Mercurial > emacs
view lisp/ldefs-boot.el @ 106972:d026329addd9
* keymap.c (shadow_lookup): Add `remap' arg.
(describe_map, describe_vector): Update calls to shadow_lookup.
(Fwhere_is_internal): Fix up handling of `remapped_sequences' and
`remapped' so this flag is applicable to `sequence'. Be careful to
perform remapping during shadow_lookup check of remapped_equences.
| author | Stefan Monnier <monnier@iro.umontreal.ca> |
|---|---|
| date | Sun, 24 Jan 2010 03:42:22 -0500 |
| parents | 8c60b70f9505 |
| children | 33c9a5d2a6ce |
line wrap: on
line source
;;; loaddefs.el --- automatically extracted autoloads ;; ;;; Code: ;;;### (autoloads (5x5-crack 5x5-crack-xor-mutate 5x5-crack-mutating-best ;;;;;; 5x5-crack-mutating-current 5x5-crack-randomly 5x5) "5x5" ;;;;;; "play/5x5.el" (19259 35392)) ;;; Generated autoloads from play/5x5.el (autoload '5x5 "5x5" "\ Play 5x5. The object of 5x5 is very simple, by moving around the grid and flipping squares you must fill the grid. 5x5 keyboard bindings are: \\<5x5-mode-map> Flip \\[5x5-flip-current] Move up \\[5x5-up] Move down \\[5x5-down] Move left \\[5x5-left] Move right \\[5x5-right] Start new game \\[5x5-new-game] New game with random grid \\[5x5-randomize] Random cracker \\[5x5-crack-randomly] Mutate current cracker \\[5x5-crack-mutating-current] Mutate best cracker \\[5x5-crack-mutating-best] Mutate xor cracker \\[5x5-crack-xor-mutate] Quit current game \\[5x5-quit-game] \(fn &optional SIZE)" t nil) (autoload '5x5-crack-randomly "5x5" "\ Attempt to crack 5x5 using random solutions. \(fn)" t nil) (autoload '5x5-crack-mutating-current "5x5" "\ Attempt to crack 5x5 by mutating the current solution. \(fn)" t nil) (autoload '5x5-crack-mutating-best "5x5" "\ Attempt to crack 5x5 by mutating the best solution. \(fn)" t nil) (autoload '5x5-crack-xor-mutate "5x5" "\ Attempt to crack 5x5 by xoring the current and best solution. Mutate the result. \(fn)" t nil) (autoload '5x5-crack "5x5" "\ Attempt to find a solution for 5x5. 5x5-crack takes the argument BREEDER which should be a function that takes two parameters, the first will be a grid vector array that is the current solution and the second will be the best solution so far. The function should return a grid vector array that is the new solution. \(fn BREEDER)" t nil) ;;;*** ;;;### (autoloads (list-one-abbrev-table) "abbrevlist" "abbrevlist.el" ;;;;;; (19259 35392)) ;;; Generated autoloads from abbrevlist.el (autoload 'list-one-abbrev-table "abbrevlist" "\ Display alphabetical listing of ABBREV-TABLE in buffer OUTPUT-BUFFER. \(fn ABBREV-TABLE OUTPUT-BUFFER)" nil nil) ;;;*** ;;;### (autoloads (ada-mode ada-add-extensions) "ada-mode" "progmodes/ada-mode.el" ;;;;;; (19259 35392)) ;;; Generated autoloads from progmodes/ada-mode.el (autoload 'ada-add-extensions "ada-mode" "\ Define SPEC and BODY as being valid extensions for Ada files. Going from body to spec with `ff-find-other-file' used these extensions. SPEC and BODY are two regular expressions that must match against the file name. \(fn SPEC BODY)" nil nil) (autoload 'ada-mode "ada-mode" "\ Ada mode is the major mode for editing Ada code. \(fn)" t nil) ;;;*** ;;;### (autoloads (ada-header) "ada-stmt" "progmodes/ada-stmt.el" ;;;;;; (19259 35392)) ;;; Generated autoloads from progmodes/ada-stmt.el (autoload 'ada-header "ada-stmt" "\ Insert a descriptive header at the top of the file. \(fn)" t nil) ;;;*** ;;;### (autoloads (ada-find-file) "ada-xref" "progmodes/ada-xref.el" ;;;;;; (19259 35392)) ;;; Generated autoloads from progmodes/ada-xref.el (autoload 'ada-find-file "ada-xref" "\ Open FILENAME, from anywhere in the source path. Completion is available. \(fn FILENAME)" t nil) ;;;*** ;;;### (autoloads (change-log-merge add-log-current-defun change-log-mode ;;;;;; add-change-log-entry-other-window add-change-log-entry find-change-log ;;;;;; prompt-for-change-log-name add-log-mailing-address add-log-full-name ;;;;;; add-log-current-defun-function) "add-log" "add-log.el" (19259 ;;;;;; 35392)) ;;; Generated autoloads from add-log.el (put 'change-log-default-name 'safe-local-variable 'string-or-null-p) (defvar add-log-current-defun-function nil "\ If non-nil, function to guess name of surrounding function. It is used by `add-log-current-defun' in preference to built-in rules. Returns function's name as a string, or nil if outside a function.") (custom-autoload 'add-log-current-defun-function "add-log" t) (defvar add-log-full-name nil "\ Full name of user, for inclusion in ChangeLog daily headers. This defaults to the value returned by the function `user-full-name'.") (custom-autoload 'add-log-full-name "add-log" t) (defvar add-log-mailing-address nil "\ Email addresses of user, for inclusion in ChangeLog headers. This defaults to the value of `user-mail-address'. In addition to being a simple string, this value can also be a list. All elements will be recognized as referring to the same user; when creating a new ChangeLog entry, one element will be chosen at random.") (custom-autoload 'add-log-mailing-address "add-log" t) (autoload 'prompt-for-change-log-name "add-log" "\ Prompt for a change log name. \(fn)" nil nil) (autoload 'find-change-log "add-log" "\ Find a change log file for \\[add-change-log-entry] and return the name. Optional arg FILE-NAME specifies the file to use. If FILE-NAME is nil, use the value of `change-log-default-name'. If `change-log-default-name' is nil, behave as though it were 'ChangeLog' \(or whatever we use on this operating system). If `change-log-default-name' contains a leading directory component, then simply find it in the current directory. Otherwise, search in the current directory and its successive parents for a file so named. Once a file is found, `change-log-default-name' is set locally in the current buffer to the complete file name. Optional arg BUFFER-FILE overrides `buffer-file-name'. \(fn &optional FILE-NAME BUFFER-FILE)" nil nil) (autoload 'add-change-log-entry "add-log" "\ Find change log file, and add an entry for today and an item for this file. Optional arg WHOAMI (interactive prefix) non-nil means prompt for user name and email (stored in `add-log-full-name' and `add-log-mailing-address'). Second arg FILE-NAME is file name of the change log. If nil, use the value of `change-log-default-name'. Third arg OTHER-WINDOW non-nil means visit in other window. Fourth arg NEW-ENTRY non-nil means always create a new entry at the front; never append to an existing entry. Option `add-log-keep-changes-together' otherwise affects whether a new entry is created. Fifth arg PUT-NEW-ENTRY-ON-NEW-LINE non-nil means that if a new entry is created, put it on a new line by itself, do not put it after a comma on an existing line. Option `add-log-always-start-new-record' non-nil means always create a new record, even when the last record was made on the same date and by the same person. The change log file can start with a copyright notice and a copying permission notice. The first blank line indicates the end of these notices. Today's date is calculated according to `add-log-time-zone-rule' if non-nil, otherwise in local time. \(fn &optional WHOAMI FILE-NAME OTHER-WINDOW NEW-ENTRY PUT-NEW-ENTRY-ON-NEW-LINE)" t nil) (autoload 'add-change-log-entry-other-window "add-log" "\ Find change log file in other window and add entry and item. This is just like `add-change-log-entry' except that it displays the change log file in another window. \(fn &optional WHOAMI FILE-NAME)" t nil) (autoload 'change-log-mode "add-log" "\ Major mode for editing change logs; like Indented Text mode. Prevents numeric backups and sets `left-margin' to 8 and `fill-column' to 74. New log entries are usually made with \\[add-change-log-entry] or \\[add-change-log-entry-other-window]. Each entry behaves as a paragraph, and the entries for one day as a page. Runs `change-log-mode-hook'. \\{change-log-mode-map} \(fn)" t nil) (defvar add-log-lisp-like-modes '(emacs-lisp-mode lisp-mode scheme-mode dsssl-mode lisp-interaction-mode) "\ *Modes that look like Lisp to `add-log-current-defun'.") (defvar add-log-c-like-modes '(c-mode c++-mode c++-c-mode objc-mode) "\ *Modes that look like C to `add-log-current-defun'.") (defvar add-log-tex-like-modes '(TeX-mode plain-TeX-mode LaTeX-mode tex-mode) "\ *Modes that look like TeX to `add-log-current-defun'.") (autoload 'add-log-current-defun "add-log" "\ Return name of function definition point is in, or nil. Understands C, Lisp, LaTeX (\"functions\" are chapters, sections, ...), Texinfo (@node titles) and Perl. Other modes are handled by a heuristic that looks in the 10K before point for uppercase headings starting in the first column or identifiers followed by `:' or `='. See variables `add-log-current-defun-header-regexp' and `add-log-current-defun-function'. Has a preference of looking backwards. \(fn)" nil nil) (autoload 'change-log-merge "add-log" "\ Merge the contents of change log file OTHER-LOG with this buffer. Both must be found in Change Log mode (since the merging depends on the appropriate motion commands). OTHER-LOG can be either a file name or a buffer. Entries are inserted in chronological order. Both the current and old-style time formats for entries are supported. \(fn OTHER-LOG)" t nil) ;;;*** ;;;### (autoloads (defadvice ad-activate ad-add-advice ad-disable-advice ;;;;;; ad-enable-advice ad-default-compilation-action ad-redefinition-action) ;;;;;; "advice" "emacs-lisp/advice.el" (19259 35392)) ;;; Generated autoloads from emacs-lisp/advice.el (defvar ad-redefinition-action 'warn "\ Defines what to do with redefinitions during Advice de/activation. Redefinition occurs if a previously activated function that already has an original definition associated with it gets redefined and then de/activated. In such a case we can either accept the current definition as the new original definition, discard the current definition and replace it with the old original, or keep it and raise an error. The values `accept', `discard', `error' or `warn' govern what will be done. `warn' is just like `accept' but it additionally prints a warning message. All other values will be interpreted as `error'.") (custom-autoload 'ad-redefinition-action "advice" t) (defvar ad-default-compilation-action 'maybe "\ Defines whether to compile advised definitions during activation. A value of `always' will result in unconditional compilation, `never' will always avoid compilation, `maybe' will compile if the byte-compiler is already loaded, and `like-original' will compile if the original definition of the advised function is compiled or a built-in function. Every other value will be interpreted as `maybe'. This variable will only be considered if the COMPILE argument of `ad-activate' was supplied as nil.") (custom-autoload 'ad-default-compilation-action "advice" t) (autoload 'ad-enable-advice "advice" "\ Enables the advice of FUNCTION with CLASS and NAME. \(fn FUNCTION CLASS NAME)" t nil) (autoload 'ad-disable-advice "advice" "\ Disable the advice of FUNCTION with CLASS and NAME. \(fn FUNCTION CLASS NAME)" t nil) (autoload 'ad-add-advice "advice" "\ Add a piece of ADVICE to FUNCTION's list of advices in CLASS. If FUNCTION already has one or more pieces of advice of the specified CLASS then POSITION determines where the new piece will go. The value of POSITION can either be `first', `last' or a number where 0 corresponds to `first'. Numbers outside the range will be mapped to the closest extreme position. If there was already a piece of ADVICE with the same name, then the position argument will be ignored and the old advice will be overwritten with the new one. If the FUNCTION was not advised already, then its advice info will be initialized. Redefining a piece of advice whose name is part of the cache-id will clear the cache. \(fn FUNCTION ADVICE CLASS POSITION)" nil nil) (autoload 'ad-activate "advice" "\ Activate all the advice information of an advised FUNCTION. If FUNCTION has a proper original definition then an advised definition will be generated from FUNCTION's advice info and the definition of FUNCTION will be replaced with it. If a previously cached advised definition was available, it will be used. The optional COMPILE argument determines whether the resulting function or a compilable cached definition will be compiled. If it is negative no compilation will be performed, if it is positive or otherwise non-nil the resulting function will be compiled, if it is nil the behavior depends on the value of `ad-default-compilation-action' (which see). Activation of an advised function that has an advice info but no actual pieces of advice is equivalent to a call to `ad-unadvise'. Activation of an advised function that has actual pieces of advice but none of them are enabled is equivalent to a call to `ad-deactivate'. The current advised definition will always be cached for later usage. \(fn FUNCTION &optional COMPILE)" t nil) (autoload 'defadvice "advice" "\ Define a piece of advice for FUNCTION (a symbol). The syntax of `defadvice' is as follows: (defadvice FUNCTION (CLASS NAME [POSITION] [ARGLIST] FLAG...) [DOCSTRING] [INTERACTIVE-FORM] BODY...) FUNCTION ::= Name of the function to be advised. CLASS ::= `before' | `around' | `after' | `activation' | `deactivation'. NAME ::= Non-nil symbol that names this piece of advice. POSITION ::= `first' | `last' | NUMBER. Optional, defaults to `first', see also `ad-add-advice'. ARGLIST ::= An optional argument list to be used for the advised function instead of the argument list of the original. The first one found in before/around/after-advices will be used. FLAG ::= `protect'|`disable'|`activate'|`compile'|`preactivate'|`freeze'. All flags can be specified with unambiguous initial substrings. DOCSTRING ::= Optional documentation for this piece of advice. INTERACTIVE-FORM ::= Optional interactive form to be used for the advised function. The first one found in before/around/after-advices will be used. BODY ::= Any s-expression. Semantics of the various flags: `protect': The piece of advice will be protected against non-local exits in any code that precedes it. If any around-advice of a function is protected then automatically all around-advices will be protected (the complete onion). `activate': All advice of FUNCTION will be activated immediately if FUNCTION has been properly defined prior to this application of `defadvice'. `compile': In conjunction with `activate' specifies that the resulting advised function should be compiled. `disable': The defined advice will be disabled, hence, it will not be used during activation until somebody enables it. `preactivate': Preactivates the advised FUNCTION at macro-expansion/compile time. This generates a compiled advised definition according to the current advice state that will be used during activation if appropriate. Only use this if the `defadvice' gets actually compiled. `freeze': Expands the `defadvice' into a redefining `defun/defmacro' according to this particular single advice. No other advice information will be saved. Frozen advices cannot be undone, they behave like a hard redefinition of the advised function. `freeze' implies `activate' and `preactivate'. The documentation of the advised function can be dumped onto the `DOC' file during preloading. See Info node `(elisp)Advising Functions' for comprehensive documentation. usage: (defadvice FUNCTION (CLASS NAME [POSITION] [ARGLIST] FLAG...) [DOCSTRING] [INTERACTIVE-FORM] BODY...) \(fn FUNCTION ARGS &rest BODY)" nil (quote macro)) ;;;*** ;;;### (autoloads (align-newline-and-indent align-unhighlight-rule ;;;;;; align-highlight-rule align-current align-entire align-regexp ;;;;;; align) "align" "align.el" (19259 35392)) ;;; Generated autoloads from align.el (autoload 'align "align" "\ Attempt to align a region based on a set of alignment rules. BEG and END mark the region. If BEG and END are specifically set to nil (this can only be done programmatically), the beginning and end of the current alignment section will be calculated based on the location of point, and the value of `align-region-separate' (or possibly each rule's `separate' attribute). If SEPARATE is non-nil, it overrides the value of `align-region-separate' for all rules, except those that have their `separate' attribute set. RULES and EXCLUDE-RULES, if either is non-nil, will replace the default rule lists defined in `align-rules-list' and `align-exclude-rules-list'. See `align-rules-list' for more details on the format of these lists. \(fn BEG END &optional SEPARATE RULES EXCLUDE-RULES)" t nil) (autoload 'align-regexp "align" "\ Align the current region using an ad-hoc rule read from the minibuffer. BEG and END mark the limits of the region. This function will prompt for the REGEXP to align with. If no prefix arg was specified, you only need to supply the characters to be lined up and any preceding whitespace is replaced. If a prefix arg was specified, the full regexp with parenthesized whitespace should be supplied; it will also prompt for which parenthesis GROUP within REGEXP to modify, the amount of SPACING to use, and whether or not to REPEAT the rule throughout the line. See `align-rules-list' for more information about these options. For example, let's say you had a list of phone numbers, and wanted to align them so that the opening parentheses would line up: Fred (123) 456-7890 Alice (123) 456-7890 Mary-Anne (123) 456-7890 Joe (123) 456-7890 There is no predefined rule to handle this, but you could easily do it using a REGEXP like \"(\". All you would have to do is to mark the region, call `align-regexp' and type in that regular expression. \(fn BEG END REGEXP &optional GROUP SPACING REPEAT)" t nil) (autoload 'align-entire "align" "\ Align the selected region as if it were one alignment section. BEG and END mark the extent of the region. If RULES or EXCLUDE-RULES is set to a list of rules (see `align-rules-list'), it can be used to override the default alignment rules that would have been used to align that section. \(fn BEG END &optional RULES EXCLUDE-RULES)" t nil) (autoload 'align-current "align" "\ Call `align' on the current alignment section. This function assumes you want to align only the current section, and so saves you from having to specify the region. If RULES or EXCLUDE-RULES is set to a list of rules (see `align-rules-list'), it can be used to override the default alignment rules that would have been used to align that section. \(fn &optional RULES EXCLUDE-RULES)" t nil) (autoload 'align-highlight-rule "align" "\ Highlight the whitespace which a given rule would have modified. BEG and END mark the extent of the region. TITLE identifies the rule that should be highlighted. If RULES or EXCLUDE-RULES is set to a list of rules (see `align-rules-list'), it can be used to override the default alignment rules that would have been used to identify the text to be colored. \(fn BEG END TITLE &optional RULES EXCLUDE-RULES)" t nil) (autoload 'align-unhighlight-rule "align" "\ Remove any highlighting that was added by `align-highlight-rule'. \(fn)" t nil) (autoload 'align-newline-and-indent "align" "\ A replacement function for `newline-and-indent', aligning as it goes. \(fn)" t nil) ;;;*** ;;;### (autoloads (outlineify-sticky allout-mode) "allout" "allout.el" ;;;;;; (19259 35393)) ;;; Generated autoloads from allout.el (put 'allout-use-hanging-indents 'safe-local-variable (if (fboundp 'booleanp) 'booleanp '(lambda (x) (member x '(t nil))))) (put 'allout-reindent-bodies 'safe-local-variable '(lambda (x) (memq x '(nil t text force)))) (put 'allout-show-bodies 'safe-local-variable (if (fboundp 'booleanp) 'booleanp '(lambda (x) (member x '(t nil))))) (put 'allout-header-prefix 'safe-local-variable 'stringp) (put 'allout-primary-bullet 'safe-local-variable 'stringp) (put 'allout-plain-bullets-string 'safe-local-variable 'stringp) (put 'allout-distinctive-bullets-string 'safe-local-variable 'stringp) (put 'allout-use-mode-specific-leader 'safe-local-variable '(lambda (x) (or (memq x '(t nil allout-mode-leaders comment-start)) (stringp x)))) (put 'allout-old-style-prefixes 'safe-local-variable (if (fboundp 'booleanp) 'booleanp '(lambda (x) (member x '(t nil))))) (put 'allout-stylish-prefixes 'safe-local-variable (if (fboundp 'booleanp) 'booleanp '(lambda (x) (member x '(t nil))))) (put 'allout-numbered-bullet 'safe-local-variable (if (fboundp 'string-or-null-p) 'string-or-null-p '(lambda (x) (or (stringp x) (null x))))) (put 'allout-file-xref-bullet 'safe-local-variable (if (fboundp 'string-or-null-p) 'string-or-null-p '(lambda (x) (or (stringp x) (null x))))) (put 'allout-presentation-padding 'safe-local-variable 'integerp) (put 'allout-layout 'safe-local-variable '(lambda (x) (or (numberp x) (listp x) (memq x '(: * + -))))) (put 'allout-passphrase-verifier-string 'safe-local-variable 'stringp) (put 'allout-passphrase-hint-string 'safe-local-variable 'stringp) (autoload 'allout-mode "allout" "\ Toggle minor mode for controlling exposure and editing of text outlines. \\<allout-mode-map> Optional prefix argument TOGGLE forces the mode to re-initialize if it is positive, otherwise it turns the mode off. Allout outline mode always runs as a minor mode. Allout outline mode provides extensive outline oriented formatting and manipulation. It enables structural editing of outlines, as well as navigation and exposure. It also is specifically aimed at accommodating syntax-sensitive text like programming languages. (For an example, see the allout code itself, which is organized as an allout outline.) In addition to typical outline navigation and exposure, allout includes: - topic-oriented authoring, including keystroke-based topic creation, repositioning, promotion/demotion, cut, and paste - incremental search with dynamic exposure and reconcealment of hidden text - adjustable format, so programming code can be developed in outline-structure - easy topic encryption and decryption - \"Hot-spot\" operation, for single-keystroke maneuvering and exposure control - integral outline layout, for automatic initial exposure when visiting a file - independent extensibility, using comprehensive exposure and authoring hooks and many other features. Below is a description of the key bindings, and then explanation of special `allout-mode' features and terminology. See also the outline menubar additions for quick reference to many of the features, and see the docstring of the function `allout-init' for instructions on priming your emacs session for automatic activation of `allout-mode'. The bindings are dictated by the customizable `allout-keybindings-list' variable. We recommend customizing `allout-command-prefix' to use just `\\C-c' as the command prefix, if the allout bindings don't conflict with any personal bindings you have on \\C-c. In any case, outline structure navigation and authoring is simplified by positioning the cursor on an item's bullet character, the \"hot-spot\" -- then you can invoke allout commands with just the un-prefixed, un-control-shifted command letters. This is described further in the HOT-SPOT Operation section. Exposure Control: ---------------- \\[allout-hide-current-subtree] `allout-hide-current-subtree' \\[allout-show-children] `allout-show-children' \\[allout-show-current-subtree] `allout-show-current-subtree' \\[allout-show-current-entry] `allout-show-current-entry' \\[allout-show-all] `allout-show-all' Navigation: ---------- \\[allout-next-visible-heading] `allout-next-visible-heading' \\[allout-previous-visible-heading] `allout-previous-visible-heading' \\[allout-up-current-level] `allout-up-current-level' \\[allout-forward-current-level] `allout-forward-current-level' \\[allout-backward-current-level] `allout-backward-current-level' \\[allout-end-of-entry] `allout-end-of-entry' \\[allout-beginning-of-current-entry] `allout-beginning-of-current-entry' (alternately, goes to hot-spot) \\[allout-beginning-of-line] `allout-beginning-of-line' -- like regular beginning-of-line, but if immediately repeated cycles to the beginning of the current item and then to the hot-spot (if `allout-beginning-of-line-cycles' is set). Topic Header Production: ----------------------- \\[allout-open-sibtopic] `allout-open-sibtopic' Create a new sibling after current topic. \\[allout-open-subtopic] `allout-open-subtopic' ... an offspring of current topic. \\[allout-open-supertopic] `allout-open-supertopic' ... a sibling of the current topic's parent. Topic Level and Prefix Adjustment: --------------------------------- \\[allout-shift-in] `allout-shift-in' Shift current topic and all offspring deeper \\[allout-shift-out] `allout-shift-out' ... less deep \\[allout-rebullet-current-heading] `allout-rebullet-current-heading' Prompt for alternate bullet for current topic \\[allout-rebullet-topic] `allout-rebullet-topic' Reconcile bullets of topic and its' offspring -- distinctive bullets are not changed, others are alternated according to nesting depth. \\[allout-number-siblings] `allout-number-siblings' Number bullets of topic and siblings -- the offspring are not affected. With repeat count, revoke numbering. Topic-oriented Killing and Yanking: ---------------------------------- \\[allout-kill-topic] `allout-kill-topic' Kill current topic, including offspring. \\[allout-copy-topic-as-kill] `allout-copy-topic-as-kill' Copy current topic, including offspring. \\[allout-kill-line] `allout-kill-line' kill-line, attending to outline structure. \\[allout-copy-line-as-kill] `allout-copy-line-as-kill' Copy line but don't delete it. \\[allout-yank] `allout-yank' Yank, adjusting depth of yanked topic to depth of heading if yanking into bare topic heading (ie, prefix sans text). \\[allout-yank-pop] `allout-yank-pop' Is to allout-yank as yank-pop is to yank Topic-oriented Encryption: ------------------------- \\[allout-toggle-current-subtree-encryption] `allout-toggle-current-subtree-encryption' Encrypt/Decrypt topic content Misc commands: ------------- M-x outlineify-sticky Activate outline mode for current buffer, and establish a default file-var setting for `allout-layout'. \\[allout-mark-topic] `allout-mark-topic' \\[allout-copy-exposed-to-buffer] `allout-copy-exposed-to-buffer' Duplicate outline, sans concealed text, to buffer with name derived from derived from that of current buffer -- \"*BUFFERNAME exposed*\". \\[allout-flatten-exposed-to-buffer] `allout-flatten-exposed-to-buffer' Like above 'copy-exposed', but convert topic prefixes to section.subsection... numeric format. \\[eval-expression] (allout-init t) Setup Emacs session for outline mode auto-activation. Topic Encryption Outline mode supports gpg encryption of topics, with support for symmetric and key-pair modes, passphrase timeout, passphrase consistency checking, user-provided hinting for symmetric key mode, and auto-encryption of topics pending encryption on save. Topics pending encryption are, by default, automatically encrypted during file saves. If the contents of the topic containing the cursor was encrypted for a save, it is automatically decrypted for continued editing. The aim of these measures is reliable topic privacy while preventing accidents like neglected encryption before saves, forgetting which passphrase was used, and other practical pitfalls. See `allout-toggle-current-subtree-encryption' function docstring and `allout-encrypt-unencrypted-on-saves' customization variable for details. HOT-SPOT Operation Hot-spot operation provides a means for easy, single-keystroke outline navigation and exposure control. When the text cursor is positioned directly on the bullet character of a topic, regular characters (a to z) invoke the commands of the corresponding allout-mode keymap control chars. For example, \"f\" would invoke the command typically bound to \"C-c<space>C-f\" \(\\[allout-forward-current-level] `allout-forward-current-level'). Thus, by positioning the cursor on a topic bullet, you can execute the outline navigation and manipulation commands with a single keystroke. Regular navigation keys (eg, \\[forward-char], \\[next-line]) don't get this special translation, so you can use them to get out of the hot-spot and back to normal editing operation. In allout-mode, the normal beginning-of-line command (\\[allout-beginning-of-line]) is replaced with one that makes it easy to get to the hot-spot. If you repeat it immediately it cycles (if `allout-beginning-of-line-cycles' is set) to the beginning of the item and then, if you hit it again immediately, to the hot-spot. Similarly, `allout-beginning-of-current-entry' \(\\[allout-beginning-of-current-entry]) moves to the hot-spot when the cursor is already located at the beginning of the current entry. Extending Allout Allout exposure and authoring activites all have associated hooks, by which independent code can cooperate with allout without changes to the allout core. Here are key ones: `allout-mode-hook' `allout-mode-deactivate-hook' `allout-exposure-change-hook' `allout-structure-added-hook' `allout-structure-deleted-hook' `allout-structure-shifted-hook' Terminology Topic hierarchy constituents -- TOPICS and SUBTOPICS: ITEM: A unitary outline element, including the HEADER and ENTRY text. TOPIC: An ITEM and any ITEMs contained within it, ie having greater DEPTH and with no intervening items of lower DEPTH than the container. CURRENT ITEM: The visible ITEM most immediately containing the cursor. DEPTH: The degree of nesting of an ITEM; it increases with containment. The DEPTH is determined by the HEADER PREFIX. The DEPTH is also called the: LEVEL: The same as DEPTH. ANCESTORS: Those ITEMs whose TOPICs contain an ITEM. PARENT: An ITEM's immediate ANCESTOR. It has a DEPTH one less than that of the ITEM. OFFSPRING: The ITEMs contained within an ITEM's TOPIC. SUBTOPIC: An OFFSPRING of its ANCESTOR TOPICs. CHILD: An immediate SUBTOPIC of its PARENT. SIBLINGS: TOPICs having the same PARENT and DEPTH. Topic text constituents: HEADER: The first line of an ITEM, include the ITEM PREFIX and HEADER text. ENTRY: The text content of an ITEM, before any OFFSPRING, but including the HEADER text and distinct from the ITEM PREFIX. BODY: Same as ENTRY. PREFIX: The leading text of an ITEM which distinguishes it from normal ENTRY text. Allout recognizes the outline structure according to the strict PREFIX format. It consists of a PREFIX-LEAD string, PREFIX-PADDING, and a BULLET. The BULLET might be followed by a number, indicating the ordinal number of the topic among its siblings, or an asterisk indicating encryption, plus an optional space. After that is the ITEM HEADER text, which is not part of the PREFIX. The relative length of the PREFIX determines the nesting DEPTH of the ITEM. PREFIX-LEAD: The string at the beginning of a HEADER PREFIX, by default a `.'. It can be customized by changing the setting of `allout-header-prefix' and then reinitializing `allout-mode'. When the PREFIX-LEAD is set to the comment-string of a programming language, outline structuring can be embedded in program code without interfering with processing of the text (by emacs or the language processor) as program code. This setting happens automatically when allout mode is used in programming-mode buffers. See `allout-use-mode-specific-leader' docstring for more detail. PREFIX-PADDING: Spaces or asterisks which separate the PREFIX-LEAD and the bullet, determining the ITEM's DEPTH. BULLET: A character at the end of the ITEM PREFIX, it must be one of the characters listed on `allout-plain-bullets-string' or `allout-distinctive-bullets-string'. When creating a TOPIC, plain BULLETs are by default used, according to the DEPTH of the TOPIC. Choice among the distinctive BULLETs is offered when you provide a universal argugment (\\[universal-argument]) to the TOPIC creation command, or when explictly rebulleting a TOPIC. The significance of the various distinctive bullets is purely by convention. See the documentation for the above bullet strings for more details. EXPOSURE: The state of a TOPIC which determines the on-screen visibility of its OFFSPRING and contained ENTRY text. CONCEALED: TOPICs and ENTRY text whose EXPOSURE is inhibited. Concealed text is represented by \"...\" ellipses. CONCEALED TOPICs are effectively collapsed within an ANCESTOR. CLOSED: A TOPIC whose immediate OFFSPRING and body-text is CONCEALED. OPEN: A TOPIC that is not CLOSED, though its OFFSPRING or BODY may be. \(fn &optional TOGGLE)" t nil) (defalias 'outlinify-sticky 'outlineify-sticky) (autoload 'outlineify-sticky "allout" "\ Activate outline mode and establish file var so it is started subsequently. See doc-string for `allout-layout' and `allout-init' for details on setup for auto-startup. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (ange-ftp-hook-function ange-ftp-reread-dir) "ange-ftp" ;;;;;; "net/ange-ftp.el" (19259 35393)) ;;; Generated autoloads from net/ange-ftp.el (defalias 'ange-ftp-re-read-dir 'ange-ftp-reread-dir) (autoload 'ange-ftp-reread-dir "ange-ftp" "\ Reread remote directory DIR to update the directory cache. The implementation of remote FTP file names caches directory contents for speed. Therefore, when new remote files are created, Emacs may not know they exist. You can use this command to reread a specific directory, so that Emacs will know its current contents. \(fn &optional DIR)" t nil) (autoload 'ange-ftp-hook-function "ange-ftp" "\ Not documented \(fn OPERATION &rest ARGS)" nil nil) ;;;*** ;;;### (autoloads (animate-birthday-present animate-sequence animate-string) ;;;;;; "animate" "play/animate.el" (19259 35393)) ;;; Generated autoloads from play/animate.el (autoload 'animate-string "animate" "\ Display STRING starting at position VPOS, HPOS, using animation. The characters start at randomly chosen places, and all slide in parallel to their final positions, passing through `animate-n-steps' positions before the final ones. If HPOS is nil (or omitted), center the string horizontally in the current window. \(fn STRING VPOS &optional HPOS)" nil nil) (autoload 'animate-sequence "animate" "\ Display strings from LIST-OF-STRING with animation in a new buffer. Strings will be separated from each other by SPACE lines. \(fn LIST-OF-STRINGS SPACE)" nil nil) (autoload 'animate-birthday-present "animate" "\ Display one's birthday present in a new buffer. You can specify the one's name by NAME; the default value is \"Sarah\". \(fn &optional NAME)" t nil) ;;;*** ;;;### (autoloads (ansi-color-process-output ansi-color-for-comint-mode-on) ;;;;;; "ansi-color" "ansi-color.el" (19259 35393)) ;;; Generated autoloads from ansi-color.el (autoload 'ansi-color-for-comint-mode-on "ansi-color" "\ Set `ansi-color-for-comint-mode' to t. \(fn)" t nil) (autoload 'ansi-color-process-output "ansi-color" "\ Maybe translate SGR control sequences of comint output into text-properties. Depending on variable `ansi-color-for-comint-mode' the comint output is either not processed, SGR control sequences are filtered using `ansi-color-filter-region', or SGR control sequences are translated into text-properties using `ansi-color-apply-on-region'. The comint output is assumed to lie between the marker `comint-last-output-start' and the process-mark. This is a good function to put in `comint-output-filter-functions'. \(fn IGNORED)" nil nil) ;;;*** ;;;### (autoloads (antlr-set-tabs antlr-mode antlr-show-makefile-rules) ;;;;;; "antlr-mode" "progmodes/antlr-mode.el" (19259 35393)) ;;; Generated autoloads from progmodes/antlr-mode.el (autoload 'antlr-show-makefile-rules "antlr-mode" "\ Show Makefile rules for all grammar files in the current directory. If the `major-mode' of the current buffer has the value `makefile-mode', the rules are directory inserted at point. Otherwise, a *Help* buffer is shown with the rules which are also put into the `kill-ring' for \\[yank]. This command considers import/export vocabularies and grammar inheritance and provides a value for the \"-glib\" option if necessary. Customize variable `antlr-makefile-specification' for the appearance of the rules. If the file for a super-grammar cannot be determined, special file names are used according to variable `antlr-unknown-file-formats' and a commentary with value `antlr-help-unknown-file-text' is added. The *Help* buffer always starts with the text in `antlr-help-rules-intro'. \(fn)" t nil) (autoload 'antlr-mode "antlr-mode" "\ Major mode for editing ANTLR grammar files. \\{antlr-mode-map} \(fn)" t nil) (autoload 'antlr-set-tabs "antlr-mode" "\ Use ANTLR's convention for TABs according to `antlr-tab-offset-alist'. Used in `antlr-mode'. Also a useful function in `java-mode-hook'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (appt-activate appt-make-list appt-delete appt-add) ;;;;;; "appt" "calendar/appt.el" (19259 35393)) ;;; Generated autoloads from calendar/appt.el (autoload 'appt-add "appt" "\ Add an appointment for today at NEW-APPT-TIME with message NEW-APPT-MSG. The time should be in either 24 hour format or am/pm format. \(fn NEW-APPT-TIME NEW-APPT-MSG)" t nil) (autoload 'appt-delete "appt" "\ Delete an appointment from the list of appointments. \(fn)" t nil) (autoload 'appt-make-list "appt" "\ Update the appointments list from today's diary buffer. The time must be at the beginning of a line for it to be put in the appointments list (see examples in documentation of the function `appt-check'). We assume that the variables DATE and NUMBER hold the arguments that `diary-list-entries' received. They specify the range of dates that the diary is being processed for. Any appointments made with `appt-add' are not affected by this function. For backwards compatibility, this function activates the appointment package (if it is not already active). \(fn)" nil nil) (autoload 'appt-activate "appt" "\ Toggle checking of appointments. With optional numeric argument ARG, turn appointment checking on if ARG is positive, otherwise off. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (apropos-documentation apropos-value apropos-library ;;;;;; apropos apropos-documentation-property apropos-command apropos-variable ;;;;;; apropos-read-pattern) "apropos" "apropos.el" (19259 35393)) ;;; Generated autoloads from apropos.el (autoload 'apropos-read-pattern "apropos" "\ Read an apropos pattern, either a word list or a regexp. Returns the user pattern, either a list of words which are matched literally, or a string which is used as a regexp to search for. SUBJECT is a string that is included in the prompt to identify what kind of objects to search. \(fn SUBJECT)" nil nil) (autoload 'apropos-variable "apropos" "\ Show user variables that match PATTERN. PATTERN can be a word, a list of words (separated by spaces), or a regexp (using some regexp special characters). If it is a word, search for matches for that word as a substring. If it is a list of words, search for matches for any two (or more) of those words. With \\[universal-argument] prefix, or if `apropos-do-all' is non-nil, also show normal variables. \(fn PATTERN &optional DO-ALL)" t nil) (defalias 'command-apropos 'apropos-command) (autoload 'apropos-command "apropos" "\ Show commands (interactively callable functions) that match PATTERN. PATTERN can be a word, a list of words (separated by spaces), or a regexp (using some regexp special characters). If it is a word, search for matches for that word as a substring. If it is a list of words, search for matches for any two (or more) of those words. With \\[universal-argument] prefix, or if `apropos-do-all' is non-nil, also show noninteractive functions. If VAR-PREDICATE is non-nil, show only variables, and only those that satisfy the predicate VAR-PREDICATE. When called from a Lisp program, a string PATTERN is used as a regexp, while a list of strings is used as a word list. \(fn PATTERN &optional DO-ALL VAR-PREDICATE)" t nil) (autoload 'apropos-documentation-property "apropos" "\ Like (documentation-property SYMBOL PROPERTY RAW) but handle errors. \(fn SYMBOL PROPERTY RAW)" nil nil) (autoload 'apropos "apropos" "\ Show all meaningful Lisp symbols whose names match PATTERN. Symbols are shown if they are defined as functions, variables, or faces, or if they have nonempty property lists. PATTERN can be a word, a list of words (separated by spaces), or a regexp (using some regexp special characters). If it is a word, search for matches for that word as a substring. If it is a list of words, search for matches for any two (or more) of those words. With \\[universal-argument] prefix, or if `apropos-do-all' is non-nil, consider all symbols (if they match PATTERN). Returns list of symbols and documentation found. \(fn PATTERN &optional DO-ALL)" t nil) (autoload 'apropos-library "apropos" "\ List the variables and functions defined by library FILE. FILE should be one of the libraries currently loaded and should thus be found in `load-history'. \(fn FILE)" t nil) (autoload 'apropos-value "apropos" "\ Show all symbols whose value's printed representation matches PATTERN. PATTERN can be a word, a list of words (separated by spaces), or a regexp (using some regexp special characters). If it is a word, search for matches for that word as a substring. If it is a list of words, search for matches for any two (or more) of those words. With \\[universal-argument] prefix, or if `apropos-do-all' is non-nil, also looks at the function and at the names and values of properties. Returns list of symbols and values found. \(fn PATTERN &optional DO-ALL)" t nil) (autoload 'apropos-documentation "apropos" "\ Show symbols whose documentation contains matches for PATTERN. PATTERN can be a word, a list of words (separated by spaces), or a regexp (using some regexp special characters). If it is a word, search for matches for that word as a substring. If it is a list of words, search for matches for any two (or more) of those words. With \\[universal-argument] prefix, or if `apropos-do-all' is non-nil, also use documentation that is not stored in the documentation file and show key bindings. Returns list of symbols and documentation found. \(fn PATTERN &optional DO-ALL)" t nil) ;;;*** ;;;### (autoloads (archive-mode) "arc-mode" "arc-mode.el" (19259 ;;;;;; 35393)) ;;; Generated autoloads from arc-mode.el (autoload 'archive-mode "arc-mode" "\ Major mode for viewing an archive file in a dired-like way. You can move around using the usual cursor motion commands. Letters no longer insert themselves. Type `e' to pull a file out of the archive and into its own buffer; or click mouse-2 on the file's line in the archive mode buffer. If you edit a sub-file of this archive (as with the `e' command) and save it, the contents of that buffer will be saved back into the archive. \\{archive-mode-map} \(fn &optional FORCE)" nil nil) ;;;*** ;;;### (autoloads (array-mode) "array" "array.el" (19259 35393)) ;;; Generated autoloads from array.el (autoload 'array-mode "array" "\ Major mode for editing arrays. Array mode is a specialized mode for editing arrays. An array is considered to be a two-dimensional set of strings. The strings are NOT recognized as integers or real numbers. The array MUST reside at the top of the buffer. TABs are not respected, and may be converted into spaces at any time. Setting the variable `array-respect-tabs' to non-nil will prevent TAB conversion, but will cause many functions to give errors if they encounter one. Upon entering array mode, you will be prompted for the values of several variables. Others will be calculated based on the values you supply. These variables are all local to the buffer. Other buffer in array mode may have different values assigned to the variables. The variables are: Variables you assign: array-max-row: The number of rows in the array. array-max-column: The number of columns in the array. array-columns-per-line: The number of columns in the array per line of buffer. array-field-width: The width of each field, in characters. array-rows-numbered: A logical variable describing whether to ignore row numbers in the buffer. Variables which are calculated: array-line-length: The number of characters in a buffer line. array-lines-per-row: The number of buffer lines used to display each row. The following commands are available (an asterisk indicates it may take a numeric prefix argument): * \\<array-mode-map>\\[array-forward-column] Move forward one column. * \\[array-backward-column] Move backward one column. * \\[array-next-row] Move down one row. * \\[array-previous-row] Move up one row. * \\[array-copy-forward] Copy the current field into the column to the right. * \\[array-copy-backward] Copy the current field into the column to the left. * \\[array-copy-down] Copy the current field into the row below. * \\[array-copy-up] Copy the current field into the row above. * \\[array-copy-column-forward] Copy the current column into the column to the right. * \\[array-copy-column-backward] Copy the current column into the column to the left. * \\[array-copy-row-down] Copy the current row into the row below. * \\[array-copy-row-up] Copy the current row into the row above. \\[array-fill-rectangle] Copy the field at mark into every cell with row and column between that of point and mark. \\[array-what-position] Display the current array row and column. \\[array-goto-cell] Go to a particular array cell. \\[array-make-template] Make a template for a new array. \\[array-reconfigure-rows] Reconfigure the array. \\[array-expand-rows] Expand the array (remove row numbers and newlines inside rows) \\[array-display-local-variables] Display the current values of local variables. Entering array mode calls the function `array-mode-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (artist-mode) "artist" "textmodes/artist.el" (19259 ;;;;;; 35393)) ;;; Generated autoloads from textmodes/artist.el (autoload 'artist-mode "artist" "\ Toggle Artist mode. With argument STATE, turn Artist mode on if STATE is positive. Artist lets you draw lines, squares, rectangles and poly-lines, ellipses and circles with your mouse and/or keyboard. How to quit Artist mode Type \\[artist-mode-off] to quit artist-mode. How to submit a bug report Type \\[artist-submit-bug-report] to submit a bug report. Drawing with the mouse: mouse-2 shift mouse-2 Pops up a menu where you can select what to draw with mouse-1, and where you can do some settings (described below). mouse-1 shift mouse-1 Draws lines, rectangles or poly-lines, erases, cuts, copies or pastes: Operation Not shifted Shifted -------------------------------------------------------------- Pen fill-char at point line from last point to new point -------------------------------------------------------------- Line Line in any direction Straight line -------------------------------------------------------------- Rectangle Rectangle Square -------------------------------------------------------------- Poly-line Poly-line in any dir Straight poly-lines -------------------------------------------------------------- Ellipses Ellipses Circles -------------------------------------------------------------- Text Text (see thru) Text (overwrite) -------------------------------------------------------------- Spray-can Spray-can Set size for spray -------------------------------------------------------------- Erase Erase character Erase rectangle -------------------------------------------------------------- Vaporize Erase single line Erase connected lines -------------------------------------------------------------- Cut Cut rectangle Cut square -------------------------------------------------------------- Copy Copy rectangle Copy square -------------------------------------------------------------- Paste Paste Paste -------------------------------------------------------------- Flood-fill Flood-fill Flood-fill -------------------------------------------------------------- * Straight lines can only go horizontally, vertically or diagonally. * Poly-lines are drawn while holding mouse-1 down. When you release the button, the point is set. If you want a segment to be straight, hold down shift before pressing the mouse-1 button. Click mouse-2 or mouse-3 to stop drawing poly-lines. * See thru for text means that text already in the buffer will be visible through blanks in the text rendered, while overwrite means the opposite. * Vaporizing connected lines only vaporizes lines whose _endpoints_ are connected. See also the variable `artist-vaporize-fuzziness'. * Cut copies, then clears the rectangle/square. * When drawing lines or poly-lines, you can set arrows. See below under ``Arrows'' for more info. * The mode line shows the currently selected drawing operation. In addition, if it has an asterisk (*) at the end, you are currently drawing something. * Be patient when flood-filling -- large areas take quite some time to fill. mouse-3 Erases character under pointer shift mouse-3 Erases rectangle Settings Set fill Sets the character used when filling rectangles/squares Set line Sets the character used when drawing lines Erase char Sets the character used when erasing Rubber-banding Toggles rubber-banding Trimming Toggles trimming of line-endings (that is: when the shape is drawn, extraneous white-space at end of lines is removed) Borders Toggles the drawing of line borders around filled shapes Drawing with keys \\[artist-key-set-point] Does one of the following: For lines/rectangles/squares: sets the first/second endpoint For poly-lines: sets a point (use C-u \\[artist-key-set-point] to set last point) When erase characters: toggles erasing When cutting/copying: Sets first/last endpoint of rect/square When pasting: Pastes \\[artist-select-operation] Selects what to draw Move around with \\[artist-next-line], \\[artist-previous-line], \\[artist-forward-char] and \\[artist-backward-char]. \\[artist-select-fill-char] Sets the character to use when filling \\[artist-select-line-char] Sets the character to use when drawing \\[artist-select-erase-char] Sets the character to use when erasing \\[artist-toggle-rubber-banding] Toggles rubber-banding \\[artist-toggle-trim-line-endings] Toggles trimming of line-endings \\[artist-toggle-borderless-shapes] Toggles borders on drawn shapes Arrows \\[artist-toggle-first-arrow] Sets/unsets an arrow at the beginning of the line/poly-line \\[artist-toggle-second-arrow] Sets/unsets an arrow at the end of the line/poly-line Selecting operation There are some keys for quickly selecting drawing operations: \\[artist-select-op-line] Selects drawing lines \\[artist-select-op-straight-line] Selects drawing straight lines \\[artist-select-op-rectangle] Selects drawing rectangles \\[artist-select-op-square] Selects drawing squares \\[artist-select-op-poly-line] Selects drawing poly-lines \\[artist-select-op-straight-poly-line] Selects drawing straight poly-lines \\[artist-select-op-ellipse] Selects drawing ellipses \\[artist-select-op-circle] Selects drawing circles \\[artist-select-op-text-see-thru] Selects rendering text (see thru) \\[artist-select-op-text-overwrite] Selects rendering text (overwrite) \\[artist-select-op-spray-can] Spray with spray-can \\[artist-select-op-spray-set-size] Set size for the spray-can \\[artist-select-op-erase-char] Selects erasing characters \\[artist-select-op-erase-rectangle] Selects erasing rectangles \\[artist-select-op-vaporize-line] Selects vaporizing single lines \\[artist-select-op-vaporize-lines] Selects vaporizing connected lines \\[artist-select-op-cut-rectangle] Selects cutting rectangles \\[artist-select-op-copy-rectangle] Selects copying rectangles \\[artist-select-op-paste] Selects pasting \\[artist-select-op-flood-fill] Selects flood-filling Variables This is a brief overview of the different varaibles. For more info, see the documentation for the variables (type \\[describe-variable] <variable> RET). artist-rubber-banding Interactively do rubber-banding or not artist-first-char What to set at first/second point... artist-second-char ...when not rubber-banding artist-interface-with-rect If cut/copy/paste should interface with rect artist-arrows The arrows to use when drawing arrows artist-aspect-ratio Character height-to-width for squares artist-trim-line-endings Trimming of line endings artist-flood-fill-right-border Right border when flood-filling artist-flood-fill-show-incrementally Update display while filling artist-pointer-shape Pointer shape to use while drawing artist-ellipse-left-char Character to use for narrow ellipses artist-ellipse-right-char Character to use for narrow ellipses artist-borderless-shapes If shapes should have borders artist-picture-compatibility Whether or not to be picture mode compatible artist-vaporize-fuzziness Tolerance when recognizing lines artist-spray-interval Seconds between repeated sprayings artist-spray-radius Size of the spray-area artist-spray-chars The spray-``color'' artist-spray-new-chars Initial spray-``color'' Hooks When entering artist-mode, the hook `artist-mode-init-hook' is called. When quitting artist-mode, the hook `artist-mode-exit-hook' is called. Keymap summary \\{artist-mode-map} \(fn &optional STATE)" t nil) ;;;*** ;;;### (autoloads (asm-mode) "asm-mode" "progmodes/asm-mode.el" (19259 ;;;;;; 35393)) ;;; Generated autoloads from progmodes/asm-mode.el (autoload 'asm-mode "asm-mode" "\ Major mode for editing typical assembler code. Features a private abbrev table and the following bindings: \\[asm-colon] outdent a preceding label, tab to next tab stop. \\[tab-to-tab-stop] tab to next tab stop. \\[asm-newline] newline, then tab to next tab stop. \\[asm-comment] smart placement of assembler comments. The character used for making comments is set by the variable `asm-comment-char' (which defaults to `?\\;'). Alternatively, you may set this variable in `asm-mode-set-comment-hook', which is called near the beginning of mode initialization. Turning on Asm mode runs the hook `asm-mode-hook' at the end of initialization. Special commands: \\{asm-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (autoarg-kp-mode autoarg-mode) "autoarg" "autoarg.el" ;;;;;; (19259 35394)) ;;; Generated autoloads from autoarg.el (defvar autoarg-mode nil "\ Non-nil if Autoarg mode is enabled. See the command `autoarg-mode' for a description of this minor mode.") (custom-autoload 'autoarg-mode "autoarg" nil) (autoload 'autoarg-mode "autoarg" "\ Toggle Autoarg minor mode globally. With ARG, turn Autoarg mode on if ARG is positive, off otherwise. \\<autoarg-mode-map> In Autoarg mode digits are bound to `digit-argument' -- i.e. they supply prefix arguments as C-DIGIT and M-DIGIT normally do -- and C-DIGIT inserts DIGIT. \\[autoarg-terminate] terminates the prefix sequence and inserts the digits of the autoarg sequence into the buffer. Without a numeric prefix arg the normal binding of \\[autoarg-terminate] is invoked, i.e. what it would be with Autoarg mode off. For example: `6 9 \\[autoarg-terminate]' inserts `69' into the buffer, as does `C-6 C-9'. `6 9 a' inserts 69 `a's into the buffer. `6 9 \\[autoarg-terminate] \\[autoarg-terminate]' inserts `69' into the buffer and then invokes the normal binding of \\[autoarg-terminate]. `C-u \\[autoarg-terminate]' invokes the normal binding of \\[autoarg-terminate] four times. \\{autoarg-mode-map} \(fn &optional ARG)" t nil) (defvar autoarg-kp-mode nil "\ Non-nil if Autoarg-Kp mode is enabled. See the command `autoarg-kp-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `autoarg-kp-mode'.") (custom-autoload 'autoarg-kp-mode "autoarg" nil) (autoload 'autoarg-kp-mode "autoarg" "\ Toggle Autoarg-KP minor mode globally. With ARG, turn Autoarg mode on if ARG is positive, off otherwise. \\<autoarg-kp-mode-map> This is similar to \\[autoarg-mode] but rebinds the keypad keys `kp-1' etc. to supply digit arguments. \\{autoarg-kp-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (autoconf-mode) "autoconf" "progmodes/autoconf.el" ;;;;;; (19259 35394)) ;;; Generated autoloads from progmodes/autoconf.el (autoload 'autoconf-mode "autoconf" "\ Major mode for editing Autoconf configure.in files. \(fn)" t nil) ;;;*** ;;;### (autoloads (auto-insert-mode define-auto-insert auto-insert) ;;;;;; "autoinsert" "autoinsert.el" (19259 35394)) ;;; Generated autoloads from autoinsert.el (autoload 'auto-insert "autoinsert" "\ Insert default contents into new files if variable `auto-insert' is non-nil. Matches the visited file name against the elements of `auto-insert-alist'. \(fn)" t nil) (autoload 'define-auto-insert "autoinsert" "\ Associate CONDITION with (additional) ACTION in `auto-insert-alist'. Optional AFTER means to insert action after all existing actions for CONDITION, or if CONDITION had no actions, after all other CONDITIONs. \(fn CONDITION ACTION &optional AFTER)" nil nil) (defvar auto-insert-mode nil "\ Non-nil if Auto-Insert mode is enabled. See the command `auto-insert-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `auto-insert-mode'.") (custom-autoload 'auto-insert-mode "autoinsert" nil) (autoload 'auto-insert-mode "autoinsert" "\ Toggle Auto-insert mode. With prefix ARG, turn Auto-insert mode on if and only if ARG is positive. Returns the new status of Auto-insert mode (non-nil means on). When Auto-insert mode is enabled, when new files are created you can insert a template for the file depending on the mode of the buffer. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (batch-update-autoloads update-directory-autoloads ;;;;;; update-file-autoloads) "autoload" "emacs-lisp/autoload.el" ;;;;;; (19259 35394)) ;;; Generated autoloads from emacs-lisp/autoload.el (put 'generated-autoload-file 'safe-local-variable 'stringp) (put 'generated-autoload-load-name 'safe-local-variable 'stringp) (autoload 'update-file-autoloads "autoload" "\ Update the autoloads for FILE in `generated-autoload-file' \(which FILE might bind in its local variables). If SAVE-AFTER is non-nil (which is always, when called interactively), save the buffer too. Return FILE if there was no autoload cookie in it, else nil. \(fn FILE &optional SAVE-AFTER)" t nil) (autoload 'update-directory-autoloads "autoload" "\ Update loaddefs.el with all the current autoloads from DIRS, and no old ones. This uses `update-file-autoloads' (which see) to do its work. In an interactive call, you must give one argument, the name of a single directory. In a call from Lisp, you can supply multiple directories as separate arguments, but this usage is discouraged. The function does NOT recursively descend into subdirectories of the directory or directories specified. \(fn &rest DIRS)" t nil) (autoload 'batch-update-autoloads "autoload" "\ Update loaddefs.el autoloads in batch mode. Calls `update-directory-autoloads' on the command line arguments. \(fn)" nil nil) ;;;*** ;;;### (autoloads (global-auto-revert-mode turn-on-auto-revert-tail-mode ;;;;;; auto-revert-tail-mode turn-on-auto-revert-mode auto-revert-mode) ;;;;;; "autorevert" "autorevert.el" (19259 35394)) ;;; Generated autoloads from autorevert.el (autoload 'auto-revert-mode "autorevert" "\ Toggle reverting buffer when file on disk changes. With arg, turn Auto Revert mode on if and only if arg is positive. This is a minor mode that affects only the current buffer. Use `global-auto-revert-mode' to automatically revert all buffers. Use `auto-revert-tail-mode' if you know that the file will only grow without being changed in the part that is already in the buffer. \(fn &optional ARG)" t nil) (autoload 'turn-on-auto-revert-mode "autorevert" "\ Turn on Auto-Revert Mode. This function is designed to be added to hooks, for example: (add-hook 'c-mode-hook 'turn-on-auto-revert-mode) \(fn)" nil nil) (autoload 'auto-revert-tail-mode "autorevert" "\ Toggle reverting tail of buffer when file on disk grows. With arg, turn Tail mode on if arg is positive, otherwise turn it off. When Tail mode is enabled, the tail of the file is constantly followed, as with the shell command `tail -f'. This means that whenever the file grows on disk (presumably because some background process is appending to it from time to time), this is reflected in the current buffer. You can edit the buffer and turn this mode off and on again as you please. But make sure the background process has stopped writing before you save the file! Use `auto-revert-mode' for changes other than appends! \(fn &optional ARG)" t nil) (autoload 'turn-on-auto-revert-tail-mode "autorevert" "\ Turn on Auto-Revert Tail Mode. This function is designed to be added to hooks, for example: (add-hook 'my-logfile-mode-hook 'turn-on-auto-revert-tail-mode) \(fn)" nil nil) (defvar global-auto-revert-mode nil "\ Non-nil if Global-Auto-Revert mode is enabled. See the command `global-auto-revert-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-auto-revert-mode'.") (custom-autoload 'global-auto-revert-mode "autorevert" nil) (autoload 'global-auto-revert-mode "autorevert" "\ Toggle Global Auto Revert mode. With optional prefix argument ARG, enable Global Auto Revert Mode if ARG > 0, else disable it. This is a global minor mode that reverts any buffer associated with a file when the file changes on disk. Use `auto-revert-mode' to revert a particular buffer. If `global-auto-revert-non-file-buffers' is non-nil, this mode may also revert some non-file buffers, as described in the documentation of that variable. It ignores buffers with modes matching `global-auto-revert-ignore-modes', and buffers with a non-nil vale of `global-auto-revert-ignore-buffer'. This function calls the hook `global-auto-revert-mode-hook'. It displays the text that `global-auto-revert-mode-text' specifies in the mode line. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (mouse-avoidance-mode mouse-avoidance-mode) "avoid" ;;;;;; "avoid.el" (19259 35394)) ;;; Generated autoloads from avoid.el (defvar mouse-avoidance-mode nil "\ Activate mouse avoidance mode. See function `mouse-avoidance-mode' for possible values. Setting this variable directly does not take effect; use either \\[customize] or the function `mouse-avoidance-mode'.") (custom-autoload 'mouse-avoidance-mode "avoid" nil) (autoload 'mouse-avoidance-mode "avoid" "\ Set cursor avoidance mode to MODE. MODE should be one of the symbols `banish', `exile', `jump', `animate', `cat-and-mouse', `proteus', or `none'. If MODE is nil, toggle mouse avoidance between `none' and `banish' modes. Positive numbers and symbols other than the above are treated as equivalent to `banish'; negative numbers and `-' are equivalent to `none'. Effects of the different modes: * banish: Move the mouse to the upper-right corner on any keypress. * exile: Move the mouse to the corner only if the cursor gets too close, and allow it to return once the cursor is out of the way. * jump: If the cursor gets too close to the mouse, displace the mouse a random distance & direction. * animate: As `jump', but shows steps along the way for illusion of motion. * cat-and-mouse: Same as `animate'. * proteus: As `animate', but changes the shape of the mouse pointer too. Whenever the mouse is moved, the frame is also raised. \(see `mouse-avoidance-threshold' for definition of \"too close\", and `mouse-avoidance-nudge-dist' and `mouse-avoidance-nudge-var' for definition of \"random distance\".) \(fn &optional MODE)" t nil) ;;;*** ;;;### (autoloads (display-battery-mode battery) "battery" "battery.el" ;;;;;; (19259 35394)) ;;; Generated autoloads from battery.el (put 'battery-mode-line-string 'risky-local-variable t) (autoload 'battery "battery" "\ Display battery status information in the echo area. The text being displayed in the echo area is controlled by the variables `battery-echo-area-format' and `battery-status-function'. \(fn)" t nil) (defvar display-battery-mode nil "\ Non-nil if Display-Battery mode is enabled. See the command `display-battery-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `display-battery-mode'.") (custom-autoload 'display-battery-mode "battery" nil) (autoload 'display-battery-mode "battery" "\ Display battery status information in the mode line. The text being displayed in the mode line is controlled by the variables `battery-mode-line-format' and `battery-status-function'. The mode line will be updated automatically every `battery-update-interval' seconds. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (benchmark benchmark-run-compiled benchmark-run) ;;;;;; "benchmark" "emacs-lisp/benchmark.el" (19259 35394)) ;;; Generated autoloads from emacs-lisp/benchmark.el (autoload 'benchmark-run "benchmark" "\ Time execution of FORMS. If REPETITIONS is supplied as a number, run forms that many times, accounting for the overhead of the resulting loop. Otherwise run FORMS once. Return a list of the total elapsed time for execution, the number of garbage collections that ran, and the time taken by garbage collection. See also `benchmark-run-compiled'. \(fn &optional REPETITIONS &rest FORMS)" nil (quote macro)) (autoload 'benchmark-run-compiled "benchmark" "\ Time execution of compiled version of FORMS. This is like `benchmark-run', but what is timed is a funcall of the byte code obtained by wrapping FORMS in a `lambda' and compiling the result. The overhead of the `lambda's is accounted for. \(fn &optional REPETITIONS &rest FORMS)" nil (quote macro)) (autoload 'benchmark "benchmark" "\ Print the time taken for REPETITIONS executions of FORM. Interactively, REPETITIONS is taken from the prefix arg. For non-interactive use see also `benchmark-run' and `benchmark-run-compiled'. \(fn REPETITIONS FORM)" t nil) ;;;*** ;;;### (autoloads (bibtex-search-entry bibtex-mode bibtex-initialize) ;;;;;; "bibtex" "textmodes/bibtex.el" (19259 35394)) ;;; Generated autoloads from textmodes/bibtex.el (autoload 'bibtex-initialize "bibtex" "\ (Re)Initialize BibTeX buffers. Visit the BibTeX files defined by `bibtex-files' and return a list of corresponding buffers. Initialize in these buffers `bibtex-reference-keys' if not yet set. List of BibTeX buffers includes current buffer if CURRENT is non-nil. If FORCE is non-nil, (re)initialize `bibtex-reference-keys' even if already set. If SELECT is non-nil interactively select a BibTeX buffer. When called interactively, FORCE is t, CURRENT is t if current buffer uses `bibtex-mode', and SELECT is t if current buffer does not use `bibtex-mode', \(fn &optional CURRENT FORCE SELECT)" t nil) (autoload 'bibtex-mode "bibtex" "\ Major mode for editing BibTeX files. General information on working with BibTeX mode: Use commands such as \\<bibtex-mode-map>\\[bibtex-Book] to get a template for a specific entry. Then fill in all desired fields using \\[bibtex-next-field] to jump from field to field. After having filled in all desired fields in the entry, clean the new entry with the command \\[bibtex-clean-entry]. Some features of BibTeX mode are available only by setting the variable `bibtex-maintain-sorted-entries' to non-nil. However, then BibTeX mode works only with buffers containing valid (syntactical correct) and sorted entries. This is usually the case, if you have created a buffer completely with BibTeX mode and finished every new entry with \\[bibtex-clean-entry]. For third party BibTeX files, call the command \\[bibtex-convert-alien] to fully take advantage of all features of BibTeX mode. Special information: A command such as \\[bibtex-Book] outlines the fields for a BibTeX book entry. The names of optional fields start with the string OPT, and are thus ignored by BibTeX. The names of alternative fields from which only one is required start with the string ALT. The OPT or ALT string may be removed from the name of a field with \\[bibtex-remove-OPT-or-ALT]. \\[bibtex-make-field] inserts a new field after the current one. \\[bibtex-kill-field] kills the current field entirely. \\[bibtex-yank] yanks the last recently killed field after the current field. \\[bibtex-remove-delimiters] removes the double-quotes or braces around the text of the current field. \\[bibtex-empty-field] replaces the text of the current field with the default \"\" or {}. \\[bibtex-find-text] moves point to the end of the current field. \\[bibtex-complete] completes word fragment before point according to context. The command \\[bibtex-clean-entry] cleans the current entry, i.e. it removes OPT/ALT from the names of all non-empty optional or alternative fields, checks that no required fields are empty, and does some formatting dependent on the value of `bibtex-entry-format'. Furthermore, it can automatically generate a key for the BibTeX entry, see `bibtex-generate-autokey'. Note: some functions in BibTeX mode depend on entries being in a special format (all fields beginning on separate lines), so it is usually a bad idea to remove `realign' from `bibtex-entry-format'. BibTeX mode supports Imenu and hideshow minor mode (`hs-minor-mode'). ---------------------------------------------------------- Entry to BibTeX mode calls the value of `bibtex-mode-hook' if that value is non-nil. \\{bibtex-mode-map} \(fn)" t nil) (autoload 'bibtex-search-entry "bibtex" "\ Move point to the beginning of BibTeX entry named KEY. Return position of entry if KEY is found or nil if not found. With GLOBAL non-nil, search KEY in `bibtex-files'. Otherwise the search is limited to the current buffer. Optional arg START is buffer position where the search starts. If it is nil, start search at beginning of buffer. If DISPLAY is non-nil, display the buffer containing KEY. Otherwise, use `set-buffer'. When called interactively, GLOBAL is t if there is a prefix arg or the current mode is not `bibtex-mode', START is nil, and DISPLAY is t. \(fn KEY &optional GLOBAL START DISPLAY)" t nil) ;;;*** ;;;### (autoloads (bibtex-style-mode) "bibtex-style" "textmodes/bibtex-style.el" ;;;;;; (19259 35394)) ;;; Generated autoloads from textmodes/bibtex-style.el (add-to-list 'auto-mode-alist (cons (purecopy "\\.bst\\'") 'bibtex-style-mode)) (autoload 'bibtex-style-mode "bibtex-style" "\ Major mode for editing BibTeX style files. \(fn)" t nil) ;;;*** ;;;### (autoloads (binhex-decode-region binhex-decode-region-external ;;;;;; binhex-decode-region-internal) "binhex" "mail/binhex.el" ;;;;;; (19259 35394)) ;;; Generated autoloads from mail/binhex.el (defconst binhex-begin-line "^:...............................................................$") (autoload 'binhex-decode-region-internal "binhex" "\ Binhex decode region between START and END without using an external program. If HEADER-ONLY is non-nil only decode header and return filename. \(fn START END &optional HEADER-ONLY)" t nil) (autoload 'binhex-decode-region-external "binhex" "\ Binhex decode region between START and END using external decoder. \(fn START END)" t nil) (autoload 'binhex-decode-region "binhex" "\ Binhex decode region between START and END. \(fn START END)" t nil) ;;;*** ;;;### (autoloads (blackbox) "blackbox" "play/blackbox.el" (19259 ;;;;;; 35394)) ;;; Generated autoloads from play/blackbox.el (autoload 'blackbox "blackbox" "\ Play blackbox. Optional prefix argument is the number of balls; the default is 4. What is blackbox? Blackbox is a game of hide and seek played on an 8 by 8 grid (the Blackbox). Your opponent (Emacs, in this case) has hidden several balls (usually 4) within this box. By shooting rays into the box and observing where they emerge it is possible to deduce the positions of the hidden balls. The fewer rays you use to find the balls, the lower your score. Overview of play: \\<blackbox-mode-map>To play blackbox, type \\[blackbox]. An optional prefix argument specifies the number of balls to be hidden in the box; the default is four. The cursor can be moved around the box with the standard cursor movement keys. To shoot a ray, move the cursor to the edge of the box and press SPC. The result will be determined and the playfield updated. You may place or remove balls in the box by moving the cursor into the box and pressing \\[bb-romp]. When you think the configuration of balls you have placed is correct, press \\[bb-done]. You will be informed whether you are correct or not, and be given your score. Your score is the number of letters and numbers around the outside of the box plus five for each incorrectly placed ball. If you placed any balls incorrectly, they will be indicated with `x', and their actual positions indicated with `o'. Details: There are three possible outcomes for each ray you send into the box: Detour: the ray is deflected and emerges somewhere other than where you sent it in. On the playfield, detours are denoted by matching pairs of numbers -- one where the ray went in, and the other where it came out. Reflection: the ray is reflected and emerges in the same place it was sent in. On the playfield, reflections are denoted by the letter `R'. Hit: the ray strikes a ball directly and is absorbed. It does not emerge from the box. On the playfield, hits are denoted by the letter `H'. The rules for how balls deflect rays are simple and are best shown by example. As a ray approaches a ball it is deflected ninety degrees. Rays can be deflected multiple times. In the diagrams below, the dashes represent empty box locations and the letter `O' represents a ball. The entrance and exit points of each ray are marked with numbers as described under \"Detour\" above. Note that the entrance and exit points are always interchangeable. `*' denotes the path taken by the ray. Note carefully the relative positions of the ball and the ninety degree deflection it causes. 1 - * - - - - - - - - - - - - - - - - - - - - - - - * - - - - - - - - - - - - - - - - - - - - - - 1 * * - - - - - - - - - - - - - - - O - - - - O - - - O - - - - - - - O - - - - - - - * * * * - - - - - - - - - - - - - * * * * * 2 3 * * * - - * - - - - - - - - - - - - - * - - - - - - - O - * - - - - - - - - - - - - - * - - - - - - - - * * - - - - - - - - - - - - - * - - - - - - - - * - O - 2 3 As mentioned above, a reflection occurs when a ray emerges from the same point it was sent in. This can happen in several ways: - - - - - - - - - - - - - - - - - - - - - - - - - - - - O - - - - - O - O - - - - - - - - - - - R * * * * - - - - - - - * - - - - O - - - - - - - - - - - O - - - - - - * - - - - R - - - - - - - - - - - - - - - - - - - * - - - - - - - - - - - - - - - - - - - - - - - * - - - - - - - - - - - - - - - - - - - - R * * * * - - - - - - - - - - - - - - - - - - - - - - - - O - - - - - - - - - - - In the first example, the ray is deflected downwards by the upper ball, then left by the lower ball, and finally retraces its path to its point of origin. The second example is similar. The third example is a bit anomalous but can be rationalized by realizing the ray never gets a chance to get into the box. Alternatively, the ray can be thought of as being deflected downwards and immediately emerging from the box. A hit occurs when a ray runs straight into a ball: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - O - - - - - - - - - - - - - - - O - - - H * * * * - - - - - - - - - - - - H * * * * O - - - - - - * - - - - - - - - - - - - - - - - O - - - - - - O - - - - H * * * O - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Be sure to compare the second example of a hit with the first example of a reflection. \(fn NUM)" t nil) ;;;*** ;;;### (autoloads (bookmark-bmenu-search bookmark-bmenu-list bookmark-load ;;;;;; bookmark-save bookmark-write bookmark-delete bookmark-insert ;;;;;; bookmark-rename bookmark-insert-location bookmark-relocate ;;;;;; bookmark-jump-other-window bookmark-jump bookmark-set) "bookmark" ;;;;;; "bookmark.el" (19259 35395)) ;;; Generated autoloads from bookmark.el (define-key ctl-x-r-map "b" 'bookmark-jump) (define-key ctl-x-r-map "m" 'bookmark-set) (define-key ctl-x-r-map "l" 'bookmark-bmenu-list) (defvar bookmark-map (let ((map (make-sparse-keymap))) (define-key map "x" 'bookmark-set) (define-key map "m" 'bookmark-set) (define-key map "j" 'bookmark-jump) (define-key map "g" 'bookmark-jump) (define-key map "o" 'bookmark-jump-other-window) (define-key map "i" 'bookmark-insert) (define-key map "e" 'edit-bookmarks) (define-key map "f" 'bookmark-insert-location) (define-key map "r" 'bookmark-rename) (define-key map "d" 'bookmark-delete) (define-key map "l" 'bookmark-load) (define-key map "w" 'bookmark-write) (define-key map "s" 'bookmark-save) map) "\ Keymap containing bindings to bookmark functions. It is not bound to any key by default: to bind it so that you have a bookmark prefix, just use `global-set-key' and bind a key of your choice to `bookmark-map'. All interactive bookmark functions have a binding in this keymap.") (fset 'bookmark-map bookmark-map) (autoload 'bookmark-set "bookmark" "\ Set a bookmark named NAME at the current location. If name is nil, then prompt the user. With a prefix arg (non-nil NO-OVERWRITE), do not overwrite any existing bookmark that has the same name as NAME, but instead push the new bookmark onto the bookmark alist. The most recently set bookmark with name NAME is thus the one in effect at any given time, but the others are still there, should the user decide to delete the most recent one. To yank words from the text of the buffer and use them as part of the bookmark name, type C-w while setting a bookmark. Successive C-w's yank successive words. Typing C-u inserts (at the bookmark name prompt) the name of the last bookmark used in the document where the new bookmark is being set; this helps you use a single bookmark name to track progress through a large document. If there is no prior bookmark for this document, then C-u inserts an appropriate name based on the buffer or file. Use \\[bookmark-delete] to remove bookmarks (you give it a name and it removes only the first instance of a bookmark with that name from the list of bookmarks.) \(fn &optional NAME NO-OVERWRITE)" t nil) (autoload 'bookmark-jump "bookmark" "\ Jump to bookmark BOOKMARK (a point in some file). You may have a problem using this function if the value of variable `bookmark-alist' is nil. If that happens, you need to load in some bookmarks. See help on function `bookmark-load' for more about this. If the file pointed to by BOOKMARK no longer exists, you will be asked if you wish to give the bookmark a new location, and `bookmark-jump' will then jump to the new location, as well as recording it in place of the old one in the permanent bookmark record. BOOKMARK may be a bookmark name (a string) or a bookmark record, but the latter is usually only used by programmatic callers. If DISPLAY-FUNC is non-nil, it is a function to invoke to display the bookmark. It defaults to `switch-to-buffer'. A typical value for DISPLAY-FUNC would be `switch-to-buffer-other-window'. \(fn BOOKMARK &optional DISPLAY-FUNC)" t nil) (autoload 'bookmark-jump-other-window "bookmark" "\ Jump to BOOKMARK in another window. See `bookmark-jump' for more. \(fn BOOKMARK)" t nil) (autoload 'bookmark-relocate "bookmark" "\ Relocate BOOKMARK to another file (reading file name with minibuffer). BOOKMARK is a bookmark name (a string), not a bookmark record. This makes an already existing bookmark point to that file, instead of the one it used to point at. Useful when a file has been renamed after a bookmark was set in it. \(fn BOOKMARK)" t nil) (autoload 'bookmark-insert-location "bookmark" "\ Insert the name of the file associated with BOOKMARK. BOOKMARK is a bookmark name (a string), not a bookmark record. Optional second arg NO-HISTORY means don't record this in the minibuffer history list `bookmark-history'. \(fn BOOKMARK &optional NO-HISTORY)" t nil) (defalias 'bookmark-locate 'bookmark-insert-location) (autoload 'bookmark-rename "bookmark" "\ Change the name of OLD bookmark to NEW name. If called from keyboard, prompt for OLD and NEW. If called from menubar, select OLD from a menu and prompt for NEW. Both OLD and NEW are bookmark names (strings), never bookmark records. If called from Lisp, prompt for NEW if only OLD was passed as an argument. If called with two strings, then no prompting is done. You must pass at least OLD when calling from Lisp. While you are entering the new name, consecutive C-w's insert consecutive words from the text of the buffer into the new bookmark name. \(fn OLD &optional NEW)" t nil) (autoload 'bookmark-insert "bookmark" "\ Insert the text of the file pointed to by bookmark BOOKMARK. BOOKMARK is a bookmark name (a string), not a bookmark record. You may have a problem using this function if the value of variable `bookmark-alist' is nil. If that happens, you need to load in some bookmarks. See help on function `bookmark-load' for more about this. \(fn BOOKMARK)" t nil) (autoload 'bookmark-delete "bookmark" "\ Delete BOOKMARK from the bookmark list. BOOKMARK is a bookmark name (a string), not a bookmark record. Removes only the first instance of a bookmark with that name. If there are one or more other bookmarks with the same name, they will not be deleted. Defaults to the \"current\" bookmark (that is, the one most recently used in this file, if any). Optional second arg BATCH means don't update the bookmark list buffer, probably because we were called from there. \(fn BOOKMARK &optional BATCH)" t nil) (autoload 'bookmark-write "bookmark" "\ Write bookmarks to a file (reading the file name with the minibuffer). Don't use this in Lisp programs; use `bookmark-save' instead. \(fn)" t nil) (autoload 'bookmark-save "bookmark" "\ Save currently defined bookmarks. Saves by default in the file defined by the variable `bookmark-default-file'. With a prefix arg, save it in file FILE \(second argument). If you are calling this from Lisp, the two arguments are PARG and FILE, and if you just want it to write to the default file, then pass no arguments. Or pass in nil and FILE, and it will save in FILE instead. If you pass in one argument, and it is non-nil, then the user will be interactively queried for a file to save in. When you want to load in the bookmarks from a file, use `bookmark-load', \\[bookmark-load]. That function will prompt you for a file, defaulting to the file defined by variable `bookmark-default-file'. \(fn &optional PARG FILE)" t nil) (autoload 'bookmark-load "bookmark" "\ Load bookmarks from FILE (which must be in bookmark format). Appends loaded bookmarks to the front of the list of bookmarks. If optional second argument OVERWRITE is non-nil, existing bookmarks are destroyed. Optional third arg NO-MSG means don't display any messages while loading. If you load a file that doesn't contain a proper bookmark alist, you will corrupt Emacs's bookmark list. Generally, you should only load in files that were created with the bookmark functions in the first place. Your own personal bookmark file, `~/.emacs.bmk', is maintained automatically by Emacs; you shouldn't need to load it explicitly. If you load a file containing bookmarks with the same names as bookmarks already present in your Emacs, the new bookmarks will get unique numeric suffixes \"<2>\", \"<3>\", ... following the same method buffers use to resolve name collisions. \(fn FILE &optional OVERWRITE NO-MSG)" t nil) (autoload 'bookmark-bmenu-list "bookmark" "\ Display a list of existing bookmarks. The list is displayed in a buffer named `*Bookmark List*'. The leftmost column displays a D if the bookmark is flagged for deletion, or > if it is flagged for displaying. \(fn)" t nil) (defalias 'list-bookmarks 'bookmark-bmenu-list) (defalias 'edit-bookmarks 'bookmark-bmenu-list) (autoload 'bookmark-bmenu-search "bookmark" "\ Incremental search of bookmarks, hiding the non-matches as we go. \(fn)" t nil) (defvar menu-bar-bookmark-map (let ((map (make-sparse-keymap "Bookmark functions"))) (define-key map [load] `(menu-item ,(purecopy "Load a Bookmark File...") bookmark-load :help ,(purecopy "Load bookmarks from a bookmark file)"))) (define-key map [write] `(menu-item ,(purecopy "Save Bookmarks As...") bookmark-write :help ,(purecopy "Write bookmarks to a file (reading the file name with the minibuffer)"))) (define-key map [save] `(menu-item ,(purecopy "Save Bookmarks") bookmark-save :help ,(purecopy "Save currently defined bookmarks"))) (define-key map [edit] `(menu-item ,(purecopy "Edit Bookmark List") bookmark-bmenu-list :help ,(purecopy "Display a list of existing bookmarks"))) (define-key map [delete] `(menu-item ,(purecopy "Delete Bookmark...") bookmark-delete :help ,(purecopy "Delete a bookmark from the bookmark list"))) (define-key map [rename] `(menu-item ,(purecopy "Rename Bookmark...") bookmark-rename :help ,(purecopy "Change the name of a bookmark"))) (define-key map [locate] `(menu-item ,(purecopy "Insert Location...") bookmark-locate :help ,(purecopy "Insert the name of the file associated with a bookmark"))) (define-key map [insert] `(menu-item ,(purecopy "Insert Contents...") bookmark-insert :help ,(purecopy "Insert the text of the file pointed to by a bookmark"))) (define-key map [set] `(menu-item ,(purecopy "Set Bookmark...") bookmark-set :help ,(purecopy "Set a bookmark named inside a file."))) (define-key map [jump] `(menu-item ,(purecopy "Jump to Bookmark...") bookmark-jump :help ,(purecopy "Jump to a bookmark (a point in some file)"))) map)) (defalias 'menu-bar-bookmark-map menu-bar-bookmark-map) ;;;*** ;;;### (autoloads (browse-url-elinks browse-url-kde browse-url-generic ;;;;;; browse-url-mail browse-url-text-emacs browse-url-text-xterm ;;;;;; browse-url-w3-gnudoit browse-url-w3 browse-url-cci browse-url-mosaic ;;;;;; browse-url-gnome-moz browse-url-emacs browse-url-galeon browse-url-firefox ;;;;;; browse-url-mozilla browse-url-netscape browse-url-default-browser ;;;;;; browse-url-at-mouse browse-url-at-point browse-url browse-url-of-region ;;;;;; browse-url-of-dired-file browse-url-of-buffer browse-url-of-file ;;;;;; browse-url-url-at-point browse-url-galeon-program browse-url-firefox-program ;;;;;; browse-url-browser-function) "browse-url" "net/browse-url.el" ;;;;;; (19259 35395)) ;;; Generated autoloads from net/browse-url.el (defvar browse-url-browser-function (cond ((memq system-type '(windows-nt ms-dos cygwin)) 'browse-url-default-windows-browser) ((memq system-type '(darwin)) 'browse-url-default-macosx-browser) (t 'browse-url-default-browser)) "\ Function to display the current buffer in a WWW browser. This is used by the `browse-url-at-point', `browse-url-at-mouse', and `browse-url-of-file' commands. If the value is not a function it should be a list of pairs \(REGEXP . FUNCTION). In this case the function called will be the one associated with the first REGEXP which matches the current URL. The function is passed the URL and any other args of `browse-url'. The last regexp should probably be \".\" to specify a default browser.") (custom-autoload 'browse-url-browser-function "browse-url" t) (defvar browse-url-firefox-program (purecopy "firefox") "\ The name by which to invoke Firefox.") (custom-autoload 'browse-url-firefox-program "browse-url" t) (defvar browse-url-galeon-program (purecopy "galeon") "\ The name by which to invoke Galeon.") (custom-autoload 'browse-url-galeon-program "browse-url" t) (autoload 'browse-url-url-at-point "browse-url" "\ Not documented \(fn)" nil nil) (autoload 'browse-url-of-file "browse-url" "\ Ask a WWW browser to display FILE. Display the current buffer's file if FILE is nil or if called interactively. Turn the filename into a URL with function `browse-url-file-url'. Pass the URL to a browser using the `browse-url' function then run `browse-url-of-file-hook'. \(fn &optional FILE)" t nil) (autoload 'browse-url-of-buffer "browse-url" "\ Ask a WWW browser to display BUFFER. Display the current buffer if BUFFER is nil. Display only the currently visible part of BUFFER (from a temporary file) if buffer is narrowed. \(fn &optional BUFFER)" t nil) (autoload 'browse-url-of-dired-file "browse-url" "\ In Dired, ask a WWW browser to display the file named on this line. \(fn)" t nil) (autoload 'browse-url-of-region "browse-url" "\ Ask a WWW browser to display the current region. \(fn MIN MAX)" t nil) (autoload 'browse-url "browse-url" "\ Ask a WWW browser to load URL. Prompts for a URL, defaulting to the URL at or before point. Variable `browse-url-browser-function' says which browser to use. \(fn URL &rest ARGS)" t nil) (autoload 'browse-url-at-point "browse-url" "\ Ask a WWW browser to load the URL at or before point. Doesn't let you edit the URL like `browse-url'. Variable `browse-url-browser-function' says which browser to use. \(fn &optional ARG)" t nil) (autoload 'browse-url-at-mouse "browse-url" "\ Ask a WWW browser to load a URL clicked with the mouse. The URL is the one around or before the position of the mouse click but point is not changed. Doesn't let you edit the URL like `browse-url'. Variable `browse-url-browser-function' says which browser to use. \(fn EVENT)" t nil) (autoload 'browse-url-default-browser "browse-url" "\ Find a suitable browser and ask it to load URL. Default to the URL around or before point. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new window, if possible, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. The order attempted is gnome-moz-remote, Mozilla, Firefox, Galeon, Konqueror, Netscape, Mosaic, Lynx in an xterm, and then W3. \(fn URL &rest ARGS)" nil nil) (autoload 'browse-url-netscape "browse-url" "\ Ask the Netscape WWW browser to load URL. Default to the URL around or before point. The strings in variable `browse-url-netscape-arguments' are also passed to Netscape. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new Netscape window, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. If `browse-url-netscape-new-window-is-tab' is non-nil, then whenever a document would otherwise be loaded in a new window, it is loaded in a new tab in an existing window instead. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-mozilla "browse-url" "\ Ask the Mozilla WWW browser to load URL. Default to the URL around or before point. The strings in variable `browse-url-mozilla-arguments' are also passed to Mozilla. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new Mozilla window, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. If `browse-url-mozilla-new-window-is-tab' is non-nil, then whenever a document would otherwise be loaded in a new window, it is loaded in a new tab in an existing window instead. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-firefox "browse-url" "\ Ask the Firefox WWW browser to load URL. Default to the URL around or before point. The strings in variable `browse-url-firefox-arguments' are also passed to Firefox. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new Firefox window, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. If `browse-url-firefox-new-window-is-tab' is non-nil, then whenever a document would otherwise be loaded in a new window, it is loaded in a new tab in an existing window instead. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. On MS-Windows systems the optional `new-window' parameter is ignored. Firefox for Windows does not support the \"-remote\" command line parameter. Therefore, the `browse-url-new-window-flag' and `browse-url-firefox-new-window-is-tab' are ignored as well. Firefox on Windows will always open the requested URL in a new window. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-galeon "browse-url" "\ Ask the Galeon WWW browser to load URL. Default to the URL around or before point. The strings in variable `browse-url-galeon-arguments' are also passed to Galeon. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new Galeon window, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. If `browse-url-galeon-new-window-is-tab' is non-nil, then whenever a document would otherwise be loaded in a new window, it is loaded in a new tab in an existing window instead. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-emacs "browse-url" "\ Ask Emacs to load URL into a buffer and show it in another window. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-gnome-moz "browse-url" "\ Ask Mozilla/Netscape to load URL via the GNOME program `gnome-moz-remote'. Default to the URL around or before point. The strings in variable `browse-url-gnome-moz-arguments' are also passed. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new browser window, otherwise use an existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-mosaic "browse-url" "\ Ask the XMosaic WWW browser to load URL. Default to the URL around or before point. The strings in variable `browse-url-mosaic-arguments' are also passed to Mosaic and the program is invoked according to the variable `browse-url-mosaic-program'. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new Mosaic window, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-cci "browse-url" "\ Ask the XMosaic WWW browser to load URL. Default to the URL around or before point. This function only works for XMosaic version 2.5 or later. You must select `CCI' from XMosaic's File menu, set the CCI Port Address to the value of variable `browse-url-CCI-port', and enable `Accept requests'. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new browser window, otherwise use a random existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-w3 "browse-url" "\ Ask the w3 WWW browser to load URL. Default to the URL around or before point. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new window. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-w3-gnudoit "browse-url" "\ Ask another Emacs running gnuserv to load the URL using the W3 browser. The `browse-url-gnudoit-program' program is used with options given by `browse-url-gnudoit-args'. Default to the URL around or before point. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-text-xterm "browse-url" "\ Ask a text browser to load URL. URL defaults to the URL around or before point. This runs the text browser specified by `browse-url-text-browser'. in an Xterm window using the Xterm program named by `browse-url-xterm-program' with possible additional arguments `browse-url-xterm-args'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-text-emacs "browse-url" "\ Ask a text browser to load URL. URL defaults to the URL around or before point. This runs the text browser specified by `browse-url-text-browser'. With a prefix argument, it runs a new browser process in a new buffer. When called interactively, if variable `browse-url-new-window-flag' is non-nil, load the document in a new browser process in a new term window, otherwise use any existing one. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-BUFFER)" t nil) (autoload 'browse-url-mail "browse-url" "\ Open a new mail message buffer within Emacs for the RFC 2368 URL. Default to using the mailto: URL around or before point as the recipient's address. Supplying a non-nil interactive prefix argument will cause the mail to be composed in another window rather than the current one. When called interactively, if variable `browse-url-new-window-flag' is non-nil use `compose-mail-other-window', otherwise `compose-mail'. A non-nil interactive prefix argument reverses the effect of `browse-url-new-window-flag'. When called non-interactively, optional second argument NEW-WINDOW is used instead of `browse-url-new-window-flag'. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-generic "browse-url" "\ Ask the WWW browser defined by `browse-url-generic-program' to load URL. Default to the URL around or before point. A fresh copy of the browser is started up in a new process with possible additional arguments `browse-url-generic-args'. This is appropriate for browsers which don't offer a form of remote control. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-kde "browse-url" "\ Ask the KDE WWW browser to load URL. Default to the URL around or before point. \(fn URL &optional NEW-WINDOW)" t nil) (autoload 'browse-url-elinks "browse-url" "\ Ask the Elinks WWW browser to load URL. Default to the URL around the point. The document is loaded in a new tab of a running Elinks or, if none yet running, a newly started instance. The Elinks command will be prepended by the program+arguments from `browse-url-elinks-wrapper'. \(fn URL &optional NEW-WINDOW)" t nil) ;;;*** ;;;### (autoloads (snarf-bruces bruce) "bruce" "play/bruce.el" (19259 ;;;;;; 35395)) ;;; Generated autoloads from play/bruce.el (autoload 'bruce "bruce" "\ Adds that special touch of class to your outgoing mail. \(fn)" t nil) (autoload 'snarf-bruces "bruce" "\ Return a vector containing the lines from `bruce-phrases-file'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (bs-show bs-customize bs-cycle-previous bs-cycle-next) ;;;;;; "bs" "bs.el" (19259 35395)) ;;; Generated autoloads from bs.el (autoload 'bs-cycle-next "bs" "\ Select next buffer defined by buffer cycling. The buffers taking part in buffer cycling are defined by buffer configuration `bs-cycle-configuration-name'. \(fn)" t nil) (autoload 'bs-cycle-previous "bs" "\ Select previous buffer defined by buffer cycling. The buffers taking part in buffer cycling are defined by buffer configuration `bs-cycle-configuration-name'. \(fn)" t nil) (autoload 'bs-customize "bs" "\ Customization of group bs for Buffer Selection Menu. \(fn)" t nil) (autoload 'bs-show "bs" "\ Make a menu of buffers so you can manipulate buffers or the buffer list. \\<bs-mode-map> There are many key commands similar to `Buffer-menu-mode' for manipulating the buffer list and the buffers themselves. User can move with [up] or [down], select a buffer by \\[bs-select] or [SPC] Type \\[bs-kill] to leave Buffer Selection Menu without a selection. Type \\[bs-help] after invocation to get help on commands available. With prefix argument ARG show a different buffer list. Function `bs--configuration-name-for-prefix-arg' determine accordingly name of buffer configuration. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (bubbles) "bubbles" "play/bubbles.el" (19259 35395)) ;;; Generated autoloads from play/bubbles.el (autoload 'bubbles "bubbles" "\ Play Bubbles game. \\<bubbles-mode-map> The goal is to remove all bubbles with as few moves as possible. \\[bubbles-plop] on a bubble removes that bubble and all connected bubbles of the same color. Unsupported bubbles fall down, and columns that do not contain any bubbles suck the columns on its right towards the left. \\[bubbles-set-game-easy] sets the difficulty to easy. \\[bubbles-set-game-medium] sets the difficulty to medium. \\[bubbles-set-game-difficult] sets the difficulty to difficult. \\[bubbles-set-game-hard] sets the difficulty to hard. \(fn)" t nil) ;;;*** ;;;### (autoloads (bug-reference-prog-mode bug-reference-mode) "bug-reference" ;;;;;; "progmodes/bug-reference.el" (19259 35395)) ;;; Generated autoloads from progmodes/bug-reference.el (put 'bug-reference-url-format 'safe-local-variable 'stringp) (autoload 'bug-reference-mode "bug-reference" "\ Minor mode to buttonize bugzilla references in the current buffer. \(fn &optional ARG)" t nil) (autoload 'bug-reference-prog-mode "bug-reference" "\ Like `bug-reference-mode', but only buttonize in comments and strings. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (batch-byte-recompile-directory batch-byte-compile ;;;;;; batch-byte-compile-if-not-done display-call-tree byte-compile ;;;;;; compile-defun byte-compile-file byte-recompile-directory ;;;;;; byte-force-recompile byte-compile-enable-warning byte-compile-disable-warning ;;;;;; byte-compile-warnings-safe-p) "bytecomp" "emacs-lisp/bytecomp.el" ;;;;;; (19259 35395)) ;;; Generated autoloads from emacs-lisp/bytecomp.el (put 'byte-compile-dynamic 'safe-local-variable 'booleanp) (put 'byte-compile-disable-print-circle 'safe-local-variable 'booleanp) (put 'byte-compile-dynamic-docstrings 'safe-local-variable 'booleanp) (put 'byte-compile-warnings 'safe-local-variable 'byte-compile-warnings-safe-p) (autoload 'byte-compile-warnings-safe-p "bytecomp" "\ Return non-nil if X is valid as a value of `byte-compile-warnings'. \(fn X)" nil nil) (autoload 'byte-compile-disable-warning "bytecomp" "\ Change `byte-compile-warnings' to disable WARNING. If `byte-compile-warnings' is t, set it to `(not WARNING)'. Otherwise, if the first element is `not', add WARNING, else remove it. Normally you should let-bind `byte-compile-warnings' before calling this, else the global value will be modified. \(fn WARNING)" nil nil) (autoload 'byte-compile-enable-warning "bytecomp" "\ Change `byte-compile-warnings' to enable WARNING. If `byte-compile-warnings' is `t', do nothing. Otherwise, if the first element is `not', remove WARNING, else add it. Normally you should let-bind `byte-compile-warnings' before calling this, else the global value will be modified. \(fn WARNING)" nil nil) (autoload 'byte-force-recompile "bytecomp" "\ Recompile every `.el' file in DIRECTORY that already has a `.elc' file. Files in subdirectories of DIRECTORY are processed also. \(fn DIRECTORY)" t nil) (autoload 'byte-recompile-directory "bytecomp" "\ Recompile every `.el' file in BYTECOMP-DIRECTORY that needs recompilation. This happens when a `.elc' file exists but is older than the `.el' file. Files in subdirectories of BYTECOMP-DIRECTORY are processed also. If the `.elc' file does not exist, normally this function *does not* compile the corresponding `.el' file. However, if the prefix argument BYTECOMP-ARG is 0, that means do compile all those files. A nonzero BYTECOMP-ARG means ask the user, for each such `.el' file, whether to compile it. A nonzero BYTECOMP-ARG also means ask about each subdirectory before scanning it. If the third argument BYTECOMP-FORCE is non-nil, recompile every `.el' file that already has a `.elc' file. \(fn BYTECOMP-DIRECTORY &optional BYTECOMP-ARG BYTECOMP-FORCE)" t nil) (put 'no-byte-compile 'safe-local-variable 'booleanp) (autoload 'byte-compile-file "bytecomp" "\ Compile a file of Lisp code named BYTECOMP-FILENAME into a file of byte code. The output file's name is generated by passing BYTECOMP-FILENAME to the function `byte-compile-dest-file' (which see). With prefix arg (noninteractively: 2nd arg), LOAD the file after compiling. The value is non-nil if there were no errors, nil if errors. \(fn BYTECOMP-FILENAME &optional LOAD)" t nil) (autoload 'compile-defun "bytecomp" "\ Compile and evaluate the current top-level form. Print the result in the echo area. With argument ARG, insert value in current buffer after the form. \(fn &optional ARG)" t nil) (autoload 'byte-compile "bytecomp" "\ If FORM is a symbol, byte-compile its function definition. If FORM is a lambda or a macro, byte-compile it as a function. \(fn FORM)" nil nil) (autoload 'display-call-tree "bytecomp" "\ Display a call graph of a specified file. This lists which functions have been called, what functions called them, and what functions they call. The list includes all functions whose definitions have been compiled in this Emacs session, as well as all functions called by those functions. The call graph does not include macros, inline functions, or primitives that the byte-code interpreter knows about directly (eq, cons, etc.). The call tree also lists those functions which are not known to be called \(that is, to which no calls have been compiled), and which cannot be invoked interactively. \(fn &optional FILENAME)" t nil) (autoload 'batch-byte-compile-if-not-done "bytecomp" "\ Like `byte-compile-file' but doesn't recompile if already up to date. Use this from the command line, with `-batch'; it won't work in an interactive Emacs. \(fn)" nil nil) (autoload 'batch-byte-compile "bytecomp" "\ Run `byte-compile-file' on the files remaining on the command line. Use this from the command line, with `-batch'; it won't work in an interactive Emacs. Each file is processed even if an error occurred previously. For example, invoke \"emacs -batch -f batch-byte-compile $emacs/ ~/*.el\". If NOFORCE is non-nil, don't recompile a file that seems to be already up-to-date. \(fn &optional NOFORCE)" nil nil) (autoload 'batch-byte-recompile-directory "bytecomp" "\ Run `byte-recompile-directory' on the dirs remaining on the command line. Must be used only with `-batch', and kills Emacs on completion. For example, invoke `emacs -batch -f batch-byte-recompile-directory .'. Optional argument ARG is passed as second argument ARG to `byte-recompile-directory'; see there for its possible values and corresponding effects. \(fn &optional ARG)" nil nil) ;;;*** ;;;### (autoloads nil "cal-china" "calendar/cal-china.el" (19259 ;;;;;; 35396)) ;;; Generated autoloads from calendar/cal-china.el (put 'calendar-chinese-time-zone 'risky-local-variable t) (put 'chinese-calendar-time-zone 'risky-local-variable t) ;;;*** ;;;### (autoloads nil "cal-dst" "calendar/cal-dst.el" (19259 35396)) ;;; Generated autoloads from calendar/cal-dst.el (put 'calendar-daylight-savings-starts 'risky-local-variable t) (put 'calendar-daylight-savings-ends 'risky-local-variable t) (put 'calendar-current-time-zone-cache 'risky-local-variable t) ;;;*** ;;;### (autoloads (calendar-hebrew-list-yahrzeits) "cal-hebrew" "calendar/cal-hebrew.el" ;;;;;; (19259 35396)) ;;; Generated autoloads from calendar/cal-hebrew.el (autoload 'calendar-hebrew-list-yahrzeits "cal-hebrew" "\ List Yahrzeit dates for *Gregorian* DEATH-DATE from START-YEAR to END-YEAR. When called interactively from the calendar window, the date of death is taken from the cursor position. \(fn DEATH-DATE START-YEAR END-YEAR)" t nil) (define-obsolete-function-alias 'list-yahrzeit-dates 'calendar-hebrew-list-yahrzeits "23.1") ;;;*** ;;;### (autoloads (defmath calc-embedded-activate calc-embedded calc-grab-rectangle ;;;;;; calc-grab-region full-calc-keypad calc-keypad calc-eval quick-calc ;;;;;; full-calc calc calc-dispatch) "calc" "calc/calc.el" (19259 ;;;;;; 35395)) ;;; Generated autoloads from calc/calc.el (define-key ctl-x-map "*" 'calc-dispatch) (autoload 'calc-dispatch "calc" "\ Invoke the GNU Emacs Calculator. See `calc-dispatch-help' for details. \(fn &optional ARG)" t nil) (autoload 'calc "calc" "\ The Emacs Calculator. Full documentation is listed under \"calc-mode\". \(fn &optional ARG FULL-DISPLAY INTERACTIVE)" t nil) (autoload 'full-calc "calc" "\ Invoke the Calculator and give it a full-sized window. \(fn &optional INTERACTIVE)" t nil) (autoload 'quick-calc "calc" "\ Do a quick calculation in the minibuffer without invoking full Calculator. \(fn)" t nil) (autoload 'calc-eval "calc" "\ Do a quick calculation and return the result as a string. Return value will either be the formatted result in string form, or a list containing a character position and an error message in string form. \(fn STR &optional SEPARATOR &rest ARGS)" nil nil) (autoload 'calc-keypad "calc" "\ Invoke the Calculator in \"visual keypad\" mode. This is most useful in the X window system. In this mode, click on the Calc \"buttons\" using the left mouse button. Or, position the cursor manually and do M-x calc-keypad-press. \(fn &optional INTERACTIVE)" t nil) (autoload 'full-calc-keypad "calc" "\ Invoke the Calculator in full-screen \"visual keypad\" mode. See calc-keypad for details. \(fn &optional INTERACTIVE)" t nil) (autoload 'calc-grab-region "calc" "\ Parse the region as a vector of numbers and push it on the Calculator stack. \(fn TOP BOT ARG)" t nil) (autoload 'calc-grab-rectangle "calc" "\ Parse a rectangle as a matrix of numbers and push it on the Calculator stack. \(fn TOP BOT ARG)" t nil) (autoload 'calc-embedded "calc" "\ Start Calc Embedded mode on the formula surrounding point. \(fn ARG &optional END OBEG OEND)" t nil) (autoload 'calc-embedded-activate "calc" "\ Scan the current editing buffer for all embedded := and => formulas. Also looks for the equivalent TeX words, \\gets and \\evalto. \(fn &optional ARG CBUF)" t nil) (autoload 'defmath "calc" "\ Define Calc function. Like `defun' except that code in the body of the definition can make use of the full range of Calc data types and the usual arithmetic operations are converted to their Calc equivalents. The prefix `calcFunc-' is added to the specified name to get the actual Lisp function name. See Info node `(calc)Defining Functions'. \(fn FUNC ARGS &rest BODY)" nil (quote macro)) ;;;*** ;;;### (autoloads (calculator) "calculator" "calculator.el" (19259 ;;;;;; 35396)) ;;; Generated autoloads from calculator.el (autoload 'calculator "calculator" "\ Run the Emacs calculator. See the documentation for `calculator-mode' for more information. \(fn)" t nil) ;;;*** ;;;### (autoloads (calendar) "calendar" "calendar/calendar.el" (19259 ;;;;;; 35396)) ;;; Generated autoloads from calendar/calendar.el (autoload 'calendar "calendar" "\ Display a three-month Gregorian calendar. The three months appear side by side, with the current month in the middle surrounded by the previous and next months. The cursor is put on today's date. If optional prefix argument ARG is non-nil, prompts for the central month and year. Once in the calendar window, future or past months can be moved into view. Arbitrary months can be displayed, or the calendar can be scrolled forward or backward. The cursor can be moved forward or backward by one day, one week, one month, or one year. All of these commands take prefix arguments which, when negative, cause movement in the opposite direction. For convenience, the digit keys and the minus sign are automatically prefixes. Use \\[describe-mode] for details of the key bindings in the calendar window. Displays the calendar in a separate window, or optionally in a separate frame, depending on the value of `calendar-setup'. If `calendar-view-diary-initially-flag' is non-nil, also displays the diary entries for the current date (or however many days `diary-number-of-entries' specifies). This variable can be overridden by `calendar-setup'. As well as being displayed, diary entries can also be marked on the calendar (see `calendar-mark-diary-entries-flag'). Runs the following hooks: `calendar-load-hook' - after loading calendar.el `calendar-today-visible-hook', `calendar-today-invisible-hook' - after generating a calendar, if today's date is visible or not, respectively `calendar-initial-window-hook' - after first creating a calendar This function is suitable for execution in a .emacs file. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (canlock-verify canlock-insert-header) "canlock" ;;;;;; "gnus/canlock.el" (19259 35397)) ;;; Generated autoloads from gnus/canlock.el (autoload 'canlock-insert-header "canlock" "\ Insert a Cancel-Key and/or a Cancel-Lock header if possible. \(fn &optional ID-FOR-KEY ID-FOR-LOCK PASSWORD)" nil nil) (autoload 'canlock-verify "canlock" "\ Verify Cancel-Lock or Cancel-Key in BUFFER. If BUFFER is nil, the current buffer is assumed. Signal an error if it fails. \(fn &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (capitalized-words-mode) "cap-words" "progmodes/cap-words.el" ;;;;;; (19259 35397)) ;;; Generated autoloads from progmodes/cap-words.el (autoload 'capitalized-words-mode "cap-words" "\ Toggle Capitalized Words mode. In this minor mode, a word boundary occurs immediately before an uppercase letter in a symbol. This is in addition to all the normal boundaries given by the syntax and category tables. There is no restriction to ASCII. E.g. the beginning of words in the following identifier are as marked: capitalizedWorDD ^ ^ ^^ Note that these word boundaries only apply for word motion and marking commands such as \\[forward-word]. This mode does not affect word boundaries found by regexp matching (`\\>', `\\w' &c). This style of identifiers is common in environments like Java ones, where underscores aren't trendy enough. Capitalization rules are sometimes part of the language, e.g. Haskell, which may thus encourage such a style. It is appropriate to add `capitalized-words-mode' to the mode hook for programming language modes in which you encounter variables like this, e.g. `java-mode-hook'. It's unlikely to cause trouble if such identifiers aren't used. See also `glasses-mode' and `studlify-word'. Obsoletes `c-forward-into-nomenclature'. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads nil "cc-compat" "progmodes/cc-compat.el" (19259 ;;;;;; 35397)) ;;; Generated autoloads from progmodes/cc-compat.el (put 'c-indent-level 'safe-local-variable 'integerp) ;;;*** ;;;### (autoloads (c-guess-basic-syntax) "cc-engine" "progmodes/cc-engine.el" ;;;;;; (19259 35397)) ;;; Generated autoloads from progmodes/cc-engine.el (autoload 'c-guess-basic-syntax "cc-engine" "\ Return the syntactic context of the current line. \(fn)" nil nil) ;;;*** ;;;### (autoloads (pike-mode idl-mode java-mode objc-mode c++-mode ;;;;;; c-mode c-initialize-cc-mode) "cc-mode" "progmodes/cc-mode.el" ;;;;;; (19259 35397)) ;;; Generated autoloads from progmodes/cc-mode.el (autoload 'c-initialize-cc-mode "cc-mode" "\ Initialize CC Mode for use in the current buffer. If the optional NEW-STYLE-INIT is nil or left out then all necessary initialization to run CC Mode for the C language is done. Otherwise only some basic setup is done, and a call to `c-init-language-vars' or `c-init-language-vars-for' is necessary too (which gives more control). See \"cc-mode.el\" for more info. \(fn &optional NEW-STYLE-INIT)" nil nil) (defvar c-mode-syntax-table nil "\ Syntax table used in c-mode buffers.") (add-to-list 'auto-mode-alist '("\\.\\(cc\\|hh\\)\\'" . c++-mode)) (add-to-list 'auto-mode-alist '("\\.[ch]\\(pp\\|xx\\|\\+\\+\\)\\'" . c++-mode)) (add-to-list 'auto-mode-alist '("\\.\\(CC?\\|HH?\\)\\'" . c++-mode)) (add-to-list 'auto-mode-alist '("\\.[ch]\\'" . c-mode)) (add-to-list 'auto-mode-alist '("\\.y\\(acc\\)?\\'" . c-mode)) (add-to-list 'auto-mode-alist '("\\.lex\\'" . c-mode)) (add-to-list 'auto-mode-alist '("\\.i\\'" . c-mode)) (add-to-list 'auto-mode-alist '("\\.ii\\'" . c++-mode)) (autoload 'c-mode "cc-mode" "\ Major mode for editing K&R and ANSI C code. To submit a problem report, enter `\\[c-submit-bug-report]' from a c-mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case, and send the message. To see what version of CC Mode you are running, enter `\\[c-version]'. The hook `c-mode-common-hook' is run with no args at mode initialization, then `c-mode-hook'. Key bindings: \\{c-mode-map} \(fn)" t nil) (defvar c++-mode-syntax-table nil "\ Syntax table used in c++-mode buffers.") (autoload 'c++-mode "cc-mode" "\ Major mode for editing C++ code. To submit a problem report, enter `\\[c-submit-bug-report]' from a c++-mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case, and send the message. To see what version of CC Mode you are running, enter `\\[c-version]'. The hook `c-mode-common-hook' is run with no args at mode initialization, then `c++-mode-hook'. Key bindings: \\{c++-mode-map} \(fn)" t nil) (defvar objc-mode-syntax-table nil "\ Syntax table used in objc-mode buffers.") (add-to-list 'auto-mode-alist '("\\.m\\'" . objc-mode)) (autoload 'objc-mode "cc-mode" "\ Major mode for editing Objective C code. To submit a problem report, enter `\\[c-submit-bug-report]' from an objc-mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case, and send the message. To see what version of CC Mode you are running, enter `\\[c-version]'. The hook `c-mode-common-hook' is run with no args at mode initialization, then `objc-mode-hook'. Key bindings: \\{objc-mode-map} \(fn)" t nil) (defvar java-mode-syntax-table nil "\ Syntax table used in java-mode buffers.") (add-to-list 'auto-mode-alist '("\\.java\\'" . java-mode)) (autoload 'java-mode "cc-mode" "\ Major mode for editing Java code. To submit a problem report, enter `\\[c-submit-bug-report]' from a java-mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case, and send the message. To see what version of CC Mode you are running, enter `\\[c-version]'. The hook `c-mode-common-hook' is run with no args at mode initialization, then `java-mode-hook'. Key bindings: \\{java-mode-map} \(fn)" t nil) (defvar idl-mode-syntax-table nil "\ Syntax table used in idl-mode buffers.") (add-to-list 'auto-mode-alist '("\\.idl\\'" . idl-mode)) (autoload 'idl-mode "cc-mode" "\ Major mode for editing CORBA's IDL, PSDL and CIDL code. To submit a problem report, enter `\\[c-submit-bug-report]' from an idl-mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case, and send the message. To see what version of CC Mode you are running, enter `\\[c-version]'. The hook `c-mode-common-hook' is run with no args at mode initialization, then `idl-mode-hook'. Key bindings: \\{idl-mode-map} \(fn)" t nil) (defvar pike-mode-syntax-table nil "\ Syntax table used in pike-mode buffers.") (add-to-list 'auto-mode-alist '("\\.\\(u?lpc\\|pike\\|pmod\\(.in\\)?\\)\\'" . pike-mode)) (add-to-list 'interpreter-mode-alist '("pike" . pike-mode)) (autoload 'pike-mode "cc-mode" "\ Major mode for editing Pike code. To submit a problem report, enter `\\[c-submit-bug-report]' from a pike-mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case, and send the message. To see what version of CC Mode you are running, enter `\\[c-version]'. The hook `c-mode-common-hook' is run with no args at mode initialization, then `pike-mode-hook'. Key bindings: \\{pike-mode-map} \(fn)" t nil) (add-to-list 'auto-mode-alist '("\\.awk\\'" . awk-mode)) (add-to-list 'interpreter-mode-alist '("awk" . awk-mode)) (add-to-list 'interpreter-mode-alist '("mawk" . awk-mode)) (add-to-list 'interpreter-mode-alist '("nawk" . awk-mode)) (add-to-list 'interpreter-mode-alist '("gawk" . awk-mode)) (autoload 'awk-mode "cc-mode" "Major mode for editing AWK code." t) ;;;*** ;;;### (autoloads (c-set-offset c-add-style c-set-style) "cc-styles" ;;;;;; "progmodes/cc-styles.el" (19259 35398)) ;;; Generated autoloads from progmodes/cc-styles.el (autoload 'c-set-style "cc-styles" "\ Set the current buffer to use the style STYLENAME. STYLENAME, a string, must be an existing CC Mode style - These are contained in the variable `c-style-alist'. The variable `c-indentation-style' will get set to STYLENAME. \"Setting the style\" is done by setting CC Mode's \"style variables\" to the values indicated by the pertinent entry in `c-style-alist'. Other variables might get set too. If DONT-OVERRIDE is neither nil nor t, style variables whose default values have been set (more precisely, whose default values are not the symbol `set-from-style') will not be changed. This avoids overriding global settings done in ~/.emacs. It is useful to call c-set-style from a mode hook in this way. If DONT-OVERRIDE is t, style variables that already have values (i.e., whose values are not the symbol `set-from-style') will not be overridden. CC Mode calls c-set-style internally in this way whilst initializing a buffer; if cc-set-style is called like this from anywhere else, it will usually behave as a null operation. \(fn STYLENAME &optional DONT-OVERRIDE)" t nil) (autoload 'c-add-style "cc-styles" "\ Adds a style to `c-style-alist', or updates an existing one. STYLE is a string identifying the style to add or update. DESCRIPTION is an association list describing the style and must be of the form: ([BASESTYLE] (VARIABLE . VALUE) [(VARIABLE . VALUE) ...]) See the variable `c-style-alist' for the semantics of BASESTYLE, VARIABLE and VALUE. This function also sets the current style to STYLE using `c-set-style' if the optional SET-P flag is non-nil. \(fn STYLE DESCRIPTION &optional SET-P)" t nil) (autoload 'c-set-offset "cc-styles" "\ Change the value of a syntactic element symbol in `c-offsets-alist'. SYMBOL is the syntactic element symbol to change and OFFSET is the new offset for that syntactic element. The optional argument is not used and exists only for compatibility reasons. \(fn SYMBOL OFFSET &optional IGNORED)" t nil) ;;;*** ;;;### (autoloads nil "cc-vars" "progmodes/cc-vars.el" (19259 35398)) ;;; Generated autoloads from progmodes/cc-vars.el (put 'c-basic-offset 'safe-local-variable 'integerp) (put 'c-backslash-column 'safe-local-variable 'integerp) (put 'c-file-style 'safe-local-variable 'string-or-null-p) ;;;*** ;;;### (autoloads (ccl-execute-with-args check-ccl-program define-ccl-program ;;;;;; declare-ccl-program ccl-dump ccl-compile) "ccl" "international/ccl.el" ;;;;;; (19259 35397)) ;;; Generated autoloads from international/ccl.el (autoload 'ccl-compile "ccl" "\ Return the compiled code of CCL-PROGRAM as a vector of integers. \(fn CCL-PROGRAM)" nil nil) (autoload 'ccl-dump "ccl" "\ Disassemble compiled CCL-CODE. \(fn CCL-CODE)" nil nil) (autoload 'declare-ccl-program "ccl" "\ Declare NAME as a name of CCL program. This macro exists for backward compatibility. In the old version of Emacs, to compile a CCL program which calls another CCL program not yet defined, it must be declared as a CCL program in advance. But, now CCL program names are resolved not at compile time but before execution. Optional arg VECTOR is a compiled CCL code of the CCL program. \(fn NAME &optional VECTOR)" nil (quote macro)) (autoload 'define-ccl-program "ccl" "\ Set NAME the compiled code of CCL-PROGRAM. CCL-PROGRAM has this form: (BUFFER_MAGNIFICATION CCL_MAIN_CODE [ CCL_EOF_CODE ]) BUFFER_MAGNIFICATION is an integer value specifying the approximate output buffer magnification size compared with the bytes of input data text. It is assured that the actual output buffer has 256 bytes more than the size calculated by BUFFER_MAGNIFICATION. If the value is zero, the CCL program can't execute `read' and `write' commands. CCL_MAIN_CODE and CCL_EOF_CODE are CCL program codes. CCL_MAIN_CODE executed at first. If there's no more input data when `read' command is executed in CCL_MAIN_CODE, CCL_EOF_CODE is executed. If CCL_MAIN_CODE is terminated, CCL_EOF_CODE is not executed. Here's the syntax of CCL program code in BNF notation. The lines starting by two semicolons (and optional leading spaces) describe the semantics. CCL_MAIN_CODE := CCL_BLOCK CCL_EOF_CODE := CCL_BLOCK CCL_BLOCK := STATEMENT | (STATEMENT [STATEMENT ...]) STATEMENT := SET | IF | BRANCH | LOOP | REPEAT | BREAK | READ | WRITE | CALL | TRANSLATE | MAP | LOOKUP | END SET := (REG = EXPRESSION) | (REG ASSIGNMENT_OPERATOR EXPRESSION) ;; The following form is the same as (r0 = integer). | integer EXPRESSION := ARG | (EXPRESSION OPERATOR ARG) ;; Evaluate EXPRESSION. If the result is nonzero, execute ;; CCL_BLOCK_0. Otherwise, execute CCL_BLOCK_1. IF := (if EXPRESSION CCL_BLOCK_0 CCL_BLOCK_1) ;; Evaluate EXPRESSION. Provided that the result is N, execute ;; CCL_BLOCK_N. BRANCH := (branch EXPRESSION CCL_BLOCK_0 [CCL_BLOCK_1 ...]) ;; Execute STATEMENTs until (break) or (end) is executed. LOOP := (loop STATEMENT [STATEMENT ...]) ;; Terminate the most inner loop. BREAK := (break) REPEAT := ;; Jump to the head of the most inner loop. (repeat) ;; Same as: ((write [REG | integer | string]) ;; (repeat)) | (write-repeat [REG | integer | string]) ;; Same as: ((write REG [ARRAY]) ;; (read REG) ;; (repeat)) | (write-read-repeat REG [ARRAY]) ;; Same as: ((write integer) ;; (read REG) ;; (repeat)) | (write-read-repeat REG integer) READ := ;; Set REG_0 to a byte read from the input text, set REG_1 ;; to the next byte read, and so on. (read REG_0 [REG_1 ...]) ;; Same as: ((read REG) ;; (if (REG OPERATOR ARG) CCL_BLOCK_0 CCL_BLOCK_1)) | (read-if (REG OPERATOR ARG) CCL_BLOCK_0 CCL_BLOCK_1) ;; Same as: ((read REG) ;; (branch REG CCL_BLOCK_0 [CCL_BLOCK_1 ...])) | (read-branch REG CCL_BLOCK_0 [CCL_BLOCK_1 ...]) ;; Read a character from the input text while parsing ;; multibyte representation, set REG_0 to the charset ID of ;; the character, set REG_1 to the code point of the ;; character. If the dimension of charset is two, set REG_1 ;; to ((CODE0 << 7) | CODE1), where CODE0 is the first code ;; point and CODE1 is the second code point. | (read-multibyte-character REG_0 REG_1) WRITE := ;; Write REG_0, REG_1, ... to the output buffer. If REG_N is ;; a multibyte character, write the corresponding multibyte ;; representation. (write REG_0 [REG_1 ...]) ;; Same as: ((r7 = EXPRESSION) ;; (write r7)) | (write EXPRESSION) ;; Write the value of `integer' to the output buffer. If it ;; is a multibyte character, write the corresponding multibyte ;; representation. | (write integer) ;; Write the byte sequence of `string' as is to the output ;; buffer. | (write string) ;; Same as: (write string) | string ;; Provided that the value of REG is N, write Nth element of ;; ARRAY to the output buffer. If it is a multibyte ;; character, write the corresponding multibyte ;; representation. | (write REG ARRAY) ;; Write a multibyte representation of a character whose ;; charset ID is REG_0 and code point is REG_1. If the ;; dimension of the charset is two, REG_1 should be ((CODE0 << ;; 7) | CODE1), where CODE0 is the first code point and CODE1 ;; is the second code point of the character. | (write-multibyte-character REG_0 REG_1) ;; Call CCL program whose name is ccl-program-name. CALL := (call ccl-program-name) ;; Terminate the CCL program. END := (end) ;; CCL registers that can contain any integer value. As r7 is also ;; used by CCL interpreter, its value is changed unexpectedly. REG := r0 | r1 | r2 | r3 | r4 | r5 | r6 | r7 ARG := REG | integer OPERATOR := ;; Normal arithmethic operators (same meaning as C code). + | - | * | / | % ;; Bitwize operators (same meaning as C code) | & | `|' | ^ ;; Shifting operators (same meaning as C code) | << | >> ;; (REG = ARG_0 <8 ARG_1) means: ;; (REG = ((ARG_0 << 8) | ARG_1)) | <8 ;; (REG = ARG_0 >8 ARG_1) means: ;; ((REG = (ARG_0 >> 8)) ;; (r7 = (ARG_0 & 255))) | >8 ;; (REG = ARG_0 // ARG_1) means: ;; ((REG = (ARG_0 / ARG_1)) ;; (r7 = (ARG_0 % ARG_1))) | // ;; Normal comparing operators (same meaning as C code) | < | > | == | <= | >= | != ;; If ARG_0 and ARG_1 are higher and lower byte of Shift-JIS ;; code, and CHAR is the corresponding JISX0208 character, ;; (REG = ARG_0 de-sjis ARG_1) means: ;; ((REG = CODE0) ;; (r7 = CODE1)) ;; where CODE0 is the first code point of CHAR, CODE1 is the ;; second code point of CHAR. | de-sjis ;; If ARG_0 and ARG_1 are the first and second code point of ;; JISX0208 character CHAR, and SJIS is the correponding ;; Shift-JIS code, ;; (REG = ARG_0 en-sjis ARG_1) means: ;; ((REG = HIGH) ;; (r7 = LOW)) ;; where HIGH is the higher byte of SJIS, LOW is the lower ;; byte of SJIS. | en-sjis ASSIGNMENT_OPERATOR := ;; Same meaning as C code += | -= | *= | /= | %= | &= | `|=' | ^= | <<= | >>= ;; (REG <8= ARG) is the same as: ;; ((REG <<= 8) ;; (REG |= ARG)) | <8= ;; (REG >8= ARG) is the same as: ;; ((r7 = (REG & 255)) ;; (REG >>= 8)) ;; (REG //= ARG) is the same as: ;; ((r7 = (REG % ARG)) ;; (REG /= ARG)) | //= ARRAY := `[' integer ... `]' TRANSLATE := (translate-character REG(table) REG(charset) REG(codepoint)) | (translate-character SYMBOL REG(charset) REG(codepoint)) ;; SYMBOL must refer to a table defined by `define-translation-table'. LOOKUP := (lookup-character SYMBOL REG(charset) REG(codepoint)) | (lookup-integer SYMBOL REG(integer)) ;; SYMBOL refers to a table defined by `define-translation-hash-table'. MAP := (iterate-multiple-map REG REG MAP-IDs) | (map-multiple REG REG (MAP-SET)) | (map-single REG REG MAP-ID) MAP-IDs := MAP-ID ... MAP-SET := MAP-IDs | (MAP-IDs) MAP-SET MAP-ID := integer \(fn NAME CCL-PROGRAM &optional DOC)" nil (quote macro)) (autoload 'check-ccl-program "ccl" "\ Check validity of CCL-PROGRAM. If CCL-PROGRAM is a symbol denoting a CCL program, return CCL-PROGRAM, else return nil. If CCL-PROGRAM is a vector and optional arg NAME (symbol) is supplied, register CCL-PROGRAM by name NAME, and return NAME. \(fn CCL-PROGRAM &optional NAME)" nil (quote macro)) (autoload 'ccl-execute-with-args "ccl" "\ Execute CCL-PROGRAM with registers initialized by the remaining args. The return value is a vector of resulting CCL registers. See the documentation of `define-ccl-program' for the detail of CCL program. \(fn CCL-PROG &rest ARGS)" nil nil) ;;;*** ;;;### (autoloads (cfengine-mode) "cfengine" "progmodes/cfengine.el" ;;;;;; (19259 35398)) ;;; Generated autoloads from progmodes/cfengine.el (autoload 'cfengine-mode "cfengine" "\ Major mode for editing cfengine input. There are no special keybindings by default. Action blocks are treated as defuns, i.e. \\[beginning-of-defun] moves to the action header. \(fn)" t nil) ;;;*** ;;;### (autoloads (check-declare-directory check-declare-file) "check-declare" ;;;;;; "emacs-lisp/check-declare.el" (19259 35404)) ;;; Generated autoloads from emacs-lisp/check-declare.el (autoload 'check-declare-file "check-declare" "\ Check veracity of all `declare-function' statements in FILE. See `check-declare-directory' for more information. \(fn FILE)" t nil) (autoload 'check-declare-directory "check-declare" "\ Check veracity of all `declare-function' statements under directory ROOT. Returns non-nil if any false statements are found. \(fn ROOT)" t nil) ;;;*** ;;;### (autoloads (checkdoc-minor-mode checkdoc-ispell-defun checkdoc-ispell-comments ;;;;;; checkdoc-ispell-continue checkdoc-ispell-start checkdoc-ispell-message-text ;;;;;; checkdoc-ispell-message-interactive checkdoc-ispell-interactive ;;;;;; checkdoc-ispell-current-buffer checkdoc-ispell checkdoc-defun ;;;;;; checkdoc-eval-defun checkdoc-message-text checkdoc-rogue-spaces ;;;;;; checkdoc-comments checkdoc-continue checkdoc-start checkdoc-current-buffer ;;;;;; checkdoc-eval-current-buffer checkdoc-message-interactive ;;;;;; checkdoc-interactive checkdoc checkdoc-list-of-strings-p) ;;;;;; "checkdoc" "emacs-lisp/checkdoc.el" (19259 35404)) ;;; Generated autoloads from emacs-lisp/checkdoc.el (put 'checkdoc-force-docstrings-flag 'safe-local-variable 'booleanp) (put 'checkdoc-force-history-flag 'safe-local-variable 'booleanp) (put 'checkdoc-permit-comma-termination-flag 'safe-local-variable 'booleanp) (put 'checkdoc-arguments-in-order-flag 'safe-local-variable 'booleanp) (put 'checkdoc-symbol-words 'safe-local-variable 'checkdoc-list-of-strings-p) (autoload 'checkdoc-list-of-strings-p "checkdoc" "\ Not documented \(fn OBJ)" nil nil) (autoload 'checkdoc "checkdoc" "\ Interactively check the entire buffer for style errors. The current status of the check will be displayed in a buffer which the users will view as each check is completed. \(fn)" t nil) (autoload 'checkdoc-interactive "checkdoc" "\ Interactively check the current buffer for doc string errors. Prefix argument START-HERE will start the checking from the current point, otherwise the check starts at the beginning of the current buffer. Allows navigation forward and backwards through document errors. Does not check for comment or space warnings. Optional argument SHOWSTATUS indicates that we should update the checkdoc status window instead of the usual behavior. \(fn &optional START-HERE SHOWSTATUS)" t nil) (autoload 'checkdoc-message-interactive "checkdoc" "\ Interactively check the current buffer for message string errors. Prefix argument START-HERE will start the checking from the current point, otherwise the check starts at the beginning of the current buffer. Allows navigation forward and backwards through document errors. Does not check for comment or space warnings. Optional argument SHOWSTATUS indicates that we should update the checkdoc status window instead of the usual behavior. \(fn &optional START-HERE SHOWSTATUS)" t nil) (autoload 'checkdoc-eval-current-buffer "checkdoc" "\ Evaluate and check documentation for the current buffer. Evaluation is done first because good documentation for something that doesn't work is just not useful. Comments, doc strings, and rogue spacing are all verified. \(fn)" t nil) (autoload 'checkdoc-current-buffer "checkdoc" "\ Check current buffer for document, comment, error style, and rogue spaces. With a prefix argument (in Lisp, the argument TAKE-NOTES), store all errors found in a warnings buffer, otherwise stop after the first error. \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-start "checkdoc" "\ Start scanning the current buffer for documentation string style errors. Only documentation strings are checked. Use `checkdoc-continue' to continue checking if an error cannot be fixed. Prefix argument TAKE-NOTES means to collect all the warning messages into a separate buffer. \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-continue "checkdoc" "\ Find the next doc string in the current buffer which has a style error. Prefix argument TAKE-NOTES means to continue through the whole buffer and save warnings in a separate buffer. Second optional argument START-POINT is the starting location. If this is nil, `point-min' is used instead. \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-comments "checkdoc" "\ Find missing comment sections in the current Emacs Lisp file. Prefix argument TAKE-NOTES non-nil means to save warnings in a separate buffer. Otherwise print a message. This returns the error if there is one. \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-rogue-spaces "checkdoc" "\ Find extra spaces at the end of lines in the current file. Prefix argument TAKE-NOTES non-nil means to save warnings in a separate buffer. Otherwise print a message. This returns the error if there is one. Optional argument INTERACT permits more interactive fixing. \(fn &optional TAKE-NOTES INTERACT)" t nil) (autoload 'checkdoc-message-text "checkdoc" "\ Scan the buffer for occurrences of the error function, and verify text. Optional argument TAKE-NOTES causes all errors to be logged. \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-eval-defun "checkdoc" "\ Evaluate the current form with `eval-defun' and check its documentation. Evaluation is done first so the form will be read before the documentation is checked. If there is a documentation error, then the display of what was evaluated will be overwritten by the diagnostic message. \(fn)" t nil) (autoload 'checkdoc-defun "checkdoc" "\ Examine the doc string of the function or variable under point. Call `error' if the doc string has problems. If NO-ERROR is non-nil, then do not call error, but call `message' instead. If the doc string passes the test, then check the function for rogue white space at the end of each line. \(fn &optional NO-ERROR)" t nil) (autoload 'checkdoc-ispell "checkdoc" "\ Check the style and spelling of everything interactively. Calls `checkdoc' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-current-buffer "checkdoc" "\ Check the style and spelling of the current buffer. Calls `checkdoc-current-buffer' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-current-buffer' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-interactive "checkdoc" "\ Check the style and spelling of the current buffer interactively. Calls `checkdoc-interactive' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-interactive' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-message-interactive "checkdoc" "\ Check the style and spelling of message text interactively. Calls `checkdoc-message-interactive' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-message-interactive' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-message-text "checkdoc" "\ Check the style and spelling of message text interactively. Calls `checkdoc-message-text' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-message-text' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-start "checkdoc" "\ Check the style and spelling of the current buffer. Calls `checkdoc-start' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-start' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-continue "checkdoc" "\ Check the style and spelling of the current buffer after point. Calls `checkdoc-continue' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-continue' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-comments "checkdoc" "\ Check the style and spelling of the current buffer's comments. Calls `checkdoc-comments' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-comments' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-ispell-defun "checkdoc" "\ Check the style and spelling of the current defun with Ispell. Calls `checkdoc-defun' with spell-checking turned on. Prefix argument TAKE-NOTES is the same as for `checkdoc-defun' \(fn &optional TAKE-NOTES)" t nil) (autoload 'checkdoc-minor-mode "checkdoc" "\ Toggle Checkdoc minor mode, a mode for checking Lisp doc strings. With prefix ARG, turn Checkdoc minor mode on if ARG is positive, otherwise turn it off. In Checkdoc minor mode, the usual bindings for `eval-defun' which is bound to \\<checkdoc-minor-mode-map>\\[checkdoc-eval-defun] and `checkdoc-eval-current-buffer' are overridden to include checking of documentation strings. \\{checkdoc-minor-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (pre-write-encode-hz post-read-decode-hz encode-hz-buffer ;;;;;; encode-hz-region decode-hz-buffer decode-hz-region) "china-util" ;;;;;; "language/china-util.el" (19259 35404)) ;;; Generated autoloads from language/china-util.el (autoload 'decode-hz-region "china-util" "\ Decode HZ/ZW encoded text in the current region. Return the length of resulting text. \(fn BEG END)" t nil) (autoload 'decode-hz-buffer "china-util" "\ Decode HZ/ZW encoded text in the current buffer. \(fn)" t nil) (autoload 'encode-hz-region "china-util" "\ Encode the text in the current region to HZ. Return the length of resulting text. \(fn BEG END)" t nil) (autoload 'encode-hz-buffer "china-util" "\ Encode the text in the current buffer to HZ. \(fn)" t nil) (autoload 'post-read-decode-hz "china-util" "\ Not documented \(fn LEN)" nil nil) (autoload 'pre-write-encode-hz "china-util" "\ Not documented \(fn FROM TO)" nil nil) ;;;*** ;;;### (autoloads (command-history list-command-history repeat-matching-complex-command) ;;;;;; "chistory" "chistory.el" (19259 35404)) ;;; Generated autoloads from chistory.el (autoload 'repeat-matching-complex-command "chistory" "\ Edit and re-evaluate complex command with name matching PATTERN. Matching occurrences are displayed, most recent first, until you select a form for evaluation. If PATTERN is empty (or nil), every form in the command history is offered. The form is placed in the minibuffer for editing and the result is evaluated. \(fn &optional PATTERN)" t nil) (autoload 'list-command-history "chistory" "\ List history of commands typed to minibuffer. The number of commands listed is controlled by `list-command-history-max'. Calls value of `list-command-history-filter' (if non-nil) on each history element to judge if that element should be excluded from the list. The buffer is left in Command History mode. \(fn)" t nil) (autoload 'command-history "chistory" "\ Examine commands from `command-history' in a buffer. The number of commands listed is controlled by `list-command-history-max'. The command history is filtered by `list-command-history-filter' if non-nil. Use \\<command-history-map>\\[command-history-repeat] to repeat the command on the current line. Otherwise much like Emacs-Lisp Mode except that there is no self-insertion and digits provide prefix arguments. Tab does not indent. \\{command-history-map} This command always recompiles the Command History listing and runs the normal hook `command-history-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads nil "cl" "emacs-lisp/cl.el" (19259 35404)) ;;; Generated autoloads from emacs-lisp/cl.el (defvar custom-print-functions nil "\ This is a list of functions that format user objects for printing. Each function is called in turn with three arguments: the object, the stream, and the print level (currently ignored). If it is able to print the object it returns true; otherwise it returns nil and the printer proceeds to the next function on the list. This variable is not used at present, but it is defined in hopes that a future Emacs interpreter will be able to use it.") ;;;*** ;;;### (autoloads (common-lisp-indent-function) "cl-indent" "emacs-lisp/cl-indent.el" ;;;;;; (19259 35404)) ;;; Generated autoloads from emacs-lisp/cl-indent.el (autoload 'common-lisp-indent-function "cl-indent" "\ Function to indent the arguments of a Lisp function call. This is suitable for use as the value of the variable `lisp-indent-function'. INDENT-POINT is the point at which the indentation function is called, and STATE is the `parse-partial-sexp' state at that position. Browse the `lisp-indent' customize group for options affecting the behavior of this function. If the indentation point is in a call to a Lisp function, that function's common-lisp-indent-function property specifies how this function should indent it. Possible values for this property are: * defun, meaning indent according to `lisp-indent-defun-method'; i.e., like (4 &lambda &body), as explained below. * any other symbol, meaning a function to call. The function should take the arguments: PATH STATE INDENT-POINT SEXP-COLUMN NORMAL-INDENT. PATH is a list of integers describing the position of point in terms of list-structure with respect to the containing lists. For example, in ((a b c (d foo) f) g), foo has a path of (0 3 1). In other words, to reach foo take the 0th element of the outermost list, then the 3rd element of the next list, and finally the 1st element. STATE and INDENT-POINT are as in the arguments to `common-lisp-indent-function'. SEXP-COLUMN is the column of the open parenthesis of the innermost containing list. NORMAL-INDENT is the column the indentation point was originally in. This function should behave like `lisp-indent-259'. * an integer N, meaning indent the first N arguments like function arguments, and any further arguments like a body. This is equivalent to (4 4 ... &body). * a list. The list element in position M specifies how to indent the Mth function argument. If there are fewer elements than function arguments, the last list element applies to all remaining arguments. The accepted list elements are: * nil, meaning the default indentation. * an integer, specifying an explicit indentation. * &lambda. Indent the argument (which may be a list) by 4. * &rest. When used, this must be the penultimate element. The element after this one applies to all remaining arguments. * &body. This is equivalent to &rest lisp-body-indent, i.e., indent all remaining elements by `lisp-body-indent'. * &whole. This must be followed by nil, an integer, or a function symbol. This indentation is applied to the associated argument, and as a base indent for all remaining arguments. For example, an integer P means indent this argument by P, and all remaining arguments by P, plus the value specified by their associated list element. * a symbol. A function to call, with the 6 arguments specified above. * a list, with elements as described above. This applies when the associated function argument is itself a list. Each element of the list specifies how to indent the associated argument. For example, the function `case' has an indent property \(4 &rest (&whole 2 &rest 1)), meaning: * indent the first argument by 4. * arguments after the first should be lists, and there may be any number of them. The first list element has an offset of 2, all the rest have an offset of 2+1=3. \(fn INDENT-POINT STATE)" nil nil) ;;;*** ;;;### (autoloads (c-macro-expand) "cmacexp" "progmodes/cmacexp.el" ;;;;;; (19259 35404)) ;;; Generated autoloads from progmodes/cmacexp.el (autoload 'c-macro-expand "cmacexp" "\ Expand C macros in the region, using the C preprocessor. Normally display output in temp buffer, but prefix arg means replace the region with it. `c-macro-preprocessor' specifies the preprocessor to use. Tf the user option `c-macro-prompt-flag' is non-nil prompt for arguments to the preprocessor (e.g. `-DDEBUG -I ./include'), otherwise use `c-macro-cppflags'. Noninteractive args are START, END, SUBST. For use inside Lisp programs, see also `c-macro-expansion'. \(fn START END SUBST)" t nil) ;;;*** ;;;### (autoloads (run-scheme) "cmuscheme" "cmuscheme.el" (19259 ;;;;;; 35404)) ;;; Generated autoloads from cmuscheme.el (autoload 'run-scheme "cmuscheme" "\ Run an inferior Scheme process, input and output via buffer `*scheme*'. If there is a process already running in `*scheme*', switch to that buffer. With argument, allows you to edit the command line (default is value of `scheme-program-name'). If the file `~/.emacs_SCHEMENAME' or `~/.emacs.d/init_SCHEMENAME.scm' exists, it is given as initial input. Note that this may lose due to a timing error if the Scheme processor discards input when it starts up. Runs the hook `inferior-scheme-mode-hook' (after the `comint-mode-hook' is run). \(Type \\[describe-mode] in the process buffer for a list of commands.) \(fn CMD)" t nil) (add-hook 'same-window-buffer-names (purecopy "*scheme*")) ;;;*** ;;;### (autoloads (comint-redirect-results-list-from-process comint-redirect-results-list ;;;;;; comint-redirect-send-command-to-process comint-redirect-send-command ;;;;;; comint-run make-comint make-comint-in-buffer) "comint" "comint.el" ;;;;;; (19259 35405)) ;;; Generated autoloads from comint.el (defvar comint-output-filter-functions '(comint-postoutput-scroll-to-bottom comint-watch-for-password-prompt) "\ Functions to call after output is inserted into the buffer. One possible function is `comint-postoutput-scroll-to-bottom'. These functions get one argument, a string containing the text as originally inserted. Note that this might not be the same as the buffer contents between `comint-last-output-start' and the buffer's `process-mark', if other filter functions have already modified the buffer. See also `comint-preoutput-filter-functions'. You can use `add-hook' to add functions to this list either globally or locally.") (define-obsolete-variable-alias 'comint-use-prompt-regexp-instead-of-fields 'comint-use-prompt-regexp "22.1") (autoload 'make-comint-in-buffer "comint" "\ Make a Comint process NAME in BUFFER, running PROGRAM. If BUFFER is nil, it defaults to NAME surrounded by `*'s. PROGRAM should be either a string denoting an executable program to create via `start-file-process', or a cons pair of the form (HOST . SERVICE) denoting a TCP connection to be opened via `open-network-stream'. If there is already a running process in that buffer, it is not restarted. Optional fourth arg STARTFILE is the name of a file, whose contents are sent to the process as its initial input. If PROGRAM is a string, any more args are arguments to PROGRAM. \(fn NAME BUFFER PROGRAM &optional STARTFILE &rest SWITCHES)" nil nil) (autoload 'make-comint "comint" "\ Make a Comint process NAME in a buffer, running PROGRAM. The name of the buffer is made by surrounding NAME with `*'s. PROGRAM should be either a string denoting an executable program to create via `start-file-process', or a cons pair of the form (HOST . SERVICE) denoting a TCP connection to be opened via `open-network-stream'. If there is already a running process in that buffer, it is not restarted. Optional third arg STARTFILE is the name of a file, whose contents are sent to the process as its initial input. If PROGRAM is a string, any more args are arguments to PROGRAM. \(fn NAME PROGRAM &optional STARTFILE &rest SWITCHES)" nil nil) (autoload 'comint-run "comint" "\ Run PROGRAM in a Comint buffer and switch to it. The buffer name is made by surrounding the file name of PROGRAM with `*'s. The file name is used to make a symbol name, such as `comint-sh-hook', and any hooks on this symbol are run in the buffer. See `make-comint' and `comint-exec'. \(fn PROGRAM)" t nil) (defvar comint-file-name-prefix (purecopy "") "\ Prefix prepended to absolute file names taken from process input. This is used by Comint's and shell's completion functions, and by shell's directory tracking functions.") (autoload 'comint-redirect-send-command "comint" "\ Send COMMAND to process in current buffer, with output to OUTPUT-BUFFER. With prefix arg ECHO, echo output in process buffer. If NO-DISPLAY is non-nil, do not show the output buffer. \(fn COMMAND OUTPUT-BUFFER ECHO &optional NO-DISPLAY)" t nil) (autoload 'comint-redirect-send-command-to-process "comint" "\ Send COMMAND to PROCESS, with output to OUTPUT-BUFFER. With prefix arg, echo output in process buffer. If NO-DISPLAY is non-nil, do not show the output buffer. \(fn COMMAND OUTPUT-BUFFER PROCESS ECHO &optional NO-DISPLAY)" t nil) (autoload 'comint-redirect-results-list "comint" "\ Send COMMAND to current process. Return a list of expressions in the output which match REGEXP. REGEXP-GROUP is the regular expression group in REGEXP to use. \(fn COMMAND REGEXP REGEXP-GROUP)" nil nil) (autoload 'comint-redirect-results-list-from-process "comint" "\ Send COMMAND to PROCESS. Return a list of expressions in the output which match REGEXP. REGEXP-GROUP is the regular expression group in REGEXP to use. \(fn PROCESS COMMAND REGEXP REGEXP-GROUP)" nil nil) ;;;*** ;;;### (autoloads (compare-windows) "compare-w" "compare-w.el" (19259 ;;;;;; 35405)) ;;; Generated autoloads from compare-w.el (autoload 'compare-windows "compare-w" "\ Compare text in current window with text in next window. Compares the text starting at point in each window, moving over text in each one as far as they match. This command pushes the mark in each window at the prior location of point in that window. If both windows display the same buffer, the mark is pushed twice in that buffer: first in the other window, then in the selected window. A prefix arg means reverse the value of variable `compare-ignore-whitespace'. If `compare-ignore-whitespace' is nil, then a prefix arg means ignore changes in whitespace. If `compare-ignore-whitespace' is non-nil, then a prefix arg means don't ignore changes in whitespace. The variable `compare-windows-whitespace' controls how whitespace is skipped. If `compare-ignore-case' is non-nil, changes in case are also ignored. If `compare-windows-sync' is non-nil, then successive calls of this command work in interlaced mode: on first call it advances points to the next difference, on second call it synchronizes points by skipping the difference, on third call it again advances points to the next difference and so on. \(fn IGNORE-WHITESPACE)" t nil) ;;;*** ;;;### (autoloads (compilation-next-error-function compilation-minor-mode ;;;;;; compilation-shell-minor-mode compilation-mode compilation-start ;;;;;; compile compilation-disable-input compile-command compilation-search-path ;;;;;; compilation-ask-about-save compilation-window-height compilation-start-hook ;;;;;; compilation-mode-hook) "compile" "progmodes/compile.el" (19259 ;;;;;; 35406)) ;;; Generated autoloads from progmodes/compile.el (defvar compilation-mode-hook nil "\ List of hook functions run by `compilation-mode' (see `run-mode-hooks').") (custom-autoload 'compilation-mode-hook "compile" t) (defvar compilation-start-hook nil "\ List of hook functions run by `compilation-start' on the compilation process. \(See `run-hook-with-args'). If you use \"omake -P\" and do not want \\[save-buffers-kill-terminal] to ask whether you want the compilation to be killed, you can use this hook: (add-hook 'compilation-start-hook (lambda (process) (set-process-query-on-exit-flag process nil)) nil t)") (custom-autoload 'compilation-start-hook "compile" t) (defvar compilation-window-height nil "\ Number of lines in a compilation window. If nil, use Emacs default.") (custom-autoload 'compilation-window-height "compile" t) (defvar compilation-process-setup-function nil "\ *Function to call to customize the compilation process. This function is called immediately before the compilation process is started. It can be used to set any variables or functions that are used while processing the output of the compilation process. The function is called with variables `compilation-buffer' and `compilation-window' bound to the compilation buffer and window, respectively.") (defvar compilation-buffer-name-function nil "\ Function to compute the name of a compilation buffer. The function receives one argument, the name of the major mode of the compilation buffer. It should return a string. If nil, compute the name with `(concat \"*\" (downcase major-mode) \"*\")'.") (defvar compilation-finish-function nil "\ Function to call when a compilation process finishes. It is called with two arguments: the compilation buffer, and a string describing how the process finished.") (defvar compilation-finish-functions nil "\ Functions to call when a compilation process finishes. Each function is called with two arguments: the compilation buffer, and a string describing how the process finished.") (put 'compilation-directory 'safe-local-variable 'stringp) (defvar compilation-ask-about-save t "\ Non-nil means \\[compile] asks which buffers to save before compiling. Otherwise, it saves all modified buffers without asking.") (custom-autoload 'compilation-ask-about-save "compile" t) (defvar compilation-search-path '(nil) "\ List of directories to search for source files named in error messages. Elements should be directory names, not file names of directories. The value nil as an element means to try the default directory.") (custom-autoload 'compilation-search-path "compile" t) (defvar compile-command (purecopy "make -k ") "\ Last shell command used to do a compilation; default for next compilation. Sometimes it is useful for files to supply local values for this variable. You might also use mode hooks to specify it in certain modes, like this: (add-hook 'c-mode-hook (lambda () (unless (or (file-exists-p \"makefile\") (file-exists-p \"Makefile\")) (set (make-local-variable 'compile-command) (concat \"make -k \" (file-name-sans-extension buffer-file-name))))))") (custom-autoload 'compile-command "compile" t) (put 'compile-command 'safe-local-variable 'stringp) (defvar compilation-disable-input nil "\ If non-nil, send end-of-file as compilation process input. This only affects platforms that support asynchronous processes (see `start-process'); synchronous compilation processes never accept input.") (custom-autoload 'compilation-disable-input "compile" t) (autoload 'compile "compile" "\ Compile the program including the current buffer. Default: run `make'. Runs COMMAND, a shell command, in a separate process asynchronously with output going to the buffer `*compilation*'. You can then use the command \\[next-error] to find the next error message and move to the source code that caused it. If optional second arg COMINT is t the buffer will be in Comint mode with `compilation-shell-minor-mode'. Interactively, prompts for the command if `compilation-read-command' is non-nil; otherwise uses `compile-command'. With prefix arg, always prompts. Additionally, with universal prefix arg, compilation buffer will be in comint mode, i.e. interactive. To run more than one compilation at once, start one then rename the `*compilation*' buffer to some other name with \\[rename-buffer]. Then _switch buffers_ and start the new compilation. It will create a new `*compilation*' buffer. On most systems, termination of the main compilation process kills its subprocesses. The name used for the buffer is actually whatever is returned by the function in `compilation-buffer-name-function', so you can set that to a function that generates a unique name. \(fn COMMAND &optional COMINT)" t nil) (autoload 'compilation-start "compile" "\ Run compilation command COMMAND (low level interface). If COMMAND starts with a cd command, that becomes the `default-directory'. The rest of the arguments are optional; for them, nil means use the default. MODE is the major mode to set in the compilation buffer. Mode may also be t meaning use `compilation-shell-minor-mode' under `comint-mode'. If NAME-FUNCTION is non-nil, call it with one argument (the mode name) to determine the buffer name. Otherwise, the default is to reuses the current buffer if it has the proper major mode, else use or create a buffer with name based on the major mode. If HIGHLIGHT-REGEXP is non-nil, `next-error' will temporarily highlight the matching section of the visited source line; the default is to use the global value of `compilation-highlight-regexp'. Returns the compilation buffer created. \(fn COMMAND &optional MODE NAME-FUNCTION HIGHLIGHT-REGEXP)" nil nil) (autoload 'compilation-mode "compile" "\ Major mode for compilation log buffers. \\<compilation-mode-map>To visit the source for a line-numbered error, move point to the error message line and type \\[compile-goto-error]. To kill the compilation, type \\[kill-compilation]. Runs `compilation-mode-hook' with `run-mode-hooks' (which see). \\{compilation-mode-map} \(fn &optional NAME-OF-MODE)" t nil) (autoload 'compilation-shell-minor-mode "compile" "\ Toggle compilation shell minor mode. With arg, turn compilation mode on if and only if arg is positive. In this minor mode, all the error-parsing commands of the Compilation major mode are available but bound to keys that don't collide with Shell mode. See `compilation-mode'. Turning the mode on runs the normal hook `compilation-shell-minor-mode-hook'. \(fn &optional ARG)" t nil) (autoload 'compilation-minor-mode "compile" "\ Toggle compilation minor mode. With arg, turn compilation mode on if and only if arg is positive. In this minor mode, all the error-parsing commands of the Compilation major mode are available. See `compilation-mode'. Turning the mode on runs the normal hook `compilation-minor-mode-hook'. \(fn &optional ARG)" t nil) (autoload 'compilation-next-error-function "compile" "\ Advance to the next error message and visit the file where the error was. This is the value of `next-error-function' in Compilation buffers. \(fn N &optional RESET)" t nil) (add-to-list 'auto-mode-alist (cons (purecopy "\\.gcov\\'") 'compilation-mode)) ;;;*** ;;;### (autoloads (partial-completion-mode) "complete" "complete.el" ;;;;;; (19259 35406)) ;;; Generated autoloads from complete.el (defvar partial-completion-mode nil "\ Non-nil if Partial-Completion mode is enabled. See the command `partial-completion-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `partial-completion-mode'.") (custom-autoload 'partial-completion-mode "complete" nil) (autoload 'partial-completion-mode "complete" "\ Toggle Partial Completion mode. With prefix ARG, turn Partial Completion mode on if ARG is positive. When Partial Completion mode is enabled, TAB (or M-TAB if `PC-meta-flag' is nil) is enhanced so that if some string is divided into words and each word is delimited by a character in `PC-word-delimiters', partial words are completed as much as possible and `*' characters are treated likewise in file names. For example, M-x p-c-m expands to M-x partial-completion-mode since no other command begins with that sequence of characters, and \\[find-file] f_b.c TAB might complete to foo_bar.c if that file existed and no other file in that directory begins with that sequence of characters. Unless `PC-disable-includes' is non-nil, the `<...>' sequence is interpreted specially in \\[find-file]. For example, \\[find-file] <sys/time.h> RET finds the file `/usr/include/sys/time.h'. See also the variable `PC-include-file-path'. Partial Completion mode extends the meaning of `completion-auto-help' (which see), so that if it is neither nil nor t, Emacs shows the `*Completions*' buffer only on the second attempt to complete. That is, if TAB finds nothing to complete, the first TAB just says \"Next char not unique\" and the second TAB brings up the `*Completions*' buffer. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (dynamic-completion-mode) "completion" "completion.el" ;;;;;; (19259 35406)) ;;; Generated autoloads from completion.el (defvar dynamic-completion-mode nil "\ Non-nil if Dynamic-Completion mode is enabled. See the command `dynamic-completion-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `dynamic-completion-mode'.") (custom-autoload 'dynamic-completion-mode "completion" nil) (autoload 'dynamic-completion-mode "completion" "\ Enable dynamic word-completion. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (conf-xdefaults-mode conf-ppd-mode conf-colon-mode ;;;;;; conf-space-keywords conf-space-mode conf-javaprop-mode conf-windows-mode ;;;;;; conf-unix-mode conf-mode) "conf-mode" "textmodes/conf-mode.el" ;;;;;; (19259 35406)) ;;; Generated autoloads from textmodes/conf-mode.el (autoload 'conf-mode "conf-mode" "\ Mode for Unix and Windows Conf files and Java properties. Most conf files know only three kinds of constructs: parameter assignments optionally grouped into sections and comments. Yet there is a great range of variation in the exact syntax of conf files. See below for various wrapper commands that set up the details for some of the most widespread variants. This mode sets up font locking, outline, imenu and it provides alignment support through `conf-align-assignments'. If strings come out wrong, try `conf-quote-normal'. Some files allow continuation lines, either with a backslash at the end of line, or by indenting the next line (further). These constructs cannot currently be recognized. Because of this great variety of nuances, which are often not even clearly specified, please don't expect it to get every file quite right. Patches that clearly identify some special case, without breaking the general ones, are welcome. If instead you start this mode with the generic `conf-mode' command, it will parse the buffer. It will generally well identify the first four cases listed below. If the buffer doesn't have enough contents to decide, this is identical to `conf-windows-mode' on Windows, elsewhere to `conf-unix-mode'. See also `conf-space-mode', `conf-colon-mode', `conf-javaprop-mode', `conf-ppd-mode' and `conf-xdefaults-mode'. \\{conf-mode-map} \(fn)" t nil) (autoload 'conf-unix-mode "conf-mode" "\ Conf Mode starter for Unix style Conf files. Comments start with `#'. For details see `conf-mode'. Example: # Conf mode font-locks this right on Unix and with \\[conf-unix-mode] \[Desktop Entry] Encoding=UTF-8 Name=The GIMP Name[ca]=El GIMP Name[cs]=GIMP \(fn)" t nil) (autoload 'conf-windows-mode "conf-mode" "\ Conf Mode starter for Windows style Conf files. Comments start with `;'. For details see `conf-mode'. Example: ; Conf mode font-locks this right on Windows and with \\[conf-windows-mode] \[ExtShellFolderViews] Default={5984FFE0-28D4-11CF-AE66-08002B2E1262} {5984FFE0-28D4-11CF-AE66-08002B2E1262}={5984FFE0-28D4-11CF-AE66-08002B2E1262} \[{5984FFE0-28D4-11CF-AE66-08002B2E1262}] PersistMoniker=file://Folder.htt \(fn)" t nil) (autoload 'conf-javaprop-mode "conf-mode" "\ Conf Mode starter for Java properties files. Comments start with `#' but are also recognized with `//' or between `/*' and `*/'. For details see `conf-mode'. Example: # Conf mode font-locks this right with \\[conf-javaprop-mode] (Java properties) // another kind of comment /* yet another */ name:value name=value name value x.1 = x.2.y.1.z.1 = x.2.y.1.z.2.zz = \(fn)" t nil) (autoload 'conf-space-mode "conf-mode" "\ Conf Mode starter for space separated conf files. \"Assignments\" are with ` '. Keywords before the parameters are recognized according to the variable `conf-space-keywords-alist'. Alternatively, you can specify a value for the file local variable `conf-space-keywords'. Use the function `conf-space-keywords' if you want to specify keywords in an interactive fashion instead. For details see `conf-mode'. Example: # Conf mode font-locks this right with \\[conf-space-mode] (space separated) image/jpeg jpeg jpg jpe image/png png image/tiff tiff tif # Or with keywords (from a recognized file name): class desktop # Standard multimedia devices add /dev/audio desktop add /dev/mixer desktop \(fn)" t nil) (autoload 'conf-space-keywords "conf-mode" "\ Enter Conf Space mode using regexp KEYWORDS to match the keywords. See `conf-space-mode'. \(fn KEYWORDS)" t nil) (autoload 'conf-colon-mode "conf-mode" "\ Conf Mode starter for Colon files. \"Assignments\" are with `:'. For details see `conf-mode'. Example: # Conf mode font-locks this right with \\[conf-colon-mode] (colon) <Multi_key> <exclam> <exclam> : \"\\241\" exclamdown <Multi_key> <c> <slash> : \"\\242\" cent \(fn)" t nil) (autoload 'conf-ppd-mode "conf-mode" "\ Conf Mode starter for Adobe/CUPS PPD files. Comments start with `*%' and \"assignments\" are with `:'. For details see `conf-mode'. Example: *% Conf mode font-locks this right with \\[conf-ppd-mode] (PPD) *DefaultTransfer: Null *Transfer Null.Inverse: \"{ 1 exch sub }\" \(fn)" t nil) (autoload 'conf-xdefaults-mode "conf-mode" "\ Conf Mode starter for Xdefaults files. Comments start with `!' and \"assignments\" are with `:'. For details see `conf-mode'. Example: ! Conf mode font-locks this right with \\[conf-xdefaults-mode] (.Xdefaults) *background: gray99 *foreground: black \(fn)" t nil) ;;;*** ;;;### (autoloads (shuffle-vector cookie-snarf cookie-insert cookie) ;;;;;; "cookie1" "play/cookie1.el" (19259 35407)) ;;; Generated autoloads from play/cookie1.el (autoload 'cookie "cookie1" "\ Return a random phrase from PHRASE-FILE. When the phrase file is read in, display STARTMSG at the beginning of load, ENDMSG at the end. \(fn PHRASE-FILE STARTMSG ENDMSG)" nil nil) (autoload 'cookie-insert "cookie1" "\ Insert random phrases from PHRASE-FILE; COUNT of them. When the phrase file is read in, display STARTMSG at the beginning of load, ENDMSG at the end. \(fn PHRASE-FILE &optional COUNT STARTMSG ENDMSG)" nil nil) (autoload 'cookie-snarf "cookie1" "\ Reads in the PHRASE-FILE, returns it as a vector of strings. Emit STARTMSG and ENDMSG before and after. Caches the result; second and subsequent calls on the same file won't go to disk. \(fn PHRASE-FILE STARTMSG ENDMSG)" nil nil) (autoload 'shuffle-vector "cookie1" "\ Randomly permute the elements of VECTOR (all permutations equally likely). \(fn VECTOR)" nil nil) ;;;*** ;;;### (autoloads (copyright-update-directory copyright copyright-fix-years ;;;;;; copyright-update) "copyright" "emacs-lisp/copyright.el" (19259 ;;;;;; 35407)) ;;; Generated autoloads from emacs-lisp/copyright.el (autoload 'copyright-update "copyright" "\ Update copyright notice to indicate the current year. With prefix ARG, replace the years in the notice rather than adding the current year after them. If necessary, and `copyright-current-gpl-version' is set, any copying permissions following the copyright are updated as well. If non-nil, INTERACTIVEP tells the function to behave as when it's called interactively. \(fn &optional ARG INTERACTIVEP)" t nil) (autoload 'copyright-fix-years "copyright" "\ Convert 2 digit years to 4 digit years. Uses heuristic: year >= 50 means 19xx, < 50 means 20xx. \(fn)" t nil) (autoload 'copyright "copyright" "\ Insert a copyright by $ORGANIZATION notice at cursor. \(fn &optional STR ARG)" t nil) (autoload 'copyright-update-directory "copyright" "\ Update copyright notice for all files in DIRECTORY matching MATCH. \(fn DIRECTORY MATCH)" t nil) ;;;*** ;;;### (autoloads (cperl-perldoc-at-point cperl-perldoc cperl-mode) ;;;;;; "cperl-mode" "progmodes/cperl-mode.el" (19259 35407)) ;;; Generated autoloads from progmodes/cperl-mode.el (put 'cperl-indent-level 'safe-local-variable 'integerp) (put 'cperl-brace-offset 'safe-local-variable 'integerp) (put 'cperl-continued-brace-offset 'safe-local-variable 'integerp) (put 'cperl-label-offset 'safe-local-variable 'integerp) (put 'cperl-continued-statement-offset 'safe-local-variable 'integerp) (put 'cperl-extra-newline-before-brace 'safe-local-variable 'booleanp) (put 'cperl-merge-trailing-else 'safe-local-variable 'booleanp) (autoload 'cperl-mode "cperl-mode" "\ Major mode for editing Perl code. Expression and list commands understand all C brackets. Tab indents for Perl code. Paragraphs are separated by blank lines only. Delete converts tabs to spaces as it moves back. Various characters in Perl almost always come in pairs: {}, (), [], sometimes <>. When the user types the first, she gets the second as well, with optional special formatting done on {}. (Disabled by default.) You can always quote (with \\[quoted-insert]) the left \"paren\" to avoid the expansion. The processing of < is special, since most the time you mean \"less\". CPerl mode tries to guess whether you want to type pair <>, and inserts is if it appropriate. You can set `cperl-electric-parens-string' to the string that contains the parenths from the above list you want to be electrical. Electricity of parenths is controlled by `cperl-electric-parens'. You may also set `cperl-electric-parens-mark' to have electric parens look for active mark and \"embrace\" a region if possible.' CPerl mode provides expansion of the Perl control constructs: if, else, elsif, unless, while, until, continue, do, for, foreach, formy and foreachmy. and POD directives (Disabled by default, see `cperl-electric-keywords'.) The user types the keyword immediately followed by a space, which causes the construct to be expanded, and the point is positioned where she is most likely to want to be. eg. when the user types a space following \"if\" the following appears in the buffer: if () { or if () } { } and the cursor is between the parentheses. The user can then type some boolean expression within the parens. Having done that, typing \\[cperl-linefeed] places you - appropriately indented - on a new line between the braces (if you typed \\[cperl-linefeed] in a POD directive line, then appropriate number of new lines is inserted). If CPerl decides that you want to insert \"English\" style construct like bite if angry; it will not do any expansion. See also help on variable `cperl-extra-newline-before-brace'. (Note that one can switch the help message on expansion by setting `cperl-message-electric-keyword' to nil.) \\[cperl-linefeed] is a convenience replacement for typing carriage return. It places you in the next line with proper indentation, or if you type it inside the inline block of control construct, like foreach (@lines) {print; print} and you are on a boundary of a statement inside braces, it will transform the construct into a multiline and will place you into an appropriately indented blank line. If you need a usual `newline-and-indent' behavior, it is on \\[newline-and-indent], see documentation on `cperl-electric-linefeed'. Use \\[cperl-invert-if-unless] to change a construction of the form if (A) { B } into B if A; \\{cperl-mode-map} Setting the variable `cperl-font-lock' to t switches on font-lock-mode \(even with older Emacsen), `cperl-electric-lbrace-space' to t switches on electric space between $ and {, `cperl-electric-parens-string' is the string that contains parentheses that should be electric in CPerl \(see also `cperl-electric-parens-mark' and `cperl-electric-parens'), setting `cperl-electric-keywords' enables electric expansion of control structures in CPerl. `cperl-electric-linefeed' governs which one of two linefeed behavior is preferable. You can enable all these options simultaneously (recommended mode of use) by setting `cperl-hairy' to t. In this case you can switch separate options off by setting them to `null'. Note that one may undo the extra whitespace inserted by semis and braces in `auto-newline'-mode by consequent \\[cperl-electric-backspace]. If your site has perl5 documentation in info format, you can use commands \\[cperl-info-on-current-command] and \\[cperl-info-on-command] to access it. These keys run commands `cperl-info-on-current-command' and `cperl-info-on-command', which one is which is controlled by variable `cperl-info-on-command-no-prompt' and `cperl-clobber-lisp-bindings' \(in turn affected by `cperl-hairy'). Even if you have no info-format documentation, short one-liner-style help is available on \\[cperl-get-help], and one can run perldoc or man via menu. It is possible to show this help automatically after some idle time. This is regulated by variable `cperl-lazy-help-time'. Default with `cperl-hairy' (if the value of `cperl-lazy-help-time' is nil) is 5 secs idle time . It is also possible to switch this on/off from the menu, or via \\[cperl-toggle-autohelp]. Requires `run-with-idle-timer'. Use \\[cperl-lineup] to vertically lineup some construction - put the beginning of the region at the start of construction, and make region span the needed amount of lines. Variables `cperl-pod-here-scan', `cperl-pod-here-fontify', `cperl-pod-face', `cperl-pod-head-face' control processing of POD and here-docs sections. With capable Emaxen results of scan are used for indentation too, otherwise they are used for highlighting only. Variables controlling indentation style: `cperl-tab-always-indent' Non-nil means TAB in CPerl mode should always reindent the current line, regardless of where in the line point is when the TAB command is used. `cperl-indent-left-aligned-comments' Non-nil means that the comment starting in leftmost column should indent. `cperl-auto-newline' Non-nil means automatically newline before and after braces, and after colons and semicolons, inserted in Perl code. The following \\[cperl-electric-backspace] will remove the inserted whitespace. Insertion after colons requires both this variable and `cperl-auto-newline-after-colon' set. `cperl-auto-newline-after-colon' Non-nil means automatically newline even after colons. Subject to `cperl-auto-newline' setting. `cperl-indent-level' Indentation of Perl statements within surrounding block. The surrounding block's indentation is the indentation of the line on which the open-brace appears. `cperl-continued-statement-offset' Extra indentation given to a substatement, such as the then-clause of an if, or body of a while, or just a statement continuation. `cperl-continued-brace-offset' Extra indentation given to a brace that starts a substatement. This is in addition to `cperl-continued-statement-offset'. `cperl-brace-offset' Extra indentation for line if it starts with an open brace. `cperl-brace-imaginary-offset' An open brace following other text is treated as if it the line started this far to the right of the actual line indentation. `cperl-label-offset' Extra indentation for line that is a label. `cperl-min-label-indent' Minimal indentation for line that is a label. Settings for classic indent-styles: K&R BSD=C++ GNU PerlStyle=Whitesmith `cperl-indent-level' 5 4 2 4 `cperl-brace-offset' 0 0 0 0 `cperl-continued-brace-offset' -5 -4 0 0 `cperl-label-offset' -5 -4 -2 -4 `cperl-continued-statement-offset' 5 4 2 4 CPerl knows several indentation styles, and may bulk set the corresponding variables. Use \\[cperl-set-style] to do this. Use \\[cperl-set-style-back] to restore the memorized preexisting values \(both available from menu). See examples in `cperl-style-examples'. Part of the indentation style is how different parts of if/elsif/else statements are broken into lines; in CPerl, this is reflected on how templates for these constructs are created (controlled by `cperl-extra-newline-before-brace'), and how reflow-logic should treat \"continuation\" blocks of else/elsif/continue, controlled by the same variable, and by `cperl-extra-newline-before-brace-multiline', `cperl-merge-trailing-else', `cperl-indent-region-fix-constructs'. If `cperl-indent-level' is 0, the statement after opening brace in column 0 is indented on `cperl-brace-offset'+`cperl-continued-statement-offset'. Turning on CPerl mode calls the hooks in the variable `cperl-mode-hook' with no args. DO NOT FORGET to read micro-docs (available from `Perl' menu) or as help on variables `cperl-tips', `cperl-problems', `cperl-praise', `cperl-speed'. \(fn)" t nil) (autoload 'cperl-perldoc "cperl-mode" "\ Run `perldoc' on WORD. \(fn WORD)" t nil) (autoload 'cperl-perldoc-at-point "cperl-mode" "\ Run a `perldoc' on the word around point. \(fn)" t nil) ;;;*** ;;;### (autoloads (cpp-parse-edit cpp-highlight-buffer) "cpp" "progmodes/cpp.el" ;;;;;; (19259 35408)) ;;; Generated autoloads from progmodes/cpp.el (autoload 'cpp-highlight-buffer "cpp" "\ Highlight C code according to preprocessor conditionals. This command pops up a buffer which you should edit to specify what kind of highlighting to use, and the criteria for highlighting. A prefix arg suppresses display of that buffer. \(fn ARG)" t nil) (autoload 'cpp-parse-edit "cpp" "\ Edit display information for cpp conditionals. \(fn)" t nil) ;;;*** ;;;### (autoloads (crisp-mode crisp-mode) "crisp" "emulation/crisp.el" ;;;;;; (19259 35408)) ;;; Generated autoloads from emulation/crisp.el (defvar crisp-mode nil "\ Track status of CRiSP emulation mode. A value of nil means CRiSP mode is not enabled. A value of t indicates CRiSP mode is enabled. Setting this variable directly does not take effect; use either M-x customize or the function `crisp-mode'.") (custom-autoload 'crisp-mode "crisp" nil) (autoload 'crisp-mode "crisp" "\ Toggle CRiSP/Brief emulation minor mode. With ARG, turn CRiSP mode on if ARG is positive, off otherwise. \(fn &optional ARG)" t nil) (defalias 'brief-mode 'crisp-mode) ;;;*** ;;;### (autoloads (completing-read-multiple) "crm" "emacs-lisp/crm.el" ;;;;;; (19259 35408)) ;;; Generated autoloads from emacs-lisp/crm.el (autoload 'completing-read-multiple "crm" "\ Read multiple strings in the minibuffer, with completion. By using this functionality, a user may specify multiple strings at a single prompt, optionally using completion. Multiple strings are specified by separating each of the strings with a prespecified separator character. For example, if the separator character is a comma, the strings 'alice', 'bob', and 'eve' would be specified as 'alice,bob,eve'. The default value for the separator character is the value of `crm-default-separator' (comma). The separator character may be changed by modifying the value of `crm-separator'. Contiguous strings of non-separator-characters are referred to as 'elements'. In the aforementioned example, the elements are: 'alice', 'bob', and 'eve'. Completion is available on a per-element basis. For example, if the contents of the minibuffer are 'alice,bob,eve' and point is between 'l' and 'i', pressing TAB operates on the element 'alice'. The return value of this function is a list of the read strings. See the documentation for `completing-read' for details on the arguments: PROMPT, TABLE, PREDICATE, REQUIRE-MATCH, INITIAL-INPUT, HIST, DEF, and INHERIT-INPUT-METHOD. \(fn PROMPT TABLE &optional PREDICATE REQUIRE-MATCH INITIAL-INPUT HIST DEF INHERIT-INPUT-METHOD)" nil nil) ;;;*** ;;;### (autoloads (css-mode) "css-mode" "textmodes/css-mode.el" (19259 ;;;;;; 35408)) ;;; Generated autoloads from textmodes/css-mode.el (add-to-list 'auto-mode-alist (cons (purecopy "\\.css\\'") 'css-mode)) (autoload 'css-mode "css-mode" "\ Major mode to edit Cascading Style Sheets. \(fn)" t nil) ;;;*** ;;;### (autoloads (cua-selection-mode cua-mode) "cua-base" "emulation/cua-base.el" ;;;;;; (19259 35408)) ;;; Generated autoloads from emulation/cua-base.el (defvar cua-mode nil "\ Non-nil if Cua mode is enabled. See the command `cua-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `cua-mode'.") (custom-autoload 'cua-mode "cua-base" nil) (autoload 'cua-mode "cua-base" "\ Toggle CUA key-binding mode. When enabled, using shifted movement keys will activate the region (and highlight the region using `transient-mark-mode'), and typed text replaces the active selection. Also when enabled, you can use C-z, C-x, C-c, and C-v to undo, cut, copy, and paste in addition to the normal Emacs bindings. The C-x and C-c keys only do cut and copy when the region is active, so in most cases, they do not conflict with the normal function of these prefix keys. If you really need to perform a command which starts with one of the prefix keys even when the region is active, you have three options: - press the prefix key twice very quickly (within 0.2 seconds), - press the prefix key and the following key within 0.2 seconds, or - use the SHIFT key with the prefix key, i.e. C-S-x or C-S-c. You can customize `cua-enable-cua-keys' to completely disable the CUA bindings, or `cua-prefix-override-inhibit-delay' to change the prefix fallback behavior. CUA mode manages Transient Mark mode internally. Trying to disable Transient Mark mode while CUA mode is enabled does not work; if you only want to highlight the region when it is selected using a shifted movement key, set `cua-highlight-region-shift-only'. \(fn &optional ARG)" t nil) (autoload 'cua-selection-mode "cua-base" "\ Enable CUA selection mode without the C-z/C-x/C-c/C-v bindings. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (customize-menu-create custom-menu-create customize-save-customized ;;;;;; custom-save-all custom-file customize-browse custom-buffer-create-other-window ;;;;;; custom-buffer-create customize-apropos-groups customize-apropos-faces ;;;;;; customize-apropos-options customize-apropos customize-saved ;;;;;; customize-rogue customize-unsaved customize-face-other-window ;;;;;; customize-face customize-changed-options customize-option-other-window ;;;;;; customize-option customize-group-other-window customize-group ;;;;;; customize-mode customize customize-save-variable customize-set-variable ;;;;;; customize-set-value custom-menu-sort-alphabetically custom-buffer-sort-alphabetically ;;;;;; custom-browse-sort-alphabetically) "cus-edit" "cus-edit.el" ;;;;;; (19259 35408)) ;;; Generated autoloads from cus-edit.el (defvar custom-browse-sort-alphabetically nil "\ If non-nil, sort customization group alphabetically in `custom-browse'.") (custom-autoload 'custom-browse-sort-alphabetically "cus-edit" t) (defvar custom-buffer-sort-alphabetically nil "\ If non-nil, sort each customization group alphabetically in Custom buffer.") (custom-autoload 'custom-buffer-sort-alphabetically "cus-edit" t) (defvar custom-menu-sort-alphabetically nil "\ If non-nil, sort each customization group alphabetically in menus.") (custom-autoload 'custom-menu-sort-alphabetically "cus-edit" t) (add-hook 'same-window-regexps (purecopy "\\`\\*Customiz.*\\*\\'")) (autoload 'customize-set-value "cus-edit" "\ Set VARIABLE to VALUE, and return VALUE. VALUE is a Lisp object. If VARIABLE has a `variable-interactive' property, that is used as if it were the arg to `interactive' (which see) to interactively read the value. If VARIABLE has a `custom-type' property, it must be a widget and the `:prompt-value' property of that widget will be used for reading the value. If given a prefix (or a COMMENT argument), also prompt for a comment. \(fn VARIABLE VALUE &optional COMMENT)" t nil) (autoload 'customize-set-variable "cus-edit" "\ Set the default for VARIABLE to VALUE, and return VALUE. VALUE is a Lisp object. If VARIABLE has a `custom-set' property, that is used for setting VARIABLE, otherwise `set-default' is used. If VARIABLE has a `variable-interactive' property, that is used as if it were the arg to `interactive' (which see) to interactively read the value. If VARIABLE has a `custom-type' property, it must be a widget and the `:prompt-value' property of that widget will be used for reading the value. If given a prefix (or a COMMENT argument), also prompt for a comment. \(fn VARIABLE VALUE &optional COMMENT)" t nil) (autoload 'customize-save-variable "cus-edit" "\ Set the default for VARIABLE to VALUE, and save it for future sessions. Return VALUE. If VARIABLE has a `custom-set' property, that is used for setting VARIABLE, otherwise `set-default' is used. If VARIABLE has a `variable-interactive' property, that is used as if it were the arg to `interactive' (which see) to interactively read the value. If VARIABLE has a `custom-type' property, it must be a widget and the `:prompt-value' property of that widget will be used for reading the value. If given a prefix (or a COMMENT argument), also prompt for a comment. \(fn VARIABLE VALUE &optional COMMENT)" t nil) (autoload 'customize "cus-edit" "\ Select a customization buffer which you can use to set user options. User options are structured into \"groups\". Initially the top-level group `Emacs' and its immediate subgroups are shown; the contents of those subgroups are initially hidden. \(fn)" t nil) (autoload 'customize-mode "cus-edit" "\ Customize options related to the current major mode. If a prefix \\[universal-argument] was given (or if the current major mode has no known group), then prompt for the MODE to customize. \(fn MODE)" t nil) (autoload 'customize-group "cus-edit" "\ Customize GROUP, which must be a customization group. \(fn &optional GROUP)" t nil) (autoload 'customize-group-other-window "cus-edit" "\ Customize GROUP, which must be a customization group, in another window. \(fn &optional GROUP)" t nil) (defalias 'customize-variable 'customize-option) (autoload 'customize-option "cus-edit" "\ Customize SYMBOL, which must be a user option variable. \(fn SYMBOL)" t nil) (defalias 'customize-variable-other-window 'customize-option-other-window) (autoload 'customize-option-other-window "cus-edit" "\ Customize SYMBOL, which must be a user option variable. Show the buffer in another window, but don't select it. \(fn SYMBOL)" t nil) (defvar customize-package-emacs-version-alist nil "\ Alist mapping versions of a package to Emacs versions. We use this for packages that have their own names, but are released as part of Emacs itself. Each elements looks like this: (PACKAGE (PVERSION . EVERSION)...) Here PACKAGE is the name of a package, as a symbol. After PACKAGE come one or more elements, each associating a package version PVERSION with the first Emacs version EVERSION in which it (or a subsequent version of PACKAGE) was first released. Both PVERSION and EVERSION are strings. PVERSION should be a string that this package used in the :package-version keyword for `defcustom', `defgroup', and `defface'. For example, the MH-E package updates this alist as follows: (add-to-list 'customize-package-emacs-version-alist '(MH-E (\"6.0\" . \"22.1\") (\"6.1\" . \"22.1\") (\"7.0\" . \"22.1\") (\"7.1\" . \"22.1\") (\"7.2\" . \"22.1\") (\"7.3\" . \"22.1\") (\"7.4\" . \"22.1\") (\"8.0\" . \"22.1\"))) The value of PACKAGE needs to be unique and it needs to match the PACKAGE value appearing in the :package-version keyword. Since the user might see the value in a error message, a good choice is the official name of the package, such as MH-E or Gnus.") (defalias 'customize-changed 'customize-changed-options) (autoload 'customize-changed-options "cus-edit" "\ Customize all settings whose meanings have changed in Emacs itself. This includes new user option variables and faces, and new customization groups, as well as older options and faces whose meanings or default values have changed since the previous major Emacs release. With argument SINCE-VERSION (a string), customize all settings that were added or redefined since that version. \(fn &optional SINCE-VERSION)" t nil) (autoload 'customize-face "cus-edit" "\ Customize FACE, which should be a face name or nil. If FACE is nil, customize all faces. If FACE is actually a face-alias, customize the face it is aliased to. Interactively, when point is on text which has a face specified, suggest to customize that face, if it's customizable. \(fn &optional FACE)" t nil) (autoload 'customize-face-other-window "cus-edit" "\ Show customization buffer for face FACE in other window. If FACE is actually a face-alias, customize the face it is aliased to. Interactively, when point is on text which has a face specified, suggest to customize that face, if it's customizable. \(fn &optional FACE)" t nil) (autoload 'customize-unsaved "cus-edit" "\ Customize all user options set in this session but not saved. \(fn)" t nil) (autoload 'customize-rogue "cus-edit" "\ Customize all user variables modified outside customize. \(fn)" t nil) (autoload 'customize-saved "cus-edit" "\ Customize all already saved user options. \(fn)" t nil) (autoload 'customize-apropos "cus-edit" "\ Customize all loaded options, faces and groups matching REGEXP. If ALL is `options', include only options. If ALL is `faces', include only faces. If ALL is `groups', include only groups. If ALL is t (interactively, with prefix arg), include variables that are not customizable options, as well as faces and groups \(but we recommend using `apropos-variable' instead). \(fn REGEXP &optional ALL)" t nil) (autoload 'customize-apropos-options "cus-edit" "\ Customize all loaded customizable options matching REGEXP. With prefix ARG, include variables that are not customizable options \(but it is better to use `apropos-variable' if you want to find those). \(fn REGEXP &optional ARG)" t nil) (autoload 'customize-apropos-faces "cus-edit" "\ Customize all loaded faces matching REGEXP. \(fn REGEXP)" t nil) (autoload 'customize-apropos-groups "cus-edit" "\ Customize all loaded groups matching REGEXP. \(fn REGEXP)" t nil) (autoload 'custom-buffer-create "cus-edit" "\ Create a buffer containing OPTIONS. Optional NAME is the name of the buffer. OPTIONS should be an alist of the form ((SYMBOL WIDGET)...), where SYMBOL is a customization option, and WIDGET is a widget for editing that option. \(fn OPTIONS &optional NAME DESCRIPTION)" nil nil) (autoload 'custom-buffer-create-other-window "cus-edit" "\ Create a buffer containing OPTIONS, and display it in another window. The result includes selecting that window. Optional NAME is the name of the buffer. OPTIONS should be an alist of the form ((SYMBOL WIDGET)...), where SYMBOL is a customization option, and WIDGET is a widget for editing that option. \(fn OPTIONS &optional NAME DESCRIPTION)" nil nil) (autoload 'customize-browse "cus-edit" "\ Create a tree browser for the customize hierarchy. \(fn &optional GROUP)" t nil) (defvar custom-file nil "\ File used for storing customization information. The default is nil, which means to use your init file as specified by `user-init-file'. If the value is not nil, it should be an absolute file name. You can set this option through Custom, if you carefully read the last paragraph below. However, usually it is simpler to write something like the following in your init file: \(setq custom-file \"~/.emacs-custom.el\") \(load custom-file) Note that both lines are necessary: the first line tells Custom to save all customizations in this file, but does not load it. When you change this variable outside Custom, look in the previous custom file (usually your init file) for the forms `(custom-set-variables ...)' and `(custom-set-faces ...)', and copy them (whichever ones you find) to the new custom file. This will preserve your existing customizations. If you save this option using Custom, Custom will write all currently saved customizations, including the new one for this option itself, into the file you specify, overwriting any `custom-set-variables' and `custom-set-faces' forms already present in that file. It will not delete any customizations from the old custom file. You should do that manually if that is what you want. You also have to put something like `(load \"CUSTOM-FILE\") in your init file, where CUSTOM-FILE is the actual name of the file. Otherwise, Emacs will not load the file when it starts up, and hence will not set `custom-file' to that file either.") (custom-autoload 'custom-file "cus-edit" t) (autoload 'custom-save-all "cus-edit" "\ Save all customizations in `custom-file'. \(fn)" nil nil) (autoload 'customize-save-customized "cus-edit" "\ Save all user options which have been set in this session. \(fn)" t nil) (autoload 'custom-menu-create "cus-edit" "\ Create menu for customization group SYMBOL. The menu is in a format applicable to `easy-menu-define'. \(fn SYMBOL)" nil nil) (autoload 'customize-menu-create "cus-edit" "\ Return a customize menu for customization group SYMBOL. If optional NAME is given, use that as the name of the menu. Otherwise the menu will be named `Customize'. The format is suitable for use with `easy-menu-define'. \(fn SYMBOL &optional NAME)" nil nil) ;;;*** ;;;### (autoloads (customize-create-theme) "cus-theme" "cus-theme.el" ;;;;;; (19259 35409)) ;;; Generated autoloads from cus-theme.el (autoload 'customize-create-theme "cus-theme" "\ Create a custom theme. \(fn)" t nil) ;;;*** ;;;### (autoloads (cvs-status-mode) "cvs-status" "cvs-status.el" ;;;;;; (19259 35409)) ;;; Generated autoloads from cvs-status.el (autoload 'cvs-status-mode "cvs-status" "\ Mode used for cvs status output. \(fn)" t nil) ;;;*** ;;;### (autoloads (global-cwarn-mode turn-on-cwarn-mode cwarn-mode) ;;;;;; "cwarn" "progmodes/cwarn.el" (19259 35409)) ;;; Generated autoloads from progmodes/cwarn.el (autoload 'cwarn-mode "cwarn" "\ Minor mode that highlights suspicious C and C++ constructions. Suspicious constructs are highlighted using `font-lock-warning-face'. Note, in addition to enabling this minor mode, the major mode must be included in the variable `cwarn-configuration'. By default C and C++ modes are included. With ARG, turn CWarn mode on if and only if arg is positive. \(fn &optional ARG)" t nil) (autoload 'turn-on-cwarn-mode "cwarn" "\ Turn on CWarn mode. This function is designed to be added to hooks, for example: (add-hook 'c-mode-hook 'turn-on-cwarn-mode) \(fn)" nil nil) (defvar global-cwarn-mode nil "\ Non-nil if Global-Cwarn mode is enabled. See the command `global-cwarn-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-cwarn-mode'.") (custom-autoload 'global-cwarn-mode "cwarn" nil) (autoload 'global-cwarn-mode "cwarn" "\ Toggle Cwarn mode in every possible buffer. With prefix ARG, turn Global-Cwarn mode on if and only if ARG is positive. Cwarn mode is enabled in all buffers where `turn-on-cwarn-mode-if-enabled' would do it. See `cwarn-mode' for more information on Cwarn mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (standard-display-cyrillic-translit cyrillic-encode-alternativnyj-char ;;;;;; cyrillic-encode-koi8-r-char) "cyril-util" "language/cyril-util.el" ;;;;;; (19259 35409)) ;;; Generated autoloads from language/cyril-util.el (autoload 'cyrillic-encode-koi8-r-char "cyril-util" "\ Return KOI8-R external character code of CHAR if appropriate. \(fn CHAR)" nil nil) (autoload 'cyrillic-encode-alternativnyj-char "cyril-util" "\ Return ALTERNATIVNYJ external character code of CHAR if appropriate. \(fn CHAR)" nil nil) (autoload 'standard-display-cyrillic-translit "cyril-util" "\ Display a cyrillic buffer using a transliteration. For readability, the table is slightly different from the one used for the input method `cyrillic-translit'. The argument is a string which specifies which language you are using; that affects the choice of transliterations slightly. Possible values are listed in `cyrillic-language-alist'. If the argument is t, we use the default cyrillic transliteration. If the argument is nil, we return the display table to its standard state. \(fn &optional CYRILLIC-LANGUAGE)" t nil) ;;;*** ;;;### (autoloads (dabbrev-expand dabbrev-completion) "dabbrev" "dabbrev.el" ;;;;;; (19259 35409)) ;;; Generated autoloads from dabbrev.el (put 'dabbrev-case-fold-search 'risky-local-variable t) (put 'dabbrev-case-replace 'risky-local-variable t) (define-key esc-map "/" 'dabbrev-expand) (define-key esc-map [?\C-/] 'dabbrev-completion) (autoload 'dabbrev-completion "dabbrev" "\ Completion on current word. Like \\[dabbrev-expand] but finds all expansions in the current buffer and presents suggestions for completion. With a prefix argument ARG, it searches all buffers accepted by the function pointed out by `dabbrev-friend-buffer-function' to find the completions. If the prefix argument is 16 (which comes from \\[prefix-argument] \\[prefix-argument]), then it searches *all* buffers. \(fn &optional ARG)" t nil) (autoload 'dabbrev-expand "dabbrev" "\ Expand previous word \"dynamically\". Expands to the most recent, preceding word for which this is a prefix. If no suitable preceding word is found, words following point are considered. If still no suitable word is found, then look in the buffers accepted by the function pointed out by variable `dabbrev-friend-buffer-function'. A positive prefix argument, N, says to take the Nth backward *distinct* possibility. A negative argument says search forward. If the cursor has not moved from the end of the previous expansion and no argument is given, replace the previously-made expansion with the next possible expansion not yet tried. The variable `dabbrev-backward-only' may be used to limit the direction of search to backward if set non-nil. See also `dabbrev-abbrev-char-regexp' and \\[dabbrev-completion]. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (data-debug-new-buffer) "data-debug" "cedet/data-debug.el" ;;;;;; (19259 35409)) ;;; Generated autoloads from cedet/data-debug.el (autoload 'data-debug-new-buffer "data-debug" "\ Create a new data-debug buffer with NAME. \(fn NAME)" nil nil) ;;;*** ;;;### (autoloads (dbus-handle-event) "dbus" "net/dbus.el" (19259 ;;;;;; 35410)) ;;; Generated autoloads from net/dbus.el (autoload 'dbus-handle-event "dbus" "\ Handle events from the D-Bus. EVENT is a D-Bus event, see `dbus-check-event'. HANDLER, being part of the event, is called with arguments ARGS. If the HANDLER returns an `dbus-error', it is propagated as return message. \(fn EVENT)" t nil) ;;;*** ;;;### (autoloads (dcl-mode) "dcl-mode" "progmodes/dcl-mode.el" (19259 ;;;;;; 35410)) ;;; Generated autoloads from progmodes/dcl-mode.el (autoload 'dcl-mode "dcl-mode" "\ Major mode for editing DCL-files. This mode indents command lines in blocks. (A block is commands between THEN-ELSE-ENDIF and between lines matching dcl-block-begin-regexp and dcl-block-end-regexp.) Labels are indented to a fixed position unless they begin or end a block. Whole-line comments (matching dcl-comment-line-regexp) are not indented. Data lines are not indented. Key bindings: \\{dcl-mode-map} Commands not usually bound to keys: \\[dcl-save-nondefault-options] Save changed options \\[dcl-save-all-options] Save all options \\[dcl-save-option] Save any option \\[dcl-save-mode] Save buffer mode Variables controlling indentation style and extra features: dcl-basic-offset Extra indentation within blocks. dcl-continuation-offset Extra indentation for continued lines. dcl-margin-offset Indentation for the first command line in a file or SUBROUTINE. dcl-margin-label-offset Indentation for a label. dcl-comment-line-regexp Lines matching this regexp will not be indented. dcl-block-begin-regexp dcl-block-end-regexp Regexps that match command lines that begin and end, respectively, a block of commmand lines that will be given extra indentation. Command lines between THEN-ELSE-ENDIF are always indented; these variables make it possible to define other places to indent. Set to nil to disable this feature. dcl-calc-command-indent-function Can be set to a function that customizes indentation for command lines. Two such functions are included in the package: dcl-calc-command-indent-multiple dcl-calc-command-indent-hang dcl-calc-cont-indent-function Can be set to a function that customizes indentation for continued lines. One such function is included in the package: dcl-calc-cont-indent-relative (set by default) dcl-tab-always-indent If t, pressing TAB always indents the current line. If nil, pressing TAB indents the current line if point is at the left margin. dcl-electric-characters Non-nil causes lines to be indented at once when a label, ELSE or ENDIF is typed. dcl-electric-reindent-regexps Use this variable and function dcl-electric-character to customize which words trigger electric indentation. dcl-tempo-comma dcl-tempo-left-paren dcl-tempo-right-paren These variables control the look of expanded templates. dcl-imenu-generic-expression Default value for imenu-generic-expression. The default includes SUBROUTINE labels in the main listing and sub-listings for other labels, CALL, GOTO and GOSUB statements. dcl-imenu-label-labels dcl-imenu-label-goto dcl-imenu-label-gosub dcl-imenu-label-call Change the text that is used as sub-listing labels in imenu. Loading this package calls the value of the variable `dcl-mode-load-hook' with no args, if that value is non-nil. Turning on DCL mode calls the value of the variable `dcl-mode-hook' with no args, if that value is non-nil. The following example uses the default values for all variables: $! This is a comment line that is not indented (it matches $! dcl-comment-line-regexp) $! Next follows the first command line. It is indented dcl-margin-offset. $ i = 1 $ ! Other comments are indented like command lines. $ ! A margin label indented dcl-margin-label-offset: $ label: $ if i.eq.1 $ then $ ! Lines between THEN-ELSE and ELSE-ENDIF are $ ! indented dcl-basic-offset $ loop1: ! This matches dcl-block-begin-regexp... $ ! ...so this line is indented dcl-basic-offset $ text = \"This \" + - ! is a continued line \"lined up with the command line\" $ type sys$input Data lines are not indented at all. $ endloop1: ! This matches dcl-block-end-regexp $ endif $ There is some minimal font-lock support (see vars `dcl-font-lock-defaults' and `dcl-font-lock-keywords'). \(fn)" t nil) ;;;*** ;;;### (autoloads (cancel-debug-on-entry debug-on-entry debug) "debug" ;;;;;; "emacs-lisp/debug.el" (19259 35410)) ;;; Generated autoloads from emacs-lisp/debug.el (setq debugger 'debug) (autoload 'debug "debug" "\ Enter debugger. To return, type \\<debugger-mode-map>`\\[debugger-continue]'. Arguments are mainly for use when this is called from the internals of the evaluator. You may call with no args, or you may pass nil as the first arg and any other args you like. In that case, the list of args after the first will be printed into the backtrace buffer. \(fn &rest DEBUGGER-ARGS)" t nil) (autoload 'debug-on-entry "debug" "\ Request FUNCTION to invoke debugger each time it is called. When called interactively, prompt for FUNCTION in the minibuffer. This works by modifying the definition of FUNCTION. If you tell the debugger to continue, FUNCTION's execution proceeds. If FUNCTION is a normal function or a macro written in Lisp, you can also step through its execution. FUNCTION can also be a primitive that is not a special form, in which case stepping is not possible. Break-on-entry for primitive functions only works when that function is called from Lisp. Use \\[cancel-debug-on-entry] to cancel the effect of this command. Redefining FUNCTION also cancels it. \(fn FUNCTION)" t nil) (autoload 'cancel-debug-on-entry "debug" "\ Undo effect of \\[debug-on-entry] on FUNCTION. If FUNCTION is nil, cancel debug-on-entry for all functions. When called interactively, prompt for FUNCTION in the minibuffer. To specify a nil argument interactively, exit with an empty minibuffer. \(fn &optional FUNCTION)" t nil) ;;;*** ;;;### (autoloads (decipher-mode decipher) "decipher" "play/decipher.el" ;;;;;; (19259 35410)) ;;; Generated autoloads from play/decipher.el (autoload 'decipher "decipher" "\ Format a buffer of ciphertext for cryptanalysis and enter Decipher mode. \(fn)" t nil) (autoload 'decipher-mode "decipher" "\ Major mode for decrypting monoalphabetic substitution ciphers. Lower-case letters enter plaintext. Upper-case letters are commands. The buffer is made read-only so that normal Emacs commands cannot modify it. The most useful commands are: \\<decipher-mode-map> \\[decipher-digram-list] Display a list of all digrams & their frequency \\[decipher-frequency-count] Display the frequency of each ciphertext letter \\[decipher-adjacency-list] Show adjacency list for current letter (lists letters appearing next to it) \\[decipher-make-checkpoint] Save the current cipher alphabet (checkpoint) \\[decipher-restore-checkpoint] Restore a saved cipher alphabet (checkpoint) \(fn)" t nil) ;;;*** ;;;### (autoloads (delimit-columns-rectangle delimit-columns-region ;;;;;; delimit-columns-customize) "delim-col" "delim-col.el" (19259 ;;;;;; 35410)) ;;; Generated autoloads from delim-col.el (autoload 'delimit-columns-customize "delim-col" "\ Customization of `columns' group. \(fn)" t nil) (autoload 'delimit-columns-region "delim-col" "\ Prettify all columns in a text region. START and END delimits the text region. \(fn START END)" t nil) (autoload 'delimit-columns-rectangle "delim-col" "\ Prettify all columns in a text rectangle. START and END delimits the corners of text rectangle. \(fn START END)" t nil) ;;;*** ;;;### (autoloads (delphi-mode) "delphi" "progmodes/delphi.el" (19259 ;;;;;; 35410)) ;;; Generated autoloads from progmodes/delphi.el (autoload 'delphi-mode "delphi" "\ Major mode for editing Delphi code. \\<delphi-mode-map> \\[delphi-tab] - Indents the current line (or region, if Transient Mark mode is enabled and the region is active) of Delphi code. \\[delphi-find-unit] - Search for a Delphi source file. \\[delphi-fill-comment] - Fill the current comment. \\[delphi-new-comment-line] - If in a // comment, do a new comment line. M-x indent-region also works for indenting a whole region. Customization: `delphi-indent-level' (default 3) Indentation of Delphi statements with respect to containing block. `delphi-compound-block-indent' (default 0) Extra indentation for blocks in compound statements. `delphi-case-label-indent' (default 0) Extra indentation for case statement labels. `delphi-tab-always-indents' (default t) Non-nil means TAB in Delphi mode should always reindent the current line, regardless of where in the line point is when the TAB command is used. `delphi-newline-always-indents' (default t) Non-nil means NEWLINE in Delphi mode should always reindent the current line, insert a blank line and move to the default indent column of the blank line. `delphi-search-path' (default .) Directories to search when finding external units. `delphi-verbose' (default nil) If true then delphi token processing progress is reported to the user. Coloring: `delphi-comment-face' (default font-lock-comment-face) Face used to color delphi comments. `delphi-string-face' (default font-lock-string-face) Face used to color delphi strings. `delphi-keyword-face' (default font-lock-keyword-face) Face used to color delphi keywords. `delphi-other-face' (default nil) Face used to color everything else. Turning on Delphi mode calls the value of the variable delphi-mode-hook with no args, if that value is non-nil. \(fn &optional SKIP-INITIAL-PARSING)" t nil) ;;;*** ;;;### (autoloads (delete-selection-mode) "delsel" "delsel.el" (19259 ;;;;;; 35410)) ;;; Generated autoloads from delsel.el (defalias 'pending-delete-mode 'delete-selection-mode) (defvar delete-selection-mode nil "\ Non-nil if Delete-Selection mode is enabled. See the command `delete-selection-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `delete-selection-mode'.") (custom-autoload 'delete-selection-mode "delsel" nil) (autoload 'delete-selection-mode "delsel" "\ Toggle Delete Selection mode. With prefix ARG, turn Delete Selection mode on if ARG is positive, off if ARG is not positive. When Delete Selection mode is enabled, Transient Mark mode is also enabled and typed text replaces the selection if the selection is active. Otherwise, typed text is just inserted at point regardless of any selection. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (derived-mode-init-mode-variables define-derived-mode) ;;;;;; "derived" "emacs-lisp/derived.el" (19259 35410)) ;;; Generated autoloads from emacs-lisp/derived.el (autoload 'define-derived-mode "derived" "\ Create a new mode as a variant of an existing mode. The arguments to this command are as follow: CHILD: the name of the command for the derived mode. PARENT: the name of the command for the parent mode (e.g. `text-mode') or nil if there is no parent. NAME: a string which will appear in the status line (e.g. \"Hypertext\") DOCSTRING: an optional documentation string--if you do not supply one, the function will attempt to invent something useful. BODY: forms to execute just before running the hooks for the new mode. Do not use `interactive' here. BODY can start with a bunch of keyword arguments. The following keyword arguments are currently understood: :group GROUP Declare the customization group that corresponds to this mode. The command `customize-mode' uses this. :syntax-table TABLE Use TABLE instead of the default. A nil value means to simply use the same syntax-table as the parent. :abbrev-table TABLE Use TABLE instead of the default. A nil value means to simply use the same abbrev-table as the parent. Here is how you could define LaTeX-Thesis mode as a variant of LaTeX mode: (define-derived-mode LaTeX-thesis-mode LaTeX-mode \"LaTeX-Thesis\") You could then make new key bindings for `LaTeX-thesis-mode-map' without changing regular LaTeX mode. In this example, BODY is empty, and DOCSTRING is generated by default. On a more complicated level, the following command uses `sgml-mode' as the parent, and then sets the variable `case-fold-search' to nil: (define-derived-mode article-mode sgml-mode \"Article\" \"Major mode for editing technical articles.\" (setq case-fold-search nil)) Note that if the documentation string had been left out, it would have been generated automatically, with a reference to the keymap. The new mode runs the hook constructed by the function `derived-mode-hook-name'. See Info node `(elisp)Derived Modes' for more details. \(fn CHILD PARENT NAME &optional DOCSTRING &rest BODY)" nil (quote macro)) (autoload 'derived-mode-init-mode-variables "derived" "\ Initialize variables for a new MODE. Right now, if they don't already exist, set up a blank keymap, an empty syntax table, and an empty abbrev table -- these will be merged the first time the mode is used. \(fn MODE)" nil nil) ;;;*** ;;;### (autoloads (describe-char describe-text-properties) "descr-text" ;;;;;; "descr-text.el" (19259 35410)) ;;; Generated autoloads from descr-text.el (autoload 'describe-text-properties "descr-text" "\ Describe widgets, buttons, overlays, and text properties at POS. POS is taken to be in BUFFER or in current buffer if nil. Interactively, describe them for the character after point. If optional second argument OUTPUT-BUFFER is non-nil, insert the output into that buffer, and don't initialize or clear it otherwise. \(fn POS &optional OUTPUT-BUFFER BUFFER)" t nil) (autoload 'describe-char "descr-text" "\ Describe the character after POS (interactively, the character after point). Is POS is taken to be in buffer BUFFER or current buffer if nil. The information includes character code, charset and code points in it, syntax, category, how the character is encoded in a file, character composition information (if relevant), as well as widgets, buttons, overlays, and text properties. \(fn POS &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (desktop-revert desktop-save-in-desktop-dir desktop-change-dir ;;;;;; desktop-load-default desktop-read desktop-remove desktop-save ;;;;;; desktop-clear desktop-locals-to-save desktop-save-mode) "desktop" ;;;;;; "desktop.el" (19259 35410)) ;;; Generated autoloads from desktop.el (defvar desktop-save-mode nil "\ Non-nil if Desktop-Save mode is enabled. See the command `desktop-save-mode' for a description of this minor mode.") (custom-autoload 'desktop-save-mode "desktop" nil) (autoload 'desktop-save-mode "desktop" "\ Toggle desktop saving mode. With numeric ARG, turn desktop saving on if ARG is positive, off otherwise. If desktop saving is turned on, the state of Emacs is saved from one session to another. See variable `desktop-save' and function `desktop-read' for details. \(fn &optional ARG)" t nil) (defvar desktop-locals-to-save '(desktop-locals-to-save truncate-lines case-fold-search case-replace fill-column overwrite-mode change-log-default-name line-number-mode column-number-mode size-indication-mode buffer-file-coding-system indent-tabs-mode tab-width indicate-buffer-boundaries indicate-empty-lines show-trailing-whitespace) "\ List of local variables to save for each buffer. The variables are saved only when they really are local. Conventional minor modes are restored automatically; they should not be listed here.") (custom-autoload 'desktop-locals-to-save "desktop" t) (defvar desktop-save-buffer nil "\ When non-nil, save buffer status in desktop file. This variable becomes buffer local when set. If the value is a function, it is called by `desktop-save' with argument DESKTOP-DIRNAME to obtain auxiliary information to save in the desktop file along with the state of the buffer for which it was called. When file names are returned, they should be formatted using the call \"(desktop-file-name FILE-NAME DESKTOP-DIRNAME)\". Later, when `desktop-read' evaluates the desktop file, auxiliary information is passed as the argument DESKTOP-BUFFER-MISC to functions in `desktop-buffer-mode-handlers'.") (defvar desktop-buffer-mode-handlers nil "\ Alist of major mode specific functions to restore a desktop buffer. Functions listed are called by `desktop-create-buffer' when `desktop-read' evaluates the desktop file. List elements must have the form (MAJOR-MODE . RESTORE-BUFFER-FUNCTION). Buffers with a major mode not specified here, are restored by the default handler `desktop-restore-file-buffer'. Handlers are called with argument list (DESKTOP-BUFFER-FILE-NAME DESKTOP-BUFFER-NAME DESKTOP-BUFFER-MISC) Furthermore, they may use the following variables: desktop-file-version desktop-buffer-major-mode desktop-buffer-minor-modes desktop-buffer-point desktop-buffer-mark desktop-buffer-read-only desktop-buffer-locals If a handler returns a buffer, then the saved mode settings and variable values for that buffer are copied into it. Modules that define a major mode that needs a special handler should contain code like (defun foo-restore-desktop-buffer ... (add-to-list 'desktop-buffer-mode-handlers '(foo-mode . foo-restore-desktop-buffer)) Furthermore the major mode function must be autoloaded.") (put 'desktop-buffer-mode-handlers 'risky-local-variable t) (defvar desktop-minor-mode-handlers nil "\ Alist of functions to restore non-standard minor modes. Functions are called by `desktop-create-buffer' to restore minor modes. List elements must have the form (MINOR-MODE . RESTORE-FUNCTION). Minor modes not specified here, are restored by the standard minor mode function. Handlers are called with argument list (DESKTOP-BUFFER-LOCALS) Furthermore, they may use the following variables: desktop-file-version desktop-buffer-file-name desktop-buffer-name desktop-buffer-major-mode desktop-buffer-minor-modes desktop-buffer-point desktop-buffer-mark desktop-buffer-read-only desktop-buffer-misc When a handler is called, the buffer has been created and the major mode has been set, but local variables listed in desktop-buffer-locals has not yet been created and set. Modules that define a minor mode that needs a special handler should contain code like (defun foo-desktop-restore ... (add-to-list 'desktop-minor-mode-handlers '(foo-mode . foo-desktop-restore)) Furthermore the minor mode function must be autoloaded. See also `desktop-minor-mode-table'.") (put 'desktop-minor-mode-handlers 'risky-local-variable t) (autoload 'desktop-clear "desktop" "\ Empty the Desktop. This kills all buffers except for internal ones and those with names matched by a regular expression in the list `desktop-clear-preserve-buffers'. Furthermore, it clears the variables listed in `desktop-globals-to-clear'. \(fn)" t nil) (autoload 'desktop-save "desktop" "\ Save the desktop in a desktop file. Parameter DIRNAME specifies where to save the desktop file. Optional parameter RELEASE says whether we're done with this desktop. See also `desktop-base-file-name'. \(fn DIRNAME &optional RELEASE)" t nil) (autoload 'desktop-remove "desktop" "\ Delete desktop file in `desktop-dirname'. This function also sets `desktop-dirname' to nil. \(fn)" t nil) (autoload 'desktop-read "desktop" "\ Read and process the desktop file in directory DIRNAME. Look for a desktop file in DIRNAME, or if DIRNAME is omitted, look in directories listed in `desktop-path'. If a desktop file is found, it is processed and `desktop-after-read-hook' is run. If no desktop file is found, clear the desktop and run `desktop-no-desktop-file-hook'. This function is a no-op when Emacs is running in batch mode. It returns t if a desktop file was loaded, nil otherwise. \(fn &optional DIRNAME)" t nil) (autoload 'desktop-load-default "desktop" "\ Load the `default' start-up library manually. Also inhibit further loading of it. \(fn)" nil nil) (autoload 'desktop-change-dir "desktop" "\ Change to desktop saved in DIRNAME. Kill the desktop as specified by variables `desktop-save-mode' and `desktop-save', then clear the desktop and load the desktop file in directory DIRNAME. \(fn DIRNAME)" t nil) (autoload 'desktop-save-in-desktop-dir "desktop" "\ Save the desktop in directory `desktop-dirname'. \(fn)" t nil) (autoload 'desktop-revert "desktop" "\ Revert to the last loaded desktop. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-article-outlook-deuglify-article gnus-outlook-deuglify-article ;;;;;; gnus-article-outlook-repair-attribution gnus-article-outlook-unwrap-lines) ;;;;;; "deuglify" "gnus/deuglify.el" (19259 35410)) ;;; Generated autoloads from gnus/deuglify.el (autoload 'gnus-article-outlook-unwrap-lines "deuglify" "\ Unwrap lines that appear to be wrapped citation lines. You can control what lines will be unwrapped by frobbing `gnus-outlook-deuglify-unwrap-min' and `gnus-outlook-deuglify-unwrap-max', indicating the minimum and maximum length of an unwrapped citation line. If NODISPLAY is non-nil, don't redisplay the article buffer. \(fn &optional NODISPLAY)" t nil) (autoload 'gnus-article-outlook-repair-attribution "deuglify" "\ Repair a broken attribution line. If NODISPLAY is non-nil, don't redisplay the article buffer. \(fn &optional NODISPLAY)" t nil) (autoload 'gnus-outlook-deuglify-article "deuglify" "\ Full deuglify of broken Outlook (Express) articles. Treat dumbquotes, unwrap lines, repair attribution and rearrange citation. If NODISPLAY is non-nil, don't redisplay the article buffer. \(fn &optional NODISPLAY)" t nil) (autoload 'gnus-article-outlook-deuglify-article "deuglify" "\ Deuglify broken Outlook (Express) articles and redisplay. \(fn)" t nil) ;;;*** ;;;### (autoloads (diary-mode diary-mail-entries diary) "diary-lib" ;;;;;; "calendar/diary-lib.el" (19259 35410)) ;;; Generated autoloads from calendar/diary-lib.el (autoload 'diary "diary-lib" "\ Generate the diary window for ARG days starting with the current date. If no argument is provided, the number of days of diary entries is governed by the variable `diary-number-of-entries'. A value of ARG less than 1 does nothing. This function is suitable for execution in a `.emacs' file. \(fn &optional ARG)" t nil) (autoload 'diary-mail-entries "diary-lib" "\ Send a mail message showing diary entries for next NDAYS days. If no prefix argument is given, NDAYS is set to `diary-mail-days'. Mail is sent to the address specified by `diary-mail-addr'. Here is an example of a script to call `diary-mail-entries', suitable for regular scheduling using cron (or at). Note that since `emacs -script' does not load your `.emacs' file, you should ensure that all relevant variables are set. #!/usr/bin/emacs -script ;; diary-rem.el - run the Emacs diary-reminder \(setq diary-mail-days 3 diary-file \"/path/to/diary.file\" calendar-date-style 'european diary-mail-addr \"user@host.name\") \(diary-mail-entries) # diary-rem.el ends here \(fn &optional NDAYS)" t nil) (autoload 'diary-mode "diary-lib" "\ Major mode for editing the diary file. \(fn)" t nil) ;;;*** ;;;### (autoloads (diff-backup diff diff-command diff-switches) "diff" ;;;;;; "diff.el" (19259 35410)) ;;; Generated autoloads from diff.el (defvar diff-switches (purecopy "-c") "\ A string or list of strings specifying switches to be passed to diff.") (custom-autoload 'diff-switches "diff" t) (defvar diff-command (purecopy "diff") "\ The command to use to run diff.") (custom-autoload 'diff-command "diff" t) (autoload 'diff "diff" "\ Find and display the differences between OLD and NEW files. When called interactively, read OLD and NEW using the minibuffer; the default for NEW is the current buffer's file name, and the default for OLD is a backup file for NEW, if one exists. If NO-ASYNC is non-nil, call diff synchronously. When called interactively with a prefix argument, prompt interactively for diff switches. Otherwise, the switches specified in `diff-switches' are passed to the diff command. \(fn OLD NEW &optional SWITCHES NO-ASYNC)" t nil) (autoload 'diff-backup "diff" "\ Diff this file with its backup file or vice versa. Uses the latest backup, if there are several numerical backups. If this file is a backup, diff it with its original. The backup file is the first file given to `diff'. With prefix arg, prompt for diff switches. \(fn FILE &optional SWITCHES)" t nil) ;;;*** ;;;### (autoloads (diff-minor-mode diff-mode) "diff-mode" "diff-mode.el" ;;;;;; (19259 35411)) ;;; Generated autoloads from diff-mode.el (autoload 'diff-mode "diff-mode" "\ Major mode for viewing/editing context diffs. Supports unified and context diffs as well as (to a lesser extent) normal diffs. When the buffer is read-only, the ESC prefix is not necessary. If you edit the buffer manually, diff-mode will try to update the hunk headers for you on-the-fly. You can also switch between context diff and unified diff with \\[diff-context->unified], or vice versa with \\[diff-unified->context] and you can also reverse the direction of a diff with \\[diff-reverse-direction]. \\{diff-mode-map} \(fn)" t nil) (autoload 'diff-minor-mode "diff-mode" "\ Minor mode for viewing/editing context diffs. \\{diff-minor-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (dig) "dig" "net/dig.el" (19259 35411)) ;;; Generated autoloads from net/dig.el (autoload 'dig "dig" "\ Query addresses of a DOMAIN using dig, by calling `dig-invoke'. Optional arguments are passed to `dig-invoke'. \(fn DOMAIN &optional QUERY-TYPE QUERY-CLASS QUERY-OPTION DIG-OPTION SERVER)" t nil) ;;;*** ;;;### (autoloads (dired-mode dired-auto-revert-buffer dired-noselect ;;;;;; dired-other-frame dired-other-window dired dired-trivial-filenames ;;;;;; dired-listing-switches) "dired" "dired.el" (19259 35411)) ;;; Generated autoloads from dired.el (defvar dired-listing-switches (purecopy "-al") "\ Switches passed to `ls' for Dired. MUST contain the `l' option. May contain all other options that don't contradict `-l'; may contain even `F', `b', `i' and `s'. See also the variable `dired-ls-F-marks-symlinks' concerning the `F' switch. On systems such as MS-DOS and MS-Windows, which use `ls' emulation in Lisp, some of the `ls' switches are not supported; see the doc string of `insert-directory' in `ls-lisp.el' for more details.") (custom-autoload 'dired-listing-switches "dired" t) (defvar dired-chown-program (purecopy (if (memq system-type '(hpux usg-unix-v irix linux gnu/linux cygwin)) "chown" (if (file-exists-p "/usr/sbin/chown") "/usr/sbin/chown" "/etc/chown"))) "\ Name of chown command (usually `chown' or `/etc/chown').") (defvar dired-trivial-filenames (purecopy "^\\.\\.?$\\|^#") "\ Regexp of files to skip when finding first file of a directory. A value of nil means move to the subdir line. A value of t means move to first file.") (custom-autoload 'dired-trivial-filenames "dired" t) (defvar dired-directory nil "\ The directory name or wildcard spec that this dired directory lists. Local to each dired buffer. May be a list, in which case the car is the directory name and the cdr is the list of files to mention. The directory name must be absolute, but need not be fully expanded.") (define-key ctl-x-map "d" 'dired) (autoload 'dired "dired" "\ \"Edit\" directory DIRNAME--delete, rename, print, etc. some files in it. Optional second argument SWITCHES specifies the `ls' options used. \(Interactively, use a prefix argument to be able to specify SWITCHES.) Dired displays a list of files in DIRNAME (which may also have shell wildcards appended to select certain files). If DIRNAME is a cons, its first element is taken as the directory name and the rest as an explicit list of files to make directory entries for. \\<dired-mode-map>You can move around in it with the usual commands. You can flag files for deletion with \\[dired-flag-file-deletion] and then delete them by typing \\[dired-do-flagged-delete]. Type \\[describe-mode] after entering Dired for more info. If DIRNAME is already in a dired buffer, that buffer is used without refresh. \(fn DIRNAME &optional SWITCHES)" t nil) (define-key ctl-x-4-map "d" 'dired-other-window) (autoload 'dired-other-window "dired" "\ \"Edit\" directory DIRNAME. Like `dired' but selects in another window. \(fn DIRNAME &optional SWITCHES)" t nil) (define-key ctl-x-5-map "d" 'dired-other-frame) (autoload 'dired-other-frame "dired" "\ \"Edit\" directory DIRNAME. Like `dired' but makes a new frame. \(fn DIRNAME &optional SWITCHES)" t nil) (autoload 'dired-noselect "dired" "\ Like `dired' but returns the dired buffer as value, does not select it. \(fn DIR-OR-LIST &optional SWITCHES)" nil nil) (defvar dired-auto-revert-buffer nil "\ Automatically revert dired buffer on revisiting. If t, revisiting an existing dired buffer automatically reverts it. If its value is a function, call this function with the directory name as single argument and revert the buffer if it returns non-nil. Otherwise, a message offering to revert the changed dired buffer is displayed. Note that this is not the same as `auto-revert-mode' that periodically reverts at specified time intervals.") (custom-autoload 'dired-auto-revert-buffer "dired" t) (autoload 'dired-mode "dired" "\ Mode for \"editing\" directory listings. In Dired, you are \"editing\" a list of the files in a directory and (optionally) its subdirectories, in the format of `ls -lR'. Each directory is a page: use \\[backward-page] and \\[forward-page] to move pagewise. \"Editing\" means that you can run shell commands on files, visit, compress, load or byte-compile them, change their file attributes and insert subdirectories into the same buffer. You can \"mark\" files for later commands or \"flag\" them for deletion, either file by file or all files matching certain criteria. You can move using the usual cursor motion commands.\\<dired-mode-map> Letters no longer insert themselves. Digits are prefix arguments. Instead, type \\[dired-flag-file-deletion] to flag a file for Deletion. Type \\[dired-mark] to Mark a file or subdirectory for later commands. Most commands operate on the marked files and use the current file if no files are marked. Use a numeric prefix argument to operate on the next ARG (or previous -ARG if ARG<0) files, or just `1' to operate on the current file only. Prefix arguments override marks. Mark-using commands display a list of failures afterwards. Type \\[dired-summary] to see why something went wrong. Type \\[dired-unmark] to Unmark a file or all files of a subdirectory. Type \\[dired-unmark-backward] to back up one line and unflag. Type \\[dired-do-flagged-delete] to eXecute the deletions requested. Type \\[dired-find-file] to Find the current line's file (or dired it in another buffer, if it is a directory). Type \\[dired-find-file-other-window] to find file or dired directory in Other window. Type \\[dired-maybe-insert-subdir] to Insert a subdirectory in this buffer. Type \\[dired-do-rename] to Rename a file or move the marked files to another directory. Type \\[dired-do-copy] to Copy files. Type \\[dired-sort-toggle-or-edit] to toggle Sorting by name/date or change the `ls' switches. Type \\[revert-buffer] to read all currently expanded directories aGain. This retains all marks and hides subdirs again that were hidden before. SPC and DEL can be used to move down and up by lines. If Dired ever gets confused, you can either type \\[revert-buffer] to read the directories again, type \\[dired-do-redisplay] to relist a single or the marked files or a subdirectory, or type \\[dired-build-subdir-alist] to parse the buffer again for the directory tree. Customization variables (rename this buffer and type \\[describe-variable] on each line for more info): `dired-listing-switches' `dired-trivial-filenames' `dired-shrink-to-fit' `dired-marker-char' `dired-del-marker' `dired-keep-marker-rename' `dired-keep-marker-copy' `dired-keep-marker-hardlink' `dired-keep-marker-symlink' Hooks (use \\[describe-variable] to see their documentation): `dired-before-readin-hook' `dired-after-readin-hook' `dired-mode-hook' `dired-load-hook' Keybindings: \\{dired-mode-map} \(fn &optional DIRNAME SWITCHES)" nil nil) (put 'dired-find-alternate-file 'disabled t) ;;;*** ;;;### (autoloads (dirtrack dirtrack-mode) "dirtrack" "dirtrack.el" ;;;;;; (19259 35411)) ;;; Generated autoloads from dirtrack.el (autoload 'dirtrack-mode "dirtrack" "\ Enable or disable Dirtrack directory tracking in a shell buffer. This method requires that your shell prompt contain the full current working directory at all times, and that `dirtrack-list' is set to match the prompt. This is an alternative to `shell-dirtrack-mode', which works differently, by tracking `cd' and similar commands which change the shell working directory. \(fn &optional ARG)" t nil) (autoload 'dirtrack "dirtrack" "\ Determine the current directory by scanning the process output for a prompt. The prompt to look for is the first item in `dirtrack-list'. You can toggle directory tracking by using the function `dirtrack-mode'. If directory tracking does not seem to be working, you can use the function `dirtrack-debug-mode' to turn on debugging output. \(fn INPUT)" nil nil) ;;;*** ;;;### (autoloads (disassemble) "disass" "emacs-lisp/disass.el" (19259 ;;;;;; 35411)) ;;; Generated autoloads from emacs-lisp/disass.el (autoload 'disassemble "disass" "\ Print disassembled code for OBJECT in (optional) BUFFER. OBJECT can be a symbol defined as a function, or a function itself \(a lambda expression or a compiled-function object). If OBJECT is not already compiled, we compile it, but do not redefine OBJECT if it is a symbol. \(fn OBJECT &optional BUFFER INDENT INTERACTIVE-P)" t nil) ;;;*** ;;;### (autoloads (standard-display-european glyph-face glyph-char ;;;;;; make-glyph-code create-glyph standard-display-underline standard-display-graphic ;;;;;; standard-display-g1 standard-display-ascii standard-display-default ;;;;;; standard-display-8bit describe-current-display-table describe-display-table ;;;;;; set-display-table-slot display-table-slot make-display-table) ;;;;;; "disp-table" "disp-table.el" (19259 35411)) ;;; Generated autoloads from disp-table.el (autoload 'make-display-table "disp-table" "\ Return a new, empty display table. \(fn)" nil nil) (autoload 'display-table-slot "disp-table" "\ Return the value of the extra slot in DISPLAY-TABLE named SLOT. SLOT may be a number from 0 to 5 inclusive, or a slot name (symbol). Valid symbols are `truncation', `wrap', `escape', `control', `selective-display', and `vertical-border'. \(fn DISPLAY-TABLE SLOT)" nil nil) (autoload 'set-display-table-slot "disp-table" "\ Set the value of the extra slot in DISPLAY-TABLE named SLOT to VALUE. SLOT may be a number from 0 to 5 inclusive, or a name (symbol). Valid symbols are `truncation', `wrap', `escape', `control', `selective-display', and `vertical-border'. \(fn DISPLAY-TABLE SLOT VALUE)" nil nil) (autoload 'describe-display-table "disp-table" "\ Describe the display table DT in a help buffer. \(fn DT)" nil nil) (autoload 'describe-current-display-table "disp-table" "\ Describe the display table in use in the selected window and buffer. \(fn)" t nil) (autoload 'standard-display-8bit "disp-table" "\ Display characters in the range L to H literally. \(fn L H)" nil nil) (autoload 'standard-display-default "disp-table" "\ Display characters in the range L to H using the default notation. \(fn L H)" nil nil) (autoload 'standard-display-ascii "disp-table" "\ Display character C using printable string S. \(fn C S)" nil nil) (autoload 'standard-display-g1 "disp-table" "\ Display character C as character SC in the g1 character set. This function assumes that your terminal uses the SO/SI characters; it is meaningless for an X frame. \(fn C SC)" nil nil) (autoload 'standard-display-graphic "disp-table" "\ Display character C as character GC in graphics character set. This function assumes VT100-compatible escapes; it is meaningless for an X frame. \(fn C GC)" nil nil) (autoload 'standard-display-underline "disp-table" "\ Display character C as character UC plus underlining. \(fn C UC)" nil nil) (autoload 'create-glyph "disp-table" "\ Allocate a glyph code to display by sending STRING to the terminal. \(fn STRING)" nil nil) (autoload 'make-glyph-code "disp-table" "\ Return a glyph code representing char CHAR with face FACE. \(fn CHAR &optional FACE)" nil nil) (autoload 'glyph-char "disp-table" "\ Return the character of glyph code GLYPH. \(fn GLYPH)" nil nil) (autoload 'glyph-face "disp-table" "\ Return the face of glyph code GLYPH, or nil if glyph has default face. \(fn GLYPH)" nil nil) (autoload 'standard-display-european "disp-table" "\ Semi-obsolete way to toggle display of ISO 8859 European characters. This function is semi-obsolete; you probably don't need it, or else you probably should use `set-language-environment' or `set-locale-environment'. This function enables European character display if ARG is positive, disables it if negative. Otherwise, it toggles European character display. When this mode is enabled, characters in the range of 160 to 255 display not as octal escapes, but as accented characters. Codes 146 and 160 display as apostrophe and space, even though they are not the ASCII codes for apostrophe and space. Enabling European character display with this command noninteractively from Lisp code also selects Latin-1 as the language environment. This provides increased compatibility for users who call this function in `.emacs'. \(fn ARG)" nil nil) ;;;*** ;;;### (autoloads (dissociated-press) "dissociate" "play/dissociate.el" ;;;;;; (19259 35411)) ;;; Generated autoloads from play/dissociate.el (autoload 'dissociated-press "dissociate" "\ Dissociate the text of the current buffer. Output goes in buffer named *Dissociation*, which is redisplayed each time text is added to it. Every so often the user must say whether to continue. If ARG is positive, require ARG chars of continuity. If ARG is negative, require -ARG words of continuity. Default is 2. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (dnd-protocol-alist) "dnd" "dnd.el" (19259 35411)) ;;; Generated autoloads from dnd.el (defvar dnd-protocol-alist `((,(purecopy "^file:///") . dnd-open-local-file) (,(purecopy "^file://") . dnd-open-file) (,(purecopy "^file:") . dnd-open-local-file) (,(purecopy "^\\(https?\\|ftp\\|file\\|nfs\\)://") . dnd-open-file)) "\ The functions to call for different protocols when a drop is made. This variable is used by `dnd-handle-one-url' and `dnd-handle-file-name'. The list contains of (REGEXP . FUNCTION) pairs. The functions shall take two arguments, URL, which is the URL dropped and ACTION which is the action to be performed for the drop (move, copy, link, private or ask). If no match is found here, and the value of `browse-url-browser-function' is a pair of (REGEXP . FUNCTION), those regexps are tried for a match. If no match is found, the URL is inserted as text by calling `dnd-insert-text'. The function shall return the action done (move, copy, link or private) if some action was made, or nil if the URL is ignored.") (custom-autoload 'dnd-protocol-alist "dnd" t) ;;;*** ;;;### (autoloads (dns-mode-soa-increment-serial dns-mode) "dns-mode" ;;;;;; "textmodes/dns-mode.el" (19259 35411)) ;;; Generated autoloads from textmodes/dns-mode.el (autoload 'dns-mode "dns-mode" "\ Major mode for viewing and editing DNS master files. This mode is inherited from text mode. It add syntax highlighting, and some commands for handling DNS master files. Its keymap inherits from `text-mode' and it has the same variables for customizing indentation. It has its own abbrev table and its own syntax table. Turning on DNS mode runs `dns-mode-hook'. \(fn)" t nil) (defalias 'zone-mode 'dns-mode) (autoload 'dns-mode-soa-increment-serial "dns-mode" "\ Locate SOA record and increment the serial field. \(fn)" t nil) (add-to-list 'auto-mode-alist (purecopy '("\\.soa\\'" . dns-mode))) ;;;*** ;;;### (autoloads (doc-view-bookmark-jump doc-view-minor-mode doc-view-mode ;;;;;; doc-view-mode-p) "doc-view" "doc-view.el" (19259 35412)) ;;; Generated autoloads from doc-view.el (autoload 'doc-view-mode-p "doc-view" "\ Return non-nil if image type TYPE is available for `doc-view'. Image types are symbols like `dvi', `postscript' or `pdf'. \(fn TYPE)" nil nil) (autoload 'doc-view-mode "doc-view" "\ Major mode in DocView buffers. DocView Mode is an Emacs document viewer. It displays PDF, PS and DVI files (as PNG images) in Emacs buffers. You can use \\<doc-view-mode-map>\\[doc-view-toggle-display] to toggle between displaying the document or editing it as text. \\{doc-view-mode-map} \(fn)" t nil) (autoload 'doc-view-minor-mode "doc-view" "\ Toggle Doc view minor mode. With arg, turn Doc view minor mode on if arg is positive, off otherwise. See the command `doc-view-mode' for more information on this mode. \(fn &optional ARG)" t nil) (autoload 'doc-view-bookmark-jump "doc-view" "\ Not documented \(fn BMK)" nil nil) ;;;*** ;;;### (autoloads (doctor) "doctor" "play/doctor.el" (19259 35412)) ;;; Generated autoloads from play/doctor.el (autoload 'doctor "doctor" "\ Switch to *doctor* buffer and start giving psychotherapy. \(fn)" t nil) ;;;*** ;;;### (autoloads (double-mode) "double" "double.el" (19259 35412)) ;;; Generated autoloads from double.el (autoload 'double-mode "double" "\ Toggle Double mode. With prefix argument ARG, turn Double mode on if ARG is positive, otherwise turn it off. When Double mode is on, some keys will insert different strings when pressed twice. See variable `double-map' for details. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (dunnet) "dunnet" "play/dunnet.el" (19259 35412)) ;;; Generated autoloads from play/dunnet.el (autoload 'dunnet "dunnet" "\ Switch to *dungeon* buffer and start game. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-earcon-display) "earcon" "gnus/earcon.el" ;;;;;; (19259 35412)) ;;; Generated autoloads from gnus/earcon.el (autoload 'gnus-earcon-display "earcon" "\ Play sounds in message buffers. \(fn)" t nil) ;;;*** ;;;### (autoloads (easy-mmode-defsyntax easy-mmode-defmap easy-mmode-define-keymap ;;;;;; define-globalized-minor-mode define-minor-mode) "easy-mmode" ;;;;;; "emacs-lisp/easy-mmode.el" (19259 35412)) ;;; Generated autoloads from emacs-lisp/easy-mmode.el (defalias 'easy-mmode-define-minor-mode 'define-minor-mode) (autoload 'define-minor-mode "easy-mmode" "\ Define a new minor mode MODE. This function defines the associated control variable MODE, keymap MODE-map, and toggle command MODE. DOC is the documentation for the mode toggle command. Optional INIT-VALUE is the initial value of the mode's variable. Optional LIGHTER is displayed in the modeline when the mode is on. Optional KEYMAP is the default (defvar) keymap bound to the mode keymap. If it is a list, it is passed to `easy-mmode-define-keymap' in order to build a valid keymap. It's generally better to use a separate MODE-map variable than to use this argument. The above three arguments can be skipped if keyword arguments are used (see below). BODY contains code to execute each time the mode is activated or deactivated. It is executed after toggling the mode, and before running the hook variable `MODE-hook'. Before the actual body code, you can write keyword arguments (alternating keywords and values). These following keyword arguments are supported (other keywords will be passed to `defcustom' if the minor mode is global): :group GROUP Custom group name to use in all generated `defcustom' forms. Defaults to MODE without the possible trailing \"-mode\". Don't use this default group name unless you have written a `defgroup' to define that group properly. :global GLOBAL If non-nil specifies that the minor mode is not meant to be buffer-local, so don't make the variable MODE buffer-local. By default, the mode is buffer-local. :init-value VAL Same as the INIT-VALUE argument. :lighter SPEC Same as the LIGHTER argument. :keymap MAP Same as the KEYMAP argument. :require SYM Same as in `defcustom'. For example, you could write (define-minor-mode foo-mode \"If enabled, foo on you!\" :lighter \" Foo\" :require 'foo :global t :group 'hassle :version \"27.5\" ...BODY CODE...) \(fn MODE DOC &optional INIT-VALUE LIGHTER KEYMAP &rest BODY)" nil (quote macro)) (defalias 'easy-mmode-define-global-mode 'define-globalized-minor-mode) (defalias 'define-global-minor-mode 'define-globalized-minor-mode) (autoload 'define-globalized-minor-mode "easy-mmode" "\ Make a global mode GLOBAL-MODE corresponding to buffer-local minor MODE. TURN-ON is a function that will be called with no args in every buffer and that should try to turn MODE on if applicable for that buffer. KEYS is a list of CL-style keyword arguments. As the minor mode defined by this function is always global, any :global keyword is ignored. Other keywords have the same meaning as in `define-minor-mode', which see. In particular, :group specifies the custom group. The most useful keywords are those that are passed on to the `defcustom'. It normally makes no sense to pass the :lighter or :keymap keywords to `define-globalized-minor-mode', since these are usually passed to the buffer-local version of the minor mode. If MODE's set-up depends on the major mode in effect when it was enabled, then disabling and reenabling MODE should make MODE work correctly with the current major mode. This is important to prevent problems with derived modes, that is, major modes that call another major mode in their body. \(fn GLOBAL-MODE MODE TURN-ON &rest KEYS)" nil (quote macro)) (autoload 'easy-mmode-define-keymap "easy-mmode" "\ Return a keymap built from bindings BS. BS must be a list of (KEY . BINDING) where KEY and BINDINGS are suitable for `define-key'. Optional NAME is passed to `make-sparse-keymap'. Optional map M can be used to modify an existing map. ARGS is a list of additional keyword arguments. Valid keywords and arguments are: :name Name of the keymap; overrides NAME argument. :dense Non-nil for a dense keymap. :inherit Parent keymap. :group Ignored. :suppress Non-nil to call `suppress-keymap' on keymap, 'nodigits to suppress digits as prefix arguments. \(fn BS &optional NAME M ARGS)" nil nil) (autoload 'easy-mmode-defmap "easy-mmode" "\ Define a constant M whose value is the result of `easy-mmode-define-keymap'. The M, BS, and ARGS arguments are as per that function. DOC is the constant's documentation. \(fn M BS DOC &rest ARGS)" nil (quote macro)) (autoload 'easy-mmode-defsyntax "easy-mmode" "\ Define variable ST as a syntax-table. CSS contains a list of syntax specifications of the form (CHAR . SYNTAX). \(fn ST CSS DOC &rest ARGS)" nil (quote macro)) ;;;*** ;;;### (autoloads (easy-menu-change easy-menu-create-menu easy-menu-do-define ;;;;;; easy-menu-define) "easymenu" "emacs-lisp/easymenu.el" (19259 ;;;;;; 35412)) ;;; Generated autoloads from emacs-lisp/easymenu.el (put 'easy-menu-define 'lisp-indent-function 'defun) (autoload 'easy-menu-define "easymenu" "\ Define a menu bar submenu in maps MAPS, according to MENU. If SYMBOL is non-nil, store the menu keymap in the value of SYMBOL, and define SYMBOL as a function to pop up the menu, with DOC as its doc string. If SYMBOL is nil, just store the menu keymap into MAPS. The first element of MENU must be a string. It is the menu bar item name. It may be followed by the following keyword argument pairs :filter FUNCTION FUNCTION is a function with one argument, the rest of menu items. It returns the remaining items of the displayed menu. :visible INCLUDE INCLUDE is an expression; this menu is only visible if this expression has a non-nil value. `:included' is an alias for `:visible'. :active ENABLE ENABLE is an expression; the menu is enabled for selection whenever this expression's value is non-nil. The rest of the elements in MENU, are menu items. A menu item is usually a vector of three elements: [NAME CALLBACK ENABLE] NAME is a string--the menu item name. CALLBACK is a command to run when the item is chosen, or a list to evaluate when the item is chosen. ENABLE is an expression; the item is enabled for selection whenever this expression's value is non-nil. Alternatively, a menu item may have the form: [ NAME CALLBACK [ KEYWORD ARG ] ... ] Where KEYWORD is one of the symbols defined below. :keys KEYS KEYS is a string; a complex keyboard equivalent to this menu item. This is normally not needed because keyboard equivalents are usually computed automatically. KEYS is expanded with `substitute-command-keys' before it is used. :key-sequence KEYS KEYS is nil, a string or a vector; nil or a keyboard equivalent to this menu item. This is a hint that will considerably speed up Emacs' first display of a menu. Use `:key-sequence nil' when you know that this menu item has no keyboard equivalent. :active ENABLE ENABLE is an expression; the item is enabled for selection whenever this expression's value is non-nil. :visible INCLUDE INCLUDE is an expression; this item is only visible if this expression has a non-nil value. `:included' is an alias for `:visible'. :label FORM FORM is an expression that will be dynamically evaluated and whose value will be used for the menu entry's text label (the default is NAME). :suffix FORM FORM is an expression that will be dynamically evaluated and whose value will be concatenated to the menu entry's label. :style STYLE STYLE is a symbol describing the type of menu item. The following are defined: toggle: A checkbox. Prepend the name with `(*) ' or `( ) ' depending on if selected or not. radio: A radio button. Prepend the name with `[X] ' or `[ ] ' depending on if selected or not. button: Surround the name with `[' and `]'. Use this for an item in the menu bar itself. anything else means an ordinary menu item. :selected SELECTED SELECTED is an expression; the checkbox or radio button is selected whenever this expression's value is non-nil. :help HELP HELP is a string, the help to display for the menu item. A menu item can be a string. Then that string appears in the menu as unselectable text. A string consisting solely of hyphens is displayed as a solid horizontal line. A menu item can be a list with the same format as MENU. This is a submenu. \(fn SYMBOL MAPS DOC MENU)" nil (quote macro)) (autoload 'easy-menu-do-define "easymenu" "\ Not documented \(fn SYMBOL MAPS DOC MENU)" nil nil) (autoload 'easy-menu-create-menu "easymenu" "\ Create a menu called MENU-NAME with items described in MENU-ITEMS. MENU-NAME is a string, the name of the menu. MENU-ITEMS is a list of items possibly preceded by keyword pairs as described in `easy-menu-define'. \(fn MENU-NAME MENU-ITEMS)" nil nil) (autoload 'easy-menu-change "easymenu" "\ Change menu found at PATH as item NAME to contain ITEMS. PATH is a list of strings for locating the menu that should contain a submenu named NAME. ITEMS is a list of menu items, as in `easy-menu-define'. These items entirely replace the previous items in that submenu. If MAP is specified, it should normally be a keymap; nil stands for the local menu-bar keymap. It can also be a symbol, which has earlier been used as the first argument in a call to `easy-menu-define', or the value of such a symbol. If the menu located by PATH has no submenu named NAME, add one. If the optional argument BEFORE is present, add it just before the submenu named BEFORE, otherwise add it at the end of the menu. To implement dynamic menus, either call this from `menu-bar-update-hook' or use a menu filter. \(fn PATH NAME ITEMS &optional BEFORE MAP)" nil nil) ;;;*** ;;;### (autoloads (ebnf-pop-style ebnf-push-style ebnf-reset-style ;;;;;; ebnf-apply-style ebnf-merge-style ebnf-delete-style ebnf-insert-style ;;;;;; ebnf-find-style ebnf-setup ebnf-syntax-region ebnf-syntax-buffer ;;;;;; ebnf-syntax-file ebnf-syntax-directory ebnf-eps-region ebnf-eps-buffer ;;;;;; ebnf-eps-file ebnf-eps-directory ebnf-spool-region ebnf-spool-buffer ;;;;;; ebnf-spool-file ebnf-spool-directory ebnf-print-region ebnf-print-buffer ;;;;;; ebnf-print-file ebnf-print-directory ebnf-customize) "ebnf2ps" ;;;;;; "progmodes/ebnf2ps.el" (19259 35412)) ;;; Generated autoloads from progmodes/ebnf2ps.el (autoload 'ebnf-customize "ebnf2ps" "\ Customization for ebnf group. \(fn)" t nil) (autoload 'ebnf-print-directory "ebnf2ps" "\ Generate and print a PostScript syntactic chart image of DIRECTORY. If DIRECTORY is nil, it's used `default-directory'. The files in DIRECTORY that matches `ebnf-file-suffix-regexp' (which see) are processed. See also `ebnf-print-buffer'. \(fn &optional DIRECTORY)" t nil) (autoload 'ebnf-print-file "ebnf2ps" "\ Generate and print a PostScript syntactic chart image of the file FILE. If optional arg DO-NOT-KILL-BUFFER-WHEN-DONE is non-nil, the buffer isn't killed after process termination. See also `ebnf-print-buffer'. \(fn FILE &optional DO-NOT-KILL-BUFFER-WHEN-DONE)" t nil) (autoload 'ebnf-print-buffer "ebnf2ps" "\ Generate and print a PostScript syntactic chart image of the buffer. When called with a numeric prefix argument (C-u), prompts the user for the name of a file to save the PostScript image in, instead of sending it to the printer. More specifically, the FILENAME argument is treated as follows: if it is nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is a number, prompt the user for the name of the file to save in. \(fn &optional FILENAME)" t nil) (autoload 'ebnf-print-region "ebnf2ps" "\ Generate and print a PostScript syntactic chart image of the region. Like `ebnf-print-buffer', but prints just the current region. \(fn FROM TO &optional FILENAME)" t nil) (autoload 'ebnf-spool-directory "ebnf2ps" "\ Generate and spool a PostScript syntactic chart image of DIRECTORY. If DIRECTORY is nil, it's used `default-directory'. The files in DIRECTORY that matches `ebnf-file-suffix-regexp' (which see) are processed. See also `ebnf-spool-buffer'. \(fn &optional DIRECTORY)" t nil) (autoload 'ebnf-spool-file "ebnf2ps" "\ Generate and spool a PostScript syntactic chart image of the file FILE. If optional arg DO-NOT-KILL-BUFFER-WHEN-DONE is non-nil, the buffer isn't killed after process termination. See also `ebnf-spool-buffer'. \(fn FILE &optional DO-NOT-KILL-BUFFER-WHEN-DONE)" t nil) (autoload 'ebnf-spool-buffer "ebnf2ps" "\ Generate and spool a PostScript syntactic chart image of the buffer. Like `ebnf-print-buffer' except that the PostScript image is saved in a local buffer to be sent to the printer later. Use the command `ebnf-despool' to send the spooled images to the printer. \(fn)" t nil) (autoload 'ebnf-spool-region "ebnf2ps" "\ Generate a PostScript syntactic chart image of the region and spool locally. Like `ebnf-spool-buffer', but spools just the current region. Use the command `ebnf-despool' to send the spooled images to the printer. \(fn FROM TO)" t nil) (autoload 'ebnf-eps-directory "ebnf2ps" "\ Generate EPS files from EBNF files in DIRECTORY. If DIRECTORY is nil, it's used `default-directory'. The files in DIRECTORY that matches `ebnf-file-suffix-regexp' (which see) are processed. See also `ebnf-eps-buffer'. \(fn &optional DIRECTORY)" t nil) (autoload 'ebnf-eps-file "ebnf2ps" "\ Generate an EPS file from EBNF file FILE. If optional arg DO-NOT-KILL-BUFFER-WHEN-DONE is non-nil, the buffer isn't killed after EPS generation. See also `ebnf-eps-buffer'. \(fn FILE &optional DO-NOT-KILL-BUFFER-WHEN-DONE)" t nil) (autoload 'ebnf-eps-buffer "ebnf2ps" "\ Generate a PostScript syntactic chart image of the buffer in an EPS file. Generate an EPS file for each production in the buffer. The EPS file name has the following form: <PREFIX><PRODUCTION>.eps <PREFIX> is given by variable `ebnf-eps-prefix'. The default value is \"ebnf--\". <PRODUCTION> is the production name. Some characters in the production file name are replaced to produce a valid file name. For example, the production name \"A/B + C\" is modified to produce \"A_B_+_C\", and the EPS file name used in this case will be \"ebnf--A_B_+_C.eps\". WARNING: This function does *NOT* ask any confirmation to override existing files. \(fn)" t nil) (autoload 'ebnf-eps-region "ebnf2ps" "\ Generate a PostScript syntactic chart image of the region in an EPS file. Generate an EPS file for each production in the region. The EPS file name has the following form: <PREFIX><PRODUCTION>.eps <PREFIX> is given by variable `ebnf-eps-prefix'. The default value is \"ebnf--\". <PRODUCTION> is the production name. Some characters in the production file name are replaced to produce a valid file name. For example, the production name \"A/B + C\" is modified to produce \"A_B_+_C\", and the EPS file name used in this case will be \"ebnf--A_B_+_C.eps\". WARNING: This function does *NOT* ask any confirmation to override existing files. \(fn FROM TO)" t nil) (defalias 'ebnf-despool 'ps-despool) (autoload 'ebnf-syntax-directory "ebnf2ps" "\ Do a syntactic analysis of the files in DIRECTORY. If DIRECTORY is nil, use `default-directory'. Only the files in DIRECTORY that match `ebnf-file-suffix-regexp' (which see) are processed. See also `ebnf-syntax-buffer'. \(fn &optional DIRECTORY)" t nil) (autoload 'ebnf-syntax-file "ebnf2ps" "\ Do a syntactic analysis of the named FILE. If optional arg DO-NOT-KILL-BUFFER-WHEN-DONE is non-nil, the buffer isn't killed after syntax checking. See also `ebnf-syntax-buffer'. \(fn FILE &optional DO-NOT-KILL-BUFFER-WHEN-DONE)" t nil) (autoload 'ebnf-syntax-buffer "ebnf2ps" "\ Do a syntactic analysis of the current buffer. \(fn)" t nil) (autoload 'ebnf-syntax-region "ebnf2ps" "\ Do a syntactic analysis of a region. \(fn FROM TO)" t nil) (autoload 'ebnf-setup "ebnf2ps" "\ Return the current ebnf2ps setup. \(fn)" nil nil) (autoload 'ebnf-find-style "ebnf2ps" "\ Return style definition if NAME is already defined; otherwise, return nil. See `ebnf-style-database' documentation. \(fn NAME)" t nil) (autoload 'ebnf-insert-style "ebnf2ps" "\ Insert a new style NAME with inheritance INHERITS and values VALUES. See `ebnf-style-database' documentation. \(fn NAME INHERITS &rest VALUES)" t nil) (autoload 'ebnf-delete-style "ebnf2ps" "\ Delete style NAME. See `ebnf-style-database' documentation. \(fn NAME)" t nil) (autoload 'ebnf-merge-style "ebnf2ps" "\ Merge values of style NAME with style VALUES. See `ebnf-style-database' documentation. \(fn NAME &rest VALUES)" t nil) (autoload 'ebnf-apply-style "ebnf2ps" "\ Set STYLE as the current style. Returns the old style symbol. See `ebnf-style-database' documentation. \(fn STYLE)" t nil) (autoload 'ebnf-reset-style "ebnf2ps" "\ Reset current style. Returns the old style symbol. See `ebnf-style-database' documentation. \(fn &optional STYLE)" t nil) (autoload 'ebnf-push-style "ebnf2ps" "\ Push the current style onto a stack and set STYLE as the current style. Returns the old style symbol. See also `ebnf-pop-style'. See `ebnf-style-database' documentation. \(fn &optional STYLE)" t nil) (autoload 'ebnf-pop-style "ebnf2ps" "\ Pop a style from the stack of pushed styles and set it as the current style. Returns the old style symbol. See also `ebnf-push-style'. See `ebnf-style-database' documentation. \(fn)" t nil) ;;;*** ;;;### (autoloads (ebrowse-statistics ebrowse-save-tree-as ebrowse-save-tree ;;;;;; ebrowse-electric-position-menu ebrowse-forward-in-position-stack ;;;;;; ebrowse-back-in-position-stack ebrowse-tags-search-member-use ;;;;;; ebrowse-tags-query-replace ebrowse-tags-search ebrowse-tags-loop-continue ;;;;;; ebrowse-tags-complete-symbol ebrowse-tags-find-definition-other-frame ;;;;;; ebrowse-tags-view-definition-other-frame ebrowse-tags-find-declaration-other-frame ;;;;;; ebrowse-tags-find-definition-other-window ebrowse-tags-view-definition-other-window ;;;;;; ebrowse-tags-find-declaration-other-window ebrowse-tags-find-definition ;;;;;; ebrowse-tags-view-definition ebrowse-tags-find-declaration ;;;;;; ebrowse-tags-view-declaration ebrowse-member-mode ebrowse-electric-choose-tree ;;;;;; ebrowse-tree-mode) "ebrowse" "progmodes/ebrowse.el" (19259 ;;;;;; 35413)) ;;; Generated autoloads from progmodes/ebrowse.el (autoload 'ebrowse-tree-mode "ebrowse" "\ Major mode for Ebrowse class tree buffers. Each line corresponds to a class in a class tree. Letters do not insert themselves, they are commands. File operations in the tree buffer work on class tree data structures. E.g.\\[save-buffer] writes the tree to the file it was loaded from. Tree mode key bindings: \\{ebrowse-tree-mode-map} \(fn)" t nil) (autoload 'ebrowse-electric-choose-tree "ebrowse" "\ Return a buffer containing a tree or nil if no tree found or canceled. \(fn)" t nil) (autoload 'ebrowse-member-mode "ebrowse" "\ Major mode for Ebrowse member buffers. \\{ebrowse-member-mode-map} \(fn)" nil nil) (autoload 'ebrowse-tags-view-declaration "ebrowse" "\ View declaration of member at point. \(fn)" t nil) (autoload 'ebrowse-tags-find-declaration "ebrowse" "\ Find declaration of member at point. \(fn)" t nil) (autoload 'ebrowse-tags-view-definition "ebrowse" "\ View definition of member at point. \(fn)" t nil) (autoload 'ebrowse-tags-find-definition "ebrowse" "\ Find definition of member at point. \(fn)" t nil) (autoload 'ebrowse-tags-find-declaration-other-window "ebrowse" "\ Find declaration of member at point in other window. \(fn)" t nil) (autoload 'ebrowse-tags-view-definition-other-window "ebrowse" "\ View definition of member at point in other window. \(fn)" t nil) (autoload 'ebrowse-tags-find-definition-other-window "ebrowse" "\ Find definition of member at point in other window. \(fn)" t nil) (autoload 'ebrowse-tags-find-declaration-other-frame "ebrowse" "\ Find definition of member at point in other frame. \(fn)" t nil) (autoload 'ebrowse-tags-view-definition-other-frame "ebrowse" "\ View definition of member at point in other frame. \(fn)" t nil) (autoload 'ebrowse-tags-find-definition-other-frame "ebrowse" "\ Find definition of member at point in other frame. \(fn)" t nil) (autoload 'ebrowse-tags-complete-symbol "ebrowse" "\ Perform completion on the C++ symbol preceding point. A second call of this function without changing point inserts the next match. A call with prefix PREFIX reads the symbol to insert from the minibuffer with completion. \(fn PREFIX)" t nil) (autoload 'ebrowse-tags-loop-continue "ebrowse" "\ Repeat last operation on files in tree. FIRST-TIME non-nil means this is not a repetition, but the first time. TREE-BUFFER if indirectly specifies which files to loop over. \(fn &optional FIRST-TIME TREE-BUFFER)" t nil) (autoload 'ebrowse-tags-search "ebrowse" "\ Search for REGEXP in all files in a tree. If marked classes exist, process marked classes, only. If regular expression is nil, repeat last search. \(fn REGEXP)" t nil) (autoload 'ebrowse-tags-query-replace "ebrowse" "\ Query replace FROM with TO in all files of a class tree. With prefix arg, process files of marked classes only. \(fn FROM TO)" t nil) (autoload 'ebrowse-tags-search-member-use "ebrowse" "\ Search for call sites of a member. If FIX-NAME is specified, search uses of that member. Otherwise, read a member name from the minibuffer. Searches in all files mentioned in a class tree for something that looks like a function call to the member. \(fn &optional FIX-NAME)" t nil) (autoload 'ebrowse-back-in-position-stack "ebrowse" "\ Move backward in the position stack. Prefix arg ARG says how much. \(fn ARG)" t nil) (autoload 'ebrowse-forward-in-position-stack "ebrowse" "\ Move forward in the position stack. Prefix arg ARG says how much. \(fn ARG)" t nil) (autoload 'ebrowse-electric-position-menu "ebrowse" "\ List positions in the position stack in an electric buffer. \(fn)" t nil) (autoload 'ebrowse-save-tree "ebrowse" "\ Save current tree in same file it was loaded from. \(fn)" t nil) (autoload 'ebrowse-save-tree-as "ebrowse" "\ Write the current tree data structure to a file. Read the file name from the minibuffer if interactive. Otherwise, FILE-NAME specifies the file to save the tree in. \(fn &optional FILE-NAME)" t nil) (autoload 'ebrowse-statistics "ebrowse" "\ Display statistics for a class tree. \(fn)" t nil) ;;;*** ;;;### (autoloads (electric-buffer-list) "ebuff-menu" "ebuff-menu.el" ;;;;;; (19259 35413)) ;;; Generated autoloads from ebuff-menu.el (autoload 'electric-buffer-list "ebuff-menu" "\ Pop up a buffer describing the set of Emacs buffers. Vaguely like ITS lunar select buffer; combining typeoutoid buffer listing with menuoid buffer selection. If the very next character typed is a space then the buffer list window disappears. Otherwise, one may move around in the buffer list window, marking buffers to be selected, saved or deleted. To exit and select a new buffer, type a space when the cursor is on the appropriate line of the buffer-list window. Other commands are much like those of `Buffer-menu-mode'. Run hooks in `electric-buffer-menu-mode-hook' on entry. \\{electric-buffer-menu-mode-map} \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (Electric-command-history-redo-expression) "echistory" ;;;;;; "echistory.el" (19259 35413)) ;;; Generated autoloads from echistory.el (autoload 'Electric-command-history-redo-expression "echistory" "\ Edit current history line in minibuffer and execute result. With prefix arg NOCONFIRM, execute current line as-is without editing. \(fn &optional NOCONFIRM)" t nil) ;;;*** ;;;### (autoloads (ecomplete-setup) "ecomplete" "gnus/ecomplete.el" ;;;;;; (19259 35413)) ;;; Generated autoloads from gnus/ecomplete.el (autoload 'ecomplete-setup "ecomplete" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads (global-ede-mode) "ede" "cedet/ede.el" (19259 35413)) ;;; Generated autoloads from cedet/ede.el (defvar global-ede-mode nil "\ Non-nil if Global-Ede mode is enabled. See the command `global-ede-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-ede-mode'.") (custom-autoload 'global-ede-mode "ede" nil) (autoload 'global-ede-mode "ede" "\ Toggle global EDE (Emacs Development Environment) mode. With non-nil argument ARG, enable global EDE mode if ARG is positive; otherwise, disable it. This global minor mode enables `ede-minor-mode' in all buffers in an EDE controlled project. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (edebug-all-forms edebug-all-defs edebug-eval-top-level-form ;;;;;; edebug-basic-spec edebug-all-forms edebug-all-defs) "edebug" ;;;;;; "emacs-lisp/edebug.el" (19259 35413)) ;;; Generated autoloads from emacs-lisp/edebug.el (defvar edebug-all-defs nil "\ If non-nil, evaluating defining forms instruments for Edebug. This applies to `eval-defun', `eval-region', `eval-buffer', and `eval-current-buffer'. `eval-region' is also called by `eval-last-sexp', and `eval-print-last-sexp'. You can use the command `edebug-all-defs' to toggle the value of this variable. You may wish to make it local to each buffer with \(make-local-variable 'edebug-all-defs) in your `emacs-lisp-mode-hook'.") (custom-autoload 'edebug-all-defs "edebug" t) (defvar edebug-all-forms nil "\ Non-nil means evaluation of all forms will instrument for Edebug. This doesn't apply to loading or evaluations in the minibuffer. Use the command `edebug-all-forms' to toggle the value of this option.") (custom-autoload 'edebug-all-forms "edebug" t) (autoload 'edebug-basic-spec "edebug" "\ Return t if SPEC uses only extant spec symbols. An extant spec symbol is a symbol that is not a function and has a `edebug-form-spec' property. \(fn SPEC)" nil nil) (defalias 'edebug-defun 'edebug-eval-top-level-form) (autoload 'edebug-eval-top-level-form "edebug" "\ Evaluate the top level form point is in, stepping through with Edebug. This is like `eval-defun' except that it steps the code for Edebug before evaluating it. It displays the value in the echo area using `eval-expression' (which see). If you do this on a function definition such as a defun or defmacro, it defines the function and instruments its definition for Edebug, so it will do Edebug stepping when called later. It displays `Edebug: FUNCTION' in the echo area to indicate that FUNCTION is now instrumented for Edebug. If the current defun is actually a call to `defvar' or `defcustom', evaluating it this way resets the variable using its initial value expression even if the variable already has some other value. \(Normally `defvar' and `defcustom' do not alter the value if there already is one.) \(fn)" t nil) (autoload 'edebug-all-defs "edebug" "\ Toggle edebugging of all definitions. \(fn)" t nil) (autoload 'edebug-all-forms "edebug" "\ Toggle edebugging of all forms. \(fn)" t nil) ;;;*** ;;;### (autoloads (ediff-documentation ediff-version ediff-revision ;;;;;; ediff-patch-buffer ediff-patch-file ediff-merge-revisions-with-ancestor ;;;;;; ediff-merge-revisions ediff-merge-buffers-with-ancestor ediff-merge-buffers ;;;;;; ediff-merge-files-with-ancestor ediff-merge-files ediff-regions-linewise ;;;;;; ediff-regions-wordwise ediff-windows-linewise ediff-windows-wordwise ;;;;;; ediff-merge-directory-revisions-with-ancestor ediff-merge-directory-revisions ;;;;;; ediff-merge-directories-with-ancestor ediff-merge-directories ;;;;;; ediff-directories3 ediff-directory-revisions ediff-directories ;;;;;; ediff-buffers3 ediff-buffers ediff-backup ediff-current-file ;;;;;; ediff-files3 ediff-files) "ediff" "ediff.el" (19259 35413)) ;;; Generated autoloads from ediff.el (autoload 'ediff-files "ediff" "\ Run Ediff on a pair of files, FILE-A and FILE-B. \(fn FILE-A FILE-B &optional STARTUP-HOOKS)" t nil) (autoload 'ediff-files3 "ediff" "\ Run Ediff on three files, FILE-A, FILE-B, and FILE-C. \(fn FILE-A FILE-B FILE-C &optional STARTUP-HOOKS)" t nil) (defalias 'ediff3 'ediff-files3) (defalias 'ediff 'ediff-files) (autoload 'ediff-current-file "ediff" "\ Start ediff between current buffer and its file on disk. This command can be used instead of `revert-buffer'. If there is nothing to revert then this command fails. \(fn)" t nil) (autoload 'ediff-backup "ediff" "\ Run Ediff on FILE and its backup file. Uses the latest backup, if there are several numerical backups. If this file is a backup, `ediff' it with its original. \(fn FILE)" t nil) (autoload 'ediff-buffers "ediff" "\ Run Ediff on a pair of buffers, BUFFER-A and BUFFER-B. \(fn BUFFER-A BUFFER-B &optional STARTUP-HOOKS JOB-NAME)" t nil) (defalias 'ebuffers 'ediff-buffers) (autoload 'ediff-buffers3 "ediff" "\ Run Ediff on three buffers, BUFFER-A, BUFFER-B, and BUFFER-C. \(fn BUFFER-A BUFFER-B BUFFER-C &optional STARTUP-HOOKS JOB-NAME)" t nil) (defalias 'ebuffers3 'ediff-buffers3) (autoload 'ediff-directories "ediff" "\ Run Ediff on a pair of directories, DIR1 and DIR2, comparing files that have the same name in both. The third argument, REGEXP, is nil or a regular expression; only file names that match the regexp are considered. \(fn DIR1 DIR2 REGEXP)" t nil) (defalias 'edirs 'ediff-directories) (autoload 'ediff-directory-revisions "ediff" "\ Run Ediff on a directory, DIR1, comparing its files with their revisions. The second argument, REGEXP, is a regular expression that filters the file names. Only the files that are under revision control are taken into account. \(fn DIR1 REGEXP)" t nil) (defalias 'edir-revisions 'ediff-directory-revisions) (autoload 'ediff-directories3 "ediff" "\ Run Ediff on three directories, DIR1, DIR2, and DIR3, comparing files that have the same name in all three. The last argument, REGEXP, is nil or a regular expression; only file names that match the regexp are considered. \(fn DIR1 DIR2 DIR3 REGEXP)" t nil) (defalias 'edirs3 'ediff-directories3) (autoload 'ediff-merge-directories "ediff" "\ Run Ediff on a pair of directories, DIR1 and DIR2, merging files that have the same name in both. The third argument, REGEXP, is nil or a regular expression; only file names that match the regexp are considered. \(fn DIR1 DIR2 REGEXP &optional MERGE-AUTOSTORE-DIR)" t nil) (defalias 'edirs-merge 'ediff-merge-directories) (autoload 'ediff-merge-directories-with-ancestor "ediff" "\ Merge files in directories DIR1 and DIR2 using files in ANCESTOR-DIR as ancestors. Ediff merges files that have identical names in DIR1, DIR2. If a pair of files in DIR1 and DIR2 doesn't have an ancestor in ANCESTOR-DIR, Ediff will merge without ancestor. The fourth argument, REGEXP, is nil or a regular expression; only file names that match the regexp are considered. \(fn DIR1 DIR2 ANCESTOR-DIR REGEXP &optional MERGE-AUTOSTORE-DIR)" t nil) (autoload 'ediff-merge-directory-revisions "ediff" "\ Run Ediff on a directory, DIR1, merging its files with their revisions. The second argument, REGEXP, is a regular expression that filters the file names. Only the files that are under revision control are taken into account. \(fn DIR1 REGEXP &optional MERGE-AUTOSTORE-DIR)" t nil) (defalias 'edir-merge-revisions 'ediff-merge-directory-revisions) (autoload 'ediff-merge-directory-revisions-with-ancestor "ediff" "\ Run Ediff on a directory, DIR1, merging its files with their revisions and ancestors. The second argument, REGEXP, is a regular expression that filters the file names. Only the files that are under revision control are taken into account. \(fn DIR1 REGEXP &optional MERGE-AUTOSTORE-DIR)" t nil) (defalias 'edir-merge-revisions-with-ancestor 'ediff-merge-directory-revisions-with-ancestor) (defalias 'edirs-merge-with-ancestor 'ediff-merge-directories-with-ancestor) (autoload 'ediff-windows-wordwise "ediff" "\ Compare WIND-A and WIND-B, which are selected by clicking, wordwise. With prefix argument, DUMB-MODE, or on a non-windowing display, works as follows: If WIND-A is nil, use selected window. If WIND-B is nil, use window next to WIND-A. \(fn DUMB-MODE &optional WIND-A WIND-B STARTUP-HOOKS)" t nil) (autoload 'ediff-windows-linewise "ediff" "\ Compare WIND-A and WIND-B, which are selected by clicking, linewise. With prefix argument, DUMB-MODE, or on a non-windowing display, works as follows: If WIND-A is nil, use selected window. If WIND-B is nil, use window next to WIND-A. \(fn DUMB-MODE &optional WIND-A WIND-B STARTUP-HOOKS)" t nil) (autoload 'ediff-regions-wordwise "ediff" "\ Run Ediff on a pair of regions in specified buffers. Regions (i.e., point and mark) can be set in advance or marked interactively. This function is effective only for relatively small regions, up to 200 lines. For large regions, use `ediff-regions-linewise'. \(fn BUFFER-A BUFFER-B &optional STARTUP-HOOKS)" t nil) (autoload 'ediff-regions-linewise "ediff" "\ Run Ediff on a pair of regions in specified buffers. Regions (i.e., point and mark) can be set in advance or marked interactively. Each region is enlarged to contain full lines. This function is effective for large regions, over 100-200 lines. For small regions, use `ediff-regions-wordwise'. \(fn BUFFER-A BUFFER-B &optional STARTUP-HOOKS)" t nil) (defalias 'ediff-merge 'ediff-merge-files) (autoload 'ediff-merge-files "ediff" "\ Merge two files without ancestor. \(fn FILE-A FILE-B &optional STARTUP-HOOKS MERGE-BUFFER-FILE)" t nil) (autoload 'ediff-merge-files-with-ancestor "ediff" "\ Merge two files with ancestor. \(fn FILE-A FILE-B FILE-ANCESTOR &optional STARTUP-HOOKS MERGE-BUFFER-FILE)" t nil) (defalias 'ediff-merge-with-ancestor 'ediff-merge-files-with-ancestor) (autoload 'ediff-merge-buffers "ediff" "\ Merge buffers without ancestor. \(fn BUFFER-A BUFFER-B &optional STARTUP-HOOKS JOB-NAME MERGE-BUFFER-FILE)" t nil) (autoload 'ediff-merge-buffers-with-ancestor "ediff" "\ Merge buffers with ancestor. \(fn BUFFER-A BUFFER-B BUFFER-ANCESTOR &optional STARTUP-HOOKS JOB-NAME MERGE-BUFFER-FILE)" t nil) (autoload 'ediff-merge-revisions "ediff" "\ Run Ediff by merging two revisions of a file. The file is the optional FILE argument or the file visited by the current buffer. \(fn &optional FILE STARTUP-HOOKS MERGE-BUFFER-FILE)" t nil) (autoload 'ediff-merge-revisions-with-ancestor "ediff" "\ Run Ediff by merging two revisions of a file with a common ancestor. The file is the optional FILE argument or the file visited by the current buffer. \(fn &optional FILE STARTUP-HOOKS MERGE-BUFFER-FILE)" t nil) (autoload 'ediff-patch-file "ediff" "\ Run Ediff by patching SOURCE-FILENAME. If optional PATCH-BUF is given, use the patch in that buffer and don't ask the user. If prefix argument, then: if even argument, assume that the patch is in a buffer. If odd -- assume it is in a file. \(fn &optional ARG PATCH-BUF)" t nil) (autoload 'ediff-patch-buffer "ediff" "\ Run Ediff by patching the buffer specified at prompt. Without the optional prefix ARG, asks if the patch is in some buffer and prompts for the buffer or a file, depending on the answer. With ARG=1, assumes the patch is in a file and prompts for the file. With ARG=2, assumes the patch is in a buffer and prompts for the buffer. PATCH-BUF is an optional argument, which specifies the buffer that contains the patch. If not given, the user is prompted according to the prefix argument. \(fn &optional ARG PATCH-BUF)" t nil) (defalias 'epatch 'ediff-patch-file) (defalias 'epatch-buffer 'ediff-patch-buffer) (autoload 'ediff-revision "ediff" "\ Run Ediff by comparing versions of a file. The file is an optional FILE argument or the file entered at the prompt. Default: the file visited by the current buffer. Uses `vc.el' or `rcs.el' depending on `ediff-version-control-package'. \(fn &optional FILE STARTUP-HOOKS)" t nil) (defalias 'erevision 'ediff-revision) (autoload 'ediff-version "ediff" "\ Return string describing the version of Ediff. When called interactively, displays the version. \(fn)" t nil) (autoload 'ediff-documentation "ediff" "\ Display Ediff's manual. With optional NODE, goes to that node. \(fn &optional NODE)" t nil) ;;;*** ;;;### (autoloads (ediff-customize) "ediff-help" "ediff-help.el" ;;;;;; (19259 35413)) ;;; Generated autoloads from ediff-help.el (autoload 'ediff-customize "ediff-help" "\ Not documented \(fn)" t nil) ;;;*** ;;;### (autoloads (ediff-show-registry) "ediff-mult" "ediff-mult.el" ;;;;;; (19259 35413)) ;;; Generated autoloads from ediff-mult.el (autoload 'ediff-show-registry "ediff-mult" "\ Display Ediff's registry. \(fn)" t nil) (defalias 'eregistry 'ediff-show-registry) ;;;*** ;;;### (autoloads (ediff-toggle-use-toolbar ediff-toggle-multiframe) ;;;;;; "ediff-util" "ediff-util.el" (19259 35413)) ;;; Generated autoloads from ediff-util.el (autoload 'ediff-toggle-multiframe "ediff-util" "\ Switch from multiframe display to single-frame display and back. To change the default, set the variable `ediff-window-setup-function', which see. \(fn)" t nil) (autoload 'ediff-toggle-use-toolbar "ediff-util" "\ Enable or disable Ediff toolbar. Works only in versions of Emacs that support toolbars. To change the default, set the variable `ediff-use-toolbar-p', which see. \(fn)" t nil) ;;;*** ;;;### (autoloads (format-kbd-macro read-kbd-macro edit-named-kbd-macro ;;;;;; edit-last-kbd-macro edit-kbd-macro) "edmacro" "edmacro.el" ;;;;;; (19259 35414)) ;;; Generated autoloads from edmacro.el (defvar edmacro-eight-bits nil "\ *Non-nil if `edit-kbd-macro' should leave 8-bit characters intact. Default nil means to write characters above \\177 in octal notation.") (autoload 'edit-kbd-macro "edmacro" "\ Edit a keyboard macro. At the prompt, type any key sequence which is bound to a keyboard macro. Or, type `C-x e' or RET to edit the last keyboard macro, `C-h l' to edit the last 300 keystrokes as a keyboard macro, or `M-x' to edit a macro by its command name. With a prefix argument, format the macro in a more concise way. \(fn KEYS &optional PREFIX FINISH-HOOK STORE-HOOK)" t nil) (autoload 'edit-last-kbd-macro "edmacro" "\ Edit the most recently defined keyboard macro. \(fn &optional PREFIX)" t nil) (autoload 'edit-named-kbd-macro "edmacro" "\ Edit a keyboard macro which has been given a name by `name-last-kbd-macro'. \(fn &optional PREFIX)" t nil) (autoload 'read-kbd-macro "edmacro" "\ Read the region as a keyboard macro definition. The region is interpreted as spelled-out keystrokes, e.g., \"M-x abc RET\". See documentation for `edmacro-mode' for details. Leading/trailing \"C-x (\" and \"C-x )\" in the text are allowed and ignored. The resulting macro is installed as the \"current\" keyboard macro. In Lisp, may also be called with a single STRING argument in which case the result is returned rather than being installed as the current macro. The result will be a string if possible, otherwise an event vector. Second argument NEED-VECTOR means to return an event vector always. \(fn START &optional END)" t nil) (autoload 'format-kbd-macro "edmacro" "\ Return the keyboard macro MACRO as a human-readable string. This string is suitable for passing to `read-kbd-macro'. Second argument VERBOSE means to put one command per line with comments. If VERBOSE is `1', put everything on one line. If VERBOSE is omitted or nil, use a compact 80-column format. \(fn &optional MACRO VERBOSE)" nil nil) ;;;*** ;;;### (autoloads (edt-emulation-on edt-set-scroll-margins) "edt" ;;;;;; "emulation/edt.el" (19259 35414)) ;;; Generated autoloads from emulation/edt.el (autoload 'edt-set-scroll-margins "edt" "\ Set scroll margins. Argument TOP is the top margin in number of lines or percent of window. Argument BOTTOM is the bottom margin in number of lines or percent of window. \(fn TOP BOTTOM)" t nil) (autoload 'edt-emulation-on "edt" "\ Turn on EDT Emulation. \(fn)" t nil) ;;;*** ;;;### (autoloads (electric-helpify with-electric-help) "ehelp" "ehelp.el" ;;;;;; (19259 35414)) ;;; Generated autoloads from ehelp.el (autoload 'with-electric-help "ehelp" "\ Pop up an \"electric\" help buffer. THUNK is a function of no arguments which is called to initialize the contents of BUFFER. BUFFER defaults to `*Help*'. BUFFER will be erased before THUNK is called unless NOERASE is non-nil. THUNK will be called while BUFFER is current and with `standard-output' bound to the buffer specified by BUFFER. If THUNK returns nil, we display BUFFER starting at the top, and shrink the window to fit. If THUNK returns non-nil, we don't do those things. After THUNK has been called, this function \"electrically\" pops up a window in which BUFFER is displayed and allows the user to scroll through that buffer in `electric-help-mode'. The window's height will be at least MINHEIGHT if this value is non-nil. If THUNK returns nil, we display BUFFER starting at the top, and shrink the window to fit if `electric-help-shrink-window' is non-nil. If THUNK returns non-nil, we don't do those things. When the user exits (with `electric-help-exit', or otherwise), the help buffer's window disappears (i.e., we use `save-window-excursion'), and BUFFER is put into default `major-mode' (or `fundamental-mode'). \(fn THUNK &optional BUFFER NOERASE MINHEIGHT)" nil nil) (autoload 'electric-helpify "ehelp" "\ Not documented \(fn FUN &optional NAME)" nil nil) ;;;*** ;;;### (autoloads (turn-on-eldoc-mode eldoc-mode eldoc-minor-mode-string) ;;;;;; "eldoc" "emacs-lisp/eldoc.el" (19259 35414)) ;;; Generated autoloads from emacs-lisp/eldoc.el (defvar eldoc-minor-mode-string (purecopy " ElDoc") "\ String to display in mode line when ElDoc Mode is enabled; nil for none.") (custom-autoload 'eldoc-minor-mode-string "eldoc" t) (autoload 'eldoc-mode "eldoc" "\ Toggle ElDoc mode on or off. In ElDoc mode, the echo area displays information about a function or variable in the text where point is. If point is on a documented variable, it displays the first line of that variable's doc string. Otherwise it displays the argument list of the function called in the expression point is on. With prefix ARG, turn ElDoc mode on if and only if ARG is positive. \(fn &optional ARG)" t nil) (autoload 'turn-on-eldoc-mode "eldoc" "\ Unequivocally turn on ElDoc mode (see command `eldoc-mode'). \(fn)" t nil) (defvar eldoc-documentation-function nil "\ If non-nil, function to call to return doc string. The function of no args should return a one-line string for displaying doc about a function etc. appropriate to the context around point. It should return nil if there's no doc appropriate for the context. Typically doc is returned if point is on a function-like name or in its arg list. The result is used as is, so the function must explicitly handle the variables `eldoc-argument-case' and `eldoc-echo-area-use-multiline-p', and the face `eldoc-highlight-function-argument', if they are to have any effect. This variable is expected to be made buffer-local by modes (other than Emacs Lisp mode) that support ElDoc.") ;;;*** ;;;### (autoloads (elide-head) "elide-head" "elide-head.el" (19259 ;;;;;; 35414)) ;;; Generated autoloads from elide-head.el (autoload 'elide-head "elide-head" "\ Hide header material in buffer according to `elide-head-headers-to-hide'. The header is made invisible with an overlay. With a prefix arg, show an elided material again. This is suitable as an entry on `find-file-hook' or appropriate mode hooks. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (elint-initialize elint-defun elint-current-buffer ;;;;;; elint-directory elint-file) "elint" "emacs-lisp/elint.el" ;;;;;; (19259 35414)) ;;; Generated autoloads from emacs-lisp/elint.el (autoload 'elint-file "elint" "\ Lint the file FILE. \(fn FILE)" t nil) (autoload 'elint-directory "elint" "\ Lint all the .el files in DIRECTORY. A complicated directory may require a lot of memory. \(fn DIRECTORY)" t nil) (autoload 'elint-current-buffer "elint" "\ Lint the current buffer. If necessary, this first calls `elint-initalize'. \(fn)" t nil) (autoload 'elint-defun "elint" "\ Lint the function at point. If necessary, this first calls `elint-initalize'. \(fn)" t nil) (autoload 'elint-initialize "elint" "\ Initialize elint. If elint is already initialized, this does nothing, unless optional prefix argument REINIT is non-nil. \(fn &optional REINIT)" t nil) ;;;*** ;;;### (autoloads (elp-results elp-instrument-package elp-instrument-list ;;;;;; elp-instrument-function) "elp" "emacs-lisp/elp.el" (19259 ;;;;;; 35414)) ;;; Generated autoloads from emacs-lisp/elp.el (autoload 'elp-instrument-function "elp" "\ Instrument FUNSYM for profiling. FUNSYM must be a symbol of a defined function. \(fn FUNSYM)" t nil) (autoload 'elp-instrument-list "elp" "\ Instrument, for profiling, all functions in `elp-function-list'. Use optional LIST if provided instead. If called interactively, read LIST using the minibuffer. \(fn &optional LIST)" t nil) (autoload 'elp-instrument-package "elp" "\ Instrument for profiling, all functions which start with PREFIX. For example, to instrument all ELP functions, do the following: \\[elp-instrument-package] RET elp- RET \(fn PREFIX)" t nil) (autoload 'elp-results "elp" "\ Display current profiling results. If `elp-reset-after-results' is non-nil, then current profiling information for all instrumented functions is reset after results are displayed. \(fn)" t nil) ;;;*** ;;;### (autoloads (report-emacs-bug) "emacsbug" "mail/emacsbug.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from mail/emacsbug.el (autoload 'report-emacs-bug "emacsbug" "\ Report a bug in GNU Emacs. Prompts for bug subject. Leaves you in a mail buffer. \(fn TOPIC &optional RECENT-KEYS)" t nil) ;;;*** ;;;### (autoloads (emerge-merge-directories emerge-revisions-with-ancestor ;;;;;; emerge-revisions emerge-files-with-ancestor-remote emerge-files-remote ;;;;;; emerge-files-with-ancestor-command emerge-files-command emerge-buffers-with-ancestor ;;;;;; emerge-buffers emerge-files-with-ancestor emerge-files) "emerge" ;;;;;; "emerge.el" (19259 35415)) ;;; Generated autoloads from emerge.el (autoload 'emerge-files "emerge" "\ Run Emerge on two files. \(fn ARG FILE-A FILE-B FILE-OUT &optional STARTUP-HOOKS QUIT-HOOKS)" t nil) (autoload 'emerge-files-with-ancestor "emerge" "\ Run Emerge on two files, giving another file as the ancestor. \(fn ARG FILE-A FILE-B FILE-ANCESTOR FILE-OUT &optional STARTUP-HOOKS QUIT-HOOKS)" t nil) (autoload 'emerge-buffers "emerge" "\ Run Emerge on two buffers. \(fn BUFFER-A BUFFER-B &optional STARTUP-HOOKS QUIT-HOOKS)" t nil) (autoload 'emerge-buffers-with-ancestor "emerge" "\ Run Emerge on two buffers, giving another buffer as the ancestor. \(fn BUFFER-A BUFFER-B BUFFER-ANCESTOR &optional STARTUP-HOOKS QUIT-HOOKS)" t nil) (autoload 'emerge-files-command "emerge" "\ Not documented \(fn)" nil nil) (autoload 'emerge-files-with-ancestor-command "emerge" "\ Not documented \(fn)" nil nil) (autoload 'emerge-files-remote "emerge" "\ Not documented \(fn FILE-A FILE-B FILE-OUT)" nil nil) (autoload 'emerge-files-with-ancestor-remote "emerge" "\ Not documented \(fn FILE-A FILE-B FILE-ANC FILE-OUT)" nil nil) (autoload 'emerge-revisions "emerge" "\ Emerge two RCS revisions of a file. \(fn ARG FILE REVISION-A REVISION-B &optional STARTUP-HOOKS QUIT-HOOKS)" t nil) (autoload 'emerge-revisions-with-ancestor "emerge" "\ Emerge two RCS revisions of a file, with another revision as ancestor. \(fn ARG FILE REVISION-A REVISION-B ANCESTOR &optional STARTUP-HOOKS QUIT-HOOKS)" t nil) (autoload 'emerge-merge-directories "emerge" "\ Not documented \(fn A-DIR B-DIR ANCESTOR-DIR OUTPUT-DIR)" t nil) ;;;*** ;;;### (autoloads (enriched-decode enriched-encode enriched-mode) ;;;;;; "enriched" "textmodes/enriched.el" (19259 35415)) ;;; Generated autoloads from textmodes/enriched.el (autoload 'enriched-mode "enriched" "\ Minor mode for editing text/enriched files. These are files with embedded formatting information in the MIME standard text/enriched format. Turning the mode on or off runs `enriched-mode-hook'. More information about Enriched mode is available in the file etc/enriched.doc in the Emacs distribution directory. Commands: \\{enriched-mode-map} \(fn &optional ARG)" t nil) (autoload 'enriched-encode "enriched" "\ Not documented \(fn FROM TO ORIG-BUF)" nil nil) (autoload 'enriched-decode "enriched" "\ Not documented \(fn FROM TO)" nil nil) ;;;*** ;;;### (autoloads (epa-insert-keys epa-export-keys epa-import-armor-in-region ;;;;;; epa-import-keys-region epa-import-keys epa-delete-keys epa-encrypt-region ;;;;;; epa-sign-region epa-verify-cleartext-in-region epa-verify-region ;;;;;; epa-decrypt-armor-in-region epa-decrypt-region epa-encrypt-file ;;;;;; epa-sign-file epa-verify-file epa-decrypt-file epa-select-keys ;;;;;; epa-list-secret-keys epa-list-keys) "epa" "epa.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from epa.el (autoload 'epa-list-keys "epa" "\ List all keys matched with NAME from the public keyring. \(fn &optional NAME)" t nil) (autoload 'epa-list-secret-keys "epa" "\ List all keys matched with NAME from the private keyring. \(fn &optional NAME)" t nil) (autoload 'epa-select-keys "epa" "\ Display a user's keyring and ask him to select keys. CONTEXT is an epg-context. PROMPT is a string to prompt with. NAMES is a list of strings to be matched with keys. If it is nil, all the keys are listed. If SECRET is non-nil, list secret keys instead of public keys. \(fn CONTEXT PROMPT &optional NAMES SECRET)" nil nil) (autoload 'epa-decrypt-file "epa" "\ Decrypt FILE. \(fn FILE)" t nil) (autoload 'epa-verify-file "epa" "\ Verify FILE. \(fn FILE)" t nil) (autoload 'epa-sign-file "epa" "\ Sign FILE by SIGNERS keys selected. \(fn FILE SIGNERS MODE)" t nil) (autoload 'epa-encrypt-file "epa" "\ Encrypt FILE for RECIPIENTS. \(fn FILE RECIPIENTS)" t nil) (autoload 'epa-decrypt-region "epa" "\ Decrypt the current region between START and END. Don't use this command in Lisp programs! Since this function operates on regions, it does some tricks such as coding-system detection and unibyte/multibyte conversion. If you are sure how the data in the region should be treated, you should consider using the string based counterpart `epg-decrypt-string', or the file based counterpart `epg-decrypt-file' instead. For example: \(let ((context (epg-make-context 'OpenPGP))) (decode-coding-string (epg-decrypt-string context (buffer-substring start end)) 'utf-8)) \(fn START END)" t nil) (autoload 'epa-decrypt-armor-in-region "epa" "\ Decrypt OpenPGP armors in the current region between START and END. Don't use this command in Lisp programs! See the reason described in the `epa-decrypt-region' documentation. \(fn START END)" t nil) (autoload 'epa-verify-region "epa" "\ Verify the current region between START and END. Don't use this command in Lisp programs! Since this function operates on regions, it does some tricks such as coding-system detection and unibyte/multibyte conversion. If you are sure how the data in the region should be treated, you should consider using the string based counterpart `epg-verify-string', or the file based counterpart `epg-verify-file' instead. For example: \(let ((context (epg-make-context 'OpenPGP))) (decode-coding-string (epg-verify-string context (buffer-substring start end)) 'utf-8)) \(fn START END)" t nil) (autoload 'epa-verify-cleartext-in-region "epa" "\ Verify OpenPGP cleartext signed messages in the current region between START and END. Don't use this command in Lisp programs! See the reason described in the `epa-verify-region' documentation. \(fn START END)" t nil) (autoload 'epa-sign-region "epa" "\ Sign the current region between START and END by SIGNERS keys selected. Don't use this command in Lisp programs! Since this function operates on regions, it does some tricks such as coding-system detection and unibyte/multibyte conversion. If you are sure how the data should be treated, you should consider using the string based counterpart `epg-sign-string', or the file based counterpart `epg-sign-file' instead. For example: \(let ((context (epg-make-context 'OpenPGP))) (epg-sign-string context (encode-coding-string (buffer-substring start end) 'utf-8))) \(fn START END SIGNERS MODE)" t nil) (autoload 'epa-encrypt-region "epa" "\ Encrypt the current region between START and END for RECIPIENTS. Don't use this command in Lisp programs! Since this function operates on regions, it does some tricks such as coding-system detection and unibyte/multibyte conversion. If you are sure how the data should be treated, you should consider using the string based counterpart `epg-encrypt-string', or the file based counterpart `epg-encrypt-file' instead. For example: \(let ((context (epg-make-context 'OpenPGP))) (epg-encrypt-string context (encode-coding-string (buffer-substring start end) 'utf-8) nil)) \(fn START END RECIPIENTS SIGN SIGNERS)" t nil) (autoload 'epa-delete-keys "epa" "\ Delete selected KEYS. \(fn KEYS &optional ALLOW-SECRET)" t nil) (autoload 'epa-import-keys "epa" "\ Import keys from FILE. \(fn FILE)" t nil) (autoload 'epa-import-keys-region "epa" "\ Import keys from the region. \(fn START END)" t nil) (autoload 'epa-import-armor-in-region "epa" "\ Import keys in the OpenPGP armor format in the current region between START and END. \(fn START END)" t nil) (autoload 'epa-export-keys "epa" "\ Export selected KEYS to FILE. \(fn KEYS FILE)" t nil) (autoload 'epa-insert-keys "epa" "\ Insert selected KEYS after the point. \(fn KEYS)" t nil) ;;;*** ;;;### (autoloads (epa-dired-do-encrypt epa-dired-do-sign epa-dired-do-verify ;;;;;; epa-dired-do-decrypt) "epa-dired" "epa-dired.el" (19259 35415)) ;;; Generated autoloads from epa-dired.el (autoload 'epa-dired-do-decrypt "epa-dired" "\ Decrypt marked files. \(fn)" t nil) (autoload 'epa-dired-do-verify "epa-dired" "\ Verify marked files. \(fn)" t nil) (autoload 'epa-dired-do-sign "epa-dired" "\ Sign marked files. \(fn)" t nil) (autoload 'epa-dired-do-encrypt "epa-dired" "\ Encrypt marked files. \(fn)" t nil) ;;;*** ;;;### (autoloads (epa-file-disable epa-file-enable epa-file-handler) ;;;;;; "epa-file" "epa-file.el" (19259 35415)) ;;; Generated autoloads from epa-file.el (autoload 'epa-file-handler "epa-file" "\ Not documented \(fn OPERATION &rest ARGS)" nil nil) (autoload 'epa-file-enable "epa-file" "\ Not documented \(fn)" t nil) (autoload 'epa-file-disable "epa-file" "\ Not documented \(fn)" t nil) ;;;*** ;;;### (autoloads (epa-global-mail-mode epa-mail-import-keys epa-mail-encrypt ;;;;;; epa-mail-sign epa-mail-verify epa-mail-decrypt epa-mail-mode) ;;;;;; "epa-mail" "epa-mail.el" (19259 35415)) ;;; Generated autoloads from epa-mail.el (autoload 'epa-mail-mode "epa-mail" "\ A minor-mode for composing encrypted/clearsigned mails. \(fn &optional ARG)" t nil) (autoload 'epa-mail-decrypt "epa-mail" "\ Decrypt OpenPGP armors in the current buffer. The buffer is expected to contain a mail message. Don't use this command in Lisp programs! \(fn)" t nil) (autoload 'epa-mail-verify "epa-mail" "\ Verify OpenPGP cleartext signed messages in the current buffer. The buffer is expected to contain a mail message. Don't use this command in Lisp programs! \(fn)" t nil) (autoload 'epa-mail-sign "epa-mail" "\ Sign the current buffer. The buffer is expected to contain a mail message. Don't use this command in Lisp programs! \(fn START END SIGNERS MODE)" t nil) (autoload 'epa-mail-encrypt "epa-mail" "\ Encrypt the current buffer. The buffer is expected to contain a mail message. Don't use this command in Lisp programs! \(fn START END RECIPIENTS SIGN SIGNERS)" t nil) (autoload 'epa-mail-import-keys "epa-mail" "\ Import keys in the OpenPGP armor format in the current buffer. The buffer is expected to contain a mail message. Don't use this command in Lisp programs! \(fn)" t nil) (defvar epa-global-mail-mode nil "\ Non-nil if Epa-Global-Mail mode is enabled. See the command `epa-global-mail-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `epa-global-mail-mode'.") (custom-autoload 'epa-global-mail-mode "epa-mail" nil) (autoload 'epa-global-mail-mode "epa-mail" "\ Minor mode to hook EasyPG into Mail mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (epg-make-context) "epg" "epg.el" (19259 35415)) ;;; Generated autoloads from epg.el (autoload 'epg-make-context "epg" "\ Return a context object. \(fn &optional PROTOCOL ARMOR TEXTMODE INCLUDE-CERTS CIPHER-ALGORITHM DIGEST-ALGORITHM COMPRESS-ALGORITHM)" nil nil) ;;;*** ;;;### (autoloads (epg-expand-group epg-check-configuration epg-configuration) ;;;;;; "epg-config" "epg-config.el" (19259 35415)) ;;; Generated autoloads from epg-config.el (autoload 'epg-configuration "epg-config" "\ Return a list of internal configuration parameters of `epg-gpg-program'. \(fn)" nil nil) (autoload 'epg-check-configuration "epg-config" "\ Verify that a sufficient version of GnuPG is installed. \(fn CONFIG &optional MINIMUM-VERSION)" nil nil) (autoload 'epg-expand-group "epg-config" "\ Look at CONFIG and try to expand GROUP. \(fn CONFIG GROUP)" nil nil) ;;;*** ;;;### (autoloads (erc-handle-irc-url erc erc-select-read-args) "erc" ;;;;;; "erc/erc.el" (19259 35415)) ;;; Generated autoloads from erc/erc.el (autoload 'erc-select-read-args "erc" "\ Prompt the user for values of nick, server, port, and password. \(fn)" nil nil) (autoload 'erc "erc" "\ ERC is a powerful, modular, and extensible IRC client. This function is the main entry point for ERC. It permits you to select connection parameters, and then starts ERC. Non-interactively, it takes the keyword arguments (server (erc-compute-server)) (port (erc-compute-port)) (nick (erc-compute-nick)) password (full-name (erc-compute-full-name))) That is, if called with (erc :server \"irc.freenode.net\" :full-name \"Harry S Truman\") then the server and full-name will be set to those values, whereas `erc-compute-port', `erc-compute-nick' and `erc-compute-full-name' will be invoked for the values of the other parameters. \(fn &key (SERVER (erc-compute-server)) (PORT (erc-compute-port)) (NICK (erc-compute-nick)) PASSWORD (FULL-NAME (erc-compute-full-name)))" t nil) (defalias 'erc-select 'erc) (autoload 'erc-handle-irc-url "erc" "\ Use ERC to IRC on HOST:PORT in CHANNEL as USER with PASSWORD. If ERC is already connected to HOST:PORT, simply /join CHANNEL. Otherwise, connect to HOST:PORT as USER and /join CHANNEL. \(fn HOST PORT CHANNEL USER PASSWORD)" nil nil) ;;;*** ;;;### (autoloads nil "erc-autoaway" "erc/erc-autoaway.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from erc/erc-autoaway.el (autoload 'erc-autoaway-mode "erc-autoaway") ;;;*** ;;;### (autoloads nil "erc-button" "erc/erc-button.el" (19259 35415)) ;;; Generated autoloads from erc/erc-button.el (autoload 'erc-button-mode "erc-button" nil t) ;;;*** ;;;### (autoloads nil "erc-capab" "erc/erc-capab.el" (19259 35415)) ;;; Generated autoloads from erc/erc-capab.el (autoload 'erc-capab-identify-mode "erc-capab" nil t) ;;;*** ;;;### (autoloads nil "erc-compat" "erc/erc-compat.el" (19259 35415)) ;;; Generated autoloads from erc/erc-compat.el (autoload 'erc-define-minor-mode "erc-compat") ;;;*** ;;;### (autoloads (erc-ctcp-query-DCC pcomplete/erc-mode/DCC erc-cmd-DCC) ;;;;;; "erc-dcc" "erc/erc-dcc.el" (19259 35415)) ;;; Generated autoloads from erc/erc-dcc.el (autoload 'erc-dcc-mode "erc-dcc") (autoload 'erc-cmd-DCC "erc-dcc" "\ Parser for /dcc command. This figures out the dcc subcommand and calls the appropriate routine to handle it. The function dispatched should be named \"erc-dcc-do-FOO-command\", where FOO is one of CLOSE, GET, SEND, LIST, CHAT, etc. \(fn CMD &rest ARGS)" nil nil) (autoload 'pcomplete/erc-mode/DCC "erc-dcc" "\ Provides completion for the /DCC command. \(fn)" nil nil) (defvar erc-ctcp-query-DCC-hook '(erc-ctcp-query-DCC) "\ Hook variable for CTCP DCC queries") (autoload 'erc-ctcp-query-DCC "erc-dcc" "\ The function called when a CTCP DCC request is detected by the client. It examines the DCC subcommand, and calls the appropriate routine for that subcommand. \(fn PROC NICK LOGIN HOST TO QUERY)" nil nil) ;;;*** ;;;### (autoloads (erc-ezb-initialize erc-ezb-select-session erc-ezb-select ;;;;;; erc-ezb-add-session erc-ezb-end-of-session-list erc-ezb-init-session-list ;;;;;; erc-ezb-identify erc-ezb-notice-autodetect erc-ezb-lookup-action ;;;;;; erc-ezb-get-login erc-cmd-ezb) "erc-ezbounce" "erc/erc-ezbounce.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-ezbounce.el (autoload 'erc-cmd-ezb "erc-ezbounce" "\ Send EZB commands to the EZBouncer verbatim. \(fn LINE &optional FORCE)" nil nil) (autoload 'erc-ezb-get-login "erc-ezbounce" "\ Return an appropriate EZBounce login for SERVER and PORT. Look up entries in `erc-ezb-login-alist'. If the username or password in the alist is `nil', prompt for the appropriate values. \(fn SERVER PORT)" nil nil) (autoload 'erc-ezb-lookup-action "erc-ezbounce" "\ Not documented \(fn MESSAGE)" nil nil) (autoload 'erc-ezb-notice-autodetect "erc-ezbounce" "\ React on an EZBounce NOTICE request. \(fn PROC PARSED)" nil nil) (autoload 'erc-ezb-identify "erc-ezbounce" "\ Identify to the EZBouncer server. \(fn MESSAGE)" nil nil) (autoload 'erc-ezb-init-session-list "erc-ezbounce" "\ Reset the EZBounce session list to nil. \(fn MESSAGE)" nil nil) (autoload 'erc-ezb-end-of-session-list "erc-ezbounce" "\ Indicate the end of the EZBounce session listing. \(fn MESSAGE)" nil nil) (autoload 'erc-ezb-add-session "erc-ezbounce" "\ Add an EZBounce session to the session list. \(fn MESSAGE)" nil nil) (autoload 'erc-ezb-select "erc-ezbounce" "\ Select an IRC server to use by EZBounce, in ERC style. \(fn MESSAGE)" nil nil) (autoload 'erc-ezb-select-session "erc-ezbounce" "\ Select a detached EZBounce session. \(fn)" nil nil) (autoload 'erc-ezb-initialize "erc-ezbounce" "\ Add EZBouncer convenience functions to ERC. \(fn)" nil nil) ;;;*** ;;;### (autoloads (erc-fill) "erc-fill" "erc/erc-fill.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from erc/erc-fill.el (autoload 'erc-fill-mode "erc-fill" nil t) (autoload 'erc-fill "erc-fill" "\ Fill a region using the function referenced in `erc-fill-function'. You can put this on `erc-insert-modify-hook' and/or `erc-send-modify-hook'. \(fn)" nil nil) ;;;*** ;;;### (autoloads nil "erc-hecomplete" "erc/erc-hecomplete.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from erc/erc-hecomplete.el (autoload 'erc-hecomplete-mode "erc-hecomplete" nil t) ;;;*** ;;;### (autoloads (erc-identd-stop erc-identd-start) "erc-identd" ;;;;;; "erc/erc-identd.el" (19259 35415)) ;;; Generated autoloads from erc/erc-identd.el (autoload 'erc-identd-mode "erc-identd") (autoload 'erc-identd-start "erc-identd" "\ Start an identd server listening to port 8113. Port 113 (auth) will need to be redirected to port 8113 on your machine -- using iptables, or a program like redir which can be run from inetd. The idea is to provide a simple identd server when you need one, without having to install one globally on your system. \(fn &optional PORT)" t nil) (autoload 'erc-identd-stop "erc-identd" "\ Not documented \(fn &rest IGNORE)" t nil) ;;;*** ;;;### (autoloads (erc-create-imenu-index) "erc-imenu" "erc/erc-imenu.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-imenu.el (autoload 'erc-create-imenu-index "erc-imenu" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads nil "erc-join" "erc/erc-join.el" (19259 35415)) ;;; Generated autoloads from erc/erc-join.el (autoload 'erc-autojoin-mode "erc-join" nil t) ;;;*** ;;;### (autoloads nil "erc-list" "erc/erc-list.el" (19259 35415)) ;;; Generated autoloads from erc/erc-list.el (autoload 'erc-list-mode "erc-list") ;;;*** ;;;### (autoloads (erc-save-buffer-in-logs erc-logging-enabled) "erc-log" ;;;;;; "erc/erc-log.el" (19259 35415)) ;;; Generated autoloads from erc/erc-log.el (autoload 'erc-log-mode "erc-log" nil t) (autoload 'erc-logging-enabled "erc-log" "\ Return non-nil if logging is enabled for BUFFER. If BUFFER is nil, the value of `current-buffer' is used. Logging is enabled if `erc-log-channels-directory' is non-nil, the directory is writeable (it will be created as necessary) and `erc-enable-logging' returns a non-nil value. \(fn &optional BUFFER)" nil nil) (autoload 'erc-save-buffer-in-logs "erc-log" "\ Append BUFFER contents to the log file, if logging is enabled. If BUFFER is not provided, current buffer is used. Logging is enabled if `erc-logging-enabled' returns non-nil. This is normally done on exit, to save the unsaved portion of the buffer, since only the text that runs off the buffer limit is logged automatically. You can save every individual message by putting this function on `erc-insert-post-hook'. \(fn &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (erc-delete-dangerous-host erc-add-dangerous-host ;;;;;; erc-delete-keyword erc-add-keyword erc-delete-fool erc-add-fool ;;;;;; erc-delete-pal erc-add-pal) "erc-match" "erc/erc-match.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-match.el (autoload 'erc-match-mode "erc-match") (autoload 'erc-add-pal "erc-match" "\ Add pal interactively to `erc-pals'. \(fn)" t nil) (autoload 'erc-delete-pal "erc-match" "\ Delete pal interactively to `erc-pals'. \(fn)" t nil) (autoload 'erc-add-fool "erc-match" "\ Add fool interactively to `erc-fools'. \(fn)" t nil) (autoload 'erc-delete-fool "erc-match" "\ Delete fool interactively to `erc-fools'. \(fn)" t nil) (autoload 'erc-add-keyword "erc-match" "\ Add keyword interactively to `erc-keywords'. \(fn)" t nil) (autoload 'erc-delete-keyword "erc-match" "\ Delete keyword interactively to `erc-keywords'. \(fn)" t nil) (autoload 'erc-add-dangerous-host "erc-match" "\ Add dangerous-host interactively to `erc-dangerous-hosts'. \(fn)" t nil) (autoload 'erc-delete-dangerous-host "erc-match" "\ Delete dangerous-host interactively to `erc-dangerous-hosts'. \(fn)" t nil) ;;;*** ;;;### (autoloads nil "erc-menu" "erc/erc-menu.el" (19259 35415)) ;;; Generated autoloads from erc/erc-menu.el (autoload 'erc-menu-mode "erc-menu" nil t) ;;;*** ;;;### (autoloads (erc-cmd-WHOLEFT) "erc-netsplit" "erc/erc-netsplit.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-netsplit.el (autoload 'erc-netsplit-mode "erc-netsplit") (autoload 'erc-cmd-WHOLEFT "erc-netsplit" "\ Show who's gone. \(fn)" nil nil) ;;;*** ;;;### (autoloads (erc-server-select erc-determine-network) "erc-networks" ;;;;;; "erc/erc-networks.el" (19259 35415)) ;;; Generated autoloads from erc/erc-networks.el (autoload 'erc-determine-network "erc-networks" "\ Return the name of the network or \"Unknown\" as a symbol. Use the server parameter NETWORK if provided, otherwise parse the server name and search for a match in `erc-networks-alist'. \(fn)" nil nil) (autoload 'erc-server-select "erc-networks" "\ Interactively select a server to connect to using `erc-server-alist'. \(fn)" t nil) ;;;*** ;;;### (autoloads (pcomplete/erc-mode/NOTIFY erc-cmd-NOTIFY) "erc-notify" ;;;;;; "erc/erc-notify.el" (19259 35415)) ;;; Generated autoloads from erc/erc-notify.el (autoload 'erc-notify-mode "erc-notify" nil t) (autoload 'erc-cmd-NOTIFY "erc-notify" "\ Change `erc-notify-list' or list current notify-list members online. Without args, list the current list of notificated people online, with args, toggle notify status of people. \(fn &rest ARGS)" nil nil) (autoload 'pcomplete/erc-mode/NOTIFY "erc-notify" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads nil "erc-page" "erc/erc-page.el" (19259 35415)) ;;; Generated autoloads from erc/erc-page.el (autoload 'erc-page-mode "erc-page") ;;;*** ;;;### (autoloads nil "erc-pcomplete" "erc/erc-pcomplete.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from erc/erc-pcomplete.el (autoload 'erc-completion-mode "erc-pcomplete" nil t) ;;;*** ;;;### (autoloads nil "erc-replace" "erc/erc-replace.el" (19259 35415)) ;;; Generated autoloads from erc/erc-replace.el (autoload 'erc-replace-mode "erc-replace") ;;;*** ;;;### (autoloads nil "erc-ring" "erc/erc-ring.el" (19259 35415)) ;;; Generated autoloads from erc/erc-ring.el (autoload 'erc-ring-mode "erc-ring" nil t) ;;;*** ;;;### (autoloads (erc-nickserv-identify erc-nickserv-identify-mode) ;;;;;; "erc-services" "erc/erc-services.el" (19259 35415)) ;;; Generated autoloads from erc/erc-services.el (autoload 'erc-services-mode "erc-services" nil t) (autoload 'erc-nickserv-identify-mode "erc-services" "\ Set up hooks according to which MODE the user has chosen. \(fn MODE)" t nil) (autoload 'erc-nickserv-identify "erc-services" "\ Send an \"identify <PASSWORD>\" message to NickServ. When called interactively, read the password using `read-passwd'. \(fn PASSWORD)" t nil) ;;;*** ;;;### (autoloads nil "erc-sound" "erc/erc-sound.el" (19259 35415)) ;;; Generated autoloads from erc/erc-sound.el (autoload 'erc-sound-mode "erc-sound") ;;;*** ;;;### (autoloads (erc-speedbar-browser) "erc-speedbar" "erc/erc-speedbar.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-speedbar.el (autoload 'erc-speedbar-browser "erc-speedbar" "\ Initialize speedbar to display an ERC browser. This will add a speedbar major display mode. \(fn)" t nil) ;;;*** ;;;### (autoloads nil "erc-spelling" "erc/erc-spelling.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from erc/erc-spelling.el (autoload 'erc-spelling-mode "erc-spelling" nil t) ;;;*** ;;;### (autoloads nil "erc-stamp" "erc/erc-stamp.el" (19259 35415)) ;;; Generated autoloads from erc/erc-stamp.el (autoload 'erc-timestamp-mode "erc-stamp" nil t) ;;;*** ;;;### (autoloads (erc-track-minor-mode) "erc-track" "erc/erc-track.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-track.el (defvar erc-track-minor-mode nil "\ Non-nil if Erc-Track minor mode is enabled. See the command `erc-track-minor-mode' for a description of this minor mode.") (custom-autoload 'erc-track-minor-mode "erc-track" nil) (autoload 'erc-track-minor-mode "erc-track" "\ Global minor mode for tracking ERC buffers and showing activity in the mode line. This exists for the sole purpose of providing the C-c C-SPC and C-c C-@ keybindings. Make sure that you have enabled the track module, otherwise the keybindings will not do anything useful. \(fn &optional ARG)" t nil) (autoload 'erc-track-mode "erc-track" nil t) ;;;*** ;;;### (autoloads (erc-truncate-buffer erc-truncate-buffer-to-size) ;;;;;; "erc-truncate" "erc/erc-truncate.el" (19259 35415)) ;;; Generated autoloads from erc/erc-truncate.el (autoload 'erc-truncate-mode "erc-truncate" nil t) (autoload 'erc-truncate-buffer-to-size "erc-truncate" "\ Truncates the buffer to the size SIZE. If BUFFER is not provided, the current buffer is assumed. The deleted region is logged if `erc-logging-enabled' returns non-nil. \(fn SIZE &optional BUFFER)" nil nil) (autoload 'erc-truncate-buffer "erc-truncate" "\ Truncates the current buffer to `erc-max-buffer-size'. Meant to be used in hooks, like `erc-insert-post-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (erc-xdcc-add-file) "erc-xdcc" "erc/erc-xdcc.el" ;;;;;; (19259 35415)) ;;; Generated autoloads from erc/erc-xdcc.el (autoload 'erc-xdcc-mode "erc-xdcc") (autoload 'erc-xdcc-add-file "erc-xdcc" "\ Add a file to `erc-xdcc-files'. \(fn FILE)" t nil) ;;;*** ;;;### (autoloads (eshell-mode) "esh-mode" "eshell/esh-mode.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from eshell/esh-mode.el (autoload 'eshell-mode "esh-mode" "\ Emacs shell interactive mode. \\{eshell-mode-map} \(fn)" nil nil) ;;;*** ;;;### (autoloads (eshell-test) "esh-test" "eshell/esh-test.el" (19259 ;;;;;; 35415)) ;;; Generated autoloads from eshell/esh-test.el (autoload 'eshell-test "esh-test" "\ Test Eshell to verify that it works as expected. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (eshell-command-result eshell-command eshell) "eshell" ;;;;;; "eshell/eshell.el" (19259 35415)) ;;; Generated autoloads from eshell/eshell.el (autoload 'eshell "eshell" "\ Create an interactive Eshell buffer. The buffer used for Eshell sessions is determined by the value of `eshell-buffer-name'. If there is already an Eshell session active in that buffer, Emacs will simply switch to it. Otherwise, a new session will begin. A numeric prefix arg (as in `C-u 42 M-x eshell RET') switches to the session with that number, creating it if necessary. A nonnumeric prefix arg means to create a new session. Returns the buffer selected (or created). \(fn &optional ARG)" t nil) (autoload 'eshell-command "eshell" "\ Execute the Eshell command string COMMAND. With prefix ARG, insert output into the current buffer at point. \(fn &optional COMMAND ARG)" t nil) (autoload 'eshell-command-result "eshell" "\ Execute the given Eshell COMMAND, and return the result. The result might be any Lisp object. If STATUS-VAR is a symbol, it will be set to the exit status of the command. This is the only way to determine whether the value returned corresponding to a successful execution. \(fn COMMAND &optional STATUS-VAR)" nil nil) (define-obsolete-function-alias 'eshell-report-bug 'report-emacs-bug "23.1") ;;;*** ;;;### (autoloads (complete-tag select-tags-table tags-apropos list-tags ;;;;;; tags-query-replace tags-search tags-loop-continue next-file ;;;;;; pop-tag-mark find-tag-regexp find-tag-other-frame find-tag-other-window ;;;;;; find-tag find-tag-noselect tags-table-files visit-tags-table-buffer ;;;;;; visit-tags-table tags-table-mode find-tag-default-function ;;;;;; find-tag-hook tags-add-tables tags-compression-info-list ;;;;;; tags-table-list tags-case-fold-search) "etags" "progmodes/etags.el" ;;;;;; (19259 35416)) ;;; Generated autoloads from progmodes/etags.el (defvar tags-file-name nil "\ *File name of tags table. To switch to a new tags table, setting this variable is sufficient. If you set this variable, do not also set `tags-table-list'. Use the `etags' program to make a tags table file.") (put 'tags-file-name 'variable-interactive (purecopy "fVisit tags table: ")) (defvar tags-case-fold-search 'default "\ *Whether tags operations should be case-sensitive. A value of t means case-insensitive, a value of nil means case-sensitive. Any other value means use the setting of `case-fold-search'.") (custom-autoload 'tags-case-fold-search "etags" t) (defvar tags-table-list nil "\ *List of file names of tags tables to search. An element that is a directory means the file \"TAGS\" in that directory. To switch to a new list of tags tables, setting this variable is sufficient. If you set this variable, do not also set `tags-file-name'. Use the `etags' program to make a tags table file.") (custom-autoload 'tags-table-list "etags" t) (defvar tags-compression-info-list (purecopy '("" ".Z" ".bz2" ".gz" ".tgz")) "\ *List of extensions tried by etags when jka-compr is used. An empty string means search the non-compressed file. These extensions will be tried only if jka-compr was activated \(i.e. via customize of `auto-compression-mode' or by calling the function `auto-compression-mode').") (custom-autoload 'tags-compression-info-list "etags" t) (defvar tags-add-tables 'ask-user "\ *Control whether to add a new tags table to the current list. t means do; nil means don't (always start a new list). Any other value means ask the user whether to add a new tags table to the current list (as opposed to starting a new list).") (custom-autoload 'tags-add-tables "etags" t) (defvar find-tag-hook nil "\ *Hook to be run by \\[find-tag] after finding a tag. See `run-hooks'. The value in the buffer in which \\[find-tag] is done is used, not the value in the buffer \\[find-tag] goes to.") (custom-autoload 'find-tag-hook "etags" t) (defvar find-tag-default-function nil "\ *A function of no arguments used by \\[find-tag] to pick a default tag. If nil, and the symbol that is the value of `major-mode' has a `find-tag-default-function' property (see `put'), that is used. Otherwise, `find-tag-default' is used.") (custom-autoload 'find-tag-default-function "etags" t) (autoload 'tags-table-mode "etags" "\ Major mode for tags table file buffers. \(fn)" t nil) (autoload 'visit-tags-table "etags" "\ Tell tags commands to use tags table file FILE. FILE should be the name of a file created with the `etags' program. A directory name is ok too; it means file TAGS in that directory. Normally \\[visit-tags-table] sets the global value of `tags-file-name'. With a prefix arg, set the buffer-local value instead. When you find a tag with \\[find-tag], the buffer it finds the tag in is given a local value of this variable which is the name of the tags file the tag was in. \(fn FILE &optional LOCAL)" t nil) (autoload 'visit-tags-table-buffer "etags" "\ Select the buffer containing the current tags table. If optional arg is a string, visit that file as a tags table. If optional arg is t, visit the next table in `tags-table-list'. If optional arg is the atom `same', don't look for a new table; just select the buffer visiting `tags-file-name'. If arg is nil or absent, choose a first buffer from information in `tags-file-name', `tags-table-list', `tags-table-list-pointer'. Returns t if it visits a tags table, or nil if there are no more in the list. \(fn &optional CONT)" nil nil) (autoload 'tags-table-files "etags" "\ Return a list of files in the current tags table. Assumes the tags table is the current buffer. The file names are returned as they appeared in the `etags' command that created the table, usually without directory names. \(fn)" nil nil) (autoload 'find-tag-noselect "etags" "\ Find tag (in current tags table) whose name contains TAGNAME. Returns the buffer containing the tag's definition and moves its point there, but does not select the buffer. The default for TAGNAME is the expression in the buffer near point. If second arg NEXT-P is t (interactively, with prefix arg), search for another tag that matches the last tagname or regexp used. When there are multiple matches for a tag, more exact matches are found first. If NEXT-P is the atom `-' (interactively, with prefix arg that is a negative number or just \\[negative-argument]), pop back to the previous tag gone to. If third arg REGEXP-P is non-nil, treat TAGNAME as a regexp. A marker representing the point when this command is invoked is pushed onto a ring and may be popped back to with \\[pop-tag-mark]. Contrast this with the ring of marks gone to by the command. See documentation of variable `tags-file-name'. \(fn TAGNAME &optional NEXT-P REGEXP-P)" t nil) (autoload 'find-tag "etags" "\ Find tag (in current tags table) whose name contains TAGNAME. Select the buffer containing the tag's definition, and move point there. The default for TAGNAME is the expression in the buffer around or before point. If second arg NEXT-P is t (interactively, with prefix arg), search for another tag that matches the last tagname or regexp used. When there are multiple matches for a tag, more exact matches are found first. If NEXT-P is the atom `-' (interactively, with prefix arg that is a negative number or just \\[negative-argument]), pop back to the previous tag gone to. If third arg REGEXP-P is non-nil, treat TAGNAME as a regexp. A marker representing the point when this command is invoked is pushed onto a ring and may be popped back to with \\[pop-tag-mark]. Contrast this with the ring of marks gone to by the command. See documentation of variable `tags-file-name'. \(fn TAGNAME &optional NEXT-P REGEXP-P)" t nil) (define-key esc-map "." 'find-tag) (autoload 'find-tag-other-window "etags" "\ Find tag (in current tags table) whose name contains TAGNAME. Select the buffer containing the tag's definition in another window, and move point there. The default for TAGNAME is the expression in the buffer around or before point. If second arg NEXT-P is t (interactively, with prefix arg), search for another tag that matches the last tagname or regexp used. When there are multiple matches for a tag, more exact matches are found first. If NEXT-P is negative (interactively, with prefix arg that is a negative number or just \\[negative-argument]), pop back to the previous tag gone to. If third arg REGEXP-P is non-nil, treat TAGNAME as a regexp. A marker representing the point when this command is invoked is pushed onto a ring and may be popped back to with \\[pop-tag-mark]. Contrast this with the ring of marks gone to by the command. See documentation of variable `tags-file-name'. \(fn TAGNAME &optional NEXT-P REGEXP-P)" t nil) (define-key ctl-x-4-map "." 'find-tag-other-window) (autoload 'find-tag-other-frame "etags" "\ Find tag (in current tags table) whose name contains TAGNAME. Select the buffer containing the tag's definition in another frame, and move point there. The default for TAGNAME is the expression in the buffer around or before point. If second arg NEXT-P is t (interactively, with prefix arg), search for another tag that matches the last tagname or regexp used. When there are multiple matches for a tag, more exact matches are found first. If NEXT-P is negative (interactively, with prefix arg that is a negative number or just \\[negative-argument]), pop back to the previous tag gone to. If third arg REGEXP-P is non-nil, treat TAGNAME as a regexp. A marker representing the point when this command is invoked is pushed onto a ring and may be popped back to with \\[pop-tag-mark]. Contrast this with the ring of marks gone to by the command. See documentation of variable `tags-file-name'. \(fn TAGNAME &optional NEXT-P)" t nil) (define-key ctl-x-5-map "." 'find-tag-other-frame) (autoload 'find-tag-regexp "etags" "\ Find tag (in current tags table) whose name matches REGEXP. Select the buffer containing the tag's definition and move point there. If second arg NEXT-P is t (interactively, with prefix arg), search for another tag that matches the last tagname or regexp used. When there are multiple matches for a tag, more exact matches are found first. If NEXT-P is negative (interactively, with prefix arg that is a negative number or just \\[negative-argument]), pop back to the previous tag gone to. If third arg OTHER-WINDOW is non-nil, select the buffer in another window. A marker representing the point when this command is invoked is pushed onto a ring and may be popped back to with \\[pop-tag-mark]. Contrast this with the ring of marks gone to by the command. See documentation of variable `tags-file-name'. \(fn REGEXP &optional NEXT-P OTHER-WINDOW)" t nil) (define-key esc-map [?\C-.] 'find-tag-regexp) (define-key esc-map "*" 'pop-tag-mark) (autoload 'pop-tag-mark "etags" "\ Pop back to where \\[find-tag] was last invoked. This is distinct from invoking \\[find-tag] with a negative argument since that pops a stack of markers at which tags were found, not from where they were found. \(fn)" t nil) (autoload 'next-file "etags" "\ Select next file among files in current tags table. A first argument of t (prefix arg, if interactive) initializes to the beginning of the list of files in the tags table. If the argument is neither nil nor t, it is evalled to initialize the list of files. Non-nil second argument NOVISIT means use a temporary buffer to save time and avoid uninteresting warnings. Value is nil if the file was already visited; if the file was newly read in, the value is the filename. \(fn &optional INITIALIZE NOVISIT)" t nil) (autoload 'tags-loop-continue "etags" "\ Continue last \\[tags-search] or \\[tags-query-replace] command. Used noninteractively with non-nil argument to begin such a command (the argument is passed to `next-file', which see). Two variables control the processing we do on each file: the value of `tags-loop-scan' is a form to be executed on each file to see if it is interesting (it returns non-nil if so) and `tags-loop-operate' is a form to evaluate to operate on an interesting file. If the latter evaluates to nil, we exit; otherwise we scan the next file. \(fn &optional FIRST-TIME)" t nil) (define-key esc-map "," 'tags-loop-continue) (autoload 'tags-search "etags" "\ Search through all files listed in tags table for match for REGEXP. Stops when a match is found. To continue searching for next match, use command \\[tags-loop-continue]. See documentation of variable `tags-file-name'. \(fn REGEXP &optional FILE-LIST-FORM)" t nil) (autoload 'tags-query-replace "etags" "\ Do `query-replace-regexp' of FROM with TO on all files listed in tags table. Third arg DELIMITED (prefix arg) means replace only word-delimited matches. If you exit (\\[keyboard-quit], RET or q), you can resume the query replace with the command \\[tags-loop-continue]. Fourth arg FILE-LIST-FORM non-nil means initialize the replacement loop. Fifth and sixth arguments START and END are accepted, for compatibility with `query-replace-regexp', and ignored. If FILE-LIST-FORM is non-nil, it is a form to evaluate to produce the list of files to search. See also the documentation of the variable `tags-file-name'. \(fn FROM TO &optional DELIMITED FILE-LIST-FORM)" t nil) (autoload 'list-tags "etags" "\ Display list of tags in file FILE. This searches only the first table in the list, and no included tables. FILE should be as it appeared in the `etags' command, usually without a directory specification. \(fn FILE &optional NEXT-MATCH)" t nil) (autoload 'tags-apropos "etags" "\ Display list of all tags in tags table REGEXP matches. \(fn REGEXP)" t nil) (autoload 'select-tags-table "etags" "\ Select a tags table file from a menu of those you have already used. The list of tags tables to select from is stored in `tags-table-set-list'; see the doc of that variable if you want to add names to the list. \(fn)" t nil) (autoload 'complete-tag "etags" "\ Perform tags completion on the text around point. Completes to the set of names listed in the current tags table. The string to complete is chosen in the same way as the default for \\[find-tag] (which see). \(fn)" t nil) ;;;*** ;;;### (autoloads (ethio-composition-function ethio-insert-ethio-space ;;;;;; ethio-write-file ethio-find-file ethio-java-to-fidel-buffer ;;;;;; ethio-fidel-to-java-buffer ethio-tex-to-fidel-buffer ethio-fidel-to-tex-buffer ;;;;;; ethio-input-special-character ethio-replace-space ethio-modify-vowel ;;;;;; ethio-fidel-to-sera-marker ethio-fidel-to-sera-region ethio-fidel-to-sera-buffer ;;;;;; ethio-sera-to-fidel-marker ethio-sera-to-fidel-region ethio-sera-to-fidel-buffer ;;;;;; setup-ethiopic-environment-internal) "ethio-util" "language/ethio-util.el" ;;;;;; (19259 35416)) ;;; Generated autoloads from language/ethio-util.el (autoload 'setup-ethiopic-environment-internal "ethio-util" "\ Not documented \(fn)" nil nil) (autoload 'ethio-sera-to-fidel-buffer "ethio-util" "\ Convert the current buffer from SERA to FIDEL. The variable `ethio-primary-language' specifies the primary language and `ethio-secondary-language' specifies the secondary. If the 1st optional argument SECONDARY is non-nil, assume the buffer begins with the secondary language; otherwise with the primary language. If the 2nd optional argument FORCE is non-nil, perform conversion even if the buffer is read-only. See also the descriptions of the variables `ethio-use-colon-for-colon' and `ethio-use-three-dot-question'. \(fn &optional SECONDARY FORCE)" t nil) (autoload 'ethio-sera-to-fidel-region "ethio-util" "\ Convert the characters in region from SERA to FIDEL. The variable `ethio-primary-language' specifies the primary language and `ethio-secondary-language' specifies the secondary. If the 3rd argument SECONDARY is given and non-nil, assume the region begins with the secondary language; otherwise with the primary language. If the 4th argument FORCE is given and non-nil, perform conversion even if the buffer is read-only. See also the descriptions of the variables `ethio-use-colon-for-colon' and `ethio-use-three-dot-question'. \(fn BEGIN END &optional SECONDARY FORCE)" t nil) (autoload 'ethio-sera-to-fidel-marker "ethio-util" "\ Convert the regions surrounded by \"<sera>\" and \"</sera>\" from SERA to FIDEL. Assume that each region begins with `ethio-primary-language'. The markers \"<sera>\" and \"</sera>\" themselves are not deleted. \(fn &optional FORCE)" t nil) (autoload 'ethio-fidel-to-sera-buffer "ethio-util" "\ Replace all the FIDEL characters in the current buffer to the SERA format. The variable `ethio-primary-language' specifies the primary language and `ethio-secondary-language' specifies the secondary. If the 1st optional argument SECONDARY is non-nil, try to convert the region so that it begins with the secondary language; otherwise with the primary language. If the 2nd optional argument FORCE is non-nil, convert even if the buffer is read-only. See also the descriptions of the variables `ethio-use-colon-for-colon', `ethio-use-three-dot-question', `ethio-quote-vowel-always' and `ethio-numeric-reduction'. \(fn &optional SECONDARY FORCE)" t nil) (autoload 'ethio-fidel-to-sera-region "ethio-util" "\ Replace all the FIDEL characters in the region to the SERA format. The variable `ethio-primary-language' specifies the primary language and `ethio-secondary-language' specifies the secondary. If the 3rd argument SECONDARY is given and non-nil, convert the region so that it begins with the secondary language; otherwise with the primary language. If the 4th argument FORCE is given and non-nil, convert even if the buffer is read-only. See also the descriptions of the variables `ethio-use-colon-for-colon', `ethio-use-three-dot-question', `ethio-quote-vowel-always' and `ethio-numeric-reduction'. \(fn BEGIN END &optional SECONDARY FORCE)" t nil) (autoload 'ethio-fidel-to-sera-marker "ethio-util" "\ Convert the regions surrounded by \"<sera>\" and \"</sera>\" from FIDEL to SERA. The markers \"<sera>\" and \"</sera>\" themselves are not deleted. \(fn &optional FORCE)" t nil) (autoload 'ethio-modify-vowel "ethio-util" "\ Modify the vowel of the FIDEL that is under the cursor. \(fn)" t nil) (autoload 'ethio-replace-space "ethio-util" "\ Replace ASCII spaces with Ethiopic word separators in the region. In the specified region, replace word separators surrounded by two Ethiopic characters, depending on the first argument CH, which should be 1, 2, or 3. If CH = 1, word separator will be replaced with an ASCII space. If CH = 2, with two ASCII spaces. If CH = 3, with the Ethiopic colon-like word separator. The 2nd and 3rd arguments BEGIN and END specify the region. \(fn CH BEGIN END)" t nil) (autoload 'ethio-input-special-character "ethio-util" "\ This function is deprecated. \(fn ARG)" t nil) (autoload 'ethio-fidel-to-tex-buffer "ethio-util" "\ Convert each fidel characters in the current buffer into a fidel-tex command. \(fn)" t nil) (autoload 'ethio-tex-to-fidel-buffer "ethio-util" "\ Convert fidel-tex commands in the current buffer into fidel chars. \(fn)" t nil) (autoload 'ethio-fidel-to-java-buffer "ethio-util" "\ Convert Ethiopic characters into the Java escape sequences. Each escape sequence is of the form \\uXXXX, where XXXX is the character's codepoint (in hex) in Unicode. If `ethio-java-save-lowercase' is non-nil, use [0-9a-f]. Otherwise, [0-9A-F]. \(fn)" nil nil) (autoload 'ethio-java-to-fidel-buffer "ethio-util" "\ Convert the Java escape sequences into corresponding Ethiopic characters. \(fn)" nil nil) (autoload 'ethio-find-file "ethio-util" "\ Transliterate file content into Ethiopic dependig on filename suffix. \(fn)" nil nil) (autoload 'ethio-write-file "ethio-util" "\ Transliterate Ethiopic characters in ASCII depending on the file extension. \(fn)" nil nil) (autoload 'ethio-insert-ethio-space "ethio-util" "\ Insert the Ethiopic word delimiter (the colon-like character). With ARG, insert that many delimiters. \(fn ARG)" t nil) (autoload 'ethio-composition-function "ethio-util" "\ Not documented \(fn POS TO FONT-OBJECT STRING)" nil nil) ;;;*** ;;;### (autoloads (eudc-load-eudc eudc-query-form eudc-expand-inline ;;;;;; eudc-get-phone eudc-get-email eudc-set-server) "eudc" "net/eudc.el" ;;;;;; (19259 35416)) ;;; Generated autoloads from net/eudc.el (autoload 'eudc-set-server "eudc" "\ Set the directory server to SERVER using PROTOCOL. Unless NO-SAVE is non-nil, the server is saved as the default server for future sessions. \(fn SERVER PROTOCOL &optional NO-SAVE)" t nil) (autoload 'eudc-get-email "eudc" "\ Get the email field of NAME from the directory server. If ERROR is non-nil, report an error if there is none. \(fn NAME &optional ERROR)" t nil) (autoload 'eudc-get-phone "eudc" "\ Get the phone field of NAME from the directory server. If ERROR is non-nil, report an error if there is none. \(fn NAME &optional ERROR)" t nil) (autoload 'eudc-expand-inline "eudc" "\ Query the directory server, and expand the query string before point. The query string consists of the buffer substring from the point back to the preceding comma, colon or beginning of line. The variable `eudc-inline-query-format' controls how to associate the individual inline query words with directory attribute names. After querying the server for the given string, the expansion specified by `eudc-inline-expansion-format' is inserted in the buffer at point. If REPLACE is non-nil, then this expansion replaces the name in the buffer. `eudc-expansion-overwrites-query' being non-nil inverts the meaning of REPLACE. Multiple servers can be tried with the same query until one finds a match, see `eudc-inline-expansion-servers' \(fn &optional REPLACE)" t nil) (autoload 'eudc-query-form "eudc" "\ Display a form to query the directory server. If given a non-nil argument GET-FIELDS-FROM-SERVER, the function first queries the server for the existing fields and displays a corresponding form. \(fn &optional GET-FIELDS-FROM-SERVER)" t nil) (autoload 'eudc-load-eudc "eudc" "\ Load the Emacs Unified Directory Client. This does nothing except loading eudc by autoload side-effect. \(fn)" t nil) (cond ((not (featurep 'xemacs)) (defvar eudc-tools-menu (let ((map (make-sparse-keymap "Directory Search"))) (define-key map [phone] `(menu-item ,(purecopy "Get Phone") eudc-get-phone :help ,(purecopy "Get the phone field of name from the directory server"))) (define-key map [email] `(menu-item ,(purecopy "Get Email") eudc-get-email :help ,(purecopy "Get the email field of NAME from the directory server"))) (define-key map [separator-eudc-email] menu-bar-separator) (define-key map [expand-inline] `(menu-item ,(purecopy "Expand Inline Query") eudc-expand-inline :help ,(purecopy "Query the directory server, and expand the query string before point"))) (define-key map [query] `(menu-item ,(purecopy "Query with Form") eudc-query-form :help ,(purecopy "Display a form to query the directory server"))) (define-key map [separator-eudc-query] menu-bar-separator) (define-key map [new] `(menu-item ,(purecopy "New Server") eudc-set-server :help ,(purecopy "Set the directory server to SERVER using PROTOCOL"))) (define-key map [load] `(menu-item ,(purecopy "Load Hotlist of Servers") eudc-load-eudc :help ,(purecopy "Load the Emacs Unified Directory Client"))) map)) (fset 'eudc-tools-menu (symbol-value 'eudc-tools-menu))) (t (let ((menu '("Directory Search" ["Load Hotlist of Servers" eudc-load-eudc t] ["New Server" eudc-set-server t] ["---" nil nil] ["Query with Form" eudc-query-form t] ["Expand Inline Query" eudc-expand-inline t] ["---" nil nil] ["Get Email" eudc-get-email t] ["Get Phone" eudc-get-phone t]))) (if (not (featurep 'eudc-autoloads)) (if (featurep 'xemacs) (if (and (featurep 'menubar) (not (featurep 'infodock))) (add-submenu '("Tools") menu)) (require 'easymenu) (cond ((fboundp 'easy-menu-add-item) (easy-menu-add-item nil '("tools") (easy-menu-create-menu (car menu) (cdr menu)))) ((fboundp 'easy-menu-create-keymaps) (define-key global-map [menu-bar tools eudc] (cons "Directory Search" (easy-menu-create-keymaps "Directory Search" (cdr menu))))))))))) ;;;*** ;;;### (autoloads (eudc-display-jpeg-as-button eudc-display-jpeg-inline ;;;;;; eudc-display-sound eudc-display-mail eudc-display-url eudc-display-generic-binary) ;;;;;; "eudc-bob" "net/eudc-bob.el" (19259 35416)) ;;; Generated autoloads from net/eudc-bob.el (autoload 'eudc-display-generic-binary "eudc-bob" "\ Display a button for unidentified binary DATA. \(fn DATA)" nil nil) (autoload 'eudc-display-url "eudc-bob" "\ Display URL and make it clickable. \(fn URL)" nil nil) (autoload 'eudc-display-mail "eudc-bob" "\ Display e-mail address and make it clickable. \(fn MAIL)" nil nil) (autoload 'eudc-display-sound "eudc-bob" "\ Display a button to play the sound DATA. \(fn DATA)" nil nil) (autoload 'eudc-display-jpeg-inline "eudc-bob" "\ Display the JPEG DATA inline at point if possible. \(fn DATA)" nil nil) (autoload 'eudc-display-jpeg-as-button "eudc-bob" "\ Display a button for the JPEG DATA. \(fn DATA)" nil nil) ;;;*** ;;;### (autoloads (eudc-try-bbdb-insert eudc-insert-record-at-point-into-bbdb) ;;;;;; "eudc-export" "net/eudc-export.el" (19259 35416)) ;;; Generated autoloads from net/eudc-export.el (autoload 'eudc-insert-record-at-point-into-bbdb "eudc-export" "\ Insert record at point into the BBDB database. This function can only be called from a directory query result buffer. \(fn)" t nil) (autoload 'eudc-try-bbdb-insert "eudc-export" "\ Call `eudc-insert-record-at-point-into-bbdb' if on a record. \(fn)" t nil) ;;;*** ;;;### (autoloads (eudc-edit-hotlist) "eudc-hotlist" "net/eudc-hotlist.el" ;;;;;; (19259 35416)) ;;; Generated autoloads from net/eudc-hotlist.el (autoload 'eudc-edit-hotlist "eudc-hotlist" "\ Edit the hotlist of directory servers in a specialized buffer. \(fn)" t nil) ;;;*** ;;;### (autoloads (ewoc-create) "ewoc" "emacs-lisp/ewoc.el" (19259 ;;;;;; 35416)) ;;; Generated autoloads from emacs-lisp/ewoc.el (autoload 'ewoc-create "ewoc" "\ Create an empty ewoc. The ewoc will be inserted in the current buffer at the current position. PRETTY-PRINTER should be a function that takes one argument, an element, and inserts a string representing it in the buffer (at point). The string PRETTY-PRINTER inserts may be empty or span several lines. The PRETTY-PRINTER should use `insert', and not `insert-before-markers'. Optional second and third arguments HEADER and FOOTER are strings, possibly empty, that will always be present at the top and bottom, respectively, of the ewoc. Normally, a newline is automatically inserted after the header, the footer and every node's printed representation. Optional fourth arg NOSEP non-nil inhibits this. \(fn PRETTY-PRINTER &optional HEADER FOOTER NOSEP)" nil nil) ;;;*** ;;;### (autoloads (executable-make-buffer-file-executable-if-script-p ;;;;;; executable-self-display executable-set-magic executable-interpret ;;;;;; executable-command-find-posix-p) "executable" "progmodes/executable.el" ;;;;;; (19259 35416)) ;;; Generated autoloads from progmodes/executable.el (autoload 'executable-command-find-posix-p "executable" "\ Check if PROGRAM handles arguments Posix-style. If PROGRAM is non-nil, use that instead of \"find\". \(fn &optional PROGRAM)" nil nil) (autoload 'executable-interpret "executable" "\ Run script with user-specified args, and collect output in a buffer. While script runs asynchronously, you can use the \\[next-error] command to find the next error. The buffer is also in `comint-mode' and `compilation-shell-minor-mode', so that you can answer any prompts. \(fn COMMAND)" t nil) (autoload 'executable-set-magic "executable" "\ Set this buffer's interpreter to INTERPRETER with optional ARGUMENT. The variables `executable-magicless-file-regexp', `executable-prefix', `executable-insert', `executable-query' and `executable-chmod' control when and how magic numbers are inserted or replaced and scripts made executable. \(fn INTERPRETER &optional ARGUMENT NO-QUERY-FLAG INSERT-FLAG)" t nil) (autoload 'executable-self-display "executable" "\ Turn a text file into a self-displaying Un*x command. The magic number of such a command displays all lines but itself. \(fn)" t nil) (autoload 'executable-make-buffer-file-executable-if-script-p "executable" "\ Make file executable according to umask if not already executable. If file already has any execute bits set at all, do not change existing file modes. \(fn)" nil nil) ;;;*** ;;;### (autoloads (expand-jump-to-next-slot expand-jump-to-previous-slot ;;;;;; expand-abbrev-hook expand-add-abbrevs) "expand" "expand.el" ;;;;;; (19259 35416)) ;;; Generated autoloads from expand.el (autoload 'expand-add-abbrevs "expand" "\ Add a list of abbrev to abbrev table TABLE. ABBREVS is a list of abbrev definitions; each abbrev description entry has the form (ABBREV EXPANSION ARG). ABBREV is the abbreviation to replace. EXPANSION is the replacement string or a function which will make the expansion. For example you, could use the DMacros or skeleton packages to generate such functions. ARG is an optional argument which can be a number or a list of numbers. If ARG is a number, point is placed ARG chars from the beginning of the expanded text. If ARG is a list of numbers, point is placed according to the first member of the list, but you can visit the other specified positions cyclicaly with the functions `expand-jump-to-previous-slot' and `expand-jump-to-next-slot'. If ARG is omitted, point is placed at the end of the expanded text. \(fn TABLE ABBREVS)" nil nil) (autoload 'expand-abbrev-hook "expand" "\ Abbrev hook used to do the expansion job of expand abbrevs. See `expand-add-abbrevs'. Value is non-nil if expansion was done. \(fn)" nil nil) (autoload 'expand-jump-to-previous-slot "expand" "\ Move the cursor to the previous slot in the last abbrev expansion. This is used only in conjunction with `expand-add-abbrevs'. \(fn)" t nil) (autoload 'expand-jump-to-next-slot "expand" "\ Move the cursor to the next slot in the last abbrev expansion. This is used only in conjunction with `expand-add-abbrevs'. \(fn)" t nil) (define-key abbrev-map "p" 'expand-jump-to-previous-slot) (define-key abbrev-map "n" 'expand-jump-to-next-slot) ;;;*** ;;;### (autoloads (f90-mode) "f90" "progmodes/f90.el" (19259 35416)) ;;; Generated autoloads from progmodes/f90.el (autoload 'f90-mode "f90" "\ Major mode for editing Fortran 90,95 code in free format. For fixed format code, use `fortran-mode'. \\[f90-indent-line] indents the current line. \\[f90-indent-new-line] indents current line and creates a new indented line. \\[f90-indent-subprogram] indents the current subprogram. Type `? or `\\[help-command] to display a list of built-in abbrevs for F90 keywords. Key definitions: \\{f90-mode-map} Variables controlling indentation style and extra features: `f90-do-indent' Extra indentation within do blocks (default 3). `f90-if-indent' Extra indentation within if/select/where/forall blocks (default 3). `f90-type-indent' Extra indentation within type/enum/interface/block-data blocks (default 3). `f90-program-indent' Extra indentation within program/module/subroutine/function blocks (default 2). `f90-continuation-indent' Extra indentation applied to continuation lines (default 5). `f90-comment-region' String inserted by function \\[f90-comment-region] at start of each line in region (default \"!!!$\"). `f90-indented-comment-re' Regexp determining the type of comment to be intended like code (default \"!\"). `f90-directive-comment-re' Regexp of comment-like directive like \"!HPF\\\\$\", not to be indented (default \"!hpf\\\\$\"). `f90-break-delimiters' Regexp holding list of delimiters at which lines may be broken (default \"[-+*/><=,% \\t]\"). `f90-break-before-delimiters' Non-nil causes `f90-do-auto-fill' to break lines before delimiters (default t). `f90-beginning-ampersand' Automatic insertion of & at beginning of continuation lines (default t). `f90-smart-end' From an END statement, check and fill the end using matching block start. Allowed values are 'blink, 'no-blink, and nil, which determine whether to blink the matching beginning (default 'blink). `f90-auto-keyword-case' Automatic change of case of keywords (default nil). The possibilities are 'downcase-word, 'upcase-word, 'capitalize-word. `f90-leave-line-no' Do not left-justify line numbers (default nil). Turning on F90 mode calls the value of the variable `f90-mode-hook' with no args, if that value is non-nil. \(fn)" t nil) ;;;*** ;;;### (autoloads (variable-pitch-mode buffer-face-toggle buffer-face-set ;;;;;; buffer-face-mode text-scale-adjust text-scale-decrease text-scale-increase ;;;;;; text-scale-set face-remap-set-base face-remap-reset-base ;;;;;; face-remap-add-relative) "face-remap" "face-remap.el" (19259 ;;;;;; 35416)) ;;; Generated autoloads from face-remap.el (autoload 'face-remap-add-relative "face-remap" "\ Add a face remapping entry of FACE to SPECS in the current buffer. Return a cookie which can be used to delete the remapping with `face-remap-remove-relative'. SPECS can be any value suitable for the `face' text property, including a face name, a list of face names, or a face-attribute property list. The attributes given by SPECS will be merged with any other currently active face remappings of FACE, and with the global definition of FACE. An attempt is made to sort multiple entries so that entries with relative face-attributes are applied after entries with absolute face-attributes. The base (lowest priority) remapping may be set to a specific value, instead of the default of the global face definition, using `face-remap-set-base'. \(fn FACE &rest SPECS)" nil nil) (autoload 'face-remap-reset-base "face-remap" "\ Set the base remapping of FACE to inherit from FACE's global definition. \(fn FACE)" nil nil) (autoload 'face-remap-set-base "face-remap" "\ Set the base remapping of FACE in the current buffer to SPECS. If SPECS is empty, the default base remapping is restored, which inherits from the global definition of FACE; note that this is different from SPECS containing a single value `nil', which does not inherit from the global definition of FACE. \(fn FACE &rest SPECS)" nil nil) (autoload 'text-scale-set "face-remap" "\ Set the scale factor of the default face in the current buffer to LEVEL. If LEVEL is non-zero, `text-scale-mode' is enabled, otherwise it is disabled. LEVEL is a number of steps, with 0 representing the default size. Each step scales the height of the default face by the variable `text-scale-mode-step' (a negative number decreases the height by the same amount). \(fn LEVEL)" t nil) (autoload 'text-scale-increase "face-remap" "\ Increase the height of the default face in the current buffer by INC steps. If the new height is other than the default, `text-scale-mode' is enabled. Each step scales the height of the default face by the variable `text-scale-mode-step' (a negative number of steps decreases the height by the same amount). As a special case, an argument of 0 will remove any scaling currently active. \(fn INC)" t nil) (autoload 'text-scale-decrease "face-remap" "\ Decrease the height of the default face in the current buffer by DEC steps. See `text-scale-increase' for more details. \(fn DEC)" t nil) (define-key ctl-x-map [(control ?+)] 'text-scale-adjust) (define-key ctl-x-map [(control ?-)] 'text-scale-adjust) (define-key ctl-x-map [(control ?=)] 'text-scale-adjust) (define-key ctl-x-map [(control ?0)] 'text-scale-adjust) (autoload 'text-scale-adjust "face-remap" "\ Increase or decrease the height of the default face in the current buffer. The actual adjustment made depends on the final component of the key-binding used to invoke the command, with all modifiers removed: +, = Increase the default face height by one step - Decrease the default face height by one step 0 Reset the default face height to the global default Then, continue to read input events and further adjust the face height as long as the input event read (with all modifiers removed) is one of the above. Each step scales the height of the default face by the variable `text-scale-mode-step' (a negative number of steps decreases the height by the same amount). As a special case, an argument of 0 will remove any scaling currently active. This command is a special-purpose wrapper around the `text-scale-increase' command which makes repetition convenient even when it is bound in a non-top-level keymap. For binding in a top-level keymap, `text-scale-increase' or `text-scale-decrease' may be more appropriate. \(fn INC)" t nil) (autoload 'buffer-face-mode "face-remap" "\ Minor mode for a buffer-specific default face. When enabled, the face specified by the variable `buffer-face-mode-face' is used to display the buffer text. \(fn &optional ARG)" t nil) (autoload 'buffer-face-set "face-remap" "\ Enable `buffer-face-mode', using face specs SPECS. SPECS can be any value suitable for the `face' text property, including a face name, a list of face names, or a face-attribute If SPECS is nil, then `buffer-face-mode' is disabled. This function will make the variable `buffer-face-mode-face' buffer local, and set it to FACE. \(fn &rest SPECS)" t nil) (autoload 'buffer-face-toggle "face-remap" "\ Toggle `buffer-face-mode', using face specs SPECS. SPECS can be any value suitable for the `face' text property, including a face name, a list of face names, or a face-attribute If `buffer-face-mode' is already enabled, and is currently using the face specs SPECS, then it is disabled; if buffer-face-mode is disabled, or is enabled and currently displaying some other face, then is left enabled, but the face changed to reflect SPECS. This function will make the variable `buffer-face-mode-face' buffer local, and set it to SPECS. \(fn &rest SPECS)" t nil) (autoload 'variable-pitch-mode "face-remap" "\ Variable-pitch default-face mode. An interface to `buffer-face-mode' which uses the `variable-pitch' face. Besides the choice of face, it is the same as `buffer-face-mode'. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (feedmail-queue-reminder feedmail-run-the-queue ;;;;;; feedmail-run-the-queue-global-prompt feedmail-run-the-queue-no-prompts ;;;;;; feedmail-send-it) "feedmail" "mail/feedmail.el" (19259 35416)) ;;; Generated autoloads from mail/feedmail.el (autoload 'feedmail-send-it "feedmail" "\ Send the current mail buffer using the Feedmail package. This is a suitable value for `send-mail-function'. It can be used with various lower-level mechanisms to provide features such as queueing. \(fn)" nil nil) (autoload 'feedmail-run-the-queue-no-prompts "feedmail" "\ Like `feedmail-run-the-queue', but suppress confirmation prompts. \(fn &optional ARG)" t nil) (autoload 'feedmail-run-the-queue-global-prompt "feedmail" "\ Like `feedmail-run-the-queue', but with a global confirmation prompt. This is generally most useful if run non-interactively, since you can bail out with an appropriate answer to the global confirmation prompt. \(fn &optional ARG)" t nil) (autoload 'feedmail-run-the-queue "feedmail" "\ Visit each message in the feedmail queue directory and send it out. Return value is a list of three things: number of messages sent, number of messages skipped, and number of non-message things in the queue (commonly backup file names and the like). \(fn &optional ARG)" t nil) (autoload 'feedmail-queue-reminder "feedmail" "\ Perform some kind of reminder activity about queued and draft messages. Called with an optional symbol argument which says what kind of event is triggering the reminder activity. The default is 'on-demand, which is what you typically would use if you were putting this in your Emacs start-up or mail hook code. Other recognized values for WHAT-EVENT (these are passed internally by feedmail): after-immediate (a message has just been sent in immediate mode) after-queue (a message has just been queued) after-draft (a message has just been placed in the draft directory) after-run (the queue has just been run, possibly sending messages) WHAT-EVENT is used as a key into the table `feedmail-queue-reminder-alist'. If the associated value is a function, it is called without arguments and is expected to perform the reminder activity. You can supply your own reminder functions by redefining `feedmail-queue-reminder-alist'. If you don't want any reminders, you can set `feedmail-queue-reminder-alist' to nil. \(fn &optional WHAT-EVENT)" t nil) ;;;*** ;;;### (autoloads (ffap-bindings dired-at-point ffap-at-mouse ffap-menu ;;;;;; find-file-at-point ffap-next) "ffap" "ffap.el" (19259 35416)) ;;; Generated autoloads from ffap.el (autoload 'ffap-next "ffap" "\ Search buffer for next file or URL, and run ffap. Optional argument BACK says to search backwards. Optional argument WRAP says to try wrapping around if necessary. Interactively: use a single prefix to search backwards, double prefix to wrap forward, triple to wrap backwards. Actual search is done by `ffap-next-guess'. \(fn &optional BACK WRAP)" t nil) (autoload 'find-file-at-point "ffap" "\ Find FILENAME, guessing a default from text around point. If `ffap-url-regexp' is not nil, the FILENAME may also be an URL. With a prefix, this command behaves exactly like `ffap-file-finder'. If `ffap-require-prefix' is set, the prefix meaning is reversed. See also the variables `ffap-dired-wildcards', `ffap-newfile-prompt', and the functions `ffap-file-at-point' and `ffap-url-at-point'. \(fn &optional FILENAME)" t nil) (defalias 'ffap 'find-file-at-point) (autoload 'ffap-menu "ffap" "\ Put up a menu of files and urls mentioned in this buffer. Then set mark, jump to choice, and try to fetch it. The menu is cached in `ffap-menu-alist', and rebuilt by `ffap-menu-rescan'. The optional RESCAN argument (a prefix, interactively) forces a rebuild. Searches with `ffap-menu-regexp'. \(fn &optional RESCAN)" t nil) (autoload 'ffap-at-mouse "ffap" "\ Find file or url guessed from text around mouse click. Interactively, calls `ffap-at-mouse-fallback' if no guess is found. Return value: * if a guess string is found, return it (after finding it) * if the fallback is called, return whatever it returns * otherwise, nil \(fn E)" t nil) (autoload 'dired-at-point "ffap" "\ Start Dired, defaulting to file at point. See `ffap'. \(fn &optional FILENAME)" t nil) (defun ffap-guess-file-name-at-point nil "\ Try to get a file name at point. This hook is intended to be put in `file-name-at-point-functions'." (when (fboundp (quote ffap-guesser)) (let ((guess (ffap-guesser))) (setq guess (if (or (not guess) (and (fboundp (quote ffap-url-p)) (ffap-url-p guess)) (and (fboundp (quote ffap-file-remote-p)) (ffap-file-remote-p guess))) guess (abbreviate-file-name (expand-file-name guess)))) (when guess (if (file-directory-p guess) (file-name-as-directory guess) guess))))) (autoload 'ffap-bindings "ffap" "\ Evaluate the forms in variable `ffap-bindings'. \(fn)" t nil) ;;;*** ;;;### (autoloads (file-cache-minibuffer-complete file-cache-add-directory-recursively ;;;;;; file-cache-add-directory-using-locate file-cache-add-directory-using-find ;;;;;; file-cache-add-file file-cache-add-directory-list file-cache-add-directory) ;;;;;; "filecache" "filecache.el" (19259 35416)) ;;; Generated autoloads from filecache.el (autoload 'file-cache-add-directory "filecache" "\ Add DIRECTORY to the file cache. If the optional REGEXP argument is non-nil, only files which match it will be added to the cache. \(fn DIRECTORY &optional REGEXP)" t nil) (autoload 'file-cache-add-directory-list "filecache" "\ Add DIRECTORY-LIST (a list of directory names) to the file cache. If the optional REGEXP argument is non-nil, only files which match it will be added to the cache. Note that the REGEXP is applied to the files in each directory, not to the directory list itself. \(fn DIRECTORY-LIST &optional REGEXP)" t nil) (autoload 'file-cache-add-file "filecache" "\ Add FILE to the file cache. \(fn FILE)" t nil) (autoload 'file-cache-add-directory-using-find "filecache" "\ Use the `find' command to add files to the file cache. Find is run in DIRECTORY. \(fn DIRECTORY)" t nil) (autoload 'file-cache-add-directory-using-locate "filecache" "\ Use the `locate' command to add files to the file cache. STRING is passed as an argument to the locate command. \(fn STRING)" t nil) (autoload 'file-cache-add-directory-recursively "filecache" "\ Adds DIR and any subdirectories to the file-cache. This function does not use any external programs If the optional REGEXP argument is non-nil, only files which match it will be added to the cache. Note that the REGEXP is applied to the files in each directory, not to the directory list itself. \(fn DIR &optional REGEXP)" t nil) (autoload 'file-cache-minibuffer-complete "filecache" "\ Complete a filename in the minibuffer using a preloaded cache. Filecache does two kinds of substitution: it completes on names in the cache, and, once it has found a unique name, it cycles through the directories that the name is available in. With a prefix argument, the name is considered already unique; only the second substitution \(directories) is done. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (copy-dir-locals-to-file-locals-prop-line copy-dir-locals-to-file-locals ;;;;;; copy-file-locals-to-dir-locals delete-dir-local-variable ;;;;;; add-dir-local-variable delete-file-local-variable-prop-line ;;;;;; add-file-local-variable-prop-line delete-file-local-variable ;;;;;; add-file-local-variable) "files-x" "files-x.el" (19259 35416)) ;;; Generated autoloads from files-x.el (autoload 'add-file-local-variable "files-x" "\ Add file-local VARIABLE with its VALUE to the Local Variables list. This command deletes all existing settings of VARIABLE (except `mode' and `eval') and adds a new file-local VARIABLE with VALUE to the Local Variables list. If there is no Local Variables list in the current file buffer then this function adds the first line containing the string `Local Variables:' and the last line containing the string `End:'. \(fn VARIABLE VALUE)" t nil) (autoload 'delete-file-local-variable "files-x" "\ Delete all settings of file-local VARIABLE from the Local Variables list. \(fn VARIABLE)" t nil) (autoload 'add-file-local-variable-prop-line "files-x" "\ Add file-local VARIABLE with its VALUE to the -*- line. This command deletes all existing settings of VARIABLE (except `mode' and `eval') and adds a new file-local VARIABLE with VALUE to the -*- line. If there is no -*- line at the beginning of the current file buffer then this function adds it. \(fn VARIABLE VALUE)" t nil) (autoload 'delete-file-local-variable-prop-line "files-x" "\ Delete all settings of file-local VARIABLE from the -*- line. \(fn VARIABLE)" t nil) (autoload 'add-dir-local-variable "files-x" "\ Add directory-local VARIABLE with its VALUE and MODE to .dir-locals.el. \(fn MODE VARIABLE VALUE)" t nil) (autoload 'delete-dir-local-variable "files-x" "\ Delete all MODE settings of file-local VARIABLE from .dir-locals.el. \(fn MODE VARIABLE)" t nil) (autoload 'copy-file-locals-to-dir-locals "files-x" "\ Copy file-local variables to .dir-locals.el. \(fn)" t nil) (autoload 'copy-dir-locals-to-file-locals "files-x" "\ Copy directory-local variables to the Local Variables list. \(fn)" t nil) (autoload 'copy-dir-locals-to-file-locals-prop-line "files-x" "\ Copy directory-local variables to the -*- line. \(fn)" t nil) ;;;*** ;;;### (autoloads (filesets-init) "filesets" "filesets.el" (19259 ;;;;;; 35416)) ;;; Generated autoloads from filesets.el (autoload 'filesets-init "filesets" "\ Filesets initialization. Set up hooks, load the cache file -- if existing -- and build the menu. \(fn)" nil nil) ;;;*** ;;;### (autoloads (find-cmd) "find-cmd" "find-cmd.el" (19259 35417)) ;;; Generated autoloads from find-cmd.el (autoload 'find-cmd "find-cmd" "\ Initiate the building of a find command. For example: \(find-cmd '(prune (name \".svn\" \".git\" \".CVS\")) '(and (or (name \"*.pl\" \"*.pm\" \"*.t\") (mtime \"+1\")) (fstype \"nfs\" \"ufs\")))) `default-directory' is used as the initial search path. The result is a string that should be ready for the command line. \(fn &rest SUBFINDS)" nil nil) ;;;*** ;;;### (autoloads (find-grep-dired find-name-dired find-dired find-grep-options ;;;;;; find-ls-subdir-switches find-ls-option) "find-dired" "find-dired.el" ;;;;;; (19259 35417)) ;;; Generated autoloads from find-dired.el (defvar find-ls-option (if (eq system-type 'berkeley-unix) (purecopy '("-ls" . "-gilsb")) (purecopy '("-exec ls -ld {} \\;" . "-ld"))) "\ Description of the option to `find' to produce an `ls -l'-type listing. This is a cons of two strings (FIND-OPTION . LS-SWITCHES). FIND-OPTION gives the option (or options) to `find' that produce the desired output. LS-SWITCHES is a list of `ls' switches to tell dired how to parse the output.") (custom-autoload 'find-ls-option "find-dired" t) (defvar find-ls-subdir-switches (purecopy "-al") "\ `ls' switches for inserting subdirectories in `*Find*' buffers. This should contain the \"-l\" switch. Use the \"-F\" or \"-b\" switches if and only if you also use them for `find-ls-option'.") (custom-autoload 'find-ls-subdir-switches "find-dired" t) (defvar find-grep-options (purecopy (if (or (eq system-type 'berkeley-unix) (string-match "solaris2" system-configuration) (string-match "irix" system-configuration)) "-s" "-q")) "\ Option to grep to be as silent as possible. On Berkeley systems, this is `-s'; on Posix, and with GNU grep, `-q' does it. On other systems, the closest you can come is to use `-l'.") (custom-autoload 'find-grep-options "find-dired" t) (autoload 'find-dired "find-dired" "\ Run `find' and go into Dired mode on a buffer of the output. The command run (after changing into DIR) is find . \\( ARGS \\) -ls except that the variable `find-ls-option' specifies what to use as the final argument. \(fn DIR ARGS)" t nil) (autoload 'find-name-dired "find-dired" "\ Search DIR recursively for files matching the globbing pattern PATTERN, and run dired on those files. PATTERN is a shell wildcard (not an Emacs regexp) and need not be quoted. The command run (after changing into DIR) is find . -name 'PATTERN' -ls \(fn DIR PATTERN)" t nil) (autoload 'find-grep-dired "find-dired" "\ Find files in DIR containing a regexp REGEXP and start Dired on output. The command run (after changing into DIR) is find . -exec grep -s -e REGEXP {} \\; -ls Thus ARG can also contain additional grep options. \(fn DIR REGEXP)" t nil) ;;;*** ;;;### (autoloads (ff-mouse-find-other-file-other-window ff-mouse-find-other-file ;;;;;; ff-find-other-file ff-get-other-file) "find-file" "find-file.el" ;;;;;; (19259 35417)) ;;; Generated autoloads from find-file.el (defvar ff-special-constructs `((,(purecopy "^#\\s *\\(include\\|import\\)\\s +[<\"]\\(.*\\)[>\"]") lambda nil (buffer-substring (match-beginning 2) (match-end 2)))) "\ *List of special constructs for `ff-treat-as-special' to recognize. Each element, tried in order, has the form (REGEXP . EXTRACT). If REGEXP matches the current line (from the beginning of the line), `ff-treat-as-special' calls function EXTRACT with no args. If EXTRACT returns nil, keep trying. Otherwise, return the filename that EXTRACT returned.") (autoload 'ff-get-other-file "find-file" "\ Find the header or source file corresponding to this file. See also the documentation for `ff-find-other-file'. If optional IN-OTHER-WINDOW is non-nil, find the file in another window. \(fn &optional IN-OTHER-WINDOW)" t nil) (defalias 'ff-find-related-file 'ff-find-other-file) (autoload 'ff-find-other-file "find-file" "\ Find the header or source file corresponding to this file. Being on a `#include' line pulls in that file. If optional IN-OTHER-WINDOW is non-nil, find the file in the other window. If optional IGNORE-INCLUDE is non-nil, ignore being on `#include' lines. Variables of interest include: - `ff-case-fold-search' Non-nil means ignore cases in matches (see `case-fold-search'). If you have extensions in different cases, you will want this to be nil. - `ff-always-in-other-window' If non-nil, always open the other file in another window, unless an argument is given to `ff-find-other-file'. - `ff-ignore-include' If non-nil, ignores #include lines. - `ff-always-try-to-create' If non-nil, always attempt to create the other file if it was not found. - `ff-quiet-mode' If non-nil, traces which directories are being searched. - `ff-special-constructs' A list of regular expressions specifying how to recognize special constructs such as include files etc, and an associated method for extracting the filename from that construct. - `ff-other-file-alist' Alist of extensions to find given the current file's extension. - `ff-search-directories' List of directories searched through with each extension specified in `ff-other-file-alist' that matches this file's extension. - `ff-pre-find-hook' List of functions to be called before the search for the file starts. - `ff-pre-load-hook' List of functions to be called before the other file is loaded. - `ff-post-load-hook' List of functions to be called after the other file is loaded. - `ff-not-found-hook' List of functions to be called if the other file could not be found. - `ff-file-created-hook' List of functions to be called if the other file has been created. \(fn &optional IN-OTHER-WINDOW IGNORE-INCLUDE)" t nil) (autoload 'ff-mouse-find-other-file "find-file" "\ Visit the file you click on. \(fn EVENT)" t nil) (autoload 'ff-mouse-find-other-file-other-window "find-file" "\ Visit the file you click on in another window. \(fn EVENT)" t nil) ;;;*** ;;;### (autoloads (find-function-setup-keys find-variable-at-point ;;;;;; find-function-at-point find-function-on-key find-face-definition ;;;;;; find-definition-noselect find-variable-other-frame find-variable-other-window ;;;;;; find-variable find-variable-noselect find-function-other-frame ;;;;;; find-function-other-window find-function find-function-noselect ;;;;;; find-function-search-for-symbol find-library) "find-func" ;;;;;; "emacs-lisp/find-func.el" (19259 35417)) ;;; Generated autoloads from emacs-lisp/find-func.el (autoload 'find-library "find-func" "\ Find the Emacs Lisp source of LIBRARY. LIBRARY should be a string (the name of the library). \(fn LIBRARY)" t nil) (autoload 'find-function-search-for-symbol "find-func" "\ Search for SYMBOL's definition of type TYPE in LIBRARY. Visit the library in a buffer, and return a cons cell (BUFFER . POSITION), or just (BUFFER . nil) if the definition can't be found in the file. If TYPE is nil, look for a function definition. Otherwise, TYPE specifies the kind of definition, and it is interpreted via `find-function-regexp-alist'. The search is done in the source for library LIBRARY. \(fn SYMBOL TYPE LIBRARY)" nil nil) (autoload 'find-function-noselect "find-func" "\ Return a pair (BUFFER . POINT) pointing to the definition of FUNCTION. Finds the source file containing the definition of FUNCTION in a buffer and the point of the definition. The buffer is not selected. If the function definition can't be found in the buffer, returns (BUFFER). If the file where FUNCTION is defined is not known, then it is searched for in `find-function-source-path' if non-nil, otherwise in `load-path'. \(fn FUNCTION)" nil nil) (autoload 'find-function "find-func" "\ Find the definition of the FUNCTION near point. Finds the source file containing the definition of the function near point (selected by `function-called-at-point') in a buffer and places point before the definition. Set mark before moving, if the buffer already existed. The library where FUNCTION is defined is searched for in `find-function-source-path', if non-nil, otherwise in `load-path'. See also `find-function-recenter-line' and `find-function-after-hook'. \(fn FUNCTION)" t nil) (autoload 'find-function-other-window "find-func" "\ Find, in another window, the definition of FUNCTION near point. See `find-function' for more details. \(fn FUNCTION)" t nil) (autoload 'find-function-other-frame "find-func" "\ Find, in another frame, the definition of FUNCTION near point. See `find-function' for more details. \(fn FUNCTION)" t nil) (autoload 'find-variable-noselect "find-func" "\ Return a pair `(BUFFER . POINT)' pointing to the definition of VARIABLE. Finds the library containing the definition of VARIABLE in a buffer and the point of the definition. The buffer is not selected. If the variable's definition can't be found in the buffer, return (BUFFER). The library where VARIABLE is defined is searched for in FILE or `find-function-source-path', if non-nil, otherwise in `load-path'. \(fn VARIABLE &optional FILE)" nil nil) (autoload 'find-variable "find-func" "\ Find the definition of the VARIABLE at or before point. Finds the library containing the definition of the variable near point (selected by `variable-at-point') in a buffer and places point before the definition. Set mark before moving, if the buffer already existed. The library where VARIABLE is defined is searched for in `find-function-source-path', if non-nil, otherwise in `load-path'. See also `find-function-recenter-line' and `find-function-after-hook'. \(fn VARIABLE)" t nil) (autoload 'find-variable-other-window "find-func" "\ Find, in another window, the definition of VARIABLE near point. See `find-variable' for more details. \(fn VARIABLE)" t nil) (autoload 'find-variable-other-frame "find-func" "\ Find, in another frame, the definition of VARIABLE near point. See `find-variable' for more details. \(fn VARIABLE)" t nil) (autoload 'find-definition-noselect "find-func" "\ Return a pair `(BUFFER . POINT)' pointing to the definition of SYMBOL. If the definition can't be found in the buffer, return (BUFFER). TYPE says what type of definition: nil for a function, `defvar' for a variable, `defface' for a face. This function does not switch to the buffer nor display it. The library where SYMBOL is defined is searched for in FILE or `find-function-source-path', if non-nil, otherwise in `load-path'. \(fn SYMBOL TYPE &optional FILE)" nil nil) (autoload 'find-face-definition "find-func" "\ Find the definition of FACE. FACE defaults to the name near point. Finds the Emacs Lisp library containing the definition of the face near point (selected by `variable-at-point') in a buffer and places point before the definition. Set mark before moving, if the buffer already existed. The library where FACE is defined is searched for in `find-function-source-path', if non-nil, otherwise in `load-path'. See also `find-function-recenter-line' and `find-function-after-hook'. \(fn FACE)" t nil) (autoload 'find-function-on-key "find-func" "\ Find the function that KEY invokes. KEY is a string. Set mark before moving, if the buffer already existed. \(fn KEY)" t nil) (autoload 'find-function-at-point "find-func" "\ Find directly the function at point in the other window. \(fn)" t nil) (autoload 'find-variable-at-point "find-func" "\ Find directly the variable at point in the other window. \(fn)" t nil) (autoload 'find-function-setup-keys "find-func" "\ Define some key bindings for the find-function family of functions. \(fn)" nil nil) ;;;*** ;;;### (autoloads (find-lisp-find-dired-filter find-lisp-find-dired-subdirectories ;;;;;; find-lisp-find-dired) "find-lisp" "find-lisp.el" (19259 35417)) ;;; Generated autoloads from find-lisp.el (autoload 'find-lisp-find-dired "find-lisp" "\ Find files in DIR, matching REGEXP. \(fn DIR REGEXP)" t nil) (autoload 'find-lisp-find-dired-subdirectories "find-lisp" "\ Find all subdirectories of DIR. \(fn DIR)" t nil) (autoload 'find-lisp-find-dired-filter "find-lisp" "\ Change the filter on a find-lisp-find-dired buffer to REGEXP. \(fn REGEXP)" t nil) ;;;*** ;;;### (autoloads (finder-by-keyword finder-commentary finder-list-keywords) ;;;;;; "finder" "finder.el" (19259 35417)) ;;; Generated autoloads from finder.el (autoload 'finder-list-keywords "finder" "\ Display descriptions of the keywords in the Finder buffer. \(fn)" t nil) (autoload 'finder-commentary "finder" "\ Display FILE's commentary section. FILE should be in a form suitable for passing to `locate-library'. \(fn FILE)" t nil) (autoload 'finder-by-keyword "finder" "\ Find packages matching a given keyword. \(fn)" t nil) ;;;*** ;;;### (autoloads (enable-flow-control-on enable-flow-control) "flow-ctrl" ;;;;;; "flow-ctrl.el" (19259 35417)) ;;; Generated autoloads from flow-ctrl.el (autoload 'enable-flow-control "flow-ctrl" "\ Toggle flow control handling. When handling is enabled, user can type C-s as C-\\, and C-q as C-^. With arg, enable flow control mode if arg is positive, otherwise disable. \(fn &optional ARGUMENT)" t nil) (autoload 'enable-flow-control-on "flow-ctrl" "\ Enable flow control if using one of a specified set of terminal types. Use `(enable-flow-control-on \"vt100\" \"h19\")' to enable flow control on VT-100 and H19 terminals. When flow control is enabled, you must type C-\\ to get the effect of a C-s, and type C-^ to get the effect of a C-q. \(fn &rest LOSING-TERMINAL-TYPES)" nil nil) ;;;*** ;;;### (autoloads (fill-flowed fill-flowed-encode) "flow-fill" "gnus/flow-fill.el" ;;;;;; (19259 35417)) ;;; Generated autoloads from gnus/flow-fill.el (autoload 'fill-flowed-encode "flow-fill" "\ Not documented \(fn &optional BUFFER)" nil nil) (autoload 'fill-flowed "flow-fill" "\ Not documented \(fn &optional BUFFER DELETE-SPACE)" nil nil) ;;;*** ;;;### (autoloads (flymake-mode-off flymake-mode-on flymake-mode) ;;;;;; "flymake" "progmodes/flymake.el" (19259 35417)) ;;; Generated autoloads from progmodes/flymake.el (autoload 'flymake-mode "flymake" "\ Minor mode to do on-the-fly syntax checking. When called interactively, toggles the minor mode. With arg, turn Flymake mode on if and only if arg is positive. \(fn &optional ARG)" t nil) (autoload 'flymake-mode-on "flymake" "\ Turn flymake mode on. \(fn)" nil nil) (autoload 'flymake-mode-off "flymake" "\ Turn flymake mode off. \(fn)" nil nil) ;;;*** ;;;### (autoloads (flyspell-buffer flyspell-region flyspell-mode-off ;;;;;; turn-off-flyspell turn-on-flyspell flyspell-mode flyspell-prog-mode) ;;;;;; "flyspell" "textmodes/flyspell.el" (19259 35417)) ;;; Generated autoloads from textmodes/flyspell.el (autoload 'flyspell-prog-mode "flyspell" "\ Turn on `flyspell-mode' for comments and strings. \(fn)" t nil) (defvar flyspell-mode nil) (autoload 'flyspell-mode "flyspell" "\ Minor mode performing on-the-fly spelling checking. This spawns a single Ispell process and checks each word. The default flyspell behavior is to highlight incorrect words. With no argument, this command toggles Flyspell mode. With a prefix argument ARG, turn Flyspell minor mode on if ARG is positive, otherwise turn it off. Bindings: \\[ispell-word]: correct words (using Ispell). \\[flyspell-auto-correct-word]: automatically correct word. \\[flyspell-auto-correct-previous-word]: automatically correct the last misspelled word. \\[flyspell-correct-word] (or down-mouse-2): popup correct words. Hooks: This runs `flyspell-mode-hook' after flyspell mode is entered or exit. Remark: `flyspell-mode' uses `ispell-mode'. Thus all Ispell options are valid. For instance, a different dictionary can be used by invoking `ispell-change-dictionary'. Consider using the `ispell-parser' to check your text. For instance consider adding: \(add-hook 'tex-mode-hook (function (lambda () (setq ispell-parser 'tex)))) in your .emacs file. \\[flyspell-region] checks all words inside a region. \\[flyspell-buffer] checks the whole buffer. \(fn &optional ARG)" t nil) (autoload 'turn-on-flyspell "flyspell" "\ Unconditionally turn on Flyspell mode. \(fn)" nil nil) (autoload 'turn-off-flyspell "flyspell" "\ Unconditionally turn off Flyspell mode. \(fn)" nil nil) (autoload 'flyspell-mode-off "flyspell" "\ Turn Flyspell mode off. \(fn)" nil nil) (autoload 'flyspell-region "flyspell" "\ Flyspell text between BEG and END. \(fn BEG END)" t nil) (autoload 'flyspell-buffer "flyspell" "\ Flyspell whole buffer. \(fn)" t nil) ;;;*** ;;;### (autoloads (follow-delete-other-windows-and-split follow-mode ;;;;;; turn-off-follow-mode turn-on-follow-mode) "follow" "follow.el" ;;;;;; (19259 35417)) ;;; Generated autoloads from follow.el (autoload 'turn-on-follow-mode "follow" "\ Turn on Follow mode. Please see the function `follow-mode'. \(fn)" nil nil) (autoload 'turn-off-follow-mode "follow" "\ Turn off Follow mode. Please see the function `follow-mode'. \(fn)" nil nil) (autoload 'follow-mode "follow" "\ Minor mode that combines windows into one tall virtual window. The feeling of a \"virtual window\" has been accomplished by the use of two major techniques: * The windows always displays adjacent sections of the buffer. This means that whenever one window is moved, all the others will follow. (Hence the name Follow mode.) * Should the point (cursor) end up outside a window, another window displaying that point is selected, if possible. This makes it possible to walk between windows using normal cursor movement commands. Follow mode comes to its prime when used on a large screen and two side-by-side windows are used. The user can, with the help of Follow mode, use two full-height windows as though they would have been one. Imagine yourself editing a large function, or section of text, and being able to use 144 lines instead of the normal 72... (your mileage may vary). To split one large window into two side-by-side windows, the commands `\\[split-window-horizontally]' or `M-x follow-delete-other-windows-and-split' can be used. Only windows displayed in the same frame follow each other. If the variable `follow-intercept-processes' is non-nil, Follow mode will listen to the output of processes and redisplay accordingly. \(This is the default.) This command runs the normal hook `follow-mode-hook'. Keys specific to Follow mode: \\{follow-mode-map} \(fn &optional ARG)" t nil) (autoload 'follow-delete-other-windows-and-split "follow" "\ Create two side by side windows and enter Follow mode. Execute this command to display as much as possible of the text in the selected window. All other windows, in the current frame, are deleted and the selected window is split in two side-by-side windows. Follow mode is activated, hence the two windows always will display two successive pages. \(If one window is moved, the other one will follow.) If ARG is positive, the leftmost window is selected. If negative, the rightmost is selected. If ARG is nil, the leftmost window is selected if the original window is the first one in the frame. To bind this command to a hotkey, place the following line in your `~/.emacs' file, replacing [f7] by your favourite key: (global-set-key [f7] 'follow-delete-other-windows-and-split) \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (footnote-mode) "footnote" "mail/footnote.el" (19259 ;;;;;; 35417)) ;;; Generated autoloads from mail/footnote.el (autoload 'footnote-mode "footnote" "\ Toggle footnote minor mode. This minor mode provides footnote support for `message-mode'. To get started, play around with the following keys: \\{footnote-minor-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (forms-find-file-other-window forms-find-file forms-mode) ;;;;;; "forms" "forms.el" (19259 35417)) ;;; Generated autoloads from forms.el (autoload 'forms-mode "forms" "\ Major mode to visit files in a field-structured manner using a form. Commands: Equivalent keys in read-only mode: TAB forms-next-field TAB C-c TAB forms-next-field C-c < forms-first-record < C-c > forms-last-record > C-c ? describe-mode ? C-c C-k forms-delete-record C-c C-q forms-toggle-read-only q C-c C-o forms-insert-record C-c C-l forms-jump-record l C-c C-n forms-next-record n C-c C-p forms-prev-record p C-c C-r forms-search-reverse r C-c C-s forms-search-forward s C-c C-x forms-exit x \(fn &optional PRIMARY)" t nil) (autoload 'forms-find-file "forms" "\ Visit a file in Forms mode. \(fn FN)" t nil) (autoload 'forms-find-file-other-window "forms" "\ Visit a file in Forms mode in other window. \(fn FN)" t nil) ;;;*** ;;;### (autoloads (fortran-mode) "fortran" "progmodes/fortran.el" ;;;;;; (19259 35417)) ;;; Generated autoloads from progmodes/fortran.el (autoload 'fortran-mode "fortran" "\ Major mode for editing Fortran code in fixed format. For free format code, use `f90-mode'. \\[fortran-indent-line] indents the current Fortran line correctly. Note that DO statements must not share a common CONTINUE. Type ;? or ;\\[help-command] to display a list of built-in abbrevs for Fortran keywords. Key definitions: \\{fortran-mode-map} Variables controlling indentation style and extra features: `fortran-comment-line-start' To use comments starting with `!', set this to the string \"!\". `fortran-do-indent' Extra indentation within DO blocks (default 3). `fortran-if-indent' Extra indentation within IF blocks (default 3). `fortran-structure-indent' Extra indentation within STRUCTURE, UNION, MAP and INTERFACE blocks. (default 3) `fortran-continuation-indent' Extra indentation applied to continuation statements (default 5). `fortran-comment-line-extra-indent' Amount of extra indentation for text in full-line comments (default 0). `fortran-comment-indent-style' How to indent the text in full-line comments. Allowed values are: nil don't change the indentation fixed indent to `fortran-comment-line-extra-indent' beyond the value of either `fortran-minimum-statement-indent-fixed' (fixed format) or `fortran-minimum-statement-indent-tab' (TAB format), depending on the continuation format in use. relative indent to `fortran-comment-line-extra-indent' beyond the indentation for a line of code. (default 'fixed) `fortran-comment-indent-char' Single-character string to be inserted instead of space for full-line comment indentation (default \" \"). `fortran-minimum-statement-indent-fixed' Minimum indentation for statements in fixed format mode (default 6). `fortran-minimum-statement-indent-tab' Minimum indentation for statements in TAB format mode (default 9). `fortran-line-number-indent' Maximum indentation for line numbers (default 1). A line number will get less than this much indentation if necessary to avoid reaching column 5. `fortran-check-all-num-for-matching-do' Non-nil causes all numbered lines to be treated as possible \"continue\" statements (default nil). `fortran-blink-matching-if' Non-nil causes \\[fortran-indent-line] on an ENDIF (or ENDDO) statement to blink on the matching IF (or DO [WHILE]). (default nil) `fortran-continuation-string' Single-character string to be inserted in column 5 of a continuation line (default \"$\"). `fortran-comment-region' String inserted by \\[fortran-comment-region] at start of each line in the region (default \"c$$$\"). `fortran-electric-line-number' Non-nil causes line number digits to be moved to the correct column as typed (default t). `fortran-break-before-delimiters' Non-nil causes lines to be broken before delimiters (default t). Turning on Fortran mode calls the value of the variable `fortran-mode-hook' with no args, if that value is non-nil. \(fn)" t nil) ;;;*** ;;;### (autoloads (fortune fortune-to-signature fortune-compile fortune-from-region ;;;;;; fortune-add-fortune) "fortune" "play/fortune.el" (19259 35418)) ;;; Generated autoloads from play/fortune.el (autoload 'fortune-add-fortune "fortune" "\ Add STRING to a fortune file FILE. Interactively, if called with a prefix argument, read the file name to use. Otherwise use the value of `fortune-file'. \(fn STRING FILE)" t nil) (autoload 'fortune-from-region "fortune" "\ Append the current region to a local fortune-like data file. Interactively, if called with a prefix argument, read the file name to use. Otherwise use the value of `fortune-file'. \(fn BEG END FILE)" t nil) (autoload 'fortune-compile "fortune" "\ Compile fortune file. If called with a prefix asks for the FILE to compile, otherwise uses the value of `fortune-file'. This currently cannot handle directories. \(fn &optional FILE)" t nil) (autoload 'fortune-to-signature "fortune" "\ Create signature from output of the fortune program. If called with a prefix asks for the FILE to choose the fortune from, otherwise uses the value of `fortune-file'. If you want to have fortune choose from a set of files in a directory, call interactively with prefix and choose the directory as the fortune-file. \(fn &optional FILE)" t nil) (autoload 'fortune "fortune" "\ Display a fortune cookie. If called with a prefix asks for the FILE to choose the fortune from, otherwise uses the value of `fortune-file'. If you want to have fortune choose from a set of files in a directory, call interactively with prefix and choose the directory as the fortune-file. \(fn &optional FILE)" t nil) ;;;*** ;;;### (autoloads (gdb-enable-debug gdb) "gdb-ui" "progmodes/gdb-ui.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from progmodes/gdb-ui.el (autoload 'gdb "gdb-ui" "\ Run gdb on program FILE in buffer *gud-FILE*. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. If `gdb-many-windows' is nil (the default value) then gdb just pops up the GUD buffer unless `gdb-show-main' is t. In this case it starts with two windows: one displaying the GUD buffer and the other with the source file with the main routine of the inferior. If `gdb-many-windows' is t, regardless of the value of `gdb-show-main', the layout below will appear unless `gdb-use-separate-io-buffer' is nil when the source buffer occupies the full width of the frame. Keybindings are shown in some of the buffers. Watch expressions appear in the speedbar/slowbar. The following commands help control operation : `gdb-many-windows' - Toggle the number of windows gdb uses. `gdb-restore-windows' - To restore the window layout. See Info node `(emacs)GDB Graphical Interface' for a more detailed description of this mode. +----------------------------------------------------------------------+ | GDB Toolbar | +-----------------------------------+----------------------------------+ | GUD buffer (I/O of GDB) | Locals buffer | |-----------------------------------+----------------------------------+ | | | | Source buffer | I/O buffer for debugged program | | | | |-----------------------------------+----------------------------------+ | Stack buffer | Breakpoints/threads buffer | +-----------------------------------+----------------------------------+ The option \"--annotate=3\" must be included in this value. To run GDB in text command mode, use `gud-gdb'. You need to use text command mode to debug multiple programs within one Emacs session. \(fn COMMAND-LINE)" t nil) (defalias 'gdba 'gdb) (defvar gdb-enable-debug nil "\ Non-nil means record the process input and output in `gdb-debug-log'.") (custom-autoload 'gdb-enable-debug "gdb-ui" t) ;;;*** ;;;### (autoloads (generic-make-keywords-list generic-mode generic-mode-internal ;;;;;; define-generic-mode) "generic" "emacs-lisp/generic.el" (19259 ;;;;;; 35419)) ;;; Generated autoloads from emacs-lisp/generic.el (defvar generic-mode-list nil "\ A list of mode names for `generic-mode'. Do not add entries to this list directly; use `define-generic-mode' instead (which see).") (autoload 'define-generic-mode "generic" "\ Create a new generic mode MODE. MODE is the name of the command for the generic mode; don't quote it. The optional DOCSTRING is the documentation for the mode command. If you do not supply it, `define-generic-mode' uses a default documentation string instead. COMMENT-LIST is a list in which each element is either a character, a string of one or two characters, or a cons cell. A character or a string is set up in the mode's syntax table as a \"comment starter\". If the entry is a cons cell, the `car' is set up as a \"comment starter\" and the `cdr' as a \"comment ender\". (Use nil for the latter if you want comments to end at the end of the line.) Note that the syntax table has limitations about what comment starters and enders are actually possible. KEYWORD-LIST is a list of keywords to highlight with `font-lock-keyword-face'. Each keyword should be a string. FONT-LOCK-LIST is a list of additional expressions to highlight. Each element of this list should have the same form as an element of `font-lock-keywords'. AUTO-MODE-LIST is a list of regular expressions to add to `auto-mode-alist'. These regular expressions are added when Emacs runs the macro expansion. FUNCTION-LIST is a list of functions to call to do some additional setup. The mode command calls these functions just before it runs the mode hook `MODE-hook'. See the file generic-x.el for some examples of `define-generic-mode'. \(fn MODE COMMENT-LIST KEYWORD-LIST FONT-LOCK-LIST AUTO-MODE-LIST FUNCTION-LIST &optional DOCSTRING)" nil (quote macro)) (autoload 'generic-mode-internal "generic" "\ Go into the generic mode MODE. \(fn MODE COMMENT-LIST KEYWORD-LIST FONT-LOCK-LIST FUNCTION-LIST)" nil nil) (autoload 'generic-mode "generic" "\ Enter generic mode MODE. Generic modes provide basic comment and font-lock functionality for \"generic\" files. (Files which are too small to warrant their own mode, but have comment characters, keywords, and the like.) To define a generic-mode, use the function `define-generic-mode'. Some generic modes are defined in `generic-x.el'. \(fn MODE)" t nil) (autoload 'generic-make-keywords-list "generic" "\ Return a `font-lock-keywords' construct that highlights KEYWORD-LIST. KEYWORD-LIST is a list of keyword strings that should be highlighted with face FACE. This function calculates a regular expression that matches these keywords and concatenates it with PREFIX and SUFFIX. Then it returns a construct based on this regular expression that can be used as an element of `font-lock-keywords'. \(fn KEYWORD-LIST FACE &optional PREFIX SUFFIX)" nil nil) ;;;*** ;;;### (autoloads (glasses-mode) "glasses" "progmodes/glasses.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from progmodes/glasses.el (autoload 'glasses-mode "glasses" "\ Minor mode for making identifiers likeThis readable. When this mode is active, it tries to add virtual separators (like underscores) at places they belong to. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (gmm-tool-bar-from-list gmm-widget-p gmm-error ;;;;;; gmm-message gmm-regexp-concat) "gmm-utils" "gnus/gmm-utils.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gmm-utils.el (autoload 'gmm-regexp-concat "gmm-utils" "\ Potentially concat a list of regexps into a single one. The concatenation is done with logical ORs. \(fn REGEXP)" nil nil) (autoload 'gmm-message "gmm-utils" "\ If LEVEL is lower than `gmm-verbose' print ARGS using `message'. Guideline for numbers: 1 - error messages 3 - non-serious error messages 5 - messages for things that take a long time 7 - not very important messages on stuff 9 - messages inside loops. \(fn LEVEL &rest ARGS)" nil nil) (autoload 'gmm-error "gmm-utils" "\ Beep an error if LEVEL is equal to or less than `gmm-verbose'. ARGS are passed to `message'. \(fn LEVEL &rest ARGS)" nil nil) (autoload 'gmm-widget-p "gmm-utils" "\ Non-nil if SYMBOL is a widget. \(fn SYMBOL)" nil nil) (autoload 'gmm-tool-bar-from-list "gmm-utils" "\ Make a tool bar from ICON-LIST. Within each entry of ICON-LIST, the first element is a menu command, the second element is an icon file name and the third element is a test function. You can use \\[describe-key] <menu-entry> to find out the name of a menu command. The fourth and all following elements are passed as the PROPS argument to the function `tool-bar-local-item'. If ZAP-LIST is a list, remove those item from the default `tool-bar-map'. If it is t, start with a new sparse map. You can use \\[describe-key] <icon> to find out the name of an icon item. When \\[describe-key] <icon> shows \"<tool-bar> <new-file> runs the command find-file\", then use `new-file' in ZAP-LIST. DEFAULT-MAP specifies the default key map for ICON-LIST. \(fn ICON-LIST ZAP-LIST DEFAULT-MAP)" nil nil) ;;;*** ;;;### (autoloads (gnus gnus-other-frame gnus-slave gnus-no-server ;;;;;; gnus-slave-no-server) "gnus" "gnus/gnus.el" (19259 35419)) ;;; Generated autoloads from gnus/gnus.el (when (fboundp 'custom-autoload) (custom-autoload 'gnus-select-method "gnus")) (autoload 'gnus-slave-no-server "gnus" "\ Read network news as a slave, without connecting to the local server. \(fn &optional ARG)" t nil) (autoload 'gnus-no-server "gnus" "\ Read network news. If ARG is a positive number, Gnus will use that as the startup level. If ARG is nil, Gnus will be started at level 2. If ARG is non-nil and not a positive number, Gnus will prompt the user for the name of an NNTP server to use. As opposed to `gnus', this command will not connect to the local server. \(fn &optional ARG SLAVE)" t nil) (autoload 'gnus-slave "gnus" "\ Read news as a slave. \(fn &optional ARG)" t nil) (autoload 'gnus-other-frame "gnus" "\ Pop up a frame to read news. This will call one of the Gnus commands which is specified by the user option `gnus-other-frame-function' (default `gnus') with the argument ARG if Gnus is not running, otherwise just pop up a Gnus frame. The optional second argument DISPLAY should be a standard display string such as \"unix:0\" to specify where to pop up a frame. If DISPLAY is omitted or the function `make-frame-on-display' is not available, the current display is used. \(fn &optional ARG DISPLAY)" t nil) (autoload 'gnus "gnus" "\ Read network news. If ARG is non-nil and a positive number, Gnus will use that as the startup level. If ARG is non-nil and not a positive number, Gnus will prompt the user for the name of an NNTP server to use. \(fn &optional ARG DONT-CONNECT SLAVE)" t nil) ;;;*** ;;;### (autoloads (gnus-agent-regenerate gnus-agent-batch gnus-agent-batch-fetch ;;;;;; gnus-agent-find-parameter gnus-agent-possibly-alter-active ;;;;;; gnus-agent-get-undownloaded-list gnus-agent-delete-group ;;;;;; gnus-agent-rename-group gnus-agent-possibly-save-gcc gnus-agentize ;;;;;; gnus-slave-unplugged gnus-plugged gnus-unplugged) "gnus-agent" ;;;;;; "gnus/gnus-agent.el" (19259 35419)) ;;; Generated autoloads from gnus/gnus-agent.el (autoload 'gnus-unplugged "gnus-agent" "\ Start Gnus unplugged. \(fn)" t nil) (autoload 'gnus-plugged "gnus-agent" "\ Start Gnus plugged. \(fn)" t nil) (autoload 'gnus-slave-unplugged "gnus-agent" "\ Read news as a slave unplugged. \(fn &optional ARG)" t nil) (autoload 'gnus-agentize "gnus-agent" "\ Allow Gnus to be an offline newsreader. The gnus-agentize function is now called internally by gnus when gnus-agent is set. If you wish to avoid calling gnus-agentize, customize gnus-agent to nil. This will modify the `gnus-setup-news-hook', and `message-send-mail-real-function' variables, and install the Gnus agent minor mode in all Gnus buffers. \(fn)" t nil) (autoload 'gnus-agent-possibly-save-gcc "gnus-agent" "\ Save GCC if Gnus is unplugged. \(fn)" nil nil) (autoload 'gnus-agent-rename-group "gnus-agent" "\ Rename fully-qualified OLD-GROUP as NEW-GROUP. Always updates the agent, even when disabled, as the old agent files would corrupt gnus when the agent was next enabled. Depends upon the caller to determine whether group renaming is supported. \(fn OLD-GROUP NEW-GROUP)" nil nil) (autoload 'gnus-agent-delete-group "gnus-agent" "\ Delete fully-qualified GROUP. Always updates the agent, even when disabled, as the old agent files would corrupt gnus when the agent was next enabled. Depends upon the caller to determine whether group deletion is supported. \(fn GROUP)" nil nil) (autoload 'gnus-agent-get-undownloaded-list "gnus-agent" "\ Construct list of articles that have not been downloaded. \(fn)" nil nil) (autoload 'gnus-agent-possibly-alter-active "gnus-agent" "\ Possibly expand a group's active range to include articles downloaded into the agent. \(fn GROUP ACTIVE &optional INFO)" nil nil) (autoload 'gnus-agent-find-parameter "gnus-agent" "\ Search for GROUPs SYMBOL in the group's parameters, the group's topic parameters, the group's category, or the customizable variables. Returns the first non-nil value found. \(fn GROUP SYMBOL)" nil nil) (autoload 'gnus-agent-batch-fetch "gnus-agent" "\ Start Gnus and fetch session. \(fn)" t nil) (autoload 'gnus-agent-batch "gnus-agent" "\ Start Gnus, send queue and fetch session. \(fn)" t nil) (autoload 'gnus-agent-regenerate "gnus-agent" "\ Regenerate all agent covered files. If CLEAN, obsolete (ignore). \(fn &optional CLEAN REREAD)" t nil) ;;;*** ;;;### (autoloads (gnus-article-prepare-display) "gnus-art" "gnus/gnus-art.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gnus-art.el (autoload 'gnus-article-prepare-display "gnus-art" "\ Make the current buffer look like a nice article. \(fn)" nil nil) ;;;*** ;;;### (autoloads (gnus-audio-play) "gnus-audio" "gnus/gnus-audio.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gnus-audio.el (autoload 'gnus-audio-play "gnus-audio" "\ Play a sound FILE through the speaker. \(fn FILE)" t nil) ;;;*** ;;;### (autoloads (gnus-bookmark-bmenu-list gnus-bookmark-jump gnus-bookmark-set) ;;;;;; "gnus-bookmark" "gnus/gnus-bookmark.el" (19259 35419)) ;;; Generated autoloads from gnus/gnus-bookmark.el (autoload 'gnus-bookmark-set "gnus-bookmark" "\ Set a bookmark for this article. \(fn)" t nil) (autoload 'gnus-bookmark-jump "gnus-bookmark" "\ Jump to a Gnus bookmark (BMK-NAME). \(fn &optional BMK-NAME)" t nil) (autoload 'gnus-bookmark-bmenu-list "gnus-bookmark" "\ Display a list of existing Gnus bookmarks. The list is displayed in a buffer named `*Gnus Bookmark List*'. The leftmost column displays a D if the bookmark is flagged for deletion, or > if it is flagged for displaying. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-cache-delete-group gnus-cache-rename-group ;;;;;; gnus-cache-generate-nov-databases gnus-cache-generate-active ;;;;;; gnus-jog-cache) "gnus-cache" "gnus/gnus-cache.el" (19259 ;;;;;; 35419)) ;;; Generated autoloads from gnus/gnus-cache.el (autoload 'gnus-jog-cache "gnus-cache" "\ Go through all groups and put the articles into the cache. Usage: $ emacs -batch -l ~/.emacs -l gnus -f gnus-jog-cache \(fn)" t nil) (autoload 'gnus-cache-generate-active "gnus-cache" "\ Generate the cache active file. \(fn &optional DIRECTORY)" t nil) (autoload 'gnus-cache-generate-nov-databases "gnus-cache" "\ Generate NOV files recursively starting in DIR. \(fn DIR)" t nil) (autoload 'gnus-cache-rename-group "gnus-cache" "\ Rename OLD-GROUP as NEW-GROUP. Always updates the cache, even when disabled, as the old cache files would corrupt Gnus when the cache was next enabled. It depends on the caller to determine whether group renaming is supported. \(fn OLD-GROUP NEW-GROUP)" nil nil) (autoload 'gnus-cache-delete-group "gnus-cache" "\ Delete GROUP from the cache. Always updates the cache, even when disabled, as the old cache files would corrupt gnus when the cache was next enabled. Depends upon the caller to determine whether group deletion is supported. \(fn GROUP)" nil nil) ;;;*** ;;;### (autoloads (gnus-delay-initialize gnus-delay-send-queue gnus-delay-article) ;;;;;; "gnus-delay" "gnus/gnus-delay.el" (19259 35419)) ;;; Generated autoloads from gnus/gnus-delay.el (autoload 'gnus-delay-article "gnus-delay" "\ Delay this article by some time. DELAY is a string, giving the length of the time. Possible values are: * <digits><units> for <units> in minutes (`m'), hours (`h'), days (`d'), weeks (`w'), months (`M'), or years (`Y'); * YYYY-MM-DD for a specific date. The time of day is given by the variable `gnus-delay-default-hour', minute and second are zero. * hh:mm for a specific time. Use 24h format. If it is later than this time, then the deadline is tomorrow, else today. \(fn DELAY)" t nil) (autoload 'gnus-delay-send-queue "gnus-delay" "\ Send all the delayed messages that are due now. \(fn)" t nil) (autoload 'gnus-delay-initialize "gnus-delay" "\ Initialize the gnus-delay package. This sets up a key binding in `message-mode' to delay a message. This tells Gnus to look for delayed messages after getting new news. The optional arg NO-KEYMAP is ignored. Checking delayed messages is skipped if optional arg NO-CHECK is non-nil. \(fn &optional NO-KEYMAP NO-CHECK)" nil nil) ;;;*** ;;;### (autoloads (gnus-user-format-function-D gnus-user-format-function-d) ;;;;;; "gnus-diary" "gnus/gnus-diary.el" (19259 35420)) ;;; Generated autoloads from gnus/gnus-diary.el (autoload 'gnus-user-format-function-d "gnus-diary" "\ Not documented \(fn HEADER)" nil nil) (autoload 'gnus-user-format-function-D "gnus-diary" "\ Not documented \(fn HEADER)" nil nil) ;;;*** ;;;### (autoloads (turn-on-gnus-dired-mode) "gnus-dired" "gnus/gnus-dired.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from gnus/gnus-dired.el (autoload 'turn-on-gnus-dired-mode "gnus-dired" "\ Convenience method to turn on gnus-dired-mode. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-draft-reminder) "gnus-draft" "gnus/gnus-draft.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from gnus/gnus-draft.el (autoload 'gnus-draft-reminder "gnus-draft" "\ Reminder user if there are unsent drafts. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-convert-png-to-face gnus-convert-face-to-png ;;;;;; gnus-face-from-file gnus-x-face-from-file gnus-insert-random-x-face-header ;;;;;; gnus-random-x-face) "gnus-fun" "gnus/gnus-fun.el" (19259 ;;;;;; 35420)) ;;; Generated autoloads from gnus/gnus-fun.el (autoload 'gnus-random-x-face "gnus-fun" "\ Return X-Face header data chosen randomly from `gnus-x-face-directory'. \(fn)" t nil) (autoload 'gnus-insert-random-x-face-header "gnus-fun" "\ Insert a random X-Face header from `gnus-x-face-directory'. \(fn)" t nil) (autoload 'gnus-x-face-from-file "gnus-fun" "\ Insert an X-Face header based on an image file. Depending on `gnus-convert-image-to-x-face-command' it may accept different input formats. \(fn FILE)" t nil) (autoload 'gnus-face-from-file "gnus-fun" "\ Return a Face header based on an image file. Depending on `gnus-convert-image-to-face-command' it may accept different input formats. \(fn FILE)" t nil) (autoload 'gnus-convert-face-to-png "gnus-fun" "\ Convert FACE (which is base64-encoded) to a PNG. The PNG is returned as a string. \(fn FACE)" nil nil) (autoload 'gnus-convert-png-to-face "gnus-fun" "\ Convert FILE to a Face. FILE should be a PNG file that's 48x48 and smaller than or equal to 726 bytes. \(fn FILE)" nil nil) ;;;*** ;;;### (autoloads (gnus-fetch-group-other-frame gnus-fetch-group) ;;;;;; "gnus-group" "gnus/gnus-group.el" (19259 35420)) ;;; Generated autoloads from gnus/gnus-group.el (autoload 'gnus-fetch-group "gnus-group" "\ Start Gnus if necessary and enter GROUP. If ARTICLES, display those articles. Returns whether the fetching was successful or not. \(fn GROUP &optional ARTICLES)" t nil) (autoload 'gnus-fetch-group-other-frame "gnus-group" "\ Pop up a frame and enter GROUP. \(fn GROUP)" t nil) ;;;*** ;;;### (autoloads (gnus-batch-score) "gnus-kill" "gnus/gnus-kill.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gnus-kill.el (defalias 'gnus-batch-kill 'gnus-batch-score) (autoload 'gnus-batch-score "gnus-kill" "\ Run batched scoring. Usage: emacs -batch -l ~/.emacs -l gnus -f gnus-batch-score \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-mailing-list-mode gnus-mailing-list-insinuate ;;;;;; turn-on-gnus-mailing-list-mode) "gnus-ml" "gnus/gnus-ml.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gnus-ml.el (autoload 'turn-on-gnus-mailing-list-mode "gnus-ml" "\ Not documented \(fn)" nil nil) (autoload 'gnus-mailing-list-insinuate "gnus-ml" "\ Setup group parameters from List-Post header. If FORCE is non-nil, replace the old ones. \(fn &optional FORCE)" t nil) (autoload 'gnus-mailing-list-mode "gnus-ml" "\ Minor mode for providing mailing-list commands. \\{gnus-mailing-list-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (gnus-group-split-fancy gnus-group-split gnus-group-split-update ;;;;;; gnus-group-split-setup) "gnus-mlspl" "gnus/gnus-mlspl.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gnus-mlspl.el (autoload 'gnus-group-split-setup "gnus-mlspl" "\ Set up the split for `nnmail-split-fancy'. Sets things up so that nnmail-split-fancy is used for mail splitting, and defines the variable nnmail-split-fancy according with group parameters. If AUTO-UPDATE is non-nil (prefix argument accepted, if called interactively), it makes sure nnmail-split-fancy is re-computed before getting new mail, by adding `gnus-group-split-update' to `nnmail-pre-get-new-mail-hook'. A non-nil CATCH-ALL replaces the current value of `gnus-group-split-default-catch-all-group'. This variable is only used by gnus-group-split-update, and only when its CATCH-ALL argument is nil. This argument may contain any fancy split, that will be added as the last split in a `|' split produced by `gnus-group-split-fancy', unless overridden by any group marked as a catch-all group. Typical uses are as simple as the name of a default mail group, but more elaborate fancy splits may also be useful to split mail that doesn't match any of the group-specified splitting rules. See `gnus-group-split-fancy' for details. \(fn &optional AUTO-UPDATE CATCH-ALL)" t nil) (autoload 'gnus-group-split-update "gnus-mlspl" "\ Computes nnmail-split-fancy from group params and CATCH-ALL. It does this by calling by calling (gnus-group-split-fancy nil nil CATCH-ALL). If CATCH-ALL is nil, `gnus-group-split-default-catch-all-group' is used instead. This variable is set by `gnus-group-split-setup'. \(fn &optional CATCH-ALL)" t nil) (autoload 'gnus-group-split "gnus-mlspl" "\ Use information from group parameters in order to split mail. See `gnus-group-split-fancy' for more information. `gnus-group-split' is a valid value for `nnmail-split-methods'. \(fn)" nil nil) (autoload 'gnus-group-split-fancy "gnus-mlspl" "\ Uses information from group parameters in order to split mail. It can be embedded into `nnmail-split-fancy' lists with the SPLIT \(: gnus-group-split-fancy GROUPS NO-CROSSPOST CATCH-ALL) GROUPS may be a regular expression or a list of group names, that will be used to select candidate groups. If it is omitted or nil, all existing groups are considered. if NO-CROSSPOST is omitted or nil, a & split will be returned, otherwise, a | split, that does not allow crossposting, will be returned. For each selected group, a SPLIT is composed like this: if SPLIT-SPEC is specified, this split is returned as-is (unless it is nil: in this case, the group is ignored). Otherwise, if TO-ADDRESS, TO-LIST and/or EXTRA-ALIASES are specified, a regexp that matches any of them is constructed (extra-aliases may be a list). Additionally, if SPLIT-REGEXP is specified, the regexp will be extended so that it matches this regexp too, and if SPLIT-EXCLUDE is specified, RESTRICT clauses will be generated. If CATCH-ALL is nil, no catch-all handling is performed, regardless of catch-all marks in group parameters. Otherwise, if there is no selected group whose SPLIT-REGEXP matches the empty string, nor is there a selected group whose SPLIT-SPEC is 'catch-all, this fancy split (say, a group name) will be appended to the returned SPLIT list, as the last element of a '| SPLIT. For example, given the following group parameters: nnml:mail.bar: \((to-address . \"bar@femail.com\") (split-regexp . \".*@femail\\\\.com\")) nnml:mail.foo: \((to-list . \"foo@nowhere.gov\") (extra-aliases \"foo@localhost\" \"foo-redist@home\") (split-exclude \"bugs-foo\" \"rambling-foo\") (admin-address . \"foo-request@nowhere.gov\")) nnml:mail.others: \((split-spec . catch-all)) Calling (gnus-group-split-fancy nil nil \"mail.others\") returns: \(| (& (any \"\\\\(bar@femail\\\\.com\\\\|.*@femail\\\\.com\\\\)\" \"mail.bar\") (any \"\\\\(foo@nowhere\\\\.gov\\\\|foo@localhost\\\\|foo-redist@home\\\\)\" - \"bugs-foo\" - \"rambling-foo\" \"mail.foo\")) \"mail.others\") \(fn &optional GROUPS NO-CROSSPOST CATCH-ALL)" nil nil) ;;;*** ;;;### (autoloads (gnus-change-server) "gnus-move" "gnus/gnus-move.el" ;;;;;; (19259 35419)) ;;; Generated autoloads from gnus/gnus-move.el (autoload 'gnus-change-server "gnus-move" "\ Move from FROM-SERVER to TO-SERVER. Update the .newsrc.eld file to reflect the change of nntp server. \(fn FROM-SERVER TO-SERVER)" t nil) ;;;*** ;;;### (autoloads (gnus-button-reply gnus-button-mailto gnus-msg-mail) ;;;;;; "gnus-msg" "gnus/gnus-msg.el" (19259 35419)) ;;; Generated autoloads from gnus/gnus-msg.el (autoload 'gnus-msg-mail "gnus-msg" "\ Start editing a mail message to be sent. Like `message-mail', but with Gnus paraphernalia, particularly the Gcc: header for archiving purposes. \(fn &optional TO SUBJECT OTHER-HEADERS CONTINUE SWITCH-ACTION YANK-ACTION SEND-ACTIONS)" t nil) (autoload 'gnus-button-mailto "gnus-msg" "\ Mail to ADDRESS. \(fn ADDRESS)" nil nil) (autoload 'gnus-button-reply "gnus-msg" "\ Like `message-reply'. \(fn &optional TO-ADDRESS WIDE)" t nil) (define-mail-user-agent 'gnus-user-agent 'gnus-msg-mail 'message-send-and-exit 'message-kill-buffer 'message-send-hook) ;;;*** ;;;### (autoloads (gnus-nocem-load-cache gnus-nocem-scan-groups) ;;;;;; "gnus-nocem" "gnus/gnus-nocem.el" (19259 35420)) ;;; Generated autoloads from gnus/gnus-nocem.el (autoload 'gnus-nocem-scan-groups "gnus-nocem" "\ Scan all NoCeM groups for new NoCeM messages. \(fn)" t nil) (autoload 'gnus-nocem-load-cache "gnus-nocem" "\ Load the NoCeM cache. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-treat-newsgroups-picon gnus-treat-mail-picon ;;;;;; gnus-treat-from-picon) "gnus-picon" "gnus/gnus-picon.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from gnus/gnus-picon.el (autoload 'gnus-treat-from-picon "gnus-picon" "\ Display picons in the From header. If picons are already displayed, remove them. \(fn)" t nil) (autoload 'gnus-treat-mail-picon "gnus-picon" "\ Display picons in the Cc and To headers. If picons are already displayed, remove them. \(fn)" t nil) (autoload 'gnus-treat-newsgroups-picon "gnus-picon" "\ Display picons in the Newsgroups and Followup-To headers. If picons are already displayed, remove them. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-add-to-sorted-list gnus-sorted-nunion gnus-sorted-union ;;;;;; gnus-sorted-nintersection gnus-sorted-range-intersection ;;;;;; gnus-sorted-intersection gnus-intersection gnus-sorted-complement ;;;;;; gnus-sorted-ndifference gnus-sorted-difference) "gnus-range" ;;;;;; "gnus/gnus-range.el" (19259 35420)) ;;; Generated autoloads from gnus/gnus-range.el (autoload 'gnus-sorted-difference "gnus-range" "\ Return a list of elements of LIST1 that do not appear in LIST2. Both lists have to be sorted over <. The tail of LIST1 is not copied. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-sorted-ndifference "gnus-range" "\ Return a list of elements of LIST1 that do not appear in LIST2. Both lists have to be sorted over <. LIST1 is modified. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-sorted-complement "gnus-range" "\ Return a list of elements that are in LIST1 or LIST2 but not both. Both lists have to be sorted over <. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-intersection "gnus-range" "\ Not documented \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-sorted-intersection "gnus-range" "\ Return intersection of LIST1 and LIST2. LIST1 and LIST2 have to be sorted over <. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-sorted-range-intersection "gnus-range" "\ Return intersection of RANGE1 and RANGE2. RANGE1 and RANGE2 have to be sorted over <. \(fn RANGE1 RANGE2)" nil nil) (defalias 'gnus-set-sorted-intersection 'gnus-sorted-nintersection) (autoload 'gnus-sorted-nintersection "gnus-range" "\ Return intersection of LIST1 and LIST2 by modifying cdr pointers of LIST1. LIST1 and LIST2 have to be sorted over <. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-sorted-union "gnus-range" "\ Return union of LIST1 and LIST2. LIST1 and LIST2 have to be sorted over <. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-sorted-nunion "gnus-range" "\ Return union of LIST1 and LIST2 by modifying cdr pointers of LIST1. LIST1 and LIST2 have to be sorted over <. \(fn LIST1 LIST2)" nil nil) (autoload 'gnus-add-to-sorted-list "gnus-range" "\ Add NUM into sorted LIST by side effect. \(fn LIST NUM)" nil nil) ;;;*** ;;;### (autoloads (gnus-registry-install-hooks gnus-registry-initialize) ;;;;;; "gnus-registry" "gnus/gnus-registry.el" (19259 35420)) ;;; Generated autoloads from gnus/gnus-registry.el (autoload 'gnus-registry-initialize "gnus-registry" "\ Initialize the Gnus registry. \(fn)" t nil) (autoload 'gnus-registry-install-hooks "gnus-registry" "\ Install the registry hooks. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-sieve-article-add-rule gnus-sieve-generate ;;;;;; gnus-sieve-update) "gnus-sieve" "gnus/gnus-sieve.el" (19259 ;;;;;; 35420)) ;;; Generated autoloads from gnus/gnus-sieve.el (autoload 'gnus-sieve-update "gnus-sieve" "\ Update the Sieve script in gnus-sieve-file, by replacing the region between gnus-sieve-region-start and gnus-sieve-region-end with \(gnus-sieve-script gnus-sieve-select-method gnus-sieve-crosspost), then execute gnus-sieve-update-shell-command. See the documentation for these variables and functions for details. \(fn)" t nil) (autoload 'gnus-sieve-generate "gnus-sieve" "\ Generate the Sieve script in gnus-sieve-file, by replacing the region between gnus-sieve-region-start and gnus-sieve-region-end with \(gnus-sieve-script gnus-sieve-select-method gnus-sieve-crosspost). See the documentation for these variables and functions for details. \(fn)" t nil) (autoload 'gnus-sieve-article-add-rule "gnus-sieve" "\ Not documented \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-batch-brew-soup) "gnus-soup" "gnus/gnus-soup.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from gnus/gnus-soup.el (autoload 'gnus-batch-brew-soup "gnus-soup" "\ Brew a SOUP packet from groups mention on the command line. Will use the remaining command line arguments as regular expressions for matching on group names. For instance, if you want to brew on all the nnml groups, as well as groups with \"emacs\" in the name, you could say something like: $ emacs -batch -f gnus-batch-brew-soup ^nnml \".*emacs.*\" Note -- this function hasn't been implemented yet. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-update-format) "gnus-spec" "gnus/gnus-spec.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from gnus/gnus-spec.el (autoload 'gnus-update-format "gnus-spec" "\ Update the format specification near point. \(fn VAR)" t nil) ;;;*** ;;;### (autoloads (gnus-fixup-nnimap-unread-after-getting-new-news ;;;;;; gnus-declare-backend) "gnus-start" "gnus/gnus-start.el" (19259 ;;;;;; 35420)) ;;; Generated autoloads from gnus/gnus-start.el (autoload 'gnus-declare-backend "gnus-start" "\ Declare back end NAME with ABILITIES as a Gnus back end. \(fn NAME &rest ABILITIES)" nil nil) (autoload 'gnus-fixup-nnimap-unread-after-getting-new-news "gnus-start" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads (gnus-add-configuration) "gnus-win" "gnus/gnus-win.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from gnus/gnus-win.el (autoload 'gnus-add-configuration "gnus-win" "\ Add the window configuration CONF to `gnus-buffer-configuration'. \(fn CONF)" nil nil) ;;;*** ;;;### (autoloads (gomoku) "gomoku" "play/gomoku.el" (19259 35420)) ;;; Generated autoloads from play/gomoku.el (autoload 'gomoku "gomoku" "\ Start a Gomoku game between you and Emacs. If a game is in progress, this command allow you to resume it. If optional arguments N and M are given, an N by M board is used. If prefix arg is given for N, M is prompted for. You and Emacs play in turn by marking a free square. You mark it with X and Emacs marks it with O. The winner is the first to get five contiguous marks horizontally, vertically or in diagonal. You play by moving the cursor over the square you choose and hitting \\<gomoku-mode-map>\\[gomoku-human-plays]. This program actually plays a simplified or archaic version of the Gomoku game, and ought to be upgraded to use the full modern rules. Use \\[describe-mode] for more info. \(fn &optional N M)" t nil) ;;;*** ;;;### (autoloads (goto-address-prog-mode goto-address-mode goto-address ;;;;;; goto-address-at-point) "goto-addr" "net/goto-addr.el" (19259 ;;;;;; 35420)) ;;; Generated autoloads from net/goto-addr.el (define-obsolete-function-alias 'goto-address-at-mouse 'goto-address-at-point "22.1") (autoload 'goto-address-at-point "goto-addr" "\ Send to the e-mail address or load the URL at point. Send mail to address at point. See documentation for `goto-address-find-address-at-point'. If no address is found there, then load the URL at or before point. \(fn &optional EVENT)" t nil) (autoload 'goto-address "goto-addr" "\ Sets up goto-address functionality in the current buffer. Allows user to use mouse/keyboard command to click to go to a URL or to send e-mail. By default, goto-address binds `goto-address-at-point' to mouse-2 and C-c RET only on URLs and e-mail addresses. Also fontifies the buffer appropriately (see `goto-address-fontify-p' and `goto-address-highlight-p' for more information). \(fn)" t nil) (put 'goto-address 'safe-local-eval-function t) (autoload 'goto-address-mode "goto-addr" "\ Minor mode to buttonize URLs and e-mail addresses in the current buffer. \(fn &optional ARG)" t nil) (autoload 'goto-address-prog-mode "goto-addr" "\ Turn on `goto-address-mode', but only in comments and strings. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (zrgrep rgrep lgrep grep-find grep grep-mode grep-compute-defaults ;;;;;; grep-process-setup grep-setup-hook grep-find-command grep-command ;;;;;; grep-window-height) "grep" "progmodes/grep.el" (19259 35420)) ;;; Generated autoloads from progmodes/grep.el (defvar grep-window-height nil "\ *Number of lines in a grep window. If nil, use `compilation-window-height'.") (custom-autoload 'grep-window-height "grep" t) (defvar grep-command nil "\ The default grep command for \\[grep]. If the grep program used supports an option to always include file names in its output (such as the `-H' option to GNU grep), it's a good idea to include it when specifying `grep-command'. In interactive usage, the actual value of this variable is set up by `grep-compute-defaults'; to change the default value, use Customize or call the function `grep-apply-setting'.") (custom-autoload 'grep-command "grep" nil) (defvar grep-find-command nil "\ The default find command for \\[grep-find]. In interactive usage, the actual value of this variable is set up by `grep-compute-defaults'; to change the default value, use Customize or call the function `grep-apply-setting'.") (custom-autoload 'grep-find-command "grep" nil) (defvar grep-setup-hook nil "\ List of hook functions run by `grep-process-setup' (see `run-hooks').") (custom-autoload 'grep-setup-hook "grep" t) (defconst grep-regexp-alist '(("^\\(.+?\\)\\(:[ ]*\\)\\([0-9]+\\)\\2" 1 3) ("^\\(\\(.+?\\):\\([0-9]+\\):\\).*?\\(\\[01;31m\\(?:\\[K\\)?\\)\\(.*?\\)\\(\\[[0-9]*m\\)" 2 3 ((lambda nil (setq compilation-error-screen-columns nil) (- (match-beginning 4) (match-end 1))) lambda nil (- (match-end 5) (match-end 1) (- (match-end 4) (match-beginning 4)))) nil 1) ("^Binary file \\(.+\\) matches$" 1 nil nil 0 1)) "\ Regexp used to match grep hits. See `compilation-error-regexp-alist'.") (defvar grep-program (purecopy "grep") "\ The default grep program for `grep-command' and `grep-find-command'. This variable's value takes effect when `grep-compute-defaults' is called.") (defvar find-program (purecopy "find") "\ The default find program for `grep-find-command'. This variable's value takes effect when `grep-compute-defaults' is called.") (defvar xargs-program (purecopy "xargs") "\ The default xargs program for `grep-find-command'. See `grep-find-use-xargs'. This variable's value takes effect when `grep-compute-defaults' is called.") (defvar grep-find-use-xargs nil "\ Non-nil means that `grep-find' uses the `xargs' utility by default. If `exec', use `find -exec'. If `gnu', use `find -print0' and `xargs -0'. Any other non-nil value means to use `find -print' and `xargs'. This variable's value takes effect when `grep-compute-defaults' is called.") (defvar grep-history nil) (defvar grep-find-history nil) (autoload 'grep-process-setup "grep" "\ Setup compilation variables and buffer for `grep'. Set up `compilation-exit-message-function' and run `grep-setup-hook'. \(fn)" nil nil) (autoload 'grep-compute-defaults "grep" "\ Not documented \(fn)" nil nil) (autoload 'grep-mode "grep" "\ Sets `grep-last-buffer' and `compilation-window-height'. \(fn)" nil nil) (autoload 'grep "grep" "\ Run grep, with user-specified args, and collect output in a buffer. While grep runs asynchronously, you can use \\[next-error] (M-x next-error), or \\<grep-mode-map>\\[compile-goto-error] in the grep output buffer, to go to the lines where grep found matches. For doing a recursive `grep', see the `rgrep' command. For running `grep' in a specific directory, see `lgrep'. This command uses a special history list for its COMMAND-ARGS, so you can easily repeat a grep command. A prefix argument says to default the argument based upon the current tag the cursor is over, substituting it into the last grep command in the grep command history (or into `grep-command' if that history list is empty). \(fn COMMAND-ARGS)" t nil) (autoload 'grep-find "grep" "\ Run grep via find, with user-specified args COMMAND-ARGS. Collect output in a buffer. While find runs asynchronously, you can use the \\[next-error] command to find the text that grep hits refer to. This command uses a special history list for its arguments, so you can easily repeat a find command. \(fn COMMAND-ARGS)" t nil) (defalias 'find-grep 'grep-find) (autoload 'lgrep "grep" "\ Run grep, searching for REGEXP in FILES in directory DIR. The search is limited to file names matching shell pattern FILES. FILES may use abbreviations defined in `grep-files-aliases', e.g. entering `ch' is equivalent to `*.[ch]'. With \\[universal-argument] prefix, you can edit the constructed shell command line before it is executed. With two \\[universal-argument] prefixes, directly edit and run `grep-command'. Collect output in a buffer. While grep runs asynchronously, you can use \\[next-error] (M-x next-error), or \\<grep-mode-map>\\[compile-goto-error] in the grep output buffer, to go to the lines where grep found matches. This command shares argument histories with \\[rgrep] and \\[grep]. \(fn REGEXP &optional FILES DIR CONFIRM)" t nil) (autoload 'rgrep "grep" "\ Recursively grep for REGEXP in FILES in directory tree rooted at DIR. The search is limited to file names matching shell pattern FILES. FILES may use abbreviations defined in `grep-files-aliases', e.g. entering `ch' is equivalent to `*.[ch]'. With \\[universal-argument] prefix, you can edit the constructed shell command line before it is executed. With two \\[universal-argument] prefixes, directly edit and run `grep-find-command'. Collect output in a buffer. While find runs asynchronously, you can use \\[next-error] (M-x next-error), or \\<grep-mode-map>\\[compile-goto-error] in the grep output buffer, to go to the lines where grep found matches. This command shares argument histories with \\[lgrep] and \\[grep-find]. \(fn REGEXP &optional FILES DIR CONFIRM)" t nil) (autoload 'zrgrep "grep" "\ Recursively grep for REGEXP in gzipped FILES in tree rooted at DIR. Like `rgrep' but uses `zgrep' for `grep-program', sets the default file name to `*.gz', and sets `grep-highlight-matches' to `always'. \(fn REGEXP &optional FILES DIR CONFIRM GREP-FIND-TEMPLATE)" t nil) (defalias 'rzgrep 'zrgrep) ;;;*** ;;;### (autoloads (gs-load-image) "gs" "gs.el" (19259 35420)) ;;; Generated autoloads from gs.el (autoload 'gs-load-image "gs" "\ Load a PS image for display on FRAME. SPEC is an image specification, IMG-HEIGHT and IMG-WIDTH are width and height of the image in pixels. WINDOW-AND-PIXMAP-ID is a string of the form \"WINDOW-ID PIXMAP-ID\". Value is non-nil if successful. \(fn FRAME SPEC IMG-WIDTH IMG-HEIGHT WINDOW-AND-PIXMAP-ID PIXEL-COLORS)" nil nil) ;;;*** ;;;### (autoloads (gud-tooltip-mode gdb-script-mode jdb pdb perldb ;;;;;; xdb dbx sdb gud-gdb) "gud" "progmodes/gud.el" (19259 35420)) ;;; Generated autoloads from progmodes/gud.el (autoload 'gud-gdb "gud" "\ Run gdb on program FILE in buffer *gud-FILE*. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. \(fn COMMAND-LINE)" t nil) (autoload 'sdb "gud" "\ Run sdb on program FILE in buffer *gud-FILE*. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. \(fn COMMAND-LINE)" t nil) (autoload 'dbx "gud" "\ Run dbx on program FILE in buffer *gud-FILE*. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. \(fn COMMAND-LINE)" t nil) (autoload 'xdb "gud" "\ Run xdb on program FILE in buffer *gud-FILE*. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. You can set the variable `gud-xdb-directories' to a list of program source directories if your program contains sources from more than one directory. \(fn COMMAND-LINE)" t nil) (autoload 'perldb "gud" "\ Run perldb on program FILE in buffer *gud-FILE*. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. \(fn COMMAND-LINE)" t nil) (autoload 'pdb "gud" "\ Run pdb on program FILE in buffer `*gud-FILE*'. The directory containing FILE becomes the initial working directory and source-file directory for your debugger. \(fn COMMAND-LINE)" t nil) (autoload 'jdb "gud" "\ Run jdb with command line COMMAND-LINE in a buffer. The buffer is named \"*gud*\" if no initial class is given or \"*gud-<initial-class-basename>*\" if there is. If the \"-classpath\" switch is given, omit all whitespace between it and its value. See `gud-jdb-use-classpath' and `gud-jdb-classpath' documentation for information on how jdb accesses source files. Alternatively (if `gud-jdb-use-classpath' is nil), see `gud-jdb-directories' for the original source file access method. For general information about commands available to control jdb from gud, see `gud-mode'. \(fn COMMAND-LINE)" t nil) (add-hook 'same-window-regexps (purecopy "\\*gud-.*\\*\\(\\|<[0-9]+>\\)")) (add-to-list 'auto-mode-alist (cons (purecopy "/\\.[a-z0-9-]*gdbinit") 'gdb-script-mode)) (autoload 'gdb-script-mode "gud" "\ Major mode for editing GDB scripts. \(fn)" t nil) (defvar gud-tooltip-mode nil "\ Non-nil if Gud-Tooltip mode is enabled. See the command `gud-tooltip-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `gud-tooltip-mode'.") (custom-autoload 'gud-tooltip-mode "gud" nil) (autoload 'gud-tooltip-mode "gud" "\ Toggle the display of GUD tooltips. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (handwrite) "handwrite" "play/handwrite.el" (19259 ;;;;;; 35420)) ;;; Generated autoloads from play/handwrite.el (autoload 'handwrite "handwrite" "\ Turns the buffer into a \"handwritten\" document. The functions `handwrite-10pt', `handwrite-11pt', `handwrite-12pt' and `handwrite-13pt' set up for various sizes of output. Variables: handwrite-linespace (default 12) handwrite-fontsize (default 11) handwrite-numlines (default 60) handwrite-pagenumbering (default nil) \(fn)" t nil) ;;;*** ;;;### (autoloads (hanoi-unix-64 hanoi-unix hanoi) "hanoi" "play/hanoi.el" ;;;;;; (19259 35420)) ;;; Generated autoloads from play/hanoi.el (autoload 'hanoi "hanoi" "\ Towers of Hanoi diversion. Use NRINGS rings. \(fn NRINGS)" t nil) (autoload 'hanoi-unix "hanoi" "\ Towers of Hanoi, UNIX doomsday version. Displays 32-ring towers that have been progressing at one move per second since 1970-01-01 00:00:00 GMT. Repent before ring 31 moves. \(fn)" t nil) (autoload 'hanoi-unix-64 "hanoi" "\ Like hanoi-unix, but pretend to have a 64-bit clock. This is, necessarily (as of Emacs 20.3), a crock. When the current-time interface is made s2G-compliant, hanoi.el will need to be updated. \(fn)" t nil) ;;;*** ;;;### (autoloads (mail-check-payment mail-add-payment-async mail-add-payment ;;;;;; hashcash-verify-payment hashcash-insert-payment-async hashcash-insert-payment) ;;;;;; "hashcash" "mail/hashcash.el" (19259 35420)) ;;; Generated autoloads from mail/hashcash.el (autoload 'hashcash-insert-payment "hashcash" "\ Insert X-Payment and X-Hashcash headers with a payment for ARG \(fn ARG)" t nil) (autoload 'hashcash-insert-payment-async "hashcash" "\ Insert X-Payment and X-Hashcash headers with a payment for ARG Only start calculation. Results are inserted when ready. \(fn ARG)" t nil) (autoload 'hashcash-verify-payment "hashcash" "\ Verify a hashcash payment \(fn TOKEN &optional RESOURCE AMOUNT)" nil nil) (autoload 'mail-add-payment "hashcash" "\ Add X-Payment: and X-Hashcash: headers with a hashcash payment for each recipient address. Prefix arg sets default payment temporarily. Set ASYNC to t to start asynchronous calculation. (See `mail-add-payment-async'). \(fn &optional ARG ASYNC)" t nil) (autoload 'mail-add-payment-async "hashcash" "\ Add X-Payment: and X-Hashcash: headers with a hashcash payment for each recipient address. Prefix arg sets default payment temporarily. Calculation is asynchronous. \(fn &optional ARG)" t nil) (autoload 'mail-check-payment "hashcash" "\ Look for a valid X-Payment: or X-Hashcash: header. Prefix arg sets default accept amount temporarily. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (scan-buf-previous-region scan-buf-next-region ;;;;;; scan-buf-move-to-region help-at-pt-display-when-idle help-at-pt-set-timer ;;;;;; help-at-pt-cancel-timer display-local-help help-at-pt-kbd-string ;;;;;; help-at-pt-string) "help-at-pt" "help-at-pt.el" (19259 35421)) ;;; Generated autoloads from help-at-pt.el (autoload 'help-at-pt-string "help-at-pt" "\ Return the help-echo string at point. Normally, the string produced by the `help-echo' text or overlay property, or nil, is returned. If KBD is non-nil, `kbd-help' is used instead, and any `help-echo' property is ignored. In this case, the return value can also be t, if that is the value of the `kbd-help' property. \(fn &optional KBD)" nil nil) (autoload 'help-at-pt-kbd-string "help-at-pt" "\ Return the keyboard help string at point. If the `kbd-help' text or overlay property at point produces a string, return it. Otherwise, use the `help-echo' property. If this produces no string either, return nil. \(fn)" nil nil) (autoload 'display-local-help "help-at-pt" "\ Display local help in the echo area. This displays a short help message, namely the string produced by the `kbd-help' property at point. If `kbd-help' does not produce a string, but the `help-echo' property does, then that string is printed instead. A numeric argument ARG prevents display of a message in case there is no help. While ARG can be used interactively, it is mainly meant for use from Lisp. \(fn &optional ARG)" t nil) (autoload 'help-at-pt-cancel-timer "help-at-pt" "\ Cancel any timer set by `help-at-pt-set-timer'. This disables `help-at-pt-display-when-idle'. \(fn)" t nil) (autoload 'help-at-pt-set-timer "help-at-pt" "\ Enable `help-at-pt-display-when-idle'. This is done by setting a timer, if none is currently active. \(fn)" t nil) (defvar help-at-pt-display-when-idle 'never "\ Automatically show local help on point-over. If the value is t, the string obtained from any `kbd-help' or `help-echo' property at point is automatically printed in the echo area, if nothing else is already displayed there, or after a quit. If both `kbd-help' and `help-echo' produce help strings, `kbd-help' is used. If the value is a list, the help only gets printed if there is a text or overlay property at point that is included in this list. Suggested properties are `keymap', `local-map', `button' and `kbd-help'. Any value other than t or a non-empty list disables the feature. This variable only takes effect after a call to `help-at-pt-set-timer'. The help gets printed after Emacs has been idle for `help-at-pt-timer-delay' seconds. You can call `help-at-pt-cancel-timer' to cancel the timer set by, and the effect of, `help-at-pt-set-timer'. When this variable is set through Custom, `help-at-pt-set-timer' is called automatically, unless the value is `never', in which case `help-at-pt-cancel-timer' is called. Specifying an empty list of properties through Custom will set the timer, thus enabling buffer local values. It sets the actual value to nil. Thus, Custom distinguishes between a nil value and other values that disable the feature, which Custom identifies with `never'. The default is `never'.") (custom-autoload 'help-at-pt-display-when-idle "help-at-pt" nil) (autoload 'scan-buf-move-to-region "help-at-pt" "\ Go to the start of the next region with non-nil PROP property. Then run HOOK, which should be a quoted symbol that is a normal hook variable, or an expression evaluating to such a symbol. Adjacent areas with different non-nil PROP properties are considered different regions. With numeric argument ARG, move to the start of the ARGth next such region, then run HOOK. If ARG is negative, move backward. If point is already in a region, then that region does not count toward ARG. If ARG is 0 and point is inside a region, move to the start of that region. If ARG is 0 and point is not in a region, print a message to that effect, but do not move point and do not run HOOK. If there are not enough regions to move over, an error results and the number of available regions is mentioned in the error message. Point is not moved and HOOK is not run. \(fn PROP &optional ARG HOOK)" nil nil) (autoload 'scan-buf-next-region "help-at-pt" "\ Go to the start of the next region with non-nil help-echo. Print the help found there using `display-local-help'. Adjacent areas with different non-nil help-echo properties are considered different regions. With numeric argument ARG, move to the start of the ARGth next help-echo region. If ARG is negative, move backward. If point is already in a help-echo region, then that region does not count toward ARG. If ARG is 0 and point is inside a help-echo region, move to the start of that region. If ARG is 0 and point is not in such a region, just print a message to that effect. If there are not enough regions to move over, an error results and the number of available regions is mentioned in the error message. A potentially confusing subtlety is that point can be in a help-echo region without any local help being available. This is because `help-echo' can be a function evaluating to nil. This rarely happens in practice. \(fn &optional ARG)" t nil) (autoload 'scan-buf-previous-region "help-at-pt" "\ Go to the start of the previous region with non-nil help-echo. Print the help found there using `display-local-help'. Adjacent areas with different non-nil help-echo properties are considered different regions. With numeric argument ARG, behaves like `scan-buf-next-region' with argument -ARG. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (describe-categories describe-syntax describe-variable ;;;;;; variable-at-point describe-function-1 find-lisp-object-file-name ;;;;;; help-C-file-name describe-function) "help-fns" "help-fns.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from help-fns.el (autoload 'describe-function "help-fns" "\ Display the full documentation of FUNCTION (a symbol). \(fn FUNCTION)" t nil) (autoload 'help-C-file-name "help-fns" "\ Return the name of the C file where SUBR-OR-VAR is defined. KIND should be `var' for a variable or `subr' for a subroutine. \(fn SUBR-OR-VAR KIND)" nil nil) (autoload 'find-lisp-object-file-name "help-fns" "\ Guess the file that defined the Lisp object OBJECT, of type TYPE. OBJECT should be a symbol associated with a function, variable, or face; alternatively, it can be a function definition. If TYPE is `variable', search for a variable definition. If TYPE is `face', search for a face definition. If TYPE is the value returned by `symbol-function' for a function symbol, search for a function definition. The return value is the absolute name of a readable file where OBJECT is defined. If several such files exist, preference is given to a file found via `load-path'. The return value can also be `C-source', which means that OBJECT is a function or variable defined in C. If no suitable file is found, return nil. \(fn OBJECT TYPE)" nil nil) (autoload 'describe-function-1 "help-fns" "\ Not documented \(fn FUNCTION)" nil nil) (autoload 'variable-at-point "help-fns" "\ Return the bound variable symbol found at or before point. Return 0 if there is no such symbol. If ANY-SYMBOL is non-nil, don't insist the symbol be bound. \(fn &optional ANY-SYMBOL)" nil nil) (autoload 'describe-variable "help-fns" "\ Display the full documentation of VARIABLE (a symbol). Returns the documentation as a string, also. If VARIABLE has a buffer-local value in BUFFER or FRAME \(default to the current buffer and current frame), it is displayed along with the global value. \(fn VARIABLE &optional BUFFER FRAME)" t nil) (autoload 'describe-syntax "help-fns" "\ Describe the syntax specifications in the syntax table of BUFFER. The descriptions are inserted in a help buffer, which is then displayed. BUFFER defaults to the current buffer. \(fn &optional BUFFER)" t nil) (autoload 'describe-categories "help-fns" "\ Describe the category specifications in the current category table. The descriptions are inserted in a buffer, which is then displayed. If BUFFER is non-nil, then describe BUFFER's category table instead. BUFFER should be a buffer or a buffer name. \(fn &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (three-step-help) "help-macro" "help-macro.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from help-macro.el (defvar three-step-help nil "\ Non-nil means give more info about Help command in three steps. The three steps are simple prompt, prompt with all options, and window listing and describing the options. A value of nil means skip the middle step, so that \\[help-command] \\[help-command] gives the window that lists the options.") (custom-autoload 'three-step-help "help-macro" t) ;;;*** ;;;### (autoloads (help-xref-on-pp help-insert-xref-button help-xref-button ;;;;;; help-make-xrefs help-buffer help-setup-xref help-mode-finish ;;;;;; help-mode-setup help-mode) "help-mode" "help-mode.el" (19259 ;;;;;; 35421)) ;;; Generated autoloads from help-mode.el (autoload 'help-mode "help-mode" "\ Major mode for viewing help text and navigating references in it. Entry to this mode runs the normal hook `help-mode-hook'. Commands: \\{help-mode-map} \(fn)" t nil) (autoload 'help-mode-setup "help-mode" "\ Not documented \(fn)" nil nil) (autoload 'help-mode-finish "help-mode" "\ Not documented \(fn)" nil nil) (autoload 'help-setup-xref "help-mode" "\ Invoked from commands using the \"*Help*\" buffer to install some xref info. ITEM is a (FUNCTION . ARGS) pair appropriate for recreating the help buffer after following a reference. INTERACTIVE-P is non-nil if the calling command was invoked interactively. In this case the stack of items for help buffer \"back\" buttons is cleared. This should be called very early, before the output buffer is cleared, because we want to record the \"previous\" position of point so we can restore it properly when going back. \(fn ITEM INTERACTIVE-P)" nil nil) (autoload 'help-buffer "help-mode" "\ Return the name of a buffer for inserting help. If `help-xref-following' is non-nil, this is the name of the current buffer. Otherwise, it is *Help*; if no buffer with that name currently exists, it is created. \(fn)" nil nil) (autoload 'help-make-xrefs "help-mode" "\ Parse and hyperlink documentation cross-references in the given BUFFER. Find cross-reference information in a buffer and activate such cross references for selection with `help-follow'. Cross-references have the canonical form `...' and the type of reference may be disambiguated by the preceding word(s) used in `help-xref-symbol-regexp'. Faces only get cross-referenced if preceded or followed by the word `face'. Variables without variable documentation do not get cross-referenced, unless preceded by the word `variable' or `option'. If the variable `help-xref-mule-regexp' is non-nil, find also cross-reference information related to multilingual environment \(e.g., coding-systems). This variable is also used to disambiguate the type of reference as the same way as `help-xref-symbol-regexp'. A special reference `back' is made to return back through a stack of help buffers. Variable `help-back-label' specifies the text for that. \(fn &optional BUFFER)" t nil) (autoload 'help-xref-button "help-mode" "\ Make a hyperlink for cross-reference text previously matched. MATCH-NUMBER is the subexpression of interest in the last matched regexp. TYPE is the type of button to use. Any remaining arguments are passed to the button's help-function when it is invoked. See `help-make-xrefs'. \(fn MATCH-NUMBER TYPE &rest ARGS)" nil nil) (autoload 'help-insert-xref-button "help-mode" "\ Insert STRING and make a hyperlink from cross-reference text on it. TYPE is the type of button to use. Any remaining arguments are passed to the button's help-function when it is invoked. See `help-make-xrefs'. \(fn STRING TYPE &rest ARGS)" nil nil) (autoload 'help-xref-on-pp "help-mode" "\ Add xrefs for symbols in `pp's output between FROM and TO. \(fn FROM TO)" nil nil) ;;;*** ;;;### (autoloads (Helper-help Helper-describe-bindings) "helper" ;;;;;; "emacs-lisp/helper.el" (19259 35421)) ;;; Generated autoloads from emacs-lisp/helper.el (autoload 'Helper-describe-bindings "helper" "\ Describe local key bindings of current mode. \(fn)" t nil) (autoload 'Helper-help "helper" "\ Provide help for current mode. \(fn)" t nil) ;;;*** ;;;### (autoloads (hexlify-buffer hexl-find-file hexl-mode) "hexl" ;;;;;; "hexl.el" (19259 35421)) ;;; Generated autoloads from hexl.el (autoload 'hexl-mode "hexl" "\ \\<hexl-mode-map>A mode for editing binary files in hex dump format. This is not an ordinary major mode; it alters some aspects of the current mode's behavior, but not all; also, you can exit Hexl mode and return to the previous mode using `hexl-mode-exit'. This function automatically converts a buffer into the hexl format using the function `hexlify-buffer'. Each line in the buffer has an \"address\" (displayed in hexadecimal) representing the offset into the file that the characters on this line are at and 16 characters from the file (displayed as hexadecimal values grouped every 16 bits) and as their ASCII values. If any of the characters (displayed as ASCII characters) are unprintable (control or meta characters) they will be replaced as periods. If `hexl-mode' is invoked with an argument the buffer is assumed to be in hexl format. A sample format: HEX ADDR: 0001 0203 0405 0607 0809 0a0b 0c0d 0e0f ASCII-TEXT -------- ---- ---- ---- ---- ---- ---- ---- ---- ---------------- 00000000: 5468 6973 2069 7320 6865 786c 2d6d 6f64 This is hexl-mod 00000010: 652e 2020 4561 6368 206c 696e 6520 7265 e. Each line re 00000020: 7072 6573 656e 7473 2031 3620 6279 7465 presents 16 byte 00000030: 7320 6173 2068 6578 6164 6563 696d 616c s as hexadecimal 00000040: 2041 5343 4949 0a61 6e64 2070 7269 6e74 ASCII.and print 00000050: 6162 6c65 2041 5343 4949 2063 6861 7261 able ASCII chara 00000060: 6374 6572 732e 2020 416e 7920 636f 6e74 cters. Any cont 00000070: 726f 6c20 6f72 206e 6f6e 2d41 5343 4949 rol or non-ASCII 00000080: 2063 6861 7261 6374 6572 730a 6172 6520 characters.are 00000090: 6469 7370 6c61 7965 6420 6173 2070 6572 displayed as per 000000a0: 696f 6473 2069 6e20 7468 6520 7072 696e iods in the prin 000000b0: 7461 626c 6520 6368 6172 6163 7465 7220 table character 000000c0: 7265 6769 6f6e 2e0a region.. Movement is as simple as movement in a normal Emacs text buffer. Most cursor movement bindings are the same (ie. Use \\[hexl-backward-char], \\[hexl-forward-char], \\[hexl-next-line], and \\[hexl-previous-line] to move the cursor left, right, down, and up). Advanced cursor movement commands (ala \\[hexl-beginning-of-line], \\[hexl-end-of-line], \\[hexl-beginning-of-buffer], and \\[hexl-end-of-buffer]) are also supported. There are several ways to change text in hexl mode: ASCII characters (character between space (0x20) and tilde (0x7E)) are bound to self-insert so you can simply type the character and it will insert itself (actually overstrike) into the buffer. \\[hexl-quoted-insert] followed by another keystroke allows you to insert the key even if it isn't bound to self-insert. An octal number can be supplied in place of another key to insert the octal number's ASCII representation. \\[hexl-insert-hex-char] will insert a given hexadecimal value (if it is between 0 and 0xFF) into the buffer at the current point. \\[hexl-insert-octal-char] will insert a given octal value (if it is between 0 and 0377) into the buffer at the current point. \\[hexl-insert-decimal-char] will insert a given decimal value (if it is between 0 and 255) into the buffer at the current point. \\[hexl-mode-exit] will exit hexl-mode. Note: saving the file with any of the usual Emacs commands will actually convert it back to binary format while saving. You can use \\[hexl-find-file] to visit a file in Hexl mode. \\[describe-bindings] for advanced commands. \(fn &optional ARG)" t nil) (autoload 'hexl-find-file "hexl" "\ Edit file FILENAME as a binary file in hex dump format. Switch to a buffer visiting file FILENAME, creating one if none exists, and edit the file in `hexl-mode'. \(fn FILENAME)" t nil) (autoload 'hexlify-buffer "hexl" "\ Convert a binary buffer to hexl format. This discards the buffer's undo information. \(fn)" t nil) ;;;*** ;;;### (autoloads (hi-lock-write-interactive-patterns hi-lock-unface-buffer ;;;;;; hi-lock-face-phrase-buffer hi-lock-face-buffer hi-lock-line-face-buffer ;;;;;; global-hi-lock-mode hi-lock-mode) "hi-lock" "hi-lock.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from hi-lock.el (autoload 'hi-lock-mode "hi-lock" "\ Toggle minor mode for interactively adding font-lock highlighting patterns. If ARG positive, turn hi-lock on. Issuing a hi-lock command will also turn hi-lock on. To turn hi-lock on in all buffers use `global-hi-lock-mode' or in your .emacs file (global-hi-lock-mode 1). When hi-lock is turned on, a \"Regexp Highlighting\" submenu is added to the \"Edit\" menu. The commands in the submenu, which can be called interactively, are: \\[highlight-regexp] REGEXP FACE Highlight matches of pattern REGEXP in current buffer with FACE. \\[highlight-phrase] PHRASE FACE Highlight matches of phrase PHRASE in current buffer with FACE. (PHRASE can be any REGEXP, but spaces will be replaced by matches to whitespace and initial lower-case letters will become case insensitive.) \\[highlight-lines-matching-regexp] REGEXP FACE Highlight lines containing matches of REGEXP in current buffer with FACE. \\[unhighlight-regexp] REGEXP Remove highlighting on matches of REGEXP in current buffer. \\[hi-lock-write-interactive-patterns] Write active REGEXPs into buffer as comments (if possible). They may be read the next time file is loaded or when the \\[hi-lock-find-patterns] command is issued. The inserted regexps are in the form of font lock keywords. (See `font-lock-keywords'.) They may be edited and re-loaded with \\[hi-lock-find-patterns], any valid `font-lock-keywords' form is acceptable. When a file is loaded the patterns are read if `hi-lock-file-patterns-policy' is 'ask and the user responds y to the prompt, or if `hi-lock-file-patterns-policy' is bound to a function and that function returns t. \\[hi-lock-find-patterns] Re-read patterns stored in buffer (in the format produced by \\[hi-lock-write-interactive-patterns]). When hi-lock is started and if the mode is not excluded or patterns rejected, the beginning of the buffer is searched for lines of the form: Hi-lock: FOO where FOO is a list of patterns. These are added to the font lock keywords already present. The patterns must start before position \(number of characters into buffer) `hi-lock-file-patterns-range'. Patterns will be read until Hi-lock: end is found. A mode is excluded if it's in the list `hi-lock-exclude-modes'. \(fn &optional ARG)" t nil) (defvar global-hi-lock-mode nil "\ Non-nil if Global-Hi-Lock mode is enabled. See the command `global-hi-lock-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-hi-lock-mode'.") (custom-autoload 'global-hi-lock-mode "hi-lock" nil) (autoload 'global-hi-lock-mode "hi-lock" "\ Toggle Hi-Lock mode in every possible buffer. With prefix ARG, turn Global-Hi-Lock mode on if and only if ARG is positive. Hi-Lock mode is enabled in all buffers where `turn-on-hi-lock-if-enabled' would do it. See `hi-lock-mode' for more information on Hi-Lock mode. \(fn &optional ARG)" t nil) (defalias 'highlight-lines-matching-regexp 'hi-lock-line-face-buffer) (autoload 'hi-lock-line-face-buffer "hi-lock" "\ Set face of all lines containing a match of REGEXP to FACE. Interactively, prompt for REGEXP then FACE. Buffer-local history list maintained for regexps, global history maintained for faces. \\<minibuffer-local-map>Use \\[previous-history-element] to retrieve previous history items, and \\[next-history-element] to retrieve default values. \(See info node `Minibuffer History'.) \(fn REGEXP &optional FACE)" t nil) (defalias 'highlight-regexp 'hi-lock-face-buffer) (autoload 'hi-lock-face-buffer "hi-lock" "\ Set face of each match of REGEXP to FACE. Interactively, prompt for REGEXP then FACE. Buffer-local history list maintained for regexps, global history maintained for faces. \\<minibuffer-local-map>Use \\[previous-history-element] to retrieve previous history items, and \\[next-history-element] to retrieve default values. \(See info node `Minibuffer History'.) \(fn REGEXP &optional FACE)" t nil) (defalias 'highlight-phrase 'hi-lock-face-phrase-buffer) (autoload 'hi-lock-face-phrase-buffer "hi-lock" "\ Set face of each match of phrase REGEXP to FACE. Whitespace in REGEXP converted to arbitrary whitespace and initial lower-case letters made case insensitive. \(fn REGEXP &optional FACE)" t nil) (defalias 'unhighlight-regexp 'hi-lock-unface-buffer) (autoload 'hi-lock-unface-buffer "hi-lock" "\ Remove highlighting of each match to REGEXP set by hi-lock. Interactively, prompt for REGEXP. Buffer-local history of inserted regexp's maintained. Will accept only regexps inserted by hi-lock interactive functions. (See `hi-lock-interactive-patterns'.) \\<minibuffer-local-must-match-map>Use \\[minibuffer-complete] to complete a partially typed regexp. \(See info node `Minibuffer History'.) \(fn REGEXP)" t nil) (autoload 'hi-lock-write-interactive-patterns "hi-lock" "\ Write interactively added patterns, if any, into buffer at point. Interactively added patterns are those normally specified using `highlight-regexp' and `highlight-lines-matching-regexp'; they can be found in variable `hi-lock-interactive-patterns'. \(fn)" t nil) ;;;*** ;;;### (autoloads (hide-ifdef-mode) "hideif" "progmodes/hideif.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from progmodes/hideif.el (autoload 'hide-ifdef-mode "hideif" "\ Toggle Hide-Ifdef mode. This is a minor mode, albeit a large one. With ARG, turn Hide-Ifdef mode on if arg is positive, off otherwise. In Hide-Ifdef mode, code within #ifdef constructs that the C preprocessor would eliminate may be hidden from view. Several variables affect how the hiding is done: `hide-ifdef-env' An association list of defined and undefined symbols for the current buffer. Initially, the global value of `hide-ifdef-env' is used. `hide-ifdef-define-alist' An association list of defined symbol lists. Use `hide-ifdef-set-define-alist' to save the current `hide-ifdef-env' and `hide-ifdef-use-define-alist' to set the current `hide-ifdef-env' from one of the lists in `hide-ifdef-define-alist'. `hide-ifdef-lines' Set to non-nil to not show #if, #ifdef, #ifndef, #else, and #endif lines when hiding. `hide-ifdef-initially' Indicates whether `hide-ifdefs' should be called when Hide-Ifdef mode is activated. `hide-ifdef-read-only' Set to non-nil if you want to make buffers read only while hiding. After `show-ifdefs', read-only status is restored to previous value. \\{hide-ifdef-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (turn-off-hideshow hs-minor-mode) "hideshow" "progmodes/hideshow.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from progmodes/hideshow.el (defvar hs-special-modes-alist (mapcar 'purecopy '((c-mode "{" "}" "/[*/]" nil nil) (c++-mode "{" "}" "/[*/]" nil nil) (bibtex-mode ("@\\S(*\\(\\s(\\)" 1)) (java-mode "{" "}" "/[*/]" nil nil) (js-mode "{" "}" "/[*/]" nil))) "\ *Alist for initializing the hideshow variables for different modes. Each element has the form (MODE START END COMMENT-START FORWARD-SEXP-FUNC ADJUST-BEG-FUNC). If non-nil, hideshow will use these values as regexps to define blocks and comments, respectively for major mode MODE. START, END and COMMENT-START are regular expressions. A block is defined as text surrounded by START and END. As a special case, START may be a list of the form (COMPLEX-START MDATA-SELECTOR), where COMPLEX-START is a regexp w/ multiple parts and MDATA-SELECTOR an integer that specifies which sub-match is the proper place to adjust point, before calling `hs-forward-sexp-func'. Point is adjusted to the beginning of the specified match. For example, see the `hs-special-modes-alist' entry for `bibtex-mode'. For some major modes, `forward-sexp' does not work properly. In those cases, FORWARD-SEXP-FUNC specifies another function to use instead. See the documentation for `hs-adjust-block-beginning' to see what is the use of ADJUST-BEG-FUNC. If any of the elements is left nil or omitted, hideshow tries to guess appropriate values. The regexps should not contain leading or trailing whitespace. Case does not matter.") (autoload 'hs-minor-mode "hideshow" "\ Minor mode to selectively hide/show code and comment blocks. When hideshow minor mode is on, the menu bar is augmented with hideshow commands and the hideshow commands are enabled. The value '(hs . t) is added to `buffer-invisibility-spec'. The main commands are: `hs-hide-all', `hs-show-all', `hs-hide-block', `hs-show-block', `hs-hide-level' and `hs-toggle-hiding'. There is also `hs-hide-initial-comment-block' and `hs-mouse-toggle-hiding'. Turning hideshow minor mode off reverts the menu bar and the variables to default values and disables the hideshow commands. Lastly, the normal hook `hs-minor-mode-hook' is run using `run-hooks'. Key bindings: \\{hs-minor-mode-map} \(fn &optional ARG)" t nil) (autoload 'turn-off-hideshow "hideshow" "\ Unconditionally turn off `hs-minor-mode'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (global-highlight-changes-mode highlight-compare-with-file ;;;;;; highlight-compare-buffers highlight-changes-rotate-faces ;;;;;; highlight-changes-previous-change highlight-changes-next-change ;;;;;; highlight-changes-remove-highlight highlight-changes-visible-mode ;;;;;; highlight-changes-mode) "hilit-chg" "hilit-chg.el" (19259 ;;;;;; 35421)) ;;; Generated autoloads from hilit-chg.el (autoload 'highlight-changes-mode "hilit-chg" "\ Toggle Highlight Changes mode. With ARG, turn Highlight Changes mode on if and only if arg is positive. In Highlight Changes mode changes are recorded with a text property. Normally they are displayed in a distinctive face, but command \\[highlight-changes-visible-mode] can be used to toggles this on and off. Other functions for buffers in this mode include: \\[highlight-changes-next-change] - move point to beginning of next change \\[highlight-changes-previous-change] - move to beginning of previous change \\[highlight-changes-remove-highlight] - remove the change face from the region \\[highlight-changes-rotate-faces] - rotate different \"ages\" of changes through various faces. \\[highlight-compare-with-file] - mark text as changed by comparing this buffer with the contents of a file \\[highlight-compare-buffers] highlights differences between two buffers. \(fn &optional ARG)" t nil) (autoload 'highlight-changes-visible-mode "hilit-chg" "\ Toggle visiblility of changes when buffer is in Highlight Changes mode. This mode only has an effect when Highlight Changes mode is on. It allows toggling between whether or not the changed text is displayed in a distinctive face. The default value can be customized with variable `highlight-changes-visibility-initial-state' This command does not itself set highlight-changes mode. \(fn &optional ARG)" t nil) (autoload 'highlight-changes-remove-highlight "hilit-chg" "\ Remove the change face from the region between BEG and END. This allows you to manually remove highlighting from uninteresting changes. \(fn BEG END)" t nil) (autoload 'highlight-changes-next-change "hilit-chg" "\ Move to the beginning of the next change, if in Highlight Changes mode. \(fn)" t nil) (autoload 'highlight-changes-previous-change "hilit-chg" "\ Move to the beginning of the previous change, if in Highlight Changes mode. \(fn)" t nil) (autoload 'highlight-changes-rotate-faces "hilit-chg" "\ Rotate the faces if in Highlight Changes mode and the changes are visible. Current changes are displayed in the face described by the first element of `highlight-changes-face-list', one level older changes are shown in face described by the second element, and so on. Very old changes remain shown in the last face in the list. You can automatically rotate colors when the buffer is saved by adding this function to `write-file-functions' as a buffer-local value. To do this, eval the following in the buffer to be saved: (add-hook 'write-file-functions 'highlight-changes-rotate-faces nil t) \(fn)" t nil) (autoload 'highlight-compare-buffers "hilit-chg" "\ Compare two buffers and highlight the differences. The default is the current buffer and the one in the next window. If either buffer is modified and is visiting a file, you are prompted to save the file. Unless the buffer is unmodified and visiting a file, the buffer is written to a temporary file for comparison. If a buffer is read-only, differences will be highlighted but no property changes are made, so \\[highlight-changes-next-change] and \\[highlight-changes-previous-change] will not work. \(fn BUF-A BUF-B)" t nil) (autoload 'highlight-compare-with-file "hilit-chg" "\ Compare this buffer with a file, and highlight differences. If the buffer has a backup filename, it is used as the default when this function is called interactively. If the current buffer is visiting the file being compared against, it also will have its differences highlighted. Otherwise, the file is read in temporarily but the buffer is deleted. If the buffer is read-only, differences will be highlighted but no property changes are made, so \\[highlight-changes-next-change] and \\[highlight-changes-previous-change] will not work. \(fn FILE-B)" t nil) (defvar global-highlight-changes-mode nil "\ Non-nil if Global-Highlight-Changes mode is enabled. See the command `global-highlight-changes-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-highlight-changes-mode'.") (custom-autoload 'global-highlight-changes-mode "hilit-chg" nil) (autoload 'global-highlight-changes-mode "hilit-chg" "\ Toggle Highlight-Changes mode in every possible buffer. With prefix ARG, turn Global-Highlight-Changes mode on if and only if ARG is positive. Highlight-Changes mode is enabled in all buffers where `highlight-changes-mode-turn-on' would do it. See `highlight-changes-mode' for more information on Highlight-Changes mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (make-hippie-expand-function hippie-expand hippie-expand-only-buffers ;;;;;; hippie-expand-ignore-buffers hippie-expand-max-buffers hippie-expand-no-restriction ;;;;;; hippie-expand-dabbrev-as-symbol hippie-expand-dabbrev-skip-space ;;;;;; hippie-expand-verbose hippie-expand-try-functions-list) "hippie-exp" ;;;;;; "hippie-exp.el" (19259 35421)) ;;; Generated autoloads from hippie-exp.el (defvar hippie-expand-try-functions-list '(try-complete-file-name-partially try-complete-file-name try-expand-all-abbrevs try-expand-list try-expand-line try-expand-dabbrev try-expand-dabbrev-all-buffers try-expand-dabbrev-from-kill try-complete-lisp-symbol-partially try-complete-lisp-symbol) "\ The list of expansion functions tried in order by `hippie-expand'. To change the behavior of `hippie-expand', remove, change the order of, or insert functions in this list.") (custom-autoload 'hippie-expand-try-functions-list "hippie-exp" t) (defvar hippie-expand-verbose t "\ Non-nil makes `hippie-expand' output which function it is trying.") (custom-autoload 'hippie-expand-verbose "hippie-exp" t) (defvar hippie-expand-dabbrev-skip-space nil "\ Non-nil means tolerate trailing spaces in the abbreviation to expand.") (custom-autoload 'hippie-expand-dabbrev-skip-space "hippie-exp" t) (defvar hippie-expand-dabbrev-as-symbol t "\ Non-nil means expand as symbols, i.e. syntax `_' is considered a letter.") (custom-autoload 'hippie-expand-dabbrev-as-symbol "hippie-exp" t) (defvar hippie-expand-no-restriction t "\ Non-nil means that narrowed buffers are widened during search.") (custom-autoload 'hippie-expand-no-restriction "hippie-exp" t) (defvar hippie-expand-max-buffers nil "\ The maximum number of buffers (apart from the current) searched. If nil, all buffers are searched.") (custom-autoload 'hippie-expand-max-buffers "hippie-exp" t) (defvar hippie-expand-ignore-buffers (list (purecopy "^ \\*.*\\*$") 'dired-mode) "\ A list specifying which buffers not to search (if not current). Can contain both regexps matching buffer names (as strings) and major modes \(as atoms)") (custom-autoload 'hippie-expand-ignore-buffers "hippie-exp" t) (defvar hippie-expand-only-buffers nil "\ A list specifying the only buffers to search (in addition to current). Can contain both regexps matching buffer names (as strings) and major modes \(as atoms). If non-nil, this variable overrides the variable `hippie-expand-ignore-buffers'.") (custom-autoload 'hippie-expand-only-buffers "hippie-exp" t) (autoload 'hippie-expand "hippie-exp" "\ Try to expand text before point, using multiple methods. The expansion functions in `hippie-expand-try-functions-list' are tried in order, until a possible expansion is found. Repeated application of `hippie-expand' inserts successively possible expansions. With a positive numeric argument, jumps directly to the ARG next function in this list. With a negative argument or just \\[universal-argument], undoes the expansion. \(fn ARG)" t nil) (autoload 'make-hippie-expand-function "hippie-exp" "\ Construct a function similar to `hippie-expand'. Make it use the expansion functions in TRY-LIST. An optional second argument VERBOSE non-nil makes the function verbose. \(fn TRY-LIST &optional VERBOSE)" nil (quote macro)) ;;;*** ;;;### (autoloads (global-hl-line-mode hl-line-mode) "hl-line" "hl-line.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from hl-line.el (autoload 'hl-line-mode "hl-line" "\ Buffer-local minor mode to highlight the line about point. With ARG, turn Hl-Line mode on if ARG is positive, off otherwise. If `hl-line-sticky-flag' is non-nil, Hl-Line mode highlights the line about the buffer's point in all windows. Caveat: the buffer's point might be different from the point of a non-selected window. Hl-Line mode uses the function `hl-line-highlight' on `post-command-hook' in this case. When `hl-line-sticky-flag' is nil, Hl-Line mode highlights the line about point in the selected window only. In this case, it uses the function `hl-line-unhighlight' on `pre-command-hook' in addition to `hl-line-highlight' on `post-command-hook'. \(fn &optional ARG)" t nil) (defvar global-hl-line-mode nil "\ Non-nil if Global-Hl-Line mode is enabled. See the command `global-hl-line-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-hl-line-mode'.") (custom-autoload 'global-hl-line-mode "hl-line" nil) (autoload 'global-hl-line-mode "hl-line" "\ Global minor mode to highlight the line about point in the current window. With ARG, turn Global-Hl-Line mode on if ARG is positive, off otherwise. Global-Hl-Line mode uses the functions `global-hl-line-unhighlight' and `global-hl-line-highlight' on `pre-command-hook' and `post-command-hook'. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (list-holidays holidays holiday-solar-holidays ;;;;;; holiday-bahai-holidays holiday-islamic-holidays holiday-christian-holidays ;;;;;; holiday-hebrew-holidays holiday-other-holidays holiday-local-holidays ;;;;;; holiday-oriental-holidays holiday-general-holidays) "holidays" ;;;;;; "calendar/holidays.el" (19259 35421)) ;;; Generated autoloads from calendar/holidays.el (defvar holiday-general-holidays (mapcar 'purecopy '((holiday-fixed 1 1 "New Year's Day") (holiday-float 1 1 3 "Martin Luther King Day") (holiday-fixed 2 2 "Groundhog Day") (holiday-fixed 2 14 "Valentine's Day") (holiday-float 2 1 3 "President's Day") (holiday-fixed 3 17 "St. Patrick's Day") (holiday-fixed 4 1 "April Fools' Day") (holiday-float 5 0 2 "Mother's Day") (holiday-float 5 1 -1 "Memorial Day") (holiday-fixed 6 14 "Flag Day") (holiday-float 6 0 3 "Father's Day") (holiday-fixed 7 4 "Independence Day") (holiday-float 9 1 1 "Labor Day") (holiday-float 10 1 2 "Columbus Day") (holiday-fixed 10 31 "Halloween") (holiday-fixed 11 11 "Veteran's Day") (holiday-float 11 4 4 "Thanksgiving"))) "\ General holidays. Default value is for the United States. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-general-holidays "holidays" t) (put 'holiday-general-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'general-holidays 'holiday-general-holidays "23.1") (defvar holiday-oriental-holidays (mapcar 'purecopy '((holiday-chinese-new-year) (if calendar-chinese-all-holidays-flag (append (holiday-chinese 1 15 "Lantern Festival") (holiday-chinese-qingming) (holiday-chinese 5 5 "Dragon Boat Festival") (holiday-chinese 7 7 "Double Seventh Festival") (holiday-chinese 8 15 "Mid-Autumn Festival") (holiday-chinese 9 9 "Double Ninth Festival") (holiday-chinese-winter-solstice))))) "\ Oriental holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-oriental-holidays "holidays" t) (put 'holiday-oriental-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'oriental-holidays 'holiday-oriental-holidays "23.1") (defvar holiday-local-holidays nil "\ Local holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-local-holidays "holidays" t) (put 'holiday-local-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'local-holidays 'holiday-local-holidays "23.1") (defvar holiday-other-holidays nil "\ User defined holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-other-holidays "holidays" t) (put 'holiday-other-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'other-holidays 'holiday-other-holidays "23.1") (defvar hebrew-holidays-1 (mapcar 'purecopy '((holiday-hebrew-rosh-hashanah) (if calendar-hebrew-all-holidays-flag (holiday-julian 11 (let ((m displayed-month) (y displayed-year) year) (calendar-increment-month m y -1) (setq year (calendar-extract-year (calendar-julian-from-absolute (calendar-absolute-from-gregorian (list m 1 y))))) (if (zerop (% (1+ year) 4)) 22 21)) "\"Tal Umatar\" (evening)")))) "\ Component of the old default value of `holiday-hebrew-holidays'.") (put 'hebrew-holidays-1 'risky-local-variable t) (defvar hebrew-holidays-2 (mapcar 'purecopy '((holiday-hebrew-hanukkah) (if calendar-hebrew-all-holidays-flag (holiday-hebrew 10 (let ((h-year (calendar-extract-year (calendar-hebrew-from-absolute (calendar-absolute-from-gregorian (list displayed-month 28 displayed-year)))))) (if (= 6 (% (calendar-hebrew-to-absolute (list 10 10 h-year)) 7)) 11 10)) "Tzom Teveth")) (if calendar-hebrew-all-holidays-flag (holiday-hebrew 11 15 "Tu B'Shevat")))) "\ Component of the old default value of `holiday-hebrew-holidays'.") (put 'hebrew-holidays-2 'risky-local-variable t) (defvar hebrew-holidays-3 (mapcar 'purecopy '((if calendar-hebrew-all-holidays-flag (holiday-hebrew 11 (let* ((m displayed-month) (y displayed-year) (h-year (progn (calendar-increment-month m y 1) (calendar-extract-year (calendar-hebrew-from-absolute (calendar-absolute-from-gregorian (list m (calendar-last-day-of-month m y) y)))))) (s-s (calendar-hebrew-from-absolute (if (= 6 (% (calendar-hebrew-to-absolute (list 7 1 h-year)) 7)) (calendar-dayname-on-or-before 6 (calendar-hebrew-to-absolute (list 11 17 h-year))) (calendar-dayname-on-or-before 6 (calendar-hebrew-to-absolute (list 11 16 h-year)))))) (day (calendar-extract-day s-s))) day) "Shabbat Shirah")))) "\ Component of the old default value of `holiday-hebrew-holidays'.") (put 'hebrew-holidays-3 'risky-local-variable t) (defvar hebrew-holidays-4 (mapcar 'purecopy '((holiday-hebrew-passover) (and calendar-hebrew-all-holidays-flag (let* ((m displayed-month) (y displayed-year) (year (progn (calendar-increment-month m y -1) (calendar-extract-year (calendar-julian-from-absolute (calendar-absolute-from-gregorian (list m 1 y))))))) (= 21 (% year 28))) (holiday-julian 3 26 "Kiddush HaHamah")) (if calendar-hebrew-all-holidays-flag (holiday-hebrew-tisha-b-av)))) "\ Component of the old default value of `holiday-hebrew-holidays'.") (put 'hebrew-holidays-4 'risky-local-variable t) (defvar holiday-hebrew-holidays (mapcar 'purecopy '((holiday-hebrew-passover) (holiday-hebrew-rosh-hashanah) (holiday-hebrew-hanukkah) (if calendar-hebrew-all-holidays-flag (append (holiday-hebrew-tisha-b-av) (holiday-hebrew-misc))))) "\ Jewish holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-hebrew-holidays "holidays" t) (put 'holiday-hebrew-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'hebrew-holidays 'holiday-hebrew-holidays "23.1") (defvar holiday-christian-holidays (mapcar 'purecopy '((holiday-easter-etc) (holiday-fixed 12 25 "Christmas") (if calendar-christian-all-holidays-flag (append (holiday-fixed 1 6 "Epiphany") (holiday-julian 12 25 "Eastern Orthodox Christmas") (holiday-greek-orthodox-easter) (holiday-fixed 8 15 "Assumption") (holiday-advent 0 "Advent"))))) "\ Christian holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-christian-holidays "holidays" t) (put 'holiday-christian-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'christian-holidays 'holiday-christian-holidays "23.1") (defvar holiday-islamic-holidays (mapcar 'purecopy '((holiday-islamic-new-year) (holiday-islamic 9 1 "Ramadan Begins") (if calendar-islamic-all-holidays-flag (append (holiday-islamic 1 10 "Ashura") (holiday-islamic 3 12 "Mulad-al-Nabi") (holiday-islamic 7 26 "Shab-e-Mi'raj") (holiday-islamic 8 15 "Shab-e-Bara't") (holiday-islamic 9 27 "Shab-e Qadr") (holiday-islamic 10 1 "Id-al-Fitr") (holiday-islamic 12 10 "Id-al-Adha"))))) "\ Islamic holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-islamic-holidays "holidays" t) (put 'holiday-islamic-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'islamic-holidays 'holiday-islamic-holidays "23.1") (defvar holiday-bahai-holidays (mapcar 'purecopy '((holiday-bahai-new-year) (holiday-bahai-ridvan) (holiday-fixed 5 23 "Declaration of the Bab") (holiday-fixed 5 29 "Ascension of Baha'u'llah") (holiday-fixed 7 9 "Martyrdom of the Bab") (holiday-fixed 10 20 "Birth of the Bab") (holiday-fixed 11 12 "Birth of Baha'u'llah") (if calendar-bahai-all-holidays-flag (append (holiday-fixed 11 26 "Day of the Covenant") (holiday-fixed 11 28 "Ascension of `Abdu'l-Baha"))))) "\ Baha'i holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-bahai-holidays "holidays" t) (put 'holiday-bahai-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'bahai-holidays 'holiday-bahai-holidays "23.1") (defvar holiday-solar-holidays (mapcar 'purecopy '((solar-equinoxes-solstices) (holiday-sexp calendar-daylight-savings-starts (format "Daylight Saving Time Begins %s" (solar-time-string (/ calendar-daylight-savings-starts-time (float 60)) calendar-standard-time-zone-name))) (holiday-sexp calendar-daylight-savings-ends (format "Daylight Saving Time Ends %s" (solar-time-string (/ calendar-daylight-savings-ends-time (float 60)) calendar-daylight-time-zone-name))))) "\ Sun-related holidays. See the documentation for `calendar-holidays' for details.") (custom-autoload 'holiday-solar-holidays "holidays" t) (put 'holiday-solar-holidays 'risky-local-variable t) (define-obsolete-variable-alias 'solar-holidays 'holiday-solar-holidays "23.1") (put 'calendar-holidays 'risky-local-variable t) (autoload 'holidays "holidays" "\ Display the holidays for last month, this month, and next month. If called with an optional prefix argument ARG, prompts for month and year. This function is suitable for execution in a .emacs file. \(fn &optional ARG)" t nil) (autoload 'list-holidays "holidays" "\ Display holidays for years Y1 to Y2 (inclusive). Y2 defaults to Y1. The optional list of holidays L defaults to `calendar-holidays'. If you want to control what holidays are displayed, use a different list. For example, (list-holidays 2006 2006 (append holiday-general-holidays holiday-local-holidays)) will display holidays for the year 2006 defined in the two mentioned lists, and nothing else. When called interactively, this command offers a choice of holidays, based on the variables `holiday-solar-holidays' etc. See the documentation of `calendar-holidays' for a list of the variables that control the choices, as well as a description of the format of a holiday list. The optional LABEL is used to label the buffer created. \(fn Y1 &optional Y2 L LABEL)" t nil) (defalias 'holiday-list 'list-holidays) ;;;*** ;;;### (autoloads (html2text) "html2text" "gnus/html2text.el" (19259 ;;;;;; 35421)) ;;; Generated autoloads from gnus/html2text.el (autoload 'html2text "html2text" "\ Convert HTML to plain text in the current buffer. \(fn)" t nil) ;;;*** ;;;### (autoloads (define-ibuffer-filter define-ibuffer-op define-ibuffer-sorter ;;;;;; define-ibuffer-column) "ibuf-macs" "ibuf-macs.el" (19259 ;;;;;; 35421)) ;;; Generated autoloads from ibuf-macs.el (autoload 'define-ibuffer-column "ibuf-macs" "\ Define a column SYMBOL for use with `ibuffer-formats'. BODY will be called with `buffer' bound to the buffer object, and `mark' bound to the current mark on the buffer. The original ibuffer buffer will be bound to `ibuffer-buf'. If NAME is given, it will be used as a title for the column. Otherwise, the title will default to a capitalized version of the SYMBOL's name. PROPS is a plist of additional properties to add to the text, such as `mouse-face'. And SUMMARIZER, if given, is a function which will be passed a list of all the strings in its column; it should return a string to display at the bottom. If HEADER-MOUSE-MAP is given, it will be used as a keymap for the title of the column. Note that this macro expands into a `defun' for a function named ibuffer-make-column-NAME. If INLINE is non-nil, then the form will be inlined into the compiled format versions. This means that if you change its definition, you should explicitly call `ibuffer-recompile-formats'. \(fn SYMBOL (&key NAME INLINE PROPS SUMMARIZER) &rest BODY)" nil (quote macro)) (autoload 'define-ibuffer-sorter "ibuf-macs" "\ Define a method of sorting named NAME. DOCUMENTATION is the documentation of the function, which will be called `ibuffer-do-sort-by-NAME'. DESCRIPTION is a short string describing the sorting method. For sorting, the forms in BODY will be evaluated with `a' bound to one buffer object, and `b' bound to another. BODY should return a non-nil value if and only if `a' is \"less than\" `b'. \(fn NAME DOCUMENTATION (&key DESCRIPTION) &rest BODY)" nil (quote macro)) (autoload 'define-ibuffer-op "ibuf-macs" "\ Generate a function which operates on a buffer. OP becomes the name of the function; if it doesn't begin with `ibuffer-do-', then that is prepended to it. When an operation is performed, this function will be called once for each marked buffer, with that buffer current. ARGS becomes the formal parameters of the function. DOCUMENTATION becomes the docstring of the function. INTERACTIVE becomes the interactive specification of the function. MARK describes which type of mark (:deletion, or nil) this operation uses. :deletion means the function operates on buffers marked for deletion, otherwise it acts on normally marked buffers. MODIFIER-P describes how the function modifies buffers. This is used to set the modification flag of the Ibuffer buffer itself. Valid values are: nil - the function never modifiers buffers t - the function it always modifies buffers :maybe - attempt to discover this information by comparing the buffer's modification flag. DANGEROUS is a boolean which should be set if the user should be prompted before performing this operation. OPSTRING is a string which will be displayed to the user after the operation is complete, in the form: \"Operation complete; OPSTRING x buffers\" ACTIVE-OPSTRING is a string which will be displayed to the user in a confirmation message, in the form: \"Really ACTIVE-OPSTRING x buffers?\" COMPLEX means this function is special; see the source code of this macro for exactly what it does. \(fn OP ARGS DOCUMENTATION (&key INTERACTIVE MARK MODIFIER-P DANGEROUS OPSTRING ACTIVE-OPSTRING COMPLEX) &rest BODY)" nil (quote macro)) (autoload 'define-ibuffer-filter "ibuf-macs" "\ Define a filter named NAME. DOCUMENTATION is the documentation of the function. READER is a form which should read a qualifier from the user. DESCRIPTION is a short string describing the filter. BODY should contain forms which will be evaluated to test whether or not a particular buffer should be displayed or not. The forms in BODY will be evaluated with BUF bound to the buffer object, and QUALIFIER bound to the current value of the filter. \(fn NAME DOCUMENTATION (&key READER DESCRIPTION) &rest BODY)" nil (quote macro)) ;;;*** ;;;### (autoloads (ibuffer ibuffer-other-window ibuffer-list-buffers) ;;;;;; "ibuffer" "ibuffer.el" (19259 35421)) ;;; Generated autoloads from ibuffer.el (autoload 'ibuffer-list-buffers "ibuffer" "\ Display a list of buffers, in another window. If optional argument FILES-ONLY is non-nil, then add a filter for buffers which are visiting a file. \(fn &optional FILES-ONLY)" t nil) (autoload 'ibuffer-other-window "ibuffer" "\ Like `ibuffer', but displayed in another window by default. If optional argument FILES-ONLY is non-nil, then add a filter for buffers which are visiting a file. \(fn &optional FILES-ONLY)" t nil) (autoload 'ibuffer "ibuffer" "\ Begin using Ibuffer to edit a list of buffers. Type 'h' after entering ibuffer for more information. All arguments are optional. OTHER-WINDOW-P says to use another window. NAME specifies the name of the buffer (defaults to \"*Ibuffer*\"). QUALIFIERS is an initial set of filtering qualifiers to use; see `ibuffer-filtering-qualifiers'. NOSELECT means don't select the Ibuffer buffer. SHRINK means shrink the buffer to minimal size. The special value `onewindow' means always use another window. FILTER-GROUPS is an initial set of filtering groups to use; see `ibuffer-filter-groups'. FORMATS is the value to use for `ibuffer-formats'. If specified, then the variable `ibuffer-formats' will have that value locally in this buffer. \(fn &optional OTHER-WINDOW-P NAME QUALIFIERS NOSELECT SHRINK FILTER-GROUPS FORMATS)" t nil) ;;;*** ;;;### (autoloads (icalendar-import-buffer icalendar-import-file ;;;;;; icalendar-export-region icalendar-export-file) "icalendar" ;;;;;; "calendar/icalendar.el" (19259 35421)) ;;; Generated autoloads from calendar/icalendar.el (autoload 'icalendar-export-file "icalendar" "\ Export diary file to iCalendar format. All diary entries in the file DIARY-FILENAME are converted to iCalendar format. The result is appended to the file ICAL-FILENAME. \(fn DIARY-FILENAME ICAL-FILENAME)" t nil) (autoload 'icalendar-export-region "icalendar" "\ Export region in diary file to iCalendar format. All diary entries in the region from MIN to MAX in the current buffer are converted to iCalendar format. The result is appended to the file ICAL-FILENAME. This function attempts to return t if something goes wrong. In this case an error string which describes all the errors and problems is written into the buffer `*icalendar-errors*'. \(fn MIN MAX ICAL-FILENAME)" t nil) (autoload 'icalendar-import-file "icalendar" "\ Import an iCalendar file and append to a diary file. Argument ICAL-FILENAME output iCalendar file. Argument DIARY-FILENAME input `diary-file'. Optional argument NON-MARKING determines whether events are created as non-marking or not. \(fn ICAL-FILENAME DIARY-FILENAME &optional NON-MARKING)" t nil) (autoload 'icalendar-import-buffer "icalendar" "\ Extract iCalendar events from current buffer. This function searches the current buffer for the first iCalendar object, reads it and adds all VEVENT elements to the diary DIARY-FILE. It will ask for each appointment whether to add it to the diary unless DO-NOT-ASK is non-nil. When called interactively, DO-NOT-ASK is nil, so that you are asked for each event. NON-MARKING determines whether diary events are created as non-marking. Return code t means that importing worked well, return code nil means that an error has occurred. Error messages will be in the buffer `*icalendar-errors*'. \(fn &optional DIARY-FILE DO-NOT-ASK NON-MARKING)" t nil) ;;;*** ;;;### (autoloads (icomplete-mode) "icomplete" "icomplete.el" (19259 ;;;;;; 35421)) ;;; Generated autoloads from icomplete.el (defvar icomplete-mode nil "\ Non-nil if Icomplete mode is enabled. See the command `icomplete-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `icomplete-mode'.") (custom-autoload 'icomplete-mode "icomplete" nil) (autoload 'icomplete-mode "icomplete" "\ Toggle incremental minibuffer completion for this Emacs session. With a numeric argument, turn Icomplete mode on if ARG is positive, otherwise turn it off. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (icon-mode) "icon" "progmodes/icon.el" (19259 35421)) ;;; Generated autoloads from progmodes/icon.el (autoload 'icon-mode "icon" "\ Major mode for editing Icon code. Expression and list commands understand all Icon brackets. Tab indents for Icon code. Paragraphs are separated by blank lines only. Delete converts tabs to spaces as it moves back. \\{icon-mode-map} Variables controlling indentation style: icon-tab-always-indent Non-nil means TAB in Icon mode should always reindent the current line, regardless of where in the line point is when the TAB command is used. icon-auto-newline Non-nil means automatically newline before and after braces inserted in Icon code. icon-indent-level Indentation of Icon statements within surrounding block. The surrounding block's indentation is the indentation of the line on which the open-brace appears. icon-continued-statement-offset Extra indentation given to a substatement, such as the then-clause of an if or body of a while. icon-continued-brace-offset Extra indentation given to a brace that starts a substatement. This is in addition to `icon-continued-statement-offset'. icon-brace-offset Extra indentation for line if it starts with an open brace. icon-brace-imaginary-offset An open brace following other text is treated as if it were this far to the right of the start of its line. Turning on Icon mode calls the value of the variable `icon-mode-hook' with no args, if that value is non-nil. \(fn)" t nil) ;;;*** ;;;### (autoloads (idlwave-shell) "idlw-shell" "progmodes/idlw-shell.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from progmodes/idlw-shell.el (autoload 'idlwave-shell "idlw-shell" "\ Run an inferior IDL, with I/O through buffer `(idlwave-shell-buffer)'. If buffer exists but shell process is not running, start new IDL. If buffer exists and shell process is running, just switch to the buffer. When called with a prefix ARG, or when `idlwave-shell-use-dedicated-frame' is non-nil, the shell buffer and the source buffers will be in separate frames. The command to run comes from variable `idlwave-shell-explicit-file-name', with options taken from `idlwave-shell-command-line-options'. The buffer is put in `idlwave-shell-mode', providing commands for sending input and controlling the IDL job. See help on `idlwave-shell-mode'. See also the variable `idlwave-shell-prompt-pattern'. \(Type \\[describe-mode] in the shell buffer for a list of commands.) \(fn &optional ARG QUICK)" t nil) ;;;*** ;;;### (autoloads (idlwave-mode) "idlwave" "progmodes/idlwave.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from progmodes/idlwave.el (autoload 'idlwave-mode "idlwave" "\ Major mode for editing IDL source files (version 6.1_em22). The main features of this mode are 1. Indentation and Formatting -------------------------- Like other Emacs programming modes, C-j inserts a newline and indents. TAB is used for explicit indentation of the current line. To start a continuation line, use \\[idlwave-split-line]. This function can also be used in the middle of a line to split the line at that point. When used inside a long constant string, the string is split at that point with the `+' concatenation operator. Comments are indented as follows: `;;;' Indentation remains unchanged. `;;' Indent like the surrounding code `;' Indent to a minimum column. The indentation of comments starting in column 0 is never changed. Use \\[idlwave-fill-paragraph] to refill a paragraph inside a comment. The indentation of the second line of the paragraph relative to the first will be retained. Use \\[idlwave-auto-fill-mode] to toggle auto-fill mode for these comments. When the variable `idlwave-fill-comment-line-only' is nil, code can also be auto-filled and auto-indented. To convert pre-existing IDL code to your formatting style, mark the entire buffer with \\[mark-whole-buffer] and execute \\[idlwave-expand-region-abbrevs]. Then mark the entire buffer again followed by \\[indent-region] (`indent-region'). 2. Routine Info ------------ IDLWAVE displays information about the calling sequence and the accepted keyword parameters of a procedure or function with \\[idlwave-routine-info]. \\[idlwave-find-module] jumps to the source file of a module. These commands know about system routines, all routines in idlwave-mode buffers and (when the idlwave-shell is active) about all modules currently compiled under this shell. It also makes use of pre-compiled or custom-scanned user and library catalogs many popular libraries ship with by default. Use \\[idlwave-update-routine-info] to update this information, which is also used for completion (see item 4). 3. Online IDL Help --------------- \\[idlwave-context-help] displays the IDL documentation relevant for the system variable, keyword, or routines at point. A single key stroke gets you directly to the right place in the docs. See the manual to configure where and how the HTML help is displayed. 4. Completion ---------- \\[idlwave-complete] completes the names of procedures, functions class names, keyword parameters, system variables and tags, class tags, structure tags, filenames and much more. It is context sensitive and figures out what is expected at point. Lower case strings are completed in lower case, other strings in mixed or upper case. 5. Code Templates and Abbreviations -------------------------------- Many Abbreviations are predefined to expand to code fragments and templates. The abbreviations start generally with a `\\`. Some examples: \\pr PROCEDURE template \\fu FUNCTION template \\c CASE statement template \\sw SWITCH statement template \\f FOR loop template \\r REPEAT Loop template \\w WHILE loop template \\i IF statement template \\elif IF-ELSE statement template \\b BEGIN For a full list, use \\[idlwave-list-abbrevs]. Some templates also have direct keybindings - see the list of keybindings below. \\[idlwave-doc-header] inserts a documentation header at the beginning of the current program unit (pro, function or main). Change log entries can be added to the current program unit with \\[idlwave-doc-modification]. 6. Automatic Case Conversion ------------------------- The case of reserved words and some abbrevs is controlled by `idlwave-reserved-word-upcase' and `idlwave-abbrev-change-case'. 7. Automatic END completion ------------------------ If the variable `idlwave-expand-generic-end' is non-nil, each END typed will be converted to the specific version, like ENDIF, ENDFOR, etc. 8. Hooks ----- Loading idlwave.el runs `idlwave-load-hook'. Turning on `idlwave-mode' runs `idlwave-mode-hook'. 9. Documentation and Customization ------------------------------- Info documentation for this package is available. Use \\[idlwave-info] to display (complain to your sysadmin if that does not work). For Postscript, PDF, and HTML versions of the documentation, check IDLWAVE's homepage at URL `http://idlwave.org'. IDLWAVE has customize support - see the group `idlwave'. 10.Keybindings ----------- Here is a list of all keybindings of this mode. If some of the key bindings below show with ??, use \\[describe-key] followed by the key sequence to see what the key sequence does. \\{idlwave-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (ido-completing-read ido-read-directory-name ido-read-file-name ;;;;;; ido-read-buffer ido-dired ido-insert-file ido-write-file ;;;;;; ido-find-file-other-frame ido-display-file ido-find-file-read-only-other-frame ;;;;;; ido-find-file-read-only-other-window ido-find-file-read-only ;;;;;; ido-find-alternate-file ido-find-file-other-window ido-find-file ;;;;;; ido-find-file-in-dir ido-switch-buffer-other-frame ido-insert-buffer ;;;;;; ido-kill-buffer ido-display-buffer ido-switch-buffer-other-window ;;;;;; ido-switch-buffer ido-mode ido-mode) "ido" "ido.el" (19259 ;;;;;; 35421)) ;;; Generated autoloads from ido.el (defvar ido-mode nil "\ Determines for which functional group (buffer and files) ido behavior should be enabled. The following values are possible: - `buffer': Turn only on ido buffer behavior (switching, killing, displaying...) - `file': Turn only on ido file behavior (finding, writing, inserting...) - `both': Turn on ido buffer and file behavior. - `nil': Turn off any ido switching. Setting this variable directly does not take effect; use either \\[customize] or the function `ido-mode'.") (custom-autoload 'ido-mode "ido" nil) (autoload 'ido-mode "ido" "\ Toggle ido speed-ups on or off. With ARG, turn ido speed-up on if arg is positive, off otherwise. Turning on ido-mode will remap (via a minor-mode keymap) the default keybindings for the `find-file' and `switch-to-buffer' families of commands to the ido versions of these functions. However, if ARG arg equals 'files, remap only commands for files, or if it equals 'buffers, remap only commands for buffer switching. This function also adds a hook to the minibuffer. \(fn &optional ARG)" t nil) (autoload 'ido-switch-buffer "ido" "\ Switch to another buffer. The buffer is displayed according to `ido-default-buffer-method' -- the default is to show it in the same window, unless it is already visible in another frame. As you type in a string, all of the buffers matching the string are displayed if substring-matching is used (default). Look at `ido-enable-prefix' and `ido-toggle-prefix'. When you have found the buffer you want, it can then be selected. As you type, most keys have their normal keybindings, except for the following: \\<ido-buffer-completion-map> RET Select the buffer at the front of the list of matches. If the list is empty, possibly prompt to create new buffer. \\[ido-select-text] Select the current prompt as the buffer. If no buffer is found, prompt for a new one. \\[ido-next-match] Put the first element at the end of the list. \\[ido-prev-match] Put the last element at the start of the list. \\[ido-complete] Complete a common suffix to the current string that matches all buffers. If there is only one match, select that buffer. If there is no common suffix, show a list of all matching buffers in a separate window. \\[ido-edit-input] Edit input string. \\[ido-fallback-command] Fallback to non-ido version of current command. \\[ido-toggle-regexp] Toggle regexp searching. \\[ido-toggle-prefix] Toggle between substring and prefix matching. \\[ido-toggle-case] Toggle case-sensitive searching of buffer names. \\[ido-completion-help] Show list of matching buffers in separate window. \\[ido-enter-find-file] Drop into `ido-find-file'. \\[ido-kill-buffer-at-head] Kill buffer at head of buffer list. \\[ido-toggle-ignore] Toggle ignoring buffers listed in `ido-ignore-buffers'. \(fn)" t nil) (autoload 'ido-switch-buffer-other-window "ido" "\ Switch to another buffer and show it in another window. The buffer name is selected interactively by typing a substring. For details of keybindings, see `ido-switch-buffer'. \(fn)" t nil) (autoload 'ido-display-buffer "ido" "\ Display a buffer in another window but don't select it. The buffer name is selected interactively by typing a substring. For details of keybindings, see `ido-switch-buffer'. \(fn)" t nil) (autoload 'ido-kill-buffer "ido" "\ Kill a buffer. The buffer name is selected interactively by typing a substring. For details of keybindings, see `ido-switch-buffer'. \(fn)" t nil) (autoload 'ido-insert-buffer "ido" "\ Insert contents of a buffer in current buffer after point. The buffer name is selected interactively by typing a substring. For details of keybindings, see `ido-switch-buffer'. \(fn)" t nil) (autoload 'ido-switch-buffer-other-frame "ido" "\ Switch to another buffer and show it in another frame. The buffer name is selected interactively by typing a substring. For details of keybindings, see `ido-switch-buffer'. \(fn)" t nil) (autoload 'ido-find-file-in-dir "ido" "\ Switch to another file starting from DIR. \(fn DIR)" t nil) (autoload 'ido-find-file "ido" "\ Edit file with name obtained via minibuffer. The file is displayed according to `ido-default-file-method' -- the default is to show it in the same window, unless it is already visible in another frame. The file name is selected interactively by typing a substring. As you type in a string, all of the filenames matching the string are displayed if substring-matching is used (default). Look at `ido-enable-prefix' and `ido-toggle-prefix'. When you have found the filename you want, it can then be selected. As you type, most keys have their normal keybindings, except for the following: \\<ido-file-completion-map> RET Select the file at the front of the list of matches. If the list is empty, possibly prompt to create new file. \\[ido-select-text] Select the current prompt as the buffer or file. If no buffer or file is found, prompt for a new one. \\[ido-next-match] Put the first element at the end of the list. \\[ido-prev-match] Put the last element at the start of the list. \\[ido-complete] Complete a common suffix to the current string that matches all files. If there is only one match, select that file. If there is no common suffix, show a list of all matching files in a separate window. \\[ido-edit-input] Edit input string (including directory). \\[ido-prev-work-directory] or \\[ido-next-work-directory] go to previous/next directory in work directory history. \\[ido-merge-work-directories] search for file in the work directory history. \\[ido-forget-work-directory] removes current directory from the work directory history. \\[ido-prev-work-file] or \\[ido-next-work-file] cycle through the work file history. \\[ido-wide-find-file-or-pop-dir] and \\[ido-wide-find-dir-or-delete-dir] prompts and uses find to locate files or directories. \\[ido-make-directory] prompts for a directory to create in current directory. \\[ido-fallback-command] Fallback to non-ido version of current command. \\[ido-toggle-regexp] Toggle regexp searching. \\[ido-toggle-prefix] Toggle between substring and prefix matching. \\[ido-toggle-case] Toggle case-sensitive searching of file names. \\[ido-toggle-vc] Toggle version control for this file. \\[ido-toggle-literal] Toggle literal reading of this file. \\[ido-completion-help] Show list of matching files in separate window. \\[ido-toggle-ignore] Toggle ignoring files listed in `ido-ignore-files'. \(fn)" t nil) (autoload 'ido-find-file-other-window "ido" "\ Switch to another file and show it in another window. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-find-alternate-file "ido" "\ Switch to another file and show it in another window. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-find-file-read-only "ido" "\ Edit file read-only with name obtained via minibuffer. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-find-file-read-only-other-window "ido" "\ Edit file read-only in other window with name obtained via minibuffer. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-find-file-read-only-other-frame "ido" "\ Edit file read-only in other frame with name obtained via minibuffer. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-display-file "ido" "\ Display a file in another window but don't select it. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-find-file-other-frame "ido" "\ Switch to another file and show it in another frame. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-write-file "ido" "\ Write current buffer to a file. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-insert-file "ido" "\ Insert contents of file in current buffer. The file name is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-dired "ido" "\ Call `dired' the ido way. The directory is selected interactively by typing a substring. For details of keybindings, see `ido-find-file'. \(fn)" t nil) (autoload 'ido-read-buffer "ido" "\ Ido replacement for the built-in `read-buffer'. Return the name of a buffer selected. PROMPT is the prompt to give to the user. DEFAULT if given is the default buffer to be selected, which will go to the front of the list. If REQUIRE-MATCH is non-nil, an existing buffer must be selected. \(fn PROMPT &optional DEFAULT REQUIRE-MATCH)" nil nil) (autoload 'ido-read-file-name "ido" "\ Ido replacement for the built-in `read-file-name'. Read file name, prompting with PROMPT and completing in directory DIR. See `read-file-name' for additional parameters. \(fn PROMPT &optional DIR DEFAULT-FILENAME MUSTMATCH INITIAL PREDICATE)" nil nil) (autoload 'ido-read-directory-name "ido" "\ Ido replacement for the built-in `read-directory-name'. Read directory name, prompting with PROMPT and completing in directory DIR. See `read-directory-name' for additional parameters. \(fn PROMPT &optional DIR DEFAULT-DIRNAME MUSTMATCH INITIAL)" nil nil) (autoload 'ido-completing-read "ido" "\ Ido replacement for the built-in `completing-read'. Read a string in the minibuffer with ido-style completion. PROMPT is a string to prompt with; normally it ends in a colon and a space. CHOICES is a list of strings which are the possible completions. PREDICATE is currently ignored; it is included to be compatible with `completing-read'. If REQUIRE-MATCH is non-nil, the user is not allowed to exit unless the input is (or completes to) an element of CHOICES or is null. If the input is null, `ido-completing-read' returns DEF, or an empty string if DEF is nil, regardless of the value of REQUIRE-MATCH. If INITIAL-INPUT is non-nil, insert it in the minibuffer initially, with point positioned at the end. HIST, if non-nil, specifies a history list. DEF, if non-nil, is the default value. \(fn PROMPT CHOICES &optional PREDICATE REQUIRE-MATCH INITIAL-INPUT HIST DEF)" nil nil) ;;;*** ;;;### (autoloads (ielm) "ielm" "ielm.el" (19259 35421)) ;;; Generated autoloads from ielm.el (add-hook 'same-window-buffer-names (purecopy "*ielm*")) (autoload 'ielm "ielm" "\ Interactively evaluate Emacs Lisp expressions. Switches to the buffer `*ielm*', or creates it if it does not exist. \(fn)" t nil) ;;;*** ;;;### (autoloads (iimage-mode turn-on-iimage-mode) "iimage" "iimage.el" ;;;;;; (19259 35421)) ;;; Generated autoloads from iimage.el (autoload 'turn-on-iimage-mode "iimage" "\ Unconditionally turn on iimage mode. \(fn)" t nil) (autoload 'iimage-mode "iimage" "\ Toggle inline image minor mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (defimage find-image remove-images insert-sliced-image ;;;;;; insert-image put-image create-image image-type-auto-detected-p ;;;;;; image-type-available-p image-type image-type-from-file-name ;;;;;; image-type-from-file-header image-type-from-buffer image-type-from-data) ;;;;;; "image" "image.el" (19259 35421)) ;;; Generated autoloads from image.el (autoload 'image-type-from-data "image" "\ Determine the image type from image data DATA. Value is a symbol specifying the image type or nil if type cannot be determined. \(fn DATA)" nil nil) (autoload 'image-type-from-buffer "image" "\ Determine the image type from data in the current buffer. Value is a symbol specifying the image type or nil if type cannot be determined. \(fn)" nil nil) (autoload 'image-type-from-file-header "image" "\ Determine the type of image file FILE from its first few bytes. Value is a symbol specifying the image type, or nil if type cannot be determined. \(fn FILE)" nil nil) (autoload 'image-type-from-file-name "image" "\ Determine the type of image file FILE from its name. Value is a symbol specifying the image type, or nil if type cannot be determined. \(fn FILE)" nil nil) (autoload 'image-type "image" "\ Determine and return image type. SOURCE is an image file name or image data. Optional TYPE is a symbol describing the image type. If TYPE is omitted or nil, try to determine the image type from its first few bytes of image data. If that doesn't work, and SOURCE is a file name, use its file extension as image type. Optional DATA-P non-nil means SOURCE is a string containing image data. \(fn SOURCE &optional TYPE DATA-P)" nil nil) (autoload 'image-type-available-p "image" "\ Return non-nil if image type TYPE is available. Image types are symbols like `xbm' or `jpeg'. \(fn TYPE)" nil nil) (autoload 'image-type-auto-detected-p "image" "\ Return t if the current buffer contains an auto-detectable image. This function is intended to be used from `magic-fallback-mode-alist'. The buffer is considered to contain an auto-detectable image if its beginning matches an image type in `image-type-header-regexps', and that image type is present in `image-type-auto-detectable' with a non-nil value. If that value is non-nil, but not t, then the image type must be available. \(fn)" nil nil) (autoload 'create-image "image" "\ Create an image. FILE-OR-DATA is an image file name or image data. Optional TYPE is a symbol describing the image type. If TYPE is omitted or nil, try to determine the image type from its first few bytes of image data. If that doesn't work, and FILE-OR-DATA is a file name, use its file extension as image type. Optional DATA-P non-nil means FILE-OR-DATA is a string containing image data. Optional PROPS are additional image attributes to assign to the image, like, e.g. `:mask MASK'. Value is the image created, or nil if images of type TYPE are not supported. Images should not be larger than specified by `max-image-size'. Image file names that are not absolute are searched for in the \"images\" sub-directory of `data-directory' and `x-bitmap-file-path' (in that order). \(fn FILE-OR-DATA &optional TYPE DATA-P &rest PROPS)" nil nil) (autoload 'put-image "image" "\ Put image IMAGE in front of POS in the current buffer. IMAGE must be an image created with `create-image' or `defimage'. IMAGE is displayed by putting an overlay into the current buffer with a `before-string' STRING that has a `display' property whose value is the image. STRING is defaulted if you omit it. POS may be an integer or marker. AREA is where to display the image. AREA nil or omitted means display it in the text area, a value of `left-margin' means display it in the left marginal area, a value of `right-margin' means display it in the right marginal area. \(fn IMAGE POS &optional STRING AREA)" nil nil) (autoload 'insert-image "image" "\ Insert IMAGE into current buffer at point. IMAGE is displayed by inserting STRING into the current buffer with a `display' property whose value is the image. STRING is defaulted if you omit it. AREA is where to display the image. AREA nil or omitted means display it in the text area, a value of `left-margin' means display it in the left marginal area, a value of `right-margin' means display it in the right marginal area. SLICE specifies slice of IMAGE to insert. SLICE nil or omitted means insert whole image. SLICE is a list (X Y WIDTH HEIGHT) specifying the X and Y positions and WIDTH and HEIGHT of image area to insert. A float value 0.0 - 1.0 means relative to the width or height of the image; integer values are taken as pixel values. \(fn IMAGE &optional STRING AREA SLICE)" nil nil) (autoload 'insert-sliced-image "image" "\ Insert IMAGE into current buffer at point. IMAGE is displayed by inserting STRING into the current buffer with a `display' property whose value is the image. STRING is defaulted if you omit it. AREA is where to display the image. AREA nil or omitted means display it in the text area, a value of `left-margin' means display it in the left marginal area, a value of `right-margin' means display it in the right marginal area. The image is automatically split into ROWS x COLS slices. \(fn IMAGE &optional STRING AREA ROWS COLS)" nil nil) (autoload 'remove-images "image" "\ Remove images between START and END in BUFFER. Remove only images that were put in BUFFER with calls to `put-image'. BUFFER nil or omitted means use the current buffer. \(fn START END &optional BUFFER)" nil nil) (autoload 'find-image "image" "\ Find an image, choosing one of a list of image specifications. SPECS is a list of image specifications. Each image specification in SPECS is a property list. The contents of a specification are image type dependent. All specifications must at least contain the properties `:type TYPE' and either `:file FILE' or `:data DATA', where TYPE is a symbol specifying the image type, e.g. `xbm', FILE is the file to load the image from, and DATA is a string containing the actual image data. The specification whose TYPE is supported, and FILE exists, is used to construct the image specification to be returned. Return nil if no specification is satisfied. The image is looked for in `image-load-path'. Image files should not be larger than specified by `max-image-size'. \(fn SPECS)" nil nil) (autoload 'defimage "image" "\ Define SYMBOL as an image. SPECS is a list of image specifications. DOC is an optional documentation string. Each image specification in SPECS is a property list. The contents of a specification are image type dependent. All specifications must at least contain the properties `:type TYPE' and either `:file FILE' or `:data DATA', where TYPE is a symbol specifying the image type, e.g. `xbm', FILE is the file to load the image from, and DATA is a string containing the actual image data. The first image specification whose TYPE is supported, and FILE exists, is used to define SYMBOL. Example: (defimage test-image ((:type xpm :file \"~/test1.xpm\") (:type xbm :file \"~/test1.xbm\"))) \(fn SYMBOL SPECS &optional DOC)" nil (quote macro)) ;;;*** ;;;### (autoloads (image-dired-dired-edit-comment-and-tags image-dired-mark-tagged-files ;;;;;; image-dired-dired-comment-files image-dired-dired-display-image ;;;;;; image-dired-dired-display-external image-dired-display-thumb ;;;;;; image-dired-display-thumbs-append image-dired-setup-dired-keybindings ;;;;;; image-dired-jump-thumbnail-buffer image-dired-delete-tag ;;;;;; image-dired-tag-files image-dired-show-all-from-dir image-dired-display-thumbs ;;;;;; image-dired-dired-with-window-configuration image-dired-dired-insert-marked-thumbs) ;;;;;; "image-dired" "image-dired.el" (19259 35421)) ;;; Generated autoloads from image-dired.el (autoload 'image-dired-dired-insert-marked-thumbs "image-dired" "\ Insert thumbnails before file names of marked files in the dired buffer. \(fn)" t nil) (autoload 'image-dired-dired-with-window-configuration "image-dired" "\ Open directory DIR and create a default window configuration. Convenience command that: - Opens dired in folder DIR - Splits windows in most useful (?) way - Set `truncate-lines' to t After the command has finished, you would typically mark some image files in dired and type \\[image-dired-display-thumbs] (`image-dired-display-thumbs'). If called with prefix argument ARG, skip splitting of windows. The current window configuration is saved and can be restored by calling `image-dired-restore-window-configuration'. \(fn DIR &optional ARG)" t nil) (autoload 'image-dired-display-thumbs "image-dired" "\ Display thumbnails of all marked files, in `image-dired-thumbnail-buffer'. If a thumbnail image does not exist for a file, it is created on the fly. With prefix argument ARG, display only thumbnail for file at point (this is useful if you have marked some files but want to show another one). Recommended usage is to split the current frame horizontally so that you have the dired buffer in the left window and the `image-dired-thumbnail-buffer' buffer in the right window. With optional argument APPEND, append thumbnail to thumbnail buffer instead of erasing it first. Option argument DO-NOT-POP controls if `pop-to-buffer' should be used or not. If non-nil, use `display-buffer' instead of `pop-to-buffer'. This is used from functions like `image-dired-next-line-and-display' and `image-dired-previous-line-and-display' where we do not want the thumbnail buffer to be selected. \(fn &optional ARG APPEND DO-NOT-POP)" t nil) (autoload 'image-dired-show-all-from-dir "image-dired" "\ Make a preview buffer for all images in DIR and display it. If the number of files in DIR matching `image-file-name-regexp' exceeds `image-dired-show-all-from-dir-max-files', a warning will be displayed. \(fn DIR)" t nil) (defalias 'image-dired 'image-dired-show-all-from-dir) (defalias 'tumme 'image-dired-show-all-from-dir) (autoload 'image-dired-tag-files "image-dired" "\ Tag marked file(s) in dired. With prefix ARG, tag file at point. \(fn ARG)" t nil) (autoload 'image-dired-delete-tag "image-dired" "\ Remove tag for selected file(s). With prefix argument ARG, remove tag from file at point. \(fn ARG)" t nil) (autoload 'image-dired-jump-thumbnail-buffer "image-dired" "\ Jump to thumbnail buffer. \(fn)" t nil) (autoload 'image-dired-setup-dired-keybindings "image-dired" "\ Setup easy-to-use keybindings for the commands to be used in dired mode. Note that n, p and <down> and <up> will be hijacked and bound to `image-dired-dired-x-line'. \(fn)" t nil) (autoload 'image-dired-display-thumbs-append "image-dired" "\ Append thumbnails to `image-dired-thumbnail-buffer'. \(fn)" t nil) (autoload 'image-dired-display-thumb "image-dired" "\ Shorthand for `image-dired-display-thumbs' with prefix argument. \(fn)" t nil) (autoload 'image-dired-dired-display-external "image-dired" "\ Display file at point using an external viewer. \(fn)" t nil) (autoload 'image-dired-dired-display-image "image-dired" "\ Display current image file. See documentation for `image-dired-display-image' for more information. With prefix argument ARG, display image in its original size. \(fn &optional ARG)" t nil) (autoload 'image-dired-dired-comment-files "image-dired" "\ Add comment to current or marked files in dired. \(fn)" t nil) (autoload 'image-dired-mark-tagged-files "image-dired" "\ Use regexp to mark files with matching tag. A `tag' is a keyword, a piece of meta data, associated with an image file and stored in image-dired's database file. This command lets you input a regexp and this will be matched against all tags on all image files in the database file. The files that have a matching tag will be marked in the dired buffer. \(fn)" t nil) (autoload 'image-dired-dired-edit-comment-and-tags "image-dired" "\ Edit comment and tags of current or marked image files. Edit comment and tags for all marked image files in an easy-to-use form. \(fn)" t nil) ;;;*** ;;;### (autoloads (auto-image-file-mode insert-image-file image-file-name-regexp ;;;;;; image-file-name-regexps image-file-name-extensions) "image-file" ;;;;;; "image-file.el" (19259 35421)) ;;; Generated autoloads from image-file.el (defvar image-file-name-extensions (purecopy '("png" "jpeg" "jpg" "gif" "tiff" "tif" "xbm" "xpm" "pbm" "pgm" "ppm" "pnm" "svg")) "\ A list of image-file filename extensions. Filenames having one of these extensions are considered image files, in addition to those matching `image-file-name-regexps'. See `auto-image-file-mode'; if `auto-image-file-mode' is enabled, setting this variable directly does not take effect unless `auto-image-file-mode' is re-enabled; this happens automatically when the variable is set using \\[customize].") (custom-autoload 'image-file-name-extensions "image-file" nil) (defvar image-file-name-regexps nil "\ List of regexps matching image-file filenames. Filenames matching one of these regexps are considered image files, in addition to those with an extension in `image-file-name-extensions'. See function `auto-image-file-mode'; if `auto-image-file-mode' is enabled, setting this variable directly does not take effect unless `auto-image-file-mode' is re-enabled; this happens automatically when the variable is set using \\[customize].") (custom-autoload 'image-file-name-regexps "image-file" nil) (autoload 'image-file-name-regexp "image-file" "\ Return a regular expression matching image-file filenames. \(fn)" nil nil) (autoload 'insert-image-file "image-file" "\ Insert the image file FILE into the current buffer. Optional arguments VISIT, BEG, END, and REPLACE are interpreted as for the command `insert-file-contents'. \(fn FILE &optional VISIT BEG END REPLACE)" nil nil) (defvar auto-image-file-mode nil "\ Non-nil if Auto-Image-File mode is enabled. See the command `auto-image-file-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `auto-image-file-mode'.") (custom-autoload 'auto-image-file-mode "image-file" nil) (autoload 'auto-image-file-mode "image-file" "\ Toggle visiting of image files as images. With prefix argument ARG, turn on if positive, otherwise off. Returns non-nil if the new state is enabled. Image files are those whose name has an extension in `image-file-name-extensions', or matches a regexp in `image-file-name-regexps'. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (image-bookmark-jump image-mode-as-text image-minor-mode ;;;;;; image-mode) "image-mode" "image-mode.el" (19259 35421)) ;;; Generated autoloads from image-mode.el (push (cons (purecopy "\\.jpe?g\\'") 'image-mode) auto-mode-alist) (push (cons (purecopy "\\.png\\'") 'image-mode) auto-mode-alist) (push (cons (purecopy "\\.gif\\'") 'image-mode) auto-mode-alist) (push (cons (purecopy "\\.tiff?\\'") 'image-mode) auto-mode-alist) (push (cons (purecopy "\\.p[bpgn]m\\'") 'image-mode) auto-mode-alist) (push (cons (purecopy "\\.x[bp]m\\'") 'c-mode) auto-mode-alist) (push (cons (purecopy "\\.x[bp]m\\'") 'image-mode) auto-mode-alist) (push (cons (purecopy "\\.svgz?\\'") 'xml-mode) auto-mode-alist) (push (cons (purecopy "\\.svgz?\\'") 'image-mode) auto-mode-alist) (autoload 'image-mode "image-mode" "\ Major mode for image files. You can use \\<image-mode-map>\\[image-toggle-display] to toggle between display as an image and display as text. \(fn)" t nil) (autoload 'image-minor-mode "image-mode" "\ Toggle Image minor mode. With arg, turn Image minor mode on if arg is positive, off otherwise. It provides the key \\<image-mode-map>\\[image-toggle-display] to switch back to `image-mode' to display an image file as the actual image. \(fn &optional ARG)" t nil) (autoload 'image-mode-as-text "image-mode" "\ Set a non-image mode as major mode in combination with image minor mode. A non-image major mode found from `auto-mode-alist' or Fundamental mode displays an image file as text. `image-minor-mode' provides the key \\<image-mode-map>\\[image-toggle-display] to switch back to `image-mode' to display an image file as the actual image. You can use `image-mode-as-text' in `auto-mode-alist' when you want to display an image file as text inititally. See commands `image-mode' and `image-minor-mode' for more information on these modes. \(fn)" t nil) (autoload 'image-bookmark-jump "image-mode" "\ Not documented \(fn BMK)" nil nil) ;;;*** ;;;### (autoloads (imenu imenu-add-menubar-index imenu-add-to-menubar ;;;;;; imenu-sort-function) "imenu" "imenu.el" (19259 35421)) ;;; Generated autoloads from imenu.el (defvar imenu-sort-function nil "\ The function to use for sorting the index mouse-menu. Affects only the mouse index menu. Set this to nil if you don't want any sorting (faster). The items in the menu are then presented in the order they were found in the buffer. Set it to `imenu--sort-by-name' if you want alphabetic sorting. The function should take two arguments and return t if the first element should come before the second. The arguments are cons cells; \(NAME . POSITION). Look at `imenu--sort-by-name' for an example.") (custom-autoload 'imenu-sort-function "imenu" t) (defvar imenu-generic-expression nil "\ The regex pattern to use for creating a buffer index. If non-nil this pattern is passed to `imenu--generic-function' to create a buffer index. Look there for the documentation of this pattern's structure. For example, see the value of `fortran-imenu-generic-expression' used by `fortran-mode' with `imenu-syntax-alist' set locally to give the characters which normally have \"symbol\" syntax \"word\" syntax during matching.") (put 'imenu-generic-expression 'risky-local-variable t) (make-variable-buffer-local 'imenu-generic-expression) (defvar imenu-create-index-function 'imenu-default-create-index-function "\ The function to use for creating an index alist of the current buffer. It should be a function that takes no arguments and returns an index alist of the current buffer. The function is called within a `save-excursion'. See `imenu--index-alist' for the format of the buffer index alist.") (make-variable-buffer-local 'imenu-create-index-function) (defvar imenu-prev-index-position-function 'beginning-of-defun "\ Function for finding the next index position. If `imenu-create-index-function' is set to `imenu-default-create-index-function', then you must set this variable to a function that will find the next index, looking backwards in the file. The function should leave point at the place to be connected to the index and it should return nil when it doesn't find another index.") (make-variable-buffer-local 'imenu-prev-index-position-function) (defvar imenu-extract-index-name-function nil "\ Function for extracting the index item name, given a position. This function is called after `imenu-prev-index-position-function' finds a position for an index item, with point at that position. It should return the name for that index item.") (make-variable-buffer-local 'imenu-extract-index-name-function) (defvar imenu-name-lookup-function nil "\ Function to compare string with index item. This function will be called with two strings, and should return non-nil if they match. If nil, comparison is done with `string='. Set this to some other function for more advanced comparisons, such as \"begins with\" or \"name matches and number of arguments match\".") (make-variable-buffer-local 'imenu-name-lookup-function) (defvar imenu-default-goto-function 'imenu-default-goto-function "\ The default function called when selecting an Imenu item. The function in this variable is called when selecting a normal index-item.") (make-variable-buffer-local 'imenu-default-goto-function) (put 'imenu--index-alist 'risky-local-variable t) (make-variable-buffer-local 'imenu-syntax-alist) (make-variable-buffer-local 'imenu-case-fold-search) (autoload 'imenu-add-to-menubar "imenu" "\ Add an `imenu' entry to the menu bar for the current buffer. NAME is a string used to name the menu bar item. See the command `imenu' for more information. \(fn NAME)" t nil) (autoload 'imenu-add-menubar-index "imenu" "\ Add an Imenu \"Index\" entry on the menu bar for the current buffer. A trivial interface to `imenu-add-to-menubar' suitable for use in a hook. \(fn)" t nil) (autoload 'imenu "imenu" "\ Jump to a place in the buffer chosen using a buffer menu or mouse menu. INDEX-ITEM specifies the position. See `imenu-choose-buffer-index' for more information. \(fn INDEX-ITEM)" t nil) ;;;*** ;;;### (autoloads (indian-2-column-to-ucs-region in-is13194-pre-write-conversion ;;;;;; in-is13194-post-read-conversion indian-compose-string indian-compose-region) ;;;;;; "ind-util" "language/ind-util.el" (19259 35422)) ;;; Generated autoloads from language/ind-util.el (autoload 'indian-compose-region "ind-util" "\ Compose the region according to `composition-function-table'. \(fn FROM TO)" t nil) (autoload 'indian-compose-string "ind-util" "\ Not documented \(fn STRING)" nil nil) (autoload 'in-is13194-post-read-conversion "ind-util" "\ Not documented \(fn LEN)" nil nil) (autoload 'in-is13194-pre-write-conversion "ind-util" "\ Not documented \(fn FROM TO)" nil nil) (autoload 'indian-2-column-to-ucs-region "ind-util" "\ Convert old Emacs Devanagari characters to UCS. \(fn FROM TO)" t nil) ;;;*** ;;;### (autoloads (inferior-lisp inferior-lisp-prompt inferior-lisp-load-command ;;;;;; inferior-lisp-program inferior-lisp-filter-regexp) "inf-lisp" ;;;;;; "progmodes/inf-lisp.el" (19259 35422)) ;;; Generated autoloads from progmodes/inf-lisp.el (defvar inferior-lisp-filter-regexp (purecopy "\\`\\s *\\(:\\(\\w\\|\\s_\\)\\)?\\s *\\'") "\ *What not to save on inferior Lisp's input history. Input matching this regexp is not saved on the input history in Inferior Lisp mode. Default is whitespace followed by 0 or 1 single-letter colon-keyword \(as in :a, :c, etc.)") (custom-autoload 'inferior-lisp-filter-regexp "inf-lisp" t) (defvar inferior-lisp-program (purecopy "lisp") "\ *Program name for invoking an inferior Lisp in Inferior Lisp mode.") (custom-autoload 'inferior-lisp-program "inf-lisp" t) (defvar inferior-lisp-load-command (purecopy "(load \"%s\")\n") "\ *Format-string for building a Lisp expression to load a file. This format string should use `%s' to substitute a file name and should result in a Lisp expression that will command the inferior Lisp to load that file. The default works acceptably on most Lisps. The string \"(progn (load \\\"%s\\\" :verbose nil :print t) (values))\\n\" produces cosmetically superior output for this application, but it works only in Common Lisp.") (custom-autoload 'inferior-lisp-load-command "inf-lisp" t) (defvar inferior-lisp-prompt (purecopy "^[^> \n]*>+:? *") "\ Regexp to recognize prompts in the Inferior Lisp mode. Defaults to \"^[^> \\n]*>+:? *\", which works pretty good for Lucid, kcl, and franz. This variable is used to initialize `comint-prompt-regexp' in the Inferior Lisp buffer. This variable is only used if the variable `comint-use-prompt-regexp' is non-nil. More precise choices: Lucid Common Lisp: \"^\\\\(>\\\\|\\\\(->\\\\)+\\\\) *\" franz: \"^\\\\(->\\\\|<[0-9]*>:\\\\) *\" kcl: \"^>+ *\" This is a fine thing to set in your .emacs file or through Custom.") (custom-autoload 'inferior-lisp-prompt "inf-lisp" t) (defvar inferior-lisp-mode-hook 'nil "\ *Hook for customizing Inferior Lisp mode.") (autoload 'inferior-lisp "inf-lisp" "\ Run an inferior Lisp process, input and output via buffer `*inferior-lisp*'. If there is a process already running in `*inferior-lisp*', just switch to that buffer. With argument, allows you to edit the command line (default is value of `inferior-lisp-program'). Runs the hooks from `inferior-lisp-mode-hook' (after the `comint-mode-hook' is run). \(Type \\[describe-mode] in the process buffer for a list of commands.) \(fn CMD)" t nil) (add-hook 'same-window-buffer-names (purecopy "*inferior-lisp*")) (defalias 'run-lisp 'inferior-lisp) ;;;*** ;;;### (autoloads (Info-bookmark-jump Info-speedbar-browser Info-goto-emacs-key-command-node ;;;;;; Info-goto-emacs-command-node Info-mode info-finder info-apropos ;;;;;; Info-index Info-directory Info-on-current-buffer info-standalone ;;;;;; info-emacs-manual info info-other-window) "info" "info.el" ;;;;;; (19259 35422)) ;;; Generated autoloads from info.el (autoload 'info-other-window "info" "\ Like `info' but show the Info buffer in another window. \(fn &optional FILE-OR-NODE)" t nil) (add-hook 'same-window-regexps (purecopy "\\*info\\*\\(\\|<[0-9]+>\\)")) (put 'info 'info-file (purecopy "emacs")) (autoload 'info "info" "\ Enter Info, the documentation browser. Optional argument FILE-OR-NODE specifies the file to examine; the default is the top-level directory of Info. Called from a program, FILE-OR-NODE may specify an Info node of the form `(FILENAME)NODENAME'. Optional argument BUFFER specifies the Info buffer name; the default buffer name is *info*. If BUFFER exists, just switch to BUFFER. Otherwise, create a new buffer with the top-level Info directory. In interactive use, a non-numeric prefix argument directs this command to read a file name from the minibuffer. A numeric prefix argument selects an Info buffer with the prefix number appended to the Info buffer name. The search path for Info files is in the variable `Info-directory-list'. The top-level Info directory is made by combining all the files named `dir' in all the directories in that path. See a list of available Info commands in `Info-mode'. \(fn &optional FILE-OR-NODE BUFFER)" t nil) (autoload 'info-emacs-manual "info" "\ Display the Emacs manual in Info mode. \(fn)" t nil) (autoload 'info-standalone "info" "\ Run Emacs as a standalone Info reader. Usage: emacs -f info-standalone [filename] In standalone mode, \\<Info-mode-map>\\[Info-exit] exits Emacs itself. \(fn)" nil nil) (autoload 'Info-on-current-buffer "info" "\ Use Info mode to browse the current Info buffer. With a prefix arg, this queries for the node name to visit first; otherwise, that defaults to `Top'. \(fn &optional NODENAME)" t nil) (autoload 'Info-directory "info" "\ Go to the Info directory node. \(fn)" t nil) (autoload 'Info-index "info" "\ Look up a string TOPIC in the index for this manual and go to that entry. If there are no exact matches to the specified topic, this chooses the first match which is a case-insensitive substring of a topic. Use the \\<Info-mode-map>\\[Info-index-next] command to see the other matches. Give an empty topic name to go to the Index node itself. \(fn TOPIC)" t nil) (autoload 'info-apropos "info" "\ Grovel indices of all known Info files on your system for STRING. Build a menu of the possible matches. \(fn STRING)" t nil) (autoload 'info-finder "info" "\ Display descriptions of the keywords in the Finder virtual manual. \(fn)" t nil) (autoload 'Info-mode "info" "\ Info mode provides commands for browsing through the Info documentation tree. Documentation in Info is divided into \"nodes\", each of which discusses one topic and contains references to other nodes which discuss related topics. Info has commands to follow the references and show you other nodes. \\<Info-mode-map>\\[Info-help] Invoke the Info tutorial. \\[Info-exit] Quit Info: reselect previously selected buffer. Selecting other nodes: \\[Info-mouse-follow-nearest-node] Follow a node reference you click on. This works with menu items, cross references, and the \"next\", \"previous\" and \"up\", depending on where you click. \\[Info-follow-nearest-node] Follow a node reference near point, like \\[Info-mouse-follow-nearest-node]. \\[Info-next] Move to the \"next\" node of this node. \\[Info-prev] Move to the \"previous\" node of this node. \\[Info-up] Move \"up\" from this node. \\[Info-menu] Pick menu item specified by name (or abbreviation). Picking a menu item causes another node to be selected. \\[Info-directory] Go to the Info directory node. \\[Info-top-node] Go to the Top node of this file. \\[Info-final-node] Go to the final node in this file. \\[Info-backward-node] Go backward one node, considering all nodes as forming one sequence. \\[Info-forward-node] Go forward one node, considering all nodes as forming one sequence. \\[Info-next-reference] Move cursor to next cross-reference or menu item. \\[Info-prev-reference] Move cursor to previous cross-reference or menu item. \\[Info-follow-reference] Follow a cross reference. Reads name of reference. \\[Info-history-back] Move back in history to the last node you were at. \\[Info-history-forward] Move forward in history to the node you returned from after using \\[Info-history-back]. \\[Info-history] Go to menu of visited nodes. \\[Info-toc] Go to table of contents of the current Info file. Moving within a node: \\[Info-scroll-up] Normally, scroll forward a full screen. Once you scroll far enough in a node that its menu appears on the screen but after point, the next scroll moves into its first subnode. When after all menu items (or if there is no menu), move up to the parent node. \\[Info-scroll-down] Normally, scroll backward. If the beginning of the buffer is already visible, try to go to the previous menu entry, or up if there is none. \\[beginning-of-buffer] Go to beginning of node. Advanced commands: \\[Info-search] Search through this Info file for specified regexp, and select the node in which the next occurrence is found. \\[Info-search-case-sensitively] Search through this Info file for specified regexp case-sensitively. \\[isearch-forward], \\[isearch-forward-regexp] Use Isearch to search through multiple Info nodes. \\[Info-index] Search for a topic in this manual's Index and go to index entry. \\[Info-index-next] (comma) Move to the next match from a previous \\<Info-mode-map>\\[Info-index] command. \\[Info-virtual-index] Look for a string and display the index node with results. \\[info-apropos] Look for a string in the indices of all manuals. \\[Info-goto-node] Move to node specified by name. You may include a filename as well, as (FILENAME)NODENAME. 1 .. 9 Pick first ... ninth item in node's menu. Every third `*' is highlighted to help pick the right number. \\[Info-copy-current-node-name] Put name of current Info node in the kill ring. \\[clone-buffer] Select a new cloned Info buffer in another window. \\[universal-argument] \\[info] Move to new Info file with completion. \\[universal-argument] N \\[info] Select Info buffer with prefix number in the name *info*<N>. \(fn)" nil nil) (put 'Info-goto-emacs-command-node 'info-file (purecopy "emacs")) (autoload 'Info-goto-emacs-command-node "info" "\ Go to the Info node in the Emacs manual for command COMMAND. The command is found by looking up in Emacs manual's indices or in another manual found via COMMAND's `info-file' property or the variable `Info-file-list-for-emacs'. COMMAND must be a symbol or string. \(fn COMMAND)" t nil) (put 'Info-goto-emacs-key-command-node 'info-file (purecopy "emacs")) (autoload 'Info-goto-emacs-key-command-node "info" "\ Go to the node in the Emacs manual which describes the command bound to KEY. KEY is a string. Interactively, if the binding is `execute-extended-command', a command is read. The command is found by looking up in Emacs manual's indices or in another manual found via COMMAND's `info-file' property or the variable `Info-file-list-for-emacs'. \(fn KEY)" t nil) (autoload 'Info-speedbar-browser "info" "\ Initialize speedbar to display an Info node browser. This will add a speedbar major display mode. \(fn)" t nil) (autoload 'Info-bookmark-jump "info" "\ This implements the `handler' function interface for the record type returned by `Info-bookmark-make-record', which see. \(fn BMK)" nil nil) ;;;*** ;;;### (autoloads (info-complete-file info-complete-symbol info-lookup-file ;;;;;; info-lookup-symbol info-lookup-reset) "info-look" "info-look.el" ;;;;;; (19259 35422)) ;;; Generated autoloads from info-look.el (autoload 'info-lookup-reset "info-look" "\ Throw away all cached data. This command is useful if the user wants to start at the beginning without quitting Emacs, for example, after some Info documents were updated on the system. \(fn)" t nil) (put 'info-lookup-symbol 'info-file "emacs") (autoload 'info-lookup-symbol "info-look" "\ Display the definition of SYMBOL, as found in the relevant manual. When this command is called interactively, it reads SYMBOL from the minibuffer. In the minibuffer, use M-n to yank the default argument value into the minibuffer so you can edit it. The default symbol is the one found at point. With prefix arg a query for the symbol help mode is offered. \(fn SYMBOL &optional MODE)" t nil) (put 'info-lookup-file 'info-file "emacs") (autoload 'info-lookup-file "info-look" "\ Display the documentation of a file. When this command is called interactively, it reads FILE from the minibuffer. In the minibuffer, use M-n to yank the default file name into the minibuffer so you can edit it. The default file name is the one found at point. With prefix arg a query for the file help mode is offered. \(fn FILE &optional MODE)" t nil) (autoload 'info-complete-symbol "info-look" "\ Perform completion on symbol preceding point. \(fn &optional MODE)" t nil) (autoload 'info-complete-file "info-look" "\ Perform completion on file preceding point. \(fn &optional MODE)" t nil) ;;;*** ;;;### (autoloads (info-xref-check-all-custom info-xref-check-all ;;;;;; info-xref-check) "info-xref" "info-xref.el" (19259 35422)) ;;; Generated autoloads from info-xref.el (autoload 'info-xref-check "info-xref" "\ Check external references in FILENAME, an info document. \(fn FILENAME)" t nil) (autoload 'info-xref-check-all "info-xref" "\ Check external references in all info documents in the usual path. The usual path is `Info-directory-list' and `Info-additional-directory-list'. \(fn)" t nil) (autoload 'info-xref-check-all-custom "info-xref" "\ Check info references in all customize groups and variables. `custom-manual' and `info-link' entries in the `custom-links' list are checked. `custom-load' autoloads for all symbols are loaded in order to get all the link information. This will be a lot of lisp packages loaded, and can take quite a while. \(fn)" t nil) ;;;*** ;;;### (autoloads (batch-info-validate Info-validate Info-split Info-split-threshold ;;;;;; Info-tagify) "informat" "informat.el" (19259 35422)) ;;; Generated autoloads from informat.el (autoload 'Info-tagify "informat" "\ Create or update Info file tag table in current buffer or in a region. \(fn &optional INPUT-BUFFER-NAME)" t nil) (defvar Info-split-threshold 262144 "\ The number of characters by which `Info-split' splits an info file.") (custom-autoload 'Info-split-threshold "informat" t) (autoload 'Info-split "informat" "\ Split an info file into an indirect file plus bounded-size subfiles. Each subfile will be up to the number of characters that `Info-split-threshold' specifies, plus one node. To use this command, first visit a large Info file that has a tag table. The buffer is modified into a (small) indirect info file which should be saved in place of the original visited file. The subfiles are written in the same directory the original file is in, with names generated by appending `-' and a number to the original file name. The indirect file still functions as an Info file, but it contains just the tag table and a directory of subfiles. \(fn)" t nil) (autoload 'Info-validate "informat" "\ Check current buffer for validity as an Info file. Check that every node pointer points to an existing node. \(fn)" t nil) (autoload 'batch-info-validate "informat" "\ Runs `Info-validate' on the files remaining on the command line. Must be used only with -batch, and kills Emacs on completion. Each file will be processed even if an error occurred previously. For example, invoke \"emacs -batch -f batch-info-validate $info/ ~/*.info\" \(fn)" nil nil) ;;;*** ;;;### (autoloads (isearch-process-search-multibyte-characters isearch-toggle-input-method ;;;;;; isearch-toggle-specified-input-method) "isearch-x" "international/isearch-x.el" ;;;;;; (19259 35422)) ;;; Generated autoloads from international/isearch-x.el (autoload 'isearch-toggle-specified-input-method "isearch-x" "\ Select an input method and turn it on in interactive search. \(fn)" t nil) (autoload 'isearch-toggle-input-method "isearch-x" "\ Toggle input method in interactive search. \(fn)" t nil) (autoload 'isearch-process-search-multibyte-characters "isearch-x" "\ Not documented \(fn LAST-CHAR)" nil nil) ;;;*** ;;;### (autoloads (isearchb-activate) "isearchb" "isearchb.el" (19259 ;;;;;; 35422)) ;;; Generated autoloads from isearchb.el (autoload 'isearchb-activate "isearchb" "\ Active isearchb mode for subsequent alphanumeric keystrokes. Executing this command again will terminate the search; or, if the search has not yet begun, will toggle to the last buffer accessed via isearchb. \(fn)" t nil) ;;;*** ;;;### (autoloads (iso-cvt-define-menu iso-cvt-write-only iso-cvt-read-only ;;;;;; iso-sgml2iso iso-iso2sgml iso-iso2duden iso-iso2gtex iso-gtex2iso ;;;;;; iso-tex2iso iso-iso2tex iso-german iso-spanish) "iso-cvt" ;;;;;; "international/iso-cvt.el" (19259 35422)) ;;; Generated autoloads from international/iso-cvt.el (autoload 'iso-spanish "iso-cvt" "\ Translate net conventions for Spanish to ISO 8859-1. Translate the region between FROM and TO using the table `iso-spanish-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-german "iso-cvt" "\ Translate net conventions for German to ISO 8859-1. Translate the region FROM and TO using the table `iso-german-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-iso2tex "iso-cvt" "\ Translate ISO 8859-1 characters to TeX sequences. Translate the region between FROM and TO using the table `iso-iso2tex-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-tex2iso "iso-cvt" "\ Translate TeX sequences to ISO 8859-1 characters. Translate the region between FROM and TO using the table `iso-tex2iso-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-gtex2iso "iso-cvt" "\ Translate German TeX sequences to ISO 8859-1 characters. Translate the region between FROM and TO using the table `iso-gtex2iso-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-iso2gtex "iso-cvt" "\ Translate ISO 8859-1 characters to German TeX sequences. Translate the region between FROM and TO using the table `iso-iso2gtex-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-iso2duden "iso-cvt" "\ Translate ISO 8859-1 characters to Duden sequences. Translate the region between FROM and TO using the table `iso-iso2duden-trans-tab'. Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-iso2sgml "iso-cvt" "\ Translate ISO 8859-1 characters in the region to SGML entities. Use entities from \"ISO 8879:1986//ENTITIES Added Latin 1//EN\". Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-sgml2iso "iso-cvt" "\ Translate SGML entities in the region to ISO 8859-1 characters. Use entities from \"ISO 8879:1986//ENTITIES Added Latin 1//EN\". Optional arg BUFFER is ignored (for use in `format-alist'). \(fn FROM TO &optional BUFFER)" t nil) (autoload 'iso-cvt-read-only "iso-cvt" "\ Warn that format is read-only. \(fn &rest IGNORE)" t nil) (autoload 'iso-cvt-write-only "iso-cvt" "\ Warn that format is write-only. \(fn &rest IGNORE)" t nil) (autoload 'iso-cvt-define-menu "iso-cvt" "\ Add submenus to the File menu, to convert to and from various formats. \(fn)" t nil) ;;;*** ;;;### (autoloads nil "iso-transl" "international/iso-transl.el" ;;;;;; (19259 35422)) ;;; Generated autoloads from international/iso-transl.el (or key-translation-map (setq key-translation-map (make-sparse-keymap))) (define-key key-translation-map "\C-x8" 'iso-transl-ctl-x-8-map) (autoload 'iso-transl-ctl-x-8-map "iso-transl" "Keymap for C-x 8 prefix." t 'keymap) ;;;*** ;;;### (autoloads (ispell-message ispell-minor-mode ispell ispell-complete-word-interior-frag ;;;;;; ispell-complete-word ispell-continue ispell-buffer ispell-comments-and-strings ;;;;;; ispell-region ispell-change-dictionary ispell-kill-ispell ;;;;;; ispell-help ispell-pdict-save ispell-word ispell-personal-dictionary) ;;;;;; "ispell" "textmodes/ispell.el" (19259 35422)) ;;; Generated autoloads from textmodes/ispell.el (put 'ispell-check-comments 'safe-local-variable (lambda (a) (memq a '(nil t exclusive)))) (defvar ispell-personal-dictionary nil "\ *File name of your personal spelling dictionary, or nil. If nil, the default personal dictionary, (\"~/.ispell_DICTNAME\" for ispell or \"~/.aspell.LANG.pws\" for aspell) is used, where DICTNAME is the name of your default dictionary and LANG the two letter language code.") (custom-autoload 'ispell-personal-dictionary "ispell" t) (put 'ispell-local-dictionary 'safe-local-variable 'string-or-null-p) (defvar ispell-menu-map nil "\ Key map for ispell menu.") (defvar ispell-menu-xemacs nil "\ Spelling menu for XEmacs. If nil when package is loaded, a standard menu will be set, and added as a submenu of the \"Edit\" menu.") (defvar ispell-menu-map-needed (and (not ispell-menu-map) (not (featurep 'xemacs)) 'reload)) (if ispell-menu-map-needed (progn (setq ispell-menu-map (make-sparse-keymap "Spell")) (define-key ispell-menu-map [ispell-change-dictionary] `(menu-item ,(purecopy "Change Dictionary...") ispell-change-dictionary :help ,(purecopy "Supply explicit dictionary file name"))) (define-key ispell-menu-map [ispell-kill-ispell] `(menu-item ,(purecopy "Kill Process") ispell-kill-ispell :enable (and (boundp 'ispell-process) ispell-process (eq (ispell-process-status) 'run)) :help ,(purecopy "Terminate Ispell subprocess"))) (define-key ispell-menu-map [ispell-pdict-save] `(menu-item ,(purecopy "Save Dictionary") (lambda nil (interactive) (ispell-pdict-save t t)) :help ,(purecopy "Save personal dictionary"))) (define-key ispell-menu-map [ispell-customize] `(menu-item ,(purecopy "Customize...") (lambda nil (interactive) (customize-group 'ispell)) :help ,(purecopy "Customize spell checking options"))) (define-key ispell-menu-map [ispell-help] `(menu-item ,(purecopy "Help") (lambda nil (interactive) (describe-function 'ispell-help)) :help ,(purecopy "Show standard Ispell keybindings and commands"))) (define-key ispell-menu-map [flyspell-mode] `(menu-item ,(purecopy "Automatic spell checking (Flyspell)") flyspell-mode :help ,(purecopy "Check spelling while you edit the text") :button (:toggle bound-and-true-p flyspell-mode))) (define-key ispell-menu-map [ispell-complete-word] `(menu-item ,(purecopy "Complete Word") ispell-complete-word :help ,(purecopy "Complete word at cursor using dictionary"))) (define-key ispell-menu-map [ispell-complete-word-interior-frag] `(menu-item ,(purecopy "Complete Word Fragment") ispell-complete-word-interior-frag :help ,(purecopy "Complete word fragment at cursor"))))) (if ispell-menu-map-needed (progn (define-key ispell-menu-map [ispell-continue] `(menu-item ,(purecopy "Continue Spell-Checking") ispell-continue :enable (and (boundp 'ispell-region-end) (marker-position ispell-region-end) (equal (marker-buffer ispell-region-end) (current-buffer))) :help ,(purecopy "Continue spell checking last region"))) (define-key ispell-menu-map [ispell-word] `(menu-item ,(purecopy "Spell-Check Word") ispell-word :help ,(purecopy "Spell-check word at cursor"))) (define-key ispell-menu-map [ispell-comments-and-strings] `(menu-item ,(purecopy "Spell-Check Comments") ispell-comments-and-strings :help ,(purecopy "Spell-check only comments and strings"))))) (if ispell-menu-map-needed (progn (define-key ispell-menu-map [ispell-region] `(menu-item ,(purecopy "Spell-Check Region") ispell-region :enable mark-active :help ,(purecopy "Spell-check text in marked region"))) (define-key ispell-menu-map [ispell-message] `(menu-item ,(purecopy "Spell-Check Message") ispell-message :visible (eq major-mode 'mail-mode) :help ,(purecopy "Skip headers and included message text"))) (define-key ispell-menu-map [ispell-buffer] `(menu-item ,(purecopy "Spell-Check Buffer") ispell-buffer :help ,(purecopy "Check spelling of selected buffer"))) (fset 'ispell-menu-map (symbol-value 'ispell-menu-map)))) (defvar ispell-skip-region-alist `((ispell-words-keyword forward-line) (ispell-dictionary-keyword forward-line) (ispell-pdict-keyword forward-line) (ispell-parsing-keyword forward-line) (,(purecopy "^---*BEGIN PGP [A-Z ]*--*") \, (purecopy "^---*END PGP [A-Z ]*--*")) (,(purecopy "^begin [0-9][0-9][0-9] [^ ]+$") \, (purecopy "\nend\n")) (,(purecopy "^%!PS-Adobe-[123].0") \, (purecopy "\n%%EOF\n")) (,(purecopy "^---* \\(Start of \\)?[Ff]orwarded [Mm]essage") \, (purecopy "^---* End of [Ff]orwarded [Mm]essage")) (,(purecopy "\\(--+\\|_+\\|\\(/\\w\\|\\(\\(\\w\\|[-_]\\)+[.:@]\\)\\)\\(\\w\\|[-_]\\)*\\([.:/@]+\\(\\w\\|[-_~=?&]\\)+\\)+\\)"))) "\ Alist expressing beginning and end of regions not to spell check. The alist key must be a regular expression. Valid forms include: (KEY) - just skip the key. (KEY . REGEXP) - skip to the end of REGEXP. REGEXP may be string or symbol. (KEY REGEXP) - skip to end of REGEXP. REGEXP must be a string. (KEY FUNCTION ARGS) - FUNCTION called with ARGS returns end of region.") (defvar ispell-tex-skip-alists (purecopy '((("\\\\addcontentsline" ispell-tex-arg-end 2) ("\\\\add\\(tocontents\\|vspace\\)" ispell-tex-arg-end) ("\\\\\\([aA]lph\\|arabic\\)" ispell-tex-arg-end) ("\\\\bibliographystyle" ispell-tex-arg-end) ("\\\\makebox" ispell-tex-arg-end 0) ("\\\\e?psfig" ispell-tex-arg-end) ("\\\\document\\(class\\|style\\)" . "\\\\begin[ \n]*{[ \n]*document[ \n]*}")) (("\\(figure\\|table\\)\\*?" ispell-tex-arg-end 0) ("list" ispell-tex-arg-end 2) ("program" . "\\\\end[ \n]*{[ \n]*program[ \n]*}") ("verbatim\\*?" . "\\\\end[ \n]*{[ \n]*verbatim\\*?[ \n]*}")))) "\ *Lists of regions to be skipped in TeX mode. First list is used raw. Second list has key placed inside \\begin{}. Delete or add any regions you want to be automatically selected for skipping in latex mode.") (defconst ispell-html-skip-alists '(("<[cC][oO][dD][eE]\\>[^>]*>" "</[cC][oO][dD][eE]*>") ("<[sS][cC][rR][iI][pP][tT]\\>[^>]*>" "</[sS][cC][rR][iI][pP][tT]>") ("<[aA][pP][pP][lL][eE][tT]\\>[^>]*>" "</[aA][pP][pP][lL][eE][tT]>") ("<[vV][eE][rR][bB]\\>[^>]*>" "<[vV][eE][rR][bB]\\>[^>]*>") ("<[tT][tT]/" "/") ("<[^ \n>]" ">") ("&[^ \n;]" "[; \n]")) "\ *Lists of start and end keys to skip in HTML buffers. Same format as `ispell-skip-region-alist'. Note - substrings of other matches must come last (e.g. \"<[tT][tT]/\" and \"<[^ \\t\\n>]\").") (put 'ispell-local-pdict 'safe-local-variable 'stringp) (define-key esc-map "$" 'ispell-word) (autoload 'ispell-word "ispell" "\ Check spelling of word under or before the cursor. If the word is not found in dictionary, display possible corrections in a window allowing you to choose one. If optional argument FOLLOWING is non-nil or if `ispell-following-word' is non-nil when called interactively, then the following word \(rather than preceding) is checked when the cursor is not over a word. When the optional argument QUIETLY is non-nil or `ispell-quietly' is non-nil when called interactively, non-corrective messages are suppressed. With a prefix argument (or if CONTINUE is non-nil), resume interrupted spell-checking of a buffer or region. Interactively, in Transient Mark mode when the mark is active, call `ispell-region' to check the active region for spelling errors. Word syntax is controlled by the definition of the chosen dictionary, which is in `ispell-local-dictionary-alist' or `ispell-dictionary-alist'. This will check or reload the dictionary. Use \\[ispell-change-dictionary] or \\[ispell-region] to update the Ispell process. Return values: nil word is correct or spelling is accepted. 0 word is inserted into buffer-local definitions. \"word\" word corrected from word list. \(\"word\" arg) word is hand entered. quit spell session exited. \(fn &optional FOLLOWING QUIETLY CONTINUE REGION)" t nil) (autoload 'ispell-pdict-save "ispell" "\ Check to see if the personal dictionary has been modified. If so, ask if it needs to be saved. \(fn &optional NO-QUERY FORCE-SAVE)" t nil) (autoload 'ispell-help "ispell" "\ Display a list of the options available when a misspelling is encountered. Selections are: DIGIT: Replace the word with a digit offered in the *Choices* buffer. SPC: Accept word this time. `i': Accept word and insert into private dictionary. `a': Accept word for this session. `A': Accept word and place in `buffer-local dictionary'. `r': Replace word with typed-in value. Rechecked. `R': Replace word with typed-in value. Query-replaced in buffer. Rechecked. `?': Show these commands. `x': Exit spelling buffer. Move cursor to original point. `X': Exit spelling buffer. Leaves cursor at the current point, and permits the aborted check to be completed later. `q': Quit spelling session (Kills ispell process). `l': Look up typed-in replacement in alternate dictionary. Wildcards okay. `u': Like `i', but the word is lower-cased first. `m': Place typed-in value in personal dictionary, then recheck current word. `C-l': Redraw screen. `C-r': Recursive edit. `C-z': Suspend Emacs or iconify frame. \(fn)" nil nil) (autoload 'ispell-kill-ispell "ispell" "\ Kill current Ispell process (so that you may start a fresh one). With NO-ERROR, just return non-nil if there was no Ispell running. \(fn &optional NO-ERROR)" t nil) (autoload 'ispell-change-dictionary "ispell" "\ Change to dictionary DICT for Ispell. With a prefix arg, set it \"globally\", for all buffers. Without a prefix arg, set it \"locally\", just for this buffer. By just answering RET you can find out what the current dictionary is. \(fn DICT &optional ARG)" t nil) (autoload 'ispell-region "ispell" "\ Interactively check a region for spelling errors. Return nil if spell session is quit, otherwise returns shift offset amount for last line processed. \(fn REG-START REG-END &optional RECHECKP SHIFT)" t nil) (autoload 'ispell-comments-and-strings "ispell" "\ Check comments and strings in the current buffer for spelling errors. \(fn)" t nil) (autoload 'ispell-buffer "ispell" "\ Check the current buffer for spelling errors interactively. \(fn)" t nil) (autoload 'ispell-continue "ispell" "\ Continue a halted spelling session beginning with the current word. \(fn)" t nil) (autoload 'ispell-complete-word "ispell" "\ Try to complete the word before or under point (see `lookup-words'). If optional INTERIOR-FRAG is non-nil then the word may be a character sequence inside of a word. Standard ispell choices are then available. \(fn &optional INTERIOR-FRAG)" t nil) (autoload 'ispell-complete-word-interior-frag "ispell" "\ Completes word matching character sequence inside a word. \(fn)" t nil) (autoload 'ispell "ispell" "\ Interactively check a region or buffer for spelling errors. If `transient-mark-mode' is on, and a region is active, spell-check that region. Otherwise spell-check the buffer. Ispell dictionaries are not distributed with Emacs. If you are looking for a dictionary, please see the distribution of the GNU ispell program, or do an Internet search; there are various dictionaries available on the net. \(fn)" t nil) (autoload 'ispell-minor-mode "ispell" "\ Toggle Ispell minor mode. With prefix argument ARG, turn Ispell minor mode on if ARG is positive, otherwise turn it off. In Ispell minor mode, pressing SPC or RET warns you if the previous word is incorrectly spelled. All the buffer-local variables and dictionaries are ignored -- to read them into the running ispell process, type \\[ispell-word] SPC. \(fn &optional ARG)" t nil) (autoload 'ispell-message "ispell" "\ Check the spelling of a mail message or news post. Don't check spelling of message headers except the Subject field. Don't check included messages. To abort spell checking of a message region and send the message anyway, use the `x' command. (Any subsequent regions will be checked.) The `X' command aborts the message send so that you can edit the buffer. To spell-check whenever a message is sent, include the appropriate lines in your .emacs file: (add-hook 'message-send-hook 'ispell-message) ;; GNUS 5 (add-hook 'news-inews-hook 'ispell-message) ;; GNUS 4 (add-hook 'mail-send-hook 'ispell-message) (add-hook 'mh-before-send-letter-hook 'ispell-message) You can bind this to the key C-c i in GNUS or mail by adding to `news-reply-mode-hook' or `mail-mode-hook' the following lambda expression: (function (lambda () (local-set-key \"\\C-ci\" 'ispell-message))) \(fn)" t nil) ;;;*** ;;;### (autoloads (iswitchb-mode) "iswitchb" "iswitchb.el" (19259 ;;;;;; 35422)) ;;; Generated autoloads from iswitchb.el (defvar iswitchb-mode nil "\ Non-nil if Iswitchb mode is enabled. See the command `iswitchb-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `iswitchb-mode'.") (custom-autoload 'iswitchb-mode "iswitchb" nil) (autoload 'iswitchb-mode "iswitchb" "\ Toggle Iswitchb global minor mode. With arg, turn Iswitchb mode on if ARG is positive, otherwise turn it off. This mode enables switching between buffers using substrings. See `iswitchb' for details. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (read-hiragana-string japanese-zenkaku-region japanese-hankaku-region ;;;;;; japanese-hiragana-region japanese-katakana-region japanese-zenkaku ;;;;;; japanese-hankaku japanese-hiragana japanese-katakana setup-japanese-environment-internal) ;;;;;; "japan-util" "language/japan-util.el" (19259 35422)) ;;; Generated autoloads from language/japan-util.el (autoload 'setup-japanese-environment-internal "japan-util" "\ Not documented \(fn)" nil nil) (autoload 'japanese-katakana "japan-util" "\ Convert argument to Katakana and return that. The argument may be a character or string. The result has the same type. The argument object is not altered--the value is a copy. Optional argument HANKAKU t means to convert to `hankaku' Katakana (`japanese-jisx0201-kana'), in which case return value may be a string even if OBJ is a character if two Katakanas are necessary to represent OBJ. \(fn OBJ &optional HANKAKU)" nil nil) (autoload 'japanese-hiragana "japan-util" "\ Convert argument to Hiragana and return that. The argument may be a character or string. The result has the same type. The argument object is not altered--the value is a copy. \(fn OBJ)" nil nil) (autoload 'japanese-hankaku "japan-util" "\ Convert argument to `hankaku' and return that. The argument may be a character or string. The result has the same type. The argument object is not altered--the value is a copy. Optional argument ASCII-ONLY non-nil means to return only ASCII character. \(fn OBJ &optional ASCII-ONLY)" nil nil) (autoload 'japanese-zenkaku "japan-util" "\ Convert argument to `zenkaku' and return that. The argument may be a character or string. The result has the same type. The argument object is not altered--the value is a copy. \(fn OBJ)" nil nil) (autoload 'japanese-katakana-region "japan-util" "\ Convert Japanese `hiragana' chars in the region to `katakana' chars. Optional argument HANKAKU t means to convert to `hankaku katakana' character of which charset is `japanese-jisx0201-kana'. \(fn FROM TO &optional HANKAKU)" t nil) (autoload 'japanese-hiragana-region "japan-util" "\ Convert Japanese `katakana' chars in the region to `hiragana' chars. \(fn FROM TO)" t nil) (autoload 'japanese-hankaku-region "japan-util" "\ Convert Japanese `zenkaku' chars in the region to `hankaku' chars. `Zenkaku' chars belong to `japanese-jisx0208' `Hankaku' chars belong to `ascii' or `japanese-jisx0201-kana'. Optional argument ASCII-ONLY non-nil means to convert only to ASCII char. \(fn FROM TO &optional ASCII-ONLY)" t nil) (autoload 'japanese-zenkaku-region "japan-util" "\ Convert hankaku' chars in the region to Japanese `zenkaku' chars. `Zenkaku' chars belong to `japanese-jisx0208' `Hankaku' chars belong to `ascii' or `japanese-jisx0201-kana'. Optional argument KATAKANA-ONLY non-nil means to convert only KATAKANA char. \(fn FROM TO &optional KATAKANA-ONLY)" t nil) (autoload 'read-hiragana-string "japan-util" "\ Read a Hiragana string from the minibuffer, prompting with string PROMPT. If non-nil, second arg INITIAL-INPUT is a string to insert before reading. \(fn PROMPT &optional INITIAL-INPUT)" nil nil) ;;;*** ;;;### (autoloads (jka-compr-uninstall jka-compr-handler) "jka-compr" ;;;;;; "jka-compr.el" (19259 35423)) ;;; Generated autoloads from jka-compr.el (defvar jka-compr-inhibit nil "\ Non-nil means inhibit automatic uncompression temporarily. Lisp programs can bind this to t to do that. It is not recommended to set this variable permanently to anything but nil.") (autoload 'jka-compr-handler "jka-compr" "\ Not documented \(fn OPERATION &rest ARGS)" nil nil) (autoload 'jka-compr-uninstall "jka-compr" "\ Uninstall jka-compr. This removes the entries in `file-name-handler-alist' and `auto-mode-alist' and `inhibit-first-line-modes-suffixes' that were added by `jka-compr-installed'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (js-mode) "js" "progmodes/js.el" (19259 35423)) ;;; Generated autoloads from progmodes/js.el (autoload 'js-mode "js" "\ Major mode for editing JavaScript. Key bindings: \\{js-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (keypad-setup keypad-numlock-shifted-setup keypad-shifted-setup ;;;;;; keypad-numlock-setup keypad-setup) "keypad" "emulation/keypad.el" ;;;;;; (19259 35423)) ;;; Generated autoloads from emulation/keypad.el (defvar keypad-setup nil "\ Specifies the keypad setup for unshifted keypad keys when NumLock is off. When selecting the plain numeric keypad setup, the character returned by the decimal key must be specified.") (custom-autoload 'keypad-setup "keypad" nil) (defvar keypad-numlock-setup nil "\ Specifies the keypad setup for unshifted keypad keys when NumLock is on. When selecting the plain numeric keypad setup, the character returned by the decimal key must be specified.") (custom-autoload 'keypad-numlock-setup "keypad" nil) (defvar keypad-shifted-setup nil "\ Specifies the keypad setup for shifted keypad keys when NumLock is off. When selecting the plain numeric keypad setup, the character returned by the decimal key must be specified.") (custom-autoload 'keypad-shifted-setup "keypad" nil) (defvar keypad-numlock-shifted-setup nil "\ Specifies the keypad setup for shifted keypad keys when NumLock is off. When selecting the plain numeric keypad setup, the character returned by the decimal key must be specified.") (custom-autoload 'keypad-numlock-shifted-setup "keypad" nil) (autoload 'keypad-setup "keypad" "\ Set keypad bindings in `function-key-map' according to SETUP. If optional second argument NUMLOCK is non-nil, the NumLock On bindings are changed. Otherwise, the NumLock Off bindings are changed. If optional third argument SHIFT is non-nil, the shifted keypad keys are bound. Setup Binding ------------------------------------------------------------- 'prefix Command prefix argument, i.e. M-0 .. M-9 and M-- 'S-cursor Bind shifted keypad keys to the shifted cursor movement keys. 'cursor Bind keypad keys to the cursor movement keys. 'numeric Plain numeric keypad, i.e. 0 .. 9 and . (or DECIMAL arg) 'none Removes all bindings for keypad keys in function-key-map; this enables any user-defined bindings for the keypad keys in the global and local keymaps. If SETUP is 'numeric and the optional fourth argument DECIMAL is non-nil, the decimal key on the keypad is mapped to DECIMAL instead of `.' \(fn SETUP &optional NUMLOCK SHIFT DECIMAL)" nil nil) ;;;*** ;;;### (autoloads (kinsoku) "kinsoku" "international/kinsoku.el" ;;;;;; (19259 35423)) ;;; Generated autoloads from international/kinsoku.el (autoload 'kinsoku "kinsoku" "\ Go to a line breaking position near point by doing `kinsoku' processing. LINEBEG is a buffer position we can't break a line before. `Kinsoku' processing is to prohibit specific characters to be placed at beginning of line or at end of line. Characters not to be placed at beginning and end of line have character category `>' and `<' respectively. This restriction is dissolved by making a line longer or shorter. `Kinsoku' is a Japanese word which originally means ordering to stay in one place, and is used for the text processing described above in the context of text formatting. \(fn LINEBEG)" nil nil) ;;;*** ;;;### (autoloads (kkc-region) "kkc" "international/kkc.el" (19259 ;;;;;; 35423)) ;;; Generated autoloads from international/kkc.el (defvar kkc-after-update-conversion-functions nil "\ Functions to run after a conversion is selected in `japanese' input method. With this input method, a user can select a proper conversion from candidate list. Each time he changes the selection, functions in this list are called with two arguments; starting and ending buffer positions that contains the current selection.") (autoload 'kkc-region "kkc" "\ Convert Kana string in the current region to Kanji-Kana mixed string. Users can select a desirable conversion interactively. When called from a program, expects two arguments, positions FROM and TO (integers or markers) specifying the target region. When it returns, the point is at the tail of the selected conversion, and the return value is the length of the conversion. \(fn FROM TO)" t nil) ;;;*** ;;;### (autoloads (kmacro-end-call-mouse kmacro-end-and-call-macro ;;;;;; kmacro-end-or-call-macro kmacro-start-macro-or-insert-counter ;;;;;; kmacro-call-macro kmacro-end-macro kmacro-start-macro kmacro-exec-ring-item) ;;;;;; "kmacro" "kmacro.el" (19259 35423)) ;;; Generated autoloads from kmacro.el (global-set-key "\C-x(" 'kmacro-start-macro) (global-set-key "\C-x)" 'kmacro-end-macro) (global-set-key "\C-xe" 'kmacro-end-and-call-macro) (global-set-key [f3] 'kmacro-start-macro-or-insert-counter) (global-set-key [f4] 'kmacro-end-or-call-macro) (global-set-key "\C-x\C-k" 'kmacro-keymap) (autoload 'kmacro-keymap "kmacro" "Keymap for keyboard macro commands." t 'keymap) (autoload 'kmacro-exec-ring-item "kmacro" "\ Execute item ITEM from the macro ring. \(fn ITEM ARG)" nil nil) (autoload 'kmacro-start-macro "kmacro" "\ Record subsequent keyboard input, defining a keyboard macro. The commands are recorded even as they are executed. Use \\[kmacro-end-macro] to finish recording and make the macro available. Use \\[kmacro-end-and-call-macro] to execute the macro. Non-nil arg (prefix arg) means append to last macro defined. With \\[universal-argument] prefix, append to last keyboard macro defined. Depending on `kmacro-execute-before-append', this may begin by re-executing the last macro as if you typed it again. Otherwise, it sets `kmacro-counter' to ARG or 0 if missing before defining the macro. Use \\[kmacro-insert-counter] to insert (and increment) the macro counter. The counter value can be set or modified via \\[kmacro-set-counter] and \\[kmacro-add-counter]. The format of the counter can be modified via \\[kmacro-set-format]. Use \\[kmacro-name-last-macro] to give it a permanent name. Use \\[kmacro-bind-to-key] to bind it to a key sequence. \(fn ARG)" t nil) (autoload 'kmacro-end-macro "kmacro" "\ Finish defining a keyboard macro. The definition was started by \\[kmacro-start-macro]. The macro is now available for use via \\[kmacro-call-macro], or it can be given a name with \\[kmacro-name-last-macro] and then invoked under that name. With numeric arg, repeat macro now that many times, counting the definition just completed as the first repetition. An argument of zero means repeat until error. \(fn ARG)" t nil) (autoload 'kmacro-call-macro "kmacro" "\ Call the last keyboard macro that you defined with \\[kmacro-start-macro]. A prefix argument serves as a repeat count. Zero means repeat until error. When you call the macro, you can call the macro again by repeating just the last key in the key sequence that you used to call this command. See `kmacro-call-repeat-key' and `kmacro-call-repeat-with-arg' for details on how to adjust or disable this behavior. To make a macro permanent so you can call it even after defining others, use \\[kmacro-name-last-macro]. \(fn ARG &optional NO-REPEAT END-MACRO)" t nil) (autoload 'kmacro-start-macro-or-insert-counter "kmacro" "\ Record subsequent keyboard input, defining a keyboard macro. The commands are recorded even as they are executed. Sets the `kmacro-counter' to ARG (or 0 if no prefix arg) before defining the macro. With \\[universal-argument], appends to current keyboard macro (keeping the current value of `kmacro-counter'). When defining/executing macro, inserts macro counter and increments the counter with ARG or 1 if missing. With \\[universal-argument], inserts previous `kmacro-counter' (but do not modify counter). The macro counter can be modified via \\[kmacro-set-counter] and \\[kmacro-add-counter]. The format of the counter can be modified via \\[kmacro-set-format]. \(fn ARG)" t nil) (autoload 'kmacro-end-or-call-macro "kmacro" "\ End kbd macro if currently being defined; else call last kbd macro. With numeric prefix ARG, repeat macro that many times. With \\[universal-argument], call second macro in macro ring. \(fn ARG &optional NO-REPEAT)" t nil) (autoload 'kmacro-end-and-call-macro "kmacro" "\ Call last keyboard macro, ending it first if currently being defined. With numeric prefix ARG, repeat macro that many times. Zero argument means repeat until there is an error. To give a macro a permanent name, so you can call it even after defining other macros, use \\[kmacro-name-last-macro]. \(fn ARG &optional NO-REPEAT)" t nil) (autoload 'kmacro-end-call-mouse "kmacro" "\ Move point to the position clicked with the mouse and call last kbd macro. If kbd macro currently being defined end it before activating it. \(fn EVENT)" t nil) ;;;*** ;;;### (autoloads (setup-korean-environment-internal) "korea-util" ;;;;;; "language/korea-util.el" (19259 35423)) ;;; Generated autoloads from language/korea-util.el (defvar default-korean-keyboard (purecopy (if (string-match "3" (or (getenv "HANGUL_KEYBOARD_TYPE") "")) "3" "")) "\ *The kind of Korean keyboard for Korean input method. \"\" for 2, \"3\" for 3.") (autoload 'setup-korean-environment-internal "korea-util" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads (lm lm-test-run) "landmark" "play/landmark.el" ;;;;;; (19259 35423)) ;;; Generated autoloads from play/landmark.el (defalias 'landmark-repeat 'lm-test-run) (autoload 'lm-test-run "landmark" "\ Run 100 Lm games, each time saving the weights from the previous game. \(fn)" t nil) (defalias 'landmark 'lm) (autoload 'lm "landmark" "\ Start or resume an Lm game. If a game is in progress, this command allows you to resume it. Here is the relation between prefix args and game options: prefix arg | robot is auto-started | weights are saved from last game --------------------------------------------------------------------- none / 1 | yes | no 2 | yes | yes 3 | no | yes 4 | no | no You start by moving to a square and typing \\[lm-start-robot], if you did not use a prefix arg to ask for automatic start. Use \\[describe-mode] for more info. \(fn PARG)" t nil) ;;;*** ;;;### (autoloads (lao-compose-region lao-composition-function lao-transcribe-roman-to-lao-string ;;;;;; lao-transcribe-single-roman-syllable-to-lao lao-compose-string) ;;;;;; "lao-util" "language/lao-util.el" (19259 35423)) ;;; Generated autoloads from language/lao-util.el (autoload 'lao-compose-string "lao-util" "\ Not documented \(fn STR)" nil nil) (autoload 'lao-transcribe-single-roman-syllable-to-lao "lao-util" "\ Transcribe a Romanized Lao syllable in the region FROM and TO to Lao string. Only the first syllable is transcribed. The value has the form: (START END LAO-STRING), where START and END are the beggining and end positions of the Roman Lao syllable, LAO-STRING is the Lao character transcription of it. Optional 3rd arg STR, if non-nil, is a string to search for Roman Lao syllable. In that case, FROM and TO are indexes to STR. \(fn FROM TO &optional STR)" nil nil) (autoload 'lao-transcribe-roman-to-lao-string "lao-util" "\ Transcribe Romanized Lao string STR to Lao character string. \(fn STR)" nil nil) (autoload 'lao-composition-function "lao-util" "\ Not documented \(fn GSTRING)" nil nil) (autoload 'lao-compose-region "lao-util" "\ Not documented \(fn FROM TO)" t nil) ;;;*** ;;;### (autoloads (latexenc-find-file-coding-system latexenc-coding-system-to-inputenc ;;;;;; latexenc-inputenc-to-coding-system latex-inputenc-coding-alist) ;;;;;; "latexenc" "international/latexenc.el" (19259 35423)) ;;; Generated autoloads from international/latexenc.el (defvar latex-inputenc-coding-alist (purecopy '(("ansinew" . windows-1252) ("applemac" . mac-roman) ("ascii" . us-ascii) ("cp1250" . windows-1250) ("cp1252" . windows-1252) ("cp1257" . cp1257) ("cp437de" . cp437) ("cp437" . cp437) ("cp850" . cp850) ("cp852" . cp852) ("cp858" . cp858) ("cp865" . cp865) ("latin1" . iso-8859-1) ("latin2" . iso-8859-2) ("latin3" . iso-8859-3) ("latin4" . iso-8859-4) ("latin5" . iso-8859-5) ("latin9" . iso-8859-15) ("next" . next) ("utf8" . utf-8) ("utf8x" . utf-8))) "\ Mapping from LaTeX encodings in \"inputenc.sty\" to Emacs coding systems. LaTeX encodings are specified with \"\\usepackage[encoding]{inputenc}\". Used by the function `latexenc-find-file-coding-system'.") (custom-autoload 'latex-inputenc-coding-alist "latexenc" t) (autoload 'latexenc-inputenc-to-coding-system "latexenc" "\ Return the corresponding coding-system for the specified input encoding. Return nil if no matching coding system can be found. \(fn INPUTENC)" nil nil) (autoload 'latexenc-coding-system-to-inputenc "latexenc" "\ Return the corresponding input encoding for the specified coding system. Return nil if no matching input encoding can be found. \(fn CS)" nil nil) (autoload 'latexenc-find-file-coding-system "latexenc" "\ Determine the coding system of a LaTeX file if it uses \"inputenc.sty\". The mapping from LaTeX's \"inputenc.sty\" encoding names to Emacs coding system names is determined from `latex-inputenc-coding-alist'. \(fn ARG-LIST)" nil nil) ;;;*** ;;;### (autoloads (latin1-display-ucs-per-lynx latin1-display latin1-display) ;;;;;; "latin1-disp" "international/latin1-disp.el" (19259 35423)) ;;; Generated autoloads from international/latin1-disp.el (defvar latin1-display nil "\ Set up Latin-1/ASCII display for ISO8859 character sets. This is done for each character set in the list `latin1-display-sets', if no font is available to display it. Characters are displayed using the corresponding Latin-1 characters where they match. Otherwise ASCII sequences are used, mostly following the Latin prefix input methods. Some different ASCII sequences are used if `latin1-display-mnemonic' is non-nil. This option also treats some characters in the `mule-unicode-...' charsets if you don't have a Unicode font with which to display them. Setting this variable directly does not take effect; use either \\[customize] or the function `latin1-display'.") (custom-autoload 'latin1-display "latin1-disp" nil) (autoload 'latin1-display "latin1-disp" "\ Set up Latin-1/ASCII display for the arguments character SETS. See option `latin1-display' for the method. The members of the list must be in `latin1-display-sets'. With no arguments, reset the display for all of `latin1-display-sets'. See also `latin1-display-setup'. \(fn &rest SETS)" nil nil) (defvar latin1-display-ucs-per-lynx nil "\ Set up Latin-1/ASCII display for Unicode characters. This uses the transliterations of the Lynx browser. The display isn't changed if the display can render Unicode characters. Setting this variable directly does not take effect; use either \\[customize] or the function `latin1-display'.") (custom-autoload 'latin1-display-ucs-per-lynx "latin1-disp" nil) ;;;*** ;;;### (autoloads (ld-script-mode) "ld-script" "progmodes/ld-script.el" ;;;;;; (19259 35423)) ;;; Generated autoloads from progmodes/ld-script.el (add-to-list 'auto-mode-alist (purecopy '("\\.ld[si]?\\>" . ld-script-mode))) (add-to-list 'auto-mode-alist (purecopy '("ld\\.?script\\>" . ld-script-mode))) (add-to-list 'auto-mode-alist (purecopy '("\\.x[bdsru]?[cn]?\\'" . ld-script-mode))) (autoload 'ld-script-mode "ld-script" "\ A major mode to edit GNU ld script files \(fn)" t nil) ;;;*** ;;;### (autoloads (ledit-from-lisp-mode ledit-mode) "ledit" "ledit.el" ;;;;;; (19259 35423)) ;;; Generated autoloads from ledit.el (defconst ledit-save-files t "\ *Non-nil means Ledit should save files before transferring to Lisp.") (defconst ledit-go-to-lisp-string "%?lisp" "\ *Shell commands to execute to resume Lisp job.") (defconst ledit-go-to-liszt-string "%?liszt" "\ *Shell commands to execute to resume Lisp compiler job.") (autoload 'ledit-mode "ledit" "\ \\<ledit-mode-map>Major mode for editing text and stuffing it to a Lisp job. Like Lisp mode, plus these special commands: \\[ledit-save-defun] -- record defun at or after point for later transmission to Lisp job. \\[ledit-save-region] -- record region for later transmission to Lisp job. \\[ledit-go-to-lisp] -- transfer to Lisp job and transmit saved text. \\[ledit-go-to-liszt] -- transfer to Liszt (Lisp compiler) job and transmit saved text. \\{ledit-mode-map} To make Lisp mode automatically change to Ledit mode, do (setq lisp-mode-hook 'ledit-from-lisp-mode) \(fn)" t nil) (autoload 'ledit-from-lisp-mode "ledit" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads (life) "life" "play/life.el" (19259 35423)) ;;; Generated autoloads from play/life.el (autoload 'life "life" "\ Run Conway's Life simulation. The starting pattern is randomly selected. Prefix arg (optional first arg non-nil from a program) is the number of seconds to sleep between generations (this defaults to 1). \(fn &optional SLEEPTIME)" t nil) ;;;*** ;;;### (autoloads (global-linum-mode linum-mode linum-format) "linum" ;;;;;; "linum.el" (19259 35423)) ;;; Generated autoloads from linum.el (defvar linum-format 'dynamic "\ Format used to display line numbers. Either a format string like \"%7d\", `dynamic' to adapt the width as needed, or a function that is called with a line number as its argument and should evaluate to a string to be shown on that line. See also `linum-before-numbering-hook'.") (custom-autoload 'linum-format "linum" t) (autoload 'linum-mode "linum" "\ Toggle display of line numbers in the left margin. \(fn &optional ARG)" t nil) (defvar global-linum-mode nil "\ Non-nil if Global-Linum mode is enabled. See the command `global-linum-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-linum-mode'.") (custom-autoload 'global-linum-mode "linum" nil) (autoload 'global-linum-mode "linum" "\ Toggle Linum mode in every possible buffer. With prefix ARG, turn Global-Linum mode on if and only if ARG is positive. Linum mode is enabled in all buffers where `linum-on' would do it. See `linum-mode' for more information on Linum mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (unload-feature) "loadhist" "loadhist.el" (19259 ;;;;;; 35423)) ;;; Generated autoloads from loadhist.el (autoload 'unload-feature "loadhist" "\ Unload the library that provided FEATURE. If the feature is required by any other loaded code, and prefix arg FORCE is nil, raise an error. Standard unloading activities include restoring old autoloads for functions defined by the library, undoing any additions that the library has made to hook variables or to `auto-mode-alist', undoing ELP profiling of functions in that library, unproviding any features provided by the library, and canceling timers held in variables defined by the library. If a function `FEATURE-unload-function' is defined, this function calls it with no arguments, before doing anything else. That function can do whatever is appropriate to undo the loading of the library. If `FEATURE-unload-function' returns non-nil, that suppresses the standard unloading of the library. Otherwise the standard unloading proceeds. `FEATURE-unload-function' has access to the package's list of definitions in the variable `unload-function-defs-list' and could remove symbols from it in the event that the package has done something strange, such as redefining an Emacs function. \(fn FEATURE &optional FORCE)" t nil) ;;;*** ;;;### (autoloads (locate-with-filter locate locate-ls-subdir-switches) ;;;;;; "locate" "locate.el" (19259 35425)) ;;; Generated autoloads from locate.el (defvar locate-ls-subdir-switches (purecopy "-al") "\ `ls' switches for inserting subdirectories in `*Locate*' buffers. This should contain the \"-l\" switch, but not the \"-F\" or \"-b\" switches.") (custom-autoload 'locate-ls-subdir-switches "locate" t) (autoload 'locate "locate" "\ Run the program `locate', putting results in `*Locate*' buffer. Pass it SEARCH-STRING as argument. Interactively, prompt for SEARCH-STRING. With prefix arg, prompt for the exact shell command to run instead. This program searches for those file names in a database that match SEARCH-STRING and normally outputs all matching absolute file names, one per line. The database normally consists of all files on your system, or of all files that you have access to. Consult the documentation of the program for the details about how it determines which file names match SEARCH-STRING. (Those details vary highly with the version.) You can specify another program for this command to run by customizing the variables `locate-command' or `locate-make-command-line'. The main use of FILTER is to implement `locate-with-filter'. See the docstring of that function for its meaning. ARG is the interactive prefix arg. \(fn SEARCH-STRING &optional FILTER ARG)" t nil) (autoload 'locate-with-filter "locate" "\ Run the executable program `locate' with a filter. This function is similar to the function `locate', which see. The difference is that, when invoked interactively, the present function prompts for both SEARCH-STRING and FILTER. It passes SEARCH-STRING to the locate executable program. It produces a `*Locate*' buffer that lists only those lines in the output of the locate program that contain a match for the regular expression FILTER; this is often useful to constrain a big search. ARG is the interactive prefix arg, which has the same effect as in `locate'. When called from Lisp, this function is identical with `locate', except that FILTER is not optional. \(fn SEARCH-STRING FILTER &optional ARG)" t nil) ;;;*** ;;;### (autoloads (log-edit) "log-edit" "log-edit.el" (19259 35425)) ;;; Generated autoloads from log-edit.el (autoload 'log-edit "log-edit" "\ Setup a buffer to enter a log message. \\<log-edit-mode-map>The buffer will be put in `log-edit-mode'. If SETUP is non-nil, the buffer is then erased and `log-edit-hook' is run. Mark and point will be set around the entire contents of the buffer so that it is easy to kill the contents of the buffer with \\[kill-region]. Once you're done editing the message, pressing \\[log-edit-done] will call `log-edit-done' which will end up calling CALLBACK to do the actual commit. PARAMS if non-nil is an alist. Possible keys and associated values: `log-edit-listfun' -- function taking no arguments that returns the list of files that are concerned by the current operation (using relative names); `log-edit-diff-function' -- function taking no arguments that displays a diff of the files concerned by the current operation. If BUFFER is non-nil `log-edit' will jump to that buffer, use it to edit the log message and go back to the current buffer when done. Otherwise, it uses the current buffer. \(fn CALLBACK &optional SETUP PARAMS BUFFER &rest IGNORE)" nil nil) ;;;*** ;;;### (autoloads (log-view-mode) "log-view" "log-view.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from log-view.el (autoload 'log-view-mode "log-view" "\ Major mode for browsing CVS log output. \(fn)" t nil) ;;;*** ;;;### (autoloads (longlines-mode) "longlines" "longlines.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from longlines.el (autoload 'longlines-mode "longlines" "\ Toggle Long Lines mode. In Long Lines mode, long lines are wrapped if they extend beyond `fill-column'. The soft newlines used for line wrapping will not show up when the text is yanked or saved to disk. If the variable `longlines-auto-wrap' is non-nil, lines are automatically wrapped whenever the buffer is changed. You can always call `fill-paragraph' to fill individual paragraphs. If the variable `longlines-show-hard-newlines' is non-nil, hard newlines are indicated with a symbol. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (print-region lpr-region print-buffer lpr-buffer ;;;;;; lpr-command lpr-switches printer-name) "lpr" "lpr.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from lpr.el (defvar lpr-windows-system (memq system-type '(ms-dos windows-nt))) (defvar lpr-lp-system (memq system-type '(usg-unix-v hpux irix))) (defvar printer-name (and (eq system-type 'ms-dos) "PRN") "\ The name of a local printer to which data is sent for printing. \(Note that PostScript files are sent to `ps-printer-name', which see.) On Unix-like systems, a string value should be a name understood by lpr's -P option; otherwise the value should be nil. On MS-DOS and MS-Windows systems, a string value is taken as the name of a printer device or port, provided `lpr-command' is set to \"\". Typical non-default settings would be \"LPT1\" to \"LPT3\" for parallel printers, or \"COM1\" to \"COM4\" or \"AUX\" for serial printers, or \"//hostname/printer\" for a shared network printer. You can also set it to the name of a file, in which case the output gets appended to that file. If you want to discard the printed output, set this to \"NUL\".") (custom-autoload 'printer-name "lpr" t) (defvar lpr-switches nil "\ List of strings to pass as extra options for the printer program. It is recommended to set `printer-name' instead of including an explicit switch on this list. See `lpr-command'.") (custom-autoload 'lpr-switches "lpr" t) (defvar lpr-command (purecopy (cond (lpr-windows-system "") (lpr-lp-system "lp") (t "lpr"))) "\ Name of program for printing a file. On MS-DOS and MS-Windows systems, if the value is an empty string then Emacs will write directly to the printer port named by `printer-name'. The programs `print' and `nprint' (the standard print programs on Windows NT and Novell Netware respectively) are handled specially, using `printer-name' as the destination for output; any other program is treated like `lpr' except that an explicit filename is given as the last argument.") (custom-autoload 'lpr-command "lpr" t) (autoload 'lpr-buffer "lpr" "\ Print buffer contents without pagination or page headers. See the variables `lpr-switches' and `lpr-command' for customization of the printer command. \(fn)" t nil) (autoload 'print-buffer "lpr" "\ Paginate and print buffer contents. The variable `lpr-headers-switches' controls how to paginate. If it is nil (the default), we run the `pr' program (or whatever program `lpr-page-header-program' specifies) to paginate. `lpr-page-header-switches' specifies the switches for that program. Otherwise, the switches in `lpr-headers-switches' are used in the print command itself; we expect them to request pagination. See the variables `lpr-switches' and `lpr-command' for further customization of the printer command. \(fn)" t nil) (autoload 'lpr-region "lpr" "\ Print region contents without pagination or page headers. See the variables `lpr-switches' and `lpr-command' for customization of the printer command. \(fn START END)" t nil) (autoload 'print-region "lpr" "\ Paginate and print the region contents. The variable `lpr-headers-switches' controls how to paginate. If it is nil (the default), we run the `pr' program (or whatever program `lpr-page-header-program' specifies) to paginate. `lpr-page-header-switches' specifies the switches for that program. Otherwise, the switches in `lpr-headers-switches' are used in the print command itself; we expect them to request pagination. See the variables `lpr-switches' and `lpr-command' for further customization of the printer command. \(fn START END)" t nil) ;;;*** ;;;### (autoloads (ls-lisp-support-shell-wildcards) "ls-lisp" "ls-lisp.el" ;;;;;; (19259 35423)) ;;; Generated autoloads from ls-lisp.el (defvar ls-lisp-support-shell-wildcards t "\ Non-nil means ls-lisp treats file patterns as shell wildcards. Otherwise they are treated as Emacs regexps (for backward compatibility).") (custom-autoload 'ls-lisp-support-shell-wildcards "ls-lisp" t) ;;;*** ;;;### (autoloads (lunar-phases) "lunar" "calendar/lunar.el" (19259 ;;;;;; 35423)) ;;; Generated autoloads from calendar/lunar.el (autoload 'lunar-phases "lunar" "\ Display the quarters of the moon for last month, this month, and next month. If called with an optional prefix argument ARG, prompts for month and year. This function is suitable for execution in a .emacs file. \(fn &optional ARG)" t nil) (define-obsolete-function-alias 'phases-of-moon 'lunar-phases "23.1") ;;;*** ;;;### (autoloads (m4-mode) "m4-mode" "progmodes/m4-mode.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from progmodes/m4-mode.el (autoload 'm4-mode "m4-mode" "\ A major mode to edit m4 macro files. \\{m4-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (macroexpand-all) "macroexp" "emacs-lisp/macroexp.el" ;;;;;; (19259 35425)) ;;; Generated autoloads from emacs-lisp/macroexp.el (autoload 'macroexpand-all "macroexp" "\ Return result of expanding macros at all levels in FORM. If no macros are expanded, FORM is returned unchanged. The second optional arg ENVIRONMENT specifies an environment of macro definitions to shadow the loaded ones for use in file byte-compilation. \(fn FORM &optional ENVIRONMENT)" nil nil) ;;;*** ;;;### (autoloads (apply-macro-to-region-lines kbd-macro-query insert-kbd-macro ;;;;;; name-last-kbd-macro) "macros" "macros.el" (19259 35425)) ;;; Generated autoloads from macros.el (autoload 'name-last-kbd-macro "macros" "\ Assign a name to the last keyboard macro defined. Argument SYMBOL is the name to define. The symbol's function definition becomes the keyboard macro string. Such a \"function\" cannot be called from Lisp, but it is a valid editor command. \(fn SYMBOL)" t nil) (autoload 'insert-kbd-macro "macros" "\ Insert in buffer the definition of kbd macro NAME, as Lisp code. Optional second arg KEYS means also record the keys it is on \(this is the prefix argument, when calling interactively). This Lisp code will, when executed, define the kbd macro with the same definition it has now. If you say to record the keys, the Lisp code will also rebind those keys to the macro. Only global key bindings are recorded since executing this Lisp code always makes global bindings. To save a kbd macro, visit a file of Lisp code such as your `~/.emacs', use this command, and then save the file. \(fn MACRONAME &optional KEYS)" t nil) (autoload 'kbd-macro-query "macros" "\ Query user during kbd macro execution. With prefix argument, enters recursive edit, reading keyboard commands even within a kbd macro. You can give different commands each time the macro executes. Without prefix argument, asks whether to continue running the macro. Your options are: \\<query-replace-map> \\[act] Finish this iteration normally and continue with the next. \\[skip] Skip the rest of this iteration, and start the next. \\[exit] Stop the macro entirely right now. \\[recenter] Redisplay the screen, then ask again. \\[edit] Enter recursive edit; ask again when you exit from that. \(fn FLAG)" t nil) (autoload 'apply-macro-to-region-lines "macros" "\ Apply last keyboard macro to all lines in the region. For each line that begins in the region, move to the beginning of the line, and run the last keyboard macro. When called from lisp, this function takes two arguments TOP and BOTTOM, describing the current region. TOP must be before BOTTOM. The optional third argument MACRO specifies a keyboard macro to execute. This is useful for quoting or unquoting included text, adding and removing comments, or producing tables where the entries are regular. For example, in Usenet articles, sections of text quoted from another author are indented, or have each line start with `>'. To quote a section of text, define a keyboard macro which inserts `>', put point and mark at opposite ends of the quoted section, and use `\\[apply-macro-to-region-lines]' to mark the entire section. Suppose you wanted to build a keyword table in C where each entry looked like this: { \"foo\", foo_data, foo_function }, { \"bar\", bar_data, bar_function }, { \"baz\", baz_data, baz_function }, You could enter the names in this format: foo bar baz and write a macro to massage a word into a table entry: \\C-x ( \\M-d { \"\\C-y\", \\C-y_data, \\C-y_function }, \\C-x ) and then select the region of un-tablified names and use `\\[apply-macro-to-region-lines]' to build the table from the names. \(fn TOP BOTTOM &optional MACRO)" t nil) (define-key ctl-x-map "q" 'kbd-macro-query) ;;;*** ;;;### (autoloads (what-domain mail-extract-address-components) "mail-extr" ;;;;;; "mail/mail-extr.el" (19259 35425)) ;;; Generated autoloads from mail/mail-extr.el (autoload 'mail-extract-address-components "mail-extr" "\ Given an RFC-822 address ADDRESS, extract full name and canonical address. Returns a list of the form (FULL-NAME CANONICAL-ADDRESS). If no name can be extracted, FULL-NAME will be nil. Also see `mail-extr-ignore-single-names' and `mail-extr-ignore-realname-equals-mailbox-name'. If the optional argument ALL is non-nil, then ADDRESS can contain zero or more recipients, separated by commas, and we return a list of the form ((FULL-NAME CANONICAL-ADDRESS) ...) with one element for each recipient. If ALL is nil, then if ADDRESS contains more than one recipients, all but the first is ignored. ADDRESS may be a string or a buffer. If it is a buffer, the visible \(narrowed) portion of the buffer will be interpreted as the address. \(This feature exists so that the clever caller might be able to avoid consing a string.) \(fn ADDRESS &optional ALL)" nil nil) (autoload 'what-domain "mail-extr" "\ Convert mail domain DOMAIN to the country it corresponds to. \(fn DOMAIN)" t nil) ;;;*** ;;;### (autoloads (mail-hist-put-headers-into-history mail-hist-keep-history ;;;;;; mail-hist-enable mail-hist-define-keys) "mail-hist" "mail/mail-hist.el" ;;;;;; (19259 35425)) ;;; Generated autoloads from mail/mail-hist.el (autoload 'mail-hist-define-keys "mail-hist" "\ Define keys for accessing mail header history. For use in hooks. \(fn)" nil nil) (autoload 'mail-hist-enable "mail-hist" "\ Not documented \(fn)" nil nil) (defvar mail-hist-keep-history t "\ *Non-nil means keep a history for headers and text of outgoing mail.") (custom-autoload 'mail-hist-keep-history "mail-hist" t) (autoload 'mail-hist-put-headers-into-history "mail-hist" "\ Put headers and contents of this message into mail header history. Each header has its own independent history, as does the body of the message. This function normally would be called when the message is sent. \(fn)" nil nil) ;;;*** ;;;### (autoloads (mail-fetch-field mail-unquote-printable-region ;;;;;; mail-unquote-printable mail-quote-printable-region mail-quote-printable ;;;;;; mail-file-babyl-p mail-use-rfc822) "mail-utils" "mail/mail-utils.el" ;;;;;; (19259 35425)) ;;; Generated autoloads from mail/mail-utils.el (defvar mail-use-rfc822 nil "\ If non-nil, use a full, hairy RFC822 parser on mail addresses. Otherwise, (the default) use a smaller, somewhat faster, and often correct parser.") (custom-autoload 'mail-use-rfc822 "mail-utils" t) (autoload 'mail-file-babyl-p "mail-utils" "\ Return non-nil if FILE is a Babyl file. \(fn FILE)" nil nil) (autoload 'mail-quote-printable "mail-utils" "\ Convert a string to the \"quoted printable\" Q encoding. If the optional argument WRAPPER is non-nil, we add the wrapper characters =?ISO-8859-1?Q?....?=. \(fn STRING &optional WRAPPER)" nil nil) (autoload 'mail-quote-printable-region "mail-utils" "\ Convert the region to the \"quoted printable\" Q encoding. If the optional argument WRAPPER is non-nil, we add the wrapper characters =?ISO-8859-1?Q?....?=. \(fn BEG END &optional WRAPPER)" t nil) (autoload 'mail-unquote-printable "mail-utils" "\ Undo the \"quoted printable\" encoding. If the optional argument WRAPPER is non-nil, we expect to find and remove the wrapper characters =?ISO-8859-1?Q?....?=. \(fn STRING &optional WRAPPER)" nil nil) (autoload 'mail-unquote-printable-region "mail-utils" "\ Undo the \"quoted printable\" encoding in buffer from BEG to END. If the optional argument WRAPPER is non-nil, we expect to find and remove the wrapper characters =?ISO-8859-1?Q?....?=. If NOERROR is non-nil, return t if successful. If UNIBYTE is non-nil, insert converted characters as unibyte. That is useful if you are going to character code decoding afterward, as Rmail does. \(fn BEG END &optional WRAPPER NOERROR UNIBYTE)" t nil) (autoload 'mail-fetch-field "mail-utils" "\ Return the value of the header field whose type is FIELD-NAME. If second arg LAST is non-nil, use the last field of type FIELD-NAME. If third arg ALL is non-nil, concatenate all such fields with commas between. If 4th arg LIST is non-nil, return a list of all such fields. The buffer should be narrowed to just the header, else false matches may be returned from the message body. \(fn FIELD-NAME &optional LAST ALL LIST)" nil nil) ;;;*** ;;;### (autoloads (define-mail-abbrev build-mail-abbrevs mail-abbrevs-setup ;;;;;; mail-abbrevs-mode) "mailabbrev" "mail/mailabbrev.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from mail/mailabbrev.el (defvar mail-abbrevs-mode nil "\ Non-nil if Mail-Abbrevs mode is enabled. See the command `mail-abbrevs-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `mail-abbrevs-mode'.") (custom-autoload 'mail-abbrevs-mode "mailabbrev" nil) (autoload 'mail-abbrevs-mode "mailabbrev" "\ Non-nil means expand mail aliases as abbrevs, in certain message headers. \(fn &optional ARG)" t nil) (autoload 'mail-abbrevs-setup "mailabbrev" "\ Initialize use of the `mailabbrev' package. \(fn)" nil nil) (autoload 'build-mail-abbrevs "mailabbrev" "\ Read mail aliases from personal mail alias file and set `mail-abbrevs'. By default this is the file specified by `mail-personal-alias-file'. \(fn &optional FILE RECURSIVEP)" nil nil) (autoload 'define-mail-abbrev "mailabbrev" "\ Define NAME as a mail alias abbrev that translates to DEFINITION. If DEFINITION contains multiple addresses, separate them with commas. Optional argument FROM-MAILRC-FILE means that DEFINITION comes from a mailrc file. In that case, addresses are separated with spaces and addresses with embedded spaces are surrounded by double-quotes. \(fn NAME DEFINITION &optional FROM-MAILRC-FILE)" t nil) ;;;*** ;;;### (autoloads (mail-complete define-mail-alias expand-mail-aliases ;;;;;; mail-complete-style) "mailalias" "mail/mailalias.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from mail/mailalias.el (defvar mail-complete-style 'angles "\ Specifies how \\[mail-complete] formats the full name when it completes. If `nil', they contain just the return address like: king@grassland.com If `parens', they look like: king@grassland.com (Elvis Parsley) If `angles', they look like: Elvis Parsley <king@grassland.com>") (custom-autoload 'mail-complete-style "mailalias" t) (autoload 'expand-mail-aliases "mailalias" "\ Expand all mail aliases in suitable header fields found between BEG and END. If interactive, expand in header fields. Suitable header fields are `To', `From', `CC' and `BCC', `Reply-to', and their `Resent-' variants. Optional second arg EXCLUDE may be a regular expression defining text to be removed from alias expansions. \(fn BEG END &optional EXCLUDE)" t nil) (autoload 'define-mail-alias "mailalias" "\ Define NAME as a mail alias that translates to DEFINITION. This means that sending a message to NAME will actually send to DEFINITION. Normally, the addresses in DEFINITION must be separated by commas. If FROM-MAILRC-FILE is non-nil, then addresses in DEFINITION can be separated by spaces; an address can contain spaces if it is quoted with double-quotes. \(fn NAME DEFINITION &optional FROM-MAILRC-FILE)" t nil) (autoload 'mail-complete "mailalias" "\ Perform completion on header field or word preceding point. Completable headers are according to `mail-complete-alist'. If none matches current header, calls `mail-complete-function' and passes prefix arg if any. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (mailclient-send-it) "mailclient" "mail/mailclient.el" ;;;;;; (19259 35425)) ;;; Generated autoloads from mail/mailclient.el (autoload 'mailclient-send-it "mailclient" "\ Pass current buffer on to the system's mail client. Suitable value for `send-mail-function'. The mail client is taken to be the handler of mailto URLs. \(fn)" nil nil) ;;;*** ;;;### (autoloads (makefile-imake-mode makefile-bsdmake-mode makefile-makepp-mode ;;;;;; makefile-gmake-mode makefile-automake-mode makefile-mode) ;;;;;; "make-mode" "progmodes/make-mode.el" (19259 35425)) ;;; Generated autoloads from progmodes/make-mode.el (autoload 'makefile-mode "make-mode" "\ Major mode for editing standard Makefiles. If you are editing a file for a different make, try one of the variants `makefile-automake-mode', `makefile-gmake-mode', `makefile-makepp-mode', `makefile-bsdmake-mode' or, `makefile-imake-mode'. All but the last should be correctly chosen based on the file name, except if it is *.mk. This function ends by invoking the function(s) `makefile-mode-hook'. It is strongly recommended to use `font-lock-mode', because that provides additional parsing information. This is used for example to see that a rule action `echo foo: bar' is a not rule dependency, despite the colon. \\{makefile-mode-map} In the browser, use the following keys: \\{makefile-browser-map} Makefile mode can be configured by modifying the following variables: `makefile-browser-buffer-name': Name of the macro- and target browser buffer. `makefile-target-colon': The string that gets appended to all target names inserted by `makefile-insert-target'. \":\" or \"::\" are quite common values. `makefile-macro-assign': The string that gets appended to all macro names inserted by `makefile-insert-macro'. The normal value should be \" = \", since this is what standard make expects. However, newer makes such as dmake allow a larger variety of different macro assignments, so you might prefer to use \" += \" or \" := \" . `makefile-tab-after-target-colon': If you want a TAB (instead of a space) to be appended after the target colon, then set this to a non-nil value. `makefile-browser-leftmost-column': Number of blanks to the left of the browser selection mark. `makefile-browser-cursor-column': Column in which the cursor is positioned when it moves up or down in the browser. `makefile-browser-selected-mark': String used to mark selected entries in the browser. `makefile-browser-unselected-mark': String used to mark unselected entries in the browser. `makefile-browser-auto-advance-after-selection-p': If this variable is set to a non-nil value the cursor will automagically advance to the next line after an item has been selected in the browser. `makefile-pickup-everything-picks-up-filenames-p': If this variable is set to a non-nil value then `makefile-pickup-everything' also picks up filenames as targets (i.e. it calls `makefile-pickup-filenames-as-targets'), otherwise filenames are omitted. `makefile-cleanup-continuations': If this variable is set to a non-nil value then Makefile mode will assure that no line in the file ends with a backslash (the continuation character) followed by any whitespace. This is done by silently removing the trailing whitespace, leaving the backslash itself intact. IMPORTANT: Please note that enabling this option causes Makefile mode to MODIFY A FILE WITHOUT YOUR CONFIRMATION when \"it seems necessary\". `makefile-browser-hook': A function or list of functions to be called just before the browser is entered. This is executed in the makefile buffer. `makefile-special-targets-list': List of special targets. You will be offered to complete on one of those in the minibuffer whenever you enter a `.'. at the beginning of a line in Makefile mode. \(fn)" t nil) (autoload 'makefile-automake-mode "make-mode" "\ An adapted `makefile-mode' that knows about automake. \(fn)" t nil) (autoload 'makefile-gmake-mode "make-mode" "\ An adapted `makefile-mode' that knows about gmake. \(fn)" t nil) (autoload 'makefile-makepp-mode "make-mode" "\ An adapted `makefile-mode' that knows about makepp. \(fn)" t nil) (autoload 'makefile-bsdmake-mode "make-mode" "\ An adapted `makefile-mode' that knows about BSD make. \(fn)" t nil) (autoload 'makefile-imake-mode "make-mode" "\ An adapted `makefile-mode' that knows about imake. \(fn)" t nil) ;;;*** ;;;### (autoloads (make-command-summary) "makesum" "makesum.el" (19259 ;;;;;; 35425)) ;;; Generated autoloads from makesum.el (autoload 'make-command-summary "makesum" "\ Make a summary of current key bindings in the buffer *Summary*. Previous contents of that buffer are killed first. \(fn)" t nil) ;;;*** ;;;### (autoloads (man-follow man) "man" "man.el" (19259 35425)) ;;; Generated autoloads from man.el (defalias 'manual-entry 'man) (autoload 'man "man" "\ Get a Un*x manual page and put it in a buffer. This command is the top-level command in the man package. It runs a Un*x command to retrieve and clean a manpage in the background and places the results in a `Man-mode' browsing buffer. See variable `Man-notify-method' for what happens when the buffer is ready. If a buffer already exists for this man page, it will display immediately. For a manpage from a particular section, use either of the following. \"cat(1)\" is how cross-references appear and is passed to man as \"1 cat\". cat(1) 1 cat To see manpages from all sections related to a subject, use an \"all pages\" option (which might be \"-a\" if it's not the default), then step through with `Man-next-manpage' (\\<Man-mode-map>\\[Man-next-manpage]) etc. Add to `Man-switches' to make this option permanent. -a chmod An explicit filename can be given too. Use -l if it might otherwise look like a page name. /my/file/name.1.gz -l somefile.1 An \"apropos\" query with -k gives a buffer of matching page names or descriptions. The pattern argument is usually an \"egrep\" style regexp. -k pattern \(fn MAN-ARGS)" t nil) (autoload 'man-follow "man" "\ Get a Un*x manual page of the item under point and put it in a buffer. \(fn MAN-ARGS)" t nil) ;;;*** ;;;### (autoloads (master-mode) "master" "master.el" (19259 35425)) ;;; Generated autoloads from master.el (autoload 'master-mode "master" "\ Toggle Master mode. With no argument, this command toggles the mode. Non-null prefix argument turns on the mode. Null prefix argument turns off the mode. When Master mode is enabled, you can scroll the slave buffer using the following commands: \\{master-mode-map} The slave buffer is stored in the buffer-local variable `master-of'. You can set this variable using `master-set-slave'. You can show yourself the value of `master-of' by calling `master-show-slave'. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (minibuffer-depth-indicate-mode) "mb-depth" "mb-depth.el" ;;;;;; (19259 35425)) ;;; Generated autoloads from mb-depth.el (defvar minibuffer-depth-indicate-mode nil "\ Non-nil if Minibuffer-Depth-Indicate mode is enabled. See the command `minibuffer-depth-indicate-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `minibuffer-depth-indicate-mode'.") (custom-autoload 'minibuffer-depth-indicate-mode "mb-depth" nil) (autoload 'minibuffer-depth-indicate-mode "mb-depth" "\ Toggle Minibuffer Depth Indication mode. When active, any recursive use of the minibuffer will show the recursion depth in the minibuffer prompt. This is only useful if `enable-recursive-minibuffers' is non-nil. With prefix argument ARG, turn on if positive, otherwise off. Returns non-nil if the new state is enabled. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (message-unbold-region message-bold-region message-news-other-frame ;;;;;; message-news-other-window message-mail-other-frame message-mail-other-window ;;;;;; message-bounce message-resend message-insinuate-rmail message-forward-rmail-make-body ;;;;;; message-forward-make-body message-forward message-recover ;;;;;; message-supersede message-cancel-news message-followup message-wide-reply ;;;;;; message-reply message-news message-mail message-mode) "message" ;;;;;; "gnus/message.el" (19259 35425)) ;;; Generated autoloads from gnus/message.el (define-mail-user-agent 'message-user-agent 'message-mail 'message-send-and-exit 'message-kill-buffer 'message-send-hook) (autoload 'message-mode "message" "\ Major mode for editing mail and news to be sent. Like Text Mode but with these additional commands:\\<message-mode-map> C-c C-s `message-send' (send the message) C-c C-c `message-send-and-exit' C-c C-d Postpone sending the message C-c C-k Kill the message C-c C-f move to a header field (and create it if there isn't): C-c C-f C-t move to To C-c C-f C-s move to Subject C-c C-f C-c move to Cc C-c C-f C-b move to Bcc C-c C-f C-w move to Fcc C-c C-f C-r move to Reply-To C-c C-f C-u move to Summary C-c C-f C-n move to Newsgroups C-c C-f C-k move to Keywords C-c C-f C-d move to Distribution C-c C-f C-o move to From (\"Originator\") C-c C-f C-f move to Followup-To C-c C-f C-m move to Mail-Followup-To C-c C-f C-e move to Expires C-c C-f C-i cycle through Importance values C-c C-f s change subject and append \"(was: <Old Subject>)\" C-c C-f x crossposting with FollowUp-To header and note in body C-c C-f t replace To: header with contents of Cc: or Bcc: C-c C-f a Insert X-No-Archive: header and a note in the body C-c C-t `message-insert-to' (add a To header to a news followup) C-c C-l `message-to-list-only' (removes all but list address in to/cc) C-c C-n `message-insert-newsgroups' (add a Newsgroup header to a news reply) C-c C-b `message-goto-body' (move to beginning of message text). C-c C-i `message-goto-signature' (move to the beginning of the signature). C-c C-w `message-insert-signature' (insert `message-signature-file' file). C-c C-y `message-yank-original' (insert current message, if any). C-c C-q `message-fill-yanked-message' (fill what was yanked). C-c C-e `message-elide-region' (elide the text between point and mark). C-c C-v `message-delete-not-region' (remove the text outside the region). C-c C-z `message-kill-to-signature' (kill the text up to the signature). C-c C-r `message-caesar-buffer-body' (rot13 the message body). C-c C-a `mml-attach-file' (attach a file as MIME). C-c C-u `message-insert-or-toggle-importance' (insert or cycle importance). C-c M-n `message-insert-disposition-notification-to' (request receipt). C-c M-m `message-mark-inserted-region' (mark region with enclosing tags). C-c M-f `message-mark-insert-file' (insert file marked with enclosing tags). M-RET `message-newline-and-reformat' (break the line and reformat). \(fn)" t nil) (autoload 'message-mail "message" "\ Start editing a mail message to be sent. OTHER-HEADERS is an alist of header/value pairs. CONTINUE says whether to continue editing a message already being composed. SWITCH-FUNCTION is a function used to switch to and display the mail buffer. \(fn &optional TO SUBJECT OTHER-HEADERS CONTINUE SWITCH-FUNCTION YANK-ACTION SEND-ACTIONS)" t nil) (autoload 'message-news "message" "\ Start editing a news article to be sent. \(fn &optional NEWSGROUPS SUBJECT)" t nil) (autoload 'message-reply "message" "\ Start editing a reply to the article in the current buffer. \(fn &optional TO-ADDRESS WIDE)" t nil) (autoload 'message-wide-reply "message" "\ Make a \"wide\" reply to the message in the current buffer. \(fn &optional TO-ADDRESS)" t nil) (autoload 'message-followup "message" "\ Follow up to the message in the current buffer. If TO-NEWSGROUPS, use that as the new Newsgroups line. \(fn &optional TO-NEWSGROUPS)" t nil) (autoload 'message-cancel-news "message" "\ Cancel an article you posted. If ARG, allow editing of the cancellation message. \(fn &optional ARG)" t nil) (autoload 'message-supersede "message" "\ Start composing a message to supersede the current message. This is done simply by taking the old article and adding a Supersedes header line with the old Message-ID. \(fn)" t nil) (autoload 'message-recover "message" "\ Reread contents of current buffer from its last auto-save file. \(fn)" t nil) (autoload 'message-forward "message" "\ Forward the current message via mail. Optional NEWS will use news to forward instead of mail. Optional DIGEST will use digest to forward. \(fn &optional NEWS DIGEST)" t nil) (autoload 'message-forward-make-body "message" "\ Not documented \(fn FORWARD-BUFFER &optional DIGEST)" nil nil) (autoload 'message-forward-rmail-make-body "message" "\ Not documented \(fn FORWARD-BUFFER)" nil nil) (autoload 'message-insinuate-rmail "message" "\ Let RMAIL use message to forward. \(fn)" t nil) (autoload 'message-resend "message" "\ Resend the current article to ADDRESS. \(fn ADDRESS)" t nil) (autoload 'message-bounce "message" "\ Re-mail the current message. This only makes sense if the current message is a bounce message that contains some mail you have written which has been bounced back to you. \(fn)" t nil) (autoload 'message-mail-other-window "message" "\ Like `message-mail' command, but display mail buffer in another window. \(fn &optional TO SUBJECT)" t nil) (autoload 'message-mail-other-frame "message" "\ Like `message-mail' command, but display mail buffer in another frame. \(fn &optional TO SUBJECT)" t nil) (autoload 'message-news-other-window "message" "\ Start editing a news article to be sent. \(fn &optional NEWSGROUPS SUBJECT)" t nil) (autoload 'message-news-other-frame "message" "\ Start editing a news article to be sent. \(fn &optional NEWSGROUPS SUBJECT)" t nil) (autoload 'message-bold-region "message" "\ Bold all nonblank characters in the region. Works by overstriking characters. Called from program, takes two arguments START and END which specify the range to operate on. \(fn START END)" t nil) (autoload 'message-unbold-region "message" "\ Remove all boldness (overstruck characters) in the region. Called from program, takes two arguments START and END which specify the range to operate on. \(fn START END)" t nil) ;;;*** ;;;### (autoloads (metapost-mode metafont-mode) "meta-mode" "progmodes/meta-mode.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from progmodes/meta-mode.el (autoload 'metafont-mode "meta-mode" "\ Major mode for editing Metafont sources. Special commands: \\{meta-mode-map} Turning on Metafont mode calls the value of the variables `meta-common-mode-hook' and `metafont-mode-hook'. \(fn)" t nil) (autoload 'metapost-mode "meta-mode" "\ Major mode for editing MetaPost sources. Special commands: \\{meta-mode-map} Turning on MetaPost mode calls the value of the variable `meta-common-mode-hook' and `metafont-mode-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (metamail-region metamail-buffer metamail-interpret-body ;;;;;; metamail-interpret-header) "metamail" "mail/metamail.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from mail/metamail.el (autoload 'metamail-interpret-header "metamail" "\ Interpret a header part of a MIME message in current buffer. Its body part is not interpreted at all. \(fn)" t nil) (autoload 'metamail-interpret-body "metamail" "\ Interpret a body part of a MIME message in current buffer. Optional argument VIEWMODE specifies the value of the EMACS_VIEW_MODE environment variable (defaulted to 1). Optional argument NODISPLAY non-nil means buffer is not redisplayed as output is inserted. Its header part is not interpreted at all. \(fn &optional VIEWMODE NODISPLAY)" t nil) (autoload 'metamail-buffer "metamail" "\ Process current buffer through `metamail'. Optional argument VIEWMODE specifies the value of the EMACS_VIEW_MODE environment variable (defaulted to 1). Optional argument BUFFER specifies a buffer to be filled (nil means current). Optional argument NODISPLAY non-nil means buffer is not redisplayed as output is inserted. \(fn &optional VIEWMODE BUFFER NODISPLAY)" t nil) (autoload 'metamail-region "metamail" "\ Process current region through 'metamail'. Optional argument VIEWMODE specifies the value of the EMACS_VIEW_MODE environment variable (defaulted to 1). Optional argument BUFFER specifies a buffer to be filled (nil means current). Optional argument NODISPLAY non-nil means buffer is not redisplayed as output is inserted. \(fn BEG END &optional VIEWMODE BUFFER NODISPLAY)" t nil) ;;;*** ;;;### (autoloads (mh-fully-kill-draft mh-send-letter mh-user-agent-compose ;;;;;; mh-smail-batch mh-smail-other-window mh-smail) "mh-comp" ;;;;;; "mh-e/mh-comp.el" (19259 35426)) ;;; Generated autoloads from mh-e/mh-comp.el (autoload 'mh-smail "mh-comp" "\ Compose a message with the MH mail system. See `mh-send' for more details on composing mail. \(fn)" t nil) (autoload 'mh-smail-other-window "mh-comp" "\ Compose a message with the MH mail system in other window. See `mh-send' for more details on composing mail. \(fn)" t nil) (autoload 'mh-smail-batch "mh-comp" "\ Compose a message with the MH mail system. This function does not prompt the user for any header fields, and thus is suitable for use by programs that want to create a mail buffer. Users should use \\[mh-smail] to compose mail. Optional arguments for setting certain fields include TO, SUBJECT, and OTHER-HEADERS. Additional arguments are IGNORED. This function remains for Emacs 21 compatibility. New applications should use `mh-user-agent-compose'. \(fn &optional TO SUBJECT OTHER-HEADERS &rest IGNORED)" nil nil) (define-mail-user-agent 'mh-e-user-agent 'mh-user-agent-compose 'mh-send-letter 'mh-fully-kill-draft 'mh-before-send-letter-hook) (autoload 'mh-user-agent-compose "mh-comp" "\ Set up mail composition draft with the MH mail system. This is the `mail-user-agent' entry point to MH-E. This function conforms to the contract specified by `define-mail-user-agent' which means that this function should accept the same arguments as `compose-mail'. The optional arguments TO and SUBJECT specify recipients and the initial Subject field, respectively. OTHER-HEADERS is an alist specifying additional header fields. Elements look like (HEADER . VALUE) where both HEADER and VALUE are strings. CONTINUE, SWITCH-FUNCTION, YANK-ACTION and SEND-ACTIONS are ignored. \(fn &optional TO SUBJECT OTHER-HEADERS CONTINUE SWITCH-FUNCTION YANK-ACTION SEND-ACTIONS)" nil nil) (autoload 'mh-send-letter "mh-comp" "\ Save draft and send message. When you are all through editing a message, you send it with this command. You can give a prefix argument ARG to monitor the first stage of the delivery; this output can be found in a buffer called \"*MH-E Mail Delivery*\". The hook `mh-before-send-letter-hook' is run at the beginning of this command. For example, if you want to check your spelling in your message before sending, add the function `ispell-message'. Unless `mh-insert-auto-fields' had previously been called manually, the function `mh-insert-auto-fields' is called to insert fields based upon the recipients. If fields are added, you are given a chance to see and to confirm these fields before the message is actually sent. You can do away with this confirmation by turning off the option `mh-auto-fields-prompt-flag'. In case the MH \"send\" program is installed under a different name, use `mh-send-prog' to tell MH-E the name. The hook `mh-annotate-msg-hook' is run after annotating the message and scan line. \(fn &optional ARG)" t nil) (autoload 'mh-fully-kill-draft "mh-comp" "\ Quit editing and delete draft message. If for some reason you are not happy with the draft, you can use this command to kill the draft buffer and delete the draft message. Use the command \\[kill-buffer] if you don't want to delete the draft message. \(fn)" t nil) ;;;*** ;;;### (autoloads (mh-version) "mh-e" "mh-e/mh-e.el" (19259 35425)) ;;; Generated autoloads from mh-e/mh-e.el (put 'mh-progs 'risky-local-variable t) (put 'mh-lib 'risky-local-variable t) (put 'mh-lib-progs 'risky-local-variable t) (autoload 'mh-version "mh-e" "\ Display version information about MH-E and the MH mail handling system. \(fn)" t nil) ;;;*** ;;;### (autoloads (mh-folder-mode mh-nmail mh-rmail) "mh-folder" ;;;;;; "mh-e/mh-folder.el" (19259 35426)) ;;; Generated autoloads from mh-e/mh-folder.el (autoload 'mh-rmail "mh-folder" "\ Incorporate new mail with MH. Scan an MH folder if ARG is non-nil. This function is an entry point to MH-E, the Emacs interface to the MH mail system. \(fn &optional ARG)" t nil) (autoload 'mh-nmail "mh-folder" "\ Check for new mail in inbox folder. Scan an MH folder if ARG is non-nil. This function is an entry point to MH-E, the Emacs interface to the MH mail system. \(fn &optional ARG)" t nil) (autoload 'mh-folder-mode "mh-folder" "\ Major MH-E mode for \"editing\" an MH folder scan listing.\\<mh-folder-mode-map> You can show the message the cursor is pointing to, and step through the messages. Messages can be marked for deletion or refiling into another folder; these commands are executed all at once with a separate command. Options that control this mode can be changed with \\[customize-group]; specify the \"mh\" group. In particular, please see the `mh-scan-format-file' option if you wish to modify scan's format. When a folder is visited, the hook `mh-folder-mode-hook' is run. Ranges ====== Many commands that operate on individual messages, such as `mh-forward' or `mh-refile-msg' take a RANGE argument. This argument can be used in several ways. If you provide the prefix argument (\\[universal-argument]) to these commands, then you will be prompted for the message range. This can be any valid MH range which can include messages, sequences, and the abbreviations (described in the mh(1) man page): <num1>-<num2> Indicates all messages in the range <num1> to <num2>, inclusive. The range must be nonempty. <num>:N <num>:+N <num>:-N Up to N messages beginning with (or ending with) message num. Num may be any of the predefined symbols: first, prev, cur, next or last. first:N prev:N next:N last:N The first, previous, next or last messages, if they exist. all All of the messages. For example, a range that shows all of these things is `1 2 3 5-10 last:5 unseen'. If the option `transient-mark-mode' is set to t and you set a region in the MH-Folder buffer, then the MH-E command will perform the operation on all messages in that region. \\{mh-folder-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (midnight-delay-set clean-buffer-list) "midnight" ;;;;;; "midnight.el" (19259 35426)) ;;; Generated autoloads from midnight.el (autoload 'clean-buffer-list "midnight" "\ Kill old buffers that have not been displayed recently. The relevant variables are `clean-buffer-list-delay-general', `clean-buffer-list-delay-special', `clean-buffer-list-kill-buffer-names', `clean-buffer-list-kill-never-buffer-names', `clean-buffer-list-kill-regexps' and `clean-buffer-list-kill-never-regexps'. While processing buffers, this procedure displays messages containing the current date/time, buffer name, how many seconds ago it was displayed (can be nil if the buffer was never displayed) and its lifetime, i.e., its \"age\" when it will be purged. \(fn)" t nil) (autoload 'midnight-delay-set "midnight" "\ Modify `midnight-timer' according to `midnight-delay'. Sets the first argument SYMB (which must be symbol `midnight-delay') to its second argument TM. \(fn SYMB TM)" nil nil) ;;;*** ;;;### (autoloads (minibuffer-electric-default-mode) "minibuf-eldef" ;;;;;; "minibuf-eldef.el" (19259 35426)) ;;; Generated autoloads from minibuf-eldef.el (defvar minibuffer-electric-default-mode nil "\ Non-nil if Minibuffer-Electric-Default mode is enabled. See the command `minibuffer-electric-default-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `minibuffer-electric-default-mode'.") (custom-autoload 'minibuffer-electric-default-mode "minibuf-eldef" nil) (autoload 'minibuffer-electric-default-mode "minibuf-eldef" "\ Toggle Minibuffer Electric Default mode. When active, minibuffer prompts that show a default value only show the default when it's applicable -- that is, when hitting RET would yield the default value. If the user modifies the input such that hitting RET would enter a non-default value, the prompt is modified to remove the default indication. With prefix argument ARG, turn on if positive, otherwise off. Returns non-nil if the new state is enabled. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (butterfly) "misc" "misc.el" (19259 35426)) ;;; Generated autoloads from misc.el (autoload 'butterfly "misc" "\ Use butterflies to flip the desired bit on the drive platter. Open hands and let the delicate wings flap once. The disturbance ripples outward, changing the flow of the eddy currents in the upper atmosphere. These cause momentary pockets of higher-pressure air to form, which act as lenses that deflect incoming cosmic rays, focusing them to strike the drive platter and flip the desired bit. You can type `M-x butterfly C-M-c' to run it. This is a permuted variation of `C-x M-c M-butterfly' from url `http://xkcd.com/378/'. \(fn)" t nil) ;;;*** ;;;### (autoloads (multi-isearch-files-regexp multi-isearch-files ;;;;;; multi-isearch-buffers-regexp multi-isearch-buffers multi-isearch-setup) ;;;;;; "misearch" "misearch.el" (19259 35426)) ;;; Generated autoloads from misearch.el (add-hook 'isearch-mode-hook 'multi-isearch-setup) (defvar multi-isearch-next-buffer-function nil "\ Function to call to get the next buffer to search. When this variable is set to a function that returns a buffer, then after typing another \\[isearch-forward] or \\[isearch-backward] at a failing search, the search goes to the next buffer in the series and continues searching for the next occurrence. This function should return the next buffer (it doesn't need to switch to it), or nil if it can't find the next buffer (when it reaches the end of the search space). The first argument of this function is the current buffer where the search is currently searching. It defines the base buffer relative to which this function should find the next buffer. When the isearch direction is backward (when `isearch-forward' is nil), this function should return the previous buffer to search. If the second argument of this function WRAP is non-nil, then it should return the first buffer in the series; and for the backward search, it should return the last buffer in the series.") (defvar multi-isearch-next-buffer-current-function nil "\ The currently active function to get the next buffer to search. Initialized from `multi-isearch-next-buffer-function' when Isearch starts.") (defvar multi-isearch-current-buffer nil "\ The buffer where the search is currently searching. The value is nil when the search still is in the initial buffer.") (autoload 'multi-isearch-setup "misearch" "\ Set up isearch to search multiple buffers. Intended to be added to `isearch-mode-hook'. \(fn)" nil nil) (autoload 'multi-isearch-buffers "misearch" "\ Start multi-buffer Isearch on a list of BUFFERS. This list can contain live buffers or their names. Interactively read buffer names to search, one by one, ended with RET. With a prefix argument, ask for a regexp, and search in buffers whose names match the specified regexp. \(fn BUFFERS)" t nil) (autoload 'multi-isearch-buffers-regexp "misearch" "\ Start multi-buffer regexp Isearch on a list of BUFFERS. This list can contain live buffers or their names. Interactively read buffer names to search, one by one, ended with RET. With a prefix argument, ask for a regexp, and search in buffers whose names match the specified regexp. \(fn BUFFERS)" t nil) (autoload 'multi-isearch-files "misearch" "\ Start multi-buffer Isearch on a list of FILES. Relative file names in this list are expanded to absolute file names using the current buffer's value of `default-directory'. Interactively read file names to search, one by one, ended with RET. With a prefix argument, ask for a wildcard, and search in file buffers whose file names match the specified wildcard. \(fn FILES)" t nil) (autoload 'multi-isearch-files-regexp "misearch" "\ Start multi-buffer regexp Isearch on a list of FILES. Relative file names in this list are expanded to absolute file names using the current buffer's value of `default-directory'. Interactively read file names to search, one by one, ended with RET. With a prefix argument, ask for a wildcard, and search in file buffers whose file names match the specified wildcard. \(fn FILES)" t nil) ;;;*** ;;;### (autoloads (mixal-mode) "mixal-mode" "progmodes/mixal-mode.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from progmodes/mixal-mode.el (autoload 'mixal-mode "mixal-mode" "\ Major mode for the mixal asm language. \\{mixal-mode-map} \(fn)" t nil) (add-to-list 'auto-mode-alist '("\\.mixal\\'" . mixal-mode)) ;;;*** ;;;### (autoloads (mm-inline-external-body mm-extern-cache-contents) ;;;;;; "mm-extern" "gnus/mm-extern.el" (19259 35426)) ;;; Generated autoloads from gnus/mm-extern.el (autoload 'mm-extern-cache-contents "mm-extern" "\ Put the external-body part of HANDLE into its cache. \(fn HANDLE)" nil nil) (autoload 'mm-inline-external-body "mm-extern" "\ Show the external-body part of HANDLE. This function replaces the buffer of HANDLE with a buffer contains the entire message. If NO-DISPLAY is nil, display it. Otherwise, do nothing after replacing. \(fn HANDLE &optional NO-DISPLAY)" nil nil) ;;;*** ;;;### (autoloads (mm-inline-partial) "mm-partial" "gnus/mm-partial.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from gnus/mm-partial.el (autoload 'mm-inline-partial "mm-partial" "\ Show the partial part of HANDLE. This function replaces the buffer of HANDLE with a buffer contains the entire message. If NO-DISPLAY is nil, display it. Otherwise, do nothing after replacing. \(fn HANDLE &optional NO-DISPLAY)" nil nil) ;;;*** ;;;### (autoloads (mm-url-insert-file-contents-external mm-url-insert-file-contents) ;;;;;; "mm-url" "gnus/mm-url.el" (19259 35426)) ;;; Generated autoloads from gnus/mm-url.el (autoload 'mm-url-insert-file-contents "mm-url" "\ Insert file contents of URL. If `mm-url-use-external' is non-nil, use `mm-url-program'. \(fn URL)" nil nil) (autoload 'mm-url-insert-file-contents-external "mm-url" "\ Insert file contents of URL using `mm-url-program'. \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (mm-uu-dissect-text-parts mm-uu-dissect) "mm-uu" ;;;;;; "gnus/mm-uu.el" (19259 35426)) ;;; Generated autoloads from gnus/mm-uu.el (autoload 'mm-uu-dissect "mm-uu" "\ Dissect the current buffer and return a list of uu handles. The optional NOHEADER means there's no header in the buffer. MIME-TYPE specifies a MIME type and parameters, which defaults to the value of `mm-uu-text-plain-type'. \(fn &optional NOHEADER MIME-TYPE)" nil nil) (autoload 'mm-uu-dissect-text-parts "mm-uu" "\ Dissect text parts and put uu handles into HANDLE. Assume text has been decoded if DECODED is non-nil. \(fn HANDLE &optional DECODED)" nil nil) ;;;*** ;;;### (autoloads (mml1991-sign mml1991-encrypt) "mml1991" "gnus/mml1991.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from gnus/mml1991.el (autoload 'mml1991-encrypt "mml1991" "\ Not documented \(fn CONT &optional SIGN)" nil nil) (autoload 'mml1991-sign "mml1991" "\ Not documented \(fn CONT)" nil nil) ;;;*** ;;;### (autoloads (mml2015-self-encrypt mml2015-sign mml2015-encrypt ;;;;;; mml2015-verify-test mml2015-verify mml2015-decrypt-test mml2015-decrypt) ;;;;;; "mml2015" "gnus/mml2015.el" (19259 35426)) ;;; Generated autoloads from gnus/mml2015.el (autoload 'mml2015-decrypt "mml2015" "\ Not documented \(fn HANDLE CTL)" nil nil) (autoload 'mml2015-decrypt-test "mml2015" "\ Not documented \(fn HANDLE CTL)" nil nil) (autoload 'mml2015-verify "mml2015" "\ Not documented \(fn HANDLE CTL)" nil nil) (autoload 'mml2015-verify-test "mml2015" "\ Not documented \(fn HANDLE CTL)" nil nil) (autoload 'mml2015-encrypt "mml2015" "\ Not documented \(fn CONT &optional SIGN)" nil nil) (autoload 'mml2015-sign "mml2015" "\ Not documented \(fn CONT)" nil nil) (autoload 'mml2015-self-encrypt "mml2015" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads (modula-2-mode) "modula2" "progmodes/modula2.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from progmodes/modula2.el (autoload 'modula-2-mode "modula2" "\ This is a mode intended to support program development in Modula-2. All control constructs of Modula-2 can be reached by typing C-c followed by the first character of the construct. \\<m2-mode-map> \\[m2-begin] begin \\[m2-case] case \\[m2-definition] definition \\[m2-else] else \\[m2-for] for \\[m2-header] header \\[m2-if] if \\[m2-module] module \\[m2-loop] loop \\[m2-or] or \\[m2-procedure] procedure Control-c Control-w with \\[m2-record] record \\[m2-stdio] stdio \\[m2-type] type \\[m2-until] until \\[m2-var] var \\[m2-while] while \\[m2-export] export \\[m2-import] import \\[m2-begin-comment] begin-comment \\[m2-end-comment] end-comment \\[suspend-emacs] suspend Emacs \\[m2-toggle] toggle \\[m2-compile] compile \\[m2-next-error] next-error \\[m2-link] link `m2-indent' controls the number of spaces for each indentation. `m2-compile-command' holds the command to compile a Modula-2 program. `m2-link-command' holds the command to link a Modula-2 program. \(fn)" t nil) ;;;*** ;;;### (autoloads (unmorse-region morse-region) "morse" "play/morse.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from play/morse.el (autoload 'morse-region "morse" "\ Convert all text in a given region to morse code. \(fn BEG END)" t nil) (autoload 'unmorse-region "morse" "\ Convert morse coded text in region to ordinary ASCII text. \(fn BEG END)" t nil) ;;;*** ;;;### (autoloads (mouse-drag-drag mouse-drag-throw) "mouse-drag" ;;;;;; "mouse-drag.el" (19259 35426)) ;;; Generated autoloads from mouse-drag.el (autoload 'mouse-drag-throw "mouse-drag" "\ \"Throw\" the page according to a mouse drag. A \"throw\" is scrolling the page at a speed relative to the distance from the original mouse click to the current mouse location. Try it; you'll like it. It's easier to observe than to explain. If the mouse is clicked and released in the same place of time we assume that the user didn't want to scdebugroll but wanted to whatever mouse-2 used to do, so we pass it through. Throw scrolling was inspired (but is not identical to) the \"hand\" option in MacPaint, or the middle button in Tk text widgets. If `mouse-throw-with-scroll-bar' is non-nil, then this command scrolls in the opposite direction. (Different people have different ideas about which direction is natural. Perhaps it has to do with which hemisphere you're in.) To test this function, evaluate: (global-set-key [down-mouse-2] 'mouse-drag-throw) \(fn START-EVENT)" t nil) (autoload 'mouse-drag-drag "mouse-drag" "\ \"Drag\" the page according to a mouse drag. Drag scrolling moves the page according to the movement of the mouse. You \"grab\" the character under the mouse and move it around. If the mouse is clicked and released in the same place of time we assume that the user didn't want to scroll but wanted to whatever mouse-2 used to do, so we pass it through. Drag scrolling is identical to the \"hand\" option in MacPaint, or the middle button in Tk text widgets. To test this function, evaluate: (global-set-key [down-mouse-2] 'mouse-drag-drag) \(fn START-EVENT)" t nil) ;;;*** ;;;### (autoloads (mouse-sel-mode) "mouse-sel" "mouse-sel.el" (19259 ;;;;;; 35426)) ;;; Generated autoloads from mouse-sel.el (defvar mouse-sel-mode nil "\ Non-nil if Mouse-Sel mode is enabled. See the command `mouse-sel-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `mouse-sel-mode'.") (custom-autoload 'mouse-sel-mode "mouse-sel" nil) (autoload 'mouse-sel-mode "mouse-sel" "\ Toggle Mouse Sel mode. With prefix ARG, turn Mouse Sel mode on if and only if ARG is positive. Returns the new status of Mouse Sel mode (non-nil means on). When Mouse Sel mode is enabled, mouse selection is enhanced in various ways: - Clicking mouse-1 starts (cancels) selection, dragging extends it. - Clicking or dragging mouse-3 extends the selection as well. - Double-clicking on word constituents selects words. Double-clicking on symbol constituents selects symbols. Double-clicking on quotes or parentheses selects sexps. Double-clicking on whitespace selects whitespace. Triple-clicking selects lines. Quad-clicking selects paragraphs. - Selecting sets the region & X primary selection, but does NOT affect the `kill-ring', nor do the kill-ring functions change the X selection. Because the mouse handlers set the primary selection directly, mouse-sel sets the variables `interprogram-cut-function' and `interprogram-paste-function' to nil. - Clicking mouse-2 inserts the contents of the primary selection at the mouse position (or point, if `mouse-yank-at-point' is non-nil). - Pressing mouse-2 while selecting or extending copies selection to the kill ring. Pressing mouse-1 or mouse-3 kills it. - Double-clicking mouse-3 also kills selection. - M-mouse-1, M-mouse-2 & M-mouse-3 work similarly to mouse-1, mouse-2 & mouse-3, but operate on the X secondary selection rather than the primary selection and region. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (mpc) "mpc" "mpc.el" (19259 35426)) ;;; Generated autoloads from mpc.el (autoload 'mpc "mpc" "\ Main entry point for MPC. \(fn)" t nil) ;;;*** ;;;### (autoloads (mpuz) "mpuz" "play/mpuz.el" (19259 35426)) ;;; Generated autoloads from play/mpuz.el (autoload 'mpuz "mpuz" "\ Multiplication puzzle with GNU Emacs. \(fn)" t nil) ;;;*** ;;;### (autoloads (msb-mode) "msb" "msb.el" (19259 35426)) ;;; Generated autoloads from msb.el (defvar msb-mode nil "\ Non-nil if Msb mode is enabled. See the command `msb-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `msb-mode'.") (custom-autoload 'msb-mode "msb" nil) (autoload 'msb-mode "msb" "\ Toggle Msb mode. With arg, turn Msb mode on if and only if arg is positive. This mode overrides the binding(s) of `mouse-buffer-menu' to provide a different buffer menu using the function `msb'. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (font-show-log mule-diag list-input-methods list-fontsets ;;;;;; describe-fontset describe-font list-coding-categories list-coding-systems ;;;;;; describe-current-coding-system describe-current-coding-system-briefly ;;;;;; describe-coding-system describe-character-set list-charset-chars ;;;;;; read-charset list-character-sets) "mule-diag" "international/mule-diag.el" ;;;;;; (19259 35426)) ;;; Generated autoloads from international/mule-diag.el (autoload 'list-character-sets "mule-diag" "\ Display a list of all character sets. The D column contains the dimension of this character set. The CH column contains the number of characters in a block of this character set. The FINAL-BYTE column contains an ISO-2022 <final-byte> to use in the designation escape sequence for this character set in ISO-2022-based coding systems. With prefix ARG, the output format gets more cryptic, but still shows the full information. \(fn ARG)" t nil) (autoload 'read-charset "mule-diag" "\ Read a character set from the minibuffer, prompting with string PROMPT. It must be an Emacs character set listed in the variable `charset-list'. Optional arguments are DEFAULT-VALUE and INITIAL-INPUT. DEFAULT-VALUE, if non-nil, is the default value. INITIAL-INPUT, if non-nil, is a string inserted in the minibuffer initially. See the documentation of the function `completing-read' for the detailed meanings of these arguments. \(fn PROMPT &optional DEFAULT-VALUE INITIAL-INPUT)" nil nil) (autoload 'list-charset-chars "mule-diag" "\ Display a list of characters in character set CHARSET. \(fn CHARSET)" t nil) (autoload 'describe-character-set "mule-diag" "\ Display information about built-in character set CHARSET. \(fn CHARSET)" t nil) (autoload 'describe-coding-system "mule-diag" "\ Display information about CODING-SYSTEM. \(fn CODING-SYSTEM)" t nil) (autoload 'describe-current-coding-system-briefly "mule-diag" "\ Display coding systems currently used in a brief format in echo area. The format is \"F[..],K[..],T[..],P>[..],P<[..], default F[..],P<[..],P<[..]\", where mnemonics of the following coding systems come in this order in place of `..': `buffer-file-coding-system' (of the current buffer) eol-type of `buffer-file-coding-system' (of the current buffer) Value returned by `keyboard-coding-system' eol-type of `keyboard-coding-system' Value returned by `terminal-coding-system'. eol-type of `terminal-coding-system' `process-coding-system' for read (of the current buffer, if any) eol-type of `process-coding-system' for read (of the current buffer, if any) `process-coding-system' for write (of the current buffer, if any) eol-type of `process-coding-system' for write (of the current buffer, if any) default `buffer-file-coding-system' eol-type of default `buffer-file-coding-system' `default-process-coding-system' for read eol-type of `default-process-coding-system' for read `default-process-coding-system' for write eol-type of `default-process-coding-system' \(fn)" t nil) (autoload 'describe-current-coding-system "mule-diag" "\ Display coding systems currently used, in detail. \(fn)" t nil) (autoload 'list-coding-systems "mule-diag" "\ Display a list of all coding systems. This shows the mnemonic letter, name, and description of each coding system. With prefix ARG, the output format gets more cryptic, but still contains full information about each coding system. \(fn &optional ARG)" t nil) (autoload 'list-coding-categories "mule-diag" "\ Display a list of all coding categories. \(fn)" nil nil) (autoload 'describe-font "mule-diag" "\ Display information about a font whose name is FONTNAME. The font must be already used by Emacs. \(fn FONTNAME)" t nil) (autoload 'describe-fontset "mule-diag" "\ Display information about FONTSET. This shows which font is used for which character(s). \(fn FONTSET)" t nil) (autoload 'list-fontsets "mule-diag" "\ Display a list of all fontsets. This shows the name, size, and style of each fontset. With prefix arg, also list the fonts contained in each fontset; see the function `describe-fontset' for the format of the list. \(fn ARG)" t nil) (autoload 'list-input-methods "mule-diag" "\ Display information about all input methods. \(fn)" t nil) (autoload 'mule-diag "mule-diag" "\ Display diagnosis of the multilingual environment (Mule). This shows various information related to the current multilingual environment, including lists of input methods, coding systems, character sets, and fontsets (if Emacs is running under a window system which uses fontsets). \(fn)" t nil) (autoload 'font-show-log "mule-diag" "\ Show log of font listing and opening. Prefix arg LIMIT says how many fonts to show for each listing. The default is 20. If LIMIT is negative, do not limit the listing. \(fn &optional LIMIT)" t nil) ;;;*** ;;;### (autoloads (char-displayable-p detect-coding-with-language-environment ;;;;;; detect-coding-with-priority with-coding-priority coding-system-translation-table-for-encode ;;;;;; coding-system-translation-table-for-decode coding-system-pre-write-conversion ;;;;;; coding-system-post-read-conversion lookup-nested-alist set-nested-alist ;;;;;; truncate-string-to-width store-substring string-to-sequence) ;;;;;; "mule-util" "international/mule-util.el" (19259 35426)) ;;; Generated autoloads from international/mule-util.el (autoload 'string-to-sequence "mule-util" "\ Convert STRING to a sequence of TYPE which contains characters in STRING. TYPE should be `list' or `vector'. \(fn STRING TYPE)" nil nil) (make-obsolete 'string-to-sequence "use `string-to-list' or `string-to-vector'." "22.1") (defsubst string-to-list (string) "\ Return a list of characters in STRING." (append string nil)) (defsubst string-to-vector (string) "\ Return a vector of characters in STRING." (vconcat string)) (autoload 'store-substring "mule-util" "\ Embed OBJ (string or character) at index IDX of STRING. \(fn STRING IDX OBJ)" nil nil) (autoload 'truncate-string-to-width "mule-util" "\ Truncate string STR to end at column END-COLUMN. The optional 3rd arg START-COLUMN, if non-nil, specifies the starting column; that means to return the characters occupying columns START-COLUMN ... END-COLUMN of STR. Both END-COLUMN and START-COLUMN are specified in terms of character display width in the current buffer; see also `char-width'. The optional 4th arg PADDING, if non-nil, specifies a padding character (which should have a display width of 1) to add at the end of the result if STR doesn't reach column END-COLUMN, or if END-COLUMN comes in the middle of a character in STR. PADDING is also added at the beginning of the result if column START-COLUMN appears in the middle of a character in STR. If PADDING is nil, no padding is added in these cases, so the resulting string may be narrower than END-COLUMN. If ELLIPSIS is non-nil, it should be a string which will replace the end of STR (including any padding) if it extends beyond END-COLUMN, unless the display width of STR is equal to or less than the display width of ELLIPSIS. If it is non-nil and not a string, then ELLIPSIS defaults to \"...\". \(fn STR END-COLUMN &optional START-COLUMN PADDING ELLIPSIS)" nil nil) (defsubst nested-alist-p (obj) "\ Return t if OBJ is a nested alist. Nested alist is a list of the form (ENTRY . BRANCHES), where ENTRY is any Lisp object, and BRANCHES is a list of cons cells of the form \(KEY-ELEMENT . NESTED-ALIST). You can use a nested alist to store any Lisp object (ENTRY) for a key sequence KEYSEQ, where KEYSEQ is a sequence of KEY-ELEMENT. KEYSEQ can be a string, a vector, or a list." (and obj (listp obj) (listp (cdr obj)))) (autoload 'set-nested-alist "mule-util" "\ Set ENTRY for KEYSEQ in a nested alist ALIST. Optional 4th arg LEN non-nil means the first LEN elements in KEYSEQ are considered. Optional 5th argument BRANCHES if non-nil is branches for a keyseq longer than KEYSEQ. See the documentation of `nested-alist-p' for more detail. \(fn KEYSEQ ENTRY ALIST &optional LEN BRANCHES)" nil nil) (autoload 'lookup-nested-alist "mule-util" "\ Look up key sequence KEYSEQ in nested alist ALIST. Return the definition. Optional 3rd argument LEN specifies the length of KEYSEQ. Optional 4th argument START specifies index of the starting key. The returned value is normally a nested alist of which car part is the entry for KEYSEQ. If ALIST is not deep enough for KEYSEQ, return number which is how many key elements at the front of KEYSEQ it takes to reach a leaf in ALIST. Optional 5th argument NIL-FOR-TOO-LONG non-nil means return nil even if ALIST is not deep enough. \(fn KEYSEQ ALIST &optional LEN START NIL-FOR-TOO-LONG)" nil nil) (autoload 'coding-system-post-read-conversion "mule-util" "\ Return the value of CODING-SYSTEM's `post-read-conversion' property. \(fn CODING-SYSTEM)" nil nil) (autoload 'coding-system-pre-write-conversion "mule-util" "\ Return the value of CODING-SYSTEM's `pre-write-conversion' property. \(fn CODING-SYSTEM)" nil nil) (autoload 'coding-system-translation-table-for-decode "mule-util" "\ Return the value of CODING-SYSTEM's `decode-translation-table' property. \(fn CODING-SYSTEM)" nil nil) (autoload 'coding-system-translation-table-for-encode "mule-util" "\ Return the value of CODING-SYSTEM's `encode-translation-table' property. \(fn CODING-SYSTEM)" nil nil) (autoload 'with-coding-priority "mule-util" "\ Execute BODY like `progn' with CODING-SYSTEMS at the front of priority list. CODING-SYSTEMS is a list of coding systems. See `set-coding-priority'. This affects the implicit sorting of lists of coding sysems returned by operations such as `find-coding-systems-region'. \(fn CODING-SYSTEMS &rest BODY)" nil (quote macro)) (autoload 'detect-coding-with-priority "mule-util" "\ Detect a coding system of the text between FROM and TO with PRIORITY-LIST. PRIORITY-LIST is an alist of coding categories vs the corresponding coding systems ordered by priority. \(fn FROM TO PRIORITY-LIST)" nil (quote macro)) (autoload 'detect-coding-with-language-environment "mule-util" "\ Detect a coding system for the text between FROM and TO with LANG-ENV. The detection takes into account the coding system priorities for the language environment LANG-ENV. \(fn FROM TO LANG-ENV)" nil nil) (autoload 'char-displayable-p "mule-util" "\ Return non-nil if we should be able to display CHAR. On a multi-font display, the test is only whether there is an appropriate font from the selected frame's fontset to display CHAR's charset in general. Since fonts may be specified on a per-character basis, this may not be accurate. \(fn CHAR)" nil nil) ;;;*** ;;;### (autoloads (network-connection network-connection-to-service ;;;;;; whois-reverse-lookup whois finger ftp run-dig dns-lookup-host ;;;;;; nslookup nslookup-host ping traceroute route arp netstat ;;;;;; iwconfig ifconfig) "net-utils" "net/net-utils.el" (19259 ;;;;;; 35426)) ;;; Generated autoloads from net/net-utils.el (autoload 'ifconfig "net-utils" "\ Run ifconfig and display diagnostic output. \(fn)" t nil) (autoload 'iwconfig "net-utils" "\ Run iwconfig and display diagnostic output. \(fn)" t nil) (autoload 'netstat "net-utils" "\ Run netstat and display diagnostic output. \(fn)" t nil) (autoload 'arp "net-utils" "\ Run arp and display diagnostic output. \(fn)" t nil) (autoload 'route "net-utils" "\ Run route and display diagnostic output. \(fn)" t nil) (autoload 'traceroute "net-utils" "\ Run traceroute program for TARGET. \(fn TARGET)" t nil) (autoload 'ping "net-utils" "\ Ping HOST. If your system's ping continues until interrupted, you can try setting `ping-program-options'. \(fn HOST)" t nil) (autoload 'nslookup-host "net-utils" "\ Lookup the DNS information for HOST. \(fn HOST)" t nil) (autoload 'nslookup "net-utils" "\ Run nslookup program. \(fn)" t nil) (autoload 'dns-lookup-host "net-utils" "\ Lookup the DNS information for HOST (name or IP address). \(fn HOST)" t nil) (autoload 'run-dig "net-utils" "\ Run dig program. \(fn HOST)" t nil) (autoload 'ftp "net-utils" "\ Run ftp program. \(fn HOST)" t nil) (autoload 'finger "net-utils" "\ Finger USER on HOST. \(fn USER HOST)" t nil) (autoload 'whois "net-utils" "\ Send SEARCH-STRING to server defined by the `whois-server-name' variable. If `whois-guess-server' is non-nil, then try to deduce the correct server from SEARCH-STRING. With argument, prompt for whois server. \(fn ARG SEARCH-STRING)" t nil) (autoload 'whois-reverse-lookup "net-utils" "\ Not documented \(fn)" t nil) (autoload 'network-connection-to-service "net-utils" "\ Open a network connection to SERVICE on HOST. \(fn HOST SERVICE)" t nil) (autoload 'network-connection "net-utils" "\ Open a network connection to HOST on PORT. \(fn HOST PORT)" t nil) ;;;*** ;;;### (autoloads (comment-indent-new-line comment-auto-fill-only-comments ;;;;;; comment-dwim comment-or-uncomment-region comment-box comment-region ;;;;;; uncomment-region comment-kill comment-set-column comment-indent ;;;;;; comment-indent-default comment-normalize-vars comment-multi-line ;;;;;; comment-padding comment-style comment-column) "newcomment" ;;;;;; "newcomment.el" (19259 35426)) ;;; Generated autoloads from newcomment.el (defalias 'indent-for-comment 'comment-indent) (defalias 'set-comment-column 'comment-set-column) (defalias 'kill-comment 'comment-kill) (defalias 'indent-new-comment-line 'comment-indent-new-line) (defvar comment-use-syntax 'undecided "\ Non-nil if syntax-tables can be used instead of regexps. Can also be `undecided' which means that a somewhat expensive test will be used to try to determine whether syntax-tables should be trusted to understand comments or not in the given buffer. Major modes should set this variable.") (defvar comment-column 32 "\ Column to indent right-margin comments to. Each mode may establish a different default value for this variable; you can set the value for a particular mode using that mode's hook. Comments might be indented to a different value in order not to go beyond `comment-fill-column' or in order to align them with surrounding comments.") (custom-autoload 'comment-column "newcomment" t) (put 'comment-column 'safe-local-variable 'integerp) (defvar comment-start nil "\ *String to insert to start a new comment, or nil if no comment syntax.") (put 'comment-start 'safe-local-variable 'string-or-null-p) (defvar comment-start-skip nil "\ *Regexp to match the start of a comment plus everything up to its body. If there are any \\(...\\) pairs, the comment delimiter text is held to begin at the place matched by the close of the first pair.") (put 'comment-start-skip 'safe-local-variable 'string-or-null-p) (defvar comment-end-skip nil "\ Regexp to match the end of a comment plus everything up to its body.") (put 'comment-end-skip 'safe-local-variable 'string-or-null-p) (defvar comment-end (purecopy "") "\ *String to insert to end a new comment. Should be an empty string if comments are terminated by end-of-line.") (put 'comment-end 'safe-local-variable 'string-or-null-p) (defvar comment-indent-function 'comment-indent-default "\ Function to compute desired indentation for a comment. This function is called with no args with point at the beginning of the comment's starting delimiter and should return either the desired column indentation or nil. If nil is returned, indentation is delegated to `indent-according-to-mode'.") (defvar comment-insert-comment-function nil "\ Function to insert a comment when a line doesn't contain one. The function has no args. Applicable at least in modes for languages like fixed-format Fortran where comments always start in column zero.") (defvar comment-style 'indent "\ Style to be used for `comment-region'. See `comment-styles' for a list of available styles.") (custom-autoload 'comment-style "newcomment" t) (defvar comment-padding (purecopy " ") "\ Padding string that `comment-region' puts between comment chars and text. Can also be an integer which will be automatically turned into a string of the corresponding number of spaces. Extra spacing between the comment characters and the comment text makes the comment easier to read. Default is 1. nil means 0.") (custom-autoload 'comment-padding "newcomment" t) (defvar comment-multi-line nil "\ Non-nil means `comment-indent-new-line' continues comments. That is, it inserts no new terminator or starter. This affects `auto-fill-mode', which is the main reason to customize this variable. It also affects \\[indent-new-comment-line]. However, if you want this behavior for explicit filling, you might as well use \\[newline-and-indent].") (custom-autoload 'comment-multi-line "newcomment" t) (autoload 'comment-normalize-vars "newcomment" "\ Check and setup the variables needed by other commenting functions. Functions autoloaded from newcomment.el, being entry points, should call this function before any other, so the rest of the code can assume that the variables are properly set. \(fn &optional NOERROR)" nil nil) (autoload 'comment-indent-default "newcomment" "\ Default for `comment-indent-function'. \(fn)" nil nil) (autoload 'comment-indent "newcomment" "\ Indent this line's comment to `comment-column', or insert an empty comment. If CONTINUE is non-nil, use the `comment-continue' markers if any. \(fn &optional CONTINUE)" t nil) (autoload 'comment-set-column "newcomment" "\ Set the comment column based on point. With no ARG, set the comment column to the current column. With just minus as arg, kill any comment on this line. With any other arg, set comment column to indentation of the previous comment and then align or create a comment on this line at that column. \(fn ARG)" t nil) (autoload 'comment-kill "newcomment" "\ Kill the first comment on this line, if any. With prefix ARG, kill comments on that many lines starting with this one. \(fn ARG)" t nil) (autoload 'uncomment-region "newcomment" "\ Uncomment each line in the BEG .. END region. The numeric prefix ARG can specify a number of chars to remove from the comment markers. \(fn BEG END &optional ARG)" t nil) (autoload 'comment-region "newcomment" "\ Comment or uncomment each line in the region. With just \\[universal-argument] prefix arg, uncomment each line in region BEG .. END. Numeric prefix ARG means use ARG comment characters. If ARG is negative, delete that many comment characters instead. The strings used as comment starts are built from `comment-start' and `comment-padding'; the strings used as comment ends are built from `comment-end' and `comment-padding'. By default, the `comment-start' markers are inserted at the current indentation of the region, and comments are terminated on each line (even for syntaxes in which newline does not end the comment and blank lines do not get comments). This can be changed with `comment-style'. \(fn BEG END &optional ARG)" t nil) (autoload 'comment-box "newcomment" "\ Comment out the BEG .. END region, putting it inside a box. The numeric prefix ARG specifies how many characters to add to begin- and end- comment markers additionally to what `comment-add' already specifies. \(fn BEG END &optional ARG)" t nil) (autoload 'comment-or-uncomment-region "newcomment" "\ Call `comment-region', unless the region only consists of comments, in which case call `uncomment-region'. If a prefix arg is given, it is passed on to the respective function. \(fn BEG END &optional ARG)" t nil) (autoload 'comment-dwim "newcomment" "\ Call the comment command you want (Do What I Mean). If the region is active and `transient-mark-mode' is on, call `comment-region' (unless it only consists of comments, in which case it calls `uncomment-region'). Else, if the current line is empty, call `comment-insert-comment-function' if it is defined, otherwise insert a comment and indent it. Else if a prefix ARG is specified, call `comment-kill'. Else, call `comment-indent'. You can configure `comment-style' to change the way regions are commented. \(fn ARG)" t nil) (defvar comment-auto-fill-only-comments nil "\ Non-nil means to only auto-fill inside comments. This has no effect in modes that do not define a comment syntax.") (custom-autoload 'comment-auto-fill-only-comments "newcomment" t) (autoload 'comment-indent-new-line "newcomment" "\ Break line at point and indent, continuing comment if within one. This indents the body of the continued comment under the previous comment line. This command is intended for styles where you write a comment per line, starting a new comment (and terminating it if necessary) on each line. If you want to continue one comment across several lines, use \\[newline-and-indent]. If a fill column is specified, it overrides the use of the comment column or comment indentation. The inserted newline is marked hard if variable `use-hard-newlines' is true, unless optional argument SOFT is non-nil. \(fn &optional SOFT)" t nil) ;;;*** ;;;### (autoloads (newsticker-start newsticker-running-p) "newst-backend" ;;;;;; "net/newst-backend.el" (19259 35427)) ;;; Generated autoloads from net/newst-backend.el (autoload 'newsticker-running-p "newst-backend" "\ Check whether newsticker is running. Return t if newsticker is running, nil otherwise. Newsticker is considered to be running if the newsticker timer list is not empty. \(fn)" nil nil) (autoload 'newsticker-start "newst-backend" "\ Start the newsticker. Start the timers for display and retrieval. If the newsticker, i.e. the timers, are running already a warning message is printed unless DO-NOT-COMPLAIN-IF-RUNNING is not nil. Run `newsticker-start-hook' if newsticker was not running already. \(fn &optional DO-NOT-COMPLAIN-IF-RUNNING)" t nil) ;;;*** ;;;### (autoloads (newsticker-plainview) "newst-plainview" "net/newst-plainview.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from net/newst-plainview.el (autoload 'newsticker-plainview "newst-plainview" "\ Start newsticker plainview. \(fn)" t nil) ;;;*** ;;;### (autoloads (newsticker-show-news) "newst-reader" "net/newst-reader.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from net/newst-reader.el (autoload 'newsticker-show-news "newst-reader" "\ Start reading news. You may want to bind this to a key. \(fn)" t nil) ;;;*** ;;;### (autoloads (newsticker-start-ticker newsticker-ticker-running-p) ;;;;;; "newst-ticker" "net/newst-ticker.el" (19259 35427)) ;;; Generated autoloads from net/newst-ticker.el (autoload 'newsticker-ticker-running-p "newst-ticker" "\ Check whether newsticker's actual ticker is running. Return t if ticker is running, nil otherwise. Newsticker is considered to be running if the newsticker timer list is not empty. \(fn)" nil nil) (autoload 'newsticker-start-ticker "newst-ticker" "\ Start newsticker's ticker (but not the news retrieval). Start display timer for the actual ticker if wanted and not running already. \(fn)" t nil) ;;;*** ;;;### (autoloads (newsticker-treeview) "newst-treeview" "net/newst-treeview.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from net/newst-treeview.el (autoload 'newsticker-treeview "newst-treeview" "\ Start newsticker treeview. \(fn)" t nil) ;;;*** ;;;### (autoloads (nndiary-generate-nov-databases) "nndiary" "gnus/nndiary.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from gnus/nndiary.el (autoload 'nndiary-generate-nov-databases "nndiary" "\ Generate NOV databases in all nndiary directories. \(fn &optional SERVER)" t nil) ;;;*** ;;;### (autoloads (nndoc-add-type) "nndoc" "gnus/nndoc.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from gnus/nndoc.el (autoload 'nndoc-add-type "nndoc" "\ Add document DEFINITION to the list of nndoc document definitions. If POSITION is nil or `last', the definition will be added as the last checked definition, if t or `first', add as the first definition, and if any other symbol, add after that symbol in the alist. \(fn DEFINITION &optional POSITION)" nil nil) ;;;*** ;;;### (autoloads (nnfolder-generate-active-file) "nnfolder" "gnus/nnfolder.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from gnus/nnfolder.el (autoload 'nnfolder-generate-active-file "nnfolder" "\ Look for mbox folders in the nnfolder directory and make them into groups. This command does not work if you use short group names. \(fn)" t nil) ;;;*** ;;;### (autoloads (nnkiboze-generate-groups) "nnkiboze" "gnus/nnkiboze.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from gnus/nnkiboze.el (autoload 'nnkiboze-generate-groups "nnkiboze" "\ \"Usage: emacs -batch -l nnkiboze -f nnkiboze-generate-groups\". Finds out what articles are to be part of the nnkiboze groups. \(fn)" t nil) ;;;*** ;;;### (autoloads (nnml-generate-nov-databases) "nnml" "gnus/nnml.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from gnus/nnml.el (autoload 'nnml-generate-nov-databases "nnml" "\ Generate NOV databases in all nnml directories. \(fn &optional SERVER)" t nil) ;;;*** ;;;### (autoloads (nnsoup-revert-variables nnsoup-set-variables nnsoup-pack-replies) ;;;;;; "nnsoup" "gnus/nnsoup.el" (19259 35427)) ;;; Generated autoloads from gnus/nnsoup.el (autoload 'nnsoup-pack-replies "nnsoup" "\ Make an outbound package of SOUP replies. \(fn)" t nil) (autoload 'nnsoup-set-variables "nnsoup" "\ Use the SOUP methods for posting news and mailing mail. \(fn)" t nil) (autoload 'nnsoup-revert-variables "nnsoup" "\ Revert posting and mailing methods to the standard Emacs methods. \(fn)" t nil) ;;;*** ;;;### (autoloads (disable-command enable-command disabled-command-function) ;;;;;; "novice" "novice.el" (19259 35427)) ;;; Generated autoloads from novice.el (defvar disabled-command-function 'disabled-command-function "\ Function to call to handle disabled commands. If nil, the feature is disabled, i.e., all commands work normally.") (define-obsolete-variable-alias 'disabled-command-hook 'disabled-command-function "22.1") (autoload 'disabled-command-function "novice" "\ Not documented \(fn &optional CMD KEYS)" nil nil) (autoload 'enable-command "novice" "\ Allow COMMAND to be executed without special confirmation from now on. COMMAND must be a symbol. This command alters the user's .emacs file so that this will apply to future sessions. \(fn COMMAND)" t nil) (autoload 'disable-command "novice" "\ Require special confirmation to execute COMMAND from now on. COMMAND must be a symbol. This command alters the user's .emacs file so that this will apply to future sessions. \(fn COMMAND)" t nil) ;;;*** ;;;### (autoloads (nroff-mode) "nroff-mode" "textmodes/nroff-mode.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from textmodes/nroff-mode.el (autoload 'nroff-mode "nroff-mode" "\ Major mode for editing text intended for nroff to format. \\{nroff-mode-map} Turning on Nroff mode runs `text-mode-hook', then `nroff-mode-hook'. Also, try `nroff-electric-mode', for automatically inserting closing requests for requests that are used in matched pairs. \(fn)" t nil) ;;;*** ;;;### (autoloads (nxml-glyph-display-string) "nxml-glyph" "nxml/nxml-glyph.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from nxml/nxml-glyph.el (autoload 'nxml-glyph-display-string "nxml-glyph" "\ Return a string that can display a glyph for Unicode code-point N. FACE gives the face that will be used for displaying the string. Return nil if the face cannot display a glyph for N. \(fn N FACE)" nil nil) ;;;*** ;;;### (autoloads (nxml-mode) "nxml-mode" "nxml/nxml-mode.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from nxml/nxml-mode.el (autoload 'nxml-mode "nxml-mode" "\ Major mode for editing XML. \\[nxml-finish-element] finishes the current element by inserting an end-tag. C-c C-i closes a start-tag with `>' and then inserts a balancing end-tag leaving point between the start-tag and end-tag. \\[nxml-balanced-close-start-tag-block] is similar but for block rather than inline elements: the start-tag, point, and end-tag are all left on separate lines. If `nxml-slash-auto-complete-flag' is non-nil, then inserting a `</' automatically inserts the rest of the end-tag. \\[nxml-complete] performs completion on the symbol preceding point. \\[nxml-dynamic-markup-word] uses the contents of the current buffer to choose a tag to put around the word preceding point. Sections of the document can be displayed in outline form. The variable `nxml-section-element-name-regexp' controls when an element is recognized as a section. The same key sequences that change visibility in outline mode are used except that they start with C-c C-o instead of C-c. Validation is provided by the related minor-mode `rng-validate-mode'. This also makes completion schema- and context- sensitive. Element names, attribute names, attribute values and namespace URIs can all be completed. By default, `rng-validate-mode' is automatically enabled. You can toggle it using \\[rng-validate-mode] or change the default by customizing `rng-nxml-auto-validate-flag'. \\[indent-for-tab-command] indents the current line appropriately. This can be customized using the variable `nxml-child-indent' and the variable `nxml-attribute-indent'. \\[nxml-insert-named-char] inserts a character reference using the character's name (by default, the Unicode name). \\[universal-argument] \\[nxml-insert-named-char] inserts the character directly. The Emacs commands that normally operate on balanced expressions will operate on XML markup items. Thus \\[forward-sexp] will move forward across one markup item; \\[backward-sexp] will move backward across one markup item; \\[kill-sexp] will kill the following markup item; \\[mark-sexp] will mark the following markup item. By default, each tag each treated as a single markup item; to make the complete element be treated as a single markup item, set the variable `nxml-sexp-element-flag' to t. For more details, see the function `nxml-forward-balanced-item'. \\[nxml-backward-up-element] and \\[nxml-down-element] move up and down the element structure. Many aspects this mode can be customized using \\[customize-group] nxml RET. \(fn)" t nil) (defalias 'xml-mode 'nxml-mode) ;;;*** ;;;### (autoloads (nxml-enable-unicode-char-name-sets) "nxml-uchnm" ;;;;;; "nxml/nxml-uchnm.el" (19259 35427)) ;;; Generated autoloads from nxml/nxml-uchnm.el (autoload 'nxml-enable-unicode-char-name-sets "nxml-uchnm" "\ Enable the use of Unicode standard names for characters. The Unicode blocks for which names are enabled is controlled by the variable `nxml-enabled-unicode-blocks'. \(fn)" t nil) ;;;*** ;;;### (autoloads (inferior-octave) "octave-inf" "progmodes/octave-inf.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from progmodes/octave-inf.el (autoload 'inferior-octave "octave-inf" "\ Run an inferior Octave process, I/O via `inferior-octave-buffer'. This buffer is put in Inferior Octave mode. See `inferior-octave-mode'. Unless ARG is non-nil, switches to this buffer. The elements of the list `inferior-octave-startup-args' are sent as command line arguments to the inferior Octave process on startup. Additional commands to be executed on startup can be provided either in the file specified by `inferior-octave-startup-file' or by the default startup file, `~/.emacs-octave'. \(fn &optional ARG)" t nil) (defalias 'run-octave 'inferior-octave) ;;;*** ;;;### (autoloads (octave-mode) "octave-mod" "progmodes/octave-mod.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from progmodes/octave-mod.el (autoload 'octave-mode "octave-mod" "\ Major mode for editing Octave code. This mode makes it easier to write Octave code by helping with indentation, doing some of the typing for you (with Abbrev mode) and by showing keywords, comments, strings, etc.. in different faces (with Font Lock mode on terminals that support it). Octave itself is a high-level language, primarily intended for numerical computations. It provides a convenient command line interface for solving linear and nonlinear problems numerically. Function definitions can also be stored in files, and it can be used in a batch mode (which is why you need this mode!). The latest released version of Octave is always available via anonymous ftp from ftp.octave.org in the directory `/pub/octave'. Complete source and binaries for several popular systems are available. Type \\[list-abbrevs] to display the built-in abbrevs for Octave keywords. Keybindings =========== \\{octave-mode-map} Variables you can use to customize Octave mode ============================================== `octave-auto-indent' Non-nil means indent current line after a semicolon or space. Default is nil. `octave-auto-newline' Non-nil means auto-insert a newline and indent after a semicolon. Default is nil. `octave-blink-matching-block' Non-nil means show matching begin of block when inserting a space, newline or semicolon after an else or end keyword. Default is t. `octave-block-offset' Extra indentation applied to statements in block structures. Default is 2. `octave-continuation-offset' Extra indentation applied to Octave continuation lines. Default is 4. `octave-continuation-string' String used for Octave continuation lines. Default is a backslash. `octave-send-echo-input' Non-nil means always display `inferior-octave-buffer' after sending a command to the inferior Octave process. `octave-send-line-auto-forward' Non-nil means always go to the next unsent line of Octave code after sending a line to the inferior Octave process. `octave-send-echo-input' Non-nil means echo input sent to the inferior Octave process. Turning on Octave mode runs the hook `octave-mode-hook'. To begin using this mode for all `.m' files that you edit, add the following lines to your `.emacs' file: (add-to-list 'auto-mode-alist '(\"\\\\.m\\\\'\" . octave-mode)) To automatically turn on the abbrev and auto-fill features, add the following lines to your `.emacs' file as well: (add-hook 'octave-mode-hook (lambda () (abbrev-mode 1) (auto-fill-mode 1))) To submit a problem report, enter \\[octave-submit-bug-report] from an Octave mode buffer. This automatically sets up a mail buffer with version information already added. You just need to add a description of the problem, including a reproducible test case and send the message. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-customize org-reload org-require-autoloaded-modules ;;;;;; org-submit-bug-report org-cycle-agenda-files org-iswitchb ;;;;;; org-map-entries org-open-link-from-string org-open-at-point-global ;;;;;; org-insert-link-global org-store-link org-run-like-in-org-mode ;;;;;; turn-on-orgstruct++ turn-on-orgstruct orgstruct-mode org-global-cycle ;;;;;; org-mode) "org" "org/org.el" (19259 35427)) ;;; Generated autoloads from org/org.el (autoload 'org-mode "org" "\ Outline-based notes management and organizer, alias \"Carsten's outline-mode for keeping track of everything.\" Org-mode develops organizational tasks around a NOTES file which contains information about projects as plain text. Org-mode is implemented on top of outline-mode, which is ideal to keep the content of large files well structured. It supports ToDo items, deadlines and time stamps, which magically appear in the diary listing of the Emacs calendar. Tables are easily created with a built-in table editor. Plain text URL-like links connect to websites, emails (VM), Usenet messages (Gnus), BBDB entries, and any files related to the project. For printing and sharing of notes, an Org-mode file (or a part of it) can be exported as a structured ASCII or HTML file. The following commands are available: \\{org-mode-map} \(fn)" t nil) (defvar org-inlinetask-min-level) (autoload 'org-global-cycle "org" "\ Cycle the global visibility. For details see `org-cycle'. With C-u prefix arg, switch to startup visibility. With a numeric prefix, show all headlines up to that level. \(fn &optional ARG)" t nil) (autoload 'orgstruct-mode "org" "\ Toggle the minor more `orgstruct-mode'. This mode is for using Org-mode structure commands in other modes. The following key behave as if Org-mode was active, if the cursor is on a headline, or on a plain list item (both in the definition of Org-mode). M-up Move entry/item up M-down Move entry/item down M-left Promote M-right Demote M-S-up Move entry/item up M-S-down Move entry/item down M-S-left Promote subtree M-S-right Demote subtree M-q Fill paragraph and items like in Org-mode C-c ^ Sort entries C-c - Cycle list bullet TAB Cycle item visibility M-RET Insert new heading/item S-M-RET Insert new TODO heading / Checkbox item C-c C-c Set tags / toggle checkbox \(fn &optional ARG)" t nil) (autoload 'turn-on-orgstruct "org" "\ Unconditionally turn on `orgstruct-mode'. \(fn)" nil nil) (autoload 'turn-on-orgstruct++ "org" "\ Unconditionally turn on `orgstruct++-mode'. \(fn)" nil nil) (autoload 'org-run-like-in-org-mode "org" "\ Run a command, pretending that the current buffer is in Org-mode. This will temporarily bind local variables that are typically bound in Org-mode to the values they have in Org-mode, and then interactively call CMD. \(fn CMD)" nil nil) (autoload 'org-store-link "org" "\ \\<org-mode-map>Store an org-link to the current location. This link is added to `org-stored-links' and can later be inserted into an org-buffer with \\[org-insert-link]. For some link types, a prefix arg is interpreted: For links to usenet articles, arg negates `org-gnus-prefer-web-links'. For file links, arg negates `org-context-in-file-links'. \(fn ARG)" t nil) (autoload 'org-insert-link-global "org" "\ Insert a link like Org-mode does. This command can be called in any mode to insert a link in Org-mode syntax. \(fn)" t nil) (autoload 'org-open-at-point-global "org" "\ Follow a link like Org-mode does. This command can be called in any mode to follow a link that has Org-mode syntax. \(fn)" t nil) (autoload 'org-open-link-from-string "org" "\ Open a link in the string S, as if it was in Org-mode. \(fn S &optional ARG REFERENCE-BUFFER)" t nil) (autoload 'org-map-entries "org" "\ Call FUNC at each headline selected by MATCH in SCOPE. FUNC is a function or a lisp form. The function will be called without arguments, with the cursor positioned at the beginning of the headline. The return values of all calls to the function will be collected and returned as a list. The call to FUNC will be wrapped into a save-excursion form, so FUNC does not need to preserve point. After evaluation, the cursor will be moved to the end of the line (presumably of the headline of the processed entry) and search continues from there. Under some circumstances, this may not produce the wanted results. For example, if you have removed (e.g. archived) the current (sub)tree it could mean that the next entry will be skipped entirely. In such cases, you can specify the position from where search should continue by making FUNC set the variable `org-map-continue-from' to the desired buffer position. MATCH is a tags/property/todo match as it is used in the agenda tags view. Only headlines that are matched by this query will be considered during the iteration. When MATCH is nil or t, all headlines will be visited by the iteration. SCOPE determines the scope of this command. It can be any of: nil The current buffer, respecting the restriction if any tree The subtree started with the entry at point file The current buffer, without restriction file-with-archives The current buffer, and any archives associated with it agenda All agenda files agenda-with-archives All agenda files with any archive files associated with them \(file1 file2 ...) If this is a list, all files in the list will be scanned The remaining args are treated as settings for the skipping facilities of the scanner. The following items can be given here: archive skip trees with the archive tag. comment skip trees with the COMMENT keyword function or Emacs Lisp form: will be used as value for `org-agenda-skip-function', so whenever the function returns t, FUNC will not be called for that entry and search will continue from the point where the function leaves it. If your function needs to retrieve the tags including inherited tags at the *current* entry, you can use the value of the variable `org-scanner-tags' which will be much faster than getting the value with `org-get-tags-at'. If your function gets properties with `org-entry-properties' at the *current* entry, bind `org-trust-scanner-tags' to t around the call to `org-entry-properties' to get the same speedup. Note that if your function moves around to retrieve tags and properties at a *different* entry, you cannot use these techniques. \(fn FUNC &optional MATCH SCOPE &rest SKIP)" nil nil) (autoload 'org-iswitchb "org" "\ Use `org-icompleting-read' to prompt for an Org buffer to switch to. With a prefix argument, restrict available to files. With two prefix arguments, restrict available buffers to agenda files. \(fn &optional ARG)" t nil) (defalias 'org-ido-switchb 'org-iswitchb) (autoload 'org-cycle-agenda-files "org" "\ Cycle through the files in `org-agenda-files'. If the current buffer visits an agenda file, find the next one in the list. If the current buffer does not, find the first agenda file. \(fn)" t nil) (autoload 'org-submit-bug-report "org" "\ Submit a bug report on Org-mode via mail. Don't hesitate to report any problems or inaccurate documentation. If you don't have setup sending mail from (X)Emacs, please copy the output buffer into your mail program, as it gives us important information about your Org-mode version and configuration. \(fn)" t nil) (autoload 'org-require-autoloaded-modules "org" "\ Not documented \(fn)" t nil) (autoload 'org-reload "org" "\ Reload all org lisp files. With prefix arg UNCOMPILED, load the uncompiled versions. \(fn &optional UNCOMPILED)" t nil) (autoload 'org-customize "org" "\ Call the customize function with org as argument. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-agenda-to-appt org-calendar-goto-agenda org-agenda-check-for-timestamp-as-reason-to-ignore-todo-item ;;;;;; org-diary org-agenda-list-stuck-projects org-tags-view org-todo-list ;;;;;; org-search-view org-agenda-list org-batch-store-agenda-views ;;;;;; org-store-agenda-views org-batch-agenda-csv org-batch-agenda ;;;;;; org-agenda) "org-agenda" "org/org-agenda.el" (19259 35427)) ;;; Generated autoloads from org/org-agenda.el (autoload 'org-agenda "org-agenda" "\ Dispatch agenda commands to collect entries to the agenda buffer. Prompts for a command to execute. Any prefix arg will be passed on to the selected command. The default selections are: a Call `org-agenda-list' to display the agenda for current day or week. t Call `org-todo-list' to display the global todo list. T Call `org-todo-list' to display the global todo list, select only entries with a specific TODO keyword (the user gets a prompt). m Call `org-tags-view' to display headlines with tags matching a condition (the user is prompted for the condition). M Like `m', but select only TODO entries, no ordinary headlines. L Create a timeline for the current buffer. e Export views to associated files. s Search entries for keywords. / Multi occur across all agenda files and also files listed in `org-agenda-text-search-extra-files'. < Restrict agenda commands to buffer, subtree, or region. Press several times to get the desired effect. > Remove a previous restriction. # List \"stuck\" projects. ! Configure what \"stuck\" means. C Configure custom agenda commands. More commands can be added by configuring the variable `org-agenda-custom-commands'. In particular, specific tags and TODO keyword searches can be pre-defined in this way. If the current buffer is in Org-mode and visiting a file, you can also first press `<' once to indicate that the agenda should be temporarily \(until the next use of \\[org-agenda]) restricted to the current file. Pressing `<' twice means to restrict to the current subtree or region \(if active). \(fn &optional ARG KEYS RESTRICTION)" t nil) (autoload 'org-batch-agenda "org-agenda" "\ Run an agenda command in batch mode and send the result to STDOUT. If CMD-KEY is a string of length 1, it is used as a key in `org-agenda-custom-commands' and triggers this command. If it is a longer string it is used as a tags/todo match string. Paramters are alternating variable names and values that will be bound before running the agenda command. \(fn CMD-KEY &rest PARAMETERS)" nil (quote macro)) (autoload 'org-batch-agenda-csv "org-agenda" "\ Run an agenda command in batch mode and send the result to STDOUT. If CMD-KEY is a string of length 1, it is used as a key in `org-agenda-custom-commands' and triggers this command. If it is a longer string it is used as a tags/todo match string. Paramters are alternating variable names and values that will be bound before running the agenda command. The output gives a line for each selected agenda item. Each item is a list of comma-separated values, like this: category,head,type,todo,tags,date,time,extra,priority-l,priority-n category The category of the item head The headline, without TODO kwd, TAGS and PRIORITY type The type of the agenda entry, can be todo selected in TODO match tagsmatch selected in tags match diary imported from diary deadline a deadline on given date scheduled scheduled on given date timestamp entry has timestamp on given date closed entry was closed on given date upcoming-deadline warning about deadline past-scheduled forwarded scheduled item block entry has date block including g. date todo The todo keyword, if any tags All tags including inherited ones, separated by colons date The relevant date, like 2007-2-14 time The time, like 15:00-16:50 extra Sting with extra planning info priority-l The priority letter if any was given priority-n The computed numerical priority agenda-day The day in the agenda where this is listed \(fn CMD-KEY &rest PARAMETERS)" nil (quote macro)) (autoload 'org-store-agenda-views "org-agenda" "\ Not documented \(fn &rest PARAMETERS)" t nil) (autoload 'org-batch-store-agenda-views "org-agenda" "\ Run all custom agenda commands that have a file argument. \(fn &rest PARAMETERS)" nil (quote macro)) (autoload 'org-agenda-list "org-agenda" "\ Produce a daily/weekly view from all files in variable `org-agenda-files'. The view will be for the current day or week, but from the overview buffer you will be able to go to other days/weeks. With one \\[universal-argument] prefix argument INCLUDE-ALL, all unfinished TODO items will also be shown, before the agenda. This feature is considered obsolete, please use the TODO list or a block agenda instead. With a numeric prefix argument in an interactive call, the agenda will span INCLUDE-ALL days. Lisp programs should instead specify NDAYS to change the number of days. NDAYS defaults to `org-agenda-ndays'. START-DAY defaults to TODAY, or to the most recent match for the weekday given in `org-agenda-start-on-weekday'. \(fn &optional INCLUDE-ALL START-DAY NDAYS)" t nil) (autoload 'org-search-view "org-agenda" "\ Show all entries that contain words or regular expressions. If the first character of the search string is an asterisks, search only the headlines. With optional prefix argument TODO-ONLY, only consider entries that are TODO entries. The argument STRING can be used to pass a default search string into this function. If EDIT-AT is non-nil, it means that the user should get a chance to edit this string, with cursor at position EDIT-AT. The search string is broken into \"words\" by splitting at whitespace. Depending on the variable `org-agenda-search-view-search-words-only' and on whether the first character in the search string is \"+\" or \"-\", The string is then interpreted either as a substring with variable amounts of whitespace, or as a list or individual words that should be matched. The default is a substring match, where each space in the search string can expand to an arbitrary amount of whitespace, including newlines. If matching individual words, these words are then interpreted as a boolean expression with logical AND. Words prefixed with a minus must not occur in the entry. Words without a prefix or prefixed with a plus must occur in the entry. Matching is case-insensitive and the words are enclosed by word delimiters. Words enclosed by curly braces are interpreted as regular expressions that must or must not match in the entry. If the search string starts with an asterisk, search only in headlines. If (possibly after the leading star) the search string starts with an exclamation mark, this also means to look at TODO entries only, an effect that can also be achieved with a prefix argument. This command searches the agenda files, and in addition the files listed in `org-agenda-text-search-extra-files'. \(fn &optional TODO-ONLY STRING EDIT-AT)" t nil) (autoload 'org-todo-list "org-agenda" "\ Show all TODO entries from all agenda file in a single list. The prefix arg can be used to select a specific TODO keyword and limit the list to these. When using \\[universal-argument], you will be prompted for a keyword. A numeric prefix directly selects the Nth keyword in `org-todo-keywords-1'. \(fn ARG)" t nil) (autoload 'org-tags-view "org-agenda" "\ Show all headlines for all `org-agenda-files' matching a TAGS criterion. The prefix arg TODO-ONLY limits the search to TODO entries. \(fn &optional TODO-ONLY MATCH)" t nil) (autoload 'org-agenda-list-stuck-projects "org-agenda" "\ Create agenda view for projects that are stuck. Stuck projects are project that have no next actions. For the definitions of what a project is and how to check if it stuck, customize the variable `org-stuck-projects'. MATCH is being ignored. \(fn &rest IGNORE)" t nil) (autoload 'org-diary "org-agenda" "\ Return diary information from org-files. This function can be used in a \"sexp\" diary entry in the Emacs calendar. It accesses org files and extracts information from those files to be listed in the diary. The function accepts arguments specifying what items should be listed. The following arguments are allowed: :timestamp List the headlines of items containing a date stamp or date range matching the selected date. Deadlines will also be listed, on the expiration day. :sexp List entries resulting from diary-like sexps. :deadline List any deadlines past due, or due within `org-deadline-warning-days'. The listing occurs only in the diary for *today*, not at any other date. If an entry is marked DONE, it is no longer listed. :scheduled List all items which are scheduled for the given date. The diary for *today* also contains items which were scheduled earlier and are not yet marked DONE. :todo List all TODO items from the org-file. This may be a long list - so this is not turned on by default. Like deadlines, these entries only show up in the diary for *today*, not at any other date. The call in the diary file should look like this: &%%(org-diary) ~/path/to/some/orgfile.org Use a separate line for each org file to check. Or, if you omit the file name, all files listed in `org-agenda-files' will be checked automatically: &%%(org-diary) If you don't give any arguments (as in the example above), the default arguments (:deadline :scheduled :timestamp :sexp) are used. So the example above may also be written as &%%(org-diary :deadline :timestamp :sexp :scheduled) The function expects the lisp variables `entry' and `date' to be provided by the caller, because this is how the calendar works. Don't use this function from a program - use `org-agenda-get-day-entries' instead. \(fn &rest ARGS)" nil nil) (autoload 'org-agenda-check-for-timestamp-as-reason-to-ignore-todo-item "org-agenda" "\ Do we have a reason to ignore this todo entry because it has a time stamp? \(fn &optional END)" nil nil) (autoload 'org-calendar-goto-agenda "org-agenda" "\ Compute the Org-mode agenda for the calendar date displayed at the cursor. This is a command that has to be installed in `calendar-mode-map'. \(fn)" t nil) (autoload 'org-agenda-to-appt "org-agenda" "\ Activate appointments found in `org-agenda-files'. With a \\[universal-argument] prefix, refresh the list of appointments. If FILTER is t, interactively prompt the user for a regular expression, and filter out entries that don't match it. If FILTER is a string, use this string as a regular expression for filtering entries out. FILTER can also be an alist with the car of each cell being either 'headline or 'category. For example: '((headline \"IMPORTANT\") (category \"Work\")) will only add headlines containing IMPORTANT or headlines belonging to the \"Work\" category. \(fn &optional REFRESH FILTER)" t nil) ;;;*** ;;;### (autoloads (org-archive-subtree-default-with-confirmation ;;;;;; org-archive-subtree-default) "org-archive" "org/org-archive.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-archive.el (autoload 'org-archive-subtree-default "org-archive" "\ Archive the current subtree with the default command. This command is set with the variable `org-archive-default-command'. \(fn)" t nil) (autoload 'org-archive-subtree-default-with-confirmation "org-archive" "\ Archive the current subtree with the default command. This command is set with the variable `org-archive-default-command'. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-export-as-ascii org-export-region-as-ascii ;;;;;; org-replace-region-by-ascii org-export-as-ascii-to-buffer) ;;;;;; "org-ascii" "org/org-ascii.el" (19259 35427)) ;;; Generated autoloads from org/org-ascii.el (autoload 'org-export-as-ascii-to-buffer "org-ascii" "\ Call `org-export-as-ascii` with output to a temporary buffer. No file is created. The prefix ARG is passed through to `org-export-as-ascii'. \(fn ARG)" t nil) (autoload 'org-replace-region-by-ascii "org-ascii" "\ Assume the current region has org-mode syntax, and convert it to plain ASCII. This can be used in any buffer. For example, you could write an itemized list in org-mode syntax in a Mail buffer and then use this command to convert it. \(fn BEG END)" t nil) (autoload 'org-export-region-as-ascii "org-ascii" "\ Convert region from BEG to END in org-mode buffer to plain ASCII. If prefix arg BODY-ONLY is set, omit file header, footer, and table of contents, and only produce the region of converted text, useful for cut-and-paste operations. If BUFFER is a buffer or a string, use/create that buffer as a target of the converted ASCII. If BUFFER is the symbol `string', return the produced ASCII as a string and leave not buffer behind. For example, a Lisp program could call this function in the following way: (setq ascii (org-export-region-as-ascii beg end t 'string)) When called interactively, the output buffer is selected, and shown in a window. A non-interactive call will only return the buffer. \(fn BEG END &optional BODY-ONLY BUFFER)" t nil) (autoload 'org-export-as-ascii "org-ascii" "\ Export the outline as a pretty ASCII file. If there is an active region, export only the region. The prefix ARG specifies how many levels of the outline should become underlined headlines, default is 3. Lower levels will become bulleted lists. When HIDDEN is non-nil, don't display the ASCII buffer. EXT-PLIST is a property list with external parameters overriding org-mode's default settings, but still inferior to file-local settings. When TO-BUFFER is non-nil, create a buffer with that name and export to that buffer. If TO-BUFFER is the symbol `string', don't leave any buffer behind but just return the resulting ASCII as a string. When BODY-ONLY is set, don't produce the file header and footer. When PUB-DIR is set, use this as the publishing directory. \(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) ;;;*** ;;;### (autoloads (org-attach) "org-attach" "org/org-attach.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from org/org-attach.el (autoload 'org-attach "org-attach" "\ The dispatcher for attachment commands. Shows a list of commands and prompts for another key to execute a command. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-bbdb-anniversaries) "org-bbdb" "org/org-bbdb.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-bbdb.el (autoload 'org-bbdb-anniversaries "org-bbdb" "\ Extract anniversaries from BBDB for display in the agenda. \(fn)" nil nil) ;;;*** ;;;### (autoloads (org-clock-persistence-insinuate org-get-clocktable) ;;;;;; "org-clock" "org/org-clock.el" (19259 35427)) ;;; Generated autoloads from org/org-clock.el (autoload 'org-get-clocktable "org-clock" "\ Get a formatted clocktable with parameters according to PROPS. The table is created in a temporary buffer, fully formatted and fontified, and then returned. \(fn &rest PROPS)" nil nil) (autoload 'org-clock-persistence-insinuate "org-clock" "\ Set up hooks for clock persistence \(fn)" nil nil) ;;;*** ;;;### (autoloads (org-export-as-docbook org-export-as-docbook-pdf-and-open ;;;;;; org-export-as-docbook-pdf org-export-region-as-docbook org-replace-region-by-docbook ;;;;;; org-export-as-docbook-to-buffer org-export-as-docbook-batch) ;;;;;; "org-docbook" "org/org-docbook.el" (19259 35427)) ;;; Generated autoloads from org/org-docbook.el (autoload 'org-export-as-docbook-batch "org-docbook" "\ Call `org-export-as-docbook' in batch style. This function can be used in batch processing. For example: $ emacs --batch --load=$HOME/lib/emacs/org.el --visit=MyOrgFile.org --funcall org-export-as-docbook-batch \(fn)" nil nil) (autoload 'org-export-as-docbook-to-buffer "org-docbook" "\ Call `org-export-as-docbook' with output to a temporary buffer. No file is created. \(fn)" t nil) (autoload 'org-replace-region-by-docbook "org-docbook" "\ Replace the region from BEG to END with its DocBook export. It assumes the region has `org-mode' syntax, and then convert it to DocBook. This can be used in any buffer. For example, you could write an itemized list in `org-mode' syntax in an DocBook buffer and then use this command to convert it. \(fn BEG END)" t nil) (autoload 'org-export-region-as-docbook "org-docbook" "\ Convert region from BEG to END in `org-mode' buffer to DocBook. If prefix arg BODY-ONLY is set, omit file header and footer and only produce the region of converted text, useful for cut-and-paste operations. If BUFFER is a buffer or a string, use/create that buffer as a target of the converted DocBook. If BUFFER is the symbol `string', return the produced DocBook as a string and leave not buffer behind. For example, a Lisp program could call this function in the following way: (setq docbook (org-export-region-as-docbook beg end t 'string)) When called interactively, the output buffer is selected, and shown in a window. A non-interactive call will only return the buffer. \(fn BEG END &optional BODY-ONLY BUFFER)" t nil) (autoload 'org-export-as-docbook-pdf "org-docbook" "\ Export as DocBook XML file, and generate PDF file. \(fn &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) (autoload 'org-export-as-docbook-pdf-and-open "org-docbook" "\ Export as DocBook XML file, generate PDF file, and open it. \(fn)" t nil) (autoload 'org-export-as-docbook "org-docbook" "\ Export the current buffer as a DocBook file. If there is an active region, export only the region. When HIDDEN is obsolete and does nothing. EXT-PLIST is a property list with external parameters overriding org-mode's default settings, but still inferior to file-local settings. When TO-BUFFER is non-nil, create a buffer with that name and export to that buffer. If TO-BUFFER is the symbol `string', don't leave any buffer behind but just return the resulting HTML as a string. When BODY-ONLY is set, don't produce the file header and footer, simply return the content of the document (all top-level sections). When PUB-DIR is set, use this as the publishing directory. \(fn &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) ;;;*** ;;;### (autoloads (org-insert-export-options-template org-export-as-org ;;;;;; org-export-visible org-export) "org-exp" "org/org-exp.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-exp.el (autoload 'org-export "org-exp" "\ Export dispatcher for Org-mode. When `org-export-run-in-background' is non-nil, try to run the command in the background. This will be done only for commands that write to a file. For details see the docstring of `org-export-run-in-background'. The prefix argument ARG will be passed to the exporter. However, if ARG is a double universal prefix `C-u C-u', that means to inverse the value of `org-export-run-in-background'. \(fn &optional ARG)" t nil) (autoload 'org-export-visible "org-exp" "\ Create a copy of the visible part of the current buffer, and export it. The copy is created in a temporary buffer and removed after use. TYPE is the final key (as a string) that also select the export command in the `C-c C-e' export dispatcher. As a special case, if the you type SPC at the prompt, the temporary org-mode file will not be removed but presented to you so that you can continue to use it. The prefix arg ARG is passed through to the exporting command. \(fn TYPE ARG)" t nil) (autoload 'org-export-as-org "org-exp" "\ Make a copy with not-exporting stuff removed. The purpose of this function is to provide a way to export the source Org file of a webpage in Org format, but with sensitive and/or irrelevant stuff removed. This command will remove the following: - archived trees (if the variable `org-export-with-archived-trees' is nil) - comment blocks and trees starting with the COMMENT keyword - only trees that are consistent with `org-export-select-tags' and `org-export-exclude-tags'. The only arguments that will be used are EXT-PLIST and PUB-DIR, all the others will be ignored (but are present so that the general mechanism to call publishing functions will work). EXT-PLIST is a property list with external parameters overriding org-mode's default settings, but still inferior to file-local settings. When PUB-DIR is set, use this as the publishing directory. \(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) (autoload 'org-insert-export-options-template "org-exp" "\ Insert into the buffer a template with information for exporting. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-feed-show-raw-feed org-feed-goto-inbox org-feed-update ;;;;;; org-feed-update-all) "org-feed" "org/org-feed.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from org/org-feed.el (autoload 'org-feed-update-all "org-feed" "\ Get inbox items from all feeds in `org-feed-alist'. \(fn)" t nil) (autoload 'org-feed-update "org-feed" "\ Get inbox items from FEED. FEED can be a string with an association in `org-feed-alist', or it can be a list structured like an entry in `org-feed-alist'. \(fn FEED &optional RETRIEVE-ONLY)" t nil) (autoload 'org-feed-goto-inbox "org-feed" "\ Go to the inbox that captures the feed named FEED. \(fn FEED)" t nil) (autoload 'org-feed-show-raw-feed "org-feed" "\ Show the raw feed buffer of a feed. \(fn FEED)" t nil) ;;;*** ;;;### (autoloads (org-footnote-normalize org-footnote-action) "org-footnote" ;;;;;; "org/org-footnote.el" (19259 35427)) ;;; Generated autoloads from org/org-footnote.el (autoload 'org-footnote-action "org-footnote" "\ Do the right thing for footnotes. When at a footnote reference, jump to the definition. When at a definition, jump to the references. When neither at definition or reference, create a new footnote, interactively. With prefix arg SPECIAL, offer additional commands in a menu. \(fn &optional SPECIAL)" t nil) (autoload 'org-footnote-normalize "org-footnote" "\ Collect the footnotes in various formats and normalize them. This finds the different sorts of footnotes allowed in Org, and normalizes them to the usual [N] format that is understood by the Org-mode exporters. When SORT-ONLY is set, only sort the footnote definitions into the referenced sequence. \(fn &optional SORT-ONLY FOR-PREPROCESSOR)" nil nil) ;;;*** ;;;### (autoloads (org-freemind-to-org-mode org-freemind-from-org-sparse-tree ;;;;;; org-freemind-from-org-mode org-freemind-from-org-mode-node ;;;;;; org-freemind-show org-export-as-freemind) "org-freemind" ;;;;;; "org/org-freemind.el" (19259 35427)) ;;; Generated autoloads from org/org-freemind.el (autoload 'org-export-as-freemind "org-freemind" "\ Not documented \(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) (autoload 'org-freemind-show "org-freemind" "\ Show file MM-FILE in Freemind. \(fn MM-FILE)" t nil) (autoload 'org-freemind-from-org-mode-node "org-freemind" "\ Convert node at line NODE-LINE to the FreeMind file MM-FILE. \(fn NODE-LINE MM-FILE)" t nil) (autoload 'org-freemind-from-org-mode "org-freemind" "\ Convert the `org-mode' file ORG-FILE to the FreeMind file MM-FILE. \(fn ORG-FILE MM-FILE)" t nil) (autoload 'org-freemind-from-org-sparse-tree "org-freemind" "\ Convert visible part of buffer ORG-BUFFER to FreeMind file MM-FILE. \(fn ORG-BUFFER MM-FILE)" t nil) (autoload 'org-freemind-to-org-mode "org-freemind" "\ Convert FreeMind file MM-FILE to `org-mode' file ORG-FILE. \(fn MM-FILE ORG-FILE)" t nil) ;;;*** ;;;### (autoloads (org-export-htmlize-generate-css org-export-as-html ;;;;;; org-export-region-as-html org-replace-region-by-html org-export-as-html-to-buffer ;;;;;; org-export-as-html-batch org-export-as-html-and-open) "org-html" ;;;;;; "org/org-html.el" (19259 35427)) ;;; Generated autoloads from org/org-html.el (put 'org-export-html-style-include-default 'safe-local-variable 'booleanp) (put 'org-export-html-style 'safe-local-variable 'stringp) (put 'org-export-html-style-extra 'safe-local-variable 'stringp) (autoload 'org-export-as-html-and-open "org-html" "\ Export the outline as HTML and immediately open it with a browser. If there is an active region, export only the region. The prefix ARG specifies how many levels of the outline should become headlines. The default is 3. Lower levels will become bulleted lists. \(fn ARG)" t nil) (autoload 'org-export-as-html-batch "org-html" "\ Call `org-export-as-html', may be used in batch processing as emacs --batch --load=$HOME/lib/emacs/org.el --eval \"(setq org-export-headline-levels 2)\" --visit=MyFile --funcall org-export-as-html-batch \(fn)" nil nil) (autoload 'org-export-as-html-to-buffer "org-html" "\ Call `org-export-as-html` with output to a temporary buffer. No file is created. The prefix ARG is passed through to `org-export-as-html'. \(fn ARG)" t nil) (autoload 'org-replace-region-by-html "org-html" "\ Assume the current region has org-mode syntax, and convert it to HTML. This can be used in any buffer. For example, you could write an itemized list in org-mode syntax in an HTML buffer and then use this command to convert it. \(fn BEG END)" t nil) (autoload 'org-export-region-as-html "org-html" "\ Convert region from BEG to END in org-mode buffer to HTML. If prefix arg BODY-ONLY is set, omit file header, footer, and table of contents, and only produce the region of converted text, useful for cut-and-paste operations. If BUFFER is a buffer or a string, use/create that buffer as a target of the converted HTML. If BUFFER is the symbol `string', return the produced HTML as a string and leave not buffer behind. For example, a Lisp program could call this function in the following way: (setq html (org-export-region-as-html beg end t 'string)) When called interactively, the output buffer is selected, and shown in a window. A non-interactive call will only return the buffer. \(fn BEG END &optional BODY-ONLY BUFFER)" t nil) (autoload 'org-export-as-html "org-html" "\ Export the outline as a pretty HTML file. If there is an active region, export only the region. The prefix ARG specifies how many levels of the outline should become headlines. The default is 3. Lower levels will become bulleted lists. HIDDEN is obsolete and does nothing. EXT-PLIST is a property list with external parameters overriding org-mode's default settings, but still inferior to file-local settings. When TO-BUFFER is non-nil, create a buffer with that name and export to that buffer. If TO-BUFFER is the symbol `string', don't leave any buffer behind but just return the resulting HTML as a string. When BODY-ONLY is set, don't produce the file header and footer, simply return the content of <body>...</body>, without even the body tags themselves. When PUB-DIR is set, use this as the publishing directory. \(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) (autoload 'org-export-htmlize-generate-css "org-html" "\ Create the CSS for all font definitions in the current Emacs session. Use this to create face definitions in your CSS style file that can then be used by code snippets transformed by htmlize. This command just produces a buffer that contains class definitions for all faces used in the current Emacs session. You can copy and paste the ones you need into your CSS file. If you then set `org-export-htmlize-output-type' to `css', calls to the function `org-export-htmlize-region-for-paste' will produce code that uses these same face definitions. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-export-icalendar-combine-agenda-files org-export-icalendar-all-agenda-files ;;;;;; org-export-icalendar-this-file) "org-icalendar" "org/org-icalendar.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-icalendar.el (autoload 'org-export-icalendar-this-file "org-icalendar" "\ Export current file as an iCalendar file. The iCalendar file will be located in the same directory as the Org-mode file, but with extension `.ics'. \(fn)" t nil) (autoload 'org-export-icalendar-all-agenda-files "org-icalendar" "\ Export all files in `org-agenda-files' to iCalendar .ics files. Each iCalendar file will be located in the same directory as the Org-mode file, but with extension `.ics'. \(fn)" t nil) (autoload 'org-export-icalendar-combine-agenda-files "org-icalendar" "\ Export all files in `org-agenda-files' to a single combined iCalendar file. The file is stored under the name `org-combined-agenda-icalendar-file'. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-id-find-id-file org-id-find org-id-goto org-id-get-with-outline-drilling ;;;;;; org-id-get-with-outline-path-completion org-id-get org-id-copy ;;;;;; org-id-get-create) "org-id" "org/org-id.el" (19259 35427)) ;;; Generated autoloads from org/org-id.el (autoload 'org-id-get-create "org-id" "\ Create an ID for the current entry and return it. If the entry already has an ID, just return it. With optional argument FORCE, force the creation of a new ID. \(fn &optional FORCE)" t nil) (autoload 'org-id-copy "org-id" "\ Copy the ID of the entry at point to the kill ring. Create an ID if necessary. \(fn)" t nil) (autoload 'org-id-get "org-id" "\ Get the ID property of the entry at point-or-marker POM. If POM is nil, refer to the entry at point. If the entry does not have an ID, the function returns nil. However, when CREATE is non nil, create an ID if none is present already. PREFIX will be passed through to `org-id-new'. In any case, the ID of the entry is returned. \(fn &optional POM CREATE PREFIX)" nil nil) (autoload 'org-id-get-with-outline-path-completion "org-id" "\ Use outline-path-completion to retrieve the ID of an entry. TARGETS may be a setting for `org-refile-targets' to define the eligible headlines. When omitted, all headlines in all agenda files are eligible. It returns the ID of the entry. If necessary, the ID is created. \(fn &optional TARGETS)" nil nil) (autoload 'org-id-get-with-outline-drilling "org-id" "\ Use an outline-cycling interface to retrieve the ID of an entry. This only finds entries in the current buffer, using `org-get-location'. It returns the ID of the entry. If necessary, the ID is created. \(fn &optional TARGETS)" nil nil) (autoload 'org-id-goto "org-id" "\ Switch to the buffer containing the entry with id ID. Move the cursor to that entry in that buffer. \(fn ID)" t nil) (autoload 'org-id-find "org-id" "\ Return the location of the entry with the id ID. The return value is a cons cell (file-name . position), or nil if there is no entry with that ID. With optional argument MARKERP, return the position as a new marker. \(fn ID &optional MARKERP)" nil nil) (autoload 'org-id-find-id-file "org-id" "\ Query the id database for the file in which this ID is located. \(fn ID)" nil nil) ;;;*** ;;;### (autoloads (org-indent-mode) "org-indent" "org/org-indent.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-indent.el (autoload 'org-indent-mode "org-indent" "\ When active, indent text according to outline structure. Internally this works by adding `line-prefix' properties to all non-headlines. These properties are updated locally in idle time. FIXME: How to update when broken? \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (org-irc-store-link) "org-irc" "org/org-irc.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-irc.el (autoload 'org-irc-store-link "org-irc" "\ Dispatch to the appropriate function to store a link to an IRC session. \(fn)" nil nil) ;;;*** ;;;### (autoloads (org-export-as-pdf-and-open org-export-as-pdf org-export-as-latex ;;;;;; org-export-region-as-latex org-replace-region-by-latex org-export-as-latex-to-buffer ;;;;;; org-export-as-latex-batch) "org-latex" "org/org-latex.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-latex.el (autoload 'org-export-as-latex-batch "org-latex" "\ Call `org-export-as-latex', may be used in batch processing. For example: emacs --batch --load=$HOME/lib/emacs/org.el --eval \"(setq org-export-headline-levels 2)\" --visit=MyFile --funcall org-export-as-latex-batch \(fn)" nil nil) (autoload 'org-export-as-latex-to-buffer "org-latex" "\ Call `org-export-as-latex` with output to a temporary buffer. No file is created. The prefix ARG is passed through to `org-export-as-latex'. \(fn ARG)" t nil) (autoload 'org-replace-region-by-latex "org-latex" "\ Replace the region from BEG to END with its LaTeX export. It assumes the region has `org-mode' syntax, and then convert it to LaTeX. This can be used in any buffer. For example, you could write an itemized list in `org-mode' syntax in an LaTeX buffer and then use this command to convert it. \(fn BEG END)" t nil) (autoload 'org-export-region-as-latex "org-latex" "\ Convert region from BEG to END in `org-mode' buffer to LaTeX. If prefix arg BODY-ONLY is set, omit file header, footer, and table of contents, and only produce the region of converted text, useful for cut-and-paste operations. If BUFFER is a buffer or a string, use/create that buffer as a target of the converted LaTeX. If BUFFER is the symbol `string', return the produced LaTeX as a string and leave no buffer behind. For example, a Lisp program could call this function in the following way: (setq latex (org-export-region-as-latex beg end t 'string)) When called interactively, the output buffer is selected, and shown in a window. A non-interactive call will only return the buffer. \(fn BEG END &optional BODY-ONLY BUFFER)" t nil) (autoload 'org-export-as-latex "org-latex" "\ Export current buffer to a LaTeX file. If there is an active region, export only the region. The prefix ARG specifies how many levels of the outline should become headlines. The default is 3. Lower levels will be exported depending on `org-export-latex-low-levels'. The default is to convert them as description lists. HIDDEN is obsolete and does nothing. EXT-PLIST is a property list with external parameters overriding org-mode's default settings, but still inferior to file-local settings. When TO-BUFFER is non-nil, create a buffer with that name and export to that buffer. If TO-BUFFER is the symbol `string', don't leave any buffer behind but just return the resulting LaTeX as a string. When BODY-ONLY is set, don't produce the file header and footer, simply return the content of egin{document}...nd{document}, without even the egin{document} and nd{document} commands. when PUB-DIR is set, use this as the publishing directory. \(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) (autoload 'org-export-as-pdf "org-latex" "\ Export as LaTeX, then process through to PDF. \(fn ARG &optional HIDDEN EXT-PLIST TO-BUFFER BODY-ONLY PUB-DIR)" t nil) (autoload 'org-export-as-pdf-and-open "org-latex" "\ Export as LaTeX, then process through to PDF, and open. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (org-mobile-create-sumo-agenda org-mobile-pull ;;;;;; org-mobile-push) "org-mobile" "org/org-mobile.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from org/org-mobile.el (autoload 'org-mobile-push "org-mobile" "\ Push the current state of Org affairs to the WebDAV directory. This will create the index file, copy all agenda files there, and also create all custom agenda views, for upload to the mobile phone. \(fn)" t nil) (autoload 'org-mobile-pull "org-mobile" "\ Pull the contents of `org-mobile-capture-file' and integrate them. Apply all flagged actions, flag entries to be flagged and then call an agenda view showing the flagged items. \(fn)" t nil) (autoload 'org-mobile-create-sumo-agenda "org-mobile" "\ Create a file that contains all custom agenda views. \(fn)" t nil) ;;;*** ;;;### (autoloads (org-plot/gnuplot) "org-plot" "org/org-plot.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-plot.el (autoload 'org-plot/gnuplot "org-plot" "\ Plot table using gnuplot. Gnuplot options can be specified with PARAMS. If not given options will be taken from the +PLOT line directly before or after the table. \(fn &optional PARAMS)" t nil) ;;;*** ;;;### (autoloads (org-publish-current-project org-publish-current-file ;;;;;; org-publish-all org-publish) "org-publish" "org/org-publish.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-publish.el (defalias 'org-publish-project 'org-publish) (autoload 'org-publish "org-publish" "\ Publish PROJECT. \(fn PROJECT &optional FORCE)" t nil) (autoload 'org-publish-all "org-publish" "\ Publish all projects. With prefix argument, remove all files in the timestamp directory and force publishing all files. \(fn &optional FORCE)" t nil) (autoload 'org-publish-current-file "org-publish" "\ Publish the current file. With prefix argument, force publish the file. \(fn &optional FORCE)" t nil) (autoload 'org-publish-current-project "org-publish" "\ Publish the project associated with the current file. With a prefix argument, force publishing of all files in the project. \(fn &optional FORCE)" t nil) ;;;*** ;;;### (autoloads (org-remember-handler org-remember org-remember-apply-template ;;;;;; org-remember-annotation org-remember-insinuate) "org-remember" ;;;;;; "org/org-remember.el" (19259 35427)) ;;; Generated autoloads from org/org-remember.el (autoload 'org-remember-insinuate "org-remember" "\ Setup remember.el for use with Org-mode. \(fn)" nil nil) (autoload 'org-remember-annotation "org-remember" "\ Return a link to the current location as an annotation for remember.el. If you are using Org-mode files as target for data storage with remember.el, then the annotations should include a link compatible with the conventions in Org-mode. This function returns such a link. \(fn)" nil nil) (autoload 'org-remember-apply-template "org-remember" "\ Initialize *remember* buffer with template, invoke `org-mode'. This function should be placed into `remember-mode-hook' and in fact requires to be run from that hook to function properly. \(fn &optional USE-CHAR SKIP-INTERACTIVE)" nil nil) (autoload 'org-remember "org-remember" "\ Call `remember'. If this is already a remember buffer, re-apply template. If there is an active region, make sure remember uses it as initial content of the remember buffer. When called interactively with a `C-u' prefix argument GOTO, don't remember anything, just go to the file/headline where the selected template usually stores its notes. With a double prefix arg `C-u C-u', go to the last note stored by remember. Lisp programs can set ORG-FORCE-REMEMBER-TEMPLATE-CHAR to a character associated with a template in `org-remember-templates'. \(fn &optional GOTO ORG-FORCE-REMEMBER-TEMPLATE-CHAR)" t nil) (autoload 'org-remember-handler "org-remember" "\ Store stuff from remember.el into an org file. When the template has specified a file and a headline, the entry is filed there, or in the location defined by `org-default-notes-file' and `org-remember-default-headline'. If no defaults have been defined, or if the current prefix argument is 1 (so you must use `C-1 C-c C-c' to exit remember), an interactive process is used to select the target location. When the prefix is 0 (i.e. when remember is exited with `C-0 C-c C-c'), the entry is filed to the same location as the previous note. When the prefix is 2 (i.e. when remember is exited with `C-2 C-c C-c'), the entry is filed as a subentry of the entry where the clock is currently running. When `C-u' has been used as prefix argument, the note is stored and emacs moves point to the new location of the note, so that editing can be continued there (similar to inserting \"%&\" into the template). Before storing the note, the function ensures that the text has an org-mode-style headline, i.e. a first line that starts with a \"*\". If not, a headline is constructed from the current date and some additional data. If the variable `org-adapt-indentation' is non-nil, the entire text is also indented so that it starts in the same column as the headline \(i.e. after the stars). See also the variable `org-reverse-note-order'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (org-table-to-lisp orgtbl-mode turn-on-orgtbl) ;;;;;; "org-table" "org/org-table.el" (19259 35427)) ;;; Generated autoloads from org/org-table.el (autoload 'turn-on-orgtbl "org-table" "\ Unconditionally turn on `orgtbl-mode'. \(fn)" nil nil) (autoload 'orgtbl-mode "org-table" "\ The `org-mode' table editor as a minor mode for use in other modes. \(fn &optional ARG)" t nil) (autoload 'org-table-to-lisp "org-table" "\ Convert the table at point to a Lisp structure. The structure will be a list. Each item is either the symbol `hline' for a horizontal separator line, or a list of field values as strings. The table is taken from the parameter TXT, or from the buffer at point. \(fn &optional TXT)" nil nil) ;;;*** ;;;### (autoloads (org-timer-set-timer org-timer-item org-timer-change-times-in-region ;;;;;; org-timer org-timer-start) "org-timer" "org/org-timer.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-timer.el (autoload 'org-timer-start "org-timer" "\ Set the starting time for the relative timer to now. When called with prefix argument OFFSET, prompt the user for an offset time, with the default taken from a timer stamp at point, if any. If OFFSET is a string or an integer, it is directly taken to be the offset without user interaction. When called with a double prefix arg, all timer strings in the active region will be shifted by a specific amount. You will be prompted for the amount, with the default to make the first timer string in the region 0:00:00. \(fn &optional OFFSET)" t nil) (autoload 'org-timer "org-timer" "\ Insert a H:MM:SS string from the timer into the buffer. The first time this command is used, the timer is started. When used with a `C-u' prefix, force restarting the timer. When used with a double prefix arg `C-u C-u', change all the timer string in the region by a fixed amount. This can be used to recalibrate a timer that was not started at the correct moment. \(fn &optional RESTART)" t nil) (autoload 'org-timer-change-times-in-region "org-timer" "\ Change all h:mm:ss time in region by a DELTA. \(fn BEG END DELTA)" t nil) (autoload 'org-timer-item "org-timer" "\ Insert a description-type item with the current timer value. \(fn &optional ARG)" t nil) (autoload 'org-timer-set-timer "org-timer" "\ Set a timer. \(fn MINUTES)" t nil) ;;;*** ;;;### (autoloads (org-export-as-xoxo) "org-xoxo" "org/org-xoxo.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from org/org-xoxo.el (autoload 'org-export-as-xoxo "org-xoxo" "\ Export the org buffer as XOXO. The XOXO buffer is named *xoxo-<source buffer name>* \(fn &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (outline-minor-mode outline-mode) "outline" "outline.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from outline.el (put 'outline-regexp 'safe-local-variable 'string-or-null-p) (autoload 'outline-mode "outline" "\ Set major mode for editing outlines with selective display. Headings are lines which start with asterisks: one for major headings, two for subheadings, etc. Lines not starting with asterisks are body lines. Body text or subheadings under a heading can be made temporarily invisible, or visible again. Invisible lines are attached to the end of the heading, so they move with it, if the line is killed and yanked back. A heading with text hidden under it is marked with an ellipsis (...). Commands:\\<outline-mode-map> \\[outline-next-visible-heading] outline-next-visible-heading move by visible headings \\[outline-previous-visible-heading] outline-previous-visible-heading \\[outline-forward-same-level] outline-forward-same-level similar but skip subheadings \\[outline-backward-same-level] outline-backward-same-level \\[outline-up-heading] outline-up-heading move from subheading to heading \\[hide-body] make all text invisible (not headings). \\[show-all] make everything in buffer visible. \\[hide-sublevels] make only the first N levels of headers visible. The remaining commands are used when point is on a heading line. They apply to some of the body or subheadings of that heading. \\[hide-subtree] hide-subtree make body and subheadings invisible. \\[show-subtree] show-subtree make body and subheadings visible. \\[show-children] show-children make direct subheadings visible. No effect on body, or subheadings 2 or more levels down. With arg N, affects subheadings N levels down. \\[hide-entry] make immediately following body invisible. \\[show-entry] make it visible. \\[hide-leaves] make body under heading and under its subheadings invisible. The subheadings remain visible. \\[show-branches] make all subheadings at all levels visible. The variable `outline-regexp' can be changed to control what is a heading. A line is a heading if `outline-regexp' matches something at the beginning of the line. The longer the match, the deeper the level. Turning on outline mode calls the value of `text-mode-hook' and then of `outline-mode-hook', if they are non-nil. \(fn)" t nil) (autoload 'outline-minor-mode "outline" "\ Toggle Outline minor mode. With arg, turn Outline minor mode on if arg is positive, off otherwise. See the command `outline-mode' for more information on this mode. \(fn &optional ARG)" t nil) (put 'outline-level 'risky-local-variable t) ;;;*** ;;;### (autoloads (show-paren-mode) "paren" "paren.el" (19259 35427)) ;;; Generated autoloads from paren.el (defvar show-paren-mode nil "\ Non-nil if Show-Paren mode is enabled. See the command `show-paren-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `show-paren-mode'.") (custom-autoload 'show-paren-mode "paren" nil) (autoload 'show-paren-mode "paren" "\ Toggle Show Paren mode. With prefix ARG, turn Show Paren mode on if and only if ARG is positive. Returns the new status of Show Paren mode (non-nil means on). When Show Paren mode is enabled, any matching parenthesis is highlighted in `show-paren-style' after `show-paren-delay' seconds of Emacs idle time. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (parse-time-string) "parse-time" "calendar/parse-time.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from calendar/parse-time.el (put 'parse-time-rules 'risky-local-variable t) (autoload 'parse-time-string "parse-time" "\ Parse the time-string STRING into (SEC MIN HOUR DAY MON YEAR DOW DST TZ). The values are identical to those of `decode-time', but any values that are unknown are returned as nil. \(fn STRING)" nil nil) ;;;*** ;;;### (autoloads (pascal-mode) "pascal" "progmodes/pascal.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from progmodes/pascal.el (autoload 'pascal-mode "pascal" "\ Major mode for editing Pascal code. \\<pascal-mode-map> TAB indents for Pascal code. Delete converts tabs to spaces as it moves back. \\[pascal-complete-word] completes the word around current point with respect to position in code \\[pascal-show-completions] shows all possible completions at this point. Other useful functions are: \\[pascal-mark-defun] - Mark function. \\[pascal-insert-block] - insert begin ... end; \\[pascal-star-comment] - insert (* ... *) \\[pascal-comment-area] - Put marked area in a comment, fixing nested comments. \\[pascal-uncomment-area] - Uncomment an area commented with \\[pascal-comment-area]. \\[pascal-beg-of-defun] - Move to beginning of current function. \\[pascal-end-of-defun] - Move to end of current function. \\[pascal-goto-defun] - Goto function prompted for in the minibuffer. \\[pascal-outline-mode] - Enter `pascal-outline-mode'. Variables controlling indentation/edit style: pascal-indent-level (default 3) Indentation of Pascal statements with respect to containing block. pascal-case-indent (default 2) Indentation for case statements. pascal-auto-newline (default nil) Non-nil means automatically newline after semicolons and the punctuation mark after an end. pascal-indent-nested-functions (default t) Non-nil means nested functions are indented. pascal-tab-always-indent (default t) Non-nil means TAB in Pascal mode should always reindent the current line, regardless of where in the line point is when the TAB command is used. pascal-auto-endcomments (default t) Non-nil means a comment { ... } is set after the ends which ends cases and functions. The name of the function or case will be set between the braces. pascal-auto-lineup (default t) List of contexts where auto lineup of :'s or ='s should be done. See also the user variables pascal-type-keywords, pascal-start-keywords and pascal-separator-keywords. Turning on Pascal mode calls the value of the variable pascal-mode-hook with no args, if that value is non-nil. \(fn)" t nil) ;;;*** ;;;### (autoloads (pc-bindings-mode) "pc-mode" "emulation/pc-mode.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from emulation/pc-mode.el (autoload 'pc-bindings-mode "pc-mode" "\ Set up certain key bindings for PC compatibility. The keys affected are: Delete (and its variants) delete forward instead of backward. C-Backspace kills backward a word (as C-Delete normally would). M-Backspace does undo. Home and End move to beginning and end of line C-Home and C-End move to beginning and end of buffer. C-Escape does list-buffers. \(fn)" t nil) ;;;*** ;;;### (autoloads (pc-selection-mode) "pc-select" "emulation/pc-select.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from emulation/pc-select.el (defvar pc-selection-mode nil "\ Non-nil if Pc-Selection mode is enabled. See the command `pc-selection-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `pc-selection-mode'.") (custom-autoload 'pc-selection-mode "pc-select" nil) (autoload 'pc-selection-mode "pc-select" "\ Change mark behavior to emulate Motif, MAC or MS-Windows cut and paste style. This mode enables Delete Selection mode and Transient Mark mode. The arrow keys (and others) are bound to new functions which modify the status of the mark. The ordinary arrow keys disable the mark. The shift-arrow keys move, leaving the mark behind. C-LEFT and C-RIGHT move back or forward one word, disabling the mark. S-C-LEFT and S-C-RIGHT move back or forward one word, leaving the mark behind. M-LEFT and M-RIGHT move back or forward one word or sexp, disabling the mark. S-M-LEFT and S-M-RIGHT move back or forward one word or sexp, leaving the mark behind. To control whether these keys move word-wise or sexp-wise set the variable `pc-select-meta-moves-sexps' after loading pc-select.el but before turning PC Selection mode on. C-DOWN and C-UP move back or forward a paragraph, disabling the mark. S-C-DOWN and S-C-UP move back or forward a paragraph, leaving the mark behind. HOME moves to beginning of line, disabling the mark. S-HOME moves to beginning of line, leaving the mark behind. With Ctrl or Meta, these keys move to beginning of buffer instead. END moves to end of line, disabling the mark. S-END moves to end of line, leaving the mark behind. With Ctrl or Meta, these keys move to end of buffer instead. PRIOR or PAGE-UP scrolls and disables the mark. S-PRIOR or S-PAGE-UP scrolls and leaves the mark behind. S-DELETE kills the region (`kill-region'). S-INSERT yanks text from the kill ring (`yank'). C-INSERT copies the region into the kill ring (`copy-region-as-kill'). In addition, certain other PC bindings are imitated (to avoid this, set the variable `pc-select-selection-keys-only' to t after loading pc-select.el but before calling PC Selection mode): F6 other-window DELETE delete-char C-DELETE kill-line M-DELETE kill-word C-M-DELETE kill-sexp C-BACKSPACE backward-kill-word M-BACKSPACE undo \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (pcomplete/cvs) "pcmpl-cvs" "pcmpl-cvs.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from pcmpl-cvs.el (autoload 'pcomplete/cvs "pcmpl-cvs" "\ Completion rules for the `cvs' command. \(fn)" nil nil) ;;;*** ;;;### (autoloads (pcomplete/tar pcomplete/make pcomplete/bzip2 pcomplete/gzip) ;;;;;; "pcmpl-gnu" "pcmpl-gnu.el" (19259 35427)) ;;; Generated autoloads from pcmpl-gnu.el (autoload 'pcomplete/gzip "pcmpl-gnu" "\ Completion for `gzip'. \(fn)" nil nil) (autoload 'pcomplete/bzip2 "pcmpl-gnu" "\ Completion for `bzip2'. \(fn)" nil nil) (autoload 'pcomplete/make "pcmpl-gnu" "\ Completion for GNU `make'. \(fn)" nil nil) (autoload 'pcomplete/tar "pcmpl-gnu" "\ Completion for the GNU tar utility. \(fn)" nil nil) (defalias 'pcomplete/gdb 'pcomplete/xargs) ;;;*** ;;;### (autoloads (pcomplete/mount pcomplete/umount pcomplete/kill) ;;;;;; "pcmpl-linux" "pcmpl-linux.el" (19259 35427)) ;;; Generated autoloads from pcmpl-linux.el (autoload 'pcomplete/kill "pcmpl-linux" "\ Completion for GNU/Linux `kill', using /proc filesystem. \(fn)" nil nil) (autoload 'pcomplete/umount "pcmpl-linux" "\ Completion for GNU/Linux `umount'. \(fn)" nil nil) (autoload 'pcomplete/mount "pcmpl-linux" "\ Completion for GNU/Linux `mount'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (pcomplete/rpm) "pcmpl-rpm" "pcmpl-rpm.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from pcmpl-rpm.el (autoload 'pcomplete/rpm "pcmpl-rpm" "\ Completion for the `rpm' command. \(fn)" nil nil) ;;;*** ;;;### (autoloads (pcomplete/scp pcomplete/ssh pcomplete/chgrp pcomplete/chown ;;;;;; pcomplete/which pcomplete/xargs pcomplete/rm pcomplete/rmdir ;;;;;; pcomplete/cd) "pcmpl-unix" "pcmpl-unix.el" (19259 35427)) ;;; Generated autoloads from pcmpl-unix.el (autoload 'pcomplete/cd "pcmpl-unix" "\ Completion for `cd'. \(fn)" nil nil) (defalias 'pcomplete/pushd 'pcomplete/cd) (autoload 'pcomplete/rmdir "pcmpl-unix" "\ Completion for `rmdir'. \(fn)" nil nil) (autoload 'pcomplete/rm "pcmpl-unix" "\ Completion for `rm'. \(fn)" nil nil) (autoload 'pcomplete/xargs "pcmpl-unix" "\ Completion for `xargs'. \(fn)" nil nil) (defalias 'pcomplete/time 'pcomplete/xargs) (autoload 'pcomplete/which "pcmpl-unix" "\ Completion for `which'. \(fn)" nil nil) (autoload 'pcomplete/chown "pcmpl-unix" "\ Completion for the `chown' command. \(fn)" nil nil) (autoload 'pcomplete/chgrp "pcmpl-unix" "\ Completion for the `chgrp' command. \(fn)" nil nil) (autoload 'pcomplete/ssh "pcmpl-unix" "\ Completion rules for the `ssh' command. \(fn)" nil nil) (autoload 'pcomplete/scp "pcmpl-unix" "\ Completion rules for the `scp' command. Includes files as well as host names followed by a colon. \(fn)" nil nil) ;;;*** ;;;### (autoloads (pcomplete-shell-setup pcomplete-comint-setup pcomplete-list ;;;;;; pcomplete-help pcomplete-expand pcomplete-continue pcomplete-expand-and-complete ;;;;;; pcomplete-reverse pcomplete) "pcomplete" "pcomplete.el" (19259 ;;;;;; 35427)) ;;; Generated autoloads from pcomplete.el (autoload 'pcomplete "pcomplete" "\ Support extensible programmable completion. To use this function, just bind the TAB key to it, or add it to your completion functions list (it should occur fairly early in the list). \(fn &optional INTERACTIVELY)" t nil) (autoload 'pcomplete-reverse "pcomplete" "\ If cycling completion is in use, cycle backwards. \(fn)" t nil) (autoload 'pcomplete-expand-and-complete "pcomplete" "\ Expand the textual value of the current argument. This will modify the current buffer. \(fn)" t nil) (autoload 'pcomplete-continue "pcomplete" "\ Complete without reference to any cycling completions. \(fn)" t nil) (autoload 'pcomplete-expand "pcomplete" "\ Expand the textual value of the current argument. This will modify the current buffer. \(fn)" t nil) (autoload 'pcomplete-help "pcomplete" "\ Display any help information relative to the current argument. \(fn)" t nil) (autoload 'pcomplete-list "pcomplete" "\ Show the list of possible completions for the current argument. \(fn)" t nil) (autoload 'pcomplete-comint-setup "pcomplete" "\ Setup a comint buffer to use pcomplete. COMPLETEF-SYM should be the symbol where the dynamic-complete-functions are kept. For comint mode itself, this is `comint-dynamic-complete-functions'. \(fn COMPLETEF-SYM)" nil nil) (autoload 'pcomplete-shell-setup "pcomplete" "\ Setup `shell-mode' to use pcomplete. \(fn)" nil nil) ;;;*** ;;;### (autoloads (cvs-dired-use-hook cvs-dired-action cvs-status ;;;;;; cvs-update cvs-examine cvs-quickdir cvs-checkout) "pcvs" ;;;;;; "pcvs.el" (19259 35427)) ;;; Generated autoloads from pcvs.el (autoload 'cvs-checkout "pcvs" "\ Run a 'cvs checkout MODULES' in DIR. Feed the output to a *cvs* buffer, display it in the current window, and run `cvs-mode' on it. With a prefix argument, prompt for cvs FLAGS to use. \(fn MODULES DIR FLAGS &optional ROOT)" t nil) (autoload 'cvs-quickdir "pcvs" "\ Open a *cvs* buffer on DIR without running cvs. With a prefix argument, prompt for a directory to use. A prefix arg >8 (ex: \\[universal-argument] \\[universal-argument]), prevents reuse of an existing *cvs* buffer. Optional argument NOSHOW if non-nil means not to display the buffer. FLAGS is ignored. \(fn DIR &optional FLAGS NOSHOW)" t nil) (autoload 'cvs-examine "pcvs" "\ Run a `cvs -n update' in the specified DIRECTORY. That is, check what needs to be done, but don't change the disc. Feed the output to a *cvs* buffer and run `cvs-mode' on it. With a prefix argument, prompt for a directory and cvs FLAGS to use. A prefix arg >8 (ex: \\[universal-argument] \\[universal-argument]), prevents reuse of an existing *cvs* buffer. Optional argument NOSHOW if non-nil means not to display the buffer. \(fn DIRECTORY FLAGS &optional NOSHOW)" t nil) (autoload 'cvs-update "pcvs" "\ Run a `cvs update' in the current working DIRECTORY. Feed the output to a *cvs* buffer and run `cvs-mode' on it. With a \\[universal-argument] prefix argument, prompt for a directory to use. A prefix arg >8 (ex: \\[universal-argument] \\[universal-argument]), prevents reuse of an existing *cvs* buffer. The prefix is also passed to `cvs-flags-query' to select the FLAGS passed to cvs. \(fn DIRECTORY FLAGS)" t nil) (autoload 'cvs-status "pcvs" "\ Run a `cvs status' in the current working DIRECTORY. Feed the output to a *cvs* buffer and run `cvs-mode' on it. With a prefix argument, prompt for a directory and cvs FLAGS to use. A prefix arg >8 (ex: \\[universal-argument] \\[universal-argument]), prevents reuse of an existing *cvs* buffer. Optional argument NOSHOW if non-nil means not to display the buffer. \(fn DIRECTORY FLAGS &optional NOSHOW)" t nil) (defvar cvs-dired-action 'cvs-quickdir "\ The action to be performed when opening a CVS directory. Sensible values are `cvs-examine', `cvs-status' and `cvs-quickdir'.") (custom-autoload 'cvs-dired-action "pcvs" t) (defvar cvs-dired-use-hook '(4) "\ Whether or not opening a CVS directory should run PCL-CVS. A value of nil means never do it. ALWAYS means to always do it unless a prefix argument is given to the command that prompted the opening of the directory. Anything else means to do it only if the prefix arg is equal to this value.") (custom-autoload 'cvs-dired-use-hook "pcvs" t) (defun cvs-dired-noselect (dir) "\ Run `cvs-examine' if DIR is a CVS administrative directory. The exact behavior is determined also by `cvs-dired-use-hook'." (when (stringp dir) (setq dir (directory-file-name dir)) (when (and (string= "CVS" (file-name-nondirectory dir)) (file-readable-p (expand-file-name "Entries" dir)) cvs-dired-use-hook (if (eq cvs-dired-use-hook (quote always)) (not current-prefix-arg) (equal current-prefix-arg cvs-dired-use-hook))) (save-excursion (funcall cvs-dired-action (file-name-directory dir) t t))))) ;;;*** ;;;### (autoloads nil "pcvs-defs" "pcvs-defs.el" (19259 35427)) ;;; Generated autoloads from pcvs-defs.el (defvar cvs-global-menu (let ((m (make-sparse-keymap "PCL-CVS"))) (define-key m [status] `(menu-item ,(purecopy "Directory Status") cvs-status :help ,(purecopy "A more verbose status of a workarea"))) (define-key m [checkout] `(menu-item ,(purecopy "Checkout Module") cvs-checkout :help ,(purecopy "Check out a module from the repository"))) (define-key m [update] `(menu-item ,(purecopy "Update Directory") cvs-update :help ,(purecopy "Fetch updates from the repository"))) (define-key m [examine] `(menu-item ,(purecopy "Examine Directory") cvs-examine :help ,(purecopy "Examine the current state of a workarea"))) (fset 'cvs-global-menu m))) ;;;*** ;;;### (autoloads (perl-mode) "perl-mode" "progmodes/perl-mode.el" ;;;;;; (19259 35427)) ;;; Generated autoloads from progmodes/perl-mode.el (put 'perl-indent-level 'safe-local-variable 'integerp) (put 'perl-continued-statement-offset 'safe-local-variable 'integerp) (put 'perl-continued-brace-offset 'safe-local-variable 'integerp) (put 'perl-brace-offset 'safe-local-variable 'integerp) (put 'perl-brace-imaginary-offset 'safe-local-variable 'integerp) (put 'perl-label-offset 'safe-local-variable 'integerp) (autoload 'perl-mode "perl-mode" "\ Major mode for editing Perl code. Expression and list commands understand all Perl brackets. Tab indents for Perl code. Comments are delimited with # ... \\n. Paragraphs are separated by blank lines only. Delete converts tabs to spaces as it moves back. \\{perl-mode-map} Variables controlling indentation style: `perl-tab-always-indent' Non-nil means TAB in Perl mode should always indent the current line, regardless of where in the line point is when the TAB command is used. `perl-tab-to-comment' Non-nil means that for lines which don't need indenting, TAB will either delete an empty comment, indent an existing comment, move to end-of-line, or if at end-of-line already, create a new comment. `perl-nochange' Lines starting with this regular expression are not auto-indented. `perl-indent-level' Indentation of Perl statements within surrounding block. The surrounding block's indentation is the indentation of the line on which the open-brace appears. `perl-continued-statement-offset' Extra indentation given to a substatement, such as the then-clause of an if or body of a while. `perl-continued-brace-offset' Extra indentation given to a brace that starts a substatement. This is in addition to `perl-continued-statement-offset'. `perl-brace-offset' Extra indentation for line if it starts with an open brace. `perl-brace-imaginary-offset' An open brace following other text is treated as if it were this far to the right of the start of its line. `perl-label-offset' Extra indentation for line that is a label. `perl-indent-continued-arguments' Offset of argument lines relative to usual indentation. Various indentation styles: K&R BSD BLK GNU LW perl-indent-level 5 8 0 2 4 perl-continued-statement-offset 5 8 4 2 4 perl-continued-brace-offset 0 0 0 0 -4 perl-brace-offset -5 -8 0 0 0 perl-brace-imaginary-offset 0 0 4 0 0 perl-label-offset -5 -8 -2 -2 -2 Turning on Perl mode runs the normal hook `perl-mode-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (pgg-snarf-keys pgg-snarf-keys-region pgg-insert-key ;;;;;; pgg-verify pgg-verify-region pgg-sign pgg-sign-region pgg-decrypt ;;;;;; pgg-decrypt-region pgg-encrypt pgg-encrypt-symmetric pgg-encrypt-symmetric-region ;;;;;; pgg-encrypt-region) "pgg" "pgg.el" (19259 35428)) ;;; Generated autoloads from pgg.el (autoload 'pgg-encrypt-region "pgg" "\ Encrypt the current region between START and END for RCPTS. If optional argument SIGN is non-nil, do a combined sign and encrypt. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn START END RCPTS &optional SIGN PASSPHRASE)" t nil) (autoload 'pgg-encrypt-symmetric-region "pgg" "\ Encrypt the current region between START and END symmetric with passphrase. If optional PASSPHRASE is not specified, it will be obtained from the cache or user. \(fn START END &optional PASSPHRASE)" t nil) (autoload 'pgg-encrypt-symmetric "pgg" "\ Encrypt the current buffer using a symmetric, rather than key-pair, cipher. If optional arguments START and END are specified, only encrypt within the region. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn &optional START END PASSPHRASE)" t nil) (autoload 'pgg-encrypt "pgg" "\ Encrypt the current buffer for RCPTS. If optional argument SIGN is non-nil, do a combined sign and encrypt. If optional arguments START and END are specified, only encrypt within the region. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn RCPTS &optional SIGN START END PASSPHRASE)" t nil) (autoload 'pgg-decrypt-region "pgg" "\ Decrypt the current region between START and END. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn START END &optional PASSPHRASE)" t nil) (autoload 'pgg-decrypt "pgg" "\ Decrypt the current buffer. If optional arguments START and END are specified, only decrypt within the region. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn &optional START END PASSPHRASE)" t nil) (autoload 'pgg-sign-region "pgg" "\ Make the signature from text between START and END. If the optional 3rd argument CLEARTEXT is non-nil, it does not create a detached signature. If this function is called interactively, CLEARTEXT is enabled and the output is displayed. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn START END &optional CLEARTEXT PASSPHRASE)" t nil) (autoload 'pgg-sign "pgg" "\ Sign the current buffer. If the optional argument CLEARTEXT is non-nil, it does not create a detached signature. If optional arguments START and END are specified, only sign data within the region. If this function is called interactively, CLEARTEXT is enabled and the output is displayed. If optional PASSPHRASE is not specified, it will be obtained from the passphrase cache or user. \(fn &optional CLEARTEXT START END PASSPHRASE)" t nil) (autoload 'pgg-verify-region "pgg" "\ Verify the current region between START and END. If the optional 3rd argument SIGNATURE is non-nil, it is treated as the detached signature of the current region. If the optional 4th argument FETCH is non-nil, we attempt to fetch the signer's public key from `pgg-default-keyserver-address'. \(fn START END &optional SIGNATURE FETCH)" t nil) (autoload 'pgg-verify "pgg" "\ Verify the current buffer. If the optional argument SIGNATURE is non-nil, it is treated as the detached signature of the current region. If the optional argument FETCH is non-nil, we attempt to fetch the signer's public key from `pgg-default-keyserver-address'. If optional arguments START and END are specified, only verify data within the region. \(fn &optional SIGNATURE FETCH START END)" t nil) (autoload 'pgg-insert-key "pgg" "\ Insert the ASCII armored public key. \(fn)" t nil) (autoload 'pgg-snarf-keys-region "pgg" "\ Import public keys in the current region between START and END. \(fn START END)" t nil) (autoload 'pgg-snarf-keys "pgg" "\ Import public keys in the current buffer. \(fn)" t nil) ;;;*** ;;;### (autoloads (pgg-gpg-symmetric-key-p) "pgg-gpg" "pgg-gpg.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from pgg-gpg.el (autoload 'pgg-gpg-symmetric-key-p "pgg-gpg" "\ True if decoded armor MESSAGE-KEYS has symmetric encryption indicator. \(fn MESSAGE-KEYS)" nil nil) ;;;*** ;;;### (autoloads (picture-mode) "picture" "textmodes/picture.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from textmodes/picture.el (autoload 'picture-mode "picture" "\ Switch to Picture mode, in which a quarter-plane screen model is used. \\<picture-mode-map> Printing characters replace instead of inserting themselves with motion afterwards settable by these commands: Move left after insertion: \\[picture-movement-left] Move right after insertion: \\[picture-movement-right] Move up after insertion: \\[picture-movement-up] Move down after insertion: \\[picture-movement-down] Move northwest (nw) after insertion: \\[picture-movement-nw] Move northeast (ne) after insertion: \\[picture-movement-ne] Move southwest (sw) after insertion: \\[picture-movement-sw] Move southeast (se) after insertion: \\[picture-movement-se] Move westnorthwest (wnw) after insertion: C-u \\[picture-movement-nw] Move eastnortheast (ene) after insertion: C-u \\[picture-movement-ne] Move westsouthwest (wsw) after insertion: C-u \\[picture-movement-sw] Move eastsoutheast (ese) after insertion: C-u \\[picture-movement-se] The current direction is displayed in the mode line. The initial direction is right. Whitespace is inserted and tabs are changed to spaces when required by movement. You can move around in the buffer with these commands: Move vertically to SAME column in previous line: \\[picture-move-down] Move vertically to SAME column in next line: \\[picture-move-up] Move to column following last non-whitespace character: \\[picture-end-of-line] Move right, inserting spaces if required: \\[picture-forward-column] Move left changing tabs to spaces if required: \\[picture-backward-column] Move in direction of current picture motion: \\[picture-motion] Move opposite to current picture motion: \\[picture-motion-reverse] Move to beginning of next line: \\[next-line] You can edit tabular text with these commands: Move to column beneath (or at) next interesting character (see variable `picture-tab-chars'): \\[picture-tab-search] Move to next stop in tab stop list: \\[picture-tab] Set tab stops according to context of this line: \\[picture-set-tab-stops] (With ARG, resets tab stops to default value.) Change the tab stop list: \\[edit-tab-stops] You can manipulate text with these commands: Clear ARG columns after point without moving: \\[picture-clear-column] Delete char at point: \\[delete-char] Clear ARG columns backward: \\[picture-backward-clear-column] Clear ARG lines, advancing over them: \\[picture-clear-line] (the cleared text is saved in the kill ring) Open blank line(s) beneath current line: \\[picture-open-line] You can manipulate rectangles with these commands: Clear a rectangle and save it: \\[picture-clear-rectangle] Clear a rectangle, saving in a named register: \\[picture-clear-rectangle-to-register] Insert currently saved rectangle at point: \\[picture-yank-rectangle] Insert rectangle from named register: \\[picture-yank-rectangle-from-register] Draw a rectangular box around mark and point: \\[picture-draw-rectangle] Copies a rectangle to a register: \\[copy-rectangle-to-register] Undo effects of rectangle overlay commands: \\[undo] You can return to the previous mode with \\[picture-mode-exit], which also strips trailing whitespace from every line. Stripping is suppressed by supplying an argument. Entry to this mode calls the value of `picture-mode-hook' if non-nil. Note that Picture mode commands will work outside of Picture mode, but they are not defaultly assigned to keys. \(fn)" t nil) (defalias 'edit-picture 'picture-mode) ;;;*** ;;;### (autoloads (po-find-file-coding-system) "po" "textmodes/po.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from textmodes/po.el (autoload 'po-find-file-coding-system "po" "\ Return a (DECODING . ENCODING) pair, according to PO file's charset. Called through `file-coding-system-alist', before the file is visited for real. \(fn ARG-LIST)" nil nil) ;;;*** ;;;### (autoloads (pong) "pong" "play/pong.el" (19259 35428)) ;;; Generated autoloads from play/pong.el (autoload 'pong "pong" "\ Play pong and waste time. This is an implementation of the classical game pong. Move left and right bats and try to bounce the ball to your opponent. pong-mode keybindings:\\<pong-mode-map> \\{pong-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (pp-macroexpand-last-sexp pp-eval-last-sexp pp-macroexpand-expression ;;;;;; pp-eval-expression pp pp-buffer pp-to-string) "pp" "emacs-lisp/pp.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from emacs-lisp/pp.el (autoload 'pp-to-string "pp" "\ Return a string containing the pretty-printed representation of OBJECT. OBJECT can be any Lisp object. Quoting characters are used as needed to make output that `read' can handle, whenever this is possible. \(fn OBJECT)" nil nil) (autoload 'pp-buffer "pp" "\ Prettify the current buffer with printed representation of a Lisp object. \(fn)" nil nil) (autoload 'pp "pp" "\ Output the pretty-printed representation of OBJECT, any Lisp object. Quoting characters are printed as needed to make output that `read' can handle, whenever this is possible. Output stream is STREAM, or value of `standard-output' (which see). \(fn OBJECT &optional STREAM)" nil nil) (autoload 'pp-eval-expression "pp" "\ Evaluate EXPRESSION and pretty-print its value. Also add the value to the front of the list in the variable `values'. \(fn EXPRESSION)" t nil) (autoload 'pp-macroexpand-expression "pp" "\ Macroexpand EXPRESSION and pretty-print its value. \(fn EXPRESSION)" t nil) (autoload 'pp-eval-last-sexp "pp" "\ Run `pp-eval-expression' on sexp before point. With argument, pretty-print output into current buffer. Ignores leading comment characters. \(fn ARG)" t nil) (autoload 'pp-macroexpand-last-sexp "pp" "\ Run `pp-macroexpand-expression' on sexp before point. With argument, pretty-print output into current buffer. Ignores leading comment characters. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (pr-txt-fast-fire pr-ps-fast-fire pr-show-lpr-setup ;;;;;; pr-show-pr-setup pr-show-ps-setup pr-ps-utility pr-txt-name ;;;;;; pr-ps-name pr-help lpr-customize pr-customize pr-toggle-mode ;;;;;; pr-toggle-region pr-toggle-lock pr-toggle-header-frame pr-toggle-header ;;;;;; pr-toggle-zebra pr-toggle-line pr-toggle-upside-down pr-toggle-landscape ;;;;;; pr-toggle-tumble pr-toggle-duplex pr-toggle-spool pr-toggle-faces ;;;;;; pr-toggle-ghostscript pr-toggle-file-landscape pr-toggle-file-tumble ;;;;;; pr-toggle-file-duplex pr-ps-file-up-ps-print pr-ps-file-ps-print ;;;;;; pr-ps-file-print pr-ps-file-using-ghostscript pr-ps-file-up-preview ;;;;;; pr-ps-file-preview pr-despool-ps-print pr-despool-print pr-despool-using-ghostscript ;;;;;; pr-despool-preview pr-txt-mode pr-txt-region pr-txt-buffer ;;;;;; pr-txt-directory pr-printify-region pr-printify-buffer pr-printify-directory ;;;;;; pr-ps-mode-ps-print pr-ps-mode-print pr-ps-mode-using-ghostscript ;;;;;; pr-ps-mode-preview pr-ps-region-ps-print pr-ps-region-print ;;;;;; pr-ps-region-using-ghostscript pr-ps-region-preview pr-ps-buffer-ps-print ;;;;;; pr-ps-buffer-print pr-ps-buffer-using-ghostscript pr-ps-buffer-preview ;;;;;; pr-ps-directory-ps-print pr-ps-directory-print pr-ps-directory-using-ghostscript ;;;;;; pr-ps-directory-preview pr-interface) "printing" "printing.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from printing.el (autoload 'pr-interface "printing" "\ Activate the printing interface buffer. If BUFFER is nil, the current buffer is used for printing. For more information, type \\[pr-interface-help]. \(fn &optional BUFFER)" t nil) (autoload 'pr-ps-directory-preview "printing" "\ Preview directory using ghostview. Interactively, the command prompts for N-UP printing number, a directory, a file name regexp for matching and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of saving it in a temporary file. Noninteractively, if N-UP is nil, prompts for N-UP printing number. If DIR is nil, prompts for DIRectory. If FILE-REGEXP is nil, prompts for FILE(name)-REGEXP. The argument FILENAME is treated as follows: if it's nil, save the image in a temporary file. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. See also documentation for `pr-list-directory'. \(fn N-UP DIR FILE-REGEXP &optional FILENAME)" t nil) (autoload 'pr-ps-directory-using-ghostscript "printing" "\ Print directory using PostScript through ghostscript. Interactively, the command prompts for N-UP printing number, a directory, a file name regexp for matching and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of saving it in a temporary file. Noninteractively, if N-UP is nil, prompts for N-UP printing number. If DIR is nil, prompts for DIRectory. If FILE-REGEXP is nil, prompts for FILE(name)-REGEXP. The argument FILENAME is treated as follows: if it's nil, save the image in a temporary file. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. See also documentation for `pr-list-directory'. \(fn N-UP DIR FILE-REGEXP &optional FILENAME)" t nil) (autoload 'pr-ps-directory-print "printing" "\ Print directory using PostScript printer. Interactively, the command prompts for N-UP printing number, a directory, a file name regexp for matching and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of saving it in a temporary file. Noninteractively, if N-UP is nil, prompts for N-UP printing number. If DIR is nil, prompts for DIRectory. If FILE-REGEXP is nil, prompts for FILE(name)-REGEXP. The argument FILENAME is treated as follows: if it's nil, save the image in a temporary file. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. See also documentation for `pr-list-directory'. \(fn N-UP DIR FILE-REGEXP &optional FILENAME)" t nil) (autoload 'pr-ps-directory-ps-print "printing" "\ Print directory using PostScript printer or through ghostscript. It depends on `pr-print-using-ghostscript'. Interactively, the command prompts for N-UP printing number, a directory, a file name regexp for matching and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of saving it in a temporary file. Noninteractively, if N-UP is nil, prompts for N-UP printing number. If DIR is nil, prompts for DIRectory. If FILE-REGEXP is nil, prompts for FILE(name)-REGEXP. The argument FILENAME is treated as follows: if it's nil, save the image in a temporary file. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. See also documentation for `pr-list-directory'. \(fn N-UP DIR FILE-REGEXP &optional FILENAME)" t nil) (autoload 'pr-ps-buffer-preview "printing" "\ Preview buffer using ghostview. Interactively, the command prompts for N-UP printing number and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of saving it in a temporary file. Noninteractively, if N-UP is nil, prompts for N-UP printing number. The argument FILENAME is treated as follows: if it's nil, save the image in a temporary file. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-buffer-using-ghostscript "printing" "\ Print buffer using PostScript through ghostscript. Interactively, the command prompts for N-UP printing number and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of sending it to the printer. Noninteractively, if N-UP is nil, prompts for N-UP printing number. The argument FILENAME is treated as follows: if it's nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-buffer-print "printing" "\ Print buffer using PostScript printer. Interactively, the command prompts for N-UP printing number and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of sending it to the printer. Noninteractively, if N-UP is nil, prompts for N-UP printing number. The argument FILENAME is treated as follows: if it's nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-buffer-ps-print "printing" "\ Print buffer using PostScript printer or through ghostscript. It depends on `pr-print-using-ghostscript'. Interactively, the command prompts for N-UP printing number and, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the PostScript image in that file instead of sending it to the printer. Noninteractively, if N-UP is nil, prompts for N-UP printing number. The argument FILENAME is treated as follows: if it's nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. If FILENAME is t, prompts for a file name. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-region-preview "printing" "\ Preview region using ghostview. See also `pr-ps-buffer-preview'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-region-using-ghostscript "printing" "\ Print region using PostScript through ghostscript. See also `pr-ps-buffer-using-ghostscript'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-region-print "printing" "\ Print region using PostScript printer. See also `pr-ps-buffer-print'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-region-ps-print "printing" "\ Print region using PostScript printer or through ghostscript. See also `pr-ps-buffer-ps-print'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-mode-preview "printing" "\ Preview major mode using ghostview. See also `pr-ps-buffer-preview'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-mode-using-ghostscript "printing" "\ Print major mode using PostScript through ghostscript. See also `pr-ps-buffer-using-ghostscript'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-mode-print "printing" "\ Print major mode using PostScript printer. See also `pr-ps-buffer-print'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-ps-mode-ps-print "printing" "\ Print major mode using PostScript or through ghostscript. See also `pr-ps-buffer-ps-print'. \(fn N-UP &optional FILENAME)" t nil) (autoload 'pr-printify-directory "printing" "\ Replace nonprinting characters in directory with printable representations. The printable representations use ^ (for ASCII control characters) or hex. The characters tab, linefeed, space, return and formfeed are not affected. Interactively, the command prompts for a directory and a file name regexp for matching. Noninteractively, if DIR is nil, prompts for DIRectory. If FILE-REGEXP is nil, prompts for FILE(name)-REGEXP. See also documentation for `pr-list-directory'. \(fn &optional DIR FILE-REGEXP)" t nil) (autoload 'pr-printify-buffer "printing" "\ Replace nonprinting characters in buffer with printable representations. The printable representations use ^ (for ASCII control characters) or hex. The characters tab, linefeed, space, return and formfeed are not affected. \(fn)" t nil) (autoload 'pr-printify-region "printing" "\ Replace nonprinting characters in region with printable representations. The printable representations use ^ (for ASCII control characters) or hex. The characters tab, linefeed, space, return and formfeed are not affected. \(fn)" t nil) (autoload 'pr-txt-directory "printing" "\ Print directory using text printer. Interactively, the command prompts for a directory and a file name regexp for matching. Noninteractively, if DIR is nil, prompts for DIRectory. If FILE-REGEXP is nil, prompts for FILE(name)-REGEXP. See also documentation for `pr-list-directory'. \(fn &optional DIR FILE-REGEXP)" t nil) (autoload 'pr-txt-buffer "printing" "\ Print buffer using text printer. \(fn)" t nil) (autoload 'pr-txt-region "printing" "\ Print region using text printer. \(fn)" t nil) (autoload 'pr-txt-mode "printing" "\ Print major mode using text printer. \(fn)" t nil) (autoload 'pr-despool-preview "printing" "\ Preview spooled PostScript. Interactively, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the spooled PostScript image in that file instead of saving it in a temporary file. Noninteractively, the argument FILENAME is treated as follows: if it is nil, save the image in a temporary file. If FILENAME is a string, save the PostScript image in a file with that name. \(fn &optional FILENAME)" t nil) (autoload 'pr-despool-using-ghostscript "printing" "\ Print spooled PostScript using ghostscript. Interactively, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the spooled PostScript image in that file instead of sending it to the printer. Noninteractively, the argument FILENAME is treated as follows: if it is nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. \(fn &optional FILENAME)" t nil) (autoload 'pr-despool-print "printing" "\ Send the spooled PostScript to the printer. Interactively, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the spooled PostScript image in that file instead of sending it to the printer. Noninteractively, the argument FILENAME is treated as follows: if it is nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. \(fn &optional FILENAME)" t nil) (autoload 'pr-despool-ps-print "printing" "\ Send the spooled PostScript to the printer or use ghostscript to print it. Interactively, when you use a prefix argument (C-u), the command prompts the user for a file name, and saves the spooled PostScript image in that file instead of sending it to the printer. Noninteractively, the argument FILENAME is treated as follows: if it is nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. \(fn &optional FILENAME)" t nil) (autoload 'pr-ps-file-preview "printing" "\ Preview PostScript file FILENAME. \(fn FILENAME)" t nil) (autoload 'pr-ps-file-up-preview "printing" "\ Preview PostScript file FILENAME. \(fn N-UP IFILENAME &optional OFILENAME)" t nil) (autoload 'pr-ps-file-using-ghostscript "printing" "\ Print PostScript file FILENAME using ghostscript. \(fn FILENAME)" t nil) (autoload 'pr-ps-file-print "printing" "\ Print PostScript file FILENAME. \(fn FILENAME)" t nil) (autoload 'pr-ps-file-ps-print "printing" "\ Send PostScript file FILENAME to printer or use ghostscript to print it. \(fn FILENAME)" t nil) (autoload 'pr-ps-file-up-ps-print "printing" "\ Process a PostScript file IFILENAME and send it to printer. Interactively, the command prompts for N-UP printing number, for an input PostScript file IFILENAME and, when you use a prefix argument (C-u), the command prompts the user for an output PostScript file name OFILENAME, and saves the PostScript image in that file instead of sending it to the printer. Noninteractively, if N-UP is nil, prompts for N-UP printing number. The argument IFILENAME is treated as follows: if it's t, prompts for an input PostScript file name; otherwise, it *must* be a string that it's an input PostScript file name. The argument OFILENAME is treated as follows: if it's nil, send the image to the printer. If OFILENAME is a string, save the PostScript image in a file with that name. If OFILENAME is t, prompts for a file name. \(fn N-UP IFILENAME &optional OFILENAME)" t nil) (autoload 'pr-toggle-file-duplex "printing" "\ Toggle duplex for PostScript file. \(fn)" t nil) (autoload 'pr-toggle-file-tumble "printing" "\ Toggle tumble for PostScript file. If tumble is off, produces a printing suitable for binding on the left or right. If tumble is on, produces a printing suitable for binding at the top or bottom. \(fn)" t nil) (autoload 'pr-toggle-file-landscape "printing" "\ Toggle landscape for PostScript file. \(fn)" t nil) (autoload 'pr-toggle-ghostscript "printing" "\ Toggle printing using ghostscript. \(fn)" t nil) (autoload 'pr-toggle-faces "printing" "\ Toggle printing with faces. \(fn)" t nil) (autoload 'pr-toggle-spool "printing" "\ Toggle spooling. \(fn)" t nil) (autoload 'pr-toggle-duplex "printing" "\ Toggle duplex. \(fn)" t nil) (autoload 'pr-toggle-tumble "printing" "\ Toggle tumble. If tumble is off, produces a printing suitable for binding on the left or right. If tumble is on, produces a printing suitable for binding at the top or bottom. \(fn)" t nil) (autoload 'pr-toggle-landscape "printing" "\ Toggle landscape. \(fn)" t nil) (autoload 'pr-toggle-upside-down "printing" "\ Toggle upside-down. \(fn)" t nil) (autoload 'pr-toggle-line "printing" "\ Toggle line number. \(fn)" t nil) (autoload 'pr-toggle-zebra "printing" "\ Toggle zebra stripes. \(fn)" t nil) (autoload 'pr-toggle-header "printing" "\ Toggle printing header. \(fn)" t nil) (autoload 'pr-toggle-header-frame "printing" "\ Toggle printing header frame. \(fn)" t nil) (autoload 'pr-toggle-lock "printing" "\ Toggle menu lock. \(fn)" t nil) (autoload 'pr-toggle-region "printing" "\ Toggle auto region. \(fn)" t nil) (autoload 'pr-toggle-mode "printing" "\ Toggle auto mode. \(fn)" t nil) (autoload 'pr-customize "printing" "\ Customization of the `printing' group. \(fn &rest IGNORE)" t nil) (autoload 'lpr-customize "printing" "\ Customization of the `lpr' group. \(fn &rest IGNORE)" t nil) (autoload 'pr-help "printing" "\ Help for the printing package. \(fn &rest IGNORE)" t nil) (autoload 'pr-ps-name "printing" "\ Interactively select a PostScript printer. \(fn)" t nil) (autoload 'pr-txt-name "printing" "\ Interactively select a text printer. \(fn)" t nil) (autoload 'pr-ps-utility "printing" "\ Interactively select a PostScript utility. \(fn)" t nil) (autoload 'pr-show-ps-setup "printing" "\ Show current ps-print settings. \(fn &rest IGNORE)" t nil) (autoload 'pr-show-pr-setup "printing" "\ Show current printing settings. \(fn &rest IGNORE)" t nil) (autoload 'pr-show-lpr-setup "printing" "\ Show current lpr settings. \(fn &rest IGNORE)" t nil) (autoload 'pr-ps-fast-fire "printing" "\ Fast fire function for PostScript printing. If a region is active, the region will be printed instead of the whole buffer. Also if the current major-mode is defined in `pr-mode-alist', the settings in `pr-mode-alist' will be used, that is, the current buffer or region will be printed using `pr-ps-mode-ps-print'. Interactively, you have the following situations: M-x pr-ps-fast-fire RET The command prompts the user for a N-UP value and printing will immediatelly be done using the current active printer. C-u M-x pr-ps-fast-fire RET C-u 0 M-x pr-ps-fast-fire RET The command prompts the user for a N-UP value and also for a current PostScript printer, then printing will immediatelly be done using the new current active printer. C-u 1 M-x pr-ps-fast-fire RET The command prompts the user for a N-UP value and also for a file name, and saves the PostScript image in that file instead of sending it to the printer. C-u 2 M-x pr-ps-fast-fire RET The command prompts the user for a N-UP value, then for a current PostScript printer and, finally, for a file name. Then change the active printer to that chosen by user and saves the PostScript image in that file instead of sending it to the printer. Noninteractively, the argument N-UP should be a positive integer greater than zero and the argument SELECT is treated as follows: If it's nil, send the image to the printer. If it's a list or an integer lesser or equal to zero, the command prompts the user for a current PostScript printer, then printing will immediatelly be done using the new current active printer. If it's an integer equal to 1, the command prompts the user for a file name and saves the PostScript image in that file instead of sending it to the printer. If it's an integer greater or equal to 2, the command prompts the user for a current PostScript printer and for a file name. Then change the active printer to that chosen by user and saves the PostScript image in that file instead of sending it to the printer. If it's a symbol which it's defined in `pr-ps-printer-alist', it's the new active printer and printing will immediatelly be done using the new active printer. Otherwise, send the image to the printer. Note that this command always behaves as if `pr-auto-region' and `pr-auto-mode' are both set to t. \(fn N-UP &optional SELECT)" t nil) (autoload 'pr-txt-fast-fire "printing" "\ Fast fire function for text printing. If a region is active, the region will be printed instead of the whole buffer. Also if the current major-mode is defined in `pr-mode-alist', the settings in `pr-mode-alist' will be used, that is, the current buffer or region will be printed using `pr-txt-mode'. Interactively, when you use a prefix argument (C-u), the command prompts the user for a new active text printer. Noninteractively, the argument SELECT-PRINTER is treated as follows: If it's nil, the printing is sent to the current active text printer. If it's a symbol which it's defined in `pr-txt-printer-alist', it's the new active printer and printing will immediatelly be done using the new active printer. If it's non-nil, the command prompts the user for a new active text printer. Note that this command always behaves as if `pr-auto-region' and `pr-auto-mode' are both set to t. \(fn &optional SELECT-PRINTER)" t nil) ;;;*** ;;;### (autoloads (proced) "proced" "proced.el" (19259 35428)) ;;; Generated autoloads from proced.el (autoload 'proced "proced" "\ Generate a listing of UNIX system processes. If invoked with optional ARG the window displaying the process information will be displayed but not selected. Runs the normal hook `proced-post-display-hook'. See `proced-mode' for a description of features available in Proced buffers. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (switch-to-prolog prolog-mode) "prolog" "progmodes/prolog.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from progmodes/prolog.el (autoload 'prolog-mode "prolog" "\ Major mode for editing Prolog code for Prologs. Blank lines and `%%...' separate paragraphs. `%'s start comments. Commands: \\{prolog-mode-map} Entry to this mode calls the value of `prolog-mode-hook' if that value is non-nil. \(fn)" t nil) (defalias 'run-prolog 'switch-to-prolog) (autoload 'switch-to-prolog "prolog" "\ Run an inferior Prolog process, input and output via buffer *prolog*. With prefix argument \\[universal-prefix], prompt for the program to use. \(fn &optional NAME)" t nil) ;;;*** ;;;### (autoloads (bdf-directory-list) "ps-bdf" "ps-bdf.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from ps-bdf.el (defvar bdf-directory-list (if (memq system-type '(ms-dos windows-nt)) (list (expand-file-name "fonts/bdf" installation-directory)) '("/usr/local/share/emacs/fonts/bdf")) "\ List of directories to search for `BDF' font files. The default value is '(\"/usr/local/share/emacs/fonts/bdf\").") (custom-autoload 'bdf-directory-list "ps-bdf" t) ;;;*** ;;;### (autoloads (ps-mode) "ps-mode" "progmodes/ps-mode.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from progmodes/ps-mode.el (autoload 'ps-mode "ps-mode" "\ Major mode for editing PostScript with GNU Emacs. Entry to this mode calls `ps-mode-hook'. The following variables hold user options, and can be set through the `customize' command: `ps-mode-auto-indent' `ps-mode-tab' `ps-mode-paper-size' `ps-mode-print-function' `ps-run-prompt' `ps-run-font-lock-keywords-2' `ps-run-x' `ps-run-dumb' `ps-run-init' `ps-run-error-line-numbers' `ps-run-tmp-dir' Type \\[describe-variable] for documentation on these options. \\{ps-mode-map} When starting an interactive PostScript process with \\[ps-run-start], a second window will be displayed, and `ps-run-mode-hook' will be called. The keymap for this second window is: \\{ps-run-mode-map} When Ghostscript encounters an error it displays an error message with a file position. Clicking mouse-2 on this number will bring point to the corresponding spot in the PostScript window, if input to the interpreter was sent from that window. Typing \\<ps-run-mode-map>\\[ps-run-goto-error] when the cursor is at the number has the same effect. \(fn)" t nil) ;;;*** ;;;### (autoloads (ps-extend-face ps-extend-face-list ps-setup ps-nb-pages-region ;;;;;; ps-nb-pages-buffer ps-line-lengths ps-despool ps-spool-region-with-faces ;;;;;; ps-spool-region ps-spool-buffer-with-faces ps-spool-buffer ;;;;;; ps-print-region-with-faces ps-print-region ps-print-buffer-with-faces ;;;;;; ps-print-buffer ps-print-customize ps-print-color-p ps-paper-type ;;;;;; ps-page-dimensions-database) "ps-print" "ps-print.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from ps-print.el (defvar ps-page-dimensions-database (purecopy (list (list 'a4 (/ (* 72 21.0) 2.54) (/ (* 72 29.7) 2.54) "A4") (list 'a3 (/ (* 72 29.7) 2.54) (/ (* 72 42.0) 2.54) "A3") (list 'letter (* 72 8.5) (* 72 11.0) "Letter") (list 'legal (* 72 8.5) (* 72 14.0) "Legal") (list 'letter-small (* 72 7.68) (* 72 10.16) "LetterSmall") (list 'tabloid (* 72 11.0) (* 72 17.0) "Tabloid") (list 'ledger (* 72 17.0) (* 72 11.0) "Ledger") (list 'statement (* 72 5.5) (* 72 8.5) "Statement") (list 'executive (* 72 7.5) (* 72 10.0) "Executive") (list 'a4small (* 72 7.47) (* 72 10.85) "A4Small") (list 'b4 (* 72 10.125) (* 72 14.33) "B4") (list 'b5 (* 72 7.16) (* 72 10.125) "B5") '(addresslarge 236.0 99.0 "AddressLarge") '(addresssmall 236.0 68.0 "AddressSmall") '(cuthanging13 90.0 222.0 "CutHanging13") '(cuthanging15 90.0 114.0 "CutHanging15") '(diskette 181.0 136.0 "Diskette") '(eurofilefolder 139.0 112.0 "EuropeanFilefolder") '(eurofoldernarrow 526.0 107.0 "EuroFolderNarrow") '(eurofolderwide 526.0 136.0 "EuroFolderWide") '(euronamebadge 189.0 108.0 "EuroNameBadge") '(euronamebadgelarge 223.0 136.0 "EuroNameBadgeLarge") '(filefolder 230.0 37.0 "FileFolder") '(jewelry 76.0 136.0 "Jewelry") '(mediabadge 180.0 136.0 "MediaBadge") '(multipurpose 126.0 68.0 "MultiPurpose") '(retaillabel 90.0 104.0 "RetailLabel") '(shipping 271.0 136.0 "Shipping") '(slide35mm 26.0 104.0 "Slide35mm") '(spine8mm 187.0 26.0 "Spine8mm") '(topcoated 425.19685 136.0 "TopCoatedPaper") '(topcoatedpaper 396.0 136.0 "TopcoatedPaper150") '(vhsface 205.0 127.0 "VHSFace") '(vhsspine 400.0 50.0 "VHSSpine") '(zipdisk 156.0 136.0 "ZipDisk"))) "\ List associating a symbolic paper type to its width, height and doc media. See `ps-paper-type'.") (custom-autoload 'ps-page-dimensions-database "ps-print" t) (defvar ps-paper-type 'letter "\ Specify the size of paper to format for. Should be one of the paper types defined in `ps-page-dimensions-database', for example `letter', `legal' or `a4'.") (custom-autoload 'ps-paper-type "ps-print" t) (defvar ps-print-color-p (or (fboundp 'x-color-values) (fboundp 'color-instance-rgb-components)) "\ Specify how buffer's text color is printed. Valid values are: nil Do not print colors. t Print colors. black-white Print colors on black/white printer. See also `ps-black-white-faces'. Any other value is treated as t.") (custom-autoload 'ps-print-color-p "ps-print" t) (autoload 'ps-print-customize "ps-print" "\ Customization of ps-print group. \(fn)" t nil) (autoload 'ps-print-buffer "ps-print" "\ Generate and print a PostScript image of the buffer. Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves the PostScript image in that file instead of sending it to the printer. Noninteractively, the argument FILENAME is treated as follows: if it is nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. \(fn &optional FILENAME)" t nil) (autoload 'ps-print-buffer-with-faces "ps-print" "\ Generate and print a PostScript image of the buffer. Like `ps-print-buffer', but includes font, color, and underline information in the generated image. This command works only if you are using a window system, so it has a way to determine color values. \(fn &optional FILENAME)" t nil) (autoload 'ps-print-region "ps-print" "\ Generate and print a PostScript image of the region. Like `ps-print-buffer', but prints just the current region. \(fn FROM TO &optional FILENAME)" t nil) (autoload 'ps-print-region-with-faces "ps-print" "\ Generate and print a PostScript image of the region. Like `ps-print-region', but includes font, color, and underline information in the generated image. This command works only if you are using a window system, so it has a way to determine color values. \(fn FROM TO &optional FILENAME)" t nil) (autoload 'ps-spool-buffer "ps-print" "\ Generate and spool a PostScript image of the buffer. Like `ps-print-buffer' except that the PostScript image is saved in a local buffer to be sent to the printer later. Use the command `ps-despool' to send the spooled images to the printer. \(fn)" t nil) (autoload 'ps-spool-buffer-with-faces "ps-print" "\ Generate and spool a PostScript image of the buffer. Like `ps-spool-buffer', but includes font, color, and underline information in the generated image. This command works only if you are using a window system, so it has a way to determine color values. Use the command `ps-despool' to send the spooled images to the printer. \(fn)" t nil) (autoload 'ps-spool-region "ps-print" "\ Generate a PostScript image of the region and spool locally. Like `ps-spool-buffer', but spools just the current region. Use the command `ps-despool' to send the spooled images to the printer. \(fn FROM TO)" t nil) (autoload 'ps-spool-region-with-faces "ps-print" "\ Generate a PostScript image of the region and spool locally. Like `ps-spool-region', but includes font, color, and underline information in the generated image. This command works only if you are using a window system, so it has a way to determine color values. Use the command `ps-despool' to send the spooled images to the printer. \(fn FROM TO)" t nil) (autoload 'ps-despool "ps-print" "\ Send the spooled PostScript to the printer. Interactively, when you use a prefix argument (\\[universal-argument]), the command prompts the user for a file name, and saves the spooled PostScript image in that file instead of sending it to the printer. Noninteractively, the argument FILENAME is treated as follows: if it is nil, send the image to the printer. If FILENAME is a string, save the PostScript image in a file with that name. \(fn &optional FILENAME)" t nil) (autoload 'ps-line-lengths "ps-print" "\ Display the correspondence between a line length and a font size. Done using the current ps-print setup. Try: pr -t file | awk '{printf \"%3d %s \", length($0), $0}' | sort -r | head \(fn)" t nil) (autoload 'ps-nb-pages-buffer "ps-print" "\ Display number of pages to print this buffer, for various font heights. The table depends on the current ps-print setup. \(fn NB-LINES)" t nil) (autoload 'ps-nb-pages-region "ps-print" "\ Display number of pages to print the region, for various font heights. The table depends on the current ps-print setup. \(fn NB-LINES)" t nil) (autoload 'ps-setup "ps-print" "\ Return the current PostScript-generation setup. \(fn)" nil nil) (autoload 'ps-extend-face-list "ps-print" "\ Extend face in ALIST-SYM. If optional MERGE-P is non-nil, extensions in FACE-EXTENSION-LIST are merged with face extension in ALIST-SYM; otherwise, overrides. If optional ALIST-SYM is nil, `ps-print-face-extension-alist' is used; otherwise, it should be an alist symbol. The elements in FACE-EXTENSION-LIST are like those for `ps-extend-face'. See `ps-extend-face' for documentation. \(fn FACE-EXTENSION-LIST &optional MERGE-P ALIST-SYM)" nil nil) (autoload 'ps-extend-face "ps-print" "\ Extend face in ALIST-SYM. If optional MERGE-P is non-nil, extensions in FACE-EXTENSION list are merged with face extensions in ALIST-SYM; otherwise, overrides. If optional ALIST-SYM is nil, `ps-print-face-extension-alist' is used; otherwise, it should be an alist symbol. The elements of FACE-EXTENSION list have the form: (FACE-NAME FOREGROUND BACKGROUND EXTENSION...) FACE-NAME is a face name symbol. FOREGROUND and BACKGROUND may be nil or a string that denotes the foreground and background colors respectively. EXTENSION is one of the following symbols: bold - use bold font. italic - use italic font. underline - put a line under text. strikeout - like underline, but the line is in middle of text. overline - like underline, but the line is over the text. shadow - text will have a shadow. box - text will be surrounded by a box. outline - print characters as hollow outlines. If EXTENSION is any other symbol, it is ignored. \(fn FACE-EXTENSION &optional MERGE-P ALIST-SYM)" nil nil) ;;;*** ;;;### (autoloads (python-shell jython-mode python-mode run-python) ;;;;;; "python" "progmodes/python.el" (19259 35428)) ;;; Generated autoloads from progmodes/python.el (add-to-list 'interpreter-mode-alist (cons (purecopy "jython") 'jython-mode)) (add-to-list 'interpreter-mode-alist (cons (purecopy "python") 'python-mode)) (add-to-list 'auto-mode-alist (cons (purecopy "\\.py\\'") 'python-mode)) (autoload 'run-python "python" "\ Run an inferior Python process, input and output via buffer *Python*. CMD is the Python command to run. NOSHOW non-nil means don't show the buffer automatically. Normally, if there is a process already running in `python-buffer', switch to that buffer. Interactively, a prefix arg allows you to edit the initial command line (default is `python-command'); `-i' etc. args will be added to this as appropriate. A new process is started if: one isn't running attached to `python-buffer', or interactively the default `python-command', or argument NEW is non-nil. See also the documentation for `python-buffer'. Runs the hook `inferior-python-mode-hook' (after the `comint-mode-hook' is run). (Type \\[describe-mode] in the process buffer for a list of commands.) \(fn &optional CMD NOSHOW NEW)" t nil) (autoload 'python-mode "python" "\ Major mode for editing Python files. Turns on Font Lock mode unconditionally since it is currently required for correct parsing of the source. See also `jython-mode', which is actually invoked if the buffer appears to contain Jython code. See also `run-python' and associated Python mode commands for running Python under Emacs. The Emacs commands which work with `defun's, e.g. \\[beginning-of-defun], deal with nested `def' and `class' blocks. They take the innermost one as current without distinguishing method and class definitions. Used multiple times, they move over others at the same indentation level until they reach the end of definitions at that level, when they move up a level. \\<python-mode-map> Colon is electric: it outdents the line if appropriate, e.g. for an else statement. \\[python-backspace] at the beginning of an indented statement deletes a level of indentation to close the current block; otherwise it deletes a character backward. TAB indents the current line relative to the preceding code. Successive TABs, with no intervening command, cycle through the possibilities for indentation on the basis of enclosing blocks. \\[fill-paragraph] fills comments and multi-line strings appropriately, but has no effect outside them. Supports Eldoc mode (only for functions, using a Python process), Info-Look and Imenu. In Outline minor mode, `class' and `def' lines count as headers. Symbol completion is available in the same way as in the Python shell using the `rlcompleter' module and this is added to the Hippie Expand functions locally if Hippie Expand mode is turned on. Completion of symbols of the form x.y only works if the components are literal module/attribute names, not variables. An abbrev table is set up with skeleton expansions for compound statement templates. \\{python-mode-map} \(fn)" t nil) (autoload 'jython-mode "python" "\ Major mode for editing Jython files. Like `python-mode', but sets up parameters for Jython subprocesses. Runs `jython-mode-hook' after `python-mode-hook'. \(fn)" t nil) (autoload 'python-shell "python" "\ Start an interactive Python interpreter in another window. This is like Shell mode, except that Python is running in the window instead of a shell. See the `Interactive Shell' and `Shell Mode' sections of the Emacs manual for details, especially for the key bindings active in the `*Python*' buffer. With optional \\[universal-argument], the user is prompted for the flags to pass to the Python interpreter. This has no effect when this command is used to switch to an existing process, only when a new process is started. If you use this, you will probably want to ensure that the current arguments are retained (they will be included in the prompt). This argument is ignored when this function is called programmatically, or when running in Emacs 19.34 or older. Note: You can toggle between using the CPython interpreter and the JPython interpreter by hitting \\[python-toggle-shells]. This toggles buffer local variables which control whether all your subshell interactions happen to the `*JPython*' or `*Python*' buffers (the latter is the name used for the CPython buffer). Warning: Don't use an interactive Python if you change sys.ps1 or sys.ps2 from their default values, or if you're running code that prints `>>> ' or `... ' at the start of a line. `python-mode' can't distinguish your output from Python's output, and assumes that `>>> ' at the start of a line is a prompt from Python. Similarly, the Emacs Shell mode code assumes that both `>>> ' and `... ' at the start of a line are Python prompts. Bad things can happen if you fool either mode. Warning: If you do any editing *in* the process buffer *while* the buffer is accepting output from Python, do NOT attempt to `undo' the changes. Some of the output (nowhere near the parts you changed!) may be lost if you do. This appears to be an Emacs bug, an unfortunate interaction between undo and process filters; the same problem exists in non-Python process buffers using the default (Emacs-supplied) process filter. \(fn &optional ARGPROMPT)" t nil) ;;;*** ;;;### (autoloads (quoted-printable-decode-region) "qp" "gnus/qp.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from gnus/qp.el (autoload 'quoted-printable-decode-region "qp" "\ Decode quoted-printable in the region between FROM and TO, per RFC 2045. If CODING-SYSTEM is non-nil, decode bytes into characters with that coding-system. Interactively, you can supply the CODING-SYSTEM argument with \\[universal-coding-system-argument]. The CODING-SYSTEM argument is a historical hangover and is deprecated. QP encodes raw bytes and should be decoded into raw bytes. Decoding them into characters should be done separately. \(fn FROM TO &optional CODING-SYSTEM)" t nil) ;;;*** ;;;### (autoloads (quail-update-leim-list-file quail-defrule-internal ;;;;;; quail-defrule quail-install-decode-map quail-install-map ;;;;;; quail-define-rules quail-show-keyboard-layout quail-set-keyboard-layout ;;;;;; quail-define-package quail-use-package quail-title) "quail" ;;;;;; "international/quail.el" (19259 35428)) ;;; Generated autoloads from international/quail.el (autoload 'quail-title "quail" "\ Return the title of the current Quail package. \(fn)" nil nil) (autoload 'quail-use-package "quail" "\ Start using Quail package PACKAGE-NAME. The remaining arguments are LIBRARIES to be loaded before using the package. This activates input method defined by PACKAGE-NAME by running `quail-activate', which see. \(fn PACKAGE-NAME &rest LIBRARIES)" nil nil) (autoload 'quail-define-package "quail" "\ Define NAME as a new Quail package for input LANGUAGE. TITLE is a string to be displayed at mode-line to indicate this package. Optional arguments are GUIDANCE, DOCSTRING, TRANSLATION-KEYS, FORGET-LAST-SELECTION, DETERMINISTIC, KBD-TRANSLATE, SHOW-LAYOUT, CREATE-DECODE-MAP, MAXIMUM-SHORTEST, OVERLAY-PLIST, UPDATE-TRANSLATION-FUNCTION, CONVERSION-KEYS and SIMPLE. GUIDANCE specifies how a guidance string is shown in echo area. If it is t, list of all possible translations for the current key is shown with the currently selected translation being highlighted. If it is an alist, the element has the form (CHAR . STRING). Each character in the current key is searched in the list and the corresponding string is shown. If it is nil, the current key is shown. DOCSTRING is the documentation string of this package. The command `describe-input-method' shows this string while replacing the form \\=\\<VAR> in the string by the value of VAR. That value should be a string. For instance, the form \\=\\<quail-translation-docstring> is replaced by a description about how to select a translation from a list of candidates. TRANSLATION-KEYS specifies additional key bindings used while translation region is active. It is an alist of single key character vs. corresponding command to be called. FORGET-LAST-SELECTION non-nil means a selected translation is not kept for the future to translate the same key. If this flag is nil, a translation selected for a key is remembered so that it can be the first candidate when the same key is entered later. DETERMINISTIC non-nil means the first candidate of translation is selected automatically without allowing users to select another translation for a key. In this case, unselected translations are of no use for an interactive use of Quail but can be used by some other programs. If this flag is non-nil, FORGET-LAST-SELECTION is also set to t. KBD-TRANSLATE non-nil means input characters are translated from a user's keyboard layout to the standard keyboard layout. See the documentation of `quail-keyboard-layout' and `quail-keyboard-layout-standard' for more detail. SHOW-LAYOUT non-nil means the `quail-help' command should show the user's keyboard layout visually with translated characters. If KBD-TRANSLATE is set, it is desirable to set also this flag unless this package defines no translations for single character keys. CREATE-DECODE-MAP non-nil means decode map is also created. A decode map is an alist of translations and corresponding original keys. Although this map is not used by Quail itself, it can be used by some other programs. For instance, Vietnamese supporting needs this map to convert Vietnamese text to VIQR format which uses only ASCII characters to represent Vietnamese characters. MAXIMUM-SHORTEST non-nil means break key sequence to get maximum length of the shortest sequence. When we don't have a translation of key \"..ABCD\" but have translations of \"..AB\" and \"CD..\", break the key at \"..AB\" and start translation of \"CD..\". Hangul packages, for instance, use this facility. If this flag is nil, we break the key just at \"..ABC\" and start translation of \"D..\". OVERLAY-PLIST if non-nil is a property list put on an overlay which covers Quail translation region. UPDATE-TRANSLATION-FUNCTION if non-nil is a function to call to update the current translation region according to a new translation data. By default, a translated text or a user's key sequence (if no translation for it) is inserted. CONVERSION-KEYS specifies additional key bindings used while conversion region is active. It is an alist of single key character vs. corresponding command to be called. If SIMPLE is non-nil, then we do not alter the meanings of commands such as C-f, C-b, C-n, C-p and TAB; they are treated as non-Quail commands. \(fn NAME LANGUAGE TITLE &optional GUIDANCE DOCSTRING TRANSLATION-KEYS FORGET-LAST-SELECTION DETERMINISTIC KBD-TRANSLATE SHOW-LAYOUT CREATE-DECODE-MAP MAXIMUM-SHORTEST OVERLAY-PLIST UPDATE-TRANSLATION-FUNCTION CONVERSION-KEYS SIMPLE)" nil nil) (autoload 'quail-set-keyboard-layout "quail" "\ Set the current keyboard layout to the same as keyboard KBD-TYPE. Since some Quail packages depends on a physical layout of keys (not characters generated by them), those are created by assuming the standard layout defined in `quail-keyboard-layout-standard'. This function tells Quail system the layout of your keyboard so that what you type is correctly handled. \(fn KBD-TYPE)" t nil) (autoload 'quail-show-keyboard-layout "quail" "\ Show the physical layout of the keyboard type KEYBOARD-TYPE. The variable `quail-keyboard-layout-type' holds the currently selected keyboard type. \(fn &optional KEYBOARD-TYPE)" t nil) (autoload 'quail-define-rules "quail" "\ Define translation rules of the current Quail package. Each argument is a list of KEY and TRANSLATION. KEY is a string meaning a sequence of keystrokes to be translated. TRANSLATION is a character, a string, a vector, a Quail map, or a function. If it is a character, it is the sole translation of KEY. If it is a string, each character is a candidate for the translation. If it is a vector, each element (string or character) is a candidate for the translation. In these cases, a key specific Quail map is generated and assigned to KEY. If TRANSLATION is a Quail map or a function symbol which returns a Quail map, it is used to handle KEY. The first argument may be an alist of annotations for the following rules. Each element has the form (ANNOTATION . VALUE), where ANNOTATION is a symbol indicating the annotation type. Currently the following annotation types are supported. append -- the value non-nil means that the following rules should be appended to the rules of the current Quail package. face -- the value is a face to use for displaying TRANSLATIONs in candidate list. advice -- the value is a function to call after one of RULES is selected. The function is called with one argument, the selected TRANSLATION string, after the TRANSLATION is inserted. no-decode-map --- the value non-nil means that decoding map is not generated for the following translations. \(fn &rest RULES)" nil (quote macro)) (autoload 'quail-install-map "quail" "\ Install the Quail map MAP in the current Quail package. Optional 2nd arg NAME, if non-nil, is a name of Quail package for which to install MAP. The installed map can be referred by the function `quail-map'. \(fn MAP &optional NAME)" nil nil) (autoload 'quail-install-decode-map "quail" "\ Install the Quail decode map DECODE-MAP in the current Quail package. Optional 2nd arg NAME, if non-nil, is a name of Quail package for which to install MAP. The installed decode map can be referred by the function `quail-decode-map'. \(fn DECODE-MAP &optional NAME)" nil nil) (autoload 'quail-defrule "quail" "\ Add one translation rule, KEY to TRANSLATION, in the current Quail package. KEY is a string meaning a sequence of keystrokes to be translated. TRANSLATION is a character, a string, a vector, a Quail map, a function, or a cons. It it is a character, it is the sole translation of KEY. If it is a string, each character is a candidate for the translation. If it is a vector, each element (string or character) is a candidate for the translation. If it is a cons, the car is one of the above and the cdr is a function to call when translating KEY (the return value is assigned to the variable `quail-current-data'). If the cdr part is not a function, the value itself is assigned to `quail-current-data'. In these cases, a key specific Quail map is generated and assigned to KEY. If TRANSLATION is a Quail map or a function symbol which returns a Quail map, it is used to handle KEY. Optional 3rd argument NAME, if specified, says which Quail package to define this translation rule in. The default is to define it in the current Quail package. Optional 4th argument APPEND, if non-nil, appends TRANSLATION to the current translations for KEY instead of replacing them. \(fn KEY TRANSLATION &optional NAME APPEND)" nil nil) (autoload 'quail-defrule-internal "quail" "\ Define KEY as TRANS in a Quail map MAP. If Optional 4th arg APPEND is non-nil, TRANS is appended to the current translations for KEY instead of replacing them. Optional 5th arg DECODE-MAP is a Quail decode map. Optional 6th arg PROPS is a property list annotating TRANS. See the function `quail-define-rules' for the detail. \(fn KEY TRANS MAP &optional APPEND DECODE-MAP PROPS)" nil nil) (autoload 'quail-update-leim-list-file "quail" "\ Update entries for Quail packages in `LEIM' list file in directory DIRNAME. DIRNAME is a directory containing Emacs input methods; normally, it should specify the `leim' subdirectory of the Emacs source tree. It searches for Quail packages under `quail' subdirectory of DIRNAME, and update the file \"leim-list.el\" in DIRNAME. When called from a program, the remaining arguments are additional directory names to search for Quail packages under `quail' subdirectory of each directory. \(fn DIRNAME &rest DIRNAMES)" t nil) ;;;*** ;;;### (autoloads (quickurl-list quickurl-list-mode quickurl-edit-urls ;;;;;; quickurl-browse-url-ask quickurl-browse-url quickurl-add-url ;;;;;; quickurl-ask quickurl) "quickurl" "net/quickurl.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from net/quickurl.el (defconst quickurl-reread-hook-postfix "\n;; Local Variables:\n;; eval: (progn (require 'quickurl) (add-hook 'local-write-file-hooks (lambda () (quickurl-read) nil)))\n;; End:\n" "\ Example `quickurl-postfix' text that adds a local variable to the `quickurl-url-file' so that if you edit it by hand it will ensure that `quickurl-urls' is updated with the new URL list. To make use of this do something like: (setq quickurl-postfix quickurl-reread-hook-postfix) in your ~/.emacs (after loading/requiring quickurl).") (autoload 'quickurl "quickurl" "\ Insert an URL based on LOOKUP. If not supplied LOOKUP is taken to be the word at point in the current buffer, this default action can be modifed via `quickurl-grab-lookup-function'. \(fn &optional LOOKUP)" t nil) (autoload 'quickurl-ask "quickurl" "\ Insert an URL, with `completing-read' prompt, based on LOOKUP. \(fn LOOKUP)" t nil) (autoload 'quickurl-add-url "quickurl" "\ Allow the user to interactively add a new URL associated with WORD. See `quickurl-grab-url' for details on how the default word/url combination is decided. \(fn WORD URL COMMENT)" t nil) (autoload 'quickurl-browse-url "quickurl" "\ Browse the URL associated with LOOKUP. If not supplied LOOKUP is taken to be the word at point in the current buffer, this default action can be modifed via `quickurl-grab-lookup-function'. \(fn &optional LOOKUP)" t nil) (autoload 'quickurl-browse-url-ask "quickurl" "\ Browse the URL, with `completing-read' prompt, associated with LOOKUP. \(fn LOOKUP)" t nil) (autoload 'quickurl-edit-urls "quickurl" "\ Pull `quickurl-url-file' into a buffer for hand editing. \(fn)" t nil) (autoload 'quickurl-list-mode "quickurl" "\ A mode for browsing the quickurl URL list. The key bindings for `quickurl-list-mode' are: \\{quickurl-list-mode-map} \(fn)" t nil) (autoload 'quickurl-list "quickurl" "\ Display `quickurl-list' as a formatted list using `quickurl-list-mode'. \(fn)" t nil) ;;;*** ;;;### (autoloads (rcirc-track-minor-mode rcirc-connect rcirc) "rcirc" ;;;;;; "net/rcirc.el" (19259 35428)) ;;; Generated autoloads from net/rcirc.el (autoload 'rcirc "rcirc" "\ Connect to all servers in `rcirc-server-alist'. Do not connect to a server if it is already connected. If ARG is non-nil, instead prompt for connection parameters. \(fn ARG)" t nil) (defalias 'irc 'rcirc) (autoload 'rcirc-connect "rcirc" "\ Not documented \(fn SERVER &optional PORT NICK USER-NAME FULL-NAME STARTUP-CHANNELS)" nil nil) (defvar rcirc-track-minor-mode nil "\ Non-nil if Rcirc-Track minor mode is enabled. See the command `rcirc-track-minor-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `rcirc-track-minor-mode'.") (custom-autoload 'rcirc-track-minor-mode "rcirc" nil) (autoload 'rcirc-track-minor-mode "rcirc" "\ Global minor mode for tracking activity in rcirc buffers. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (remote-compile) "rcompile" "net/rcompile.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from net/rcompile.el (autoload 'remote-compile "rcompile" "\ Compile the current buffer's directory on HOST. Log in as USER. See \\[compile]. \(fn HOST USER COMMAND)" t nil) ;;;*** ;;;### (autoloads (re-builder) "re-builder" "emacs-lisp/re-builder.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from emacs-lisp/re-builder.el (defalias 'regexp-builder 're-builder) (autoload 're-builder "re-builder" "\ Construct a regexp interactively. \(fn)" t nil) ;;;*** ;;;### (autoloads (recentf-mode) "recentf" "recentf.el" (19259 35428)) ;;; Generated autoloads from recentf.el (defvar recentf-mode nil "\ Non-nil if Recentf mode is enabled. See the command `recentf-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `recentf-mode'.") (custom-autoload 'recentf-mode "recentf" nil) (autoload 'recentf-mode "recentf" "\ Toggle recentf mode. With prefix argument ARG, turn on if positive, otherwise off. Returns non-nil if the new state is enabled. When recentf mode is enabled, it maintains a menu for visiting files that were operated on recently. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (clear-rectangle string-insert-rectangle string-rectangle ;;;;;; delete-whitespace-rectangle open-rectangle insert-rectangle ;;;;;; yank-rectangle kill-rectangle extract-rectangle delete-extract-rectangle ;;;;;; delete-rectangle move-to-column-force) "rect" "rect.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from rect.el (define-key ctl-x-r-map "c" 'clear-rectangle) (define-key ctl-x-r-map "k" 'kill-rectangle) (define-key ctl-x-r-map "d" 'delete-rectangle) (define-key ctl-x-r-map "y" 'yank-rectangle) (define-key ctl-x-r-map "o" 'open-rectangle) (define-key ctl-x-r-map "t" 'string-rectangle) (autoload 'move-to-column-force "rect" "\ If COLUMN is within a multi-column character, replace it by spaces and tab. As for `move-to-column', passing anything but nil or t in FLAG will move to the desired column only if the line is long enough. \(fn COLUMN &optional FLAG)" nil nil) (make-obsolete 'move-to-column-force 'move-to-column "21.2") (autoload 'delete-rectangle "rect" "\ Delete (don't save) text in the region-rectangle. The same range of columns is deleted in each line starting with the line where the region begins and ending with the line where the region ends. When called from a program the rectangle's corners are START and END. With a prefix (or a FILL) argument, also fill lines where nothing has to be deleted. \(fn START END &optional FILL)" t nil) (autoload 'delete-extract-rectangle "rect" "\ Delete the contents of the rectangle with corners at START and END. Return it as a list of strings, one for each line of the rectangle. When called from a program the rectangle's corners are START and END. With an optional FILL argument, also fill lines where nothing has to be deleted. \(fn START END &optional FILL)" nil nil) (autoload 'extract-rectangle "rect" "\ Return the contents of the rectangle with corners at START and END. Return it as a list of strings, one for each line of the rectangle. \(fn START END)" nil nil) (autoload 'kill-rectangle "rect" "\ Delete the region-rectangle and save it as the last killed one. When called from a program the rectangle's corners are START and END. You might prefer to use `delete-extract-rectangle' from a program. With a prefix (or a FILL) argument, also fill lines where nothing has to be deleted. If the buffer is read-only, Emacs will beep and refrain from deleting the rectangle, but put it in the kill ring anyway. This means that you can use this command to copy text from a read-only buffer. \(If the variable `kill-read-only-ok' is non-nil, then this won't even beep.) \(fn START END &optional FILL)" t nil) (autoload 'yank-rectangle "rect" "\ Yank the last killed rectangle with upper left corner at point. \(fn)" t nil) (autoload 'insert-rectangle "rect" "\ Insert text of RECTANGLE with upper left corner at point. RECTANGLE's first line is inserted at point, its second line is inserted at a point vertically under point, etc. RECTANGLE should be a list of strings. After this command, the mark is at the upper left corner and point is at the lower right corner. \(fn RECTANGLE)" nil nil) (autoload 'open-rectangle "rect" "\ Blank out the region-rectangle, shifting text right. The text previously in the region is not overwritten by the blanks, but instead winds up to the right of the rectangle. When called from a program the rectangle's corners are START and END. With a prefix (or a FILL) argument, fill with blanks even if there is no text on the right side of the rectangle. \(fn START END &optional FILL)" t nil) (defalias 'close-rectangle 'delete-whitespace-rectangle) (autoload 'delete-whitespace-rectangle "rect" "\ Delete all whitespace following a specified column in each line. The left edge of the rectangle specifies the position in each line at which whitespace deletion should begin. On each line in the rectangle, all continuous whitespace starting at that column is deleted. When called from a program the rectangle's corners are START and END. With a prefix (or a FILL) argument, also fill too short lines. \(fn START END &optional FILL)" t nil) (autoload 'string-rectangle "rect" "\ Replace rectangle contents with STRING on each line. The length of STRING need not be the same as the rectangle width. Called from a program, takes three args; START, END and STRING. \(fn START END STRING)" t nil) (defalias 'replace-rectangle 'string-rectangle) (autoload 'string-insert-rectangle "rect" "\ Insert STRING on each line of region-rectangle, shifting text right. When called from a program, the rectangle's corners are START and END. The left edge of the rectangle specifies the column for insertion. This command does not delete or overwrite any existing text. \(fn START END STRING)" t nil) (autoload 'clear-rectangle "rect" "\ Blank out the region-rectangle. The text previously in the region is overwritten with blanks. When called from a program the rectangle's corners are START and END. With a prefix (or a FILL) argument, also fill with blanks the parts of the rectangle which were empty. \(fn START END &optional FILL)" t nil) ;;;*** ;;;### (autoloads (refill-mode) "refill" "textmodes/refill.el" (19259 ;;;;;; 35428)) ;;; Generated autoloads from textmodes/refill.el (autoload 'refill-mode "refill" "\ Toggle Refill minor mode. With prefix arg, turn Refill mode on if arg is positive, otherwise turn it off. When Refill mode is on, the current paragraph will be formatted when changes are made within it. Self-inserting characters only cause refilling if they would cause auto-filling. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (reftex-reset-scanning-information reftex-mode ;;;;;; turn-on-reftex) "reftex" "textmodes/reftex.el" (19259 35428)) ;;; Generated autoloads from textmodes/reftex.el (autoload 'turn-on-reftex "reftex" "\ Turn on RefTeX mode. \(fn)" nil nil) (autoload 'reftex-mode "reftex" "\ Minor mode with distinct support for \\label, \\ref and \\cite in LaTeX. \\<reftex-mode-map>A Table of Contents of the entire (multifile) document with browsing capabilities is available with `\\[reftex-toc]'. Labels can be created with `\\[reftex-label]' and referenced with `\\[reftex-reference]'. When referencing, you get a menu with all labels of a given type and context of the label definition. The selected label is inserted as a \\ref macro. Citations can be made with `\\[reftex-citation]' which will use a regular expression to pull out a *formatted* list of articles from your BibTeX database. The selected citation is inserted as a \\cite macro. Index entries can be made with `\\[reftex-index-selection-or-word]' which indexes the word at point or the current selection. More general index entries are created with `\\[reftex-index]'. `\\[reftex-display-index]' displays the compiled index. Most command have help available on the fly. This help is accessed by pressing `?' to any prompt mentioning this feature. Extensive documentation about RefTeX is available in Info format. You can view this information with `\\[reftex-info]'. \\{reftex-mode-map} Under X, these and other functions will also be available as `Ref' menu on the menu bar. ------------------------------------------------------------------------------ \(fn &optional ARG)" t nil) (autoload 'reftex-reset-scanning-information "reftex" "\ Reset the symbols containing information from buffer scanning. This enforces rescanning the buffer on next use. \(fn)" nil nil) ;;;*** ;;;### (autoloads (reftex-citation) "reftex-cite" "textmodes/reftex-cite.el" ;;;;;; (19259 35428)) ;;; Generated autoloads from textmodes/reftex-cite.el (autoload 'reftex-citation "reftex-cite" "\ Make a citation using BibTeX database files. After prompting for a regular expression, scans the buffers with bibtex entries (taken from the \\bibliography command) and offers the matching entries for selection. The selected entry is formatted according to `reftex-cite-format' and inserted into the buffer. If NO-INSERT is non-nil, nothing is inserted, only the selected key returned. FORMAT-KEY can be used to pre-select a citation format. When called with a `C-u' prefix, prompt for optional arguments in cite macros. When called with a numeric prefix, make that many citations. When called with point inside the braces of a `\\cite' command, it will add another key, ignoring the value of `reftex-cite-format'. The regular expression uses an expanded syntax: && is interpreted as `and'. Thus, `aaaa&&bbb' matches entries which contain both `aaaa' and `bbb'. While entering the regexp, completion on knows citation keys is possible. `=' is a good regular expression to match all entries in all files. \(fn &optional NO-INSERT FORMAT-KEY)" t nil) ;;;*** ;;;### (autoloads (reftex-isearch-minor-mode) "reftex-global" "textmodes/reftex-global.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from textmodes/reftex-global.el (autoload 'reftex-isearch-minor-mode "reftex-global" "\ When on, isearch searches the whole document, not only the current file. This minor mode allows isearch to search through all the files of the current TeX document. With no argument, this command toggles `reftex-isearch-minor-mode'. With a prefix argument ARG, turn `reftex-isearch-minor-mode' on if ARG is positive, otherwise turn it off. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (reftex-index-phrases-mode) "reftex-index" "textmodes/reftex-index.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from textmodes/reftex-index.el (autoload 'reftex-index-phrases-mode "reftex-index" "\ Major mode for managing the Index phrases of a LaTeX document. This buffer was created with RefTeX. To insert new phrases, use - `C-c \\' in the LaTeX document to copy selection or word - `\\[reftex-index-new-phrase]' in the phrases buffer. To index phrases use one of: \\[reftex-index-this-phrase] index current phrase \\[reftex-index-next-phrase] index next phrase (or N with prefix arg) \\[reftex-index-all-phrases] index all phrases \\[reftex-index-remaining-phrases] index current and following phrases \\[reftex-index-region-phrases] index the phrases in the region You can sort the phrases in this buffer with \\[reftex-index-sort-phrases]. To display information about the phrase at point, use \\[reftex-index-phrases-info]. For more information see the RefTeX User Manual. Here are all local bindings. \\{reftex-index-phrases-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (reftex-all-document-files) "reftex-parse" "textmodes/reftex-parse.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from textmodes/reftex-parse.el (autoload 'reftex-all-document-files "reftex-parse" "\ Return a list of all files belonging to the current document. When RELATIVE is non-nil, give file names relative to directory of master file. \(fn &optional RELATIVE)" nil nil) ;;;*** ;;;### (autoloads nil "reftex-vars" "textmodes/reftex-vars.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from textmodes/reftex-vars.el (put 'reftex-vref-is-default 'safe-local-variable (lambda (x) (or (stringp x) (symbolp x)))) (put 'reftex-fref-is-default 'safe-local-variable (lambda (x) (or (stringp x) (symbolp x)))) (put 'reftex-level-indent 'safe-local-variable 'integerp) (put 'reftex-guess-label-type 'safe-local-variable (lambda (x) (memq x '(nil t)))) ;;;*** ;;;### (autoloads (regexp-opt-depth regexp-opt) "regexp-opt" "emacs-lisp/regexp-opt.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from emacs-lisp/regexp-opt.el (autoload 'regexp-opt "regexp-opt" "\ Return a regexp to match a string in the list STRINGS. Each string should be unique in STRINGS and should not contain any regexps, quoted or not. If optional PAREN is non-nil, ensure that the returned regexp is enclosed by at least one regexp grouping construct. The returned regexp is typically more efficient than the equivalent regexp: (let ((open (if PAREN \"\\\\(\" \"\")) (close (if PAREN \"\\\\)\" \"\"))) (concat open (mapconcat 'regexp-quote STRINGS \"\\\\|\") close)) If PAREN is `words', then the resulting regexp is additionally surrounded by \\=\\< and \\>. \(fn STRINGS &optional PAREN)" nil nil) (autoload 'regexp-opt-depth "regexp-opt" "\ Return the depth of REGEXP. This means the number of non-shy regexp grouping constructs \(parenthesized expressions) in REGEXP. \(fn REGEXP)" nil nil) ;;;*** ;;;### (autoloads (remember-diary-extract-entries remember-clipboard ;;;;;; remember-other-frame remember) "remember" "textmodes/remember.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from textmodes/remember.el (autoload 'remember "remember" "\ Remember an arbitrary piece of data. INITIAL is the text to initially place in the *Remember* buffer, or nil to bring up a blank *Remember* buffer. With a prefix or a visible region, use the region as INITIAL. \(fn &optional INITIAL)" t nil) (autoload 'remember-other-frame "remember" "\ Call `remember' in another frame. \(fn &optional INITIAL)" t nil) (autoload 'remember-clipboard "remember" "\ Remember the contents of the current clipboard. Most useful for remembering things from Netscape or other X Windows application. \(fn)" t nil) (autoload 'remember-diary-extract-entries "remember" "\ Extract diary entries from the region. \(fn)" nil nil) ;;;*** ;;;### (autoloads (repeat) "repeat" "repeat.el" (19259 35429)) ;;; Generated autoloads from repeat.el (autoload 'repeat "repeat" "\ Repeat most recently executed command. With prefix arg, apply new prefix arg to that command; otherwise, use the prefix arg that was used before (if any). This command is like the `.' command in the vi editor. If this command is invoked by a multi-character key sequence, it can then be repeated by repeating the final character of that sequence. This behavior can be modified by the global variable `repeat-on-final-keystroke'. `repeat' ignores commands bound to input events. Hence the term \"most recently executed command\" shall be read as \"most recently executed command not bound to an input event\". \(fn REPEAT-ARG)" t nil) ;;;*** ;;;### (autoloads (reporter-submit-bug-report) "reporter" "mail/reporter.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from mail/reporter.el (autoload 'reporter-submit-bug-report "reporter" "\ Begin submitting a bug report via email. ADDRESS is the email address for the package's maintainer. PKGNAME is the name of the package (if you want to include version numbers, you must put them into PKGNAME before calling this function). Optional PRE-HOOKS and POST-HOOKS are passed to `reporter-dump-state'. Optional SALUTATION is inserted at the top of the mail buffer, and point is left after the salutation. VARLIST is the list of variables to dump (see `reporter-dump-state' for details). The optional argument PRE-HOOKS and POST-HOOKS are passed to `reporter-dump-state'. Optional argument SALUTATION is text to be inserted at the top of the mail buffer; in that case, point is left after that text. This function prompts for a summary if `reporter-prompt-for-summary-p' is non-nil. This function does not send a message; it uses the given information to initialize a message, which the user can then edit and finally send \(or decline to send). The variable `mail-user-agent' controls which mail-sending package is used for editing and sending the message. \(fn ADDRESS PKGNAME VARLIST &optional PRE-HOOKS POST-HOOKS SALUTATION)" nil nil) ;;;*** ;;;### (autoloads (reposition-window) "reposition" "reposition.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from reposition.el (autoload 'reposition-window "reposition" "\ Make the current definition and/or comment visible. Further invocations move it to the top of the window or toggle the visibility of comments that precede it. Point is left unchanged unless prefix ARG is supplied. If the definition is fully onscreen, it is moved to the top of the window. If it is partly offscreen, the window is scrolled to get the definition (or as much as will fit) onscreen, unless point is in a comment which is also partly offscreen, in which case the scrolling attempts to get as much of the comment onscreen as possible. Initially `reposition-window' attempts to make both the definition and preceding comments visible. Further invocations toggle the visibility of the comment lines. If ARG is non-nil, point may move in order to make the whole defun visible (if only part could otherwise be made so), to make the defun line visible (if point is in code and it could not be made so, or if only comments, including the first comment line, are visible), or to make the first comment line visible (if point is in a comment). \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (global-reveal-mode reveal-mode) "reveal" "reveal.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from reveal.el (autoload 'reveal-mode "reveal" "\ Toggle Reveal mode on or off. Reveal mode renders invisible text around point visible again. Interactively, with no prefix argument, toggle the mode. With universal prefix ARG (or if ARG is nil) turn mode on. With zero or negative ARG turn mode off. \(fn &optional ARG)" t nil) (defvar global-reveal-mode nil "\ Non-nil if Global-Reveal mode is enabled. See the command `global-reveal-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-reveal-mode'.") (custom-autoload 'global-reveal-mode "reveal" nil) (autoload 'global-reveal-mode "reveal" "\ Toggle Reveal mode in all buffers on or off. Reveal mode renders invisible text around point visible again. Interactively, with no prefix argument, toggle the mode. With universal prefix ARG (or if ARG is nil) turn mode on. With zero or negative ARG turn mode off. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (make-ring ring-p) "ring" "emacs-lisp/ring.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from emacs-lisp/ring.el (autoload 'ring-p "ring" "\ Return t if X is a ring; nil otherwise. \(fn X)" nil nil) (autoload 'make-ring "ring" "\ Make a ring that can contain SIZE elements. \(fn SIZE)" nil nil) ;;;*** ;;;### (autoloads (rlogin) "rlogin" "net/rlogin.el" (19259 35429)) ;;; Generated autoloads from net/rlogin.el (add-hook 'same-window-regexps (purecopy "^\\*rlogin-.*\\*\\(\\|<[0-9]+>\\)")) (autoload 'rlogin "rlogin" "\ Open a network login connection via `rlogin' with args INPUT-ARGS. INPUT-ARGS should start with a host name; it may also contain other arguments for `rlogin'. Input is sent line-at-a-time to the remote connection. Communication with the remote host is recorded in a buffer `*rlogin-HOST*' \(or `*rlogin-USER@HOST*' if the remote username differs). If a prefix argument is given and the buffer `*rlogin-HOST*' already exists, a new buffer with a different connection will be made. When called from a program, if the optional second argument BUFFER is a string or buffer, it specifies the buffer to use. The variable `rlogin-program' contains the name of the actual program to run. It can be a relative or absolute path. The variable `rlogin-explicit-args' is a list of arguments to give to the rlogin when starting. They are added after any arguments given in INPUT-ARGS. If the default value of `rlogin-directory-tracking-mode' is t, then the default directory in that buffer is set to a remote (FTP) file name to access your home directory on the remote machine. Occasionally this causes an error, if you cannot access the home directory on that machine. This error is harmless as long as you don't try to use that default directory. If `rlogin-directory-tracking-mode' is neither t nor nil, then the default directory is initially set up to your (local) home directory. This is useful if the remote machine and your local machine share the same files via NFS. This is the default. If you wish to change directory tracking styles during a session, use the function `rlogin-directory-tracking-mode' rather than simply setting the variable. \(fn INPUT-ARGS &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (rmail-set-remote-password rmail-input rmail-mode ;;;;;; rmail rmail-show-message-hook rmail-secondary-file-regexp ;;;;;; rmail-secondary-file-directory rmail-primary-inbox-list rmail-highlighted-headers ;;;;;; rmail-retry-ignored-headers rmail-displayed-headers rmail-ignored-headers ;;;;;; rmail-dont-reply-to-names rmail-user-mail-address-regexp ;;;;;; rmail-movemail-variant-p) "rmail" "mail/rmail.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from mail/rmail.el (autoload 'rmail-movemail-variant-p "rmail" "\ Return t if the current movemail variant is any of VARIANTS. Currently known variants are 'emacs and 'mailutils. \(fn &rest VARIANTS)" nil nil) (defvar rmail-user-mail-address-regexp nil "\ Regexp matching user mail addresses. If non-nil, this variable is used to identify the correspondent when receiving new mail. If it matches the address of the sender, the recipient is taken as correspondent of a mail. If nil (default value), your `user-login-name' and `user-mail-address' are used to exclude yourself as correspondent. Usually you don't have to set this variable, except if you collect mails sent by you under different user names. Then it should be a regexp matching your mail addresses. Setting this variable has an effect only before reading a mail.") (custom-autoload 'rmail-user-mail-address-regexp "rmail" t) (defvar rmail-dont-reply-to-names nil "\ A regexp specifying addresses to prune from a reply message. If this is nil, it is set the first time you compose a reply, to a value which excludes your own email address, plus whatever is specified by `rmail-default-dont-reply-to-names'. Matching addresses are excluded from the CC field in replies, and also the To field, unless this would leave an empty To field.") (custom-autoload 'rmail-dont-reply-to-names "rmail" t) (defvar rmail-default-dont-reply-to-names (purecopy "\\`info-") "\ Regexp specifying part of the default value of `rmail-dont-reply-to-names'. This is used when the user does not set `rmail-dont-reply-to-names' explicitly. (The other part of the default value is the user's email address and name.) It is useful to set this variable in the site customization file. The default value is conventionally used for large mailing lists to broadcast announcements.") (defvar rmail-ignored-headers (purecopy (concat "^via:\\|^mail-from:\\|^origin:\\|^references:\\|^sender:" "\\|^status:\\|^received:\\|^x400-originator:\\|^x400-recipients:" "\\|^x400-received:\\|^x400-mts-identifier:\\|^x400-content-type:" "\\|^\\(resent-\\|\\)message-id:\\|^summary-line:\\|^resent-date:" "\\|^nntp-posting-host:\\|^path:\\|^x-char.*:\\|^x-face:\\|^face:" "\\|^x-mailer:\\|^delivered-to:\\|^lines:" "\\|^content-transfer-encoding:\\|^x-coding-system:" "\\|^return-path:\\|^errors-to:\\|^return-receipt-to:" "\\|^precedence:\\|^mime-version:" "\\|^list-owner:\\|^list-help:\\|^list-post:\\|^list-subscribe:" "\\|^list-id:\\|^list-unsubscribe:\\|^list-archive:" "\\|^content-length:\\|^nntp-posting-date:\\|^user-agent" "\\|^importance:\\|^envelope-to:\\|^delivery-date\\|^openpgp:" "\\|^mbox-line:\\|^cancel-lock:" "\\|^DomainKey-Signature:\\|^dkim-signature:" "\\|^resent-face:\\|^resent-x.*:\\|^resent-organization:\\|^resent-openpgp:" "\\|^x-.*:")) "\ Regexp to match header fields that Rmail should normally hide. \(See also `rmail-nonignored-headers', which overrides this regexp.) This variable is used for reformatting the message header, which normally happens once for each message, when you view the message for the first time in Rmail. To make a change in this variable take effect for a message that you have already viewed, go to that message and type \\[rmail-toggle-header] twice.") (custom-autoload 'rmail-ignored-headers "rmail" t) (defvar rmail-displayed-headers nil "\ Regexp to match Header fields that Rmail should display. If nil, display all header fields except those matched by `rmail-ignored-headers'.") (custom-autoload 'rmail-displayed-headers "rmail" t) (defvar rmail-retry-ignored-headers (purecopy "^x-authentication-warning:\\|^x-detected-operating-system:\\|^x-spam[-a-z]*:\\|content-type:\\|content-transfer-encoding:\\|mime-version:") "\ Headers that should be stripped when retrying a failed message.") (custom-autoload 'rmail-retry-ignored-headers "rmail" t) (defvar rmail-highlighted-headers (purecopy "^From:\\|^Subject:") "\ Regexp to match Header fields that Rmail should normally highlight. A value of nil means don't highlight. Uses the face `rmail-highlight'.") (custom-autoload 'rmail-highlighted-headers "rmail" t) (defvar rmail-primary-inbox-list nil "\ List of files that are inboxes for your primary mail file `rmail-file-name'. If this is nil, uses the environment variable MAIL. If that is unset, uses a file named by the function `user-login-name' in the directory `rmail-spool-directory' (whose value depends on the operating system). For example, \"/var/mail/USER\".") (custom-autoload 'rmail-primary-inbox-list "rmail" t) (defvar rmail-secondary-file-directory (purecopy "~/") "\ Directory for additional secondary Rmail files.") (custom-autoload 'rmail-secondary-file-directory "rmail" t) (defvar rmail-secondary-file-regexp (purecopy "\\.xmail$") "\ Regexp for which files are secondary Rmail files.") (custom-autoload 'rmail-secondary-file-regexp "rmail" t) (defvar rmail-mode-hook nil "\ List of functions to call when Rmail is invoked.") (defvar rmail-show-message-hook nil "\ List of functions to call when Rmail displays a message.") (custom-autoload 'rmail-show-message-hook "rmail" t) (defvar rmail-file-coding-system nil "\ Coding system used in RMAIL file. This is set to nil by default.") (defvar rmail-insert-mime-forwarded-message-function nil "\ Function to insert a message in MIME format so it can be forwarded. This function is called if `rmail-enable-mime' or `rmail-enable-mime-composing' is non-nil. It is called with one argument FORWARD-BUFFER, which is a buffer containing the message to forward. The current buffer is the outgoing mail buffer.") (autoload 'rmail "rmail" "\ Read and edit incoming mail. Moves messages into file named by `rmail-file-name' and edits that file in RMAIL Mode. Type \\[describe-mode] once editing that file, for a list of RMAIL commands. May be called with file name as argument; then performs rmail editing on that file, but does not copy any new mail into the file. Interactively, if you supply a prefix argument, then you have a chance to specify a file name with the minibuffer. If `rmail-display-summary' is non-nil, make a summary for this RMAIL file. \(fn &optional FILE-NAME-ARG)" t nil) (autoload 'rmail-mode "rmail" "\ Rmail Mode is used by \\<rmail-mode-map>\\[rmail] for editing Rmail files. All normal editing commands are turned off. Instead, these commands are available: \\[rmail-beginning-of-message] Move point to front of this message. \\[rmail-end-of-message] Move point to bottom of this message. \\[scroll-up] Scroll to next screen of this message. \\[scroll-down] Scroll to previous screen of this message. \\[rmail-next-undeleted-message] Move to Next non-deleted message. \\[rmail-previous-undeleted-message] Move to Previous non-deleted message. \\[rmail-next-message] Move to Next message whether deleted or not. \\[rmail-previous-message] Move to Previous message whether deleted or not. \\[rmail-first-message] Move to the first message in Rmail file. \\[rmail-last-message] Move to the last message in Rmail file. \\[rmail-show-message] Jump to message specified by numeric position in file. \\[rmail-search] Search for string and show message it is found in. \\[rmail-delete-forward] Delete this message, move to next nondeleted. \\[rmail-delete-backward] Delete this message, move to previous nondeleted. \\[rmail-undelete-previous-message] Undelete message. Tries current message, then earlier messages till a deleted message is found. \\[rmail-edit-current-message] Edit the current message. \\[rmail-cease-edit] to return to Rmail. \\[rmail-expunge] Expunge deleted messages. \\[rmail-expunge-and-save] Expunge and save the file. \\[rmail-quit] Quit Rmail: expunge, save, then switch to another buffer. \\[save-buffer] Save without expunging. \\[rmail-get-new-mail] Move new mail from system spool directory into this file. \\[rmail-mail] Mail a message (same as \\[mail-other-window]). \\[rmail-continue] Continue composing outgoing message started before. \\[rmail-reply] Reply to this message. Like \\[rmail-mail] but initializes some fields. \\[rmail-retry-failure] Send this message again. Used on a mailer failure message. \\[rmail-forward] Forward this message to another user. \\[rmail-output] Output (append) this message to another mail file. \\[rmail-output-as-seen] Output (append) this message to file as it's displayed. \\[rmail-output-body-to-file] Save message body to a file. Default filename comes from Subject line. \\[rmail-input] Input Rmail file. Run Rmail on that file. \\[rmail-add-label] Add label to message. It will be displayed in the mode line. \\[rmail-kill-label] Kill label. Remove a label from current message. \\[rmail-next-labeled-message] Move to Next message with specified label (label defaults to last one specified). Standard labels: filed, unseen, answered, forwarded, deleted. Any other label is present only if you add it with \\[rmail-add-label]. \\[rmail-previous-labeled-message] Move to Previous message with specified label \\[rmail-summary] Show headers buffer, with a one line summary of each message. \\[rmail-summary-by-labels] Summarize only messages with particular label(s). \\[rmail-summary-by-recipients] Summarize only messages with particular recipient(s). \\[rmail-summary-by-regexp] Summarize only messages with particular regexp(s). \\[rmail-summary-by-topic] Summarize only messages with subject line regexp(s). \\[rmail-toggle-header] Toggle display of complete header. \(fn)" t nil) (autoload 'rmail-input "rmail" "\ Run Rmail on file FILENAME. \(fn FILENAME)" t nil) (autoload 'rmail-set-remote-password "rmail" "\ Set PASSWORD to be used for retrieving mail from a POP or IMAP server. \(fn PASSWORD)" t nil) ;;;*** ;;;### (autoloads (rmail-output-body-to-file rmail-output-as-seen ;;;;;; rmail-output) "rmailout" "mail/rmailout.el" (19259 35429)) ;;; Generated autoloads from mail/rmailout.el (put 'rmail-output-file-alist 'risky-local-variable t) (autoload 'rmail-output "rmailout" "\ Append this message to mail file FILE-NAME. Writes mbox format, unless FILE-NAME exists and is Babyl format, in which case it writes Babyl. Interactively, the default file name comes from `rmail-default-file', which is updated to the name you use in this command. In all uses, if FILE-NAME is not absolute, it is expanded with the directory part of `rmail-default-file'. If a buffer is visiting FILE-NAME, adds the text to that buffer rather than saving the file directly. If the buffer is an Rmail buffer, updates it accordingly. This command always outputs the complete message header, even if the header display is currently pruned. Optional prefix argument COUNT (default 1) says to output that many consecutive messages, starting with the current one (ignoring deleted messages). If `rmail-delete-after-output' is non-nil, deletes messages after output. The optional third argument NOATTRIBUTE, if non-nil, says not to set the `filed' attribute, and not to display a \"Wrote file\" message (if writing a file directly). Set the optional fourth argument NOT-RMAIL non-nil if you call this from a non-Rmail buffer. In this case, COUNT is ignored. \(fn FILE-NAME &optional COUNT NOATTRIBUTE NOT-RMAIL)" t nil) (autoload 'rmail-output-as-seen "rmailout" "\ Append this message to mbox file named FILE-NAME. The details are as for `rmail-output', except that: i) the header is output as currently seen ii) this function cannot write to Babyl files iii) an Rmail buffer cannot be visiting FILE-NAME Note that if NOT-RMAIL is non-nil, there is no difference between this function and `rmail-output'. This argument may be removed in future, so you should call `rmail-output' directly in that case. \(fn FILE-NAME &optional COUNT NOATTRIBUTE NOT-RMAIL)" t nil) (autoload 'rmail-output-body-to-file "rmailout" "\ Write this message body to the file FILE-NAME. Interactively, the default file name comes from either the message \"Subject\" header, or from `rmail-default-body-file'. Updates the value of `rmail-default-body-file' accordingly. In all uses, if FILE-NAME is not absolute, it is expanded with the directory part of `rmail-default-body-file'. Note that this overwrites FILE-NAME (after confirmation), rather than appending to it. Deletes the message after writing if `rmail-delete-after-output' is non-nil. \(fn FILE-NAME)" t nil) ;;;*** ;;;### (autoloads (rng-c-load-schema) "rng-cmpct" "nxml/rng-cmpct.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from nxml/rng-cmpct.el (autoload 'rng-c-load-schema "rng-cmpct" "\ Load a schema in RELAX NG compact syntax from FILENAME. Return a pattern. \(fn FILENAME)" nil nil) ;;;*** ;;;### (autoloads (rng-nxml-mode-init) "rng-nxml" "nxml/rng-nxml.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from nxml/rng-nxml.el (autoload 'rng-nxml-mode-init "rng-nxml" "\ Initialize `nxml-mode' to take advantage of `rng-validate-mode'. This is typically called from `nxml-mode-hook'. Validation will be enabled if `rng-nxml-auto-validate-flag' is non-nil. \(fn)" t nil) ;;;*** ;;;### (autoloads (rng-validate-mode) "rng-valid" "nxml/rng-valid.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from nxml/rng-valid.el (autoload 'rng-validate-mode "rng-valid" "\ Minor mode performing continual validation against a RELAX NG schema. Checks whether the buffer is a well-formed XML 1.0 document, conforming to the XML Namespaces Recommendation and valid against a RELAX NG schema. The mode-line indicates whether it is or not. Any parts of the buffer that cause it not to be are considered errors and are highlighted with face `rng-error'. A description of each error is available as a tooltip. \\[rng-next-error] goes to the next error after point. Clicking mouse-1 on the word `Invalid' in the mode-line goes to the first error in the buffer. If the buffer changes, then it will be automatically rechecked when Emacs becomes idle; the rechecking will be paused whenever there is input pending. By default, uses a vacuous schema that allows any well-formed XML document. A schema can be specified explictly using \\[rng-set-schema-file-and-validate], or implicitly based on the buffer's file name or on the root element name. In each case the schema must be a RELAX NG schema using the compact schema (such schemas conventionally have a suffix of `.rnc'). The variable `rng-schema-locating-files' specifies files containing rules to use for finding the schema. \(fn &optional ARG NO-CHANGE-SCHEMA)" t nil) ;;;*** ;;;### (autoloads (rng-xsd-compile) "rng-xsd" "nxml/rng-xsd.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from nxml/rng-xsd.el (put 'http://www\.w3\.org/2001/XMLSchema-datatypes 'rng-dt-compile 'rng-xsd-compile) (autoload 'rng-xsd-compile "rng-xsd" "\ Provides W3C XML Schema as a RELAX NG datatypes library. NAME is a symbol giving the local name of the datatype. PARAMS is a list of pairs (PARAM-NAME . PARAM-VALUE) where PARAM-NAME is a symbol giving the name of the parameter and PARAM-VALUE is a string giving its value. If NAME or PARAMS are invalid, it calls rng-dt-error passing it arguments in the same style as format; the value from rng-dt-error will be returned. Otherwise, it returns a list. The first member of the list is t if any string is a legal value for the datatype and nil otherwise. The second argument is a symbol; this symbol will be called as a function passing it a string followed by the remaining members of the list. The function must return an object representing the value of the datatype that was represented by the string, or nil if the string is not a representation of any value. The object returned can be any convenient non-nil value, provided that, if two strings represent the same value, the returned objects must be equal. \(fn NAME PARAMS)" nil nil) ;;;*** ;;;### (autoloads (robin-use-package robin-modify-package robin-define-package) ;;;;;; "robin" "international/robin.el" (19259 35429)) ;;; Generated autoloads from international/robin.el (autoload 'robin-define-package "robin" "\ Define a robin package. NAME is the string of this robin package. DOCSTRING is the documentation string of this robin package. Each RULE is of the form (INPUT OUTPUT) where INPUT is a string and OUTPUT is either a character or a string. RULES are not evaluated. If there already exists a robin package whose name is NAME, the new one replaces the old one. \(fn NAME DOCSTRING &rest RULES)" nil (quote macro)) (autoload 'robin-modify-package "robin" "\ Change a rule in an already defined robin package. NAME is the string specifying a robin package. INPUT is a string that specifies the input pattern. OUTPUT is either a character or a string to be generated. \(fn NAME INPUT OUTPUT)" nil nil) (autoload 'robin-use-package "robin" "\ Start using robin package NAME, which is a string. \(fn NAME)" nil nil) ;;;*** ;;;### (autoloads (toggle-rot13-mode rot13-other-window rot13-region ;;;;;; rot13-string rot13) "rot13" "rot13.el" (19259 35429)) ;;; Generated autoloads from rot13.el (autoload 'rot13 "rot13" "\ Return ROT13 encryption of OBJECT, a buffer or string. \(fn OBJECT &optional START END)" nil nil) (autoload 'rot13-string "rot13" "\ Return ROT13 encryption of STRING. \(fn STRING)" nil nil) (autoload 'rot13-region "rot13" "\ ROT13 encrypt the region between START and END in current buffer. \(fn START END)" t nil) (autoload 'rot13-other-window "rot13" "\ Display current buffer in ROT13 in another window. The text itself is not modified, only the way it is displayed is affected. To terminate the ROT13 display, delete that window. As long as that window is not deleted, any buffer displayed in it will become instantly encoded in ROT13. See also `toggle-rot13-mode'. \(fn)" t nil) (autoload 'toggle-rot13-mode "rot13" "\ Toggle the use of ROT13 encoding for the current window. \(fn)" t nil) ;;;*** ;;;### (autoloads (rst-minor-mode rst-mode) "rst" "textmodes/rst.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from textmodes/rst.el (add-to-list 'auto-mode-alist (purecopy '("\\.re?st\\'" . rst-mode))) (autoload 'rst-mode "rst" "\ Major mode for editing reStructuredText documents. \\<rst-mode-map> There are a number of convenient keybindings provided by Rst mode. The main one is \\[rst-adjust], it updates or rotates the section title around point or promotes/demotes the decorations within the region (see full details below). Use negative prefix arg to rotate in the other direction. Turning on `rst-mode' calls the normal hooks `text-mode-hook' and `rst-mode-hook'. This mode also supports font-lock highlighting. You may customize `rst-mode-lazy' to toggle font-locking of blocks. \\{rst-mode-map} \(fn)" t nil) (autoload 'rst-minor-mode "rst" "\ ReST Minor Mode. Toggle ReST minor mode. With no argument, this command toggles the mode. Non-null prefix argument turns on the mode. Null prefix argument turns off the mode. When ReST minor mode is enabled, the ReST mode keybindings are installed on top of the major mode bindings. Use this for modes derived from Text mode, like Mail mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (ruby-mode) "ruby-mode" "progmodes/ruby-mode.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from progmodes/ruby-mode.el (autoload 'ruby-mode "ruby-mode" "\ Major mode for editing Ruby scripts. \\[ruby-indent-line] properly indents subexpressions of multi-line class, module, def, if, while, for, do, and case statements, taking nesting into account. The variable `ruby-indent-level' controls the amount of indentation. \\{ruby-mode-map} \(fn)" t nil) (add-to-list 'auto-mode-alist (cons (purecopy "\\.rb\\'") 'ruby-mode)) (dolist (name (list "ruby" "rbx" "jruby" "ruby1.9" "ruby1.8")) (add-to-list 'interpreter-mode-alist (cons (purecopy name) 'ruby-mode))) ;;;*** ;;;### (autoloads (ruler-mode) "ruler-mode" "ruler-mode.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from ruler-mode.el (autoload 'ruler-mode "ruler-mode" "\ Display a ruler in the header line if ARG > 0. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (rx rx-to-string) "rx" "emacs-lisp/rx.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from emacs-lisp/rx.el (autoload 'rx-to-string "rx" "\ Parse and produce code for regular expression FORM. FORM is a regular expression in sexp form. NO-GROUP non-nil means don't put shy groups around the result. \(fn FORM &optional NO-GROUP)" nil nil) (autoload 'rx "rx" "\ Translate regular expressions REGEXPS in sexp form to a regexp string. REGEXPS is a non-empty sequence of forms of the sort listed below. Note that `rx' is a Lisp macro; when used in a Lisp program being compiled, the translation is performed by the compiler. See `rx-to-string' for how to do such a translation at run-time. The following are valid subforms of regular expressions in sexp notation. STRING matches string STRING literally. CHAR matches character CHAR literally. `not-newline', `nonl' matches any character except a newline. `anything' matches any character `(any SET ...)' `(in SET ...)' `(char SET ...)' matches any character in SET .... SET may be a character or string. Ranges of characters can be specified as `A-Z' in strings. Ranges may also be specified as conses like `(?A . ?Z)'. SET may also be the name of a character class: `digit', `control', `hex-digit', `blank', `graph', `print', `alnum', `alpha', `ascii', `nonascii', `lower', `punct', `space', `upper', `word', or one of their synonyms. `(not (any SET ...))' matches any character not in SET ... `line-start', `bol' matches the empty string, but only at the beginning of a line in the text being matched `line-end', `eol' is similar to `line-start' but matches only at the end of a line `string-start', `bos', `bot' matches the empty string, but only at the beginning of the string being matched against. `string-end', `eos', `eot' matches the empty string, but only at the end of the string being matched against. `buffer-start' matches the empty string, but only at the beginning of the buffer being matched against. Actually equivalent to `string-start'. `buffer-end' matches the empty string, but only at the end of the buffer being matched against. Actually equivalent to `string-end'. `point' matches the empty string, but only at point. `word-start', `bow' matches the empty string, but only at the beginning of a word. `word-end', `eow' matches the empty string, but only at the end of a word. `word-boundary' matches the empty string, but only at the beginning or end of a word. `(not word-boundary)' `not-word-boundary' matches the empty string, but not at the beginning or end of a word. `symbol-start' matches the empty string, but only at the beginning of a symbol. `symbol-end' matches the empty string, but only at the end of a symbol. `digit', `numeric', `num' matches 0 through 9. `control', `cntrl' matches ASCII control characters. `hex-digit', `hex', `xdigit' matches 0 through 9, a through f and A through F. `blank' matches space and tab only. `graphic', `graph' matches graphic characters--everything except ASCII control chars, space, and DEL. `printing', `print' matches printing characters--everything except ASCII control chars and DEL. `alphanumeric', `alnum' matches letters and digits. (But at present, for multibyte characters, it matches anything that has word syntax.) `letter', `alphabetic', `alpha' matches letters. (But at present, for multibyte characters, it matches anything that has word syntax.) `ascii' matches ASCII (unibyte) characters. `nonascii' matches non-ASCII (multibyte) characters. `lower', `lower-case' matches anything lower-case. `upper', `upper-case' matches anything upper-case. `punctuation', `punct' matches punctuation. (But at present, for multibyte characters, it matches anything that has non-word syntax.) `space', `whitespace', `white' matches anything that has whitespace syntax. `word', `wordchar' matches anything that has word syntax. `not-wordchar' matches anything that has non-word syntax. `(syntax SYNTAX)' matches a character with syntax SYNTAX. SYNTAX must be one of the following symbols, or a symbol corresponding to the syntax character, e.g. `\\.' for `\\s.'. `whitespace' (\\s- in string notation) `punctuation' (\\s.) `word' (\\sw) `symbol' (\\s_) `open-parenthesis' (\\s() `close-parenthesis' (\\s)) `expression-prefix' (\\s') `string-quote' (\\s\") `paired-delimiter' (\\s$) `escape' (\\s\\) `character-quote' (\\s/) `comment-start' (\\s<) `comment-end' (\\s>) `string-delimiter' (\\s|) `comment-delimiter' (\\s!) `(not (syntax SYNTAX))' matches a character that doesn't have syntax SYNTAX. `(category CATEGORY)' matches a character with category CATEGORY. CATEGORY must be either a character to use for C, or one of the following symbols. `consonant' (\\c0 in string notation) `base-vowel' (\\c1) `upper-diacritical-mark' (\\c2) `lower-diacritical-mark' (\\c3) `tone-mark' (\\c4) `symbol' (\\c5) `digit' (\\c6) `vowel-modifying-diacritical-mark' (\\c7) `vowel-sign' (\\c8) `semivowel-lower' (\\c9) `not-at-end-of-line' (\\c<) `not-at-beginning-of-line' (\\c>) `alpha-numeric-two-byte' (\\cA) `chinse-two-byte' (\\cC) `greek-two-byte' (\\cG) `japanese-hiragana-two-byte' (\\cH) `indian-tow-byte' (\\cI) `japanese-katakana-two-byte' (\\cK) `korean-hangul-two-byte' (\\cN) `cyrillic-two-byte' (\\cY) `combining-diacritic' (\\c^) `ascii' (\\ca) `arabic' (\\cb) `chinese' (\\cc) `ethiopic' (\\ce) `greek' (\\cg) `korean' (\\ch) `indian' (\\ci) `japanese' (\\cj) `japanese-katakana' (\\ck) `latin' (\\cl) `lao' (\\co) `tibetan' (\\cq) `japanese-roman' (\\cr) `thai' (\\ct) `vietnamese' (\\cv) `hebrew' (\\cw) `cyrillic' (\\cy) `can-break' (\\c|) `(not (category CATEGORY))' matches a character that doesn't have category CATEGORY. `(and SEXP1 SEXP2 ...)' `(: SEXP1 SEXP2 ...)' `(seq SEXP1 SEXP2 ...)' `(sequence SEXP1 SEXP2 ...)' matches what SEXP1 matches, followed by what SEXP2 matches, etc. `(submatch SEXP1 SEXP2 ...)' `(group SEXP1 SEXP2 ...)' like `and', but makes the match accessible with `match-end', `match-beginning', and `match-string'. `(group SEXP1 SEXP2 ...)' another name for `submatch'. `(or SEXP1 SEXP2 ...)' `(| SEXP1 SEXP2 ...)' matches anything that matches SEXP1 or SEXP2, etc. If all args are strings, use `regexp-opt' to optimize the resulting regular expression. `(minimal-match SEXP)' produce a non-greedy regexp for SEXP. Normally, regexps matching zero or more occurrences of something are \"greedy\" in that they match as much as they can, as long as the overall regexp can still match. A non-greedy regexp matches as little as possible. `(maximal-match SEXP)' produce a greedy regexp for SEXP. This is the default. Below, `SEXP ...' represents a sequence of regexp forms, treated as if enclosed in `(and ...)'. `(zero-or-more SEXP ...)' `(0+ SEXP ...)' matches zero or more occurrences of what SEXP ... matches. `(* SEXP ...)' like `zero-or-more', but always produces a greedy regexp, independent of `rx-greedy-flag'. `(*? SEXP ...)' like `zero-or-more', but always produces a non-greedy regexp, independent of `rx-greedy-flag'. `(one-or-more SEXP ...)' `(1+ SEXP ...)' matches one or more occurrences of SEXP ... `(+ SEXP ...)' like `one-or-more', but always produces a greedy regexp. `(+? SEXP ...)' like `one-or-more', but always produces a non-greedy regexp. `(zero-or-one SEXP ...)' `(optional SEXP ...)' `(opt SEXP ...)' matches zero or one occurrences of A. `(? SEXP ...)' like `zero-or-one', but always produces a greedy regexp. `(?? SEXP ...)' like `zero-or-one', but always produces a non-greedy regexp. `(repeat N SEXP)' `(= N SEXP ...)' matches N occurrences. `(>= N SEXP ...)' matches N or more occurrences. `(repeat N M SEXP)' `(** N M SEXP ...)' matches N to M occurrences. `(backref N)' matches what was matched previously by submatch N. `(eval FORM)' evaluate FORM and insert result. If result is a string, `regexp-quote' it. `(regexp REGEXP)' include REGEXP in string notation in the result. \(fn &rest REGEXPS)" nil (quote macro)) ;;;*** ;;;### (autoloads (savehist-mode savehist-mode) "savehist" "savehist.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from savehist.el (defvar savehist-mode nil "\ Mode for automatic saving of minibuffer history. Set this by calling the `savehist-mode' function or using the customize interface.") (custom-autoload 'savehist-mode "savehist" nil) (autoload 'savehist-mode "savehist" "\ Toggle savehist-mode. Positive ARG turns on `savehist-mode'. When on, savehist-mode causes minibuffer history to be saved periodically and when exiting Emacs. When turned on for the first time in an Emacs session, it causes the previous minibuffer history to be loaded from `savehist-file'. This mode should normally be turned on from your Emacs init file. Calling it at any other time replaces your current minibuffer histories, which is probably undesirable. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (dsssl-mode scheme-mode) "scheme" "progmodes/scheme.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from progmodes/scheme.el (autoload 'scheme-mode "scheme" "\ Major mode for editing Scheme code. Editing commands are similar to those of `lisp-mode'. In addition, if an inferior Scheme process is running, some additional commands will be defined, for evaluating expressions and controlling the interpreter, and the state of the process will be displayed in the modeline of all Scheme buffers. The names of commands that interact with the Scheme process start with \"xscheme-\" if you use the MIT Scheme-specific `xscheme' package; for more information see the documentation for `xscheme-interaction-mode'. Use \\[run-scheme] to start an inferior Scheme using the more general `cmuscheme' package. Commands: Delete converts tabs to spaces as it moves back. Blank lines separate paragraphs. Semicolons start comments. \\{scheme-mode-map} Entry to this mode calls the value of `scheme-mode-hook' if that value is non-nil. \(fn)" t nil) (autoload 'dsssl-mode "scheme" "\ Major mode for editing DSSSL code. Editing commands are similar to those of `lisp-mode'. Commands: Delete converts tabs to spaces as it moves back. Blank lines separate paragraphs. Semicolons start comments. \\{scheme-mode-map} Entering this mode runs the hooks `scheme-mode-hook' and then `dsssl-mode-hook' and inserts the value of `dsssl-sgml-declaration' if that variable's value is a string. \(fn)" t nil) ;;;*** ;;;### (autoloads (gnus-score-mode) "score-mode" "gnus/score-mode.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from gnus/score-mode.el (autoload 'gnus-score-mode "score-mode" "\ Mode for editing Gnus score files. This mode is an extended emacs-lisp mode. \\{gnus-score-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (scroll-all-mode) "scroll-all" "scroll-all.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from scroll-all.el (defvar scroll-all-mode nil "\ Non-nil if Scroll-All mode is enabled. See the command `scroll-all-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `scroll-all-mode'.") (custom-autoload 'scroll-all-mode "scroll-all" nil) (autoload 'scroll-all-mode "scroll-all" "\ Toggle Scroll-All minor mode. With ARG, turn Scroll-All minor mode on if ARG is positive, off otherwise. When Scroll-All mode is on, scrolling commands entered in one window apply to all visible windows in the same frame. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (scroll-lock-mode) "scroll-lock" "scroll-lock.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from scroll-lock.el (autoload 'scroll-lock-mode "scroll-lock" "\ Buffer-local minor mode for pager-like scrolling. Keys which normally move point by line or paragraph will scroll the buffer by the respective amount of lines instead and point will be kept vertically fixed relative to window boundaries during scrolling. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (semantic-mode semantic-default-submodes) "semantic" ;;;;;; "cedet/semantic.el" (19259 35429)) ;;; Generated autoloads from cedet/semantic.el (defvar semantic-default-submodes '(global-semantic-idle-scheduler-mode global-semanticdb-minor-mode) "\ List of auxiliary Semantic minor modes enabled by `semantic-mode'. The possible elements of this list include the following: `global-semanticdb-minor-mode' - Maintain tag database. `global-semantic-idle-scheduler-mode' - Reparse buffer when idle. `global-semantic-idle-summary-mode' - Show summary of tag at point. `global-semantic-idle-completions-mode' - Show completions when idle. `global-semantic-decoration-mode' - Additional tag decorations. `global-semantic-highlight-func-mode' - Highlight the current tag. `global-semantic-stickyfunc-mode' - Show current fun in header line. `global-semantic-mru-bookmark-mode' - Provide `switch-to-buffer'-like keybinding for tag names.") (custom-autoload 'semantic-default-submodes "semantic" t) (defvar semantic-mode nil "\ Non-nil if Semantic mode is enabled. See the command `semantic-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `semantic-mode'.") (custom-autoload 'semantic-mode "semantic" nil) (autoload 'semantic-mode "semantic" "\ Toggle Semantic mode. With ARG, turn Semantic mode on if ARG is positive, off otherwise. In Semantic mode, Emacs parses the buffers you visit for their semantic content. This information is used by a variety of auxilliary minor modes, listed in `semantic-default-submodes'; all the minor modes in this list are also enabled when you enable Semantic mode. \\{semantic-mode-map} \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (mail-other-frame mail-other-window mail mail-mailing-lists ;;;;;; mail-mode mail-send-nonascii mail-bury-selects-summary mail-default-headers ;;;;;; mail-default-directory mail-signature-file mail-signature ;;;;;; mail-citation-prefix-regexp mail-citation-hook mail-indentation-spaces ;;;;;; mail-yank-prefix mail-setup-hook mail-personal-alias-file ;;;;;; mail-alias-file mail-default-reply-to mail-archive-file-name ;;;;;; mail-header-separator send-mail-function mail-interactive ;;;;;; mail-self-blind mail-specify-envelope-from mail-from-style) ;;;;;; "sendmail" "mail/sendmail.el" (19259 35429)) ;;; Generated autoloads from mail/sendmail.el (defvar mail-from-style 'default "\ Specifies how \"From:\" fields look. If `nil', they contain just the return address like: king@grassland.com If `parens', they look like: king@grassland.com (Elvis Parsley) If `angles', they look like: Elvis Parsley <king@grassland.com> Otherwise, most addresses look like `angles', but they look like `parens' if `angles' would need quoting and `parens' would not.") (custom-autoload 'mail-from-style "sendmail" t) (defvar mail-specify-envelope-from nil "\ If non-nil, specify the envelope-from address when sending mail. The value used to specify it is whatever is found in the variable `mail-envelope-from', with `user-mail-address' as fallback. On most systems, specifying the envelope-from address is a privileged operation. This variable affects sendmail and smtpmail -- if you use feedmail to send mail, see instead the variable `feedmail-deduce-envelope-from'.") (custom-autoload 'mail-specify-envelope-from "sendmail" t) (defvar mail-self-blind nil "\ Non-nil means insert BCC to self in messages to be sent. This is done when the message is initialized, so you can remove or alter the BCC field to override the default.") (custom-autoload 'mail-self-blind "sendmail" t) (defvar mail-interactive t "\ Non-nil means when sending a message wait for and display errors. Otherwise, let mailer send back a message to report errors.") (custom-autoload 'mail-interactive "sendmail" t) (put 'send-mail-function 'standard-value '((if (and window-system (memq system-type '(darwin windows-nt))) 'mailclient-send-it 'sendmail-send-it))) (defvar send-mail-function (if (and window-system (memq system-type '(darwin windows-nt))) 'mailclient-send-it 'sendmail-send-it) "\ Function to call to send the current buffer as mail. The headers should be delimited by a line which is not a valid RFC822 header or continuation line, that matches the variable `mail-header-separator'. This is used by the default mail-sending commands. See also `message-send-mail-function' for use with the Message package.") (custom-autoload 'send-mail-function "sendmail" t) (defvar mail-header-separator (purecopy "--text follows this line--") "\ Line used to separate headers from text in messages being composed.") (custom-autoload 'mail-header-separator "sendmail" t) (defvar mail-archive-file-name nil "\ Name of file to write all outgoing messages in, or nil for none. This is normally an mbox file, but for backwards compatibility may also be a Babyl file.") (custom-autoload 'mail-archive-file-name "sendmail" t) (defvar mail-default-reply-to nil "\ Address to insert as default Reply-to field of outgoing messages. If nil, it will be initialized from the REPLYTO environment variable when you first send mail.") (custom-autoload 'mail-default-reply-to "sendmail" t) (defvar mail-alias-file nil "\ If non-nil, the name of a file to use instead of `/usr/lib/aliases'. This file defines aliases to be expanded by the mailer; this is a different feature from that of defining aliases in `.mailrc' to be expanded in Emacs. This variable has no effect unless your system uses sendmail as its mailer.") (custom-autoload 'mail-alias-file "sendmail" t) (defvar mail-personal-alias-file (purecopy "~/.mailrc") "\ If non-nil, the name of the user's personal mail alias file. This file typically should be in same format as the `.mailrc' file used by the `Mail' or `mailx' program. This file need not actually exist.") (custom-autoload 'mail-personal-alias-file "sendmail" t) (defvar mail-setup-hook nil "\ Normal hook, run each time a new outgoing message is initialized.") (custom-autoload 'mail-setup-hook "sendmail" t) (defvar mail-aliases t "\ Alist of mail address aliases, or t meaning should be initialized from your mail aliases file. \(The file's name is normally `~/.mailrc', but `mail-personal-alias-file' can specify a different file name.) The alias definitions in the file have this form: alias ALIAS MEANING") (defvar mail-yank-prefix "> " "\ Prefix insert on lines of yanked message being replied to. If this is nil, use indentation, as specified by `mail-indentation-spaces'.") (custom-autoload 'mail-yank-prefix "sendmail" t) (defvar mail-indentation-spaces 3 "\ Number of spaces to insert at the beginning of each cited line. Used by `mail-yank-original' via `mail-indent-citation'.") (custom-autoload 'mail-indentation-spaces "sendmail" t) (defvar mail-citation-hook nil "\ Hook for modifying a citation just inserted in the mail buffer. Each hook function can find the citation between (point) and (mark t), and should leave point and mark around the citation text as modified. The hook functions can find the header of the cited message in the variable `mail-citation-header', whether or not this is included in the cited portion of the message. If this hook is entirely empty (nil), a default action is taken instead of no action.") (custom-autoload 'mail-citation-hook "sendmail" t) (defvar mail-citation-prefix-regexp (purecopy "\\([ ]*\\(\\w\\|[_.]\\)+>+\\|[ ]*[]>|}]\\)+") "\ Regular expression to match a citation prefix plus whitespace. It should match whatever sort of citation prefixes you want to handle, with whitespace before and after; it should also match just whitespace. The default value matches citations like `foo-bar>' plus whitespace.") (custom-autoload 'mail-citation-prefix-regexp "sendmail" t) (defvar mail-signature t "\ Text inserted at end of mail buffer when a message is initialized. If t, it means to insert the contents of the file `mail-signature-file'. If a string, that string is inserted. (To make a proper signature, the string should begin with \\n\\n-- \\n, which is the standard way to delimit a signature in a message.) Otherwise, it should be an expression; it is evaluated and should insert whatever you want to insert.") (custom-autoload 'mail-signature "sendmail" t) (defvar mail-signature-file (purecopy "~/.signature") "\ File containing the text inserted at end of mail buffer.") (custom-autoload 'mail-signature-file "sendmail" t) (defvar mail-default-directory (purecopy "~/") "\ Directory for mail buffers. Value of `default-directory' for mail buffers. This directory is used for auto-save files of mail buffers.") (custom-autoload 'mail-default-directory "sendmail" t) (defvar mail-default-headers nil "\ A string containing header lines, to be inserted in outgoing messages. It can contain newlines, and should end in one. It is inserted before you edit the message, so you can edit or delete the lines.") (custom-autoload 'mail-default-headers "sendmail" t) (defvar mail-bury-selects-summary t "\ If non-nil, try to show Rmail summary buffer after returning from mail. The functions \\[mail-send-on-exit] or \\[mail-dont-send] select the Rmail summary buffer before returning, if it exists and this variable is non-nil.") (custom-autoload 'mail-bury-selects-summary "sendmail" t) (defvar mail-send-nonascii 'mime "\ Specify whether to allow sending non-ASCII characters in mail. If t, that means do allow it. nil means don't allow it. `query' means ask the user each time. `mime' means add an appropriate MIME header if none already present. The default is `mime'. Including non-ASCII characters in a mail message can be problematical for the recipient, who may not know how to decode them properly.") (custom-autoload 'mail-send-nonascii "sendmail" t) (autoload 'mail-mode "sendmail" "\ Major mode for editing mail to be sent. Like Text Mode but with these additional commands: \\[mail-send] mail-send (send the message) \\[mail-send-and-exit] mail-send-and-exit (send the message and exit) Here are commands that move to a header field (and create it if there isn't): \\[mail-to] move to To: \\[mail-subject] move to Subj: \\[mail-bcc] move to BCC: \\[mail-cc] move to CC: \\[mail-fcc] move to FCC: \\[mail-reply-to] move to Reply-To: \\[mail-mail-reply-to] move to Mail-Reply-To: \\[mail-mail-followup-to] move to Mail-Followup-To: \\[mail-text] move to message text. \\[mail-signature] mail-signature (insert `mail-signature-file' file). \\[mail-yank-original] mail-yank-original (insert current message, in Rmail). \\[mail-fill-yanked-message] mail-fill-yanked-message (fill what was yanked). \\[mail-sent-via] mail-sent-via (add a sent-via field for each To or CC). Turning on Mail mode runs the normal hooks `text-mode-hook' and `mail-mode-hook' (in that order). \(fn)" t nil) (defvar mail-mailing-lists nil "\ List of mailing list addresses the user is subscribed to. The variable is used to trigger insertion of the \"Mail-Followup-To\" header when sending a message to a mailing list.") (custom-autoload 'mail-mailing-lists "sendmail" t) (defvar sendmail-coding-system nil "\ *Coding system for encoding the outgoing mail. This has higher priority than the default `buffer-file-coding-system' and `default-sendmail-coding-system', but lower priority than the local value of `buffer-file-coding-system'. See also the function `select-message-coding-system'.") (defvar default-sendmail-coding-system 'iso-latin-1 "\ Default coding system for encoding the outgoing mail. This variable is used only when `sendmail-coding-system' is nil. This variable is set/changed by the command `set-language-environment'. User should not set this variable manually, instead use `sendmail-coding-system' to get a constant encoding of outgoing mails regardless of the current language environment. See also the function `select-message-coding-system'.") (add-hook 'same-window-buffer-names (purecopy "*mail*")) (autoload 'mail "sendmail" "\ Edit a message to be sent. Prefix arg means resume editing (don't erase). When this function returns, the buffer `*mail*' is selected. The value is t if the message was newly initialized; otherwise, nil. Optionally, the signature file `mail-signature-file' can be inserted at the end; see the variable `mail-signature'. \\<mail-mode-map> While editing message, type \\[mail-send-and-exit] to send the message and exit. Various special commands starting with C-c are available in sendmail mode to move to message header fields: \\{mail-mode-map} If `mail-self-blind' is non-nil, a BCC to yourself is inserted when the message is initialized. If `mail-default-reply-to' is non-nil, it should be an address (a string); a Reply-to: field with that address is inserted. If `mail-archive-file-name' is non-nil, an FCC field with that file name is inserted. The normal hook `mail-setup-hook' is run after the message is initialized. It can add more default fields to the message. The first argument, NOERASE, determines what to do when there is an existing modified `*mail*' buffer. If NOERASE is nil, the existing mail buffer is used, and the user is prompted whether to keep the old contents or to erase them. If NOERASE has the value `new', a new mail buffer will be created instead of using the old one. Any other non-nil value means to always select the old buffer without erasing the contents. The second through fifth arguments, TO, SUBJECT, IN-REPLY-TO and CC, specify if non-nil the initial contents of those header fields. These arguments should not have final newlines. The sixth argument REPLYBUFFER is a buffer which contains an original message being replied to, or else an action of the form (FUNCTION . ARGS) which says how to insert the original. Or it can be nil, if not replying to anything. The seventh argument ACTIONS is a list of actions to take if/when the message is sent. Each action looks like (FUNCTION . ARGS); when the message is sent, we apply FUNCTION to ARGS. This is how Rmail arranges to mark messages `answered'. \(fn &optional NOERASE TO SUBJECT IN-REPLY-TO CC REPLYBUFFER ACTIONS)" t nil) (autoload 'mail-other-window "sendmail" "\ Like `mail' command, but display mail buffer in another window. \(fn &optional NOERASE TO SUBJECT IN-REPLY-TO CC REPLYBUFFER SENDACTIONS)" t nil) (autoload 'mail-other-frame "sendmail" "\ Like `mail' command, but display mail buffer in another frame. \(fn &optional NOERASE TO SUBJECT IN-REPLY-TO CC REPLYBUFFER SENDACTIONS)" t nil) ;;;*** ;;;### (autoloads (server-save-buffers-kill-terminal server-mode ;;;;;; server-force-delete server-start) "server" "server.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from server.el (autoload 'server-start "server" "\ Allow this Emacs process to be a server for client processes. This starts a server communications subprocess through which client \"editors\" can send your editing commands to this Emacs job. To use the server, set up the program `emacsclient' in the Emacs distribution as your standard \"editor\". Optional argument LEAVE-DEAD (interactively, a prefix arg) means just kill any existing server communications subprocess. If a server is already running, the server is not started. To force-start a server, do \\[server-force-delete] and then \\[server-start]. \(fn &optional LEAVE-DEAD)" t nil) (autoload 'server-force-delete "server" "\ Unconditionally delete connection file for server NAME. If server is running, it is first stopped. NAME defaults to `server-name'. With argument, ask for NAME. \(fn &optional NAME)" t nil) (defvar server-mode nil "\ Non-nil if Server mode is enabled. See the command `server-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `server-mode'.") (custom-autoload 'server-mode "server" nil) (autoload 'server-mode "server" "\ Toggle Server mode. With ARG, turn Server mode on if ARG is positive, off otherwise. Server mode runs a process that accepts commands from the `emacsclient' program. See `server-start' and Info node `Emacs server'. \(fn &optional ARG)" t nil) (autoload 'server-save-buffers-kill-terminal "server" "\ Offer to save each buffer, then kill the current client. With ARG non-nil, silently save all file-visiting buffers, then kill. If emacsclient was started with a list of filenames to edit, then only these files will be asked to be saved. \(fn ARG)" nil nil) ;;;*** ;;;### (autoloads (ses-mode) "ses" "ses.el" (19259 35429)) ;;; Generated autoloads from ses.el (autoload 'ses-mode "ses" "\ Major mode for Simple Emacs Spreadsheet. See \"ses-example.ses\" (in `data-directory') for more info. Key definitions: \\{ses-mode-map} These key definitions are active only in the print area (the visible part): \\{ses-mode-print-map} These are active only in the minibuffer, when entering or editing a formula: \\{ses-mode-edit-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (html-mode sgml-mode) "sgml-mode" "textmodes/sgml-mode.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from textmodes/sgml-mode.el (autoload 'sgml-mode "sgml-mode" "\ Major mode for editing SGML documents. Makes > match <. Keys <, &, SPC within <>, \", / and ' can be electric depending on `sgml-quick-keys'. An argument of N to a tag-inserting command means to wrap it around the next N words. In Transient Mark mode, when the mark is active, N defaults to -1, which means to wrap it around the current region. If you like upcased tags, put (setq sgml-transformation-function 'upcase) in your `.emacs' file. Use \\[sgml-validate] to validate your document with an SGML parser. Do \\[describe-variable] sgml- SPC to see available variables. Do \\[describe-key] on the following bindings to discover what they do. \\{sgml-mode-map} \(fn)" t nil) (autoload 'html-mode "sgml-mode" "\ Major mode based on SGML mode for editing HTML documents. This allows inserting skeleton constructs used in hypertext documents with completion. See below for an introduction to HTML. Use \\[browse-url-of-buffer] to see how this comes out. See also `sgml-mode' on which this is based. Do \\[describe-variable] html- SPC and \\[describe-variable] sgml- SPC to see available variables. To write fairly well formatted pages you only need to know few things. Most browsers have a function to read the source code of the page being seen, so you can imitate various tricks. Here's a very short HTML primer which you can also view with a browser to see what happens: <title>A Title Describing Contents</title> should be on every page. Pages can have <h1>Very Major Headlines</h1> through <h6>Very Minor Headlines</h6> <hr> Parts can be separated with horizontal rules. <p>Paragraphs only need an opening tag. Line breaks and multiple spaces are ignored unless the text is <pre>preformatted.</pre> Text can be marked as <b>bold</b>, <i>italic</i> or <u>underlined</u> using the normal M-o or Edit/Text Properties/Face commands. Pages can have <a name=\"SOMENAME\">named points</a> and can link other points to them with <a href=\"#SOMENAME\">see also somename</a>. In the same way <a href=\"URL\">see also URL</a> where URL is a filename relative to current directory, or absolute as in `http://www.cs.indiana.edu/elisp/w3/docs.html'. Images in many formats can be inlined with <img src=\"URL\">. If you mainly create your own documents, `sgml-specials' might be interesting. But note that some HTML 2 browsers can't handle `''. To work around that, do: (eval-after-load \"sgml-mode\" '(aset sgml-char-names ?' nil)) \\{html-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (sh-mode) "sh-script" "progmodes/sh-script.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from progmodes/sh-script.el (put 'sh-shell 'safe-local-variable 'symbolp) (autoload 'sh-mode "sh-script" "\ Major mode for editing shell scripts. This mode works for many shells, since they all have roughly the same syntax, as far as commands, arguments, variables, pipes, comments etc. are concerned. Unless the file's magic number indicates the shell, your usual shell is assumed. Since filenames rarely give a clue, they are not further analyzed. This mode adapts to the variations between shells (see `sh-set-shell') by means of an inheritance based feature lookup (see `sh-feature'). This mechanism applies to all variables (including skeletons) that pertain to shell-specific features. The default style of this mode is that of Rosenblatt's Korn shell book. The syntax of the statements varies with the shell being used. The following commands are available, based on the current shell's syntax: \\<sh-mode-map> \\[sh-case] case statement \\[sh-for] for loop \\[sh-function] function definition \\[sh-if] if statement \\[sh-indexed-loop] indexed loop from 1 to n \\[sh-while-getopts] while getopts loop \\[sh-repeat] repeat loop \\[sh-select] select loop \\[sh-until] until loop \\[sh-while] while loop For sh and rc shells indentation commands are: \\[sh-show-indent] Show the variable controlling this line's indentation. \\[sh-set-indent] Set then variable controlling this line's indentation. \\[sh-learn-line-indent] Change the indentation variable so this line would indent to the way it currently is. \\[sh-learn-buffer-indent] Set the indentation variables so the buffer indents as it currently is indented. \\[backward-delete-char-untabify] Delete backward one position, even if it was a tab. \\[newline-and-indent] Delete unquoted space and indent new line same as this one. \\[sh-end-of-command] Go to end of successive commands. \\[sh-beginning-of-command] Go to beginning of successive commands. \\[sh-set-shell] Set this buffer's shell, and maybe its magic number. \\[sh-execute-region] Have optional header and region be executed in a subshell. \\[sh-maybe-here-document] Without prefix, following an unquoted < inserts here document. {, (, [, ', \", ` Unless quoted with \\, insert the pairs {}, (), [], or '', \"\", ``. If you generally program a shell different from your login shell you can set `sh-shell-file' accordingly. If your shell's file name doesn't correctly indicate what shell it is use `sh-alias-alist' to translate. If your shell gives error messages with line numbers, you can use \\[executable-interpret] with your script for an edit-interpret-debug cycle. \(fn)" t nil) (defalias 'shell-script-mode 'sh-mode) ;;;*** ;;;### (autoloads (sha1) "sha1" "sha1.el" (19259 35429)) ;;; Generated autoloads from sha1.el (autoload 'sha1 "sha1" "\ Return the SHA1 (Secure Hash Algorithm) of an object. OBJECT is either a string or a buffer. Optional arguments BEG and END denote buffer positions for computing the hash of a portion of OBJECT. If BINARY is non-nil, return a string in binary form. \(fn OBJECT &optional BEG END BINARY)" nil nil) ;;;*** ;;;### (autoloads (list-load-path-shadows) "shadow" "emacs-lisp/shadow.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from emacs-lisp/shadow.el (autoload 'list-load-path-shadows "shadow" "\ Display a list of Emacs Lisp files that shadow other files. If STRINGP is non-nil, returns any shadows as a string. Otherwise, if interactive shows any shadows in a `*Shadows*' buffer; else prints messages listing any shadows. This function lists potential load path problems. Directories in the `load-path' variable are searched, in order, for Emacs Lisp files. When a previously encountered file name is found again, a message is displayed indicating that the later file is \"hidden\" by the earlier. For example, suppose `load-path' is set to \(\"/usr/gnu/emacs/site-lisp\" \"/usr/gnu/emacs/share/emacs/19.30/lisp\") and that each of these directories contains a file called XXX.el. Then XXX.el in the site-lisp directory is referred to by all of: \(require 'XXX), (autoload .... \"XXX\"), (load-library \"XXX\") etc. The first XXX.el file prevents Emacs from seeing the second (unless the second is loaded explicitly via `load-file'). When not intended, such shadowings can be the source of subtle problems. For example, the above situation may have arisen because the XXX package was not distributed with versions of Emacs prior to 19.30. An Emacs maintainer downloaded XXX from elsewhere and installed it. Later, XXX was updated and included in the Emacs distribution. Unless the Emacs maintainer checks for this, the new version of XXX will be hidden behind the old (which may no longer work with the new Emacs version). This function performs these checks and flags all possible shadowings. Because a .el file may exist without a corresponding .elc \(or vice-versa), these suffixes are essentially ignored. A file XXX.elc in an early directory (that does not contain XXX.el) is considered to shadow a later file XXX.el, and vice-versa. Shadowings are located by calling the (non-interactive) companion function, `find-emacs-lisp-shadows'. \(fn &optional STRINGP)" t nil) ;;;*** ;;;### (autoloads (shadow-initialize shadow-define-regexp-group shadow-define-literal-group ;;;;;; shadow-define-cluster) "shadowfile" "shadowfile.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from shadowfile.el (autoload 'shadow-define-cluster "shadowfile" "\ Edit (or create) the definition of a cluster NAME. This is a group of hosts that share directories, so that copying to or from one of them is sufficient to update the file on all of them. Clusters are defined by a name, the network address of a primary host (the one we copy files to), and a regular expression that matches the hostnames of all the sites in the cluster. \(fn NAME)" t nil) (autoload 'shadow-define-literal-group "shadowfile" "\ Declare a single file to be shared between sites. It may have different filenames on each site. When this file is edited, the new version will be copied to each of the other locations. Sites can be specific hostnames, or names of clusters (see `shadow-define-cluster'). \(fn)" t nil) (autoload 'shadow-define-regexp-group "shadowfile" "\ Make each of a group of files be shared between hosts. Prompts for regular expression; files matching this are shared between a list of sites, which are also prompted for. The filenames must be identical on all hosts (if they aren't, use `shadow-define-literal-group' instead of this function). Each site can be either a hostname or the name of a cluster (see `shadow-define-cluster'). \(fn)" t nil) (autoload 'shadow-initialize "shadowfile" "\ Set up file shadowing. \(fn)" t nil) ;;;*** ;;;### (autoloads (shell shell-dumb-shell-regexp) "shell" "shell.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from shell.el (defvar shell-dumb-shell-regexp (purecopy "cmd\\(proxy\\)?\\.exe") "\ Regexp to match shells that don't save their command history, and don't handle the backslash as a quote character. For shells that match this regexp, Emacs will write out the command history when the shell finishes, and won't remove backslashes when it unquotes shell arguments.") (custom-autoload 'shell-dumb-shell-regexp "shell" t) (autoload 'shell "shell" "\ Run an inferior shell, with I/O through BUFFER (which defaults to `*shell*'). Interactively, a prefix arg means to prompt for BUFFER. If `default-directory' is a remote file name, it is also prompted to change if called with a prefix arg. If BUFFER exists but shell process is not running, make new shell. If BUFFER exists and shell process is running, just switch to BUFFER. Program used comes from variable `explicit-shell-file-name', or (if that is nil) from the ESHELL environment variable, or (if that is nil) from `shell-file-name'. If a file `~/.emacs_SHELLNAME' exists, or `~/.emacs.d/init_SHELLNAME.sh', it is given as initial input (but this may be lost, due to a timing error, if the shell discards input when it starts up). The buffer is put in Shell mode, giving commands for sending input and controlling the subjobs of the shell. See `shell-mode'. See also the variable `shell-prompt-pattern'. To specify a coding system for converting non-ASCII characters in the input and output to the shell, use \\[universal-coding-system-argument] before \\[shell]. You can also specify this with \\[set-buffer-process-coding-system] in the shell buffer, after you start the shell. The default comes from `process-coding-system-alist' and `default-process-coding-system'. The shell file name (sans directories) is used to make a symbol name such as `explicit-csh-args'. If that symbol is a variable, its value is used as a list of arguments when invoking the shell. Otherwise, one argument `-i' is passed to the shell. \(Type \\[describe-mode] in the shell buffer for a list of commands.) \(fn &optional BUFFER)" t nil) (add-hook 'same-window-buffer-names (purecopy "*shell*")) ;;;*** ;;;### (autoloads (sieve-upload-and-bury sieve-upload sieve-manage) ;;;;;; "sieve" "gnus/sieve.el" (19259 35429)) ;;; Generated autoloads from gnus/sieve.el (autoload 'sieve-manage "sieve" "\ Not documented \(fn SERVER &optional PORT)" t nil) (autoload 'sieve-upload "sieve" "\ Not documented \(fn &optional NAME)" t nil) (autoload 'sieve-upload-and-bury "sieve" "\ Not documented \(fn &optional NAME)" t nil) ;;;*** ;;;### (autoloads (sieve-mode) "sieve-mode" "gnus/sieve-mode.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from gnus/sieve-mode.el (autoload 'sieve-mode "sieve-mode" "\ Major mode for editing Sieve code. This is much like C mode except for the syntax of comments. Its keymap inherits from C mode's and it has the same variables for customizing indentation. It has its own abbrev table and its own syntax table. Turning on Sieve mode runs `sieve-mode-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (simula-mode) "simula" "progmodes/simula.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from progmodes/simula.el (autoload 'simula-mode "simula" "\ Major mode for editing SIMULA code. \\{simula-mode-map} Variables controlling indentation style: `simula-tab-always-indent' Non-nil means TAB in SIMULA mode should always reindent the current line, regardless of where in the line point is when the TAB command is used. `simula-indent-level' Indentation of SIMULA statements with respect to containing block. `simula-substatement-offset' Extra indentation after DO, THEN, ELSE, WHEN and OTHERWISE. `simula-continued-statement-offset' 3 Extra indentation for lines not starting a statement or substatement, e.g. a nested FOR-loop. If value is a list, each line in a multiple- line continued statement will have the car of the list extra indentation with respect to the previous line of the statement. `simula-label-offset' -4711 Offset of SIMULA label lines relative to usual indentation. `simula-if-indent' '(0 . 0) Extra indentation of THEN and ELSE with respect to the starting IF. Value is a cons cell, the car is extra THEN indentation and the cdr extra ELSE indentation. IF after ELSE is indented as the starting IF. `simula-inspect-indent' '(0 . 0) Extra indentation of WHEN and OTHERWISE with respect to the corresponding INSPECT. Value is a cons cell, the car is extra WHEN indentation and the cdr extra OTHERWISE indentation. `simula-electric-indent' nil If this variable is non-nil, `simula-indent-line' will check the previous line to see if it has to be reindented. `simula-abbrev-keyword' 'upcase Determine how SIMULA keywords will be expanded. Value is one of the symbols `upcase', `downcase', `capitalize', (as in) `abbrev-table', or nil if they should not be changed. `simula-abbrev-stdproc' 'abbrev-table Determine how standard SIMULA procedure and class names will be expanded. Value is one of the symbols `upcase', `downcase', `capitalize', (as in) `abbrev-table', or nil if they should not be changed. Turning on SIMULA mode calls the value of the variable simula-mode-hook with no arguments, if that value is non-nil. \(fn)" t nil) ;;;*** ;;;### (autoloads (skeleton-pair-insert-maybe skeleton-insert skeleton-proxy-new ;;;;;; define-skeleton) "skeleton" "skeleton.el" (19259 35429)) ;;; Generated autoloads from skeleton.el (defvar skeleton-filter-function 'identity "\ Function for transforming a skeleton proxy's aliases' variable value.") (autoload 'define-skeleton "skeleton" "\ Define a user-configurable COMMAND that enters a statement skeleton. DOCUMENTATION is that of the command. SKELETON is as defined under `skeleton-insert'. \(fn COMMAND DOCUMENTATION &rest SKELETON)" nil (quote macro)) (autoload 'skeleton-proxy-new "skeleton" "\ Insert SKELETON. Prefix ARG allows wrapping around words or regions (see `skeleton-insert'). If no ARG was given, but the region is visible, ARG defaults to -1 depending on `skeleton-autowrap'. An ARG of M-0 will prevent this just for once. This command can also be an abbrev expansion (3rd and 4th columns in \\[edit-abbrevs] buffer: \"\" command-name). Optional second argument STR may also be a string which will be the value of `str' whereas the skeleton's interactor is then ignored. \(fn SKELETON &optional STR ARG)" nil nil) (autoload 'skeleton-insert "skeleton" "\ Insert the complex statement skeleton SKELETON describes very concisely. With optional second argument REGIONS, wrap first interesting point \(`_') in skeleton around next REGIONS words, if REGIONS is positive. If REGIONS is negative, wrap REGIONS preceding interregions into first REGIONS interesting positions (successive `_'s) in skeleton. An interregion is the stretch of text between two contiguous marked points. If you marked A B C [] (where [] is the cursor) in alphabetical order, the 3 interregions are simply the last 3 regions. But if you marked B A [] C, the interregions are B-A, A-[], []-C. The optional third argument STR, if specified, is the value for the variable `str' within the skeleton. When this is non-nil, the interactor gets ignored, and this should be a valid skeleton element. SKELETON is made up as (INTERACTOR ELEMENT ...). INTERACTOR may be nil if not needed, a prompt-string or an expression for complex read functions. If ELEMENT is a string or a character it gets inserted (see also `skeleton-transformation-function'). Other possibilities are: \\n go to next line and indent according to mode _ interesting point, interregion here - interesting point, no interregion interaction, overrides interesting point set by _ > indent line (or interregion if > _) according to major mode @ add position to `skeleton-positions' & do next ELEMENT if previous moved point | do next ELEMENT if previous didn't move point -num delete num preceding characters (see `skeleton-untabify') resume: skipped, continue here if quit is signaled nil skipped After termination, point will be positioned at the last occurrence of - or at the first occurrence of _ or at the end of the inserted text. Further elements can be defined via `skeleton-further-elements'. ELEMENT may itself be a SKELETON with an INTERACTOR. The user is prompted repeatedly for different inputs. The SKELETON is processed as often as the user enters a non-empty string. \\[keyboard-quit] terminates skeleton insertion, but continues after `resume:' and positions at `_' if any. If INTERACTOR in such a subskeleton is a prompt-string which contains a \".. %s ..\" it is formatted with `skeleton-subprompt'. Such an INTERACTOR may also be a list of strings with the subskeleton being repeated once for each string. Quoted Lisp expressions are evaluated for their side-effects. Other Lisp expressions are evaluated and the value treated as above. Note that expressions may not return t since this implies an endless loop. Modes can define other symbols by locally setting them to any valid skeleton element. The following local variables are available: str first time: read a string according to INTERACTOR then: insert previously read string once more help help-form during interaction with the user or nil input initial input (string or cons with index) while reading str v1, v2 local variables for memorizing anything you want When done with skeleton, but before going back to `_'-point call `skeleton-end-hook' if that is non-nil. \(fn SKELETON &optional REGIONS STR)" nil nil) (autoload 'skeleton-pair-insert-maybe "skeleton" "\ Insert the character you type ARG times. With no ARG, if `skeleton-pair' is non-nil, pairing can occur. If the region is visible the pair is wrapped around it depending on `skeleton-autowrap'. Else, if `skeleton-pair-on-word' is non-nil or we are not before or inside a word, and if `skeleton-pair-filter-function' returns nil, pairing is performed. Pairing is also prohibited if we are right after a quoting character such as backslash. If a match is found in `skeleton-pair-alist', that is inserted, else the defaults are used. These are (), [], {}, <> and `' for the symmetrical ones, and the same character twice for the others. \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (smerge-start-session smerge-mode smerge-ediff) ;;;;;; "smerge-mode" "smerge-mode.el" (19259 35429)) ;;; Generated autoloads from smerge-mode.el (autoload 'smerge-ediff "smerge-mode" "\ Invoke ediff to resolve the conflicts. NAME-MINE, NAME-OTHER, and NAME-BASE, if non-nil, are used for the buffer names. \(fn &optional NAME-MINE NAME-OTHER NAME-BASE)" t nil) (autoload 'smerge-mode "smerge-mode" "\ Minor mode to simplify editing output from the diff3 program. \\{smerge-mode-map} \(fn &optional ARG)" t nil) (autoload 'smerge-start-session "smerge-mode" "\ Turn on `smerge-mode' and move point to first conflict marker. If no conflict maker is found, turn off `smerge-mode'. \(fn)" t nil) ;;;*** ;;;### (autoloads (smiley-buffer smiley-region) "smiley" "gnus/smiley.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from gnus/smiley.el (autoload 'smiley-region "smiley" "\ Replace in the region `smiley-regexp-alist' matches with corresponding images. A list of images is returned. \(fn START END)" t nil) (autoload 'smiley-buffer "smiley" "\ Run `smiley-region' at the buffer, specified in the argument or interactively. If there's no argument, do it at the current buffer \(fn &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (smtpmail-send-queued-mail smtpmail-send-it) "smtpmail" ;;;;;; "mail/smtpmail.el" (19259 35429)) ;;; Generated autoloads from mail/smtpmail.el (autoload 'smtpmail-send-it "smtpmail" "\ Not documented \(fn)" nil nil) (autoload 'smtpmail-send-queued-mail "smtpmail" "\ Send mail that was queued as a result of setting `smtpmail-queue-mail'. \(fn)" t nil) ;;;*** ;;;### (autoloads (snake) "snake" "play/snake.el" (19259 35429)) ;;; Generated autoloads from play/snake.el (autoload 'snake "snake" "\ Play the Snake game. Move the snake around without colliding with its tail or with the border. Eating dots causes the snake to get longer. Snake mode keybindings: \\<snake-mode-map> \\[snake-start-game] Starts a new game of Snake \\[snake-end-game] Terminates the current game \\[snake-pause-game] Pauses (or resumes) the current game \\[snake-move-left] Makes the snake move left \\[snake-move-right] Makes the snake move right \\[snake-move-up] Makes the snake move up \\[snake-move-down] Makes the snake move down \(fn)" t nil) ;;;*** ;;;### (autoloads (snmpv2-mode snmp-mode) "snmp-mode" "net/snmp-mode.el" ;;;;;; (19259 35429)) ;;; Generated autoloads from net/snmp-mode.el (autoload 'snmp-mode "snmp-mode" "\ Major mode for editing SNMP MIBs. Expression and list commands understand all C brackets. Tab indents for C code. Comments start with -- and end with newline or another --. Delete converts tabs to spaces as it moves back. \\{snmp-mode-map} Turning on snmp-mode runs the hooks in `snmp-common-mode-hook', then `snmp-mode-hook'. \(fn)" t nil) (autoload 'snmpv2-mode "snmp-mode" "\ Major mode for editing SNMPv2 MIBs. Expression and list commands understand all C brackets. Tab indents for C code. Comments start with -- and end with newline or another --. Delete converts tabs to spaces as it moves back. \\{snmp-mode-map} Turning on snmp-mode runs the hooks in `snmp-common-mode-hook', then `snmpv2-mode-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (sunrise-sunset) "solar" "calendar/solar.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from calendar/solar.el (autoload 'sunrise-sunset "solar" "\ Local time of sunrise and sunset for today. Accurate to a few seconds. If called with an optional prefix argument ARG, prompt for date. If called with an optional double prefix argument, prompt for longitude, latitude, time zone, and date, and always use standard time. This function is suitable for execution in a .emacs file. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (solitaire) "solitaire" "play/solitaire.el" (19259 ;;;;;; 35429)) ;;; Generated autoloads from play/solitaire.el (autoload 'solitaire "solitaire" "\ Play Solitaire. To play Solitaire, type \\[solitaire]. \\<solitaire-mode-map> Move around the board using the cursor keys. Move stones using \\[solitaire-move] followed by a direction key. Undo moves using \\[solitaire-undo]. Check for possible moves using \\[solitaire-do-check]. \(The variable `solitaire-auto-eval' controls whether to automatically check after each move or undo.) What is Solitaire? I don't know who invented this game, but it seems to be rather old and its origin seems to be northern Africa. Here's how to play: Initially, the board will look similar to this: Le Solitaire ============ o o o o o o o o o o o o o o o o . o o o o o o o o o o o o o o o o Let's call the o's stones and the .'s holes. One stone fits into one hole. As you can see, all holes but one are occupied by stones. The aim of the game is to get rid of all but one stone, leaving that last one in the middle of the board if you're cool. A stone can be moved if there is another stone next to it, and a hole after that one. Thus there must be three fields in a row, either horizontally or vertically, up, down, left or right, which look like this: o o . Then the first stone is moved to the hole, jumping over the second, which therefore is taken away. The above thus `evaluates' to: . . o That's all. Here's the board after two moves: o o o . o o o o . o o o o o . o o o o o o o o o o o o o o o o o o Pick your favourite shortcuts: \\{solitaire-mode-map} \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (reverse-region sort-columns sort-regexp-fields ;;;;;; sort-fields sort-numeric-fields sort-pages sort-paragraphs ;;;;;; sort-lines sort-subr) "sort" "sort.el" (19259 35429)) ;;; Generated autoloads from sort.el (put 'sort-fold-case 'safe-local-variable 'booleanp) (autoload 'sort-subr "sort" "\ General text sorting routine to divide buffer into records and sort them. We divide the accessible portion of the buffer into disjoint pieces called sort records. A portion of each sort record (perhaps all of it) is designated as the sort key. The records are rearranged in the buffer in order by their sort keys. The records may or may not be contiguous. Usually the records are rearranged in order of ascending sort key. If REVERSE is non-nil, they are rearranged in order of descending sort key. The variable `sort-fold-case' determines whether alphabetic case affects the sort order. The next four arguments are functions to be called to move point across a sort record. They will be called many times from within sort-subr. NEXTRECFUN is called with point at the end of the previous record. It moves point to the start of the next record. It should move point to the end of the buffer if there are no more records. The first record is assumed to start at the position of point when sort-subr is called. ENDRECFUN is called with point within the record. It should move point to the end of the record. STARTKEYFUN moves from the start of the record to the start of the key. It may return either a non-nil value to be used as the key, or else the key is the substring between the values of point after STARTKEYFUN and ENDKEYFUN are called. If STARTKEYFUN is nil, the key starts at the beginning of the record. ENDKEYFUN moves from the start of the sort key to the end of the sort key. ENDKEYFUN may be nil if STARTKEYFUN returns a value or if it would be the same as ENDRECFUN. PREDICATE is the function to use to compare keys. If keys are numbers, it defaults to `<', otherwise it defaults to `string<'. \(fn REVERSE NEXTRECFUN ENDRECFUN &optional STARTKEYFUN ENDKEYFUN PREDICATE)" nil nil) (autoload 'sort-lines "sort" "\ Sort lines in region alphabetically; argument means descending order. Called from a program, there are three arguments: REVERSE (non-nil means reverse order), BEG and END (region to sort). The variable `sort-fold-case' determines whether alphabetic case affects the sort order. \(fn REVERSE BEG END)" t nil) (autoload 'sort-paragraphs "sort" "\ Sort paragraphs in region alphabetically; argument means descending order. Called from a program, there are three arguments: REVERSE (non-nil means reverse order), BEG and END (region to sort). The variable `sort-fold-case' determines whether alphabetic case affects the sort order. \(fn REVERSE BEG END)" t nil) (autoload 'sort-pages "sort" "\ Sort pages in region alphabetically; argument means descending order. Called from a program, there are three arguments: REVERSE (non-nil means reverse order), BEG and END (region to sort). The variable `sort-fold-case' determines whether alphabetic case affects the sort order. \(fn REVERSE BEG END)" t nil) (put 'sort-numeric-base 'safe-local-variable 'integerp) (autoload 'sort-numeric-fields "sort" "\ Sort lines in region numerically by the ARGth field of each line. Fields are separated by whitespace and numbered from 1 up. Specified field must contain a number in each line of the region, which may begin with \"0x\" or \"0\" for hexadecimal and octal values. Otherwise, the number is interpreted according to sort-numeric-base. With a negative arg, sorts by the ARGth field counted from the right. Called from a program, there are three arguments: FIELD, BEG and END. BEG and END specify region to sort. \(fn FIELD BEG END)" t nil) (autoload 'sort-fields "sort" "\ Sort lines in region lexicographically by the ARGth field of each line. Fields are separated by whitespace and numbered from 1 up. With a negative arg, sorts by the ARGth field counted from the right. Called from a program, there are three arguments: FIELD, BEG and END. BEG and END specify region to sort. The variable `sort-fold-case' determines whether alphabetic case affects the sort order. \(fn FIELD BEG END)" t nil) (autoload 'sort-regexp-fields "sort" "\ Sort the region lexicographically as specified by RECORD-REGEXP and KEY. RECORD-REGEXP specifies the textual units which should be sorted. For example, to sort lines RECORD-REGEXP would be \"^.*$\" KEY specifies the part of each record (ie each match for RECORD-REGEXP) is to be used for sorting. If it is \"\\\\digit\" then the digit'th \"\\\\(...\\\\)\" match field from RECORD-REGEXP is used. If it is \"\\\\&\" then the whole record is used. Otherwise, it is a regular-expression for which to search within the record. If a match for KEY is not found within a record then that record is ignored. With a negative prefix arg sorts in reverse order. The variable `sort-fold-case' determines whether alphabetic case affects the sort order. For example: to sort lines in the region by the first word on each line starting with the letter \"f\", RECORD-REGEXP would be \"^.*$\" and KEY would be \"\\\\=\\<f\\\\w*\\\\>\" \(fn REVERSE RECORD-REGEXP KEY-REGEXP BEG END)" t nil) (autoload 'sort-columns "sort" "\ Sort lines in region alphabetically by a certain range of columns. For the purpose of this command, the region BEG...END includes the entire line that point is in and the entire line the mark is in. The column positions of point and mark bound the range of columns to sort on. A prefix argument means sort into REVERSE order. The variable `sort-fold-case' determines whether alphabetic case affects the sort order. Note that `sort-columns' rejects text that contains tabs, because tabs could be split across the specified columns and it doesn't know how to handle that. Also, when possible, it uses the `sort' utility program, which doesn't understand tabs. Use \\[untabify] to convert tabs to spaces before sorting. \(fn REVERSE &optional BEG END)" t nil) (autoload 'reverse-region "sort" "\ Reverse the order of lines in a region. From a program takes two point or marker arguments, BEG and END. \(fn BEG END)" t nil) ;;;*** ;;;### (autoloads (spam-initialize) "spam" "gnus/spam.el" (19259 ;;;;;; 35430)) ;;; Generated autoloads from gnus/spam.el (autoload 'spam-initialize "spam" "\ Install the spam.el hooks and do other initialization. When SYMBOLS is given, set those variables to t. This is so you can call `spam-initialize' before you set spam-use-* variables on explicitly, and matters only if you need the extra headers installed through `spam-necessary-extra-headers'. \(fn &rest SYMBOLS)" t nil) ;;;*** ;;;### (autoloads (spam-report-deagentize spam-report-agentize spam-report-url-to-file ;;;;;; spam-report-url-ping-mm-url spam-report-process-queue) "spam-report" ;;;;;; "gnus/spam-report.el" (19259 35430)) ;;; Generated autoloads from gnus/spam-report.el (autoload 'spam-report-process-queue "spam-report" "\ Report all queued requests from `spam-report-requests-file'. If FILE is given, use it instead of `spam-report-requests-file'. If KEEP is t, leave old requests in the file. If KEEP is the symbol `ask', query before flushing the queue file. \(fn &optional FILE KEEP)" t nil) (autoload 'spam-report-url-ping-mm-url "spam-report" "\ Ping a host through HTTP, addressing a specific GET resource. Use the external program specified in `mm-url-program' to connect to server. \(fn HOST REPORT)" nil nil) (autoload 'spam-report-url-to-file "spam-report" "\ Collect spam report requests in `spam-report-requests-file'. Customize `spam-report-url-ping-function' to use this function. \(fn HOST REPORT)" nil nil) (autoload 'spam-report-agentize "spam-report" "\ Add spam-report support to the Agent. Spam reports will be queued with \\[spam-report-url-to-file] when the Agent is unplugged, and will be submitted in a batch when the Agent is plugged. \(fn)" t nil) (autoload 'spam-report-deagentize "spam-report" "\ Remove spam-report support from the Agent. Spam reports will be queued with the method used when \\[spam-report-agentize] was run. \(fn)" t nil) ;;;*** ;;;### (autoloads (speedbar-get-focus speedbar-frame-mode) "speedbar" ;;;;;; "speedbar.el" (19259 35430)) ;;; Generated autoloads from speedbar.el (defalias 'speedbar 'speedbar-frame-mode) (autoload 'speedbar-frame-mode "speedbar" "\ Enable or disable speedbar. Positive ARG means turn on, negative turn off. A nil ARG means toggle. Once the speedbar frame is activated, a buffer in `speedbar-mode' will be displayed. Currently, only one speedbar is supported at a time. `speedbar-before-popup-hook' is called before popping up the speedbar frame. `speedbar-before-delete-hook' is called before the frame is deleted. \(fn &optional ARG)" t nil) (autoload 'speedbar-get-focus "speedbar" "\ Change frame focus to or from the speedbar frame. If the selected frame is not speedbar, then speedbar frame is selected. If the speedbar frame is active, then select the attached frame. \(fn)" t nil) ;;;*** ;;;### (autoloads (spell-string spell-region spell-word spell-buffer) ;;;;;; "spell" "textmodes/spell.el" (19259 35430)) ;;; Generated autoloads from textmodes/spell.el (put 'spell-filter 'risky-local-variable t) (autoload 'spell-buffer "spell" "\ Check spelling of every word in the buffer. For each incorrect word, you are asked for the correct spelling and then put into a query-replace to fix some or all occurrences. If you do not want to change a word, just give the same word as its \"correct\" spelling; then the query replace is skipped. \(fn)" t nil) (make-obsolete 'spell-buffer 'ispell-buffer "23.1") (autoload 'spell-word "spell" "\ Check spelling of word at or before point. If it is not correct, ask user for the correct spelling and `query-replace' the entire buffer to substitute it. \(fn)" t nil) (make-obsolete 'spell-word 'ispell-word "23.1") (autoload 'spell-region "spell" "\ Like `spell-buffer' but applies only to region. Used in a program, applies from START to END. DESCRIPTION is an optional string naming the unit being checked: for example, \"word\". \(fn START END &optional DESCRIPTION)" t nil) (make-obsolete 'spell-region 'ispell-region "23.1") (autoload 'spell-string "spell" "\ Check spelling of string supplied as argument. \(fn STRING)" t nil) (make-obsolete 'spell-string "The `spell' package is obsolete - use `ispell'." "23.1") ;;;*** ;;;### (autoloads (snarf-spooks spook) "spook" "play/spook.el" (19259 ;;;;;; 35430)) ;;; Generated autoloads from play/spook.el (autoload 'spook "spook" "\ Adds that special touch of class to your outgoing mail. \(fn)" t nil) (autoload 'snarf-spooks "spook" "\ Return a vector containing the lines from `spook-phrases-file'. \(fn)" nil nil) ;;;*** ;;;### (autoloads (sql-linter sql-db2 sql-interbase sql-postgres ;;;;;; sql-ms sql-ingres sql-solid sql-mysql sql-sqlite sql-informix ;;;;;; sql-sybase sql-oracle sql-product-interactive sql-mode sql-help ;;;;;; sql-add-product-keywords) "sql" "progmodes/sql.el" (19259 ;;;;;; 35430)) ;;; Generated autoloads from progmodes/sql.el (autoload 'sql-add-product-keywords "sql" "\ Add highlighting KEYWORDS for SQL PRODUCT. PRODUCT should be a symbol, the name of a sql product, such as `oracle'. KEYWORDS should be a list; see the variable `font-lock-keywords'. By default they are added at the beginning of the current highlighting list. If optional argument APPEND is `set', they are used to replace the current highlighting list. If APPEND is any other non-nil value, they are added at the end of the current highlighting list. For example: (sql-add-product-keywords 'ms '((\"\\\\b\\\\w+_t\\\\b\" . font-lock-type-face))) adds a fontification pattern to fontify identifiers ending in `_t' as data types. \(fn PRODUCT KEYWORDS &optional APPEND)" nil nil) (autoload 'sql-help "sql" "\ Show short help for the SQL modes. Use an entry function to open an interactive SQL buffer. This buffer is usually named `*SQL*'. The name of the major mode is SQLi. Use the following commands to start a specific SQL interpreter: PostGres: \\[sql-postgres] MySQL: \\[sql-mysql] SQLite: \\[sql-sqlite] Other non-free SQL implementations are also supported: Solid: \\[sql-solid] Oracle: \\[sql-oracle] Informix: \\[sql-informix] Sybase: \\[sql-sybase] Ingres: \\[sql-ingres] Microsoft: \\[sql-ms] DB2: \\[sql-db2] Interbase: \\[sql-interbase] Linter: \\[sql-linter] But we urge you to choose a free implementation instead of these. Once you have the SQLi buffer, you can enter SQL statements in the buffer. The output generated is appended to the buffer and a new prompt is generated. See the In/Out menu in the SQLi buffer for some functions that help you navigate through the buffer, the input history, etc. If you have a really complex SQL statement or if you are writing a procedure, you can do this in a separate buffer. Put the new buffer in `sql-mode' by calling \\[sql-mode]. The name of this buffer can be anything. The name of the major mode is SQL. In this SQL buffer (SQL mode), you can send the region or the entire buffer to the interactive SQL buffer (SQLi mode). The results are appended to the SQLi buffer without disturbing your SQL buffer. \(fn)" t nil) (autoload 'sql-mode "sql" "\ Major mode to edit SQL. You can send SQL statements to the SQLi buffer using \\[sql-send-region]. Such a buffer must exist before you can do this. See `sql-help' on how to create SQLi buffers. \\{sql-mode-map} Customization: Entry to this mode runs the `sql-mode-hook'. When you put a buffer in SQL mode, the buffer stores the last SQLi buffer created as its destination in the variable `sql-buffer'. This will be the buffer \\[sql-send-region] sends the region to. If this SQLi buffer is killed, \\[sql-send-region] is no longer able to determine where the strings should be sent to. You can set the value of `sql-buffer' using \\[sql-set-sqli-buffer]. For information on how to create multiple SQLi buffers, see `sql-interactive-mode'. Note that SQL doesn't have an escape character unless you specify one. If you specify backslash as escape character in SQL, you must tell Emacs. Here's how to do that in your `~/.emacs' file: \(add-hook 'sql-mode-hook (lambda () (modify-syntax-entry ?\\\\ \".\" sql-mode-syntax-table))) \(fn)" t nil) (autoload 'sql-product-interactive "sql" "\ Run product interpreter as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn &optional PRODUCT)" t nil) (autoload 'sql-oracle "sql" "\ Run sqlplus by Oracle as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-oracle-program'. Login uses the variables `sql-user', `sql-password', and `sql-database' as defaults, if set. Additional command line parameters can be stored in the list `sql-oracle-options'. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-oracle]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-sybase "sql" "\ Run isql by SyBase as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-sybase-program'. Login uses the variables `sql-server', `sql-user', `sql-password', and `sql-database' as defaults, if set. Additional command line parameters can be stored in the list `sql-sybase-options'. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-sybase]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-informix "sql" "\ Run dbaccess by Informix as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-informix-program'. Login uses the variable `sql-database' as default, if set. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-informix]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-sqlite "sql" "\ Run sqlite as an inferior process. SQLite is free software. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-sqlite-program'. Login uses the variables `sql-user', `sql-password', `sql-database', and `sql-server' as defaults, if set. Additional command line parameters can be stored in the list `sql-sqlite-options'. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-sqlite]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-mysql "sql" "\ Run mysql by TcX as an inferior process. Mysql versions 3.23 and up are free software. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-mysql-program'. Login uses the variables `sql-user', `sql-password', `sql-database', and `sql-server' as defaults, if set. Additional command line parameters can be stored in the list `sql-mysql-options'. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-mysql]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-solid "sql" "\ Run solsql by Solid as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-solid-program'. Login uses the variables `sql-user', `sql-password', and `sql-server' as defaults, if set. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-solid]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-ingres "sql" "\ Run sql by Ingres as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-ingres-program'. Login uses the variable `sql-database' as default, if set. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-ingres]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-ms "sql" "\ Run osql by Microsoft as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-ms-program'. Login uses the variables `sql-user', `sql-password', `sql-database', and `sql-server' as defaults, if set. Additional command line parameters can be stored in the list `sql-ms-options'. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-ms]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-postgres "sql" "\ Run psql by Postgres as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-postgres-program'. Login uses the variables `sql-database' and `sql-server' as default, if set. Additional command line parameters can be stored in the list `sql-postgres-options'. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-postgres]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. If your output lines end with ^M, your might try undecided-dos as a coding system. If this doesn't help, Try to set `comint-output-filter-functions' like this: \(setq comint-output-filter-functions (append comint-output-filter-functions '(comint-strip-ctrl-m))) \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-interbase "sql" "\ Run isql by Interbase as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-interbase-program'. Login uses the variables `sql-user', `sql-password', and `sql-database' as defaults, if set. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-interbase]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-db2 "sql" "\ Run db2 by IBM as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-db2-program'. There is not automatic login. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. If you use \\[sql-accumulate-and-indent] to send multiline commands to db2, newlines will be escaped if necessary. If you don't want that, set `comint-input-sender' back to `comint-simple-send' by writing an after advice. See the elisp manual for more information. To specify a coding system for converting non-ASCII characters in the input and output to the process, use \\[universal-coding-system-argument] before \\[sql-db2]. You can also specify this with \\[set-buffer-process-coding-system] in the SQL buffer, after you start the process. The default comes from `process-coding-system-alist' and `default-process-coding-system'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) (autoload 'sql-linter "sql" "\ Run inl by RELEX as an inferior process. If buffer `*SQL*' exists but no process is running, make a new process. If buffer exists and a process is running, just switch to buffer `*SQL*'. Interpreter used comes from variable `sql-linter-program' - usually `inl'. Login uses the variables `sql-user', `sql-password', `sql-database' and `sql-server' as defaults, if set. Additional command line parameters can be stored in the list `sql-linter-options'. Run inl -h to get help on parameters. `sql-database' is used to set the LINTER_MBX environment variable for local connections, `sql-server' refers to the server name from the `nodetab' file for the network connection (dbc_tcp or friends must run for this to work). If `sql-password' is an empty string, inl will use an empty password. The buffer is put in sql-interactive-mode, giving commands for sending input. See `sql-interactive-mode'. \(Type \\[describe-mode] in the SQL buffer for a list of commands.) \(fn)" t nil) ;;;*** ;;;### (autoloads (srecode-template-mode) "srecode/srt-mode" "cedet/srecode/srt-mode.el" ;;;;;; (19259 35430)) ;;; Generated autoloads from cedet/srecode/srt-mode.el (autoload 'srecode-template-mode "srecode/srt-mode" "\ Major-mode for writing SRecode macros. \(fn)" t nil) (defalias 'srt-mode 'srecode-template-mode) ;;;*** ;;;### (autoloads (strokes-compose-complex-stroke strokes-decode-buffer ;;;;;; strokes-mode strokes-list-strokes strokes-load-user-strokes ;;;;;; strokes-help strokes-describe-stroke strokes-do-complex-stroke ;;;;;; strokes-do-stroke strokes-read-complex-stroke strokes-read-stroke ;;;;;; strokes-global-set-stroke) "strokes" "strokes.el" (19259 ;;;;;; 35430)) ;;; Generated autoloads from strokes.el (autoload 'strokes-global-set-stroke "strokes" "\ Interactively give STROKE the global binding as COMMAND. Operated just like `global-set-key', except for strokes. COMMAND is a symbol naming an interactively-callable function. STROKE is a list of sampled positions on the stroke grid as described in the documentation for the `strokes-define-stroke' function. See also `strokes-global-set-stroke-string'. \(fn STROKE COMMAND)" t nil) (autoload 'strokes-read-stroke "strokes" "\ Read a simple stroke (interactively) and return the stroke. Optional PROMPT in minibuffer displays before and during stroke reading. This function will display the stroke interactively as it is being entered in the strokes buffer if the variable `strokes-use-strokes-buffer' is non-nil. Optional EVENT is acceptable as the starting event of the stroke. \(fn &optional PROMPT EVENT)" nil nil) (autoload 'strokes-read-complex-stroke "strokes" "\ Read a complex stroke (interactively) and return the stroke. Optional PROMPT in minibuffer displays before and during stroke reading. Note that a complex stroke allows the user to pen-up and pen-down. This is implemented by allowing the user to paint with button 1 or button 2 and then complete the stroke with button 3. Optional EVENT is acceptable as the starting event of the stroke. \(fn &optional PROMPT EVENT)" nil nil) (autoload 'strokes-do-stroke "strokes" "\ Read a simple stroke from the user and then execute its command. This must be bound to a mouse event. \(fn EVENT)" t nil) (autoload 'strokes-do-complex-stroke "strokes" "\ Read a complex stroke from the user and then execute its command. This must be bound to a mouse event. \(fn EVENT)" t nil) (autoload 'strokes-describe-stroke "strokes" "\ Displays the command which STROKE maps to, reading STROKE interactively. \(fn STROKE)" t nil) (autoload 'strokes-help "strokes" "\ Get instruction on using the Strokes package. \(fn)" t nil) (autoload 'strokes-load-user-strokes "strokes" "\ Load user-defined strokes from file named by `strokes-file'. \(fn)" t nil) (autoload 'strokes-list-strokes "strokes" "\ Pop up a buffer containing an alphabetical listing of strokes in STROKES-MAP. With CHRONOLOGICAL prefix arg (\\[universal-argument]) list strokes chronologically by command name. If STROKES-MAP is not given, `strokes-global-map' will be used instead. \(fn &optional CHRONOLOGICAL STROKES-MAP)" t nil) (defvar strokes-mode nil "\ Non-nil if Strokes mode is enabled. See the command `strokes-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `strokes-mode'.") (custom-autoload 'strokes-mode "strokes" nil) (autoload 'strokes-mode "strokes" "\ Toggle Strokes global minor mode.\\<strokes-mode-map> With ARG, turn strokes on if and only if ARG is positive. Strokes are pictographic mouse gestures which invoke commands. Strokes are invoked with \\[strokes-do-stroke]. You can define new strokes with \\[strokes-global-set-stroke]. See also \\[strokes-do-complex-stroke] for `complex' strokes. To use strokes for pictographic editing, such as Chinese/Japanese, use \\[strokes-compose-complex-stroke], which draws strokes and inserts them. Encode/decode your strokes with \\[strokes-encode-buffer], \\[strokes-decode-buffer]. \\{strokes-mode-map} \(fn &optional ARG)" t nil) (autoload 'strokes-decode-buffer "strokes" "\ Decode stroke strings in BUFFER and display their corresponding glyphs. Optional BUFFER defaults to the current buffer. Optional FORCE non-nil will ignore the buffer's read-only status. \(fn &optional BUFFER FORCE)" t nil) (autoload 'strokes-compose-complex-stroke "strokes" "\ Read a complex stroke and insert its glyph into the current buffer. \(fn)" t nil) ;;;*** ;;;### (autoloads (studlify-buffer studlify-word studlify-region) ;;;;;; "studly" "play/studly.el" (19259 35430)) ;;; Generated autoloads from play/studly.el (autoload 'studlify-region "studly" "\ Studlify-case the region. \(fn BEGIN END)" t nil) (autoload 'studlify-word "studly" "\ Studlify-case the current word, or COUNT words if given an argument. \(fn COUNT)" t nil) (autoload 'studlify-buffer "studly" "\ Studlify-case the current buffer. \(fn)" t nil) ;;;*** ;;;### (autoloads (global-subword-mode subword-mode) "subword" "progmodes/subword.el" ;;;;;; (19259 35430)) ;;; Generated autoloads from progmodes/subword.el (autoload 'subword-mode "subword" "\ Mode enabling subword movement and editing keys. In spite of GNU Coding Standards, it is popular to name a symbol by mixing uppercase and lowercase letters, e.g. \"GtkWidget\", \"EmacsFrameClass\", \"NSGraphicsContext\", etc. Here we call these mixed case symbols `nomenclatures'. Also, each capitalized (or completely uppercase) part of a nomenclature is called a `subword'. Here are some examples: Nomenclature Subwords =========================================================== GtkWindow => \"Gtk\" and \"Window\" EmacsFrameClass => \"Emacs\", \"Frame\" and \"Class\" NSGraphicsContext => \"NS\", \"Graphics\" and \"Context\" The subword oriented commands activated in this minor mode recognize subwords in a nomenclature to move between subwords and to edit them as words. \\{subword-mode-map} \(fn &optional ARG)" t nil) (defvar global-subword-mode nil "\ Non-nil if Global-Subword mode is enabled. See the command `global-subword-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-subword-mode'.") (custom-autoload 'global-subword-mode "subword" nil) (autoload 'global-subword-mode "subword" "\ Toggle Subword mode in every possible buffer. With prefix ARG, turn Global-Subword mode on if and only if ARG is positive. Subword mode is enabled in all buffers where `(lambda nil (subword-mode 1))' would do it. See `subword-mode' for more information on Subword mode. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (sc-cite-original) "supercite" "mail/supercite.el" ;;;;;; (19259 35430)) ;;; Generated autoloads from mail/supercite.el (autoload 'sc-cite-original "supercite" "\ Workhorse citing function which performs the initial citation. This is callable from the various mail and news readers' reply function according to the agreed upon standard. See the associated info node `(SC)Top' for more details. `sc-cite-original' does not do any yanking of the original message but it does require a few things: 1) The reply buffer is the current buffer. 2) The original message has been yanked and inserted into the reply buffer. 3) Verbose mail headers from the original message have been inserted into the reply buffer directly before the text of the original message. 4) Point is at the beginning of the verbose headers. 5) Mark is at the end of the body of text to be cited. The region need not be active (and typically isn't when this function is called). Also, the hook `sc-pre-hook' is run before, and `sc-post-hook' is run after the guts of this function. \(fn)" nil nil) ;;;*** ;;;### (autoloads (gpm-mouse-mode) "t-mouse" "t-mouse.el" (19259 ;;;;;; 35431)) ;;; Generated autoloads from t-mouse.el (define-obsolete-function-alias 't-mouse-mode 'gpm-mouse-mode "23.1") (defvar gpm-mouse-mode t "\ Non-nil if Gpm-Mouse mode is enabled. See the command `gpm-mouse-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `gpm-mouse-mode'.") (custom-autoload 'gpm-mouse-mode "t-mouse" nil) (autoload 'gpm-mouse-mode "t-mouse" "\ Toggle gpm-mouse mode to use the mouse in GNU/Linux consoles. With prefix arg, turn gpm-mouse mode on if arg is positive, otherwise turn it off. This allows the use of the mouse when operating on a GNU/Linux console, in the same way as you can use the mouse under X11. It relies on the `gpm' daemon being activated. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (tabify untabify) "tabify" "tabify.el" (19259 35430)) ;;; Generated autoloads from tabify.el (autoload 'untabify "tabify" "\ Convert all tabs in region to multiple spaces, preserving columns. Called non-interactively, the region is specified by arguments START and END, rather than by the position of point and mark. The variable `tab-width' controls the spacing of tab stops. \(fn START END)" t nil) (autoload 'tabify "tabify" "\ Convert multiple spaces in region to tabs when possible. A group of spaces is partially replaced by tabs when this can be done without changing the column they end at. Called non-interactively, the region is specified by arguments START and END, rather than by the position of point and mark. The variable `tab-width' controls the spacing of tab stops. \(fn START END)" t nil) ;;;*** ;;;### (autoloads (table-release table-capture table-delete-column ;;;;;; table-delete-row table-insert-sequence table-generate-source ;;;;;; table-query-dimension table-fixed-width-mode table-justify-column ;;;;;; table-justify-row table-justify-cell table-justify table-split-cell ;;;;;; table-split-cell-horizontally table-split-cell-vertically ;;;;;; table-span-cell table-backward-cell table-forward-cell table-narrow-cell ;;;;;; table-widen-cell table-shorten-cell table-heighten-cell table-unrecognize-cell ;;;;;; table-recognize-cell table-unrecognize-table table-recognize-table ;;;;;; table-unrecognize-region table-recognize-region table-unrecognize ;;;;;; table-recognize table-insert-row-column table-insert-column ;;;;;; table-insert-row table-insert table-point-left-cell-hook ;;;;;; table-point-entered-cell-hook table-load-hook table-cell-map-hook) ;;;;;; "table" "textmodes/table.el" (19259 35430)) ;;; Generated autoloads from textmodes/table.el (defvar table-cell-map-hook nil "\ *Normal hooks run when finishing construction of `table-cell-map'. User can modify `table-cell-map' by adding custom functions here.") (custom-autoload 'table-cell-map-hook "table" t) (defvar table-load-hook nil "\ *List of functions to be called after the table is first loaded.") (custom-autoload 'table-load-hook "table" t) (defvar table-point-entered-cell-hook nil "\ *List of functions to be called after point entered a table cell.") (custom-autoload 'table-point-entered-cell-hook "table" t) (defvar table-point-left-cell-hook nil "\ *List of functions to be called after point left a table cell.") (custom-autoload 'table-point-left-cell-hook "table" t) (autoload 'table-insert "table" "\ Insert an editable text table. Insert a table of specified number of COLUMNS and ROWS. Optional parameter CELL-WIDTH and CELL-HEIGHT can specify the size of each cell. The cell size is uniform across the table if the specified size is a number. They can be a list of numbers to specify different size for each cell. When called interactively, the list of number is entered by simply listing all the numbers with space characters delimiting them. Examples: \\[table-insert] inserts a table at the current point location. Suppose we have the following situation where `-!-' indicates the location of point. -!- Type \\[table-insert] and hit ENTER key. As it asks table specification, provide 3 for number of columns, 1 for number of rows, 5 for cell width and 1 for cell height. Now you shall see the next table and the point is automatically moved to the beginning of the first cell. +-----+-----+-----+ |-!- | | | +-----+-----+-----+ Inside a table cell, there are special key bindings. \\<table-cell-map> M-9 \\[table-widen-cell] (or \\[universal-argument] 9 \\[table-widen-cell]) widens the first cell by 9 character width, which results as +--------------+-----+-----+ |-!- | | | +--------------+-----+-----+ Type TAB \\[table-widen-cell] then type TAB M-2 M-7 \\[table-widen-cell] (or \\[universal-argument] 2 7 \\[table-widen-cell]). Typing TAB moves the point forward by a cell. The result now looks like this: +--------------+------+--------------------------------+ | | |-!- | +--------------+------+--------------------------------+ If you knew each width of the columns prior to the table creation, what you could have done better was to have had given the complete width information to `table-insert'. Cell width(s): 14 6 32 instead of Cell width(s): 5 This would have eliminated the previously mentioned width adjustment work all together. If the point is in the last cell type S-TAB S-TAB to move it to the first cell. Now type \\[table-heighten-cell] which heighten the row by a line. +--------------+------+--------------------------------+ |-!- | | | | | | | +--------------+------+--------------------------------+ Type \\[table-insert-row-column] and tell it to insert a row. +--------------+------+--------------------------------+ |-!- | | | | | | | +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ Move the point under the table as shown below. +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ -!- Type M-x table-insert-row instead of \\[table-insert-row-column]. \\[table-insert-row-column] does not work when the point is outside of the table. This insertion at outside of the table effectively appends a row at the end. +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ |-!- | | | | | | | +--------------+------+--------------------------------+ Text editing inside the table cell produces reasonably expected results. +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ | | |Text editing inside the table | | | |cell produces reasonably | | | |expected results.-!- | +--------------+------+--------------------------------+ | | | | | | | | +--------------+------+--------------------------------+ Inside a table cell has a special keymap. \\{table-cell-map} \(fn COLUMNS ROWS &optional CELL-WIDTH CELL-HEIGHT)" t nil) (autoload 'table-insert-row "table" "\ Insert N table row(s). When point is in a table the newly inserted row(s) are placed above the current row. When point is outside of the table it must be below the table within the table width range, then the newly created row(s) are appended at the bottom of the table. \(fn N)" t nil) (autoload 'table-insert-column "table" "\ Insert N table column(s). When point is in a table the newly inserted column(s) are placed left of the current column. When point is outside of the table it must be right side of the table within the table height range, then the newly created column(s) are appended at the right of the table. \(fn N)" t nil) (autoload 'table-insert-row-column "table" "\ Insert row(s) or column(s). See `table-insert-row' and `table-insert-column'. \(fn ROW-COLUMN N)" t nil) (autoload 'table-recognize "table" "\ Recognize all tables within the current buffer and activate them. Scans the entire buffer and recognizes valid table cells. If the optional numeric prefix argument ARG is negative the tables in the buffer become inactive, meaning the tables become plain text and loses all the table specific features. \(fn &optional ARG)" t nil) (autoload 'table-unrecognize "table" "\ Not documented \(fn)" t nil) (autoload 'table-recognize-region "table" "\ Recognize all tables within region. BEG and END specify the region to work on. If the optional numeric prefix argument ARG is negative the tables in the region become inactive, meaning the tables become plain text and lose all the table specific features. \(fn BEG END &optional ARG)" t nil) (autoload 'table-unrecognize-region "table" "\ Not documented \(fn BEG END)" t nil) (autoload 'table-recognize-table "table" "\ Recognize a table at point. If the optional numeric prefix argument ARG is negative the table becomes inactive, meaning the table becomes plain text and loses all the table specific features. \(fn &optional ARG)" t nil) (autoload 'table-unrecognize-table "table" "\ Not documented \(fn)" t nil) (autoload 'table-recognize-cell "table" "\ Recognize a table cell that contains current point. Probe the cell dimension and prepare the cell information. The optional two arguments FORCE and NO-COPY are for internal use only and must not be specified. When the optional numeric prefix argument ARG is negative the cell becomes inactive, meaning that the cell becomes plain text and loses all the table specific features. \(fn &optional FORCE NO-COPY ARG)" t nil) (autoload 'table-unrecognize-cell "table" "\ Not documented \(fn)" t nil) (autoload 'table-heighten-cell "table" "\ Heighten the current cell by N lines by expanding the cell vertically. Heightening is done by adding blank lines at the bottom of the current cell. Other cells aligned horizontally with the current one are also heightened in order to keep the rectangular table structure. The optional argument NO-COPY is internal use only and must not be specified. \(fn N &optional NO-COPY NO-UPDATE)" t nil) (autoload 'table-shorten-cell "table" "\ Shorten the current cell by N lines by shrinking the cell vertically. Shortening is done by removing blank lines from the bottom of the cell and possibly from the top of the cell as well. Therefor, the cell must have some bottom/top blank lines to be shorten effectively. This is applicable to all the cells aligned horizontally with the current one because they are also shortened in order to keep the rectangular table structure. \(fn N)" t nil) (autoload 'table-widen-cell "table" "\ Widen the current cell by N columns and expand the cell horizontally. Some other cells in the same table are widen as well to keep the table's rectangle structure. \(fn N &optional NO-COPY NO-UPDATE)" t nil) (autoload 'table-narrow-cell "table" "\ Narrow the current cell by N columns and shrink the cell horizontally. Some other cells in the same table are narrowed as well to keep the table's rectangle structure. \(fn N)" t nil) (autoload 'table-forward-cell "table" "\ Move point forward to the beginning of the next cell. With argument ARG, do it ARG times; a negative argument ARG = -N means move backward N cells. Do not specify NO-RECOGNIZE and UNRECOGNIZE. They are for internal use only. Sample Cell Traveling Order (In Irregular Table Cases) You can actually try how it works in this buffer. Press \\[table-recognize] and go to cells in the following tables and press \\[table-forward-cell] or TAB key. +-----+--+ +--+-----+ +--+--+--+ +--+--+--+ +---------+ +--+---+--+ |0 |1 | |0 |1 | |0 |1 |2 | |0 |1 |2 | |0 | |0 |1 |2 | +--+--+ | | +--+--+ +--+ | | | | +--+ +----+----+ +--+-+-+--+ |2 |3 | | | |2 |3 | |3 +--+ | | +--+3 | |1 |2 | |3 |4 | | +--+--+ +--+--+ | +--+4 | | | |4 +--+ +--+-+-+--+ +----+----+ | |4 | |4 | | |5 | | | | | |5 | |3 |4 |5 | |5 | +--+-----+ +-----+--+ +--+--+--+ +--+--+--+ +--+---+--+ +---------+ +--+--+--+ +--+--+--+ +--+--+--+ +--+--+--+ |0 |1 |2 | |0 |1 |2 | |0 |1 |2 | |0 |1 |2 | | | | | | +--+ | | | | | +--+ +--+ +--+ +--+ +--+3 +--+ | +--+ | |3 +--+4 | |3 | |4 | |4 +--+5 | | |3 | | +--+5 +--+ | | | | | |6 | | | | | | |6 | |7 | +--+--+--+ +--+--+--+ +--+--+--+ +--+--+--+ +--+--+--+ +--+--+--+ +--+--+--+--+ +--+-----+--+ +--+--+--+--+ |0 |1 |2 | |0 |1 |2 | |0 |1 |2 |3 | |0 |1 |2 | |0 |1 |2 |3 | | +--+ | | +--+ | | +--+--+ | | | | | | +--+--+ | | |3 +--+ +--+3 | | +--+4 +--+ +--+ +--+ +--+4 +--+ +--+ |4 | |4 | +--+ |5 +--+--+6 | |3 +--+--+4 | |5 | |6 | |5 +--+ | | +--+5 | | |7 |8 | | | |5 |6 | | | | | | | |6 | | | |6 | | +--+--+--+--+ +--+--+--+--+ +--+-----+--+ +--+--+--+ +--+--+--+ \(fn &optional ARG NO-RECOGNIZE UNRECOGNIZE)" t nil) (autoload 'table-backward-cell "table" "\ Move backward to the beginning of the previous cell. With argument ARG, do it ARG times; a negative argument ARG = -N means move forward N cells. \(fn &optional ARG)" t nil) (autoload 'table-span-cell "table" "\ Span current cell into adjacent cell in DIRECTION. DIRECTION is one of symbols; right, left, above or below. \(fn DIRECTION)" t nil) (autoload 'table-split-cell-vertically "table" "\ Split current cell vertically. Creates a cell above and a cell below the current point location. \(fn)" t nil) (autoload 'table-split-cell-horizontally "table" "\ Split current cell horizontally. Creates a cell on the left and a cell on the right of the current point location. \(fn)" t nil) (autoload 'table-split-cell "table" "\ Split current cell in ORIENTATION. ORIENTATION is a symbol either horizontally or vertically. \(fn ORIENTATION)" t nil) (autoload 'table-justify "table" "\ Justify contents of a cell, a row of cells or a column of cells. WHAT is a symbol 'cell, 'row or 'column. JUSTIFY is a symbol 'left, 'center, 'right, 'top, 'middle, 'bottom or 'none. \(fn WHAT JUSTIFY)" t nil) (autoload 'table-justify-cell "table" "\ Justify cell contents. JUSTIFY is a symbol 'left, 'center or 'right for horizontal, or 'top, 'middle, 'bottom or 'none for vertical. When optional PARAGRAPH is non-nil the justify operation is limited to the current paragraph, otherwise the entire cell contents is justified. \(fn JUSTIFY &optional PARAGRAPH)" t nil) (autoload 'table-justify-row "table" "\ Justify cells of a row. JUSTIFY is a symbol 'left, 'center or 'right for horizontal, or top, 'middle, 'bottom or 'none for vertical. \(fn JUSTIFY)" t nil) (autoload 'table-justify-column "table" "\ Justify cells of a column. JUSTIFY is a symbol 'left, 'center or 'right for horizontal, or top, 'middle, 'bottom or 'none for vertical. \(fn JUSTIFY)" t nil) (autoload 'table-fixed-width-mode "table" "\ Toggle fixing width mode. In the fixed width mode, typing inside a cell never changes the cell width where in the normal mode the cell width expands automatically in order to prevent a word being folded into multiple lines. \(fn &optional ARG)" t nil) (autoload 'table-query-dimension "table" "\ Return the dimension of the current cell and the current table. The result is a list (cw ch tw th c r cells) where cw is the cell width, ch is the cell height, tw is the table width, th is the table height, c is the number of columns, r is the number of rows and cells is the total number of cells. The cell dimension excludes the cell frame while the table dimension includes the table frame. The columns and the rows are counted by the number of cell boundaries. Therefore the number tends to be larger than it appears for the tables with non-uniform cell structure (heavily spanned and split). When optional WHERE is provided the cell and table at that location is reported. \(fn &optional WHERE)" t nil) (autoload 'table-generate-source "table" "\ Generate source of the current table in the specified language. LANGUAGE is a symbol that specifies the language to describe the structure of the table. It must be either 'html, 'latex or 'cals. The resulted source text is inserted into DEST-BUFFER and the buffer object is returned. When DEST-BUFFER is omitted or nil the default buffer specified in `table-dest-buffer-name' is used. In this case the content of the default buffer is erased prior to the generation. When DEST-BUFFER is non-nil it is expected to be either a destination buffer or a name of the destination buffer. In this case the generated result is inserted at the current point in the destination buffer and the previously existing contents in the buffer are untouched. References used for this implementation: HTML: URL `http://www.w3.org' LaTeX: URL `http://www.maths.tcd.ie/~dwilkins/LaTeXPrimer/Tables.html' CALS (DocBook DTD): URL `http://www.oasis-open.org/html/a502.htm' URL `http://www.oreilly.com/catalog/docbook/chapter/book/table.html#AEN114751' \(fn LANGUAGE &optional DEST-BUFFER CAPTION)" t nil) (autoload 'table-insert-sequence "table" "\ Travel cells forward while inserting a specified sequence string in each cell. STR is the base string from which the sequence starts. When STR is an empty string then each cell content is erased. When STR ends with numerical characters (they may optionally be surrounded by a pair of parentheses) they are incremented as a decimal number. Otherwise the last character in STR is incremented in ASCII code order. N is the number of sequence elements to insert. When N is negative the cell traveling direction is backward. When N is zero it travels forward entire table. INCREMENT is the increment between adjacent sequence elements and can be a negative number for effectively decrementing. INTERVAL is the number of cells to travel between sequence element insertion which is normally 1. When zero or less is given for INTERVAL it is interpreted as number of cells per row so that sequence is placed straight down vertically as long as the table's cell structure is uniform. JUSTIFY is one of the symbol 'left, 'center or 'right, that specifies justification of the inserted string. Example: (progn (table-insert 16 3 5 1) (table-forward-cell 15) (table-insert-sequence \"D0\" -16 1 1 'center) (table-forward-cell 16) (table-insert-sequence \"A[0]\" -16 1 1 'center) (table-forward-cell 1) (table-insert-sequence \"-\" 16 0 1 'center)) (progn (table-insert 16 8 5 1) (table-insert-sequence \"@\" 0 1 2 'right) (table-forward-cell 1) (table-insert-sequence \"64\" 0 1 2 'left)) \(fn STR N INCREMENT INTERVAL JUSTIFY)" t nil) (autoload 'table-delete-row "table" "\ Delete N row(s) of cells. Delete N rows of cells from current row. The current row is the row contains the current cell where point is located. Each row must consists from cells of same height. \(fn N)" t nil) (autoload 'table-delete-column "table" "\ Delete N column(s) of cells. Delete N columns of cells from current column. The current column is the column contains the current cell where point is located. Each column must consists from cells of same width. \(fn N)" t nil) (autoload 'table-capture "table" "\ Convert plain text into a table by capturing the text in the region. Create a table with the text in region as cell contents. BEG and END specify the region. The text in the region is replaced with a table. The removed text is inserted in the table. When optional COL-DELIM-REGEXP and ROW-DELIM-REGEXP are provided the region contents is parsed and separated into individual cell contents by using the delimiter regular expressions. This parsing determines the number of columns and rows of the table automatically. If COL-DELIM-REGEXP and ROW-DELIM-REGEXP are omitted the result table has only one cell and the entire region contents is placed in that cell. Optional JUSTIFY is one of 'left, 'center or 'right, which specifies the cell justification. Optional MIN-CELL-WIDTH specifies the minimum cell width. Optional COLUMNS specify the number of columns when ROW-DELIM-REGEXP is not specified. Example 1: 1, 2, 3, 4 5, 6, 7, 8 , 9, 10 Running `table-capture' on above 3 line region with COL-DELIM-REGEXP \",\" and ROW-DELIM-REGEXP \"\\n\" creates the following table. In this example the cells are centered and minimum cell width is specified as 5. +-----+-----+-----+-----+ | 1 | 2 | 3 | 4 | +-----+-----+-----+-----+ | 5 | 6 | 7 | 8 | +-----+-----+-----+-----+ | | 9 | 10 | | +-----+-----+-----+-----+ Note: In case the function is called interactively user must use \\[quoted-insert] `quoted-insert' in order to enter \"\\n\" successfully. COL-DELIM-REGEXP at the end of each row is optional. Example 2: This example shows how a table can be used for text layout editing. Let `table-capture' capture the following region starting from -!- and ending at -*-, that contains three paragraphs and two item name headers. This time specify empty string for both COL-DELIM-REGEXP and ROW-DELIM-REGEXP. -!-`table-capture' is a powerful command however mastering its power requires some practice. Here is a list of items what it can do. Parse Cell Items By using column delimiter regular expression and raw delimiter regular expression, it parses the specified text area and extracts cell items from non-table text and then forms a table out of them. Capture Text Area When no delimiters are specified it creates a single cell table. The text in the specified region is placed in that cell.-*- Now the entire content is captured in a cell which is itself a table like this. +-----------------------------------------------------------------+ |`table-capture' is a powerful command however mastering its power| |requires some practice. Here is a list of items what it can do. | | | |Parse Cell Items By using column delimiter regular | | expression and raw delimiter regular | | expression, it parses the specified text | | area and extracts cell items from | | non-table text and then forms a table out | | of them. | | | |Capture Text Area When no delimiters are specified it | | creates a single cell table. The text in | | the specified region is placed in that | | cell. | +-----------------------------------------------------------------+ By splitting the cell appropriately we now have a table consisting of paragraphs occupying its own cell. Each cell can now be edited independently. +-----------------------------------------------------------------+ |`table-capture' is a powerful command however mastering its power| |requires some practice. Here is a list of items what it can do. | +---------------------+-------------------------------------------+ |Parse Cell Items |By using column delimiter regular | | |expression and raw delimiter regular | | |expression, it parses the specified text | | |area and extracts cell items from | | |non-table text and then forms a table out | | |of them. | +---------------------+-------------------------------------------+ |Capture Text Area |When no delimiters are specified it | | |creates a single cell table. The text in | | |the specified region is placed in that | | |cell. | +---------------------+-------------------------------------------+ By applying `table-release', which does the opposite process, the contents become once again plain text. `table-release' works as companion command to `table-capture' this way. \(fn BEG END &optional COL-DELIM-REGEXP ROW-DELIM-REGEXP JUSTIFY MIN-CELL-WIDTH COLUMNS)" t nil) (autoload 'table-release "table" "\ Convert a table into plain text by removing the frame from a table. Remove the frame from a table and inactivate the table. This command converts a table into plain text without frames. It is a companion to `table-capture' which does the opposite process. \(fn)" t nil) ;;;*** ;;;### (autoloads (talk talk-connect) "talk" "talk.el" (19259 35430)) ;;; Generated autoloads from talk.el (autoload 'talk-connect "talk" "\ Connect to display DISPLAY for the Emacs talk group. \(fn DISPLAY)" t nil) (autoload 'talk "talk" "\ Connect to the Emacs talk group from the current X display or tty frame. \(fn)" t nil) ;;;*** ;;;### (autoloads (tar-mode) "tar-mode" "tar-mode.el" (19259 35430)) ;;; Generated autoloads from tar-mode.el (autoload 'tar-mode "tar-mode" "\ Major mode for viewing a tar file as a dired-like listing of its contents. You can move around using the usual cursor motion commands. Letters no longer insert themselves. Type `e' to pull a file out of the tar file and into its own buffer; or click mouse-2 on the file's line in the Tar mode buffer. Type `c' to copy an entry from the tar file into another file on disk. If you edit a sub-file of this archive (as with the `e' command) and save it with \\[save-buffer], the contents of that buffer will be saved back into the tar-file buffer; in this way you can edit a file inside of a tar archive without extracting it and re-archiving it. See also: variables `tar-update-datestamp' and `tar-anal-blocksize'. \\{tar-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (tcl-help-on-word inferior-tcl tcl-mode) "tcl" ;;;;;; "progmodes/tcl.el" (19259 35430)) ;;; Generated autoloads from progmodes/tcl.el (autoload 'tcl-mode "tcl" "\ Major mode for editing Tcl code. Expression and list commands understand all Tcl brackets. Tab indents for Tcl code. Paragraphs are separated by blank lines only. Delete converts tabs to spaces as it moves back. Variables controlling indentation style: `tcl-indent-level' Indentation of Tcl statements within surrounding block. `tcl-continued-indent-level' Indentation of continuation line relative to first line of command. Variables controlling user interaction with mode (see variable documentation for details): `tcl-tab-always-indent' Controls action of TAB key. `tcl-auto-newline' Non-nil means automatically newline before and after braces, brackets, and semicolons inserted in Tcl code. `tcl-use-smart-word-finder' If not nil, use a smarter, Tcl-specific way to find the current word when looking up help on a Tcl command. Turning on Tcl mode runs `tcl-mode-hook'. Read the documentation for `tcl-mode-hook' to see what kinds of interesting hook functions already exist. Commands: \\{tcl-mode-map} \(fn)" t nil) (autoload 'inferior-tcl "tcl" "\ Run inferior Tcl process. Prefix arg means enter program name interactively. See documentation for function `inferior-tcl-mode' for more information. \(fn CMD)" t nil) (autoload 'tcl-help-on-word "tcl" "\ Get help on Tcl command. Default is word at point. Prefix argument means invert sense of `tcl-use-smart-word-finder'. \(fn COMMAND &optional ARG)" t nil) ;;;*** ;;;### (autoloads (rsh telnet) "telnet" "net/telnet.el" (19259 35430)) ;;; Generated autoloads from net/telnet.el (add-hook 'same-window-regexps (purecopy "\\*telnet-.*\\*\\(\\|<[0-9]+>\\)")) (autoload 'telnet "telnet" "\ Open a network login connection to host named HOST (a string). Optional arg PORT specifies alternative port to connect to. Interactively, use \\[universal-argument] prefix to be prompted for port number. Communication with HOST is recorded in a buffer `*PROGRAM-HOST*' where PROGRAM is the telnet program being used. This program is controlled by the contents of the global variable `telnet-host-properties', falling back on the value of the global variable `telnet-program'. Normally input is edited in Emacs and sent a line at a time. \(fn HOST &optional PORT)" t nil) (add-hook 'same-window-regexps (purecopy "\\*rsh-[^-]*\\*\\(\\|<[0-9]*>\\)")) (autoload 'rsh "telnet" "\ Open a network login connection to host named HOST (a string). Communication with HOST is recorded in a buffer `*rsh-HOST*'. Normally input is edited in Emacs and sent a line at a time. \(fn HOST)" t nil) ;;;*** ;;;### (autoloads (serial-term ansi-term term make-term) "term" "term.el" ;;;;;; (19259 35430)) ;;; Generated autoloads from term.el (autoload 'make-term "term" "\ Make a term process NAME in a buffer, running PROGRAM. The name of the buffer is made by surrounding NAME with `*'s. If there is already a running process in that buffer, it is not restarted. Optional third arg STARTFILE is the name of a file to send the contents of to the process. Any more args are arguments to PROGRAM. \(fn NAME PROGRAM &optional STARTFILE &rest SWITCHES)" nil nil) (autoload 'term "term" "\ Start a terminal-emulator in a new buffer. The buffer is in Term mode; see `term-mode' for the commands to use in that buffer. \\<term-raw-map>Type \\[switch-to-buffer] to switch to another buffer. \(fn PROGRAM)" t nil) (autoload 'ansi-term "term" "\ Start a terminal-emulator in a new buffer. \(fn PROGRAM &optional NEW-BUFFER-NAME)" t nil) (autoload 'serial-term "term" "\ Start a terminal-emulator for a serial port in a new buffer. PORT is the path or name of the serial port. For example, this could be \"/dev/ttyS0\" on Unix. On Windows, this could be \"COM1\" or \"\\\\.\\COM10\". SPEED is the speed of the serial port in bits per second. 9600 is a common value. SPEED can be nil, see `serial-process-configure' for details. The buffer is in Term mode; see `term-mode' for the commands to use in that buffer. \\<term-raw-map>Type \\[switch-to-buffer] to switch to another buffer. \(fn PORT SPEED)" t nil) ;;;*** ;;;### (autoloads (terminal-emulator) "terminal" "terminal.el" (19259 ;;;;;; 35430)) ;;; Generated autoloads from terminal.el (autoload 'terminal-emulator "terminal" "\ Under a display-terminal emulator in BUFFER, run PROGRAM on arguments ARGS. ARGS is a list of argument-strings. Remaining arguments are WIDTH and HEIGHT. BUFFER's contents are made an image of the display generated by that program, and any input typed when BUFFER is the current Emacs buffer is sent to that program as keyboard input. Interactively, BUFFER defaults to \"*terminal*\" and PROGRAM and ARGS are parsed from an input-string using your usual shell. WIDTH and HEIGHT are determined from the size of the current window -- WIDTH will be one less than the window's width, HEIGHT will be its height. To switch buffers and leave the emulator, or to give commands to the emulator itself (as opposed to the program running under it), type Control-^. The following character is an emulator command. Type Control-^ twice to send it to the subprogram. This escape character may be changed using the variable `terminal-escape-char'. `Meta' characters may not currently be sent through the terminal emulator. Here is a list of some of the variables which control the behavior of the emulator -- see their documentation for more information: terminal-escape-char, terminal-scrolling, terminal-more-processing, terminal-redisplay-interval. This function calls the value of terminal-mode-hook if that exists and is non-nil after the terminal buffer has been set up and the subprocess started. \(fn BUFFER PROGRAM ARGS &optional WIDTH HEIGHT)" t nil) ;;;*** ;;;### (autoloads (testcover-this-defun) "testcover" "emacs-lisp/testcover.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from emacs-lisp/testcover.el (autoload 'testcover-this-defun "testcover" "\ Start coverage on function under point. \(fn)" t nil) ;;;*** ;;;### (autoloads (tetris) "tetris" "play/tetris.el" (19259 35431)) ;;; Generated autoloads from play/tetris.el (autoload 'tetris "tetris" "\ Play the Tetris game. Shapes drop from the top of the screen, and the user has to move and rotate the shape to fit in with those at the bottom of the screen so as to form complete rows. tetris-mode keybindings: \\<tetris-mode-map> \\[tetris-start-game] Starts a new game of Tetris \\[tetris-end-game] Terminates the current game \\[tetris-pause-game] Pauses (or resumes) the current game \\[tetris-move-left] Moves the shape one square to the left \\[tetris-move-right] Moves the shape one square to the right \\[tetris-rotate-prev] Rotates the shape clockwise \\[tetris-rotate-next] Rotates the shape anticlockwise \\[tetris-move-bottom] Drops the shape to the bottom of the playing area \(fn)" t nil) ;;;*** ;;;### (autoloads (doctex-mode tex-start-shell slitex-mode latex-mode ;;;;;; plain-tex-mode tex-mode tex-close-quote tex-open-quote tex-default-mode ;;;;;; tex-show-queue-command tex-dvi-view-command tex-alt-dvi-print-command ;;;;;; tex-dvi-print-command tex-bibtex-command latex-block-names ;;;;;; tex-start-commands tex-start-options slitex-run-command latex-run-command ;;;;;; tex-run-command tex-offer-save tex-main-file tex-first-line-header-regexp ;;;;;; tex-directory tex-shell-file-name) "tex-mode" "textmodes/tex-mode.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from textmodes/tex-mode.el (defvar tex-shell-file-name nil "\ *If non-nil, the shell file name to run in the subshell used to run TeX.") (custom-autoload 'tex-shell-file-name "tex-mode" t) (defvar tex-directory (purecopy ".") "\ *Directory in which temporary files are written. You can make this `/tmp' if your TEXINPUTS has no relative directories in it and you don't try to apply \\[tex-region] or \\[tex-buffer] when there are `\\input' commands with relative directories.") (custom-autoload 'tex-directory "tex-mode" t) (defvar tex-first-line-header-regexp nil "\ Regexp for matching a first line which `tex-region' should include. If this is non-nil, it should be a regular expression string; if it matches the first line of the file, `tex-region' always includes the first line in the TeX run.") (custom-autoload 'tex-first-line-header-regexp "tex-mode" t) (defvar tex-main-file nil "\ *The main TeX source file which includes this buffer's file. The command `tex-file' runs TeX on the file specified by `tex-main-file' if the variable is non-nil.") (custom-autoload 'tex-main-file "tex-mode" t) (defvar tex-offer-save t "\ *If non-nil, ask about saving modified buffers before \\[tex-file] is run.") (custom-autoload 'tex-offer-save "tex-mode" t) (defvar tex-run-command (purecopy "tex") "\ *Command used to run TeX subjob. TeX Mode sets `tex-command' to this string. See the documentation of that variable.") (custom-autoload 'tex-run-command "tex-mode" t) (defvar latex-run-command (purecopy "latex") "\ *Command used to run LaTeX subjob. LaTeX Mode sets `tex-command' to this string. See the documentation of that variable.") (custom-autoload 'latex-run-command "tex-mode" t) (defvar slitex-run-command (purecopy "slitex") "\ *Command used to run SliTeX subjob. SliTeX Mode sets `tex-command' to this string. See the documentation of that variable.") (custom-autoload 'slitex-run-command "tex-mode" t) (defvar tex-start-options (purecopy "") "\ *TeX options to use when starting TeX. These immediately precede the commands in `tex-start-commands' and the input file name, with no separating space and are not shell-quoted. If nil, TeX runs with no options. See the documentation of `tex-command'.") (custom-autoload 'tex-start-options "tex-mode" t) (defvar tex-start-commands (purecopy "\\nonstopmode\\input") "\ *TeX commands to use when starting TeX. They are shell-quoted and precede the input file name, with a separating space. If nil, no commands are used. See the documentation of `tex-command'.") (custom-autoload 'tex-start-commands "tex-mode" t) (defvar latex-block-names nil "\ *User defined LaTeX block names. Combined with `latex-standard-block-names' for minibuffer completion.") (custom-autoload 'latex-block-names "tex-mode" t) (defvar tex-bibtex-command (purecopy "bibtex") "\ *Command used by `tex-bibtex-file' to gather bibliographic data. If this string contains an asterisk (`*'), that is replaced by the file name; otherwise, the file name, preceded by blank, is added at the end.") (custom-autoload 'tex-bibtex-command "tex-mode" t) (defvar tex-dvi-print-command (purecopy "lpr -d") "\ *Command used by \\[tex-print] to print a .dvi file. If this string contains an asterisk (`*'), that is replaced by the file name; otherwise, the file name, preceded by blank, is added at the end.") (custom-autoload 'tex-dvi-print-command "tex-mode" t) (defvar tex-alt-dvi-print-command (purecopy "lpr -d") "\ *Command used by \\[tex-print] with a prefix arg to print a .dvi file. If this string contains an asterisk (`*'), that is replaced by the file name; otherwise, the file name, preceded by blank, is added at the end. If two printers are not enough of a choice, you can set the variable `tex-alt-dvi-print-command' to an expression that asks what you want; for example, (setq tex-alt-dvi-print-command '(format \"lpr -P%s\" (read-string \"Use printer: \"))) would tell \\[tex-print] with a prefix argument to ask you which printer to use.") (custom-autoload 'tex-alt-dvi-print-command "tex-mode" t) (defvar tex-dvi-view-command `(cond ((eq window-system 'x) ,(purecopy "xdvi")) ((eq window-system 'w32) ,(purecopy "yap")) (t ,(purecopy "dvi2tty * | cat -s"))) "\ *Command used by \\[tex-view] to display a `.dvi' file. If it is a string, that specifies the command directly. If this string contains an asterisk (`*'), that is replaced by the file name; otherwise, the file name, preceded by a space, is added at the end. If the value is a form, it is evaluated to get the command to use.") (custom-autoload 'tex-dvi-view-command "tex-mode" t) (defvar tex-show-queue-command (purecopy "lpq") "\ *Command used by \\[tex-show-print-queue] to show the print queue. Should show the queue(s) that \\[tex-print] puts jobs on.") (custom-autoload 'tex-show-queue-command "tex-mode" t) (defvar tex-default-mode 'latex-mode "\ *Mode to enter for a new file that might be either TeX or LaTeX. This variable is used when it can't be determined whether the file is plain TeX or LaTeX or what because the file contains no commands. Normally set to either `plain-tex-mode' or `latex-mode'.") (custom-autoload 'tex-default-mode "tex-mode" t) (defvar tex-open-quote (purecopy "``") "\ *String inserted by typing \\[tex-insert-quote] to open a quotation.") (custom-autoload 'tex-open-quote "tex-mode" t) (defvar tex-close-quote (purecopy "''") "\ *String inserted by typing \\[tex-insert-quote] to close a quotation.") (custom-autoload 'tex-close-quote "tex-mode" t) (autoload 'tex-mode "tex-mode" "\ Major mode for editing files of input for TeX, LaTeX, or SliTeX. Tries to determine (by looking at the beginning of the file) whether this file is for plain TeX, LaTeX, or SliTeX and calls `plain-tex-mode', `latex-mode', or `slitex-mode', respectively. If it cannot be determined, such as if there are no commands in the file, the value of `tex-default-mode' says which mode to use. \(fn)" t nil) (defalias 'TeX-mode 'tex-mode) (defalias 'plain-TeX-mode 'plain-tex-mode) (defalias 'LaTeX-mode 'latex-mode) (autoload 'plain-tex-mode "tex-mode" "\ Major mode for editing files of input for plain TeX. Makes $ and } display the characters they match. Makes \" insert `` when it seems to be the beginning of a quotation, and '' when it appears to be the end; it inserts \" only after a \\. Use \\[tex-region] to run TeX on the current region, plus a \"header\" copied from the top of the file (containing macro definitions, etc.), running TeX under a special subshell. \\[tex-buffer] does the whole buffer. \\[tex-file] saves the buffer and then processes the file. \\[tex-print] prints the .dvi file made by any of these. \\[tex-view] previews the .dvi file made by any of these. \\[tex-bibtex-file] runs bibtex on the file of the current buffer. Use \\[tex-validate-buffer] to check buffer for paragraphs containing mismatched $'s or braces. Special commands: \\{plain-tex-mode-map} Mode variables: tex-run-command Command string used by \\[tex-region] or \\[tex-buffer]. tex-directory Directory in which to create temporary files for TeX jobs run by \\[tex-region] or \\[tex-buffer]. tex-dvi-print-command Command string used by \\[tex-print] to print a .dvi file. tex-alt-dvi-print-command Alternative command string used by \\[tex-print] (when given a prefix argument) to print a .dvi file. tex-dvi-view-command Command string used by \\[tex-view] to preview a .dvi file. tex-show-queue-command Command string used by \\[tex-show-print-queue] to show the print queue that \\[tex-print] put your job on. Entering Plain-tex mode runs the hook `text-mode-hook', then the hook `tex-mode-hook', and finally the hook `plain-tex-mode-hook'. When the special subshell is initiated, the hook `tex-shell-hook' is run. \(fn)" t nil) (autoload 'latex-mode "tex-mode" "\ Major mode for editing files of input for LaTeX. Makes $ and } display the characters they match. Makes \" insert `` when it seems to be the beginning of a quotation, and '' when it appears to be the end; it inserts \" only after a \\. Use \\[tex-region] to run LaTeX on the current region, plus the preamble copied from the top of the file (containing \\documentstyle, etc.), running LaTeX under a special subshell. \\[tex-buffer] does the whole buffer. \\[tex-file] saves the buffer and then processes the file. \\[tex-print] prints the .dvi file made by any of these. \\[tex-view] previews the .dvi file made by any of these. \\[tex-bibtex-file] runs bibtex on the file of the current buffer. Use \\[tex-validate-buffer] to check buffer for paragraphs containing mismatched $'s or braces. Special commands: \\{latex-mode-map} Mode variables: latex-run-command Command string used by \\[tex-region] or \\[tex-buffer]. tex-directory Directory in which to create temporary files for LaTeX jobs run by \\[tex-region] or \\[tex-buffer]. tex-dvi-print-command Command string used by \\[tex-print] to print a .dvi file. tex-alt-dvi-print-command Alternative command string used by \\[tex-print] (when given a prefix argument) to print a .dvi file. tex-dvi-view-command Command string used by \\[tex-view] to preview a .dvi file. tex-show-queue-command Command string used by \\[tex-show-print-queue] to show the print queue that \\[tex-print] put your job on. Entering Latex mode runs the hook `text-mode-hook', then `tex-mode-hook', and finally `latex-mode-hook'. When the special subshell is initiated, `tex-shell-hook' is run. \(fn)" t nil) (autoload 'slitex-mode "tex-mode" "\ Major mode for editing files of input for SliTeX. Makes $ and } display the characters they match. Makes \" insert `` when it seems to be the beginning of a quotation, and '' when it appears to be the end; it inserts \" only after a \\. Use \\[tex-region] to run SliTeX on the current region, plus the preamble copied from the top of the file (containing \\documentstyle, etc.), running SliTeX under a special subshell. \\[tex-buffer] does the whole buffer. \\[tex-file] saves the buffer and then processes the file. \\[tex-print] prints the .dvi file made by any of these. \\[tex-view] previews the .dvi file made by any of these. \\[tex-bibtex-file] runs bibtex on the file of the current buffer. Use \\[tex-validate-buffer] to check buffer for paragraphs containing mismatched $'s or braces. Special commands: \\{slitex-mode-map} Mode variables: slitex-run-command Command string used by \\[tex-region] or \\[tex-buffer]. tex-directory Directory in which to create temporary files for SliTeX jobs run by \\[tex-region] or \\[tex-buffer]. tex-dvi-print-command Command string used by \\[tex-print] to print a .dvi file. tex-alt-dvi-print-command Alternative command string used by \\[tex-print] (when given a prefix argument) to print a .dvi file. tex-dvi-view-command Command string used by \\[tex-view] to preview a .dvi file. tex-show-queue-command Command string used by \\[tex-show-print-queue] to show the print queue that \\[tex-print] put your job on. Entering SliTeX mode runs the hook `text-mode-hook', then the hook `tex-mode-hook', then the hook `latex-mode-hook', and finally the hook `slitex-mode-hook'. When the special subshell is initiated, the hook `tex-shell-hook' is run. \(fn)" t nil) (autoload 'tex-start-shell "tex-mode" "\ Not documented \(fn)" nil nil) (autoload 'doctex-mode "tex-mode" "\ Major mode to edit DocTeX files. \(fn)" t nil) ;;;*** ;;;### (autoloads (texi2info texinfo-format-region texinfo-format-buffer) ;;;;;; "texinfmt" "textmodes/texinfmt.el" (19259 35431)) ;;; Generated autoloads from textmodes/texinfmt.el (autoload 'texinfo-format-buffer "texinfmt" "\ Process the current buffer as texinfo code, into an Info file. The Info file output is generated in a buffer visiting the Info file name specified in the @setfilename command. Non-nil argument (prefix, if interactive) means don't make tag table and don't split the file if large. You can use `Info-tagify' and `Info-split' to do these manually. \(fn &optional NOSPLIT)" t nil) (autoload 'texinfo-format-region "texinfmt" "\ Convert the current region of the Texinfo file to Info format. This lets you see what that part of the file will look like in Info. The command is bound to \\[texinfo-format-region]. The text that is converted to Info is stored in a temporary buffer. \(fn REGION-BEGINNING REGION-END)" t nil) (autoload 'texi2info "texinfmt" "\ Convert the current buffer (written in Texinfo code) into an Info file. The Info file output is generated in a buffer visiting the Info file names specified in the @setfilename command. This function automatically updates all node pointers and menus, and creates a master menu. This work is done on a temporary buffer that is automatically removed when the Info file is created. The original Texinfo source buffer is not changed. Non-nil argument (prefix, if interactive) means don't split the file if large. You can use `Info-split' to do this manually. \(fn &optional NOSPLIT)" t nil) ;;;*** ;;;### (autoloads (texinfo-mode texinfo-close-quote texinfo-open-quote) ;;;;;; "texinfo" "textmodes/texinfo.el" (19259 35431)) ;;; Generated autoloads from textmodes/texinfo.el (defvar texinfo-open-quote (purecopy "``") "\ String inserted by typing \\[texinfo-insert-quote] to open a quotation.") (custom-autoload 'texinfo-open-quote "texinfo" t) (defvar texinfo-close-quote (purecopy "''") "\ String inserted by typing \\[texinfo-insert-quote] to close a quotation.") (custom-autoload 'texinfo-close-quote "texinfo" t) (autoload 'texinfo-mode "texinfo" "\ Major mode for editing Texinfo files. It has these extra commands: \\{texinfo-mode-map} These are files that are used as input for TeX to make printed manuals and also to be turned into Info files with \\[makeinfo-buffer] or the `makeinfo' program. These files must be written in a very restricted and modified version of TeX input format. Editing commands are like text-mode except that the syntax table is set up so expression commands skip Texinfo bracket groups. To see what the Info version of a region of the Texinfo file will look like, use \\[makeinfo-region], which runs `makeinfo' on the current region. You can show the structure of a Texinfo file with \\[texinfo-show-structure]. This command shows the structure of a Texinfo file by listing the lines with the @-sign commands for @chapter, @section, and the like. These lines are displayed in another window called the *Occur* window. In that window, you can position the cursor over one of the lines and use \\[occur-mode-goto-occurrence], to jump to the corresponding spot in the Texinfo file. In addition, Texinfo mode provides commands that insert various frequently used @-sign commands into the buffer. You can use these commands to save keystrokes. And you can insert balanced braces with \\[texinfo-insert-braces] and later use the command \\[up-list] to move forward past the closing brace. Also, Texinfo mode provides functions for automatically creating or updating menus and node pointers. These functions * insert the `Next', `Previous' and `Up' pointers of a node, * insert or update the menu for a section, and * create a master menu for a Texinfo source file. Here are the functions: texinfo-update-node \\[texinfo-update-node] texinfo-every-node-update \\[texinfo-every-node-update] texinfo-sequential-node-update texinfo-make-menu \\[texinfo-make-menu] texinfo-all-menus-update \\[texinfo-all-menus-update] texinfo-master-menu texinfo-indent-menu-description (column &optional region-p) The `texinfo-column-for-description' variable specifies the column to which menu descriptions are indented. Passed an argument (a prefix argument, if interactive), the `texinfo-update-node' and `texinfo-make-menu' functions do their jobs in the region. To use the updating commands, you must structure your Texinfo file hierarchically, such that each `@node' line, with the exception of the Top node, is accompanied by some kind of section line, such as an `@chapter' or `@section' line. If the file has a `top' node, it must be called `top' or `Top' and be the first node in the file. Entering Texinfo mode calls the value of `text-mode-hook', and then the value of `texinfo-mode-hook'. \(fn)" t nil) ;;;*** ;;;### (autoloads (thai-composition-function thai-compose-buffer ;;;;;; thai-compose-string thai-compose-region) "thai-util" "language/thai-util.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from language/thai-util.el (autoload 'thai-compose-region "thai-util" "\ Compose Thai characters in the region. When called from a program, expects two arguments, positions (integers or markers) specifying the region. \(fn BEG END)" t nil) (autoload 'thai-compose-string "thai-util" "\ Compose Thai characters in STRING and return the resulting string. \(fn STRING)" nil nil) (autoload 'thai-compose-buffer "thai-util" "\ Compose Thai characters in the current buffer. \(fn)" t nil) (autoload 'thai-composition-function "thai-util" "\ Not documented \(fn GSTRING)" nil nil) ;;;*** ;;;### (autoloads (list-at-point number-at-point symbol-at-point ;;;;;; sexp-at-point thing-at-point bounds-of-thing-at-point forward-thing) ;;;;;; "thingatpt" "thingatpt.el" (19259 35431)) ;;; Generated autoloads from thingatpt.el (autoload 'forward-thing "thingatpt" "\ Move forward to the end of the Nth next THING. \(fn THING &optional N)" nil nil) (autoload 'bounds-of-thing-at-point "thingatpt" "\ Determine the start and end buffer locations for the THING at point. THING is a symbol which specifies the kind of syntactic entity you want. Possibilities include `symbol', `list', `sexp', `defun', `filename', `url', `email', `word', `sentence', `whitespace', `line', `page' and others. See the file `thingatpt.el' for documentation on how to define a symbol as a valid THING. The value is a cons cell (START . END) giving the start and end positions of the textual entity that was found. \(fn THING)" nil nil) (autoload 'thing-at-point "thingatpt" "\ Return the THING at point. THING is a symbol which specifies the kind of syntactic entity you want. Possibilities include `symbol', `list', `sexp', `defun', `filename', `url', `email', `word', `sentence', `whitespace', `line', `page' and others. See the file `thingatpt.el' for documentation on how to define a symbol as a valid THING. \(fn THING)" nil nil) (autoload 'sexp-at-point "thingatpt" "\ Return the sexp at point, or nil if none is found. \(fn)" nil nil) (autoload 'symbol-at-point "thingatpt" "\ Return the symbol at point, or nil if none is found. \(fn)" nil nil) (autoload 'number-at-point "thingatpt" "\ Return the number at point, or nil if none is found. \(fn)" nil nil) (autoload 'list-at-point "thingatpt" "\ Return the Lisp list at point, or nil if none is found. \(fn)" nil nil) ;;;*** ;;;### (autoloads (thumbs-dired-setroot thumbs-dired-show thumbs-dired-show-marked ;;;;;; thumbs-show-from-dir thumbs-find-thumb) "thumbs" "thumbs.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from thumbs.el (autoload 'thumbs-find-thumb "thumbs" "\ Display the thumbnail for IMG. \(fn IMG)" t nil) (autoload 'thumbs-show-from-dir "thumbs" "\ Make a preview buffer for all images in DIR. Optional argument REG to select file matching a regexp, and SAME-WINDOW to show thumbs in the same window. \(fn DIR &optional REG SAME-WINDOW)" t nil) (autoload 'thumbs-dired-show-marked "thumbs" "\ In dired, make a thumbs buffer with marked files. \(fn)" t nil) (autoload 'thumbs-dired-show "thumbs" "\ In dired, make a thumbs buffer with all files in current directory. \(fn)" t nil) (defalias 'thumbs 'thumbs-show-from-dir) (autoload 'thumbs-dired-setroot "thumbs" "\ In dired, call the setroot program on the image at point. \(fn)" t nil) ;;;*** ;;;### (autoloads (tibetan-pre-write-canonicalize-for-unicode tibetan-pre-write-conversion ;;;;;; tibetan-post-read-conversion tibetan-compose-buffer tibetan-decompose-buffer ;;;;;; tibetan-decompose-string tibetan-decompose-region tibetan-compose-region ;;;;;; tibetan-compose-string tibetan-transcription-to-tibetan tibetan-tibetan-to-transcription ;;;;;; tibetan-char-p) "tibet-util" "language/tibet-util.el" (19259 ;;;;;; 35431)) ;;; Generated autoloads from language/tibet-util.el (autoload 'tibetan-char-p "tibet-util" "\ Check if char CH is Tibetan character. Returns non-nil if CH is Tibetan. Otherwise, returns nil. \(fn CH)" nil nil) (autoload 'tibetan-tibetan-to-transcription "tibet-util" "\ Transcribe Tibetan string STR and return the corresponding Roman string. \(fn STR)" nil nil) (autoload 'tibetan-transcription-to-tibetan "tibet-util" "\ Convert Tibetan Roman string STR to Tibetan character string. The returned string has no composition information. \(fn STR)" nil nil) (autoload 'tibetan-compose-string "tibet-util" "\ Compose Tibetan string STR. \(fn STR)" nil nil) (autoload 'tibetan-compose-region "tibet-util" "\ Compose Tibetan text the region BEG and END. \(fn BEG END)" t nil) (autoload 'tibetan-decompose-region "tibet-util" "\ Decompose Tibetan text in the region FROM and TO. This is different from decompose-region because precomposed Tibetan characters are decomposed into normal Tibetan character sequences. \(fn FROM TO)" t nil) (autoload 'tibetan-decompose-string "tibet-util" "\ Decompose Tibetan string STR. This is different from decompose-string because precomposed Tibetan characters are decomposed into normal Tibetan character sequences. \(fn STR)" nil nil) (autoload 'tibetan-decompose-buffer "tibet-util" "\ Decomposes Tibetan characters in the buffer into their components. See also the documentation of the function `tibetan-decompose-region'. \(fn)" t nil) (autoload 'tibetan-compose-buffer "tibet-util" "\ Composes Tibetan character components in the buffer. See also docstring of the function tibetan-compose-region. \(fn)" t nil) (autoload 'tibetan-post-read-conversion "tibet-util" "\ Not documented \(fn LEN)" nil nil) (autoload 'tibetan-pre-write-conversion "tibet-util" "\ Not documented \(fn FROM TO)" nil nil) (autoload 'tibetan-pre-write-canonicalize-for-unicode "tibet-util" "\ Not documented \(fn FROM TO)" nil nil) ;;;*** ;;;### (autoloads (tildify-buffer tildify-region) "tildify" "textmodes/tildify.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from textmodes/tildify.el (autoload 'tildify-region "tildify" "\ Add hard spaces in the region between BEG and END. See variables `tildify-pattern-alist', `tildify-string-alist', and `tildify-ignored-environments-alist' for information about configuration parameters. This function performs no refilling of the changed text. \(fn BEG END)" t nil) (autoload 'tildify-buffer "tildify" "\ Add hard spaces in the current buffer. See variables `tildify-pattern-alist', `tildify-string-alist', and `tildify-ignored-environments-alist' for information about configuration parameters. This function performs no refilling of the changed text. \(fn)" t nil) ;;;*** ;;;### (autoloads (emacs-init-time emacs-uptime display-time-world ;;;;;; display-time-mode display-time display-time-day-and-date) ;;;;;; "time" "time.el" (19259 35431)) ;;; Generated autoloads from time.el (defvar display-time-day-and-date nil "\ *Non-nil means \\[display-time] should display day and date as well as time.") (custom-autoload 'display-time-day-and-date "time" t) (put 'display-time-string 'risky-local-variable t) (autoload 'display-time "time" "\ Enable display of time, load level, and mail flag in mode lines. This display updates automatically every minute. If `display-time-day-and-date' is non-nil, the current day and date are displayed as well. This runs the normal hook `display-time-hook' after each update. \(fn)" t nil) (defvar display-time-mode nil "\ Non-nil if Display-Time mode is enabled. See the command `display-time-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `display-time-mode'.") (custom-autoload 'display-time-mode "time" nil) (autoload 'display-time-mode "time" "\ Toggle display of time, load level, and mail flag in mode lines. With a numeric arg, enable this display if arg is positive. When this display is enabled, it updates automatically every minute. If `display-time-day-and-date' is non-nil, the current day and date are displayed as well. This runs the normal hook `display-time-hook' after each update. \(fn &optional ARG)" t nil) (autoload 'display-time-world "time" "\ Enable updating display of times in various time zones. `display-time-world-list' specifies the zones. To turn off the world time display, go to that window and type `q'. \(fn)" t nil) (autoload 'emacs-uptime "time" "\ Return a string giving the uptime of this instance of Emacs. FORMAT is a string to format the result, using `format-seconds'. For example, the Unix uptime command format is \"%D, %z%2h:%.2m\". \(fn &optional FORMAT)" t nil) (autoload 'emacs-init-time "time" "\ Return a string giving the duration of the Emacs initialization. \(fn)" t nil) ;;;*** ;;;### (autoloads (format-seconds safe-date-to-time time-to-days ;;;;;; time-to-day-in-year date-leap-year-p days-between date-to-day ;;;;;; time-add time-subtract time-since days-to-time time-less-p ;;;;;; seconds-to-time date-to-time) "time-date" "calendar/time-date.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from calendar/time-date.el (autoload 'date-to-time "time-date" "\ Parse a string DATE that represents a date-time and return a time value. \(fn DATE)" nil nil) (if (and (fboundp 'float-time) (subrp (symbol-function 'float-time))) (progn (defalias 'time-to-seconds 'float-time) (make-obsolete 'time-to-seconds 'float-time "21.1")) (autoload 'time-to-seconds "time-date")) (autoload 'seconds-to-time "time-date" "\ Convert SECONDS (a floating point number) to a time value. \(fn SECONDS)" nil nil) (autoload 'time-less-p "time-date" "\ Say whether time value T1 is less than time value T2. \(fn T1 T2)" nil nil) (autoload 'days-to-time "time-date" "\ Convert DAYS into a time value. \(fn DAYS)" nil nil) (autoload 'time-since "time-date" "\ Return the time elapsed since TIME. TIME should be either a time value or a date-time string. \(fn TIME)" nil nil) (defalias 'subtract-time 'time-subtract) (autoload 'time-subtract "time-date" "\ Subtract two time values, T1 minus T2. Return the difference in the format of a time value. \(fn T1 T2)" nil nil) (autoload 'time-add "time-date" "\ Add two time values T1 and T2. One should represent a time difference. \(fn T1 T2)" nil nil) (autoload 'date-to-day "time-date" "\ Return the number of days between year 1 and DATE. DATE should be a date-time string. \(fn DATE)" nil nil) (autoload 'days-between "time-date" "\ Return the number of days between DATE1 and DATE2. DATE1 and DATE2 should be date-time strings. \(fn DATE1 DATE2)" nil nil) (autoload 'date-leap-year-p "time-date" "\ Return t if YEAR is a leap year. \(fn YEAR)" nil nil) (autoload 'time-to-day-in-year "time-date" "\ Return the day number within the year corresponding to TIME. \(fn TIME)" nil nil) (autoload 'time-to-days "time-date" "\ The number of days between the Gregorian date 0001-12-31bce and TIME. TIME should be a time value. The Gregorian date Sunday, December 31, 1bce is imaginary. \(fn TIME)" nil nil) (autoload 'safe-date-to-time "time-date" "\ Parse a string DATE that represents a date-time and return a time value. If DATE is malformed, return a time value of zeros. \(fn DATE)" nil nil) (autoload 'format-seconds "time-date" "\ Use format control STRING to format the number SECONDS. The valid format specifiers are: %y is the number of (365-day) years. %d is the number of days. %h is the number of hours. %m is the number of minutes. %s is the number of seconds. %z is a non-printing control flag (see below). %% is a literal \"%\". Upper-case specifiers are followed by the unit-name (e.g. \"years\"). Lower-case specifiers return only the unit. \"%\" may be followed by a number specifying a width, with an optional leading \".\" for zero-padding. For example, \"%.3Y\" will return something of the form \"001 year\". The \"%z\" specifier does not print anything. When it is used, specifiers must be given in order of decreasing size. To the left of \"%z\", nothing is output until the first non-zero unit is encountered. This function does not work for SECONDS greater than `most-positive-fixnum'. \(fn STRING SECONDS)" nil nil) ;;;*** ;;;### (autoloads (time-stamp-toggle-active time-stamp) "time-stamp" ;;;;;; "time-stamp.el" (19259 35431)) ;;; Generated autoloads from time-stamp.el (put 'time-stamp-format 'safe-local-variable 'stringp) (put 'time-stamp-time-zone 'safe-local-variable 'string-or-null-p) (put 'time-stamp-line-limit 'safe-local-variable 'integerp) (put 'time-stamp-start 'safe-local-variable 'stringp) (put 'time-stamp-end 'safe-local-variable 'stringp) (put 'time-stamp-inserts-lines 'safe-local-variable 'symbolp) (put 'time-stamp-count 'safe-local-variable 'integerp) (put 'time-stamp-pattern 'safe-local-variable 'stringp) (autoload 'time-stamp "time-stamp" "\ Update the time stamp string(s) in the buffer. A template in a file can be automatically updated with a new time stamp every time you save the file. Add this line to your .emacs file: (add-hook 'before-save-hook 'time-stamp) or customize `before-save-hook' through Custom. Normally the template must appear in the first 8 lines of a file and look like one of the following: Time-stamp: <> Time-stamp: \" \" The time stamp is written between the brackets or quotes: Time-stamp: <2001-02-18 10:20:51 gildea> The time stamp is updated only if the variable `time-stamp-active' is non-nil. The format of the time stamp is set by the variable `time-stamp-pattern' or `time-stamp-format'. The variables `time-stamp-pattern', `time-stamp-line-limit', `time-stamp-start', `time-stamp-end', `time-stamp-count', and `time-stamp-inserts-lines' control finding the template. \(fn)" t nil) (autoload 'time-stamp-toggle-active "time-stamp" "\ Toggle `time-stamp-active', setting whether \\[time-stamp] updates a buffer. With ARG, turn time stamping on if and only if arg is positive. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (timeclock-when-to-leave-string timeclock-workday-elapsed-string ;;;;;; timeclock-workday-remaining-string timeclock-reread-log timeclock-query-out ;;;;;; timeclock-change timeclock-status-string timeclock-out timeclock-in ;;;;;; timeclock-modeline-display) "timeclock" "calendar/timeclock.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from calendar/timeclock.el (autoload 'timeclock-modeline-display "timeclock" "\ Toggle display of the amount of time left today in the modeline. If `timeclock-use-display-time' is non-nil (the default), then the function `display-time-mode' must be active, and the modeline will be updated whenever the time display is updated. Otherwise, the timeclock will use its own sixty second timer to do its updating. With prefix ARG, turn modeline display on if and only if ARG is positive. Returns the new status of timeclock modeline display (non-nil means on). \(fn &optional ARG)" t nil) (autoload 'timeclock-in "timeclock" "\ Clock in, recording the current time moment in the timelog. With a numeric prefix ARG, record the fact that today has only that many hours in it to be worked. If ARG is a non-numeric prefix argument \(non-nil, but not a number), 0 is assumed (working on a holiday or weekend). *If not called interactively, ARG should be the number of _seconds_ worked today*. This feature only has effect the first time this function is called within a day. PROJECT is the project being clocked into. If PROJECT is nil, and FIND-PROJECT is non-nil -- or the user calls `timeclock-in' interactively -- call the function `timeclock-get-project-function' to discover the name of the project. \(fn &optional ARG PROJECT FIND-PROJECT)" t nil) (autoload 'timeclock-out "timeclock" "\ Clock out, recording the current time moment in the timelog. If a prefix ARG is given, the user has completed the project that was begun during the last time segment. REASON is the user's reason for clocking out. If REASON is nil, and FIND-REASON is non-nil -- or the user calls `timeclock-out' interactively -- call the function `timeclock-get-reason-function' to discover the reason. \(fn &optional ARG REASON FIND-REASON)" t nil) (autoload 'timeclock-status-string "timeclock" "\ Report the overall timeclock status at the present moment. If SHOW-SECONDS is non-nil, display second resolution. If TODAY-ONLY is non-nil, the display will be relative only to time worked today, ignoring the time worked on previous days. \(fn &optional SHOW-SECONDS TODAY-ONLY)" t nil) (autoload 'timeclock-change "timeclock" "\ Change to working on a different project. This clocks out of the current project, then clocks in on a new one. With a prefix ARG, consider the previous project as finished at the time of changeover. PROJECT is the name of the last project you were working on. \(fn &optional ARG PROJECT)" t nil) (autoload 'timeclock-query-out "timeclock" "\ Ask the user whether to clock out. This is a useful function for adding to `kill-emacs-query-functions'. \(fn)" nil nil) (autoload 'timeclock-reread-log "timeclock" "\ Re-read the timeclock, to account for external changes. Returns the new value of `timeclock-discrepancy'. \(fn)" t nil) (autoload 'timeclock-workday-remaining-string "timeclock" "\ Return a string representing the amount of time left today. Display second resolution if SHOW-SECONDS is non-nil. If TODAY-ONLY is non-nil, the display will be relative only to time worked today. See `timeclock-relative' for more information about the meaning of \"relative to today\". \(fn &optional SHOW-SECONDS TODAY-ONLY)" t nil) (autoload 'timeclock-workday-elapsed-string "timeclock" "\ Return a string representing the amount of time worked today. Display seconds resolution if SHOW-SECONDS is non-nil. If RELATIVE is non-nil, the amount returned will be relative to past time worked. \(fn &optional SHOW-SECONDS)" t nil) (autoload 'timeclock-when-to-leave-string "timeclock" "\ Return a string representing the end of today's workday. This string is relative to the value of `timeclock-workday'. If SHOW-SECONDS is non-nil, the value printed/returned will include seconds. If TODAY-ONLY is non-nil, the value returned will be relative only to the time worked today, and not to past time. \(fn &optional SHOW-SECONDS TODAY-ONLY)" t nil) ;;;*** ;;;### (autoloads (batch-titdic-convert titdic-convert) "titdic-cnv" ;;;;;; "international/titdic-cnv.el" (19259 35431)) ;;; Generated autoloads from international/titdic-cnv.el (autoload 'titdic-convert "titdic-cnv" "\ Convert a TIT dictionary of FILENAME into a Quail package. Optional argument DIRNAME if specified is the directory name under which the generated Quail package is saved. \(fn FILENAME &optional DIRNAME)" t nil) (autoload 'batch-titdic-convert "titdic-cnv" "\ Run `titdic-convert' on the files remaining on the command line. Use this from the command line, with `-batch'; it won't work in an interactive Emacs. For example, invoke \"emacs -batch -f batch-titdic-convert XXX.tit\" to generate Quail package file \"xxx.el\" from TIT dictionary file \"XXX.tit\". To get complete usage, invoke \"emacs -batch -f batch-titdic-convert -h\". \(fn &optional FORCE)" nil nil) ;;;*** ;;;### (autoloads (tmm-prompt tmm-menubar-mouse tmm-menubar) "tmm" ;;;;;; "tmm.el" (19259 35431)) ;;; Generated autoloads from tmm.el (define-key global-map "\M-`" 'tmm-menubar) (define-key global-map [menu-bar mouse-1] 'tmm-menubar-mouse) (autoload 'tmm-menubar "tmm" "\ Text-mode emulation of looking and choosing from a menubar. See the documentation for `tmm-prompt'. X-POSITION, if non-nil, specifies a horizontal position within the menu bar; we make that menu bar item (the one at that position) the default choice. \(fn &optional X-POSITION)" t nil) (autoload 'tmm-menubar-mouse "tmm" "\ Text-mode emulation of looking and choosing from a menubar. This command is used when you click the mouse in the menubar on a console which has no window system but does have a mouse. See the documentation for `tmm-prompt'. \(fn EVENT)" t nil) (autoload 'tmm-prompt "tmm" "\ Text-mode emulation of calling the bindings in keymap. Creates a text-mode menu of possible choices. You can access the elements in the menu in two ways: *) via history mechanism from minibuffer; *) Or via completion-buffer that is automatically shown. The last alternative is currently a hack, you cannot use mouse reliably. MENU is like the MENU argument to `x-popup-menu': either a keymap or an alist of alists. DEFAULT-ITEM, if non-nil, specifies an initial default choice. Its value should be an event that has a binding in MENU. \(fn MENU &optional IN-POPUP DEFAULT-ITEM)" nil nil) ;;;*** ;;;### (autoloads (todo-show todo-cp todo-mode todo-print todo-top-priorities ;;;;;; todo-insert-item todo-add-item-non-interactively todo-add-category) ;;;;;; "todo-mode" "calendar/todo-mode.el" (19259 35431)) ;;; Generated autoloads from calendar/todo-mode.el (autoload 'todo-add-category "todo-mode" "\ Add new category CAT to the TODO list. \(fn &optional CAT)" t nil) (autoload 'todo-add-item-non-interactively "todo-mode" "\ Insert NEW-ITEM in TODO list as a new entry in CATEGORY. \(fn NEW-ITEM CATEGORY)" nil nil) (autoload 'todo-insert-item "todo-mode" "\ Insert new TODO list entry. With a prefix argument ARG solicit the category, otherwise use the current category. \(fn ARG)" t nil) (autoload 'todo-top-priorities "todo-mode" "\ List top priorities for each category. Number of entries for each category is given by NOF-PRIORITIES which defaults to `todo-show-priorities'. If CATEGORY-PR-PAGE is non-nil, a page separator '^L' is inserted between each category. INTERACTIVE should be non-nil if this function is called interactively. \(fn &optional NOF-PRIORITIES CATEGORY-PR-PAGE INTERACTIVE)" t nil) (autoload 'todo-print "todo-mode" "\ Print todo summary using `todo-print-function'. If CATEGORY-PR-PAGE is non-nil, a page separator `^L' is inserted between each category. Number of entries for each category is given by `todo-print-priorities'. \(fn &optional CATEGORY-PR-PAGE)" t nil) (autoload 'todo-mode "todo-mode" "\ Major mode for editing TODO lists. \\{todo-mode-map} \(fn)" t nil) (autoload 'todo-cp "todo-mode" "\ Make a diary entry appear only in the current date's diary. \(fn)" nil nil) (autoload 'todo-show "todo-mode" "\ Show TODO list. \(fn)" t nil) ;;;*** ;;;### (autoloads (tool-bar-local-item-from-menu tool-bar-add-item-from-menu ;;;;;; tool-bar-local-item tool-bar-add-item toggle-tool-bar-mode-from-frame) ;;;;;; "tool-bar" "tool-bar.el" (19259 35431)) ;;; Generated autoloads from tool-bar.el (autoload 'toggle-tool-bar-mode-from-frame "tool-bar" "\ Toggle tool bar on or off, based on the status of the current frame. See `tool-bar-mode' for more information. \(fn &optional ARG)" t nil) (put 'tool-bar-mode 'standard-value '(t)) (autoload 'tool-bar-add-item "tool-bar" "\ Add an item to the tool bar. ICON names the image, DEF is the key definition and KEY is a symbol for the fake function key in the menu keymap. Remaining arguments PROPS are additional items to add to the menu item specification. See Info node `(elisp)Tool Bar'. Items are added from left to right. ICON is the base name of a file containing the image to use. The function will first try to use low-color/ICON.xpm if `display-color-cells' is less or equal to 256, then ICON.xpm, then ICON.pbm, and finally ICON.xbm, using `find-image'. Use this function only to make bindings in the global value of `tool-bar-map'. To define items in any other map, use `tool-bar-local-item'. \(fn ICON DEF KEY &rest PROPS)" nil nil) (autoload 'tool-bar-local-item "tool-bar" "\ Add an item to the tool bar in map MAP. ICON names the image, DEF is the key definition and KEY is a symbol for the fake function key in the menu keymap. Remaining arguments PROPS are additional items to add to the menu item specification. See Info node `(elisp)Tool Bar'. Items are added from left to right. ICON is the base name of a file containing the image to use. The function will first try to use low-color/ICON.xpm if `display-color-cells' is less or equal to 256, then ICON.xpm, then ICON.pbm, and finally ICON.xbm, using `find-image'. \(fn ICON DEF KEY MAP &rest PROPS)" nil nil) (autoload 'tool-bar-add-item-from-menu "tool-bar" "\ Define tool bar binding for COMMAND in keymap MAP using the given ICON. This makes a binding for COMMAND in `tool-bar-map', copying its binding from the menu bar in MAP (which defaults to `global-map'), but modifies the binding by adding an image specification for ICON. It finds ICON just like `tool-bar-add-item'. PROPS are additional properties to add to the binding. MAP must contain appropriate binding for `[menu-bar]' which holds a keymap. Use this function only to make bindings in the global value of `tool-bar-map'. To define items in any other map, use `tool-bar-local-item-from-menu'. \(fn COMMAND ICON &optional MAP &rest PROPS)" nil nil) (autoload 'tool-bar-local-item-from-menu "tool-bar" "\ Define local tool bar binding for COMMAND using the given ICON. This makes a binding for COMMAND in IN-MAP, copying its binding from the menu bar in FROM-MAP (which defaults to `global-map'), but modifies the binding by adding an image specification for ICON. It finds ICON just like `tool-bar-add-item'. PROPS are additional properties to add to the binding. FROM-MAP must contain appropriate binding for `[menu-bar]' which holds a keymap. \(fn COMMAND ICON IN-MAP &optional FROM-MAP &rest PROPS)" nil nil) ;;;*** ;;;### (autoloads (tpu-edt-on tpu-edt-mode) "tpu-edt" "emulation/tpu-edt.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from emulation/tpu-edt.el (defvar tpu-edt-mode nil "\ Non-nil if Tpu-Edt mode is enabled. See the command `tpu-edt-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `tpu-edt-mode'.") (custom-autoload 'tpu-edt-mode "tpu-edt" nil) (autoload 'tpu-edt-mode "tpu-edt" "\ TPU/edt emulation. \(fn &optional ARG)" t nil) (defalias 'tpu-edt 'tpu-edt-on) (autoload 'tpu-edt-on "tpu-edt" "\ Turn on TPU/edt emulation. \(fn)" t nil) ;;;*** ;;;### (autoloads (tpu-mapper) "tpu-mapper" "emulation/tpu-mapper.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from emulation/tpu-mapper.el (autoload 'tpu-mapper "tpu-mapper" "\ Create an Emacs lisp file defining the TPU-edt keypad for X-windows. This command displays an instruction screen showing the TPU-edt keypad and asks you to press the TPU-edt editing keys. It uses the keys you press to create an Emacs Lisp file that will define a TPU-edt keypad for your X server. You can even re-arrange the standard EDT keypad to suit your tastes (or to cope with those silly Sun and PC keypads). Finally, you will be prompted for the name of the file to store the key definitions. If you chose the default, TPU-edt will find it and load it automatically. If you specify a different file name, you will need to set the variable ``tpu-xkeys-file'' before starting TPU-edt. Here's how you might go about doing that in your .emacs file. (setq tpu-xkeys-file (expand-file-name \"~/.my-emacs-x-keys\")) (tpu-edt) Known Problems: Sometimes, tpu-mapper will ignore a key you press, and just continue to prompt for the same key. This can happen when your window manager sucks up the key and doesn't pass it on to Emacs, or it could be an Emacs bug. Either way, there's nothing that tpu-mapper can do about it. You must press RETURN, to skip the current key and continue. Later, you and/or your local X guru can try to figure out why the key is being ignored. \(fn)" t nil) ;;;*** ;;;### (autoloads (tq-create) "tq" "emacs-lisp/tq.el" (19259 35431)) ;;; Generated autoloads from emacs-lisp/tq.el (autoload 'tq-create "tq" "\ Create and return a transaction queue communicating with PROCESS. PROCESS should be a subprocess capable of sending and receiving streams of bytes. It may be a local process, or it may be connected to a tcp server on another machine. \(fn PROCESS)" nil nil) ;;;*** ;;;### (autoloads (trace-function-background trace-function trace-buffer) ;;;;;; "trace" "emacs-lisp/trace.el" (19259 35431)) ;;; Generated autoloads from emacs-lisp/trace.el (defvar trace-buffer (purecopy "*trace-output*") "\ Trace output will by default go to that buffer.") (custom-autoload 'trace-buffer "trace" t) (autoload 'trace-function "trace" "\ Traces FUNCTION with trace output going to BUFFER. For every call of FUNCTION Lisp-style trace messages that display argument and return values will be inserted into BUFFER. This function generates the trace advice for FUNCTION and activates it together with any other advice there might be!! The trace BUFFER will popup whenever FUNCTION is called. Do not use this to trace functions that switch buffers or do any other display oriented stuff, use `trace-function-background' instead. \(fn FUNCTION &optional BUFFER)" t nil) (autoload 'trace-function-background "trace" "\ Traces FUNCTION with trace output going quietly to BUFFER. When this tracing is enabled, every call to FUNCTION writes a Lisp-style trace message (showing the arguments and return value) into BUFFER. This function generates advice to trace FUNCTION and activates it together with any other advice there might be. The trace output goes to BUFFER quietly, without changing the window or buffer configuration. BUFFER defaults to `trace-buffer'. \(fn FUNCTION &optional BUFFER)" t nil) ;;;*** ;;;### (autoloads (tramp-unload-tramp tramp-completion-handle-file-name-completion ;;;;;; tramp-completion-handle-file-name-all-completions tramp-unload-file-name-handlers ;;;;;; tramp-file-name-handler tramp-syntax tramp-mode) "tramp" ;;;;;; "net/tramp.el" (19259 35431)) ;;; Generated autoloads from net/tramp.el (defvar tramp-mode t "\ *Whether Tramp is enabled. If it is set to nil, all remote file names are used literally.") (custom-autoload 'tramp-mode "tramp" t) (defvar tramp-syntax (if (featurep 'xemacs) 'sep 'ftp) "\ Tramp filename syntax to be used. It can have the following values: 'ftp -- Ange-FTP respective EFS like syntax (GNU Emacs default) 'sep -- Syntax as defined for XEmacs (not available yet for GNU Emacs) 'url -- URL-like syntax.") (custom-autoload 'tramp-syntax "tramp" t) (defconst tramp-file-name-regexp-unified "\\`/\\([^[/:]+\\|[^/]+]\\):" "\ Value for `tramp-file-name-regexp' for unified remoting. Emacs (not XEmacs) uses a unified filename syntax for Ange-FTP and Tramp. See `tramp-file-name-structure' for more explanations.") (defconst tramp-file-name-regexp-separate "\\`/\\[.*\\]" "\ Value for `tramp-file-name-regexp' for separate remoting. XEmacs uses a separate filename syntax for Tramp and EFS. See `tramp-file-name-structure' for more explanations.") (defconst tramp-file-name-regexp-url "\\`/[^/:]+://" "\ Value for `tramp-file-name-regexp' for URL-like remoting. See `tramp-file-name-structure' for more explanations.") (defconst tramp-file-name-regexp (cond ((equal tramp-syntax 'ftp) tramp-file-name-regexp-unified) ((equal tramp-syntax 'sep) tramp-file-name-regexp-separate) ((equal tramp-syntax 'url) tramp-file-name-regexp-url) (t (error "Wrong `tramp-syntax' defined"))) "\ *Regular expression matching file names handled by Tramp. This regexp should match Tramp file names but no other file names. \(When tramp.el is loaded, this regular expression is prepended to `file-name-handler-alist', and that is searched sequentially. Thus, if the Tramp entry appears rather early in the `file-name-handler-alist' and is a bit too general, then some files might be considered Tramp files which are not really Tramp files. Please note that the entry in `file-name-handler-alist' is made when this file (tramp.el) is loaded. This means that this variable must be set before loading tramp.el. Alternatively, `file-name-handler-alist' can be updated after changing this variable. Also see `tramp-file-name-structure'.") (defconst tramp-root-regexp (if (memq system-type '(cygwin windows-nt)) "\\`\\([a-zA-Z]:\\)?/" "\\`/") "\ Beginning of an incomplete Tramp file name. Usually, it is just \"\\\\`/\". On W32 systems, there might be a volume letter, which will be removed by `tramp-drop-volume-letter'.") (defconst tramp-completion-file-name-regexp-unified (concat tramp-root-regexp "[^/]*\\'") "\ Value for `tramp-completion-file-name-regexp' for unified remoting. GNU Emacs uses a unified filename syntax for Tramp and Ange-FTP. See `tramp-file-name-structure' for more explanations.") (defconst tramp-completion-file-name-regexp-separate (concat tramp-root-regexp "\\([[][^]]*\\)?\\'") "\ Value for `tramp-completion-file-name-regexp' for separate remoting. XEmacs uses a separate filename syntax for Tramp and EFS. See `tramp-file-name-structure' for more explanations.") (defconst tramp-completion-file-name-regexp-url (concat tramp-root-regexp "[^/:]+\\(:\\(/\\(/[^/]*\\)?\\)?\\)?\\'") "\ Value for `tramp-completion-file-name-regexp' for URL-like remoting. See `tramp-file-name-structure' for more explanations.") (defconst tramp-completion-file-name-regexp (cond ((equal tramp-syntax 'ftp) tramp-completion-file-name-regexp-unified) ((equal tramp-syntax 'sep) tramp-completion-file-name-regexp-separate) ((equal tramp-syntax 'url) tramp-completion-file-name-regexp-url) (t (error "Wrong `tramp-syntax' defined"))) "\ *Regular expression matching file names handled by Tramp completion. This regexp should match partial Tramp file names only. Please note that the entry in `file-name-handler-alist' is made when this file (tramp.el) is loaded. This means that this variable must be set before loading tramp.el. Alternatively, `file-name-handler-alist' can be updated after changing this variable. Also see `tramp-file-name-structure'.") (defconst tramp-completion-file-name-handler-alist '((file-name-all-completions . tramp-completion-handle-file-name-all-completions) (file-name-completion . tramp-completion-handle-file-name-completion)) "\ Alist of completion handler functions. Used for file names matching `tramp-file-name-regexp'. Operations not mentioned here will be handled by `tramp-file-name-handler-alist' or the normal Emacs functions.") (defun tramp-run-real-handler (operation args) "\ Invoke normal file name handler for OPERATION. First arg specifies the OPERATION, second arg is a list of arguments to pass to the OPERATION." (let* ((inhibit-file-name-handlers (\` (tramp-file-name-handler tramp-vc-file-name-handler tramp-completion-file-name-handler cygwin-mount-name-hook-function cygwin-mount-map-drive-hook-function \, (and (eq inhibit-file-name-operation operation) inhibit-file-name-handlers)))) (inhibit-file-name-operation operation)) (apply operation args))) (defun tramp-completion-run-real-handler (operation args) "\ Invoke `tramp-file-name-handler' for OPERATION. First arg specifies the OPERATION, second arg is a list of arguments to pass to the OPERATION." (let* ((inhibit-file-name-handlers (\` (tramp-completion-file-name-handler cygwin-mount-name-hook-function cygwin-mount-map-drive-hook-function \, (and (eq inhibit-file-name-operation operation) inhibit-file-name-handlers)))) (inhibit-file-name-operation operation)) (apply operation args))) (autoload 'tramp-file-name-handler "tramp" "\ Invoke Tramp file name handler. Falls back to normal file name handler if no Tramp file name handler exists. \(fn OPERATION &rest ARGS)" nil nil) (defun tramp-completion-file-name-handler (operation &rest args) "\ Invoke Tramp file name completion handler. Falls back to normal file name handler if no Tramp file name handler exists." (let ((directory-sep-char 47) (fn (assoc operation tramp-completion-file-name-handler-alist))) (if (and fn tramp-mode (or (eq tramp-syntax (quote sep)) (featurep (quote tramp)) (and (boundp (quote partial-completion-mode)) partial-completion-mode) (featurep (quote ido)) (featurep (quote icicles)))) (save-match-data (apply (cdr fn) args)) (tramp-completion-run-real-handler operation args)))) (defun tramp-register-file-name-handlers nil "\ Add Tramp file name handlers to `file-name-handler-alist'." (let ((a1 (rassq (quote tramp-file-name-handler) file-name-handler-alist))) (setq file-name-handler-alist (delq a1 file-name-handler-alist))) (let ((a1 (rassq (quote tramp-completion-file-name-handler) file-name-handler-alist))) (setq file-name-handler-alist (delq a1 file-name-handler-alist))) (add-to-list (quote file-name-handler-alist) (cons tramp-file-name-regexp (quote tramp-file-name-handler))) (add-to-list (quote file-name-handler-alist) (cons tramp-completion-file-name-regexp (quote tramp-completion-file-name-handler))) (put (quote tramp-completion-file-name-handler) (quote safe-magic) t) (dolist (fnh (quote (epa-file-handler jka-compr-handler))) (let ((entry (rassoc fnh file-name-handler-alist))) (when entry (setq file-name-handler-alist (cons entry (delete entry file-name-handler-alist))))))) (tramp-register-file-name-handlers) (autoload 'tramp-unload-file-name-handlers "tramp" "\ Not documented \(fn)" nil nil) (autoload 'tramp-completion-handle-file-name-all-completions "tramp" "\ Like `file-name-all-completions' for partial Tramp files. \(fn FILENAME DIRECTORY)" nil nil) (autoload 'tramp-completion-handle-file-name-completion "tramp" "\ Like `file-name-completion' for Tramp files. \(fn FILENAME DIRECTORY &optional PREDICATE)" nil nil) (autoload 'tramp-unload-tramp "tramp" "\ Discard Tramp from loading remote files. \(fn)" t nil) ;;;*** ;;;### (autoloads (tramp-ftp-enable-ange-ftp) "tramp-ftp" "net/tramp-ftp.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from net/tramp-ftp.el (autoload 'tramp-ftp-enable-ange-ftp "tramp-ftp" "\ Not documented \(fn)" nil nil) ;;;*** ;;;### (autoloads (help-with-tutorial) "tutorial" "tutorial.el" (19259 ;;;;;; 35431)) ;;; Generated autoloads from tutorial.el (autoload 'help-with-tutorial "tutorial" "\ Select the Emacs learn-by-doing tutorial. If there is a tutorial version written in the language of the selected language environment, that version is used. If there's no tutorial in that language, `TUTORIAL' is selected. With ARG, you are asked to choose which language. If DONT-ASK-FOR-REVERT is non-nil the buffer is reverted without any question when restarting the tutorial. If any of the standard Emacs key bindings that are used in the tutorial have been changed then an explanatory note about this is shown in the beginning of the tutorial buffer. When the tutorial buffer is killed the content and the point position in the buffer is saved so that the tutorial may be resumed later. \(fn &optional ARG DONT-ASK-FOR-REVERT)" t nil) ;;;*** ;;;### (autoloads (tai-viet-composition-function) "tv-util" "language/tv-util.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from language/tv-util.el (autoload 'tai-viet-composition-function "tv-util" "\ Not documented \(fn FROM TO FONT-OBJECT STRING)" nil nil) ;;;*** ;;;### (autoloads (2C-split 2C-associate-buffer 2C-two-columns) "two-column" ;;;;;; "textmodes/two-column.el" (19259 35431)) ;;; Generated autoloads from textmodes/two-column.el (autoload '2C-command "two-column" () t 'keymap) (global-set-key "\C-x6" '2C-command) (global-set-key [f2] '2C-command) (autoload '2C-two-columns "two-column" "\ Split current window vertically for two-column editing. \\<global-map>When called the first time, associates a buffer with the current buffer in two-column minor mode (use \\[describe-mode] once in the mode, for details.). It runs `2C-other-buffer-hook' in the new buffer. When called again, restores the screen layout with the current buffer first and the associated buffer to its right. \(fn &optional BUFFER)" t nil) (autoload '2C-associate-buffer "two-column" "\ Associate another buffer with this one in two-column minor mode. Can also be used to associate a just previously visited file, by accepting the proposed default buffer. \(See \\[describe-mode] .) \(fn)" t nil) (autoload '2C-split "two-column" "\ Split a two-column text at point, into two buffers in two-column minor mode. Point becomes the local value of `2C-window-width'. Only lines that have the ARG same preceding characters at that column get split. The ARG preceding characters without any leading whitespace become the local value for `2C-separator'. This way lines that continue across both columns remain untouched in the first buffer. This function can be used with a prototype line, to set up things. You write the first line of each column and then split that line. E.g.: First column's text sSs Second column's text \\___/\\ / \\ 5 character Separator You type M-5 \\[2C-split] with the point here. \(See \\[describe-mode] .) \(fn ARG)" t nil) ;;;*** ;;;### (autoloads (type-break-guesstimate-keystroke-threshold type-break-statistics ;;;;;; type-break type-break-mode type-break-keystroke-threshold ;;;;;; type-break-good-break-interval type-break-good-rest-interval ;;;;;; type-break-interval type-break-mode) "type-break" "type-break.el" ;;;;;; (19259 35431)) ;;; Generated autoloads from type-break.el (defvar type-break-mode nil "\ Toggle typing break mode. See the docstring for the `type-break-mode' command for more information. Setting this variable directly does not take effect; use either \\[customize] or the function `type-break-mode'.") (custom-autoload 'type-break-mode "type-break" nil) (defvar type-break-interval (* 60 60) "\ Number of seconds between scheduled typing breaks.") (custom-autoload 'type-break-interval "type-break" t) (defvar type-break-good-rest-interval (/ type-break-interval 6) "\ Number of seconds of idle time considered to be an adequate typing rest. When this variable is non-nil, Emacs checks the idle time between keystrokes. If this idle time is long enough to be considered a \"good\" rest from typing, then the next typing break is simply rescheduled for later. If a break is interrupted before this much time elapses, the user will be asked whether or not really to interrupt the break.") (custom-autoload 'type-break-good-rest-interval "type-break" t) (defvar type-break-good-break-interval nil "\ Number of seconds considered to be an adequate explicit typing rest. When this variable is non-nil, its value is considered to be a \"good\" length (in seconds) for a break initiated by the command `type-break', overriding `type-break-good-rest-interval'. This provides querying of break interruptions when `type-break-good-rest-interval' is nil.") (custom-autoload 'type-break-good-break-interval "type-break" t) (defvar type-break-keystroke-threshold (let* ((wpm 35) (avg-word-length 5) (upper (* wpm avg-word-length (/ type-break-interval 60))) (lower (/ upper 5))) (cons lower upper)) "\ Upper and lower bound on number of keystrokes for considering typing break. This structure is a pair of numbers (MIN . MAX). The first number is the minimum number of keystrokes that must have been entered since the last typing break before considering another one, even if the scheduled time has elapsed; the break is simply rescheduled until later if the minimum threshold hasn't been reached. If this first value is nil, then there is no minimum threshold; as soon as the scheduled time has elapsed, the user will always be queried. The second number is the maximum number of keystrokes that can be entered before a typing break is requested immediately, pre-empting the originally scheduled break. If this second value is nil, then no pre-emptive breaks will occur; only scheduled ones will. Keys with bucky bits (shift, control, meta, etc) are counted as only one keystroke even though they really require multiple keys to generate them. The command `type-break-guesstimate-keystroke-threshold' can be used to guess a reasonably good pair of values for this variable.") (custom-autoload 'type-break-keystroke-threshold "type-break" t) (autoload 'type-break-mode "type-break" "\ Enable or disable typing-break mode. This is a minor mode, but it is global to all buffers by default. When this mode is enabled, the user is encouraged to take typing breaks at appropriate intervals; either after a specified amount of time or when the user has exceeded a keystroke threshold. When the time arrives, the user is asked to take a break. If the user refuses at that time, Emacs will ask again in a short period of time. The idea is to give the user enough time to find a good breaking point in his or her work, but be sufficiently annoying to discourage putting typing breaks off indefinitely. A negative prefix argument disables this mode. No argument or any non-negative argument enables it. The user may enable or disable this mode by setting the variable of the same name, though setting it in that way doesn't reschedule a break or reset the keystroke counter. If the mode was previously disabled and is enabled as a consequence of calling this function, it schedules a break with `type-break-schedule' to make sure one occurs (the user can call that command to reschedule the break at any time). It also initializes the keystroke counter. The variable `type-break-interval' specifies the number of seconds to schedule between regular typing breaks. This variable doesn't directly affect the time schedule; it simply provides a default for the `type-break-schedule' command. If set, the variable `type-break-good-rest-interval' specifies the minimum amount of time which is considered a reasonable typing break. Whenever that time has elapsed, typing breaks are automatically rescheduled for later even if Emacs didn't prompt you to take one first. Also, if a break is ended before this much time has elapsed, the user will be asked whether or not to continue. A nil value for this variable prevents automatic break rescheduling, making `type-break-interval' an upper bound on the time between breaks. In this case breaks will be prompted for as usual before the upper bound if the keystroke threshold is reached. If `type-break-good-rest-interval' is nil and `type-break-good-break-interval' is set, then confirmation is required to interrupt a break before `type-break-good-break-interval' seconds have passed. This provides for an upper bound on the time between breaks together with confirmation of interruptions to these breaks. The variable `type-break-keystroke-threshold' is used to determine the thresholds at which typing breaks should be considered. You can use the command `type-break-guesstimate-keystroke-threshold' to try to approximate good values for this. There are several variables that affect how or when warning messages about imminent typing breaks are displayed. They include: `type-break-mode-line-message-mode' `type-break-time-warning-intervals' `type-break-keystroke-warning-intervals' `type-break-warning-repeat' `type-break-warning-countdown-string' `type-break-warning-countdown-string-type' There are several variables that affect if, how, and when queries to begin a typing break occur. They include: `type-break-query-mode' `type-break-query-function' `type-break-query-interval' The command `type-break-statistics' prints interesting things. Finally, a file (named `type-break-file-name') is used to store information across Emacs sessions. This provides recovery of the break status between sessions and after a crash. Manual changes to the file may result in problems. \(fn &optional PREFIX)" t nil) (autoload 'type-break "type-break" "\ Take a typing break. During the break, a demo selected from the functions listed in `type-break-demo-functions' is run. After the typing break is finished, the next break is scheduled as per the function `type-break-schedule'. \(fn)" t nil) (autoload 'type-break-statistics "type-break" "\ Print statistics about typing breaks in a temporary buffer. This includes the last time a typing break was taken, when the next one is scheduled, the keystroke thresholds and the current keystroke count, etc. \(fn)" t nil) (autoload 'type-break-guesstimate-keystroke-threshold "type-break" "\ Guess values for the minimum/maximum keystroke threshold for typing breaks. If called interactively, the user is prompted for their guess as to how many words per minute they usually type. This value should not be your maximum WPM, but your average. Of course, this is harder to gauge since it can vary considerably depending on what you are doing. For example, one tends to type less when debugging a program as opposed to writing documentation. (Perhaps a separate program should be written to estimate average typing speed.) From that, this command sets the values in `type-break-keystroke-threshold' based on a fairly simple algorithm involving assumptions about the average length of words (5). For the minimum threshold, it uses about a fifth of the computed maximum threshold. When called from Lisp programs, the optional args WORDLEN and FRAC can be used to override the default assumption about average word length and the fraction of the maximum threshold to which to set the minimum threshold. FRAC should be the inverse of the fractional value; for example, a value of 2 would mean to use one half, a value of 4 would mean to use one quarter, etc. \(fn WPM &optional WORDLEN FRAC)" t nil) ;;;*** ;;;### (autoloads (uce-reply-to-uce) "uce" "mail/uce.el" (19259 35431)) ;;; Generated autoloads from mail/uce.el (autoload 'uce-reply-to-uce "uce" "\ Compose a reply to unsolicited commercial email (UCE). Sets up a reply buffer addressed to: the sender, his postmaster, his abuse@ address, and the postmaster of the mail relay used. You might need to set `uce-mail-reader' before using this. \(fn &optional IGNORED)" t nil) ;;;*** ;;;### (autoloads (ucs-normalize-HFS-NFC-string ucs-normalize-HFS-NFC-region ;;;;;; ucs-normalize-HFS-NFD-string ucs-normalize-HFS-NFD-region ;;;;;; ucs-normalize-NFKC-string ucs-normalize-NFKC-region ucs-normalize-NFKD-string ;;;;;; ucs-normalize-NFKD-region ucs-normalize-NFC-string ucs-normalize-NFC-region ;;;;;; ucs-normalize-NFD-string ucs-normalize-NFD-region) "ucs-normalize" ;;;;;; "international/ucs-normalize.el" (19259 35431)) ;;; Generated autoloads from international/ucs-normalize.el (autoload 'ucs-normalize-NFD-region "ucs-normalize" "\ Normalize the current region by the Unicode NFD. \(fn FROM TO)" t nil) (autoload 'ucs-normalize-NFD-string "ucs-normalize" "\ Normalize the string STR by the Unicode NFD. \(fn STR)" nil nil) (autoload 'ucs-normalize-NFC-region "ucs-normalize" "\ Normalize the current region by the Unicode NFC. \(fn FROM TO)" t nil) (autoload 'ucs-normalize-NFC-string "ucs-normalize" "\ Normalize the string STR by the Unicode NFC. \(fn STR)" nil nil) (autoload 'ucs-normalize-NFKD-region "ucs-normalize" "\ Normalize the current region by the Unicode NFKD. \(fn FROM TO)" t nil) (autoload 'ucs-normalize-NFKD-string "ucs-normalize" "\ Normalize the string STR by the Unicode NFKD. \(fn STR)" nil nil) (autoload 'ucs-normalize-NFKC-region "ucs-normalize" "\ Normalize the current region by the Unicode NFKC. \(fn FROM TO)" t nil) (autoload 'ucs-normalize-NFKC-string "ucs-normalize" "\ Normalize the string STR by the Unicode NFKC. \(fn STR)" nil nil) (autoload 'ucs-normalize-HFS-NFD-region "ucs-normalize" "\ Normalize the current region by the Unicode NFD and Mac OS's HFS Plus. \(fn FROM TO)" t nil) (autoload 'ucs-normalize-HFS-NFD-string "ucs-normalize" "\ Normalize the string STR by the Unicode NFD and Mac OS's HFS Plus. \(fn STR)" nil nil) (autoload 'ucs-normalize-HFS-NFC-region "ucs-normalize" "\ Normalize the current region by the Unicode NFC and Mac OS's HFS Plus. \(fn FROM TO)" t nil) (autoload 'ucs-normalize-HFS-NFC-string "ucs-normalize" "\ Normalize the string STR by the Unicode NFC and Mac OS's HFS Plus. \(fn STR)" nil nil) ;;;*** ;;;### (autoloads (ununderline-region underline-region) "underline" ;;;;;; "textmodes/underline.el" (19259 35431)) ;;; Generated autoloads from textmodes/underline.el (autoload 'underline-region "underline" "\ Underline all nonblank characters in the region. Works by overstriking underscores. Called from program, takes two arguments START and END which specify the range to operate on. \(fn START END)" t nil) (autoload 'ununderline-region "underline" "\ Remove all underlining (overstruck underscores) in the region. Called from program, takes two arguments START and END which specify the range to operate on. \(fn START END)" t nil) ;;;*** ;;;### (autoloads (unrmail batch-unrmail) "unrmail" "mail/unrmail.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from mail/unrmail.el (autoload 'batch-unrmail "unrmail" "\ Convert old-style Rmail Babyl files to system inbox format. Specify the input Rmail Babyl file names as command line arguments. For each Rmail file, the corresponding output file name is made by adding `.mail' at the end. For example, invoke `emacs -batch -f batch-unrmail RMAIL'. \(fn)" nil nil) (autoload 'unrmail "unrmail" "\ Convert old-style Rmail Babyl file FILE to system inbox format file TO-FILE. \(fn FILE TO-FILE)" t nil) ;;;*** ;;;### (autoloads (unsafep) "unsafep" "emacs-lisp/unsafep.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from emacs-lisp/unsafep.el (autoload 'unsafep "unsafep" "\ Return nil if evaluating FORM couldn't possibly do any harm. Otherwise result is a reason why FORM is unsafe. UNSAFEP-VARS is a list of symbols with local bindings. \(fn FORM &optional UNSAFEP-VARS)" nil nil) ;;;*** ;;;### (autoloads (url-retrieve-synchronously url-retrieve) "url" ;;;;;; "url/url.el" (19259 35432)) ;;; Generated autoloads from url/url.el (autoload 'url-retrieve "url" "\ Retrieve URL asynchronously and call CALLBACK with CBARGS when finished. URL is either a string or a parsed URL. CALLBACK is called when the object has been completely retrieved, with the current buffer containing the object, and any MIME headers associated with it. It is called as (apply CALLBACK STATUS CBARGS). STATUS is a list with an even number of elements representing what happened during the request, with most recent events first, or an empty list if no events have occurred. Each pair is one of: \(:redirect REDIRECTED-TO) - the request was redirected to this URL \(:error (ERROR-SYMBOL . DATA)) - an error occurred. The error can be signaled with (signal ERROR-SYMBOL DATA). Return the buffer URL will load into, or nil if the process has already completed (i.e. URL was a mailto URL or similar; in this case the callback is not called). The variables `url-request-data', `url-request-method' and `url-request-extra-headers' can be dynamically bound around the request; dynamic binding of other variables doesn't necessarily take effect. \(fn URL CALLBACK &optional CBARGS)" nil nil) (autoload 'url-retrieve-synchronously "url" "\ Retrieve URL synchronously. Return the buffer containing the data, or nil if there are no data associated with it (the case for dired, info, or mailto URLs that need no further processing). URL is either a string or a parsed URL. \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-register-auth-scheme url-get-authentication) ;;;;;; "url-auth" "url/url-auth.el" (19259 35432)) ;;; Generated autoloads from url/url-auth.el (autoload 'url-get-authentication "url-auth" "\ Return an authorization string suitable for use in the WWW-Authenticate header in an HTTP/1.0 request. URL is the url you are requesting authorization to. This can be either a string representing the URL, or the parsed representation returned by `url-generic-parse-url' REALM is the realm at a specific site we are looking for. This should be a string specifying the exact realm, or nil or the symbol 'any' to specify that the filename portion of the URL should be used as the realm TYPE is the type of authentication to be returned. This is either a string representing the type (basic, digest, etc), or nil or the symbol 'any' to specify that any authentication is acceptable. If requesting 'any' the strongest matching authentication will be returned. If this is wrong, it's no big deal, the error from the server will specify exactly what type of auth to use PROMPT is boolean - specifies whether to ask the user for a username/password if one cannot be found in the cache \(fn URL REALM TYPE PROMPT &optional ARGS)" nil nil) (autoload 'url-register-auth-scheme "url-auth" "\ Register an HTTP authentication method. TYPE is a string or symbol specifying the name of the method. This should be the same thing you expect to get returned in an Authenticate header in HTTP/1.0 - it will be downcased. FUNCTION is the function to call to get the authorization information. This defaults to `url-?-auth', where ? is TYPE. RATING a rating between 1 and 10 of the strength of the authentication. This is used when asking for the best authentication for a specific URL. The item with the highest rating is returned. \(fn TYPE &optional FUNCTION RATING)" nil nil) ;;;*** ;;;### (autoloads (url-cache-expired url-cache-extract url-is-cached ;;;;;; url-store-in-cache) "url-cache" "url/url-cache.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from url/url-cache.el (autoload 'url-store-in-cache "url-cache" "\ Store buffer BUFF in the cache. \(fn &optional BUFF)" nil nil) (autoload 'url-is-cached "url-cache" "\ Return non-nil if the URL is cached. \(fn URL)" nil nil) (autoload 'url-cache-extract "url-cache" "\ Extract FNAM from the local disk cache. \(fn FNAM)" nil nil) (autoload 'url-cache-expired "url-cache" "\ Return t if a cached file has expired. \(fn URL MOD)" nil nil) ;;;*** ;;;### (autoloads (url-cid) "url-cid" "url/url-cid.el" (19259 35432)) ;;; Generated autoloads from url/url-cid.el (autoload 'url-cid "url-cid" "\ Not documented \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-dav-vc-registered url-dav-supported-p) "url-dav" ;;;;;; "url/url-dav.el" (19259 35432)) ;;; Generated autoloads from url/url-dav.el (autoload 'url-dav-supported-p "url-dav" "\ Not documented \(fn URL)" nil nil) (autoload 'url-dav-vc-registered "url-dav" "\ Not documented \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-file) "url-file" "url/url-file.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from url/url-file.el (autoload 'url-file "url-file" "\ Handle file: and ftp: URLs. \(fn URL CALLBACK CBARGS)" nil nil) ;;;*** ;;;### (autoloads (url-open-stream url-gateway-nslookup-host) "url-gw" ;;;;;; "url/url-gw.el" (19259 35432)) ;;; Generated autoloads from url/url-gw.el (autoload 'url-gateway-nslookup-host "url-gw" "\ Attempt to resolve the given HOST using nslookup if possible. \(fn HOST)" t nil) (autoload 'url-open-stream "url-gw" "\ Open a stream to HOST, possibly via a gateway. Args per `open-network-stream'. Will not make a connection if `url-gateway-unplugged' is non-nil. Might do a non-blocking connection; use `process-status' to check. \(fn NAME BUFFER HOST SERVICE)" nil nil) ;;;*** ;;;### (autoloads (url-insert-file-contents url-file-local-copy url-copy-file ;;;;;; url-file-handler url-handler-mode) "url-handlers" "url/url-handlers.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from url/url-handlers.el (defvar url-handler-mode nil "\ Non-nil if Url-Handler mode is enabled. See the command `url-handler-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `url-handler-mode'.") (custom-autoload 'url-handler-mode "url-handlers" nil) (autoload 'url-handler-mode "url-handlers" "\ Use URL to handle URL-like file names. \(fn &optional ARG)" t nil) (autoload 'url-file-handler "url-handlers" "\ Function called from the `file-name-handler-alist' routines. OPERATION is what needs to be done (`file-exists-p', etc). ARGS are the arguments that would have been passed to OPERATION. \(fn OPERATION &rest ARGS)" nil nil) (autoload 'url-copy-file "url-handlers" "\ Copy URL to NEWNAME. Both args must be strings. Signals a `file-already-exists' error if file NEWNAME already exists, unless a third argument OK-IF-ALREADY-EXISTS is supplied and non-nil. A number as third arg means request confirmation if NEWNAME already exists. This is what happens in interactive use with M-x. Fourth arg KEEP-TIME non-nil means give the new file the same last-modified time as the old one. (This works on only some systems.) Fifth arg PRESERVE-UID-GID is ignored. A prefix arg makes KEEP-TIME non-nil. \(fn URL NEWNAME &optional OK-IF-ALREADY-EXISTS KEEP-TIME PRESERVE-UID-GID)" nil nil) (autoload 'url-file-local-copy "url-handlers" "\ Copy URL into a temporary file on this machine. Returns the name of the local copy, or nil, if FILE is directly accessible. \(fn URL &rest IGNORED)" nil nil) (autoload 'url-insert-file-contents "url-handlers" "\ Not documented \(fn URL &optional VISIT BEG END REPLACE)" nil nil) ;;;*** ;;;### (autoloads (url-http-options url-http-file-attributes url-http-file-exists-p ;;;;;; url-http) "url-http" "url/url-http.el" (19259 35432)) ;;; Generated autoloads from url/url-http.el (autoload 'url-http "url-http" "\ Retrieve URL via HTTP asynchronously. URL must be a parsed URL. See `url-generic-parse-url' for details. When retrieval is completed, the function CALLBACK is executed with CBARGS as the arguments. \(fn URL CALLBACK CBARGS)" nil nil) (autoload 'url-http-file-exists-p "url-http" "\ Not documented \(fn URL)" nil nil) (defalias 'url-http-file-readable-p 'url-http-file-exists-p) (autoload 'url-http-file-attributes "url-http" "\ Not documented \(fn URL &optional ID-FORMAT)" nil nil) (autoload 'url-http-options "url-http" "\ Return a property list describing options available for URL. This list is retrieved using the `OPTIONS' HTTP method. Property list members: methods A list of symbols specifying what HTTP methods the resource supports. dav A list of numbers specifying what DAV protocol/schema versions are supported. dasl A list of supported DASL search types supported (string form) ranges A list of the units available for use in partial document fetches. p3p The `Platform For Privacy Protection' description for the resource. Currently this is just the raw header contents. This is likely to change once P3P is formally supported by the URL package or Emacs/W3. \(fn URL)" nil nil) (defconst url-https-default-port 443 "\ Default HTTPS port.") (defconst url-https-asynchronous-p t "\ HTTPS retrievals are asynchronous.") (autoload 'url-default-expander "url-expand") (defalias 'url-https-expand-file-name 'url-default-expander) (autoload 'url-https "url-http") (autoload 'url-https-file-exists-p "url-http") (autoload 'url-https-file-readable-p "url-http") (autoload 'url-https-file-attributes "url-http") ;;;*** ;;;### (autoloads (url-irc) "url-irc" "url/url-irc.el" (19259 35432)) ;;; Generated autoloads from url/url-irc.el (autoload 'url-irc "url-irc" "\ Not documented \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-ldap) "url-ldap" "url/url-ldap.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from url/url-ldap.el (autoload 'url-ldap "url-ldap" "\ Perform an LDAP search specified by URL. The return value is a buffer displaying the search results in HTML. URL can be a URL string, or a URL vector of the type returned by `url-generic-parse-url'. \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-mailto url-mail) "url-mailto" "url/url-mailto.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from url/url-mailto.el (autoload 'url-mail "url-mailto" "\ Not documented \(fn &rest ARGS)" t nil) (autoload 'url-mailto "url-mailto" "\ Handle the mailto: URL syntax. \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-data url-generic-emulator-loader url-info ;;;;;; url-man) "url-misc" "url/url-misc.el" (19259 35432)) ;;; Generated autoloads from url/url-misc.el (autoload 'url-man "url-misc" "\ Fetch a Unix manual page URL. \(fn URL)" nil nil) (autoload 'url-info "url-misc" "\ Fetch a GNU Info URL. \(fn URL)" nil nil) (autoload 'url-generic-emulator-loader "url-misc" "\ Not documented \(fn URL)" nil nil) (defalias 'url-rlogin 'url-generic-emulator-loader) (defalias 'url-telnet 'url-generic-emulator-loader) (defalias 'url-tn3270 'url-generic-emulator-loader) (autoload 'url-data "url-misc" "\ Fetch a data URL (RFC 2397). \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-snews url-news) "url-news" "url/url-news.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from url/url-news.el (autoload 'url-news "url-news" "\ Not documented \(fn URL)" nil nil) (autoload 'url-snews "url-news" "\ Not documented \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-ns-user-pref url-ns-prefs isInNet isResolvable ;;;;;; dnsResolve dnsDomainIs isPlainHostName) "url-ns" "url/url-ns.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from url/url-ns.el (autoload 'isPlainHostName "url-ns" "\ Not documented \(fn HOST)" nil nil) (autoload 'dnsDomainIs "url-ns" "\ Not documented \(fn HOST DOM)" nil nil) (autoload 'dnsResolve "url-ns" "\ Not documented \(fn HOST)" nil nil) (autoload 'isResolvable "url-ns" "\ Not documented \(fn HOST)" nil nil) (autoload 'isInNet "url-ns" "\ Not documented \(fn IP NET MASK)" nil nil) (autoload 'url-ns-prefs "url-ns" "\ Not documented \(fn &optional FILE)" nil nil) (autoload 'url-ns-user-pref "url-ns" "\ Not documented \(fn KEY &optional DEFAULT)" nil nil) ;;;*** ;;;### (autoloads (url-generic-parse-url url-recreate-url) "url-parse" ;;;;;; "url/url-parse.el" (19259 35432)) ;;; Generated autoloads from url/url-parse.el (autoload 'url-recreate-url "url-parse" "\ Recreate a URL string from the parsed URLOBJ. \(fn URLOBJ)" nil nil) (autoload 'url-generic-parse-url "url-parse" "\ Return an URL-struct of the parts of URL. The CL-style struct contains the following fields: TYPE USER PASSWORD HOST PORTSPEC FILENAME TARGET ATTRIBUTES FULLNESS. \(fn URL)" nil nil) ;;;*** ;;;### (autoloads (url-setup-privacy-info) "url-privacy" "url/url-privacy.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from url/url-privacy.el (autoload 'url-setup-privacy-info "url-privacy" "\ Setup variables that expose info about you and your system. \(fn)" t nil) ;;;*** ;;;### (autoloads (url-view-url url-truncate-url-for-viewing url-file-extension ;;;;;; url-hexify-string url-unhex-string url-parse-query-string ;;;;;; url-file-nondirectory url-file-directory url-percentage url-display-percentage ;;;;;; url-pretty-length url-strip-leading-spaces url-eat-trailing-space ;;;;;; url-get-normalized-date url-lazy-message url-normalize-url ;;;;;; url-insert-entities-in-string url-parse-args url-debug url-debug) ;;;;;; "url-util" "url/url-util.el" (19259 35432)) ;;; Generated autoloads from url/url-util.el (defvar url-debug nil "\ *What types of debug messages from the URL library to show. Debug messages are logged to the *URL-DEBUG* buffer. If t, all messages will be logged. If a number, all messages will be logged, as well shown via `message'. If a list, it is a list of the types of messages to be logged.") (custom-autoload 'url-debug "url-util" t) (autoload 'url-debug "url-util" "\ Not documented \(fn TAG &rest ARGS)" nil nil) (autoload 'url-parse-args "url-util" "\ Not documented \(fn STR &optional NODOWNCASE)" nil nil) (autoload 'url-insert-entities-in-string "url-util" "\ Convert HTML markup-start characters to entity references in STRING. Also replaces the \" character, so that the result may be safely used as an attribute value in a tag. Returns a new string with the result of the conversion. Replaces these characters as follows: & ==> & < ==> < > ==> > \" ==> " \(fn STRING)" nil nil) (autoload 'url-normalize-url "url-util" "\ Return a 'normalized' version of URL. Strips out default port numbers, etc. \(fn URL)" nil nil) (autoload 'url-lazy-message "url-util" "\ Just like `message', but is a no-op if called more than once a second. Will not do anything if `url-show-status' is nil. \(fn &rest ARGS)" nil nil) (autoload 'url-get-normalized-date "url-util" "\ Return a 'real' date string that most HTTP servers can understand. \(fn &optional SPECIFIED-TIME)" nil nil) (autoload 'url-eat-trailing-space "url-util" "\ Remove spaces/tabs at the end of a string. \(fn X)" nil nil) (autoload 'url-strip-leading-spaces "url-util" "\ Remove spaces at the front of a string. \(fn X)" nil nil) (autoload 'url-pretty-length "url-util" "\ Not documented \(fn N)" nil nil) (autoload 'url-display-percentage "url-util" "\ Not documented \(fn FMT PERC &rest ARGS)" nil nil) (autoload 'url-percentage "url-util" "\ Not documented \(fn X Y)" nil nil) (defalias 'url-basepath 'url-file-directory) (autoload 'url-file-directory "url-util" "\ Return the directory part of FILE, for a URL. \(fn FILE)" nil nil) (autoload 'url-file-nondirectory "url-util" "\ Return the nondirectory part of FILE, for a URL. \(fn FILE)" nil nil) (autoload 'url-parse-query-string "url-util" "\ Not documented \(fn QUERY &optional DOWNCASE ALLOW-NEWLINES)" nil nil) (autoload 'url-unhex-string "url-util" "\ Remove %XX embedded spaces, etc in a URL. If optional second argument ALLOW-NEWLINES is non-nil, then allow the decoding of carriage returns and line feeds in the string, which is normally forbidden in URL encoding. \(fn STR &optional ALLOW-NEWLINES)" nil nil) (autoload 'url-hexify-string "url-util" "\ Return a new string that is STRING URI-encoded. First, STRING is converted to utf-8, if necessary. Then, for each character in the utf-8 string, those found in `url-unreserved-chars' are left as-is, all others are represented as a three-character string: \"%\" followed by two lowercase hex digits. \(fn STRING)" nil nil) (autoload 'url-file-extension "url-util" "\ Return the filename extension of FNAME. If optional argument X is t, then return the basename of the file with the extension stripped off. \(fn FNAME &optional X)" nil nil) (autoload 'url-truncate-url-for-viewing "url-util" "\ Return a shortened version of URL that is WIDTH characters wide or less. WIDTH defaults to the current frame width. \(fn URL &optional WIDTH)" nil nil) (autoload 'url-view-url "url-util" "\ View the current document's URL. Optional argument NO-SHOW means just return the URL, don't show it in the minibuffer. This uses `url-current-object', set locally to the buffer. \(fn &optional NO-SHOW)" t nil) ;;;*** ;;;### (autoloads (ask-user-about-supersession-threat ask-user-about-lock) ;;;;;; "userlock" "userlock.el" (19259 35432)) ;;; Generated autoloads from userlock.el (autoload 'ask-user-about-lock "userlock" "\ Ask user what to do when he wants to edit FILE but it is locked by OPPONENT. This function has a choice of three things to do: do (signal 'file-locked (list FILE OPPONENT)) to refrain from editing the file return t (grab the lock on the file) return nil (edit the file even though it is locked). You can redefine this function to choose among those three alternatives in any way you like. \(fn FILE OPPONENT)" nil nil) (autoload 'ask-user-about-supersession-threat "userlock" "\ Ask a user who is about to modify an obsolete buffer what to do. This function has two choices: it can return, in which case the modification of the buffer will proceed, or it can (signal 'file-supersession (file)), in which case the proposed buffer modification will not be made. You can rewrite this to use any criterion you like to choose which one to do. The buffer in question is current when this function is called. \(fn FN)" nil nil) ;;;*** ;;;### (autoloads (utf-7-imap-pre-write-conversion utf-7-pre-write-conversion ;;;;;; utf-7-imap-post-read-conversion utf-7-post-read-conversion) ;;;;;; "utf-7" "international/utf-7.el" (19259 35432)) ;;; Generated autoloads from international/utf-7.el (autoload 'utf-7-post-read-conversion "utf-7" "\ Not documented \(fn LEN)" nil nil) (autoload 'utf-7-imap-post-read-conversion "utf-7" "\ Not documented \(fn LEN)" nil nil) (autoload 'utf-7-pre-write-conversion "utf-7" "\ Not documented \(fn FROM TO)" nil nil) (autoload 'utf-7-imap-pre-write-conversion "utf-7" "\ Not documented \(fn FROM TO)" nil nil) ;;;*** ;;;### (autoloads (uudecode-decode-region uudecode-decode-region-internal ;;;;;; uudecode-decode-region-external) "uudecode" "mail/uudecode.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from mail/uudecode.el (autoload 'uudecode-decode-region-external "uudecode" "\ Uudecode region between START and END using external program. If FILE-NAME is non-nil, save the result to FILE-NAME. The program used is specified by `uudecode-decoder-program'. \(fn START END &optional FILE-NAME)" t nil) (autoload 'uudecode-decode-region-internal "uudecode" "\ Uudecode region between START and END without using an external program. If FILE-NAME is non-nil, save the result to FILE-NAME. \(fn START END &optional FILE-NAME)" t nil) (autoload 'uudecode-decode-region "uudecode" "\ Uudecode region between START and END. If FILE-NAME is non-nil, save the result to FILE-NAME. \(fn START END &optional FILE-NAME)" nil nil) ;;;*** ;;;### (autoloads (vc-branch-part vc-update-change-log vc-rename-file ;;;;;; vc-delete-file vc-transfer-file vc-switch-backend vc-update ;;;;;; vc-rollback vc-revert vc-print-root-log vc-print-log vc-retrieve-tag ;;;;;; vc-create-tag vc-merge vc-insert-headers vc-revision-other-window ;;;;;; vc-root-diff vc-diff vc-version-diff vc-register vc-next-action ;;;;;; vc-before-checkin-hook vc-checkin-hook vc-checkout-hook) ;;;;;; "vc" "vc.el" (19259 35432)) ;;; Generated autoloads from vc.el (defvar vc-checkout-hook nil "\ Normal hook (list of functions) run after checking out a file. See `run-hooks'.") (custom-autoload 'vc-checkout-hook "vc" t) (defvar vc-checkin-hook nil "\ Normal hook (list of functions) run after commit or file checkin. See also `log-edit-done-hook'.") (custom-autoload 'vc-checkin-hook "vc" t) (defvar vc-before-checkin-hook nil "\ Normal hook (list of functions) run before a commit or a file checkin. See `run-hooks'.") (custom-autoload 'vc-before-checkin-hook "vc" t) (autoload 'vc-next-action "vc" "\ Do the next logical version control operation on the current fileset. This requires that all files in the fileset be in the same state. For locking systems: If every file is not already registered, this registers each for version control. If every file is registered and not locked by anyone, this checks out a writable and locked file of each ready for editing. If every file is checked out and locked by the calling user, this first checks to see if each file has changed since checkout. If not, it performs a revert on that file. If every file has been changed, this pops up a buffer for entry of a log message; when the message has been entered, it checks in the resulting changes along with the log message as change commentary. If the variable `vc-keep-workfiles' is non-nil (which is its default), a read-only copy of each changed file is left in place afterwards. If the affected file is registered and locked by someone else, you are given the option to steal the lock(s). For merging systems: If every file is not already registered, this registers each one for version control. This does an add, but not a commit. If every file is added but not committed, each one is committed. If every working file is changed, but the corresponding repository file is unchanged, this pops up a buffer for entry of a log message; when the message has been entered, it checks in the resulting changes along with the logmessage as change commentary. A writable file is retained. If the repository file is changed, you are asked if you want to merge in the changes into your working copy. \(fn VERBOSE)" t nil) (autoload 'vc-register "vc" "\ Register into a version control system. If VC-FILESET is given, register the files in that fileset. Otherwise register the current file. With prefix argument SET-REVISION, allow user to specify initial revision level. If COMMENT is present, use that as an initial comment. The version control system to use is found by cycling through the list `vc-handled-backends'. The first backend in that list which declares itself responsible for the file (usually because other files in that directory are already registered under that backend) will be used to register the file. If no backend declares itself responsible, the first backend that could register the file is used. \(fn &optional SET-REVISION VC-FILESET COMMENT)" t nil) (autoload 'vc-version-diff "vc" "\ Report diffs between revisions of the fileset in the repository history. \(fn FILES REV1 REV2)" t nil) (autoload 'vc-diff "vc" "\ Display diffs between file revisions. Normally this compares the currently selected fileset with their working revisions. With a prefix argument HISTORIC, it reads two revision designators specifying which revisions to compare. The optional argument NOT-URGENT non-nil means it is ok to say no to saving the buffer. \(fn HISTORIC &optional NOT-URGENT)" t nil) (autoload 'vc-root-diff "vc" "\ Display diffs between file revisions. Normally this compares the currently selected fileset with their working revisions. With a prefix argument HISTORIC, it reads two revision designators specifying which revisions to compare. The optional argument NOT-URGENT non-nil means it is ok to say no to saving the buffer. \(fn HISTORIC &optional NOT-URGENT)" t nil) (autoload 'vc-revision-other-window "vc" "\ Visit revision REV of the current file in another window. If the current file is named `F', the revision is named `F.~REV~'. If `F.~REV~' already exists, use it instead of checking it out again. \(fn REV)" t nil) (autoload 'vc-insert-headers "vc" "\ Insert headers into a file for use with a version control system. Headers desired are inserted at point, and are pulled from the variable `vc-BACKEND-header'. \(fn)" t nil) (autoload 'vc-merge "vc" "\ Merge changes between two revisions into the current buffer's file. This asks for two revisions to merge from in the minibuffer. If the first revision is a branch number, then merge all changes from that branch. If the first revision is empty, merge news, i.e. recent changes from the current branch. See Info node `Merging'. \(fn)" t nil) (defalias 'vc-resolve-conflicts 'smerge-ediff) (autoload 'vc-create-tag "vc" "\ Descending recursively from DIR, make a tag called NAME. For each registered file, the working revision becomes part of the named configuration. If the prefix argument BRANCHP is given, the tag is made as a new branch and the files are checked out in that new branch. \(fn DIR NAME BRANCHP)" t nil) (autoload 'vc-retrieve-tag "vc" "\ Descending recursively from DIR, retrieve the tag called NAME. If NAME is empty, it refers to the latest revisions. If locking is used for the files in DIR, then there must not be any locked files at or below DIR (but if NAME is empty, locked files are allowed and simply skipped). \(fn DIR NAME)" t nil) (autoload 'vc-print-log "vc" "\ List the change log of the current fileset in a window. If WORKING-REVISION is non-nil, leave the point at that revision. \(fn &optional WORKING-REVISION LIMIT)" t nil) (autoload 'vc-print-root-log "vc" "\ List the change log of for the current VC controlled tree in a window. \(fn &optional LIMIT)" t nil) (autoload 'vc-revert "vc" "\ Revert working copies of the selected fileset to their repository contents. This asks for confirmation if the buffer contents are not identical to the working revision (except for keyword expansion). \(fn)" t nil) (autoload 'vc-rollback "vc" "\ Roll back (remove) the most recent changeset committed to the repository. This may be either a file-level or a repository-level operation, depending on the underlying version-control system. \(fn)" t nil) (define-obsolete-function-alias 'vc-revert-buffer 'vc-revert "23.1") (autoload 'vc-update "vc" "\ Update the current fileset's files to their tip revisions. For each one that contains no changes, and is not locked, then this simply replaces the work file with the latest revision on its branch. If the file contains changes, and the backend supports merging news, then any recent changes from the current branch are merged into the working file. \(fn)" t nil) (autoload 'vc-switch-backend "vc" "\ Make BACKEND the current version control system for FILE. FILE must already be registered in BACKEND. The change is not permanent, only for the current session. This function only changes VC's perspective on FILE, it does not register or unregister it. By default, this command cycles through the registered backends. To get a prompt, use a prefix argument. \(fn FILE BACKEND)" t nil) (autoload 'vc-transfer-file "vc" "\ Transfer FILE to another version control system NEW-BACKEND. If NEW-BACKEND has a higher precedence than FILE's current backend \(i.e. it comes earlier in `vc-handled-backends'), then register FILE in NEW-BACKEND, using the revision number from the current backend as the base level. If NEW-BACKEND has a lower precedence than the current backend, then commit all changes that were made under the current backend to NEW-BACKEND, and unregister FILE from the current backend. \(If FILE is not yet registered under NEW-BACKEND, register it.) \(fn FILE NEW-BACKEND)" nil nil) (autoload 'vc-delete-file "vc" "\ Delete file and mark it as such in the version control system. \(fn FILE)" t nil) (autoload 'vc-rename-file "vc" "\ Rename file OLD to NEW, and rename its master file likewise. \(fn OLD NEW)" t nil) (autoload 'vc-update-change-log "vc" "\ Find change log file and add entries from recent version control logs. Normally, find log entries for all registered files in the default directory. With prefix arg of \\[universal-argument], only find log entries for the current buffer's file. With any numeric prefix arg, find log entries for all currently visited files that are under version control. This puts all the entries in the log for the default directory, which may not be appropriate. From a program, any ARGS are assumed to be filenames for which log entries should be gathered. \(fn &rest ARGS)" t nil) (autoload 'vc-branch-part "vc" "\ Return the branch part of a revision number REV. \(fn REV)" nil nil) ;;;*** ;;;### (autoloads (vc-annotate) "vc-annotate" "vc-annotate.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from vc-annotate.el (autoload 'vc-annotate "vc-annotate" "\ Display the edit history of the current file using colors. This command creates a buffer that shows, for each line of the current file, when it was last edited and by whom. Additionally, colors are used to show the age of each line--blue means oldest, red means youngest, and intermediate colors indicate intermediate ages. By default, the time scale stretches back one year into the past; everything that is older than that is shown in blue. With a prefix argument, this command asks two questions in the minibuffer. First, you may enter a revision number; then the buffer displays and annotates that revision instead of the working revision \(type RET in the minibuffer to leave that default unchanged). Then, you are prompted for the time span in days which the color range should cover. For example, a time span of 20 days means that changes over the past 20 days are shown in red to blue, according to their age, and everything that is older than that is shown in blue. If MOVE-POINT-TO is given, move the point to that line. Customization variables: `vc-annotate-menu-elements' customizes the menu elements of the mode-specific menu. `vc-annotate-color-map' and `vc-annotate-very-old-color' define the mapping of time to colors. `vc-annotate-background' specifies the background color. \(fn FILE REV &optional DISPLAY-MODE BUF MOVE-POINT-TO)" t nil) ;;;*** ;;;### (autoloads nil "vc-arch" "vc-arch.el" (19259 35432)) ;;; Generated autoloads from vc-arch.el (defun vc-arch-registered (file) (if (vc-find-root file "{arch}/=tagging-method") (progn (load "vc-arch") (vc-arch-registered file)))) ;;;*** ;;;### (autoloads nil "vc-bzr" "vc-bzr.el" (19259 35432)) ;;; Generated autoloads from vc-bzr.el (defconst vc-bzr-admin-dirname ".bzr" "\ Name of the directory containing Bzr repository status files.") (defconst vc-bzr-admin-checkout-format-file (concat vc-bzr-admin-dirname "/checkout/format")) (defun vc-bzr-registered (file) (if (vc-find-root file vc-bzr-admin-checkout-format-file) (progn (load "vc-bzr") (vc-bzr-registered file)))) ;;;*** ;;;### (autoloads nil "vc-cvs" "vc-cvs.el" (19259 35432)) ;;; Generated autoloads from vc-cvs.el (defun vc-cvs-registered (f) (when (file-readable-p (expand-file-name "CVS/Entries" (file-name-directory f))) (load "vc-cvs") (vc-cvs-registered f))) ;;;*** ;;;### (autoloads (vc-dir) "vc-dir" "vc-dir.el" (19259 35432)) ;;; Generated autoloads from vc-dir.el (autoload 'vc-dir "vc-dir" "\ Show the VC status for \"interesting\" files in and below DIR. This allows you to mark files and perform VC operations on them. The list omits files which are up to date, with no changes in your copy or the repository, if there is nothing in particular to say about them. Preparing the list of file status takes time; when the buffer first appears, it has only the first few lines of summary information. The file lines appear later. Optional second argument BACKEND specifies the VC backend to use. Interactively, a prefix argument means to ask for the backend. These are the commands available for use in the file status buffer: \\{vc-dir-mode-map} \(fn DIR &optional BACKEND)" t nil) ;;;*** ;;;### (autoloads (vc-do-command) "vc-dispatcher" "vc-dispatcher.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from vc-dispatcher.el (autoload 'vc-do-command "vc-dispatcher" "\ Execute a slave command, notifying user and checking for errors. Output from COMMAND goes to BUFFER, or the current buffer if BUFFER is t. If the destination buffer is not already current, set it up properly and erase it. The command is considered successful if its exit status does not exceed OKSTATUS (if OKSTATUS is nil, that means to ignore error status, if it is `async', that means not to wait for termination of the subprocess; if it is t it means to ignore all execution errors). FILE-OR-LIST is the name of a working file; it may be a list of files or be nil (to execute commands that don't expect a file name or set of files). If an optional list of FLAGS is present, that is inserted into the command line before the filename. Return the return value of the slave command in the synchronous case, and the process object in the asynchronous case. \(fn BUFFER OKSTATUS COMMAND FILE-OR-LIST &rest FLAGS)" nil nil) ;;;*** ;;;### (autoloads nil "vc-git" "vc-git.el" (19259 35432)) ;;; Generated autoloads from vc-git.el (defun vc-git-registered (file) "Return non-nil if FILE is registered with git." (if (vc-find-root file ".git") ; short cut (progn (load "vc-git") (vc-git-registered file)))) ;;;*** ;;;### (autoloads nil "vc-hg" "vc-hg.el" (19259 35432)) ;;; Generated autoloads from vc-hg.el (defun vc-hg-registered (file) "Return non-nil if FILE is registered with hg." (if (vc-find-root file ".hg") ; short cut (progn (load "vc-hg") (vc-hg-registered file)))) ;;;*** ;;;### (autoloads nil "vc-mtn" "vc-mtn.el" (19259 35432)) ;;; Generated autoloads from vc-mtn.el (defconst vc-mtn-admin-dir "_MTN") (defconst vc-mtn-admin-format (concat vc-mtn-admin-dir "/format")) (defun vc-mtn-registered (file) (if (vc-find-root file vc-mtn-admin-format) (progn (load "vc-mtn") (vc-mtn-registered file)))) ;;;*** ;;;### (autoloads (vc-rcs-master-templates) "vc-rcs" "vc-rcs.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from vc-rcs.el (defvar vc-rcs-master-templates (purecopy '("%sRCS/%s,v" "%s%s,v" "%sRCS/%s")) "\ Where to look for RCS master files. For a description of possible values, see `vc-check-master-templates'.") (custom-autoload 'vc-rcs-master-templates "vc-rcs" t) (defun vc-rcs-registered (f) (vc-default-registered 'RCS f)) ;;;*** ;;;### (autoloads (vc-sccs-master-templates) "vc-sccs" "vc-sccs.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from vc-sccs.el (defvar vc-sccs-master-templates (purecopy '("%sSCCS/s.%s" "%ss.%s" vc-sccs-search-project-dir)) "\ Where to look for SCCS master files. For a description of possible values, see `vc-check-master-templates'.") (custom-autoload 'vc-sccs-master-templates "vc-sccs" t) (defun vc-sccs-registered(f) (vc-default-registered 'SCCS f)) (defun vc-sccs-search-project-dir (dirname basename) "\ Return the name of a master file in the SCCS project directory. Does not check whether the file exists but returns nil if it does not find any project directory." (let ((project-dir (getenv "PROJECTDIR")) dirs dir) (when project-dir (if (file-name-absolute-p project-dir) (setq dirs (quote ("SCCS" ""))) (setq dirs (quote ("src/SCCS" "src" "source/SCCS" "source"))) (setq project-dir (expand-file-name (concat "~" project-dir)))) (while (and (not dir) dirs) (setq dir (expand-file-name (car dirs) project-dir)) (unless (file-directory-p dir) (setq dir nil) (setq dirs (cdr dirs)))) (and dir (expand-file-name (concat "s." basename) dir))))) ;;;*** ;;;### (autoloads nil "vc-svn" "vc-svn.el" (19259 35432)) ;;; Generated autoloads from vc-svn.el (defun vc-svn-registered (f) (let ((admin-dir (cond ((and (eq system-type 'windows-nt) (getenv "SVN_ASP_DOT_NET_HACK")) "_svn") (t ".svn")))) (when (file-readable-p (expand-file-name (concat admin-dir "/entries") (file-name-directory f))) (load "vc-svn") (vc-svn-registered f)))) ;;;*** ;;;### (autoloads (vera-mode) "vera-mode" "progmodes/vera-mode.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from progmodes/vera-mode.el (add-to-list 'auto-mode-alist (cons (purecopy "\\.vr[hi]?\\'") 'vera-mode)) (autoload 'vera-mode "vera-mode" "\ Major mode for editing Vera code. Usage: ------ INDENTATION: Typing `TAB' at the beginning of a line indents the line. The amount of indentation is specified by option `vera-basic-offset'. Indentation can be done for an entire region (`M-C-\\') or buffer (menu). `TAB' always indents the line if option `vera-intelligent-tab' is nil. WORD/COMMAND COMPLETION: Typing `TAB' after a (not completed) word looks for a word in the buffer or a Vera keyword that starts alike, inserts it and adjusts case. Re-typing `TAB' toggles through alternative word completions. Typing `TAB' after a non-word character inserts a tabulator stop (if not at the beginning of a line). `M-TAB' always inserts a tabulator stop. COMMENTS: `C-c C-c' comments out a region if not commented out, and uncomments a region if already commented out. HIGHLIGHTING (fontification): Vera keywords, predefined types and constants, function names, declaration names, directives, as well as comments and strings are highlighted using different colors. VERA VERSION: OpenVera 1.4 and Vera version 6.2.8. Maintenance: ------------ To submit a bug report, use the corresponding menu entry within Vera Mode. Add a description of the problem and include a reproducible test case. Feel free to send questions and enhancement requests to <reto@gnu.org>. Official distribution is at URL `http://www.iis.ee.ethz.ch/~zimmi/emacs/vera-mode.html' The Vera Mode Maintainer Reto Zimmermann <reto@gnu.org> Key bindings: ------------- \\{vera-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (verilog-mode) "verilog-mode" "progmodes/verilog-mode.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from progmodes/verilog-mode.el (autoload 'verilog-mode "verilog-mode" "\ Major mode for editing Verilog code. \\<verilog-mode-map> See \\[describe-function] verilog-auto (\\[verilog-auto]) for details on how AUTOs can improve coding efficiency. Use \\[verilog-faq] for a pointer to frequently asked questions. NEWLINE, TAB indents for Verilog code. Delete converts tabs to spaces as it moves back. Supports highlighting. Turning on Verilog mode calls the value of the variable `verilog-mode-hook' with no args, if that value is non-nil. Variables controlling indentation/edit style: variable `verilog-indent-level' (default 3) Indentation of Verilog statements with respect to containing block. `verilog-indent-level-module' (default 3) Absolute indentation of Module level Verilog statements. Set to 0 to get initial and always statements lined up on the left side of your screen. `verilog-indent-level-declaration' (default 3) Indentation of declarations with respect to containing block. Set to 0 to get them list right under containing block. `verilog-indent-level-behavioral' (default 3) Indentation of first begin in a task or function block Set to 0 to get such code to lined up underneath the task or function keyword. `verilog-indent-level-directive' (default 1) Indentation of `ifdef/`endif blocks. `verilog-cexp-indent' (default 1) Indentation of Verilog statements broken across lines i.e.: if (a) begin `verilog-case-indent' (default 2) Indentation for case statements. `verilog-auto-newline' (default nil) Non-nil means automatically newline after semicolons and the punctuation mark after an end. `verilog-auto-indent-on-newline' (default t) Non-nil means automatically indent line after newline. `verilog-tab-always-indent' (default t) Non-nil means TAB in Verilog mode should always reindent the current line, regardless of where in the line point is when the TAB command is used. `verilog-indent-begin-after-if' (default t) Non-nil means to indent begin statements following a preceding if, else, while, for and repeat statements, if any. Otherwise, the begin is lined up with the preceding token. If t, you get: if (a) begin // amount of indent based on `verilog-cexp-indent' otherwise you get: if (a) begin `verilog-auto-endcomments' (default t) Non-nil means a comment /* ... */ is set after the ends which ends cases, tasks, functions and modules. The type and name of the object will be set between the braces. `verilog-minimum-comment-distance' (default 10) Minimum distance (in lines) between begin and end required before a comment will be inserted. Setting this variable to zero results in every end acquiring a comment; the default avoids too many redundant comments in tight quarters. `verilog-auto-lineup' (default 'declarations) List of contexts where auto lineup of code should be done. Variables controlling other actions: `verilog-linter' (default surelint) Unix program to call to run the lint checker. This is the default command for \\[compile-command] and \\[verilog-auto-save-compile]. See \\[customize] for the complete list of variables. AUTO expansion functions are, in part: \\[verilog-auto] Expand AUTO statements. \\[verilog-delete-auto] Remove the AUTOs. \\[verilog-inject-auto] Insert AUTOs for the first time. Some other functions are: \\[verilog-complete-word] Complete word with appropriate possibilities. \\[verilog-mark-defun] Mark function. \\[verilog-beg-of-defun] Move to beginning of current function. \\[verilog-end-of-defun] Move to end of current function. \\[verilog-label-be] Label matching begin ... end, fork ... join, etc statements. \\[verilog-comment-region] Put marked area in a comment. \\[verilog-uncomment-region] Uncomment an area commented with \\[verilog-comment-region]. \\[verilog-insert-block] Insert begin ... end. \\[verilog-star-comment] Insert /* ... */. \\[verilog-sk-always] Insert an always @(AS) begin .. end block. \\[verilog-sk-begin] Insert a begin .. end block. \\[verilog-sk-case] Insert a case block, prompting for details. \\[verilog-sk-for] Insert a for (...) begin .. end block, prompting for details. \\[verilog-sk-generate] Insert a generate .. endgenerate block. \\[verilog-sk-header] Insert a header block at the top of file. \\[verilog-sk-initial] Insert an initial begin .. end block. \\[verilog-sk-fork] Insert a fork begin .. end .. join block. \\[verilog-sk-module] Insert a module .. (/*AUTOARG*/);.. endmodule block. \\[verilog-sk-primitive] Insert a primitive .. (.. );.. endprimitive block. \\[verilog-sk-repeat] Insert a repeat (..) begin .. end block. \\[verilog-sk-specify] Insert a specify .. endspecify block. \\[verilog-sk-task] Insert a task .. begin .. end endtask block. \\[verilog-sk-while] Insert a while (...) begin .. end block, prompting for details. \\[verilog-sk-casex] Insert a casex (...) item: begin.. end endcase block, prompting for details. \\[verilog-sk-casez] Insert a casez (...) item: begin.. end endcase block, prompting for details. \\[verilog-sk-if] Insert an if (..) begin .. end block. \\[verilog-sk-else-if] Insert an else if (..) begin .. end block. \\[verilog-sk-comment] Insert a comment block. \\[verilog-sk-assign] Insert an assign .. = ..; statement. \\[verilog-sk-function] Insert a function .. begin .. end endfunction block. \\[verilog-sk-input] Insert an input declaration, prompting for details. \\[verilog-sk-output] Insert an output declaration, prompting for details. \\[verilog-sk-state-machine] Insert a state machine definition, prompting for details. \\[verilog-sk-inout] Insert an inout declaration, prompting for details. \\[verilog-sk-wire] Insert a wire declaration, prompting for details. \\[verilog-sk-reg] Insert a register declaration, prompting for details. \\[verilog-sk-define-signal] Define signal under point as a register at the top of the module. All key bindings can be seen in a Verilog-buffer with \\[describe-bindings]. Key bindings specific to `verilog-mode-map' are: \\{verilog-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (vhdl-mode) "vhdl-mode" "progmodes/vhdl-mode.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from progmodes/vhdl-mode.el (autoload 'vhdl-mode "vhdl-mode" "\ Major mode for editing VHDL code. Usage: ------ TEMPLATE INSERTION (electrification): After typing a VHDL keyword and entering `SPC', you are prompted for arguments while a template is generated for that VHDL construct. Typing `RET' or `C-g' at the first (mandatory) prompt aborts the current template generation. Optional arguments are indicated by square brackets and removed if the queried string is left empty. Prompts for mandatory arguments remain in the code if the queried string is left empty. They can be queried again by `C-c C-t C-q'. Enabled electrification is indicated by `/e' in the modeline. Typing `M-SPC' after a keyword inserts a space without calling the template generator. Automatic template generation (i.e. electrification) can be disabled (enabled) by typing `C-c C-m C-e' or by setting option `vhdl-electric-mode' (see OPTIONS). Template generators can be invoked from the VHDL menu, by key bindings, by typing `C-c C-i C-c' and choosing a construct, or by typing the keyword (i.e. first word of menu entry not in parenthesis) and `SPC'. The following abbreviations can also be used: arch, attr, cond, conf, comp, cons, func, inst, pack, sig, var. Template styles can be customized in customization group `vhdl-template' (see OPTIONS). HEADER INSERTION: A file header can be inserted by `C-c C-t C-h'. A file footer (template at the end of the file) can be inserted by `C-c C-t C-f'. See customization group `vhdl-header'. STUTTERING: Double striking of some keys inserts cumbersome VHDL syntax elements. Stuttering can be disabled (enabled) by typing `C-c C-m C-s' or by option `vhdl-stutter-mode'. Enabled stuttering is indicated by `/s' in the modeline. The stuttering keys and their effects are: ;; --> \" : \" [ --> ( -- --> comment ;;; --> \" := \" [[ --> [ --CR --> comment-out code .. --> \" => \" ] --> ) --- --> horizontal line ,, --> \" <= \" ]] --> ] ---- --> display comment == --> \" == \" '' --> \\\" WORD COMPLETION: Typing `TAB' after a (not completed) word looks for a VHDL keyword or a word in the buffer that starts alike, inserts it and adjusts case. Re-typing `TAB' toggles through alternative word completions. This also works in the minibuffer (i.e. in template generator prompts). Typing `TAB' after `(' looks for and inserts complete parenthesized expressions (e.g. for array index ranges). All keywords as well as standard types and subprograms of VHDL have predefined abbreviations (e.g. type \"std\" and `TAB' will toggle through all standard types beginning with \"std\"). Typing `TAB' after a non-word character indents the line if at the beginning of a line (i.e. no preceding non-blank characters), and inserts a tabulator stop otherwise. `M-TAB' always inserts a tabulator stop. COMMENTS: `--' puts a single comment. `---' draws a horizontal line for separating code segments. `----' inserts a display comment, i.e. two horizontal lines with a comment in between. `--CR' comments out code on that line. Re-hitting CR comments out following lines. `C-c c' comments out a region if not commented out, uncomments a region if already commented out. You are prompted for comments after object definitions (i.e. signals, variables, constants, ports) and after subprogram and process specifications if option `vhdl-prompt-for-comments' is non-nil. Comments are automatically inserted as additional labels (e.g. after begin statements) and as help comments if `vhdl-self-insert-comments' is non-nil. Inline comments (i.e. comments after a piece of code on the same line) are indented at least to `vhdl-inline-comment-column'. Comments go at maximum to `vhdl-end-comment-column'. `RET' after a space in a comment will open a new comment line. Typing beyond `vhdl-end-comment-column' in a comment automatically opens a new comment line. `M-q' re-fills multi-line comments. INDENTATION: `TAB' indents a line if at the beginning of the line. The amount of indentation is specified by option `vhdl-basic-offset'. `C-c C-i C-l' always indents the current line (is bound to `TAB' if option `vhdl-intelligent-tab' is nil). Indentation can be done for a group of lines (`C-c C-i C-g'), a region (`M-C-\\') or the entire buffer (menu). Argument and port lists are indented normally (nil) or relative to the opening parenthesis (non-nil) according to option `vhdl-argument-list-indent'. If option `vhdl-indent-tabs-mode' is nil, spaces are used instead of tabs. `M-x tabify' and `M-x untabify' allow to convert spaces to tabs and vice versa. Syntax-based indentation can be very slow in large files. Option `vhdl-indent-syntax-based' allows to use faster but simpler indentation. ALIGNMENT: The alignment functions align operators, keywords, and inline comments to beautify the code. `C-c C-a C-a' aligns a group of consecutive lines separated by blank lines, `C-c C-a C-i' a block of lines with same indent. `C-c C-a C-l' aligns all lines belonging to a list enclosed by a pair of parentheses (e.g. port clause/map, argument list), and `C-c C-a C-d' all lines within the declarative part of a design unit. `C-c C-a M-a' aligns an entire region. `C-c C-a C-c' aligns inline comments for a group of lines, and `C-c C-a M-c' for a region. If option `vhdl-align-groups' is non-nil, groups of code lines separated by special lines (see option `vhdl-align-group-separate') are aligned individually. If option `vhdl-align-same-indent' is non-nil, blocks of lines with same indent are aligned separately. Some templates are automatically aligned after generation if option `vhdl-auto-align' is non-nil. Alignment tries to align inline comments at `vhdl-inline-comment-column' and tries inline comment not to exceed `vhdl-end-comment-column'. `C-c C-x M-w' fixes up whitespace in a region. That is, operator symbols are surrounded by one space, and multiple spaces are eliminated. CODE FILLING: Code filling allows to condense code (e.g. sensitivity lists or port maps) by removing comments and newlines and re-wrapping so that all lines are maximally filled (block filling). `C-c C-f C-f' fills a list enclosed by parenthesis, `C-c C-f C-g' a group of lines separated by blank lines, `C-c C-f C-i' a block of lines with same indent, and `C-c C-f M-f' an entire region. CODE BEAUTIFICATION: `C-c M-b' and `C-c C-b' beautify the code of a region or of the entire buffer respectively. This inludes indentation, alignment, and case fixing. Code beautification can also be run non-interactively using the command: emacs -batch -l ~/.emacs filename.vhd -f vhdl-beautify-buffer PORT TRANSLATION: Generic and port clauses from entity or component declarations can be copied (`C-c C-p C-w') and pasted as entity and component declarations, as component instantiations and corresponding internal constants and signals, as a generic map with constants as actual generics, and as internal signal initializations (menu). To include formals in component instantiations, see option `vhdl-association-list-with-formals'. To include comments in pasting, see options `vhdl-include-...-comments'. A clause with several generic/port names on the same line can be flattened (`C-c C-p C-f') so that only one name per line exists. The direction of ports can be reversed (`C-c C-p C-r'), i.e., inputs become outputs and vice versa, which can be useful in testbenches. (This reversion is done on the internal data structure and is only reflected in subsequent paste operations.) Names for actual ports, instances, testbenches, and design-under-test instances can be derived from existing names according to options `vhdl-...-name'. See customization group `vhdl-port'. SUBPROGRAM TRANSLATION: Similar functionality exists for copying/pasting the interface of subprograms (function/procedure). A subprogram interface can be copied and then pasted as a subprogram declaration, body or call (uses association list with formals). TESTBENCH GENERATION: A copied port can also be pasted as a testbench. The generated testbench includes an entity, an architecture, and an optional configuration. The architecture contains the component declaration and instantiation of the DUT as well as internal constant and signal declarations. Additional user-defined templates can be inserted. The names used for entity/architecture/configuration/DUT as well as the file structure to be generated can be customized. See customization group `vhdl-testbench'. KEY BINDINGS: Key bindings (`C-c ...') exist for most commands (see in menu). VHDL MENU: All commands can be found in the VHDL menu including their key bindings. FILE BROWSER: The speedbar allows browsing of directories and file contents. It can be accessed from the VHDL menu and is automatically opened if option `vhdl-speedbar-auto-open' is non-nil. In speedbar, open files and directories with `mouse-2' on the name and browse/rescan their contents with `mouse-2'/`S-mouse-2' on the `+'. DESIGN HIERARCHY BROWSER: The speedbar can also be used for browsing the hierarchy of design units contained in the source files of the current directory or the specified projects (see option `vhdl-project-alist'). The speedbar can be switched between file, directory hierarchy and project hierarchy browsing mode in the speedbar menu or by typing `f', `h' or `H' in speedbar. In speedbar, open design units with `mouse-2' on the name and browse their hierarchy with `mouse-2' on the `+'. Ports can directly be copied from entities and components (in packages). Individual design units and complete designs can directly be compiled (\"Make\" menu entry). The hierarchy is automatically updated upon saving a modified source file when option `vhdl-speedbar-update-on-saving' is non-nil. The hierarchy is only updated for projects that have been opened once in the speedbar. The hierarchy is cached between Emacs sessions in a file (see options in group `vhdl-speedbar'). Simple design consistency checks are done during scanning, such as multiple declarations of the same unit or missing primary units that are required by secondary units. STRUCTURAL COMPOSITION: Enables simple structural composition. `C-c C-c C-n' creates a skeleton for a new component. Subcomponents (i.e. component declaration and instantiation) can be automatically placed from a previously read port (`C-c C-c C-p') or directly from the hierarchy browser (`P'). Finally, all subcomponents can be automatically connected using internal signals and ports (`C-c C-c C-w') following these rules: - subcomponent actual ports with same name are considered to be connected by a signal (internal signal or port) - signals that are only inputs to subcomponents are considered as inputs to this component -> input port created - signals that are only outputs from subcomponents are considered as outputs from this component -> output port created - signals that are inputs to AND outputs from subcomponents are considered as internal connections -> internal signal created Purpose: With appropriate naming conventions it is possible to create higher design levels with only a few mouse clicks or key strokes. A new design level can be created by simply generating a new component, placing the required subcomponents from the hierarchy browser, and wiring everything automatically. Note: Automatic wiring only works reliably on templates of new components and component instantiations that were created by VHDL mode. Component declarations can be placed in a components package (option `vhdl-use-components-package') which can be automatically generated for an entire directory or project (`C-c C-c M-p'). The VHDL'93 direct component instantiation is also supported (option `vhdl-use-direct-instantiation'). | Configuration declarations can automatically be generated either from | the menu (`C-c C-c C-f') (for the architecture the cursor is in) or from | the speedbar menu (for the architecture under the cursor). The | configurations can optionally be hierarchical (i.e. include all | component levels of a hierarchical design, option | `vhdl-compose-configuration-hierarchical') or include subconfigurations | (option `vhdl-compose-configuration-use-subconfiguration'). For | subcomponents in hierarchical configurations, the most-recently-analyzed | (mra) architecture is selected. If another architecture is desired, it | can be marked as most-recently-analyzed (speedbar menu) before | generating the configuration. | | Note: Configurations of subcomponents (i.e. hierarchical configuration | declarations) are currently not considered when displaying | configurations in speedbar. See the options group `vhdl-compose' for all relevant user options. SOURCE FILE COMPILATION: The syntax of the current buffer can be analyzed by calling a VHDL compiler (menu, `C-c C-k'). The compiler to be used is specified by option `vhdl-compiler'. The available compilers are listed in option `vhdl-compiler-alist' including all required compilation command, command options, compilation directory, and error message syntax information. New compilers can be added. All the source files of an entire design can be compiled by the `make' command (menu, `C-c M-C-k') if an appropriate Makefile exists. MAKEFILE GENERATION: Makefiles can be generated automatically by an internal generation routine (`C-c M-k'). The library unit dependency information is obtained from the hierarchy browser. Makefile generation can be customized for each compiler in option `vhdl-compiler-alist'. Makefile generation can also be run non-interactively using the command: emacs -batch -l ~/.emacs -l vhdl-mode [-compiler compilername] [-project projectname] -f vhdl-generate-makefile The Makefile's default target \"all\" compiles the entire design, the target \"clean\" removes it and the target \"library\" creates the library directory if not existent. The Makefile also includes a target for each primary library unit which allows selective compilation of this unit, its secondary units and its subhierarchy (example: compilation of a design specified by a configuration). User specific parts can be inserted into a Makefile with option `vhdl-makefile-generation-hook'. Limitations: - Only library units and dependencies within the current library are considered. Makefiles for designs that span multiple libraries are not (yet) supported. - Only one-level configurations are supported (also hierarchical), but configurations that go down several levels are not. - The \"others\" keyword in configurations is not supported. PROJECTS: Projects can be defined in option `vhdl-project-alist' and a current project be selected using option `vhdl-project' (permanently) or from the menu or speedbar (temporarily). For each project, title and description strings (for the file headers), source files/directories (for the hierarchy browser and Makefile generation), library name, and compiler-dependent options, exceptions and compilation directory can be specified. Compilation settings overwrite the settings of option `vhdl-compiler-alist'. Project setups can be exported (i.e. written to a file) and imported. Imported setups are not automatically saved in `vhdl-project-alist' but can be saved afterwards in its customization buffer. When starting Emacs with VHDL Mode (i.e. load a VHDL file or use \"emacs -l vhdl-mode\") in a directory with an existing project setup file, it is automatically loaded and its project activated if option `vhdl-project-auto-load' is non-nil. Names/paths of the project setup files can be specified in option `vhdl-project-file-name'. Multiple project setups can be automatically loaded from global directories. This is an alternative to specifying project setups with option `vhdl-project-alist'. SPECIAL MENUES: As an alternative to the speedbar, an index menu can be added (set option `vhdl-index-menu' to non-nil) or made accessible as a mouse menu (e.g. add \"(global-set-key '[S-down-mouse-3] 'imenu)\" to your start-up file) for browsing the file contents (is not populated if buffer is larger than `font-lock-maximum-size'). Also, a source file menu can be added (set option `vhdl-source-file-menu' to non-nil) for browsing the current directory for VHDL source files. VHDL STANDARDS: The VHDL standards to be used are specified in option `vhdl-standard'. Available standards are: VHDL'87/'93, VHDL-AMS, and Math Packages. KEYWORD CASE: Lower and upper case for keywords and standardized types, attributes, and enumeration values is supported. If the option `vhdl-upper-case-keywords' is set to non-nil, keywords can be typed in lower case and are converted into upper case automatically (not for types, attributes, and enumeration values). The case of keywords, types, attributes,and enumeration values can be fixed for an entire region (menu) or buffer (`C-c C-x C-c') according to the options `vhdl-upper-case-{keywords,types,attributes,enum-values}'. HIGHLIGHTING (fontification): Keywords and standardized types, attributes, enumeration values, and function names (controlled by option `vhdl-highlight-keywords'), as well as comments, strings, and template prompts are highlighted using different colors. Unit, subprogram, signal, variable, constant, parameter and generic/port names in declarations as well as labels are highlighted if option `vhdl-highlight-names' is non-nil. Additional reserved words or words with a forbidden syntax (e.g. words that should be avoided) can be specified in option `vhdl-forbidden-words' or `vhdl-forbidden-syntax' and be highlighted in a warning color (option `vhdl-highlight-forbidden-words'). Verilog keywords are highlighted as forbidden words if option `vhdl-highlight-verilog-keywords' is non-nil. Words with special syntax can be highlighted by specifying their syntax and color in option `vhdl-special-syntax-alist' and by setting option `vhdl-highlight-special-words' to non-nil. This allows to establish some naming conventions (e.g. to distinguish different kinds of signals or other objects by using name suffices) and to support them visually. Option `vhdl-highlight-case-sensitive' can be set to non-nil in order to support case-sensitive highlighting. However, keywords are then only highlighted if written in lower case. Code between \"translate_off\" and \"translate_on\" pragmas is highlighted using a different background color if option `vhdl-highlight-translate-off' is non-nil. For documentation and customization of the used colors see customization group `vhdl-highlight-faces' (`M-x customize-group'). For highlighting of matching parenthesis, see customization group `paren-showing'. Automatic buffer highlighting is turned on/off by option `global-font-lock-mode' (`font-lock-auto-fontify' in XEmacs). USER MODELS: VHDL models (templates) can be specified by the user and made accessible in the menu, through key bindings (`C-c C-m ...'), or by keyword electrification. See option `vhdl-model-alist'. HIDE/SHOW: The code of blocks, processes, subprograms, component declarations and instantiations, generic/port clauses, and configuration declarations can be hidden using the `Hide/Show' menu or by pressing `S-mouse-2' within the code (see customization group `vhdl-menu'). XEmacs: limited functionality due to old `hideshow.el' package. CODE UPDATING: - Sensitivity List: `C-c C-u C-s' updates the sensitivity list of the current process, `C-c C-u M-s' of all processes in the current buffer. Limitations: - Only declared local signals (ports, signals declared in architecture and blocks) are automatically inserted. - Global signals declared in packages are not automatically inserted. Insert them once manually (will be kept afterwards). - Out parameters of procedures are considered to be read. Use option `vhdl-entity-file-name' to specify the entity file name (used to obtain the port names). CODE FIXING: `C-c C-x C-p' fixes the closing parenthesis of a generic/port clause (e.g. if the closing parenthesis is on the wrong line or is missing). PRINTING: Postscript printing with different faces (an optimized set of faces is used if `vhdl-print-customize-faces' is non-nil) or colors (if `ps-print-color-p' is non-nil) is possible using the standard Emacs postscript printing commands. Option `vhdl-print-two-column' defines appropriate default settings for nice landscape two-column printing. The paper format can be set by option `ps-paper-type'. Do not forget to switch `ps-print-color-p' to nil for printing on black-and-white printers. OPTIONS: User options allow customization of VHDL Mode. All options are accessible from the \"Options\" menu entry. Simple options (switches and choices) can directly be changed, while for complex options a customization buffer is opened. Changed options can be saved for future sessions using the \"Save Options\" menu entry. Options and their detailed descriptions can also be accessed by using the \"Customize\" menu entry or the command `M-x customize-option' (`M-x customize-group' for groups). Some customizations only take effect after some action (read the NOTE in the option documentation). Customization can also be done globally (i.e. site-wide, read the INSTALL file). Not all options are described in this documentation, so go and see what other useful user options there are (`M-x vhdl-customize' or menu)! FILE EXTENSIONS: As default, files with extensions \".vhd\" and \".vhdl\" are automatically recognized as VHDL source files. To add an extension \".xxx\", add the following line to your Emacs start-up file (`.emacs'): (setq auto-mode-alist (cons '(\"\\\\.xxx\\\\'\" . vhdl-mode) auto-mode-alist)) HINTS: - To start Emacs with open VHDL hierarchy browser without having to load a VHDL file first, use the command: emacs -l vhdl-mode -f speedbar-frame-mode - Type `C-g C-g' to interrupt long operations or if Emacs hangs. - Some features only work on properly indented code. RELEASE NOTES: See also the release notes (menu) for added features in new releases. Maintenance: ------------ To submit a bug report, enter `M-x vhdl-submit-bug-report' within VHDL Mode. Add a description of the problem and include a reproducible test case. Questions and enhancement requests can be sent to <reto@gnu.org>. The `vhdl-mode-announce' mailing list informs about new VHDL Mode releases. The `vhdl-mode-victims' mailing list informs about new VHDL Mode beta releases. You are kindly invited to participate in beta testing. Subscribe to above mailing lists by sending an email to <reto@gnu.org>. VHDL Mode is officially distributed at URL `http://opensource.ethz.ch/emacs/vhdl-mode.html' where the latest version can be found. Known problems: --------------- - Indentation bug in simultaneous if- and case-statements (VHDL-AMS). - XEmacs: Incorrect start-up when automatically opening speedbar. - XEmacs: Indentation in XEmacs 21.4 (and higher). The VHDL Mode Authors Reto Zimmermann and Rod Whitby Key bindings: ------------- \\{vhdl-mode-map} \(fn)" t nil) ;;;*** ;;;### (autoloads (vi-mode) "vi" "emulation/vi.el" (19259 35432)) ;;; Generated autoloads from emulation/vi.el (autoload 'vi-mode "vi" "\ Major mode that acts like the `vi' editor. The purpose of this mode is to provide you the combined power of vi (namely, the \"cross product\" effect of commands and repeat last changes) and Emacs. This command redefines nearly all keys to look like vi commands. It records the previous major mode, and any vi command for input \(`i', `a', `s', etc.) switches back to that mode. Thus, ordinary Emacs (in whatever major mode you had been using) is \"input\" mode as far as vi is concerned. To get back into vi from \"input\" mode, you must issue this command again. Therefore, it is recommended that you assign it to a key. Major differences between this mode and real vi : * Limitations and unsupported features - Search patterns with line offset (e.g. /pat/+3 or /pat/z.) are not supported. - Ex commands are not implemented; try ':' to get some hints. - No line undo (i.e. the 'U' command), but multi-undo is a standard feature. * Modifications - The stopping positions for some point motion commands (word boundary, pattern search) are slightly different from standard 'vi'. Also, no automatic wrap around at end of buffer for pattern searching. - Since changes are done in two steps (deletion then insertion), you need to undo twice to completely undo a change command. But this is not needed for undoing a repeated change command. - No need to set/unset 'magic', to search for a string with regular expr in it just put a prefix arg for the search commands. Replace cmds too. - ^R is bound to incremental backward search, so use ^L to redraw screen. * Extensions - Some standard (or modified) Emacs commands were integrated, such as incremental search, query replace, transpose objects, and keyboard macros. - In command state, ^X links to the 'ctl-x-map', and ESC can be linked to esc-map or set undefined. These can give you the full power of Emacs. - See vi-com-map for those keys that are extensions to standard vi, e.g. `vi-name-last-change-or-macro', `vi-verify-spelling', `vi-locate-def', `vi-mark-region', and 'vi-quote-words'. Some of them are quite handy. - Use \\[vi-switch-mode] to switch among different modes quickly. Syntax table and abbrevs while in vi mode remain as they were in Emacs. \(fn)" t nil) ;;;*** ;;;### (autoloads (viqr-pre-write-conversion viqr-post-read-conversion ;;;;;; viet-encode-viqr-buffer viet-encode-viqr-region viet-decode-viqr-buffer ;;;;;; viet-decode-viqr-region viet-encode-viscii-char) "viet-util" ;;;;;; "language/viet-util.el" (19259 35432)) ;;; Generated autoloads from language/viet-util.el (autoload 'viet-encode-viscii-char "viet-util" "\ Return VISCII character code of CHAR if appropriate. \(fn CHAR)" nil nil) (autoload 'viet-decode-viqr-region "viet-util" "\ Convert `VIQR' mnemonics of the current region to Vietnamese characters. When called from a program, expects two arguments, positions (integers or markers) specifying the stretch of the region. \(fn FROM TO)" t nil) (autoload 'viet-decode-viqr-buffer "viet-util" "\ Convert `VIQR' mnemonics of the current buffer to Vietnamese characters. \(fn)" t nil) (autoload 'viet-encode-viqr-region "viet-util" "\ Convert Vietnamese characters of the current region to `VIQR' mnemonics. When called from a program, expects two arguments, positions (integers or markers) specifying the stretch of the region. \(fn FROM TO)" t nil) (autoload 'viet-encode-viqr-buffer "viet-util" "\ Convert Vietnamese characters of the current buffer to `VIQR' mnemonics. \(fn)" t nil) (autoload 'viqr-post-read-conversion "viet-util" "\ Not documented \(fn LEN)" nil nil) (autoload 'viqr-pre-write-conversion "viet-util" "\ Not documented \(fn FROM TO)" nil nil) ;;;*** ;;;### (autoloads (View-exit-and-edit view-mode-enter view-return-to-alist-update ;;;;;; view-mode view-buffer-other-frame view-buffer-other-window ;;;;;; view-buffer view-file-other-frame view-file-other-window ;;;;;; view-file kill-buffer-if-not-modified view-remove-frame-by-deleting) ;;;;;; "view" "view.el" (19259 35432)) ;;; Generated autoloads from view.el (defvar view-remove-frame-by-deleting t "\ Determine how View mode removes a frame no longer needed. If nil, make an icon of the frame. If non-nil, delete the frame.") (custom-autoload 'view-remove-frame-by-deleting "view" t) (defvar view-mode nil "\ Non-nil if View mode is enabled. Don't change this variable directly, you must change it by one of the functions that enable or disable view mode.") (make-variable-buffer-local 'view-mode) (autoload 'kill-buffer-if-not-modified "view" "\ Like `kill-buffer', but does nothing if the buffer is modified. \(fn BUF)" nil nil) (autoload 'view-file "view" "\ View FILE in View mode, returning to previous buffer when done. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For a list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. \(fn FILE)" t nil) (autoload 'view-file-other-window "view" "\ View FILE in View mode in another window. When done, return that window to its previous buffer, and kill the buffer visiting FILE if unmodified and if it wasn't visited before. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For a list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. \(fn FILE)" t nil) (autoload 'view-file-other-frame "view" "\ View FILE in View mode in another frame. When done, kill the buffer visiting FILE if unmodified and if it wasn't visited before; also, maybe delete other frame and/or return to previous buffer. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For a list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. \(fn FILE)" t nil) (autoload 'view-buffer "view" "\ View BUFFER in View mode, returning to previous buffer when done. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For a list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. Optional argument EXIT-ACTION is either nil or a function with buffer as argument. This function is called when finished viewing buffer. Use this argument instead of explicitly setting `view-exit-action'. Do not set EXIT-ACTION to `kill-buffer' when BUFFER visits a file: Users may suspend viewing in order to modify the buffer. Exiting View mode will then discard the user's edits. Setting EXIT-ACTION to `kill-buffer-if-not-modified' avoids this. \(fn BUFFER &optional EXIT-ACTION)" t nil) (autoload 'view-buffer-other-window "view" "\ View BUFFER in View mode in another window. Return to previous buffer when done, unless optional NOT-RETURN is non-nil. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For a list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. Optional argument EXIT-ACTION is either nil or a function with buffer as argument. This function is called when finished viewing buffer. Use this argument instead of explicitly setting `view-exit-action'. \(fn BUFFER &optional NOT-RETURN EXIT-ACTION)" t nil) (autoload 'view-buffer-other-frame "view" "\ View BUFFER in View mode in another frame. Return to previous buffer when done, unless optional NOT-RETURN is non-nil. Emacs commands editing the buffer contents are not available; instead, a special set of commands (mostly letters and punctuation) are defined for moving around in the buffer. Space scrolls forward, Delete scrolls backward. For a list of all View commands, type H or h while viewing. This command runs the normal hook `view-mode-hook'. Optional argument EXIT-ACTION is either nil or a function with buffer as argument. This function is called when finished viewing buffer. Use this argument instead of explicitly setting `view-exit-action'. \(fn BUFFER &optional NOT-RETURN EXIT-ACTION)" t nil) (autoload 'view-mode "view" "\ Toggle View mode, a minor mode for viewing text but not editing it. With prefix argument ARG, turn View mode on if ARG is positive, otherwise turn it off. Emacs commands that do not change the buffer contents are available as usual. Kill commands insert text in kill buffers but do not delete. Other commands \(among them most letters and punctuation) beep and tell that the buffer is read-only. \\<view-mode-map> The following additional commands are provided. Most commands take prefix arguments. Page commands default to \"page size\" lines which is almost a whole window full, or number of lines set by \\[View-scroll-page-forward-set-page-size] or \\[View-scroll-page-backward-set-page-size]. Half page commands default to and set \"half page size\" lines which initially is half a window full. Search commands default to a repeat count of one. H, h, ? This message. Digits provide prefix arguments. \\[negative-argument] negative prefix argument. \\[beginning-of-buffer] move to the beginning of buffer. > move to the end of buffer. \\[View-scroll-to-buffer-end] scroll so that buffer end is at last line of window. SPC scroll forward \"page size\" lines. With prefix scroll forward prefix lines. DEL scroll backward \"page size\" lines. With prefix scroll backward prefix lines. \\[View-scroll-page-forward-set-page-size] like \\[View-scroll-page-forward] but with prefix sets \"page size\" to prefix. \\[View-scroll-page-backward-set-page-size] like \\[View-scroll-page-backward] but with prefix sets \"page size\" to prefix. \\[View-scroll-half-page-forward] scroll forward \"half page size\" lines. With prefix, sets \"half page size\" to prefix lines and scrolls forward that much. \\[View-scroll-half-page-backward] scroll backward \"half page size\" lines. With prefix, sets \"half page size\" to prefix lines and scrolls backward that much. RET, LFD scroll forward one line. With prefix scroll forward prefix line(s). y scroll backward one line. With prefix scroll backward prefix line(s). \\[View-revert-buffer-scroll-page-forward] revert-buffer if necessary and scroll forward. Use this to view a changing file. \\[what-line] prints the current line number. \\[View-goto-percent] goes prefix argument (default 100) percent into buffer. \\[View-goto-line] goes to line given by prefix argument (default first line). . set the mark. x exchanges point and mark. \\[View-back-to-mark] return to mark and pops mark ring. Mark ring is pushed at start of every successful search and when jump to line occurs. The mark is set on jump to buffer start or end. \\[point-to-register] save current position in character register. ' go to position saved in character register. s do forward incremental search. r do reverse incremental search. \\[View-search-regexp-forward] searches forward for regular expression, starting after current page. ! and @ have a special meaning at the beginning of the regexp. ! means search for a line with no match for regexp. @ means start search at beginning (end for backward search) of buffer. \\ searches backward for regular expression, starting before current page. \\[View-search-last-regexp-forward] searches forward for last regular expression. p searches backward for last regular expression. \\[View-quit] quit View mode, restoring this window and buffer to previous state. \\[View-quit] is the normal way to leave view mode. \\[View-exit] exit View mode but stay in current buffer. Use this if you started viewing a buffer (file) and find out you want to edit it. This command restores the previous read-only status of the buffer. \\[View-exit-and-edit] exit View mode, and make the current buffer editable even if it was not editable before entry to View mode. \\[View-quit-all] quit View mode, restoring all windows to previous state. \\[View-leave] quit View mode and maybe switch buffers, but don't kill this buffer. \\[View-kill-and-leave] quit View mode, kill current buffer and go back to other buffer. The effect of \\[View-leave], \\[View-quit] and \\[View-kill-and-leave] depends on how view-mode was entered. If it was entered by view-file, view-file-other-window, view-file-other-frame, or \\[dired-view-file] (\\[view-file], \\[view-file-other-window], \\[view-file-other-frame], or the Dired mode v command), then \\[View-quit] will try to kill the current buffer. If view-mode was entered from another buffer, by \\[view-buffer], \\[view-buffer-other-window], \\[view-buffer-other frame], \\[view-file], \\[view-file-other-window], or \\[view-file-other-frame], then \\[View-leave], \\[View-quit] and \\[View-kill-and-leave] will return to that buffer. Entry to view-mode runs the normal hook `view-mode-hook'. \(fn &optional ARG)" t nil) (autoload 'view-return-to-alist-update "view" "\ Update `view-return-to-alist' of buffer BUFFER. Remove from `view-return-to-alist' all entries referencing dead windows. Optional argument ITEM non-nil means add ITEM to `view-return-to-alist' after purging. For a decsription of items that can be added see the RETURN-TO-ALIST argument of the function `view-mode-exit'. If `view-return-to-alist' contains an entry for the selected window, purge that entry from `view-return-to-alist' before adding ITEM. \(fn BUFFER &optional ITEM)" nil nil) (autoload 'view-mode-enter "view" "\ Enter View mode and set up exit from view mode depending on optional arguments. RETURN-TO non-nil means add RETURN-TO as an element to the buffer local alist `view-return-to-alist'. Save EXIT-ACTION in buffer local variable `view-exit-action'. It should be either nil or a function that takes a buffer as argument. This function will be called by `view-mode-exit'. RETURN-TO is either nil, meaning do nothing when exiting view mode, or must have the format (WINDOW OLD-WINDOW . OLD-BUF-INFO). WINDOW is the window used for viewing. OLD-WINDOW is nil or the window to select after viewing. OLD-BUF-INFO tells what to do with WINDOW when exiting. It is one of: 1) nil Do nothing. 2) t Delete WINDOW or, if it is the only window and `view-remove-frame-by-deleting' is non-nil, its frame. 3) (OLD-BUFF START POINT) Display buffer OLD-BUFF with displayed text starting at START and point at POINT in WINDOW. 4) quit-window Do `quit-window' in WINDOW. 5) keep-frame Like case 2) but do not delete the frame. For a list of all View commands, type H or h while viewing. This function runs the normal hook `view-mode-hook'. \(fn &optional RETURN-TO EXIT-ACTION)" nil nil) (autoload 'View-exit-and-edit "view" "\ Exit View mode and make the current buffer editable. \(fn)" t nil) ;;;*** ;;;### (autoloads (vip-mode vip-setup) "vip" "emulation/vip.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from emulation/vip.el (autoload 'vip-setup "vip" "\ Set up bindings for C-x 7 and C-z that are useful for VIP users. \(fn)" nil nil) (autoload 'vip-mode "vip" "\ Turn on VIP emulation of VI. \(fn)" t nil) ;;;*** ;;;### (autoloads (viper-mode toggle-viper-mode) "viper" "emulation/viper.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from emulation/viper.el (autoload 'toggle-viper-mode "viper" "\ Toggle Viper on/off. If Viper is enabled, turn it off. Otherwise, turn it on. \(fn)" t nil) (autoload 'viper-mode "viper" "\ Turn on Viper emulation of Vi in Emacs. See Info node `(viper)Top'. \(fn)" t nil) ;;;*** ;;;### (autoloads (warn lwarn display-warning) "warnings" "emacs-lisp/warnings.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from emacs-lisp/warnings.el (defvar warning-prefix-function nil "\ Function to generate warning prefixes. This function, if non-nil, is called with two arguments, the severity level and its entry in `warning-levels', and should return the entry that should actually be used. The warnings buffer is current when this function is called and the function can insert text in it. This text becomes the beginning of the warning.") (defvar warning-series nil "\ Non-nil means treat multiple `display-warning' calls as a series. A marker indicates a position in the warnings buffer which is the start of the current series; it means that additional warnings in the same buffer should not move point. t means the next warning begins a series (and stores a marker here). A symbol with a function definition is like t, except also call that function before the next warning.") (defvar warning-fill-prefix nil "\ Non-nil means fill each warning text using this string as `fill-prefix'.") (defvar warning-type-format (purecopy " (%s)") "\ Format for displaying the warning type in the warning message. The result of formatting the type this way gets included in the message under the control of the string in `warning-levels'.") (autoload 'display-warning "warnings" "\ Display a warning message, MESSAGE. TYPE is the warning type: either a custom group name (a symbol), or a list of symbols whose first element is a custom group name. \(The rest of the symbols represent subcategories, for warning purposes only, and you can use whatever symbols you like.) LEVEL should be either :debug, :warning, :error, or :emergency \(but see `warning-minimum-level' and `warning-minimum-log-level'). Default is :warning. :emergency -- a problem that will seriously impair Emacs operation soon if you do not attend to it promptly. :error -- data or circumstances that are inherently wrong. :warning -- data or circumstances that are not inherently wrong, but raise suspicion of a possible problem. :debug -- info for debugging only. BUFFER-NAME, if specified, is the name of the buffer for logging the warning. By default, it is `*Warnings*'. If this function has to create the buffer, it disables undo in the buffer. See the `warnings' custom group for user customization features. See also `warning-series', `warning-prefix-function' and `warning-fill-prefix' for additional programming features. \(fn TYPE MESSAGE &optional LEVEL BUFFER-NAME)" nil nil) (autoload 'lwarn "warnings" "\ Display a warning message made from (format MESSAGE ARGS...). Aside from generating the message with `format', this is equivalent to `display-warning'. TYPE is the warning type: either a custom group name (a symbol), or a list of symbols whose first element is a custom group name. \(The rest of the symbols represent subcategories and can be whatever you like.) LEVEL should be either :debug, :warning, :error, or :emergency \(but see `warning-minimum-level' and `warning-minimum-log-level'). :emergency -- a problem that will seriously impair Emacs operation soon if you do not attend to it promptly. :error -- invalid data or circumstances. :warning -- suspicious data or circumstances. :debug -- info for debugging only. \(fn TYPE LEVEL MESSAGE &rest ARGS)" nil nil) (autoload 'warn "warnings" "\ Display a warning message made from (format MESSAGE ARGS...). Aside from generating the message with `format', this is equivalent to `display-warning', using `emacs' as the type and `:warning' as the level. \(fn MESSAGE &rest ARGS)" nil nil) ;;;*** ;;;### (autoloads (wdired-change-to-wdired-mode) "wdired" "wdired.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from wdired.el (autoload 'wdired-change-to-wdired-mode "wdired" "\ Put a dired buffer in a mode in which filenames are editable. \\<wdired-mode-map> This mode allows the user to change the names of the files, and after typing \\[wdired-finish-edit] Emacs renames the files and directories in disk. See `wdired-mode'. \(fn)" t nil) ;;;*** ;;;### (autoloads (webjump) "webjump" "net/webjump.el" (19259 35432)) ;;; Generated autoloads from net/webjump.el (autoload 'webjump "webjump" "\ Jumps to a Web site from a programmable hotlist. See the documentation for the `webjump-sites' variable for how to customize the hotlist. Please submit bug reports and other feedback to the author, Neil W. Van Dyke <nwv@acm.org>. \(fn)" t nil) ;;;*** ;;;### (autoloads (which-function-mode) "which-func" "progmodes/which-func.el" ;;;;;; (19259 35432)) ;;; Generated autoloads from progmodes/which-func.el (put 'which-func-format 'risky-local-variable t) (put 'which-func-current 'risky-local-variable t) (defalias 'which-func-mode 'which-function-mode) (defvar which-function-mode nil "\ Non-nil if Which-Function mode is enabled. See the command `which-function-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `which-function-mode'.") (custom-autoload 'which-function-mode "which-func" nil) (autoload 'which-function-mode "which-func" "\ Toggle Which Function mode, globally. When Which Function mode is enabled, the current function name is continuously displayed in the mode line, in certain major modes. With prefix ARG, turn Which Function mode on if arg is positive, and off otherwise. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (whitespace-report-region whitespace-report whitespace-cleanup-region ;;;;;; whitespace-cleanup global-whitespace-toggle-options whitespace-toggle-options ;;;;;; global-whitespace-newline-mode global-whitespace-mode whitespace-newline-mode ;;;;;; whitespace-mode) "whitespace" "whitespace.el" (19259 35432)) ;;; Generated autoloads from whitespace.el (autoload 'whitespace-mode "whitespace" "\ Toggle whitespace minor mode visualization (\"ws\" on modeline). If ARG is null, toggle whitespace visualization. If ARG is a number greater than zero, turn on visualization; otherwise, turn off visualization. See also `whitespace-style', `whitespace-newline' and `whitespace-display-mappings'. \(fn &optional ARG)" t nil) (autoload 'whitespace-newline-mode "whitespace" "\ Toggle NEWLINE minor mode visualization (\"nl\" on modeline). If ARG is null, toggle NEWLINE visualization. If ARG is a number greater than zero, turn on visualization; otherwise, turn off visualization. Use `whitespace-newline-mode' only for NEWLINE visualization exclusively. For other visualizations, including NEWLINE visualization together with (HARD) SPACEs and/or TABs, please, use `whitespace-mode'. See also `whitespace-newline' and `whitespace-display-mappings'. \(fn &optional ARG)" t nil) (defvar global-whitespace-mode nil "\ Non-nil if Global-Whitespace mode is enabled. See the command `global-whitespace-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-whitespace-mode'.") (custom-autoload 'global-whitespace-mode "whitespace" nil) (autoload 'global-whitespace-mode "whitespace" "\ Toggle whitespace global minor mode visualization (\"WS\" on modeline). If ARG is null, toggle whitespace visualization. If ARG is a number greater than zero, turn on visualization; otherwise, turn off visualization. See also `whitespace-style', `whitespace-newline' and `whitespace-display-mappings'. \(fn &optional ARG)" t nil) (defvar global-whitespace-newline-mode nil "\ Non-nil if Global-Whitespace-Newline mode is enabled. See the command `global-whitespace-newline-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `global-whitespace-newline-mode'.") (custom-autoload 'global-whitespace-newline-mode "whitespace" nil) (autoload 'global-whitespace-newline-mode "whitespace" "\ Toggle NEWLINE global minor mode visualization (\"NL\" on modeline). If ARG is null, toggle NEWLINE visualization. If ARG is a number greater than zero, turn on visualization; otherwise, turn off visualization. Use `global-whitespace-newline-mode' only for NEWLINE visualization exclusively. For other visualizations, including NEWLINE visualization together with (HARD) SPACEs and/or TABs, please, use `global-whitespace-mode'. See also `whitespace-newline' and `whitespace-display-mappings'. \(fn &optional ARG)" t nil) (autoload 'whitespace-toggle-options "whitespace" "\ Toggle local `whitespace-mode' options. If local whitespace-mode is off, toggle the option given by ARG and turn on local whitespace-mode. If local whitespace-mode is on, toggle the option given by ARG and restart local whitespace-mode. Interactively, it reads one of the following chars: CHAR MEANING (VIA FACES) t toggle TAB visualization s toggle SPACE and HARD SPACE visualization r toggle trailing blanks visualization l toggle \"long lines\" visualization L toggle \"long lines\" tail visualization n toggle NEWLINE visualization e toggle empty line at bob and/or eob visualization C-i toggle indentation SPACEs visualization (via `indent-tabs-mode') I toggle indentation SPACEs visualization i toggle indentation TABs visualization C-a toggle SPACEs after TAB visualization (via `indent-tabs-mode') A toggle SPACEs after TAB: SPACEs visualization a toggle SPACEs after TAB: TABs visualization C-b toggle SPACEs before TAB visualization (via `indent-tabs-mode') B toggle SPACEs before TAB: SPACEs visualization b toggle SPACEs before TAB: TABs visualization (VIA DISPLAY TABLE) T toggle TAB visualization S toggle SPACEs before TAB visualization N toggle NEWLINE visualization x restore `whitespace-style' value ? display brief help Non-interactively, ARG should be a symbol or a list of symbols. The valid symbols are: tabs toggle TAB visualization spaces toggle SPACE and HARD SPACE visualization trailing toggle trailing blanks visualization lines toggle \"long lines\" visualization lines-tail toggle \"long lines\" tail visualization newline toggle NEWLINE visualization empty toggle empty line at bob and/or eob visualization indentation toggle indentation SPACEs visualization indentation::tab toggle indentation SPACEs visualization indentation::space toggle indentation TABs visualization space-after-tab toggle SPACEs after TAB visualization space-after-tab::tab toggle SPACEs after TAB: SPACEs visualization space-after-tab::space toggle SPACEs after TAB: TABs visualization space-before-tab toggle SPACEs before TAB visualization space-before-tab::tab toggle SPACEs before TAB: SPACEs visualization space-before-tab::space toggle SPACEs before TAB: TABs visualization tab-mark toggle TAB visualization space-mark toggle SPACEs before TAB visualization newline-mark toggle NEWLINE visualization whitespace-style restore `whitespace-style' value See `whitespace-style' and `indent-tabs-mode' for documentation. \(fn ARG)" t nil) (autoload 'global-whitespace-toggle-options "whitespace" "\ Toggle global `whitespace-mode' options. If global whitespace-mode is off, toggle the option given by ARG and turn on global whitespace-mode. If global whitespace-mode is on, toggle the option given by ARG and restart global whitespace-mode. Interactively, it accepts one of the following chars: CHAR MEANING (VIA FACES) t toggle TAB visualization s toggle SPACE and HARD SPACE visualization r toggle trailing blanks visualization l toggle \"long lines\" visualization L toggle \"long lines\" tail visualization n toggle NEWLINE visualization e toggle empty line at bob and/or eob visualization C-i toggle indentation SPACEs visualization (via `indent-tabs-mode') I toggle indentation SPACEs visualization i toggle indentation TABs visualization C-a toggle SPACEs after TAB visualization (via `indent-tabs-mode') A toggle SPACEs after TAB: SPACEs visualization a toggle SPACEs after TAB: TABs visualization C-b toggle SPACEs before TAB visualization (via `indent-tabs-mode') B toggle SPACEs before TAB: SPACEs visualization b toggle SPACEs before TAB: TABs visualization (VIA DISPLAY TABLE) T toggle TAB visualization S toggle SPACEs before TAB visualization N toggle NEWLINE visualization x restore `whitespace-style' value ? display brief help Non-interactively, ARG should be a symbol or a list of symbols. The valid symbols are: tabs toggle TAB visualization spaces toggle SPACE and HARD SPACE visualization trailing toggle trailing blanks visualization lines toggle \"long lines\" visualization lines-tail toggle \"long lines\" tail visualization newline toggle NEWLINE visualization empty toggle empty line at bob and/or eob visualization indentation toggle indentation SPACEs visualization indentation::tab toggle indentation SPACEs visualization indentation::space toggle indentation TABs visualization space-after-tab toggle SPACEs after TAB visualization space-after-tab::tab toggle SPACEs after TAB: SPACEs visualization space-after-tab::space toggle SPACEs after TAB: TABs visualization space-before-tab toggle SPACEs before TAB visualization space-before-tab::tab toggle SPACEs before TAB: SPACEs visualization space-before-tab::space toggle SPACEs before TAB: TABs visualization tab-mark toggle TAB visualization space-mark toggle SPACEs before TAB visualization newline-mark toggle NEWLINE visualization whitespace-style restore `whitespace-style' value See `whitespace-style' and `indent-tabs-mode' for documentation. \(fn ARG)" t nil) (autoload 'whitespace-cleanup "whitespace" "\ Cleanup some blank problems in all buffer or at region. It usually applies to the whole buffer, but in transient mark mode when the mark is active, it applies to the region. It also applies to the region when it is not in transient mark mode, the mark is active and \\[universal-argument] was pressed just before calling `whitespace-cleanup' interactively. See also `whitespace-cleanup-region'. The problems cleaned up are: 1. empty lines at beginning of buffer. 2. empty lines at end of buffer. If `whitespace-style' includes the value `empty', remove all empty lines at beginning and/or end of buffer. 3. 8 or more SPACEs at beginning of line. If `whitespace-style' includes the value `indentation': replace 8 or more SPACEs at beginning of line by TABs, if `indent-tabs-mode' is non-nil; otherwise, replace TABs by SPACEs. If `whitespace-style' includes the value `indentation::tab', replace 8 or more SPACEs at beginning of line by TABs. If `whitespace-style' includes the value `indentation::space', replace TABs by SPACEs. 4. SPACEs before TAB. If `whitespace-style' includes the value `space-before-tab': replace SPACEs by TABs, if `indent-tabs-mode' is non-nil; otherwise, replace TABs by SPACEs. If `whitespace-style' includes the value `space-before-tab::tab', replace SPACEs by TABs. If `whitespace-style' includes the value `space-before-tab::space', replace TABs by SPACEs. 5. SPACEs or TABs at end of line. If `whitespace-style' includes the value `trailing', remove all SPACEs or TABs at end of line. 6. 8 or more SPACEs after TAB. If `whitespace-style' includes the value `space-after-tab': replace SPACEs by TABs, if `indent-tabs-mode' is non-nil; otherwise, replace TABs by SPACEs. If `whitespace-style' includes the value `space-after-tab::tab', replace SPACEs by TABs. If `whitespace-style' includes the value `space-after-tab::space', replace TABs by SPACEs. See `whitespace-style', `indent-tabs-mode' and `tab-width' for documentation. \(fn)" t nil) (autoload 'whitespace-cleanup-region "whitespace" "\ Cleanup some blank problems at region. The problems cleaned up are: 1. 8 or more SPACEs at beginning of line. If `whitespace-style' includes the value `indentation': replace 8 or more SPACEs at beginning of line by TABs, if `indent-tabs-mode' is non-nil; otherwise, replace TABs by SPACEs. If `whitespace-style' includes the value `indentation::tab', replace 8 or more SPACEs at beginning of line by TABs. If `whitespace-style' includes the value `indentation::space', replace TABs by SPACEs. 2. SPACEs before TAB. If `whitespace-style' includes the value `space-before-tab': replace SPACEs by TABs, if `indent-tabs-mode' is non-nil; otherwise, replace TABs by SPACEs. If `whitespace-style' includes the value `space-before-tab::tab', replace SPACEs by TABs. If `whitespace-style' includes the value `space-before-tab::space', replace TABs by SPACEs. 3. SPACEs or TABs at end of line. If `whitespace-style' includes the value `trailing', remove all SPACEs or TABs at end of line. 4. 8 or more SPACEs after TAB. If `whitespace-style' includes the value `space-after-tab': replace SPACEs by TABs, if `indent-tabs-mode' is non-nil; otherwise, replace TABs by SPACEs. If `whitespace-style' includes the value `space-after-tab::tab', replace SPACEs by TABs. If `whitespace-style' includes the value `space-after-tab::space', replace TABs by SPACEs. See `whitespace-style', `indent-tabs-mode' and `tab-width' for documentation. \(fn START END)" t nil) (autoload 'whitespace-report "whitespace" "\ Report some whitespace problems in buffer. Return nil if there is no whitespace problem; otherwise, return non-nil. If FORCE is non-nil or \\[universal-argument] was pressed just before calling `whitespace-report' interactively, it forces `whitespace-style' to have: empty trailing indentation space-before-tab space-after-tab If REPORT-IF-BOGUS is non-nil, it reports only when there are any whitespace problems in buffer. Report if some of the following whitespace problems exist: * If `indent-tabs-mode' is non-nil: empty 1. empty lines at beginning of buffer. empty 2. empty lines at end of buffer. trailing 3. SPACEs or TABs at end of line. indentation 4. 8 or more SPACEs at beginning of line. space-before-tab 5. SPACEs before TAB. space-after-tab 6. 8 or more SPACEs after TAB. * If `indent-tabs-mode' is nil: empty 1. empty lines at beginning of buffer. empty 2. empty lines at end of buffer. trailing 3. SPACEs or TABs at end of line. indentation 4. TABS at beginning of line. space-before-tab 5. SPACEs before TAB. space-after-tab 6. 8 or more SPACEs after TAB. See `whitespace-style' for documentation. See also `whitespace-cleanup' and `whitespace-cleanup-region' for cleaning up these problems. \(fn &optional FORCE REPORT-IF-BOGUS)" t nil) (autoload 'whitespace-report-region "whitespace" "\ Report some whitespace problems in a region. Return nil if there is no whitespace problem; otherwise, return non-nil. If FORCE is non-nil or \\[universal-argument] was pressed just before calling `whitespace-report-region' interactively, it forces `whitespace-style' to have: empty indentation space-before-tab trailing space-after-tab If REPORT-IF-BOGUS is non-nil, it reports only when there are any whitespace problems in buffer. Report if some of the following whitespace problems exist: * If `indent-tabs-mode' is non-nil: empty 1. empty lines at beginning of buffer. empty 2. empty lines at end of buffer. trailing 3. SPACEs or TABs at end of line. indentation 4. 8 or more SPACEs at beginning of line. space-before-tab 5. SPACEs before TAB. space-after-tab 6. 8 or more SPACEs after TAB. * If `indent-tabs-mode' is nil: empty 1. empty lines at beginning of buffer. empty 2. empty lines at end of buffer. trailing 3. SPACEs or TABs at end of line. indentation 4. TABS at beginning of line. space-before-tab 5. SPACEs before TAB. space-after-tab 6. 8 or more SPACEs after TAB. See `whitespace-style' for documentation. See also `whitespace-cleanup' and `whitespace-cleanup-region' for cleaning up these problems. \(fn START END &optional FORCE REPORT-IF-BOGUS)" t nil) ;;;*** ;;;### (autoloads (widget-minor-mode widget-browse-other-window widget-browse ;;;;;; widget-browse-at) "wid-browse" "wid-browse.el" (19259 35432)) ;;; Generated autoloads from wid-browse.el (autoload 'widget-browse-at "wid-browse" "\ Browse the widget under point. \(fn POS)" t nil) (autoload 'widget-browse "wid-browse" "\ Create a widget browser for WIDGET. \(fn WIDGET)" t nil) (autoload 'widget-browse-other-window "wid-browse" "\ Show widget browser for WIDGET in other window. \(fn &optional WIDGET)" t nil) (autoload 'widget-minor-mode "wid-browse" "\ Togle minor mode for traversing widgets. With arg, turn widget mode on if and only if arg is positive. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (widget-setup widget-insert widget-delete widget-create ;;;;;; widget-prompt-value widgetp) "wid-edit" "wid-edit.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from wid-edit.el (autoload 'widgetp "wid-edit" "\ Return non-nil if WIDGET is a widget. \(fn WIDGET)" nil nil) (autoload 'widget-prompt-value "wid-edit" "\ Prompt for a value matching WIDGET, using PROMPT. The current value is assumed to be VALUE, unless UNBOUND is non-nil. \(fn WIDGET PROMPT &optional VALUE UNBOUND)" nil nil) (autoload 'widget-create "wid-edit" "\ Create widget of TYPE. The optional ARGS are additional keyword arguments. \(fn TYPE &rest ARGS)" nil nil) (autoload 'widget-delete "wid-edit" "\ Delete WIDGET. \(fn WIDGET)" nil nil) (autoload 'widget-insert "wid-edit" "\ Call `insert' with ARGS even if surrounding text is read only. \(fn &rest ARGS)" nil nil) (defvar widget-keymap (let ((map (make-sparse-keymap))) (define-key map " " 'widget-forward) (define-key map " " 'widget-backward) (define-key map [(shift tab)] 'widget-backward) (put 'widget-backward :advertised-binding [(shift tab)]) (define-key map [backtab] 'widget-backward) (define-key map [down-mouse-2] 'widget-button-click) (define-key map [down-mouse-1] 'widget-button-click) (define-key map [(control 109)] 'widget-button-press) map) "\ Keymap containing useful binding for buffers containing widgets. Recommended as a parent keymap for modes using widgets.") (autoload 'widget-setup "wid-edit" "\ Setup current buffer so editing string widgets works. \(fn)" nil nil) ;;;*** ;;;### (autoloads (windmove-default-keybindings windmove-down windmove-right ;;;;;; windmove-up windmove-left) "windmove" "windmove.el" (19259 ;;;;;; 35432)) ;;; Generated autoloads from windmove.el (autoload 'windmove-left "windmove" "\ Select the window to the left of the current one. With no prefix argument, or with prefix argument equal to zero, \"left\" is relative to the position of point in the window; otherwise it is relative to the top edge (for positive ARG) or the bottom edge \(for negative ARG) of the current window. If no window is at the desired location, an error is signaled. \(fn &optional ARG)" t nil) (autoload 'windmove-up "windmove" "\ Select the window above the current one. With no prefix argument, or with prefix argument equal to zero, \"up\" is relative to the position of point in the window; otherwise it is relative to the left edge (for positive ARG) or the right edge (for negative ARG) of the current window. If no window is at the desired location, an error is signaled. \(fn &optional ARG)" t nil) (autoload 'windmove-right "windmove" "\ Select the window to the right of the current one. With no prefix argument, or with prefix argument equal to zero, \"right\" is relative to the position of point in the window; otherwise it is relative to the top edge (for positive ARG) or the bottom edge (for negative ARG) of the current window. If no window is at the desired location, an error is signaled. \(fn &optional ARG)" t nil) (autoload 'windmove-down "windmove" "\ Select the window below the current one. With no prefix argument, or with prefix argument equal to zero, \"down\" is relative to the position of point in the window; otherwise it is relative to the left edge (for positive ARG) or the right edge \(for negative ARG) of the current window. If no window is at the desired location, an error is signaled. \(fn &optional ARG)" t nil) (autoload 'windmove-default-keybindings "windmove" "\ Set up keybindings for `windmove'. Keybindings are of the form MODIFIER-{left,right,up,down}. Default MODIFIER is 'shift. \(fn &optional MODIFIER)" t nil) ;;;*** ;;;### (autoloads (winner-mode winner-mode) "winner" "winner.el" ;;;;;; (19259 35433)) ;;; Generated autoloads from winner.el (defvar winner-mode nil "\ Toggle Winner mode. Setting this variable directly does not take effect; use either \\[customize] or the function `winner-mode'.") (custom-autoload 'winner-mode "winner" nil) (autoload 'winner-mode "winner" "\ Toggle Winner mode. With arg, turn Winner mode on if and only if arg is positive. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (woman-find-file woman-dired-find-file woman woman-locale) ;;;;;; "woman" "woman.el" (19259 35433)) ;;; Generated autoloads from woman.el (defvar woman-locale nil "\ String specifying a manual page locale, or nil. If a manual page is available in the specified locale \(e.g. \"sv_SE.ISO8859-1\"), it will be offered in preference to the default version. Normally, `set-locale-environment' sets this at startup.") (custom-autoload 'woman-locale "woman" t) (autoload 'woman "woman" "\ Browse UN*X man page for TOPIC (Without using external Man program). The major browsing mode used is essentially the standard Man mode. Choose the filename for the man page using completion, based on the topic selected from the directories specified in `woman-manpath' and `woman-path'. The directory expansions and topics are cached for speed, but a non-nil interactive argument forces the caches to be updated (e.g. to re-interpret the current directory). Used non-interactively, arguments are optional: if given then TOPIC should be a topic string and non-nil RE-CACHE forces re-caching. \(fn &optional TOPIC RE-CACHE)" t nil) (autoload 'woman-dired-find-file "woman" "\ In dired, run the WoMan man-page browser on this file. \(fn)" t nil) (autoload 'woman-find-file "woman" "\ Find, decode and browse a specific UN*X man-page source file FILE-NAME. Use existing buffer if possible; reformat only if prefix arg given. When called interactively, optional argument REFORMAT forces reformatting of an existing WoMan buffer formatted earlier. No external programs are used, except that `gunzip' will be used to decompress the file if appropriate. See the documentation for the `woman' command for further details. \(fn FILE-NAME &optional REFORMAT)" t nil) ;;;*** ;;;### (autoloads (wordstar-mode) "ws-mode" "emulation/ws-mode.el" ;;;;;; (19259 35433)) ;;; Generated autoloads from emulation/ws-mode.el (autoload 'wordstar-mode "ws-mode" "\ Major mode with WordStar-like key bindings. BUGS: - Help menus with WordStar commands (C-j just calls help-for-help) are not implemented - Options for search and replace - Show markers (C-k h) is somewhat strange - Search and replace (C-q a) is only available in forward direction No key bindings beginning with ESC are installed, they will work Emacs-like. The key bindings are: C-a backward-word C-b fill-paragraph C-c scroll-up-line C-d forward-char C-e previous-line C-f forward-word C-g delete-char C-h backward-char C-i indent-for-tab-command C-j help-for-help C-k ordstar-C-k-map C-l ws-repeat-search C-n open-line C-p quoted-insert C-r scroll-down-line C-s backward-char C-t kill-word C-u keyboard-quit C-v overwrite-mode C-w scroll-down C-x next-line C-y kill-complete-line C-z scroll-up C-k 0 ws-set-marker-0 C-k 1 ws-set-marker-1 C-k 2 ws-set-marker-2 C-k 3 ws-set-marker-3 C-k 4 ws-set-marker-4 C-k 5 ws-set-marker-5 C-k 6 ws-set-marker-6 C-k 7 ws-set-marker-7 C-k 8 ws-set-marker-8 C-k 9 ws-set-marker-9 C-k b ws-begin-block C-k c ws-copy-block C-k d save-buffers-kill-emacs C-k f find-file C-k h ws-show-markers C-k i ws-indent-block C-k k ws-end-block C-k p ws-print-block C-k q kill-emacs C-k r insert-file C-k s save-some-buffers C-k t ws-mark-word C-k u ws-exdent-block C-k C-u keyboard-quit C-k v ws-move-block C-k w ws-write-block C-k x kill-emacs C-k y ws-delete-block C-o c wordstar-center-line C-o b switch-to-buffer C-o j justify-current-line C-o k kill-buffer C-o l list-buffers C-o m auto-fill-mode C-o r set-fill-column C-o C-u keyboard-quit C-o wd delete-other-windows C-o wh split-window-horizontally C-o wo other-window C-o wv split-window-vertically C-q 0 ws-find-marker-0 C-q 1 ws-find-marker-1 C-q 2 ws-find-marker-2 C-q 3 ws-find-marker-3 C-q 4 ws-find-marker-4 C-q 5 ws-find-marker-5 C-q 6 ws-find-marker-6 C-q 7 ws-find-marker-7 C-q 8 ws-find-marker-8 C-q 9 ws-find-marker-9 C-q a ws-query-replace C-q b ws-to-block-begin C-q c end-of-buffer C-q d end-of-line C-q f ws-search C-q k ws-to-block-end C-q l ws-undo C-q p ws-last-cursorp C-q r beginning-of-buffer C-q C-u keyboard-quit C-q w ws-last-error C-q y ws-kill-eol C-q DEL ws-kill-bol \(fn)" t nil) ;;;*** ;;;### (autoloads (xesam-search) "xesam" "net/xesam.el" (19259 35433)) ;;; Generated autoloads from net/xesam.el (autoload 'xesam-search "xesam" "\ Perform an interactive search. ENGINE is the Xesam search engine to be applied, it must be one of the entries of `xesam-search-engines'. QUERY is the search string in the Xesam user query language. If the search engine does not support the Xesam user query language, a Xesam fulltext search is applied. The default search engine is the first entry in `xesam-search-engines'. Example: (xesam-search (car (xesam-search-engines)) \"emacs\") \(fn ENGINE QUERY)" t nil) ;;;*** ;;;### (autoloads (xml-parse-region xml-parse-file) "xml" "xml.el" ;;;;;; (19259 35433)) ;;; Generated autoloads from xml.el (autoload 'xml-parse-file "xml" "\ Parse the well-formed XML file FILE. If FILE is already visited, use its buffer and don't kill it. Returns the top node with all its children. If PARSE-DTD is non-nil, the DTD is parsed rather than skipped. If PARSE-NS is non-nil, then QNAMES are expanded. \(fn FILE &optional PARSE-DTD PARSE-NS)" nil nil) (autoload 'xml-parse-region "xml" "\ Parse the region from BEG to END in BUFFER. If BUFFER is nil, it defaults to the current buffer. Returns the XML list for the region, or raises an error if the region is not well-formed XML. If PARSE-DTD is non-nil, the DTD is parsed rather than skipped, and returned as the first element of the list. If PARSE-NS is non-nil, then QNAMES are expanded. \(fn BEG END &optional BUFFER PARSE-DTD PARSE-NS)" nil nil) ;;;*** ;;;### (autoloads (xmltok-get-declared-encoding-position) "xmltok" ;;;;;; "nxml/xmltok.el" (19259 35433)) ;;; Generated autoloads from nxml/xmltok.el (autoload 'xmltok-get-declared-encoding-position "xmltok" "\ Return the position of the encoding in the XML declaration at point. If there is a well-formed XML declaration starting at point and it contains an encoding declaration, then return (START . END) where START and END are the positions of the start and the end of the encoding name; if there is no encoding declaration return the position where and encoding declaration could be inserted. If there is XML that is not well-formed that looks like an XML declaration, return nil. Otherwise, return t. If LIMIT is non-nil, then do not consider characters beyond LIMIT. \(fn &optional LIMIT)" nil nil) ;;;*** ;;;### (autoloads (xterm-mouse-mode) "xt-mouse" "xt-mouse.el" (19259 ;;;;;; 35433)) ;;; Generated autoloads from xt-mouse.el (defvar xterm-mouse-mode nil "\ Non-nil if Xterm-Mouse mode is enabled. See the command `xterm-mouse-mode' for a description of this minor mode. Setting this variable directly does not take effect; either customize it (see the info node `Easy Customization') or call the function `xterm-mouse-mode'.") (custom-autoload 'xterm-mouse-mode "xt-mouse" nil) (autoload 'xterm-mouse-mode "xt-mouse" "\ Toggle XTerm mouse mode. With prefix arg, turn XTerm mouse mode on if arg is positive, otherwise turn it off. Turn it on to use Emacs mouse commands, and off to use xterm mouse commands. This works in terminal emulators compatible with xterm. It only works for simple uses of the mouse. Basically, only non-modified single clicks are supported. When turned on, the normal xterm mouse functionality for such clicks is still available by holding down the SHIFT key while pressing the mouse button. \(fn &optional ARG)" t nil) ;;;*** ;;;### (autoloads (yenc-extract-filename yenc-decode-region) "yenc" ;;;;;; "gnus/yenc.el" (19259 35433)) ;;; Generated autoloads from gnus/yenc.el (autoload 'yenc-decode-region "yenc" "\ Yenc decode region between START and END using an internal decoder. \(fn START END)" t nil) (autoload 'yenc-extract-filename "yenc" "\ Extract file name from an yenc header. \(fn)" nil nil) ;;;*** ;;;### (autoloads (psychoanalyze-pinhead apropos-zippy insert-zippyism ;;;;;; yow) "yow" "play/yow.el" (19259 35433)) ;;; Generated autoloads from play/yow.el (autoload 'yow "yow" "\ Return or display a random Zippy quotation. With prefix arg, insert it. \(fn &optional INSERT DISPLAY)" t nil) (autoload 'insert-zippyism "yow" "\ Prompt with completion for a known Zippy quotation, and insert it at point. \(fn &optional ZIPPYISM)" t nil) (autoload 'apropos-zippy "yow" "\ Return a list of all Zippy quotes matching REGEXP. If called interactively, display a list of matches. \(fn REGEXP)" t nil) (autoload 'psychoanalyze-pinhead "yow" "\ Zippy goes to the analyst. \(fn)" t nil) ;;;*** ;;;### (autoloads (zone) "zone" "play/zone.el" (19259 35433)) ;;; Generated autoloads from play/zone.el (autoload 'zone "zone" "\ Zone out, completely. \(fn)" t nil) ;;;*** ;;;### (autoloads nil nil ("calc/calc-aent.el" "calc/calc-alg.el" ;;;;;; "calc/calc-arith.el" "calc/calc-bin.el" "calc/calc-comb.el" ;;;;;; "calc/calc-cplx.el" "calc/calc-embed.el" "calc/calc-ext.el" ;;;;;; "calc/calc-fin.el" "calc/calc-forms.el" "calc/calc-frac.el" ;;;;;; "calc/calc-funcs.el" "calc/calc-graph.el" "calc/calc-help.el" ;;;;;; "calc/calc-incom.el" "calc/calc-keypd.el" "calc/calc-lang.el" ;;;;;; "calc/calc-macs.el" "calc/calc-map.el" "calc/calc-math.el" ;;;;;; "calc/calc-menu.el" "calc/calc-misc.el" "calc/calc-mode.el" ;;;;;; "calc/calc-mtx.el" "calc/calc-nlfit.el" "calc/calc-poly.el" ;;;;;; "calc/calc-prog.el" "calc/calc-rewr.el" "calc/calc-rules.el" ;;;;;; "calc/calc-sel.el" "calc/calc-stat.el" "calc/calc-store.el" ;;;;;; "calc/calc-stuff.el" "calc/calc-trail.el" "calc/calc-undo.el" ;;;;;; "calc/calc-units.el" "calc/calc-vec.el" "calc/calc-yank.el" ;;;;;; "calc/calcalg2.el" "calc/calcalg3.el" "calc/calccomp.el" ;;;;;; "calc/calcsel2.el" "calendar/cal-bahai.el" "calendar/cal-coptic.el" ;;;;;; "calendar/cal-french.el" "calendar/cal-html.el" "calendar/cal-islam.el" ;;;;;; "calendar/cal-iso.el" "calendar/cal-julian.el" "calendar/cal-loaddefs.el" ;;;;;; "calendar/cal-mayan.el" "calendar/cal-menu.el" "calendar/cal-move.el" ;;;;;; "calendar/cal-persia.el" "calendar/cal-tex.el" "calendar/cal-x.el" ;;;;;; "calendar/diary-loaddefs.el" "calendar/hol-loaddefs.el" "cdl.el" ;;;;;; "cedet/cedet-cscope.el" "cedet/cedet-files.el" "cedet/cedet-global.el" ;;;;;; "cedet/cedet-idutils.el" "cedet/cedet.el" "cedet/ede/autoconf-edit.el" ;;;;;; "cedet/ede/cpp-root.el" "cedet/ede/dired.el" "cedet/ede/emacs.el" ;;;;;; "cedet/ede/files.el" "cedet/ede/linux.el" "cedet/ede/locate.el" ;;;;;; "cedet/ede/make.el" "cedet/ede/makefile-edit.el" "cedet/ede/pconf.el" ;;;;;; "cedet/ede/pmake.el" "cedet/ede/proj-archive.el" "cedet/ede/proj-aux.el" ;;;;;; "cedet/ede/proj-comp.el" "cedet/ede/proj-elisp.el" "cedet/ede/proj-info.el" ;;;;;; "cedet/ede/proj-misc.el" "cedet/ede/proj-obj.el" "cedet/ede/proj-prog.el" ;;;;;; "cedet/ede/proj-scheme.el" "cedet/ede/proj-shared.el" "cedet/ede/proj.el" ;;;;;; "cedet/ede/project-am.el" "cedet/ede/shell.el" "cedet/ede/simple.el" ;;;;;; "cedet/ede/source.el" "cedet/ede/speedbar.el" "cedet/ede/srecode.el" ;;;;;; "cedet/ede/system.el" "cedet/ede/util.el" "cedet/inversion.el" ;;;;;; "cedet/mode-local.el" "cedet/pulse.el" "cedet/semantic/analyze.el" ;;;;;; "cedet/semantic/analyze/complete.el" "cedet/semantic/analyze/debug.el" ;;;;;; "cedet/semantic/analyze/fcn.el" "cedet/semantic/analyze/refs.el" ;;;;;; "cedet/semantic/bovine.el" "cedet/semantic/bovine/c-by.el" ;;;;;; "cedet/semantic/bovine/c.el" "cedet/semantic/bovine/debug.el" ;;;;;; "cedet/semantic/bovine/el.el" "cedet/semantic/bovine/gcc.el" ;;;;;; "cedet/semantic/bovine/make-by.el" "cedet/semantic/bovine/make.el" ;;;;;; "cedet/semantic/bovine/scm-by.el" "cedet/semantic/bovine/scm.el" ;;;;;; "cedet/semantic/chart.el" "cedet/semantic/complete.el" "cedet/semantic/ctxt.el" ;;;;;; "cedet/semantic/db-debug.el" "cedet/semantic/db-ebrowse.el" ;;;;;; "cedet/semantic/db-el.el" "cedet/semantic/db-file.el" "cedet/semantic/db-find.el" ;;;;;; "cedet/semantic/db-global.el" "cedet/semantic/db-javascript.el" ;;;;;; "cedet/semantic/db-mode.el" "cedet/semantic/db-ref.el" "cedet/semantic/db-typecache.el" ;;;;;; "cedet/semantic/db.el" "cedet/semantic/debug.el" "cedet/semantic/decorate.el" ;;;;;; "cedet/semantic/decorate/include.el" "cedet/semantic/decorate/mode.el" ;;;;;; "cedet/semantic/dep.el" "cedet/semantic/doc.el" "cedet/semantic/ede-grammar.el" ;;;;;; "cedet/semantic/edit.el" "cedet/semantic/find.el" "cedet/semantic/format.el" ;;;;;; "cedet/semantic/fw.el" "cedet/semantic/grammar-wy.el" "cedet/semantic/grammar.el" ;;;;;; "cedet/semantic/html.el" "cedet/semantic/ia-sb.el" "cedet/semantic/ia.el" ;;;;;; "cedet/semantic/idle.el" "cedet/semantic/java.el" "cedet/semantic/lex-spp.el" ;;;;;; "cedet/semantic/lex.el" "cedet/semantic/mru-bookmark.el" ;;;;;; "cedet/semantic/sb.el" "cedet/semantic/scope.el" "cedet/semantic/senator.el" ;;;;;; "cedet/semantic/sort.el" "cedet/semantic/symref.el" "cedet/semantic/symref/cscope.el" ;;;;;; "cedet/semantic/symref/filter.el" "cedet/semantic/symref/global.el" ;;;;;; "cedet/semantic/symref/grep.el" "cedet/semantic/symref/idutils.el" ;;;;;; "cedet/semantic/symref/list.el" "cedet/semantic/tag-file.el" ;;;;;; "cedet/semantic/tag-ls.el" "cedet/semantic/tag-write.el" ;;;;;; "cedet/semantic/tag.el" "cedet/semantic/texi.el" "cedet/semantic/util-modes.el" ;;;;;; "cedet/semantic/util.el" "cedet/semantic/wisent.el" "cedet/semantic/wisent/comp.el" ;;;;;; "cedet/semantic/wisent/java-tags.el" "cedet/semantic/wisent/javascript.el" ;;;;;; "cedet/semantic/wisent/javat-wy.el" "cedet/semantic/wisent/js-wy.el" ;;;;;; "cedet/semantic/wisent/wisent.el" "cedet/srecode.el" "cedet/srecode/args.el" ;;;;;; "cedet/srecode/compile.el" "cedet/srecode/cpp.el" "cedet/srecode/ctxt.el" ;;;;;; "cedet/srecode/dictionary.el" "cedet/srecode/document.el" ;;;;;; "cedet/srecode/el.el" "cedet/srecode/expandproto.el" "cedet/srecode/extract.el" ;;;;;; "cedet/srecode/fields.el" "cedet/srecode/filters.el" "cedet/srecode/find.el" ;;;;;; "cedet/srecode/getset.el" "cedet/srecode/insert.el" "cedet/srecode/java.el" ;;;;;; "cedet/srecode/map.el" "cedet/srecode/mode.el" "cedet/srecode/semantic.el" ;;;;;; "cedet/srecode/srt-wy.el" "cedet/srecode/srt.el" "cedet/srecode/table.el" ;;;;;; "cedet/srecode/template.el" "cedet/srecode/texi.el" "cus-dep.el" ;;;;;; "dframe.el" "dired-aux.el" "dired-x.el" "dos-fns.el" "dos-vars.el" ;;;;;; "dos-w32.el" "ediff-diff.el" "ediff-init.el" "ediff-merg.el" ;;;;;; "ediff-ptch.el" "ediff-vers.el" "ediff-wind.el" "electric.el" ;;;;;; "emacs-lisp/assoc.el" "emacs-lisp/authors.el" "emacs-lisp/avl-tree.el" ;;;;;; "emacs-lisp/bindat.el" "emacs-lisp/byte-opt.el" "emacs-lisp/chart.el" ;;;;;; "emacs-lisp/cl-compat.el" "emacs-lisp/cl-extra.el" "emacs-lisp/cl-loaddefs.el" ;;;;;; "emacs-lisp/cl-macs.el" "emacs-lisp/cl-seq.el" "emacs-lisp/cl-specs.el" ;;;;;; "emacs-lisp/cust-print.el" "emacs-lisp/eieio-base.el" "emacs-lisp/eieio-comp.el" ;;;;;; "emacs-lisp/eieio-custom.el" "emacs-lisp/eieio-datadebug.el" ;;;;;; "emacs-lisp/eieio-opt.el" "emacs-lisp/eieio-speedbar.el" ;;;;;; "emacs-lisp/eieio.el" "emacs-lisp/find-gc.el" "emacs-lisp/gulp.el" ;;;;;; "emacs-lisp/lisp-mnt.el" "emacs-lisp/lmenu.el" "emacs-lisp/regi.el" ;;;;;; "emacs-lisp/sregex.el" "emacs-lisp/tcover-ses.el" "emacs-lisp/tcover-unsafep.el" ;;;;;; "emacs-lock.el" "emulation/cua-gmrk.el" "emulation/cua-rect.el" ;;;;;; "emulation/edt-lk201.el" "emulation/edt-mapper.el" "emulation/edt-pc.el" ;;;;;; "emulation/edt-vt100.el" "emulation/tpu-extras.el" "emulation/viper-cmd.el" ;;;;;; "emulation/viper-ex.el" "emulation/viper-init.el" "emulation/viper-keym.el" ;;;;;; "emulation/viper-macs.el" "emulation/viper-mous.el" "emulation/viper-util.el" ;;;;;; "erc/erc-backend.el" "erc/erc-goodies.el" "erc/erc-ibuffer.el" ;;;;;; "erc/erc-lang.el" "eshell/em-alias.el" "eshell/em-banner.el" ;;;;;; "eshell/em-basic.el" "eshell/em-cmpl.el" "eshell/em-dirs.el" ;;;;;; "eshell/em-glob.el" "eshell/em-hist.el" "eshell/em-ls.el" ;;;;;; "eshell/em-pred.el" "eshell/em-prompt.el" "eshell/em-rebind.el" ;;;;;; "eshell/em-script.el" "eshell/em-smart.el" "eshell/em-term.el" ;;;;;; "eshell/em-unix.el" "eshell/em-xtra.el" "eshell/esh-arg.el" ;;;;;; "eshell/esh-cmd.el" "eshell/esh-ext.el" "eshell/esh-io.el" ;;;;;; "eshell/esh-module.el" "eshell/esh-opt.el" "eshell/esh-proc.el" ;;;;;; "eshell/esh-util.el" "eshell/esh-var.el" "ezimage.el" "foldout.el" ;;;;;; "font-setting.el" "format-spec.el" "forms-d2.el" "forms-pass.el" ;;;;;; "fringe.el" "generic-x.el" "gnus/auth-source.el" "gnus/compface.el" ;;;;;; "gnus/gnus-async.el" "gnus/gnus-bcklg.el" "gnus/gnus-cite.el" ;;;;;; "gnus/gnus-cus.el" "gnus/gnus-demon.el" "gnus/gnus-dup.el" ;;;;;; "gnus/gnus-eform.el" "gnus/gnus-ems.el" "gnus/gnus-int.el" ;;;;;; "gnus/gnus-logic.el" "gnus/gnus-mh.el" "gnus/gnus-salt.el" ;;;;;; "gnus/gnus-score.el" "gnus/gnus-setup.el" "gnus/gnus-srvr.el" ;;;;;; "gnus/gnus-sum.el" "gnus/gnus-topic.el" "gnus/gnus-undo.el" ;;;;;; "gnus/gnus-util.el" "gnus/gnus-uu.el" "gnus/gnus-vm.el" "gnus/ietf-drums.el" ;;;;;; "gnus/legacy-gnus-agent.el" "gnus/mail-parse.el" "gnus/mail-prsvr.el" ;;;;;; "gnus/mail-source.el" "gnus/mailcap.el" "gnus/messcompat.el" ;;;;;; "gnus/mm-bodies.el" "gnus/mm-decode.el" "gnus/mm-encode.el" ;;;;;; "gnus/mm-util.el" "gnus/mm-view.el" "gnus/mml-sec.el" "gnus/mml-smime.el" ;;;;;; "gnus/mml.el" "gnus/nnagent.el" "gnus/nnbabyl.el" "gnus/nndb.el" ;;;;;; "gnus/nndir.el" "gnus/nndraft.el" "gnus/nneething.el" "gnus/nngateway.el" ;;;;;; "gnus/nnheader.el" "gnus/nnimap.el" "gnus/nnir.el" "gnus/nnlistserv.el" ;;;;;; "gnus/nnmail.el" "gnus/nnmaildir.el" "gnus/nnmairix.el" "gnus/nnmbox.el" ;;;;;; "gnus/nnmh.el" "gnus/nnnil.el" "gnus/nnoo.el" "gnus/nnrss.el" ;;;;;; "gnus/nnslashdot.el" "gnus/nnspool.el" "gnus/nntp.el" "gnus/nnultimate.el" ;;;;;; "gnus/nnvirtual.el" "gnus/nnwarchive.el" "gnus/nnweb.el" ;;;;;; "gnus/nnwfm.el" "gnus/pop3.el" "gnus/rfc1843.el" "gnus/rfc2045.el" ;;;;;; "gnus/rfc2047.el" "gnus/rfc2104.el" "gnus/rfc2231.el" "gnus/sieve-manage.el" ;;;;;; "gnus/smime.el" "gnus/spam-stat.el" "gnus/spam-wash.el" "gnus/starttls.el" ;;;;;; "gnus/utf7.el" "gnus/webmail.el" "hex-util.el" "hfy-cmap.el" ;;;;;; "htmlfontify.el" "ibuf-ext.el" "international/charprop.el" ;;;;;; "international/cp51932.el" "international/eucjp-ms.el" "international/fontset.el" ;;;;;; "international/iso-ascii.el" "international/ja-dic-cnv.el" ;;;;;; "international/ja-dic-utl.el" "international/ogonek.el" "international/uni-bidi.el" ;;;;;; "international/uni-category.el" "international/uni-combining.el" ;;;;;; "international/uni-comment.el" "international/uni-decimal.el" ;;;;;; "international/uni-decomposition.el" "international/uni-digit.el" ;;;;;; "international/uni-lowercase.el" "international/uni-mirrored.el" ;;;;;; "international/uni-name.el" "international/uni-numeric.el" ;;;;;; "international/uni-old-name.el" "international/uni-titlecase.el" ;;;;;; "international/uni-uppercase.el" "json.el" "kermit.el" "language/hanja-util.el" ;;;;;; "language/thai-word.el" "ldefs-boot.el" "mail/blessmail.el" ;;;;;; "mail/mailheader.el" "mail/mailpost.el" "mail/mspools.el" ;;;;;; "mail/rfc2368.el" "mail/rfc822.el" "mail/rmail-spam-filter.el" ;;;;;; "mail/rmailedit.el" "mail/rmailkwd.el" "mail/rmailmm.el" ;;;;;; "mail/rmailmsc.el" "mail/rmailsort.el" "mail/rmailsum.el" ;;;;;; "mail/undigest.el" "md4.el" "mh-e/mh-acros.el" "mh-e/mh-alias.el" ;;;;;; "mh-e/mh-buffers.el" "mh-e/mh-compat.el" "mh-e/mh-funcs.el" ;;;;;; "mh-e/mh-gnus.el" "mh-e/mh-identity.el" "mh-e/mh-inc.el" ;;;;;; "mh-e/mh-junk.el" "mh-e/mh-letter.el" "mh-e/mh-limit.el" ;;;;;; "mh-e/mh-loaddefs.el" "mh-e/mh-mime.el" "mh-e/mh-print.el" ;;;;;; "mh-e/mh-scan.el" "mh-e/mh-search.el" "mh-e/mh-seq.el" "mh-e/mh-show.el" ;;;;;; "mh-e/mh-speed.el" "mh-e/mh-thread.el" "mh-e/mh-tool-bar.el" ;;;;;; "mh-e/mh-utils.el" "mh-e/mh-xface.el" "mouse-copy.el" "mouse.el" ;;;;;; "mwheel.el" "net/dns.el" "net/eudc-vars.el" "net/eudcb-bbdb.el" ;;;;;; "net/eudcb-ldap.el" "net/eudcb-mab.el" "net/eudcb-ph.el" ;;;;;; "net/hmac-def.el" "net/hmac-md5.el" "net/imap-hash.el" "net/imap.el" ;;;;;; "net/ldap.el" "net/mairix.el" "net/netrc.el" "net/newsticker.el" ;;;;;; "net/ntlm.el" "net/sasl-cram.el" "net/sasl-digest.el" "net/sasl-ntlm.el" ;;;;;; "net/sasl.el" "net/socks.el" "net/tls.el" "net/tramp-cache.el" ;;;;;; "net/tramp-cmds.el" "net/tramp-compat.el" "net/tramp-fish.el" ;;;;;; "net/tramp-gvfs.el" "net/tramp-gw.el" "net/tramp-imap.el" ;;;;;; "net/tramp-smb.el" "net/tramp-uu.el" "net/trampver.el" "net/zeroconf.el" ;;;;;; "nxml/nxml-enc.el" "nxml/nxml-maint.el" "nxml/nxml-ns.el" ;;;;;; "nxml/nxml-outln.el" "nxml/nxml-parse.el" "nxml/nxml-rap.el" ;;;;;; "nxml/nxml-util.el" "nxml/rng-dt.el" "nxml/rng-loc.el" "nxml/rng-maint.el" ;;;;;; "nxml/rng-match.el" "nxml/rng-parse.el" "nxml/rng-pttrn.el" ;;;;;; "nxml/rng-uri.el" "nxml/rng-util.el" "nxml/xsd-regexp.el" ;;;;;; "org/org-bibtex.el" "org/org-colview.el" "org/org-compat.el" ;;;;;; "org/org-crypt.el" "org/org-datetree.el" "org/org-exp-blocks.el" ;;;;;; "org/org-faces.el" "org/org-gnus.el" "org/org-habit.el" "org/org-info.el" ;;;;;; "org/org-inlinetask.el" "org/org-install.el" "org/org-jsinfo.el" ;;;;;; "org/org-list.el" "org/org-mac-message.el" "org/org-macs.el" ;;;;;; "org/org-mew.el" "org/org-mhe.el" "org/org-mouse.el" "org/org-protocol.el" ;;;;;; "org/org-rmail.el" "org/org-src.el" "org/org-vm.el" "org/org-w3m.el" ;;;;;; "org/org-wl.el" "password-cache.el" "patcomp.el" "pcvs-info.el" ;;;;;; "pcvs-parse.el" "pcvs-util.el" "pgg-def.el" "pgg-parse.el" ;;;;;; "pgg-pgp.el" "pgg-pgp5.el" "play/gamegrid.el" "play/gametree.el" ;;;;;; "play/meese.el" "progmodes/ada-prj.el" "progmodes/cc-align.el" ;;;;;; "progmodes/cc-awk.el" "progmodes/cc-bytecomp.el" "progmodes/cc-cmds.el" ;;;;;; "progmodes/cc-defs.el" "progmodes/cc-fonts.el" "progmodes/cc-langs.el" ;;;;;; "progmodes/cc-menus.el" "progmodes/ebnf-abn.el" "progmodes/ebnf-bnf.el" ;;;;;; "progmodes/ebnf-dtd.el" "progmodes/ebnf-ebx.el" "progmodes/ebnf-iso.el" ;;;;;; "progmodes/ebnf-otz.el" "progmodes/ebnf-yac.el" "progmodes/idlw-complete-structtag.el" ;;;;;; "progmodes/idlw-help.el" "progmodes/idlw-toolbar.el" "progmodes/mantemp.el" ;;;;;; "progmodes/xscheme.el" "ps-def.el" "ps-mule.el" "ps-samp.el" ;;;;;; "s-region.el" "saveplace.el" "sb-image.el" "scroll-bar.el" ;;;;;; "select.el" "soundex.el" "subdirs.el" "tempo.el" "textmodes/bib-mode.el" ;;;;;; "textmodes/makeinfo.el" "textmodes/page-ext.el" "textmodes/refbib.el" ;;;;;; "textmodes/refer.el" "textmodes/reftex-auc.el" "textmodes/reftex-dcr.el" ;;;;;; "textmodes/reftex-ref.el" "textmodes/reftex-sel.el" "textmodes/reftex-toc.el" ;;;;;; "textmodes/texnfo-upd.el" "timezone.el" "tooltip.el" "tree-widget.el" ;;;;;; "uniquify.el" "url/url-about.el" "url/url-cookie.el" "url/url-dired.el" ;;;;;; "url/url-expand.el" "url/url-ftp.el" "url/url-history.el" ;;;;;; "url/url-imap.el" "url/url-methods.el" "url/url-nfs.el" "url/url-proxy.el" ;;;;;; "url/url-vars.el" "vc-dav.el" "vcursor.el" "vt-control.el" ;;;;;; "vt100-led.el" "w32-fns.el" "w32-vars.el" "x-dnd.el") (19260 ;;;;;; 363 602071)) ;;;*** (provide 'loaddefs) ;; Local Variables: ;; version-control: never ;; no-byte-compile: t ;; no-update-autoloads: t ;; coding: utf-8 ;; End: ;;; loaddefs.el ends here