Mercurial > emacs
view install-sh @ 53226:dd3018b4785b
Implemented multiple tty support.
README.multi-tty: New file.
src/termchar.h (struct terminal): Renamed to struct tty_output. Added name, type,
input, output, termscript, old_tty, term_initted, old_tty_valid,
background_pixel, foreground_pixel, next fields.
(TERMINAL_*): Renamed to TTY_* for brevity.
(CURRENT_TERMINAL): Renamed to CURTTY for brevity.
(tty_list): New variable.
(TERMINAL_PTR): Removed.
(FRAME_TTY): New function.
(TTY_NAME, TTY_TYPE): New macros.
src/term.c (current_terminal): Removed. (_current_terminal): Removed. (tty_list):
New variable. (OUTPUT, OUTPUT1, OUTPUTL, OUTPUT_IF, OUTPUT1_IF): Added tty
parameter. (set_terminal_modes): Added tty parameter. (reset_terminal_modes):
Added tty parameter. (cursor_to, raw_cursor_to): Updated cmgoto() calls.
(clear_end_of_line, write_glyphs): Add indirection to terminal output, updated
cmcheckmagic() calls. (get_named_tty): New function. (term_dummy_init): New
function. (term_init): Added name parameter, added tty_output return value.
Changed algorithm to update tty_list. Call init_sys_modes() to set up tty
mode on the newly opened terminal device.
(get_current_tty): New function, intended for debugging.
src/termhooks.h (termscript): Removed.
src/w32term.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Removed redundant
definition.
src/macterm.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Ditto.
src/window.c (init_window_once): Call make_terminal_frame with two zero parameters.
src/cm.h (emacs_tputs): New macro to set current_tty, and then call tputs().
(current_tty): New variable, for cmputc().
(cmcheckmagic, cmputc, cmgoto): Added prototypes.
src/cm.c (current_tty): New variable, for cmputc().
(cmputc): Use it.
(cmcheckmagic): Added tty parameter, look up terminal streams there.
(calccost): Added tty parameter. Use emacs_tputs() instead of tputs().
(cmgoto): Added tty parameter. Pass it on to calccost(). Use emacs_tputs()
instead of tputs().
src/dispextern.h (set_terminal_modes, reset_terminal_modes): Added tty parameter.
(term_init): Added name parameter (the filename of the terminal device). Added
return value (struct tty_output).
src/dispnew.c: Replace CURTTY() with local variables throughout the file (where applicable).
(termscript): Moved to struct tty_output.
(terminal_type): Removed.
src/emacs.c (main): Don't call init_sys_modes(), the new term_init() already does that
during init_display().
(shut_down_emacs): Call reset_all_sys_modes() instead of reset_sys_modes().
src/frame.c (Qtty, Qtty_type): New variables.
(syms_of_frame): Initialize them.
(tty_display): Removed.
(make_terminal_frame): New parameters (tty filename and type).
Initialize output_data.tty field instead of output_data.x. Use term_init() to
find the right tty_output. (Use term_dummy_init() during bootstrap.)
(Fmake_terminal_frame): Get device filename and type from frame parameters.
src/frame.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Do the right thing
if the frame is a tty.
(struct frame): New member in output_data: tty.
(make_terminal_frame): Updated of prototype.
src/keyboard.c (Fset_input_mode): Call reset_all_sys_modes(), not
reset_sys_modes(). Ditto with init_sys_modes().
src/lisp.h (tty_output): Added forward declaration.
(init_sys_modes, reset_sys_modes): Updated prototype.
(init_all_sys_modes, reset_all_sys_modes): New prototypes.
src/scroll.c: Replace CURTTY() with local variables throughout the file (where applicable).
src/sysdep.c (old_tty, term_initted, old_tty_valid): Moved to struct tty_output.(
(init_all_sys_modes): New function.
(init_sys_modes): Added tty_output parameter. Use it.
(reset_all_sys_modes): New function.
(reset_sys_modes): Added tty_output parameter. Use it.
src/Makefile.in: Update dependencies.
git-archimport-id: lorentey@elte.hu--2004/emacs--multi-tty--0--patch-2
author | Karoly Lorentey <lorentey@elte.hu> |
---|---|
date | Thu, 25 Dec 2003 06:59:31 +0000 |
parents | 23a1cea22d13 |
children |
line wrap: on
line source
#! /bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0