Mercurial > emacs
view src/s/irix5-0.h @ 53226:dd3018b4785b
Implemented multiple tty support.
README.multi-tty: New file.
src/termchar.h (struct terminal): Renamed to struct tty_output. Added name, type,
input, output, termscript, old_tty, term_initted, old_tty_valid,
background_pixel, foreground_pixel, next fields.
(TERMINAL_*): Renamed to TTY_* for brevity.
(CURRENT_TERMINAL): Renamed to CURTTY for brevity.
(tty_list): New variable.
(TERMINAL_PTR): Removed.
(FRAME_TTY): New function.
(TTY_NAME, TTY_TYPE): New macros.
src/term.c (current_terminal): Removed. (_current_terminal): Removed. (tty_list):
New variable. (OUTPUT, OUTPUT1, OUTPUTL, OUTPUT_IF, OUTPUT1_IF): Added tty
parameter. (set_terminal_modes): Added tty parameter. (reset_terminal_modes):
Added tty parameter. (cursor_to, raw_cursor_to): Updated cmgoto() calls.
(clear_end_of_line, write_glyphs): Add indirection to terminal output, updated
cmcheckmagic() calls. (get_named_tty): New function. (term_dummy_init): New
function. (term_init): Added name parameter, added tty_output return value.
Changed algorithm to update tty_list. Call init_sys_modes() to set up tty
mode on the newly opened terminal device.
(get_current_tty): New function, intended for debugging.
src/termhooks.h (termscript): Removed.
src/w32term.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Removed redundant
definition.
src/macterm.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Ditto.
src/window.c (init_window_once): Call make_terminal_frame with two zero parameters.
src/cm.h (emacs_tputs): New macro to set current_tty, and then call tputs().
(current_tty): New variable, for cmputc().
(cmcheckmagic, cmputc, cmgoto): Added prototypes.
src/cm.c (current_tty): New variable, for cmputc().
(cmputc): Use it.
(cmcheckmagic): Added tty parameter, look up terminal streams there.
(calccost): Added tty parameter. Use emacs_tputs() instead of tputs().
(cmgoto): Added tty parameter. Pass it on to calccost(). Use emacs_tputs()
instead of tputs().
src/dispextern.h (set_terminal_modes, reset_terminal_modes): Added tty parameter.
(term_init): Added name parameter (the filename of the terminal device). Added
return value (struct tty_output).
src/dispnew.c: Replace CURTTY() with local variables throughout the file (where applicable).
(termscript): Moved to struct tty_output.
(terminal_type): Removed.
src/emacs.c (main): Don't call init_sys_modes(), the new term_init() already does that
during init_display().
(shut_down_emacs): Call reset_all_sys_modes() instead of reset_sys_modes().
src/frame.c (Qtty, Qtty_type): New variables.
(syms_of_frame): Initialize them.
(tty_display): Removed.
(make_terminal_frame): New parameters (tty filename and type).
Initialize output_data.tty field instead of output_data.x. Use term_init() to
find the right tty_output. (Use term_dummy_init() during bootstrap.)
(Fmake_terminal_frame): Get device filename and type from frame parameters.
src/frame.h (FRAME_FOREGROUND_PIXEL, FRAME_BACKGROUND_PIXEL): Do the right thing
if the frame is a tty.
(struct frame): New member in output_data: tty.
(make_terminal_frame): Updated of prototype.
src/keyboard.c (Fset_input_mode): Call reset_all_sys_modes(), not
reset_sys_modes(). Ditto with init_sys_modes().
src/lisp.h (tty_output): Added forward declaration.
(init_sys_modes, reset_sys_modes): Updated prototype.
(init_all_sys_modes, reset_all_sys_modes): New prototypes.
src/scroll.c: Replace CURTTY() with local variables throughout the file (where applicable).
src/sysdep.c (old_tty, term_initted, old_tty_valid): Moved to struct tty_output.(
(init_all_sys_modes): New function.
(init_sys_modes): Added tty_output parameter. Use it.
(reset_all_sys_modes): New function.
(reset_sys_modes): Added tty_output parameter. Use it.
src/Makefile.in: Update dependencies.
git-archimport-id: lorentey@elte.hu--2004/emacs--multi-tty--0--patch-2
author | Karoly Lorentey <lorentey@elte.hu> |
---|---|
date | Thu, 25 Dec 2003 06:59:31 +0000 |
parents | 695cf19ef79e |
children | 4ec4240c1973 375f2633d815 |
line wrap: on
line source
#include "usg5-4.h" #define IRIX5 #undef sigsetmask /* use sys_sigsetmask */ #undef _longjmp /* use system versions, not conservative aliases */ #undef _setjmp #define SETPGRP_RELEASES_CTTY #ifdef LIBS_SYSTEM #undef LIBS_SYSTEM #endif #ifdef LIB_STANDARD #undef LIB_STANDARD #endif #ifdef SYSTEM_TYPE #undef SYSTEM_TYPE #endif #define SYSTEM_TYPE "irix" #ifdef SETUP_SLAVE_PTY #undef SETUP_SLAVE_PTY #endif /* thomas@mathematik.uni-bremen.de says this is needed. */ /* Make process_send_signal work by "typing" a signal character on the pty. */ #define SIGNALS_VIA_CHARACTERS /* SGI has all the fancy wait stuff, but we can't include sys/wait.h because it defines BIG_ENDIAN and LITTLE_ENDIAN (ugh!.) Instead we'll just define WNOHANG right here. (An implicit decl is good enough for wait3.) */ /* #define WNOHANG 0x1 */ /* No need to use sprintf to get the tty name--we get that from _getpty. */ #ifdef PTY_TTY_NAME_SPRINTF #undef PTY_TTY_NAME_SPRINTF #endif #define PTY_TTY_NAME_SPRINTF /* No need to get the pty name at all. */ #ifdef PTY_NAME_SPRINTF #undef PTY_NAME_SPRINTF #endif #define PTY_NAME_SPRINTF #ifdef emacs char *_getpty(); #endif /* We need only try once to open a pty. */ #define PTY_ITERATION /* Here is how to do it. */ #define PTY_OPEN \ { \ struct sigaction ocstat, cstat; \ char * name; \ sigemptyset(&cstat.sa_mask); \ cstat.sa_handler = SIG_DFL; \ cstat.sa_flags = 0; \ sigaction(SIGCLD, &cstat, &ocstat); \ name = _getpty (&fd, O_RDWR | O_NDELAY, 0600, 0); \ sigaction(SIGCLD, &ocstat, (struct sigaction *)0); \ if (name == 0) \ return -1; \ if (fd < 0) \ return -1; \ if (fstat (fd, &stb) < 0) \ return -1; \ strcpy (pty_name, name); \ } /* Since we use POSIX constructs in PTY_OPEN, we must force POSIX throughout. */ #define POSIX_SIGNALS /* Info from simon@lia.di.epfl.ch (Simon Leinen) suggests this is needed. */ #define GETPGRP_NO_ARG /* Ulimit(UL_GMEMLIM) is busted... */ #define ULIMIT_BREAK_VALUE 0x14000000 /* Tell process_send_signal to use VSUSP instead of VSWTCH. */ #define PREFER_VSUSP /* define MAIL_USE_FLOCK if the mailer uses flock to interlock access to /usr/spool/mail/$USER. The alternative is that a lock file named /usr/spool/mail/$USER.lock. */ #define MAIL_USE_FLOCK /* use K&R C */ #if 0 #ifndef __GNUC__ #define C_SWITCH_SYSTEM -cckr #endif #endif /* -g used not to work on Irix unless you used gas, and since gcc warns if you use it, turn off the warning. */ /* -g does now work, at least on recent Irix 6 versions with gcc 2.95; I'm not sure about Irix 5 -- fx */ #ifdef __GNUC__ #define C_DEBUG_SWITCH #endif /* Prevent the variable ospeed from being defined by -lcurses because it defines it with too few bytes. */ #define ospeed ospeed_ #define NARROWPROTO 1 #define USE_MMAP_FOR_BUFFERS 1 /* arch-tag: ad0660e0-acf8-46ae-b866-4f3df5b1101b (do not change this comment) */