Mercurial > emacs
view src/ccl.c @ 17550:d6545cfb6c5a
Synched with custom 1.90.
| author | Per Abrahamsen <abraham@dina.kvl.dk> |
|---|---|
| date | Thu, 24 Apr 1997 16:53:55 +0000 |
| parents | 6db43d8c9dfc |
| children | 25d58ba29c1b |
line wrap: on
line source
/* CCL (Code Conversion Language) interpreter. Ver.1.0 Copyright (C) 1995 Free Software Foundation, Inc. Copyright (C) 1995 Electrotechnical Laboratory, JAPAN. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <stdio.h> #ifdef emacs #include <config.h> #include "lisp.h" #include "charset.h" #include "ccl.h" #include "coding.h" #else /* not emacs */ #include "mulelib.h" #endif /* not emacs */ /* Alist of fontname patterns vs corresponding CCL program. */ Lisp_Object Vfont_ccl_encoder_alist; /* Vector of CCL program names vs corresponding program data. */ Lisp_Object Vccl_program_table; /* CCL (Code Conversion Language) is a simple language which has operations on one input buffer, one output buffer, and 7 registers. The syntax of CCL is described in `ccl.el'. Emacs Lisp function `ccl-compile' compiles a CCL program and produces a CCL code which is a vector of integers. The structure of this vector is as follows: The 1st element: buffer-magnification, a factor for the size of output buffer compared with the size of input buffer. The 2nd element: address of CCL code to be executed when encountered with end of input stream. The 3rd and the remaining elements: CCL codes. */ /* Header of CCL compiled code */ #define CCL_HEADER_BUF_MAG 0 #define CCL_HEADER_EOF 1 #define CCL_HEADER_MAIN 2 /* CCL code is a sequence of 28-bit non-negative integers (i.e. the MSB is always 0), each contains CCL command and/or arguments in the following format: |----------------- integer (28-bit) ------------------| |------- 17-bit ------|- 3-bit --|- 3-bit --|- 5-bit -| |--constant argument--|-register-|-register-|-command-| ccccccccccccccccc RRR rrr XXXXX or |------- relative address -------|-register-|-command-| cccccccccccccccccccc rrr XXXXX or |------------- constant or other args ----------------| cccccccccccccccccccccccccccc where, `cc...c' is a non-negative integer indicating constant value (the left most `c' is always 0) or an absolute jump address, `RRR' and `rrr' are CCL register number, `XXXXX' is one of the following CCL commands. */ /* CCL commands Each comment fields shows one or more lines for command syntax and the following lines for semantics of the command. In semantics, IC stands for Instruction Counter. */ #define CCL_SetRegister 0x00 /* Set register a register value: 1:00000000000000000RRRrrrXXXXX ------------------------------ reg[rrr] = reg[RRR]; */ #define CCL_SetShortConst 0x01 /* Set register a short constant value: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX ------------------------------ reg[rrr] = CCCCCCCCCCCCCCCCCCC; */ #define CCL_SetConst 0x02 /* Set register a constant value: 1:00000000000000000000rrrXXXXX 2:CONSTANT ------------------------------ reg[rrr] = CONSTANT; IC++; */ #define CCL_SetArray 0x03 /* Set register an element of array: 1:CCCCCCCCCCCCCCCCCRRRrrrXXXXX 2:ELEMENT[0] 3:ELEMENT[1] ... ------------------------------ if (0 <= reg[RRR] < CC..C) reg[rrr] = ELEMENT[reg[RRR]]; IC += CC..C; */ #define CCL_Jump 0x04 /* Jump: 1:A--D--D--R--E--S--S-000XXXXX ------------------------------ IC += ADDRESS; */ /* Note: If CC..C is greater than 0, the second code is omitted. */ #define CCL_JumpCond 0x05 /* Jump conditional: 1:A--D--D--R--E--S--S-rrrXXXXX ------------------------------ if (!reg[rrr]) IC += ADDRESS; */ #define CCL_WriteRegisterJump 0x06 /* Write register and jump: 1:A--D--D--R--E--S--S-rrrXXXXX ------------------------------ write (reg[rrr]); IC += ADDRESS; */ #define CCL_WriteRegisterReadJump 0x07 /* Write register, read, and jump: 1:A--D--D--R--E--S--S-rrrXXXXX 2:A--D--D--R--E--S--S-rrrYYYYY ----------------------------- write (reg[rrr]); IC++; read (reg[rrr]); IC += ADDRESS; */ /* Note: If read is suspended, the resumed execution starts from the second code (YYYYY == CCL_ReadJump). */ #define CCL_WriteConstJump 0x08 /* Write constant and jump: 1:A--D--D--R--E--S--S-000XXXXX 2:CONST ------------------------------ write (CONST); IC += ADDRESS; */ #define CCL_WriteConstReadJump 0x09 /* Write constant, read, and jump: 1:A--D--D--R--E--S--S-rrrXXXXX 2:CONST 3:A--D--D--R--E--S--S-rrrYYYYY ----------------------------- write (CONST); IC += 2; read (reg[rrr]); IC += ADDRESS; */ /* Note: If read is suspended, the resumed execution starts from the second code (YYYYY == CCL_ReadJump). */ #define CCL_WriteStringJump 0x0A /* Write string and jump: 1:A--D--D--R--E--S--S-000XXXXX 2:LENGTH 3:0000STRIN[0]STRIN[1]STRIN[2] ... ------------------------------ write_string (STRING, LENGTH); IC += ADDRESS; */ #define CCL_WriteArrayReadJump 0x0B /* Write an array element, read, and jump: 1:A--D--D--R--E--S--S-rrrXXXXX 2:LENGTH 3:ELEMENET[0] 4:ELEMENET[1] ... N:A--D--D--R--E--S--S-rrrYYYYY ------------------------------ if (0 <= reg[rrr] < LENGTH) write (ELEMENT[reg[rrr]]); IC += LENGTH + 2; (... pointing at N+1) read (reg[rrr]); IC += ADDRESS; */ /* Note: If read is suspended, the resumed execution starts from the Nth code (YYYYY == CCL_ReadJump). */ #define CCL_ReadJump 0x0C /* Read and jump: 1:A--D--D--R--E--S--S-rrrYYYYY ----------------------------- read (reg[rrr]); IC += ADDRESS; */ #define CCL_Branch 0x0D /* Jump by branch table: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:A--D--D--R--E-S-S[0]000XXXXX 3:A--D--D--R--E-S-S[1]000XXXXX ... ------------------------------ if (0 <= reg[rrr] < CC..C) IC += ADDRESS[reg[rrr]]; else IC += ADDRESS[CC..C]; */ #define CCL_ReadRegister 0x0E /* Read bytes into registers: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:CCCCCCCCCCCCCCCCCCCCrrrXXXXX ... ------------------------------ while (CCC--) read (reg[rrr]); */ #define CCL_WriteExprConst 0x0F /* write result of expression: 1:00000OPERATION000RRR000XXXXX 2:CONSTANT ------------------------------ write (reg[RRR] OPERATION CONSTANT); IC++; */ /* Note: If the Nth read is suspended, the resumed execution starts from the Nth code. */ #define CCL_ReadBranch 0x10 /* Read one byte into a register, and jump by branch table: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:A--D--D--R--E-S-S[0]000XXXXX 3:A--D--D--R--E-S-S[1]000XXXXX ... ------------------------------ read (read[rrr]); if (0 <= reg[rrr] < CC..C) IC += ADDRESS[reg[rrr]]; else IC += ADDRESS[CC..C]; */ #define CCL_WriteRegister 0x11 /* Write registers: 1:CCCCCCCCCCCCCCCCCCCrrrXXXXX 2:CCCCCCCCCCCCCCCCCCCrrrXXXXX ... ------------------------------ while (CCC--) write (reg[rrr]); ... */ /* Note: If the Nth write is suspended, the resumed execution starts from the Nth code. */ #define CCL_WriteExprRegister 0x12 /* Write result of expression 1:00000OPERATIONRrrRRR000XXXXX ------------------------------ write (reg[RRR] OPERATION reg[Rrr]); */ #define CCL_Call 0x13 /* Write a constant: 1:CCCCCCCCCCCCCCCCCCCC000XXXXX ------------------------------ call (CC..C) */ #define CCL_WriteConstString 0x14 /* Write a constant or a string: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX [2:0000STRIN[0]STRIN[1]STRIN[2]] [...] ----------------------------- if (!rrr) write (CC..C) else write_string (STRING, CC..C); IC += (CC..C + 2) / 3; */ #define CCL_WriteArray 0x15 /* Write an element of array: 1:CCCCCCCCCCCCCCCCCCCCrrrXXXXX 2:ELEMENT[0] 3:ELEMENT[1] ... ------------------------------ if (0 <= reg[rrr] < CC..C) write (ELEMENT[reg[rrr]]); IC += CC..C; */ #define CCL_End 0x16 /* Terminate: 1:00000000000000000000000XXXXX ------------------------------ terminate (); */ /* The following two codes execute an assignment arithmetic/logical operation. The form of the operation is like REG OP= OPERAND. */ #define CCL_ExprSelfConst 0x17 /* REG OP= constant: 1:00000OPERATION000000rrrXXXXX 2:CONSTANT ------------------------------ reg[rrr] OPERATION= CONSTANT; */ #define CCL_ExprSelfReg 0x18 /* REG1 OP= REG2: 1:00000OPERATION000RRRrrrXXXXX ------------------------------ reg[rrr] OPERATION= reg[RRR]; */ /* The following codes execute an arithmetic/logical operation. The form of the operation is like REG_X = REG_Y OP OPERAND2. */ #define CCL_SetExprConst 0x19 /* REG_X = REG_Y OP constant: 1:00000OPERATION000RRRrrrXXXXX 2:CONSTANT ------------------------------ reg[rrr] = reg[RRR] OPERATION CONSTANT; IC++; */ #define CCL_SetExprReg 0x1A /* REG1 = REG2 OP REG3: 1:00000OPERATIONRrrRRRrrrXXXXX ------------------------------ reg[rrr] = reg[RRR] OPERATION reg[Rrr]; */ #define CCL_JumpCondExprConst 0x1B /* Jump conditional according to an operation on constant: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:CONSTANT ----------------------------- reg[7] = reg[rrr] OPERATION CONSTANT; if (!(reg[7])) IC += ADDRESS; else IC += 2 */ #define CCL_JumpCondExprReg 0x1C /* Jump conditional according to an operation on register: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:RRR ----------------------------- reg[7] = reg[rrr] OPERATION reg[RRR]; if (!reg[7]) IC += ADDRESS; else IC += 2; */ #define CCL_ReadJumpCondExprConst 0x1D /* Read and jump conditional according to an operation on constant: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:CONSTANT ----------------------------- read (reg[rrr]); reg[7] = reg[rrr] OPERATION CONSTANT; if (!reg[7]) IC += ADDRESS; else IC += 2; */ #define CCL_ReadJumpCondExprReg 0x1E /* Read and jump conditional according to an operation on register: 1:A--D--D--R--E--S--S-rrrXXXXX 2:OPERATION 3:RRR ----------------------------- read (reg[rrr]); reg[7] = reg[rrr] OPERATION reg[RRR]; if (!reg[7]) IC += ADDRESS; else IC += 2; */ #define CCL_Extention 0x1F /* Extended CCL code 1:ExtendedCOMMNDRrrRRRrrrXXXXX 2:ARGUEMENT 3:... ------------------------------ extended_command (rrr,RRR,Rrr,ARGS) */ /* CCL arithmetic/logical operators. */ #define CCL_PLUS 0x00 /* X = Y + Z */ #define CCL_MINUS 0x01 /* X = Y - Z */ #define CCL_MUL 0x02 /* X = Y * Z */ #define CCL_DIV 0x03 /* X = Y / Z */ #define CCL_MOD 0x04 /* X = Y % Z */ #define CCL_AND 0x05 /* X = Y & Z */ #define CCL_OR 0x06 /* X = Y | Z */ #define CCL_XOR 0x07 /* X = Y ^ Z */ #define CCL_LSH 0x08 /* X = Y << Z */ #define CCL_RSH 0x09 /* X = Y >> Z */ #define CCL_LSH8 0x0A /* X = (Y << 8) | Z */ #define CCL_RSH8 0x0B /* X = Y >> 8, r[7] = Y & 0xFF */ #define CCL_DIVMOD 0x0C /* X = Y / Z, r[7] = Y % Z */ #define CCL_LS 0x10 /* X = (X < Y) */ #define CCL_GT 0x11 /* X = (X > Y) */ #define CCL_EQ 0x12 /* X = (X == Y) */ #define CCL_LE 0x13 /* X = (X <= Y) */ #define CCL_GE 0x14 /* X = (X >= Y) */ #define CCL_NE 0x15 /* X = (X != Y) */ #define CCL_ENCODE_SJIS 0x16 /* X = HIGHER_BYTE (SJIS (Y, Z)) r[7] = LOWER_BYTE (SJIS (Y, Z) */ #define CCL_DECODE_SJIS 0x17 /* X = HIGHER_BYTE (DE-SJIS (Y, Z)) r[7] = LOWER_BYTE (DE-SJIS (Y, Z)) */ /* Macros for exit status of CCL program. */ #define CCL_STAT_SUCCESS 0 /* Terminated successfully. */ #define CCL_STAT_SUSPEND 1 /* Terminated because of empty input buffer or full output buffer. */ #define CCL_STAT_INVALID_CMD 2 /* Terminated because of invalid command. */ #define CCL_STAT_QUIT 3 /* Terminated because of quit. */ /* Terminate CCL program successfully. */ #define CCL_SUCCESS \ do { \ ccl->status = CCL_STAT_SUCCESS; \ ccl->ic = CCL_HEADER_MAIN; \ goto ccl_finish; \ } while (0) /* Suspend CCL program because of reading from empty input buffer or writing to full output buffer. When this program is resumed, the same I/O command is executed. */ #define CCL_SUSPEND \ do { \ ic--; \ ccl->status = CCL_STAT_SUSPEND; \ goto ccl_finish; \ } while (0) /* Terminate CCL program because of invalid command. Should not occur in the normal case. */ #define CCL_INVALID_CMD \ do { \ ccl->status = CCL_STAT_INVALID_CMD; \ goto ccl_error_handler; \ } while (0) /* Encode one character CH to multibyte form and write to the current output buffer. If CH is less than 256, CH is written as is. */ #define CCL_WRITE_CHAR(ch) \ do { \ if (!dst) \ CCL_INVALID_CMD; \ else \ { \ unsigned char work[4], *str; \ int len = CHAR_STRING (ch, work, str); \ if (dst + len <= dst_end) \ { \ bcopy (str, dst, len); \ dst += len; \ } \ else \ CCL_SUSPEND; \ } \ } while (0) /* Write a string at ccl_prog[IC] of length LEN to the current output buffer. */ #define CCL_WRITE_STRING(len) \ do { \ if (!dst) \ CCL_INVALID_CMD; \ else if (dst + len <= dst_end) \ for (i = 0; i < len; i++) \ *dst++ = ((XFASTINT (ccl_prog[ic + (i / 3)])) \ >> ((2 - (i % 3)) * 8)) & 0xFF; \ else \ CCL_SUSPEND; \ } while (0) /* Read one byte from the current input buffer into Rth register. */ #define CCL_READ_CHAR(r) \ do { \ if (!src) \ CCL_INVALID_CMD; \ else if (src < src_end) \ r = *src++; \ else if (ccl->last_block) \ { \ ic = ccl->eof_ic; \ goto ccl_finish; \ } \ else \ CCL_SUSPEND; \ } while (0) /* Execute CCL code on SRC_BYTES length text at SOURCE. The resulting text goes to a place pointed by DESTINATION, the length of which should not exceed DST_BYTES. The bytes actually processed is returned as *CONSUMED. The return value is the length of the resulting text. As a side effect, the contents of CCL registers are updated. If SOURCE or DESTINATION is NULL, only operations on registers are permitted. */ #ifdef CCL_DEBUG #define CCL_DEBUG_BACKTRACE_LEN 256 int ccl_backtrace_table[CCL_BACKTRACE_TABLE]; int ccl_backtrace_idx; #endif struct ccl_prog_stack { int *ccl_prog; /* Pointer to an array of CCL code. */ int ic; /* Instruction Counter. */ }; ccl_driver (ccl, source, destination, src_bytes, dst_bytes, consumed) struct ccl_program *ccl; unsigned char *source, *destination; int src_bytes, dst_bytes; int *consumed; { register int *reg = ccl->reg; register int ic = ccl->ic; register int code, field1, field2; register Lisp_Object *ccl_prog = ccl->prog; unsigned char *src = source, *src_end = src + src_bytes; unsigned char *dst = destination, *dst_end = dst + dst_bytes; int jump_address; int i, j, op; int stack_idx = 0; /* For the moment, we only support depth 256 of stack. */ struct ccl_prog_stack ccl_prog_stack_struct[256]; if (ic >= ccl->eof_ic) ic = CCL_HEADER_MAIN; #ifdef CCL_DEBUG ccl_backtrace_idx = 0; #endif for (;;) { #ifdef CCL_DEBUG ccl_backtrace_table[ccl_backtrace_idx++] = ic; if (ccl_backtrace_idx >= CCL_DEBUG_BACKTRACE_LEN) ccl_backtrace_idx = 0; ccl_backtrace_table[ccl_backtrace_idx] = 0; #endif if (!NILP (Vquit_flag) && NILP (Vinhibit_quit)) { /* We can't just signal Qquit, instead break the loop as if the whole data is processed. Don't reset Vquit_flag, it must be handled later at a safer place. */ if (consumed) src = source + src_bytes; ccl->status = CCL_STAT_QUIT; break; } code = XINT (ccl_prog[ic]); ic++; field1 = code >> 8; field2 = (code & 0xFF) >> 5; #define rrr field2 #define RRR (field1 & 7) #define Rrr ((field1 >> 3) & 7) #define ADDR field1 switch (code & 0x1F) { case CCL_SetRegister: /* 00000000000000000RRRrrrXXXXX */ reg[rrr] = reg[RRR]; break; case CCL_SetShortConst: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ reg[rrr] = field1; break; case CCL_SetConst: /* 00000000000000000000rrrXXXXX */ reg[rrr] = XINT (ccl_prog[ic]); ic++; break; case CCL_SetArray: /* CCCCCCCCCCCCCCCCCCCCRRRrrrXXXXX */ i = reg[RRR]; j = field1 >> 3; if ((unsigned int) i < j) reg[rrr] = XINT (ccl_prog[ic + i]); ic += j; break; case CCL_Jump: /* A--D--D--R--E--S--S-000XXXXX */ ic += ADDR; break; case CCL_JumpCond: /* A--D--D--R--E--S--S-rrrXXXXX */ if (!reg[rrr]) ic += ADDR; break; case CCL_WriteRegisterJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; CCL_WRITE_CHAR (i); ic += ADDR; break; case CCL_WriteRegisterReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; CCL_WRITE_CHAR (i); ic++; CCL_READ_CHAR (reg[rrr]); ic += ADDR - 1; break; case CCL_WriteConstJump: /* A--D--D--R--E--S--S-000XXXXX */ i = XINT (ccl_prog[ic]); CCL_WRITE_CHAR (i); ic += ADDR; break; case CCL_WriteConstReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = XINT (ccl_prog[ic]); CCL_WRITE_CHAR (i); ic++; CCL_READ_CHAR (reg[rrr]); ic += ADDR - 1; break; case CCL_WriteStringJump: /* A--D--D--R--E--S--S-000XXXXX */ j = XINT (ccl_prog[ic]); ic++; CCL_WRITE_STRING (j); ic += ADDR - 1; break; case CCL_WriteArrayReadJump: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; j = ccl_prog[ic]; if ((unsigned int) i < j) { i = XINT (ccl_prog[ic + 1 + i]); CCL_WRITE_CHAR (i); } ic += j + 2; CCL_READ_CHAR (reg[rrr]); ic += ADDR - (j + 2); break; case CCL_ReadJump: /* A--D--D--R--E--S--S-rrrYYYYY */ CCL_READ_CHAR (reg[rrr]); ic += ADDR; break; case CCL_ReadBranch: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ CCL_READ_CHAR (reg[rrr]); /* fall through ... */ case CCL_Branch: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ if ((unsigned int) reg[rrr] < field1) ic += XINT (ccl_prog[ic + reg[rrr]]); else ic += XINT (ccl_prog[ic + field1]); break; case CCL_ReadRegister: /* CCCCCCCCCCCCCCCCCCCCrrXXXXX */ while (1) { CCL_READ_CHAR (reg[rrr]); if (!field1) break; code = XINT (ccl_prog[ic]); ic++; field1 = code >> 8; field2 = (code & 0xFF) >> 5; } break; case CCL_WriteExprConst: /* 1:00000OPERATION000RRR000XXXXX */ rrr = 7; i = reg[RRR]; j = XINT (ccl_prog[ic]); op = field1 >> 6; ic++; goto ccl_set_expr; case CCL_WriteRegister: /* CCCCCCCCCCCCCCCCCCCrrrXXXXX */ while (1) { i = reg[rrr]; CCL_WRITE_CHAR (i); if (!field1) break; code = XINT (ccl_prog[ic]); ic++; field1 = code >> 8; field2 = (code & 0xFF) >> 5; } break; case CCL_WriteExprRegister: /* 1:00000OPERATIONRrrRRR000XXXXX */ rrr = 7; i = reg[RRR]; j = reg[Rrr]; op = field1 >> 6; goto ccl_set_expr; case CCL_Call: /* CCCCCCCCCCCCCCCCCCCC000XXXXX */ { Lisp_Object slot; if (stack_idx >= 256 || field1 < 0 || field1 >= XVECTOR (Vccl_program_table)->size || (slot = XVECTOR (Vccl_program_table)->contents[field1], !CONSP (slot)) || !VECTORP (XCONS (slot)->cdr)) { if (stack_idx > 0) { ccl_prog = ccl_prog_stack_struct[0].ccl_prog; ic = ccl_prog_stack_struct[0].ic; } CCL_INVALID_CMD; } ccl_prog_stack_struct[stack_idx].ccl_prog = ccl_prog; ccl_prog_stack_struct[stack_idx].ic = ic; stack_idx++; ccl_prog = XVECTOR (XCONS (slot)->cdr)->contents; ic = CCL_HEADER_MAIN; } break; case CCL_WriteConstString: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ if (!rrr) CCL_WRITE_CHAR (field1); else { CCL_WRITE_STRING (field1); ic += (field1 + 2) / 3; } break; case CCL_WriteArray: /* CCCCCCCCCCCCCCCCCCCCrrrXXXXX */ i = reg[rrr]; if ((unsigned int) i < field1) { j = XINT (ccl_prog[ic + i]); CCL_WRITE_CHAR (j); } ic += field1; break; case CCL_End: /* 0000000000000000000000XXXXX */ if (stack_idx-- > 0) { ccl_prog = ccl_prog_stack_struct[stack_idx].ccl_prog; ic = ccl_prog_stack_struct[stack_idx].ic; break; } CCL_SUCCESS; case CCL_ExprSelfConst: /* 00000OPERATION000000rrrXXXXX */ i = XINT (ccl_prog[ic]); ic++; op = field1 >> 6; goto ccl_expr_self; case CCL_ExprSelfReg: /* 00000OPERATION000RRRrrrXXXXX */ i = reg[RRR]; op = field1 >> 6; ccl_expr_self: switch (op) { case CCL_PLUS: reg[rrr] += i; break; case CCL_MINUS: reg[rrr] -= i; break; case CCL_MUL: reg[rrr] *= i; break; case CCL_DIV: reg[rrr] /= i; break; case CCL_MOD: reg[rrr] %= i; break; case CCL_AND: reg[rrr] &= i; break; case CCL_OR: reg[rrr] |= i; break; case CCL_XOR: reg[rrr] ^= i; break; case CCL_LSH: reg[rrr] <<= i; break; case CCL_RSH: reg[rrr] >>= i; break; case CCL_LSH8: reg[rrr] <<= 8; reg[rrr] |= i; break; case CCL_RSH8: reg[7] = reg[rrr] & 0xFF; reg[rrr] >>= 8; break; case CCL_DIVMOD: reg[7] = reg[rrr] % i; reg[rrr] /= i; break; case CCL_LS: reg[rrr] = reg[rrr] < i; break; case CCL_GT: reg[rrr] = reg[rrr] > i; break; case CCL_EQ: reg[rrr] = reg[rrr] == i; break; case CCL_LE: reg[rrr] = reg[rrr] <= i; break; case CCL_GE: reg[rrr] = reg[rrr] >= i; break; case CCL_NE: reg[rrr] = reg[rrr] != i; break; default: CCL_INVALID_CMD; } break; case CCL_SetExprConst: /* 00000OPERATION000RRRrrrXXXXX */ i = reg[RRR]; j = XINT (ccl_prog[ic]); op = field1 >> 6; jump_address = ++ic; goto ccl_set_expr; case CCL_SetExprReg: /* 00000OPERATIONRrrRRRrrrXXXXX */ i = reg[RRR]; j = reg[Rrr]; op = field1 >> 6; jump_address = ic; goto ccl_set_expr; case CCL_ReadJumpCondExprConst: /* A--D--D--R--E--S--S-rrrXXXXX */ CCL_READ_CHAR (reg[rrr]); case CCL_JumpCondExprConst: /* A--D--D--R--E--S--S-rrrXXXXX */ i = reg[rrr]; op = XINT (ccl_prog[ic]); jump_address = ic++ + ADDR; j = XINT (ccl_prog[ic]); ic++; rrr = 7; goto ccl_set_expr; case CCL_ReadJumpCondExprReg: /* A--D--D--R--E--S--S-rrrXXXXX */ CCL_READ_CHAR (reg[rrr]); case CCL_JumpCondExprReg: i = reg[rrr]; op = XINT (ccl_prog[ic]); jump_address = ic++ + ADDR; j = reg[XINT (ccl_prog[ic])]; ic++; rrr = 7; ccl_set_expr: switch (op) { case CCL_PLUS: reg[rrr] = i + j; break; case CCL_MINUS: reg[rrr] = i - j; break; case CCL_MUL: reg[rrr] = i * j; break; case CCL_DIV: reg[rrr] = i / j; break; case CCL_MOD: reg[rrr] = i % j; break; case CCL_AND: reg[rrr] = i & j; break; case CCL_OR: reg[rrr] = i | j; break; case CCL_XOR: reg[rrr] = i ^ j;; break; case CCL_LSH: reg[rrr] = i << j; break; case CCL_RSH: reg[rrr] = i >> j; break; case CCL_LSH8: reg[rrr] = (i << 8) | j; break; case CCL_RSH8: reg[rrr] = i >> 8; reg[7] = i & 0xFF; break; case CCL_DIVMOD: reg[rrr] = i / j; reg[7] = i % j; break; case CCL_LS: reg[rrr] = i < j; break; case CCL_GT: reg[rrr] = i > j; break; case CCL_EQ: reg[rrr] = i == j; break; case CCL_LE: reg[rrr] = i <= j; break; case CCL_GE: reg[rrr] = i >= j; break; case CCL_NE: reg[rrr] = i != j; break; case CCL_ENCODE_SJIS: ENCODE_SJIS (i, j, reg[rrr], reg[7]); break; case CCL_DECODE_SJIS: DECODE_SJIS (i, j, reg[rrr], reg[7]); break; default: CCL_INVALID_CMD; } code &= 0x1F; if (code == CCL_WriteExprConst || code == CCL_WriteExprRegister) { i = reg[rrr]; CCL_WRITE_CHAR (i); } else if (!reg[rrr]) ic = jump_address; break; default: CCL_INVALID_CMD; } } ccl_error_handler: if (destination) { /* We can insert an error message only if DESTINATION is specified and we still have a room to store the message there. */ char msg[256]; int msglen; switch (ccl->status) { case CCL_STAT_INVALID_CMD: sprintf(msg, "\nCCL: Invalid command %x (ccl_code = %x) at %d.", code & 0x1F, code, ic); #ifdef CCL_DEBUG { int i = ccl_backtrace_idx - 1; int j; msglen = strlen (msg); if (dst + msglen <= dst_end) { bcopy (msg, dst, msglen); dst += msglen; } for (j = 0; j < CCL_DEBUG_BACKTRACE_LEN; j++, i--) { if (i < 0) i = CCL_DEBUG_BACKTRACE_LEN - 1; if (ccl_backtrace_table[i] == 0) break; sprintf(msg, " %d", ccl_backtrace_table[i]); msglen = strlen (msg); if (dst + msglen > dst_end) break; bcopy (msg, dst, msglen); dst += msglen; } } #endif goto ccl_finish; case CCL_STAT_QUIT: sprintf(msg, "\nCCL: Quited."); break; default: sprintf(msg, "\nCCL: Unknown error type (%d).", ccl->status); } msglen = strlen (msg); if (dst + msglen <= dst_end) { bcopy (msg, dst, msglen); dst += msglen; } } ccl_finish: ccl->ic = ic; if (consumed) *consumed = src - source; return dst - destination; } /* Setup fields of the structure pointed by CCL appropriately for the execution of compiled CCL code in VEC (vector of integer). */ setup_ccl_program (ccl, vec) struct ccl_program *ccl; Lisp_Object vec; { int i; ccl->size = XVECTOR (vec)->size; ccl->prog = XVECTOR (vec)->contents; ccl->ic = CCL_HEADER_MAIN; ccl->eof_ic = XINT (XVECTOR (vec)->contents[CCL_HEADER_EOF]); ccl->buf_magnification = XINT (XVECTOR (vec)->contents[CCL_HEADER_BUF_MAG]); for (i = 0; i < 8; i++) ccl->reg[i] = 0; ccl->last_block = 0; ccl->status = 0; } #ifdef emacs DEFUN ("ccl-execute", Fccl_execute, Sccl_execute, 2, 2, 0, "Execute CCL-PROGRAM with registers initialized by REGISTERS.\n\ CCL-PROGRAM is a compiled code generated by `ccl-compile',\n\ no I/O commands should appear in the CCL program.\n\ REGISTERS is a vector of [R0 R1 ... R7] where RN is an initial value\n\ of Nth register.\n\ As side effect, each element of REGISTER holds the value of\n\ corresponding register after the execution.") (ccl_prog, reg) Lisp_Object ccl_prog, reg; { struct ccl_program ccl; int i; CHECK_VECTOR (ccl_prog, 0); CHECK_VECTOR (reg, 1); if (XVECTOR (reg)->size != 8) error ("Invalid length of vector REGISTERS"); setup_ccl_program (&ccl, ccl_prog); for (i = 0; i < 8; i++) ccl.reg[i] = (INTEGERP (XVECTOR (reg)->contents[i]) ? XINT (XVECTOR (reg)->contents[i]) : 0); ccl_driver (&ccl, (char *)0, (char *)0, 0, 0, (int *)0); QUIT; if (ccl.status != CCL_STAT_SUCCESS) error ("Error in CCL program at %dth code", ccl.ic); for (i = 0; i < 8; i++) XSETINT (XVECTOR (reg)->contents[i], ccl.reg[i]); return Qnil; } DEFUN ("ccl-execute-on-string", Fccl_execute_on_string, Sccl_execute_on_string, 3, 3, 0, "Execute CCL-PROGRAM with initial STATUS on STRING.\n\ CCL-PROGRAM is a compiled code generated by `ccl-compile'.\n\ Read buffer is set to STRING, and write buffer is allocated automatically.\n\ STATUS is a vector of [R0 R1 ... R7 IC], where\n\ R0..R7 are initial values of corresponding registers,\n\ IC is the instruction counter specifying from where to start the program.\n\ If R0..R7 are nil, they are initialized to 0.\n\ If IC is nil, it is initialized to head of the CCL program.\n\ Returns the contents of write buffer as a string,\n\ and as side effect, STATUS is updated.") (ccl_prog, status, str) Lisp_Object ccl_prog, status, str; { Lisp_Object val; struct ccl_program ccl; int i, produced; int outbufsize; char *outbuf; struct gcpro gcpro1, gcpro2, gcpro3; CHECK_VECTOR (ccl_prog, 0); CHECK_VECTOR (status, 1); if (XVECTOR (status)->size != 9) error ("Invalid length of vector STATUS"); CHECK_STRING (str, 2); GCPRO3 (ccl_prog, status, str); setup_ccl_program (&ccl, ccl_prog); for (i = 0; i < 8; i++) { if (NILP (XVECTOR (status)->contents[i])) XSETINT (XVECTOR (status)->contents[i], 0); if (INTEGERP (XVECTOR (status)->contents[i])) ccl.reg[i] = XINT (XVECTOR (status)->contents[i]); } if (INTEGERP (XVECTOR (status)->contents[i])) { i = XFASTINT (XVECTOR (status)->contents[8]); if (ccl.ic < i && i < ccl.size) ccl.ic = i; } outbufsize = XSTRING (str)->size * ccl.buf_magnification + 256; outbuf = (char *) xmalloc (outbufsize); if (!outbuf) error ("Not enough memory"); ccl.last_block = 1; produced = ccl_driver (&ccl, XSTRING (str)->data, outbuf, XSTRING (str)->size, outbufsize, (int *)0); for (i = 0; i < 8; i++) XSET (XVECTOR (status)->contents[i], Lisp_Int, ccl.reg[i]); XSETINT (XVECTOR (status)->contents[8], ccl.ic); UNGCPRO; val = make_string (outbuf, produced); free (outbuf); QUIT; if (ccl.status != CCL_STAT_SUCCESS && ccl.status != CCL_STAT_SUSPEND) error ("Error in CCL program at %dth code", ccl.ic); return val; } DEFUN ("register-ccl-program", Fregister_ccl_program, Sregister_ccl_program, 2, 2, 0, "Register CCL program PROGRAM of NAME in `ccl-program-table'.\n\ PROGRAM should be a compiled code of CCL program, or nil.\n\ Return index number of the registered CCL program.") (name, ccl_prog) Lisp_Object name, ccl_prog; { int len = XVECTOR (Vccl_program_table)->size; int i, idx; CHECK_SYMBOL (name, 0); if (!NILP (ccl_prog)) CHECK_VECTOR (ccl_prog, 1); for (i = 0; i < len; i++) { Lisp_Object slot = XVECTOR (Vccl_program_table)->contents[i]; if (!CONSP (slot)) break; if (EQ (name, XCONS (slot)->car)) { XCONS (slot)->cdr = ccl_prog; return make_number (i); } } if (i == len) { Lisp_Object new_table = Fmake_vector (len * 2, Qnil); int j; for (j = 0; j < len; j++) XVECTOR (new_table)->contents[j] = XVECTOR (Vccl_program_table)->contents[j]; Vccl_program_table = new_table; } XVECTOR (Vccl_program_table)->contents[i] = Fcons (name, ccl_prog); return make_number (i); } syms_of_ccl () { staticpro (&Vccl_program_table); Vccl_program_table = Fmake_vector (32, Qnil); DEFVAR_LISP ("font-ccl-encoder-alist", &Vfont_ccl_encoder_alist, "Alist of fontname patterns vs corresponding CCL program.\n\ Each element looks like (REGEXP . CCL-CODE),\n\ where CCL-CODE is a compiled CCL program.\n\ When a font whose name matches REGEXP is used for displaying a character,\n\ CCL-CODE is executed to calculate the code point in the font\n\ from the charset number and position code(s) of the character which are set\n\ in CCL registers R0, R1, and R2 before the execution.\n\ The code point in the font is set in CCL registers R1 and R2\n\ when the execution terminated.\n\ If the font is single-byte font, the register R2 is not used."); Vfont_ccl_encoder_alist = Qnil; defsubr (&Sccl_execute); defsubr (&Sccl_execute_on_string); defsubr (&Sregister_ccl_program); } #endif /* emacs */