Mercurial > emacs
view src/s/darwin.h @ 71879:d236eeffa8f7
*** empty log message ***
author | Kim F. Storm <storm@cua.dk> |
---|---|
date | Thu, 13 Jul 2006 22:52:49 +0000 |
parents | 3bd95f4f2941 |
children | 3d45362f1d38 c5406394f567 |
line wrap: on
line source
/* System description header file for Darwin (Mac OS X). Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /* * Define symbols to identify the version of Unix this is. * Define all the symbols that apply correctly. */ /* #define UNIPLUS */ /* #define USG5 */ /* #define USG */ /* #define HPUX */ /* #define UMAX */ /* #define BSD4_1 */ #define BSD4_2 /* BSD4_3 and BSD4_4 are already defined in sys/param.h */ /* #define BSD4_3 */ /* #define BSD4_4 */ #define BSD_SYSTEM /* #define VMS */ #if 0 /* Don't define DARWIN on Mac OS X because CoreFoundation.h uses it to distinguish Mac OS X from bare Darwin. */ #ifndef DARWIN #define DARWIN 1 #endif #endif /* MAC_OS is used to conditionally compile code common to both MAC_OS8 and MAC_OSX. */ #ifdef MAC_OSX #ifdef HAVE_CARBON #define MAC_OS #endif #endif /* SYSTEM_TYPE should indicate the kind of system you are using. It sets the Lisp variable system-type. */ #define SYSTEM_TYPE "darwin" /* NOMULTIPLEJOBS should be defined if your system's shell does not have "job control" (the ability to stop a program, run some other program, then continue the first one). */ /* #define NOMULTIPLEJOBS */ /* Emacs can read input using SIGIO and buffering characters itself, or using CBREAK mode and making C-g cause SIGINT. The choice is controlled by the variable interrupt_input. Define INTERRUPT_INPUT to make interrupt_input = 1 the default (use SIGIO) Emacs uses the presence or absence of the SIGIO and BROKEN_SIGIO macros to indicate whether or not signal-driven I/O is possible. It uses INTERRUPT_INPUT to decide whether to use it by default. SIGIO can be used only on systems that implement it (4.2 and 4.3). CBREAK mode has two disadvantages 1) At least in 4.2, it is impossible to handle the Meta key properly. I hear that in system V this problem does not exist. 2) Control-G causes output to be discarded. I do not know whether this can be fixed in system V. Another method of doing input is planned but not implemented. It would have Emacs fork off a separate process to read the input and send it to the true Emacs process through a pipe. */ #define INTERRUPT_INPUT /* Letter to use in finding device name of first pty, if system supports pty's. 'a' means it is /dev/ptya0 */ #define FIRST_PTY_LETTER 'p' /* * Define HAVE_TERMIOS if the system provides POSIX-style * functions and macros for terminal control. * * Define HAVE_TERMIO if the system provides sysV-style ioctls * for terminal control. * * Do not define both. HAVE_TERMIOS is preferred, if it is * supported on your system. */ #define HAVE_TERMIOS /* #define HAVE_TERMIO */ #define NO_TERMIO /* * Define HAVE_PTYS if the system supports pty devices. * Note: PTYs are broken on darwin <6. Use at your own risk. */ #define HAVE_PTYS /** * PTYs only work correctly on Darwin 7 or higher. So make the * default for process-connection-type dependent on the kernel * version. */ #define MIN_PTY_KERNEL_VERSION '7' /* * Define NONSYSTEM_DIR_LIBRARY to make Emacs emulate * The 4.2 opendir, etc., library functions. */ /* #define NONSYSTEM_DIR_LIBRARY */ /* Define this symbol if your system has the functions bcopy, etc. */ #define BSTRING /* subprocesses should be defined if you want to have code for asynchronous subprocesses (as used in M-x compile and M-x shell). This is generally OS dependent, and not supported under most USG systems. */ #define subprocesses /* If your system uses COFF (Common Object File Format) then define the preprocessor symbol "COFF". */ /* #define COFF */ /* define MAIL_USE_FLOCK if the mailer uses flock to interlock access to /usr/spool/mail/$USER. The alternative is that a lock file named /usr/spool/mail/$USER.lock. */ #define MAIL_USE_FLOCK /* Define CLASH_DETECTION if you want lock files to be written so that Emacs can tell instantly when you try to modify a file that someone else has modified in his Emacs. */ #define CLASH_DETECTION /* Define this if your operating system declares signal handlers to have a type other than the usual. `The usual' is `void' for ANSI C systems (i.e. when the __STDC__ macro is defined), and `int' for pre-ANSI systems. If you're using GCC on an older system, __STDC__ will be defined, but the system's include files will still say that signal returns int or whatever; in situations like that, define this to be what the system's include files want. */ /* #define SIGTYPE int */ /* If the character used to separate elements of the executable path is not ':', #define this to be the appropriate character constant. */ /* #define SEPCHAR ':' */ /* Define this if the system can use mmap for buffer text allocation. */ /* #define USE_MMAP_FOR_BUFFERS 1 */ /* ============================================================ */ /* Here, add any special hacks needed to make Emacs work on this system. For example, you might define certain system call names that don't exist on your system, or that do different things on your system and must be used only through an encapsulation (Which you should place, by convention, in sysdep.c). */ /* Some compilers tend to put everything declared static into the initialized data area, which becomes pure after dumping Emacs. On these systems, you must #define static as nothing to foil this. Note that emacs carefully avoids static vars inside functions. */ /* #define static */ /* If the system's imake configuration file defines `NeedWidePrototypes' as `NO', we must define NARROWPROTO manually. Such a define is generated in the Makefile generated by `xmkmf'. If we don't define NARROWPROTO, we will see the wrong function prototypes for X functions taking float or double parameters. */ /* #define NARROWPROTO 1 */ /* ============================================================ */ /* After adding support for a new system, modify the large case statement in the `configure' script to recognize reasonable configuration names, and add a description of the system to `etc/MACHINES'. If you've just fixed a problem in an existing configuration file, you should also check `etc/MACHINES' to make sure its descriptions of known problems in that configuration should be updated. */ /* Avoid the use of the name init_process (process.c) because it is also the name of a Mach system call. */ #define init_process emacs_init_process /* Fix compilation problem for regex.c. */ #define __restrict /* Used in dispnew.c. Copied from freebsd.h. */ #define PENDING_OUTPUT_COUNT(FILE) ((FILE)->_p - (FILE)->_bf._base) /* System uses OXTABS instead of the expected TAB3. (Copied from bsd386.h.) */ #define TAB3 OXTABS /* Darwin ld insists on the use of malloc routines in the System framework. */ #define SYSTEM_MALLOC /* Define HAVE_SOCKETS if system supports 4.2-compatible sockets. */ #define HAVE_SOCKETS /* In Carbon, asynchronous I/O (using SIGIO) can't be used for window events because they don't come from sockets, even though it works fine on tty's. */ #ifdef HAVE_CARBON #define NO_SOCK_SIGIO #endif /* Extra initialization calls in main for Mac OS X system type. */ #ifdef HAVE_CARBON #define SYMS_SYSTEM syms_of_mac() #endif /* Definitions for how to dump. Copied from nextstep.h. */ #define UNEXEC unexmacosx.o #define START_FILES pre-crt0.o /* start_of_text isn't actually used, so make it compile without error. */ #define TEXT_START (0) /* This seems to be right for end_of_text, but it may not be used anyway. */ #define TEXT_END get_etext() /* This seems to be right for end_of_data, but it may not be used anyway. */ #define DATA_END get_edata() /* Definitions for how to compile & link. */ /* Indicate that we are compiling for Mac OS X and where to find Mac specific headers. */ #define C_SWITCH_SYSTEM -fpascal-strings -DMAC_OSX -I../mac/src /* Link in the Carbon lib. */ #ifdef HAVE_CARBON #define LIBS_CARBON -framework Carbon -framework QuickTime #else #define LIBS_CARBON #endif /* The -headerpad option tells ld (see man page) to leave room at the end of the header for adding load commands. Needed for dumping. 0x690 is the total size of 30 segment load commands (at 56 each). */ #define LD_SWITCH_SYSTEM_TEMACS -prebind LIBS_CARBON -Xlinker -headerpad -Xlinker 690 #define C_SWITCH_SYSTEM_TEMACS -Dtemacs /* The ncurses library has been moved out of the System framework in Mac OS X 10.2. So if ./configure detects it, set the command-line option to use it. */ #ifdef HAVE_LIBNCURSES #define LIBS_TERMCAP -lncurses /* This prevents crashes when running Emacs in Terminal.app under 10.2. */ #define TERMINFO #endif /* Link this program just by running cc. */ #define ORDINARY_LINK /* We don't have a g library, so override the -lg LIBS_DEBUG switch. */ #define LIBS_DEBUG /* Adding -lm confuses the dynamic linker, so omit it. */ #define LIB_MATH /* Tell src/Makefile.in to create files in the Mac OS X application bundle mac/Emacs.app. */ #ifdef HAVE_CARBON #define OTHER_FILES macosx-app #endif /* Define the following so emacs symbols will not conflict with those in the System framework. Otherwise -prebind will not work. */ /* Do not define abort in emacs.c. */ #define NO_ABORT /* Do not define matherr in floatfns.c. */ #define NO_MATHERR /* This prevents a compilation error in xfaces.c: struct kboard * is used in a function protocol the first time this type appears in the file, since MULTI_KBOARD is undefined for the Mac OS X build. */ #ifndef NOT_C_CODE struct kboard; #endif /* The following solves the problem that Emacs hangs when evaluating (make-comint "test0" "/nodir/nofile" nil "") when /nodir/nofile does not exist. */ #undef HAVE_WORKING_VFORK #define vfork fork /* Don't close pty in process.c to make it as controlling terminal. It is already a controlling terminal of subprocess, because we did ioctl TIOCSCTTY. */ #define DONT_REOPEN_PTY #ifdef temacs #define malloc unexec_malloc #define realloc unexec_realloc #define free unexec_free #endif /* This makes create_process in process.c save and restore signal handlers correctly. Suggested by Nozomu Ando.*/ #define POSIX_SIGNALS /* Reroute calls to SELECT to the version defined in mac.c to fix the problem of Emacs requiring an extra return to be typed to start working when started from the command line. */ #if defined (HAVE_CARBON) && (defined (emacs) || defined (temacs)) #define select sys_select #endif /* Use the GC_MAKE_GCPROS_NOOPS (see lisp.h) method for marking the stack. */ #define GC_MARK_STACK GC_MAKE_GCPROS_NOOPS /* arch-tag: 481d443d-4f89-43ea-b5fb-49706d95fa41 (do not change this comment) */