Mercurial > emacs
view src/ccl.c @ 29859:cbcd0a9e4e72
(struct it): Add member add_overlay_start.
| author | Gerd Moellmann <gerd@gnu.org> |
|---|---|
| date | Thu, 22 Jun 2000 19:32:47 +0000 |
| parents | c6b0046bb943 |
| children | d9e5b40d33c5 |
line wrap: on
line source
/* CCL (Code Conversion Language) interpreter. Copyright (C) 1995, 1997 Electrotechnical Laboratory, JAPAN. Licensed to the Free Software Foundation. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifdef emacs #include <config.h> #endif #include <stdio.h> #ifdef emacs #include "lisp.h" #include "charset.h" #include "ccl.h" #include "coding.h" #else /* not emacs */ #include "mulelib.h" #endif /* not emacs */ /* This contains all code conversion map available to CCL. */ Lisp_Object Vcode_conversion_map_vector; /* Alist of fontname patterns vs corresponding CCL program. */ Lisp_Object Vfont_ccl_encoder_alist; /* This symbol is a property which assocates with ccl program vector. Ex: (get 'ccl-big5-encoder 'ccl-program) returns ccl program vector. */ Lisp_Object Qccl_program; /* These symbols are properties which associate with code conversion map and their ID respectively. */ Lisp_Object Qcode_conversion_map; Lisp_Object Qcode_conversion_map_id; /* Symbols of ccl program have this property, a value of the property is an index for Vccl_protram_table. */ Lisp_Object Qccl_program_idx; /* Table of registered CCL programs. Each element is a vector of NAME, CCL_PROG, and RESOLVEDP where NAME (symbol) is the name of the program, CCL_PROG (vector) is the compiled code of the program, RESOLVEDP (t or nil) is the flag to tell if symbols in CCL_PROG is already resolved to index numbers or not. */ Lisp_Object Vccl_program_table; /* CCL (Code Conversion Language) is a simple language which has operations on one input buffer, one output buffer, and 7 registers. The syntax of CCL is described in `ccl.el'. Emacs Lisp function `ccl-compile' compiles a CCL program and produces a CCL code which is a vector of integers. The structure of this vector is as follows: The 1st element: buffer-magnification, a factor for the size of output buffer compared with the size of input buffer. The 2nd element: address of CCL code to be executed when encountered with end of input stream. The 3rd and the remaining elements: CCL codes. */ /* Header of CCL compiled code */ #define CCL_HEADER_BUF_MAG 0 #define CCL_HEADER_EOF 1 #define CCL_HEADER_MAIN 2 /* CCL code is a sequence of 28-bit non-negative integers (i.e. the MSB is always 0), each contains CCL command and/or arguments in the following format: |----------------- integer (28-bit) ------------------| |------- 17-bit ------|- 3-bit --|- 3-bit --|- 5-bit -| |--constant argument--|-register-|-register-|-command-| ccccccccccccccccc RRR rrr XXXXX or |------- relative address -------|-register-|-command-| cccccccccccccccccccc rrr XXXXX or |------------- constant or other args ----------------| cccccccccccccccccccccccccccc where, `cc...c' is a non-negative integer indicating constant value (the left most `c' is always 0) or an absolute jump address, `RRR' and `rrr' are CCL register number, `XXXXX' is one of the following CCL commands. */ /* CCL commands Each comment fields shows one or more lines for command syntax and the following lines for semantics of the command. In semantics, IC stands for Instruction Counter. */ #define CCL_SetRegister 0x00 /* Set register a register value: 1:00000000000000000RRRrrrXXXXX ------------------------------ reg[rrr] = reg[RRR]; */ #define CCL_SetShortConst 0x01 /* Set register a short constant value: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX ------------------------------ reg[rrr] = CCCCCCCCCCCCCCCCCCC; */ #define CCL_SetConst 0x02 /* Set register a constant value: 1:00000000000000000000rrrXXXXX 2:CONSTANT ------------------------------ reg[rrr] = CONSTANT; IC++; */ #define CCL_SetArray 0x03 /* Set register an element of array: 1:CCCCCCCCCCCCCCCCCRRRrrrXXXXX 2:ELEMENT[0] 3:ELEMENT[1] ... ------------------------------ if (0 <= reg[RRR] < CC..C) reg[rrr] = ELEMENT[reg[RRR]]; IC += CC..C; */ #define CCL_Jump 0x04 /* Jump: 1:A--D--D--R--E--S--S-000XXXXX ------------------------------ IC += ADDRESS; */ /* Note: If CC..C is greater than 0, the second code is omitted. */ #define CCL_JumpCond 0x05 /* Jump conditional: 1:A--D--D--R--E--S--S-rrrXXXXX ------------------------------ if (!reg[rrr]) IC += ADDRESS; */ #define CCL_WriteRegisterJump 0x06 /* Write register and jump: 1:A--D--D--R--E--S--S-rrrXXXXX ------------------------------ write (reg[rrr]); IC += ADDRESS; */ #define CCL_WriteRegisterReadJump 0x07 /* Write register, read, and jump: 1:A--D--D--R--E--S--S-rrrXXXXX 2:A--D--D--R--E--S--S-rrrYYYYY ----------------------------- write (reg[rrr]); IC++; read (reg[rrr]); IC += ADDRESS; */ /* Note: If read is suspended, the resumed execution starts from the second code (YYYYY == CCL_ReadJump). */ #define CCL_WriteConstJump 0x08 /* Write constant and jump: 1:A--D--D--R--E--S--S-000XXXXX 2:CONST ------------------------------ write (CONST); IC += ADDRESS; */ #define CCL_WriteConstReadJump 0x09 /* Write constant, read, and jump: 1:A--D--D--R--E--S--S-rrrXXXXX 2:CONST 3:A--D--D--R--E--S--S-rrrYYYYY ----------------------------- write (CONST); IC += 2; read (reg[rrr]); IC += ADDRESS; */ /* Note: If read is suspended, the resumed execution starts from the second code (YYYYY == CCL_ReadJump). */ #define CCL_WriteStringJump 0x0A /* Write string and jump: 1:A--D--D--R--E--S--S-000XXXXX 2:LENGTH 3:0000STRIN[0]STRIN[1]STRIN[2] ... ------------------------------ write_string (STRING, LENGTH); IC += ADDRESS; */ #define CCL_WriteArrayReadJump 0x0B /* Write an array element, read, and jump: 1:A--D--D--R--E--S--S-rrrXXXXX 2:LENGTH 3:ELEMENET[0] 4:ELEMENET[1] ... N:A--D--D--R--E--S--S-rrrYYYYY ------------------------------ if (0 <= reg[rrr] < LENGTH) write (ELEMENT[reg[rrr]]); IC += LENGTH + 2; (... pointing at N+1) read (reg[rrr]); IC += ADDRESS; */ /* Note: If read is suspended, the resumed execution starts from the Nth code (YYYYY == CCL_ReadJump). */ #define CCL_ReadJump 0x0C /* Read and jump: 1:A--D--D--R--E--S--S-rrrYYYYY ----------------------------- read (reg[rrr]); IC += ADDRESS; */ #define CCL_Branch 0x0D /* Jump by branch table: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:A--D--D--R--E-S-S[0]000XXXXX 3:A--D--D--R--E-S-S[1]000XXXXX ... ------------------------------ if (0 <= reg[rrr] < CC..C) IC += ADDRESS[reg[rrr]]; else IC += ADDRESS[CC..C]; */ #define CCL_ReadRegister 0x0E /* Read bytes into registers: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:CCCCCCCCCCCCCCCCCCCCrrrXXXXX ... ------------------------------ while (CCC--) read (reg[rrr]); */ #define CCL_WriteExprConst 0x0F /* write result of expression: 1:00000OPERATION000RRR000XXXXX 2:CONSTANT ------------------------------ write (reg[RRR] OPERATION CONSTANT); IC++; */ /* Note: If the Nth read is suspended, the resumed execution starts from the Nth code. */ #define CCL_ReadBranch 0x10 /* Read one byte into a register, and jump by branch table: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:A--D--D--R--E-S-S[0]000XXXXX 3:A--D--D--R--E-S-S[1]000XXXXX ... ------------------------------ read (read[rrr]); if (0 <= reg[rrr] < CC..C) IC += ADDRESS[reg[rrr]]; else IC += ADDRESS[CC..C]; */ #define CCL_WriteRegister 0x11 /* Write registers: 1:CCCCCCCCCCCCCCCCCCCrrrXXXXX 2:CCCCCCCCCCCCCCCCCCCrrrXXXXX ... ------------------------------ while (CCC--) write (reg[rrr]); ... */ /* Note: If the Nth write is suspended, the resumed execution starts from the Nth code. */ #define CCL_WriteExprRegister 0x12 /* Write result of expression 1:00000OPERATIONRrrRRR000XXXXX ------------------------------ write (reg[RRR] OPERATION reg[Rrr]); */ #define CCL_Call 0x13 /* Call the CCL program whose ID is CC..C or cc..c. 1:CCCCCCCCCCCCCCCCCCCCFFFXXXXX [2:00000000cccccccccccccccccccc] ------------------------------ if (FFF) call (cc..c) IC++; else call (CC..C) */ #define CCL_WriteConstString 0x14 /* Write a constant or a string: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX [2:0000STRIN[0]STRIN[1]STRIN[2]] [...] ----------------------------- if (!rrr) write (CC..C) else write_string (STRING, CC..C); IC += (CC..C + 2) / 3; */ #define CCL_WriteArray 0x15 /* Write an element of array: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:ELEMENT[0] 3:ELEMENT[1] ... ------------------------------ if (0 <= reg[rrr] < CC..C) write (ELEMENT[reg[rrr]]); IC += CC..C; */ #define CCL_End 0x16 /* Terminate: 1:00000000000000000000000XXXXX ------------------------------ terminate (); */ /* The following two codes execute an assignment arithmetic/logical operation. The form of the operation is like REG OP= OPERAND. */ #define CCL_ExprSelfConst 0x17 /* REG OP= constant: 1:00000OPERATION000000rrrXXXXX 2:CONSTANT ------------------------------ reg[rrr] OPERATION= CONSTANT; */ #define CCL_ExprSelfReg 0x18 /* REG1 OP= REG2: 1:00000OPERATION000RRRrrrXXXXX ------------------------------ reg[rrr] OPERATION= reg[RRR]; */ /* The following codes execute an arithmetic/logical operation. The form of the operation is like REG_X = REG_Y OP OPERAND2. */ #define CCL_SetExprConst 0x19 /* REG_X = REG_Y OP constant: 1:00000OPERATION000RRRrrrXXXXX 2:CONSTANT ------------------------------ reg[rrr] = reg[RRR] OPERATION CONSTANT; IC++; */ #define CCL_SetExprReg 0x1A /* REG1 = REG2 OP REG3: 1:00000OPERATIONRrrRRRrrrXXXXX ------------------------------ reg[rrr] = reg[RRR] OPERATION reg[Rrr]; */ #define CCL_JumpCondExprConst 0x1B /* Jump conditional according to an operation on constant: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:CONSTANT ----------------------------- reg[7] = reg[rrr] OPERATION CONSTANT; if (!(reg[7])) IC += ADDRESS; else IC += 2 */ #define CCL_JumpCondExprReg 0x1C /* Jump conditional according to an operation on register: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:RRR ----------------------------- reg[7] = reg[rrr] OPERATION reg[RRR]; if (!reg[7]) IC += ADDRESS; else IC += 2; */ #define CCL_ReadJumpCondExprConst 0x1D /* Read and jump conditional according to an operation on constant: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:CONSTANT ----------------------------- read (reg[rrr]); reg[7] = reg[rrr] OPERATION CONSTANT; if (!reg[7]) IC += ADDRESS; else IC += 2; */ #define CCL_ReadJumpCondExprReg 0x1E /* Read and jump conditional according to an operation on register: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:RRR ----------------------------- read (reg[rrr]); reg[7] = reg[rrr] OPERATION reg[RRR]; if (!reg[7]) IC += ADDRESS; else IC += 2; */ #define CCL_Extention 0x1F /* Extended CCL code 1:ExtendedCOMMNDRrrRRRrrrXXXXX 2:ARGUEMENT 3:... ------------------------------ extended_command (rrr,RRR,Rrr,ARGS) */ /* Here after, Extended CCL Instructions. Bit length of extended command is 14. Therefore, the instruction code range is 0..16384(0x3fff). */ /* Read a multibyte characeter. A code point is stored into reg[rrr]. A charset ID is stored into reg[RRR]. */ #define CCL_ReadMultibyteChar2 0x00 /* Read Multibyte Character 1:ExtendedCOMMNDRrrRRRrrrXXXXX */ /* Write a multibyte character. Write a character whose code point is reg[rrr] and the charset ID is reg[RRR]. */ #define CCL_WriteMultibyteChar2 0x01 /* Write Multibyte Character 1:ExtendedCOMMNDRrrRRRrrrXXXXX */ /* Translate a character whose code point is reg[rrr] and the charset ID is reg[RRR] by a translation table whose ID is reg[Rrr]. A translated character is set in reg[rrr] (code point) and reg[RRR] (charset ID). */ #define CCL_TranslateCharacter 0x02 /* Translate a multibyte character 1:ExtendedCOMMNDRrrRRRrrrXXXXX */ /* Translate a character whose code point is reg[rrr] and the charset ID is reg[RRR] by a translation table whose ID is ARGUMENT. A translated character is set in reg[rrr] (code point) and reg[RRR] (charset ID). */ #define CCL_TranslateCharacterConstTbl 0x03 /* Translate a multibyte character 1:ExtendedCOMMNDRrrRRRrrrXXXXX 2:ARGUMENT(Translation Table ID) */ /* Iterate looking up MAPs for reg[rrr] starting from the Nth (N = reg[RRR]) MAP until some value is found. Each MAP is a Lisp vector whose element is number, nil, t, or lambda. If the element is nil, ignore the map and proceed to the next map. If the element is t or lambda, finish without changing reg[rrr]. If the element is a number, set reg[rrr] to the number and finish. Detail of the map structure is descibed in the comment for CCL_MapMultiple below. */ #define CCL_IterateMultipleMap 0x10 /* Iterate multiple maps 1:ExtendedCOMMNDXXXRRRrrrXXXXX 2:NUMBER of MAPs 3:MAP-ID1 4:MAP-ID2 ... */ /* Map the code in reg[rrr] by MAPs starting from the Nth (N = reg[RRR]) map. MAPs are supplied in the succeeding CCL codes as follows: When CCL program gives this nested structure of map to this command: ((MAP-ID11 MAP-ID12 (MAP-ID121 MAP-ID122 MAP-ID123) MAP-ID13) (MAP-ID21 (MAP-ID211 (MAP-ID2111) MAP-ID212) MAP-ID22)), the compiled CCL codes has this sequence: CCL_MapMultiple (CCL code of this command) 16 (total number of MAPs and SEPARATORs) -7 (1st SEPARATOR) MAP-ID11 MAP-ID12 -3 (2nd SEPARATOR) MAP-ID121 MAP-ID122 MAP-ID123 MAP-ID13 -7 (3rd SEPARATOR) MAP-ID21 -4 (4th SEPARATOR) MAP-ID211 -1 (5th SEPARATOR) MAP_ID2111 MAP-ID212 MAP-ID22 A value of each SEPARATOR follows this rule: MAP-SET := SEPARATOR [(MAP-ID | MAP-SET)]+ SEPARATOR := -(number of MAP-IDs and SEPARATORs in the MAP-SET) (*)....Nest level of MAP-SET must not be over than MAX_MAP_SET_LEVEL. When some map fails to map (i.e. it doesn't have a value for reg[rrr]), the mapping is treated as identity. The mapping is iterated for all maps in each map set (set of maps separated by SEPARATOR) except in the case that lambda is encountered. More precisely, the mapping proceeds as below: At first, VAL0 is set to reg[rrr], and it is translated by the first map to VAL1. Then, VAL1 is translated by the next map to VAL2. This mapping is iterated until the last map is used. The result of the mapping is the last value of VAL?. But, when VALm is mapped to VALn and VALn is not a number, the mapping proceed as below: If VALn is nil, the lastest map is ignored and the mapping of VALm proceed to the next map. In VALn is t, VALm is reverted to reg[rrr] and the mapping of VALm proceed to the next map. If VALn is lambda, the whole mapping process terminates, and VALm is the result of this mapping. Each map is a Lisp vector of the following format (a) or (b): (a)......[STARTPOINT VAL1 VAL2 ...] (b)......[t VAL STARTPOINT ENDPOINT], where STARTPOINT is an offset to be used for indexing a map, ENDPOINT is a maximum index number of a map, VAL and VALn is a number, nil, t, or lambda. Valid index range of a map of type (a) is: STARTPOINT <= index < STARTPOINT + map_size - 1 Valid index range of a map of type (b) is: STARTPOINT <= index < ENDPOINT */ #define CCL_MapMultiple 0x11 /* Mapping by multiple code conversion maps 1:ExtendedCOMMNDXXXRRRrrrXXXXX 2:N-2 3:SEPARATOR_1 (< 0) 4:MAP-ID_1 5:MAP-ID_2 ... M:SEPARATOR_x (< 0) M+1:MAP-ID_y ... N:SEPARATOR_z (< 0) */ #define MAX_MAP_SET_LEVEL 20 typedef struct { int rest_length; int orig_val; } tr_stack; static tr_stack mapping_stack[MAX_MAP_SET_LEVEL]; static tr_stack *mapping_stack_pointer; #define PUSH_MAPPING_STACK(restlen, orig) \ { \ mapping_stack_pointer->rest_length = (restlen); \ mapping_stack_pointer->orig_val = (orig); \ mapping_stack_pointer++; \ } #define POP_MAPPING_STACK(restlen, orig) \ { \ mapping_stack_pointer--; \ (restlen) = mapping_stack_pointer->rest_length; \ (orig) = mapping_stack_pointer->orig_val; \ } \ #define CCL_MapSingle 0x12 /* Map by single code conversion map 1:ExtendedCOMMNDXXXRRRrrrXXXXX 2:MAP-ID ------------------------------ Map reg[rrr] by MAP-ID. If some valid mapping is found, set reg[rrr] to the result, else set reg[RRR] to -1. */ /* CCL arithmetic/logical operators. */ #define CCL_PLUS 0x00 /* X = Y + Z */ #define CCL_MINUS 0x01 /* X = Y - Z */ #define CCL_MUL 0x02 /* X = Y * Z */ #define CCL_DIV 0x03 /* X = Y / Z */ #define CCL_MOD 0x04 /* X = Y % Z */ #define CCL_AND 0x05 /* X = Y & Z */ #define CCL_OR 0x06 /* X = Y | Z */ #define CCL_XOR 0x07 /* X = Y ^ Z */ #define CCL_LSH 0x08 /* X = Y << Z */ #define CCL_RSH 0x09 /* X = Y >> Z */ #define CCL_LSH8 0x0A /* X = (Y << 8) | Z */ #define CCL_RSH8 0x0B /* X = Y >> 8, r[7] = Y & 0xFF */ #define CCL_DIVMOD 0x0C /* X = Y / Z, r[7] = Y % Z */ #define CCL_LS 0x10 /* X = (X < Y) */ #define CCL_GT 0x11 /* X = (X > Y) */ #define CCL_EQ 0x12 /* X = (X == Y) */ #define CCL_LE 0x13 /* X = (X <= Y) */ #define CCL_GE 0x14 /* X = (X >= Y) */ #define CCL_NE 0x15 /* X = (X != Y) */ #define CCL_DECODE_SJIS 0x16 /* X = HIGHER_BYTE (DE-SJIS (Y, Z)) r[7] = LOWER_BYTE (DE-SJIS (Y, Z)) */ #define CCL_ENCODE_SJIS 0x17 /* X = HIGHER_BYTE (SJIS (Y, Z)) r[7] = LOWER_BYTE (SJIS (Y, Z) */ /* Terminate CCL program successfully. */ #define CCL_SUCCESS \ do { \ ccl->status = CCL_STAT_SUCCESS; \ goto ccl_finish; \ } while (0) /* Suspend CCL program because of reading from empty input buffer or writing to full output buffer. When this program is resumed, the same I/O command is executed. */ #define CCL_SUSPEND(stat) \ do { \ ic--; \ ccl->status = stat; \ goto ccl_finish; \ } while (0) /* Terminate CCL program because of invalid command. Should not occur in the normal case. */ #define CCL_INVALID_CMD \ do { \ ccl->status = CCL_STAT_INVALID_CMD; \ goto ccl_error_handler; \ } while (0) /* Encode one character CH to multibyte form and write to the current output buffer. If CH is less than 256, CH is written as is. */ #define CCL_WRITE_CHAR(ch) \ do { \ int bytes = SINGLE_BYTE_CHAR_P (ch) ? 1: CHAR_BYTES (ch); \ if (ch == '\n' && ccl->eol_type == CODING_EOL_CRLF) \ bytes++; \ if (!dst) \ CCL_INVALID_CMD; \ else if (dst + bytes <= (dst_bytes ? dst_end : src)) \ { \ if (ch == '\n') \ { \ if (ccl->eol_type == CODING_EOL_CRLF) \ *dst++ = '\r', *dst++ = '\n'; \ else if (ccl->eol_type == CODING_EOL_CR) \ *dst++ = '\r'; \ else \ *dst++ = '\n'; \ } \ else if (bytes == 1) \ *dst++ = (ch); \ else \ dst += CHAR_STRING (ch, dst); \ } \ else \ CCL_SUSPEND (CCL_STAT_SUSPEND_BY_DST); \ } while (0) /* Write a string at ccl_prog[IC] of length LEN to the current output buffer. */ #define CCL_WRITE_STRING(len) \ do { \ if (!dst) \ CCL_INVALID_CMD; \ else if (dst + len <= (dst_bytes ? dst_end : src)) \ for (i = 0; i < len; i++) \ *dst++ = ((XFASTINT (ccl_prog[ic + (i / 3)])) \ >> ((2 - (i % 3)) * 8)) & 0xFF; \ else \ CCL_SUSPEND (CCL_STAT_SUSPEND_BY_DST); \ } while (0) /* Read one byte from the current input buffer into Rth register. */ #define CCL_READ_CHAR(r) \ do { \ if (!src) \ CCL_INVALID_CMD; \ else if (src < src_end) \ r = *src++; \ else if (ccl->last_block) \ { \ ic = ccl->eof_ic; \ goto ccl_repeat; \ } \ else \ CCL_SUSPEND (CCL_STAT_SUSPEND_BY_SRC); \ } while (0) /* Set C to the character code made from CHARSET and CODE. This is like MAKE_CHAR but check the validity of CHARSET and CODE. If they are not valid, set C to (CODE & 0xFF) because that is usually the case that CCL_ReadMultibyteChar2 read an invalid code and it set CODE to that invalid byte. */ #define CCL_MAKE_CHAR(charset, code, c) \ do { \ if (charset == CHARSET_ASCII) \ c = code & 0xFF; \ else if (CHARSET_DEFINED_P (charset) \ && (code & 0x7F) >= 32 \ && (code < 256 || ((code >> 7) & 0x7F) >= 32)) \ { \ int c1 = code & 0x7F, c2 = 0; \ \ if (code >= 256) \ c2 = c1, c1 = (code >> 7) & 0x7F; \ c = MAKE_CHAR (charset, c1, c2); \ } \ else \ c = code & 0xFF; \ } while (0) /* Execute CCL code on SRC_BYTES length text at SOURCE. The resulting text goes to a place pointed by DESTINATION, the length of which should not exceed DST_BYTES. The bytes actually processed is returned as *CONSUMED. The return value is the length of the resulting text. As a side effect, the contents of CCL registers are updated. If SOURCE or DESTINATION is NULL, only operations on registers are permitted. */ #ifdef CCL_DEBUG #define CCL_DEBUG_BACKTRACE_LEN 256 int ccl_backtrace_table[CCL_BACKTRACE_TABLE]; int ccl_backtrace_idx; #endif struct ccl_prog_stack { Lisp_Object *ccl_prog; /* Pointer to an array of CCL code. */ int ic; /* Instruction Counter. */ }; /* For the moment, we only support depth 256 of stack. */ static struct ccl_prog_stack ccl_prog_stack_struct[256]; int ccl_driver (ccl, source, destination, src_bytes, dst_bytes, consumed) struct ccl_program *ccl; unsigned char *source, *destination; int src_bytes, dst_bytes; int *consumed; { register int *reg = ccl->reg; register int ic = ccl->ic; register int code, field1, field2; register Lisp_Object *ccl_prog = ccl->prog; unsigned char *src = source, *src_end = src + src_bytes; unsigned char *dst = destination, *dst_end = dst + dst_bytes; int jump_address; int i, j, op; int stack_idx = ccl->stack_idx; /* Instruction counter of the current CCL code. */ int this_ic; if (ic >= ccl->eof_ic) ic = CCL_HEADER_MAIN; if (ccl->buf_magnification ==0) /* We can't produce any bytes. */ dst = NULL; #ifdef CCL_DEBUG ccl_backtrace_idx = 0; #endif for (;;) { ccl_repeat: #ifdef CCL_DEBUG ccl_backtrace_table[ccl_backtrace_idx++] = ic; if (ccl_backtrace_idx >= CCL_DEBUG_BACKTRACE_LEN) ccl_backtrace_idx = 0; ccl_backtrace_table[ccl_backtrace_idx] = 0; #endif if (!NILP (Vquit_flag) && NILP (Vinhibit_quit)) { /* We can't just signal Qquit, instead break the loop as if the whole data is processed. Don't reset Vquit_flag, it must be handled later at a safer place. */ if (consumed) src = source + src_bytes; ccl->status = CCL_STAT_QUIT; break; } this_ic = ic; code = XINT (ccl_prog[ic]); ic++; field1 = code >> 8; field2 = (code & 0xFF) >> 5; #define rrr field2 #define RRR (field1 & 7) #define Rrr ((field1 >> 3) & 7) #define ADDR field1 #define EXCMD (field1 >> 6) switch (code & 0x1F) { case CCL_SetRegister: /* 00000000000000000RRRrrrXXXXX */ reg[rrr] = reg[RRR]; break; case CCL_SetShortConst: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ reg[rrr] = field1; break; case CCL_SetConst: /* 00000000000000000000rrrXXXXX */ reg[rrr] = XINT (ccl_prog[ic]); ic++; break; case CCL_SetArray: /* CCCCCCCCCCCCCCCCCCCCRRRrrrXXXXX */ i = reg[RRR]; j = field1 >> 3; if ((unsigned int) i < j) reg[rrr] = XINT (ccl_prog[ic + i]); ic += j; break; case CCL_Jump: /* A--D--D--R--E--S--S-000XXXXX */ ic += ADDR; break; case CCL_JumpCond: /* A--D--D--R--E--S--S-rrrXXXXX */ if (!reg[rrr]) ic += ADDR; break; case CCL_WriteRegisterJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; CCL_WRITE_CHAR (i); ic += ADDR; break; case CCL_WriteRegisterReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; CCL_WRITE_CHAR (i); ic++; CCL_READ_CHAR (reg[rrr]); ic += ADDR - 1; break; case CCL_WriteConstJump: /* A--D--D--R--E--S--S-000XXXXX */ i = XINT (ccl_prog[ic]); CCL_WRITE_CHAR (i); ic += ADDR; break; case CCL_WriteConstReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = XINT (ccl_prog[ic]); CCL_WRITE_CHAR (i); ic++; CCL_READ_CHAR (reg[rrr]); ic += ADDR - 1; break; case CCL_WriteStringJump: /* A--D--D--R--E--S--S-000XXXXX */ j = XINT (ccl_prog[ic]); ic++; CCL_WRITE_STRING (j); ic += ADDR - 1; break; case CCL_WriteArrayReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; j = XINT (ccl_prog[ic]); if ((unsigned int) i < j) { i = XINT (ccl_prog[ic + 1 + i]); CCL_WRITE_CHAR (i); } ic += j + 2; CCL_READ_CHAR (reg[rrr]); ic += ADDR - (j + 2); break; case CCL_ReadJump: /* A--D--D--R--E--S--S-rrrYYYYY */ CCL_READ_CHAR (reg[rrr]); ic += ADDR; break; case CCL_ReadBranch: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ CCL_READ_CHAR (reg[rrr]); /* fall through ... */ case CCL_Branch: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ if ((unsigned int) reg[rrr] < field1) ic += XINT (ccl_prog[ic + reg[rrr]]); else ic += XINT (ccl_prog[ic + field1]); break; case CCL_ReadRegister: /* CCCCCCCCCCCCCCCCCCCCrrXXXXX */ while (1) { CCL_READ_CHAR (reg[rrr]); if (!field1) break; code = XINT (ccl_prog[ic]); ic++; field1 = code >> 8; field2 = (code & 0xFF) >> 5; } break; case CCL_WriteExprConst: /* 1:00000OPERATION000RRR000XXXXX */ rrr = 7; i = reg[RRR]; j = XINT (ccl_prog[ic]); op = field1 >> 6; jump_address = ic + 1; goto ccl_set_expr; case CCL_WriteRegister: /* CCCCCCCCCCCCCCCCCCCrrrXXXXX */ while (1) { i = reg[rrr]; CCL_WRITE_CHAR (i); if (!field1) break; code = XINT (ccl_prog[ic]); ic++; field1 = code >> 8; field2 = (code & 0xFF) >> 5; } break; case CCL_WriteExprRegister: /* 1:00000OPERATIONRrrRRR000XXXXX */ rrr = 7; i = reg[RRR]; j = reg[Rrr]; op = field1 >> 6; jump_address = ic; goto ccl_set_expr; case CCL_Call: /* 1:CCCCCCCCCCCCCCCCCCCCFFFXXXXX */ { Lisp_Object slot; int prog_id; /* If FFF is nonzero, the CCL program ID is in the following code. */ if (rrr) { prog_id = XINT (ccl_prog[ic]); ic++; } else prog_id = field1; if (stack_idx >= 256 || prog_id < 0 || prog_id >= XVECTOR (Vccl_program_table)->size || (slot = XVECTOR (Vccl_program_table)->contents[prog_id], !VECTORP (slot)) || !VECTORP (XVECTOR (slot)->contents[1])) { if (stack_idx > 0) { ccl_prog = ccl_prog_stack_struct[0].ccl_prog; ic = ccl_prog_stack_struct[0].ic; } CCL_INVALID_CMD; } ccl_prog_stack_struct[stack_idx].ccl_prog = ccl_prog; ccl_prog_stack_struct[stack_idx].ic = ic; stack_idx++; ccl_prog = XVECTOR (XVECTOR (slot)->contents[1])->contents; ic = CCL_HEADER_MAIN; } break; case CCL_WriteConstString: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ if (!rrr) CCL_WRITE_CHAR (field1); else { CCL_WRITE_STRING (field1); ic += (field1 + 2) / 3; } break; case CCL_WriteArray: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ i = reg[rrr]; if ((unsigned int) i < field1) { j = XINT (ccl_prog[ic + i]); CCL_WRITE_CHAR (j); } ic += field1; break; case CCL_End: /* 0000000000000000000000XXXXX */ if (stack_idx > 0) { stack_idx--; ccl_prog = ccl_prog_stack_struct[stack_idx].ccl_prog; ic = ccl_prog_stack_struct[stack_idx].ic; break; } if (src) src = src_end; /* ccl->ic should points to this command code again to suppress further processing. */ ic--; CCL_SUCCESS; case CCL_ExprSelfConst: /* 00000OPERATION000000rrrXXXXX */ i = XINT (ccl_prog[ic]); ic++; op = field1 >> 6; goto ccl_expr_self; case CCL_ExprSelfReg: /* 00000OPERATION000RRRrrrXXXXX */ i = reg[RRR]; op = field1 >> 6; ccl_expr_self: switch (op) { case CCL_PLUS: reg[rrr] += i; break; case CCL_MINUS: reg[rrr] -= i; break; case CCL_MUL: reg[rrr] *= i; break; case CCL_DIV: reg[rrr] /= i; break; case CCL_MOD: reg[rrr] %= i; break; case CCL_AND: reg[rrr] &= i; break; case CCL_OR: reg[rrr] |= i; break; case CCL_XOR: reg[rrr] ^= i; break; case CCL_LSH: reg[rrr] <<= i; break; case CCL_RSH: reg[rrr] >>= i; break; case CCL_LSH8: reg[rrr] <<= 8; reg[rrr] |= i; break; case CCL_RSH8: reg[7] = reg[rrr] & 0xFF; reg[rrr] >>= 8; break; case CCL_DIVMOD: reg[7] = reg[rrr] % i; reg[rrr] /= i; break; case CCL_LS: reg[rrr] = reg[rrr] < i; break; case CCL_GT: reg[rrr] = reg[rrr] > i; break; case CCL_EQ: reg[rrr] = reg[rrr] == i; break; case CCL_LE: reg[rrr] = reg[rrr] <= i; break; case CCL_GE: reg[rrr] = reg[rrr] >= i; break; case CCL_NE: reg[rrr] = reg[rrr] != i; break; default: CCL_INVALID_CMD; } break; case CCL_SetExprConst: /* 00000OPERATION000RRRrrrXXXXX */ i = reg[RRR]; j = XINT (ccl_prog[ic]); op = field1 >> 6; jump_address = ++ic; goto ccl_set_expr; case CCL_SetExprReg: /* 00000OPERATIONRrrRRRrrrXXXXX */ i = reg[RRR]; j = reg[Rrr]; op = field1 >> 6; jump_address = ic; goto ccl_set_expr; case CCL_ReadJumpCondExprConst: /* A--D--D--R--E--S--S-rrrXXXXX */ CCL_READ_CHAR (reg[rrr]); case CCL_JumpCondExprConst: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; op = XINT (ccl_prog[ic]); jump_address = ic++ + ADDR; j = XINT (ccl_prog[ic]); ic++; rrr = 7; goto ccl_set_expr; case CCL_ReadJumpCondExprReg: /* A--D--D--R--E--S--S-rrrXXXXX */ CCL_READ_CHAR (reg[rrr]); case CCL_JumpCondExprReg: i = reg[rrr]; op = XINT (ccl_prog[ic]); jump_address = ic++ + ADDR; j = reg[XINT (ccl_prog[ic])]; ic++; rrr = 7; ccl_set_expr: switch (op) { case CCL_PLUS: reg[rrr] = i + j; break; case CCL_MINUS: reg[rrr] = i - j; break; case CCL_MUL: reg[rrr] = i * j; break; case CCL_DIV: reg[rrr] = i / j; break; case CCL_MOD: reg[rrr] = i % j; break; case CCL_AND: reg[rrr] = i & j; break; case CCL_OR: reg[rrr] = i | j; break; case CCL_XOR: reg[rrr] = i ^ j;; break; case CCL_LSH: reg[rrr] = i << j; break; case CCL_RSH: reg[rrr] = i >> j; break; case CCL_LSH8: reg[rrr] = (i << 8) | j; break; case CCL_RSH8: reg[rrr] = i >> 8; reg[7] = i & 0xFF; break; case CCL_DIVMOD: reg[rrr] = i / j; reg[7] = i % j; break; case CCL_LS: reg[rrr] = i < j; break; case CCL_GT: reg[rrr] = i > j; break; case CCL_EQ: reg[rrr] = i == j; break; case CCL_LE: reg[rrr] = i <= j; break; case CCL_GE: reg[rrr] = i >= j; break; case CCL_NE: reg[rrr] = i != j; break; case CCL_DECODE_SJIS: DECODE_SJIS (i, j, reg[rrr], reg[7]); break; case CCL_ENCODE_SJIS: ENCODE_SJIS (i, j, reg[rrr], reg[7]); break; default: CCL_INVALID_CMD; } code &= 0x1F; if (code == CCL_WriteExprConst || code == CCL_WriteExprRegister) { i = reg[rrr]; CCL_WRITE_CHAR (i); ic = jump_address; } else if (!reg[rrr]) ic = jump_address; break; case CCL_Extention: switch (EXCMD) { case CCL_ReadMultibyteChar2: if (!src) CCL_INVALID_CMD; do { if (src >= src_end) { src++; goto ccl_read_multibyte_character_suspend; } i = *src++; if (i < 0x80) { /* ASCII */ reg[rrr] = i; reg[RRR] = CHARSET_ASCII; } else if (i <= MAX_CHARSET_OFFICIAL_DIMENSION1) { if (src >= src_end) goto ccl_read_multibyte_character_suspend; reg[RRR] = i; reg[rrr] = (*src++ & 0x7F); } else if (i <= MAX_CHARSET_OFFICIAL_DIMENSION2) { if ((src + 1) >= src_end) goto ccl_read_multibyte_character_suspend; reg[RRR] = i; i = (*src++ & 0x7F); reg[rrr] = ((i << 7) | (*src & 0x7F)); src++; } else if ((i == LEADING_CODE_PRIVATE_11) || (i == LEADING_CODE_PRIVATE_12)) { if ((src + 1) >= src_end) goto ccl_read_multibyte_character_suspend; reg[RRR] = *src++; reg[rrr] = (*src++ & 0x7F); } else if ((i == LEADING_CODE_PRIVATE_21) || (i == LEADING_CODE_PRIVATE_22)) { if ((src + 2) >= src_end) goto ccl_read_multibyte_character_suspend; reg[RRR] = *src++; i = (*src++ & 0x7F); reg[rrr] = ((i << 7) | (*src & 0x7F)); src++; } else if (i == LEADING_CODE_8_BIT_CONTROL) { if (src >= src_end) goto ccl_read_multibyte_character_suspend; reg[RRR] = CHARSET_8_BIT_CONTROL; reg[rrr] = (*src++ - 0x20); } else if (i >= 0xA0) { reg[RRR] = CHARSET_8_BIT_GRAPHIC; reg[rrr] = i; } else { /* INVALID CODE. Return a single byte character. */ reg[RRR] = CHARSET_ASCII; reg[rrr] = i; } break; } while (1); break; ccl_read_multibyte_character_suspend: src--; if (ccl->last_block) { ic = ccl->eof_ic; goto ccl_repeat; } else CCL_SUSPEND (CCL_STAT_SUSPEND_BY_SRC); break; case CCL_WriteMultibyteChar2: i = reg[RRR]; /* charset */ if (i == CHARSET_ASCII || i == CHARSET_8_BIT_CONTROL || i == CHARSET_8_BIT_GRAPHIC) i = reg[rrr] & 0xFF; else if (CHARSET_DIMENSION (i) == 1) i = ((i - 0x70) << 7) | (reg[rrr] & 0x7F); else if (i < MIN_CHARSET_PRIVATE_DIMENSION2) i = ((i - 0x8F) << 14) | reg[rrr]; else i = ((i - 0xE0) << 14) | reg[rrr]; CCL_WRITE_CHAR (i); break; case CCL_TranslateCharacter: CCL_MAKE_CHAR (reg[RRR], reg[rrr], i); op = translate_char (GET_TRANSLATION_TABLE (reg[Rrr]), i, -1, 0, 0); SPLIT_CHAR (op, reg[RRR], i, j); if (j != -1) i = (i << 7) | j; reg[rrr] = i; break; case CCL_TranslateCharacterConstTbl: op = XINT (ccl_prog[ic]); /* table */ ic++; CCL_MAKE_CHAR (reg[RRR], reg[rrr], i); op = translate_char (GET_TRANSLATION_TABLE (op), i, -1, 0, 0); SPLIT_CHAR (op, reg[RRR], i, j); if (j != -1) i = (i << 7) | j; reg[rrr] = i; break; case CCL_IterateMultipleMap: { Lisp_Object map, content, attrib, value; int point, size, fin_ic; j = XINT (ccl_prog[ic++]); /* number of maps. */ fin_ic = ic + j; op = reg[rrr]; if ((j > reg[RRR]) && (j >= 0)) { ic += reg[RRR]; i = reg[RRR]; } else { reg[RRR] = -1; ic = fin_ic; break; } for (;i < j;i++) { size = XVECTOR (Vcode_conversion_map_vector)->size; point = XINT (ccl_prog[ic++]); if (point >= size) continue; map = XVECTOR (Vcode_conversion_map_vector)->contents[point]; /* Check map varidity. */ if (!CONSP (map)) continue; map = XCDR (map); if (!VECTORP (map)) continue; size = XVECTOR (map)->size; if (size <= 1) continue; content = XVECTOR (map)->contents[0]; /* check map type, [STARTPOINT VAL1 VAL2 ...] or [t ELELMENT STARTPOINT ENDPOINT] */ if (NUMBERP (content)) { point = XUINT (content); point = op - point + 1; if (!((point >= 1) && (point < size))) continue; content = XVECTOR (map)->contents[point]; } else if (EQ (content, Qt)) { if (size != 4) continue; if ((op >= XUINT (XVECTOR (map)->contents[2])) && (op < XUINT (XVECTOR (map)->contents[3]))) content = XVECTOR (map)->contents[1]; else continue; } else continue; if (NILP (content)) continue; else if (NUMBERP (content)) { reg[RRR] = i; reg[rrr] = XINT(content); break; } else if (EQ (content, Qt) || EQ (content, Qlambda)) { reg[RRR] = i; break; } else if (CONSP (content)) { attrib = XCAR (content); value = XCDR (content); if (!NUMBERP (attrib) || !NUMBERP (value)) continue; reg[RRR] = i; reg[rrr] = XUINT (value); break; } } if (i == j) reg[RRR] = -1; ic = fin_ic; } break; case CCL_MapMultiple: { Lisp_Object map, content, attrib, value; int point, size, map_vector_size; int map_set_rest_length, fin_ic; map_set_rest_length = XINT (ccl_prog[ic++]); /* number of maps and separators. */ fin_ic = ic + map_set_rest_length; if ((map_set_rest_length > reg[RRR]) && (reg[RRR] >= 0)) { ic += reg[RRR]; i = reg[RRR]; map_set_rest_length -= i; } else { ic = fin_ic; reg[RRR] = -1; break; } mapping_stack_pointer = mapping_stack; op = reg[rrr]; PUSH_MAPPING_STACK (0, op); reg[RRR] = -1; map_vector_size = XVECTOR (Vcode_conversion_map_vector)->size; for (;map_set_rest_length > 0;i++, map_set_rest_length--) { point = XINT(ccl_prog[ic++]); if (point < 0) { point = -point; if (mapping_stack_pointer >= &mapping_stack[MAX_MAP_SET_LEVEL]) { CCL_INVALID_CMD; } PUSH_MAPPING_STACK (map_set_rest_length - point, reg[rrr]); map_set_rest_length = point + 1; reg[rrr] = op; continue; } if (point >= map_vector_size) continue; map = (XVECTOR (Vcode_conversion_map_vector) ->contents[point]); /* Check map varidity. */ if (!CONSP (map)) continue; map = XCDR (map); if (!VECTORP (map)) continue; size = XVECTOR (map)->size; if (size <= 1) continue; content = XVECTOR (map)->contents[0]; /* check map type, [STARTPOINT VAL1 VAL2 ...] or [t ELEMENT STARTPOINT ENDPOINT] */ if (NUMBERP (content)) { point = XUINT (content); point = op - point + 1; if (!((point >= 1) && (point < size))) continue; content = XVECTOR (map)->contents[point]; } else if (EQ (content, Qt)) { if (size != 4) continue; if ((op >= XUINT (XVECTOR (map)->contents[2])) && (op < XUINT (XVECTOR (map)->contents[3]))) content = XVECTOR (map)->contents[1]; else continue; } else continue; if (NILP (content)) continue; else if (NUMBERP (content)) { op = XINT (content); reg[RRR] = i; i += map_set_rest_length; POP_MAPPING_STACK (map_set_rest_length, reg[rrr]); } else if (CONSP (content)) { attrib = XCAR (content); value = XCDR (content); if (!NUMBERP (attrib) || !NUMBERP (value)) continue; reg[RRR] = i; op = XUINT (value); i += map_set_rest_length; POP_MAPPING_STACK (map_set_rest_length, reg[rrr]); } else if (EQ (content, Qt)) { reg[RRR] = i; op = reg[rrr]; i += map_set_rest_length; POP_MAPPING_STACK (map_set_rest_length, reg[rrr]); } else if (EQ (content, Qlambda)) { reg[RRR] = i; break; } else CCL_INVALID_CMD; } ic = fin_ic; } reg[rrr] = op; break; case CCL_MapSingle: { Lisp_Object map, attrib, value, content; int size, point; j = XINT (ccl_prog[ic++]); /* map_id */ op = reg[rrr]; if (j >= XVECTOR (Vcode_conversion_map_vector)->size) { reg[RRR] = -1; break; } map = XVECTOR (Vcode_conversion_map_vector)->contents[j]; if (!CONSP (map)) { reg[RRR] = -1; break; } map = XCDR (map); if (!VECTORP (map)) { reg[RRR] = -1; break; } size = XVECTOR (map)->size; point = XUINT (XVECTOR (map)->contents[0]); point = op - point + 1; reg[RRR] = 0; if ((size <= 1) || (!((point >= 1) && (point < size)))) reg[RRR] = -1; else { reg[RRR] = 0; content = XVECTOR (map)->contents[point]; if (NILP (content)) reg[RRR] = -1; else if (NUMBERP (content)) reg[rrr] = XINT (content); else if (EQ (content, Qt)); else if (CONSP (content)) { attrib = XCAR (content); value = XCDR (content); if (!NUMBERP (attrib) || !NUMBERP (value)) continue; reg[rrr] = XUINT(value); break; } else reg[RRR] = -1; } } break; default: CCL_INVALID_CMD; } break; default: CCL_INVALID_CMD; } } ccl_error_handler: if (destination) { /* We can insert an error message only if DESTINATION is specified and we still have a room to store the message there. */ char msg[256]; int msglen; if (!dst) dst = destination; switch (ccl->status) { case CCL_STAT_INVALID_CMD: sprintf(msg, "\nCCL: Invalid command %x (ccl_code = %x) at %d.", code & 0x1F, code, this_ic); #ifdef CCL_DEBUG { int i = ccl_backtrace_idx - 1; int j; msglen = strlen (msg); if (dst + msglen <= (dst_bytes ? dst_end : src)) { bcopy (msg, dst, msglen); dst += msglen; } for (j = 0; j < CCL_DEBUG_BACKTRACE_LEN; j++, i--) { if (i < 0) i = CCL_DEBUG_BACKTRACE_LEN - 1; if (ccl_backtrace_table[i] == 0) break; sprintf(msg, " %d", ccl_backtrace_table[i]); msglen = strlen (msg); if (dst + msglen > (dst_bytes ? dst_end : src)) break; bcopy (msg, dst, msglen); dst += msglen; } goto ccl_finish; } #endif break; case CCL_STAT_QUIT: sprintf(msg, "\nCCL: Quited."); break; default: sprintf(msg, "\nCCL: Unknown error type (%d).", ccl->status); } msglen = strlen (msg); if (dst + msglen <= (dst_bytes ? dst_end : src)) { bcopy (msg, dst, msglen); dst += msglen; } } ccl_finish: ccl->ic = ic; ccl->stack_idx = stack_idx; ccl->prog = ccl_prog; if (consumed) *consumed = src - source; return (dst ? dst - destination : 0); } /* Resolve symbols in the specified CCL code (Lisp vector). This function converts symbols of code conversion maps and character translation tables embeded in the CCL code into their ID numbers. The return value is a vector (CCL itself or a new vector in which all symbols are resolved), Qt if resolving of some symbol failed, or nil if CCL contains invalid data. */ static Lisp_Object resolve_symbol_ccl_program (ccl) Lisp_Object ccl; { int i, veclen, unresolved = 0; Lisp_Object result, contents, val; result = ccl; veclen = XVECTOR (result)->size; for (i = 0; i < veclen; i++) { contents = XVECTOR (result)->contents[i]; if (INTEGERP (contents)) continue; else if (CONSP (contents) && SYMBOLP (XCAR (contents)) && SYMBOLP (XCDR (contents))) { /* This is the new style for embedding symbols. The form is (SYMBOL . PROPERTY). (get SYMBOL PROPERTY) should give an index number. */ if (EQ (result, ccl)) result = Fcopy_sequence (ccl); val = Fget (XCAR (contents), XCDR (contents)); if (NATNUMP (val)) XVECTOR (result)->contents[i] = val; else unresolved = 1; continue; } else if (SYMBOLP (contents)) { /* This is the old style for embedding symbols. This style may lead to a bug if, for instance, a translation table and a code conversion map have the same name. */ if (EQ (result, ccl)) result = Fcopy_sequence (ccl); val = Fget (contents, Qtranslation_table_id); if (NATNUMP (val)) XVECTOR (result)->contents[i] = val; else { val = Fget (contents, Qcode_conversion_map_id); if (NATNUMP (val)) XVECTOR (result)->contents[i] = val; else { val = Fget (contents, Qccl_program_idx); if (NATNUMP (val)) XVECTOR (result)->contents[i] = val; else unresolved = 1; } } continue; } return Qnil; } return (unresolved ? Qt : result); } /* Return the compiled code (vector) of CCL program CCL_PROG. CCL_PROG is a name (symbol) of the program or already compiled code. If necessary, resolve symbols in the compiled code to index numbers. If we failed to get the compiled code or to resolve symbols, return Qnil. */ static Lisp_Object ccl_get_compiled_code (ccl_prog) Lisp_Object ccl_prog; { Lisp_Object val, slot; if (VECTORP (ccl_prog)) { val = resolve_symbol_ccl_program (ccl_prog); return (VECTORP (val) ? val : Qnil); } if (!SYMBOLP (ccl_prog)) return Qnil; val = Fget (ccl_prog, Qccl_program_idx); if (! NATNUMP (val) || XINT (val) >= XVECTOR (Vccl_program_table)->size) return Qnil; slot = XVECTOR (Vccl_program_table)->contents[XINT (val)]; if (! VECTORP (slot) || XVECTOR (slot)->size != 3 || ! VECTORP (XVECTOR (slot)->contents[1])) return Qnil; if (NILP (XVECTOR (slot)->contents[2])) { val = resolve_symbol_ccl_program (XVECTOR (slot)->contents[1]); if (! VECTORP (val)) return Qnil; XVECTOR (slot)->contents[1] = val; XVECTOR (slot)->contents[2] = Qt; } return XVECTOR (slot)->contents[1]; } /* Setup fields of the structure pointed by CCL appropriately for the execution of CCL program CCL_PROG. CCL_PROG is the name (symbol) of the CCL program or the already compiled code (vector). Return 0 if we succeed this setup, else return -1. If CCL_PROG is nil, we just reset the structure pointed by CCL. */ int setup_ccl_program (ccl, ccl_prog) struct ccl_program *ccl; Lisp_Object ccl_prog; { int i; if (! NILP (ccl_prog)) { struct Lisp_Vector *vp; ccl_prog = ccl_get_compiled_code (ccl_prog); if (! VECTORP (ccl_prog)) return -1; vp = XVECTOR (ccl_prog); ccl->size = vp->size; ccl->prog = vp->contents; ccl->eof_ic = XINT (vp->contents[CCL_HEADER_EOF]); ccl->buf_magnification = XINT (vp->contents[CCL_HEADER_BUF_MAG]); } ccl->ic = CCL_HEADER_MAIN; for (i = 0; i < 8; i++) ccl->reg[i] = 0; ccl->last_block = 0; ccl->private_state = 0; ccl->status = 0; ccl->stack_idx = 0; ccl->eol_type = CODING_EOL_LF; return 0; } #ifdef emacs DEFUN ("ccl-program-p", Fccl_program_p, Sccl_program_p, 1, 1, 0, "Return t if OBJECT is a CCL program name or a compiled CCL program code.") (object) Lisp_Object object; { Lisp_Object val; if (VECTORP (object)) { val = resolve_symbol_ccl_program (object); return (VECTORP (val) ? Qt : Qnil); } if (!SYMBOLP (object)) return Qnil; val = Fget (object, Qccl_program_idx); return ((! NATNUMP (val) || XINT (val) >= XVECTOR (Vccl_program_table)->size) ? Qnil : Qt); } DEFUN ("ccl-execute", Fccl_execute, Sccl_execute, 2, 2, 0, "Execute CCL-PROGRAM with registers initialized by REGISTERS.\n\ \n\ CCL-PROGRAM is a CCL program name (symbol)\n\ or a compiled code generated by `ccl-compile' (for backward compatibility,\n\ in this case, the overhead of the execution is bigger than the former case).\n\ No I/O commands should appear in CCL-PROGRAM.\n\ \n\ REGISTERS is a vector of [R0 R1 ... R7] where RN is an initial value\n\ of Nth register.\n\ \n\ As side effect, each element of REGISTERS holds the value of\n\ corresponding register after the execution.") (ccl_prog, reg) Lisp_Object ccl_prog, reg; { struct ccl_program ccl; int i; if (setup_ccl_program (&ccl, ccl_prog) < 0) error ("Invalid CCL program"); CHECK_VECTOR (reg, 1); if (XVECTOR (reg)->size != 8) error ("Length of vector REGISTERS is not 9"); for (i = 0; i < 8; i++) ccl.reg[i] = (INTEGERP (XVECTOR (reg)->contents[i]) ? XINT (XVECTOR (reg)->contents[i]) : 0); ccl_driver (&ccl, (char *)0, (char *)0, 0, 0, (int *)0); QUIT; if (ccl.status != CCL_STAT_SUCCESS) error ("Error in CCL program at %dth code", ccl.ic); for (i = 0; i < 8; i++) XSETINT (XVECTOR (reg)->contents[i], ccl.reg[i]); return Qnil; } DEFUN ("ccl-execute-on-string", Fccl_execute_on_string, Sccl_execute_on_string, 3, 5, 0, "Execute CCL-PROGRAM with initial STATUS on STRING.\n\ \n\ CCL-PROGRAM is a symbol registered by register-ccl-program,\n\ or a compiled code generated by `ccl-compile' (for backward compatibility,\n\ in this case, the execution is slower).\n\ \n\ Read buffer is set to STRING, and write buffer is allocated automatically.\n\ \n\ STATUS is a vector of [R0 R1 ... R7 IC], where\n\ R0..R7 are initial values of corresponding registers,\n\ IC is the instruction counter specifying from where to start the program.\n\ If R0..R7 are nil, they are initialized to 0.\n\ If IC is nil, it is initialized to head of the CCL program.\n\ \n\ If optional 4th arg CONTINUE is non-nil, keep IC on read operation\n\ when read buffer is exausted, else, IC is always set to the end of\n\ CCL-PROGRAM on exit.\n\ \n\ It returns the contents of write buffer as a string,\n\ and as side effect, STATUS is updated.\n\ If the optional 5th arg UNIBYTE-P is non-nil, the returned string\n\ is a unibyte string. By default it is a multibyte string.") (ccl_prog, status, str, contin, unibyte_p) Lisp_Object ccl_prog, status, str, contin, unibyte_p; { Lisp_Object val; struct ccl_program ccl; int i, produced; int outbufsize; char *outbuf; struct gcpro gcpro1, gcpro2; if (setup_ccl_program (&ccl, ccl_prog) < 0) error ("Invalid CCL program"); CHECK_VECTOR (status, 1); if (XVECTOR (status)->size != 9) error ("Length of vector STATUS is not 9"); CHECK_STRING (str, 2); GCPRO2 (status, str); for (i = 0; i < 8; i++) { if (NILP (XVECTOR (status)->contents[i])) XSETINT (XVECTOR (status)->contents[i], 0); if (INTEGERP (XVECTOR (status)->contents[i])) ccl.reg[i] = XINT (XVECTOR (status)->contents[i]); } if (INTEGERP (XVECTOR (status)->contents[i])) { i = XFASTINT (XVECTOR (status)->contents[8]); if (ccl.ic < i && i < ccl.size) ccl.ic = i; } outbufsize = STRING_BYTES (XSTRING (str)) * ccl.buf_magnification + 256; outbuf = (char *) xmalloc (outbufsize); if (!outbuf) error ("Not enough memory"); ccl.last_block = NILP (contin); produced = ccl_driver (&ccl, XSTRING (str)->data, outbuf, STRING_BYTES (XSTRING (str)), outbufsize, (int *)0); for (i = 0; i < 8; i++) XSET (XVECTOR (status)->contents[i], Lisp_Int, ccl.reg[i]); XSETINT (XVECTOR (status)->contents[8], ccl.ic); UNGCPRO; if (NILP (unibyte_p)) val = make_string (outbuf, produced); else val = make_unibyte_string (outbuf, produced); free (outbuf); QUIT; if (ccl.status != CCL_STAT_SUCCESS && ccl.status != CCL_STAT_SUSPEND_BY_SRC && ccl.status != CCL_STAT_SUSPEND_BY_DST) error ("Error in CCL program at %dth code", ccl.ic); return val; } DEFUN ("register-ccl-program", Fregister_ccl_program, Sregister_ccl_program, 2, 2, 0, "Register CCL program CCL_PROG as NAME in `ccl-program-table'.\n\ CCL_PROG should be a compiled CCL program (vector), or nil.\n\ If it is nil, just reserve NAME as a CCL program name.\n\ Return index number of the registered CCL program.") (name, ccl_prog) Lisp_Object name, ccl_prog; { int len = XVECTOR (Vccl_program_table)->size; int idx; Lisp_Object resolved; CHECK_SYMBOL (name, 0); resolved = Qnil; if (!NILP (ccl_prog)) { CHECK_VECTOR (ccl_prog, 1); resolved = resolve_symbol_ccl_program (ccl_prog); if (! NILP (resolved)) { ccl_prog = resolved; resolved = Qt; } } for (idx = 0; idx < len; idx++) { Lisp_Object slot; slot = XVECTOR (Vccl_program_table)->contents[idx]; if (!VECTORP (slot)) /* This is the first unsed slot. Register NAME here. */ break; if (EQ (name, XVECTOR (slot)->contents[0])) { /* Update this slot. */ XVECTOR (slot)->contents[1] = ccl_prog; XVECTOR (slot)->contents[2] = resolved; return make_number (idx); } } if (idx == len) { /* Extend the table. */ Lisp_Object new_table; int j; new_table = Fmake_vector (make_number (len * 2), Qnil); for (j = 0; j < len; j++) XVECTOR (new_table)->contents[j] = XVECTOR (Vccl_program_table)->contents[j]; Vccl_program_table = new_table; } { Lisp_Object elt; elt = Fmake_vector (make_number (3), Qnil); XVECTOR (elt)->contents[0] = name; XVECTOR (elt)->contents[1] = ccl_prog; XVECTOR (elt)->contents[2] = resolved; XVECTOR (Vccl_program_table)->contents[idx] = elt; } Fput (name, Qccl_program_idx, make_number (idx)); return make_number (idx); } /* Register code conversion map. A code conversion map consists of numbers, Qt, Qnil, and Qlambda. The first element is start code point. The rest elements are mapped numbers. Symbol t means to map to an original number before mapping. Symbol nil means that the corresponding element is empty. Symbol lambda menas to terminate mapping here. */ DEFUN ("register-code-conversion-map", Fregister_code_conversion_map, Sregister_code_conversion_map, 2, 2, 0, "Register SYMBOL as code conversion map MAP.\n\ Return index number of the registered map.") (symbol, map) Lisp_Object symbol, map; { int len = XVECTOR (Vcode_conversion_map_vector)->size; int i; Lisp_Object index; CHECK_SYMBOL (symbol, 0); CHECK_VECTOR (map, 1); for (i = 0; i < len; i++) { Lisp_Object slot = XVECTOR (Vcode_conversion_map_vector)->contents[i]; if (!CONSP (slot)) break; if (EQ (symbol, XCAR (slot))) { index = make_number (i); XCDR (slot) = map; Fput (symbol, Qcode_conversion_map, map); Fput (symbol, Qcode_conversion_map_id, index); return index; } } if (i == len) { Lisp_Object new_vector = Fmake_vector (make_number (len * 2), Qnil); int j; for (j = 0; j < len; j++) XVECTOR (new_vector)->contents[j] = XVECTOR (Vcode_conversion_map_vector)->contents[j]; Vcode_conversion_map_vector = new_vector; } index = make_number (i); Fput (symbol, Qcode_conversion_map, map); Fput (symbol, Qcode_conversion_map_id, index); XVECTOR (Vcode_conversion_map_vector)->contents[i] = Fcons (symbol, map); return index; } void syms_of_ccl () { staticpro (&Vccl_program_table); Vccl_program_table = Fmake_vector (make_number (32), Qnil); Qccl_program = intern ("ccl-program"); staticpro (&Qccl_program); Qccl_program_idx = intern ("ccl-program-idx"); staticpro (&Qccl_program_idx); Qcode_conversion_map = intern ("code-conversion-map"); staticpro (&Qcode_conversion_map); Qcode_conversion_map_id = intern ("code-conversion-map-id"); staticpro (&Qcode_conversion_map_id); DEFVAR_LISP ("code-conversion-map-vector", &Vcode_conversion_map_vector, "Vector of code conversion maps."); Vcode_conversion_map_vector = Fmake_vector (make_number (16), Qnil); DEFVAR_LISP ("font-ccl-encoder-alist", &Vfont_ccl_encoder_alist, "Alist of fontname patterns vs corresponding CCL program.\n\ Each element looks like (REGEXP . CCL-CODE),\n\ where CCL-CODE is a compiled CCL program.\n\ When a font whose name matches REGEXP is used for displaying a character,\n\ CCL-CODE is executed to calculate the code point in the font\n\ from the charset number and position code(s) of the character which are set\n\ in CCL registers R0, R1, and R2 before the execution.\n\ The code point in the font is set in CCL registers R1 and R2\n\ when the execution terminated.\n\ If the font is single-byte font, the register R2 is not used."); Vfont_ccl_encoder_alist = Qnil; defsubr (&Sccl_program_p); defsubr (&Sccl_execute); defsubr (&Sccl_execute_on_string); defsubr (&Sregister_ccl_program); defsubr (&Sregister_code_conversion_map); } #endif /* emacs */