view nextstep/compile @ 96675:d45acf0c8d23

merging Emacs.app (NeXTstep port)

#!/bin/sh

# This script configures and builds Emacs to the subdirectory ./build .
#
# If --shared-lisp 'install_prefix' is given, lisp files will be installed to
# install_prefix/share/emacs/23.0.0.  This option must be run with 'sudo'.
#
# Otherwise (default) lisp will be installed under Emacs.app/Contents/Resources.
# It does this by configuring it to install there, and running "make install".
#
# Some setup is different for GNUstep vs. Cocoa, and it determines which one
# it's on using 'uname'.

# After it is run, Emacs can be run directly from the .app, which itself
# can be placed anywhere.

# Further C development can be done using Xcode on OS X (not tested recently),
# or by typing './remake' in the '../src' directory.  Further Lisp
# development can be done by either copying the files you modify
# into install location, or running this script again.


# Set up path and config variables.

PREFIX=""
while [ $# -gt 0 ]; do
    case "$1" in
	--shared-lisp=*)
            PREFIX=`echo "$1" | sed s/--shared-lisp=//`
            shift
            ;;
	--enable-local-lisp-path=*)
            locallisppath=`echo "$1" | sed s/--enable-local-lisp-path=//`
            shift
            ;;
	*)
            echo "Usage: $0 [--shared-lisp='install_root' --enable-local-lisp-path='some path(s)']"
            exit
    esac
done

DISTDIR=`pwd`/..

#OPTFLAGS='-g -O2'
OPTFLAGS='-g'

# MAC OS X
if [ `uname` == "Darwin" ]; then
    BASEDIR=`pwd`/build/Emacs.app/Contents
    BINDIR=${BASEDIR}/MacOS
    if [ "x$PREFIX" == "x" ]; then
	PREFIX=${BASEDIR}/Resources
    fi
# If you want to try experimental enhanced Ctrl-g support, add to NS_CFG_OPTS:
# --enable-cocoa-experimental-ctrl-g
# (See bottom of USAGE.txt)
    NS_CFG_OPTS="--with-ns --without-x --without-freetype --prefix=${PREFIX} --exec_prefix=${BASEDIR}/MacOS --libexecdir=${BASEDIR}/MacOS/libexec"
# --enable-cocoa-experimental-ctrl-g"
#    MAKE="make -j3"
    steve=`/usr/sbin/sysctl hw.ncpu | awk '{print $NF}'`
    MAKE="make -j`expr $steve + 1`"
    export CC=gcc-4.0
    export MACOSX_DEPLOYMENT_TARGET=10.3
    export MACOSX_DEPLOYMENT_TARGET_ppc=10.3
    export MACOSX_DEPLOYMENT_TARGET_i386=10.4
    export CFLAGS="$OPTFLAGS -arch ppc -arch i386"
# -universal -sdk /Developer/SDKs/MacOSX10.4u.sdk
# -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk

# GNUSTEP
else

    # Currently must pass three dirs into Make process via environment variables.
    source /etc/GNUstep/GNUstep.conf
    if [ "x$GNUSTEP_MAKEFILES" == "x" ]; then
	if [ "x$GNUSTEP_SYSTEM_ROOT" == "x" ]; then
	    echo "Failed to obtain any useful information from /etc/GNUstep/GNUstep.conf."
	    echo "Please make sure GNUstep is installed on your system."
	    exit
	fi
	GNUSTEP_MAKEFILES=${GNUSTEP_SYSTEM_ROOT}/Library/Makefiles
	GNUSTEP_SYSTEM_HEADERS=${GNUSTEP_SYSTEM_ROOT}/Library/Headers
	GNUSTEP_SYSTEM_LIBRARIES=${GNUSTEP_SYSTEM_ROOT}/Library/Libraries
    fi
    export GNUSTEP_MAKEFILES
    export GNUSTEP_SYSTEM_HEADERS
    export GNUSTEP_SYSTEM_LIBRARIES

    BASEDIR=`pwd`/build/Emacs.app
    BINDIR=${BASEDIR}
    if [ "x${PREFIX}" == "x" ]; then
	PREFIX=${BASEDIR}/Resources
    fi
    NS_CFG_OPTS="--with-ns --without-x --without-freetype --prefix=${PREFIX} --exec-prefix=${BASEDIR} --libexecdir=${BASEDIR}/libexec"
# --enable-cocoa-experimental-ctrl-g

    if [ "x$MAKE" == "x" ]; then
	if [ "`gmake 2>&1`" == "gmake: *** No targets specified and no makefile found.  Stop." ]; then
	    MAKE=gmake
	else
	    MAKE=make
	fi
	export MAKE
	CFLAGS="$OPTFLAGS"
	export CFLAGS
    fi

# PENDING: Not sure why this is needed
    export EMACSLOADPATH="${DISTDIR}/lisp:${DISTDIR}/lisp/emacs-lisp:${DISTDIR}/leim"
fi

# End variable setup.
###############################################################################

# Prepare a clean slate
rm -fr build/Emacs.app

# Configure if needed
cd ..
if [ ! -f Makefile ]; then
    echo "./configure ${NS_CFG_OPTS}"
./configure <<EOF ${NS_CFG_OPTS}
EOF
#    ./configure ${NS_CFG_OPTS}
    if [ $? != 0 ]; then
        echo "*** Configure run failed. ***"
	echo "Please examine the above output to determine what went wrong,"
	echo "edit this script (\'compile\') to fix it, and rerun."
         # These are written BEFORE the job is compete, then it won't get done
         # next time, causing errors about CTLau-b5, tsang-b5, PY, etc..
	rm -f leim/changed.misc leim/changed.tit
        exit 1
    fi
fi

# Pete's addition for local lisp load-path
if [ "x$locallisppath" != "x" ]; then
    echo " * Local lisp path is being enabled"
    (cd src
	if [ -r epaths.h-orig ]; then
#           mv ../src/epaths.h-orig ../src/epaths.h
            echo "### src/epaths.h-orig already exists, no further change ###"
	else
            mv epaths.h epaths.h-orig
            printf "s,\(#define PATH_LOADSEARCH \"\),\\\1%s:,\n" "$
{locallisppath}" > locallisppath.sed
            cat epaths.h-orig | sed -f locallisppath.sed > epaths.h
            rm locallisppath.sed
	fi)
fi

# Clean up to avoid DOC-xxx and emacs-xxx out-of-controlness
rm -f ../etc/DOC-* ../src/emacs-*


# Go (installs binaries to ./build/Emacs.app, lisp to there or PREFIX)
echo "make install"
$MAKE
status=$?

if [ -f src/epaths.h-orig ]; then
    mv src/epaths.h-orig src/epaths.h
fi

if [ $status != 0 ]; then
    echo "*** Compilation failed. ***"
    echo "Please examine the above output to determine what went wrong,"
    echo "edit the configure options in this script (\'compile\') to fix it, and rerun."
#    rm -f leim/changed.misc leim/changed.tit
    exit 1
fi

$MAKE install
if [ $? != 0 ]; then
    echo "*** Compilation succeeded, but .app assembly failed. ***"
    echo "Please examine the above output to determine what went wrong,"
    echo "edit the configure options in this script (\'compile\') to fix it, and rerun."
#    rm -f leim/changed.misc leim/changed.tit
    exit 1
fi

# Move version stuff up to Resources
cd ${BASEDIR}/Resources
if [ -d share/emacs ]; then
    # clean up self-contained build
    mv -f share/emacs/*/* .
fi

if [ ! -d info ]; then
    # happens on GNUstep, not OS X
    mv -f share/info .
fi
rm -fr share

# Get rid of .el.gz when .elc is present.. purists will complain, but this
# knocks the app size down substantially.
cd lisp
#for f in `find . -name '*.elc' -print | sed -e s/.elc/.{el,el.gz}/`
#do
#    rm -f $f
#done

# Bin cleanup
cd $BINDIR/bin
rm -f emacs emacs-23*

# Move libexec stuff up, and link it from bin
cd ../libexec
mv -f emacs/*/*/* .
rm -fr emacs
cd ../bin
ln -sf ../libexec/* .

# On OS X, install the bundled ispell
#if [ `uname` == "Darwin" ]; then
#    cd $DISTDIR
#    cp ispell-3.3.01/bin/ispell* ${BINDIR}/libexec
#    cp -R ispell-3.3.01/lib ${BINDIR}/libexec
#fi

echo ""
echo "Build successful."
echo ""