms_of_frame (void); /* Defined in emacs.c */ extern char **initial_argv; extern int initial_argc; #if defined(HAVE_X_WINDOWS) || defined(HAVE_NS) extern int display_arg; #endif extern Lisp_Object decode_env_path (const char *, const char *); extern Lisp_Object Vinvocation_name, Vinvocation_directory; extern Lisp_Object Vbefore_init_time, Vafter_init_time; extern Lisp_Object Vinstallation_directory; extern Lisp_Object empty_unibyte_string, empty_multibyte_string; extern Lisp_Object Qfile_name_handler_alist; extern Lisp_Object Vdynamic_library_alist; extern void (*fatal_error_signal_hook) (void); EXFUN (Fkill_emacs, 1) NO_RETURN; #if HAVE_SETLOCALE void fixup_locale (void); void synchronize_system_messages_locale (void); void synchronize_system_time_locale (void); #else #define setlocale(category, locale) #define fixup_locale() #define synchronize_system_messages_locale() #define synchronize_system_time_locale() #endif void shut_down_emacs (int, int, Lisp_Object); /* Nonzero means don't do interactive redisplay and don't change tty modes. */ extern int noninteractive; /* Nonzero means don't load X resources or Windows Registry settings. */ extern int inhibit_x_resources; /* Pipe used to send exit notification to the daemon parent at startup. */ extern int daemon_pipe[2]; #define IS_DAEMON (daemon_pipe[1] != 0) /* Nonzero means don't do use window-system-specific display code. */ extern int inhibit_window_system; /* Nonzero means that a filter or a sentinel is running. */ extern int running_asynch_code; /* Defined in process.c */ extern Lisp_Object QCtype, Qlocal; EXFUN (Fget_process, 1); EXFUN (Fget_buffer_process, 1); EXFUN (Fprocessp, 1); EXFUN (Fprocess_status, 1); EXFUN (Fkill_process, 2); EXFUN (Fprocess_send_eof, 1); EXFUN (Fwaiting_for_user_input_p, 0); extern Lisp_Object Qprocessp; extern void kill_buffer_processes (Lisp_Object); extern int wait_reading_process_output (int, int, int, int, Lisp_Object, struct Lisp_Process *, int); extern void add_keyboard_wait_descriptor (int); extern void delete_keyboard_wait_descriptor (int); extern void add_gpm_wait_descriptor (int); extern void delete_gpm_wait_descriptor (int); extern void close_process_descs (void); extern void init_process (void); extern void syms_of_process (void); extern void setup_process_coding_systems (Lisp_Object); /* Defined in callproc.c */ extern Lisp_Object Vexec_path, Vexec_suffixes, Vexec_directory, Vdata_directory; extern Lisp_Object Vdoc_directory; extern Lisp_Object Vshell_file_name; EXFUN (Fcall_process, MANY); extern int child_setup (int, int, int, char **, int, Lisp_Object); extern void init_callproc_1 (void); extern void init_callproc (void); extern void set_initial_environment (void); extern void syms_of_callproc (void); /* Defined in doc.c */ extern Lisp_Object Qfunction_documentation; extern Lisp_Object Vdoc_file_name; EXFUN (Fsubstitute_command_keys, 1); EXFUN (Fdocumentation, 2); EXFUN (Fdocumentation_property, 3); extern Lisp_Object read_doc_string (Lisp_Object); extern Lisp_Object get_doc_string (Lisp_Object, int, int); extern void syms_of_doc (void); extern int read_bytecode_char (int); /* Defined in bytecode.c */ extern Lisp_Object Qbytecode; EXFUN (Fbyte_code, 3); extern void syms_of_bytecode (void); extern struct byte_stack *byte_stack_list; extern void mark_byte_stack (void); extern void unmark_byte_stack (void); /* Defined in macros.c */ extern Lisp_Object Qexecute_kbd_macro; EXFUN (Fexecute_kbd_macro, 3); EXFUN (Fcancel_kbd_macro_events, 0); extern void init_macros (void); extern void syms_of_macros (void); /* Defined in undo.c */ extern Lisp_Object Qapply; extern Lisp_Object Qinhibit_read_only; EXFUN (Fundo_boundary, 0); extern void truncate_undo_list (struct buffer *); extern void record_marker_adjustment (Lisp_Object, EMACS_INT); extern void record_insert (EMACS_INT, EMACS_INT); extern void record_delete (EMACS_INT, Lisp_Object); extern void record_first_change (void); extern void record_change (EMACS_INT, EMACS_INT); extern void record_property_change (EMACS_INT, EMACS_INT, Lisp_Object, Lisp_Object, Lisp_Object); extern void syms_of_undo (void); extern Lisp_Object Vundo_outer_limit; /* Defined in textprop.c */ extern Lisp_Object Qfont, Qmouse_face; extern Lisp_Object Qinsert_in_front_hooks, Qinsert_behind_hooks; extern Lisp_Object Qfront_sticky, Qrear_nonsticky; extern Lisp_Object Qminibuffer_prompt; EXFUN (Fnext_single_property_change, 4); EXFUN (Fnext_single_char_property_change, 4); EXFUN (Fprevious_single_property_change, 4); EXFUN (Fget_text_property, 3); EXFUN (Fput_text_property, 5); EXFUN (Fprevious_char_property_change, 2); EXFUN (Fnext_char_property_change, 2); extern void report_interval_modification (Lisp_Object, Lisp_Object); extern Lisp_Object next_single_char_property_change (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object); /* Defined in menu.c */ extern void syms_of_menu (void); /* Defined in xmenu.c */ EXFUN (Fx_popup_menu, 2); EXFUN (Fx_popup_dialog, 3); extern void syms_of_xmenu (void); /* Defined in termchar.h */ struct tty_display_info; /* Defined in termhooks.h */ struct terminal; /* Defined in sysdep.c */ #ifndef HAVE_GET_CURRENT_DIR_NAME extern char *get_current_dir_name (void); #endif extern void stuff_char (char c); extern void init_sigio (int); extern void sys_subshell (void); extern void sys_suspend (void); extern void discard_tty_input (void); extern void init_sys_modes (struct tty_display_info *); extern void reset_sys_modes (struct tty_display_info *); extern void init_all_sys_modes (void); extern void reset_all_sys_modes (void); extern void wait_for_termination (int); extern void flush_pending_output (int); extern void child_setup_tty (int); extern void setup_pty (int); extern int set_window_size (int, int, int); extern void create_process (Lisp_Object, char **, Lisp_Object); extern int emacs_open (const char *, int, int); extern int emacs_close (int); extern int emacs_read (int, char *, unsigned int); extern int emacs_write (int, const char *, unsigned int); #ifndef HAVE_MEMSET extern void *memset (void *, int, size_t); #endif #ifndef HAVE_MEMCPY extern void *memcpy (void *, void *, size_t); #endif #ifndef HAVE_MEMMOVE extern void *memmove (void *, void *, size_t); #endif #ifndef HAVE_MEMCMP extern int memcmp (void *, void *, size_t); #endif /* Defined in filelock.c */ extern Lisp_Object Vtemporary_file_directory; EXFUN (Funlock_buffer, 0); EXFUN (Ffile_locked_p, 1); extern void unlock_all_files (void); extern void lock_file (Lisp_Object); extern void unlock_file (Lisp_Object); extern void unlock_buffer (struct buffer *); extern void syms_of_filelock (void); extern void init_filelock (void); /* Defined in sound.c */ extern void syms_of_sound (void); extern void init_sound (void); /* Defined in category.c */ extern void init_category_once (void); extern Lisp_Object char_category_set (int); extern void syms_of_category (void); /* Defined in ccl.c */ extern void syms_of_ccl (void); /* Defined in dired.c */ EXFUN (Ffile_attributes, 2); extern void syms_of_dired (void); extern Lisp_Object directory_files_internal (Lisp_Object, Lisp_Object, Lisp_Object, Lisp_Object, int, Lisp_Object); /* Defined in term.c */ extern int *char_ins_del_vector; extern void syms_of_term (void); extern void fatal (const char *msgid, ...) NO_RETURN; /* Defined in terminal.c */ EXFUN (Fframe_terminal, 1); EXFUN (Fdelete_terminal, 2); extern void syms_of_terminal (void); /* Defined in font.c */ extern void syms_of_font (void); extern void init_font (void); #ifdef HAVE_WINDOW_SYSTEM /* Defined in fontset.c */ extern void syms_of_fontset (void); EXFUN (Fset_fontset_font, 5); EXFUN (Fnew_fontset, 2); /* Defined in xfns.c, w32fns.c, or macfns.c */ extern Lisp_Object Qfont_param; extern Lisp_Object Vx_no_window_manager; EXFUN (Fxw_display_color_p, 1); EXFUN (Fx_file_dialog, 5); EXFUN (Fx_focus_frame, 1); #endif /* Defined in xfaces.c */ extern Lisp_Object Qdefault, Qtool_bar, Qregion, Qfringe; extern Lisp_Object Qheader_line, Qscroll_bar, Qcursor, Qborder, Qmouse, Qmenu; extern Lisp_Object Qmode_line_inactive, Qvertical_border; extern Lisp_Object Qface; extern Lisp_Object Qnormal; extern Lisp_Object QCfamily, QCweight, QCslant; extern Lisp_Object QCheight, QCname, QCwidth, QCforeground, QCbackground; extern Lisp_Object Vface_alternative_font_family_alist; extern Lisp_Object Vface_font_rescale_alist; extern Lisp_Object Vface_ignored_fonts; extern Lisp_Object Vface_alternative_font_registry_alist; extern Lisp_Object Vscalable_fonts_allowed; EXFUN (Fclear_face_cache, 1); EXFUN (Fx_load_color_file, 1); extern void syms_of_xfaces (void); #ifndef HAVE_GETLOADAVG /* Defined in getloadavg.c */ extern int getloadavg (double *, int); #endif #ifdef HAVE_X_WINDOWS /* Defined in xfns.c */ extern void syms_of_xfns (void); /* Defined in xsmfns.c */ extern void syms_of_xsmfns (void); /* Defined in xselect.c */ EXFUN (Fx_send_client_event, 6); extern void syms_of_xselect (void); /* Defined in xterm.c */ extern void syms_of_xterm (void); #endif /* HAVE_X_WINDOWS */ #ifdef HAVE_WINDOW_SYSTEM /* Defined in xterm.c, nsterm.m, w32term.c */ extern char *x_get_keysym_name (int); #endif /* HAVE_WINDOW_SYSTEM */ #ifdef MSDOS /* Defined in msdos.c */ EXFUN (Fmsdos_downcase_filename, 1); #endif #ifdef HAVE_LIBXML2 /* Defined in xml.c */ extern void syms_of_xml (void); #endif #ifdef HAVE_MENUS /* Defined in (x|w32)fns.c, nsfns.m... */ extern int have_menus_p (void); #endif #ifdef HAVE_DBUS /* Defined in dbusbind.c */ void syms_of_dbusbind (void); #endif #ifdef DOS_NT /* Defined in msdos.c, w32.c */ extern char *emacs_root_dir (void); #endif /* DOS_NT */ /* Nonzero means Emacs has already been initialized. Used during startup to detect startup of dumped Emacs. */ extern int initialized; extern int immediate_quit; /* Nonzero means ^G can quit instantly */ extern POINTER_TYPE *xmalloc (size_t); extern POINTER_TYPE *xrealloc (POINTER_TYPE *, size_t); extern void xfree (POINTER_TYPE *); extern char *xstrdup (const char *); extern char *egetenv (const char *); /* Set up the name of the machine we're running on. */ extern void init_system_name (void); /* Some systems (e.g., NT) use a different path separator than Unix, in addition to a device separator. Set the path separator to '/', and don't test for a device separator in IS_ANY_SEP. */ #define DIRECTORY_SEP '/' #ifndef IS_DIRECTORY_SEP #define IS_DIRECTORY_SEP(_c_) ((_c_) == DIRECTORY_SEP) #endif #ifndef IS_DEVICE_SEP #ifndef DEVICE_SEP #define IS_DEVICE_SEP(_c_) 0 #else #define IS_DEVICE_SEP(_c_) ((_c_) == DEVICE_SEP) #endif #endif #ifndef IS_ANY_SEP #define IS_ANY_SEP(_c_) (IS_DIRECTORY_SEP (_c_)) #endif #define SWITCH_ENUM_CAST(x) (x) /* Loop over Lisp list LIST. Signal an error if LIST is not a proper list, or if it contains circles. HARE and TORTOISE should be the names of Lisp_Object variables, and N should be the name of an EMACS_INT variable declared in the function where the macro is used. Each nested loop should use its own variables. In the loop body, HARE is set to each cons of LIST, and N is the length of the list processed so far. */ #define LIST_END_P(list, obj) \ (NILP (obj) \ ? 1 \ : (CONSP (obj) \ ? 0 \ : (wrong_type_argument (Qlistp, (list))), 1)) #define FOREACH(hare, list, tortoise, n) \ for (tortoise = hare = (list), n = 0; \ !LIST_END_P (list, hare); \ (hare = XCDR (hare), ++n, \ ((n & 1) != 0 \ ? (tortoise = XCDR (tortoise), \ (EQ (hare, tortoise) \ && (circular_list_error ((list)), 1))) \ : 0))) /* The ubiquitous min and max macros. */ #ifdef max #undef max #undef min #endif #define min(a, b) ((a) < (b) ? (a) : (b)) #define max(a, b) ((a) > (b) ? (a) : (b)) /* We used to use `abs', but that clashes with system headers on some platforms, and using a name reserved by Standard C is a bad idea anyway. */ #if !defined(eabs) #define eabs(x) ((x) < 0 ? -(x) : (x)) #endif /* Return a fixnum or float, depending on whether VAL fits in a Lisp fixnum. */ #define make_fixnum_or_float(val) \ (FIXNUM_OVERFLOW_P (val) \ ? make_float (val) \ : make_number ((EMACS_INT)(val))) /* Checks the `cycle check' variable CHECK to see if it indicates that EL is part of a cycle; CHECK must be either Qnil or a value returned by an earlier use of CYCLE_CHECK. SUSPICIOUS is the number of elements after which a cycle might be suspected; after that many elements, this macro begins consing in order to keep more precise track of elements. Returns nil if a cycle was detected, otherwise a new value for CHECK that includes EL. CHECK is evaluated multiple times, EL and SUSPICIOUS 0 or 1 times, so the caller should make sure that's ok. */ #define CYCLE_CHECK(check, el, suspicious) \ (NILP (check) \ ? make_number (0) \ : (INTEGERP (check) \ ? (XFASTINT (check) < (suspicious) \ ? make_number (XFASTINT (check) + 1) \ : Fcons (el, Qnil)) \ : (!NILP (Fmemq ((el), (check))) \ ? Qnil \ : Fcons ((el), (check))))) /* SAFE_ALLOCA normally allocates memory on the stack, but if size is larger than MAX_ALLOCA, use xmalloc to avoid overflowing the stack. */ #define MAX_ALLOCA 16*1024 extern Lisp_Object safe_alloca_unwind (Lisp_Object); #define USE_SAFE_ALLOCA \ int sa_count = (int) SPECPDL_INDEX (), sa_must_free = 0 /* SAFE_ALLOCA allocates a simple buffer. */ #define SAFE_ALLOCA(buf, type, size) \ do { \ if ((size) < MAX_ALLOCA) \ buf = (type) alloca (size); \ else \ { \ buf = (type) xmalloc (size); \ sa_must_free++; \ record_unwind_protect (safe_alloca_unwind, \ make_save_value (buf, 0)); \ } \ } while (0) /* SAFE_FREE frees xmalloced memory and enables GC as needed. */ #define SAFE_FREE() \ do { \ if (sa_must_free) { \ sa_must_free = 0; \ unbind_to (sa_count, Qnil); \ } \ } while (0) /* SAFE_ALLOCA_LISP allocates an array of Lisp_Objects. */ #define SAFE_ALLOCA_LISP(buf, nelt) \ do { \ int size_ = (nelt) * sizeof (Lisp_Object); \ if (size_ < MAX_ALLOCA) \ buf = (Lisp_Object *) alloca (size_); \ else \ { \ Lisp_Object arg_; \ buf = (Lisp_Object *) xmalloc (size_); \ arg_ = make_save_value (buf, nelt); \ XSAVE_VALUE (arg_)->dogc = 1; \ sa_must_free++; \ record_unwind_protect (safe_alloca_unwind, arg_); \ } \ } while (0) #endif /* EMACS_LISP_H */ /* arch-tag: 9b2ed020-70eb-47ac-94ee-e1c2a5107d5e (do not change this comment) */